| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
(DEPRECATED_SERIAL_FD): Delete.
(SERIAL_DEBUG): Delete.
(SERIAL_DEBUG_P): Delete.
(SERIAL_DRAIN_OUTPUT): Delete.
(SERIAL_FLUSH_OUTPUT): Delete.
(SERIAL_FLUSH_INPUT): Delete.
(SERIAL_SEND_BREAK): Delete.
(SERIAL_RAW): Delete.
(SERIAL_GET_TTY_STATE): Delete.
(SERIAL_SET_TTY_STATE): Delete.
(SERIAL_PRINT_TTY_STATE): Delete.
(SERIAL_NOFLUSH_SET_TTY_STATE): Delete.
(SERIAL_SETBAUDRATE): Delete.
(SERIAL_SETSTOPBITS): Delete.
(SERIAL_CAN_ASYNC_P): Delete.
(SERIAL_IS_ASYNC_P): Delete.
(SERIAL_UN_FDOPEN): Delete.
(SERIAL_READCHAR): Delete.
(SERIAL_CLOSE): Delete.
(SERIAL_FDOPEN): Delete.
(SERIAL_OPEN): Delete.
|
|
* remote-e7000.c (fetch_regs_from_dump): If register set is null,
generate an internal error.
(e7000_fetch_registers): Initialize variable 'wanted'.
(e7000_wait): Initialize variable 'wanted_nopc'.
(e7000_store_register): Fix sprintf compiler warnings.
(sub2_from_pc): Ditto.
(e7000_open): Close the descriptor, not the name.
(e7000_load): Fix compiler warnings.
(sub2_from_pc): Ditto.
* Makefile.in (remote-e7000.o): Can now compile with -Werror.
|
|
|
|
* utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
* values.c (unpack_double): Remove obsolete check for _MSC_VER.
* defs.h: Ditto.
* m32r-rom.c: Ditto.
* p-exp.y: Ditto.
* ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for faster
compilation.
(get_ds_base): Remove _MSC_VER version of this function.
* nindy-share/ttyflush.c: Ditto. X
* rdi-share/host.h: Ditto. X
* ser-go32.c (dos_readchar): Remove call to obsolete function.
* remote-sim.c (gdb_os_poll_quit): Ditto.
* remote-e7000.c (expect): Remove obsolete #if 0'ed code.
* main.c (captured_main): Eliminate special Cygwin checks.
* ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
|
|
* remote-e7000.c (e7000_open): Check for bad baud rate.
* remote-st.c (st2000_open): Ditto.
|
|
|
|
function.
* corelow.c (core_ops): Updated for above change.
* gnu-nat.c (core_ops): Likewise.
* inftarg.c (child_ops): Likewise.
* monitor.c (monitor_ops): Likewise.
* ppc-bdm.c (bdm_ppc_ops): Likewise.
* remote-adapt.c (adapt_ops): Likewise.
* remote-bug.c (bug_ops): Likewise.
* remote-e7000.c (e7000_ops): Likewise.
* remote-eb.c (eb_ops): Likewise.
* remote-es.c (es1800_ops, es1800_child_ops): Likewise.
* remote-mm.c (mm_ops): Likewise.
* remote-nindy.c (nindy_ops): Likewise.
* remote-nrom.c (nrom_ops): Likewise.
* remote-os9k.c (rombug_ops): Likewise.
* remote-rdp.c (remote_rdp_ops): Likewise.
* remote-sim.c (gdbsim_ops): Likewise.
* remote-st.c (st2000_ops): Likewise.
* v850ice.c (v850ice_ops): Likewise.
* target.c (cleanup_target): Likewise
(update_current_target): Likewise.
(setup_target_debug): Likewise
(debug_to_core_file_to_sym_file): Removed.
* corefile.c (core_file_command) [HPUXHPPA]: Removed code that
sets symbol file from information obtained from the core file.
* corelow.c (core_file_to_sym_file): Removed.
|
|
(gdbtk_test): Use PATH_MAX for home var calculation.
* remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as Win32 in
test.
* ser-tcp.c: Use modern __CYGWIN__ conditional.
* source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
(openp): Ditto.
* symfile.c (symfile_bfd_open): Ditto.
* gdbtk/generic/gdbtk.c: Ditto.
|
|
|
|
|
|
|
|
* remote-array.c: Likewise.
* remote-bug.c: Likewise.
* remote-e7000.c: Likewise.
* remote-mips.c: Likewise.
* remote-os9k.c: Likewise.
* remote-st.c: Likewise.
* remote-udi.c: Likewise.
* remote-vx29k.c: Likewise.
* remote-vx68.c: Likewise.
* remote-vx960.c: Likewise.
