aboutsummaryrefslogtreecommitdiff
path: root/gdb/remote-sim.c
AgeCommit message (Collapse)AuthorFilesLines
1998-02-23Specify correct values for REGISTER_RAW_SIZE.Andrew Cagney1-2/+9
If a SIM/GDB register size botch, warn the user once.
1998-02-17Pass REGISTER_RAW_SIZE to sim_{fetch,store}_register. Verify returnedAndrew Cagney1-6/+12
register size.
1998-02-06When starting a new simulator run, ensure proceed status is cleared.Andrew Cagney1-0/+2
1997-12-16 * remote-sim.c (gdbsim_open): Use "--architecture" instead ofJeff Law1-2/+2
ambigious short form.
1997-12-15When using sigaction() to install cntrl-c handler do not also use signal().Andrew Cagney1-2/+1
1997-12-15(Mostly from Gavin Koch)Andrew Cagney1-0/+12
In dwarf2read.c, if the ABI is 32 bit and 64 bit addresses are encountered discard the most significant 32 bits. Use CORE_ADDR for address variables instead of long. Add more explicit tx49 configur target. Check/use sigaction/SA_RESTART in remote-sim.c
1997-11-27 * remote-sim.c (gdbsim_cntrl_c): Lose ANSI prototype.Jeff Law1-1/+2
1997-09-30 * mips-tdep.c (set_reg_offset): New function.Mark Alexander1-1/+1
(mips16_heuristic_proc_desc): Calculate offsets of registers saved by entry pseudo-op after rest of prologue has been read. Use set_reg_offset to ignore all but the first save of a given register. (mips32_heuristic_proc_desc): Initialize frame adjustment value. * remote-sim.c (gdbsim_store_register): Don't update registers that have a null or empty name. * findvar.c (read_register_bytes): Don't fetch registers that have a null or empty name.
1997-09-26 * config/mips-tm-mips.h (mips_extra_func_info): New frame_adjustMark Alexander1-1/+1
member for storing offset of MIPS16 frame pointer from SP. * mips-tdep.c: Use RA_REGNUM instead of hardcoded 31 throughout. (PROC_FRAME_ADJUST): Define. (mips16_heuristic_proc_desc): Store frame pointer adjustment value. (get_frame_pointer): Use frame pointer adjustment value when calculating frame address. * remote-sim.c (gdbsim_fetch_register): Don't fetch registers that have a null or empty name. start-sanitize-tx19 * config/mips/tm-tx19.h (MIPS_DEFAULT_FPU_TYPE): Define. (REGISTER_NAMES): Redefine to eliminate FP registers. * config/mips/tm-tx19l.h: Ditto. end-sanitize-tx19
1997-09-25 * The following block of changes add support for debugging assemblyStu Grossman1-2/+51
source files. * breakpoint.c (resolve_sal_pc): Prevent crash when pc isn't associated with a function. * buildsym.c (record_line start_symtab end_symtab): Don't delete symtabs which only have line numbers (but no other debug symbols). * dbxread.c (read_dbx_symtab end_psymtab): Ditto. * remote-sim.c: New functions gdbsim_insert/remove_breakpoint. Use intrinsic simulator breakpoints if available, otherwise do it the hard way. * configure.tgt: Add d30v. * d30v-tdep.c: New file. * config/d30v/d30v.mt, config/d30v/tm-d30v.h: New files.
1997-08-28New commands ``set architecture'', ``show architecture'' and ``infoAndrew Cagney1-1/+12
architecture''. Update SH target to use new target_architecture_hook.
1997-08-27Only pass endianess to simulator when explicitly set by user with setAndrew Cagney1-8/+23
endian. Prepend endian argument so that it can be overriden with target sim -ARGS.
1997-08-27Add ABFD argument to sim_create_inferior. Document.Andrew Cagney1-19/+26
Add file sim-hload.c - generic load for hardware only simulators. Review each simulators sim_open, sim_load, sim_create_inferior so that they more closely match required behavour.
1997-08-25Add ABFD argument to sim_open call. Pass through to sim_config soAndrew Cagney1-1/+1
that image properties such as endianness can be checked. More strongly document the expected behavour of each of the sim_* interfaces. Add default endian argument to simulator config macro SIM_AC_OPTION_ENDIAN. Use in sim_config.
