Age | Commit message (Collapse) | Author | Files | Lines |
|
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
|
|
init_trace_fun. Move the code which gets us through the shell
to new function startup_inferior.
* inferior.h: Declare startup_inferior.
* procfs.c (procfs_init_inferior), inftarg.c (ptrace_him):
Call startup_inferior.
* m3-nat.c (m3_trace_him): Call intercept_exec_calls.
* config/nm-m3.h: Don't define STARTUP_INFERIOR.
* config/i386/tm-i386m3.h, config/ns32k/tm-ns32k.h,
config/mips/tm-mipsm3.h: Don't define START_INFERIOR_TRAPS_EXPECTED.
|
|
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
|
|
entry to _exit. Also, cleanup procinfo list when process dies of
it's own accord (as opposed to being killed).
|
|
files. Use PIOCWSTOP instead.
* corelow.c (add_to_thread_list): Fix arg to match prototype.
|
|
isn't available.
* (procfs_notice_signals): Fix prototype.
|
|
Thread-specific breakpoint support.
* breakpoint.h (struct breakpoint): Add thread id field.
* fork-child.c (fork_inferior): Move call to init_thread_list()
back a bit so that init_trace_fun can do thread functions.
* hppa-tdep.c (restore_pc_queue): Add pid to call to target_wait.
* hppab-nat.c (child_resume): Handle default pid.
* hppah-nat.c (child_resume): Handle default pid.
* i386lynx-nat.c (child_wait): New arg pid.
* inflow.c (kill_command): Reset thread list.
* infptrace.c (child_resume): Handle default pid.
* infrun.c: Thread-specific breakpoint support.
* inftarg.c (child_wait): Add pid arg.
* osfsolib.c (solib_create_inferior_hook): Add pid to call to
target_resume.
* procfs.c: Multi-thread support.
* remote-bug.c (bug_wait): Add pid arg.
* remote-hms.c (hms_wait): Add pid arg.
* remote-mips.c (mips_wait): Add pid arg.
* remote-mon.c (monitor_wait): Add pid arg.
* remote-nindy.c (nindy_wait): Add pid arg.
* remote-sim.c (gdbsim_wait): Add pid arg.
* remote-udi.c (udi_wait): Add pid arg.
* remote-vx.c (vx_wait): Add pid arg.
* remote-z8k.c (sim_wait): Add pid arg.
* remote.c (remote_wait): Add pid arg.
* solib.c (solib_create_inferior_hook): Add pid to call to
target_resume.
* target.h (struct target_ops): Add pid arg to to_wait and
to_notice_signals.
* thread.c (valid_thread_id): New func to validate thread #s.
* (pid_to_thread_id): New func to do the obvious.
* thread.h: Prototypes for above.
* coff-solib.c (coff_solib_add): Use nameoffset field to locate
filename.
|
|
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
|
|
is SIG_DFL.
* procfs.c (procfs_resume): Skip the unnecessary PRSVADDR on all
systems, not just Solaris.
|
|
or "the program being debugged".
* inflow.c (try_writing_regs): Remove; it's been #if 0'd forever
and I'm getting sick of maintaining it.
|
|
Irix 4.x, which stores regs a bit differently from other /proc
based systems.
* procfs.c, core-svr4.c: Move fetch_core_registers from procfs.c
to new file core-svr4.c.
* config/i386/i386sol2.mh, config/i386/i386v4.mh, config/m68k/amix.mh,
config/i386/ncr3000.mh, config/sparc/sun4sol2.mh: Add core-svr4.o
to NATDEPFILES.
* config/mips/irix4.mh: Add corelow.o to NATDEPFILES.
|
|
new routines to deal with sending SIGINTs to attached processes
when the user interrupts the controlling GDB.
* inftarg.c (child_wait), procfs.c (procfs_wait): Add calls to
the aforementioned routines when waiting for the attached process.
|
|
|
|
Iris3 has not.
* mips-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
fill_fpregset): removed to irix4-nat.c
* mips-xdep.c: removed.
* irix4-nat.c, mips-nat.c, nm-irix3.h, nm-irix4.h, nm-mips.h: new
files.
* procfs.c: include nm.h.
* xm-irix3.h (U_REGS_OFFSET, FETCH_INFERIOR_REGISTERS): removed.
* xm-irix4.h: bump copyright.
(U_REGS_OFFSET, FETCH_INFERIOR_REGISTERS, USE_PROC_FS,
PROC_NAME_FMT): removed.
* xm-mips.h (FETCH_INFERIOR_REGISTERS): removed.
* config/irix4.mh (XDEPFILES): removed procfs.o fork-child.o.
(NAT_FILE, NATDEPFILES): new macros for native support.
(CC): supply default compiler switches.
* config/irix3.mh (XDEPFILES): removed infptrace.o inftarg.o fork-child.o coredep.o.
