| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
- A few missing casts required by C++, resulting in:
../../src/gdb/ser-go32.c:795:21: error: invalid conversion from 'const void*' to 'const char*' [-fpermissive]
etc.
- dos_noop has an incompatible prototype with struct serial_ops's
setparity, resulting in:
../../src/gdb/ser-go32.c:874:1: error: invalid conversion from 'int (*)(serial*)' to 'int (*)(serial*, int)' [-fpermissive]
(I thought of calling the ser-base.c default methods, but djgpp
doesn't include ser-base.c in the build.)
gdb/ChangeLog:
2016-07-21 Pedro Alves <palves@redhat.com>
* go32-nat.c (go32_create_inferior): Add cast.
* ser-go32.c (dos_noop): Delete.
(dos_flush_output, dos_setparity, dos_drain_output): New
functions.
(dos_write): Add cast.
(dos_ops): Use dos_flush_output, dos_setparity and
dos_drain_output.
* top.c (do_chdir_cleanup): Add cast.
|
|
remote.c is the last user of immediate_quit. It's relied on to
immediately break the initial remote connection sync up, if the user
does Ctrl-C, assuming that was because the target isn't responding.
At that stage, since the connection isn't synced yet, disconnecting is
the only safe thing to do. This commit reworks that, to not rely on
throwing from the SIGINT signal handler.
So, this commit:
- Introduces the concept of a "quit handler". This is used to
override what does the QUIT macro do when the quit flag is set.
- Makes the "struct serial" reachar / write code call QUIT in the
partial read/write loops, so the current quit handler is invoked
whenever a serial->read_prim / serial->write_prim returns EINTR.
- Makes the "struct serial" reachar / write code call
interruptible_select instead of gdb_select, so that QUITs are
detected in a race-free manner.
- Stops remote.c from setting immediate_quit during the initial
connection.
- Instead, we install a custom quit handler whenever we're calling
into the serial code. This custom quit handler knows to immediately
throw a quit when we're in the initial connection setup, and
otherwise defer handling the quit/Ctrl-C request to later, when
we're safely out of a packet command/response sequence. This also
is what is now responsible for handling "double Ctrl-C because
target connection is stuck/wedged."
- remote.c no longer installs a specialized SIGINT handlers, and
instead re-uses the quit flag. Since we want to rely on the QUIT
macro, the SIGINT handler must also set the quit. And the easiest
is just to not install custom SIGINT handler in remote.c. Let the
standard SIGINT handler do its job of setting the quit flag.
Centralizing SIGINT handlers seems like a good thing to me, anyway.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* defs.h (quit_handler_ftype, quit_handler)
(make_cleanup_override_quit_handler, default_quit_handler): New.
(QUIT): Adjust comments.
* event-top.c (default_quit_handler): New function.
(quit_handler): New global.
(struct quit_handler_cleanup_data): New.
(restore_quit_handler, restore_quit_handler_dtor)
(make_cleanup_override_quit_handler): New.
(async_request_quit): Call QUIT.
* remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
(async_sigint_remote_twice_token, async_sigint_remote_token):
Delete.
(remote_close): Update comments.
(remote_start_remote): Don't set immediate_quit. Set starting_up
earlier.
(remote_serial_quit_handler, remote_unpush_and_throw): New
functions.
(remote_open_1): Clear got_ctrlc_during_io. Set
remote_async_terminal_ours_p unconditionally.
(async_initialize_sigint_signal_handler)
(async_handle_remote_sigint, async_handle_remote_sigint_twice)
(remote_check_pending_interrupt, async_remote_interrupt)
(async_remote_interrupt_twice)
(async_cleanup_sigint_signal_handler, ofunc)
(sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
(remote_terminal_inferior, remote_terminal_ours): Remove async
checks.
(remote_wait_as): Don't install a SIGINT handler in sync mode.
(readchar, remote_serial_write): Override the quit handler with
remote_serial_quit_handler.
(getpkt_or_notif_sane_1): Don't call QUIT.
(initialize_remote_ops): Don't install
remote_check_pending_interrupt.
(_initialize_remote): Don't create async_sigint_remote_token and
async_sigint_remote_twice_token.
* ser-base.c (ser_base_wait_for): Call QUIT and use
interruptible_select.
(ser_base_write): Call QUIT.
* ser-go32.c (dos_readchar, dos_write): Call QUIT.
* ser-unix.c (wait_for): Don't use VTIME. Always take the
gdb_select path, but call QUIT and interruptible_select.
* utils.c (maybe_quit): Call the current quit handler. Don't call
target_check_pending_interrupt.
(defaulted_query, prompt_for_continue): Override the quit handler
with the default quit handler.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is
to change some calls to the xmalloc family of functions to calls to the
equivalents in the XNEW family. This avoids adding an explicit cast, so
it keeps the code a bit more readable. Some of them also map relatively
well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be
possible to do scripted replacements if needed.
