| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The remote target's remote_async_inferior_event_token is a flag that
tells when it wants the infrun loop to call its wait method. The flag
is cleared in the async_event_handler's callback
(remote_async_inferior_event_handler), just before calling
inferior_event_handler. However, since inferior_event_handler may
actually call another target's wait method, there needs to be code that
checks if we need to re-raise the flag.
It would be simpler instead for remote_target::wait to clear the flag
when it returns an event and there are no more to report after that. If
another target's wait method gets called by inferior_event_handler, the
remote target's flag will stay naturally stay marked.
Note that this is already partially implemented in remote_target::wait,
since the remote target may have multiple events to report (and it can
only report one at the time):
if (target_is_async_p ())
{
remote_state *rs = get_remote_state ();
/* If there are are events left in the queue tell the event loop
to return here. */
if (!rs->stop_reply_queue.empty ())
mark_async_event_handler (rs->remote_async_inferior_event_token);
}
The code in remote_async_inferior_event_handler also checks for pending
events as well, in addition to the stop reply queue, so I've made
remote_target::wait check for that as well. I'm not completely sure
this is ok, since I don't understand very well how the pending events
mechanism works. But I figured it was safer to do this, worst case it
just leads to unnecessary calls to remote_target::wait.
gdb/ChangeLog:
* remote.c (remote_target::wait): Clear async event handler at
beginning, mark if needed at the end.
(remote_async_inferior_event_handler): Don't set or clear async
event handler.
Change-Id: I20117f5b5acc8a9972c90f16280249b766c1bf37
|
|
The `ready` flag of async event handlers is cleared by the async event
handler system right before invoking the associated callback, in
check_async_event_handlers.
This is not ideal with how the infrun subsystem consumes events: all
targets' async event handler callbacks essentially just invoke
`inferior_event_handler`, which eventually calls `fetch_inferior_event`
and `do_target_wait`. `do_target_wait` picks an inferior at random,
and thus a target at random (it could be the target whose `ready` flag
was cleared, or not), and pulls one event from it.
So it's possible that:
- the async event handler for a target A is called
- we end up consuming an event for target B
- all threads of target B are stopped, target_async(0) is called on it,
so its async event handler is cleared (e.g.
record_btrace_target::async)
As a result, target A still has events to report while its async event
handler is left unmarked, so these events are not consumed. To counter
this, at the end of their async event handler callbacks, targets check
if they still have something to report and re-mark their async event
handler (e.g. remote_async_inferior_event_handler).
The linux_nat target does not suffer from this because it doesn't use an
async event handler at the moment. It only uses a pipe registered with
the event loop. It is written to in the SIGCHLD handler (and in other
spots that want to get target wait method called) and read from in
the target's wait method. So if linux_nat happened to be target A in
the example above, the pipe would just stay readable, and the event loop
would wake up again, until linux_nat's wait method is finally called and
consumes the contents of the pipe.
I think it would be nicer if targets using async_event_handler worked in
a similar way, where the flag would stay set until the target's wait
method is actually called. As a first step towards that, this patch
moves the responsibility of clearing the ready flags of async event
handlers to the invoked callback.
All async event handler callbacks are modified to clear their ready flag
before doing anything else. So in practice, nothing changes with this
patch. It's only the responsibility of clearing the flag that is
shifted toward the callee.
gdb/ChangeLog:
* async-event.h (async_event_handler_func): Add documentation.
* async-event.c (check_async_event_handlers): Don't clear
async_event_handler ready flag.
* infrun.c (infrun_async_inferior_event_handler): Clear ready
flag.
* record-btrace.c (record_btrace_handle_async_inferior_event):
Likewise.
* record-full.c (record_full_async_inferior_event_handler):
Likewise.
* remote-notif.c (remote_async_get_pending_events_handler):
Likewise.
* remote.c (remote_async_inferior_event_handler): Likewise.
Change-Id: I179ef8e99580eae642d332846fd13664dbddc0c1
|
|
A following patch will add a testcase that has a number of threads
constantly stepping over a breakpoint, and then has GDB detach the
process. That testcase sometimes fails with the inferior crashing
with SIGTRAP after the detach because of the bug fixed by this patch,
when tested with the native target.
The problem is that target_detach removes breakpoints from the target
immediately, and that does not work with the native GNU/Linux target
(and probably no other native target) currently. The test wouldn't
fail with this issue when testing against gdbserver, because gdbserver
does allow accessing memory while the current thread is running, by
transparently pausing all threads temporarily, without GDB noticing.
Implementing that in gdbserver was a lot of work, so I'm not looking
forward right now to do the same in the native target. Instead, I
came up with a simpler solution -- push the breakpoints removal down
to the targets. The Linux target conveniently already pauses all
threads before detaching them, since PTRACE_DETACH only works with
stopped threads, so we move removing breakpoints to after that. Only
the remote and GNU/Linux targets support support async execution, so
no other target should really need this.
gdb/ChangeLog:
* linux-nat.c (linux_nat_target::detach): Remove breakpoints
here...
* remote.c (remote_target::remote_detach_1): ... and here ...
* target.c (target_detach): ... instead of here.
* target.h (target_ops::detach): Add comment.
|
|
A following patch will add a testcase that has two processes with
threads stepping over a breakpoint continuously, and then detaches
from one of the processes while threads are running. The other
process continues stepping over its breakpoint. And then the testcase
sends a SIGUSR1, expecting that GDB reports it. That would sometimes
hang against gdbserver, due to the bugs fixed here. Both bugs are
related, in that they're about remote protocol asynchronous Stop
notifications. There's a bug in GDB, and another in GDBserver.
The GDB bug:
- when we detach from a process, the remote target discards any
pending RSP notification related to that process, including the
in-flight, yet-unacked notification. Discarding the in-flight
notification is the problem. Until the in-flight notification is
acked with a vStopped packet, the server won't send another %Stop
notification. As a result, the debug session gets messed up. In
the new testcase's case, GDB would hang inside stop_all_threads,
waiting for a stop for one of the process'es threads, which never
arrived -- its stop reply was permanently stuck in the stop reply
queue, waiting for a vStopped packet that never arrived.
In summary:
1. GDBserver sends stop notification about thread X, the remote
target receives it and stores it
2. At the same time, GDB detaches thread X's inferior
3. The remote target discards the received stop notification
4. GDBserver waits forever for the ack
The GDBserver bug:
GDBserver has the opposite bug. It also discards notifications for
the process being detached. If that discards the head of the
notification queue, when gdb sends an ack, it ends up acking the
_next_ notification. Meaning, gdb loses one notification. In the
testcase, this results in a similar hang in stop_all_threads.
So we have two very similar bugs in GDB and GDBserver, both resulting
in a similar symptom. That's why I'm fixing them both at the same
time.
gdb/ChangeLog:
* remote.c (remote_notif_stop_ack): Don't error out on
TARGET_WAITKIND_IGNORE; instead, just ignore the notification.
(remote_target::discard_pending_stop_replies): Don't delete
in-flight notification; instead, clear its contents.
gdbserver/ChangeLog:
* server.cc (discard_queued_stop_replies): Don't ever discard the
notification at the head of the list.
|
|
With "target extended-remote" + "maint set target-non-stop", attaching
hangs like so:
(gdb) attach 1244450
Attaching to process 1244450
[New Thread 1244450.1244450]
[New Thread 1244450.1244453]
[New Thread 1244450.1244454]
[New Thread 1244450.1244455]
[New Thread 1244450.1244456]
[New Thread 1244450.1244457]
[New Thread 1244450.1244458]
[New Thread 1244450.1244459]
[New Thread 1244450.1244461]
[New Thread 1244450.1244462]
[New Thread 1244450.1244463]
* hang *
Attaching to the hung GDB shows that GDB is busy in an infinite loop
in stop_all_threads:
(top-gdb) bt
#0 stop_all_threads () at /home/pedro/gdb/binutils-gdb/src/gdb/infrun.c:4755
#1 0x000055555597b424 in stop_waiting (ecs=0x7fffffffd930) at /home/pedro/gdb/binutils-gdb/src/gdb/infrun.c:7738
#2 0x0000555555976fba in handle_signal_stop (ecs=0x7fffffffd930) at /home/pedro/gdb/binutils-gdb/src/gdb/infrun.c:5868
#3 0x0000555555975f6a in handle_inferior_event (ecs=0x7fffffffd930) at /home/pedro/gdb/binutils-gdb/src/gdb/infrun.c:5527
#4 0x0000555555971da4 in fetch_inferior_event () at /home/pedro/gdb/binutils-gdb/src/gdb/infrun.c:3910
#5 0x00005555559540b2 in inferior_event_handler (event_type=INF_REG_EVENT) at /home/pedro/gdb/binutils-gdb/src/gdb/inf-loop.c:42
#6 0x000055555597e825 in infrun_async_inferior_event_handler (data=0x0) at /home/pedro/gdb/binutils-gdb/src/gdb/infrun.c:9162
#7 0x0000555555687d1d in check_async_event_handlers () at /home/pedro/gdb/binutils-gdb/src/gdb/async-event.c:328
#8 0x0000555555e48284 in gdb_do_one_event () at /home/pedro/gdb/binutils-gdb/src/gdbsupport/event-loop.cc:216
#9 0x00005555559e7512 in start_event_loop () at /home/pedro/gdb/binutils-gdb/src/gdb/main.c:347
#10 0x00005555559e765d in captured_command_loop () at /home/pedro/gdb/binutils-gdb/src/gdb/main.c:407
#11 0x00005555559e8f80 in captured_main (data=0x7fffffffdb70) at /home/pedro/gdb/binutils-gdb/src/gdb/main.c:1239
#12 0x00005555559e8ff2 in gdb_main (args=0x7fffffffdb70) at /home/pedro/gdb/binutils-gdb/src/gdb/main.c:1254
#13 0x0000555555627c86 in main (argc=12, argv=0x7fffffffdc88) at /home/pedro/gdb/binutils-gdb/src/gdb/gdb.c:32
The problem is that the remote sends stops for all the threads:
Packet received: l/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.threads/attach-non-stop/attach-non-stop
Sending packet: $vStopped#55...Packet received: T0006:f06e25edec7f0000;07:f06e25edec7f0000;10:f14190ccf4550000;thread:p12fd22.12fd2f;core:15;
Sending packet: $vStopped#55...Packet received: T0006:f0dea5f0ec7f0000;07:f0dea5f0ec7f0000;10:e84190ccf4550000;thread:p12fd22.12fd27;core:4;
Sending packet: $vStopped#55...Packet received: T0006:f0ee25f1ec7f0000;07:f0ee25f1ec7f0000;10:f14190ccf4550000;thread:p12fd22.12fd26;core:5;
Sending packet: $vStopped#55...Packet received: T0006:f0bea5efec7f0000;07:f0bea5efec7f0000;10:f14190ccf4550000;thread:p12fd22.12fd29;core:1;
Sending packet: $vStopped#55...Packet received: T0006:f0ce25f0ec7f0000;07:f0ce25f0ec7f0000;10:e84190ccf4550000;thread:p12fd22.12fd28;core:a;
Sending packet: $vStopped#55...Packet received: T0006:f07ea5edec7f0000;07:f07ea5edec7f0000;10:e84190ccf4550000;thread:p12fd22.12fd2e;core:f;
Sending packet: $vStopped#55...Packet received: T0006:f0ae25efec7f0000;07:f0ae25efec7f0000;10:df4190ccf4550000;thread:p12fd22.12fd2a;core:6;
Sending packet: $vStopped#55...Packet received: T0006:0000000000000000;07:c0e8a381fe7f0000;10:bf43b4f1ec7f0000;thread:p12fd22.12fd22;core:2;
Sending packet: $vStopped#55...Packet received: T0006:f0fea5f1ec7f0000;07:f0fea5f1ec7f0000;10:df4190ccf4550000;thread:p12fd22.12fd25;core:8;
Sending packet: $vStopped#55...Packet received: T0006:f09ea5eeec7f0000;07:f09ea5eeec7f0000;10:e84190ccf4550000;thread:p12fd22.12fd2b;core:b;
Sending packet: $vStopped#55...Packet received: OK
But then wait_one never consumes them, always hitting this path:
4473 if (nfds == 0)
4474 {
4475 /* No waitable targets left. All must be stopped. */
4476 return {NULL, minus_one_ptid, {TARGET_WAITKIND_NO_RESUMED}};
4477 }
Resulting in GDB constanly calling target_stop to stop threads, but
the remote target never reporting back the stops to infrun.
