| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A gdbserver does not report a ptid in a 'W' or 'X' packet if multi-process
extensions are not supported or turned off. See
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#multiprocess-extensions
https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html#Stop-Reply-Packets
GDB's remote packet parser checks for whether a stop-reply packet
contains a ptid if the target is non-stop, and issues an error if no
ptid is included:
if (target_is_non_stop_p () && event->ptid == null_ptid)
error (_("No process or thread specified in stop reply: %s"), buf);
This leads to the following error when the non-stop
mode is turned on but multi-process extensions are off:
$ gdb
(gdb) set non-stop on
(gdb) set remote multiprocess-feature-packet off
(gdb) target remote | gdbserver - ./foo
Remote debugging using | gdbserver - ./foo
stdin/stdout redirected
Process ./foo created; pid = 3712
...
(gdb) continue
Continuing.
...
No process or thread specified in stop reply: W2a
(gdb)
Because the check is done for stop reply packets in general, a similar
situation occurs if the 'T' or 'Tthread' packet is disabled in
gdbserver (i.e. via --disable-packet=T). E.g:
$ gdb
(gdb) set non-stop on
(gdb) target remote | gdbserver --disable-packet=Tthread - ./foo
...
No process or thread specified in stop reply: T0506:0000000000000000;07:10e2ffffff7f0000;10:9060ddf7ff7f0000;
or
$ gdb
(gdb) set non-stop on
(gdb) target remote | gdbserver --disable-packet=T - ./foo
...
No process or thread specified in stop reply: S05
The commit
commit cada5fc921e39a1945c422eea055c8b326d8d353
Date: Wed Mar 11 12:30:13 2020 +0000
gdb: Handle W and X remote packets without giving a warning
and its predecessor
commit 24ed6739b699f329c2c45aedee5f8c7d2f54e493
Date: Thu Jan 30 14:35:40 2020 +0000
gdb/remote: Restore support for 'S' stop reply packet
added warnings for when GDB has to make a guess for a missing ptid in
case of multiple threads/inferiors. These warnings should suffice.
So, the simple solution is to remove the check completely.
Regression-tested on X86_64 Linux.
gdb/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* remote.c (remote_target::remote_parse_stop_reply): Remove the
check for no ptid in the stop reply when the target is non-stop.
gdb/testsuite/ChangeLog:
2020-04-01 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.server/stop-reply-no-thread.exp: Enhance the test
scenario to cover execution until the end and also the case
when no packet is disabled when starting gdbserver.
|
|
Change parameters and return value of the various follow_fork
functions/methods from int to bool.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_nat_target::follow_fork): Change bool to int.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
* inf-ptrace.c (inf_ptrace_target::follow_fork): Likewise.
* inf-ptrace.h (struct inf_ptrace_target) <follow_fork>: Likewise.
* infrun.c (follow_fork): Likewise.
(follow_fork_inferior): Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Likewise.
* linux-nat.h (class linux_nat_target): Likewise.
* remote.c (class remote_target) <follow_fork>: Likewise.
(remote_target::follow_fork): Likewise.
* target-delegates.c: Re-generate.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* target.h (struct target_ops) <follow_fork>: Likewise.
(target_follow_fork): Likewise.
|
|
In this commit:
commit 24ed6739b699f329c2c45aedee5f8c7d2f54e493
Date: Thu Jan 30 14:35:40 2020 +0000
gdb/remote: Restore support for 'S' stop reply packet
A regression was introduced such that the W and X packets would give a
warning in some cases. The warning was:
warning: multi-threaded target stopped without sending a thread-id, using first non-exited thread
This problem would arise when:
1. The multi-process extensions to the remote protocol were not
being used, and
2. The inferior has multiple threads.
In this case when the W (or X) packet arrives the ptid of the
stop_reply is set to null_ptid, then when we arrive in
process_stop_reply GDB spots that we have multiple non-exited theads,
but the stop event didn't specify a thread-id.
The problem with this is that the W (and X) packets are actually
process wide events, they apply to all threads. So not specifying a
thread-id is not a problem, in fact, the best these packets allow is
for the remote to specify a process-id, not a thread-id.
If we look at how the W (and X) packets deal with a specified
process-id, then what happens is GDB sets to stop_reply ptid to a
value which indicates all threads in the process, this is done by
creating a value `ptid_t (pid)`, which sets the pid field of the
ptid_t, but leaves the tid field as 0, indicating all threads.
So, this commit does the same thing for the case where there is not
process-id specified. In process_stop_reply we not distinguish
between stop events that apply to all threads, and those that apply to
only one. If the stop event applies to only one thread then we treat
it as before. If, however, the stop event applies to all threads,
then we find the first non-exited thread, and use the pid from this
thread to create a `ptid_t (pid)` value.
If the target has multiple inferiors, and receives a process wide
event without specifying a process-id GDB now gives this warning:
warning: multi-inferior target stopped without sending a process-id, using first non-exited inferior
gdb/ChangeLog:
* remote.c (remote_target::process_stop_reply): Handle events for
all threads differently.
gdb/testsuite/ChangeLog:
* gdb.server/exit-multiple-threads.c: New file.
* gdb.server/exit-multiple-threads.exp: New file.
|
|
A few spots in gdb use sprintf_vma to print a CORE_ADDR. This will
fail on a 32-bit build once CORE_ADDR is always a 64-bit type.
This patch replaces these calls with phex instead.
gdb/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* remote.c (remote_target::download_tracepoint)
(remote_target::enable_tracepoint)
(remote_target::disable_tracepoint): Use phex, not sprintf_vma.
* breakpoint.c (print_recreate_masked_watchpoint): Use phex, not
sprintf_vma.
|
|
With this commit:
commit 5b6d1e4fa4fc6827c7b3f0e99ff120dfa14d65d2
Date: Fri Jan 10 20:06:08 2020 +0000
Multi-target support
There was a regression in GDB's support for older aspects of the
remote protocol. Specifically, when a target sends the 'S' stop reply
packet (which doesn't include a thread-id) then GDB has to figure out
which thread actually stopped.
Before the above commit GDB figured this out by using inferior_ptid in
process_stop_reply, which contained the ptid of the current
process/thread. This would be fine for single threaded
targets (which is the only place using an S packet makes sense), but
in the general case, relying on inferior_ptid for processing a stop is
wrong - there's no reason to believe that what was GDB's current
thread will be the same thread that just stopped in the target.
With the above commit the inferior_ptid now has the value null_ptid
inside process_stop_reply, this can be seen in do_target_wait, where
we call switch_to_inferior_no_thread before calling do_target_wait_1.
The problem this causes can be seen in the new test that runs
gdbserver using the flag --disable-packet=T, and causes GDB to throw
this assertion:
inferior.c:279: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
A similar problem was fixed in this commit:
commit 3cada74087687907311b52781354ff551e10a0ed
Date: Thu Jan 11 00:23:04 2018 +0000
Fix backwards compatibility with old GDBservers (PR remote/22597)
However, this commit deals with the case where the T packet doesn't
include a thread-id, not the S packet case. This commit solves the
problem providing a thread-id at the GDB side if the remote target
doesn't provide one. The thread-id provided comes from
remote_state::general_thread, however, though this does work, I don't
think it is the ideal solution.
The remote_state tracks two threads, the continue_thread and the
general_thread, these are updated when GDB asks the remote target to
switch threads. The general_thread is set before performing things
like register or memory accesses, and the continue_thread is set
before things like continue or step commands. Further, the
general_thread is updated after a target stops to reference the thread
that stopped.
The first thing to note from the above description is that we have a
cycle of dependency, when a T packet arrives without a thread-id we
fill in the thread-id from the general_thread data. The thread-id
from the stop event is then used to set the general_thread. This in
itself feels a little weird.
The second question is why use the general_thread at all? You'd think
given how they are originally set that the continue thread would be a
better choice. The problem with this is that the continue_thread, if
the user just does "continue", will be set to the minus_one_ptid, in
the remote protocol this means all threads. When the stop arrives
with no thread-id and we use continue_thread we end up with a very
similar assertion to before because we now end up trying to lookup a
thread using the minus_one_ptid. By contrast, once GDB has connected
to a remote target the general_thread will be set to a valid
thread-id, after which, if the target is single threaded, and stop
events arrive without a thread-id, everything works fine.
There is one slight weirdness with the above behaviour though. When
GDB first connects to the remote target inferior_ptid is null_ptid,
however, upon connecting we query the remote for its threads. As the
thread information arrives GDB adds the threads to its internal
database, and this process involves setting inferior_ptid to the id of
each new thread in turn. Once we know about all the threads we wait
for a stop event from the remote target to indicate that GDB is now in
control of the target.
The problem is that after adding the new threads we don't reset
inferior_ptid, and the code path we use to wait for a stop event from
the target also doesn't reset inferior_ptid, so it turns out that
during the initial connection inferior_ptid is not null_ptid. This is
lucky, because during the initial connection the general_thread
variable _is_ set to null_ptid.
So, during the initial connection, if the first stop event is missing
a thread-id then we "provide" a thead-id from general_thread. This
turns out to be null_ptid meaning no thread-id is known, and then
during process_stop_reply we fill in the missing thread-id using
inferior_ptid.
This was all discussed on the mailing list here:
https://sourceware.org/ml/gdb-patches/2020-02/msg01011.html
My proposal for a fix then is:
1. Move the call to switch_to_inferior_no_thread into
do_target_wait_1, this means that in all cases where we are waiting
for an inferior the inferior_ptid will be set to null_ptid. This is
good as no wait code should rely on inferior_ptid.
2. Remove the use of general_thread from the 'T' packet processing.
The general_thread read here was only ever correct by chance, and we
shouldn't be using it this way.
3. Remove use of inferior_ptid from process_stop_event as this is
wrong, and will always be null_ptid now anyway.
4. When a stop_event has null_ptid due to a lack of thread-id (either
from a T packet or an S packet) then pick the first non exited thread
in the target and use that. This will be fine for single threaded
targets. A multi-thread or multi-inferior aware remote target
should be using T packets with a thread-id, so we give a warning if
the target is multi-threaded, and we are still missing a thread-id.
5. Extend the existing test that covered the T packet with missing
thread-id to also cover the S packet.
gdb/ChangeLog:
* remote.c (remote_target::remote_parse_stop_reply): Don't use the
general_thread if the stop reply is missing a thread-id.
(remote_target::process_stop_reply): Use the first non-exited
thread if the target didn't pass a thread-id.
* infrun.c (do_target_wait): Move call to
switch_to_inferior_no_thread to ....
(do_target_wait_1): ... here.
gdb/testsuite/ChangeLog:
* gdb.server/stop-reply-no-thread.exp: Add test where T packet is
disabled.
|
|
This removes ui_file_isatty, ui_file_read, ui_file_write,
ui_file_write_async_safe, ui_file_flush, and ui_file_puts, replacing
them with calls to the appropriate method instead.
gdb/ChangeLog
2020-02-11 Tom Tromey <tromey@adacore.com>
* remote.c (remote_console_output): Update.
* printcmd.c (printf_command): Update.
* event-loop.c (gdb_wait_for_event): Update.
* linux-nat.c (sigchld_handler): Update.
* remote-sim.c (gdb_os_write_stdout): Update.
(gdb_os_flush_stdout): Update.
(gdb_os_flush_stderr): Update.
(gdb_os_write_stderr): Update.
* exceptions.c (print_exception): Update.
* remote-fileio.c (remote_fileio_func_read): Update.
(remote_fileio_func_write): Update.
* tui/tui.c (tui_enable): Update.
* tui/tui-interp.c (tui_interp::init): Update.
* utils.c (init_page_info): Update.
(putchar_unfiltered, fputc_unfiltered): Update.
(gdb_flush): Update.
(emit_style_escape): Update.
(flush_wrap_buffer, fputs_maybe_filtered): Update.
* ui-file.c (ui_file_isatty, ui_file_read, ui_file_write)
(ui_file_write_async_safe, ui_file_flush, ui_file_puts): Remove.
(stderr_file::write): Update.
(stderr_file::puts): Update.
* ui-file.h (ui_file_isatty, ui_file_write)
(ui_file_write_async_safe, ui_file_read, ui_file_flush)
(ui_file_puts): Don't declare.
