| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patches removes get_regcache_arch, and use regache->arch () instead.
The motivation of this change is that I am going to move some basic stuff
into a base class of regcache. I don't need to update "client" code
regcache->arch (). On the other hand, this patch shortens the code a
little bit.
gdb:
2017-10-25 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_supply): Use
regcache->arch () instead get_regcache_arch.
* aarch64-fbsd-nat.c (aarch64_fbsd_fetch_inferior_registers):
Likewise.
(aarch64_fbsd_store_inferior_registers): Likewise.
* aarch64-linux-nat.c (fetch_gregs_from_thread): Likewise.
(store_gregs_to_thread): Likewise.
(fetch_fpregs_from_thread): Likewise.
(store_fpregs_to_thread): Likewise.
* aarch64-tdep.c (aarch64_extract_return_value): Likewise.
(aarch64_store_return_value): Likewise.
(aarch64_software_single_step): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
(supply_reg32): Likewise.
(supply_sprs64): Likewise.
(supply_sprs32): Likewise.
(fill_gprs64): Likewise.
(fill_gprs32): Likewise.
(fill_sprs64): Likewise.
(fill_sprs32): Likewise.
(store_regs_user_thread): Likewise.
(store_regs_kernel_thread): Likewise.
* alpha-bsd-nat.c (alphabsd_fetch_inferior_registers): Likewise.
(alphabsd_store_inferior_registers): Likewise.
* alpha-tdep.c (alpha_extract_return_value): Likewise.
(alpha_store_return_value): Likewise.
(alpha_deal_with_atomic_sequence): Likewise.
(alpha_next_pc): Likewise.
(alpha_software_single_step): Likewise.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise.
(amd64bsd_store_inferior_registers): Likewise.
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
Likewise.
(amd64_linux_store_inferior_registers): Likewise.
* amd64-nat.c (amd64_supply_native_gregset): Likewise.
(amd64_collect_native_gregset): Likewise.
* amd64-obsd-tdep.c (amd64obsd_supply_uthread): Likewise.
(amd64obsd_collect_uthread): Likewise.
* amd64-tdep.c (amd64_supply_fpregset): Likewise.
(amd64_collect_fpregset): Likewise.
(amd64_supply_fxsave): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_fxsave): Likewise.
(amd64_collect_xsave): Likewise.
* arc-tdep.c (arc_write_pc): Likewise.
* arch-utils.c (default_skip_permanent_breakpoint): Likewise.
* arm-fbsd-nat.c (arm_fbsd_fetch_inferior_registers): Likewise.
(arm_fbsd_store_inferior_registers): Likewise.
* arm-linux-nat.c (fetch_vfp_regs): Likewise.
(store_vfp_regs): Likewise.
(arm_linux_fetch_inferior_registers): Likewise.
(arm_linux_store_inferior_registers): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
(arm_linux_sigreturn_next_pc): Likewise.
(arm_linux_get_next_pcs_syscall_next_pc): Likewise.
* arm-nbsd-nat.c (arm_supply_gregset): Likewise.
(fetch_register): Likewise.
(store_register): Likewise.
* arm-tdep.c (arm_is_thumb): Likewise.
(displaced_in_arm_mode): Likewise.
(bx_write_pc): Likewise.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_software_single_step): Likewise.
(arm_extract_return_value): Likewise.
(arm_store_return_value): Likewise.
(arm_write_pc): Likewise.
* bfin-tdep.c (bfin_extract_return_value): Likewise.
* bsd-uthread.c (bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* core-regset.c (fetch_core_registers): Likewise.
* corelow.c (get_core_registers): Likewise.
* cris-tdep.c (cris_store_return_value): Likewise.
(cris_extract_return_value): Likewise.
(find_step_target): Likewise.
(find_step_target): Likewise.
(cris_software_single_step): Likewise.
* ctf.c (ctf_fetch_registers): Likewise.
* darwin-nat.c (cancel_breakpoint): Likewise.
* fbsd-tdep.c (fbsd_collect_thread_registers): Likewise.
* frv-tdep.c (frv_extract_return_value): Likewise.
* ft32-tdep.c (ft32_store_return_value): Likewise.
(ft32_extract_return_value): Likewise.
* go32-nat.c (fetch_register): Likewise.
(go32_fetch_registers): Likewise.
(go32_store_registers): Likewise.
(store_register): Likewise.
* h8300-tdep.c (h8300_extract_return_value): Likewise.
(h8300_store_return_value): Likewise.
* hppa-linux-nat.c (fetch_register): Likewise.
(store_register): Likewise.
(hppa_linux_fetch_inferior_registers): Likewise.
(hppa_linux_store_inferior_registers): Likewise.
* i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Likewise.
(i386_darwin_store_inferior_registers): Likewise.
* i386-gnu-nat.c (gnu_fetch_registers): Likewise.
(gnu_store_registers): Likewise.
* i386-linux-nat.c (fetch_register): Likewise.
(store_register): Likewise.
(supply_gregset): Likewise.
(fill_gregset): Likewise.
(i386_linux_fetch_inferior_registers): Likewise.
(i386_linux_store_inferior_registers): Likewise.
(i386_linux_resume): Likewise.
* i386-linux-tdep.c (i386_linux_get_syscall_number_from_regcache):
Likewise.
* i386-nto-tdep.c (i386nto_supply_gregset): Likewise.
* i386-obsd-nat.c (i386obsd_supply_pcb): Likewise.
* i386-obsd-tdep.c (i386obsd_supply_uthread): Likewise.
(i386obsd_collect_uthread): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_supply_fpregset): Likewise.
(i386_collect_fpregset): Likewise.
(i386_mpx_bd_base): Likewise.
* i386-v4-nat.c (supply_fpregset): Likewise.
(fill_fpregset): Likewise.
* i387-tdep.c (i387_supply_fsave): Likewise.
(i387_collect_fsave): Likewise.
(i387_supply_fxsave): Likewise.
(i387_collect_fxsave): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* ia64-linux-nat.c (ia64_linux_fetch_registers): Likewise.
(ia64_linux_store_registers): Likewise.
* ia64-tdep.c (ia64_access_rse_reg): Likewise.
(ia64_extract_return_value): Likewise.
(ia64_store_return_value): Likewise.
(find_func_descr): Likewise.
* inf-child.c (inf_child_fetch_inferior_registers): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_registers): Likewise.
(inf_ptrace_store_registers): Likewise.
* infrun.c (use_displaced_stepping): Likewise.
(displaced_step_prepare_throw): Likewise.
(resume): Likewise.
(proceed): Likewise.
(do_target_wait): Likewise.
(adjust_pc_after_break): Likewise.
(handle_inferior_event_1): Likewise.
(handle_signal_stop): Likewise.
(save_infcall_suspend_state): Likewise.
(restore_infcall_suspend_state): Likewise.
* iq2000-tdep.c (iq2000_extract_return_value): Likewise.
* jit.c (jit_frame_prev_register): Likewise.
* linux-nat.c (save_stop_reason): Likewise.
(linux_nat_wait_1): Likewise.
(resume_stopped_resumed_lwps): Likewise.
* linux-record.c (record_linux_sockaddr): Likewise.
(record_linux_msghdr): Likewise.
(record_linux_system_call): Likewise.
* linux-tdep.c (linux_collect_thread_registers): Likewise.
* lm32-tdep.c (lm32_extract_return_value): Likewise.
(lm32_store_return_value): Likewise.
* m32c-tdep.c (m32c_read_flg): Likewise.
(m32c_pseudo_register_read): Likewise.
(m32c_pseudo_register_write): Likewise.
* m32r-linux-tdep.c (m32r_linux_supply_gregset): Likewise.
(m32r_linux_collect_gregset): Likewise.
* m32r-tdep.c (m32r_store_return_value): Likewise.
(m32r_extract_return_value): Likewise.
* m68k-bsd-nat.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_collect_fpregset): Likewise.
* m68k-bsd-tdep.c (m68kbsd_supply_fpregset): Likewise.
* m68k-linux-nat.c (fetch_register): Likewise.
(old_fetch_inferior_registers): Likewise.
(old_store_inferior_registers): Likewise.
(store_regs): Likewise.
* m68k-tdep.c (m68k_svr4_extract_return_value): Likewise.
(m68k_svr4_store_return_value): Likewise.
* m88k-tdep.c (m88k_store_arguments): Likewise.
* mi/mi-main.c (mi_cmd_data_list_changed_registers): Likewise.
(mi_cmd_data_write_register_values): Likewise.
* mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers): Likewise.
(mips_fbsd_store_inferior_registers): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Likewise.
(mips_fbsd_supply_gregs): Likewise.
(mips_fbsd_collect_fpregs): Likewise.
(mips_fbsd_collect_gregs): Likewise.
(mips_fbsd_supply_fpregset): Likewise.
(mips_fbsd_collect_fpregset): Likewise.
(mips_fbsd_supply_gregset): Likewise.
(mips_fbsd_collect_gregset): Likewise.
* mips-linux-nat.c (supply_gregset): Likewise.
(fill_gregset): Likewise.
(supply_fpregset): Likewise.
(fill_fpregset): Likewise.
* mips-linux-tdep.c (mips_supply_gregset): Likewise.
(mips_fill_gregset): Likewise.
(mips_supply_fpregset): Likewise.
(mips_fill_fpregset): Likewise.
(mips64_supply_gregset): Likewise.
(micromips_linux_sigframe_validate): Likewise.
* mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise.
(mipsnbsd_fetch_inferior_registers): Likewise.
(mipsnbsd_store_inferior_registers): Likewise.
* mips-nbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise.
(mipsnbsd_supply_gregset): Likewise.
(mipsnbsd_iterate_over_regset_sections): Likewise.
(mipsnbsd_supply_reg): Likewise.
(mipsnbsd_supply_fpreg): Likewise.
* mips-tdep.c (mips_in_frame_stub): Likewise.
(mips_dummy_id): Likewise.
(is_octeon_bbit_op): Likewise.
(micromips_bc1_pc): Likewise.
(extended_mips16_next_pc): Likewise.
(mips16_next_pc): Likewise.
(deal_with_atomic_sequence): Likewise.
* moxie-tdep.c (moxie_process_readu): Likewise.
