| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
|
|
There's no need for the prog_name handed down to the core to be mutable,
so add const markings to it and all the related funcs.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* windows-nat.c (windows_stop): Add 'self' argument.
* target.h (struct target_ops) <to_stop>: Add argument.
* target.c (target_stop): Add argument.
(debug_to_stop): Add argument.
(update_current_target): Update.
* remote.c (remote_stop): Add 'self' argument.
* remote-sim.c (gdbsim_stop): Add 'self' argument.
(gdbsim_cntrl_c): Update.
* remote-m32r-sdi.c (m32r_stop): Add 'self' argument.
* procfs.c (procfs_stop): Add 'self' argument.
* nto-procfs.c (procfs_stop): Add 'self' argument.
* monitor.c (monitor_stop): Add 'self' argument.
(monitor_open): Update.
* linux-nat.c (linux_nat_stop): Add argument.
* inf-ptrace.c (inf_ptrace_stop): Add 'self' argument.
* gnu-nat.c (gnu_stop): Add 'self' argument.
* darwin-nat.c (darwin_stop): Add 'self' argument.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_load>: Add argument.
* target.c (target_load): Add argument.
(debug_to_load): Add argument.
(update_current_target): Update.
* remote.c (remote_load): Add 'self' argument.
* remote-sim.c (gdbsim_load): Add 'self' argument.
* remote-mips.c (mips_load): Add 'self' argument.
* remote-m32r-sdi.c (m32r_load): Add 'self' argument.
* monitor.c (monitor_load): Add 'self' argument.
* m32r-rom.c (m32r_load_gen): Add 'self' argument.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* windows-nat.c (windows_close): Add 'self' argument.
* tracepoint.c (tfile_close): Add 'self' argument.
* target.h (struct target_ops) <to_close>: Add argument.
* target.c (target_close): Add argument.
(update_current_target): Update.
* remote.c (remote_close): Add 'self' argument.
* remote-sim.c (gdbsim_close): Add 'self' argument.
* remote-mips.c (mips_close): Add 'self' argument.
* remote-m32r-sdi.c (m32r_close): Add 'self' argument.
* record-full.c (record_full_close): Add 'self' argument.
* record-btrace.c (record_btrace_close): Add 'self' argument.
* monitor.h (monitor_close): Add 'self' argument.
* monitor.c (monitor_close): Add 'self' argument.
* mips-linux-nat.c (mips_linux_close): Add 'self' argument.
* linux-nat.c (linux_nat_close): Add argument.
* go32-nat.c (go32_close): Add 'self' argument.
* exec.c (exec_close_1): Add 'self' argument.
* ctf.c (ctf_close): Add 'self' argument.
* corelow.c (core_close): Add 'self' argument.
(core_close_cleanup): Update.
* bsd-uthread.c (bsd_uthread_close): Add 'self' argument.
* bsd-kvm.c (bsd_kvm_close): Add 'self' argument.
|
|
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
|
|
Hi,
This patch replaces -1 with TARGET_XFER_E_IO in the implementations of
to_xfer_partial and their callees. This change is quite mechanical,
and makes the next patch shorter.
gdb:
2014-02-07 Yao Qi <yao@codesourcery.com>
* auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
(ld_so_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise.
(darwin_xfer_partial): Likewise.
* exec.c (exec_xfer_partial): Likewise.
* gnu-nat.c (gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo): Likewise.
(linux_proc_xfer_spu): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_qxfer): Likewise.
(remote_write_qxfer, remote_read_qxfer): Likewise.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
(spu_xfer_partial): Likewise.
* target.c (memory_xfer_partial_1): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
|
|
2013-12-17 Tom Tromey <tromey@redhat.com>
* windows-nat.c (windows_prepare_to_store): Add 'self' argument.
* target.h (struct target_ops) <to_prepare_to_store>: Add
argument.
(target_prepare_to_store): Add argument.
* target.c (debug_to_prepare_to_store): Add argument.
(update_current_target): Update.
* remote.c (remote_prepare_to_store): Add 'self' argument.
* remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
* remote-mips.c (mips_prepare_to_store): Add 'self' argument.
* remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
* record-full.c (record_full_core_prepare_to_store): Add 'self'
argument.
* ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
* nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
* monitor.c (monitor_prepare_to_store): Add 'self' argument.
* inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
* go32-nat.c (go32_prepare_to_store): Add 'self' argument.
|
|
This patch changes to_xfer_partial's len's type to ULONGEST, and
adjust its implementations.
gdb:
2014-01-14 Yao Qi <yao@codesourcery.com>
* target.h (target_xfer_partial_ftype): Update.
(struct target_ops) <to_xfer_partial>: Change 'len' type to
ULONGEST.
* aix-thread.c (aix_thread_xfer_partial): Change type of
argument 'len' to ULONGEST.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv): Likewise.
(memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_write_inferior): Likewise. Use
'%u'.
(darwin_read_dyld_info): Likewise.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
instead of plongest.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
(ia64_hpux_xfer_partial): Likewise.
* ia64-linux-nat.c (ia64_linux_xfer_partial):
* inf-ptrace.c (inf_ptrace_xfer_partial):
* inf-ttrace.c (inf_ttrace_xfer_partial):
* linux-nat.c (linux_xfer_siginfo): Likewise.
(linux_nat_xfer_partial): Likewise.
(spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
(linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
instead of plongest.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_xfer_partial): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
* rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
declaration.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* target.c (target_read_live_memory): Likewise.
(memory_xfer_live_readonly_partial): Likewise.
(memory_xfer_partial, memory_xfer_partial_1): Likewise.
(target_xfer_partial, default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise. Call
pulongest instead of plongest.
(windows_xfer_partial): Likewise.
(windows_xfer_shared_libraries): Likewise.
|
|
This replaces XZALLOC with XCNEW and removes XZALLOC.
This change is purely mechanical.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XZALLOC): Remove.
* ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* auto-load.c (get_auto_load_pspace_data): Likewise.
* auxv.c (get_auxv_inferior_data): Likewise.
* bfd-target.c (target_bfd_reopen): Likewise.
* breakpoint.c (get_catch_syscall_inferior_data): Likewise.
(deprecated_insert_raw_breakpoint): Likewise.
* bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
* corelow.c (core_open): Likewise.
* darwin-nat.c (darwin_check_new_threads): Likewise.
(darwin_attach_pid): Likewise.
* dummy-frame.c (dummy_frame_push): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
* eval.c (ptrmath_type_p): Likewise.
* exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
* gdbtypes.c (alloc_type_arch): Likewise.
(alloc_type_instance): Likewise.
* hppa-tdep.c (hppa_gdbarch_init): Likewise.
* inf-child.c (inf_child_can_use_agent): Likewise.
* inflow.c (get_inflow_inferior_data): Likewise.
* infrun.c (save_infcall_suspend_state): Likewise.
* jit.c (jit_reader_load): Likewise.
(get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_open_impl): Likewise.
(jit_symtab_open_impl): Likewise.
(jit_block_open_impl): Likewise.
(jit_frame_sniffer): Likewise.
* linux-fork.c (add_fork): Likewise.
* maint.c (make_command_stats_cleanup): Likewise.
* objfiles.c (get_objfile_pspace_data): Likewise.
* opencl-lang.c (struct lval_closure): Likewise.
* osdata.c (osdata_start_osdata): Likewise.
* progspace.c (new_address_space): Likewise.
(add_program_space): Likewise.
* remote-sim.c (get_sim_inferior_data): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* skip.c (Ignore): Likewise.
(skip_delete_command): Likewise.
* solib-aix.c (get_solib_aix_inferior_data): Likewise.
(library_list_start_library): Likewise.
(solib_aix_current_sos): Likewise.
* solib-darwin.c (get_darwin_info): Likewise.
(darwin_current_sos): Likewise.
* solib-dsbt.c (get_dsbt_info): Likewise.
* solib-ia64-hpux.c (new_so_list): Likewise.