Change-Id: I3ca9b36e9107f6adbc41e014f5078b41d6bcec4d
|
|
This patch redefines fputs_unfiltered in utils.c, with new behavior to
forward parameters to fputs_maybe_filtered. This makes
fputs_unfiltered identical to fputs_filtered, except filtering is
disabled.
Some callers of fputs_unfiltered have been updated to use ui_file_puts
where they were using other ui_file_* functions anyway for IO.
This fixes the problem I saw with \032\032post-prompt annotation being
flushed to stdout in the wrong order.
2020-02-05 Iain Buclaw <ibuclaw@gdcproject.org>
PR gdb/25190:
* gdb/remote-sim.c (gdb_os_write_stderr): Update.
* gdb/remote.c (remote_console_output): Update.
* gdb/ui-file.c (fputs_unfiltered): Rename to...
(ui_file_puts): ...this.
* gdb/ui-file.h (ui_file_puts): Add declaration.
* gdb/utils.c (emit_style_escape): Update.
(flush_wrap_buffer): Update.
(fputs_maybe_filtered): Update.
(fputs_unfiltered): Add function.
Change-Id: I17ed5078f71208344f2f8ab634a6518b1af6e213
|
|
This changes gdb_flush to also flush the internal wrap buffer. A few
places needed to continue using the previous approach, so this also
introduces ui_file_flush for those.
2020-02-05 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb/event-loop.c (gdb_wait_for_event): Update.
* gdb/printcmd.c (printf_command): Update.
* gdb/remote-fileio.c (remote_fileio_func_write): Update.
* gdb/remote-sim.c (gdb_os_flush_stdout): Update.
(gdb_os_flush_stderr): Update.
* gdb/remote.c (remote_console_output): Update.
* gdb/ui-file.c (gdb_flush): Rename to...
(ui_file_flush): ...this.
(stderr_file::write): Update.
(stderr_file::puts): Update.
* gdb/ui-file.h (gdb_flush): Rename to...
(ui_file_flush): ...this.
* gdb/utils.c (gdb_flush): Add function.
* gdb/utils.h (gdb_flush): Add declaration.
Change-Id: I7ca143d30f03dc39f218f6e880eb9bca9e15af39
|
|
Switch thread_info::resumed to bool (thread_info::executing already is a bool),
and try to change everything more or less related to that to consistently use
true/false instead of 1/0.
gdb/ChangeLog:
* fork-child.c (gdb_startup_inferior): Use bool instead of int.
* gdbthread.h (class thread_info) <resumed>: Likewise.
* infrun.c (resume_1): Likewise.
(proceed): Likewise.
(infrun_thread_stop_requested): Likewise.
(stop_all_threads): Likewise.
(handle_inferior_event): Likewise.
(restart_threads): Likewise.
(finish_step_over): Likewise.
(keep_going_stepped_thread): Likewise.
* linux-nat.c (attach_proc_task_lwp_callback): Likewise.
(linux_handle_extended_wait): Likewise.
* record-btrace.c (get_thread_current_frame_id): Likewise.
* record-full.c (record_full_wait_1): Likewise.
* remote.c (remote_target::process_initial_stop_replies): Likewise.
* target.c (target_resume): Likewise.
* thread.c (set_running_thread): Likewise.
|
|
This option allows to tell GDB to detect and possibly handle mismatched exec-files.
A recurrent problem with GDB is that GDB uses the wrong exec-file
when using the attach/detach commands successively.
Also, in case the user specifies a file on the command line but attaches
to the wrong PID, this error is not made visible and gives a not user
understandable behaviour.
For example:
$ gdb
...
(gdb) atta 2682 ############################################ PID running 'sleepers' executable
Attaching to process 2682
[New LWP 2683]
[New LWP 2684]
[New LWP 2685]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) det
Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682
[Inferior 1 (process 2682) detached]
(gdb) atta 31069 ############################################ PID running 'gdb' executable
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
Reading symbols from /lib64/ld-linux-x86-64.so.2...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in ?? ()
(gdb) bt
#0 0x00007f43c23478a0 in ?? ()
#1 0x0000558909e3ad91 in ?? ()
#2 0x0000202962646700 in ?? ()
#3 0x00007ffc69c74e70 in ?? ()
#4 0x000055890c1d2350 in ?? ()
#5 0x0000000000000000 in ?? ()
(gdb)
The second attach has kept the executable of the first attach.
(in this case, 31069 is the PID of a GDB, that has nothing to do
with the first determined 'sleepers' executable).
Similarly, if specifying an executable, but attaching to a wrong pid,
we get:
gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
...
Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers...
(gdb) atta 31069 ############################################ PID running 'gdb' executable
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
Reading symbols from /lib64/ld-linux-x86-64.so.2...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in ?? ()
(gdb) bt
#0 0x00007f43c23478a0 in ?? ()
#1 0x0000558909e3ad91 in ?? ()
#2 0x0000202962646700 in ?? ()
#3 0x00007ffc69c74e70 in ?? ()
#4 0x000055890c1d2350 in ?? ()
#5 0x0000000000000000 in ?? ()
(gdb)
And it is unclear to the user what has happened/what is going wrong.
This patch series implements a new option:
(gdb) apropos exec-file-mismatch
set exec-file-mismatch -- Set exec-file-mismatch handling (ask|warn|off).
show exec-file-mismatch -- Show exec-file-mismatch handling (ask|warn|off).
(gdb) help set exec-file-mismatch
Set exec-file-mismatch handling (ask|warn|off).
Specifies how to handle a mismatch between the current exec-file name
loaded by GDB and the exec-file name automatically determined when attaching
to a process:
ask - warn the user and ask whether to load the determined exec-file.
warn - warn the user, but do not change the exec-file.
off - do not check for mismatch.
"ask" means: in case of mismatch between the current exec-file name
and the automatically determined exec-file name of the PID we are attaching to,
give a warning to the user and ask whether to load the automatically determined
exec-file.
"warn" means: in case of mismatch, just give a warning to the user.
"off" means: do not check for mismatch.
This fixes PR gdb/17626.
There was a previous trial to fix this PR.
See https://sourceware.org/ml/gdb-patches/2015-07/msg00118.html
This trial was however only fixing the problem for the automatically
determined executable files when doing attach.
It was differentiating the 'user specified executable files' ("sticky")
from the executable files automatically found by GDB.
But such user specified sticky executables are in most cases due
to a wrong manipulation by the user, giving unexpected results
such as backtrace showing no function like in the above example.
This patch ensures that whenever a process executable can be
determined, that the user is warned if there is a mismatch.
The same tests as above then give:
(gdb) atta 2682
Attaching to process 2682
[New LWP 2683]
[New LWP 2684]
[New LWP 2685]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) det
Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682
[Inferior 1 (process 2682) detached]
(gdb) atta 31069
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y
Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb...
Setting up the environment for debugging gdb.
...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(top-gdb) bt
During symbol reading: incomplete CFI data; unspecified registers (e.g., rax) at 0x7f43c23478ad
During symbol reading: unsupported tag: 'DW_TAG_unspecified_type'
During symbol reading: cannot get low and high bounds for subprogram DIE at 0x12282a7
During symbol reading: Child DIE 0x12288ba and its abstract origin 0x1228b26 have different parents
During symbol reading: DW_AT_call_target target DIE has invalid low pc, for referencing DIE 0x1229540 [in module /bd/home/philippe/gdb/git/build_fixes/gdb/gdb]
#0 0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84
#1 0x0000558909e3ad91 in poll (__timeout=-1, __nfds=<optimized out>, __fds=<optimized out>) at /usr/include/x86_64-linux-gnu/bits/poll2.h:46
#2 gdb_wait_for_event (block=block@entry=1) at ../../fixes/gdb/event-loop.c:772
#3 0x0000558909e3aef4 in gdb_do_one_event () at ../../fixes/gdb/event-loop.c:347
#4 0x0000558909e3b085 in gdb_do_one_event () at ../../fixes/gdb/common/common-exceptions.h:219
#5 start_event_loop () at ../../fixes/gdb/event-loop.c:371
During symbol reading: Member function "~_Sp_counted_base" (offset 0x1c69bf7) is virtual but the vtable offset is not specified
During symbol reading: Multiple children of DIE 0x1c8f5a0 refer to DIE 0x1c8f0ee as their abstract origin
#6 0x0000558909ed3b78 in captured_command_loop () at ../../fixes/gdb/main.c:331
#7 0x0000558909ed4b6d in captured_main (data=<optimized out>) at ../../fixes/gdb/main.c:1174
#8 gdb_main (args=<optimized out>) at ../../fixes/gdb/main.c:1190
#9 0x0000558909c1e9a8 in main (argc=<optimized out>, argv=<optimized out>) at ../../fixes/gdb/gdb.c:32
(top-gdb)
gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
...
Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers...
(gdb) atta 31069
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y
Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb...
Setting up the environment for debugging gdb.
....
In other words, it now works as intuitively expected by the user.
If ever the user gave the correct executable on the command line,
then attached to the wrong pid, then confirmed loading the wrong executable,
the user can simply fix this by detaching, and attaching to the correct pid,
GDB will then tell again to the user that the exec-file might better
be loaded.
The default value of "ask" is chosen instead of e.g. "warn" as in most
cases, switching of executable will be the correct action,
and in any case, the user can decide to not load the executable,
as GDB asks a confirmation to the user to load the new executable.
For settings "ask" and "warn", the new function validate_exec_file ()
tries to get the inferior pid exec file and compares it with the current
exec file. In case of mismatch, it warns the user and optionally load
the executable.
This function is called in the attach_command implementation to cover
most cases of attaching to a running process.
It must also be called in remote.c, as the attach command is not supported
for all types of remote gdbserver.
gdb/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* exec.c (exec_file_mismatch_names, exec_file_mismatch_mode)
(show_exec_file_mismatch_command, set_exec_file_mismatch_command)
(validate_exec_file): New variables, enums, functions.
(exec_file_locate_attach, print_section_info): Style the filenames.
(_initialize_exec): Install show_exec_file_mismatch_command and
set_exec_file_mismatch_command.
* gdbcore.h (validate_exec_file): Declare.
* infcmd.c (attach_command): Call validate_exec_file.
* remote.c ( remote_target::remote_add_inferior): Likewise.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
This commit extends the CLI a bit for multi-target, in three ways.
#1 - New "info connections" command.
This is a new command that lists the open connections (process_stratum
targets). For example, if you're debugging two remote connections, a
couple local/native processes, and a core dump, all at the same time,
you might see something like this:
(gdb) info connections
Num What Description
1 remote 192.168.0.1:9999 Remote serial target in gdb-specific protocol
2 remote 192.168.0.2:9998 Remote serial target in gdb-specific protocol
* 3 native Native process
4 core Local core dump file
#2 - New "info inferiors" "Connection" column
You'll also see a new matching "Connection" column in "info
inferiors", showing you which connection an inferior is bound to:
(gdb) info inferiors
Num Description Connection Executable
1 process 18526 1 (remote 192.168.0.1:9999) target:/tmp/a.out
2 process 18531 2 (remote 192.168.0.2:9998) target:/tmp/a.out
3 process 19115 3 (native) /tmp/prog1
4 process 6286 4 (core) myprogram
* 5 process 19122 3 (native) /bin/hello
#3 - Makes "add-inferior" show the inferior's target connection
"add-inferior" now shows you the connection you've just bound the
inferior to, which is the current process_stratum target:
(gdb) add-inferior
[New inferior 2]
Added inferior 2 on connection 1 (extended-remote localhost:2346)
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add target-connection.c.
* inferior.c (uiout_field_connection): New function.
(print_inferior): Add new "connection-id" column.
(add_inferior_command): Show connection number/string of added
inferior.
* process-stratum-target.h
(process_stratum_target::connection_string): New virtual method.
(process_stratum_target::connection_number): New field.
* remote.c (remote_target::connection_string): New override.
* target-connection.c: New file.
* target-connection.h: New file.
* target.c (decref_target): Remove process_stratum targets from
the connection list.
(target_stack::push): Add process_stratum targets to the
connection list.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/kill-detach-inferiors-cmd.exp: Adjust expected output
of "add-inferior".
* gdb.base/quit-live.exp: Likewise.
* gdb.base/remote-exec-file.exp: Likewise.
* gdb.guile/scm-progspace.exp: Likewise.
* gdb.linespec/linespec.exp: Likewise.
* gdb.mi/new-ui-mi-sync.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
* gdb.multi/multi-target.exp (setup): Add "info connection" and
"info inferiors" tests.