I only changed calls that were obviously allocating memory for one or
multiple "objects". Allocation of variable sizes (such as strings or
buffer handling) will be for later (and won't use XNEW).
- xmalloc (sizeof (struct foo)) -> XNEW (struct foo)
- xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num)
- xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo)
- xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num)
- xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num)
- obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo)
- obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num)
- alloca (sizeof (struct foo)) -> XALLOCA (struct foo)
- alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num)
Some instances of xmalloc followed by memset to zero the buffer were
replaced by XCNEW or XCNEWVEC.
I regtested on x86-64, Ubuntu 14.04, but the patch touches many
architecture-specific files. For those I'll have to rely on the
buildbot or people complaining that I broke their gdb.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_add_process): Likewise.
* aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
* ada-exp.y (write_ambiguous_var): Likewise.
* ada-lang.c (resolve_subexp): Likewise.
(user_select_syms): Likewise.
(assign_aggregate): Likewise.
(ada_evaluate_subexp): Likewise.
(cache_symbol): Likewise.
* addrmap.c (allocate_key): Likewise.
(addrmap_create_mutable): Likewise.
* aix-thread.c (sync_threadlists): Likewise.
* alpha-tdep.c (alpha_push_dummy_call): Likewise.
(alpha_gdbarch_init): Likewise.
* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
* arm-linux-nat.c (arm_linux_add_process): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* arm-tdep.c (push_stack_item): Likewise.
(arm_displaced_step_copy_insn): Likewise.
(arm_gdbarch_init): Likewise.
(_initialize_arm_tdep): Likewise.
* avr-tdep.c (push_stack_item): Likewise.
* ax-general.c (new_agent_expr): Likewise.
* block.c (block_initialize_namespace): Likewise.
* breakpoint.c (alloc_counted_command_line): Likewise.
(update_dprintf_command_list): Likewise.
(parse_breakpoint_sals): Likewise.
(decode_static_tracepoint_spec): Likewise.
(until_break_command): Likewise.
(clear_command): Likewise.
(update_global_location_list): Likewise.
(get_breakpoint_objfile_data) Likewise.
* btrace.c (ftrace_new_function): Likewise.
(btrace_set_insn_history): Likewise.
(btrace_set_call_history): Likewise.
* buildsym.c (add_symbol_to_list): Likewise.
(record_pending_block): Likewise.
(start_subfile): Likewise.
(start_buildsym_compunit): Likewise.
(push_subfile): Likewise.
(end_symtab_get_static_block): Likewise.
(buildsym_init): Likewise.
* cli/cli-cmds.c (source_command): Likewise.
* cli/cli-decode.c (add_cmd): Likewise.
* cli/cli-script.c (build_command_line): Likewise.
(setup_user_args): Likewise.
(realloc_body_list): Likewise.
(process_next_line): Likewise.
(copy_command_lines): Likewise.
* cli/cli-setshow.c (do_set_command): Likewise.
* coff-pe-read.c (read_pe_exported_syms): Likewise.
* coffread.c (coff_locate_sections): Likewise.
(coff_symtab_read): Likewise.
(coff_read_struct_type): Likewise.
* common/cleanups.c (make_my_cleanup2): Likewise.
* common/common-exceptions.c (throw_it): Likewise.
* common/filestuff.c (make_cleanup_close): Likewise.
* common/format.c (parse_format_string): Likewise.
* common/queue.h (DEFINE_QUEUE_P): Likewise.
* compile/compile-object-load.c (munmap_list_add): Likewise.
(compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (append_args): Likewise.
* corefile.c (specify_exec_file_hook): Likewise.
* cp-support.c (make_symbol_overload_list): Likewise.
* cris-tdep.c (push_stack_item): Likewise.
(cris_gdbarch_init): Likewise.
* ctf.c (ctf_trace_file_writer_new): Likewise.
* dbxread.c (init_header_files): Likewise.
(add_new_header_file): Likewise.
(init_bincl_list): Likewise.
(dbx_end_psymtab): Likewise.
(start_psymtab): Likewise.
(dbx_end_psymtab): Likewise.
* dcache.c (dcache_init): Likewise.
* dictionary.c (dict_create_hashed): Likewise.
(dict_create_hashed_expandable): Likewise.
(dict_create_linear): Likewise.
(dict_create_linear_expandable): Likewise.
* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
* dummy-frame.c (register_dummy_frame_dtor): Likewise.
* dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
* dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
(decode_frame_entry_1): Likewise.
* dwarf2expr.c (new_dwarf_expr_context): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
* dwarf2read.c (dwarf2_has_info): Likewise.
(create_signatured_type_table_from_index): Likewise.
(dwarf2_read_index): Likewise.
(dw2_get_file_names_reader): Likewise.