1997-06-13 * config/i386/nm-linux.h: Enable prototypes that were #ifdef out.Fred Fish1-0/+5
* config/tm-sysv4.h (in_plt_section): Add prototype. * maint.c (maintenance_translate_address): Avoid assignment inside if, per GNU coding standards. * symfile.c (simple_read_overlay_table): Avoid assignments inside if, per GNU coding standards. * monitor.c (parse_register_dump): Is really a void function. Add prototype. (monitor_read_memory): Remove unused variable "name". (monitor_read_memory): Remove unused variable "regbuf". (monitor_open): Remove unused variable "i". (get_hex_word): Apparently unused, #if away for now. (from_hex): Ditto. * i386v4-nat.c (supply_fpregset): Remove unused variable "regi". (fill_fpregset): Remove unused variables "regi", "to", "from" and "registers". * remote-e7000.c (ctype.h): Include. (e7000_insert_breakpoint): #if away unused arg used by unused expr. * frame.h (generic_get_saved_register): Add prototype. (enum lval_type): Add partial forward decl. * dsrec.c (make_srec): Remove unused variable "type_code". * remote-sim.c (gdbsim_wait): Handle sim_running and sim_polling cases by just ignoring them. (command.h): Include. * java-exp.y (parse_number): Remove unused variable "unsigned_p". * java-lang.c (gdbcore.h): Include for prototypes. (type_from_class): Remove unused variable "ftype". (type_from_class): Remove unused variable "name_length". (evaluate_subexp_java): Add default case to handle remaining enumerations. * java-valprint.c (c-lang.h): Include for prototypes. * symfile.c (simple_read_overlay_region_table): #if away unused function. (simple_free_overlay_region_table): Ditto. (overlay_is_mapped): Add default case to switch. (simple_read_overlay_region_table): Ditto. (simple_read_overlay_region_table): Add prototype. * symtab.c (fixup_symbol_section): Remove unused msym variable. (fixup_psymbol_section): Ditto. (find_pc_sect_symtab): Make distance a CORE_ADDR. * utils.c: Add comment about t_addr being either unsigned long or unsigned long long. (paddr): Change formats to match actual types args are cast to. (preg): Ditto. (paddr_nz): Ditto. (preg_nz): Ditto.
1997-06-06sim_kill() isn't used.Andrew Cagney1-1/+2
1997-05-22Restrict simulator commands to an enabled simulator.Andrew Cagney1-8/+17
1997-05-20Depreciate sim_set_callbacks() function. Set simulator callbacksAndrew Cagney1-5/+3
during sim_open().
1997-05-08Part II of getting GdbTk's stop button to always work.Andrew Cagney1-26/+29
1997-04-18 * remote-sim.c (gdbsim_open): Only pass -E to sim_open ifDavid Edelsohn1-3/+8
TARGET_BYTE ORDER_SELECTABLE.
1997-04-18Ref gdb/11763 - can't stop a running simulator:Andrew Cagney1-9/+79
o Provide poll_quit callback to simulators so that they can poll for SIGINT on clueless OS's. o Add sim_stop to simulators so that clients can request a halt (eg gdbtk's STOP button) Works for PPC! o Re-arange remote-sim.c so that the hard work is moved from gdbsim_resume() to gdbsim_wait() (where it should be).
1997-04-17 * remote-sim.c (gdbsim_load): Update call to sim_load.David Edelsohn1-12/+11
(gdbsim_create_inferior): No longer pass start_address to sim_create_inferior. (gdbsim_open): Pass endian indicator as arg.
1997-04-02 * remote-sim.c (gdbsim_open): Check return code from sim_open.David Edelsohn1-3/+3
1997-03-28Fix faulty assumption that va_list is a pointer typeMichael Meissner1-8/+8
1997-03-22 * remote-sim.c (simulator_command): Add comment about dealing withFred Fish1-1/+2
NULL or empty args. start-sanitize-tic80 * Makefile.in (tic80-tdep.o): Add target. * configure.tgt: Add tic80 case. * tic80-tdep.c: New file. * config/tic80/{tic80.mt, tm-tic80.h}: New files. end-sanitize-tic80
1997-03-21 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSIJeff Law1-2/+4
compilers. (gdb_os_evprintf_filtered): Similarly.
