Age | Commit message (Collapse) | Author | Files | Lines |
|
This helper can be used in the fetch_registers and store_registers
target methods to determine if a register set includes a specific
register.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
Since we are in C++, this typedef is no longer necessary, we can just
refer to the struct name directly.
gdb/ChangeLog:
* regcache.h (struct cached_reg): Remove typedef.
Change-Id: I0168b5a9cf88e9b962521760c7e2d0e6f0b52cdf
|
|
One regcache object is created for each stopped thread and is stored in
the regcache::regcaches linked list. Looking up a regcache for a given
thread is therefore in O(number of threads). Stopping all threads then
becomes O((number of threads) ^ 2). Same goes for resuming a thread
(need to delete the regcache of a given ptid) and resuming all threads.
It becomes noticeable when debugging thousands of threads, which is
typical with GPU targets. This patch replaces the linked list with some
maps to reduce that complexity.
The first design was using an std::unordered_map with (target, ptid,
arch) as the key, because that's how lookups are done (in
get_thread_arch_aspace_regcache). However, the registers_changed_ptid
function, also somewhat on the hot path (it is used when resuming
threads), needs to delete all regcaches associated to a given (target,
ptid) tuple. If the key of the map is (target, ptid, arch), we have to
walk all items of the map, not good.
The second design was therefore using an std::unordered_multimap with
(target, ptid) as the key. One key could be associated to multiple
regcaches, all with different gdbarches. When looking up, we would have
to walk all these regcaches. This would be ok, because there will
usually be actually one matching regcache. In the exceptional
multi-arch thread cases, there will be maybe two. However, in
registers_changed_ptid, we sometimes need to remove all regcaches
matching a given target. We would then have to talk all items of the
map again, not good.
The design as implemented in this patch therefore uses two levels of
map. One std::unordered_map uses the target as the key. The value type
is an std::unordered_multimap that itself uses the ptid as the key. The
values of the multimap are the regcaches themselves. Again, we expect
to have one or very few regcaches per (target, ptid).
So, in summary:
* The lookups (in get_thread_arch_aspace_regcache), become faster when
the number of threads grows, compared to the linked list. With a
small number of threads, it will probably be a bit slower to do map
lookups than to walk a few linked list nodes, but I don't think it
will be noticeable in practice.
* The function registers_changed_ptid deletes all regcaches related to a
given (target, ptid). It must now handle the different cases separately:
- NULL target and minus_one_ptid: we delete all the entries
- NULL target and non-minus_one_ptid: invalid (checked by assert)
- non-NULL target and non-minus_one_ptid: we delete all the entries
associated to that tuple
- a non-NULL target and minus_one_ptid: we delete all the entries
associated to that target
* The function regcache_thread_ptid_changed is called when a thread
changes ptid. It is implemented efficiently using the map, although
that's not very important: it is not called often, mostly when
creating an inferior, on some specific platforms.
This patch is a tiny bit from ROCm GDB [1] we would like to merge
upstream. Laurent Morichetti gave be these performance numbers:
The benchmark used is:
time ./gdb --data-directory=data-directory /extra/lmoriche/hip/samples/0_Intro/bit_extract/bit_extract -ex "set pagination off" -ex "set breakpoint pending on" -ex "b bit_extract_kernel if \$_thread == 5" -ex run -ex c -batch
It measures the time it takes to continue from a conditional breakpoint with
2048 threads at that breakpoint, one of them reporting the breakpoint.
baseline:
real 0m10.227s
real 0m10.177s
real 0m10.362s
with patch:
real 0m8.356s
real 0m8.424s
real 0m8.494s
[1] https://github.com/ROCm-Developer-Tools/ROCgdb
gdb/ChangeLog:
* regcache.c (ptid_regcache_map): New type.
(target_ptid_regcache_map): New type.
(regcaches): Change type to target_ptid_regcache_map.
(get_thread_arch_aspace_regcache): Update to regcaches' new
type.
(regcache_thread_ptid_changed): Likewise.
(registers_changed_ptid): Likewise.
(regcaches_size): Likewise.
(regcaches_test): Update.
(regcache_thread_ptid_changed): Update.
* regcache.h (regcache_up): New type.
* gdbsupport/ptid.h (hash_ptid): New struct.
