| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
|
|
While the RSP is largely ASCII based (hence the packet buffer type is
char *), at places we pass around 8-bit binary packets in that buffer.
Functions like hex2bin or remote_escape_output conceptually are
handling binary buffers, so I left them as working with gdb_byte, and
added casts where necessary. Whether these are host bytes or target
bytes is blurry at present, so this is largely a matter of taste.
Switching some of these functions to take "char *" or "void *" would
be equally good.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* remote.c (remote_write_bytes_aux, compare_sections_command)
(remote_read_qxfer)
(remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
(remote_hostio_readlink, remote_bfd_iovec_pread)
(remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
binary buffer, and char when buffer is used as string.
* tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
(trace_save, tfile_open, traceframe_walk_blocks)
(tfile_fetch_registers): Likewise.
|
|
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
|
|
Fix GDB regression related to PR binutils/14813.
* jit.c (mem_bfd_iovec_close): Return 0 for success.
* minidebug.c (lzma_close): Add return value comment.
* remote.c (remote_bfd_iovec_close): Return 0 for success.
* solib-spu.c (spu_bfd_iovec_close): Likewise.
* spu-linux-nat.c (spu_bfd_iovec_close): Likewise.
|
|
* remote.c (unpush_and_perror): Add output message final dot.
|
|
The current throw_perror_with_name/TARGET_CLOSE_ERROR calls assume
errno is still set to the right error, although remote_unpush_target
is called in between, which may well change errno.
Tested on x86_64 Fedora 17 w/ gdbserver.
gdb/
2013-04-09 Pedro Alves <palves@redhat.com>
* remote.c (unpush_and_perror): New function.
(readchar, remote_serial_write): Use it.
|
|
* remote.c (remote_trace_find): Change type of parameters 'addr1'
and 'addr2' to CORE_ADDR.
* target.c (update_current_target): Update.
* target.h (struct target_ops) <to_trace_find>: Change parameter
type to CORE_ADDR.
* tracepoint.c (tfind_1): Change type of parameters 'addr1' and
'addr2' to CORE_ADDR.
(tfile_trace_find): Likewise.
(tfile_get_traceframe_address): Change return type to CORE_ADDR.
Change local variable 'addr' to type CORE_ADDR.
* tracepoint.h (tfind_1): Update declaration.
|
|
Revert this patch:
PR gdb/15275
* remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
|
|
PR gdb/15275 notes that when debugging with a remote connection over a
serial link and the link is disconnected, say by disconnecting USB
serial port, the GDB quit command no longer works:
(gdb)
tar ext /dev/ttyACM0
&"tar ext /dev/ttyACM0\n"
~"Remote debugging using /dev/ttyACM0\n"
^done
(gdb)
set debug remote 1
&"set debug remote 1\n"
^done
(gdb)
quit
&"quit\n"
&"Sending packet: $qTStatus#49..."
&"putpkt: write failed: Input/output error.\n"
^error,msg="putpkt: write failed: Input/output error."
(gdb)
(gdb)
quit
&"quit\n"
&"Sending packet: $qTStatus#49..."
&"putpkt: write failed: Input/output error.\n"
^error,msg="putpkt: write failed: Input/output error."
This is not reproducible with TCP connections, as with that, sending
doesn't error out, but instead the error is detected on the subsequent
readchar. When that read fails, we unpush the remote target, and
throw TARGET_CLOSE_ERROR. To address PR gdb/15275, instead of
catching the error in remote_get_trace_status as presently done (which
leaves this same issue latent for another packet to trip on), or of
making ser-unix.c fake success too on failed writes, so we'd get to
readchar detecting the error on serial ports too, better let the error
propagate out of serial_write, and catch it at the remote.c level,
throwing away the target if writing fails too, instead of delaying
that until the next read.
gdb/
2013-04-02 Pedro Alves <palves@redhat.com>
PR gdb/15275
* remote.c (send_interrupt_sequence): Use remote_serial_write.
(remote_serial_write): New function.
(putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
|
|
configuration command.
GDB currently sends a qTStatus even if the target previously replied
an empty packet to a previous qTStatus. If the target doesn't
recognize the packet, there's no point in trying again.
