aboutsummaryrefslogtreecommitdiff
path: root/gdb/progspace.h
AgeCommit message (Collapse)AuthorFilesLines
2019-07-09Rename common to gdbsupportTom Tromey1-4/+4
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-01-25Normalize includes to use common/Tom Tromey1-2/+2
This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes.
2019-01-17Change all_objfiles_safe adapter to be a method on program_spaceTom Tromey1-0/+18
This changes the all_objfiles_safe range adapter to be a method on the program space, and fixes up all the users. gdb/ChangeLog 2019-01-15 Tom Tromey <tom@tromey.com> * progspace.h (program_space) <objfiles_safe_range>: New typedef. <objfiles_safe>: New method. * objfiles.h (class all_objfiles_safe): Remove. * objfiles.c (free_all_objfiles, objfile_purge_solibs): Update. * jit.c (jit_inferior_exit_hook): Update.
2019-01-17Change all_objfiles adapter to be a method on program_spaceTom Tromey1-2/+13
This changes the all_objfiles range adapter to be a method on the program space, and fixes up all the users. gdb/ChangeLog 2019-01-17 Tom Tromey <tom@tromey.com> * progspace.h (program_space) <objfiles_range>: New typedef. <objfiles>: New method. <objfiles_head>: Rename from objfiles. (object_files): Update. * guile/scm-progspace.c (gdbscm_progspace_objfiles): Update. * guile/scm-pretty-print.c (ppscm_find_pretty_printer_from_objfiles): Update. * guile/scm-objfile.c (gdbscm_objfiles): Update. * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Update. * python/py-progspace.c (pspy_get_objfiles): Update. * python/py-prettyprint.c (find_pretty_printer_from_objfiles): Update. * python/py-objfile.c (objfpy_lookup_objfile_by_name) (objfpy_lookup_objfile_by_build_id): Update. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update. * windows-tdep.c (windows_iterate_over_objfiles_in_search_order): Update. * symtab.c (iterate_over_symtabs, matching_obj_sections) (expand_symtab_containing_pc, lookup_objfile_from_block) (lookup_static_symbol, basic_lookup_transparent_type) (find_pc_sect_compunit_symtab, find_symbol_at_address) (find_line_symtab, info_sources_command) (default_collect_symbol_completion_matches_break_on) (make_source_files_completion_list, find_main_name): Update. * symmisc.c (print_symbol_bcache_statistics) (print_objfile_statistics, maintenance_print_symbols) (maintenance_print_msymbols, maintenance_print_objfiles) (maintenance_info_symtabs, maintenance_check_symtabs) (maintenance_expand_symtabs, maintenance_info_line_tables): Update. * symfile.c (remove_symbol_file_command, overlay_invalidate_all) (find_pc_overlay, find_pc_mapped_section, list_overlays_command) (map_overlay_command, unmap_overlay_command) (simple_overlay_update, expand_symtabs_matching) (map_symbol_filenames): Update. * symfile-debug.c (set_debug_symfile): Update. * spu-tdep.c (spu_overlay_update, spu_objfile_from_frame): Update. * source.c (select_source_symtab, forget_cached_source_info): Update. * solib.c (solib_read_symbols): Update. * solib-spu.c (append_ocl_sos): Update. * psymtab.c (maintenance_print_psymbols) (maintenance_info_psymtabs, maintenance_check_psymtabs): Update. * probe.c (parse_probes_in_pspace, find_probe_by_pc): Update. * printcmd.c (info_symbol_command): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Update. * objfiles.h (class all_objfiles): Remove. * objfiles.c (have_partial_symbols, have_full_symbols) (have_minimal_symbols, qsort_cmp, update_section_map) (shared_objfile_contains_address_p) (default_iterate_over_objfiles_in_search_order): Update. * objc-lang.c (info_selectors_command, info_classes_command) (find_methods): Update. * minsyms.c (find_solib_trampoline_target): Update. * maint.c (maintenance_info_sections) (maintenance_translate_address, count_symtabs_and_blocks): Update. * main.c (captured_main_1): Update. * linux-thread-db.c (try_thread_db_load_from_pdir) (has_libpthread): Update. * linespec.c (iterate_over_all_matching_symtabs) (search_minsyms_for_name): Update. * jit.c (jit_find_objf_with_entry_addr): Update. * hppa-tdep.c (find_unwind_entry) (hppa_lookup_stub_minimal_symbol): Update. * gcore.c (gcore_create_callback, objfile_find_memory_regions): Update. * elfread.c (elf_gnu_ifunc_resolve_by_cache) (elf_gnu_ifunc_resolve_by_got): Update. * dwarf2-frame.c (dwarf2_frame_find_fde): Update. * dwarf-index-write.c (save_gdb_index_command): Update. * cp-support.c (add_symbol_overload_list_qualified): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * blockframe.c (find_pc_partial_function): Update. * ada-lang.c (ada_lookup_simple_minsym, add_nonlocal_symbols) (ada_collect_symbol_completion_matches) (ada_add_global_exceptions): Update.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-05-29Change program_space::added_solibs to a std::vectorTom Tromey1-4/+1
This changes program_space::added_solibs to a std::vector, removing a VEC. Tested by the buildbot. gdb/ChangeLog 2018-05-29 Tom Tromey <tom@tromey.com> * progspace.h (so_list_ptr): Remove typedef. Don't declare VEC. (struct program_space) <added_solibs>: Now a std::vector. * breakpoint.c (print_solib_event): Update. (check_status_catch_solib): Update. * progspace.c (clear_program_space_solib_cache): Update. * solib.c (update_solib_list): Update.