Change-Id: Iabb0a1111707936ca111ddb13f3b09efa83d3402
|
|
I don't really understand why `regcache_thread_ptid_changed` is a static
method of `struct regcache` instead of being a static free function in
regcache.c. And I don't understand why `current_regcache` is a static
member of `struct regcache` instead of being a static global in
regcache.c. It's not wrong per-se, but there's no other place where we
do it like this in GDB (as far as I remember) and it just exposes things
unnecessarily in the .h.
Move them to be just static in regcache.c. As a result,
registers_changed_ptid doesn't need to be friend of the regcache class
anymore.
Removing the include of forward_list in regcache.h showed that we were
missing an include for it in dwarf2/index-write.c, record-btrace.c and
sparc64-tdep.c.
gdb/ChangeLog:
* regcache.h (class regcache): Remove friend
registers_changed_ptid.
<regcache_thread_ptid_changed>: Remove.
<regcaches>: Remove.
* regcache.c (regcache::regcaches): Rename to...
(regcaches): ... this. Make static.
(get_thread_arch_aspace_regcache): Update.
(regcache::regcache_thread_ptid_changed): Rename to...
(regcache_thread_ptid_changed): ... this. Update.
(class regcache_access): Remove.
(regcaches_test): Update.
(_initialize_regcache): Update.
* sparc64-tdep.c, dwarf2/index-write.c, record-btrace.c: Include
<forward_list>.
Change-Id: Iabc25759848010cfbb7ee7e27f60eaca17d61c12
|
|
The name `current_regcache` for the list of currently-existing regcaches
sounds wrong. The name is singular, but it holds multiple regcaches, so
it could at least be `current_regcaches`.
But in other places in GDB, "current" usually means "the object we are
working with right now". For example, we swap the "current thread" when
we want to operate on a given thread. This is not the case here, this
variable just holds all regcaches that exist at any given time, not "the
regcache we are working with right now".
So, I think calling it `regcaches` is better. I also considered
`regcache_list`, but a subsequent patch will make it a map and not a
list, so it would sound wrong again. `regcaches` sounds right for any
collection of regcache, whatever the type.
Rename a few other things that were related to this `current_regcache`
field. Note that there is a `get_current_regcache` function, which
returns the regcache of the current thread. That one is fine, because
it returns the regcache for the current thread.
gdb/ChangeLog:
* regcache.h (class regcache) <current_regcache>: Rename to...
<regcaches>: ... this. Move doc here.
* regcache.c (regcache::current_regcache) Rename to...
(regcache::regcaches): ... this. Move doc to header.
(get_thread_arch_aspace_regcache): Update.
(regcache::regcache_thread_ptid_changed): Update.
(registers_changed_ptid): Update.
(class regcache_access) <current_regcache_size>: Rename to...
<regcaches_size>: ... this.
(current_regcache_test): Rename to...
(regcaches_test): ... this.
(_initialize_regcache): Update.
Change-Id: I87de67154f5fe17a1f6aee7c4f2036647ee27b99
|
|
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
I touched symtab.h and was surprised to see how many files were
rebuilt. I looked into it a bit, and found that defs.h includes
gdbarch.h, which in turn includes many things.
gdbarch.h is only needed by a minority ofthe files in gdb, so this
patch removes the include from defs.h and updates the fallout.
I did "wc -l" on the files in build/gdb/.deps; this patch reduces the
line count from 139935 to 137030; so there are definitely future
build-time savings here.
Note that while I configured with --enable-targets=all, it's possible
that some *-nat.c file needs an update. I could not test all of
these. The buildbot caught a few problems along these lines.
gdb/ChangeLog
2019-07-10 Tom Tromey <tom@tromey.com>
* defs.h: Don't include gdbarch.h.
* aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h,
alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h,
ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c,
cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h,
cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c,
compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c,
cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c,
dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c,
dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c,
dwarf2expr.c, expression.h, f-lang.c, frame-base.c,
frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h,
go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c,
i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c,
linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c,
mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c,
objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c,
parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c,
record-btrace.c, record.h, regcache-dump.c, regcache.h,
riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y,
sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c,
sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c,
sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h,
target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c,
tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c,
utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c,
xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update.