The machinery we have in place is packet_ok, which has the nice side
effect of forcing one to install a configuration command/knob for the
packet in question, which is often handy when you need to debug
things, and/or emulate a target that doesn't support the packet, or even,
it can be used as workaround for the old broken kgdb's that return error
to qTSTatus instead of an empty packet.
gdb/
2013-03-28 Pedro Alves <palves@redhat.com>
* NEWS (New options): New section.
(New options): Mention set/show remote trace-status-packet.
* remote.c (PACKET_qTStatus): New enumeration value.
(remote_get_trace_status): Skip sending qTStatus if the packet is
disabled. Use packet_ok.
(_initialize_remote): Register a configuration command for
qTStatus packet.
gdb/doc/
2013-03-28 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration) <set remote @var{name}-packet
table>: Add entry for "trace-status".
|
|
PR gdb/15275
* remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH.
|
|
It makes no sense to talk about an "unlimited" address size in this
context.
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is 0.
(gdb) set remoteaddresssize 0
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is unlimited.
"set remoteaddresssize 0" mapping to UINT_MAX means you can't
force gdb through this path twice in the same GDB run:
static CORE_ADDR
remote_address_masked (CORE_ADDR addr)
{
unsigned int address_size = remote_address_size;
/* If "remoteaddresssize" was not set, default to target address size. */
if (!address_size)
address_size = gdbarch_addr_bit (target_gdbarch ());
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* remote.c (_initialize_remote): Make "set remoteaddresssize"
a zuinteger command instead of uinteger.
|
|
* exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
* remote.c (trace_error): Remove the special handling of '2'.
(readchar) <SERIAL_EOF>
(readchar) <SERIAL_ERROR>
(getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
(remote_get_trace_status): Call throw_exception if EX is
TARGET_CLOSE_ERROR.
* utils.c (perror_with_name): Rename to ...
(throw_perror_with_name): ... here. New parameter errcode, describe it
in the function comment.
(perror_with_name): New function wrapper.
* utils.h (enum errors): New stub declaration.
(throw_perror_with_name): New declaration.
gdb/testsuite/
* gdb.server/server-kill.c: New file.
* gdb.server/server-kill.exp: New file.
|
|
* remote.c (remote_unpush_target): New function.
(remote_open_1): Remove two pop_target calls, update one comment, add
comment to target_preopen call. Replace pop_target call by
remote_unpush_target call.
(interrupt_query, readchar, getpkt_or_notif_sane_1): Replace
pop_target calls by remote_unpush_target calls.
|
|
Code cleanup.
* bfd-target.c (target_bfd_xclose): Remove parameter quitting.
* bsd-kvm.c (bsd_kvm_close): Likewise.
* bsd-uthread.c (bsd_uthread_close): Likewise.
* corelow.c (core_close): Likewise.
(core_close_cleanup): Remove parameter quitting from a caller.
* event-top.c (async_disconnect): Likewise.
* exec.c (exec_close_1): Remove parameter quitting.
* go32-nat.c (go32_close): Likewise.
* linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
parameter quitting from a caller.
* mips-linux-nat.c (super_close): Remove parameter quitting from the
variable.
(mips_linux_close): Remove parameter quitting. Remove parameter
quitting from a caller.
* monitor.c (monitor_close): Remove parameter quitting.
* monitor.h (monitor_close): Likewise.
* record-btrace.c (record_btrace_close): Likewise.
* record-full.c (record_full_close): Likewise.
* remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
it also from fprintf_unfiltered.
* remote-mips.c (mips_close): Remove parameter quitting.
(mips_detach): Remove parameter quitting from a caller.
* remote-sim.c (gdbsim_close): Remove parameter quitting.
(gdbsim_close): Remove duplicate function comment. Remove parameter
quitting and remove it also from printf_filtered.
* remote.c (remote_close): Remove parameter quitting.
* solib-svr4.c (enable_break): Remove parameter quitting from a caller.
* target.c (update_current_target): Remove parameter int from to_close
de_fault.
(push_target, unpush_target, pop_target): Remove parameter quitting from
a caller.
(pop_all_targets_above, pop_all_targets): Remove parameter quitting.
Remove parameter quitting from a caller.
(target_preopen): Remove parameter quitting from a caller.
(target_close): Remove parameter quitting. Remove parameter quitting
from a caller two times. Remove parameter quitting also from
fprintf_unfiltered.
* target.h (struct target_ops): Remove parameter quitting and as int
from fields to_xclose and to_close.
