| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This patch fixes C++ build errors like this:
/home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive]
| COREFILTER_HUGETLB_PRIVATE);
^
This is a case of enums used as bit flags. Unlike "regular" enums,
these values are supposed to be or'ed together. However, in C++, the
type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to
an enum variable without a cast. That means that this:
enum foo_flags flags = 0;
if (...)
flags |= FOO_FLAG1;
if (...)
flags |= FOO_FLAG2;
... would have to be written as:
enum foo_flags flags = (enum foo_flags) 0;
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG1);
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG2);
which is ... ugly. Alternatively, we'd have to use an int for the
variable's type, which isn't ideal either.
This patch instead adds an "enum flags" class. "enum flags" are
exactly the enums where the values are bits that are meant to be ORed
together.
This allows writing code like the below, while with raw enums this
would fail to compile without casts to enum type at the assignments to
'f':
enum some_flag
{
flag_val1 = 1 << 1,
flag_val2 = 1 << 2,
flag_val3 = 1 << 3,
flag_val4 = 1 << 4,
};
DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags)
some_flags f = flag_val1 | flag_val2;
f |= flag_val3;
It's also possible to assign literal zero to an enum flags variable
(meaning, no flags), dispensing either adding an awkward explicit "no
value" value to the enumeration or the cast to assignments from 0.
For example:
some_flags f = 0;
f |= flag_val3 | flag_val4;
Note that literal integers other than zero do fail to compile:
some_flags f = 1; // error
C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that
case.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* btrace.h: Include common/enum-flags.h.
(btrace_insn_flags): Define.
(struct btrace_insn) <flags>: Change type.
(btrace_function_flags): Define.
(struct btrace_function) <flags>: Change type.
(btrace_thread_flags): Define.
(struct btrace_thread_info) <flags>: Change type.
* c-exp.y (token_flags): Rename to ...
(token_flag): ... this.
(token_flags): Define.
(struct token) <flags>: Change type.
* common/enum-flags.h: New file.
* compile/compile-c-types.c (convert_qualified): Change type of
'quals' local.
* compile/compile-internal.h: Include "common/enum-flags.h".
(gcc_qualifiers_flags): Define.
* completer.c (enum reg_completer_targets): Rename to ...
(enum reg_completer_target): ... this.
(reg_completer_targets): Define.
(reg_or_group_completer_1): Change type of 'targets' parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Change type
of 'psl_flags' local.
(do_mixed_source_and_assembly): Change type of 'psl_flags' local.
* infrun.c: Include "common/enum-flags.h".
(enum step_over_what): Rename to ...
(enum step_over_what_flag): ... this.
(step_over_what): Change type.
(start_step_over): Change type of 'step_what' local.
(thread_still_needs_step_over): Now returns a step_over_what.
Adjust.
(keep_going_pass_signal): Change type of 'step_what' local.
* linux-tdep.c: Include "common/enum-flags.h".
(enum filterflags): Rename to ...
(enum filter_flag): ... this.
(filter_flags): Define.
(dump_mapping_p): Change type of 'filterflags' parameter.
(linux_find_memory_regions_full): Change type of 'filterflags'
local.
(linux_find_memory_regions_full): Pass the address of an unsigned
int to sscanf instead of the address of an enum.
* record-btrace.c (btrace_print_lines): Change type of local
'psl_flags'.
(btrace_call_history): Replace 'flags' parameter
with 'int_flags' parameter. Adjust.
(record_btrace_call_history, record_btrace_call_history_range)
(record_btrace_call_history_from): Rename 'flags' parameter to
'int_flags'. Use record_print_flags.
* record.h: Include "common/enum-flags.h".
(record_print_flags): Define.
* source.c: Include "common/enum-flags.h".
(print_source_lines_base, print_source_lines): Change type of
flags parameter.
* symtab.h: Include "common/enum-flags.h".
(enum print_source_lines_flags): Rename to ...
(enum print_source_lines_flag): ... this.