* nios2-tdep.c (nios2_get_next_pc): Likewise.
* nto-procfs.c (procfs_store_registers): Likewise.
* ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers): Likewise.
(ppcfbsd_store_inferior_registers): Likewise.
* ppc-linux-nat.c (fetch_vsx_register): Likewise.
(fetch_altivec_register): Likewise.
(get_spe_registers): Likewise.
(fetch_spe_register): Likewise.
(fetch_altivec_registers): Likewise.
(fetch_all_gp_regs): Likewise.
(fetch_all_fp_regs): Likewise.
(store_vsx_register): Likewise.
(store_altivec_register): Likewise.
(set_spe_registers): Likewise.
(store_spe_register): Likewise.
(store_altivec_registers): Likewise.
(store_all_gp_regs): Likewise.
(store_all_fp_regs): Likewise.
* ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise.
(ppc_linux_collect_gregset): Likewise.
(ppc_canonicalize_syscall): Likewise.
(ppc_linux_record_signal): Likewise.
(ppu2spu_prev_register): Likewise.
* ppc-nbsd-nat.c (ppcnbsd_supply_pcb): Likewise.
* ppc-obsd-nat.c (ppcobsd_fetch_registers): Likewise.
(ppcobsd_store_registers): Likewise.
* ppc-ravenscar-thread.c (ppc_ravenscar_generic_fetch_registers):
Likewise.
(ppc_ravenscar_generic_store_registers): Likewise.
* procfs.c (procfs_fetch_registers): Likewise.
(procfs_store_registers): Likewise.
* ravenscar-thread.c (ravenscar_fetch_registers): Likewise.
(ravenscar_store_registers): Likewise.
(ravenscar_prepare_to_store): Likewise.
* record-btrace.c (record_btrace_fetch_registers): Likewise.
* record-full.c (record_full_wait_1): Likewise.
(record_full_registers_change): Likewise.
(record_full_store_registers): Likewise.
(record_full_core_fetch_registers): Likewise.
(record_full_save): Likewise.
(record_full_goto_insn): Likewise.
* regcache.c (regcache_register_size): Likewise.
(get_regcache_arch): Remove.
(regcache_read_pc): Likewise.
* regcache.h (get_regcache_arch): Remove.
* remote-sim.c (gdbsim_fetch_register): Likewise.
(gdbsim_store_register): Likewise.
* remote.c (fetch_register_using_p): Likewise.
(send_g_packet): Likewise.
(remote_prepare_to_store): Likewise.
(store_registers_using_G): Likewise.
* reverse.c (save_bookmark_command): Likewise.
(goto_bookmark_command): Likewise.
* rs6000-aix-tdep.c (branch_dest): Likewise.
* rs6000-nat.c (rs6000_ptrace64): Likewise.
(fetch_register): Likewise.
* rs6000-tdep.c (ppc_supply_reg): Likewise.
(ppc_collect_reg): Likewise.
(ppc_collect_gregset): Likewise.
(ppc_collect_fpregset): Likewise.
(ppc_collect_vsxregset): Likewise.
(ppc_collect_vrregset): Likewise.
(ppc_displaced_step_hw_singlestep): Likewise.
(rs6000_pseudo_register_read): Likewise.
(rs6000_pseudo_register_write): Likewise.
* s390-linux-nat.c (supply_gregset): Likewise.
(fill_gregset): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.
* s390-linux-tdep.c (s390_write_pc): Likewise.
(s390_software_single_step): Likewise.
(s390_all_but_pc_registers_record): Likewise.
(s390_linux_syscall_record): Likewise.
* sentinel-frame.c (sentinel_frame_prev_arch): Likewise.
* sh-nbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise.
(shnbsd_store_inferior_registers): Likewise.
* sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
(sh_extract_return_value_fpu): Likewise.
(sh_store_return_value_nofpu): Likewise.
(sh_corefile_supply_regset): Likewise.
(sh_corefile_collect_regset): Likewise.
* sh64-tdep.c (sh64_extract_return_value): Likewise.
(sh64_store_return_value): Likewise.
* sparc-linux-tdep.c (sparc32_linux_collect_core_fpregset): Likewise.
* sparc-nat.c (sparc_fetch_inferior_registers): Likewise.
(sparc_store_inferior_registers): Likewise.
* sparc-ravenscar-thread.c (register_in_thread_descriptor_p): Likewise.
(sparc_ravenscar_prepare_to_store): Likewise.
* sparc-tdep.c (sparc32_store_arguments): Likewise.
(sparc_analyze_control_transfer): Likewise.
(sparc_step_trap): Likewise.
(sparc_software_single_step): Likewise.
(sparc32_gdbarch_init): Likewise.
(sparc_supply_rwindow): Likewise.
(sparc_collect_rwindow): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_collect_core_fpregset): Likewise.
* sparc64-nbsd-nat.c (sparc64nbsd_supply_gregset): Likewise.
(sparc64nbsd_collect_gregset): Likewise.
(sparc64nbsd_supply_fpregset): Likewise.
(sparc64nbsd_collect_fpregset): Likewise.
* sparc64-tdep.c (sparc64_store_arguments): Likewise.
(sparc64_supply_gregset): Likewise.
(sparc64_collect_gregset): Likewise.
(sparc64_supply_fpregset): Likewise.
(sparc64_collect_fpregset): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-tdep.c (spu_unwind_sp): Likewise.
(spu2ppu_prev_register): Likewise.
(spu_memory_remove_breakpoint): Likewise.
* stack.c (return_command): Likewise.
* tic6x-tdep.c (tic6x_extract_signed_field): Likewise.
* tracefile-tfile.c (tfile_fetch_registers): Likewise.
* tracefile.c (trace_save_ctf): Likewise.
* windows-nat.c (do_windows_fetch_inferior_registers): Likewise.
(do_windows_store_inferior_registers): Likewise.
(windows_resume): Likewise.
* xtensa-linux-nat.c (fill_gregset): Likewise.
(supply_gregset_reg): Likewise.
* xtensa-tdep.c (xtensa_register_write_masked): Likewise.
(xtensa_register_read_masked): Likewise.
(xtensa_supply_gregset): Likewise.
(xtensa_extract_return_value): Likewise.
(xtensa_store_return_value): Likewise.
|
|
I have the goal of "poisoning" the XNEW/xfree-family of functions, so
that we catch their usages with non-POD types. A few things need to be
fixed in the mean time, this is one.
The common lwp code in linux-nat.c and gdbserver/linux-low.c xfrees the
private lwp data of type arch_lwp_info. However, that type is opaque
from its point of view, as its defined differently in each arch-specific
implementation. This trips on the std::is_pod<T> check, since the
compiler can't tell whether the type is POD or not if it doesn't know
about it.
My initial patch [1] made a class hierarchy with a virtual destructor.
However, as Pedro pointed out, we only have one native architecture at
the time built in gdb and gdbserver, so that's overkill. Instead, we
can move the responsibility of free'ing arch_lwp_info to the arch code
(which is also the one that allocated it in the first place). This is
what this patch does.
Also, I had the concern that if we wanted to use C++ features in these
structures, we would have a problem with the one-definition rule.
However, since a build will only have one version of arch_lwp_info,
that's not a problem.
There are changes in arch-specific files, I was only able to built-test
this patch with the following cross-compilers:
aarch64-linux-gnu
alpha-linux-gnu
arm-linux-gnueabihf
hppa-linux-gnu
m68k-linux-gnu
mips64el-linux-gnuabi64
powerpc64-linux-gnu
s390x-linux-gnu
sh4-linux-gnu
sparc64-linux-gnu
x86_64-linux-gnu
x86_64-w64-mingw32
A buildbot run didn't find any regression.
[1] https://sourceware.org/ml/gdb-patches/2017-08/msg00255.html
gdb/ChangeLog:
* linux-nat.h (linux_nat_set_delete_thread): New declaration.
* linux-nat.c (linux_nat_delete_thread): New variable.
(lwp_free): Invoke linux_nat_delete_thread if set.
(linux_nat_set_delete_thread): New function.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Assign
thread delete callback.
* arm-linux-nat.c (arm_linux_delete_thread): New function.
(_initialize_arm_linux_nat): Assign thread delete callback.
* s390-linux-nat.c (s390_delete_thread): New function.
(_initialize_s390_nat): Assign thread delete callback.
* x86-linux-nat.c (x86_linux_add_target): Likewise.
* nat/aarch64-linux.c (aarch64_linux_delete_thread): New
function.
* nat/aarch64-linux.h (aarch64_linux_delete_thread): New
declaration.
* nat/x86-linux.c (x86_linux_delete_thread): New function.
* nat/x86-linux.h (x86_linux_delete_thread): New declaration.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (the_low_target): Add thread delete
callback.
* linux-arm-low.c (arm_delete_thread): New function.
(the_low_target): Add thread delete callback.
* linux-bfin-low.c (the_low_target): Likewise.
* linux-crisv32-low.c (the_low_target): Likewise.
* linux-low.c (delete_lwp): Invoke delete_thread callback if
set.
* linux-low.h (struct linux_target_ops) <delete_thread>: New
field.
* linux-m32r-low.c (the_low_target): Add thread delete callback.
* linux-mips-low.c (mips_linux_delete_thread): New function.
(the_low_target): Add thread delete callback.
* linux-ppc-low.c (the_low_target): Likewise.
* linux-s390-low.c (the_low_target): Likewise.
* linux-sh-low.c (the_low_target): Likewise.
* linux-tic6x-low.c (the_low_target): Likewise.
* linux-tile-low.c (the_low_target): Likewise.
* linux-x86-low.c (the_low_target): Likewise.
* linux-xtensa-low.c (the_low_target): Likewise.
|
|
Recognize targets with the new guarded-storage feature and then present
the guarded-storage registers and the Linux-specific guarded-storage
broadcast control block appropriately.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_gs): New static variable.
(s390_linux_fetch_inferior_registers): Handle guarded-storage
control block and guarded-storage broadcast control regsets.
(s390_read_description): Detect whether the target has
guarded-storage support, return appropriate tdesc.
* s390-linux-tdep.c (features/s390-gs-linux64.c): New include.
(features/s390x-gs-linux64.c): Likewise.