(create_all_type_units): Likewise.
(read_cutu_die_from_dwo): Likewise.
(init_tu_and_read_dwo_dies): Likewise.
(init_cutu_and_read_dies): Likewise.
(create_all_comp_units): Likewise.
(queue_comp_unit): Likewise.
(inherit_abstract_dies): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_add_field): Likewise.
(dwarf2_add_typedef): Likewise.
(dwarf2_add_member_fn): Likewise.
(attr_to_dynamic_prop): Likewise.
(abbrev_table_alloc_abbrev): Likewise.
(abbrev_table_read_table): Likewise.
(add_include_dir): Likewise.
(add_file_name): Likewise.
(dwarf_decode_line_header): Likewise.
(dwarf2_const_value_attr): Likewise.
(dwarf_alloc_block): Likewise.
(parse_macro_definition): Likewise.
(set_die_type): Likewise.
(write_psymtabs_to_index): Likewise.
(create_cus_from_index): Likewise.
(dwarf2_create_include_psymtab): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(build_type_psymtab_dependencies): Likewise.
(read_comp_units_from_section): Likewise.
(compute_compunit_symtab_includes): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(read_func_scope): Likewise.
(process_structure_scope): Likewise.
(mark_common_block_symbol_computed): Likewise.
(load_partial_dies): Likewise.
(dwarf2_symbol_mark_computed): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_read_minimal_symbols): Likewise.
* environ.c (make_environ): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* event-loop.c (create_file_handler): Likewise.
(create_async_signal_handler): Likewise.
(create_async_event_handler): Likewise.
(create_timer): Likewise.
* exec.c (build_section_table): Likewise.
* fbsd-nat.c (fbsd_remember_child): Likewise.
* fork-child.c (fork_inferior): Likewise.
* frv-tdep.c (new_variant): Likewise.
* gdbarch.sh (gdbarch_alloc): Likewise.
(append_name): Likewise.
* gdbtypes.c (rank_function): Likewise.
(copy_type_recursive): Likewise.
(add_dyn_prop): Likewise.
* gnu-nat.c (make_proc): Likewise.
(make_inf): Likewise.
(gnu_write_inferior): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
(build_std_type_info_type): Likewise.
* guile/scm-param.c (compute_enum_list): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* guile/scm-value.c (gdbscm_value_call): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
(read_unwind_info): Likewise.
* ia64-tdep.c (ia64_gdbarch_init): Likewise.
* infcall.c (dummy_frame_context_saver_setup): Likewise.
(call_function_by_hand_dummy): Likewise.
* infcmd.c (step_once): Likewise.
(finish_forward): Likewise.
(attach_command): Likewise.
(notice_new_inferior): Likewise.
* inferior.c (add_inferior_silent): Likewise.
* infrun.c (add_displaced_stepping_state): Likewise.
(save_infcall_control_state): Likewise.
(save_inferior_ptid): Likewise.
(_initialize_infrun): Likewise.
* jit.c (bfd_open_from_target_memory): Likewise.
(jit_gdbarch_data_init): Likewise.
* language.c (add_language): Likewise.
* linespec.c (decode_line_2): Likewise.
* linux-nat.c (add_to_pid_list): Likewise.
(add_initial_lwp): Likewise.
* linux-thread-db.c (add_thread_db_info): Likewise.
(record_thread): Likewise.
(info_auto_load_libthread_db): Likewise.
* m32c-tdep.c (m32c_gdbarch_init): Likewise.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* m88k-tdep.c (m88k_analyze_prologue): Likewise.
* macrocmd.c (macro_define_command): Likewise.
* macroexp.c (gather_arguments): Likewise.
* macroscope.c (sal_macro_scope): Likewise.
* macrotab.c (new_macro_table): Likewise.
* mdebugread.c (push_parse_stack): Likewise.
(parse_partial_symbols): Likewise.
(parse_symbol): Likewise.
(psymtab_to_symtab_1): Likewise.
(new_block): Likewise.
(new_psymtab): Likewise.
(mdebug_build_psymtabs): Likewise.
(add_pending): Likewise.
(elfmdebug_build_psymtabs): Likewise.
* mep-tdep.c (mep_gdbarch_init): Likewise.
* mi/mi-main.c (mi_execute_command): Likewise.
* mi/mi-parse.c (mi_parse_argv): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (terminate_minimal_symbol_table): Likewise.
* mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
* msp430-tdep.c (msp430_gdbarch_init): Likewise.
* mt-tdep.c (mt_registers_info): Likewise.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
* nat/linux-btrace.c (linux_enable_bts): Likewise.
(linux_enable_pt): Likewise.
* nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
(linux_xfer_osdata_processgroups): Likewise.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* nto-procfs.c (procfs_meminfo): Likewise.
* objc-lang.c (start_msglist): Likewise.
