| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
According to bug 28056, running an s390x binary gives:
(gdb) run
Starting program: /usr/bin/ls
/home/ubuntu/tmp/gdb-11.0.90.20210705/gdb/linux-tdep.c:2550: internal-error: displaced_step_prepare_status linux_displaced_step_prepare(gdbarch*, thread_info*, CORE_ADDR&): Assertion `gdbarch_data->num_disp_step_buffers > 0' failed.
This is because the s390 architecture registers some Linux-specific
displaced stepping callbacks in the OS-agnostic s390_gdbarch_init:
set_gdbarch_displaced_step_prepare (gdbarch, linux_displaced_step_prepare);
set_gdbarch_displaced_step_finish (gdbarch, linux_displaced_step_finish);
set_gdbarch_displaced_step_restore_all_in_ptid
(gdbarch, linux_displaced_step_restore_all_in_ptid);
But then the Linux-specific s390_linux_init_abi_any passes
num_disp_step_buffers=0 to linux_init_abi:
linux_init_abi (info, gdbarch, 0);
The problem happens when linux_displaced_step_prepare is called for the
first time. It tries to allocate the displaced stepping buffers, but
sees that the number of displaced stepping buffers for that architecture
is 0, which is unexpected / invalid.
s390_gdbarch_init should not register the linux_* callbacks, that is
expected to be done by linux_init_abi. If debugging a bare-metal s390
program, or an s390 program on another OS GDB doesn't know about, we
wouldn't want to use them. We would either register no callbacks, if
displaced stepping isn't supported, or register a different set of
callbacks if we wanted to support displaced stepping in those cases.
The commit that refactored the displaced stepping machinery and
introduced these set_gdbarch_displaced_step_* calls is 187b041e2514
("gdb: move displaced stepping logic to gdbarch, allow starting
concurrent displaced steps"). However, even before that,
s390_gdbarch_init did:
set_gdbarch_displaced_step_location (gdbarch, linux_displaced_step_location);
... which already seemed wrong. The Linux-specific callback was used
even for non-Linux system. Maybe that was on purpose, because it would
also happen to work in some other non-Linux case, or maybe it was simply
a mistake. I'll assume that this was a small mistake when
s390-tdep.{h,c} where factored out of s390-linux-tdep.c, in d6e589456475
("s390: Split up s390-linux-tdep.c into two files").
Fix this by removing the setting of these displaced step callbacks from
s390_gdbarch_init. Instead, pass num_disp_step_buffers=1 to
linux_init_abi, in s390_linux_init_abi_any. Doing so will cause
linux_init_abi to register these same callbacks. It will also mean that
when debugging a bare-metal s390 executable or an executable on another
OS that GDB doesn't know about, gdbarch_displaced_step_prepare won't be
set, so displaced stepping won't be used.
This patch will need to be merged in the gdb-11-branch, since this is a
GDB 11 regression, so here's the ChangeLog entry:
gdb/ChangeLog:
* s390-linux-tdep.c (s390_linux_init_abi_any): Pass 1 (number
of displaced stepping buffers to linux_init_abi.
* s390-tdep.c (s390_gdbarch_init): Don't set the Linux-specific
displaced-stepping gdbarch callbacks.
Change-Id: Ieab2f8990c78fde845ce7378d6fd4ee2833800d5
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28056
|
|
I wrote this while debugging a problem where the expected unwinder for a
frame wasn't used. It adds messages to show which unwinders are
considered for a frame, why they are not selected (if an exception is
thrown), and finally which unwinder is selected in the end.
To be able to show a meaningful, human-readable name for the unwinders,
add a "name" field to struct frame_unwind, and update all instances to
include a name.
Here's an example of the output:
[frame] frame_unwind_find_by_frame: this_frame=0
[frame] frame_unwind_try_unwinder: trying unwinder "dummy"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "dwarf2 tailcall"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "inline"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "jit"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "python"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "amd64 epilogue"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "i386 epilogue"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "dwarf2"
[frame] frame_unwind_try_unwinder: yes
gdb/ChangeLog:
* frame-unwind.h (struct frame_unwind) <name>: New. Update
instances everywhere to include this field.
* frame-unwind.c (frame_unwind_try_unwinder,
frame_unwind_find_by_frame): Add debug messages.
Change-Id: I813f17777422425f0d08b22499817b23922e8ddb
|
|
I wrote a small script to spot a pattern of indentation mistakes I saw
happened in breakpoint.c. And while at it I ran it on all files and
fixed what I found. No behavior changes intended, just indentation and
addition / removal of curly braces.
gdb/ChangeLog:
* Fix some indentation mistakes throughout.
gdbserver/ChangeLog:
* Fix some indentation mistakes throughout.
Change-Id: Ia01990c26c38e83a243d8f33da1d494f16315c6e
|
|
The current_top_target function is a hidden dependency on the current
inferior. Since I'd like to slowly move towards reducing our dependency
on the global current state, remove this function and make callers use
current_inferior ()->top_target ()
There is no expected change in behavior, but this one step towards
making those callers use the inferior from their context, rather than
refer to the global current inferior.
gdb/ChangeLog:
* target.h (current_top_target): Remove, make callers use the
current inferior instead.
* target.c (current_top_target): Remove.
Change-Id: Iccd457036f84466cdaa3865aa3f9339a24ea001d
|
|
The code to access the target section table can be made more const, so
lets do that. There should be no user visible changes after this
commit.
gdb/ChangeLog:
* gdb/bfd-target.c (class target_bfd) <get_section_table>: Make
return type const.
* gdb/exec.c (struct exec_target) <get_section_table>: Likewise.
(section_table_read_available_memory): Make local const.
(exec_target::xfer_partial): Make local const.
(print_section_info): Make parameter const.
* gdb/exec.h (print_section_info): Likewise.
* gdb/ppc64-tdep.c (ppc64_convert_from_func_ptr_addr): Make local
const.
* gdb/record-btrace.c (record_btrace_target::xfer_partial):
Likewise.
* gdb/remote.c (remote_target::remote_xfer_live_readonly_partial):
Likewise.
* gdb/s390-tdep.c (s390_load): Likewise.
* gdb/solib-dsbt.c (scan_dyntag): Likewise.
* gdb/solib-svr4.c (scan_dyntag): Likewise.
* gdb/target-debug.h (target_debug_print_target_section_table_p):
Rename to...
(target_debug_print_const_target_section_table_p): ...this.
* gdb/target-delegates.c: Regenerate.
* gdb/target.c (target_get_section_table): Make return type const.
(target_section_by_addr): Likewise. Also make some locals const.
(memory_xfer_partial_1): Make some locals const.
* gdb/target.h (struct target_ops) <get_section_table>: Make
return type const.
(target_section_by_addr): Likewise.
(target_get_section_table): Likewise.
|
|
With the new member functions for struct trad_frame_saved_reg, there is no
need to invoke some of the set/get functions anymore. This patch removes
those and adjusts all callers.
Even though the most natural initial state of a saved register value is
UNKNOWN, there are target backends relying on the previous initial state
of REALREG set to a register's own number. I noticed this in at least a
couple targets: aarch64 and riscv.
Because of that, I decided to keep the reset function that sets the set of
register values to REALREG. I can't exercise all the targets to make sure
the initial state change won't break things, hence why it is risky to change
the default.
Validated with --enable-targets=all on aarch64-linux Ubuntu 18.04/20.04.
gdb/ChangeLog
2021-01-19 Luis Machado <luis.machado@linaro.org>
* trad-frame.h (trad_frame_saved_reg) <set_value_bytes>: Allocate
memory and save data.