* gdb.multi/remove-inferiors.exp: Adjust expected output of
"add-inferior".
* gdb.multi/watchpoint-multi.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.server/extended-remote-restart.exp: Likewise.
* gdb.threads/fork-plus-threads.exp: Adjust expected output of
"info inferiors".
* gdb.threads/forking-threads-plus-breakpoint.exp: Likewise.
* gdb.trace/report.exp: Likewise.
|
|
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
|
|
Another bug exposed by gdb.server/extended-remote-restart.exp in the
multi-target work is that remote_target::start_remote can leave
inferior_ptid and current_inferior() out of sync:
(top-gdb) p current_inferior_->pid
$1 = 29541
(top-gdb) p inferior_ptid
$2 = {m_pid = 29540, m_lwp = 29540, m_tid = 0}
This is caused by writing to inferior_ptid directly instead of using
switch_to_thread. Also, "inferior_list->thread_list->ptid" assumes
that we want the first thread of the first inferior, but that inferior
may not have threads, or with multi-target, that target may be
connected to some other target.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::start_remote): Don't set inferior_ptid
directly. Instead find the first thread in the thread list and
use switch_to_thread.
|
|
The multi-target patch will change the remote target's behavior when:
- the current inferior is connected to an extended-remote target.
- the current inferior is attached to any process.
- some other inferior than than the current one is live.
In current master, we get:
(gdb) tar extended-remote :9999
A program is being debugged already. Kill it? (y or n)
While after multi-target, since each inferior may have its own target
connection, we'll get:
(gdb) tar extended-remote :9999
Already connected to a remote target. Disconnect? (y or n)
That change made gdb.server/extended-remote-restart.exp expose a gdb
bug, because it made "target remote", via gdb_reconnect, just
disconnect from the previous connection, while in current master that
command would kill the inferior before disconnecting. In turn, that
would make a multi-target gdb find processes already running under
control of gdbserver as soon as it reconnects, while in current master
there is never any process around when gdb reconnects, since they'd
all been killed prior to disconnection.
The bug this exposed is that remote_target::remote_add_inferior was
always reusing current_inferior() for the new process, even if the
current inferior was already bound to a process. In the testcase's
case, when we reconnect, the remote is debugging two processes. So
we'd bind the first remote process to the empty current inferior the
first time, and then bind the second remote process to the same
inferior again, essencially losing track of the first process. That
resulted in failed assertions when we look up the inferior for the
first process by PID. The fix is to still prefer binding to the
current inferior (so that plain "target remote" keeps doing what you'd
expect), but not reuse the current inferior if it is already bound to
a process.
This patch tweaks the test to explicitly disconnect before
reconnecting, to avoid GDB killing processes, thus making current GDB
behave the same as it will behave when the multi-target work lands.
That change alone without the GDB fix exposes the bug like so:
(gdb) PASS: gdb.server/extended-remote-restart.exp: kill: 0, follow-child 0: disconnect
target extended-remote localhost:2350
Remote debugging using localhost:2350
src/gdb/thread.c:93: internal-error: thread_info* inferior_thread(): Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The original bug that the testcase was written for was related to
killing, (git 9d4a934ce604 ("gdb: Fix assert for extended-remote
target (PR gdb/18050)")), but since the testcase tries reconnecting
with both explicitly killing and not explicitly killing, I think we're
covering the original bug with this testcase change.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::remote_add_inferior): Don't bind a
process to the current inferior if the current inferior is already
bound to a process.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.server/extended-remote-restart.exp (test_reload): Explicitly
disconnect before reconnecting.
|
|
The multi-target patch makes inferior_ptid point to null_ptid before
calling into target_wait, which catches bad uses of inferior_ptid,
since the current selected thread in gdb shouldn't have much relation
to the thread that reports an event.
One such bad use is found in remote_target::remote_parse_stop_reply,
where we handle the 'W' or 'X' packets (process exit), and the remote
target does not support the multi-process extensions, i.e., it does
not report the PID of the process that exited.
With the multi-target patch, that would result in a failed assertion,
trying to find the inferior for process pid 0.
gdb/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* remote.c (remote_target::remote_parse_stop_reply) <W/X packets>:
If no process is specified, return null_ptid instead of
inferior_ptid.
(remote_target::wait_as): Handle TARGET_WAITKIND_EXITED /
TARGET_WAITKIND_SIGNALLED with no pid.
gdb/testsuite/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* gdb.server/connect-without-multi-process.exp: Also test
continuing to end.
|
|
With current master, on a Fedora 27 machine with a kernel with buggy
watchpoint support, I see:
(gdb) PASS: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
continue
Continuing.
warning: Remote failure reply: E01
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
continue
The program is not being run.
(gdb) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork (the program is no longer running)
The FAILs themselves aren't what's interesting here. What is
interesting is that with the main multi-target patch applied, I was getting this:
(gdb) PASS: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
continue
Continuing.
warning: Remote failure reply: E01
/home/pedro/brno/pedro/gdb/binutils-gdb-2/build/../src/gdb/inferior.c:285: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
The problem is that in remote_target::wait_as, we're hitting this:
switch (buf[0])
{
case 'E': /* Error of some sort. */
/* We're out of sync with the target now. Did it continue or
not? Not is more likely, so report a stop. */
rs->waiting_for_stop_reply = 0;
warning (_("Remote failure reply: %s"), buf);
status->kind = TARGET_WAITKIND_STOPPED;
status->value.sig = GDB_SIGNAL_0;
break;
which leaves event_ptid as null_ptid. At the end of the function, we then reach:
else if (status->kind != TARGET_WAITKIND_EXITED
&& status->kind != TARGET_WAITKIND_SIGNALLED)
{
if (event_ptid != null_ptid)
record_currthread (rs, event_ptid);
else
event_ptid = inferior_ptid; <<<<< here
}
and the trouble is that with the multi-target patch, we'll get here
with inferior_ptid as null_ptid too. That is done exactly to find
these implicit assumptions that inferior_ptid is a good choice for
default thread, which isn't generaly true.
I first thought of fixing this in the "case 'E'" path, but, given that
this "event_ptid = inferior_ptid" path is also taken when the remote
target does not support threads at all, no thread-related packets or
extensions, it's better to fix it in latter path, to handle all
scenarios that miss reporting a thread.
That's what this patch does.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (first_remote_resumed_thread): New.
(remote_target::wait_as): Use it as default event_ptid instead of
inferior_ptid.
|
|
I believe the tail end of remote_target::mourn_inferior is broken, and
it's been broken for too long to even bother trying to fix. Most
probably nobody needs it. If the code is reached and we find the
target is running, we'd need to resync the thread list, at least,
since generic_mourn_inferior got rid of all the threads in the
inferior, otherwise, we'd hit an assertion on the next call to
inferior_thread(), for example. A "correct" fix would probably
involve restarting the whole remote_target::start_remote requence,
exactly as if we had completely disconnected and reconnected from
scratch.
Note that regular stub debugging usually uses plain target remote, but
this code is only reachable in target extended-mode:
- The !remote_multi_process_p check means that it's only reacheable if
the stub does not support multi-process. I.e., there can only ever
be one live process.
- remote_target::mourn_inferior has this at the top:
/* In 'target remote' mode with one inferior, we close the connection. */
if (!rs->extended && number_of_live_inferiors () <= 1)
{
unpush_target (this);
/* remote_close takes care of doing most of the clean up. */
generic_mourn_inferior ();
return;
}
Which means that if we only had one live inferior (which for our
case, must be true), we'll have closed the connection already,
unless we're in extended-remote mode.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::mourn_inferior): No longer check
whether the target is running.
|
|
The "set remote exec-file" setting is per-inferior, but the "show
remote exec-file" command always shows the last set exec-file,
irrespective of the current inferior. E.g.:
# Set inferior 1's exec-file:
(gdb) set remote exec-file prog1
# Add inferior 2, switch to it, and set its exec-file:
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
(gdb) set remote exec-file prog2
# Switch back to inferior 1, and show its exec-file:
(gdb) inferior 1
(gdb) show remote exec-file
prog2
^^^^^ should show "prog1" instead here.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (show_remote_exec_file): Show the current inferior's
exec-file instead of the command variable's value.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/remote-exec-file.exp: New file.
|
|
This changes section_offsets to be specialization of a std::vector and
updates all the users. It also removes the ANOFFSET and
SIZEOF_N_SECTION_OFFSETS macros.
Most of this is just a generic sort of cleanup, that reduces the
number of lines of code. However, a couple spots were doing weird
things.
objfile_relocate did:
- std::vector<struct section_offsets>
- new_debug_offsets (SIZEOF_N_SECTION_OFFSETS (debug_objfile->num_sections));
... which seems to greatly over-estimate the number of elements
needed.
This appeared in set_objfile_default_section_offset:
- std::vector<struct section_offsets> offsets (objf->num_sections,
- { { offset } });
... which makes sense due to type safety, but is also actively
confusing given that section_offsets was previously also a kind of
vector type.
Tested on x86-64 Fedora 30.
gdb/ChangeLog
2020-01-08 Tom Tromey <tromey@adacore.com>
* xcoffread.c (enter_line_range, read_xcoff_symtab)
(process_xcoff_symbol, xcoff_symfile_offsets): Update.
* symtab.h (MSYMBOL_VALUE_ADDRESS): Update.
(struct section_offsets, ANOFFSET, SIZEOF_N_SECTION_OFFSETS):
Remove.
(section_offsets): New typedef.
* symtab.c (fixup_section, get_msymbol_address): Update.
* symmisc.c (dump_msymbols): Update.
* symfile.h (relative_addr_info_to_section_offsets)
(symfile_map_offsets_to_segments): Update.
* symfile.c (build_section_addr_info_from_objfile)
(init_objfile_sect_indices): Update.
(struct place_section_arg): Change type of "offsets".
(place_section): Update.
(relative_addr_info_to_section_offsets): Change type of
"section_offsets". Remove "num_sections" parameter.
(default_symfile_offsets, syms_from_objfile_1)
(set_objfile_default_section_offset): Update.
(reread_symbols): No need to preserve section offsets by hand.
(symfile_map_offsets_to_segments): Change type of "offsets".
* stap-probe.c (relocate_address): Update.
* stabsread.h (process_one_symbol): Update.
* solib-target.c (struct lm_info_target) <offsets>: Change type.
(solib_target_relocate_section_addresses): Update.
* solib-svr4.c (enable_break, svr4_relocate_main_executable):
Update.
* solib-frv.c (frv_relocate_main_executable): Update.
* solib-dsbt.c (dsbt_relocate_main_executable): Update.
* solib-aix.c (solib_aix_get_section_offsets): Change return
type.
(solib_aix_solib_create_inferior_hook): Update.
* remote.c (remote_target::get_offsets): Update.
* psymtab.c (find_pc_sect_psymtab): Update.
* psympriv.h (struct partial_symbol) <address, text_low,
text_high>: Update.
* objfiles.h (obj_section_offset): Update.
(struct objfile) <section_offsets>: Change type.
<num_sections>: Remove.
(objfile_relocate): Update.
* objfiles.c (entry_point_address_query): Update
(relocate_one_symbol): Change type of "section_offsets".
(objfile_relocate1, objfile_relocate1): Change type of
"new_offsets".
(objfile_rebase1): Update.
* mipsread.c (mipscoff_symfile_read): Update.
(read_alphacoff_dynamic_symtab): Remove "section_offsets"
parameter.
* mdebugread.c (parse_symbol): Change type of "section_offsets".
(parse_external, psymtab_to_symtab_1): Update.
* machoread.c (macho_symfile_offsets): Update.
* ia64-tdep.c (ia64_find_unwind_table): Update.
* hppa-tdep.c (read_unwind_info): Update.
* hppa-bsd-tdep.c (hppabsd_find_global_pointer): Update.
* dwarf2read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(process_psymtab_comp_unit_reader, add_partial_symbol)
(add_partial_subprogram, process_full_comp_unit)
(read_file_scope, read_func_scope, read_lexical_block_scope)
(read_call_site_scope, dwarf2_rnglists_process)
(dwarf2_ranges_process, dwarf2_ranges_read)
(dwarf_decode_lines_1, var_decode_location, new_symbol)
(dwarf2_fetch_die_loc_sect_off, dwarf2_per_cu_text_offset):
Update.