(selectors_info): Likewise.
(classes_info): Likewise.
(find_methods): Likewise.
* objfiles.c (allocate_objfile): Likewise.
(update_section_map): Likewise.
* osabi.c (gdbarch_register_osabi): Likewise.
(gdbarch_register_osabi_sniffer): Likewise.
* parse.c (start_arglist): Likewise.
* ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
(hwdebug_insert_point): Likewise.
* printcmd.c (display_command): Likewise.
(ui_printf): Likewise.
* procfs.c (create_procinfo): Likewise.
(load_syscalls): Likewise.
(proc_get_LDT_entry): Likewise.
(proc_update_threads): Likewise.
* prologue-value.c (make_pv_area): Likewise.
(pv_area_store): Likewise.
* psymtab.c (extend_psymbol_list): Likewise.
(init_psymbol_list): Likewise.
(allocate_psymtab): Likewise.
* python/py-inferior.c (add_thread_object): Likewise.
* python/py-param.c (compute_enum_values): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/py-varobj.c (py_varobj_iter_next): Likewise.
* python/python.c (ensure_python_env): Likewise.
* record-btrace.c (record_btrace_start_replaying): Likewise.
* record-full.c (record_full_reg_alloc): Likewise.
(record_full_mem_alloc): Likewise.
(record_full_end_alloc): Likewise.
(record_full_core_xfer_partial): Likewise.
* regcache.c (get_thread_arch_aspace_regcache): Likewise.
* remote-fileio.c (remote_fileio_init_fd_map): Likewise.
* remote-notif.c (remote_notif_state_allocate): Likewise.
* remote.c (demand_private_info): Likewise.
(remote_notif_stop_alloc_reply): Likewise.
(remote_enable_btrace): Likewise.
* reverse.c (save_bookmark_command): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
* rx-tdep.c (rx_gdbarch_init): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
* ser-go32.c (dos_get_tty_state): Likewise.
(dos_copy_tty_state): Likewise.
* ser-mingw.c (ser_windows_open): Likewise.
(ser_console_wait_handle): Likewise.
(ser_console_get_tty_state): Likewise.
(make_pipe_state): Likewise.
(net_windows_open): Likewise.
* ser-unix.c (hardwire_get_tty_state): Likewise.
(hardwire_copy_tty_state): Likewise.
* solib-aix.c (solib_aix_new_lm_info): Likewise.
* solib-dsbt.c (dsbt_current_sos): Likewise.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
(frv_relocate_main_executable): Likewise.
* solib-spu.c (spu_bfd_fopen): Likewise.
* solib-svr4.c (lm_info_read): Likewise.
(svr4_copy_library_list): Likewise.
(svr4_default_sos): Likewise.
* source.c (find_source_lines): Likewise.
(line_info): Likewise.
(add_substitute_path_rule): Likewise.
* spu-linux-nat.c (spu_bfd_open): Likewise.
* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
* stabsread.c (dbx_lookup_type): Likewise.
(read_type): Likewise.
(read_member_functions): Likewise.
(read_struct_fields): Likewise.
(read_baseclasses): Likewise.
(read_args): Likewise.
(_initialize_stabsread): Likewise.
* stack.c (func_command): Likewise.
* stap-probe.c (handle_stap_probe): Likewise.
* symfile.c (addrs_section_sort): Likewise.
(addr_info_make_relative): Likewise.
(load_section_callback): Likewise.
(add_symbol_file_command): Likewise.
(init_filename_language_table): Likewise.
* symtab.c (create_filename_seen_cache): Likewise.
(sort_search_symbols_remove_dups): Likewise.
(search_symbols): Likewise.
* target.c (make_cleanup_restore_target_terminal): Likewise.
* thread.c (new_thread): Likewise.
(enable_thread_stack_temporaries): Likewise.
(make_cleanup_restore_current_thread): Likewise.
(thread_apply_all_command): Likewise.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* top.c (gdb_readline_wrapper): Likewise.
* tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
* tracepoint.c (trace_find_line_command): Likewise.
(all_tracepoint_actions_and_cleanup): Likewise.
(make_cleanup_restore_current_traceframe): Likewise.
(get_uploaded_tp): Likewise.
(get_uploaded_tsv): Likewise.
* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
(tui_alloc_win_info): Likewise.
(tui_alloc_content): Likewise.
(tui_add_content_elements): Likewise.
* tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
(tui_set_disassem_content): Likewise.
* ui-file.c (ui_file_new): Likewise.
(stdio_file_new): Likewise.
(tee_file_new): Likewise.
* utils.c (make_cleanup_restore_integer): Likewise.
(add_internal_problem_command): Likewise.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* valops.c (find_oload_champ): Likewise.
* value.c (allocate_value_lazy): Likewise.
(record_latest_value): Likewise.
(create_internalvar): Likewise.