That TARGET_WAITKIND_NO_RESUMED path shown above is always taken
because here, in wait_one too, just above:
4428 for (inferior *inf : all_inferiors ())
4429 {
4430 process_stratum_target *target = inf->process_target ();
4431 if (target == NULL
4432 || !target->is_async_p ()
^^^^^^^^^^^^^^^^^^^^^
4433 || !target->threads_executing)
4434 continue;
... the remote target is not async.
And in turn that happened because extended_remote_target::attach
misses enabling async in the target-non-stop path.
A testcase exercising this will be added in a following patch.
gdb/ChangeLog:
* remote.c (extended_remote_target::attach): Set target async in
the target-non-stop path too.
|
|
This is the next in the new-style debug macro series.
For this one, I decided to omit the function name from the "Sending packet" /
"Packet received" kind of prints, just because it's not very useful in that
context and hinders readability more than anything else. This is completely
arbitrary.
This is with:
[remote] putpkt_binary: Sending packet: $qTStatus#49...
[remote] getpkt_or_notif_sane_1: Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::
and without:
[remote] Sending packet: $qTStatus#49...
[remote] Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::
A difference is that previously, the query packet and its reply would be
printed on the same line, like this:
Sending packet: $qTStatus#49...Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::
Now, they are printed on two lines, since each remote_debug_printf{,_nofunc}
prints its own complete message including an end of line. It's probably
a matter of taste, but I prefer the two-line version, it's easier to
follow, especially when the query packet is long.
As a result, lib/range-stepping-support.exp needs to be updated, as it
currently expects the vCont packet and the reply to be on the same line.
I think it's sufficient in that context to just expect the vCont packet
and not the reply, since the goal is just to count how many vCont;r GDB
sends.
gdb/ChangeLog:
* remote.h (remote_debug_printf): New.
(remote_debug_printf_nofunc): New.
(REMOTE_SCOPED_DEBUG_ENTER_EXIT): New.
* remote.c: Use above macros throughout file.
gdbsupport/ChangeLog:
* common-debug.h (debug_prefixed_printf_cond_nofunc): New.
* common-debug.c (debug_prefixed_vprintf): Handle a nullptr
func.
gdb/testsuite/ChangeLog:
* lib/range-stepping-support.exp (exec_cmd_expect_vCont_count):
Adjust to "set debug remote" changes.
Change-Id: Ica6dead50d3f82e855c7d763f707cef74bed9fee
|
|
As far as I can see, there are no more spots looking for a remote_debug
other than true/false. If we ever want to revert to an int, we can
always change it back later, but this makes things simpler for now.
gdb/ChangeLog:
* remote.h (remote_debug): Change to bool.
* remote.c (remote_debug): Change to bool.
(_initialize_remote): Adjust.
Change-Id: I21aac5b4cff9dc4f75c8efaf47c23583ecabd2a6
|
|
remote_debug is currently declared in target.h and defined in top.c.
Move them to remote.h and remote.c.
Include remote.h in remote-sim.c, as it uses remote_debug.
gdb/ChangeLog:
* target.h (remote_debug): Move to...
* remote.h (remote_debug): ... here.
* top.c (remote_debug): Move to...
* remote.c (remote_debug): ... here.
* remote-sim.c: Include remote.h.
Change-Id: Iae632d12ff8900b23eee6b2529d6a3cd339a8caa
|
|
Commands "set debug remote" and "set remotetimeout" are defined in
cli/cli-cmds.c, I think it would make more sense for them to be in
remote.c.
gdb/ChangeLog:
* cli/cli-cmds.c (show_remote_debug): Remove.
(show_remote_timeout): Remove.
(_initialize_cli_cmds): Don't register commands.
* remote.c (show_remote_debug): Move here.
(show_remote_timeout): Move here.
(_initialize_remote): Register commands.
Change-Id: Ic4d81888aa4f8dde89d1d29397ef19a08951b80b
|
|
When building with gcc 4.8, we get:
CXX remote.o
cc1plus: warning: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
/home/smarchi/src/binutils-gdb/gdb/remote.c:1157:38: error: 'resume_state' is not a class, namespace, or enumeration
enum resume_state m_resume_state = resume_state::NOT_RESUMED;
^
It looks like gcc 4.8 doesn't like that there is an enum class named
resume_state as well as a method. Since it's an easy fix, rename the method to
get_remote_state to avoid the clash.
gdb/ChangeLog:
PR gdb/27219
* remote.c (struct remote_thread_info) <resume_state>: Rename
to...
<get_resume_state>: ... this.
(remote_target::resume): Adjust.
(remote_target::commit_resume): Adjust.
(remote_target::select_thread_for_ambiguous_stop_reply): Adjust.
Change-Id: Ib86c877a4c75ee671d69c27ed06cb8f57bc087db
|
|
gdb/ChangeLog:
* remote.c (class remote_target) <remote_hostio_send_command,
remote_hostio_parse_result>: Constify parameter.
(remote_hostio_parse_result): Likewise.
(remote_target::remote_hostio_send_command): Adjust.
(remote_target::remote_hostio_pread_vFile): Adjust.
(remote_target::fileio_readlink): Adjust.
(remote_target::fileio_fstat): Adjust.
Change-Id: I6b585b99937e6526a0a7e06261d2193114589912
|
|
The wait_status variable is only used when the target is in in all-stop
mode. We can therefore move it in the !target_is_non_stop scope. That
lets us remove the assert in the else, that checks that the wait status
is not set. If the variable doesn't exist in that scope, it pretty much
guarantees that it is not set.
gdb/ChangeLog:
* remote.c (remote_target::start_remote): Move wait_status to
narrower scope.
Change-Id: I30979135e3f4f36d04178baa67575c4e58d3b648
|
|
... and adjust callers / callees.
gdb/ChangeLog:
* remote.c (class remote_target):
<add_current_inferior_and_thread>: Constify parameter.
(stop_reply_extract_thread): Likewise.
(remote_target::get_current_thread): Likewise.
(remote_target::add_current_inferior_and_thread): Likewise.
Change-Id: Ifdc6c263104b58852b532cfda81caf836437d29c
|
|
Const-ify the unpack_* functions, and then adjust the callers
accordingly.
gdb/ChangeLog:
* remote.c (class remote_target)
<remote_unpack_thread_info_response,
parse_threadlist_response>: Constify parameter and/or return
value and or local variable.
(stub_unpack_int): Likewise.
(unpack_nibble): Likewise.
(unpack_byte): Likewise.
(unpack_int): Likewise.
(unpack_string): Likewise.
(unpack_threadid): Likewise.
(remote_target::remote_unpack_thread_info_response): Likewise.
(remote_target::parse_threadlist_response): Likewise.
Change-Id: Ibda75f664d6e3452df00f85af7134533049171b7
|
|
This commit builds on work started in the following two commits:
commit 24ed6739b699f329c2c45aedee5f8c7d2f54e493
Date: Thu Jan 30 14:35:40 2020 +0000
gdb/remote: Restore support for 'S' stop reply packet
commit cada5fc921e39a1945c422eea055c8b326d8d353
Date: Wed Mar 11 12:30:13 2020 +0000
gdb: Handle W and X remote packets without giving a warning
This is related to how GDB handles remote targets that send back 'S'
packets.
In the first of the above commits we fixed GDB's ability to handle a
single process, single threaded target that sends back 'S' packets.
Although the 'T' packet would always be preferred to 'S' these days,
there's nothing really wrong with 'S' for this situation.
The second commit above fixed an oversight in the first commit, a
single-process, multi-threaded target can send back a process wide
event, for example the process exited event 'W' without including a
process-id, this also is fine as there is no ambiguity in this case.
In PR gdb/26819 we run into yet another problem with the above
commits. In this case we have a single process with two threads, GDB
hits a breakpoint in thread 2 and then performs a stepi:
(gdb) b main
Breakpoint 1 at 0x1212340830: file infinite_loop.S, line 10.
(gdb) c
Continuing.
Thread 2 hit Breakpoint 1, main () at infinite_loop.S:10
10 in infinite_loop.S
(gdb) set debug remote 1
(gdb) stepi
Sending packet: $vCont;s:2#24...Packet received: S05
../binutils-gdb/gdb/infrun.c:5807: internal-error: int finish_step_over(execution_control_state*): Assertion `ecs->event_thread->control.trap_expected' failed.
What happens in this case is that on the RISC-V target displaced
stepping is not supported, so when the stepi is issued GDB steps just
thread 2. As only a single thread was set running the target decides
that is can get away with sending back an 'S' packet without a
thread-id. GDB then associates the stop with thread 1 (the first
non-exited thread), but as thread 1 was not previously set executing
the assertion seen above triggers.
As an aside I am surprised that the target sends pack 'S' in this
situation. The target is happy to send back 'T' (including thread-id)
when multiple threads are set running, so (to me) it would seem easier
to just always use the 'T' packet when multiple threads are in use.
However, the target only uses 'T' when multiple threads are actually
executing, otherwise an 'S' packet it used.
Still, when looking at the above situation we can see that GDB should
be able to understand which thread the 'S' reply is referring too.
The problem is that is that in commit 24ed6739b699 (above) when a stop
reply comes in with no thread-id we look for the first non-exited
thread and select that as the thread the stop applies too.
What we should really do is select the first non-exited, resumed thread,
and associate the stop event with this thread. In the above example
both thread 1 and 2 are non-exited, but only thread 2 is resumed, so
this is what we should use.
There's a test for this issue included which works with stock
gdbserver by disabling use of the 'T' packet, and enabling
'scheduler-locking' within GDB so only one thread is set running.
gdb/ChangeLog:
PR gdb/26819
* remote.c
(remote_target::select_thread_for_ambiguous_stop_reply): New
member function.
(remote_target::process_stop_reply): Call
select_thread_for_ambiguous_stop_reply.
gdb/testsuite/ChangeLog:
PR gdb/26819
* gdb.server/stop-reply-no-thread-multi.c: New file.
* gdb.server/stop-reply-no-thread-multi.exp: New file.