* dwarf2-frame.c (execute_cfa_program, dwarf2_frame_find_fde):
Update.
* dtrace-probe.c (dtrace_probe::get_relocated_address): Update.
* dbxread.c (read_dbx_symtab, read_ofile_symtab): Update.
(process_one_symbol): Change type of "section_offsets".
* ctfread.c (get_objfile_text_range): Update.
* coffread.c (coff_symtab_read, enter_linenos)
(process_coff_symbol): Update.
* coff-pe-read.c (add_pe_forwarded_sym): Update.
* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Update.
Change-Id: I147eb967e9b44d82f4048039de7bb44b80cd72fb
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
I noticed that get_exec_file could return a "const char *". This
patch implements this change.
I couldn't build all the code -- but I did build Linux native and a
mingw cross.
Consequently, the NTO code has a hack, where it casts away const. I
think this can be removed, but that required more work there, and
since I couldn't compile it, I felt it best not to try.
Let me know what you think.
gdb/ChangeLog
2019-12-16 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach): Update.
* remote.c (extended_remote_target::attach): Update.
* procfs.c (procfs_target::attach): Update.
* nto-procfs.c (nto_procfs_target::attach): Update.
(nto_procfs_target::create_inferior): Update.
* inf-ptrace.c (inf_ptrace_target::attach): Update.
* gnu-nat.c (gnu_nat_target::attach): Update.
(gnu_nat_target::detach): Update.
* darwin-nat.c (darwin_nat_target::attach): Update.
* corefile.c (get_exec_file): Constify result. Remove extraneous
return.
* bsd-kvm.c (bsd_kvm_target_open): Update.
* gdbsupport/common-inferior.h (get_exec_file): Constify result.
gdb/gdbserver/ChangeLog
2019-12-16 Tom Tromey <tromey@adacore.com>
* server.c (get_exec_file): Constify result.
Change-Id: I29c60f7313a7def0dcb290ff0c2a4c1dea4f981f
|
|
All these functions are only used in their respective files, they are
missing the static keyword, add them.
gdb/ChangeLog:
* arc-tdep.c (arc_insn_get_memory_base_reg): Make static.
(arc_insn_get_memory_offset): Likewise.
(arc_insn_dump): Likewise.
* cp-support.c (test_cp_symbol_name_matches): Likewise.
* csky-linux-tdep.c (csky_supply_fregset): Likewise.
* dictionary.c (dict_iterator_next): Likewise.
(dict_iter_match_first): Likewise.
(dict_iter_match_next): Likewise.
* f-lang.c (evaluate_subexp_f): Likewise.
* hppa-tdep.c (hppa_read_pc): Likewise.
* i386-tdep.c (i386_floatformat_for_type): Likewise.
* parse.c (write_exp_elt_msym): Likewise.
* ppc-linux-tdep.c (ppc_floatformat_for_type): Likewise.
* remote.c (remote_packet_size): Likewise.
(remote_notif_stop_parse): Likewise.
* rs6000-aix-tdep.c (aix_sighandle_frame_sniffer): Likewise.
* s12z-tdep.c (s12z_disassemble_info): Likewise.
* source.c (prepare_path_for_appending): Likewise.
* sparc64-linux-tdep.c
(sparc64_linux_handle_segmentation_fault); Likewise.
* stack.c (frame_selection_by_function_completer): Likewise.
Change-Id: I18e187ad279075b961e3e22e5b034f5c0f6188f0
|
|
While debugging, i felt the need to adjust the truncation length of remote
packets so i could see more or less data as needed. The default is currently
set to 512 bytes.
This patch makes this option adjustable through the new "set debug
remote-packet-max-chars" command. It can be set to unlimited if we want to
completely disable truncation.
Update on v5:
- Adjusted function and variable documentation, NEWS entry and GDB manual.
gdb/ChangeLog:
2019-11-25 Luis Machado <luis.machado@linaro.org>
* NEWS (New Commands): Mention "set debug remote-packet-max-chars".
* remote.c (REMOTE_DEBUG_MAX_CHAR): Remove.
(remote_packet_max_chars): New static global.
(show_remote_packet_max_chars): New function.
(remote_target::putpkt_binary): Adjust to use new
remote_packet_max_chars option.
(remote_target::getpkt_or_notif_sane_1): Likewise.
(_initialize_remote): Register new remote-packet-max-chars option.
gdb/doc/ChangeLog:
2019-11-25 Luis Machado <luis.machado@linaro.org>
* gdb.texinfo (Debugging Output): Document set debug
remote-packet-max-chars.
Change-Id: I2e871b37bfcaa6376537c3fe3db8f016dd806a7c
|
|
Improves threadsafety. This will be important when the patch series at
https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/176
lands.
gdb/ChangeLog:
2019-11-06 Christian Biesinger <cbiesinger@google.com>
* linux-tdep.c (linux_info_proc): Use strtok_r instead of strtok.
* mi/mi-main.c (output_cores): Likewise.
* nat/linux-osdata.c (linux_xfer_osdata_cpus): Likewise.
(linux_xfer_osdata_modules): Likewise.
* remote.c (register_remote_support_xml): Likewise.
* sparc64-tdep.c (adi_is_addr_mapped): Likewise.
* xml-syscall.c (syscall_create_syscall_desc): Likewise.
gdb/gdbserver/ChangeLog:
2019-11-06 Christian Biesinger <cbiesinger@google.com>
* linux-x86-low.c (x86_linux_process_qsupported): Use strtok_r
instead of strtok.
* server.c (handle_query): Likewise.
(captured_main): Likewise.
Change-Id: Ief6138965a24398e5fc064598cd8f2abd3b5047c
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* aarch64-linux-tdep.c: Fix typos in comments.
* aarch64-tdep.c: Same.
* ada-lang.c: Same.
* amd64-nat.c: Same.
* arc-tdep.c: Same.
* arch/aarch64-insn.c: Same.
* block.c: Same.
* breakpoint.h: Same.
* btrace.h: Same.
* c-varobj.c: Same.
* cli/cli-decode.c: Same.
* cli/cli-script.c: Same.
* cli/cli-utils.h: Same.
* coff-pe-read.c: Same.
* coffread.c: Same.
* compile/compile-cplus-symbols.c: Same.
* compile/compile-object-run.c: Same.
* completer.c: Same.
* corelow.c: Same.
* cp-support.c: Same.
* demangle.c: Same.
* dwarf-index-write.c: Same.
* dwarf2-frame.c: Same.
* dwarf2-frame.h: Same.
* eval.c: Same.
* frame-base.h: Same.
* frame.h: Same.
* gdbcmd.h: Same.
* gdbtypes.h: Same.
* gnu-nat.c: Same.
* guile/scm-objfile.c: Same.
* i386-tdep.c: Same.
* i386-tdep.h: Same.
* infcall.c: Same.
* infcall.h: Same.
* linux-nat.c: Same.
* m68k-tdep.c: Same.
* macroexp.c: Same.
* memattr.c: Same.
* mi/mi-cmd-disas.c: Same.
* mi/mi-getopt.h: Same.
* mi/mi-main.c: Same.
* minsyms.c: Same.
* nat/aarch64-sve-linux-sigcontext.h: Same.
* objfiles.h: Same.
* ppc-linux-nat.c: Same.
* ppc-linux-tdep.c: Same.
* ppc-tdep.h: Same.
* progspace.h: Same.
* prologue-value.h: Same.
* python/py-evtregistry.c: Same.
* python/py-instruction.h: Same.
* record-btrace.c: Same.
* record-full.c: Same.
* remote.c: Same.
* rs6000-tdep.c: Same.
* ser-tcp.c: Same.
* sol-thread.c: Same.
* sparc-sol2-tdep.c: Same.
* sparc64-tdep.c: Same.
* stabsread.c: Same.
* symfile.c: Same.
* symtab.h: Same.
* target.c: Same.
* tracepoint.c: Same.
* tui/tui-data.h: Same.
* tui/tui-io.c: Same.
* tui/tui-win.c: Same.
* tui/tui.c: Same.
* unittests/rsp-low-selftests.c: Same.
* user-regs.h: Same.
* utils.c: Same.
* utils.h: Same.
* valarith.c: Same.
* valops.c: Same.
* valprint.c: Same.
* valprint.h: Same.
* value.c: Same.
* value.h: Same.
* varobj.c: Same.
* x86-nat.h: Same.
* xtensa-tdep.c: Same.
gdb/gdbserver/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* linux-aarch64-low.c: Fix typos in comments.
* linux-arm-low.c: Same.
* linux-low.c: Same.
* linux-ppc-low.c: Same.
* proc-service.c: Same.
* regcache.h: Same.
* server.c: Same.
* tracepoint.c: Same.
* win32-low.c: Same.
gdb/stubs/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* ia64vms-stub.c: Fix typos in comments.
* m32r-stub.c: Same.
* m68k-stub.c: Same.
* sh-stub.c: Same.
gdb/testsuite/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* gdb.base/bigcore.c: Fix typos in comments.
* gdb.base/ctf-ptype.c: Same.
* gdb.base/long_long.c: Same.
* gdb.dwarf2/dw2-op-out-param.S: Same.
* gdb.python/py-evthreads.c: Same.
* gdb.reverse/i387-stack-reverse.c: Same.
* gdb.trace/tfile.c: Same.
* lib/compiler.c: Same.
* lib/compiler.cc: Same.
Change-Id: I8573d84a577894270179ae30f46c48d806fc1beb
|
|
This has better typesafety, avoids a function pointer indirection,
and can benefit from inlining.
gdb/ChangeLog:
2019-10-19 Christian Biesinger <cbiesinger@google.com>
* bcache.c (bcache::print_statistics): Use std::sort instead of qsort.
* breakpoint.c (bp_locations_compare): Rename to...
(bp_location_is_less_than): ...this, and change to std::sort semantics.
(update_global_location_list): Use std::sort instead of qsort.
* buildsym.c (compare_line_numbers): Rename to...
(lte_is_less_than): ...this, and change to std::sort semantics.
(buildsym_compunit::end_symtab_with_blockvector): Use std::sort
instead of qsort.
* disasm.c (compare_lines): Rename to...
(line_is_less_than): ...this, and change to std::sort semantics.
(do_mixed_source_and_assembly_deprecated): Call std::sort instead
of qsort.
* dwarf2-frame.c (qsort_fde_cmp): Rename to...
(fde_is_less_than): ...this, and change to std::sort semantics.
(dwarf2_build_frame_info): Call std::sort instead of qsort.
* mdebugread.c (compare_blocks):
(block_is_less_than): ...this, and change to std::sort semantics.
(sort_blocks): Call std::sort instead of qsort.
* objfiles.c (qsort_cmp): Rename to...
(sort_cmp): ...this, and change to std::sort semantics.
(update_section_map): Call std::sort instead of qsort.
* remote.c (compare_pnums): Remove.
(map_regcache_remote_table): Call std::sort instead of qsort.
* utils.c (compare_positive_ints): Remove.
* utils.h (compare_positive_ints): Remove.
* xcoffread.c (compare_lte): Remove.
(arrange_linetable): Call std::sort instead of qsort.
Change-Id: Ibcddce12a3d07448701e731b7150fa23611d86de
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-18 Tom de Vries <tdevries@suse.de>
* aarch64-tdep.c: Fix typos in comments.
* ada-lang.c: Same.
* ada-tasks.c: Same.
* alpha-tdep.c: Same.
* alpha-tdep.h: Same.
* amd64-nat.c: Same.
* amd64-windows-tdep.c: Same.
* arc-tdep.c: Same.
* arc-tdep.h: Same.
* arch-utils.c: Same.
* arm-nbsd-tdep.c: Same.
* arm-tdep.c: Same.
* ax-gdb.c: Same.
* blockframe.c: Same.
* btrace.c: Same.
* c-varobj.c: Same.
* coff-pe-read.c: Same.
* coffread.c: Same.
* cris-tdep.c: Same.
* darwin-nat.c: Same.
* dbxread.c: Same.
* dcache.c: Same.
* disasm.c: Same.
* dtrace-probe.c: Same.
* dwarf-index-write.c: Same.
* dwarf2-frame-tailcall.c: Same.
* dwarf2-frame.c: Same.
* dwarf2read.c: Same.
* eval.c: Same.
* exceptions.c: Same.
* fbsd-tdep.c: Same.
* findvar.c: Same.
* frame.c: Same.
* frv-tdep.c: Same.
