| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Document callbacks needed.
(sim_*): Change result to void where there isn't one.
(sim_open): Clarify argument and error response.
(sim_close): Declare.
(sim_load): Change bfd_handle argument to file name. Clarify result.
(sim_create_inferior): Renamed from sim_set_args.
(sim_set_pc): Delete.
(sim_info): Delete printf_fn argument.
* remote-sim.c (gdbsim_kill): Add comment describing purpose.
(gdbsim_load): Try sim_load first.
(gdbsim_create_inferior): Call sim_create_inferior.
(gdbsim_open): Handle args == NULL. Update call to sim_open.
(gdbsim_close): Call sim_close.
(gdbsim_files_info): Update call to sim_info.
(gdbsim_ops): Realign comments.
|
|
* Move target_signal_from_host, target_signal_to_host, and
store_waitstatus from inftarg.c to target.c. procfs needs them.
* target.c: Include "wait.h" and <signal.h>.
* target.h, infrun.c (proceed), proceed callers: Pass new code
TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
enums being treated as unsigned and is cleaner.
* infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
TARGET_SIGNAL_0.
* infcmd.c (signal_command), infrun.c (signals_info):
Don't allow user to specify numeric equivalent of
TARGET_SIGNAL_DEFAULT.
|
|
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
|
|
|
|
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
|
|
it compiles with non-ANSI compilers.
|
|
(sim_set_pc): Update prototype.
(sim_read, sim_write): Ditto, and use unsigned char *buf.
(sim_fetch_register, sim_store_register): Use unsigned char *buf.
(sim_info): Pass printf function as argument, add verbose argument.
(sim_stop_reason): Renamed from sim_stop_signal, fix prototype.
* remote-sim.c (gdbsim_wait): Update call to sim_stop_reason.
(gdbsim_files_info): Update call to sim_info.
|
|
(sim_stop_signal): Change prototype, result is enum sim_stop.
* remote-sim.c (gdbsim_wait): Update call to sim_stop_signal.
|
|
Thread-specific breakpoint support.
* breakpoint.h (struct breakpoint): Add thread id field.
* fork-child.c (fork_inferior): Move call to init_thread_list()
back a bit so that init_trace_fun can do thread functions.
* hppa-tdep.c (restore_pc_queue): Add pid to call to target_wait.
* hppab-nat.c (child_resume): Handle default pid.
* hppah-nat.c (child_resume): Handle default pid.
* i386lynx-nat.c (child_wait): New arg pid.
* inflow.c (kill_command): Reset thread list.
* infptrace.c (child_resume): Handle default pid.
* infrun.c: Thread-specific breakpoint support.
* inftarg.c (child_wait): Add pid arg.
* osfsolib.c (solib_create_inferior_hook): Add pid to call to
target_resume.
* procfs.c: Multi-thread support.
* remote-bug.c (bug_wait): Add pid arg.
* remote-hms.c (hms_wait): Add pid arg.
* remote-mips.c (mips_wait): Add pid arg.
* remote-mon.c (monitor_wait): Add pid arg.
* remote-nindy.c (nindy_wait): Add pid arg.
* remote-sim.c (gdbsim_wait): Add pid arg.
* remote-udi.c (udi_wait): Add pid arg.
* remote-vx.c (vx_wait): Add pid arg.
* remote-z8k.c (sim_wait): Add pid arg.
* remote.c (remote_wait): Add pid arg.
* solib.c (solib_create_inferior_hook): Add pid to call to
target_resume.
* target.h (struct target_ops): Add pid arg to to_wait and
to_notice_signals.
* thread.c (valid_thread_id): New func to validate thread #s.
* (pid_to_thread_id): New func to do the obvious.
* thread.h: Prototypes for above.
* coff-solib.c (coff_solib_add): Use nameoffset field to locate
filename.
|
|
|
|
xcoffsolib.h: Use 'abfd' for bfd variables instead of 'bfd'.
Sun cc doesn't like variable names that match their typedef'd type.
|
|
* remote-sim.c: Include remote-utils.h.