* s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Currently, signal frame handlers require explicitly coded calls to
trad_frame_set_reg_addr() to describe the location of saved registers
within a signal frame. This change permits the regcache_map_entry
arrays used with regcache::supply_regset and regcache::collect_regset
to be used to describe a block of saved registers given an initial
address for the register block.
Some systems use the same layout for registers in core dump notes,
native register sets with ptrace(), and the register contexts saved in
signal frames. On these systems, a single register map can now be
used to describe the layout of registers in all three places.
If a register map entry's size does not match the native size of a
register, try to match the semantics used by
regcache::transfer_regset. If a register slot is too large, assume
that the register's value is stored in the first N bytes and ignore
the remaning bytes. If the register slot is smaller than the
register, assume the slot holds the low N bytes of the register's
value. Read these low N bytes from the target and zero-extend them to
generate a register value.
While here, document the semantics for both regcache::transfer_regset
and trad_frame with respect to register slot's whose size does not
match the register's size.
gdb/ChangeLog:
* regcache.h (struct regcache_map_entry): Note that this type can
be used with traditional frame caches.
* trad-frame.c (trad_frame_set_reg_regmap): New.
* trad-frame.h (trad_frame_set_reg_regmap): New.
|
|
sve_regmap cannot be global static as the size is dependant on the current
vector length.
gdb/
* aarch64-linux-tdep.c (aarch64_linux_supply_sve_regset): New function.
(aarch64_linux_collect_sve_regset): Likewise.
(aarch64_linux_iterate_over_regset_sections): Check for SVE.
* regcache.h (regcache_map_entry_size): New function.
|
|
This avoids assert failures when the register is bigger than the
slot size. This happens on Aarch64 when truncating Z registers
into an fpsimd structure. This can be triggered by running
gdb command "generate-core-file".
Also, when the register is smaller then the slot size, then
zero pad when writing to the slot, and truncate when writing
to the regcache. This happens on Aarch64 with the CPSR register.
Continue to ensure registers are invalidated when both buffers
are null.
gdb/
* regcache.c (readable_regcache::read_part): Fix asserts.
(reg_buffer::raw_collect_part): New function.
(regcache::write_part): Fix asserts.
(reg_buffer::raw_supply_part): New function.
(regcache::transfer_regset_register): New helper function.
(regcache::transfer_regset): Call new functions.
(regcache_supply_regset): Use gdb_byte*.
(regcache::supply_regset): Likewise.
(regcache_collect_regset): Likewise.
(regcache::collect_regset): Likewise.
* regcache.h (reg_buffer::raw_collect_part): New declaration.
(reg_buffer::raw_supply_part): Likewise.
(regcache::transfer_regset_register): Likewise.
(regcache::transfer_regset): Use gdb_byte*.
|
|
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
|
|
Additionally, tidy up the functions: Remove asserts, use gdb_byte,
update comments.
gdb/
* regcache.c (readable_regcache::read_part): Avoid memcpy when
possible.
(regcache::write_part): Likewise.
(readable_regcache::cooked_read_part): Update comment.
(readable_regcache::cooked_write_part): Likewise.
* regcache.h: (readable_regcache::read_part): Likewise.
(regcache::write_part): Likewise.
|
|
regcache_cooked_read_ftype can be converted to a function_view, which
allows us to use lambda functions and therefore avoid having to pass an
opaque pointer parameter.
Adjusting the fallouts showed that the "const regcache &" passed to the
readonly_detached_regcache constructor is cast to non-const in
do_cooked_read. I changed the constructor parameter to be non-const.
Finally, I renamed the typedef from regcache_cooked_read_ftype to
register_read_ftype, since there is nothing that forces us to use it
only for regcaches nor cooked registers.
gdb/ChangeLog:
* regcache.h (regcache_cooked_read_ftype): Rename to...
(register_read_ftype): ...this, change type to function_view.
(class reg_buffer) <save>: Remove src parameter.
(readonly_detached_regcache) <readonly_detached_regcache>: Make
parameter non-const in first overload. Remove src parameter in
second overload.
* regcache.c (do_cooked_read): Remove.
(readonly_detached_regcache::readonly_detached_regcache): Make
parameter non-const, adjust call to other constructor.
(reg_buffer::save): Remove src parameter.