2018-05-16Make "cbfd" a gdb_bfd_ref_ptrTom Tromey1-1/+2
This changes program_space::cbfd to be a gdb_bfd_ref_ptr. This makes it somewhat less error-prone to use, because now it manages the reference counting automatically. Tested by the buildbot. 2018-05-16 Tom Tromey <tom@tromey.com> * gdbcore.h (core_bfd): Redefine. * corelow.c (core_target::close): Update. (core_target_open): Update. * progspace.h (struct program_space) <cbfd>: Now a gdb_bfd_ref_ptr.
2018-05-11Move core_bfd to program spaceTom Tromey1-0/+3
This moves the core_bfd global to be a field of the program space. It then replaces core_bfd with a macro to avoid a massive patch -- the same approach taken for various other program space fields. This is a basic transformation for multi-target work. 2018-05-11 Tom Tromey <tromey@redhat.com> Pedro Alves <tromey@redhat.com> * corefile.c (core_bfd): Remove. * gdbcore.h (core_bfd): Now a macro. * progspace.h (struct program_space) <cbfd>: New field.
2018-03-02Make program_space::deleted_solibs a vector of std::stringSimon Marchi1-1/+1
This allows removing a usage of free_char_ptr_vec. gdb/ChangeLog: * progspace.h (struct program_space) <deleted_solibs>: Change type to std::vector<std::string>. * progspace.c (clear_program_space_solib_cache): Adjust. * breakpoint.c (print_solib_event): Adjust. (check_status_catch_solib): Adjust. * solib.c (update_solib_list): Adjust. * ui-out.h (class ui_out) <field_string>: New overload. * ui-out.c (ui_out::field_string): New overload.
2018-03-02C++ify program_spaceSimon Marchi1-78/+77
This patch makes program_space a C++ object by adding a constructor/destructor, giving default values to fields, and using new/delete. gdb/ChangeLog: * progspace.h (struct program_space): Add constructor and destructor, initialize fields. (add_program_space): Remove. * progspace.c (add_program_space): Rename to... (program_space::program_space): ... this. (release_program_space): Rename to... (program_space::~program_space): ... this. (delete_program_space): Use delete to delete program_space. (initialize_progspace): Use new to allocate program_space. * inferior.c (add_inferior_with_spaces): Likewise. (clone_inferior_command): Likewise. * infrun.c (follow_fork_inferior): Likewise. (handle_vfork_child_exec_or_exit): Likewise.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-10-04Redesign mock environment for gdbarch selftestsPedro Alves1-0/+11
A following patch will remove this hack from within regcache's implementation: struct regcache * get_thread_arch_regcache (ptid_t ptid, struct gdbarch *gdbarch) { struct address_space *aspace; /* For the benefit of "maint print registers" & co when debugging an executable, allow dumping the regcache even when there is no thread selected (target_thread_address_space internal-errors if no address space is found). Note that normal user commands will fail higher up on the call stack due to no target_has_registers. */ aspace = (ptid_equal (null_ptid, ptid) ? NULL : target_thread_address_space (ptid)); i.e., it'll no longer be possible to try to build a regcache for null_ptid. That change alone would regress the gdbarch self tests though, causing this: (gdb) maintenance selftest [...] Running selftest register_to_value. src/gdb/inferior.c:309: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) FAIL: gdb.gdb/unittest.exp: maintenance selftest (GDB internal error) The problem is that the way the mocking environment for those unit tests is written is a bit fragile: it creates a special purpose regcache (and sentinel's frame), using whatever is the current inferior_ptid (usually null_ptid), and assumes get_current_regcache will find that in the regcache::current_regcache list. This commit changes the way the mock environment is created. It eliminates the special regcache and frame and instead creates a fuller mock environment, with a custom mock target_ops, and then