(ia64_hpux_get_solib_linkage_addr): Likewise.
* solib-spu.c (append_ocl_sos): Likewise.
(spu_current_sos): Likewise.
* solib-svr4.c (get_svr4_info): Likewise.
(svr4_keep_data_in_core): Likewise.
(library_list_start_library): Likewise.
(svr4_default_sos): Likewise.
(svr4_read_so_list): Likewise.
* solib-target.c (library_list_start_library): Likewise.
(solib_target_current_sos): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* symfile-debug.c (install_symfile_debug_logging): Likewise.
* symfile.c (default_symfile_segments): Likewise.
* target-descriptions.c (tdesc_data_init): Likewise.
(tdesc_create_reg): Likewise.
(struct tdesc_type *): Likewise.
(tdesc_create_vector): Likewise.
(tdesc_set_struct_size): Likewise.
(struct tdesc_type *): Likewise.
(tdesc_free_feature): Likewise.
(tdesc_create_feature): Likewise.
* windows-nat.c (windows_add_thread): Likewise.
(windows_make_so): Likewise.
* xml-support.c (gdb_xml_body_text): Likewise.
(gdb_xml_create_parser_and_cleanup): Likewise.
(xml_process_xincludes): Likewise.
* xml-syscall.c (allocate_syscalls_info): Likewise.
(syscall_create_syscall_desc): Likewise.
|
|
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
gdb/ChangeLog:
* remote-sim.c (gdbsim_detach): Break declaration into
shorter lines. No code change.
|
|
2013-11-11 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* remote-sim.c (gdbsim_detach): Fix prototype.
|
|
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
|
|
Tested by building for --target=arm-eabi, and playing with the debug
output a bit.
gdb/
2013-09-06 Pedro Alves <palves@redhat.com>
* remote-sim.c (dump_mem, gdbsim_fetch_register)
(gdbsim_store_register, gdbsim_kill, gdbsim_load)
(gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
(gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
gdb_stdlog.
|
|
Manually tested with a --target=arm-eabi build, and doing things like:
$ arm-eabi-gcc ~/gdb/tests/main.c -o a.out -c -g
$ ./gdb a.out
...
(gdb) tar sim
(gdb) load
(gdb) disassemble 0
Dump of assembler code for function main:
0x00000000 <+0>: mov r12, sp
0x00000004 <+4>: push {r11, r12, lr, pc}
0x00000008 <+8>: sub r11, r12, #4
0x0000000c <+12>: sub sp, sp, #8
0x00000010 <+16>: str r0, [r11, #-16]
0x00000014 <+20>: str r1, [r11, #-20]
0x00000018 <+24>: mov r3, #0
0x0000001c <+28>: mov r0, r3
0x00000020 <+32>: sub sp, r11, #12
0x00000024 <+36>: ldm sp, {r11, sp, pc}
End of assembler dump.
(gdb) p *0 = 1
0x00000001
gdb/
2013-09-06 Pedro Alves <palves@redhat.com>
* remote-sim.c (dump_mem): Constify buf parameter.
gdbsim_xfer_inferior_memory): Rename to ...
(gdbsim_xfer_memory): ... this. Adjust interface as
target_xfer_partial helper.
(gdbsim_xfer_partial): New function.
(init_gdbsim_ops): Don't install a deprecated_xfer_memory hook.
Install a to_xfer_partial hook. Send output to gdb_stdlog.
|
|
Manually tested with a --target=arm-eabi build, and doing
$ arm-eabi-gcc ~/gdb/tests/main.c -o a.out -c -g
$ ./gdb a.out
...