* target.h: Add comment about target_has_execution.
|
|
New functions.
* infrun.c (normal_stop): Don't try and set the pc in the current
frame coredump if there isn't one.
* remote-sim.c (gdbsim_store_register): Don't
SWAP_TARGET_AND_HOST, sim_store_register takes bytes in raw order.
(gdbsim_wait): Set status with WSETSTOP.
* config/h8300/tm-h8300.h (sr_get_debug): Define
|
|
* remote-sim.c: Add remote debug feature. Rename stuff to distinguish
interface to simulator from gdb-specific stuff. Other changes.
start-sanitize-v9
* remote-sp64sim.c: Renamed to remote-sim.c.
Use sr_get_debug instead of our own sim_verbose/simif_snoop.
Use gnutarget in call to bfd_openr.
Rename simif_* to gdbsim_*.
* config/sparc/sp64sim.mt: Change remote-sp64sim.c to remote-sim.c.
end-sanitize-v9
|
|
* core.c: Add commands to set and show it.
* Callers to bfd_*open*: Pass gnutarget instead of NULL as target.
* environ.c (set_in_environ): For GNUTARGET, use set_gnutarget not
putenv.
* symtab.c (decode_line_1): Give error on unmatched single quote.
|
|
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
|
|
of reading/writing registers that are shorter than REGISTER_TYPE.
* (value_from_register): Install H8500 specific code to return
proper value when register is being used as a pointer.
* h8500-tdep.c: Remove extra defines of NUM_REGS.
(h8500_skip_prologue): Use correct lengths for LINK instructions.
(FRAME_CHAIN): Change name to h8500_frame_chain. Rewrite code to
chain frames properly by combining frame pointer with T reg.
(init_extra_frame_info): Delete. It's now a macro.
(frame_args_address): Don't add PTR_SIZE. Stack args are already
offset by the correct amount off of the frame pointer.
(register_byte): Delete. It's now a macro.
(register_raw_size, register_virtual_size): Delete. Replaced by
common routine h8500_register_size, cuz there's no difference
between the raw & virtual sizes on this machine.
(register_convert_to_raw, register_convert_to_virtual): Delete,
cuz there's no difference between the raw & virtual forms.
Replaced by memcpy in tm file.
(register_virtual_type): Rename to h8500_register_virtual_type.
Get rid of pointer pseudo-regs, use _REGNUM with all reg names.
(_initialize_h8500_tdep): Get rid of crock to ensure that GDB &
emulator have same reg offsets. This is all handled in the
simulator code now.
(h8500_trapped_internalvar): New routine to detect references to
convenience vars acting as pointer pseudo-regs.
(h8500_value_trapped_internalvar): Conjure up value of pointer
pseudo-regs.
(h8500_set_trapped_internalvar): Convert set value in real
register references.
infcmd.c (read_pc, write_pc): Add h8500 specific code to handle
code segment register.
infrun.c (proceed): Simplify. Call write_pc instead of doing it
by hand.
(wait_for_inferior): Add h8500 specific code to add stack segment
when reading SP register.
remote-sim.c (fetch_register): Spacing.
tm-h8500.h: #define GDB_TARGET_IS_H8500 to make it easier to
detect cruft. Redo all register manipulation stuff. Get rid of
pointer pseudo-regs. (INIT_EXTRA_FRAME_INFO): Adds stack segment
to frame pointer. (IS_TRAPPED_INTERNALVAL,
VALUE_OF_TRAPPED_INTERNALVAR, SET_TRAPPED_INTERNALVAR): Use these
to create internal vars for pointer pseudo-regs.
|
|
binary files oring in the right bit.
* main.c, source.c, state.c, symmisc.c: use macros defined in
fopen-{bin|both} when fopening files.
* remote-hms.c, remote-sim.c: lint
|
|
* remote-hms.c: whitespace
* h8300-tdep.c: (h8300_skip_prologue, examine_prologue):
understand new stack layout. (print_register_hook): print ccr
register in a fancy way.
|