* remote-vxmips.c: Likewise.
* remote-vxsparc.c: Likewise.
|
|
* ocd.c: Likewise.
* ppc-bdm.c: Likewise.
* remote-adapt.c: Likewise.
* remote-array.c: Likewise.
* remote-bug.c: Likewise.
* remote-e7000.c: Likewise.
* remote-eb.c: Likewise.
* remote-es.c: Likewise.
* remote-mips.c: Likewise.
* remote-mm.c: Likewise.
* remote-nindy.c: Likewise.
* remote-os9k.c: Likewise.
* remote-rdi.c: Likewise.
* remote-rdp.c: Likewise.
* remote-sds.c: Likewise.
* remote-sim.c: Likewise.
* remote-st.c: Likewise.
* remote-udi.c: Likewise.
* remote-vx.c: Likewise.
* remote-vx29k.c: Likewise.
* remote-vx68.c: Likewise.
* remote-vx960.c: Likewise.
* remote-vxmips.c: Likewise.
* remote-vxsparc.c: Likewise.
* remote.c: Likewise.
* ser-pipe.c: Likewise.
* ser-unix.c: Likewise.
* Makefile.in: Updated dependencies.
-------------------------------------------------------------------
|
|
* infptrace.c (child_xfer_memory): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
* remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
* remote-array.c (array_xfer_memory): Likewise.
* remote-bug.c (bug_xfer_memory): Likewise.
* remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
* remote-eb.c (eb_xfer_inferior_memory): Likewise.
* remote-es.c (es1800_xfer_inferior_memory): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
* remote-mm.c (mm_xfer_inferior_memory): Likewise.
* remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
* remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
* remote-rdi.c (arm_rdi_xfer_memory): Likewise.
* remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
* remote-sds.c (sds_xfer_memory): Likewise.
* remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
* remote-st.c (st2000_xfer_inferior_memory): Likewise.
* remote-udi.c (udi_xfer_inferior_memory): Likewise.
* remote-vx.c (vx_xfer_memory): Likewise.
* remote.c (remote_xfer_memory): Likewise.
* target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
* target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
* target.h (#include "memattr.h"): Added.
(target_ops.to_xfer_memory): Add attrib argument.
* wince.c (_initialize_inftarg): Removed call to set_dcache_state.
* dcache.h (set_dcache_state): Removed declaration.
* dcache.c (set_dcache_state): Removed definition
* dcache.c: Update module comment, as dcache is now enabled and
disabled with memory region attributes instead of by the global
variable "remotecache". Add comment describing the interaction
between dcache and memory region attributes.
(dcache_xfer_memory): Add comment describing benefits of moving
cache writeback to a higher level.
(dcache_struct): Removed cache_has_stuff field. This was used to
record whether the cache had been accessed in order to invalidate
it when it was disabled. However, this is not needed because the
cache is write through and the code that enables, disables, and
deletes memory regions invalidate the cache. Add comment which
suggests that we could be more selective and only invalidate those
cache lines containing data from those memory regions.
(dcache_invalidate): Updated.
(dcache_xfer_memory): Updated.
(dcache_alloc): Don't abort() if dcache_enabled_p is clear.
(dcache_xfer_memory): Removed code that called do_xfer_memory() to
perform a uncached transfer if dcache_enabled_p was clear. This
function is now only called if caching is enabled for the memory
region.
(dcache_info): Always print cache info.
* target.c (do_xfer_memory): Add attrib argument.
(target_xfer_memory, target_xfer_memory_partial): Break transfer
into chunks defined by memory regions, pass region attributes to
do_xfer_memory().
* dcache.c (dcache_read_line, dcache_write_line): Likewise.
* Makefile.in (SFILES): Add memattr.c.
(COMMON_OBS): Add memattr.o.
(dcache.o): Add target.h to dependencies.
* memattr.c: New file.
* memattr.h: Likewise.
|
|
(e7000pc_ops): Add e7000pc_setstopbits.
* remote-e7000.c (e7000_detach, e7000_resume,
e7000_xfer_inferior_memory, e7000_files_info, e7000_files_info,
e7000_insert_breakpoint, e7000_remove_breakpoint, e7000_kill):
Update function signature to match target vector.
* h8300-tdep.c (h8300_command, h8300h_command, h8300s_command):
h8500-tdep.c (small_command, big_command, medium_command,
compact_command): Update function signature to match add_cmd.
|
|
mips-tdep.c, monitor.c, regcache.c, remote-es.c, ser-unix.c,
somread.c, tracepoint.c: Fix spelling errors in comments.
* gdbarch.c: Regenerate.
* gnu-nat.c (S_exception_raise_request): Fix typos and spelling
errors in strings.