(extern struct target_ops current_target):
(target_close, pop_all_targets): Remove parameter quitting. Update the
comment.
(pop_all_targets_above): Remove parameter quitting.
* top.c (quit_target): Remove parameter quitting from a caller.
* tracepoint.c (tfile_close): Remove parameter quitting.
* windows-nat.c (windows_close): Remove parameter quitting.
|
|
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
|
|
* remote.c (remote_set_trace_buffer_size): Move != operator
to the start of next line to fix an ARI warning.
|
|
We define the following packets:
Qbtrace:bts enable branch tracing for the current thread
returns "OK" or "Enn"
Qbtrace:off disable branch tracing for the current thread
returns "OK" or "Enn"
qXfer:btrace:read read the full branch trace data for the current thread
gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.
gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.
|
|
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention set and show trace-buffer-size commands.
Mention new packet.
* target.h (struct target_ops): New method
to_set_trace_buffer_size.
(target_set_trace_buffer_size): New macro.
* target.c (update_current_target): Set up new method.
* tracepoint.c (trace_buffer_size): New global.
(start_tracing): Send it to the target.
(set_trace_buffer_size): New function.
(_initialize_tracepoint): Add new setshow for trace-buffer-size.
* remote.c (remote_set_trace_buffer_size): New function.
(_initialize_remote): Use it.
(QTBuffer:size) New remote command.
(PACKET_QTBuffer_size): New enum.
(remote_protocol_features): Add an entry for
PACKET_QTBuffer_size.
gdb/gdbserver/
* tracepoint.c (trace_buffer_size): New global.
(DEFAULT_TRACE_BUFFER_SIZE): New define.
(init_trace_buffer): Change to one-argument function. Allocate
trace buffer memory.
(handle_tracepoint_general_set): Call cmd_bigqtbuffer_size to
handle QTBuffer:size packet.
(cmd_bigqtbuffer_size): New function.
(initialize_tracepoint): Call init_trace_buffer with
DEFAULT_TRACE_BUFFER_SIZE.
* server.c (handle_query): Add QTBuffer:size in the
supported packets.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
trace-buffer-size set and show commands.
(Tracepoint Packets): Document QTBuffer:size.
(General Query Packets): Document QTBuffer:size.
gdb/testsuite/
* gdb.trace/trace-buffer-size.exp: New file.
* gdb.trace/trace-buffer-size.c: New file.
|
|
Move the declarations to a header, rather than declaring them in
(multiple) .c files.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* remote.c (hex2bin, bin2hex): Move extern declarations to ...
* remote.h (hex2bin, bin2hex): ... here.
* tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
|
|
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention new field "trace-file".
* tracepoint.c (trace_status_mi): Output "trace-file" field.
(tfile_open): Record the trace file's filename in the trace
status.
(tfile_files_info): Mention the name of the trace file.
Check the "filename" field explicitely.
(trace_status_command): Explicitely check "filename" field.
(trace_find_command): Ditto.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
* tracepoint.h (struct trace_status) <from_file>: Rename it
to "filename" and make it hold the trace file's filename
instead of a boolean.
* remote.c (remote_get_trace_status): Initialize "filename"
field with NULL instead of 0.
gdb/doc/
* gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
Document the "trace-file" field.
gdb/testsuite/
* gdb.trace/tfile.exp: Add test for -trace-status command.
|
|
* remote.c: Fix a typo.
|
|
replies but don't support qC.
Yao writes:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GDB gets an internal error when it connects to GDBserver started with
'--disable-packet=qC'.
Sending packet: $QNonStop:0#8c...Packet received: OK
Sending packet: $?#3f...Packet received: T0505:00000000;04:00f0ffbf;08:b0c2e44c;thread:p4255.4255;core:1;
Sending packet: $Hc-1#09...Packet received: E01
Sending packet: $qC#b4...Packet received:
Sending packet: $qAttached:a410#bf...Packet received: E01
Packet qAttached (query-attached) is supported
warning: Remote failure reply: E01
Sending packet: $qOffsets#4b...Packet received:
../../../git/gdb/target.c:3248: internal-error: Can't determine the current address space of thread Thread 16981
When start remote, the call chain is as follows,
remote_start_remote
add_current_inferior_and_thread <--[1]
...