(NAT_FILE, NATDEPFILES): new macros for native support. Note that
irix3 is untested.
* config/decstation.mh (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o mips-xdep.o coredep.o.
(NAT_FILE, NATDEPFILES): new macros for native support.
|
|
to_notice_signals.
* inferior.h (proc_signal_handling_change): prototype removed.
* infrun.c (NOTICE_SIGNAL_HANDLING_CHANGE): default removed.
(handle_command): now calls target_notice_signals.
* procfs.c (proc_signal_handling_change): renamed to
procfs_notice_signals. Now static. Add prototype. All callers
changed.
* target.h (struct target_ops): new field, to_notice_signals.
(target_notice_signals): new macro to cover new field.
* target.c (cleanup_target): default to_notice_signals to ignore.
* corelow.c (core_ops),
exec.c (exec_ops),
inftarg.c (child_ops),
procfs.c (procfs_ops),
remote-adapt.c (adapt-ops),
remote-eb.c (eb_ops),
remote-es1800.c (es1800_ops, es1800_child_ops),
remote-hms.c (hms_ops),
remote-mm.c (mm_ops),
remote-nindy.c (nindy_ops),
remote-st2000.c (st2000_ops),
remote-udi.c (udi_ops),
remote-vx.c (vx_ops, vx_run_ops),
remote.c (remote_ops),
target.c (dummy_target),
xcoffexec.c (exec_ops): added static initializer for
to_notice_signals.
* xm-irix4.h, xm-sysv4.h (NOTICE_SIGNAL_HANDLING_CHANGE): removed.
|
|
* inferior.h (proc_wait, inferior_proc_init, proc_set_exec_trap):
No longer global functions.
(fork_inferior): New global function from fork-child.c.
* inftarg.c (child_wait): Remove USE_PROC_FS conditional.
(ptrace_me, ptrace_him): New stub functions for fork_inferior().
(child_create_inferior): Moved to fork-child.c as fork_inferior.
(child_create_inferior): New tiny function that calls fork_inferior.
* fork-child.c: New file, containing fork_inferior, which is
built from slight mods to inftarg.c's child_create_inferior.
* procfs.c (procfs_ops): Add target vector.
(attach): Rename as static do_attach.
(procfs_create_inferior): New tiny function that calls fork_inferior.
(child_xfer_memory): Rename to static procfs_xfer_memory.
(store_inferior_registers): Rename to static procfs_store_registers.
(inferior_proc_init): Rename to static procfs_init_inferior.
(procfs_attach, procfs_detach, procfs_prepare_to_store,
procfs_files_info, procfs_open, procfs_mourn_inferior,
procfs_can_run): Slightly mangled copies of the corresponding
child_XXX routines from inftarg.c.
(proc_wait): Renamed to static procfs_wait.
(child_resume): Rename to static procfs_resume.
(fetch_inferior_registers): Rename to static procfs_fetch_registers.
(initialize_proc_fs): Rename to initialize_procfs. Set up
procfs_ops, too.
* xm-irix4.h, xm-sysv4.h (CREATE_INFERIOR_HOOK): No longer needed.
|
|
through the target vector.
* inferior.h (kill_inferior_fast): remove declaration.
* main.c (disconnect): call quit_cover using catch_errors rather
than calling kill_inferior_fast directly. New way goes through
the target vector, handles attached processes, and writes
command history if appropriate.
(quit_cover): new function, wrapper for quit_command.
* convex-xdep.c, go32-xdep.c, hppabsd-xdep.c, hppahpux-xdep.c,
infptrace.c, procfs.c: Removed all instances of kill_inferior_fast,
inlining them into the local kill_inferior when needed.
|
|
error from PIOCSWSTOP.
|
|
* dbxread.c (process_one_symbol): Parse N_OPT "gcc2_compiled.".
* procfs.c (proc_set_exec_trap): Set run-on-last-close flag on
child processes, to avoid dead ones "hanging around" after GDB exits.
(attach): Always stop the process if it needs it. Set RLC flag
when attaching running processes, so it will continue if we detach
it, quit, or are killed.
(detach): Clear faults and set RLC flag to make process run
when we close it.
(open_proc_file): New `mode' argument for O_RDONLY or O_RDWR.
Callers changed.
(info_proc): Open process O_RDONLY, so we can see any process,
even those controlled by debuggers.