(trad_frame_set_value, trad_frame_set_realreg, trad_frame_set_addr)
(trad_frame_set_unknown, trad_frame_set_value_bytes)
(trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p)
(trad_frame_value_bytes_p): Remove.
(trad_frame_reset_saved_regs): Adjust documentation.
* trad-frame.c (trad_frame_alloc_saved_regs): Initialize via a
constructor and reset the state of the registers.
(trad_frame_value_p, trad_frame_addr_p, trad_frame_realreg_p)
(trad_frame_value_bytes_p, trad_frame_set_value)
(trad_frame_set_realreg, trad_frame_set_addr)
(trad_frame_set_unknown, trad_frame_set_value_bytes): Remove.
(trad_frame_set_reg_realreg): Update to call member function.
(trad_frame_set_reg_addr, trad_frame_set_reg_value_bytes): Likewise.
(trad_frame_get_prev_register): Likewise.
* aarch64-tdep.c (aarch64_analyze_prologue)
(aarch64_analyze_prologue_test, aarch64_make_prologue_cache_1)
(aarch64_prologue_prev_register): Update to use member functions.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise.
* alpha-tdep.c (alpha_heuristic_frame_unwind_cache): Likewise.
* arc-tdep.c (arc_print_frame_cache, arc_make_frame_cache): Likewise.
* arm-tdep.c (arm_make_prologue_cache, arm_exidx_fill_cache)
(arm_make_epilogue_frame_cache): Likewise.
* avr-tdep.c (avr_frame_unwind_cache)
(avr_frame_prev_register): Likewise.
* cris-tdep.c (cris_scan_prologue): Likewise.
* csky-tdep.c (csky_frame_unwind_cache): Likewise.
* frv-tdep.c (frv_analyze_prologue): Likewise.
* hppa-tdep.c (hppa_frame_cache, hppa_fallback_frame_cache): Likewise.
* lm32-tdep.c (lm32_frame_cache): Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
* mips-tdep.c (set_reg_offset, mips_insn16_frame_cache)
(mips_micro_frame_cache, mips_insn32_frame_cache): Likewise.
(reset_saved_regs): Adjust to set realreg.
* riscv-tdep.c (riscv_scan_prologue, riscv_frame_cache): Adjust to
call member functions.
* rs6000-tdep.c (rs6000_frame_cache, rs6000_epilogue_frame_cache)
* s390-tdep.c (s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache): Likewise.
* score-tdep.c (score7_analyze_prologue)
(score3_analyze_prologue, score_make_prologue_cache): Likewise.
* sparc-netbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
* sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise.
* sparc64-netbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
* sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise.
* tilegx-tdep.c (tilegx_analyze_prologue)
(tilegx_frame_cache): Likewise.
* v850-tdep.c (v850_frame_cache): Likewise.
* vax-tdep.c (vax_frame_cache): Likewise.
|
|
The following patch drops the overloading going on with the trad_frame_saved_reg
struct and defines a new struct with a KIND enum and a union of different
fields.
The new struct looks like this:
struct trad_frame_saved_reg
{
setters/getters
...
private:
trad_frame_saved_reg_kind m_kind;
union {
LONGEST value;
int realreg;
LONGEST addr;
const gdb_byte *value_bytes;
} m_reg;
};
And the enums look like this:
/* Describes the kind of encoding a stored register has. */
enum class trad_frame_saved_reg_kind
{
/* Register value is unknown. */
UNKNOWN = 0,
/* Register value is a constant. */
VALUE,
/* Register value is in another register. */
REALREG,
/* Register value is at an address. */
ADDR,
/* Register value is a sequence of bytes. */
VALUE_BYTES
};
The patch also adds setters/getters and updates all the users of the old
struct.
It is worth mentioning that due to the previous overloaded nature of the
fields, some tdep files like to store negative offsets and indexes in the ADDR
field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may
be better supported by a new enum entry.
I have not addressed those cases in this patch to prevent unwanted breakage,
given I have no way to test some of the targets. But it would be nice to
clean those up eventually.
The change to frame-unwind.* is to constify the parameter being passed to the
unwinding functions, given we now accept a "const gdb_byte *" for value bytes.
Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with
--enable-targets=all.
gdb/ChangeLog:
2021-01-04 Luis Machado <luis.machado@linaro.org>
Update all users of trad_frame_saved_reg to use the new member
functions.
Remote all struct keywords from declarations of trad_frame_saved_reg
types, except on forward declarations.
* aarch64-tdep.c: Update.
* alpha-mdebug-tdep.c: Update.
* alpha-tdep.c: Update.
* arc-tdep.c: Update.
* arm-tdep.c: Update.
* avr-tdep.c: Update.
* cris-tdep.c: Update.
* csky-tdep.c: Update.
* frv-tdep.c: Update.
* hppa-linux-tdep.c: Update.
* hppa-tdep.c: Update.
* hppa-tdep.h: Update.
* lm32-tdep.c: Update.
* m32r-linux-tdep.c: Update.
* m32r-tdep.c: Update.
* m68hc11-tdep.c: Update.
* mips-tdep.c: Update.
* moxie-tdep.c: Update.
* riscv-tdep.c: Update.
* rs6000-tdep.c: Update.
* s390-linux-tdep.c: Update.
* s390-tdep.c: Update.
* score-tdep.c: Update.
* sparc-netbsd-tdep.c: Update.
* sparc-sol2-tdep.c: Update.
* sparc64-fbsd-tdep.c: Update.
* sparc64-netbsd-tdep.c: Update.
* sparc64-obsd-tdep.c: Update.
* sparc64-sol2-tdep.c: Update.
* tilegx-tdep.c: Update.
* v850-tdep.c: Update.
* vax-tdep.c: Update.
* frame-unwind.c (frame_unwind_got_bytes): Make parameter const.
* frame-unwind.h (frame_unwind_got_bytes): Likewise.
* trad-frame.c: Update.
Remove TF_REG_* enum.
(trad_frame_alloc_saved_regs): Add a static assertion to check for
a trivially-constructible struct.
(trad_frame_reset_saved_regs): Adjust to use member function.
(trad_frame_value_p): Likewise.
(trad_frame_addr_p): Likewise.
(trad_frame_realreg_p): Likewise.
(trad_frame_value_bytes_p): Likewise.
(trad_frame_set_value): Likewise.
(trad_frame_set_realreg): Likewise.
(trad_frame_set_addr): Likewise.
(trad_frame_set_unknown): Likewise.
(trad_frame_set_value_bytes): Likewise.
(trad_frame_get_prev_register): Likewise.
* trad-frame.h: Update.
(trad_frame_saved_reg_kind): New enum.
(struct trad_frame_saved_reg) <addr, realreg, data>: Remove.
<m_kind, m_reg>: New member fields.
<set_value, set_realreg, set_addr, set_unknown, set_value_bytes>
<kind, value, realreg, addr, value_bytes, is_value, is_realreg>
<is_addr, is_unknown, is_value_bytes>: New member functions.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
displaced steps
Today, GDB only allows a single displaced stepping operation to happen
per inferior at a time. There is a single displaced stepping buffer per
inferior, whose address is fixed (obtained with
gdbarch_displaced_step_location), managed by infrun.c.
In the case of the AMD ROCm target [1] (in the context of which this
work has been done), it is typical to have thousands of threads (or
waves, in SMT terminology) executing the same code, hitting the same
breakpoint (possibly conditional) and needing to to displaced step it at
the same time. The limitation of only one displaced step executing at a
any given time becomes a real bottleneck.
To fix this bottleneck, we want to make it possible for threads of a
same inferior to execute multiple displaced steps in parallel. This
patch builds the foundation for that.