(print_source_lines_flags): Define.
(print_source_lines): Change prototype.
|
|
This adjusts the record targets to tell the core whether a trap was
caused by a breakpoint. Targets that can do this should report
breakpoint traps with the PC already adjusted, so this removes the
re-incrementing record-full was doing.
These targets need to be adjusted before process_stratum targets
beneath are, otherwise target_supports_stopped_by_sw_breakpoint,
etc. would fall through to the target beneath while
recording/replaying, and the core would get confused.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* btrace.h: Include target/waitstatus.h.
(struct btrace_thread_info) <stop_reason>: New field.
* record-btrace.c (record_btrace_step_thread): Use
record_check_stopped_by_breakpoint instead of breakpoint_here_p.
(record_btrace_decr_pc_after_break): Delete.
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint): New functions.
(init_record_btrace_ops): Install them.
* record-full.c (record_full_hw_watchpoint): Delete and replace
with ...
(record_full_stop_reason): ... this throughout.
(record_full_exec_insn): Adjust.
(record_full_wait_1): Adjust. No longer re-increment the PC.
(record_full_wait_1): Adjust. Use
record_check_stopped_by_breakpoint instead of breakpoint_here_p.
(record_full_stopped_by_watchpoint): Adjust.
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): New functions.
(init_record_full_ops, init_record_full_core_ops): Install them.
* record.c (record_check_stopped_by_breakpoint): New function.
* record.h: Include target/waitstatus.h.
(record_check_stopped_by_breakpoint): New declaration.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This makes arguments to to_get_bookmark and to_goto_bookmark const and
fixes the fallout. Tested by rebuilding. The only thing of note is
the new split between cmd_record_goto and record_goto -- basically
separating the CLI function from a new internal API, to allow const
propagation.
2014-06-26 Tom Tromey <tromey@redhat.com>
* record-full.c (record_full_get_bookmark): Make "args" const.
(record_full_goto_bookmark): Make "raw_bookmark" const.
* record.c (record_goto): New function.
(cmd_record_goto): Use it. Now static.
* record.h (record_goto): Declare.
(cmd_record_goto): Remove declaration.
* target-delegates.c: Rebuild.
* target.h (struct target_ops) <to_get_bookmark,
to_goto_bookmark>: Make parameter const.
|
|
This constifies an parameter of to_disconnect and updates
target_disconnect as well.
2014-06-16 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_disconnect>: Make parameter
const.
(target_disconnect): Update.
* target.c (target_disconnect): Make "args" const.
* target-delegates.c: Rebuild.
* remote.c (remote_disconnect): Update.
* record.h (record_disconnect): Update.
* record.c (record_disconnect): Update.
* inf-child.c (inf_child_disconnect): Update.
|
|
Extend the always failing unwinder to provide the PC based on the call
structure detected in the branch trace.
The unwinder supports normal frames and tailcall frames.
Inline frames are not supported.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (record_btrace_frame_unwind)
(record_btrace_tailcall_frame_unwind): New declarations.
* dwarf2-frame: Include record.h
(dwarf2_frame_cfa): Throw an error for btrace frames.
* record-btrace.c: Include hashtab.h.
(btrace_get_bfun_name): New.
(btrace_call_history): Call btrace_get_bfun_name.
(struct btrace_frame_cache): New.
(bfcache): New.
(bfcache_hash, bfcache_eq, bfcache_new): New.
(btrace_get_frame_function): New.
(record_btrace_frame_unwind_stop_reason): Allow unwinding.
(record_btrace_frame_this_id): Compute own id.
(record_btrace_frame_prev_register): Provide PC, throw_error
for all other registers.
(record_btrace_frame_sniffer): Detect btrace frames.
(record_btrace_tailcall_frame_sniffer): New.
(record_btrace_frame_dealloc_cache): New.
(record_btrace_frame_unwind): Add new functions.
(record_btrace_tailcall_frame_unwind): New.
(_initialize_record_btrace): Allocate cache.