start_remote
wait_for_inferior
remote_wait_as
process_stop_reply
get_thread_arch_regcache <--[2]
remote_notice_new_inferior <--[3]
GDB sends packet "qC" in [1] and adds the thread/inferior if the remote
stubs understands "qC". In [2], GDB looks for the inferior to build a
regcache, and notices a new inferior in [3]. As we can see, GDB assumes
that the inferior can be found in [2]. Once the remote stub doesn't
support "qC", GDB can't look for the inferior in [2], and emits an
internal error.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Right after the initial connection, we query the target for its state,
with the ? packet. We store the resulting wait status / stop reply
aside, and query the target for the current thread, using qC, which
fails, so we fake a ptid for the target's thread. We then later,
after the initial setup, end up consuming that set-aside wait status,
parsing the T stop reply, which contains a "thread" "register" (which
was the thread the target would have replied to qC). We get into
trouble because the ptid in that stop reply doesn't match our faked up
ptid in the initial setup, although the target threads are the same...
So we had the T stop reply handy all along. We might as well extract
the thread's ptid from it, and avoid all the resulting issues.
qC is also used after vRun, in order to discover the new process'es
main thread. But, vRun's reply is also a wait status, just like
'?''s, which is quite convenient.
This means that if we have a "Txx thread: ptid" reply, then we don't
really need qC. The patch makes GDB look in the T reply first, and if
not found, try with qC. The packet handling seems to have been added
in gdb-4.18 (1999), and I see that in that same release, "Txx thread:
ptid" didn't exist yet, which probably explains why nobody though of
doing this before.
Regression tested against a gdbserver with qC disabled (and then
enabled), on x86_64 Fedora 17.
2013-01-25 Pedro Alves <palves@redhat.com>
* remote.c (stop_reply_extract_thread): New.
(add_current_inferior_and_thread): New parameter 'wait_status'.
Handle it.
(remote_start_remote): Pass wait status to
add_current_inferior_and_thread.
(extended_remote_run): Update comment.
(extended_remote_create_inferior_1): Pass wait status to
add_current_inferior_and_thread.
|
|
Pedro Alves <palves@redhat.com>
PR remote/14786
* remote.c (remote_threads_info): Make a copy of the reply from
qfThreadInfo and use that instead of rs->buf.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
2012-12-15 Yao Qi <yao@codesourcery.com>
* Makefile.in (REMOTE_OBS): Add "remote-notif.o".
(SFILES): Add "remote-notif.c".
(HFILES_NO_SRCDIR): Add "remote-notif.h" and "common/queue.h".
* remote-notif.c: New. Factored out from remote.c.
* remote-notif.h: New.
* remote.c: Include "remote-notif.h".
(stop_reply_xmalloc, do_stop_reply_xfree):
(remote_parse_stop_reply, remote_get_pending_stop_replies):
(remote_async_get_pending_events_handler): Remove declarations.
(remote_parse_stop_reply): Declare.
(pending_stop_reply): Remove.
(remote_async_get_pending_events_token): Move to
remote-notif.c.
(remote_close): Replace 'delete_async_event_handler' with
remote_notif_unregister_async_event_handler.
Don't call discard_pending_stop_replies.
(remote_start_remote): Replace code with remote_notif_parse
and remote_notif_get_pending_replies.
(remote_open_1): Replace 'create_async_event_handler' with
remote_notif_register_async_event_handler.
(extended_remote_attach_1): Call remote_notif_parse and
notif_stop_reply_push.
(struct stop_reply) <next>: Remove.
<base>: New field.
Callers update.
(stop_reply_queue): Change its type.
(stop_reply_xmalloc, do_stop_reply_xfree): Remove.
(remote_notif_remove_all): New.
(discard_pending_stop_replies): Update.
(remote_notif_stop_ack, stop_reply_dtr): New.
(remote_notif_stop_alloc_event): New.
(notif_client_stop): New variable.
(stop_reply_match_ptid, stop_reply_match_ptid_and_ws: New.
(queued_stop_reply, peek_stop_reply): Adjust.
(remote_get_pending_stop_replies): Rename to
remote_notif_get_pending_events.
(handle_notification): Move to remote-notif.c.
(remote_async_get_pending_events_handler): Likewise.
(remote_wait_as): Adjust to call remote_notif_parse.
Call 'getpkt_or_notif_sane' instead of 'getpkt_sane'.
Return minus_one_ptid early if gets a notification.
(remote_wait): Call QUEUE_is_empty (notif_reply_p).