* frame.c (do_frame_register_read): Remove.
(frame_save_as_regcache): Use lambda function.
* ppc-linux-tdep.c (ppu2spu_unwind_register): Change type of src
parameter to ppu2spu_data *.
(ppu2spu_sniffer): Use lambda function.
|
|
gdb/
* common/common-regcache.h (raw_compare): New function.
* regcache.c (regcache::raw_compare): Likewise.
* regcache.h (regcache::raw_compare): New declaration.
gdbserver/
* regcache.c (regcache::raw_compare): New function.
* regcache.h (regcache::raw_compare): New declaration.
|
|
A purely virtual class containing functions from gdb/regcache.h
Both the gdb regcache structures and gdbserver regcache inherit
directly from reg_buffer_common. This will allow for common
functions which require the use of a regcache.
gdb/
* common/common-regcache.h (reg_buffer_common): New structure.
* regcache.c (reg_buffer::invalidate): Move from detached_regcache.
(reg_buffer::raw_supply): Likewise.
(reg_buffer::raw_supply_integer): Likewise.
(reg_buffer::raw_supply_zeroed): Likewise.
(reg_buffer::raw_collect): Likewise.
(reg_buffer::raw_collect_integer): Likewise.
* regcache.h (reg_buffer::invalidate): Move from detached_regcache.
(reg_buffer::raw_supply): Likewise.
(reg_buffer::raw_supply_integer): Likewise.
(reg_buffer::raw_supply_zeroed): Likewise.
(reg_buffer::raw_collect): Likewise.
(reg_buffer::raw_collect_integer): Likewise.
gdbserver/
* regcache.c (new_register_cache): Use new.
(free_register_cache): Use delete.
(register_data): Use const.
(supply_register): Move body inside regcache.
(regcache::raw_supply): New override function.
(collect_register): Move body inside regcache.
(regcache::raw_collect): New override function.
(regcache::get_register_status): New override function.
* regcache.h (struct regcache): Inherit from reg_buffer_common.
|
|
Using std::unique_ptr allows to remove the manual xfree in the
destructor.
If I understand correctly, using the () after the new operator will make
sure the allocated objects will be value initialized, which for scalars
means they are zero-initialized. So it should have the same behavior as
XCNEWVEC.
gdb/ChangeLog:
* regcache.h (reg_buffer) <~reg_buffer>: Use default destructor.
<m_registers, m_register_status>: Change type to
std::unique_ptr.
* regcache.c (reg_buffer::reg_buffer): Use new instead of
XCNEWVEC.
|
|
The type of reg_buffer::m_register_status is an array of signed char,
probably to ensure that each element takes up only one byte. Instead,
since we use C++11, we can force the underlying type of register_status
to be signed char and use the enum type.
gdb/ChangeLog:
* common/common-regcache.h (enum register_status): Add
underlying type "signed char".
* regcache.h (reg_buffer) <m_register_status>: Change type to
register_status *.
* regcache.c (reg_buffer::reg_buffer): Alocate arrays of
register_status instead of signed char.
(reg_buffer::save): Use REG_UNKNOWN instead of 0.
(reg_buffer::get_register_status): Remove cast.
(readable_regcache::raw_read): Remove cast.
(readable_regcache::cooked_read): Remove cast.
|
|
Remove regcache_raw_collect, update callers to use
regcache::raw_collect.
gdb/ChangeLog:
* regcache.h (regcache_raw_collect): Remove, update callers to
use regcache::raw_collect.
* regcache.c (regcache_raw_collect): Remove.
|
|
Remove regcache_raw_supply, update callers to use
detached_regcache::raw_supply.
gdb/ChangeLog:
* regcache.h (regcache_raw_supply): Remove, update callers to
use detached_regcache::raw_supply.
* regcache.c (regcache_raw_supply): Remove.
|
|
Remove regcache_cooked_write_part, update callers to use
regcache::cooked_write_part.
gdb/ChangeLog:
* regcache.h (regcache_cooked_write_part): Remove, update
callers to use regcache::cooked_write_part.
* regcache.c (regcache_cooked_write_part): Remove.
|
|
Remove regcache_cooked_read_part, update callers to use
readable_regcache::cooked_read_part.
gdb/ChangeLog:
* regcache.h (regcache_cooked_read_part): Remove, update callers
to use readable_regcache::cooked_read_part.