(gdb) tar sim
(gdb) load
(gdb) set debug remote 1
(gdb) disassemble 0
Dump of assembler code for function main:
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x0, len 4, write 0
0x00000000 <+0>: 0xe1a0c00d
mov r12, sp
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x4, len 4, write 0
0x00000004 <+4>: 0xe92dd800
push {r11, r12, lr, pc}
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x8, len 4, write 0
0x00000008 <+8>: 0xe24cb004
sub r11, r12, #4
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0xc, len 4, write 0
0x0000000c <+12>: 0xe24dd008
sub sp, sp, #8
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x10, len 4, write 0
0x00000010 <+16>: 0xe50b0010
str r0, [r11, #-16]
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x14, len 4, write 0
0x00000014 <+20>: 0xe50b1014
str r1, [r11, #-20]
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x18, len 4, write 0
0x00000018 <+24>: 0xe3a03000
mov r3, #0
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x1c, len 4, write 0
0x0000001c <+28>: 0xe1a00003
mov r0, r3
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x20, len 4, write 0
0x00000020 <+32>: 0xe24bd00c
sub sp, r11, #12
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x24, len 4, write 0
0x00000024 <+36>: 0xe89da800
ldm sp, {r11, sp, pc}
End of assembler dump.
(gdb) p *0 = 1
gdbsim_xfer_inferior_memory: myaddr 0xc69bc0, memaddr 0x0, len 4, write 1
0x00000001
$1 = 1
Which happens to differ from before, I think due to stdout line buffering:
(gdb) disassemble 0
Dump of assembler code for function main:
0x00000000 <+0>: gdbsim_xfer_inferior_memory: myaddr 0x0x7fffffffd400, memaddr 0x0, len 4, write 0
0xe1a0c00d
But the new output looks reasonable to me, better even.
gdb/
2013-09-06 Pedro Alves <palves@redhat.com>
* remote-sim.c (gdbsim_xfer_inferior_memory): Use
host_address_to_string, and send debug output to gdb_stdlog.
|
|
This patch fixes the target double-close problem (PR remote/15266),
and in the process removes pop_target entire (PR remote/15256).
The first issue is that pop_target calls target_close. However, it
then calls unpush_target, which also calls target_close. This means
targets must be able to be closed twice. Not only is this strange,
but it also directly contradicts the contract of to_xclose targets.
(We currently have just a single such target, and it is never pushed;
but I plan to add more, and so this latent bug is triggered.)
The second issue is that it seems to me that calling pop_target is
often unsafe. This is what cropped up in 15256, where the remote
target assumed that it could pop_target -- but there was another
target higher on the stack, leading to confusion.
But, it is always just as easy to call unpush_target as it is to call
pop_target; and it is also safer. So, removing pop_target seemed like
an improvement.
Finally, this adds an assertion to target_close to ensure that no
currently-pushed target can be closed.
Built and regtested on x86-64 Fedora 18; both natively and using the
native-gdbserver board file.
PR remote/15256, PR remote/15266:
* bfd-target.c (target_bfd_reopen): Initialize to_magic.
* monitor.c (monitor_detach): Use unpush_target.
* remote-m32r-sdi.c (m32r_detach): Use unpush_target.
* remote-mips.c (mips_detach): Use unpush_target. Don't
call mips_close.
* remote-sim.c (gdbsim_detach): Use unpush_target.
* target.c (pop_target): Remove.
(pop_all_targets_above): Don't call target_close.
(target_close): Assert that the target is unpushed.
* target.h (pop_target): Don't declare.
* tracepoint.c (tfile_open): Use unpush_target.
|
|
* remote-sim.c (dump_mem): Change the type of 'buf' parameter from
'char *' to 'gdb_byte *'.
(gdbsim_store_register): Change the type of 'tmp' from 'char' to
'gdb_byte'.
|
|
Code cleanup.
* bfd-target.c (target_bfd_xclose): Remove parameter quitting.
* bsd-kvm.c (bsd_kvm_close): Likewise.
* bsd-uthread.c (bsd_uthread_close): Likewise.
* corelow.c (core_close): Likewise.
(core_close_cleanup): Remove parameter quitting from a caller.
* event-top.c (async_disconnect): Likewise.
* exec.c (exec_close_1): Remove parameter quitting.
* go32-nat.c (go32_close): Likewise.
* linux-nat.c (linux_nat_close): Remove parameter quitting. Remove
parameter quitting from a caller.
* mips-linux-nat.c (super_close): Remove parameter quitting from the
variable.