Change-Id: I9b49d76c2a99063dcc76203fa0f5270a72825d15
|
|
The next patch moves the target commit_resume method to be a
process_stratum_target-only method. The only non-process targets that
currently implement the commit_resume method are the btrace and full
record targets. The only reason they need to do so is to prevent a
commit resume from reaching the beneath (process) target if they are
currently replaying.
This is important if a record target is used on top of the remote target
(the only process target implementing the commit_resume method).
Currently, the remote target checks the `thread_info::executing` flag of
a thread to know if it should commit resume that thread:
if (!tp->executing || remote_thr->vcont_resumed)
continue;
The `tp->executing` flag is set by infrun when it has asked the target
stack to resume the thread, and therefore if the thread is executing,
from its point of view. It _not_ equivalent to whether the remote
target was asked to resume this thread.
Indeed, if infrun asks the target stack to resume some thread while the
record target is replaying, the record target won't forward the resume
request the remote target beneath, because we don't actually want to
resume the thread on the execution target. But the `tp->executing` flag
is still set, because from the point of view of infrun, the thread
executes. So, if the commit_resume call wasn't intercepted by the
record target as it is today and did reach the remote target, the remote
target would say "Oh, this thread should be executing and I haven't
vCont-resumed it! I must vCont-resume it!". But that would be wrong,
because it was never asked to resume this thread, the resume request did
not reach it. This is why the record targets currently need to
implement commit_resume: to prevent the beneath target from
commit_resuming threads it wasn't asked to resume.
Since commit_resume will become a method on process_stratum_target in
the following patch, record targets won't have a chance to intercept the
calls and that would result in the remote target commit_resuming threads
it shouldn't. To avoid this, this patch makes the remote target track
its own thread resumption state. That means, tracking which threads it
was asked to resume via target_ops::resume. Regardless of the context
of this patch, I think this change makes it easier to understand how
resume / commit_resume works in the remote target. It makes the target
more self-contained, as it only depends on what it gets asked to do via
the target methods, and not on tp->executing, which is a flag maintained
from the point of view of infrun.
I initially made it so this state was only used when the remote target
operates in non-stop mode, since commit_resume is only used when the
target is non-stop. However, it's more consistent and it can be useful
to maintain this state even in all-stop too. In all-stop, receiving a
stop notification for one thread means all threads of the target are
considered stopped.
From the point of view of the remote target, there are three states a
thread can be in:
1. not resumed
2. resumed but pending vCont-resume
3. resumed
State 2 only exists when the target is non-stop.
As of this patch, valid state transitions are:
- 1 -> 2 (through the target resume method if in non-stop)
- 2 -> 3 (through the target commit_resume method if in non-stop)
- 1 -> 3 (through the target resume method if in all-stop)
- 3 -> 1 (through a remote stop notification / reporting an event to the
event loop)
A subsequent patch will make it possible to go from 2 to 1, in case
infrun asks to stop a thread that was resumed but not commit-resumed
yet. I don't think it can happen as of now.
In terms of code, this patch replaces the vcont_resumed field with an
enumeration that explicitly represents the three states described above.
The last_resume_sig and last_resume_step fields are moved to a structure
which is clearly identified as only used when the thread is in the
"resumed but pending vCont-resume" state.
gdb/ChangeLog:
* remote.c (enum class resume_state): New.
(struct resumed_pending_vcont_info): New.
(struct remote_thread_info) <resume_state, set_not_resumed,
set_resumed_pending_vcont, resumed_pending_vcont_info,
set_resumed, m_resume_state, m_resumed_pending_vcont_info>:
New.
<last_resume_step, last_resume_sig, vcont_resumed>: Remove.
(remote_target::remote_add_thread): Adjust.
(remote_target::process_initial_stop_replies): Adjust.
(remote_target::resume): Adjust.
(remote_target::commit_resume): Rely on state in
remote_thread_info and not on tp->executing.
(remote_target::process_stop_reply): Adjust.
Change-Id: I10480919ccb4552faa62575e447a36dbe7c2d523
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
This removes the symfile_objfile macro, in favor of just spelling out
the member access.
gdb/ChangeLog
2020-10-29 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_solib_create_inferior_hook): Update.
* target.c (info_target_command): Update.
* symfile.c (syms_from_objfile_1, finish_new_objfile)
(symbol_file_clear, reread_symbols): Update.
* symfile-mem.c (add_symbol_file_from_memory_command): Update.
* stabsread.c (scan_file_globals): Update.
* solib.c (update_solib_list): Update.
* solib-svr4.c (elf_locate_base, open_symbol_file_object)
(svr4_fetch_objfile_link_map, enable_break)
(svr4_relocate_main_executable)
(svr4_iterate_over_objfiles_in_search_order): Update.
* solib-frv.c (lm_base, enable_break)
(frv_relocate_main_executable): Update.
(main_got, frv_fdpic_find_canonical_descriptor): Update.
(frv_fetch_objfile_link_map): Update.
* solib-dsbt.c (lm_base, dsbt_relocate_main_executable): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-aix.c (solib_aix_solib_create_inferior_hook): Update.
* remote.c (remote_target::get_offsets): Update.
(remote_target::start_remote)
(extended_remote_target::post_attach): Update.
* objfiles.c (entry_point_address_query): Update.
* nto-procfs.c (nto_procfs_target::create_inferior): Update.
* minsyms.c (get_symbol_leading_char): Update.
* frame.c (inside_main_func): Update.
* progspace.h (symfile_objfile): Remove macro.
|
|
This removes the exec_bfd macro, in favor of new accessors on
program_space. In one spot the accessor can't be used; but this is
still a big improvement over the macro, IMO.
gdb/ChangeLog
2020-10-29 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_solib_create_inferior_hook): Update.
* symfile.c (reread_symbols): Update.
* symfile-mem.c (add_symbol_file_from_memory_command)
(add_vsyscall_page): Update.
* source-cache.c (source_cache::get_plain_source_lines): Update.
* solib-svr4.c (find_program_interpreter, elf_locate_base)
(svr4_current_sos_direct, svr4_exec_displacement)
(svr4_relocate_main_executable): Update.
(svr4_iterate_over_objfiles_in_search_order): Update.
* solib-frv.c (enable_break2, enable_break): Update.
* solib-dsbt.c (lm_base, enable_break): Update.
* solib-darwin.c (find_program_interpreter)
(darwin_solib_create_inferior_hook): Update.
* sol-thread.c (rw_common, ps_pdmodel): Update.
* rs6000-nat.c (rs6000_nat_target::create_inferior): Update.
* remote.c (compare_sections_command)
(remote_target::trace_set_readonly_regions): Update.
* remote-sim.c (get_sim_inferior_data)
(gdbsim_target::create_inferior, gdbsim_target::create_inferior): Update.
(gdbsim_target_open, gdbsim_target::files_info): Update.
* exec.h (exec_bfd): Remove macro.
* progspace.c (initialize_progspace): Update.
* proc-service.c (ps_addr_to_core_addr, core_addr_to_ps_addr):
Update.
* nto-procfs.c (nto_procfs_target::post_attach)
(nto_procfs_target::create_inferior): Update.
* maint.c (maintenance_info_sections): Update.
* linux-thread-db.c (thread_db_target::get_thread_local_address):
Update.
* infcmd.c (post_create_inferior): Update.
* gcore.c (default_gcore_arch, default_gcore_target): Update.
(objfile_find_memory_regions): Update.
* exec.c (validate_exec_file, exec_file_attach)
(exec_read_partial_read_only, print_section_info): Update.
* corelow.c (core_target_open): Update.
* corefile.c (reopen_exec_file, validate_files): Update.
* arm-tdep.c (gdb_print_insn_arm): Update.
* arch-utils.c (gdbarch_update_p, default_print_insn): Update.
* progspace.h (struct program_space) <exec_bfd, set_exec_bfd>: New
methods.
|
|
Because target_section_table only holds a vector, and because it is
used in an "open" way, this patch makes it just be an alias for the
std::vector specialization. This makes the code less wordy. If we do
ever want to add more specialized behavior to this type, it's simple
enough to convert it back to a struct with the few needed methods
implied by this change.
gdb/ChangeLog
2020-10-12 Tom Tromey <tom@tromey.com>
* target.h (struct target_ops) <get_section_table>: Update.
(target_get_section_table): Update.
* target.c (target_get_section_table, target_section_by_addr)
(memory_xfer_partial_1): Update.
* target-section.h (target_section_table): Now an alias.
* target-delegates.c: Rebuild.
* target-debug.h (target_debug_print_target_section_table_p):
Rename from target_debug_print_struct_target_section_table_p.
* symfile.c (build_section_addr_info_from_section_table): Update.
* solib.c (solib_map_sections, solib_contains_address_p): Update.
* solib-svr4.c (scan_dyntag): Update.
* solib-dsbt.c (scan_dyntag): Update.
* remote.c (remote_target::remote_xfer_live_readonly_partial):
Update.
* record-full.c (record_full_core_target::xfer_partial): Update.
* progspace.h (struct program_space) <target_sections>: Update.
* exec.h (print_section_info): Update.
* exec.c (exec_target::close, build_section_table)
(add_target_sections, add_target_sections_of_objfile)
(remove_target_sections, exec_on_vfork)
(section_table_available_memory)
(section_table_xfer_memory_partial)
(exec_target::get_section_table, exec_target::xfer_partial)
(print_section_info, set_section_command)
(exec_set_section_address, exec_target::has_memory): Update.
* corelow.c (core_target::build_file_mappings)
(core_target::xfer_partial, core_target::info_proc_mappings)
(core_target::info_proc_mappings): Update.
* bfd-target.c (class target_bfd): Update
|
|
This changes target_section_table to wrap a std::vector. This
simplifies some code, and also enables the simplifications coming in
the subsequent patches.
Note that for solib, I chose to have it use a pointer to a
target_section_table. This is more convoluted than would be ideal,
but I didn't want to convert solib to new/delete as a prerequisite for
this series.
gdb/ChangeLog
2020-10-12 Tom Tromey <tom@tromey.com>
* target.c (target_section_by_addr, memory_xfer_partial_1):
Update.
* target-section.h (struct target_section_table): Use
std::vector.
* symfile.h (build_section_addr_info_from_section_table): Take a
target_section_table.
* symfile.c (build_section_addr_info_from_section_table): Take a
target_section_table.
* solist.h (struct so_list) <sections>: Change type.
<sections_end>: Remove.
* solib.c (solib_map_sections, clear_so, solib_read_symbols)
(solib_contains_address_p): Update.
* solib-svr4.c (scan_dyntag): Update.
* solib-dsbt.c (scan_dyntag): Update.
* remote.c (remote_target::remote_xfer_live_readonly_partial):
Update.
* record-full.c (record_full_core_start, record_full_core_end):
Remove.
(record_full_core_sections): New global.
(record_full_core_open_1, record_full_core_target::xfer_partial):
Update.
* exec.h (build_section_table, section_table_xfer_memory_partial)
(add_target_sections): Take a target_section_table.
* exec.c (exec_file_attach, clear_section_table): Update.
(resize_section_table): Remove.
(build_section_table, add_target_sections): Take a
target_section_table.
(add_target_sections_of_objfile, remove_target_sections)
(exec_on_vfork): Update.
(section_table_available_memory): Take a target_section_table.