a mock inferior and thread "running" on that target. If there's already a running target when you type "maint selftest", then we error out, instead of pushing a new target on top of the existing one (and thus killing the debug session). This results in: (gdb) maint selftest (...) Self test failed: arch i386: target already pushed Self test failed: arch i386:x86-64: target already pushed Self test failed: arch i386:x64-32: target already pushed Self test failed: arch i8086: target already pushed Self test failed: arch i386:intel: target already pushed Self test failed: arch i386:x86-64:intel: target already pushed Self test failed: arch i386:x64-32:intel: target already pushed Self test failed: arch i386:nacl: target already pushed Self test failed: arch i386:x86-64:nacl: target already pushed Self test failed: arch i386:x64-32:nacl: target already pushed Self test failed: self-test failed at /home/pedro/gdb/mygit/src/gdb/selftest-arch.c:86 (...) Ran 19 unit tests, 1 failed I think that's OK, because self tests are really meant to be run from a clean state right after GDB is started. I'm adding that erroring out just as safe measure just in case someone types "maint selftest" on the command line while already debugging something (as I've done it). (In my multi-target branch, where this patch originated from, we don't actually need to error out, because there each inferior has its own target stack). Also, note that the current code was doing: current_inferior()->gdbarch = gdbarch; without taking care to restore the previous gdbarch. This means that GDB's state was being left inconsistent after running the self tests, further supporting the point that there's probably not much expectation that mixing "maint selftests" and regular debugging in the same GDB invocation really works. This patch fixes that, regardless. gdb/ChangeLog: 2017-10-04 Pedro Alves <palves@redhat.com> * frame.c (create_test_frame): Delete. * frame.h (create_test_frame): Delete. * gdbarch-selftests.c: Include gdbthread.h and target.h. (class regcache_test): Delete. (test_target_has_registers, test_target_has_stack) (test_target_has_memory, test_target_prepare_to_store) (test_target_store_registers): New functions. (test_target_ops): New class. (register_to_value_test): Error out if there's already a process_stratum (or higher) target pushed. Create a fuller mock environment, with mock target_ops, inferior, address space, thread and inferior_ptid. * progspace.c (struct address_space): Move to ... * progspace.h (struct address_space): ... here. * regcache.h (regcache::~regcache, regcache::raw_write) [GDB_SELF_TEST]: No longer virtual.
2017-09-19Use DISABLE_COPY_AND_ASSIGNYao Qi1-5/+1
We have many classes that copy cotr and assignment operator are deleted, so this patch replaces these existing mechanical code with macro DISABLE_COPY_AND_ASSIGN. gdb: 2017-09-19 Yao Qi <yao.qi@linaro.org> * annotate.h (struct annotate_arg_emitter): Use DISABLE_COPY_AND_ASSIGN. * common/refcounted-object.h (refcounted_object): Likewise. * completer.h (struct completion_result): Likewise. * dwarf2read.c (struct dwarf2_per_objfile): Likewise. * filename-seen-cache.h (filename_seen_cache): Likewise. * gdbcore.h (thread_section_name): Likewise. * gdb_regex.h (compiled_regex): Likewise. * gdbthread.h (scoped_restore_current_thread): Likewise. * inferior.h (scoped_restore_current_inferior): Likewise. * jit.c (jit_reader): Likewise. * linespec.h (struct linespec_result): Likewise. * mi/mi-parse.h (struct mi_parse): Likewise. * nat/fork-inferior.c (execv_argv): Likewise. * progspace.h (scoped_restore_current_program_space): Likewise. * python/python-internal.h (class gdbpy_enter): Likewise. * regcache.h (regcache): Likewise. * target-descriptions.c (struct tdesc_reg): Likewise. (struct tdesc_type): Likewise. (struct tdesc_feature): Likewise. * ui-out.h (ui_out_emit_type): Likewise.