(mips_linux_close): Remove parameter quitting. Remove parameter
quitting from a caller.
* monitor.c (monitor_close): Remove parameter quitting.
* monitor.h (monitor_close): Likewise.
* record-btrace.c (record_btrace_close): Likewise.
* record-full.c (record_full_close): Likewise.
* remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
it also from fprintf_unfiltered.
* remote-mips.c (mips_close): Remove parameter quitting.
(mips_detach): Remove parameter quitting from a caller.
* remote-sim.c (gdbsim_close): Remove parameter quitting.
(gdbsim_close): Remove duplicate function comment. Remove parameter
quitting and remove it also from printf_filtered.
* remote.c (remote_close): Remove parameter quitting.
* solib-svr4.c (enable_break): Remove parameter quitting from a caller.
* target.c (update_current_target): Remove parameter int from to_close
de_fault.
(push_target, unpush_target, pop_target): Remove parameter quitting from
a caller.
(pop_all_targets_above, pop_all_targets): Remove parameter quitting.
Remove parameter quitting from a caller.
(target_preopen): Remove parameter quitting from a caller.
(target_close): Remove parameter quitting. Remove parameter quitting
from a caller two times. Remove parameter quitting also from
fprintf_unfiltered.
* target.h (struct target_ops): Remove parameter quitting and as int
from fields to_xclose and to_close.
(extern struct target_ops current_target):
(target_close, pop_all_targets): Remove parameter quitting. Update the
comment.
(pop_all_targets_above): Remove parameter quitting.
* top.c (quit_target): Remove parameter quitting from a caller.
* tracepoint.c (tfile_close): Remove parameter quitting.
* windows-nat.c (windows_close): Remove parameter quitting.
|
|
2013-03-15 Steve Ellcey <sellcey@mips.com>
* remote-sim.c (sim_command_completer): Make char arguments const.
include:
2013-03-15 Steve Ellcey <sellcey@mips.com>
* gdb/remote-sim.h (sim_command_completer): Make char arguments const.
sim:
2013-03-15 Steve Ellcey <sellcey@mips.com>
* arm/wrapper.c (sim_complete_command): Make char arguments const.
* avr/interp.c (sim_complete_command): Ditto.
* common/sim-options.c (sim_complete_command): Ditto.
* cr16/interp.c (sim_complete_command): Ditto.
* erc32/interf.c (sim_complete_command): Ditto.
* m32c/gdb-if.c (sim_complete_command): Ditto.
* microblaze/interp.c (sim_complete_command): Ditto.
* ppc/sim_calls.c (sim_complete_command): Ditto.
* rl78/gdb-if.c (sim_complete_command): Ditto.
* rx/gdb-if.c (sim_complete_command): Ditto.
* sh/interp.c (sim_complete_command): Ditto.
|
|
gdb_byte should be used for bytes from the program being debugged. We
have many places using char or unsigned char instead all over the
existing ports, and more ends up added over time due to copy/paste as
new code is based on old code.
I've greped the tree for "char buf[", and fixed all I found.
Tested by building with --enable-targets=all.
2013-03-01 Pedro Alves <palves@redhat.com>
Use gdb_byte for bytes from the program being debugged.
* arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
Change type of local 'buf' to gdb_byte.
* avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
(frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Likewise.
* frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
(hppa32_hpux_search_dummy_call_sequence)
(hppa_hpux_supply_save_state): Likewise.
* hppa-linux-tdep.c (insns_match_pattern)
(hppa_linux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_in_function_epilogue_p)
(skip_prologue_hard_way, hppa_frame_cache): Likewise.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
* i386fbsd-tdep.c (i386fbsd_supply_uthread)
(i386fbsd_collect_uthread): Likewise.
* ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
* ia64-tdep.c (examine_prologue, ia64_frame_cache)
(ia64_frame_prev_register, ia64_sigtramp_frame_cache)
(ia64_sigtramp_frame_prev_register, ia64_access_reg)
(ia64_access_rse_reg, ia64_libunwind_frame_this_id)
(ia64_libunwind_frame_prev_register)
(ia64_libunwind_sigtramp_frame_this_id)
(ia64_find_global_pointer_from_dynamic_section)
(find_extant_func_descr, find_func_descr, ia64_dummy_id)
(ia64_unwind_pc): Likewise.