* tm-sun4sol2.h (SUN_FIXED_LBRAC_BUG): They did (in Sol 2).
|
|
core.c, cplus-dem.c, dbxread.c, dwarfread.c, elfread.c, environ.c,
eval.c, findvar.c, gdbtypes.c, hppabsd-tdep.c, hppahpux-tdep.c,
i386-tdep.c, ieee-float.c, infcmd.c, inflow.c, infptrace.c,
infrun.c, m2-exp.y, mipsread.c, objfiles.c, parse.c, procfs.c,
putenv.c, remote-mm.c, remote-vx.c, solib.c, sparc-tdep.c,
sparc-xdep.c, stack.c, symfile.c, symtab.c, symtab.h, target.c,
tm-i386v.h, tm-sparc.h, utils.c, valarith.c, valops.c, valprint.c,
values.c, xcoffread.c:
Remove "(void)" casts from function calls where the return value
is ignored, in accordance with GNU coding standards.
|
|
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
|
|
|
|
where there is no place for nPC in prrun struct.
|
|
* coffread.c (coff_end_symtab): Cast 2nd arg of complain() to
correct type.
* defs.h (NORETURN): Define away for Lucid compiler.
* remote.c (remote_timer, remote_interrupt): Signal handlers
take one int arg.
* ser-termios.c (serial_write, serial_close): Return whatever
value the write/close call returns, rather than falling off end.
* inferior.h (PTRACE_ARG3_TYPE): Third arg to ptrace is int on
more systems than it is "char *". Define PTRACE_ARG3_TYPE to
default to int.
* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
inferior.h (call_ptrace): Use PTRACE_ARG3_TYPE to declare type
of third arg.
* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
symm-xdep.c, ultra3-xdep.c: Use PTRACE_ARG3_TYPE to cast ptrace
argument 3.
* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
store_inferior_registers): Supply missing fourth argument to
ptrace().
|
|
disconnecting from controlling terminal, to avoid gdb hanging
on SVR4. Fixes bug reported by Oliver Okrongli.
* procfs.c (PROC_NAME_FMT): Change format to match default used
by system, as suggested by Oliver Okrongli.
* tm-68k.h (FRAME_FIND_SAVED_REGS): Apply missing parentheses
bug fix from Brent Townshend (bst%tt@cam.ORG).
* c-exp.y (nonempty_typelist): Fix memory overrun bug reported
by turlais@rechser.total.fr.
* dwarfread.c (decode_subscr_data): Fix bug in calculation of
length of non-zero lowerbound arrays. Bug fix from Peggy Fieland.
* objfiles.h (unlink_objfile): Add prototype.
* objfiles.c (unlink_objfile): Add function.
* objfiles.c (free_objfile): Call unlink_objfile.
* objfiles.c (allocate_objfile): Call unlink_objfile on newly
remapped objfiles. Bug reported by hahn@sunshine.labs.tek.com.
Also, discard old possibly bogus sf struct.
* symfile.c (symbol_file_add): Call init_entry_point_info() and
find_sym_fns() for remapped symbol files, in case of any changes
since the last mapping.
|
|
libiberty/strsignal.c. Widespread changes to use libiberty/strerror.c
functions for errno manipulations and libiberty/strsignal.c for signo
(signals) manipulations.
|
|
stopped during attach, thus stopping it again.
|
|
character type is unsigned. Add some cases to the tables in procfs.c
for constants defined in newer SVR4 systems and reorder the tests for
ioctl support of resetting the inherit-on-fork flag to favor the latest
method using PIOCRESET.
|
|
fix a couple of small bugs. Changes to other files mostly to fix minor
things pointed out by the SGI compiler. See ChangeLog for complete details.
|
|
needlessly stomped. Changes in elfread.c and solib.c to fix DWARF
processing, broken by other recent changes.
|
|
commands in .cshrc/.profile won't get traced.
|
|
gdb/.Sanitize gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h
gdb/xm-irix4.h gdb/config/.Sanitize gdb/config/mt-irix3
gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
|
|
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
|
|
will make ChangeLog entries for all of them.
|
|
|
|
command that prints /proc specific information, changes to solib.c to
allow more flexible handling of finding the dynamic linker structures,
changes to utils.c and defs.h to add a new null_cleanup() function to
serve as an anchor point for cleanup chains with no obvious "first
cleanup".
|
|
SVR4 shared libraries in a manner very close to the original SunOS support.
See the ChangeLog for details.
|
|
* param-no-tm.h: Change users to define TM_FILE_OVERRIDE instead.
* param.h, param-no-tm.h: Removed.
* Update copyrights in all changed files.
* dbxread.c, dwarfread.c, inflow.c, infrun.c, m2-exp.y, putenv.c,
solib.c, symtab.h, tm-umax.h, valprint.c: Lint.
* tm-convex.h, tm-hp300hpux.h, tm-merlin.h, tm-sparc.h,
xm-merlin.h: Avoid host include files in target descriptions.
* getpagesize.h: Removed, libiberty copes now.
|
|
This is required to supply some typedefs used in files included via
param.h.
|
|
core file (core.c), permanently remove the register_addr() stub (elfread.c),
move a misplaced #endif (procfs.c), and add fetch_core_registers func for
core file support (procfs.c).
|
|
/proc (process file system) support, Amiga UNIX target and host defines, SVR4
target and host defines, and m68k hosts defines.
|