(section_table_read_available_memory): Update.
(section_table_xfer_memory_partial): Take a target_section_table.
(print_section_info, set_section_command)
(exec_set_section_address, exec_target::has_memory): Update.
* corelow.c (class core_target) <m_core_section_table,
m_core_file_mappings>: Remove braces.
<~core_target>: Remove.
(core_target::core_target): Update.
(core_target::~core_target): Remove.
(core_target::build_file_mappings)
(core_target::xfer_memory_via_mappings)
(core_target::xfer_partial, core_target::info_proc_mappings):
Update.
* bfd-target.c (target_bfd::xfer_partial): Update.
(target_bfd::target_bfd): Update.
(target_bfd::~target_bfd): Remove.
|
|
This moves the simple_search_memory function to a new file,
gdbsupport/search.cc. The API is slightly changed to make it more
general. This generality is useful for wiring it to gdbserver, and
also for unit testing.
gdb/ChangeLog
2020-10-07 Tom Tromey <tromey@adacore.com>
* target.h (simple_search_memory): Don't declare.
* target.c (simple_search_memory): Move to gdbsupport.
(default_search_memory): Update.
* remote.c (remote_target::search_memory): Update.
gdbsupport/ChangeLog
2020-10-07 Tom Tromey <tromey@adacore.com>
* Makefile.in: Rebuild.
* Makefile.am (libgdbsupport_a_SOURCES): Add search.cc.
* search.h: New file.
* search.cc: New file.
|
|
Assign names to async event/signal handlers. They will be used in debug
messages when file handlers are invoked.
Unlike in the previous patch, the names are not copied in the structure,
since we don't need to (all names are string literals for the moment).
gdb/ChangeLog:
* async-event.h (create_async_signal_handler): Add name
parameter.
(create_async_event_handler): Likewise.
* async-event.c (struct async_signal_handler) <name>: New field.
(struct async_event_handler) <name>: New field.
(create_async_signal_handler): Assign name.
(create_async_event_handler): Assign name.
* event-top.c (async_init_signals): Pass name when creating
handler.
* infrun.c (_initialize_infrun): Likewise.
* record-btrace.c (record_btrace_push_target): Likewise.
* record-full.c (record_full_open): Likewise.
* remote-notif.c (remote_notif_state_allocate): Likewise.
* remote.c (remote_target::open_1): Likewise.
* tui/tui-win.c (tui_initialize_win): Likewise.
Change-Id: Icd9d9f775542ae5fc2cd148c12f481e7885936d5
|
|
This removes the object-like macro target_has_execution, replacing it
with a function call. target_has_execution_current is also now
handled by this function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* inferior.h (class inferior) <has_execution>: Update.
* windows-tdep.c (windows_solib_create_inferior_hook): Update.
* valops.c (find_function_in_inferior)
(value_allocate_space_in_inferior): Update.
* top.c (kill_or_detach): Update.
* target.c (target_preopen, set_target_permissions): Update.
(target_has_execution_current): Remove.
* sparc64-tdep.c (adi_examine_command, adi_assign_command):
Update.
* solib.c (update_solib_list, reload_shared_libraries): Update.
* solib-svr4.c (svr4_solib_create_inferior_hook): Update.
* solib-dsbt.c (enable_break): Update.
* score-tdep.c (score7_fetch_inst): Update.
* rs6000-nat.c (rs6000_nat_target::xfer_shared_libraries):
Update.
* remote.c (remote_target::start_remote)
(remote_target::remote_check_symbols, remote_target::open_1)
(remote_target::remote_detach_1, remote_target::verify_memory)
(remote_target::xfer_partial, remote_target::read_description)
(remote_target::get_min_fast_tracepoint_insn_len): Update.
* record-full.c (record_full_open_1): Update.
* record-btrace.c (record_btrace_target_open): Update.
* objc-lang.c (lookup_objc_class, lookup_child_selector)
(value_nsstring): Update.
* linux-thread-db.c (add_thread_db_info)
(thread_db_find_new_threads_silently, check_thread_db_callback)
(try_thread_db_load_1, record_thread): Update.
* linux-tdep.c (linux_info_proc, linux_vsyscall_range_raw):
Update.
* linux-fork.c (checkpoint_command): Update.
* infrun.c (set_non_stop, set_observer_mode)
(check_multi_target_resumption, for_each_just_stopped_thread)
(maybe_remove_breakpoints, normal_stop)
(class infcall_suspend_state): Update.
* infcmd.c (ERROR_NO_INFERIOR, kill_if_already_running)
(info_program_command, attach_command): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* inf-loop.c (inferior_event_handler): Update.
* gcore.c (gcore_command, derive_heap_segment): Update.
* exec.c (exec_file_command): Update.
* eval.c (evaluate_subexp): Update.
* compile/compile.c (compile_to_object): Update.
* cli/cli-dump.c (restore_command): Update.
* breakpoint.c (update_watchpoint)
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, get_bpstat_thread): Update.
* target.h (target_has_execution): Remove macro.
(target_has_execution_current): Don't declare.
(target_has_execution): Rename from target_has_execution_1. Add
argument default.
|
|
This changes TARGET_WNOHANG to be a member of an enum, rather than a
define, and also adds a DEF_ENUM_FLAGS_TYPE for this type. Then, it
changes target_wait and the various target wait methods to use this
type rather than "int".
This didn't catch any bugs, but it seems like a decent cleanup
nevertheless.
I did not change deprecated_target_wait_hook, since that's only used
out-of-tree (by Insight), and there didn't seem to be a need.
I can't build some of these targets, so I modified them on a
best-effort basis. I don't think this patch should go in before the
release branch is made.
gdb/ChangeLog
2020-09-18 Tom Tromey <tromey@adacore.com>
* windows-nat.c (struct windows_nat_target) <wait>: Update.
(windows_nat_target::wait): Update.
* target/wait.h (enum target_wait_flag): New. Use
DEF_ENUM_FLAGS_TYPE.
* target/target.h (target_wait): Change type of options.
* target.h (target_options_to_string, default_target_wait):
Update.
(struct target_ops) <wait>: Change type of options.
* target.c (target_wait, default_target_wait, do_option): Change
type of "options".
(target_options_to_string): Likewise.
* target-delegates.c: Rebuild.
* target-debug.h (target_debug_print_target_wait_flags): Rename
from target_debug_print_options.
* sol-thread.c (class sol_thread_target) <wait>: Update.
(sol_thread_target::wait): Update.
* rs6000-nat.c (class rs6000_nat_target) <wait>: Update.
(rs6000_nat_target::wait): Update.
* remote.c (class remote_target) <wait, wait_ns, wait_as>:
Update.
(remote_target::wait_ns, remote_target::wait_as): Change type of
"options".
(remote_target::wait): Update.
* remote-sim.c (struct gdbsim_target) <wait>: Update.
(gdbsim_target::wait): Update.
* record-full.c (class record_full_base_target) <wait>: Update.
(record_full_wait_1): Change type of "options".
(record_full_base_target::wait): Update.
* record-btrace.c (class record_btrace_target) <wait>: Update.
(record_btrace_target::wait): Update.
* ravenscar-thread.c (struct ravenscar_thread_target) <wait>:
Update.
(ravenscar_thread_target::wait): Update.
* procfs.c (class procfs_target) <wait>: Update.
(procfs_target::wait): Update.
* obsd-nat.h (class obsd_nat_target) <wait>: Update.
* obsd-nat.c (obsd_nat_target::wait): Update.
* nto-procfs.c (struct nto_procfs_target) <wait>: Update.
(nto_procfs_target::wait): Update.
* nbsd-nat.h (struct nbsd_nat_target) <wait>: Update.
* nbsd-nat.c (nbsd_wait): Change type of "options".
(nbsd_nat_target::wait): Update.
* linux-thread-db.c (class thread_db_target) <wait>: Update.
(thread_db_target::wait): Update.
* linux-nat.h (class linux_nat_target) <wait>: Update.
* linux-nat.c (linux_nat_target::wait): Update.
(linux_nat_wait_1): Update.
* infrun.c (do_target_wait_1, do_target_wait): Change type of
"options".
* inf-ptrace.h (struct inf_ptrace_target) <wait>: Update.
* inf-ptrace.c (inf_ptrace_target::wait): Update.
* go32-nat.c (struct go32_nat_target) <wait>: Update.
(go32_nat_target::wait): Update.
* gnu-nat.h (struct gnu_nat_target) <wait>: Update.
* gnu-nat.c (gnu_nat_target::wait): Update.
* fbsd-nat.h (class fbsd_nat_target) <wait>: Update.
* fbsd-nat.c (fbsd_nat_target::wait): Update.
* darwin-nat.h (class darwin_nat_target) <wait>: Update.
* darwin-nat.c (darwin_nat_target::wait): Update.
* bsd-uthread.c (struct bsd_uthread_target) <wait>: Update.
(bsd_uthread_target::wait): Update.
* aix-thread.c (class aix_thread_target) <wait>: Update.
(aix_thread_target::wait): Update.
gdbserver/ChangeLog
2020-09-18 Tom Tromey <tromey@adacore.com>
* netbsd-low.h (class netbsd_process_target) <wait>: Update.
* netbsd-low.cc (netbsd_waitpid, netbsd_wait)
(netbsd_process_target::wait): Change type of target_options.
* win32-low.h (class win32_process_target) <wait>: Update.
* win32-low.cc (win32_process_target::wait): Update.
* target.h (class process_stratum_target) <wait>: Update.
(mywait): Update.
* target.cc (mywait, target_wait): Change type of "options".
* linux-low.h (class linux_process_target) <wait, wait_1>:
Update.
* linux-low.cc (linux_process_target::wait)
(linux_process_target::wait_1): Update.
|
|
In non-stop mode, remote targets mark an async event source whose
callback is supposed to result in calling remote_target::wait_ns to
either process the event queue, or acknowledge an incoming %Stop
notification.
The callback in question is remote_async_inferior_event_handler, where
we call inferior_event_handler, to end up in fetch_inferior_event ->
target_wait -> remote_target::wait -> remote_target::wait_ns.
A problem here however is that when debugging multiple targets,
fetch_inferior_event can pull events out of any target picked at
random, for event fairness. This means that when
remote_async_inferior_event_handler returns, remote_target::wait may
have not been called at all, and thus pending notifications may have
not been acked. Because async event sources auto-clear, when
remote_async_inferior_event_handler returns the async event handler is
no longer marked, so the event loop won't automatically call
remote_async_inferior_event_handler again to try to process the
pending remote notifications/queue. The result is that stop events
may end up not processed, e.g., "interrupt -a" seemingly not managing
to stop all threads.
Fix this by making remote_async_inferior_event_handler mark the event
handler again before returning, if necessary.
Maybe a better fix would be to make async event handlers not
auto-clear themselves, make that the responsibility of the callback,
so that the event loop would keep calling the callback automatically.
Or, we could try making so that fetch_inferior_event would optionally
handle events only for the target that it got passed down via
parameter. However, I don't think now just before branching is the
time to try to do any such change.
gdb/ChangeLog:
PR gdb/26199
* remote.c (remote_target::open_1): Pass remote target pointer as
data to create_async_event_handler.