(struct gdbarch_tdep) <have_gs>: New field.
(s390_regmap_gs, s390_regmap_gsbc, s390_gs_regset)
(s390_gsbc_regset): New variables.
(s390_iterate_over_regset_sections): Iterate over s390_gs_regset
and s390_gsbc_regset, if applicable.
(s390_core_read_description): Check whether core file was from a
target with guarded-storage support; include appropriate regsets.
(s390_gdbarch_init): Add registers for guarded-storage support.
(_initialize_s390_tdep): Initialize new target descriptions that
include registers for guarded-storage support.
* s390-linux-tdep.h (HWCAP_S390_GS, S390_GSD_REGNUM)
(S390_GSSM_REGNUM, S390_GSEPLA_REGNUM)
(S390_BC_GSD_REGNUM, S390_BC_GSSM_REGNUM): New defines.
(S390_NUM_REGS): Adjust macro definition.
(s390_gs_regset, s390_gsbc_regset, tdesc_s390_gs_linux64)
(tdesc_s390x_gs_linux64): New declarations.
|
|
These prototypes were required when compiling GDB as C but are not
required for C++.
gdb/ChangeLog:
* aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat
prototype.
* aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep
prototype.
* aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep
prototype.
* aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype.
* ada-exp.y: Remove _initialize_ada_exp prototype.
* ada-lang.c: Remove _initialize_ada_language prototype.
* ada-tasks.c: Remove _initialize_tasks prototype.
* addrmap.c: Remove _initialize_addrmap prototype.
* agent.c: Remove _initialize_agent prototype.
* aix-thread.c: Remove _initialize_aix_thread prototype.
* alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype.
* alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype.
* alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep
prototype.
* alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype.
* alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype.
* alpha-tdep.c: Remove _initialize_alpha_tdep prototype.
* amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep
prototype.
* amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep
prototype.
* amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype.
* amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype.
* amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype.
* amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep
prototype.
* amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype.
* amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype.
* amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype.
* amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype.
* amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* amd64-tdep.c: Remove _initialize_amd64_tdep prototype.
* amd64-windows-nat.c: Remove _initialize_amd64_windows_nat
prototype.
* amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep
prototype.
* annotate.c: Remove _initialize_annotate prototype.
* arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype.
* arc-tdep.c: Remove _initialize_arc_tdep prototype.
* arch-utils.c: Remove _initialize_gdbarch_utils prototype.
* arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype.
* arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype.
* arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype.
* arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype.
* arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep
prototype.
* arm-tdep.c: Remove _initialize_arm_tdep prototype.
* arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype.
* auto-load.c: Remove _initialize_auto_load prototype.
* auxv.c: Remove _initialize_auxv prototype.
* avr-tdep.c: Remove _initialize_avr_tdep prototype.
* ax-gdb.c: Remove _initialize_ax_gdb prototype.
* bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype.
* bfin-tdep.c: Remove _initialize_bfin_tdep prototype.
* break-catch-sig.c: Remove _initialize_break_catch_sig prototype.
* break-catch-syscall.c: Remove _initialize_break_catch_syscall
prototype.
* break-catch-throw.c: Remove _initialize_break_catch_throw
prototype.
* breakpoint.c: Remove _initialize_breakpoint prototype.
* bsd-uthread.c: Remove _initialize_bsd_uthread prototype.
* btrace.c: Remove _initialize_btrace prototype.
* charset.c: Remove _initialize_charset prototype.
* cli/cli-cmds.c: Remove _initialize_cli_cmds prototype.
* cli/cli-dump.c: Remove _initialize_cli_dump prototype.
* cli/cli-interp.c: Remove _initialize_cli_interp prototype.
* cli/cli-logging.c: Remove _initialize_cli_logging prototype.
* cli/cli-script.c: Remove _initialize_cli_script prototype.
* coff-pe-read.c: Remove _initialize_coff_pe_read prototype.
* coffread.c: Remove _initialize_coffread prototype.
* compile/compile.c: Remove _initialize_compile prototype.
* complaints.c: Remove _initialize_complaints prototype.
* completer.c: Remove _initialize_completer prototype.
* copying.awk: Remove _initialize_copying prototype.
* copying.c: Regenerate.
* core-regset.c: Remove _initialize_core_regset prototype.
* corefile.c: Remove _initialize_core prototype.
* corelow.c: Remove _initialize_corelow prototype.
* cp-abi.c: Remove _initialize_cp_abi prototype.
* cp-namespace.c: Remove _initialize_cp_namespace prototype.
* cp-support.c: Remove _initialize_cp_support prototype.
* cp-valprint.c: Remove _initialize_cp_valprint prototype.
* cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype.
* cris-tdep.c: Remove _initialize_cris_tdep prototype.
* ctf.c: Remove _initialize_ctf prototype.
* d-lang.c: Remove _initialize_d_language prototype.
* darwin-nat-info.c: Remove _initialize_darwin_info_commands
prototype.
* darwin-nat.c: Remove _initialize_darwin_inferior prototype.
* dbxread.c: Remove _initialize_dbxread prototype.
* dcache.c: Remove _initialize_dcache prototype.
* demangle.c: Remove _initialize_demangler prototype.
* disasm-selftests.c: Remove _initialize_disasm_selftests
prototype.
* disasm.c: Remove _initialize_disasm prototype.
* dtrace-probe.c: Remove _initialize_dtrace_probe prototype.
* dummy-frame.c: Remove _initialize_dummy_frame prototype.
* dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame
prototype.
* dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype.
* dwarf2expr.c: Remove _initialize_dwarf2expr prototype.
* dwarf2loc.c: Remove _initialize_dwarf2loc prototype.
* dwarf2read.c: Remove _initialize_dwarf2_read prototype.
* elfread.c: Remove _initialize_elfread prototype.
* exec.c: Remove _initialize_exec prototype.
* extension.c: Remove _initialize_extension prototype.
* f-lang.c: Remove _initialize_f_language prototype.
* f-valprint.c: Remove _initialize_f_valprint prototype.
* fbsd-nat.c: Remove _initialize_fbsd_nat prototype.
* fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype.
* filesystem.c: Remove _initialize_filesystem prototype.
* findcmd.c: Remove _initialize_mem_search prototype.
* fork-child.c: Remove _initialize_fork_child prototype.
* frame-base.c: Remove _initialize_frame_base prototype.
* frame-unwind.c: Remove _initialize_frame_unwind prototype.
* frame.c: Remove _initialize_frame prototype.
* frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype.
* frv-tdep.c: Remove _initialize_frv_tdep prototype.
* ft32-tdep.c: Remove _initialize_ft32_tdep prototype.
* gcore.c: Remove _initialize_gcore prototype.
* gdb_bfd.c: Remove _initialize_gdb_bfd prototype.
* gdbarch.c: Regenerate.
* gdbarch.sh: Remove _initialize_gdbarch prototype.
* gdbtypes.c: Remove _initialize_gdbtypes prototype.
* gnu-nat.c: Remove _initialize_gnu_nat prototype.
* gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype.
* gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype.
* go-lang.c: Remove _initialize_go_language prototype.
* go32-nat.c: Remove _initialize_go32_nat prototype.
* guile/guile.c: Remove _initialize_guile prototype.
* h8300-tdep.c: Remove _initialize_h8300_tdep prototype.
* hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype.
* hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype.
* hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype.
* hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype.
* hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype.
* hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype.
* hppa-tdep.c: Remove _initialize_hppa_tdep prototype.
* i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype.
* i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep
prototype.
* i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep
prototype.
* i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype.
* i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype.
* i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype.
* i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype.
* i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype.
* i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype.
* i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype.
* i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype.
* i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype.
* i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype.
* i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype.
* i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype.
* i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype.
* i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* i386-tdep.c: Remove _initialize_i386_tdep prototype.
* i386-windows-nat.c: Remove _initialize_i386_windows_nat
prototype.
* ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame
prototype.
* ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype.
* ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype.
* ia64-tdep.c: Remove _initialize_ia64_tdep prototype.
* ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype.
* infcall.c: Remove _initialize_infcall prototype.
* infcmd.c: Remove _initialize_infcmd prototype.
* inferior.c: Remove _initialize_inferiors prototype.
* inflow.c: Remove _initialize_inflow prototype.
* infrun.c: Remove _initialize_infrun prototype.
* interps.c: Remove _initialize_interpreter prototype.
* iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype.
* jit.c: Remove _initialize_jit prototype.
* language.c: Remove _initialize_language prototype.
* linux-fork.c: Remove _initialize_linux_fork prototype.
* linux-nat.c: Remove _initialize_linux_nat prototype.
* linux-tdep.c: Remove _initialize_linux_tdep prototype.
* linux-thread-db.c: Remove _initialize_thread_db prototype.
* lm32-tdep.c: Remove _initialize_lm32_tdep prototype.
* m2-lang.c: Remove _initialize_m2_language prototype.
* m32c-tdep.c: Remove _initialize_m32c_tdep prototype.
* m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype.
* m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype.
* m32r-tdep.c: Remove _initialize_m32r_tdep prototype.
* m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype.
* m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-tdep.c: Remove _initialize_m68k_tdep prototype.
* m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* machoread.c: Remove _initialize_machoread prototype.
* macrocmd.c: Remove _initialize_macrocmd prototype.
* macroscope.c: Remove _initialize_macroscope prototype.
* maint.c: Remove _initialize_maint_cmds prototype.
* mdebugread.c: Remove _initialize_mdebugread prototype.
* memattr.c: Remove _initialize_mem prototype.
* mep-tdep.c: Remove _initialize_mep_tdep prototype.
* mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype.
* mi/mi-cmds.c: Remove _initialize_mi_cmds prototype.
* mi/mi-interp.c: Remove _initialize_mi_interp prototype.
* mi/mi-main.c: Remove _initialize_mi_main prototype.
* microblaze-linux-tdep.c: Remove
_initialize_microblaze_linux_tdep prototype.
* microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype.
* mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype.
* mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype.
* mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype.
* mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype.
* mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype.
* mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype.
* mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype.
* mips-tdep.c: Remove _initialize_mips_tdep prototype.
* mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype.
* mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep
prototype.
* mipsread.c: Remove _initialize_mipsread prototype.
* mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep
prototype.
* mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype.
* moxie-tdep.c: Remove _initialize_moxie_tdep prototype.
* msp430-tdep.c: Remove _initialize_msp430_tdep prototype.
* mt-tdep.c: Remove _initialize_mt_tdep prototype.
* nds32-tdep.c: Remove _initialize_nds32_tdep prototype.
* nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep
prototype.
* nios2-tdep.c: Remove _initialize_nios2_tdep prototype.
* nto-procfs.c: Remove _initialize_procfs prototype.
* nto-tdep.c: Remove _initialize_nto_tdep prototype.
* objc-lang.c: Remove _initialize_objc_language prototype.
* objfiles.c: Remove _initialize_objfiles prototype.
* observer.c: Remove observer_test_first_notification_function,
observer_test_second_notification_function,
observer_test_third_notification_function, and
_initialize_observer prototypes.
* opencl-lang.c: Remove _initialize_opencl_language prototypes.
* osabi.c: Remove _initialize_gdb_osabi prototype.
* osdata.c: Remove _initialize_osdata prototype.
* p-valprint.c: Remove _initialize_pascal_valprint prototype.
* parse.c: Remove _initialize_parse prototype.
* ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype.
* ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype.
* ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype.
* ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype.
* ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype.
* ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype.
* ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype.
* ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype.
* printcmd.c: Remove _initialize_printcmd prototype.
* probe.c: Remove _initialize_probe prototype.
* proc-api.c: Remove _initialize_proc_api prototype.
* proc-events.c: Remove _initialize_proc_events prototype.
* proc-service.c: Remove _initialize_proc_service prototype.
* procfs.c: Remove _initialize_procfs prototype.
* psymtab.c: Remove _initialize_psymtab prototype.
* python/python.c: Remove _initialize_python prototype.
* ravenscar-thread.c: Remove _initialize_ravenscar prototype.
* record-btrace.c: Remove _initialize_record_btrace prototype.
* record-full.c: Remove _initialize_record_full prototype.
* record.c: Remove _initialize_record prototype.
* regcache.c: Remove _initialize_regcache prototype.
* reggroups.c: Remove _initialize_reggroup prototype.
* remote-notif.c: Remove _initialize_notif prototype.
* remote-sim.c: Remove _initialize_remote_sim prototype.
* remote.c: Remove _initialize_remote prototype.
* reverse.c: Remove _initialize_reverse prototype.
* rl78-tdep.c: Remove _initialize_rl78_tdep prototype.
* rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype.
* rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep
prototype.
* rs6000-nat.c: Remove _initialize_rs6000_nat prototype.
* rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype.
* rust-exp.y: Remove _initialize_rust_exp prototype.
* rx-tdep.c: Remove _initialize_rx_tdep prototype.
* s390-linux-nat.c: Remove _initialize_s390_nat prototype.
* s390-linux-tdep.c: Remove _initialize_s390_tdep prototype.
* score-tdep.c: Remove _initialize_score_tdep prototype.
* selftest-arch.c: Remove _initialize_selftests_foreach_arch
prototype.
* ser-go32.c: Remove _initialize_ser_dos prototype.
* ser-mingw.c: Remove _initialize_ser_windows prototype.
* ser-pipe.c: Remove _initialize_ser_pipe prototype.
* ser-tcp.c: Remove _initialize_ser_tcp prototype.
* ser-unix.c: Remove _initialize_ser_hardwire prototype.
* serial.c: Remove _initialize_serial prototype.
* sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype.
* sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype.
* sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype.
* sh-tdep.c: Remove _initialize_sh_tdep prototype.
* skip.c: Remove _initialize_step_skip prototype.
* sol-thread.c: Remove _initialize_sol_thread prototype.
* solib-aix.c: Remove _initialize_solib_aix prototype.
* solib-darwin.c: Remove _initialize_darwin_solib prototype.
* solib-dsbt.c: Remove _initialize_dsbt_solib prototype.
* solib-frv.c: Remove _initialize_frv_solib prototype.
* solib-spu.c: Remove _initialize_spu_solib prototype.
* solib-svr4.c: Remove _initialize_svr4_solib prototype.
* solib-target.c: Remove _initialize_solib_target prototype.
* solib.c: Remove _initialize_solib prototype.
* source.c: Remove _initialize_source prototype.
* sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype.
* sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep
prototype.
* sparc-nat.c: Remove _initialize_sparc_nat prototype.
* sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype.
* sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype.
* sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep
prototype.
* sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype.
* sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype.
* sparc-tdep.c: Remove _initialize_sparc_tdep prototype.
* sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat
prototype.
* sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep
prototype.
* sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat
prototype.
* sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep
prototype.
* sparc64-nat.c: Remove _initialize_sparc64_nat prototype.
* sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat
prototype.
* sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep
prototype.
* sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat
prototype.
* sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep
prototype.
* sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep
prototype.
* spu-linux-nat.c: Remove _initialize_spu_nat prototype.
* spu-multiarch.c: Remove _initialize_spu_multiarch prototype.
* spu-tdep.c: Remove _initialize_spu_tdep prototype.
* stabsread.c: Remove _initialize_stabsread prototype.
* stack.c: Remove _initialize_stack prototype.
* stap-probe.c: Remove _initialize_stap_probe prototype.
* std-regs.c: Remove _initialize_frame_reg prototype.
* symfile-debug.c: Remove _initialize_symfile_debug prototype.
* symfile-mem.c: Remove _initialize_symfile_mem prototype.
* symfile.c: Remove _initialize_symfile prototype.
* symmisc.c: Remove _initialize_symmisc prototype.
* symtab.c: Remove _initialize_symtab prototype.
* target-dcache.c: Remove _initialize_target_dcache prototype.
* target-descriptions.c: Remove _initialize_target_descriptions
prototype.
* thread.c: Remove _initialize_thread prototype.
* tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep
prototype.
* tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype.
* tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype.
* tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep
prototype.
* tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype.
* tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype.
* tracefile.c: Remove _initialize_tracefile prototype.
* tracepoint.c: Remove _initialize_tracepoint prototype.
* tui/tui-hooks.c: Remove _initialize_tui_hooks prototype.
* tui/tui-interp.c: Remove _initialize_tui_interp prototype.
* tui/tui-layout.c: Remove _initialize_tui_layout prototype.
* tui/tui-regs.c: Remove _initialize_tui_regs prototype.
* tui/tui-stack.c: Remove _initialize_tui_stack prototype.
* tui/tui-win.c: Remove _initialize_tui_win prototype.
* tui/tui.c: Remove _initialize_tui prototype.
* typeprint.c: Remove _initialize_typeprint prototype.
* user-regs.c: Remove _initialize_user_regs prototype.
* utils.c: Remove _initialize_utils prototype.
* v850-tdep.c: Remove _initialize_v850_tdep prototype.
* valarith.c: Remove _initialize_valarith prototype.
* valops.c: Remove _initialize_valops prototype.
* valprint.c: Remove _initialize_valprint prototype.
* value.c: Remove _initialize_values prototype.
* varobj.c: Remove _initialize_varobj prototype.
* vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype.
* vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype.
* vax-tdep.c: Remove _initialize_vax_tdep prototype.
* windows-nat.c: Remove _initialize_windows_nat,
_initialize_check_for_gdb_ini, and _initialize_loadable
prototypes.
* windows-tdep.c: Remove _initialize_windows_tdep prototype.
* xcoffread.c: Remove _initialize_xcoffread prototype.
* xml-support.c: Remove _initialize_xml_support prototype.
* xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype.
* xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat
prototype.
* xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep
prototype.
* xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.
|
|
This patch contains almost all of the remaining changes needed to make
to_fetch_registers/to_store_registers/to_prepare_to_store independent of
inferior_ptid. It contains only some "trivial" changes, the more
complicated ones are in separate patches.
gdb/ChangeLog:
* i386-linux-nat.c (fetch_register, store_register,
i386_linux_fetch_inferior_registers,
i386_linux_store_inferior_registers): Use ptid from regcache.
* ia64-linux-nat.c (ia64_linux_fetch_register,
ia64_linux_store_register): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register,
inf_ptrace_store_register): Likewise.
* m32r-linux-nat.c (m32r_linux_fetch_inferior_registers,
m32r_linux_store_inferior_registers): Likewise.
* m68k-bsd-nat.c (m68kbsd_fetch_inferior_registers,
m68kbsd_store_inferior_registers): Likewise.
* m68k-linux-nat.c (fetch_register, store_register,
m68k_linux_fetch_inferior_registers,
m68k_linux_store_inferior_registers): Likewise.
* m88k-bsd-nat.c (m88kbsd_fetch_inferior_registers,
m88kbsd_store_inferior_registers): Likewise.
* mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers,
mips_fbsd_store_inferior_registers): Likewise.
* mips-linux-nat.c (mips64_linux_regsets_fetch_registers,
mips64_linux_regsets_store_registers): Likewise.
* mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers,
mipsnbsd_store_inferior_registers): Likewise.
* mips-obsd-nat.c (mips64obsd_fetch_inferior_registers,
mips64obsd_store_inferior_registers): Likewise.
* nto-procfs.c (procfs_fetch_registers, procfs_store_registers):
Likewise.
* ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers,
ppcfbsd_store_inferior_registers): Likewise.
* ppc-linux-nat.c (ppc_linux_fetch_inferior_registers,
ppc_linux_store_inferior_registers): Likewise.
* ppc-nbsd-nat.c (ppcnbsd_fetch_inferior_registers,
ppcnbsd_store_inferior_registers): Likewise.
* ppc-obsd-nat.c (ppcobsd_fetch_registers,
ppcobsd_store_registers): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers):
Likewise.
* ravenscar-thread.c (ravenscar_fetch_registers,
ravenscar_store_registers, ravenscar_prepare_to_store):
Likewise.