2017-05-04RAII-fy make_cleanup_restore_current_thread & friendsPedro Alves1-12/+20
After all the make_cleanup_restore_current_thread fixing, I thought I'd convert that and its relatives (which are all cleanups) to RAII classes. scoped_restore_current_pspace_and_thread was put in a separate file to avoid a circular dependency. Tested on x86-64 Fedora 23, native and gdbserver. gdb/ChangeLog: 2017-05-04 Pedro Alves <palves@redhat.com> * Makefile.in (SFILES): Add progspace-and-thread.c. (HFILES_NO_SRCDIR): Add progspace-and-thread.h. (COMMON_OBS): Add progspace-and-thread.o. * breakpoint.c: Include "progspace-and-thread.h". (update_inserted_breakpoint_locations) (insert_breakpoint_locations, create_longjmp_master_breakpoint): Use scoped_restore_current_pspace_and_thread. (create_std_terminate_master_breakpoint): Use scoped_restore_current_program_space. (remove_breakpoint): Use scoped_restore_current_pspace_and_thread. (print_breakpoint_location): Use scoped_restore_current_program_space. (bp_loc_is_permanent): Use scoped_restore_current_pspace_and_thread. (resolve_sal_pc): Use scoped_restore_current_pspace_and_thread. (download_tracepoint_locations): Use scoped_restore_current_pspace_and_thread. (breakpoint_re_set): Use scoped_restore_current_pspace_and_thread. * exec.c (exec_close_1): Use scoped_restore_current_program_space. (enum step_over_calls_kind): Moved from inferior.h. (class scoped_restore_current_thread): New class. * gdbthread.h (make_cleanup_restore_current_thread): Delete declaration. (scoped_restore_current_thread): New class. * infcmd.c: Include "common/gdb_optional.h". (continue_1, proceed_after_attach): Use scoped_restore_current_thread. (notice_new_inferior): Use scoped_restore_current_thread. * inferior.c: Include "progspace-and-thread.h". (restore_inferior, save_current_inferior): Delete. (add_inferior_command, clone_inferior_command): Use scoped_restore_current_pspace_and_thread. * inferior.h (scoped_restore_current_inferior): New class. * infrun.c: Include "progspace-and-thread.h" and "common/gdb_optional.h". (follow_fork_inferior): Use scoped_restore_current_pspace_and_thread. (scoped_restore_exited_inferior): New class. (handle_vfork_child_exec_or_exit): Use scoped_restore_exited_inferior, scoped_restore_current_pspace_and_thread, scoped_restore_current_thread and scoped_restore. (fetch_inferior_event): Use scoped_restore_current_thread. * linespec.c (decode_line_full, decode_line_1): Use scoped_restore_current_program_space. * mi/mi-main.c: Include "progspace-and-thread.h". (exec_continue): Use scoped_restore_current_thread. (mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread. (mi_cmd_trace_frame_collected): Use scoped_restore_current_thread. * proc-service.c (ps_pglobal_lookup): Use scoped_restore_current_program_space. * progspace-and-thread.c: New file. * progspace-and-thread.h: New file. * progspace.c (release_program_space, clone_program_space): Use scoped_restore_current_program_space. (restore_program_space, save_current_program_space) (save_current_space_and_thread): Delete. (switch_to_program_space_and_thread): Moved to progspace-and-thread.c. * progspace.h (save_current_program_space) (save_current_space_and_thread): Delete declarations. (scoped_restore_current_program_space): New class. * remote.c (remote_btrace_maybe_reopen): Use scoped_restore_current_thread. * symtab.c: Include "progspace-and-thread.h". (skip_prologue_sal): Use scoped_restore_current_pspace_and_thread. * thread.c (print_thread_info_1): Use scoped_restore_current_thread. (struct current_thread_cleanup): Delete. (do_restore_current_thread_cleanup) (restore_current_thread_cleanup_dtor): Rename/convert both to ... (scoped_restore_current_thread::~scoped_restore_current_thread): ... this new dtor. (make_cleanup_restore_current_thread): Rename/convert to ... (scoped_restore_current_thread::scoped_restore_current_thread): ... this new ctor. (thread_apply_all_command): Use scoped_restore_current_thread. (thread_apply_command): Use scoped_restore_current_thread. * tracepoint.c (tdump_command): Use scoped_restore_current_thread. * varobj.c (value_of_root_1): Use scoped_restore_current_thread.