* varobj.c (install_variable): Likewise.
(new_variable): Likewise.
(new_root_variable): Likewise.
(cppush): Likewise.
(_initialize_varobj): Likewise.
* windows-nat.c (windows_make_so): Likewise.
* x86-nat.c (x86_add_process): Likewise.
* xcoffread.c (arrange_linetable): Likewise.
(allocate_include_entry): Likewise.
(process_linenos): Likewise.
(SYMBOL_DUP): Likewise.
(xcoff_start_psymtab): Likewise.
(xcoff_end_psymtab): Likewise.
* xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/gdbserver/ChangeLog:
* ax.c (gdb_parse_agent_expr): Likewise.
(compile_bytecodes): Likewise.
* dll.c (loaded_dll): Likewise.
* event-loop.c (append_callback_event): Likewise.
(create_file_handler): Likewise.
(create_file_event): Likewise.
* hostio.c (handle_open): Likewise.
* inferiors.c (add_thread): Likewise.
(add_process): Likewise.
* linux-aarch64-low.c (aarch64_linux_new_process): Likewise.
* linux-arm-low.c (arm_new_process): Likewise.
(arm_new_thread): Likewise.
* linux-low.c (add_to_pid_list): Likewise.
(linux_add_process): Likewise.
(handle_extended_wait): Likewise.
(add_lwp): Likewise.
(enqueue_one_deferred_signal): Likewise.
(enqueue_pending_signal): Likewise.
(linux_resume_one_lwp_throw): Likewise.
(linux_resume_one_thread): Likewise.
(linux_read_memory): Likewise.
(linux_write_memory): Likewise.
* linux-mips-low.c (mips_linux_new_process): Likewise.
(mips_linux_new_thread): Likewise.
(mips_add_watchpoint): Likewise.
* linux-x86-low.c (initialize_low_arch): Likewise.
* lynx-low.c (lynx_add_process): Likewise.
* mem-break.c (set_raw_breakpoint_at): Likewise.
(set_breakpoint): Likewise.
(add_condition_to_breakpoint): Likewise.
(add_commands_to_breakpoint): Likewise.
(clone_agent_expr): Likewise.
(clone_one_breakpoint): Likewise.
* regcache.c (new_register_cache): Likewise.
* remote-utils.c (look_up_one_symbol): Likewise.
* server.c (queue_stop_reply): Likewise.
(start_inferior): Likewise.
(queue_stop_reply_callback): Likewise.
(handle_target_event): Likewise.
* spu-low.c (fetch_ppc_memory): Likewise.
(store_ppc_memory): Likewise.
* target.c (set_target_ops): Likewise.
* thread-db.c (thread_db_load_search): Likewise.
(try_thread_db_load_1): Likewise.
* tracepoint.c (add_tracepoint): Likewise.
(add_tracepoint_action): Likewise.
(create_trace_state_variable): Likewise.
(cmd_qtdpsrc): Likewise.
(cmd_qtro): Likewise.
(add_while_stepping_state): Likewise.
* win32-low.c (child_add_thread): Likewise.
(get_image_name): Likewise.
|
|
The "set serial parity" command allows the user to control which
parity to use when communicating over a serial connection, rather
than having the parity hardcoded to none.
gdb/ChangeLog:
* NEWS: Mention set/show serial parity command.
* monitor.c (monitor_open): Call serial_setparity.
* remote.c (remote_open_1): Likewise.
* ser-base.c (ser_base_serparity): New function.
* ser-base.h (ser_base_setparity): Add declaration.
* ser-go32.c (dos_ops): Set "setparity" field.
* ser-mingw.c (ser_windows_raw): Do not set state.fParity and
state.Parity.
(ser_windows_setparity): New function.
(hardwire_ops): Add ser_windows_setparity.
(tty_ops): Add NULL for setparity field.
(pipe_ops): Add ser_base_setparity.
(tcp_ops): Likewise.
* ser-pipe.c (pipe_ops): Likewise.
* ser-tcp.c (tcp_ops): Likewise.
* ser-unix.c (hardwire_setparity): Add declaration.
(hardwire_raw): Don't reset PARENB flag.
(hardwire_setparity): New function.
(hardwire_ops): Add hardwire_setparity.
* serial.c (serial_setparity): New function.
(serial_parity): New global.
(parity_none, parity_odd, parity_even, parity_enums, parity):
New static globals.
(set_parity): New function.
(_initialize_serial): Add set/show serial parity commands.
* serial.h (GDBPARITY_NONE): Define.
(GDBPARITY_ODD): Define.
(GDBPARITY_EVEN): Define.
(serial_setparity) Add declaration.
(struct serial_ops): Add setparity field.
* target.h (serial_parity): Add declaration.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote configuration): Document "set/show
serial parity" command.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
|
|
|
|
I noticed that the serial_ops vtable is not const, but really it ought
to be.