* gnu-v3-abi.c: Same.
* go32-nat.c: Same.
* h8300-tdep.c: Same.
* hppa-tdep.c: Same.
* i386-linux-tdep.c: Same.
* i386-tdep.c: Same.
* ia64-libunwind-tdep.c: Same.
* ia64-tdep.c: Same.
* infcmd.c: Same.
* infrun.c: Same.
* linespec.c: Same.
* linux-nat.c: Same.
* linux-thread-db.c: Same.
* machoread.c: Same.
* mdebugread.c: Same.
* mep-tdep.c: Same.
* mn10300-tdep.c: Same.
* namespace.c: Same.
* objfiles.c: Same.
* opencl-lang.c: Same.
* or1k-tdep.c: Same.
* osabi.c: Same.
* ppc-linux-nat.c: Same.
* ppc-linux-tdep.c: Same.
* ppc-sysv-tdep.c: Same.
* printcmd.c: Same.
* procfs.c: Same.
* record-btrace.c: Same.
* record-full.c: Same.
* remote-fileio.c: Same.
* remote.c: Same.
* rs6000-tdep.c: Same.
* s12z-tdep.c: Same.
* score-tdep.c: Same.
* ser-base.c: Same.
* ser-go32.c: Same.
* skip.c: Same.
* sol-thread.c: Same.
* solib-svr4.c: Same.
* solib.c: Same.
* source.c: Same.
* sparc-nat.c: Same.
* sparc-sol2-tdep.c: Same.
* sparc-tdep.c: Same.
* sparc64-tdep.c: Same.
* stabsread.c: Same.
* stack.c: Same.
* symfile.c: Same.
* symtab.c: Same.
* target-descriptions.c: Same.
* target-float.c: Same.
* thread.c: Same.
* utils.c: Same.
* valops.c: Same.
* valprint.c: Same.
* value.c: Same.
* varobj.c: Same.
* windows-nat.c: Same.
* xcoffread.c: Same.
* xstormy16-tdep.c: Same.
* xtensa-tdep.c: Same.
Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-17 Tom de Vries <tdevries@suse.de>
* arm-nbsd-nat.c: Fix typos in comments.
* arm-tdep.c: Same.
* darwin-nat-info.c: Same.
* dwarf2read.c: Same.
* elfread.c: Same.
* event-top.c: Same.
* findvar.c: Same.
* gdbtypes.c: Same.
* hppa-tdep.c: Same.
* i386-tdep.c: Same.
* jit.c: Same.
* main.c: Same.
* mdebugread.c: Same.
* moxie-tdep.c: Same.
* nto-procfs.c: Same.
* osabi.c: Same.
* ppc-linux-tdep.c: Same.
* remote.c: Same.
* riscv-tdep.c: Same.
* s390-tdep.c: Same.
* sh-tdep.c: Same.
* sparc-linux-tdep.c: Same.
* sparc-nat.c: Same.
* stack.c: Same.
* target-descriptions.c: Same.
* top.c: Same.
* varobj.c: Same.
Change-Id: I6047967abd2d51c9000dea15184d19f4e952c3ff
|
|
This variable is declared in tracepoint.h, which is already included
by remote.c.
gdb/ChangeLog:
2019-10-12 Christian Biesinger <cbiesinger@google.com>
* remote.c (remote_target::get_trace_status): Remove declaration of
trace_regblock_size.
|
|
This reverts commit 381beca6146ac68b57edf47d28cdb335fbd11635.
The patch hasn't been fully reviewed yet, and Pedro would like to see
more fixes.
|
|
In Fedora GDB, we carry the following patch:
https://src.fedoraproject.org/rpms/gdb/blob/8ac06474ff1e2aa4920d14e0666b083eeaca8952/f/gdb-attach-fail-reasons-5of5.patch
Its purpose is to try to detect a specific scenario where SELinux's
'deny_ptrace' option is enabled, which prevents GDB from ptrace'ing in
order to debug the inferior (PTRACE_ATTACH and PTRACE_TRACEME will
fail with EACCES in this case).
I like the idea of improving error detection and providing more
information to the user (a simple "Permission denied" can be really
frustrating), but I don't fully agree with the way the patch was
implemented: it makes GDB link against libselinux only for the sake of
consulting the 'deny_ptrace' setting, and then prints a warning if
ptrace failed and this setting is on.
My first thought (and attempt) was to make GDB print a generic warning
when a ptrace error happened; this message would just point the user
to our documentation, where she could find more information about
possible causes for the error (and try to diagnose/fix the problem).
This proved to be too simple, and I was convinced that it is actually
a good idea to go the extra kilometre and try to pinpoint the specific
problem (or problems) preventing ptrace from working, as well as
provide useful suggestions on how the user can fix things.
Here is the patch I came up with. It implements a new function,
'linux_ptrace_restricted_fail_reason', which does a few things to
check what's wrong with ptrace:
- It dlopen's "libselinux.so.1" and checks if the "deny_ptrace"
option is enabled.
- It reads the contents of "/proc/sys/kernel/yama/ptrace_scope" and
checks if it's different than 0.
For each of these checks, if it succeeds, the user will see a message
informing about the restriction in place, and how it can be disabled.
For example, if "deny_ptrace" is enabled, the user will see:
# gdb /usr/bin/true
...
Starting program: /usr/bin/true
warning: Could not trace the inferior process.
warning: ptrace: Permission denied
The SELinux 'deny_ptrace' option is enabled and preventing GDB
from using 'ptrace'. You can disable it by executing (as root):
setsebool deny_ptrace off
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
During startup program exited with code 127.
(gdb)
In case "/proc/sys/kernel/yama/ptrace_scope" is > 0:
# gdb /usr/bin/true
...
Starting program: /usr/bin/true
warning: Could not trace the inferior process.
warning: ptrace: Operation not permitted
The Linux kernel's Yama ptrace scope is in effect, which can prevent
GDB from using 'ptrace'. You can disable it by executing (as root):
echo 0 > /proc/sys/kernel/yama/ptrace_scope
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
During startup program exited with code 127.
(gdb)
If both restrictions are enabled, both messages will show up.
This works for gdbserver as well, and actually fixes a latent bug I
found: when ptrace is restricted, gdbserver would hang due to an
unchecked ptrace call:
# gdbserver :9988 /usr/bin/true
gdbserver: linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: Operation not permitted
gdbserver: linux_ptrace_test_ret_to_nx: status 256 is not WIFSTOPPED!
gdbserver: linux_ptrace_test_ret_to_nx: failed to kill child pid 2668100 No such process
[ Here you would have to issue a C-c ]
Now, you will see:
# gdbserver :9988 /usr/bin/true
gdbserver: linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: Permission denied
gdbserver: linux_ptrace_test_ret_to_nx: status 256 is not WIFSTOPPED!
gdbserver: linux_ptrace_test_ret_to_nx: failed to kill child pid 2766868 No such process
gdbserver: Could not trace the inferior process.
gdbserver: ptrace: Permission denied
The SELinux 'deny_ptrace' option is enabled and preventing GDB
from using 'ptrace'. You can disable it by executing (as root):
setsebool deny_ptrace off
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
#
(I decided to keep all the other messages, even though I find them a
bit distracting).
If GDB can't determine the cause for the failure, it will still print
the generic error message which tells the user to check our
documentation:
There might be restrictions preventing ptrace from working. Please see
the appendix "Linux kernel ptrace restrictions" in the GDB documentation
for more details.
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
This means that the patch expands our documentation and creates a new
appendix section named "Linux kernel ptrace restrictions", with
sub-sections for each possible restriction that might be in place.
Notice how, on every message, we instruct the user to "do the right
thing" if gdbserver is being used. This is because if the user
started gdbserver *before* any ptrace restriction was in place, and
then, for some reason, one or more restrictions get enabled, then the
error message will be displayed both on gdbserver *and* on the
connected GDB. Since the user will be piloting GDB, it's important to
explicitly say that the ptrace restrictions are enabled in the target,
where gdbserver is running.
The current list of possible restrictions is:
- SELinux's 'deny_ptrace' option (detected).
- YAMA's /proc/sys/kernel/yama/ptrace_scope setting (detected).
- seccomp on Docker containers (I couldn't find how to detect).
It's important to mention that all of this is Linux-specific; as far
as I know, SELinux, YAMA and seccomp are Linux-only features.
I tested this patch locally, on my Fedora 30 machine (actually, a
Fedora Rawhide VM), but I'm not proposing a testcase for it because of
the difficulty of writing one.
WDYT?
gdb/doc/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Linux kernel ptrace restrictions): New appendix
section.
gdb/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbsupport/gdb-dlfcn.h (gdb_dlopen): Update comment and
mention that the function throws an error.
* inf-ptrace.c (default_inf_ptrace_me_fail_reason): New
function.
(inf_ptrace_me_fail_reason): New variable.
(inf_ptrace_me): Update call to 'trace_start_error_with_name'.
* inf-ptrace.h (inf_ptrace_me_fail_reason): New variable.
* linux-nat.c (attach_proc_task_lwp_callback): Call
'linux_ptrace_attach_fail_reason_lwp'.
(linux_nat_target::attach): Update call to
'linux_ptrace_attach_fail_reason'.
(_initialize_linux_nat): Set 'inf_ptrace_me_fail_reason'.
* nat/fork-inferior.c (trace_start_error_with_name): Add
optional 'append' argument.
* nat/fork-inferior.h (trace_start_error_with_name): Update
prototype.
* nat/linux-ptrace.c: Include "gdbsupport/gdb-dlfcn.h",
"gdbsupport/filestuff.h" and "nat/fork-inferior.h".
(selinux_ftype): New typedef.
(linux_ptrace_restricted_fail_reason): New function.
(linux_ptrace_attach_fail_reason_1): New function.
(linux_ptrace_attach_fail_reason): Change first argument type
from 'ptid_t' to 'pid_t'. Call
'linux_ptrace_attach_fail_reason_1' and
'linux_ptrace_restricted_fail_reason'.
(linux_ptrace_attach_fail_reason_lwp): New function.
(linux_ptrace_me_fail_reason): New function.
(errno_pipe): New variable.
(linux_fork_to_function): Initialize pipe before forking.
(linux_child_function): Deal with errno-passing from child.
Handle ptrace error.
(linux_check_child_ptrace_errno): New function.
(linux_check_child_ptrace_errno): Call
'linux_check_child_ptrace_errno'.
* nat/linux-ptrace.h (linux_ptrace_attach_fail_reason): Update
prototype.
(linux_ptrace_attach_fail_reason_lwp): New prototype.
(linux_ptrace_me_fail_reason): New prototype.
* remote.c (extended_remote_target::attach): Handle error
message passed by the server when attach fails.
gdb/gdbserver/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (linux_ptrace_fun): Call
'linux_ptrace_me_fail_reason'.
(attach_proc_task_lwp_callback): Call
'linux_ptrace_attach_fail_reason_lwp'.
(linux_attach): Call 'linux_ptrace_attach_fail_reason'.
* server.c (handle_v_attach): Use try..catch when calling
'attach_inferior', and send an error message to the client
when needed.
* thread-db.c (attach_thread): Call
'linux_ptrace_attach_fail_reason_lwp'.
|
|
This patch implements removal of Cell/B.E. support, including
- Support for the spu-*-* target
- Support for native stand-alone SPU debugging
- Support for integrated debugging of combined PPU/SPU applications
- Remote debugging (gdbserver) support for all the above.
The patch also removes the TARGET_OBJECT_SPU target object type,
as this is available only on Cell/B.E. targets, including
- Native Linux support
- Core file support (including core file generation)
- Remote target support, including removal of the qXfer:spu:read
and qXfer:spu:write remote protocal packets and associated
support in gdbserver.
gdb/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: Mention that Cell/B.E. debugging support was removed.
* MAINTAINERS: Remove spu target.
* config/djgpp/fnchange.lst: Remove entries for removed files.
* Makefile.in (ALL_TARGET_OBS): Remove solib-spu.o,
spu-multiarch.o, and spu-tdep.o.
(HFILES_NO_SRCDIR): Remove solib-spu.h and spu-tdep.h.
(ALLDEPFILES): Remove solib-spu.c, spu-linux-nat.c,
spu-multiarch.c, and spu-tdep.c.
* spu-linux-nat.c: Remove file.
* spu-multiarch.c: Remove file.