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-07-08Delete program spaces directly when removing inferiorsSimon Marchi1-4/+7
When deleting an inferior, delete the associated program space as well if it becomes unused. This replaces the "pruning" approach, with which you could forget to call prune_program_spaces (as seen, with the -remove-inferior command, see [1]). This allows to remove the prune_program_spaces function. At the same time, I was able to clean up the delete_inferior* family: - delete_inferior is unused - delete_inferior_silent is only used in monitor_close, but is replaced with discard_all_inferiors [2], so it becomes unused - All remaining calls to delete_inferior_1 are with silent=1, so the parameter is removed - delete_inferior_1 is renamed to delete_inferior I renamed pspace_empty_p to program_space_empty_p. I prefer if the "exported" functions have a more explicit and standard name. Tested on Ubuntu 14.10. [1] https://sourceware.org/ml/gdb-patches/2014-09/msg00717.html [2] See https://sourceware.org/ml/gdb-patches/2015-07/msg00228.html and follow-ups for details. gdb/Changelog: * inferior.c (delete_inferior_1): Rename to ... (delete_inferior): ..., remove 'silent' parameter, delete program space when unused and remove call to prune_program_spaces. Remove the old, unused, delete_inferior. (delete_inferior_silent): Remove. (prune_inferiors): Change call from delete_inferior_1 to delete_inferior and remove 'silent' parameter. Remove call to prune_program_spaces. (remove_inferior_command): Idem. * inferior.h (delete_inferior_1): Rename to... (delete_inferior): ..., remove 'silent' parameter and remove the original delete_inferior. (delete_inferior_silent): Remove. * mi/mi-main.c (mi_cmd_remove_inferior): Change call from delete_inferior_1 to delete_inferior and remove 'silent' parameter. * progspace.c (prune_program_spaces): Remove. (pspace_empty_p): Rename to... (program_space_empty_p): ... and make non-static. (delete_program_space): New. * progspace.h (prune_program_spaces): Remove declaration. (program_space_empty_p): New declaration. (delete_program_space): New declaration. * monitor.c (monitor_close): Replace call to delete_thread_silent and delete_inferior_silent with discard_all_inferiors.
2015-07-08Revert "Delete program spaces directly when removing inferiors"Simon Marchi1-7/+4
Reverted, since it causes a build failure. It turns out that delete_inferior_silent wasn't actually unused. This reverts commit 0560c645c02eba2828a053039dcfdf676cdd1d00.
2015-07-08Delete program spaces directly when removing inferiorsSimon Marchi1-4/+7
When deleting an inferior, delete the associated program space as well if it becomes unused. This replaces the "pruning" approach, with which you could forget to call prune_program_spaces (as seen, with the -remove-inferior command, see [1]). This allows to remove the prune_program_spaces function. At the same time, I was able to clean up the delete_inferior* family. delete_inferior_silent and delete_inferior were unused, which allowed renaming delete_inferior_1 to delete_inferior. Also, since all calls to it were with silent=1, I removed that parameter completely. I renamed pspace_empty_p to program_space_empty_p. I prefer if the "exported" functions have a more explicit and standard name. Tested on Ubuntu 14.10. This obsoletes my previous patch "Add call to prune_program_spaces in mi_cmd_remove_inferior" [1]. [1] https://sourceware.org/ml/gdb-patches/2014-09/msg00717.html gdb/Changelog: * inferior.c (delete_inferior_1): Rename to ... (delete_inferior): ..., remove 'silent' parameter, delete program space when unused and remove call to prune_program_spaces. Remove the old, unused, delete_inferior. (delete_inferior_silent): Remove. (prune_inferiors): Change call from delete_inferior_1 to delete_inferior and remove 'silent' parameter. Remove call to prune_program_spaces. (remove_inferior_command): Idem. * inferior.h (delete_inferior_1): Rename to... (delete_inferior): ..., remove 'silent' parameter and remove the original delete_inferior. (delete_inferior_silent): Remove. * mi/mi-main.c (mi_cmd_remove_inferior): Change call from delete_inferior_1 to delete_inferior and remove 'silent' parameter. * progspace.c (prune_program_spaces): Remove. (pspace_empty_p): Rename to... (program_space_empty_p): ... and make non-static. (delete_program_space): New. * progspace.h (prune_program_spaces): Remove declaration. (program_space_empty_p): New declaration. (delete_program_space): New declaration.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-10-02Reduce Hg packet (select remote general thread) bouncingPedro Alves1-1/+2