In essence, this patch moves the task of preparing a displaced step and
cleaning up after to gdbarch functions. This allows using different
schemes for allocating and managing displaced stepping buffers for
different platforms. The gdbarch decides how to assign a buffer to a
thread that needs to execute a displaced step.
On the ROCm target, we are able to allocate one displaced stepping
buffer per thread, so a thread will never have to wait to execute a
displaced step.
On Linux, the entry point of the executable if used as the displaced
stepping buffer, since we assume that this code won't get used after
startup. From what I saw (I checked with a binary generated against
glibc and musl), on AMD64 we have enough space there to fit two
displaced stepping buffers. A subsequent patch makes AMD64/Linux use
two buffers.
In addition to having multiple displaced stepping buffers, there is also
the idea of sharing displaced stepping buffers between threads. Two
threads doing displaced steps for the same PC could use the same buffer
at the same time. Two threads stepping over the same instruction (same
opcode) at two different PCs may also be able to share a displaced
stepping buffer. This is an idea for future patches, but the
architecture built by this patch is made to allow this.
Now, the implementation details. The main part of this patch is moving
the responsibility of preparing and finishing a displaced step to the
gdbarch. Before this patch, preparing a displaced step is driven by the
displaced_step_prepare_throw function. It does some calls to the
gdbarch to do some low-level operations, but the high-level logic is
there. The steps are roughly:
- Ask the gdbarch for the displaced step buffer location
- Save the existing bytes in the displaced step buffer
- Ask the gdbarch to copy the instruction into the displaced step buffer
- Set the pc of the thread to the beginning of the displaced step buffer
Similarly, the "fixup" phase, executed after the instruction was
successfully single-stepped, is driven by the infrun code (function
displaced_step_finish). The steps are roughly:
- Restore the original bytes in the displaced stepping buffer
- Ask the gdbarch to fixup the instruction result (adjust the target's
registers or memory to do as if the instruction had been executed in
its original location)
The displaced_step_inferior_state::step_thread field indicates which
thread (if any) is currently using the displaced stepping buffer, so it
is used by displaced_step_prepare_throw to check if the displaced
stepping buffer is free to use or not.
This patch defers the whole task of preparing and cleaning up after a
displaced step to the gdbarch. Two new main gdbarch methods are added,
with the following semantics:
- gdbarch_displaced_step_prepare: Prepare for the given thread to
execute a displaced step of the instruction located at its current PC.
Upon return, everything should be ready for GDB to resume the thread
(with either a single step or continue, as indicated by
gdbarch_displaced_step_hw_singlestep) to make it displaced step the
instruction.
- gdbarch_displaced_step_finish: Called when the thread stopped after
having started a displaced step. Verify if the instruction was
executed, if so apply any fixup required to compensate for the fact
that the instruction was executed at a different place than its
original pc. Release any resources that were allocated for this
displaced step. Upon return, everything should be ready for GDB to
resume the thread in its "normal" code path.
The displaced_step_prepare_throw function now pretty much just offloads
to gdbarch_displaced_step_prepare and the displaced_step_finish function
offloads to gdbarch_displaced_step_finish.
The gdbarch_displaced_step_location method is now unnecessary, so is
removed. Indeed, the core of GDB doesn't know how many displaced step
buffers there are nor where they are.
To keep the existing behavior for existing architectures, the logic that
was previously implemented in infrun.c for preparing and finishing a
displaced step is moved to displaced-stepping.c, to the
displaced_step_buffer class. Architectures are modified to implement
the new gdbarch methods using this class. The behavior is not expected
to change.
The other important change (which arises from the above) is that the
core of GDB no longer prevents concurrent displaced steps. Before this
patch, start_step_over walks the global step over chain and tries to
initiate a step over (whether it is in-line or displaced). It follows
these rules:
- if an in-line step is in progress (in any inferior), don't start any
other step over
- if a displaced step is in progress for an inferior, don't start
another displaced step for that inferior
After starting a displaced step for a given inferior, it won't start
another displaced step for that inferior.
In the new code, start_step_over simply tries to initiate step overs for
all the threads in the list. But because threads may be added back to
the global list as it iterates the global list, trying to initiate step
overs, start_step_over now starts by stealing the global queue into a
local queue and iterates on the local queue. In the typical case, each
thread will either:
- have initiated a displaced step and be resumed
- have been added back by the global step over queue by
displaced_step_prepare_throw, because the gdbarch will have returned
that there aren't enough resources (i.e. buffers) to initiate a
displaced step for that thread
Lastly, if start_step_over initiates an in-line step, it stops
iterating, and moves back whatever remaining threads it had in its local
step over queue to the global step over queue.
Two other gdbarch methods are added, to handle some slightly annoying
corner cases. They feel awkwardly specific to these cases, but I don't
see any way around them:
- gdbarch_displaced_step_copy_insn_closure_by_addr: in
arm_pc_is_thumb, arm-tdep.c wants to get the closure for a given
buffer address.
- gdbarch_displaced_step_restore_all_in_ptid: when a process forks
(at least on Linux), the address space is copied. If some displaced
step buffers were in use at the time of the fork, we need to restore
the original bytes in the child's address space.
These two adjustments are also made in infrun.c:
- prepare_for_detach: there may be multiple threads doing displaced
steps when we detach, so wait until all of them are done
- handle_inferior_event: when we handle a fork event for a given
thread, it's possible that other threads are doing a displaced step at
the same time. Make sure to restore the displaced step buffer
contents in the child for them.
[1] https://github.com/ROCm-Developer-Tools/ROCgdb
gdb/ChangeLog:
* displaced-stepping.h (struct
displaced_step_copy_insn_closure): Adjust comments.
(struct displaced_step_inferior_state) <step_thread,
step_gdbarch, step_closure, step_original, step_copy,
step_saved_copy>: Remove fields.
(struct displaced_step_thread_state): New.
(struct displaced_step_buffer): New.
* displaced-stepping.c (displaced_step_buffer::prepare): New.
(write_memory_ptid): Move from infrun.c.
(displaced_step_instruction_executed_successfully): New,
factored out of displaced_step_finish.
(displaced_step_buffer::finish): New.
(displaced_step_buffer::copy_insn_closure_by_addr): New.
(displaced_step_buffer::restore_in_ptid): New.
* gdbarch.sh (displaced_step_location): Remove.
(displaced_step_prepare, displaced_step_finish,
displaced_step_copy_insn_closure_by_addr,
displaced_step_restore_all_in_ptid): New.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* gdbthread.h (class thread_info) <displaced_step_state>: New
field.
(thread_step_over_chain_remove): New declaration.
(thread_step_over_chain_next): New declaration.
(thread_step_over_chain_length): New declaration.
* thread.c (thread_step_over_chain_remove): Make non-static.
(thread_step_over_chain_next): New.
(global_thread_step_over_chain_next): Use
thread_step_over_chain_next.
(thread_step_over_chain_length): New.
(global_thread_step_over_chain_enqueue): Add debug print.
(global_thread_step_over_chain_remove): Add debug print.
* infrun.h (get_displaced_step_copy_insn_closure_by_addr):
Remove.
* infrun.c (get_displaced_stepping_state): New.
(displaced_step_in_progress_any_inferior): Remove.
(displaced_step_in_progress_thread): Adjust.
(displaced_step_in_progress): Adjust.
(displaced_step_in_progress_any_thread): New.
(get_displaced_step_copy_insn_closure_by_addr): Remove.
(gdbarch_supports_displaced_stepping): Use
gdbarch_displaced_step_prepare_p.
(displaced_step_reset): Change parameter from inferior to
thread.
(displaced_step_prepare_throw): Implement using
gdbarch_displaced_step_prepare.
(write_memory_ptid): Move to displaced-step.c.