* spu-tdep.c: Remove file.
* spu-tdep.h: Remove file.
* solib-spu.c: Remove file.
* solib-spu.h: Remove file.
* configure.host (powerpc64*-*-linux*): Remove Cell/B.E. support.
* configure.nat (spu-linux): Remove.
* configure.tgt (powerpc*-*-linux*): Remove solib-spu.o and
solib-multiarch.o from gdb_target_obs.
(spu*-*-*): Remove.
* arch/ppc-linux-common.h (struct ppc_linux_features): Remove "cell"
feature flag.
(ppc_linux_no_features): Update.
* arch/ppc-linux-common.c (ppc_linux_match_description): Remove
Cell/B.E. support.
* arch/ppc-linux-tdesc.h (tdesc_powerpc_cell32l): Remove declaration.
(tdesc_powerpc_cell64l): Likewise.
* nat/ppc-linux.h (PPC_FEATURE_CELL): Remove.
* ppc-linux-nat.c (ppc_linux_nat_target::read_description): Remove
Cell/B.E. support.
* ppc-linux-tdep.h: Do not include "solib-spu.h" or "spu-tdep.h".
Do not include "features/rs6000/powerpc-cell32l.c" or
"features/rs6000/powerpc-cell64l.c".
(ppc_linux_spu_section): Remove.
(ppc_linux_core_read_description): Remove Cell/B.E. support.
(spe_context_objfile, spe_context_lm_addr, spe_context_offset,
spe_context_cache_ptid, spe_context_cache_ptid): Remove.
(ppc_linux_spe_context_lookup): Remove.
(ppc_linux_spe_context_inferior_created): Remove.
(ppc_linux_spe_context_solib_loaded): Remove.
(ppc_linux_spe_context_solib_unloaded): Remove.
(ppc_linux_spe_context): Remove.
(struct ppu2spu_cache): Remove.
(ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register): Remove.
(struct ppu2spu_data): Remove.
(ppu2spu_unwind_register, ppu2spu_sniffer, ppu2spu_dealloc_cache,
ppu2spu_unwind): Remove.
(ppc_linux_init_abi): Remove Cell/B.E. support.
* rs6000-tdep.h (rs6000_gdbarch_init): Remove Cell/B.E. support.
* features/Makefile (rs6000/powerpc-cell32l-expedite): Remove.
(rs6000/powerpc-cell64l-expedite): Likewise
(WHICH): Remove rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
(XMLTOC): Remove rs6000/powerpc-cell32l.xml and
rs6000/powerpc-cell64l.xml.
* features/rs6000/powerpc-cell32l.xml: Remove.
* features/rs6000/powerpc-cell64l.xml: Likewise.
* features/rs6000/powerpc-cell32l.c: Remove generated file.
* features/rs6000/powerpc-cell64l.c: Likewise.
* regformats/rs6000/powerpc-cell32l.dat: Remove generated file.
* regformats/rs6000/powerpc-cell64l.dat: Likewise.
* regformats/reg-spu.dat: Remove.
* target.h (enum target_object): Remove TARGET_OBJECT_SPU.
* corelow.c (struct spuid_list): Remove.
(add_to_spuid_list): Remove.
(core_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* remote.c (PACKET_qXfer_spu_read, PACKET_qXfer_spu_write): Remove.
(remote_protocol_features): Remove associated entries.
(_initialize_remote): No longer initialize them.
(remote_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* linux-nat.c (SPUFS_MAGIC): Remove.
(linux_proc_xfer_spu): Remove.
(spu_enumerate_spu_ids): Remove.
(linux_nat_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* linux-tdep.c (-linux_spu_make_corefile_notes): Remove.
(linux_make_corefile_notes): No longer call it.
* regcache.c (cooked_read_test): Remove bfd_arch_spu special case.
(cooked_write_test): Likewise.
gdb/doc/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* doc/gdb.texinfo (Remote Configuration): Remove documentation for
qXfer:spu:read and qXfer:spu:write.
(General Query Packets): Likewise.
(Cell Broadband Engine SPU architecture): Remove subsection.
gdb/gdbserver/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Remove powerpc-cell32l-ipa.o
and powerpc-cell64l-ipa.o.
(powerpc*-*-linux*): Remove powerpc-cell32l.o and powerpc-cell64l.o
from srv_regobj. Remove rs6000/powerpc-cell32l.xml and
rs6000/powerpc-cell64l.xml from srv_xmlfiles.
(spu*-*-*): Remove.
* spu-low.c: Remove file.
* linux-ppc-low.c (INSTR_SC, NR_spu_run): Remove.
(parse_spufs_run): Remove.
(ppc_get_pc): Remove Cell/B.E. support.
(ppc_set_pc): Likewise.
(ppc_breakpoint_at): Likewise.
(ppc_arch_setup): Likewise.
(ppc_get_ipa_tdesc_idx): Do not handle tdesc_powerpc_cell64l or
tdesc_powerpc_cell32l.
(initialize_low_arch): Do not call init_registers_powerpc_cell64l
or init_registers_powerpc_cell32l.
* linux-ppc-ipa.c (get_ipa_tdesc): Do not handle PPC_TDESC_CELL.
(initialize_low_tracepoint): Do not call init_registers_powerpc_cell64l
or init_registers_powerpc_cell32l.
* linux-ppc-tdesc-init.h (PPC_TDESC_CELL): Mark as unused.
(init_registers_powerpc_cell32l): Remove prototype.
(init_registers_powerpc_cell64l): Likewise.
* target.h (struct target_ops): Remove qxfer_spu member.
* server.c (handle_qxfer_spu): Remove.
(qxfer_packets): Remove entry for "spu".
(handle_query): No longer support qXfer:spu:read or qXfer:spu:write.
* linux-low.c (SPUFS_MAGIC): Remove.
(spu_enumerate_spu_ids): Remove.
(linux_qxfer_spu): Remove.
(linux_target_ops): Remove qxfer_spu member.
* lynx-low.c (lynx_target_ops): Remove qxfer_spu member.
* nto-low.c (nto_target_ops): Remove qxfer_spu member.
* win32-low.c (win32_target_ops): Remove qxfer_spu member.
gdb/testsuite/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/spu-info.exp: Remove file.
* gdb.arch/spu-info.c: Remove file.
* gdb.arch/spu-ls.exp: Remove file.
* gdb.arch/spu-ls.c: Remove file.
* gdb.asm/asm-source.exp: Remove support for spu*-*-*.
* gdb.asm/spu.inc: Remove file.
* gdb.base/dump.exp: Remove support for spu*-*-*.
* gdb.base/stack-checking.exp: Likewise.
* gdb.base/overlays.exp: Likewise.
* gdb.base/ovlymgr.c: Likewise.
* gdb.base/spu.ld: Remove file.
* gdb.cp/bs15503.exp: Remove support for spu*-*-*.
* gdb.cp/cpexprs.exp: Likewise.
* gdb.cp/exception.exp: Likewise.
* gdb.cp/gdb2495.exp: Likewise.
* gdb.cp/mb-templates.exp: Likewise.
* gdb.cp/pr9167.exp: Likewise.
* gdb.cp/userdef.exp: Likewise.
* gdb.xml/tdesc-regs.exp: Remove support for spu*-*-*.
* gdb.cell: Remove directory.
* lib/cell.exp: Remove file.
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
This is for add_setshow_boolean_cmd as well as the gdb::option interface.
gdb/ChangeLog:
2019-09-17 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_ignore_descriptive_types_p): Change to bool.
(print_signatures): Likewise.
(trust_pad_over_xvs): Likewise.
* arch/aarch64-insn.c (aarch64_debug): Likewise.
* arch/aarch64-insn.h (aarch64_debug): Likewise.
* arm-linux-nat.c (arm_apcs_32): Likewise.
* arm-linux-tdep.c (arm_apcs_32): Likewise.
* arm-nbsd-nat.c (arm_apcs_32): Likewise.
* arm-tdep.c (arm_debug): Likewise.
(arm_apcs_32): Likewise.
* auto-load.c (debug_auto_load): Likewise.
(auto_load_gdb_scripts): Likewise.
(global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* auto-load.h (global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* breakpoint.c (disconnected_dprintf): Likewise.
(breakpoint_proceeded): Likewise.
(automatic_hardware_breakpoints): Likewise.
(always_inserted_mode): Likewise.
(target_exact_watchpoints): Likewise.
(_initialize_breakpoint): Update.
* breakpoint.h (target_exact_watchpoints): Change to bool.
* btrace.c (maint_btrace_pt_skip_pad): Likewise.
* cli/cli-cmds.c (trace_commands): Likewise.
* cli/cli-cmds.h (trace_commands): Likewise.
* cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument
to bool*.
* cli/cli-logging.c (logging_overwrite): Change to bool.
(logging_redirect): Likewise.
(debug_redirect): Likewise.
* cli/cli-option.h (option_def) <boolean>: Change return type to bool*.
(struct boolean_option_def) <get_var_address_cb_>: Change return type
to bool.
<boolean_option_def>: Update.
(struct flag_option_def): Change default type of Context to bool
from int.
<flag_option_def>: Change return type of var_address_cb_ to bool*.
* cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*.
(get_setshow_command_value_string): Likewise.
* cli/cli-style.c (cli_styling): Change to bool.
(source_styling): Likewise.
* cli/cli-style.h (source_styling): Likewise.
(cli_styling): Likewise.
* cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change
to bool.
* command.h (var_types): Update comment.
(add_setshow_boolean_cmd): Change int* var argument to bool*.
* compile/compile-cplus-types.c (debug_compile_cplus_types): Change to
bool.
(debug_compile_cplus_scopes): Likewise.
* compile/compile-internal.h (compile_debug): Likewise.
* compile/compile.c (compile_debug): Likewise.
(struct compile_options) <raw>: Likewise.
* cp-support.c (catch_demangler_crashes): Likewise.
* cris-tdep.c (usr_cmd_cris_version_valid): Likewise.
(usr_cmd_cris_dwarf2_cfi): Likewise.
* csky-tdep.c (csky_debug): Likewise.
* darwin-nat.c (enable_mach_exceptions): Likewise.
* dcache.c (dcache_enabled_p): Likewise.
* defs.h (info_verbose): Likewise.
* demangle.c (demangle): Likewise.
(asm_demangle): Likewise.
* dwarf-index-cache.c (debug_index_cache): Likewise.
* dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2read.c (check_physname): Likewise.
(use_deprecated_index_sections): Likewise.
(dwarf_always_disassemble): Likewise.
* eval.c (overload_resolution): Likewise.
* event-top.c (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* event-top.h (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* exec.c (write_files): Likewise.
* fbsd-nat.c (debug_fbsd_lwp): Likewise
(debug_fbsd_nat): Likewise.
* frame.h (struct frame_print_options) <print_raw_frame_arguments>:
Likewise.
(struct set_backtrace_options) <backtrace_past_main>: Likewise.
<backtrace_past_entry> Likewise.
* gdb-demangle.h (demangle): Likewise.
(asm_demangle): Likewise.
* gdb_bfd.c (bfd_sharing): Likewise.
* gdbcore.h (write_files): Likewise.
* gdbsupport/common-debug.c (show_debug_regs): Likewise.
* gdbsupport/common-debug.h (show_debug_regs): Likewise.
* gdbthread.h (print_thread_events): Likewise.
* gdbtypes.c (opaque_type_resolution): Likewise.
(strict_type_checking): Likewise.
* gnu-nat.c (gnu_debug_flag): Likewise.
* guile/scm-auto-load.c (auto_load_guile_scripts): Likewise.
* guile/scm-param.c (pascm_variable): Add boolval.
(add_setshow_generic): Update.
(pascm_param_value): Update.
(pascm_set_param_value_x): Update.
* hppa-tdep.c (hppa_debug): Change to bool..
* infcall.c (may_call_functions_p): Likewise.
(coerce_float_to_double_p): Likewise.
(unwind_on_signal_p): Likewise.
(unwind_on_terminating_exception_p): Likewise.
* infcmd.c (startup_with_shell): Likewise.
* inferior.c (print_inferior_events): Likewise.
* inferior.h (startup_with_shell): Likewise.
(print_inferior_events): Likewise.
* infrun.c (step_stop_if_no_debug): Likewise.
(detach_fork): Likewise.
(debug_displaced): Likewise.
(disable_randomization): Likewise.
(non_stop): Likewise.
