| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
* lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error
messages. Add rs6000 support. Don't try to modify unwritable
registers.
* rs6000-nat.c: Move lots of native dependent stuff (like core
file support) from rs6000-tdep.c & xcoffexec.c to here.
* rs6000-tdep.c: Move native dependent stuff to nat.c.
* xcoffexec.c: Move native dependent stuff to nat.c.
* config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here
from tm file.
* config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're
really native.
* config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
New files to support Lynx/rs6000.
|
|
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
|
|
* rs6000-tdep.c: Add comment about framelessness.
|
|
|
|
|
|
({extract,store}_{signed_integer,unsigned_integer,address}):
New routines to replace SWAP_TARGET_AND_HOST.
All over: All uses of SWAP_TARGET_AND_HOST on integers replaced.
|
|
|
|
* frame.h (struct frame_info): Doc fix for next_frame.
New field signal_handler_caller.
blockframe.c (create_new_frame, get_prev_frame_info),
config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO): Set it (needs
INIT_FRAME_PC_FIRST).
stack.c (print_frame_info), rs6000-tdep.c (rs6000_frame_chain):
Check it.
|
|
to rs6000_frame_chain and deal with it if we're in a signal handler.
(FRAME_SAVED_PC): Use rs6000_frame_chain.
|
|
about framlessness except on the innermost frame.
|
|
* command.c (do_setshow_command): Use %u with var_{u,z}integer.
* command.{c,h}: New var_type var_integer.
main.c: Use it for history_size.
* rs6000-tdep.c, xcoffexec.c, config/rs6000/xm-rs6000.h, breakpoint.c:
Lint and byte-order fixups.
|
|
don't use sizeof(int) for target stuff, etc).
|
|
objfiles.h (struct objfiles): Add section_offsets, num_sections.
symfile.c (syms_from_objfile), xcoffread.c (xcoff_symfile_offsets):
Set them.
symtab.h (struct general_symbol_info): Add section field.
minsyms.c (prim_record_minimal_symbol{,_and_info}): Set it.
xcoffread.c: Set section for symbols and msymbols.
(struct symtab): Add block_line_section field.
buildsym.c (end_symtab): Set it.
(end_symtab and callers): Add section parameter.
objfiles.c (objfile_relocate): New funciton.
xcoffexec.c (vmap_symtab): Use it.
xcoffsolib.h (struct vmap): Remove unused fields.
config/rs6000/tm-rs6000.h, stack.c, xcoffexec.c: Remove
CORE_NEEDS_RELOCATION, symtab_relocated.
config/rs6000/tm-rs6000.h: Remove use of loadinfotext.
rs6000-tdep.c: Make loadinfotext static.
breakpoint.c (fixup_breakpoints): Doc fix.
symtab.h (struct symtab), config/rs6000/tm-rs6000.h, buildsym.c
(end_symtab): primary field replaces nonreloc.
|
|
* xcoffread.c (retrieve_tracebackinfo): Move assignment out
of while condition.
* xcoffread.c (enter_line_range): complain() on bad endoffset.
xcoffread.c: Doc fixes.
Tue Mar 9 09:56:12 1993 Jim Kingdon (kingdon@cygnus.com)
* tm-rs6000.h (CORE_NEEDS_RELOCATION): Just call xcoff_relocate_core.
xcoffexec.c (xcoff_relocate_core): New function.
(text_adjustment): Removed.
(add_vmap): Return the vmap.
rs6000-tdep.c (add_text_to_loadinfo): No longer static.
Fri Mar 5 05:22:46 1993 Jim Kingdon (kingdon@cygnus.com)
* xcoffsolib.h: Add objfile member to struct vmap.
xcoff{exec,solib}.c: Use it, not lookup_objfile_bfd.
xcoffexec.c (add_vmap): Allocate objfiles here.
|
|
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
|
|
* tm-rs6000.h (BELIEVE_PCC_PROMOTION): Define, since AIX cc gets
it right.
(aix_framedata): added nosavedpc field.
(SAVED_PC_AFTER_CALL): Don't try to optimize; just call
read_register.
(FRAMELESS_FUNCTION_INVOCATION): Pass second argument of 0.
(FRAME_SAVED_PC): If PC not saved, use SAVED_PC_AFTER_CALL.
* rs6000-tdep.c (skip_prologue): Handle gcc generated stfd
instructions as function_frame_info does. Expand special case of
st r31,-4(r1) to be st r31,NUM(r1), since gcc can generate offsets
other than -4.
(pop_frame): Add 4 rather than sizeof (int) to avoid host
dependence.
(function_frame_info): Set frameless if the function has no frame,
and set nosavedpc if the PC was not saved. Handle gcc generated
stfd 31,-4(31); st 31, -12(31) correctly.
(frameless_function_invocation): New second argument pcsaved; if 0
return whether the function has a frame, if 1 return whether the
function saved PC.