(displaced_step_restore): Remove.
(displaced_step_finish): Implement using
gdbarch_displaced_step_finish.
(start_step_over): Allow starting more than one displaced step.
(prepare_for_detach): Handle possibly multiple threads doing
displaced steps.
(handle_inferior_event): Handle possibility that fork event
happens while another thread displaced steps.
* linux-tdep.h (linux_displaced_step_prepare): New.
(linux_displaced_step_finish): New.
(linux_displaced_step_copy_insn_closure_by_addr): New.
(linux_displaced_step_restore_all_in_ptid): New.
(linux_init_abi): Add supports_displaced_step parameter.
* linux-tdep.c (struct linux_info) <disp_step_buf>: New field.
(linux_displaced_step_prepare): New.
(linux_displaced_step_finish): New.
(linux_displaced_step_copy_insn_closure_by_addr): New.
(linux_displaced_step_restore_all_in_ptid): New.
(linux_init_abi): Add supports_displaced_step parameter,
register displaced step methods if true.
(_initialize_linux_tdep): Register inferior_execd observer.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
supports_displaced_step parameter, adjust call to
linux_init_abi. Remove call to
set_gdbarch_displaced_step_location.
(amd64_linux_init_abi): Adjust call to
amd64_linux_init_abi_common.
(amd64_x32_linux_init_abi): Likewise.
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Adjust call to
linux_init_abi. Remove call to
set_gdbarch_displaced_step_location.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* alpha-linux-tdep.c (alpha_linux_init_abi): Adjust call to
linux_init_abi.
* arc-linux-tdep.c (arc_linux_init_osabi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* cris-linux-tdep.c (cris_linux_init_abi): Likewise.
* csky-linux-tdep.c (csky_linux_init_abi): Likewise.
* frv-linux-tdep.c (frv_linux_init_abi): Likewise.
* hppa-linux-tdep.c (hppa_linux_init_abi): Likewise.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
* m68k-linux-tdep.c (m68k_linux_init_abi): Likewise.
* microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mn10300-linux-tdep.c (am33_linux_init_osabi): Likewise.
* nios2-linux-tdep.c (nios2_linux_init_abi): Likewise.
* or1k-linux-tdep.c (or1k_linux_init_abi): Likewise.
* riscv-linux-tdep.c (riscv_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_linux_init_abi_any): Likewise.
* sh-linux-tdep.c (sh_linux_init_abi): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* tic6x-linux-tdep.c (tic6x_uclinux_init_abi): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
* xtensa-linux-tdep.c (xtensa_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Adjust call to
linux_init_abi. Remove call to
set_gdbarch_displaced_step_location.
* arm-tdep.c (arm_pc_is_thumb): Call
gdbarch_displaced_step_copy_insn_closure_by_addr instead of
get_displaced_step_copy_insn_closure_by_addr.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Adjust calls to
clear gdbarch methods.
* rs6000-tdep.c (struct ppc_inferior_data): New structure.
(get_ppc_per_inferior): New function.
(ppc_displaced_step_prepare): New function.
(ppc_displaced_step_finish): New function.
(ppc_displaced_step_restore_all_in_ptid): New function.
(rs6000_gdbarch_init): Register new gdbarch methods.
* s390-tdep.c (s390_gdbarch_init): Don't call
set_gdbarch_displaced_step_location, set new gdbarch methods.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-disp-step-avx.exp: Adjust pattern.
* gdb.threads/forking-threads-plus-breakpoint.exp: Likewise.
* gdb.threads/non-stop-fair-events.exp: Likewise.
Change-Id: I387cd235a442d0620ec43608fd3dc0097fcbf8c8
|
|
Since we're going to introduce other "displaced step" functions and
another kind of displaced step closure, make it clear that this is the
return type of the gdbarch_displaced_step_copy_insn function.
gdb/ChangeLog:
* infrun.h (get_displaced_step_closure_by_addr): Rename to...
(get_displaced_step_copy_insn_closure_by_addr): ... this.
Update all users.
(displaced_step_closure): Rename to...
(displaced_step_copy_insn_closure): ... this. Update all users.
(displaced_step_closure_up): Rename to...
(displaced_step_copy_insn_closure_up). ... this. Update all
users.
(buf_displaced_step_closure): Rename to...
(buf_displaced_step_copy_insn_closure): ... this. Update all
users.
* infrun.c (get_displaced_step_closure_by_addr): Rename to...
(get_displaced_step_copy_insn_closure_by_addr): ... this.
Update all users.
* aarch64-tdep.c (aarch64_displaced_step_closure): Rename to...
(aarch64_displaced_step_copy_insn_closure): ... this. Update
all users.
* amd64-tdep.c (amd64_displaced_step_closure): Rename to...
(amd64_displaced_step_copy_insn_closure): ... this. Update all
users.
* arm-tdep.h (arm_displaced_step_closure): Rename to...
(arm_displaced_step_copy_insn_closure): ... this. Update all
users.
* i386-tdep.h (i386_displaced_step_closure): Rename to...
(i386_displaced_step_copy_insn_closure): ... this. Update all
users.
* rs6000-tdep.c (ppc_displaced_step_closure): Rename to...
(ppc_displaced_step_copy_insn_closure): ... this. Update all
users.
* s390-tdep.c (s390_displaced_step_closure): Rename to...
(s390_displaced_step_copy_insn_closure): ... this. Update all
users.
* gdbarch.h: Re-generate.
* gdbarch.c: Re-generate.
Change-Id: I11f56dbcd4c3532fb195a08ba93bccf1d12a03c8
|
|
The "store on condition" instructions STOC, STOCG, and STOCFH are recorded
as if their instruction formats resembled that of STG. This is wrong,
usually resulting in "failed to record execution log" errors when trying
to record code with any of these instructions.
This patch fixes the recording of these instructions.
gdb/ChangeLog:
PR tdep/26916
* s390-tdep.c (s390_process_record): Fix recording of STOC, STOCG,
and STOCFH.
|
|
Move all debug prints of the "displaced" category to use a new
displaced_debug_printf macro, like what was done for infrun and others
earlier.
The debug output for one displaced step one amd64 looks like:
[displaced] displaced_step_prepare_throw: stepping process 3367044 now
[displaced] displaced_step_prepare_throw: saved 0x555555555042: 1e fa 31 ed 49 89 d1 5e 48 89 e2 48 83 e4 f0 50
[displaced] amd64_displaced_step_copy_insn: copy 0x555555555131->0x555555555042: b8 00 00 00 00 5d c3 0f 1f 84 00 00 00 00 00 f3
[displaced] displaced_step_prepare_throw: displaced pc to 0x555555555042
[displaced] resume_1: run 0x555555555042: b8 00 00 00
[displaced] displaced_step_restore: restored process 3367044 0x555555555042
[displaced] amd64_displaced_step_fixup: fixup (0x555555555131, 0x555555555042), insn = 0xb8 0x00 ...
[displaced] amd64_displaced_step_fixup: relocated %rip from 0x555555555047 to 0x555555555136
On test case needed to be updated because it relied on the specific
formatting of the message.
gdb/ChangeLog:
* infrun.h (displaced_debug_printf): New macro. Replace
displaced debug prints throughout to use it.
(displaced_debug_printf_1): New declaration.
(displaced_step_dump_bytes): Return string, remove ui_file
parameter, update all callers.
* infrun.c (displaced_debug_printf_1): New function.
(displaced_step_dump_bytes): Return string, remove ui_file
parameter
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-disp-step-avx.exp: Update displaced step debug
expected output.