1997-03-17* remote-sim.h: Delete - moved to ../include/remote-sim.h.Andrew Cagney1-0/+87
* Makefile.in (remote_utils_h): Update path to remote-sim.h. * remote-sim.c (flush_stdout, write_stderr, flush_stderr, vprintf_filtered, evprintf_filtered): Callbacks that accept varargs.
1997-03-13 * remote-sim.h (sim_state, SIM_DESC): New types.David Edelsohn1-21/+44
(sim_open): Return a `descriptor' as result. (*): New argument of descriptor result from sim_open. * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p. (gdbsim_open): Record result of sim_open in gdbsim_desc. Pass argv list to sim_open, argv[0] = pseudo program name. (*): Pass gdbsim_desc to sim_foo fns.
1997-02-18 * remote-sim.c (init_callbacks): Undo previous change.Mark Alexander1-3/+1
1997-02-18 * maint.c: Fix dereference of pointer.Dawn Perchik1-1/+3
* remote-sim.c: Fix reference of structure member "last_error". * debugify.c: Include config.h to get ANSI definitions.
1996-12-30 * remote-sim.c (gdbsim_open_p): New static local.David Edelsohn1-1/+20
(gdbsim_open): Call unpush_target if sim open. Set gdbsim_open_p. (gdbsim_close): Only call sim_close if sim open. Reset gdbsim_open_p.
1996-12-09 * remote-sim.h: Update some comments.David Edelsohn1-6/+43
* remote-sim.c (gdb_os_error): New function. (init_callbacks): Fix initializing of gdb_callback. Add gdb_os_error. (gdb_os_printf_filtered): Use gdb_stdout, not stdout.
1996-11-20 * callback.h: Deleted, moved to ../include.David Edelsohn1-7/+95
* callback.c: Deleted, moved to ../sim/common. * Makefile.in (SFILES,COMMON_OBJS): Delete callback.[co]. (callback.o): Delete rule. * remote-sim.h: No longer include callback.h (sim_callback_write_stdout): Delete prototype. * remote-sim.c (init_callbacks,end_callbacks): New functions. (gdb_os_write_stdout, gdb_os_printf_filtered): New functions. (gdb_callback, callbacks_initialized): New static globals. (gdbsim_open): Call init_callbacks. (gdbsim_close): Call end_callbacks. (simulator_command): Call init_callbacks.
1996-11-08 * remote-sim.c (simulator_command): Set up callbacks beforeStan Shebs1-3/+7
entering the simulator.
1996-08-13 * defs.h: Define CONST_PTR as blank if compiling with MicrosoftStu Grossman1-1/+38
C, else it's `const'. * c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c scm-lang.c: Microsoft C can't hack const pointers. Use CONST_PTR macro instead. * configure configure.in defs.h: Use AC_C_CONST to figure out if the compiler supports const. Gets rid of some cruft in defs.h. * dwarf2read.c: <string.h> -> "gdb_string.h" * remote-sim.c: Add prototypes. Fix call to gdbsim_kill. * sparcl-tdep.c (download): Add prototypes to write_routine and start_routine args. * mswin/gdbwin.c: Don't include both varargs.h AND stdarg.h. Get rid of varargs.h Include string.h. * (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f update): Fix prototypes, fix calls. * (update): Return value for catch_errors. * (run_execute_command togdb_command_from_tty togdb_command): Cleanup catching of errors from calls to execute_command. Also, dup command string to avoid modifying const strings. * (togdb_breakinfo_i_init togdb_breakinfo_i_next): Use 0 instead of NULL when see if b->address isn't set. * (bi_disable_bpt bi_enable_bpt bi_delete_all bi_delete_breakpoint): Add arg to calls to update. * (gui_command): Add prototype. * (mswin_query): Fix prototype. * (_initialize_gdbwin): Dup string to avoid modifying const. * (info_path togdb_get_info_path): Remove const from decls cuz this can't be const (it points at malloc'ed memory). * (togdb_searchpath): Remove const from path. Dup string to avoid modifying const strings. * rindex -> strrchr. * (gdbwin_list_symbols): Regexp param is const. * Fix lots of refs to psymtabs to deref correct pointers. * (togdb_set_breakpoint_sal): Call set_breakpoint_sal with sal, not &sal. * mswin/gdbwin.h (togdb_searchpath togdb_get_info_path toget_set_info_path): Fix prototypes to match reality. * mswin/gui.cpp: Define _beginthreadex and _endthreadex routines with proper prototypes. * mswin/iface.cpp (gdbwin_fputs): Define with correct number of args. * mswin/ser-win32s.c: Fix defs of min and max. * mswin/serdll32.c (OpenComm16): Make cbInQueue and cbOutQueue be USHORT. * (WriteComm16): Change lpBug from LPVOID to LPCSTR. * mswin/serdll32.h: Fix prototypes for OpenComm16 and WriteComm16.