* regcache.c (regcache_cooked_read_part): Remove.
|
|
Remove regcache_cooked_read_value, update callers to use
readable_regcache::cooked_read_value.
gdb/ChangeLog:
* regcache.h (regcache_cooked_read_value): Remove, update
callers to use readable_regcache::cooked_read_value.
* regcache.c (regcache_cooked_read_value): Remove.
|
|
Remove regcache_cooked_write, update callers to use
regcache::cooked_write.
gdb/ChangeLog:
* regcache.h (regcache_cooked_write): Remove, update callers to
use regcache::cooked_write.
* regcache.c (regcache_cooked_write): Remove.
|
|
Remove regcache_invalidate, update callers to use
detached_regcache::invalidate instead.
gdb/ChangeLog:
* regcache.h (regcache_invalidate): Remove, update callers to
use detached_regcache::invalidate instead.
* regcache.c (regcache_invalidate): Remove.
|
|
Remove regcache_raw_write_part, update callers to use
regcache::raw_write_part instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_write_part): Remove, update callers
to use regcache::raw_write_part instead.
* regcache.c (regcache_raw_write_part): Remove.
|
|
Remove regcache_raw_read_part, update callers to use
readable_regcache::raw_read_part instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_read_part): Remove, update callers to
use readable_regcache::raw_read_part instead.
* regcache.c (regcache_raw_read_part): Remove.
|
|
Remove regcache_cooked_read, update callers to use
readable_regcache::cooked_read instead.
gdb/ChangeLog:
* regcache.h (regcache_cooked_read): Remove, update callers to
use readable_regcache::cooked_read instead.
* regcache.c (regcache_cooked_read): Remove.
|
|
Remove regcache_raw_write, update all callers to use regcache::raw_write
instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_write): Remove, update callers to use
regcache::raw_write instead.
* regcache.c (regcache_raw_write): Remove.
|
|
Remove regcache_raw_read, update all callers to use
readable_regcache::raw_read instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_read): Remove, update callers to use
readable_regcache::raw_read instead.
* regcache.c (regcache_raw_read): Remove.
|
|
Remove regcache_raw_update, update callers to use
readable_regcache::raw_update instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_update): Remove, update callers to
use readable_regcache::raw_update instead.
* regcache.c (regcache_raw_update): Remove.
|
|
Remove regcache_register_status, change callers to use
reg_buffer::get_register_status directly.
gdb/ChangeLog:
* regcache.h (regcache_register_status): Remove, update callers
to use reg_buffer::get_register_status directly instead.
* regcache.c (regcache_register_status): Remove.
|
|
Remove regcache_get_ptid, change all callers to call the regcache method
directly.
gdb/ChangeLog:
* regcache.h (regcache_get_ptid): Remove, update all callers to
call regcache::ptid instead.
* regcache.c (regcache_get_ptid): Remove.
|
|
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* Makefile.in (COMMON_SFILES): Add regcache-dump.c
* regcache-dump.c: New file.
* regcache.c: Move register_dump to regcache-dump.c.
(maintenance_print_registers): Likewise.
(maintenance_print_raw_registers): Likewise.
(maintenance_print_cooked_registers): Likewise.
(maintenance_print_register_groups): Likewise.
(maintenance_print_remote_registers): Likewise.
(_initialize_regcache): Likewise.
* regcache.h (register_dump): Moved from regcache.c.
|
|
Now, m_readonly_p is always false, so we can remove it, and regcache no
longer includes pseudo registers. Some regcache methods are lift up to
its parent class, like reg_buffer or detached_regcache.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::regcache): Update.
(regcache::invalidate): Move it to detached_regcache::invalidate.
(get_thread_arch_aspace_regcache): Update.
(regcache::raw_update): Update.
(regcache::cooked_read): Remove some code.
(regcache::cooked_read_value): Likewise.
(regcache::raw_write): Remove assert on m_readonly_p.
(regcache::raw_supply_integer): Move it to
detached_regcache::raw_supply_integer.
(regcache::raw_supply_zeroed): Likewise.
* regcache.h (detached_regcache) <raw_supply_integer>: New
declaration.
<raw_supply_zeroed, invalidate>: Likewise.