(_initialize_remote): Call QUEUE_alloc. Update caller.
(remote_resume): Call 'remote_notif_process' in all-stop mode.
* remote.h: Include "remote-notif.h".
(remote_notif_get_pending_replies): Declare.
|
|
2012-12-15 Yao Qi <yao@codesourcery.com>
* remote.c (discard_pending_stop_replies): Update declaration.
(remote_detach_1, extended_remote_mourn_1): Likewise.
(discard_pending_stop_replies): Change parameter from PID to
INF.
(remote_close): Update caller.
(_initialize_remote): Attach discard_pending_stop_replies to
inferior_exit observer.
|
|
2012-12-15 Yao Qi <yao@codesourcery.com>
* remote.c (getpkt_or_notif_sane): Add one more argument in
its declaration.
(getpkt_or_notif_sane_1): Add one more argument.
(getpkt_sane): Update caller.
(getpkt_or_notif_sane): Likewise. Update call
togetpkt_or_notif_sane_1.
(remote_wait_ns): Update caller.
|
|
2012-11-26 Yao Qi <yao@codesourcery.com>
* remote.c (remote_start_remote): Typo fix.
|
|
(get_target_gdbarch): Rename to target_gdbarch.
* gdbarch.c, gdbarch.h: Rebuild.
* ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c,
arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c,
darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c,
filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c,
ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c,
mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c,
mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c,
nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c,
procfs.c, progspace.c, ravenscar-thread.c, record.c,
remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c,
rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c,
solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c,
solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c,
spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c,
target-descriptions.c, target.c, target.h, tracepoint.c,
windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c,
common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/python.c: Update.
|
|
add missing internalization markup.
|
|
* configure.ac (build_warnings): Add -Wempty-body.
* m68k-tdep.c (m68k_gdbarch_init): Remove empty 'if'.
* remote.c (handle_notification): Use braces for empty 'else' body.
* s390-tdep.c (s390_analyze_prologue): Use braces for empty
'else' body.
* sh64-tdep.c (sh64_push_dummy_call): Use braces for empty
'else' body.
* solib-som.c (som_relocate_section_addresses): Use braces
for empty 'else' body.
* ui-file.c (stdio_file_write): Use braces for empty 'if' body.
(stdio_file_write_async_safe, stdio_file_fputs): Likewise.
|
|
* event-top.c (mark_async_signal_handler_wrapper): Remove.
* event-top.h: Remove its declaration.
(async_request_quit): Call mark_async_signal_handler instead of
mark_async_signal_handler_wrapper.
(async_do_nothing, async_disconnect): Likewise.
(async_stop_sig): Likewise.
* remote.c (handle_remote_sigint): Likewise.
(handle_remote_sigint_twice): Likewise.
|
|
* remote.c (remote_get_trace_status): Remove setting default
values of fields of 'ts'.
|
|
there is an error inserting hardware breakpoints and use the
error message from the target.
* gdb/breakpoint.c (insert_bp_location, insert_breakpoint_locations):
Catch this exception and print the error message contained within. Do not
print the default hardware error breakpoint message in this case.
|
|
* cli/cli-cmds.c (max_user_call_depth): Add 'unsigned'.
(init_cmds): Call add_setshow_uinteger_cmd for command
'max-user-call-depth'.
* cli/cli-script.c (execute_user_command): Add 'unsigned' to the
declaration of 'max_user_call_depth'.
* frame.c (backtrace_limit): Add 'unsigned'.
(_initialize_frame): Call add_setshow_uinteger_cmd for command
'limit'.
* remote.c (remoteaddresssize): Add 'unsigned'.
(remote_address_masked): Change local var 'address_size' to
'unsigned'.
(_initialize_remote): Call add_setshow_uinteger_cmd for
'remoteaddresssize'.
* top.c (history_size): Add 'unsigned'.
(show_commands): Change local variables to 'unsigned'.
(set_history_size_command): Don't check history_size is negative.
Adjust the condition to call unstifle_history and set history_size
to UNIT_MAX.
|
|
(clear_quit_flag, check_quit_flag, set_quit_flag): Declare.
(QUIT): Use new functions.
* event-top.c (command_handler): Use clear_quit_flag.
(handle_sigint): Use set_quit_flag.
(async_request_quit): Use check_quit_flag. Don't check
immediate_quit.