* iq2000-tdep.c (iq2000_store_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call)
(m68hc11_extract_return_value): Likewise.
* m68klinux-nat.c (fetch_register, store_register): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
(mep_get_insn, mep_push_dummy_call): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips_linux_in_dynsym_stub): Likewise.
* mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* regcache.c (dump_endian_bytes): Change type of parameter 'buf'
to gdb_byte.
* remote-mips.c (mips_set_register): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* score-tdep.c (score7_fetch_inst): Change type of parameter
'memblock' and local 'buf' to gdb_byte.
(score7_malloc_and_get_memblock): Change return type to gdb_byte.
Change type of local 'buf' to gdb_byte. Adjust.
(score7_adjust_memblock_ptr): Change type of parameter 'memblock'
to gdb_byte**.
(score7_analyze_prologue): Change type of 'memblock' and
'memblock_ptr' locals to gdb_byte*.
* sh64-tdep.c (sh64_extract_return_value)
(sh64_store_return_value): Change type of local 'buf' to gdb_byte.
* solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
* solib-pa64.c (pa64_solib_create_inferior_hook)
(pa64_open_symbol_file_object): Remove local 'buf'.
* solib-som.c (som_solib_create_inferior_hook, link_map_start)
(som_open_symbol_file_object): Likewise.
* solib-spu.c (spu_current_sos): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
(spu_store_registers): Likewise.
* target.c (debug_print_register): Likewise.
* tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
* xstormy16-tdep.c (xstormy16_store_return_value)
(xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
(xstormy16_find_jmp_table_entry): Likewise.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
(get_target_gdbarch): Rename to target_gdbarch.
* gdbarch.c, gdbarch.h: Rebuild.
* ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c,
arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c,
darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c,
filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c,
ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c,
mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c,
mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c,
nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c,
procfs.c, progspace.c, ravenscar-thread.c, record.c,
remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c,
rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c,
solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c,
solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c,
spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c,
target-descriptions.c, target.c, target.h, tracepoint.c,
windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c,
common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/python.c: Update.
|
|
gdb/ChangeLog
* remote-sim.c (gdbsim_create_inferior): Call init_thread_list to
reset thread numbering back to 1.
|
|
gdb/ChangeLog
* remote-sim.c (dump_mem): Always dump buffer contents, zero fill
output and use uint32_t not long to ensure 4 byte size.
|
|
* remote-sim.c (_initialize_remote_sim): Pass NULL argument to
`register_inferior_data_with_cleanup', fixing regression on PowerPC64.
|
|
(clear_quit_flag, check_quit_flag, set_quit_flag): Declare.
(QUIT): Use new functions.
* event-top.c (command_handler): Use clear_quit_flag.
(handle_sigint): Use set_quit_flag.
(async_request_quit): Use check_quit_flag. Don't check
immediate_quit.
* exceptions.c (throw_exception): Use clear_quit_flag.
* main.c (captured_main): Use clear_quit_flag.
* python/python.c (clear_quit_flag, set_quit_flag)
(check_quit_flag): New functions.
* remote-sim.c (gdb_os_poll_quit): Use check_quit_flag,
clear_quit_flag.
* remote.c (remote_wait_as): Use check_quit_flag,
clear_quit_flag.
(remote_start_remote): Call QUIT.
* symfile.c (load_progress): Use check_quit_flag.
* top.c (command_loop): Use clear_quit_flag.
(command_line_input): Call QUIT.
* utils.c (quit_flag): Conditionally define.
(clear_quit_flag, check_quit_flag, set_quit_flag): New
functions.
(prompt_for_continue): Call QUIT. Use quit, not
async_request_quit.
* remote-mips.c (mips_expect_timeout): Call QUIT.