(non_stop_1): Likewise.
(observer_mode): Likewise.
(observer_mode_1): Likewise.
(set_observer_mode): Update.
(sched_multi): Change to bool.
* infrun.h (debug_displaced): Likewise.
(sched_multi): Likewise.
(step_stop_if_no_debug): Likewise.
(non_stop): Likewise.
(disable_randomization): Likewise.
* linux-tdep.c (use_coredump_filter): Likewise.
(dump_excluded_mappings): Likewise.
* linux-thread-db.c (auto_load_thread_db): Likewise.
(check_thread_db_on_load): Likewise.
* main.c (captured_main_1): Update.
* maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt,
xx2_opt, boolean_opt>: Change to bool.
* maint-test-settings.c (maintenance_test_settings_boolean): Likewise.
* maint.c (maintenance_profile_p): Likewise.
(per_command_time): Likewise.
(per_command_space): Likewise.
(per_command_symtab): Likewise.
* memattr.c (inaccessible_by_default): Likewise.
* mi/mi-main.c (mi_async): Likewise.
(mi_async_1): Likewise.
* mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise.
* nat/fork-inferior.h (startup_with_shell): Likewise.
* nat/linux-namespaces.c (debug_linux_namespaces): Likewise.
* nat/linux-namespaces.h (debug_linux_namespaces): Likewise.
* nios2-tdep.c (nios2_debug): Likewise.
* or1k-tdep.c (or1k_debug): Likewise.
* parse.c (parser_debug): Likewise.
* parser-defs.h (parser_debug): Likewise.
* printcmd.c (print_symbol_filename): Likewise.
* proc-api.c (procfs_trace): Likewise.
* python/py-auto-load.c (auto_load_python_scripts): Likewise.
* python/py-param.c (union parmpy_variable): Add "bool boolval" field.
(set_parameter_value): Update.
(add_setshow_generic): Update.
* python/py-value.c (copy_py_bool_obj): Change argument from int*
to bool*.
* python/python.c (gdbpy_parameter_value): Cast to bool* instead of
int*.
* ravenscar-thread.c (ravenscar_task_support): Change to bool.
* record-btrace.c (record_btrace_target::store_registers): Update.
* record-full.c (record_full_memory_query): Change to bool.
(record_full_stop_at_limit): Likewise.
* record-full.h (record_full_memory_query): Likewise.
* remote-notif.c (notif_debug): Likewise.
* remote-notif.h (notif_debug): Likewise.
* remote.c (use_range_stepping): Likewise.
(interrupt_on_connect): Likewise.
(remote_break): Likewise.
* ser-tcp.c (tcp_auto_retry): Likewise.
* ser-unix.c (serial_hwflow): Likewise.
* skip.c (debug_skip): Likewise.
* solib-aix.c (solib_aix_debug): Likewise.
* spu-tdep.c (spu_stop_on_load_p): Likewise.
(spu_auto_flush_cache_p): Likewise.
* stack.c (struct backtrace_cmd_options) <full, no_filters, hide>:
Likewise.
(struct info_print_options) <quiet>: Likewise.
* symfile-debug.c (debug_symfile): Likewise.
* symfile.c (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symfile.h (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symtab.c (basenames_may_differ): Likewise.
(struct filename_partial_match_opts) <dirname, basename>: Likewise.
(struct info_print_options) <quiet, exclude_minsyms>: Likewise.
(struct info_types_options) <quiet>: Likewise.
* symtab.h (demangle): Likewise.
(basenames_may_differ): Likewise.
* target-dcache.c (stack_cache_enabled_1): Likewise.
(code_cache_enabled_1): Likewise.
* target.c (trust_readonly): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
(auto_connect_native_target): Likewise.
(target_stop_and_wait): Update.
(target_async_permitted): Change to bool.
(target_async_permitted_1): Likewise.
(may_write_registers_1): Likewise.
(may_write_memory_1): Likewise.
(may_insert_breakpoints_1): Likewise.
(may_insert_tracepoints_1): Likewise.
(may_insert_fast_tracepoints_1): Likewise.
(may_stop_1): Likewise.
* target.h (target_async_permitted): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
* thread.c (struct info_threads_opts) <show_global_ids>: Likewise.
(make_thread_apply_all_options_def_group): Change argument from int*
to bool*.
(thread_apply_all_command): Update.
(print_thread_events): Change to bool.
* top.c (confirm): Likewise.
(command_editing_p): Likewise.
(history_expansion_p): Likewise.
(write_history_p): Likewise.
(info_verbose): Likewise.
* top.h (confirm): Likewise.
(history_expansion_p): Likewise.
* tracepoint.c (disconnected_tracing): Likewise.
(circular_trace_buffer): Likewise.
* typeprint.c (print_methods): Likewise.
(print_typedefs): Likewise.
* utils.c (debug_timestamp): Likewise.
(sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* utils.h (sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* valops.c (overload_resolution): Likewise.
* valprint.h (struct value_print_options) <prettyformat_arrays,
prettyformat_structs, vtblprint, unionprint, addressprint, objectprint,
stop_print_at_null, print_array_indexes, deref_ref, static_field_print,
pascal_static_field_print, raw, summary, symbol_print, finish_print>:
Likewise.
* windows-nat.c (new_console): Likewise.
(cygwin_exceptions): Likewise.
(new_group): Likewise.
(debug_exec): Likewise.
(debug_events): Likewise.
(debug_memory): Likewise.
(debug_exceptions): Likewise.
(useshell): Likewise.
* windows-tdep.c (maint_display_all_tib): Likewise.
* xml-support.c (debug_xml): Likewise.
|
|
For remotes which do not support btrace at all, we can save several
round trips for each thread. This is especially significant when your
remote is a kernel with 100s or 1000s of threads and latency is
intercontinental.
Previously, with target, remote, and infrun debugging enabled, one
might see:
Sending packet: $Hg18aee#43...Ack
Packet received: OK
Sending packet: $Hg186f7#eb...Ack
Packet received: OK
remote:target_xfer_partial (24, , 0x805454000, 0x0, 0x0, 4096) = -1, 0
repeated for all non-exited threads.
Afterwards, if the remote does not specify 'qXfer:btrace-conf:read+'
in qSupported stub features, these unnecessary thread switches are
avoided.
gdb/ChangeLog:
* remote.c (remote_target::remote_btrace_maybe_reopen): Avoid
unnecessary thread walk if remote doesn't support the packet.
|
|
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
I noticed that target_ops::follow_exec took a "char *" parameter,
where "const char *" would be more correct. This patch changes this
(and related functions) to be constified.
Tested by rebuilding.
gdb/ChangeLog
2019-05-22 Tom Tromey <tromey@adacore.com>
* target.c (target_follow_exec): Constify parameter.
* target-delegates.c: Rebuild.
* remote.c (remote_target::follow_exec): Constify parameter.
* infrun.c (follow_exec): Constify parameter.
* target.h (struct target_ops) <follow_exec>: Constify parameter.
(target_follow_exec): Likewise.
|
|
This changes remote.c to use the type-safe registry API.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* remote.c (remote_pspace_data): Change type.
(remote_pspace_data_cleanup): Remove.
(get_remote_exec_file, set_pspace_remote_exec_file)
(_initialize_remote): Update.
|
|
I noticed a three globals in remote.c that could be static. This
patch makes this change.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* remote.c (remote_hw_watchpoint_limit)
(remote_hw_watchpoint_length_limit, remote_hw_breakpoint_limit):
Now static.
|
|
The "watchdog" global is only used in remote.c, so this patch moves it
there and makes it static.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* maint.c (_initialize_maint_cmds): Move initialization code to
remote.c.
(watchdog, show_watchdog): Move to remote.c.
* remote.c (watchdog, show_watchdog): Move from maint.c. Make
"watchdog" static.
(_initialize_remote): Move initialization code from maint.c.
* defs.h (watchdog): Don't declare.
|
|
This changes remote_notif_state::notif_queue to be a std::list and
updates all the uses.
gdb/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* remote.c (remote_target): Use delete.
* remote-notif.h: Include <list>, not "common/queue.h".
(notif_client_p): Remove typedef.
(remote_notif_state): Add constructor, destructor, initializer.
<notif_queue>: Now a std::list.
(remote_notif_state_xfree): Don't declare.
* remote-notif.c (remote_notif_process, handle_notification)
(remote_notif_state_allocate): Update.
(~remote_notif_state): Rename from remote_notif_state_xfree.
|
|
I noticed a few spots where fake_pid_p is handled as an int, whereas
the field in struct inferior has type bool. This patch changes the
remaining places to use bool as well.
Tested by the buildbot.
gdb/ChangeLog
2019-04-09 Tom Tromey <tromey@adacore.com>
* remote.c (remote_target::remote_add_inferior): Change fake_pid_p
to bool.
(extended_remote_target::attach): Update.
(remote_target::remote_notice_new_inferior): Update.
(remote_target::add_current_inferior_and_thread): Update.
* inferior.c (exit_inferior_1): Use "false".
* corelow.c (add_to_thread_list): Make fake_pid_p bool.
|
|
This patch adds a thread_info_to_thread_handle method to the target_ops
struct. It also implements this functionality for remote targets and
linux native threads.
gdb/ChangeLog:
* gdbthread.h (thread_to_thread_handle): Declare.
* thread.c (gdbtypes.h): Include.
(thread_to_thread_handle): New function.
* target.h (struct target_ops): Add thread_info_to_thread_handle.
(target_thread_info_to_thread_handle): Declare.
* target.c (target_thread_info_to_thread_handle): New function.
* target-debug.h (target_debug_print_gdb_byte_vector): Define.
* target-delegates.c: Regenerate.
* linux-thread-db.c (class thread_db_target): Add method
thread_info_to_thread_handle.
(thread_db_target::thread_info_to_thread_handle): Define.
* remote.c (class remote_target): Add new method
thread_info_to_thread_handle.
(remote_target::thread_info_to_thread_handle): Define.
|
|
This replaces throw_exception with "throw;" when possible. This was
written by script. The rule that is followed is that uses of the
form:
catch (... &name)
{
...
throw_exception (name);
}
... can be rewritten. This should always be safe, because exceptions
are caught by const reference, and therefore can't be modified in the
body of the catch.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* valops.c (value_rtti_indirect_type): Replace throw_exception
with throw.
* tracefile-tfile.c (tfile_target_open): Replace throw_exception
with throw.
* thread.c (thr_try_catch_cmd): Replace throw_exception with
throw.
* target.c (target_translate_tls_address): Replace throw_exception
with throw.
* stack.c (frame_apply_command_count): Replace throw_exception
with throw.
* solib-spu.c (append_ocl_sos): Replace throw_exception with
throw.
* s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception
with throw.
* rs6000-tdep.c (rs6000_frame_cache)
(rs6000_epilogue_frame_cache): Replace throw_exception with throw.
* remote.c: Replace throw_exception with throw.
* record-full.c (record_full_message, record_full_wait_1)
(record_full_restore): Replace throw_exception with throw.
* record-btrace.c:
(get_thread_current_frame_id, record_btrace_start_replaying)
(cmd_record_btrace_bts_start, cmd_record_btrace_pt_start)
(cmd_record_btrace_start): Replace throw_exception with throw.
* parse.c (parse_exp_in_context_1): Replace throw_exception with
throw.
* linux-nat.c (detach_one_lwp, linux_resume_one_lwp)
(resume_stopped_resumed_lwps): Replace throw_exception with throw.
* linespec.c:
(find_linespec_symbols): Replace throw_exception with throw.
* infrun.c (displaced_step_prepare, resume): Replace
throw_exception with throw.
* infcmd.c (post_create_inferior): Replace throw_exception with
throw.
* inf-loop.c (inferior_event_handler): Replace throw_exception
with throw.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Replace throw_exception with throw.
* frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle)
(get_prev_frame_always, get_frame_pc_if_available)
(get_frame_address_in_block_if_available, get_frame_language):
Replace throw_exception with throw.
* frame-unwind.c (frame_unwind_try_unwinder): Replace
throw_exception with throw.
* eval.c (fetch_subexp_value, evaluate_var_value)
(evaluate_funcall, evaluate_subexp_standard): Replace
throw_exception with throw.
* dwarf2loc.c (call_site_find_chain)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval):
Replace throw_exception with throw.
* dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception
with throw.
* darwin-nat.c (darwin_attach_pid): Replace throw_exception with
throw.