Change-Id: Ie78837f56431f6f98378790ba1e6051337bf6533
|
|
I noticed that the closure parameter of
gdbarch_displaced_step_hw_singlestep is never used by any
implementation of the method, so this patch removes it.
gdb/ChangeLog:
* gdbarch.sh (displaced_step_hw_singlestep): Remove closure
parameter.
* aarch64-tdep.c (aarch64_displaced_step_hw_singlestep):
Likewise.
* aarch64-tdep.h (aarch64_displaced_step_hw_singlestep):
Likewise.
* arch-utils.c (default_displaced_step_hw_singlestep):
Likewise.
* arch-utils.h (default_displaced_step_hw_singlestep):
Likewise.
* rs6000-tdep.c (ppc_displaced_step_hw_singlestep):
Likewise.
* s390-tdep.c (s390_displaced_step_hw_singlestep):
Likewise.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* infrun.c (resume_1): Adjust.
Change-Id: I7354f0b22afc2692ebff0cd700a462db8f389fc1
|
|
Replace the int-used-as-a-bool with a bool.
gdb/ChangeLog:
* gdbarch.sh (displaced_step_hw_singlestep): Return bool.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* aarch64-tdep.c (aarch64_displaced_step_hw_singlestep): Return
bool.
* aarch64-tdep.h (aarch64_displaced_step_hw_singlestep):
Likewise.
* arch-utils.h (default_displaced_step_hw_singlestep): Likewise.
* arch-utils.c (default_displaced_step_hw_singlestep): Likewise.
* rs6000-tdep.c (ppc_displaced_step_hw_singlestep): Likewise.
* s390-tdep.c (s390_displaced_step_hw_singlestep): Likewise.
Change-Id: I76a78366dc5c0afb03f8f4bddf9f4e8d68fe3114
|
|
While working on something else, I noticed that tdesc_data_cleanup
took a void* parameter. Looking more into this, I found that
tdesc_use_registers expected a transfer of ownership.
I think it's better to express this sort of thing via the type system,
when possible. This patch changes tdesc_data_alloc to return a unique
pointer, changes tdesc_use_registers to accept an rvalue reference,
and then adapts all the users.
Note that a deleter structure is introduced to avoid having to move
tdesc_arch_data to the header file.
2020-09-17 Tom Tromey <tromey@adacore.com>
* tic6x-tdep.c (tic6x_gdbarch_init): Update.
* target-descriptions.h (struct tdesc_arch_data_deleter): New.
(tdesc_arch_data_up): New typedef.
(tdesc_use_registers, tdesc_data_alloc): Update.
(tdesc_data_cleanup): Don't declare.
* target-descriptions.c (tdesc_data_alloc): Return a
tdesc_arch_data_up.
(tdesc_arch_data_deleter::operator()): Rename from
tdesc_data_cleanup. Change argument type.
(tdesc_use_registers): Change early_data to an rvalue reference.
(tdesc_use_registers): Don't use delete.
* sparc-tdep.c (sparc32_gdbarch_init): Update.
* s390-tdep.c (s390_gdbarch_init): Update.
* rx-tdep.c (rx_gdbarch_init): Update.
* rs6000-tdep.c (rs6000_gdbarch_init): Update.
* riscv-tdep.c (riscv_gdbarch_init): Update.
* or1k-tdep.c (or1k_gdbarch_init): Update.
* nios2-tdep.c (nios2_gdbarch_init): Update.
* nds32-tdep.c (nds32_gdbarch_init): Update.
* mips-tdep.c (mips_gdbarch_init): Update.
* microblaze-tdep.c (microblaze_gdbarch_init): Update.
* m68k-tdep.c (m68k_gdbarch_init): Update.
* i386-tdep.c (i386_gdbarch_init): Update.
* arm-tdep.c (arm_gdbarch_init): Update.
* arc-tdep.c (arc_tdesc_init): Update.
(arc_gdbarch_init): Update.
* aarch64-tdep.c (aarch64_gdbarch_init): Update.
|
|
A later patch in this series will rewrite enum_flags fixing some API
holes. That would cause build failures around code using
type_instance_flags. Or rather, that should be using it, but wasn't.
This patch fixes it by using type_instance_flags throughout instead of
plain integers.
Note that we can't make the seemingly obvious change to struct
type::instance_flags:
- unsigned instance_flags : 9;
+ ENUM_BITFIELD (type_instance_flag_value) instance_flags : 9;
Because G++ complains then that 9 bits isn't sufficient for holding
all values of type_instance_flag_value.
So the patch adds an type::instance_flags() method, which takes care
of casting appropriately, and adds a separate type::set_instance_flags
method, following the pattern of the ongoing TYPE_XXX macro
elimination. This converts uses of TYPE_INSTANCE_FLAGS to
type::instance_flags() in the places where the code was already being
touched, but there are still many references to the
TYPE_INSTANCE_FLAGS macro left behind. Those could/should be fully
replaced at some point.
gdb/ChangeLog:
* avr-tdep.c (avr_address_class_type_flags): Return
type_instance_flags.
(avr_address_class_type_flags_to_name): Take a
type_instance_flags.
(avr_address_class_name_to_type_flags): Return bool and take a
type_instance_flags.
* d-lang.c (build_d_types): Use type::set_instance_flags.
* ft32-tdep.c (ft32_address_class_type_flags): Return
type_instance_flags.
(ft32_address_class_type_flags_to_name): Take a
type_instance_flags.
(ft32_address_class_name_to_type_flags): Return bool and take a
type_instance_flags.
(ft32_gdbarch_init): Use type::set_instance_flags.
* eval.c (fake_method::fake_method): Use type::set_instance_flags.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (address_class_type_flags): Use type_instance_flags.
(address_class_name_to_type_flags): Use type_instance_flags and
bool.
* gdbtypes.c (address_space_name_to_int)
(address_space_int_to_name, make_qualified_type): Use
type_instance_flags.
(make_qualified_type): Use type_instance_flags and
type::set_instance_flags.
(make_type_with_address_space, make_cv_type, make_vector_type)
(check_typedef): Use type_instance_flags.
(recursive_dump_type): Cast type_instance_flags to unsigned for
printing.
(copy_type_recursive): Use type::set_instance_flags.
(gdbtypes_post_init): Use type::set_instance_flags.
* gdbtypes.h (struct type) <instance_flags>: Rename to ...
<m_instance_flags>: ... this.
<instance_flags, set_instance_flags>: New methods.
(TYPE_INSTANCE_FLAGS): Use the instance_flags method.
(SET_TYPE_INSTANCE_FLAGS): New.
(address_space_name_to_int, address_space_int_to_name)
(make_type_with_address_space): Pass flags using
type_instance_flags instead of int.
* stabsread.c (cleanup_undefined_types_noname): Use
type::set_instance_flags.
* s390-tdep.c (s390_address_class_type_flags): Return
type_instance_flags.
(s390_address_class_type_flags_to_name): Take a
type_instance_flags.
(s390_address_class_name_to_type_flags): Return bool and take a
type_instance_flags.
* type-stack.c (type_stack::follow_types): Use
type_instance_flags.
* dwarf2/read.c (read_tag_pointer_type): Use type_instance_flags.
|
|
gdb/ChangeLog:
* gdbtypes.h (TYPE_VECTOR): Remove, replace all
uses with type::is_vector.
Change-Id: I1ac28755af44b1585c190553f9961288c8fb9137
|
|
gdb/ChangeLog:
* gdbtypes.h (TYPE_VARARGS): Remove, replace all
uses with type::has_varargs.
Change-Id: Ieea4a64b4bfa4b8be643e68cb403081881133740
|
|
gdb/ChangeLog:
* gdbtypes.h (TYPE_UNSIGNED): Remove, replace all uses with
type::is_unsigned.