* record-btrace.c (record_btrace_fetch_registers,
record_btrace_store_registers, record_btrace_prepare_to_store):
Likewise.
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
Lookup inferior using ptid from regcache, instead of
current_inferior.
* remote.c (remote_fetch_registers, remote_store_registers): Use
ptid from regcache.
* rs6000-nat.c (fetch_register, store_register): Likewise.
* s390-linux-nat.c (s390_linux_fetch_inferior_registers,
s390_linux_store_inferior_registers): Likewise.
* sh-nbsd-nat.c (shnbsd_fetch_inferior_registers,
shnbsd_store_inferior_registers): Likewise.
* sol-thread.c (sol_thread_fetch_registers,
sol_thread_store_registers): Likewise.
* sparc-nat.c (sparc_fetch_inferior_registers,
sparc_store_inferior_registers): Likewise.
* tilegx-linux-nat.c (fetch_inferior_registers,
store_inferior_registers): Likewise.
* vax-bsd-nat.c (vaxbsd_fetch_inferior_registers,
vaxbsd_store_inferior_registers): Likewise.
* xtensa-linux-nat.c (fetch_gregs, store_gregs, fetch_xtregs,
store_xtregs): Likewise.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
[...]
.../gdb/s390-linux-nat.c: In function 'void s390_prepare_to_resume(lwp_info*)':
.../gdb/s390-linux-nat.c:703:20: error: 'min' is not a member of 'std'
watch_lo_addr = std::min (watch_lo_addr, area->lo_addr);
[...]
gdb/ChangeLog:
2016-09-18 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c: Include <algorithm>.
|
|
Otherwise including <string> or some other C++ header is broken.
E.g.:
In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0,
from /opt/gcc/include/c++/7.0.0/string:40,
from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68:
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
max(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
In file included from .../src/gdb/infrun.c:21:0:
To the best of my grepping abilities, I believe I adjusted all min/max
calls.
gdb/ChangeLog:
2016-09-16 Pedro Alves <palves@redhat.com>
* defs.h (min, max): Delete.
* aarch64-tdep.c: Include <algorithm> and use std::min and
std::max throughout.
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* ctf.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* environ.c: Likewise.
* exec.c: Likewise.
* f-exp.y: Likewise.
* findcmd.c: Likewise.
* ft32-tdep.c: Likewise.
* gcore.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* linux-thread-db.c: Likewise.
* lm32-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* memrange.c: Likewise.
* minidebug.c: Likewise.
* mips-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* nds32-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* parse.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* probe.c: Likewise.
* record-btrace.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-linux-tdep.c: Likewise.
* ser-tcp.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* source.c: Likewise.
* sparc-tdep.c: Likewise.
* symfile.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* xtensa-tdep.c: Likewise.
* cli/cli-cmds.c: Likewise.
* compile/compile-object-load.c: Likewise.
|
|
Add hardware breakpoint support for S390 targets.
gdb/ChangeLog:
* s390-linux-nat.c (PER_BIT, PER_EVENT_BRANCH, PER_EVENT_IFETCH)
(PER_EVENT_STORE, PER_EVENT_NULLIFICATION)
(PER_CONTROL_BRANCH_ADDRESS, PER_CONTROL_SUSPENSION)
(PER_CONTROL_ALTERATION): New macros.
(struct s390_debug_reg_state) <break_areas>: New member.
(s390_forget_process): Free break_areas as well.
(s390_linux_new_fork): Copy break_areas as well.
(s390_prepare_to_resume): Install hardware breakpoints.
(s390_can_use_hw_breakpoint): Indicate support for hardware
breakpoints.
(s390_insert_hw_breakpoint, s390_remove_hw_breakpoint): New
linux_nat target methods.
(_initialize_s390_nat): Register them.
gdb/testsuite/ChangeLog:
* lib/gdb.exp: No longer skip hardware breakpoint tests on s390.
|
|
Implement a new function for dumping the S390 "debug
registers" (actually, the PER info) and invoke it at appropriate places.
Respect the variable show_debug_regs and make it settable by the user.
gdb/ChangeLog:
* s390-linux-nat.c (gdbcmd.h): New include.
(s390_show_debug_regs): New function.
(s390_stopped_by_watchpoint): Call it, if show_debug_regs is set.
(s390_prepare_to_resume): Likewise.
(_initialize_s390_nat): Register the command "maint set
show-debug-regs".
|
|
Support different sets of watchpoints in multiple inferiors.
gdb/ChangeLog:
* s390-linux-nat.c (watch_areas): Remove variable. Replace by a
member of...
(struct s390_debug_reg_state): ...this. New struct.
(struct s390_process_info): New struct.
(s390_process_list): New variable.
(s390_find_process_pid, s390_add_process, s390_process_info_get)
(s390_get_debug_reg_state): New functions.
(s390_stopped_by_watchpoint): Now access the watch_areas VEC via
s390_get_debug_reg_state.
(s390_prepare_to_resume): Likewise.
(s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
(s390_forget_process, s390_linux_new_fork): New linux_nat target
methods.
(_initialize_s390_nat): Register them.
|
|
For S390, the list of active watchpoints is maintained in a list based
at "watch_base". This refactors the list to a vector "watch_areas".
gdb/ChangeLog:
* s390-linux-nat.c (s390_watch_area): New typedef. Define a VEC.
(watch_base): Remove variable.
(watch_areas): New variable.
(s390_stopped_by_watchpoint): Transform operations on the
watch_base list to equivalent operations on the watch_areas VEC.
(s390_prepare_to_resume): Likewise.
(s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
|
|
When using the lwp_info structure, avoid accessing its members directly,
and use the advertised function interfaces instead. This is according
to the instructions in linux-nat.h and prepares for making some of the
code common between gdb and gdbserver.
gdb/ChangeLog:
* s390-linux-nat.c (s390_prepare_to_resume): Use advertised lwp
functions instead of accessing lwp_info structure members.
(s390_mark_per_info_changed): New function.
(s390_new_thread): Use it.
(s390_refresh_per_info_cb): New function.
(s390_refresh_per_info): Remove parameter. Refresh all lwps of
the current process.
(s390_insert_watchpoint): Adjust call to s390_refresh_per_info.
(s390_remove_watchpoint): Likewise.
|
|
Now that gdb/gdbserver compile as C++ programs by default, the s390
GNU/Linux build started failing with:
In file included from ../../src/gdb/common/common-defs.h:64:0,
from ../../src/gdb/defs.h:28,
from ../../src/gdb/s390-linux-nat.c:22:
../../src/gdb/s390-linux-nat.c: In function ‘void fetch_regset(regcache*, int, int, int, const regset*)’:
../../src/gdb/../include/libiberty.h:711:38: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
# define alloca(x) __builtin_alloca(x)
^
../../src/gdb/s390-linux-nat.c:297:19: note: in expansion of macro ‘alloca’
gdb_byte *buf = alloca (regsize);
^
etc.
gdb/ChangeLog:
2016-04-21 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
void * instead of gdb_byte *.
gdb/gdbserver/ChangeLog:
2016-04-21 Pedro Alves <palves@redhat.com>
* linux-s390-low.c (s390_collect_ptrace_register)
(s390_supply_ptrace_register, s390_get_hwcap): Use gdb_byte * and
add casts.
(s390_check_regset): Use void * instead of gdb_byte *.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is
to change some calls to the xmalloc family of functions to calls to the
equivalents in the XNEW family. This avoids adding an explicit cast, so
it keeps the code a bit more readable. Some of them also map relatively
well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be
possible to do scripted replacements if needed.
I only changed calls that were obviously allocating memory for one or
multiple "objects". Allocation of variable sizes (such as strings or
buffer handling) will be for later (and won't use XNEW).
- xmalloc (sizeof (struct foo)) -> XNEW (struct foo)
- xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num)
- xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo)
- xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num)
- xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num)
- obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo)
- obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num)
- alloca (sizeof (struct foo)) -> XALLOCA (struct foo)
- alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num)
Some instances of xmalloc followed by memset to zero the buffer were
replaced by XCNEW or XCNEWVEC.
I regtested on x86-64, Ubuntu 14.04, but the patch touches many
architecture-specific files. For those I'll have to rely on the
buildbot or people complaining that I broke their gdb.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_add_process): Likewise.
* aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
* ada-exp.y (write_ambiguous_var): Likewise.
* ada-lang.c (resolve_subexp): Likewise.
(user_select_syms): Likewise.
(assign_aggregate): Likewise.
(ada_evaluate_subexp): Likewise.
(cache_symbol): Likewise.
* addrmap.c (allocate_key): Likewise.
(addrmap_create_mutable): Likewise.
* aix-thread.c (sync_threadlists): Likewise.
* alpha-tdep.c (alpha_push_dummy_call): Likewise.
(alpha_gdbarch_init): Likewise.
* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
* arm-linux-nat.c (arm_linux_add_process): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* arm-tdep.c (push_stack_item): Likewise.
(arm_displaced_step_copy_insn): Likewise.
(arm_gdbarch_init): Likewise.
(_initialize_arm_tdep): Likewise.
* avr-tdep.c (push_stack_item): Likewise.
* ax-general.c (new_agent_expr): Likewise.
* block.c (block_initialize_namespace): Likewise.
* breakpoint.c (alloc_counted_command_line): Likewise.
(update_dprintf_command_list): Likewise.
(parse_breakpoint_sals): Likewise.
(decode_static_tracepoint_spec): Likewise.
(until_break_command): Likewise.
(clear_command): Likewise.
(update_global_location_list): Likewise.
(get_breakpoint_objfile_data) Likewise.
* btrace.c (ftrace_new_function): Likewise.
(btrace_set_insn_history): Likewise.
(btrace_set_call_history): Likewise.
* buildsym.c (add_symbol_to_list): Likewise.
(record_pending_block): Likewise.
(start_subfile): Likewise.
(start_buildsym_compunit): Likewise.
(push_subfile): Likewise.
(end_symtab_get_static_block): Likewise.
(buildsym_init): Likewise.
* cli/cli-cmds.c (source_command): Likewise.
* cli/cli-decode.c (add_cmd): Likewise.
* cli/cli-script.c (build_command_line): Likewise.
(setup_user_args): Likewise.
(realloc_body_list): Likewise.