* btrace.c (btrace_clear): Call reinit_frame_cache.
* NEWS: Announce it.
testsuite/
* gdb.btrace/record_goto.exp: Add backtrace test.
* gdb.btrace/tailcall.exp: Add backtrace test.
|
|
Add a new modifier /c to the "record function-call-history" command to
indent the function name based on its depth in the call stack.
Also reorder the optional fields to have the indentation at the very beginning.
Prefix the insn range (/i modifier) with "inst ".
Prefix the source line (/l modifier) with "at ".
Change the range syntax from "begin-end" to "begin,end" to allow copy&paste to
the "record instruction-history" and "list" commands.
Adjust the respective tests and add new tests for the /c modifier.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record.h (enum record_print_flag)
<record_print_indent_calls>: New.
* record.c (get_call_history_modifiers): Recognize /c modifier.
(_initialize_record): Document /c modifier.
* record-btrace.c (btrace_call_history): Add btinfo parameter.
Reorder fields. Optionally indent the function name. Update
all users.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Fix expected field
order for "record function-call-history".
Add new tests for "record function-call-history /c".
* gdb.btrace/exception.cc: New.
* gdb.btrace/exception.exp: New.
* gdb.btrace/tailcall.exp: New.
* gdb.btrace/x86-tailcall.S: New.
* gdb.btrace/x86-tailcall.c: New.
* gdb.btrace/unknown_functions.c: New.
* gdb.btrace/unknown_functions.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
doc/
* gdb.texinfo (Process Record and Replay): Document new /c
modifier accepted by "record function-call-history".
Add /i modifier to "record function-call-history" example.
|
|
RECORD_IS_USED and record_full_open look at current_target.to_stratum
to determine whether a record target is in use. This is wrong because
arch_stratum is greater than record_stratum, so if an arch_stratum
target is pushed, RECORD_IS_USED and record_full_open will miss it.
To fix this, we can use the existing find_record_target instead, which
looks up for a record stratum target across the target stack. Since
that means exporting find_record_target in record.h, RECORD_IS_USED
ends up redundant, so the patch eliminates it.
That exercise then reveals other issues:
- adjust_pc_after_break is gating record_full_... calls based on
RECORD_IS_USED. But, record_full_ calls shouldn't be made when
recording with the record-btrace target. So this adds a new
record_full_is_used predicate to be used in that spot.
- record_full_open says "Process record target already running", even
if the recording target is record-btrace ("process record" is the
original complete name of the record-full target). record_btrace_open
only says "The process is already being recorded." and does not
suggest "record stop", like record-full does. The patch factors out
and merges that error to a new record_preopen function that all record
targets call in their open routine.
Tested on x86_64 Fedora 17.
gdb/
2014-01-14 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* infrun.c (use_displaced_stepping): Use find_record_target
instead of RECORD_IS_USED.
(adjust_pc_after_break): Use record_full_is_used instead of
RECORD_IS_USED.
* record-btrace.c (record_btrace_open): Call record_preopen
instead of checking RECORD_IS_USED.
* record-full.c (record_full_shortname)
(record_full_core_shortname): New globals.
(record_full_is_used): New function.
(find_full_open): Call record_preopen instead of checking
RECORD_IS_USED.
(init_record_full_ops): Set the target's shortname to
record_full_shortname.
(init_record_full_core_ops): Set the target's shortname to
record_full_core_shortname.
* record-full.h (record_full_is_used): Declare.
* record.c (find_record_target): Make extern.
(record_preopen): New function.
* record.h (RECORD_IS_USED): Delete macro.
(find_record_target, record_preopen): Declare functions.
|
|
|
|
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
|
|
* record.h (record_print_flag) <record_print_src_line,
record_print_insn_range>: Rename into ...
(record_print_flag) <record_print_src_line,
record_print_insn_range>: ... this. Update all users.
|
|
This command provides a quick high-level overview over the recorded execution
log at function granularity without having to reverse-step.
gdb/
* target.c (target_call_history, target_call_history_from,
target_call_history_range): New.