* exceptions.c (throw_exception): Use clear_quit_flag.
* main.c (captured_main): Use clear_quit_flag.
* python/python.c (clear_quit_flag, set_quit_flag)
(check_quit_flag): New functions.
* remote-sim.c (gdb_os_poll_quit): Use check_quit_flag,
clear_quit_flag.
* remote.c (remote_wait_as): Use check_quit_flag,
clear_quit_flag.
(remote_start_remote): Call QUIT.
* symfile.c (load_progress): Use check_quit_flag.
* top.c (command_loop): Use clear_quit_flag.
(command_line_input): Call QUIT.
* utils.c (quit_flag): Conditionally define.
(clear_quit_flag, check_quit_flag, set_quit_flag): New
functions.
(prompt_for_continue): Call QUIT. Use quit, not
async_request_quit.
* remote-mips.c (mips_expect_timeout): Call QUIT.
* monitor.c (monitor_expect): Call QUIT.
|
|
* remote.c (handle_notification): Remove parameter 'length'.
(putpkt_binary, getpkt_or_notif_sane_1): Caller update.
|
|
* cli/cli-decode.c (set_cmd_prefix): New.
(lookup_cmd_for_prefixlist): New.
(add_prefix_cmd): Call set_cmd_prefix and update field 'prefix'
of each cmd_list_element in *prefixlist.
(add_setshow_cmd_full): set_cmd_prefix.
(add_alias_cmd): Likewise.
* cli/cli-decode.h (struct cmd_list_element) <prefix>: New field.
Declare 'auto_boolean_enums'.
* cli/cli-setshow.c: Include "observer.h".
(notify_command_param_changed_p): New.
(add_setshow_auto_boolean_cmd): Move auto_boolean_enums out.
Remove 'static'.
(do_setshow_command): Split it to ...
(do_set_command, do_show_command): ... them. New.
(do_set_command): Call observer_notify_command_param_changed if
notify_command_param_changed_p returns true.
(cmd_show_list): Caller update.
* auto-load.c (set_auto_load_cmd): Likewise.
* remote.c (show_remote_cmd): Likewise.
* cli/cli-setshow.h: Update declarations.
* top.c (execute_command): Call do_set_command and do_show_command.
* NEWS: Mention new MI notification.
* mi/mi-interp.c: Declare mi_command_param_changed.
(mi_interpreter_init): Attach mi_command_param_changed to
observer command_param_changed.
(mi_command_param_changed): New.
Remove mi_suppress_breakpoint_notifications.
Define global variable mi_suppress_notification.
(mi_breakpoint_created): Update.
(mi_breakpoint_deleted): Likewise.
(mi_breakpoint_modified): Likewise.
* mi/mi-main.c (mi_cmd_execute): Likewise. Check command
'gdb-set' and set mi_suppress_notification.
* mi/mi-main.h: (mi_suppress_notification): New struct.
gdb/doc/
* observer.texi: New observer command_param_changed.
* gdb.texinfo (GDB/MI Async Records): Doc for '=cmd-param-changed'.
gdb/testsuite/
* gdb.mi/mi-cmd-param-changed.exp: New.
* gdb.mi/mi-cli.exp: Update for MI notification "=cmd-param-changed".
* gdb.mi/mi-var-rtti.exp, gdb.mi/mi2-cli.exp: Likewise.
* gdb.mi/mi2-prompt.exp: Likewise.
|
|
(bfd_openw_with_cleanup): Use gdb_bfd_openw.
* corelow.c (core_open): Use gdb_bfd_fopen.
* dsrec.c (load_srec): Use gdb_bfd_openr.
* exec.c (exec_file_attach): Use gdb_bfd_fopen.
* gcore.c (gcore_memory_sections): Use gdb_bfd_openw.
* gdb_bfd.c (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw)
(gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file)
(gdb_bfd_fdopenr): New functions.
* gdb_bfd.h (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw)
(gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file)
(gdb_bfd_fdopenr): Declare.
* jit.c (bfd_open_from_target_memory): Use gdb_bfd_openr_iovec.
* m32-rom.c (m32r_load, m32r_upload_command): Use gdb_bfd_openr.
* machoread.c (macho_symfile_read_all_oso): Use gdb_bfd_openr,
gdb_bfd_openr_next_archived_file.
(macho_check_dsym): Use gdb_bfd_openr.