(remote_async_inferior_event_handler): Mark async event handler
before returning if the remote target still has either pending
events or unacknowledged notifications.
|
|
I noticed that fetch_inferior_event receives the client_data parameter
from its caller, inferior_event_handler, but doesn't actually need it.
This patch removes it. In turn, inferior_event_handler doesn't use its
parameter, so remove it too.
The `data` argument used when registering
remote_async_inferior_event_handler is changed to NULL, to avoid
confusion. It could make people think that the value passed is used
somewhere, when in fact it's not.
gdb/ChangeLog:
* inf-loop.c (inferior_event_handler): Remove client_data param.
* inf-loop.h (inferior_event_handler): Likewise.
* infcmd.c (step_1): Adjust.
* infrun.c (proceed): Adjust.
(fetch_inferior_event): Remove client_data param.
(infrun_async_inferior_event_handler): Adjust.
* infrun.h (fetch_inferior_event): Remove `void *` param.
* linux-nat.c (handle_target_event): Adjust.
* record-btrace.c (record_btrace_handle_async_inferior_event):
Adjust.
* record-full.c (record_full_async_inferior_event_handler):
Adjust.
* remote.c (remote_async_inferior_event_handler): Adjust.
Change-Id: I3c2aa1eb0ea3e0985df096660d2dcd794674f2ea
|
|
Currently, a user can define an alias, but cannot have default
arguments for this alias.
This patch modifies the 'alias' command so that default args can
be provided.
(gdb) h alias
Define a new command that is an alias of an existing command.
Usage: alias [-a] [--] ALIAS = COMMAND [DEFAULT-ARGS...]
ALIAS is the name of the alias command to create.
COMMAND is the command being aliased to.
Options:
-a
Specify that ALIAS is an abbreviation of COMMAND.
Abbreviations are not used in command completion..
GDB will automatically prepend the provided DEFAULT-ARGS to the list
of arguments explicitly provided when using ALIAS.
Use "help aliases" to list all user defined aliases and their default args.
Examples:
Make "spe" an alias of "set print elements":
alias spe set print elements
Make "elms" an alias of "elements" in the "set print" command:
alias -a set print elms set print elements
Make "btf" an alias of "backtrace -full -past-entry -past-main" :
alias btf = backtrace -full -past-entry -past-main
Make "wLapPeu" an alias of 2 nested "with":
alias wLapPeu = with language pascal -- with print elements unlimited --
(gdb)
The way 'default-args' is implemented makes it trivial to set default
args also for GDB commands (such as "backtrace") and for GDB pre-defined
aliases (such as "bt"). It was however deemed better to not allow to
define default arguments for pre-defined commands and aliases, to avoid
users believing that e.g. default args for "backtrace" would apply to "bt".
If needed, default-args could be allowed for GDB predefined commands
and aliases by adding a command
'set default-args GDB_COMMAND_OR_PREDEFINED_ALIAS [DEFAULT-ARGS...]'.
* 'alias' command now has a completer that helps to complete:
- ALIAS (if the user defines an alias after a prefix),
- the aliased COMMAND
- the possible options for the aliased COMMAND.
* Help and apropos commands show the definitions of the aliases
that have default arguments, e.g.
(gdb) help backtrace
backtrace, btf, where, bt
alias btf = backtrace -full -past-entry -past-main
Print backtrace of all stack frames, or innermost COUNT frames.
Usage: backtrace [OPTION]... [QUALIFIER]... [COUNT | -COUNT]
Options:
-entry-values no|only|preferred|if-needed|both|compact|default
Set printing of function arguments at function entry.
...
gdb/ChangeLog
2020-06-22 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (lookup_cmd_for_default_args)
(alias_command_completer)
(make_alias_options_def_group): New functions.
(alias_opts, alias_option_defs): New struct and array.
(alias_usage_error): Update usage.
(alias_command): Handles optional DEFAULT-ARGS... arguments.
Use option framework.
(_initialize_cli_cmds): Update alias command help.
Update aliases command help.
(show_user):
Add NULL for new default_args lookup_cmd argument.
(valid_command_p): Rename to validate_aliased_command.
Add NULL for new default_args lookup_cmd argument. Verify that the
aliased_command has no default args.
* cli/cli-decode.c (help_cmd): Show aliases definitions.
(lookup_cmd_1, lookup_cmd): New argument default_args.
(add_alias_cmd):
Add NULL for new default_args lookup_cmd argument.
(print_help_for_command): Show default args under the layout
alias some_alias = some_aliased_cmd some_alias_default_arg.
* cli/cli-decode.h (struct cmd_list_element): New member default_args.
xfree default_args in destructor.
* cli/cli-script.c (process_next_line, do_define_command):
Add NULL for new default_args lookup_cmd argument.
* command.h: Declare new default_args argument in lookup_cmd
and lookup_cmd_1.
* completer.c (complete_line_internal_1):
Add NULL for new default_args lookup_cmd or lookup_cmd_1 argument.
* guile/scm-cmd.c (gdbscm_parse_command_name): Likewise.
* guile/scm-param.c (add_setshow_generic, pascm_parameter_defined_p):
Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* python/py-auto-load.c (gdbpy_initialize_auto_load): Likewise.
* python/py-cmd.c (gdbpy_parse_command_name): Likewise.
* python/py-param.c (add_setshow_generic): Likewise.
* remote.c (_initialize_remote): Likewise.
* top.c (execute_command): Prepend default_args if command has some.
(set_verbose):
Add NULL for new default_args lookup_cmd or lookup_cmd_1 argument.
* tracepoint.c (validate_actionline, encode_actions_1):
Add NULL for new default_args lookup_cmd or lookup_cmd_1 argument.
|
|
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::remote_notice_new_inferior): Use
switch_to_thread instead of writing to inferior_ptid directly.
(remote_target::add_current_inferior_and_thread): Use
switch_to_no_thread instead of writing to inferior_ptid directly.
(extended_remote_target::attach): Use switch_to_inferior_no_thread
and switch_to_thread instead of using set_current_inferior or
writing to inferior_ptid directly.
|
|
I was inspired by a series of patches merged by Alan Modra in the other
projects, so I did the same in GDB with a bit of Coccinelle and grep.
This patch removes the unnecessary NULL checks before calls to xfree.
They are unnecessary because xfree already does a NULL check. Since
free is supposed to handle NULL values correctly, the NULL check in
xfree itself is also questionable, but I've left it there for now.
gdb/ChangeLog:
* coffread.c (patch_type): Remove NULL check before xfree.
* corefile.c (set_gnutarget): Likewise.
* cp-abi.c (set_cp_abi_as_auto_default): Likewise.
* exec.c (build_section_table): Likewise.
* remote.c (remote_target::pass_signals): Likewise.
* utils.c (n_spaces): Likewise.
* cli/cli-script.c (document_command): Likewise.
* i386-windows-tdep.c (core_process_module_section): Likewise.
* linux-fork.c (struct fork_info) <~fork_info>: Likewise.
|
|
Instead of maintaining two vectors, I added a small `segment` class
which holds both the base address and size of one segment and replaced
the two `segment_bases` and `segment_sizes` arrays with a single vector.
The rest of the changes are straightforward, no behavior changes are
expected.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data) <struct segment>: New.
<segments>: New.
<segment_bases, segment_sizes>: Remove.
* symfile.c (default_symfile_segments): Update.
* elfread.c (elf_symfile_segments): Update.
* remote.c (remote_target::get_offsets): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Update.
|
|
- Allocate this structure with new instead of XNEW, use a unique pointer
to manage its lifetime.
- Change a few functions to return a unique pointer instead of a
plain pointer.
- Change free_symfile_segment_data to be symfile_segment_data's
destructor.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data): Initialize fields.
<~symfile_segment_data>: Add.
(symfile_segment_data_up): New.
(struct sym_fns) <sym_segments>: Return a
symfile_segment_data_up.
(default_symfile_segments): Return a symfile_segment_data_up.
(free_symfile_segment_data): Remove.
(get_symfile_segment_data): Return a symfile_segment_data_up.
* symfile.c (default_symfile_segments): Likewise.
(get_symfile_segment_data): Likewise.
(free_symfile_segment_data): Remove.
(symfile_find_segment_sections): Update.
* elfread.c (elf_symfile_segments): Return a
symfile_segment_data_up.
* remote.c (remote_target::get_offsets): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Update.
* symfile-debug.c (debug_sym_segments): Return a
symfile_segment_data_up.
|
|
The next commit updates command-def-selftests.c to detect missing
or wrong prefix commands in a list of subcommands.
This command structure selftest detects a series of problems
that are fixed by this commit.
Many commands have a null prefix command, e.g.
(gdb) maintenance selftest command_str
Running selftest command_structure_invariants.
list 0x560417949cb8 reachable via prefix 'append binary '. command 'memory' has null prefixcmd
list 0x560417949cb8 reachable via prefix 'append binary '. command 'value' has null prefixcmd
...
Most of these are fixed by the following changes:
* do_add_cmd searches the prefix command having the list
in which the command is added.
This ensures that a command defined after its prefix command
gets the correct prefix command.
* Due to the GDB initialization order, a GDB file can define
a subcommand before the prefix command is defined.
So, have add_prefix_cmd calling a new recursive function
'update_prefix_field_of_prefix_commands' to set the prefix
command of all sub-commands that are now reachable from
this newly defined prefix command. Note that this recursive
call replaces the function 'set_prefix_cmd' that was providing
a partial solution to this problem.
Following that, 2 python commands (defined after all the other GDB
commands) got a wrong prefix command, e.g. "info frame-filter" has
as prefix command the "i" alias of "info". This is fixed by having
lookup_cmd_for_prefixlist returning the aliased command rather than
the alias.
After that, one remaining problem:
(gdb) maintenance selftest command_str
Running selftest command_structure_invariants.
list 0x55f320272298 reachable via prefix 'set remote '. command 'system-call-allowed' has null prefixcmd
Self test failed: self-test failed at ../../classfix/gdb/unittests/command-def-selftests.c:196
Ran 1 unit tests, 1 failed
(gdb)
Caused by initialize_remote_fileio that was taking the address of
its arguments remote_set_cmdlist and remote_show_cmdlist instead
of receiving the correct values to use as list.
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.c (lookup_cmd_for_prefix): Return the aliased command
as prefix, not one of its aliases.
(set_cmd_prefix): Remove.
(do_add_cmd): Centralize the setting of the prefix of a command, when
command is defined after its full chain of prefix commands.
(add_alias_cmd): Remove call to set_cmd_prefix, as do_add_cmd does it.
(add_setshow_cmd_full): Likewise.
(update_prefix_field_of_prefixed_commands): New function.
(add_prefix_cmd): Replace non working call to set_cmd_prefix by
update_prefix_field_of_prefixed_commands.
* gdb/remote-fileio.c (initialize_remote_fileio): Use the real
addresses of remote_set_cmdlist and remote_show_cmdlist given
as argument, not the address of an argument.
* gdb/remote-fileio.h (initialize_remote_fileio): Likewise.
* gdb/remote.c (_initialize_remote): Likewise.
|
|
In stop_all_threads, GDB sends signals to other threads in an attempt
to stop them. While in a typical scenario the expected wait status is
TARGET_WAITKIND_STOPPED, it is possible that the thread GDB attempted
to stop has already terminated. If so, a waitstatus other than
TARGET_WAITKIND_STOPPED would be received. Handle this case
appropriately.