* target.h (target_ops) <to_call_history, to_call_history_from,
to_call_history_range>: New fields.
(target_call_history, target_call_history_from,
target_call_history_range): New declaration.
* record.c (get_call_history_modifiers, cmd_record_call_history,
record_call_history_size): New.
(_initialize_record): Add the "record function-call-history" command.
Add "set/show record function-call-history-size" commands.
* record.h (record_print_flag): New.
|
|
between different record targets.
gdb/
* record.h (record_disconnect): New.
(record_detach): New.
(record_mourn_inferior): New.
(record_kill): New.
* record-full.c (record_disconnect, record_detach,
record_mourn_inferior, record_kill): Move to...
* record.c: ...here.
(DEBUG): New.
(record_stop): New.
(record_unpush): New.
(cmd_record_stop): Call record_stop. Replace unpush_target
call with record_unpush call.
(record_disconnect, record_detach): Assert that the target
is of record stratum. Call record_unpush, record_stop, and
DEBUG.
(record_mourn_inferior, record_kill): Assert that the target
is of record stratum. Call record_unpush and DEBUG.
|
|
Split record.c into record.c and record-full.c.
The split leaves the command part in record.c and moves the target part into
record-full.c.
gdb/
* record.h: Split into this and ...
* record-full.h: ... this.
* record.c: Split into this and ...
* record-full.c: ... this.
* target.h (target_ops): Add new fields to_info_record,
to_save_record, to_delete_record, to_record_is_replaying,
to_goto_record_begin, to_goto_record_end, to_goto_record.
(target_info_record): New.
(target_save_record): New.
(target_supports_delete_record): New.
(target_delete_record): New.
(target_record_is_replaying): New.
(target_goto_record_begin): New.
(target_goto_record_end): New.
(target_goto_record): New.
* target.c (target_info_record): New.
(target_save_record): New.
(target_supports_delete_record): New.
(target_delete_record): New.
(target_record_is_replaying): New.
(target_goto_record_begin): New.
(target_goto_record_end): New.
(target_goto_record): New.
* record.h: Declare struct cmd_list_element.
(record_cmdlist): New declaration.
(set_record_cmdlist): New declaration.
(show_record_cmdlist): New declaration.
(info_record_cmdlist): New declaration.
(cmd_record_goto): New declaration.
* record.c: Remove unnecessary includes.
Include inferior.h.
(cmd_record_goto): Remove declaration.
(record_cmdlist): Now extern. Initialize.
(set_record_cmdlist): Now extern. Initialize.
(show_record_cmdlist): Now extern. Initialize.
(info_record_cmdlist): Now extern. Initialize.
(find_record_target): New.
(require_record_target): New.
(cmd_record_start): Update.
(cmd_record_delete): Remove target-specific code.
Call target_delete_record.
(cmd_record_stop): Unpush any record target.
(set_record_insn_max_num): Move to record-full.c
(set_record_command): Add comment.
(show_record_command): Add comment.
(info_record_command): Update comment.
Remove target-specific code.
Call the record target's to_info_record.
(cmd_record_start): New.
(cmd_record_goto): Now extern.
Remove target-specific code.
Call target_goto_begin, target_goto_end, or target_goto.
(_initialize_record): Move record target ops initialization to
record-full.c.
Change "record" command help text.
Move "record restore", "record set", and "record show" commands to
record-full.c.
* Makefile.in (SFILES): Add record-full.c.
(HFILES_NO_SRCDIR): Add record-full.h.
(COMMON_OBS): Add record-full.o.
* amd64-linux-tdep.c: Include record-full.h instead of record.h.
* arm-tdep.c: Include record-full.h.
* i386-linux-tdep.c: Include record-full.h instead of record.h.
* i386-tdep.c: Include record-full.h.
* infrun.c: Include record-full.h.
* linux-record.c: Include record-full.h.
* moxie-tdep.c: Include record-full.h.