(frame_initial_stack_address): Correct typo: cache registers for
callee_fi, not for fi, (avoids reading garbage memory locations).
|
|
* infptrace.c: remove #ifdef USG from around include ptrace.h.
machines without this header should not be compiling this file.
* nm-rs6000.h, rs6000-nat.c: new files for native support.
* rs6000-tdep.c: do not include sys/ptrace.h or sys/reg.h.
* rs6000-xdep.c: removed. all code now in rs6000-nat.c.
* xm-rs6000.h: do not include ptrace.h.
(ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to nm-rs6000.h.
* config/rs6000.mh (XDEPFILES): removed rs6000-xdep.o.
infptrace.o and inftarg.o move to NATDEPFIES.
(NAT_FILE, NATDEPFILES): new macro for native support.
|
|
calls to {fetch|store}_inferior_registers with calls to
target_{fetch|store}_registers, for remote-target independence.
|
|
* infptrace.c (child_resume): Don't deal with NO_SINGLE_STEP
here; it is dealt with at a gdb-target-independent level.
* rs6000-tdep.c (single_step): Don't call ptrace, we are a
high toned routine. Fix return type to void.
|
|
|
|
* breakpoint.c (fixup_breakpoints): Re-kludge to IBM6000_TARGET.
* buildsym.c, rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h,
xcoffexec.c, xcoffread.c: Rename aixcoff to xcoff everywhere.
* printcmd.c (print_frame_args): Remove an RS/6000 dependency.
* stabsread.c (define_symbol): Remove RS/6000 dependencies.
* tm-rs6000.h (ATTACH_DETACH): Remove: host-dependent.
(PTRACE_ATTACH, PTRACE_DETACH): Remove: host-dep.
(NO_SINGLE_STEP): Add, target-dependent.
(loadinfotextindex): Lowercase, remove "aix_".
* xm-rs6000.h: Add <sys/ptrace.h> for infptrace.c.
(NO_SINGLE_STEP): Remove, target-dependent.
* xcoffexec.c (vmap_symtab): Cleanup #if 0'd code.
* xcoffread.c: Only build file if RS/6000 native GDB.
(build_function_symbol): Remove #if 0'd code.
* rs6000-tdep.c: Cleanup. Add static fn protos.
Use CORE_ADDR for addresses throughout. Make void fns void.
(pop_dummy_frame): Add FIXME about bogosity of design here.
(rs6000_struct_return_address): Ditto.
(frameless_function_invocation, frame_get_cache_fsr,
frame_initial_stack_address, xcoff_relocate_symtab,
xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo,
add_text_to_loadinfo, find_toc_address): Move from xdep file.
Use CORE_ADDRs. Change identifiers to lowercase.
* rs6000-xdep.c: Make whole file conditional on native RS/6000,
supplying dummy routines if non-native. Add prototype for
static exec_one_dummy_insn. Move a mess of functions to
rs6000-tdep.c (as above). Remove #if 0'd code.
* config/rs6000.mh (XDEPFILES): Move xcoffexec.o to target side.
(XM_CLIBS): Add -lm to circumvent AIX 3.2 libc ldexp bug.
* config/rs6000.mt (TDEPFILES): Adopt xcoffexec.o.
* gdbtypes.h (TYPE_ALLOC): Parenthesize result to avoid problems
for callers.
|
|
* coffread.c (coff_end_symtab): Cast 2nd arg of complain() to
correct type.
* defs.h (NORETURN): Define away for Lucid compiler.
* remote.c (remote_timer, remote_interrupt): Signal handlers
take one int arg.
* ser-termios.c (serial_write, serial_close): Return whatever
value the write/close call returns, rather than falling off end.
* inferior.h (PTRACE_ARG3_TYPE): Third arg to ptrace is int on
more systems than it is "char *". Define PTRACE_ARG3_TYPE to
default to int.
* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
inferior.h (call_ptrace): Use PTRACE_ARG3_TYPE to declare type
of third arg.
* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
symm-xdep.c, ultra3-xdep.c: Use PTRACE_ARG3_TYPE to cast ptrace
argument 3.
* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
store_inferior_registers): Supply missing fourth argument to
ptrace().
|
|
|
|
|
|
|
|
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
|
|
|
|
|
|
|
|
* param-no-tm.h: Change users to define TM_FILE_OVERRIDE instead.
* param.h, param-no-tm.h: Removed.
* Update copyrights in all changed files.
* dbxread.c, dwarfread.c, inflow.c, infrun.c, m2-exp.y, putenv.c,
solib.c, symtab.h, tm-umax.h, valprint.c: Lint.
* tm-convex.h, tm-hp300hpux.h, tm-merlin.h, tm-sparc.h,
xm-merlin.h: Avoid host include files in target descriptions.
* getpagesize.h: Removed, libiberty copes now.
|
|
xm-rs6000.h: New files.
* xcoffexec.c: New file for handling AIX shared libraries.
|