This patch constifies it, removing the only mutable field in the
process.
Tested by rebuilding on x86-64 Fedora 18, both natively and using the
mingw cross tools.
2013-12-19 Tom Tromey <tromey@redhat.com>
* serial.c (serial_ops_p): New typedef.
(serial_ops_list): Now a VEC.
(serial_interface_lookup): Return const. Use VEC_iterate.
(serial_add_interface): Make parameter const.
(serial_open): Update.
(serial_fdopen_ops): Make 'ops' const.
(serial_pipe): Update.
* ser-tcp.c (_initialize_ser_tcp): Update.
* ser-pipe.c (_initialize_ser_pipe): Update.
* ser-unix.c (_initialize_ser_hardwire): Update.
* ser-mingw.c (_initialize_ser_windows): Update.
* ser-go32.c (dos_ops): Now const. Update.
* serial.h (struct serial) <ops>: Now const.
(struct serial_ops) <next>: Remove.
(serial_add_interface): Make parameter const.
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
While remote.c works with "char *" buffers most of the time, other
remote targets have binary-ish-er protocols, and choose to use
"unsigned char" throughout, like e.g., remote-mips.c or
remote-m32r-sdi.c. That results in -Wpointer-sign warnings in those
targets, unless we add casts in calls to serial_write. Since
serial_write is only concerned about sending raw host bytes out, and
serial_ops->write_prim already works with "void *"/"size_t", a similar
interface to the "write" or "send" system calls, I find it natural to
change serial_write's prototype accordingly, avoiding the need for
casts.
Tested on x86_64 Fedora 17, and also by building x86_64-mingw32
and DJGPP/go32 -hosted gdbs.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* ser-base.c (ser_base_write): Change prototype -- take 'void *'
buffer and size_t size. Adjust.
* ser-base.h (ser_base_write): Adjust.
* ser-go32.c (cnts): Change type to size_t.
(dos_write): Change prototype -- take 'void *'
buffer and size_t size. Adjust.
(dos_info): Print elements of 'cnts' as unsigned long.
* serial.c (serial_write): Likewise.
* serial.h (serial_write): Adjust.
(struct serial_ops) <write>: Change prototype -- take 'void *'
buffer and size_t size. Adjust.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* go32-nat.c: Declare _initialize_go32_nat.
* ser-go32.c: Declare _initialize_ser_dos.
* top.c (do_chdir_cleanup): Add 'static'.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
(terminal_save_ours): Remove misleading comment.
(inflow_inferior_data_cleanup): Free ttystate.
(inflow_inferior_exit): Likewise.
(copy_terminal_info): Copy ttystate.
* serial.c (serial_copy_tty_state): New function.
* serial.h (serial_copy_tty_state): Add prototype.
(struct serial_ops): Add copy_tty_state callback.
* ser-base.c (ser_base_copy_tty_state): New function.
* ser-base.h (ser_base_copy_tty_state): Add prototype.
* ser-go32.c (dos_copy_tty_state): New function.
(dos_ops): Install copy_tty_state callback.
* ser-mingw.c (_initialize_ser_windows): Likewise.
* ser-pipe.c (_initialize_ser_pipe): Likewise.
* ser-unix.c (hardwire_copy_tty_state): New function.
(_initialize_ser_hardwire): Install it.
|
|
* s390-tdep.c: Comment cleanup, mostly periods and spaces.
* score-tdep.c: Ditto.
* score-tdep.h: Ditto.
* ser-base.c: Ditto.
* ser-go32.c: Ditto.
* serial.c: Ditto.
* serial.h: Ditto.
* ser-mingw.c: Ditto.
* ser-pipe.c: Ditto.
* ser-tcp.c: Ditto.
* ser-unix.c: Ditto.
* sh64-tdep.c: Ditto.
* shnbsd-nat.c: Ditto.
* sh-tdep.c: Ditto.
* sh-tdep.h: Ditto.
* solib.c: Ditto.
* solib-darwin.c: Ditto.
* solib-frv.c: Ditto.
* solib.h: Ditto.
* solib-irix.c: Ditto.
* solib-osf.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.
* solib-spu.c: Ditto.
* solib-sunos.c: Ditto.
* solib-svr4.c: Ditto.
* solist.h: Ditto.
* sol-thread.c: Ditto.
* somread.c: Ditto.
* source.c: Ditto.
* source.h: Ditto.
* sparc64-linux-tdep.c: Ditto.
* sparc64-tdep.c: Ditto.
* sparc-linux-nat.c: Ditto.
* sparc-linux-tdep.c: Ditto.
* sparc-sol2-nat.c: Ditto.
* sparc-sol2-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* spu-tdep.c: Ditto.
* stabsread.c: Ditto.
* stabsread.h: Ditto.
* stack.c: Ditto.