* record-full.c: Include record-full.h.
Change module comment.
(set_record_full_cmdlist): New.
(show_record_full_cmdlist): New.
(record_full_cmdlist): New.
(record_goto_insn): New declaration.
(record_save): New declaration.
(record_check_insn_num): Change query string.
(record_info): New.
(record_delete): New.
(record_is_replaying): New.
(record_goto_entry): New.
(record_goto_begin): New.
(record_goto_end): New.
(record_goto): New.
(init_record_ops): Update.
(init_record_core_ops): Update.
(cmd_record_save): Rename to record_save. Remove target and arg checks.
(cmd_record_start): New.
(set_record_insn_max_num): Moved from record.c
(set_record_full_command): New.
(show_record_full_command): New.
(_initialize_record_full): New.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* dwarf2loc.c (entry_values_debug): Add 'unsigned'.
(_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* dwarf2loc.h: Update the declaration of 'entry_values_debug'.
* dwarf2read.c (dwarf2_die_debug): Add 'unsigned'.
(_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'.
(_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* frame.c (frame_debug): Add 'unsigned'.
(_intialize_frame): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* frame.h: Update the declaration of 'frame_debug'.
* gdbtypes.c (overload_debug): Add 'unsigned'.
(_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* inferior.h: Update declaration of 'debug_infrun'.
* infrun.c (debug_infrun): Add 'unsigned'.
(_initialize_infrun): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* jit.c (jit_debug): Add 'unsigned'.
(_initialize_jit): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* linux-nat.c (debug_linux_nat): Add 'unsigned'.
(_initialize_linux_nat): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* linux-thread-db.c (libthread_db_debug): Add 'unsigned'.
(_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* machoread.c (mach_o_debug_level): Add 'unsigned'.
(_initialize_machoread): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'.
* microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'.
(_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd
intead of add_setshow_zinteger_cmd.
* mips-tdep.c (mips_debug): Add 'unsigned'.
(_initialize_mips_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* monitor.c (monitor_debug): Add 'unsigned'.
(_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* observer.c (observer_debug): Add 'unsigned'.
(_initialize_observer): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* parse.c (expressiondebug): Add 'unsigned'.
(_initialize_parse): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.c (record_debug): Add 'unsigned'.
(_initialize_record): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.h: Update the declaration of 'record_debug'.
* stap-probe.c (stap_expression_debug): Add 'unsigned'.
(_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* serial.c (global_serial_debug_p): Add 'unsigned'.
(_initialize_serial): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'.
(_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-frv.c (solib_frv_debug): Add 'unsigned'.
(_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* target.c (targetdebug): Add 'unsigned'.
(initialize_targets): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* valops.c (overload_debug): Add 'unsigned'.
* varobj.c (varobjdebug): Add 'unsigned'.
(_initialize_varobj): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'.
(_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* arch-utils.h: Remove the declaration of 'gdbarch_debug'.
* gdbarch.sh (gdbarch_debug): Add 'unsigned'.
(extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* gdbarch.c, gdbarch.h: Re-generated.
|
|
* i386-tdep.c (i386_record_modrm, i386_record_lea_modrm_addr)
(i386_process_record): Use record_read_memory.
* record.c (record_read_memory): New function.
(record_arch_list_add_mem, record_exec_insn): Use
record_read_memory.
* record.h (record_read_memory): Declare.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
|
|
* i386-tdep.c (i386_record_lea_modrm): Change warning to query.
(i386_process_record): Ditto.
* record.c (record_memory_query): New variable.
(_initialize_record): New command "set record memory-query".
* record.h (record_memory_query): New extern.
2010-06-22 Hui Zhu <teawater@gmail.com>
* gdb.texinfo: (Process Record and Replay): Add documentation
for command "set record memory-query".
|
|
Automatic update by copyright.sh.
|
|
* Makefile.in (SFILES): Add record.c.
(COMMON_OBS): Add record.o.
* record.c, record.h: New file.
|