(regcache) <raw_supply_integer, raw_supply_zeroed>: Removed.
<invalidate>: Likewise.
<m_readonly_p>: Removed.
|
|
Nowadays, we create a readonly regcache in get_return_value, and pass it
to gdbarch_return_value to get the return value. In theory, we can pass a
readable_regcache instance and get the return value, because we don't need
to modify the regcache. Unfortunately, gdbarch_return_value is designed
to multiplex regcache, according to READBUF and WRITEBUF.
# If READBUF is not NULL, extract the return value and save it in this
# buffer.
#
# If WRITEBUF is not NULL, it contains a return value which will be
# stored into the appropriate register.
In fact, gdbarch_return_value should be split to three functions, 1) only
return return_value_convention, 2) pass regcache_readonly and readbuf, 3)
pass regcache and writebuf. These changes are out of the scope of this
patch series, so I pass regcache to gdbarch_return_value even for read,
and trust each gdbarch backend doesn't modify regcache.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* infcmd.c (get_return_value): Let stop_regs point to
get_current_regcache.
* regcache.c (regcache::regcache): Remove.
(register_dump_reg_buffer): New class.
(regcache_print): Adjust.
* regcache.h (regcache): Remove constructors.
|
|
Nowadays, we need to dump registers contents from "readwrite" regcache and
"readonly" regcache,
if (target_has_registers)
get_current_regcache ()->dump (out, what_to_dump);
else
{
/* For the benefit of "maint print registers" & co when
debugging an executable, allow dumping a regcache even when
there is no thread selected / no registers. */
regcache dummy_regs (target_gdbarch ());
dummy_regs.dump (out, what_to_dump);
}
since we'll have two different types/classes for "readwrite" regcache and
"readonly" regcache, we have to move dump method to their parent class,
reg_buffer. However, the functionality of "dump" looks unnecessary to
reg_buffer (because some dump modes like regcache_dump_none,
regcache_dump_remote and regcache_dump_groups don't need reg_buffer at
all, they need gdbarch to do the dump), so I decide to move "dump" into a
separate classes, and each sub-class is about each mode of dump.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* regcache.c (class register_dump): New class.
(register_dump_regcache, register_dump_none): New class.
(register_dump_remote, register_dump_groups): New class.
(regcache_print): Update.
* regcache.h (regcache_dump_what): Move it to regcache.c.
(regcache) <dump>: Remove.
|
|
jit.c uses the regcache in a slightly different way, the regcache dosen't
write through to target, but it has read and write methods. If I apply
regcache in record-full.c, it has the similar use pattern. This patch
adds a new class detached_regcache, a register buffer, but can be
read and written.
Since jit.c doesn't want to write registers through to target, it uses
regcache as a readonly regcache (because only readonly regcache
disconnects from the target), but it adds a hole in regcache
(raw_set_cached_value) in order to modify a readonly regcache. This patch
fixes this hole completely.
regcache inherits detached_regcache, and detached_regcache inherits
readable_regcache. The ideal design is that both detached_regcache and
readable_regcache inherit reg_buffer, and regcache inherit
detached_regcache and regcache_read (virtual inheritance). I concern
about the performance overhead of virtual inheritance, so I don't do it in
the patch.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* jit.c (struct jit_unwind_private) <regcache>: Change its type to
reg_buffer_rw *.
(jit_unwind_reg_set_impl): Call raw_supply.
(jit_frame_sniffer): Use reg_buffer_rw.
* record-full.c (record_full_core_regbuf): Change its type.
(record_full_core_open_1): Use reg_buffer_rw.
(record_full_close): Likewise.
(record_full_core_fetch_registers): Use regcache->raw_supply.
(record_full_core_store_registers): Likewise.
* regcache.c (regcache::get_register_status): Move it to
reg_buffer.
(regcache_raw_set_cached_value): Remove.
(regcache::raw_set_cached_value): Remove.
(regcache::raw_write): Call raw_supply.
(regcache::raw_supply): Move it to reg_buffer_rw.
* regcache.h (regcache_raw_set_cached_value): Remove.
(reg_buffer_rw): New class.
|
|
This patch adds a new class (type) for readonly regcache, which is
created via regcache::save. readonly_detached_regcache inherits
readable_regcache.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* dummy-frame.c (dummy_frame_cache) <prev_regcache>: Use
readonly_detached_regcache.