1996-05-15 * coffread.c (coff_symtab_read): Handle C_LABEL symbols likeJeff Law1-0/+3
C_STAT symbols. * h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly. Flush cached frames just before exiting. * remote-sim.c (gdbsim_resume): Complain if the program isn't being run. * config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define. Fix some bugs exposed by the testsuite. HMSE.
1995-11-06Moved the "sim_open" call to after the callback initialisation. ThisJackie Smith Cashion1-1/+2
is to allow the simulator initialisation code to make use of the host callback facilities. Had discussed this with sac, and it should be a harmless change since none of the other simulators really make use of the call, and it does not return a result.
1995-10-07Modify last patch based on advice from Stu.Jim Wilson1-3/+4
1995-10-06Changes to make the simulator work again.Jim Wilson1-0/+4
* callback.c (fdbad): Fix typo in comment. (os_close, os_isatty, os_lseek, os_read, os_write): Use if statements rather than || to get correct return value. (os_write_stdout): Pass missing first argument to os_write. * remote-sim.c: Include callback.h. (_initialize_remote_sim): Call sim_set_callbacks and then initialize the callbacks.
1995-09-29Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com>Steve Chamberlain1-22/+1
* callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-20Wed Sep 20 08:16:03 1995 steve chamberlain <sac@slash.cygnus.com>Steve Chamberlain1-2/+2
* defs.h (xmalloc, xrealloc): Delete, they're declared in libiberty.h. (GETENV_PROVIDED, FCLOSE_PROVIDED): New. * doc/gdbint.texinfo (GETENV_PROVIDED, FCLOSE_PROVIDED): Document. * remote-sim.[ch] (sim_callback_write_stdout): New.
1995-09-20Wed Sep 20 08:16:03 1995 steve chamberlain <sac@slash.cygnus.com>Steve Chamberlain1-0/+19
* defs.h (xmalloc, xrealloc): Delete, they're declared in libiberty.h. (GETENV_PROVIDED, FCLOSE_PROVIDED): New. * doc/gdbint.texinfo (GETENV_PROVIDED, FCLOSE_PROVIDED): Document. * remote-sim.[ch] (gdbsim_write_stdout): New.
1995-09-15 * remote-sim.c (gdbsim_create_inferior): Back out change thatStu Grossman1-6/+0
broke all simulator configurations except the rs6000.
1995-09-10Sun Sep 10 10:24:48 1995 Michael Tiemann <tiemann@axon.cygnus.com>Michael Tiemann1-0/+6
* tm-ppc-eabi.h (PC_IN_CALL_DUMMY): Redefine this to work with the simulator. FIXME. * rs6000-tdep.c (push_dummy_frame): Calculate the correct link register offset from the current frame (don't assume it is always 8). (push_dummy_frame): Add comment about having only 4096 bytes of stack space in the simulator (by default). * remote-sim.c (gdbsim_create_inferior): Call `add_text_to_loadinfo' so that gdb can find TOC entries when calling functions in the inferior. With this changes, it is now possible to correctly call inferior functions in the PPC simulator.