* symfile.c: Ditto.
* symfile.h: Ditto.
* symmisc.c: Ditto.
* symtab.c: Ditto.
* symtab.h: Ditto.
* target.c: Ditto.
* target-descriptions.c: Ditto.
* target-descriptions.h: Ditto.
* target.h: Ditto.
* target-memory.c: Ditto.
* terminal.h: Ditto.
* thread.c: Ditto.
* top.c: Ditto.
* tracepoint.c: Ditto.
* tracepoint.h: Ditto.
* trad-frame.h: Ditto.
* typeprint.c: Ditto.
|
|
|
|
|
|
* serial.c (serial_interface_lookup): Take a const char pointer.
(serial_fdopen): Rename to ...
(serial_fdopen_ops): ... this. Add an OPS parameter and use it.
Call the OPS' fdopen function if there is one.
(serial_fdopen): Rewrite as wrapper to serial_fdopen_ops.
(serial_pipe): New.
(struct serial_ops) <fdopen>: New field.
* ser-mingw.c (free_pipe_state):
(free_pipe_state): Close output on non-pex pipes.
(pipe_windows_fdopen): New.
(gdb_pipe): New.
(_initialize_ser_windows): Register pipe_windows_fdopen.
* ser-go32.c (gdb_pipe): New.
* ser-pipe.c (pipe_close): Close file descriptor even if there's
no state pointer.
(pipe_ops): Delete.
(gdb_pipe): New.
|
|
* scm-exp.c: White space.
* scm-lang.c: White space.
* scm-valprint.c: White space.
* sentinel-frame.c: White space.
* ser-base.c: White space.
* ser-go32.c: White space.
* serial.c: White space.
* ser-mingw.c: White space.
* ser-pipe.c: White space.
* ser-tcp.c: White space.
* ser-unix.c: White space.
* solib.c: White space.
* solib-darwin.c: White space.
* solib-frv.c: White space.
* solib-irix.c: White space.
* solib-osf.c: White space.
* solib-pa64.c: White space.
* solib-som.c: White space.
* solib-spu.c: White space.
* solib-svr4.c: White space.
* solib-target.c: White space.
* source.c: White space.
* stabsread.c: White space.
* stack.c: White space.
* std-regs.c: White space.
* symfile.c: White space.
* symmisc.c: White space.
* symtab.c: White space.
|
|
Automatic update by copyright.sh.
|
|
|
|
|
|
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
|
|
|
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
|
|
Use add_setshow_zinteger_cmd through out. Re-sync gdbarch.sh
and gdbarch.c.
* breakpoint.c, frame.c, gdb-events.sh, gdbarch.sh: Update.
* gdbtypes.c, infrun.c, linux-nat.c, maint.c, monitor.c: Update.
* pa64solib.c, parse.c, remote-mips.c, ser-go32.c: Update.
* serial.c, solib-frv.c, somsolib.c, target.c, top.c: Update.
* varobj.c, cli/cli-cmds.c: Update.
* gdbarch.c, gdb-events.c: Regenerate.
|
|
Mark up add_com, add_info and add_prefix_cmd.
* breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
* exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
* go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
* maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
* ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
* remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
* remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
* remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
* sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
* symfile.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
* win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
* tui/tui-stack.c, tui/tui-win.c: Update.
|
|
* cli/cli-decode.c (deprecated_add_show_from_set): Deprecate.
* xcoffsolib.c (_initialize_xcoffsolib): Update.
* wince.c (_initialize_wince): Update.
* win32-nat.c (_initialize_win32_nat): Update.
* varobj.c (_initialize_varobj): Update.
* valops.c (_initialize_valops): Update.
* utils.c (initialize_utils, initialize_utils): Update.
* tui/tui-win.c (_initialize_tui_win): Update.
* top.c (init_main): Update.
* symfile.c (_initialize_symfile): Update.
* source.c (_initialize_source): Update.
* somsolib.c (_initialize_som_solib): Update.
* solib.c (_initialize_solib): Update.
* solib-frv.c (_initialize_frv_solib): Update.
* serial.c (_initialize_serial): Update.
* ser-go32.c (_initialize_ser_dos, _initialize_ser_dos): Update.
* remote.c (_initialize_remote, _initialize_remote): Update.
* remote-vx.c (_initialize_vx): Update.
* remote-utils.c (_initialize_sr_support): Update.
* remote-sds.c (_initialize_remote_sds): Update.
* remote-mips.c (_initialize_remote_mips): Update.
* remote-e7000.c (_initialize_remote_e7000): Update.
* proc-api.c (_initialize_proc_api): Update.
* printcmd.c: Update.
* parse.c (_initialize_parse): Update.
* pa64solib.c (_initialize_pa64_solib): Update.
* p-valprint.c (_initialize_pascal_valprint): Update.