(dummy_frame_prev_register): Use regcache->cooked_read.
* frame.c (frame_save_as_regcache): Change return type.
(frame_pop): Update.
* frame.h (frame_save_as_regcache): Update declaration.
* inferior.h (get_infcall_suspend_state_regcache): Update
declaration.
* infrun.c (infcall_suspend_state) <registers>: use
readonly_detached_regcache.
(save_infcall_suspend_state): Don't use regcache_dup.
(get_infcall_suspend_state_regcache): Change return type.
* linux-fork.c (struct fork_info) <savedregs>: Change to
readonly_detached_regcache.
<pc>: New field.
(fork_save_infrun_state): Don't use regcache_dup.
(info_checkpoints_command): Adjust.
* mi/mi-main.c (register_changed_p): Update declaration.
(mi_cmd_data_list_changed_registers): Use
readonly_detached_regcache.
(register_changed_p): Change parameter type to
readonly_detached_regcache.
* ppc-linux-tdep.c (ppu2spu_cache) <regcache>: Use
readonly_detached_regcache.
(ppu2spu_sniffer): Construct a new readonly_detached_regcache.
* regcache.c (readonly_detached_regcache::readonly_detached_regcache):
New.
(regcache::save): Move it to reg_buffer.
(regcache::restore): Change parameter type.
(regcache_dup): Remove.
* regcache.h (reg_buffer) <save>: New method.
(readonly_detached_regcache): New class.
* spu-tdep.c (spu2ppu_cache) <regcache>: Use
readonly_detached_regcache.
(spu2ppu_sniffer): Construct a new readonly_detached_regcache.
|
|
... instead we start to use regcache methods save and restore. It is
quite straightforward to replace regcache_save with regcache->save.
regcache_cpy has some asserts, some of them not necessary, like
gdb_assert (src != dst);
because we already assert !m_readonly_p and src->m_readonly_p, so
src isn't dst. Some of the asserts are moved to ::restore.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* frame.c (frame_save_as_regcache): Use regcache method save.
(frame_pop): Use regcache method restore.
* infrun.c (restore_infcall_suspend_state): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): User regcache method
save.
* regcache.c (regcache_save): Remove.
(regcache::restore): More asserts.
(regcache_cpy): Remove.
* regcache.h (regcache_save): Remove the declaration.
(regcache::restore): Move from private to public.
Remove the friend declaration of regcache_cpy.
(regcache_cpy): Remove declaration.
|
|
pseudo_register_read and pseudo_register_read_value
pseudo registers are either from raw registers or memory, so
gdbarch methods pseudo_register_read and pseudo_register_read_value
should have regcache object which only have read methods. In other
words, we should disallow writing to regcache in these two gdbarch
methods. In order to apply this restriction, this patch adds a new
class readable_regcache, derived from reg_buffer, and it only has
raw_read and cooked_read methods. regcache is derived from
readable_regcache. This patch also passes readable_regcache instead of
regcache to gdbarch methods pseudo_register_read and
pseudo_register_read_value.
This patch moves raw_read* and cooked_read* methods to readable_regcache,
which is straightforward. One thing not straightforward is that I split
regcache::xfer_part to readable_regcache::read_part and regcache::write_part,
because readable_regcache can only have methods to read.
readable_regcache is an abstract base class, and it has a pure virtual
function raw_update, because I don't want readable_regcache know where
these raw registers are from. They can be from either the target
(readwrite regcache) or the regcache itself (readonly regcache).
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_register_read_value): Change
parameter type to 'readable_regcache *'.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
(arm_pseudo_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* gdbarch.c: Re-generated.
* gdbarch.h: Re-generated.
* gdbarch.sh (pseudo_register_read): Change parameter type to
'readable_regcache *'.
(pseudo_register_read_value): Likewise.
* h8300-tdep.c (pseudo_from_raw_register): Likewise.
(h8300_pseudo_register_read): Likewise.
* hppa-tdep.c (hppa_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
(i386_pseudo_register_read_value): Likewise.
* i386-tdep.h (i386_pseudo_register_read_into_value): Update
declaration.