A patch I wrote made GDB pull the thread list sooner when debugging with target remote, and I noticed an intended consequence. GDB started bouncing around the currently selected remote/general thread more frequently. E.g.: Sending packet: $qTMinFTPILen#3b...Packet received: 5 +Sending packet: $Hgp726d.726d#53...Packet received: OK Sending packet: $m400680,40#2f...Packet received: 85c0741455bff00d60004889e5ffd05de97bffffff0f1f00e973ffffff0f1f00554889e5c745fc00000000c745fc01000000e900000000c745fc02000000b800 +Sending packet: $Hgp726d.7278#28...Packet received: OK Sending packet: $m4006b2,1#28...Packet received: e9 Fast tracepoint 2 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53. Sending packet: $qTStatus#49...Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes:: This ended up breaking "tstart" when one has fast tracepoints set, because gdbserver isn't expecting an Hg packet in response to qRelocInsn: (gdb) ftrace *set_point Fast tracepoint 3 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53. (gdb) PASS: gdb.trace/range-stepping.exp: ftrace: ftrace *set_point tstart gdbserver: Malformed response to qRelocInsn, ignoring: Hgp2783.2783 Target does not support this command. (gdb) FAIL: gdb.trace/range-stepping.exp: ftrace: tstart remote_trace_start should probably start by making sure the remote current thread matches inferior_ptid (calling set_general_thread), but still, reducing unnecessary bouncing is a good idea. It happens because the memory/symbol/breakpoint routines use switch_to_program_space_and_thread to do something in the right context and then revert back to the previously current thread. The fix is to simply make any_thread_of_process, find_inferior_for_program_space, etc. give preference to the current thread/inferior it if matches. gdb/ 2014-10-02 Pedro Alves <palves@redhat.com> * gdbthread.h (any_thread_of_process, any_live_thread_of_process): Adjust comments. * inferior.c (find_inferior_for_program_space): Give preference to the current inferior. * inferior.h (find_inferior_for_program_space): Update comment. * progspace.c (switch_to_program_space_and_thread): Prefer the current inferior if it's bound to the program space requested. If the inferior found doesn't have a PID yet, don't bother looking up a thread. * progspace.h (switch_to_program_space_and_thread): Adjust comment. * thread.c (any_thread_of_process, any_live_thread_of_process): Give preference to the current thread.
2014-05-17 * progspace.c (remove_program_space): Delete, unused.Doug Evans1-3/+0
* progspace.h (remove_program_space): Ditto.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-20Associate target_dcache to address_space.Yao Qi1-0/+1
Hi, Nowadays, 'target_dcache' is a global variable in GDB, which is not necessary. It can be a per-address-space variable. In this patch, we associate target_dcache to address_space. gdb/doc: 2013-11-20 Yao Qi <yao@codesourcery.com> * gdb.texinfo (Caching Target Data): Update doc for per-address-space dcache. gdb: 2013-11-20 Yao Qi <yao@codesourcery.com> * progspace.h (struct address_space_data): Declare. * target-dcache.c: Include "progspace.h". (target_dache): Remove. (target_dcache_aspace_key): New. (target_dcache_cleanup): New function. (target_dcache_init_p): Get data through target_dcache_aspace_key. (target_dcache_invalidate): Likewise. (target_dcache_get): Likewise. (target_dcache_get_or_init): Likewise. (_initialize_target_dcache): Initialize target_dcache_aspace_key.
2013-11-20Add REGISTRY for struct address_space.Yao Qi1-0/+5
This patch adds REGISTRY for struct address_space. gdb: 2013-11-20 Yao Qi <yao@codesourcery.com> * progspace.c (struct address_space): Update comments. <REGISTRY_FIELDS>: New fields. DEFINE_REGISTRY for address_space. (new_address_space): Call address_space_alloc_data. (free_address_space): Call address_space_free_data. * progspace.h: Use DECLARE_REGISTRY.