* monitor.c (_initialize_remote_monitors): Update.
* mips-tdep.c (_initialize_mips_tdep): Update.
* mcore-tdep.c (_initialize_mcore_tdep): Update.
* maint.c (_initialize_maint_cmds): Update.
* lin-lwp.c (_initialize_lin_lwp): Update.
* language.c (_initialize_language): Update.
* kod.c (_initialize_kod): Update.
* infrun.c (set_schedlock_func, _initialize_infrun): Update.
* i386-tdep.c (_initialize_i386_tdep): Update.
* gdbtypes.c (build_gdbtypes, _initialize_gdbtypes): Update.
* gdbarch.sh: Update.
* gdbarch.c: Re-generate.
* gdb-events.sh: Update.
* gdb-events.c: Re-generate.
* frame.c (_initialize_frame): Update.
* exec.c: Update.
* demangle.c (_initialize_demangler): Update.
* dcache.c (_initialize_dcache): Update.
* cris-tdep.c (_initialize_cris_tdep, cris_version_update): Update.
* cp-valprint.c (_initialize_cp_valprint): Update.
* corefile.c (_initialize_core): Update.
* command.h: Update.
* cli/cli-decode.h: Update.
* cli/cli-cmds.c (init_cli_cmds): Update.
* charset.c (_initialize_charset): Update.
* breakpoint.c (_initialize_breakpoint): Update.
* arm-tdep.c (_initialize_arm_tdep_initialize_arm_tdep): Update.
* alpha-tdep.c (_initialize_alpha_tdep): Update.
* aix-thread.c (_initialize_aix_thread): Update.
|
|
* cris-tdep.c: Fix function declaration indentation.
* dwarfread.c, gdbcore.h, gdbtypes.h, i386v-nat.c: Ditto.
* mips-tdep.c, monitor.h, parse.c, proc-utils.h: Ditto.
* rs6000-nat.c, ser-go32.c, somread.c, stabsread.c: Ditto.
* symfile.h, symtab.h, target.c, target.h, value.h: Ditto.
* xcoffread.c, config/pa/tm-hppa.h: Ditto.
* config/sparc/tm-sp64.h, config/sparc/tm-sparc.h: Ditto.
|
|
|
|
* utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
* values.c (unpack_double): Remove obsolete check for _MSC_VER.
* defs.h: Ditto.
* m32r-rom.c: Ditto.
* p-exp.y: Ditto.
* ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for faster
compilation.
(get_ds_base): Remove _MSC_VER version of this function.
* nindy-share/ttyflush.c: Ditto. X
* rdi-share/host.h: Ditto. X
* ser-go32.c (dos_readchar): Remove call to obsolete function.
* remote-sim.c (gdb_os_poll_quit): Ditto.
* remote-e7000.c (expect): Remove obsolete #if 0'ed code.
* main.c (captured_main): Eliminate special Cygwin checks.
* ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
|
|
* ser-go32.c (rawclock): Remove prototype; include time.h instead.
(ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
(top level) <string.h>: Include gdb_string.h instead.
(dos_noop, dos_raw, dos_noflush_set_tty_state)
(dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
* go32-nat.c (go32_create_inferior): Move the declaration of
`environ' to here from the top level.
(top level) <_initialize_go32_nat>: Remove redundant prototype.
<gdb_string.h>: Include it instead of string.h.
(store_register): Call register_buffer instead of accessing
registers[] directly.
(redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
(redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
the function names at the start of the line.
(go32_set_dr): Throw internal_error if the argument is not a valid
debug register number.
(go32_open, go32_close, go32_attach, go32_detach, go32_resume)
(go32_wait, go32_xfer_memory, go32_files_info)
(go32_terminal_info): Remove ATTRIBUTE_UNUSED.
|
|
|
|
UART_FIFO_WORKS is defined. Otherwise use outportb.
From Francisco Pastor <fpastor.etra-id@etra.es>
|
|
|
|
|
|
GCC 2.9X.
|
|
(dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
to ISO C. Use ATTRIBUTE_UNUSED to avoid compiler warnings.
(dos_info): Avoid compiler warning when printing a ptrdiff_t.
|
|
not opened by dos_open, but let the 3 standard handles go through
unharmed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
SERIAL_FLUSH_OUTPUT.
* serial.h (struct serial_ops): Add drain_output, pointer to
function that waits for output to drain.
(SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
* ser-unix.c (hardwire_drain_output): New function and prototype.
* ser-unix.c (hardwire_ops): Add entry for drain_output function.
* ser-tcp.c (tcp_ops): Ditto.
* ser-ocd.c (ocd_ops): Ditto.
* ser-mac.c (mac_ops): Ditto.
* ser-go32.c (dos_ops): Ditto.
* ser-e7kpc.c (e7000pc_ops): Ditto.
|
|
|