* ia64-tdep.c (ia64_pseudo_register_read): Likewise.
* m32c-tdep.c (m32c_raw_read): Likewise.
(m32c_read_flg): Likewise.
(m32c_banked_register): Likewise.
(m32c_banked_read): Likewise.
(m32c_sb_read): Likewise.
(m32c_part_read): Likewise.
(m32c_cat_read): Likewise.
(m32c_r3r2r1r0_read): Likewise.
(m32c_pseudo_register_read): Likewise.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_register_read): Likewise.
* mips-tdep.c (mips_pseudo_register_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* regcache.c (regcache::raw_read): Move it to readable_regcache.
(regcache::cooked_read): Likewise.
(regcache::cooked_read_value): Likewise.
(regcache_cooked_read_signed):
(regcache::cooked_read): Likewise.
* regcache.h (readable_regcache): New class.
(regcache): Inherit readable_regcache. Move some methods to
readable_regcache.
* rl78-tdep.c (rl78_pseudo_register_read): Change
parameter type to 'readable_regcache *'.
* rs6000-tdep.c (do_regcache_raw_read): Remove.
(e500_pseudo_register_read): Change parameter type to
'readable_regcache *'.
(dfp_pseudo_register_read): Likewise.
(vsx_pseudo_register_read): Likewise.
(efpr_pseudo_register_read): Likewise.
* s390-tdep.c (s390_pseudo_register_read): Likewise.
* sh-tdep.c (sh_pseudo_register_read): Likewise.
* sh64-tdep.c (pseudo_register_read_portions): Likewise.
(sh64_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
(spu_pseudo_register_read): Likewise.
* xtensa-tdep.c (xtensa_register_read_masked): Likewise.
(xtensa_pseudo_register_read): Likewise.
|
|
This patch adds a new class reg_buffer, and regcache inherits it. Class
reg_buffer is a very simple class, which has the buffer for register
contents and status only. It doesn't have any methods to set contents and
status, and it is expected that its children classes can inherit it and
add different access methods.
Another reason I keep class reg_buffer so simple is that I think
reg_buffer can be even reused in other classes which need to record the
registers contents and status, like frame cache for example.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::regcache): Call reg_buffer ctor.
(regcache::arch): Move it to reg_buffer::arch.
(regcache::register_buffer): Likewise.
(regcache::assert_regnum): Likewise.
(regcache::num_raw_registers): Likewise.
* regcache.h (reg_buffer): New class.
(regcache): Inherit reg_buffer.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
The address space is useless to readonly regcache, so this patch removes
the parameter to construct readonly regcache.
address_space was added in regcache by 6c95b8d, but for read-write
regcache. regcache::aspace is used for various breakpoint/watchpoint
checking, and these regcache are not read-only regcache.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* frame.c (do_frame_register_read): Remove aspace.
* jit.c (jit_frame_sniffer): Likwise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Likewise.
* regcache.c (regcache::regcache): Pass nullptr.
(regcache_print): Caller updated.
* regcache.h (regcache::regcache): Remove one constructor
parameter aspace.
|
|
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* regcache.h (regcache) <m_readonly_p>: Change it to const bool.
|
|
regcache::m_aspace is a const, never changed during the lifetime of
regcache object. The address_space object is a const object too.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (insert_single_step_breakpoints): Update.
* frame.c (struct frame_info) <aspace>: Add const.
(frame_save_as_regcache): Add const.
(get_frame_address_space): Return const address_space *.
* frame.h (get_frame_address_space): Update declaration.
* infrun.c (struct step_over_info) <aspace>: Add const.
(set_step_over_info): Make aspace const.
(displaced_step_prepare_throw): Change variable const.
(resume): Likewise.
(proceed): Likewise.
(adjust_pc_after_break): Likewise.
(save_waitstatus): Likewise.
(handle_signal_stop): Likewise.
(keep_going_pass_signal): Likewise.
* jit.c (jit_frame_sniffer): Add const.
* mips-tdep.c (mips_single_step_through_delay): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Likewise.
* record-full.c (record_full_wait_1): Likewise.
* regcache.c (regcache::regcache): Change parameter to const.
* regcache.h (regcache::regcache): Likewise.
(regcache::aspace): Return const address_space *.
(regcache) <m_aspace>: Add const.
|