Change-Id: I84f76f5cd44ff7294e421d317376a9e476bc8666
|
|
When building gdb with CFLAGS/CXXFLAGS="-O2 -g -Wall", I see:
...
src/gdb/s390-tdep.c: In function 'void s390_displaced_step_fixup(gdbarch*, \
displaced_step_closure*, CORE_ADDR, CORE_ADDR, regcache*)':
src/gdb/s390-tdep.c:528:30: warning: 'r2' may be used uninitialized in this \
function [-Wmaybe-uninitialized]
528 | if (insn[0] == op_basr && r2 == 0)
| ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~
...
The problem is that the compiler is unaware that
'is_rr (insn, op_basr, &r1, &r2) == 1' ensures that 'insn[0] == op_basr':
...
if (is_rr (insn, op_basr, &r1, &r2)
|| is_rx (insn, op_bas, &r1, &d2, &x2, &b2))
{
/* Recompute saved return address in R1. */
regcache_cooked_write_unsigned (regs, S390_R0_REGNUM + r1,
amode | (from + insnlen));
/* Update PC iff the instruction doesn't actually branch. */
if (insn[0] == op_basr && r2 == 0)
regcache_write_pc (regs, from + insnlen);
}
...
Fix this by storing the result of the call, and using it instead of
'insn[0] ==op_basr'.
Build on x86_64-linux with --enable-targets=s390-suse-linux,s390x-suse-linux.
gdb/ChangeLog:
2020-07-29 Tom de Vries <tdevries@suse.de>
PR tdep/26280
* s390-tdep.c (s390_displaced_step_fixup): Fix Wmaybe-uninitialized.
|
|
Remove the `FIELD_TYPE` macro, changing all the call sites to use
`field::type` directly.
gdb/ChangeLog:
* gdbtypes.h (FIELD_TYPE): Remove. Change all call sites
to use field::type instead.
Change-Id: I7673fedaa276e485189c87991a9043495da22ef5
|
|
Replace all uses of it by type::field.
Note that since type::field returns a reference to the field, some spots
are used to assign the whole field structure. See ctfread.c, function
attach_fields_to_type, for example. This is the same as was happening
with the macro, so I don't think it's a problem, but if anybody sees a
really nicer way to do this, now could be a good time to implement it.
gdb/ChangeLog:
* gdbtypes.h (TYPE_FIELD): Remove. Replace all uses with
type::field.
|
|
Remove `TYPE_NFIELDS`, changing all the call sites to use
`type::num_fields` directly. This is quite a big diff, but this was
mostly done using sed and coccinelle. A few call sites were done by
hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_NFIELDS): Remove. Change all cal sites to use
type::num_fields instead.
Change-Id: Ib73be4c36f9e770e0f729bac3b5257d7cb2f9591
|
|
Remove TYPE_CODE, changing all the call sites to use type::code
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use
type::code instead.
|
|
Use an explicit conversion from unique_ptr<T> to
displaced_step_closure_up to avoid a compiler bug
with gcc-4.8.4:
../../binutils-gdb/gdb/amd64-tdep.c:1514:10: error: cannot bind
'std::unique_ptr<amd64_displaced_step_closure>' lvalue to
'std::unique_ptr<amd64_displaced_step_closure>&&'
gdb:
2020-02-18 Bernd Edlinger <bernd.edlinger@hotmail.de>
* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Use an explicit
conversion.
* amd64-tdep.c (amd64_displaced_step_copy_insn): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise.
* s390-tdep.c (s390_displaced_step_copy_insn): Likewise.
|
|
To help with readability, add the type displaced_step_closure_up, an
alias for std::unique_ptr<displaced_step_closure>, and use it throughout
the code base.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Use
displaced_step_closure_up.
* aarch64-tdep.h (aarch64_displaced_step_copy_insn): Likewise.
(struct displaced_step_closure_up):
* amd64-tdep.c (amd64_displaced_step_copy_insn): Likewise.
* amd64-tdep.h (amd64_displaced_step_copy_insn): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn):
Likewise.
* gdbarch.sh (displaced_step_copy_insn): Likewise.
* gdbarch.c, gdbarch.h: Re-generate.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Use
displaced_step_closure_up.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
* i386-tdep.h (i386_displaced_step_copy_insn): Likewise.
* infrun.h (displaced_step_closure_up): New type alias.
(struct displaced_step_inferior_state) <step_closure>: Change
type to displaced_step_closure_up.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Use
displaced_step_closure_up.
* s390-tdep.c (s390_displaced_step_copy_insn): Likewise.
|
|
This callback dynamically allocates a specialized displaced_step_closure, and
gives the ownership of the object to its caller. So I think it would make
sense for the callback to return an std::unique_ptr, this is what this patch
implements.
gdb/ChangeLog:
* gdbarch.sh (displaced_step_copy_insn): Change return type to an
std::unique_ptr.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* infrun.c (displaced_step_prepare_throw): Adjust to std::unique_ptr
change.
* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Change return
type to std::unique_ptr.
* aarch64-tdep.h (aarch64_displaced_step_copy_insn): Likewise.
* amd64-tdep.c (amd64_displaced_step_copy_insn): Likewise.
* amd64-tdep.h (amd64_displaced_step_copy_insn): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Likewise.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
* i386-tdep.h (i386_displaced_step_copy_insn): Likewise.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise.
* s390-tdep.c (s390_displaced_step_copy_insn): Likewise.
|
|
This moves all the remaining DWARF code to the new dwarf2
subdirectory. This is just a simple renaming, with updates to
includes as needed.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/expr.c: Rename from dwarf2expr.c.
* dwarf2/expr.h: Rename from dwarf2expr.h.
* dwarf2/frame-tailcall.c: Rename from dwarf2-frame-tailcall.c.
* dwarf2/frame-tailcall.h: Rename from dwarf2-frame-tailcall.h.
* dwarf2/frame.c: Rename from dwarf2-frame.c.
* dwarf2/frame.h: Rename from dwarf2-frame.h.
* dwarf2/index-cache.c: Rename from dwarf-index-cache.c.
* dwarf2/index-cache.h: Rename from dwarf-index-cache.h.
* dwarf2/index-common.c: Rename from dwarf-index-common.c.
* dwarf2/index-common.h: Rename from dwarf-index-common.h.
* dwarf2/index-write.c: Rename from dwarf-index-write.c.
* dwarf2/index-write.h: Rename from dwarf-index-write.h.
* dwarf2/loc.c: Rename from dwarf2loc.c.
* dwarf2/loc.h: Rename from dwarf2loc.h.
* dwarf2/read.c: Rename from dwarf2read.c.
* dwarf2/read.h: Rename from dwarf2read.h.
* dwarf2/abbrev.c, aarch64-tdep.c, alpha-tdep.c,
amd64-darwin-tdep.c, arc-tdep.c, arm-tdep.c, bfin-tdep.c,
compile/compile-c-symbols.c, compile/compile-cplus-symbols.c,
compile/compile-loc2c.c, cris-tdep.c, csky-tdep.c, findvar.c,
gdbtypes.c, guile/scm-type.c, h8300-tdep.c, hppa-bsd-tdep.c,
hppa-linux-tdep.c, i386-darwin-tdep.c, i386-linux-tdep.c,
i386-tdep.c, iq2000-tdep.c, m32c-tdep.c, m68hc11-tdep.c,
m68k-tdep.c, microblaze-tdep.c, mips-tdep.c, mn10300-tdep.c,
msp430-tdep.c, nds32-tdep.c, nios2-tdep.c, or1k-tdep.c,
riscv-tdep.c, rl78-tdep.c, rs6000-tdep.c, rx-tdep.c, s12z-tdep.c,
s390-tdep.c, score-tdep.c, sh-tdep.c, sparc-linux-tdep.c,
sparc-tdep.c, sparc64-linux-tdep.c, sparc64-tdep.c, tic6x-tdep.c,
tilegx-tdep.c, v850-tdep.c, xstormy16-tdep.c, xtensa-tdep.c:
Update.