(macho_add_oso_symfile): Don't call gdb_bfd_stash_filename.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_fdopenr.
* remote-m32r-sdi.c (m32r_load): Use gdb_bfd_openr.
* remote-mips.c (mips_load_srec, pmon_load_fast): Use
gdb_bfd_openr.
* remote.c (remote_bfd_open): Use gdb_bfd_openr_iovec.
* rs6000-nat.c (add_vmap): Use gdb_bfd_openr, gdb_bfd_fdopenr,
gdb_bfd_openr_next_archived_file.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Use gdb_bfd_openr.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use
gdb_bfd_openr.
* solib-spu.c (spu_bfd_fopen): Use gdb_bfd_openr_iovec.
* solib.c (solib_bfd_fopen): Use gdb_bfd_fopen.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_openr_iovec.
* symfile.c (bfd_open_maybe_remote): Use gdb_bfd_openr.
(symfile_bfd_open): Use gdb_bfd_fopen.
(generic_load): Use gdb_bfd_openr.
* windows-nat.c (windows_make_so): Use gdb_bfd_openr.
|
|
* command.h, remote.c: Fix a typo in comment.
|
|
gdb_bfd_stash_filename.
(load_command): Open the new BFD before freeing the old.
(bfd_open_maybe_remote): Call gdb_bfd_stash_filename.
* symfile-mem.c (symbol_file_add_from_memory): Don't copy name.
Call gdb_bfd_stash_filename.
* spu-linux-nat.c (spu_bfd_open): Don't copy name.
* solib-spu.c (spu_bfd_fopen): Don't copy name. Call
gdb_bfd_stash_filename.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Free found_pathname.
* rs6000-nat.c (add_vmap): Don't copy filename. Call
gdb_bfd_stash_filename.
* remote.c (remote_bfd_open): Call gdb_bfd_stash_filename.
* machoread.c (macho_add_oso_symfile): Call
gdb_bfd_stash_filename.
(macho_symfile_read_all_oso): Arrange to free archive_name. Call
gdb_bfd_stash_filename.
(macho_check_dsym): Don't copy filename. Call
gdb_bfd_stash_filename.
* jit.c (bfd_open_from_target_memory): Don't copy the filename.
* gdb_bfd.c (gdb_bfd_stash_filename): New function.
* gdb_bfd.h (gdb_bfd_stash_filename): Declare.
* gcore.c (create_gcore_bfd): Call gdb_bfd_stash_filename.
* exec.c (exec_close): Don't free the BFD's filename.
(exec_file_attach): Don't copy the filename. Call
gdb_bfd_stash_filename.
* corelow.c (core_close): Don't free the BFD's filename.
(core_open): Call gdb_bfd_stash_filename.
* corefile.c (reopen_exec_file): Remove #if 0 code.
* solib.c (solib_bfd_fopen): Call gdb_bfd_stash_filename. Free
pathname.
* dwarf2read.c (try_open_dwo_file): Call gdb_bfd_stash_filename.
|
|
* NEWS: Mention the additional style.
* breakpoint.h (struct bp_target_info): New fields tcommands, persist.
(struct bp_location): New field cmd_bytecode.
* breakpoint.c: Include format.h.
(disconnected_dprintf): New global.
(parse_cmd_to_aexpr): New function.
(build_target_command_list): New function.
(insert_bp_location): Call it.
(remove_breakpoints_pid): Skip dprintf breakpoints.
(print_one_breakpoint_location): Ditto.
(dprintf_style_agent): New global.
(dprintf_style_enums): Add dprintf_style_agent.
(update_dprintf_command_list): Add agent case.
(agent_printf_command): New function.
(_initialize_breakpoint): Add new commands.
* common/ax.def (printf): New bytecode.
* ax.h (ax_string): Declare.
* ax-gdb.h (gen_printf): Declare.
* ax-gdb.c: Include cli-utils.h, format.h.
(gen_printf): New function.
(maint_agent_print_command): New function.
(_initialize_ax_gdb): Add maint agent-printf command.
* ax-general.c (ax_string): New function.
(ax_print): Add printf disassembly.
* Makefile.in (SFILES): Add format.c
(COMMON_OBS): Add format.o.
* common/format.h: New file.
* common/format.c: New file.
* printcmd.c: Include format.h.
(ui_printf): Call parse_format_string.