If a wait status that denotes thread termination is ignored, GDB goes
into an infinite loop in stop_all_threads.
E.g.:
$ gdb ./a.out
(gdb) start
...
(gdb) add-inferior -exec ./a.out
...
(gdb) inferior 2
...
(gdb) start
...
(gdb) set schedule-multiple on
(gdb) set debug infrun 2
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 10449)
infrun: clear_proceed_status_thread (process 10453)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 10449
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 10449] at 0x55555555514e
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: proceed: resuming process 10453
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 10453] at 0x55555555514e
infrun: prepare_to_wait
infrun: Found 2 inferiors, starting at #0
infrun: target_wait (-1.0.0, status) =
infrun: 10449.10449.0 [process 10449],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 1 (process 10449) exited normally]
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 10453 executing, need stop
infrun: target_wait (-1.0.0, status) =
infrun: 10453.10453.0 [process 10453],
infrun: status->kind = exited, status = 0
infrun: stop_all_threads status->kind = exited, status = 0 process 10453
infrun: process 10453 executing, already stopping
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = no-resumed
infrun: infrun_async(0)
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
...
And this polling goes on forever. This patch prevents the infinite
looping behavior. For the same scenario above, we obtain the
following behavior:
...
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 31229)
infrun: clear_proceed_status_thread (process 31233)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 31229
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 31229] at 0x55555555514e
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: proceed: resuming process 31233
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 31233] at 0x55555555514e
infrun: prepare_to_wait
infrun: Found 2 inferiors, starting at #0
infrun: target_wait (-1.0.0, status) =
infrun: 31229.31229.0 [process 31229],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 1 (process 31229) exited normally]
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 31233 executing, need stop
infrun: target_wait (-1.0.0, status) =
infrun: 31233.31233.0 [process 31233],
infrun: status->kind = exited, status = 0
infrun: stop_all_threads status->kind = exited, status = 0 process 31233
infrun: saving status status->kind = exited, status = 0 for 31233.31233.0
infrun: process 31233 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 31233 not executing
infrun: stop_all_threads done
(gdb)
The exit event from Inferior 1 is received and shown to the user.
The exit event from Inferior 2 is not displayed, but kept pending.
(gdb) info inferiors
Num Description Connection Executable
* 1 <null> a.out
2 process 31233 1 (native) a.out
(gdb) inferior 2
[Switching to inferior 2 [process 31233] (a.out)]
[Switching to thread 2.1 (process 31233)]
Couldn't get registers: No such process.
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 31233)
infrun: clear_proceed_status_thread: thread process 31233 has pending wait status status->kind = exited, status = 0 (currently_stepping=0).
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 31233
infrun: resume: thread process 31233 has pending wait status status->kind = exited, status = 0 (currently_stepping=0).
infrun: prepare_to_wait
infrun: Using pending wait status status->kind = exited, status = 0 for process 31233.
infrun: target_wait (-1.0.0, status) =
infrun: 31233.31233.0 [process 31233],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 2 (process 31233) exited normally]
infrun: stop_waiting
(gdb) info inferiors
Num Description Connection Executable
1 <null> a.out
* 2 <null> a.out
(gdb)
When a process exits and we leave the process exit event pending, we
need to make sure that at least one thread is left listed in the
inferior's thread list. This is necessary in order to make sure we
have a thread that we can later resume, so the process exit event can
be collected/reported.
When native debugging, the GNU/Linux back end already makes sure that
the last LWP isn't deleted.
When remote debugging against GNU/Linux GDBserver, the GNU/Linux
GDBserver backend also makes sure that the last thread isn't deleted
until the process exit event is reported to GDBserver core.
However, between the backend reporting the process exit event to
GDBserver core, and GDB consuming the event, GDB may update the thread
list and find no thread left in the process. The process exit event
will be pending somewhere in GDBserver's stop reply queue, or
gdb/remote.c's queue, or whathever other event queue inbetween
GDBserver and infrun.c's handle_inferior_event.
This patch tweaks remote.c's target_update_thread_list implementation
to avoid deleting the last thread of an inferior.
In the past, this case of inferior-with-no-threads led to a special
case at the bottom of handle_no_resumed, where it reads:
/* Note however that we may find no resumed thread because the whole
process exited meanwhile (thus updating the thread list results
in an empty thread list). In this case we know we'll be getting
a process exit event shortly. */
for (inferior *inf : all_non_exited_inferiors (ecs->target))
In current master, that code path is still reachable with the
gdb.threads/continue-pending-after-query.exp testcase, when tested
against GDBserver, with "maint set target-non-stop" forced "on".
With this patch, the scenario that loop was concerned about is still
properly handled, because the loop above it finds the process's last
thread with "executing" set to true, and thus the handle_no_resumed
function still returns true.
Since GNU/Linux native and remote are the only targets that support
non-stop mode, and with this patch, we always make sure the inferior
has at least one thread, this patch also removes that "inferior with
no threads" special case handling from handle_no_resumed.
Since remote.c now has a special case where we treat a thread that has
already exited as if it was still alive, we might need to tweak
remote.c's target_thread_alive implementation to return true for that
thread without querying the remote side (which would say "no, not
alive"). After inspecting all the target_thread_alive calls in the
codebase, it seems that only the one from prune_threads could result
in that thread being accidentally deleted. There's only one call to
prune_threads in GDB's common code, so this patch handles this by
replacing the prune_threads call with a delete_exited_threads call.
This seems like an improvement anyway, because we'll still be doing
what the comment suggests we want to do, and, we avoid remote protocol
traffic.
Regression-tested on X86_64 Linux.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Tom de Vries <tdevries@suse.de>
Pedro Alves <palves@redhat.com>
PR threads/25478
* infrun.c (stop_all_threads): Do NOT ignore
TARGET_WAITKIND_NO_RESUMED, TARGET_WAITKIND_THREAD_EXITED,
TARGET_WAITKIND_EXITED, TARGET_WAITKIND_SIGNALLED wait statuses
received.
(handle_no_resumed): Remove code handling a live inferior with no
threads.
* remote.c (has_single_non_exited_thread): New.
(remote_target::update_thread_list): Do not delete a thread if is
the last thread of the process.
* thread.c (thread_select): Call delete_exited_threads instead of
prune_threads.
gdb/testsuite/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* gdb.multi/multi-exit.c: New file.
* gdb.multi/multi-exit.exp: New file.
* gdb.multi/multi-kill.c: New file.
* gdb.multi/multi-kill.exp: New file.
|
|
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
|
|
This moves event-loop.[ch] to gdbsupport/ and updates the uses in gdb.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* run-on-main-thread.c: Update include.
* unittests/main-thread-selftests.c: Update include.
* tui/tui-win.c: Update include.
* tui/tui-io.c: Update include.
* tui/tui-interp.c: Update include.
* tui/tui-hooks.c: Update include.
* top.h: Update include.
* top.c: Update include.
* ser-base.c: Update include.
* remote.c: Update include.
* remote-notif.c: Update include.
* remote-fileio.c: Update include.
* record-full.c: Update include.
* record-btrace.c: Update include.
* python/python.c: Update include.
* posix-hdep.c: Update include.
* mingw-hdep.c: Update include.
* mi/mi-main.c: Update include.
* mi/mi-interp.c: Update include.
* main.c: Update include.
* linux-nat.c: Update include.
* interps.c: Update include.
* infrun.c: Update include.
* inf-loop.c: Update include.
* event-top.c: Update include.
* event-loop.c: Move to ../gdbsupport/.
* event-loop.h: Move to ../gdbsupport/.
* async-event.h: Update include.
* Makefile.in (COMMON_SFILES, HFILES_NO_SRCDIR): Update.
gdbsupport/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* event-loop.h: Move from ../gdb/.
* event-loop.cc: Move from ../gdb/.
|
|
This patch splits out some gdb-specific code from event-loop, into new
files async-event.[ch]. Strictly speaking this code could perhaps be
put into gdbsupport/, but because gdbserver does not currently use it,
it seemed better, for size reasons, to split it out.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* tui/tui-win.c: Include async-event.h.
* remote.c: Include async-event.h.
* remote-notif.c: Include async-event.h.
* record-full.c: Include async-event.h.
* record-btrace.c: Include async-event.h.
* infrun.c: Include async-event.h.
* event-top.c: Include async-event.h.
* event-loop.h: Move some declarations to async-event.h.
* event-loop.c: Don't include ser-event.h or top.h. Move some
code to async-event.c.
* async-event.h: New file.
* async-event.c: New file.
* Makefile.in (COMMON_SFILES): Add async-event.c.
(HFILES_NO_SRCDIR): Add async-event.h.
|
|
A gdbserver does not report a ptid in a 'W' or 'X' packet if multi-process
extensions are not supported or turned off. See
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#multiprocess-extensions
https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html#Stop-Reply-Packets
GDB's remote packet parser checks for whether a stop-reply packet
contains a ptid if the target is non-stop, and issues an error if no
ptid is included:
if (target_is_non_stop_p () && event->ptid == null_ptid)
error (_("No process or thread specified in stop reply: %s"), buf);
This leads to the following error when the non-stop
mode is turned on but multi-process extensions are off:
$ gdb
(gdb) set non-stop on
(gdb) set remote multiprocess-feature-packet off
(gdb) target remote | gdbserver - ./foo
Remote debugging using | gdbserver - ./foo
stdin/stdout redirected
Process ./foo created; pid = 3712
...
(gdb) continue
Continuing.
...
No process or thread specified in stop reply: W2a
(gdb)
Because the check is done for stop reply packets in general, a similar
situation occurs if the 'T' or 'Tthread' packet is disabled in
gdbserver (i.e. via --disable-packet=T). E.g:
$ gdb
(gdb) set non-stop on
(gdb) target remote | gdbserver --disable-packet=Tthread - ./foo
...
No process or thread specified in stop reply: T0506:0000000000000000;07:10e2ffffff7f0000;10:9060ddf7ff7f0000;
or
$ gdb
(gdb) set non-stop on
(gdb) target remote | gdbserver --disable-packet=T - ./foo
...
No process or thread specified in stop reply: S05
The commit
commit cada5fc921e39a1945c422eea055c8b326d8d353
Date: Wed Mar 11 12:30:13 2020 +0000
gdb: Handle W and X remote packets without giving a warning
and its predecessor
commit 24ed6739b699f329c2c45aedee5f8c7d2f54e493
Date: Thu Jan 30 14:35:40 2020 +0000
gdb/remote: Restore support for 'S' stop reply packet
added warnings for when GDB has to make a guess for a missing ptid in
case of multiple threads/inferiors. These warnings should suffice.
So, the simple solution is to remove the check completely.
Regression-tested on X86_64 Linux.
gdb/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* remote.c (remote_target::remote_parse_stop_reply): Remove the
check for no ptid in the stop reply when the target is non-stop.
gdb/testsuite/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.server/stop-reply-no-thread.exp: Enhance the test
scenario to cover execution until the end and also the case
when no packet is disabled when starting gdbserver.
|
|
Change parameters and return value of the various follow_fork
functions/methods from int to bool.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_nat_target::follow_fork): Change bool to int.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
* inf-ptrace.c (inf_ptrace_target::follow_fork): Likewise.