* Makefile.in (COMMON_SFILES): Update.
(HFILES_NO_SRCDIR): Update.
Change-Id: Ied9ce1436cd27ac4a4cffef10ec92e396f181928
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-17 Tom de Vries <tdevries@suse.de>
* arm-nbsd-nat.c: Fix typos in comments.
* arm-tdep.c: Same.
* darwin-nat-info.c: Same.
* dwarf2read.c: Same.
* elfread.c: Same.
* event-top.c: Same.
* findvar.c: Same.
* gdbtypes.c: Same.
* hppa-tdep.c: Same.
* i386-tdep.c: Same.
* jit.c: Same.
* main.c: Same.
* mdebugread.c: Same.
* moxie-tdep.c: Same.
* nto-procfs.c: Same.
* osabi.c: Same.
* ppc-linux-tdep.c: Same.
* remote.c: Same.
* riscv-tdep.c: Same.
* s390-tdep.c: Same.
* sh-tdep.c: Same.
* sparc-linux-tdep.c: Same.
* sparc-nat.c: Same.
* stack.c: Same.
* target-descriptions.c: Same.
* top.c: Same.
* varobj.c: Same.
Change-Id: I6047967abd2d51c9000dea15184d19f4e952c3ff
|
|
This patch was inspired by a recent review that recommended using
std::string in a new implementation of the gcc_target_options gdbarch
function. It changes this function to return std::string rather than
an ordinary xmalloc'd string.
I believe this caught a latent memory leak in compile.c:get_args.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-10-15 Tom Tromey <tromey@adacore.com>
* gdbarch.h, gdbarch.c: Rebuild.
* gdbarch.sh (gcc_target_options): Change return type to
std::string.
* compile/compile.c (get_args): Update.
* nios2-tdep.c (nios2_gcc_target_options): Return std::string.
* arm-linux-tdep.c (arm_linux_gcc_target_options): Return
std::string.
* aarch64-linux-tdep.c (aarch64_linux_gcc_target_options): Return
std::string.
* arch-utils.c (default_gcc_target_options): Return std::string.
* arch-utils.h (default_gcc_target_options): Return std::string.
* s390-tdep.c (s390_gcc_target_options): Return std::string.
Change-Id: I51f61703426a323089e646da8f22320a2cafbc1f
|
|
The infcall-nested-structs test case yields 36 FAILs on s390x because GCC
and GDB disagree on how to pass a C++ struct like this as an argument to a
function:
struct s { float x; static float y; };
For the purpose of argument passing, GCC ignores static fields, while GDB
does not. Thus GCC passes the argument in a floating-point register and
GDB passes it via memory.
Fix this by explicitly ignoring static fields when detecting single-field
structs.
gdb/ChangeLog:
* s390-tdep.c (s390_effective_inner_type): Ignore static fields
when unwrapping single-field structs.
|
|
Enable recording most of the new "arch13" instructions on z/Architecture
targets, except for the specialized-function-assist instructions:
SORTL - sort lists
DFLTCC - deflate conversion call
KDSA - compute digital signature authentication
gdb/ChangeLog:
* s390-tdep.c (390_process_record): Handle new arch13 instructions
except SORTL, DFLTCC, and KDSA.
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
The align.exp test case yields many FAILs on s390x, since GDB's _Alignoff
doesn't always agree with the compiler's. On s390x, the maximum alignment
is 8, but GDB returns an alignment of 16 for 16-byte data types such as
"long double".
This is fixed by implementing the type_align gdbarch method. The new
method returns an alignment of 8 for all integer, floating-point, and
vector types larger than 8 bytes. With this change, all align.exp tests
pass.
gdb/ChangeLog:
* s390-tdep.c (s390_type_align): New function.
(s390_gdbarch_init): Set it as type_align gdbarch method.
|
|
This replaces throw_exception with "throw;" when possible. This was
written by script. The rule that is followed is that uses of the
form:
catch (... &name)
{
...
throw_exception (name);
}
... can be rewritten. This should always be safe, because exceptions
are caught by const reference, and therefore can't be modified in the
body of the catch.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* valops.c (value_rtti_indirect_type): Replace throw_exception
with throw.
* tracefile-tfile.c (tfile_target_open): Replace throw_exception
with throw.
* thread.c (thr_try_catch_cmd): Replace throw_exception with
throw.
* target.c (target_translate_tls_address): Replace throw_exception
with throw.
* stack.c (frame_apply_command_count): Replace throw_exception
with throw.
* solib-spu.c (append_ocl_sos): Replace throw_exception with
throw.
* s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception
with throw.
* rs6000-tdep.c (rs6000_frame_cache)
(rs6000_epilogue_frame_cache): Replace throw_exception with throw.
* remote.c: Replace throw_exception with throw.
* record-full.c (record_full_message, record_full_wait_1)
(record_full_restore): Replace throw_exception with throw.
* record-btrace.c:
(get_thread_current_frame_id, record_btrace_start_replaying)
(cmd_record_btrace_bts_start, cmd_record_btrace_pt_start)
(cmd_record_btrace_start): Replace throw_exception with throw.
* parse.c (parse_exp_in_context_1): Replace throw_exception with
throw.
* linux-nat.c (detach_one_lwp, linux_resume_one_lwp)
(resume_stopped_resumed_lwps): Replace throw_exception with throw.
* linespec.c:
(find_linespec_symbols): Replace throw_exception with throw.
* infrun.c (displaced_step_prepare, resume): Replace
throw_exception with throw.
* infcmd.c (post_create_inferior): Replace throw_exception with
throw.
* inf-loop.c (inferior_event_handler): Replace throw_exception
with throw.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Replace throw_exception with throw.
* frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle)
(get_prev_frame_always, get_frame_pc_if_available)
(get_frame_address_in_block_if_available, get_frame_language):
Replace throw_exception with throw.
* frame-unwind.c (frame_unwind_try_unwinder): Replace
throw_exception with throw.
* eval.c (fetch_subexp_value, evaluate_var_value)
(evaluate_funcall, evaluate_subexp_standard): Replace
throw_exception with throw.
* dwarf2loc.c (call_site_find_chain)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval):
Replace throw_exception with throw.
* dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception
with throw.
* darwin-nat.c (darwin_attach_pid): Replace throw_exception with
throw.
* cp-abi.c (baseclass_offset): Replace throw_exception with throw.
* completer.c (complete_line_internal): Replace throw_exception
with throw.
* compile/compile-object-run.c (compile_object_run): Replace
throw_exception with throw.
* cli/cli-script.c (process_next_line): Replace throw_exception
with throw.
* btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace)
(btrace_enable, btrace_maint_update_pt_packets): Replace
throw_exception with throw.
* breakpoint.c (create_breakpoint, save_breakpoints): Replace
throw_exception with throw.
* break-catch-throw.c (re_set_exception_catchpoint): Replace
throw_exception with throw.
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Replace throw_exception with throw.
* aarch64-tdep.c (aarch64_make_prologue_cache)
(aarch64_make_stub_cache): Replace throw_exception with throw.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_detach_one_lwp): Replace throw_exception with
throw.
(linux_resume_one_lwp): Likewise.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_push_dummy_call): Replace arg with
return_method.
* alpha-tdep.c (alpha_push_dummy_call): Likewise.
* amd64-tdep.c (amd64_push_arguments): Likewise.
(amd64_push_dummy_call): Likewise.
* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
* arc-tdep.c (arc_push_dummy_call): Likewise.
* arm-tdep.c (arm_push_dummy_call): Likewise.
* avr-tdep.c (avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_push_dummy_call): Likewise.
* csky-tdep.c (csky_push_dummy_call): Likewise.
* frv-tdep.c (frv_push_dummy_call): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (gdbarch_push_dummy_call): Replace arg with
return_method.
* h8300-tdep.c (h8300_push_dummy_call): Likewise.
* hppa-tdep.c (hppa32_push_dummy_call): Likewise.
(hppa64_push_dummy_call): Likewise.
* i386-darwin-tdep.c (i386_darwin_push_dummy_call): Likewise.
* i386-tdep.c (i386_push_dummy_call): Likewise.
* ia64-tdep.c (ia64_push_dummy_call): Likewise.
* infcall.c (call_function_by_hand_dummy): Likewise.
* iq2000-tdep.c (iq2000_push_dummy_call): Likewise.
* lm32-tdep.c (lm32_push_dummy_call): Likewise.
* m32c-tdep.c (m32c_push_dummy_call): Likewise.
* m32r-tdep.c (m32r_push_dummy_call): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call): Likewise.
* m68k-tdep.c (m68k_push_dummy_call): Likewise.
* mep-tdep.c (mep_push_dummy_call): Likewise.
* mips-tdep.c (mips_eabi_push_dummy_call): Likewise.
(mips_n32n64_push_dummy_call): Likewise.
(mips_o32_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.
* mn10300-tdep.c (mn10300_push_dummy_call): Likewise.
* msp430-tdep.c (msp430_push_dummy_call): Likewise.
* nds32-tdep.c (nds32_push_dummy_call): Likewise.
* nios2-tdep.c (nios2_push_dummy_call): Likewise.
* or1k-tdep.c (or1k_push_dummy_call): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Likewise.
(ppc64_sysv_abi_push_dummy_call): Likewise.
* ppc-tdep.h (ppc_sysv_abi_push_dummy_call): Likewise.
(ppc64_sysv_abi_push_dummy_call): Likewise.
* riscv-tdep.c (riscv_push_dummy_call): Likewise.
* rl78-tdep.c (rl78_push_dummy_call): Likewise.
* rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
* rx-tdep.c (rx_push_dummy_call): Likewise.
* s390-tdep.c (s390_push_dummy_call): Likewise.
* score-tdep.c (score_push_dummy_call): Likewise.
* sh-tdep.c (sh_push_dummy_call_fpu): Likewise.
(sh_push_dummy_call_nofpu): Likewise.
* sparc-tdep.c (sparc32_store_arguments): Likewise.
(sparc32_push_dummy_call): Likewise.
* sparc64-tdep.c (sparc64_store_arguments): Likewise.
(sparc64_push_dummy_call): Likewise.
* spu-tdep.c (spu_push_dummy_call): Likewise.
* tic6x-tdep.c (tic6x_push_dummy_call): Likewise.
* tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
* v850-tdep.c (v850_push_dummy_call): Likewise.
* vax-tdep.c (vax_push_dummy_call): Likewise.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise.
* xtensa-tdep.c (xtensa_push_dummy_call): Likewise.
|
|
I've encountered a GDB crash when trying to read registers from a remote
stub that provided a target.xml with vector registers, but without the
'vec128' data type. The crash is caused by NULL register type entries for
the "concatenated" pseudo-registers v0-v15. These NULL entries are
introduced by the logic in s390_pseudo_register_type(), where the tdesc
type 'vec128' is returned unconditionally -- even if it doesn't exist (is
NULL).
The fixed logic for determining a "concatenated" vector register's type
now returns the type of the raw register v16 instead. This also makes
sure that all vector register have the same type.
gdb/ChangeLog:
* s390-tdep.c (s390_pseudo_register_type): For v0-v15 don't yield
the possibly non-existent tdesc type 'vec128', but the type of raw
register v16 instead.
|
|
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
|
|
The BASR instruction behaves differently depending on whether the second
operand is a number from 1 to 15, or zero. In the former case BASR jumps
to the address contained in the general register of that number, but in
the latter case no jump is performed. GDB's displaced-stepping logic does
not distinguish these cases, although it should.
This is fixed. In the case where no jump is performed the PC is adjusted
to point back after the original instruction. Otherwise the PC is left
alone.
gdb/ChangeLog:
* s390-tdep.c (s390_displaced_step_fixup): Adjust PC for a
non-branching basr.
|
|
The recent C++ification of target_ops replaced references to the old
"current_target" squashed target throughout with references to a
"target_stack" pointer. I had picked the "target_stack" name very
early in the multi-target work, and managed to stick with it, even
though it's a bit of a misnomer, since it isn't really a "target
stack" object, but a pointer into the current top target in the stack.
As I'm splitting more pieces off of the multi-target branch, I've come
to think that it's better to rename it now. A following patch will
introduce a new class to represent a target stack, and "target_stack"
would be _its_ ideal name. (In the branch, the class is called
a_target_stack to work around the clash.)
Thus this commit renames target_stack to current_top_target and
replaces all references throughout. Also, while at it,
current_top_target is made a function instead of a pointer, to make it
possible to change its internal implementation without leaking
implementation details out. In a couple patches, the implementation
of the function will change to refer to a target stack object, and
then further down the multi-target work, it'll change again to find
the right target stack for the current inferior.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_stack): Delete.
(current_top_target): Declare function.
* target.c (target_stack): Delete.
(g_current_top_target): New.
(current_top_target): New function.
* auxv.c: Use current_top_target instead of target_stack
throughout.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* corefile.c: Likewise.
* elfread.c: Likewise.
* eval.c: Likewise.
* exceptions.c: Likewise.
* frame.c: Likewise.
* gdbarch-selftests.c: Likewise.
* gnu-v3-abi.c: Likewise.
* ia64-tdep.c: Likewise.
* ia64-vms-tdep.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* linespec.c: Likewise.
* linux-tdep.c: Likewise.
* minsyms.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* procfs.c: Likewise.
* regcache.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-tdep.c: Likewise.
* solib-aix.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib-target.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* target.h: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* windows-tdep.c: Likewise.
* mi/mi-main.c: Likewise.
|
|
Remove regcache_raw_supply, update callers to use
detached_regcache::raw_supply.
gdb/ChangeLog:
* regcache.h (regcache_raw_supply): Remove, update callers to
use detached_regcache::raw_supply.
* regcache.c (regcache_raw_supply): Remove.
|
|
Remove regcache_cooked_write_part, update callers to use
regcache::cooked_write_part.
gdb/ChangeLog:
* regcache.h (regcache_cooked_write_part): Remove, update
callers to use regcache::cooked_write_part.
* regcache.c (regcache_cooked_write_part): Remove.
|
|
Remove regcache_cooked_read_part, update callers to use
readable_regcache::cooked_read_part.
gdb/ChangeLog:
* regcache.h (regcache_cooked_read_part): Remove, update callers
to use readable_regcache::cooked_read_part.
* regcache.c (regcache_cooked_read_part): Remove.
|
|
Remove regcache_cooked_write, update callers to use
regcache::cooked_write.
gdb/ChangeLog:
* regcache.h (regcache_cooked_write): Remove, update callers to
use regcache::cooked_write.
* regcache.c (regcache_cooked_write): Remove.
|
|
Remove regcache_cooked_read, update callers to use
readable_regcache::cooked_read instead.
gdb/ChangeLog:
* regcache.h (regcache_cooked_read): Remove, update callers to
use readable_regcache::cooked_read instead.
* regcache.c (regcache_cooked_read): Remove.
|
