| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
|
|
This patch fixes a problem that prevented use of the Dwarf unwinders on SPU,
because dwarf2-frame.c common code did not support the situation where the
stack and/or frame pointer is maintained in a *vector* register. This is
because read_addr_from_reg is hard-coded to assume that such pointers can
be read from registers via a simple get_frame_register / unpack_pointer
operation.
Now, there *is* a routine address_from_register that calls into the
appropriate tdep routines to handle pointer values in "weird" registers
like on SPU, but it turns out I cannot simply change dwarf2-frame.c to
use address_from_register. This is because address_from_register uses
value_from_register to create a (temporary) value, and that routine
at some point calls get_frame_id in order to set up that value's
VALUE_FRAME_ID entry.
However, the dwarf2-frame.c read_addr_from_reg routine will be called
during early unwinding (to unwind the frame's CFA), at which point the
frame's ID is not actually known yet! This would cause an assert.
On the other hand, we may notice that VALUE_FRAME_ID is only needed in the
value returned by value_from_register if that value is later used as an
lvalue. But this is obviously never done to the temporary value used in
address_from_register. So, if we could change address_from_register to
not call value_from_register but instead accept constructing a value
that doesn't have VALUE_FRAME_ID set, things should be fine.
To do that, we can change the value_from_register callback to accept
a FRAME_ID instead of a FRAME; the only existing uses of the FRAME
argument were either to extract its frame ID, or its gdbarch. (To
keep a way of getting at the latter, we also change the callback's
type from "f" to "m".) Together with the required follow-on changes
in the existing value_from_register implementations (including the
default one), this seems to fix the problem.
As another minor interface cleanup, I've removed the explicit TYPE
argument from address_from_register. This routine really always
uses a default pointer type, and in the new implementation it -to
some extent- relies on that fact, in that it will now no longer
handle types that require gdbarch_convert_register_p handling.
gdb:
2014-04-17 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (value_from_register): Make class "m" instead of "f".
Replace FRAME argument with FRAME_ID.
* gdbarch.c, gdbarch.h: Regenerate.
* findvar.c (default_value_from_register): Add GDBARCH argument;
replace FRAME by FRAME_ID. No longer call get_frame_id.
(value_from_register): Update call to gdbarch_value_from_register.
* value.h (default_value_from_register): Update prototype.
* s390-linux-tdep.c (s390_value_from_register): Update interface
and call to default_value_from_register.
* spu-tdep.c (spu_value_from_register): Likewise.
* findvar.c (address_from_register): Remove TYPE argument.
Do not call value_from_register; use gdbarch_value_from_register
with null_frame_id instead.
* value.h (address_from_register): Update prototype.
* dwarf2-frame.c (read_addr_from_reg): Use address_from_register.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for
address_from_register interface change.
|
|
* syscalls/s390x-linux.xml: New file.
* syscalls/s390-linux.xml: New file.
* s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
(XML_SYSCALL_FILENAME_S390X): Likewise.
(op_svc): New enum value for SVC opcode.
(s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
(s390_linux_get_syscall_number): New function.
(s390_gdbarch_init): Register '*get_syscall_number' and the
syscall xml file name.
* data-directory/Makefile.in (SYSCALLS_FILES): Add
"s390-linux.xml" and "s390x-linux.xml".
* NEWS: Announce new feature.
gdb/testsuite/ChangeLog:
* gdb.base/catch-syscall.exp: Activate test on s390*-linux.
|
|
The test fails on s390 with:
-trace-find frame-number 0^M
&"PC not available\n"^M
^done,found="1",tracepoint="1",traceframe="0",frame={level="-1",addr="<unavailable>",func="??",args=[]}^M
(gdb) ^M
FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: -trace-find frame-number 0
tfile knows to infer the PC from the tracepoint's address if the PC
wasn't collected (tfile_fetch_registers) but, that only works on
targets whose PC register is a raw register, and on s390, the PC
register is a pseudo register.
But even if GDB doesn't know how to infer the value of PC, saying the
current frame is level -1 is a bug:
^done,found="1",tracepoint="1",traceframe="0",frame={level="-1",addr="<unavailable>",func="??",args=[]}^M
^^^^^^^^^
'-1' is the level of the sentinel frame, which should never be visible.
This is caused by the s390's heuristic unwinder accepting the frame
(the fallback heuristic unwinders _always_ accept the frame), but then
the unwind->this_id method throws that "PC not available\n" error.
IOW, the s390's heuristic unwinder was never adjusted to handle
unavailable register values gracefully, which can happen with e.g., a
trimmed core file too.
This is just the minimal necessary for
<unavailable> frames, which at least gets us:
(gdb) tfind
Found trace frame 0, tracepoint 1
#0 <unavailable> in ?? ()
That is, frame #0 instead of -1.
We could get better info out of "info frame" (this patch makes us show
"outermost"), but this change would still be necessary.
gdb/
2014-01-16 Pedro Alves <palves@redhat.com>
* s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
the backchain.
|
|
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
|
|
|
|
This patch extends the current generic parser for SystemTap SDT probe
arguments. It can be almost considered a cleanup, but the main point of
it is actually to allow the generic parser to accept multiple prefixes
and suffixes for the its operands (i.e., integers, register names, and
register indirection).
I have chosen to implement this as a list of const strings, and declare
this list as "static" inside each target's method used to initialize
gdbarch.
This patch is actually a preparation for an upcoming patch for ARM,
which implements the support for multiple integer prefixes (as defined
by ARM's asm spec). And AArch64 will also need this, for the same
reason.
This patch was regtested on all architectures that it touches (i.e.,
i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found.
2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com>
* amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (stap_integer_prefix, stap_integer_suffix)
(stap_register_prefix, stap_register_suffix)
(stap_register_indirection_prefix)
(stap_register_indirection_suffix): Declare as "const char *const
*" instead of "const char *". Adjust printing function. Rename
all of the variables to the plural.
(pstring_list): New function.
* i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* stap-probe.c (stap_is_generic_prefix): New function.
(stap_is_register_prefix): Likewise.
(stap_is_register_indirection_prefix): Likewise.
(stap_is_integer_prefix): Likewise.
(stap_generic_check_suffix): Likewise.
(stap_check_integer_suffix): Likewise.
(stap_check_register_suffix): Likewise.
(stap_check_register_indirection_suffix): Likewise.
(stap_parse_register_operand): Remove unecessary declarations for
variables holding prefix and suffix information. Use the new
functions listed above for checking for prefixes and suffixes.
(stap_parse_single_operand): Likewise.
|
|
As suggested before, rename the S/390-related source files (tdep and nat)
such that "-linux-" occurs in the file name, like with other GNU/Linux
targets. Since no other operating system is currently supported by GDB
on this architecture, this isn't strictly necessary. But the old names
sometimes caused GDB contributors to miss these files when performing a
change that affects all GNU/Linux targets. The latest such incident was
observed here:
https://sourceware.org/ml/gdb-patches/2013-09/msg00619.html
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-tdep.h: Rename to...
* s390-linux-tdep.h: ...here.
* s390-tdep.c: Rename to...
* s390-linux-tdep.c: ...here. Adjust #include.
* s390-nat.c: Rename to...
* s390-linux-nat.c: ...here. Adjust #include.
* config/s390/s390.mh: Rename to...
* config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
s390-linux-nat.o.
* configure.host: Reflect host rename "s390" -> "linux".
* configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
* Makefile.in (ALL_TARGET_OBS): Likewise.
(HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
s390-linux-tdep.h.
(ALLDEPFILES): Reflect rename of .c files.
|