* inf-ptrace.h (struct inf_ptrace_target) <follow_fork>: Likewise.
* infrun.c (follow_fork): Likewise.
(follow_fork_inferior): Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Likewise.
* linux-nat.h (class linux_nat_target): Likewise.
* remote.c (class remote_target) <follow_fork>: Likewise.
(remote_target::follow_fork): Likewise.
* target-delegates.c: Re-generate.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* target.h (struct target_ops) <follow_fork>: Likewise.
(target_follow_fork): Likewise.
|
|
In this commit:
commit 24ed6739b699f329c2c45aedee5f8c7d2f54e493
Date: Thu Jan 30 14:35:40 2020 +0000
gdb/remote: Restore support for 'S' stop reply packet
A regression was introduced such that the W and X packets would give a
warning in some cases. The warning was:
warning: multi-threaded target stopped without sending a thread-id, using first non-exited thread
This problem would arise when:
1. The multi-process extensions to the remote protocol were not
being used, and
2. The inferior has multiple threads.
In this case when the W (or X) packet arrives the ptid of the
stop_reply is set to null_ptid, then when we arrive in
process_stop_reply GDB spots that we have multiple non-exited theads,
but the stop event didn't specify a thread-id.
The problem with this is that the W (and X) packets are actually
process wide events, they apply to all threads. So not specifying a
thread-id is not a problem, in fact, the best these packets allow is
for the remote to specify a process-id, not a thread-id.
If we look at how the W (and X) packets deal with a specified
process-id, then what happens is GDB sets to stop_reply ptid to a
value which indicates all threads in the process, this is done by
creating a value `ptid_t (pid)`, which sets the pid field of the
ptid_t, but leaves the tid field as 0, indicating all threads.
So, this commit does the same thing for the case where there is not
process-id specified. In process_stop_reply we not distinguish
between stop events that apply to all threads, and those that apply to
only one. If the stop event applies to only one thread then we treat
it as before. If, however, the stop event applies to all threads,
then we find the first non-exited thread, and use the pid from this
thread to create a `ptid_t (pid)` value.
If the target has multiple inferiors, and receives a process wide
event without specifying a process-id GDB now gives this warning:
warning: multi-inferior target stopped without sending a process-id, using first non-exited inferior
gdb/ChangeLog:
* remote.c (remote_target::process_stop_reply): Handle events for
all threads differently.
gdb/testsuite/ChangeLog:
* gdb.server/exit-multiple-threads.c: New file.
* gdb.server/exit-multiple-threads.exp: New file.
|
|
A few spots in gdb use sprintf_vma to print a CORE_ADDR. This will
fail on a 32-bit build once CORE_ADDR is always a 64-bit type.
This patch replaces these calls with phex instead.
gdb/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* remote.c (remote_target::download_tracepoint)
(remote_target::enable_tracepoint)
(remote_target::disable_tracepoint): Use phex, not sprintf_vma.
* breakpoint.c (print_recreate_masked_watchpoint): Use phex, not
sprintf_vma.
|
|
With this commit:
commit 5b6d1e4fa4fc6827c7b3f0e99ff120dfa14d65d2
Date: Fri Jan 10 20:06:08 2020 +0000
Multi-target support
There was a regression in GDB's support for older aspects of the
remote protocol. Specifically, when a target sends the 'S' stop reply
packet (which doesn't include a thread-id) then GDB has to figure out
which thread actually stopped.
Before the above commit GDB figured this out by using inferior_ptid in
process_stop_reply, which contained the ptid of the current
process/thread. This would be fine for single threaded
targets (which is the only place using an S packet makes sense), but
in the general case, relying on inferior_ptid for processing a stop is
wrong - there's no reason to believe that what was GDB's current
thread will be the same thread that just stopped in the target.
With the above commit the inferior_ptid now has the value null_ptid
inside process_stop_reply, this can be seen in do_target_wait, where
we call switch_to_inferior_no_thread before calling do_target_wait_1.
The problem this causes can be seen in the new test that runs
gdbserver using the flag --disable-packet=T, and causes GDB to throw
this assertion:
inferior.c:279: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
A similar problem was fixed in this commit:
commit 3cada74087687907311b52781354ff551e10a0ed
Date: Thu Jan 11 00:23:04 2018 +0000
Fix backwards compatibility with old GDBservers (PR remote/22597)
However, this commit deals with the case where the T packet doesn't
include a thread-id, not the S packet case. This commit solves the
problem providing a thread-id at the GDB side if the remote target
doesn't provide one. The thread-id provided comes from
remote_state::general_thread, however, though this does work, I don't
think it is the ideal solution.
The remote_state tracks two threads, the continue_thread and the
general_thread, these are updated when GDB asks the remote target to
switch threads. The general_thread is set before performing things
like register or memory accesses, and the continue_thread is set
before things like continue or step commands. Further, the
general_thread is updated after a target stops to reference the thread
that stopped.
The first thing to note from the above description is that we have a
cycle of dependency, when a T packet arrives without a thread-id we
fill in the thread-id from the general_thread data. The thread-id
from the stop event is then used to set the general_thread. This in
itself feels a little weird.
The second question is why use the general_thread at all? You'd think
given how they are originally set that the continue thread would be a
better choice. The problem with this is that the continue_thread, if
the user just does "continue", will be set to the minus_one_ptid, in
the remote protocol this means all threads. When the stop arrives
with no thread-id and we use continue_thread we end up with a very
similar assertion to before because we now end up trying to lookup a
thread using the minus_one_ptid. By contrast, once GDB has connected
to a remote target the general_thread will be set to a valid
thread-id, after which, if the target is single threaded, and stop
events arrive without a thread-id, everything works fine.
There is one slight weirdness with the above behaviour though. When
GDB first connects to the remote target inferior_ptid is null_ptid,
however, upon connecting we query the remote for its threads. As the
thread information arrives GDB adds the threads to its internal
database, and this process involves setting inferior_ptid to the id of
each new thread in turn. Once we know about all the threads we wait
for a stop event from the remote target to indicate that GDB is now in
control of the target.
The problem is that after adding the new threads we don't reset
inferior_ptid, and the code path we use to wait for a stop event from
the target also doesn't reset inferior_ptid, so it turns out that
during the initial connection inferior_ptid is not null_ptid. This is
lucky, because during the initial connection the general_thread
variable _is_ set to null_ptid.
So, during the initial connection, if the first stop event is missing
a thread-id then we "provide" a thead-id from general_thread. This
turns out to be null_ptid meaning no thread-id is known, and then
during process_stop_reply we fill in the missing thread-id using
inferior_ptid.
This was all discussed on the mailing list here:
https://sourceware.org/ml/gdb-patches/2020-02/msg01011.html
My proposal for a fix then is:
1. Move the call to switch_to_inferior_no_thread into
do_target_wait_1, this means that in all cases where we are waiting
for an inferior the inferior_ptid will be set to null_ptid. This is
good as no wait code should rely on inferior_ptid.
2. Remove the use of general_thread from the 'T' packet processing.
The general_thread read here was only ever correct by chance, and we
shouldn't be using it this way.
3. Remove use of inferior_ptid from process_stop_event as this is
wrong, and will always be null_ptid now anyway.
4. When a stop_event has null_ptid due to a lack of thread-id (either
from a T packet or an S packet) then pick the first non exited thread
in the target and use that. This will be fine for single threaded
targets. A multi-thread or multi-inferior aware remote target
should be using T packets with a thread-id, so we give a warning if
the target is multi-threaded, and we are still missing a thread-id.
5. Extend the existing test that covered the T packet with missing
thread-id to also cover the S packet.
gdb/ChangeLog:
* remote.c (remote_target::remote_parse_stop_reply): Don't use the
general_thread if the stop reply is missing a thread-id.
(remote_target::process_stop_reply): Use the first non-exited
thread if the target didn't pass a thread-id.
* infrun.c (do_target_wait): Move call to
switch_to_inferior_no_thread to ....
(do_target_wait_1): ... here.
gdb/testsuite/ChangeLog:
* gdb.server/stop-reply-no-thread.exp: Add test where T packet is
disabled.
|
|
This removes ui_file_isatty, ui_file_read, ui_file_write,
ui_file_write_async_safe, ui_file_flush, and ui_file_puts, replacing
them with calls to the appropriate method instead.
gdb/ChangeLog
2020-02-11 Tom Tromey <tromey@adacore.com>
* remote.c (remote_console_output): Update.
* printcmd.c (printf_command): Update.
* event-loop.c (gdb_wait_for_event): Update.
* linux-nat.c (sigchld_handler): Update.
* remote-sim.c (gdb_os_write_stdout): Update.
(gdb_os_flush_stdout): Update.
(gdb_os_flush_stderr): Update.
(gdb_os_write_stderr): Update.
* exceptions.c (print_exception): Update.
* remote-fileio.c (remote_fileio_func_read): Update.
(remote_fileio_func_write): Update.
* tui/tui.c (tui_enable): Update.
* tui/tui-interp.c (tui_interp::init): Update.
* utils.c (init_page_info): Update.
(putchar_unfiltered, fputc_unfiltered): Update.
(gdb_flush): Update.
(emit_style_escape): Update.
(flush_wrap_buffer, fputs_maybe_filtered): Update.
* ui-file.c (ui_file_isatty, ui_file_read, ui_file_write)
(ui_file_write_async_safe, ui_file_flush, ui_file_puts): Remove.
(stderr_file::write): Update.
(stderr_file::puts): Update.
* ui-file.h (ui_file_isatty, ui_file_write)
(ui_file_write_async_safe, ui_file_read, ui_file_flush)
(ui_file_puts): Don't declare.
Change-Id: I3ca9b36e9107f6adbc41e014f5078b41d6bcec4d
|
|
This patch redefines fputs_unfiltered in utils.c, with new behavior to
forward parameters to fputs_maybe_filtered. This makes
fputs_unfiltered identical to fputs_filtered, except filtering is
disabled.
Some callers of fputs_unfiltered have been updated to use ui_file_puts
where they were using other ui_file_* functions anyway for IO.
This fixes the problem I saw with \032\032post-prompt annotation being
flushed to stdout in the wrong order.
2020-02-05 Iain Buclaw <ibuclaw@gdcproject.org>
PR gdb/25190:
* gdb/remote-sim.c (gdb_os_write_stderr): Update.
* gdb/remote.c (remote_console_output): Update.
* gdb/ui-file.c (fputs_unfiltered): Rename to...
(ui_file_puts): ...this.
* gdb/ui-file.h (ui_file_puts): Add declaration.
* gdb/utils.c (emit_style_escape): Update.
(flush_wrap_buffer): Update.
(fputs_maybe_filtered): Update.
(fputs_unfiltered): Add function.
Change-Id: I17ed5078f71208344f2f8ab634a6518b1af6e213
|
|
This changes gdb_flush to also flush the internal wrap buffer. A few
places needed to continue using the previous approach, so this also
introduces ui_file_flush for those.
2020-02-05 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb/event-loop.c (gdb_wait_for_event): Update.
* gdb/printcmd.c (printf_command): Update.
* gdb/remote-fileio.c (remote_fileio_func_write): Update.
* gdb/remote-sim.c (gdb_os_flush_stdout): Update.
(gdb_os_flush_stderr): Update.
* gdb/remote.c (remote_console_output): Update.