* m3-nat.c (intercept_exec_calls, mach_thread_parse_id): Likewise.
* mcore-tdep.c (mcore_analyze_prologue): Likewise.
* mips-tdep.c (mips16_next_pc, _initialize_mips_tdep): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-rdp.c (handle_swi): Likewise.
* remote-vx.c (vx_load_command): Likewise.
* sh-tdep.c (sh_do_pseudo_register): Likewise.
* sol-thread.c (td_err_string): Likewise.
* symtab.c (decode_line_2): Likewise.
-------------------------------------------------------------------
|
|
|
|
lines up under the data vector.
* dcache.c (dcache_read_line): New function.
(dcache_peek_byte): Use it.
(dcache_alloc): Return NULL if write of reclaimed cache line fails.
(dcache_peek_byte, dcache_poke_byte): Return failure if
dcache_alloc() returns a NULL data block pointer.
(dcache_xfer_memory): Don't force writeback unless we were writing.
* monitor.c (monitor_expect): Change places where immediate_quit
is set to 1 or 0 to increments and decrements respectively. This
allows such changes to nest properly.
* ocd.c (ocd_start_remote): Likewise.
* remote-adapt.c (expect): Likewise.
* remote-array.c (expect): Likewise.
* remote-eb.c (expect): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-mips.c (mips_expect_timeout, mips_getstring): Likewise.
* remote-nrom.c (expect): Likewise.
* remote-os9k.c (expect): Likewise.
* remote-sds.c (sds_start_remote): Likewise.
* remote-st.c (expect): Likewise.
* remote-utils.c (sr_expect): Likewise.
* remote.c (remote_start_remote): Likewise.
* tracepoint.c (read_actions): Likewise.
* remote-mips.c (mips_getstring): Balance changes to immediate_quit.
|
|
* sh-tdep.c (sh_push_arguments): Make header match prototype.
* remote-e7000.c (e7000_start_remote): Use void *, not char * as
parameter to avoid compiler warning.
(fetch_regs_from_dump): Call get_hex() with the correct number of
parameters.
|
|
|
|
Multiarch the sh target.
* sh-tdep.c:
(sh_generic_reg_names, sh_reg_names,sh3_reg_names, sh3e_reg_names,
sh_dsp_reg_names, sh3_dsp_reg_names, sh_processor_type_table):
Remove.
(XMALLOC): Define.
(struct frame_extra_info): Define.
(sh_register_raw_size, sh_register_virtual_size,
sh_register_virtual_type, sh_register_byte, sh_breakpoint_from_pc,
sh_frame_saved_pc, sh_skip_prologue,
sh_nofp_frame_init_saved_regs, sh_fp_frame_init_saved_regs,
sh_extract_struct_value_address, sh_use_struct_convention,
sh_store_struct_return, sh_push_arguments, sh_push_return_address,
sh_saved_pc_after_call, sh_generic_register_name,
sh_sh_register_name, sh_sh3_register_name, sh_sh3e_register_name,
sh_sh_dsp_register_name, sh_sh3_dsp_register_name,
sh_frame_args_address, sh_frame_locals_address,
sh_coerce_float_to_double, sh_default_store_return_value,
sh3e_sh4_store_return_value, sh_generic_show_regs,
sh3_show_regs,sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs,
sh_dsp_show_regs, sh_register_byte, sh_register_raw_size,
sh_register_virtual_size, sh_sh3e_register_virtual_type,
sh_default_register_virtual_type, sh_gdbarch_init): New functions.
(sh_target_architecture_hook, sh_frame_find_saved_regs,
sh_show_regs): Delete functions.
(sh_frame_chain, sh_find_callers_reg, sh_init_extra_frame_info,
sh_pop_frame, sh_extract_return_value): Update
* config/sh/tm-sh.h (GDB_MULTI_ARCH): Define to 1.
(struct gdbarch_tdep): Define.
Remove all unnecessary defines.
* remote-e7000.c ({PR,GBR,SR,MACL,VBR,MACH}_REGNUM): Define to -1,
for h8300 case.
(want_sh,want_nopc_sh,want_nopc_sh3): Make nomenclature
consistent.
(e7000_fetch_registers): Remove ifdef GDB_TARGET_IS_SH, use
runtime check instead.
(e7000_wait): Ditto.
* sh3-rom.c (sh3_supply_register): Use gdbarch_tdep to get the SSR
and SPC register numbers.
(sh3_regnames, sh3e_regnames): Don't specify a size.
* config/h8300/tm-h8300.h: Add comment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ChangeLog-gdbtk for details.
|
|
Re-do TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN, TARGET_ARCHITECTURE,
TARGET_ARCHITECTURE_AUTO, TARGET_BYTE_ORDER_SELECTABLE_P,
TARGET_BYTE_ORDER so that they can all be overriden.