1995-08-02Update FSF address.Fred Fish1-1/+1
1995-08-01* configure.in: Check for working mmap, ansi headers, string.h,J.T. Conklin1-1/+1
strings.h, and memory.h. * configure: Regenerated. * gdb_stat.h: New file, "portable" <sys/stat.h>. * gdb_string.h: New file, "portable" <string.h>. * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c, convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c, gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c, i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c, mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c, rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c, symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c, ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h" instead of <sys/stat.h>. * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c, ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c, core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c, dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c, exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c, fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c, inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c, m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c, monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c, printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c, remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c, remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c, remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c, solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c, symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c, valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include "gdb_string.h" instead of <string.h>. * gdbtk.c: Likewise. * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h, sparc/xm-sun4os4.h (HAVE_MMAP): Removed. * config/xm-lynx.h, config/i386/xm-ptx.h, config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h, config/mips/xm-irix3.h, config/mips/xm-mips.h, config/mips/xm-news-mips.h, config/mips/xm-riscos.h, config/pa/hppah.h, config/rs6000/xm-rs6000.h, config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h, config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h, config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed. * config/mips/xm-irix3.h, config/mips/xm-mips.h, config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
1995-07-13 * inftarg.c (child_thread_alive): New function to see if aJeff Law1-0/+1
particular thread is still running. (child_ops): Add child_thread_alive entry. * remote.c (remote_thread_alive): New function to see if a particular thread is still alive. (remote_ops): Add remote_thread_alive. * target.c (dummy_target): Add dummy entry for thread_alive. (cleanup_target): de_fault thread_alive too. (update_current_target): INHERIT thread_alive too. (debug_to_thread_alive): New function. (setup_target_debug): Add debug_to_thread_alive. * target.h (struct target_ops): Add to_thread_alive. (target_thread_alive): Define. * thread.c (info_threads_command): Don't call kill; use target_thread_alive instead. * config/nm-lynx.h (CHILD_THREAD_ALIVE): Define. * gdbserver/low-lynx.c (mythread_alive): New function. (mywait): Don't restart any threads after a new thread notification, let the generic code handle it. * gdbserver/low-sparc.c (mythread_alive): Dummy version. * gdbserver/low-sun3.c (mythread_alive): Likewise. * gdbserver/server.c (main): Handle thread_alive requests. * gdbserver/server.h (mythread_alive): Declare. * corelow.c (core_ops): Add dummy entry for thread_alive. * exec.c (exec_ops): Likewise. * m3-nat.c (m3_ops): Likewise. * monitor.c (monitor_ops): Likewise. * procfs.c (procfs_ops): Likewise. * remote-arc.c (arc_ops): Likewise. * remote-array.c (array_ops): Likewise. * remote-e7000.c (e7000_ops): Likewise. * remote-es.c (es1800_ops, es1800_child_ops): Likewise. * remote-mips.c (mips_ops): Likewise. * remote-pa.c (remote_hppro_ops): Likewise. * remote-sim.c (gdbsim_ops): Likewise. * sparcl-tdep.c (sparclite_ops): Likewise. More lynx-6100 work
1995-07-01 * config/h8300/h8300.mt: Renamed from h8300hms.mt.Stan Shebs1-25/+55
* config/h8500/h8500.mt: Renamed from h8500hms.mt. * config/z8k/z8k.mt: Renamed from z8ksim.mt. * configure, configure.in: Update to reflect renamings. * remote-sim.c (sim): New command, passes commands to simulator. (simulator_command): New function. (gdbsim_ops): Clean up. * remote-sim.h (sim_do_command): Declare. * sh-tdep.c (memory_size): Remove command. * Makefile.in (SIM, SIM_OBS): New variables. (CLIBS, CDEPS): Add value of SIM. (DEPFILES): Add value of SIM_OBS * config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt, config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt, config/z8k/z8k.mt: Remove simulator files from TDEPFILES, define in SIM_OBS and SIM. config/sparc/sp64sim.mt (SIMFILES): Remove. * remote-z8k.c: Remove, was superseded by remote-sim.c * Makefile.in, mpw-make.in: Remove references to remote-z8k.c.
1994-11-03 * corelow.c, exec.c, inftarg.c, m3-nat.c, op50-rom.c, procfs.c,Stu Grossman1-0/+1
remote-adapt.c, remote-e7000.c, remote-eb.c, remote-es.c, remote-hms.c, remote-mips.c, remote-mm.c, remote-mon.c, remote-nindy.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-vx.c, remote-z8k.c, remote.c, w89k-rom.c, target.c, target.h: Add support for target_stop(). * gdbtk.c (gdb_stop): Switch to target_stop(). * ChangeLog: Fix comment to make shebs happy...
1994-08-10(gdbsim_ops): Set `to_insert_breakpoint' and `to_remove_breakpoint' fields.David Edelsohn1-1/+2