* remote.c (remote_state): New field breakpoint_commands.
(PACKET_BreakpointCommands): New enum.
(remote_breakpoint_commands_feature): New function.
(remote_protocol_features): Add new BreakpointCommands entry.
(remote_can_run_breakpoint_commands): New function.
(remote_add_target_side_commands): New function.
(remote_insert_breakpoint): Call it.
(remote_insert_hw_breakpoint): Ditto.
(_initialize_remote): Add new packet configuration for
target-side breakpoint commands.
* target.h (struct target_ops): New field
to_can_run_breakpoint_commands.
(target_can_run_breakpoint_commands): New macro.
* target.c (update_current_target): Handle
to_can_run_breakpoint_commands.
[gdbserver]
* Makefile.in (WARN_CFLAGS_NO_FORMAT): Define.
(ax.o): Add it to build rule.
(ax-ipa.o): Ditto.
(OBS): Add format.o.
(IPA_OBS): Add format.o.
* server.c (handle_query): Claim support for breakpoint commands.
(process_point_options): Add command case.
(process_serial_event): Leave running if there are printfs in
effect.
* mem-break.h (any_persistent_commands): Declare.
(add_breakpoint_commands): Declare.
(gdb_no_commands_at_breakpoint): Declare.
(run_breakpoint_commands): Declare.
* mem-break.c (struct point_command_list): New struct.
(struct breakpoint): New field command_list.
(any_persistent_commands): New function.
(add_commands_to_breakpoint): New function.
(add_breakpoint_commands): New function.
(gdb_no_commands_at_breakpoint): New function.
(run_breakpoint_commands): New function.
* linux-low.c (linux_wait_1): Test for and run breakpoint commands
locally.
* ax.c: Include format.h.
(ax_printf): New function.
(gdb_eval_agent_expr): Add printf opcode.
[doc]
* gdb.texinfo (Dynamic Printf): Mention agent style and
disconnected dprintf.
(Maintenance Commands): Describe maint agent-printf.
(General Query Packets): Mention BreakpointCommands feature.
(Packets): Document commands extension to Z0 packet.
* agentexpr.texi (Bytecode Descriptions): Document printf
bytecode.
[testsuite]
* gdb.base/dprintf.exp: Add agent style tests.
|
|
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): New macro.
(thread_list): Declare.
* infrun.c (handle_inferior_event) <spurious signal>: Don't keep
going, but instead fall through to the stepping handling.
* linux-nat.c (resume_lwp): New parameter 'signo'. Resume with
the passed in signal. Adjust debug output.
(resume_callback): Rename to ...
(linux_nat_resume_callback): ... this. Pass the thread's last
stop signal, if in "pass" state.
(linux_nat_resume): Adjust to rename.
(stop_wait_callback): New assertion. Don't respawn signals;
instead let the LWP remain with SIGNALLED set.
(linux_nat_wait_1): Remove flushing of pending SIGSTOPs.
* remote.c (append_pending_thread_resumptions): New.
(remote_vcont_resume): Call it.
* target.h (target_resume): Extend comment.
gdb/testsuite/
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/siginfo-threads.exp: New file.
* gdb.threads/siginfo-threads.c: New file.
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
|
|
* corefile.c (read_memory, read_stack, write_memory): Accept LEN
argument as ssize_t.
* gdbcore.h (read_memory, read_stack, write_memory): Likewise.
* remote.c (remote_write_bytes_aux, remote_write_bytes): Likewise.
* target.c (target_read_stack, target_write_memory)
(target_write_raw_memory): Likewise.
* target.h (target_read_stack, target_write_memory)
(target_write_raw_memory): Likewise.
|
|
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
* gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_
throughout.
sim/arm/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/avr/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/cr16/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/d10v/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/erc32/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/m32c/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/ppc/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rl78/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rx/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
|
|
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
|
|
* coffread.c (cs_section_address): Passing proper argument for
`bfd_get_section_vma'.
* dwarf2read.c (dwarf2_locate_sections): Likewise, for
`bfd_get_section_flags'.
* remote.c (remote_trace_set_readonly_regions): Likewise, for
`bfd_get_section_vma'.
|
|
* remote.c (async_remote_interrupt): Correct function name in
debug message.
(async_remote_interrupt_twice): Ditto.
|
|
* remote.c (remote_start_remote): Clear `rs->starting_up' on early
returns.
|