Document.
Convert mn10300 and PPC targets.
|
|
architecture''. Update SH target to use new target_architecture_hook.
|
|
Add prototypes for make_final_cleanup (and the other cleanup
routines.
* remote-e7000.c: Fix sync code to timeout if unable to sync.
Change sync code to report status while trying to sync-up
with hardware. Add debugging output and document.
* ser-e7kpc.c: Swap order of len & offset to match implementation.
Add debugging output and document.
* serial.c: Add debugging output.
* top.c: Add call to do_final_cleanups.
Remove conditionals preventing Win32 from getting SIGQUIT.
* utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
chain as a parameter. Extract this generic code from the cleanup
routines into separate funtions (*_my_cleanup). Keep old
functionality by passing "cleanup_chain" to the new funtions.
Define the cleanup chain "final_cleanup_chain" to be a cleanup
chain which will be executed only when gdb exits. Add functions
(*_final_cleanup) to match the original (*_cleanup) functions.
(pollquit, quit, notice_quit): Fix to read cntl-C from the
Windows message queue.
|
|
Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
for a rather huge set of changes. I was going to put them here, but it
made cvs dump core. :-(
|
|
PR 9935
|
|
Add set option "remote_timeout" for setting remote_timeout.
Add set option "use_hard_breakpoints" for setting hardware
.vs. memory breakpoints.
|
|
Add option "tcp_remote" to target command if using
tcp to connect to a remote host which is then connected
via serial port to the e7000 (for exampole, a port master).
(e7000_open): Change to call e7000_parse_device.
|
|
(e7000_xfer_inferior_memory): Call it.
PR 9754
|
|
(generic_load): Call it to report transfer rate.
* remote-e7000.c (e7000_load): Ditto.
PR 9353
|
|
network.
* (e7000_wait): Don't backup PC when we hit a breakpoint.
Apparantly new sh2 pods get this right...
* (e7000_ops): Add call to e7000_load.
|
|
that hardware watchpoint removal problems won't leave breakpoint
traps in the target.
* configure configure.in: Make --enable-gdbtk be the default.
* remote-e7000.c (e7000_insert_breakpoint,
e7000_remove_breakpoint): Use e7000 based breakpoints, not memory
breakpoints.
* (e7000_wait): Adjust PC back by two when we see a breakpoint to
compensate for e7000 maladjustment.
* sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug
which prevented hardware watchpoints from working.
|
|
strings.h, and memory.h.
* configure: Regenerated.
* gdb_stat.h: New file, "portable" <sys/stat.h>.
* gdb_string.h: New file, "portable" <string.h>.
* altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c,
convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c,
gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c,
i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c,
mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c,
rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c,
symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c,
ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h"
instead of <sys/stat.h>.
* alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c,
ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c,
core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c,
dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c,
exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c,
fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c,
inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c,
m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c,
monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c,
printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c,
remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c,
remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c,
remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c,
remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c,
remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c,
solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c,
symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c,
valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include
"gdb_string.h" instead of <string.h>.
* gdbtk.c: Likewise.
* config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h,
sparc/xm-sun4os4.h (HAVE_MMAP): Removed.
* config/xm-lynx.h, config/i386/xm-ptx.h,
config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h,
config/mips/xm-irix3.h, config/mips/xm-mips.h,
config/mips/xm-news-mips.h, config/mips/xm-riscos.h,
config/pa/hppah.h, config/rs6000/xm-rs6000.h,
config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h,
config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed.
* config/mips/xm-irix3.h, config/mips/xm-mips.h,
config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
|
|
* h8500-tdep.c (saved_pc_after_call): The size of the
pc is memory model dependent. (segmented_command,
unsegmented_command, _initialize_h8500_tdep): New commands to
change memory model.
* remote-7000.c (initialize_remote_e7000): Change name of snoop
command.
* remote-hms.c (hms_load): Remove breakpoints when loaded.
(hms_wait): Use new status structure
(hms_open): Push the target here. (hms_before_main_loop): Not
here. (supply_val, hms_fetch_register, hms_store_register): Cope
with H8/500 names too.
* sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
all registers in a compact way.
|
|
* remote-utils.c, remote-utils.h (gr_load_image): New function to
download to target.
* h8300-tdep.c, h8500-tdep.c, remote-z8k.c, sh-tdep.c z8k-tdep.c
(sim_load): delete.
* remote-sim.c (sim_load): Use gr_load_image.
* config/sh/sh.mt: Add remote-e7000
|
|
|