2013-08-28PR gdb/15415Jan Kratochvil1-0/+4
gdb/ 2013-08-27 Jan Kratochvil <jan.kratochvil@redhat.com> PR gdb/15415 * corefile.c (get_exec_file): Use exec_filename. * defs.h (OPF_DISABLE_REALPATH): New definition. Add new comment. * exec.c (exec_close): Free EXEC_FILENAME. (exec_file_attach): New variable canonical_pathname. Use OPF_DISABLE_REALPATH. Call gdb_realpath explicitly. Set EXEC_FILENAME. * exec.h (exec_filename): New. * inferior.c (print_inferior, inferior_command): Use PSPACE_EXEC_FILENAME. * mi/mi-main.c (print_one_inferior): Likewise. * progspace.c (clone_program_space, print_program_space): Likewise. * progspace.h (struct program_space): New field pspace_exec_filename. * source.c (openp): Describe OPF_DISABLE_REALPATH. New variable realpath_fptr, initialize it from OPF_DISABLE_REALPATH, use it. gdb/testsuite/ 2013-08-27 Jan Kratochvil <jan.kratochvil@redhat.com> PR gdb/15415 * gdb.base/argv0-symlink.c: New file. * gdb.base/argv0-symlink.exp: New file.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-08-22 * auto-load.c (_initialize_auto_load): Update.Tom Tromey1-11/+3
* solib-svr4.c (_initialize_svr4_solib): Update * solib-dsbt.c (_initialize_dsbt_solib): Update. * solib-darwin.c (_initialize_darwin_solib): Update. * registry.h: New file. * python/py-progspace.c (gdbpy_initialize_pspace): Update. * python/py-inferior.c (gdbpy_initialize_inferior): Update. * progspace.h: Include registry.h. Use DECLARE_REGISTRY. (register_program_space_data_with_cleanup) (register_program_space_data, program_space_alloc_data) (clear_program_space_data, set_program_space_data) (program_space_data): Don't declare. * progspace.c: Use DEFINE_REGISTRY. (struct program_space_data, struct program_space_data_registration, struct program_space_data_registry, program_space_data_registry) (register_program_space_data_with_cleanup) (register_program_space_data, program_space_alloc_data) (program_space_free_data, clear_program_space_data) (set_program_space_data, program_space_data): Remove. * objfiles.h: Include registry.h. Use DECLARE_REGISTRY. (struct objfile) <data, num_data>: Replace with REGISTRY_FIELDS. (register_objfile_data_with_cleanup, register_objfile_data) (clear_objfile_data, set_objfile_data, objfile_data): Don't declare. * objfiles.c: Use DEFINE_REGISTRY. (struct objfile_data, struct objfile_data_registration, struct objfile_data_registry, objfile_data_registry) (register_objfile_data_with_cleanup, register_objfile_data) (objfile_alloc_data, objfile_free_data, clear_objfile_data) (set_objfile_data, objfile_data): Remove. (_initialize_objfiles): Update. * jit.c (_initialize_jit): Update. * inflow.c (_initialize_inflow): Update. * inferior.h: Include registry.h. Use DECLARE_REGISTRY. (struct inferior) <data, num_data>: Replace with REGISTRY_FIELDS. (register_inferior_data_with_cleanup, register_inferior_data) (clear_inferior_data, set_inferior_data, inferior_data): Don't declare. * inferior.c: Use DEFINE_REGISTRY. (struct inferior_data, struct inferior_data_registration, struct inferior_data_registry, inferior_data_registry) (register_inferior_data_with_cleanup, register_inferior_data) (inferior_alloc_data, inferior_free_data clear_inferior_data) (set_inferior_data, inferior_data): Remove. * auxv.c (_initialize_auxv): Update. * ada-lang.c (_initialize_ada_language): Update. * breakpoint.c (_initialize_breakpoint): Update. * i386-nat.c (i386_use_watchpoints): Update.