(process_next_line): Likewise.
(copy_command_lines): Likewise.
* cli/cli-setshow.c (do_set_command): Likewise.
* coff-pe-read.c (read_pe_exported_syms): Likewise.
* coffread.c (coff_locate_sections): Likewise.
(coff_symtab_read): Likewise.
(coff_read_struct_type): Likewise.
* common/cleanups.c (make_my_cleanup2): Likewise.
* common/common-exceptions.c (throw_it): Likewise.
* common/filestuff.c (make_cleanup_close): Likewise.
* common/format.c (parse_format_string): Likewise.
* common/queue.h (DEFINE_QUEUE_P): Likewise.
* compile/compile-object-load.c (munmap_list_add): Likewise.
(compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (append_args): Likewise.
* corefile.c (specify_exec_file_hook): Likewise.
* cp-support.c (make_symbol_overload_list): Likewise.
* cris-tdep.c (push_stack_item): Likewise.
(cris_gdbarch_init): Likewise.
* ctf.c (ctf_trace_file_writer_new): Likewise.
* dbxread.c (init_header_files): Likewise.
(add_new_header_file): Likewise.
(init_bincl_list): Likewise.
(dbx_end_psymtab): Likewise.
(start_psymtab): Likewise.
(dbx_end_psymtab): Likewise.
* dcache.c (dcache_init): Likewise.
* dictionary.c (dict_create_hashed): Likewise.
(dict_create_hashed_expandable): Likewise.
(dict_create_linear): Likewise.
(dict_create_linear_expandable): Likewise.
* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
* dummy-frame.c (register_dummy_frame_dtor): Likewise.
* dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
* dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
(decode_frame_entry_1): Likewise.
* dwarf2expr.c (new_dwarf_expr_context): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
* dwarf2read.c (dwarf2_has_info): Likewise.
(create_signatured_type_table_from_index): Likewise.
(dwarf2_read_index): Likewise.
(dw2_get_file_names_reader): Likewise.
(create_all_type_units): Likewise.
(read_cutu_die_from_dwo): Likewise.
(init_tu_and_read_dwo_dies): Likewise.
(init_cutu_and_read_dies): Likewise.
(create_all_comp_units): Likewise.
(queue_comp_unit): Likewise.
(inherit_abstract_dies): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_add_field): Likewise.
(dwarf2_add_typedef): Likewise.
(dwarf2_add_member_fn): Likewise.
(attr_to_dynamic_prop): Likewise.
(abbrev_table_alloc_abbrev): Likewise.
(abbrev_table_read_table): Likewise.
(add_include_dir): Likewise.
(add_file_name): Likewise.
(dwarf_decode_line_header): Likewise.
(dwarf2_const_value_attr): Likewise.
(dwarf_alloc_block): Likewise.
(parse_macro_definition): Likewise.
(set_die_type): Likewise.
(write_psymtabs_to_index): Likewise.
(create_cus_from_index): Likewise.
(dwarf2_create_include_psymtab): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(build_type_psymtab_dependencies): Likewise.
(read_comp_units_from_section): Likewise.
(compute_compunit_symtab_includes): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(read_func_scope): Likewise.
(process_structure_scope): Likewise.
(mark_common_block_symbol_computed): Likewise.
(load_partial_dies): Likewise.
(dwarf2_symbol_mark_computed): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_read_minimal_symbols): Likewise.
* environ.c (make_environ): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* event-loop.c (create_file_handler): Likewise.
(create_async_signal_handler): Likewise.
(create_async_event_handler): Likewise.
(create_timer): Likewise.
* exec.c (build_section_table): Likewise.
* fbsd-nat.c (fbsd_remember_child): Likewise.
* fork-child.c (fork_inferior): Likewise.
* frv-tdep.c (new_variant): Likewise.
* gdbarch.sh (gdbarch_alloc): Likewise.
(append_name): Likewise.
* gdbtypes.c (rank_function): Likewise.
(copy_type_recursive): Likewise.
(add_dyn_prop): Likewise.
* gnu-nat.c (make_proc): Likewise.
(make_inf): Likewise.
(gnu_write_inferior): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
(build_std_type_info_type): Likewise.
* guile/scm-param.c (compute_enum_list): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* guile/scm-value.c (gdbscm_value_call): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
(read_unwind_info): Likewise.
* ia64-tdep.c (ia64_gdbarch_init): Likewise.
* infcall.c (dummy_frame_context_saver_setup): Likewise.
(call_function_by_hand_dummy): Likewise.
* infcmd.c (step_once): Likewise.
(finish_forward): Likewise.
(attach_command): Likewise.
(notice_new_inferior): Likewise.
* inferior.c (add_inferior_silent): Likewise.
* infrun.c (add_displaced_stepping_state): Likewise.
(save_infcall_control_state): Likewise.
(save_inferior_ptid): Likewise.
(_initialize_infrun): Likewise.
* jit.c (bfd_open_from_target_memory): Likewise.
(jit_gdbarch_data_init): Likewise.
* language.c (add_language): Likewise.
* linespec.c (decode_line_2): Likewise.
* linux-nat.c (add_to_pid_list): Likewise.
(add_initial_lwp): Likewise.
* linux-thread-db.c (add_thread_db_info): Likewise.
(record_thread): Likewise.
(info_auto_load_libthread_db): Likewise.
* m32c-tdep.c (m32c_gdbarch_init): Likewise.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* m88k-tdep.c (m88k_analyze_prologue): Likewise.
* macrocmd.c (macro_define_command): Likewise.
* macroexp.c (gather_arguments): Likewise.
* macroscope.c (sal_macro_scope): Likewise.
* macrotab.c (new_macro_table): Likewise.
* mdebugread.c (push_parse_stack): Likewise.
(parse_partial_symbols): Likewise.
(parse_symbol): Likewise.
(psymtab_to_symtab_1): Likewise.
(new_block): Likewise.
(new_psymtab): Likewise.
(mdebug_build_psymtabs): Likewise.
(add_pending): Likewise.
(elfmdebug_build_psymtabs): Likewise.
* mep-tdep.c (mep_gdbarch_init): Likewise.
* mi/mi-main.c (mi_execute_command): Likewise.
* mi/mi-parse.c (mi_parse_argv): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (terminate_minimal_symbol_table): Likewise.
* mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
* msp430-tdep.c (msp430_gdbarch_init): Likewise.
* mt-tdep.c (mt_registers_info): Likewise.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
* nat/linux-btrace.c (linux_enable_bts): Likewise.
(linux_enable_pt): Likewise.
* nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
(linux_xfer_osdata_processgroups): Likewise.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* nto-procfs.c (procfs_meminfo): Likewise.
* objc-lang.c (start_msglist): Likewise.
(selectors_info): Likewise.
(classes_info): Likewise.
(find_methods): Likewise.
* objfiles.c (allocate_objfile): Likewise.
(update_section_map): Likewise.
* osabi.c (gdbarch_register_osabi): Likewise.
(gdbarch_register_osabi_sniffer): Likewise.
* parse.c (start_arglist): Likewise.
* ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
(hwdebug_insert_point): Likewise.
* printcmd.c (display_command): Likewise.
(ui_printf): Likewise.
* procfs.c (create_procinfo): Likewise.
(load_syscalls): Likewise.
(proc_get_LDT_entry): Likewise.
(proc_update_threads): Likewise.
* prologue-value.c (make_pv_area): Likewise.
(pv_area_store): Likewise.
* psymtab.c (extend_psymbol_list): Likewise.
(init_psymbol_list): Likewise.
(allocate_psymtab): Likewise.
* python/py-inferior.c (add_thread_object): Likewise.
* python/py-param.c (compute_enum_values): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/py-varobj.c (py_varobj_iter_next): Likewise.
* python/python.c (ensure_python_env): Likewise.
* record-btrace.c (record_btrace_start_replaying): Likewise.
* record-full.c (record_full_reg_alloc): Likewise.
(record_full_mem_alloc): Likewise.
(record_full_end_alloc): Likewise.
(record_full_core_xfer_partial): Likewise.
* regcache.c (get_thread_arch_aspace_regcache): Likewise.
* remote-fileio.c (remote_fileio_init_fd_map): Likewise.
* remote-notif.c (remote_notif_state_allocate): Likewise.
* remote.c (demand_private_info): Likewise.
(remote_notif_stop_alloc_reply): Likewise.
(remote_enable_btrace): Likewise.
* reverse.c (save_bookmark_command): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
* rx-tdep.c (rx_gdbarch_init): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
* ser-go32.c (dos_get_tty_state): Likewise.
(dos_copy_tty_state): Likewise.
* ser-mingw.c (ser_windows_open): Likewise.
(ser_console_wait_handle): Likewise.
(ser_console_get_tty_state): Likewise.
(make_pipe_state): Likewise.
(net_windows_open): Likewise.
* ser-unix.c (hardwire_get_tty_state): Likewise.
(hardwire_copy_tty_state): Likewise.
* solib-aix.c (solib_aix_new_lm_info): Likewise.
* solib-dsbt.c (dsbt_current_sos): Likewise.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
(frv_relocate_main_executable): Likewise.
* solib-spu.c (spu_bfd_fopen): Likewise.
* solib-svr4.c (lm_info_read): Likewise.
(svr4_copy_library_list): Likewise.
(svr4_default_sos): Likewise.
* source.c (find_source_lines): Likewise.
(line_info): Likewise.
(add_substitute_path_rule): Likewise.
* spu-linux-nat.c (spu_bfd_open): Likewise.
* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
* stabsread.c (dbx_lookup_type): Likewise.
(read_type): Likewise.
(read_member_functions): Likewise.
(read_struct_fields): Likewise.
(read_baseclasses): Likewise.
(read_args): Likewise.
(_initialize_stabsread): Likewise.
* stack.c (func_command): Likewise.
* stap-probe.c (handle_stap_probe): Likewise.
* symfile.c (addrs_section_sort): Likewise.
(addr_info_make_relative): Likewise.
(load_section_callback): Likewise.
(add_symbol_file_command): Likewise.
(init_filename_language_table): Likewise.
* symtab.c (create_filename_seen_cache): Likewise.
(sort_search_symbols_remove_dups): Likewise.
(search_symbols): Likewise.