* cp-abi.c (baseclass_offset): Replace throw_exception with throw.
* completer.c (complete_line_internal): Replace throw_exception
with throw.
* compile/compile-object-run.c (compile_object_run): Replace
throw_exception with throw.
* cli/cli-script.c (process_next_line): Replace throw_exception
with throw.
* btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace)
(btrace_enable, btrace_maint_update_pt_packets): Replace
throw_exception with throw.
* breakpoint.c (create_breakpoint, save_breakpoints): Replace
throw_exception with throw.
* break-catch-throw.c (re_set_exception_catchpoint): Replace
throw_exception with throw.
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Replace throw_exception with throw.
* aarch64-tdep.c (aarch64_make_prologue_cache)
(aarch64_make_stub_cache): Replace throw_exception with throw.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_detach_one_lwp): Replace throw_exception with
throw.
(linux_resume_one_lwp): Likewise.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
|
This changes the exception's "message" member to be a shared_ptr
wrapping a std::string. This allows removing the stack of exception
messages, because now exceptions will self-destruct when needed. This
also adds a noexcept copy constructor and operator= to gdb_exception,
plus a "what" method.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c (gdb_xml_parser::parse): Update.
* x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update.
* value.c (show_convenience): Update.
* unittests/cli-utils-selftests.c (test_number_or_range_parser)
(test_parse_flags_qcs): Update.
* thread.c (thr_try_catch_cmd): Update.
* target.c (target_translate_tls_address): Update.
* stack.c (print_frame_arg, read_frame_local, read_frame_arg)
(info_frame_command_core, frame_apply_command_count): Update.
* rust-exp.y (rust_lex_exception_test): Update.
* riscv-tdep.c (riscv_print_one_register_info): Update.
* remote.c (remote_target::enable_btrace): Update.
* record-btrace.c (record_btrace_enable_warn): Update.
* python/py-utils.c (gdbpy_convert_exception): Update.
* printcmd.c (do_one_display, print_variable_and_value): Update.
* mi/mi-main.c (mi_print_exception): Update.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
* linux-nat.c (linux_nat_target::attach): Update.
* linux-fork.c (class scoped_switch_fork_info): Update.
* infrun.c (displaced_step_prepare): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update.
* gnu-v3-abi.c (print_one_vtable): Update.
* frame.c (get_prev_frame_always): Update.
* f-valprint.c (info_common_command_for_block): Update.
* exec.c (try_open_exec_file): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Update.
* dwarf2-frame.c (dwarf2_build_frame_info): Update.
* dwarf-index-cache.c (index_cache::store)
(index_cache::lookup_gdb_index): Update.
* darwin-nat.c (maybe_cache_shell): Update.
* cp-valprint.c (cp_print_value_fields): Update.
* compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol)
(gcc_cplus_symbol_address): Update.
* compile/compile-c-symbols.c (gcc_convert_symbol)
(gcc_symbol_address, generate_c_for_for_one_variable): Update.
* common/selftest.c: Update.
* common/common-exceptions.h (struct gdb_exception) <message>: Now
a std::string.
(exception_try_scope_entry, exception_try_scope_exit): Don't
declare.
(struct exception_try_scope): Remove.
(TRY): Don't use exception_try_scope.
(struct gdb_exception): Add constructor, operator=.
<what>: New method.
(struct gdb_exception_RETURN_MASK_ALL)
(struct gdb_exception_RETURN_MASK_ERROR)
(struct gdb_exception_RETURN_MASK_QUIT): Add constructor.
(struct gdb_quit_bad_alloc): Update.
* common/common-exceptions.c (exception_none): Change
initializer.
(struct catcher) <state, exception>: Initialize inline.
<prev>: Remove member.
(current_catcher): Remove.
(catchers): New global.
(exceptions_state_mc_init): Simplify.
(catcher_pop): Remove.
(exceptions_state_mc, exceptions_state_mc_catch): Update.
(try_scope_depth, exception_try_scope_entry)
(exception_try_scope_exit): Remove.
(throw_exception_sjlj): Update.
(exception_messages, exception_messages_size): Remove.
(throw_it): Simplify.
(gdb_exception_sliced_copy): Remove.
(throw_exception_cxx): Update.
* cli/cli-script.c (script_from_file): Update.
* breakpoint.c (insert_bp_location, update_breakpoint_locations):
Update.
* ada-valprint.c (ada_val_print): Update.
* ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr)
(create_excep_cond_exprs): Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c (handle_btrace_general_set, handle_qxfer_btrace)
(handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup)
(captured_main, main): Update.
* gdbreplay.c (main): Update.
|
|
Currently the target pid_to_str method returns a const char *, so many
implementations have a static buffer that they update. This patch
changes these methods to return a std::string instead. I think this
is cleaner and avoids possible gotchas when calling pid_to_str on
different ptids in a single statement. (Though no such calls exist
currently.)
This also updates various helper functions, and the gdbarch pid_to_str
methods.
I also made a best effort to fix all the callers, but I can't build
some of the *-nat.c files.
Tested by the buildbot.
gdb/ChangeLog
2019-03-13 Tom Tromey <tromey@adacore.com>
* i386-gnu-nat.c (i386_gnu_nat_target::fetch_registers)
(i386_gnu_nat_target::store_registers): Update.
* target-debug.h (target_debug_print_std_string): New macro.
* x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update.
* windows-tdep.c (display_one_tib): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* top.c (print_inferior_quit_action): Update.
* thread.c (thr_try_catch_cmd): Update.
(add_thread_with_info): Update.
(thread_target_id_str): Update.
(thr_try_catch_cmd): Update.
(thread_command): Update.
(thread_find_command): Update.
* record-btrace.c (record_btrace_target::info_record)
(record_btrace_resume_thread, record_btrace_target::resume)
(record_btrace_cancel_resume, record_btrace_step_thread)
(record_btrace_target::wait, record_btrace_target::wait)
(record_btrace_target::wait, record_btrace_target::stop): Update.
* progspace.c (print_program_space): Update.
* process-stratum-target.c
(process_stratum_target::thread_address_space): Update.
* linux-fork.c (linux_fork_mourn_inferior)
(detach_checkpoint_command, info_checkpoints_command)
(linux_fork_context): Update.
(linux_fork_detach): Update.
(class scoped_switch_fork_info): Update.
(delete_checkpoint_command): Update.
* infrun.c (follow_fork_inferior): Update.
(follow_fork_inferior): Update.
(proceed_after_vfork_done): Update.
(handle_vfork_child_exec_or_exit): Update.
(follow_exec): Update.
(displaced_step_prepare_throw): Update.
(displaced_step_restore): Update.
(start_step_over): Update.
(resume_1): Update.
(clear_proceed_status_thread): Update.
(proceed): Update.
(print_target_wait_results): Update.
(do_target_wait): Update.
(context_switch): Update.
(stop_all_threads): Update.
(restart_threads): Update.
(finish_step_over): Update.
(handle_signal_stop): Update.
(switch_back_to_stepped_thread): Update.
(keep_going_pass_signal): Update.
(print_exited_reason): Update.
(normal_stop): Update.
* inferior.c (inferior_pid_to_str): Change return type.
(print_selected_inferior): Update.
(add_inferior): Update.
(detach_inferior): Update.
* dummy-frame.c (fprint_dummy_frames): Update.
* dcache.c (dcache_info_1): Update.
* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
(btrace_fetch, btrace_clear): Update.
* linux-tdep.c (linux_core_pid_to_str): Change return type.
* i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Change return
type.
* fbsd-tdep.c (fbsd_core_pid_to_str): Change return type.
* sol2-tdep.h (sol2_core_pid_to_str): Change return type.
* sol2-tdep.c (sol2_core_pid_to_str): Change return type.
* gdbarch.c, gdbarch.h: Rebuild.
* gdbarch.sh (core_pid_to_str): Change return type.
* windows-nat.c (struct windows_nat_target) <pid_to_str>: Change
return type.
(windows_nat_target::pid_to_str): Change return type.
(windows_delete_thread): Update.
(windows_nat_target::attach): Update.
(windows_nat_target::files_info): Update.
* target-delegates.c: Rebuild.
* sol-thread.c (class sol_thread_target) <pid_to_str>: Change
return type.
(sol_thread_target::pid_to_str): Change return type.
* remote.c (class remote_target) <pid_to_str>: Change return
type.
(remote_target::pid_to_str): Change return type.
(extended_remote_target::attach, remote_target::remote_stop_ns)
(remote_target::remote_notif_remove_queued_reply)
(remote_target::push_stop_reply, remote_target::disable_btrace):
Update.
(extended_remote_target::attach): Update.
* remote-sim.c (struct gdbsim_target) <pid_to_str>: Change return
type.
(gdbsim_target::pid_to_str): Change return type.
* ravenscar-thread.c (struct ravenscar_thread_target)
<pid_to_str>: Change return type.
(ravenscar_thread_target::pid_to_str): Change return type.
* procfs.c (class procfs_target) <pid_to_str>: Change return
type.
(procfs_target::pid_to_str): Change return type.
(procfs_target::attach): Update.
(procfs_target::detach): Update.
(procfs_target::fetch_registers): Update.
(procfs_target::store_registers): Update.
(procfs_target::wait): Update.
(procfs_target::files_info): Update.
* obsd-nat.c (obsd_nat_target::pid_to_str): Change return type.
* nto-procfs.c (struct nto_procfs_target) <pid_to_str>: Change
return type.
(nto_procfs_target::pid_to_str): Change return type.
(nto_procfs_target::files_info, nto_procfs_target::attach): Update.
* linux-thread-db.c (class thread_db_target) <pid_to_str>: Change
return type.
* linux-nat.c (linux_nat_target::pid_to_str): Change return type.
(exit_lwp): Update.
(attach_proc_task_lwp_callback, get_detach_signal)
(detach_one_lwp, resume_lwp, linux_nat_target::resume)
(linux_nat_target::resume, wait_lwp, stop_callback)
(maybe_clear_ignore_sigint, stop_wait_callback, status_callback)
(save_stop_reason, select_event_lwp, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps)
(linux_nat_target::wait, linux_nat_stop_lwp): Update.
* inf-ptrace.c (inf_ptrace_target::pid_to_str): Change return
type.
(inf_ptrace_target::attach): Update.
(inf_ptrace_target::files_info): Update.
* go32-nat.c (struct go32_nat_target) <pid_to_str>: Change return
type.
(go32_nat_target::pid_to_str): Change return type.
* gnu-nat.c (gnu_nat_target::pid_to_str): Change return type.
(gnu_nat_target::wait): Update.
(gnu_nat_target::wait): Update.
(gnu_nat_target::resume): Update.
* fbsd-nat.c (fbsd_nat_target::pid_to_str): Change return type.
(fbsd_nat_target::wait): Update.
* darwin-nat.c (darwin_nat_target::pid_to_str): Change return
type.
(darwin_nat_target::attach): Update.
* corelow.c (class core_target) <pid_to_str>: Change return type.
(core_target::pid_to_str): Change return type.
* target.c (normal_pid_to_str): Change return type.
(default_pid_to_str): Likewise.
(target_pid_to_str): Change return type.
(target_translate_tls_address): Update.
(target_announce_detach): Update.
* bsd-uthread.c (struct bsd_uthread_target) <pid_to_str>: Change
return type.
(bsd_uthread_target::pid_to_str): Change return type.
* bsd-kvm.c (class bsd_kvm_target) <pid_to_str>: Change return
type.
(bsd_kvm_target::pid_to_str): Change return type.
* aix-thread.c (class aix_thread_target) <pid_to_str>: Change
return type.
(aix_thread_target::pid_to_str): Change return type.
* target.h (struct target_ops) <pid_to_str>: Change return type.
(target_pid_to_str, normal_pid_to_str): Likewise.
* obsd-nat.h (class obsd_nat_target) <pid_to_str>: Change return
type.
* linux-nat.h (class linux_nat_target) <pid_to_str>: Change return
type.
* inf-ptrace.h (struct inf_ptrace_target) <pid_to_str>: Change
return type.
* gnu-nat.h (struct gnu_nat_target) <pid_to_str>: Change return
type.
* fbsd-nat.h (class fbsd_nat_target) <pid_to_str>: Change return
type.
* darwin-nat.h (class darwin_nat_target) <pid_to_str>: Change
return type.
|