2012-01-24 PR symtab/12406:Tom Tromey1-0/+17
* solib.c (update_solib_list): Update the program space's added_solibs and deleted_solibs fields. * progspace.h (struct program_space) <added_solibs, deleted_solibs>: New fields. (clear_program_space_solib_cache): Declare. * progspace.c (release_program_space): Call clear_program_space_solib_cache. (clear_program_space_solib_cache): New function. * infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>: Call bpstat_stop_status. Use handle_solib_event. * breakpoint.c: Include gdb_regex.h. (print_solib_event): New function. (bpstat_print): Use print_solib_event. (bpstat_stop_status): Add special case for bp_shlib_event. (handle_solib_event): New function. (bpstat_what): Use handle_solib_event. (struct solib_catchpoint): New. (dtor_catch_solib, insert_catch_solib, remove_catch_solib) (breakpoint_hit_catch_solib, check_status_catch_solib) (print_it_catch_solib, print_one_catch_solib) (print_mention_catch_solib, print_recreate_catch_solib): New functions. (catch_solib_breakpoint_ops): New global. (catch_load_or_unload, catch_load_command_1) (catch_unload_command_1): New functions. (internal_bkpt_check_status): Add special case for bp_shlib_event. (internal_bkpt_print_it): Use print_solib_event. (initialize_breakpoint_ops): Initialize catch_solib_breakpoint_ops. (_initialize_breakpoint): Register "catch load" and "catch unload". * breakpoint.h (handle_solib_event): Declare. * NEWS: Add entry for "catch load" and "catch unload". gdb/doc * gdb.texinfo (Set Catchpoints): Document "catch load" and "catch unload". (Files): Mention new catch commands. (GDB/MI Async Records): Likewise. gdb/testsuite * lib/mi-support.exp (mi_expect_stop): Add special case for solib-event. * gdb.base/catch-load-so.c: New file. * gdb.base/catch-load.exp: New file. * gdb.base/catch-load.c: New file. * gdb.base/break-interp.exp (reach_1): Update regexp.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker1-1/+1
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-07-262011-07-26 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov1-0/+3
* progspace.h (struct program_space): Add solib_add_generation. * infcmd.c (post_create_inferior): Only call solib_add if not already done. * solib.c (solib_add): Increment solib_add_generation.
2011-01-102011-01-10 Michael Snyder <msnyder@vmware.com>Michael Snyder1-2/+2
* nto-procfs.c: Comment cleanup, mostly periods and spaces. * nto-tdep.c: Ditto. * nto-tdep.h: Ditto. * objc-exp.y: Ditto. * objc-lang.c: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * observer.c: Ditto. * opencl-lang.c: Ditto. * osabi.c: Ditto. * parse.c: Ditto. * parser-defs.h: Ditto. * p-exp.y: Ditto. * p-lang.c: Ditto. * posix-hdep.c: Ditto. * ppcbug-rom.c: Ditto. * ppc-linux-nat.c: Ditto. * ppc-linux-tdep.c: Ditto. * ppc-linux-tdep.h: Ditto. * ppcnbsd-tdep.c: Ditto. * ppcobsd-tdep.c: Ditto. * ppcobsd-tdep.h: Ditto. * ppc-sysv-tdep.c: Ditto. * ppc-tdep.h: Ditto. * printcmd.c: Ditto. * proc-abi.c: Ditto. * proc-flags.c: Ditto. * procfs.c: Ditto. * proc-utils.h: Ditto. * progspace.h: Ditto. * prologue-value.c: Ditto. * prologue-value.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * ravenscar-sparc-thread.c: Ditto. * ravenscar-thread.c: Ditto. * ravenscar-thread.h: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote.c: Ditto. * remote-fileio.c: Ditto. * remote-fileio.h: Ditto. * remote.h: Ditto. * remote-m32r-sdi.c: Ditto. * remote-mips.c: Ditto. * remote-sim.c: Ditto. * rs6000-aix-tdep.c: Ditto. * rs6000-nat.c: Ditto. * rs6000-tdep.c: Ditto.
2011-01-052011-01-05 Michael Snyder <msnyder@vmware.com>Michael Snyder1-1/+2
* addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-01run copyright.sh for 2011.Joel Brobecker1-1/+1
2010-01-01Update copyright year in most headers.Joel Brobecker1-1/+1
Automatic update by copyright.sh.
2009-11-15 * breakpoint.c (should_be_inserted): Don't insert breakpoints ifPedro Alves1-0/+4
the pspace doesn't allow breakpoints. (insert_breakpoint_locations): Remove waiting_for_vfork_done special case. Expect watchpoints that shouldn't be inserted, to not be inserted. * progspace.h (struct program_space) <breakpoints_not_allowed>: New field. * infrun.c (handle_inferior_event): Clear it. * linux-nat.c (linux_child_follow_fork): Set it.
2009-10-20 * linux-nat.c (linux_nat_thread_address_space): New.Pedro Alves1-0/+3
(linux_nat_add_target): Install it. * progspace.c (address_space_num): New. * progspace.h (address_space_num): Declare. * target.c (target_thread_address_space): Really query the target. * target.h (struct target_ops) <to_thread_address_space>: New field.
2009-10-192009-10-19 Pedro Alves <pedro@codesourcery.com>Pedro Alves1-0/+283
Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
generated by cgit v1.1 at 2024-11-22 10:30:03 +0000