* target.c (make_cleanup_restore_target_terminal): Likewise.
* thread.c (new_thread): Likewise.
(enable_thread_stack_temporaries): Likewise.
(make_cleanup_restore_current_thread): Likewise.
(thread_apply_all_command): Likewise.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* top.c (gdb_readline_wrapper): Likewise.
* tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
* tracepoint.c (trace_find_line_command): Likewise.
(all_tracepoint_actions_and_cleanup): Likewise.
(make_cleanup_restore_current_traceframe): Likewise.
(get_uploaded_tp): Likewise.
(get_uploaded_tsv): Likewise.
* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
(tui_alloc_win_info): Likewise.
(tui_alloc_content): Likewise.
(tui_add_content_elements): Likewise.
* tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
(tui_set_disassem_content): Likewise.
* ui-file.c (ui_file_new): Likewise.
(stdio_file_new): Likewise.
(tee_file_new): Likewise.
* utils.c (make_cleanup_restore_integer): Likewise.
(add_internal_problem_command): Likewise.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* valops.c (find_oload_champ): Likewise.
* value.c (allocate_value_lazy): Likewise.
(record_latest_value): Likewise.
(create_internalvar): Likewise.
* varobj.c (install_variable): Likewise.
(new_variable): Likewise.
(new_root_variable): Likewise.
(cppush): Likewise.
(_initialize_varobj): Likewise.
* windows-nat.c (windows_make_so): Likewise.
* x86-nat.c (x86_add_process): Likewise.
* xcoffread.c (arrange_linetable): Likewise.
(allocate_include_entry): Likewise.
(process_linenos): Likewise.
(SYMBOL_DUP): Likewise.
(xcoff_start_psymtab): Likewise.
(xcoff_end_psymtab): Likewise.
* xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/gdbserver/ChangeLog:
* ax.c (gdb_parse_agent_expr): Likewise.
(compile_bytecodes): Likewise.
* dll.c (loaded_dll): Likewise.
* event-loop.c (append_callback_event): Likewise.
(create_file_handler): Likewise.
(create_file_event): Likewise.
* hostio.c (handle_open): Likewise.
* inferiors.c (add_thread): Likewise.
(add_process): Likewise.
* linux-aarch64-low.c (aarch64_linux_new_process): Likewise.
* linux-arm-low.c (arm_new_process): Likewise.
(arm_new_thread): Likewise.
* linux-low.c (add_to_pid_list): Likewise.
(linux_add_process): Likewise.
(handle_extended_wait): Likewise.
(add_lwp): Likewise.
(enqueue_one_deferred_signal): Likewise.
(enqueue_pending_signal): Likewise.
(linux_resume_one_lwp_throw): Likewise.
(linux_resume_one_thread): Likewise.
(linux_read_memory): Likewise.
(linux_write_memory): Likewise.
* linux-mips-low.c (mips_linux_new_process): Likewise.
(mips_linux_new_thread): Likewise.
(mips_add_watchpoint): Likewise.
* linux-x86-low.c (initialize_low_arch): Likewise.
* lynx-low.c (lynx_add_process): Likewise.
* mem-break.c (set_raw_breakpoint_at): Likewise.
(set_breakpoint): Likewise.
(add_condition_to_breakpoint): Likewise.
(add_commands_to_breakpoint): Likewise.
(clone_agent_expr): Likewise.
(clone_one_breakpoint): Likewise.
* regcache.c (new_register_cache): Likewise.
* remote-utils.c (look_up_one_symbol): Likewise.
* server.c (queue_stop_reply): Likewise.
(start_inferior): Likewise.
(queue_stop_reply_callback): Likewise.
(handle_target_event): Likewise.
* spu-low.c (fetch_ppc_memory): Likewise.
(store_ppc_memory): Likewise.
* target.c (set_target_ops): Likewise.
* thread-db.c (thread_db_load_search): Likewise.
(try_thread_db_load_1): Likewise.
* tracepoint.c (add_tracepoint): Likewise.
(add_tracepoint_action): Likewise.
(create_trace_state_variable): Likewise.
(cmd_qtdpsrc): Likewise.
(cmd_qtro): Likewise.
(add_while_stepping_state): Likewise.
* win32-low.c (child_add_thread): Likewise.
(get_image_name): Likewise.
|
|
This is a patch I extracted from Pedro's C++ branch. It contains the
most trivial enum fixes, where an integer type/value was used instead
of the appropriate enum type/value. It fixes many C++ errors, since
in C++ you can't mix integers and enums implicitely.
Regardless of the C++ conversion, I think this is a good cleanup to make
use of the appropriate enum types.
Regression-tested on native x86_64.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
type or value instead of integer.
(aarch64_linux_insert_watchpoint): Likewise.
(aarch64_linux_remove_watchpoint): Likewise.
* ada-lang.c (ada_op_print_tab): Likewise.
* amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
(amd64_linux_syscall_record_common): Likewise.
* arch-utils.c (target_byte_order_user): Likewise.
(default_byte_order): Likewise.
* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
(arm_linux_get_hwbp_type): Likewise.
(arm_linux_hw_watchpoint_initialize): Likewise.
(arm_linux_insert_watchpoint): Likewise.
* arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
(arm_linux_syscall_record): Likewise.
* breakpoint.c (update_watchpoint): Likewise.
(breakpoint_here_p): Likewise.
(bpstat_print): Likewise.
(enable_breakpoint_disp): Likewise.
* c-lang.c (c_op_print_tab): Likewise.
* cli/cli-decode.c (add_info_alias): Likewise.
* d-lang.c (d_op_print_tab): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* f-exp.y (dot_ops): Likewise.
(f77_keywords): Likewise.
* f-lang.c (f_op_print_tab): Likewise.
* go-lang.c (go_op_print_tab): Likewise.
* guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
* guile/scm-cmd.c (gdbscm_make_command): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
* guile/scm-string.c (struct scm_to_stringn_data): Likewise.
(struct scm_from_stringn_data): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_remove_watchpoint): Likewise.
(ia64_linux_can_use_hw_breakpoint): Likewise.
* infrun.c (print_stop_event): Likewise.
* jv-lang.c (java_op_print_tab): Likewise.
* linux-nat.c (linux_proc_xfer_partial): Likewise.
* linux-nat.h (struct lwp_info): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* m2-lang.c (m2_op_print_tab): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_variables): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* mi/mi-out.c (mi_table_begin): Likewise.
(mi_table_header): Likewise.
* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
(mips_linux_insert_watchpoint): Likewise.
(mips_linux_remove_watchpoint): Likewise.
* nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
* nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
(mips_linux_watch_type_to_irw): Likewise.
* nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_hw_watchpoint): Likewise.
(procfs_can_use_hw_breakpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
* p-lang.c (pascal_op_print_tab): Likewise.
* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
* ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
* procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_watchpoint): Likewise.
(procfs_remove_watchpoint): Likewise.
* psymtab.c (recursively_search_psymtabs): Likewise.
* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
(m32r_insert_watchpoint): Likewise.
* remote-mips.c (mips_can_use_watchpoint): Likewise.
(mips_insert_watchpoint): Likewise.
(mips_remove_watchpoint): Likewise.
* remote.c (watchpoint_to_Z_packet): Likewise.
(remote_insert_watchpoint): Likewise.
(remote_remove_watchpoint): Likewise.
(remote_check_watch_resources): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
(s390_can_use_hw_breakpoint): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
* target.h (struct target_ops): Likewise.
* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
* ui-out.c (struct ui_out_hdr): Likewise.
(append_header_to_list): Likewise.
(get_next_header): Likewise.
(verify_field): Likewise.
(ui_out_begin): Likewise.
(ui_out_field_int): Likewise.
(ui_out_field_fmt_int): Likewise.
(ui_out_field_skip): Likewise.
(ui_out_field_string): Likewise.
(ui_out_field_fmt): Likewise.
* varobj.c (new_variable): Likewise.
* x86-nat.c (x86_insert_watchpoint): Likewise.
(x86_remove_watchpoint): Likewise.
(x86_can_use_hw_breakpoint): Likewise.
* xtensa-tdep.h (struct gdbarch_tdep): Likewise.
* inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
previously anonymous enumeration type..
* linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
value.
* target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
(target_debug_print_enum_bptype): New.
* target-delegates.c: Regenerate.
|
|
The buildbot noticed that the enum __ptrace_request series broke the
s390 GNU/Linux build:
../../binutils-gdb/gdb/s390-linux-nat.c: In function 'fetch_regs':
../../binutils-gdb/gdb/s390-linux-nat.c:226:54: error: macro "ptrace" requires 4 arguments, but only 3 given
if (ptrace (PTRACE_PEEKUSR_AREA, tid, (long) &parea) < 0)
^
../../binutils-gdb/gdb/s390-linux-nat.c: In function 'store_regs':
../../binutils-gdb/gdb/s390-linux-nat.c:243:54: error: macro "ptrace" requires 4 arguments, but only 3 given
if (ptrace (PTRACE_PEEKUSR_AREA, tid, (long) &parea) < 0)
^
Fix this the same way it's handled everywhere else -- just pass 0 as
forth argument, which also handles non-varargs ptrace prototypes in
non-glibc libcs, e.g., Bionic (if it ever gets a s390 port...).
gdb/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c (fetch_regs, store_regs, fetch_fpregs)
(s390_stopped_by_watchpoint, s390_prepare_to_resume): Pass 0 as
forth argument to ptrace PTRACE_PEEKUSR_AREA/PTRACE_POKEUSR_AREA.
|
|
So that we pick the enum __ptrace_request fix everywhere.
gdb/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of
sys/ptrace.h.
* alpha-linux-nat.c: Likewise.
* amd64-linux-nat.c: Likewise.
* arm-linux-nat.c: Likewise.
* hppa-linux-nat.c: Likewise.
* i386-linux-nat.c: Likewise.
* ia64-linux-nat.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m68klinux-nat.c: Likewise.
* mips-linux-nat.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-ptrace.h
* nat/mips-linux-watch.c: Likewise.
* nat/x86-linux-dregs.c: Likewise.
* ppc-linux-nat.c: Likewise.
* s390-linux-nat.c: Likewise.