* monitor.c (monitor_expect): Call QUIT.
|
|
|
|
* remote-sim.c (sim_command_completer): Initialize
variable 'result'.
|
|
The profile of command completers has been change to returna VEC
of char_ptr. Most completers were updated, except the one in
remote-sim.c.
Unfortunately, to make things a little more difficult, the meat of
the completer is actually implemented in the sim, were VECs are not
available. This patch thus translates the returned array into a VEC,
and then returns that VEC.
gdb/ChangeLog:
* remote-sim.c (sim_command_completer): Change type of return
value to "VEC (char_ptr) *". Adjust implementation accordingly.
|
|
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
* gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_
throughout.
sim/arm/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/avr/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/cr16/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/d10v/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/erc32/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/m32c/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/ppc/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rl78/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rx/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
|
|
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
|
|
* ppc-linux-nat.c (ppc_linux_get_hwcap): Make static.
* remote-sim.c (gdbsim_has_all_memory): Likewise.
(gdbsim_has_memory): Likewise.
|
|
The current gdbsim_create_inferior func doesn't check the return value
of sim_create_inferior which can be problematic when that func doesn't
return success. So, if it fails, call error() and be done.
Reported-by: Richard Stuckey <richard.stuckey@arc.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
Since gdb sets up a nice sysroot path for us by default, automatically
pass it down to the sim target so it too gets a good default. This does
not override anything the user explicitly specifies of course.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
For now, only the sub-command name is completed. No support yet for
completing options to that command. But even this is a huge step as
currently, nothing is completed, and the basic "help sim" is fairly
obtuse as to what exactly the "sim" command accepts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.
|
|
* nto-procfs.c: Comment cleanup, mostly periods and spaces.
* nto-tdep.c: Ditto.
* nto-tdep.h: Ditto.
* objc-exp.y: Ditto.
* objc-lang.c: Ditto.
* objfiles.c: Ditto.
* objfiles.h: Ditto.
* observer.c: Ditto.
* opencl-lang.c: Ditto.
* osabi.c: Ditto.
* parse.c: Ditto.
* parser-defs.h: Ditto.
* p-exp.y: Ditto.
* p-lang.c: Ditto.
* posix-hdep.c: Ditto.
* ppcbug-rom.c: Ditto.
* ppc-linux-nat.c: Ditto.
* ppc-linux-tdep.c: Ditto.
* ppc-linux-tdep.h: Ditto.
* ppcnbsd-tdep.c: Ditto.
* ppcobsd-tdep.c: Ditto.
* ppcobsd-tdep.h: Ditto.
* ppc-sysv-tdep.c: Ditto.
* ppc-tdep.h: Ditto.
* printcmd.c: Ditto.
* proc-abi.c: Ditto.
* proc-flags.c: Ditto.
* procfs.c: Ditto.
* proc-utils.h: Ditto.
* progspace.h: Ditto.
* prologue-value.c: Ditto.
* prologue-value.h: Ditto.
* psympriv.h: Ditto.
* psymtab.c: Ditto.
* p-typeprint.c: Ditto.
* p-valprint.c: Ditto.
* ravenscar-sparc-thread.c: Ditto.
* ravenscar-thread.c: Ditto.
* ravenscar-thread.h: Ditto.
* record.c: Ditto.
* regcache.c: Ditto.
* regcache.h: Ditto.
* remote.c: Ditto.
* remote-fileio.c: Ditto.
* remote-fileio.h: Ditto.
* remote.h: Ditto.
* remote-m32r-sdi.c: Ditto.
* remote-mips.c: Ditto.
* remote-sim.c: Ditto.
* rs6000-aix-tdep.c: Ditto.
* rs6000-nat.c: Ditto.
* rs6000-tdep.c: Ditto.
|
|
|
|
`target_has_execution' check with `to_has_memory' check.
(gdbsim_has_all_memory, gdbsim_has_memory): New functions.
(init_gdbsym_ops): Initialize relevant fields of `gdbsim_ops'
with `gdbsim_has_all_memory' and `gdbsim_has_memory'.
|
|
(resume_siggnal, resume_step): Move these static globals...