* gdb/ui-file.c (gdb_flush): Rename to...
(ui_file_flush): ...this.
(stderr_file::write): Update.
(stderr_file::puts): Update.
* gdb/ui-file.h (gdb_flush): Rename to...
(ui_file_flush): ...this.
* gdb/utils.c (gdb_flush): Add function.
* gdb/utils.h (gdb_flush): Add declaration.
Change-Id: I7ca143d30f03dc39f218f6e880eb9bca9e15af39
|
|
Switch thread_info::resumed to bool (thread_info::executing already is a bool),
and try to change everything more or less related to that to consistently use
true/false instead of 1/0.
gdb/ChangeLog:
* fork-child.c (gdb_startup_inferior): Use bool instead of int.
* gdbthread.h (class thread_info) <resumed>: Likewise.
* infrun.c (resume_1): Likewise.
(proceed): Likewise.
(infrun_thread_stop_requested): Likewise.
(stop_all_threads): Likewise.
(handle_inferior_event): Likewise.
(restart_threads): Likewise.
(finish_step_over): Likewise.
(keep_going_stepped_thread): Likewise.
* linux-nat.c (attach_proc_task_lwp_callback): Likewise.
(linux_handle_extended_wait): Likewise.
* record-btrace.c (get_thread_current_frame_id): Likewise.
* record-full.c (record_full_wait_1): Likewise.
* remote.c (remote_target::process_initial_stop_replies): Likewise.
* target.c (target_resume): Likewise.
* thread.c (set_running_thread): Likewise.
|
|
This option allows to tell GDB to detect and possibly handle mismatched exec-files.
A recurrent problem with GDB is that GDB uses the wrong exec-file
when using the attach/detach commands successively.
Also, in case the user specifies a file on the command line but attaches
to the wrong PID, this error is not made visible and gives a not user
understandable behaviour.
For example:
$ gdb
...
(gdb) atta 2682 ############################################ PID running 'sleepers' executable
Attaching to process 2682
[New LWP 2683]
[New LWP 2684]
[New LWP 2685]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) det
Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682
[Inferior 1 (process 2682) detached]
(gdb) atta 31069 ############################################ PID running 'gdb' executable
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
Reading symbols from /lib64/ld-linux-x86-64.so.2...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in ?? ()
(gdb) bt
#0 0x00007f43c23478a0 in ?? ()
#1 0x0000558909e3ad91 in ?? ()
#2 0x0000202962646700 in ?? ()
#3 0x00007ffc69c74e70 in ?? ()
#4 0x000055890c1d2350 in ?? ()
#5 0x0000000000000000 in ?? ()
(gdb)
The second attach has kept the executable of the first attach.
(in this case, 31069 is the PID of a GDB, that has nothing to do
with the first determined 'sleepers' executable).
Similarly, if specifying an executable, but attaching to a wrong pid,
we get:
gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
...
Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers...
(gdb) atta 31069 ############################################ PID running 'gdb' executable
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
Reading symbols from /lib64/ld-linux-x86-64.so.2...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in ?? ()
(gdb) bt
#0 0x00007f43c23478a0 in ?? ()
#1 0x0000558909e3ad91 in ?? ()
#2 0x0000202962646700 in ?? ()
#3 0x00007ffc69c74e70 in ?? ()
#4 0x000055890c1d2350 in ?? ()
#5 0x0000000000000000 in ?? ()
(gdb)
And it is unclear to the user what has happened/what is going wrong.
This patch series implements a new option:
(gdb) apropos exec-file-mismatch
set exec-file-mismatch -- Set exec-file-mismatch handling (ask|warn|off).
show exec-file-mismatch -- Show exec-file-mismatch handling (ask|warn|off).
(gdb) help set exec-file-mismatch
Set exec-file-mismatch handling (ask|warn|off).
Specifies how to handle a mismatch between the current exec-file name
loaded by GDB and the exec-file name automatically determined when attaching
to a process:
ask - warn the user and ask whether to load the determined exec-file.
warn - warn the user, but do not change the exec-file.
off - do not check for mismatch.
"ask" means: in case of mismatch between the current exec-file name
and the automatically determined exec-file name of the PID we are attaching to,
give a warning to the user and ask whether to load the automatically determined
exec-file.
"warn" means: in case of mismatch, just give a warning to the user.
"off" means: do not check for mismatch.
This fixes PR gdb/17626.
There was a previous trial to fix this PR.
See https://sourceware.org/ml/gdb-patches/2015-07/msg00118.html
This trial was however only fixing the problem for the automatically
determined executable files when doing attach.
It was differentiating the 'user specified executable files' ("sticky")
from the executable files automatically found by GDB.
But such user specified sticky executables are in most cases due
to a wrong manipulation by the user, giving unexpected results
such as backtrace showing no function like in the above example.
This patch ensures that whenever a process executable can be
determined, that the user is warned if there is a mismatch.
The same tests as above then give:
(gdb) atta 2682
Attaching to process 2682
[New LWP 2683]
[New LWP 2684]
[New LWP 2685]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) det
Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682
[Inferior 1 (process 2682) detached]
(gdb) atta 31069
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y
Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb...
Setting up the environment for debugging gdb.
...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(top-gdb) bt
During symbol reading: incomplete CFI data; unspecified registers (e.g., rax) at 0x7f43c23478ad
During symbol reading: unsupported tag: 'DW_TAG_unspecified_type'
During symbol reading: cannot get low and high bounds for subprogram DIE at 0x12282a7
During symbol reading: Child DIE 0x12288ba and its abstract origin 0x1228b26 have different parents
During symbol reading: DW_AT_call_target target DIE has invalid low pc, for referencing DIE 0x1229540 [in module /bd/home/philippe/gdb/git/build_fixes/gdb/gdb]
#0 0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84
#1 0x0000558909e3ad91 in poll (__timeout=-1, __nfds=<optimized out>, __fds=<optimized out>) at /usr/include/x86_64-linux-gnu/bits/poll2.h:46
#2 gdb_wait_for_event (block=block@entry=1) at ../../fixes/gdb/event-loop.c:772
#3 0x0000558909e3aef4 in gdb_do_one_event () at ../../fixes/gdb/event-loop.c:347
#4 0x0000558909e3b085 in gdb_do_one_event () at ../../fixes/gdb/common/common-exceptions.h:219
#5 start_event_loop () at ../../fixes/gdb/event-loop.c:371
During symbol reading: Member function "~_Sp_counted_base" (offset 0x1c69bf7) is virtual but the vtable offset is not specified
During symbol reading: Multiple children of DIE 0x1c8f5a0 refer to DIE 0x1c8f0ee as their abstract origin
#6 0x0000558909ed3b78 in captured_command_loop () at ../../fixes/gdb/main.c:331
#7 0x0000558909ed4b6d in captured_main (data=<optimized out>) at ../../fixes/gdb/main.c:1174
#8 gdb_main (args=<optimized out>) at ../../fixes/gdb/main.c:1190
#9 0x0000558909c1e9a8 in main (argc=<optimized out>, argv=<optimized out>) at ../../fixes/gdb/gdb.c:32
(top-gdb)
gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
...
Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers...
(gdb) atta 31069
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y
Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb...
Setting up the environment for debugging gdb.
....
In other words, it now works as intuitively expected by the user.
If ever the user gave the correct executable on the command line,
then attached to the wrong pid, then confirmed loading the wrong executable,
the user can simply fix this by detaching, and attaching to the correct pid,
GDB will then tell again to the user that the exec-file might better
be loaded.
The default value of "ask" is chosen instead of e.g. "warn" as in most
cases, switching of executable will be the correct action,
and in any case, the user can decide to not load the executable,
as GDB asks a confirmation to the user to load the new executable.
For settings "ask" and "warn", the new function validate_exec_file ()
tries to get the inferior pid exec file and compares it with the current
exec file. In case of mismatch, it warns the user and optionally load
the executable.
This function is called in the attach_command implementation to cover
most cases of attaching to a running process.
It must also be called in remote.c, as the attach command is not supported
for all types of remote gdbserver.
gdb/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* exec.c (exec_file_mismatch_names, exec_file_mismatch_mode)
(show_exec_file_mismatch_command, set_exec_file_mismatch_command)
(validate_exec_file): New variables, enums, functions.
(exec_file_locate_attach, print_section_info): Style the filenames.
(_initialize_exec): Install show_exec_file_mismatch_command and
set_exec_file_mismatch_command.
* gdbcore.h (validate_exec_file): Declare.
* infcmd.c (attach_command): Call validate_exec_file.
* remote.c ( remote_target::remote_add_inferior): Likewise.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
This commit extends the CLI a bit for multi-target, in three ways.
#1 - New "info connections" command.
This is a new command that lists the open connections (process_stratum
targets). For example, if you're debugging two remote connections, a
couple local/native processes, and a core dump, all at the same time,
you might see something like this:
(gdb) info connections
Num What Description
1 remote 192.168.0.1:9999 Remote serial target in gdb-specific protocol
2 remote 192.168.0.2:9998 Remote serial target in gdb-specific protocol
* 3 native Native process
4 core Local core dump file
#2 - New "info inferiors" "Connection" column
You'll also see a new matching "Connection" column in "info
inferiors", showing you which connection an inferior is bound to:
(gdb) info inferiors
Num Description Connection Executable
1 process 18526 1 (remote 192.168.0.1:9999) target:/tmp/a.out
2 process 18531 2 (remote 192.168.0.2:9998) target:/tmp/a.out
3 process 19115 3 (native) /tmp/prog1
4 process 6286 4 (core) myprogram
* 5 process 19122 3 (native) /bin/hello
#3 - Makes "add-inferior" show the inferior's target connection
"add-inferior" now shows you the connection you've just bound the
inferior to, which is the current process_stratum target:
(gdb) add-inferior
[New inferior 2]
Added inferior 2 on connection 1 (extended-remote localhost:2346)
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add target-connection.c.
* inferior.c (uiout_field_connection): New function.
(print_inferior): Add new "connection-id" column.
(add_inferior_command): Show connection number/string of added
inferior.
* process-stratum-target.h
(process_stratum_target::connection_string): New virtual method.
(process_stratum_target::connection_number): New field.
* remote.c (remote_target::connection_string): New override.
* target-connection.c: New file.
* target-connection.h: New file.
* target.c (decref_target): Remove process_stratum targets from
the connection list.
(target_stack::push): Add process_stratum targets to the
connection list.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/kill-detach-inferiors-cmd.exp: Adjust expected output
of "add-inferior".
* gdb.base/quit-live.exp: Likewise.
* gdb.base/remote-exec-file.exp: Likewise.
* gdb.guile/scm-progspace.exp: Likewise.
* gdb.linespec/linespec.exp: Likewise.
* gdb.mi/new-ui-mi-sync.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
* gdb.multi/multi-target.exp (setup): Add "info connection" and
"info inferiors" tests.
* gdb.multi/remove-inferiors.exp: Adjust expected output of
"add-inferior".
* gdb.multi/watchpoint-multi.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.server/extended-remote-restart.exp: Likewise.
* gdb.threads/fork-plus-threads.exp: Adjust expected output of
"info inferiors".
* gdb.threads/forking-threads-plus-breakpoint.exp: Likewise.
* gdb.trace/report.exp: Likewise.
|