* spu-linux-nat.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* x86-linux-nat.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.c: Likewise.om>
* linux-aarch64-low.c: Include nat/gdb_ptrace.h instead of
sys/ptrace.h.
* linux-arm-low.c: Likewise.
* linux-cris-low.c: Likewise.
* linux-crisv32-low.c: Likewise.
* linux-low.c: Likewise.
* linux-m68k-low.c: Likewise.
* linux-mips-low.c: Likewise.
* linux-nios2-low.c: Likewise.
* linux-s390-low.c: Likewise.
* linux-sparc-low.c: Likewise.
* linux-tic6x-low.c: Likewise.
* linux-tile-low.c: Likewise.
* linux-x86-low.c: Likewise.
|
|
Macros PTRACE_GETREGSET and PTRACE_SETREGSET are defined locally in
some places in GDB and GDBserver. This patch is to move them to
nat/linux-ptrace.h to avoid duplication.
gdb:
2015-06-01 Yao Qi <yao.qi@linaro.org>
* amd64-linux-nat.c: Include "nat/linux-ptrace.h".
* i386-linux-nat.c: Likewise.
* nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
* s390-linux-nat.c: Include "nat/linux-ptrace.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
* x86-linux-nat.c: Include "nat/linux-ptrace.h".
* x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
gdb/gdbserver:
2015-06-01 Yao Qi <yao.qi@linaro.org>
* linux-s390-low.c (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
* linux-x86-low.c: Likewise.
|
|
On 64-bit S390 platforms, for programs compiled with -m31, it could
happen that GDB inadvertently cleared the inferior's 31-bit addressing
mode bit and left the inferior running in 24-bit addressing mode. In
particular this occurred with checkpoint.exp, when the "restore"
command needed to create a new regcache copy: At the time when the
PSWM register was copied over, the addressing mode bit was taken from
the PSWA register, which was still zero since it had not been copied
yet. And when the PSWA register was copied, the addressing mode was
not updated again.
The fix affects fill_gregset, where the bits "belonging" to each of
the PSWA and PSWM registers are now carefully separated. The
addressing mode bit is no longer touched when writing PSWM, and --
more importantly -- it *is* written when writing PSWA.
gdb/ChangeLog:
* s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
register in the regcache when treating the PSWM register, and vice
versa.
|
|
For multi-threaded inferiors on S390 GNU/Linux targets, GDB tried to
update the PER info via ptrace() in a newly attached thread before
assuring that the thread is stopped. Depending on the timing, this
could lead to a GDB internal error. The patch defers the PER info
update until just before resuming the thread.
gdb/ChangeLog:
* s390-linux-nat.c (struct arch_lwp_info): New.
(s390_fix_watch_points): Rename to...
(s390_prepare_to_resume): ...this. Skip the PER info update
unless the watch points have changed.
(s390_refresh_per_info, s390_new_thread): New functions.
(s390_insert_watchpoint): Call s390_refresh_per_info instead of
s390_fix_watch_points.
(s390_remove_watchpoint): Likewise.
(_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
Register s390_prepare_to_resume.
|
|
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
Rather than supplying own supply/collect functions, use the generic
functions regcache_supply_regset and regcache_collect_regset instead.
The register maps are rewritten accordingly and become much shorter
(and better readable) than before.
|
|
This fixes a bug that leads to various failures when debugging a
31-bit inferior with a 64-bit gdb on s390x.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Add argument.
(target_region_ok_for_hw_watchpoint): Add argument.
* target.c (debug_to_region_ok_for_hw_watchpoint): Add argument.
(default_region_ok_for_hw_watchpoint): Add argument.
* spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Add argument.
* s390-linux-nat.c (s390_region_ok_for_hw_watchpoint): Add 'self'
argument.
* remote.c (remote_region_ok_for_hw_watchpoint): Add 'self'
argument.
* procfs.c (procfs_region_ok_for_hw_watchpoint): Add 'self'
argument.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Add
'self' argument.
* mips-linux-nat.c (mips_linux_region_ok_for_hw_watchpoint): Add
'self' argument.
* inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): Add
'self' argument.
* i386-nat.c (i386_region_ok_for_watchpoint): Add 'self' argument.
* arm-linux-nat.c (arm_linux_region_ok_for_hw_watchpoint): Add
'self' argument.
* aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint):
Add 'self' argument.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_insert_watchpoint>: Add
argument.
(target_insert_watchpoint): Add argument.
* target.c (debug_to_insert_watchpoint): Add argument.
(update_current_target): Update.
* s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument.
* remote.c (remote_insert_watchpoint): Add 'self' argument.
* remote-mips.c (mips_insert_watchpoint): Add 'self' argument.
* remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument.
* procfs.c (procfs_insert_watchpoint): Add 'self' argument.
* ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self'
argument.
* nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument.
(procfs_insert_hw_watchpoint): Add 'self' argument.
* mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self'
argument.
* inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self'
argument.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self'
argument.
* i386-nat.c (i386_insert_watchpoint): Add 'self' argument.
* arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self'
argument.
* aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add
'self' argument.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_remove_watchpoint>: Add
argument.
(target_remove_watchpoint): Add argument.
* target.c (debug_to_remove_watchpoint): Add argument.
(update_current_target): Update.
* s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument.
* remote.c (remote_remove_watchpoint): Add 'self' argument.
* remote-mips.c (mips_remove_watchpoint): Add 'self' argument.
* remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument.
* procfs.c (procfs_remove_watchpoint): Add 'self' argument.
* ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self'
argument.
* nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument.
* mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self'
argument.
* inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self'
argument.
* ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self'
argument.
* i386-nat.c (i386_remove_watchpoint): Add 'self' argument.
* arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self'
argument.
* aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add
'self' argument.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_can_use_hw_breakpoint>: Add
argument.
(target_can_use_hardware_watchpoint): Add argument.
* target.c (debug_to_can_use_hw_breakpoint): Add argument.
(update_current_target): Update.
* spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self'
argument.
* s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self'
argument.
* remote.c (remote_check_watch_resources): Add 'self' argument.
* remote-mips.c (mips_can_use_watchpoint): Add 'self' argument.
* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self'
argument.
* procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument.
* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self'
argument.
* nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self'
argument.
* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self'
argument.
* inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self'
argument.
* ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self'
argument.
* ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self'
argument.
* i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument.
* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self'
argument.
* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add
'self' argument.
|
|
A subsequent pass introduces delegation helper functions to the target
API. This delegation is much cleaner if the target_ops pointer is
directly available at delegation time.
This patch adds the "this" pointer to various to_* methods for this
purpose.
This updates a number of ports which I am unable to test. Please give
them a look-over. Any possible problem here is trivial, though, as
all that is required is adding an argument to a function.
2014-02-19 Tom Tromey <tromey@redhat.com>
* aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint):
Add 'ops' argument.
* arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add
'ops' argument.
* i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument.
* ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add
'ops' argument.
* inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops'
argument.
* linux-nat.c (save_sigtrap): Update.
(linux_nat_stopped_by_watchpoint, linux_nat_is_async_p)
(linux_nat_can_async_p, linux_nat_async): Add 'ops' argument.
(linux_nat_close): Update.
* mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops'
argument.
* ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops'
argument.
* procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument.
* record-full.c (record_full_beneath_to_stopped_by_watchpoint)
(record_full_beneath_to_async, tmp_to_stopped_by_watchpoint)
(tmp_to_async): Add 'ops' argument.
(record_full_stopped_by_watchpoint, record_full_async)
(record_full_can_async_p, record_full_is_async_p): Add 'ops'
argument.
* remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint)
(m32r_stopped_by_watchpoint): Add 'ops' argument.
* remote-mips.c (mips_stopped_by_watchpoint): Add 'ops' argument.
* remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p)
(remote_is_async_p, remote_async): Add 'ops' argument.
(remote_stopped_data_address): Update.
* s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument.
* target.c (update_current_target)
(find_default_can_async_p, find_default_is_async_p): Update.
(init_dummy_target): Update.
(debug_to_stopped_by_watchpoint): Add 'ops' argument.
* target.h (struct target_ops) <to_stopped_by_watchpoint,
to_can_async_p, to_is_async_p, to_async>: Add 'ops' argument.
(target_can_async_p, target_is_async_p, target_async)
(target_stopped_by_watchpoint): Update.
|
|
|
|
When checking for the presence of the TDB regset, the current code
interprets ENODATA from PTRACE_GETREGSET as an indication that the TDB
regset *could* occur on this system, but the inferior stopped outside
a transaction. However, the Linux kernel actually reports ENODATA
even on systems without the transactional execution facility. Thus
the logic is now changed to check the TE field in the HWCAP as well.
This version also checks the existence of the TDB regset -- just to be
on the safe side when running on TE-enabled hardware with a kernel
that does not offer the TDB regset for some reason.
gdb/
* s390-linux-nat.c (s390_read_description): Consider the TE field
in the HWCAP for determining 'have_regset_tdb'.
gdbserver/
* linux-s390-low.c (HWCAP_S390_TE): New define.
(s390_arch_setup): Consider the TE field in the HWCAP for
determining 'have_regset_tdb'.
|
|
As suggested before, rename the S/390-related source files (tdep and nat)
such that "-linux-" occurs in the file name, like with other GNU/Linux
targets. Since no other operating system is currently supported by GDB
on this architecture, this isn't strictly necessary. But the old names
sometimes caused GDB contributors to miss these files when performing a
change that affects all GNU/Linux targets. The latest such incident was
observed here:
https://sourceware.org/ml/gdb-patches/2013-09/msg00619.html
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-tdep.h: Rename to...
* s390-linux-tdep.h: ...here.
* s390-tdep.c: Rename to...
* s390-linux-tdep.c: ...here. Adjust #include.
* s390-nat.c: Rename to...
* s390-linux-nat.c: ...here. Adjust #include.
* config/s390/s390.mh: Rename to...
* config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
s390-linux-nat.o.
* configure.host: Reflect host rename "s390" -> "linux".
* configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
* Makefile.in (ALL_TARGET_OBS): Likewise.
(HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
s390-linux-tdep.h.
(ALLDEPFILES): Reflect rename of .c files.
|