(struct sim_inferior_data): ...into this new struct.
(sim_inferior_data_key, next_pid, sim_argv, gdbsim_is_open):
New static globals.
(gdb_callback, callbacks_initialized): Move these globals to
a point earlier in the file.
(check_for_duplicate_sim_descriptor, get_sim_inferior_data)
(get_sim_inferior_data_by_ptid, sim_inferior_data_cleanup)
(gdbsim_close_inferior, gdbsim_resume_inferior)
(gdbsim_stop_inferior): New functions.
(SIM_INSTANCE_NOT_NEEDED, SIM_INSTANCE_NEEDED, INITIAL_PID):
New constants.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_load)
(gdbsim_create_inferior, gdbsim_open, gdbsim_close, gdbsim_resume)
(gdbsim_stop, gdbsim_cntrl_c, gdbsim_wait)
(gdbsim_xfer_inferior_memory, gdbsim_files_info)
(gdbsim_mourn_inferior, simulator_command, gdbsim_thread_alive,
(gdbsim_pid_to_str): Invoke `get_sim_inferior_data' to set
new local variable `sim_data' in each of these functions. Use
`sim_data' to reference former globals `program_loaded',
`gdbsim_desc', `remote_sim_ptid', `resume_siggnal', and
`resume_step'.
(gdbsim_open): Remove local variable `argv'. Put results of call
to `gdb_buildargv' in `sim_argv' rather than in `argv'. Don't
make a cleanup for it. Free it though when a sim instance cannot
be obtained.
(gdbsim_close): Free sim_argv and null it out as appropriate.
Close sim instances in all inferiors.
(gdbsim_cntrl_c): Stop all inferiors.
(gdbsim_wait):
(_initialize_remote_sim): Initialize `sim_inferior_data_key'.
|
|
* record.c: White space.
* regcache.c: White space.
* reggroups.c: White space.
* remote-fileio.c: White space.
* remote-m32r-sdi.c: White space.
* remote-mips.c: White space.
* remote-sim.c: White space.
|
|
* cli/cli-cmds.h (error_no_arg): Remove. Move the comment ...
* command.h (error_no_arg): ... here. Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Remove.
(perror_with_name, verror, error, error_stream, vfatal, fatal)
(internal_verror, internal_error, nomem): Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* exceptions.c (throw_exception, deprecated_throw_reason, throw_verror)
(throw_vfatal, throw_error): Remove NORETURN.
(throw_it): Remove NORETURN, change ATTR_NORETURN to ATTRIBUTE_NORETURN.
* exceptions.h (throw_exception, throw_verror, throw_vfatal)
(throw_error, deprecated_throw_reason): Remove NORETURN, change
ATTR_NORETURN to ATTRIBUTE_NORETURN.
* linespec.c (cplusplus_error): Remove NORETURN, change ATTR_NORETURN
to ATTRIBUTE_NORETURN for prototype, for the definition only remove
NORETURN.
* remote-mips.c (mips_error): Change NORETURN to ATTRIBUTE_NORETURN.
* remote-sim.c (gdb_os_error): Change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
* target.c (tcomplain): Likewise.
* target.h (noprocess): Remove NORETURN, change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
* utils.c (verror, error, vfatal, fatal, error_stream, internal_verror)
(internal_error, perror_with_name, nomem): Remove NORETURN.
* xml-support.h (gdb_xml_error): Change ATTR_NORETURN to
ATTRIBUTE_NORETURN.
gdb/doc/
* gdbint.texinfo (Host Definition): Remove items NORETURN and
ATTR_NORETURN.
|
|
The sim and m32r remote targets declare a local "file" variable and only
assign const strings to it before passing it to a printf() func. So add
const markings to avoid gcc warnings like:
gdb/remote-sim.c: In function 'gdbsim_files_info':
gdb/remote-sim.c:789: warning: initialization discards qualifiers
from pointer target type
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Automatic update by copyright.sh.
|
|
inferior_appeared_silent.
* remote-sim.c (gdbsim_create_inferior): Ditto.
|
|
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
|
