| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Currently, we always re-set all locations of all breakpoints. This
commit makes us re-set only locations of the current program space.
If we loaded symbols to a program space (e.g., "file" command or some
shared library was loaded), GDB must run through all breakpoints and
determine if any new locations need to be added to the breakpoint.
However, there's no reason to recreate locations for _other_ program
spaces, as those haven't changed.
Similarly, when we create a new inferior, through e.g., a fork, GDB
must run through all breakpoints and determine if any new locations
need to be added to the breakpoint. There's no reason to destroy the
locations of the parent inferior and other inferiors. We know those
won't change.
In addition to being inneficient, resetting breakpoints of inferiors
that are currently running is problematic, because:
- some targets can't read memory while the inferior is running.
- the inferior might exit while we're re-setting its breakpoints,
which may confuse prologue skipping.
I went through all the places where we call breakpoint_re_set, and it
seems to me that all can be changed to only re-set locations of the
current program space.
The patch that reversed threads order in "info threads" etc. happened
to make gdb.threads/fork-plus-thread.exp expose this problem when
testing on x86/-m32. The problem was latent and masked out by chance
by the code-cache:
https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html
Tested on x86-64 F20, native (-m64/-m32) and extended-remote
gdbserver.
Fixes the regression discussed in the url above with --target_board=unix/-m32:
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout)
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited)
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
gdb/ChangeLog:
2016-01-19 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
* break-catch-throw.c (re_set_exception_catchpoint): Pass the
current program space down to linespec decoding and breakpoint
location updating.
* breakpoint.c (parse_breakpoint_sals): Adjust calls to
decode_line_full.
(until_break_command): Adjust calls to decode_line_1.
(base_breakpoint_decode_location, bkpt_decode_location): Add
'search_pspace' parameter. Pass it along.
(bkpt_probe_create_sals_from_location): Adjust calls to
parse_probes.
(tracepoint_decode_location, tracepoint_probe_decode_location)
(strace_marker_decode_location): Add 'search_pspace' parameter.
Pass it along.
(all_locations_are_pending): Rewrite to take a breakpoint and
program space as arguments instead.
(hoist_existing_locations): New function.
(update_breakpoint_locations): Add 'filter_pspace' parameter. Use
hoist_existing_locations instead of always removing all locations,
and adjust to all_locations_are_pending change.
(location_to_sals): Add 'search_pspace' parameter. Pass it along.
Don't disable the breakpoint if there are other locations in
another program space.
(breakpoint_re_set_default): Adjust to pass down the current
program space as filter program space.
(decode_location_default): Add 'search_pspace' parameter and pass
it along.
(prepare_re_set_context): Don't switch program space here.
(breakpoint_re_set): Use save_current_space_and_thread instead of
save_current_program_space.
* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
'search_pspace' parameter.
(update_breakpoint_locations): Add 'filter_pspace' parameter.
* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
decode_line_1.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
program space as filter program space.
* linespec.c (struct linespec_state) <search_pspace>: New field.
(create_sals_line_offset, convert_explicit_location_to_sals)
(parse_linespec): Pass the search program space down.
(linespec_state_constructor): Add 'search_pspace' parameter.
Store it.
(linespec_parser_new): Add 'search_pspace' parameter and pass it
along.
(linespec_lex_to_end): Adjust.
(decode_line_full, decode_line_1): Add 'search_pspace' parameter
and pass it along.
(decode_line_with_last_displayed): Adjust.
(collect_symtabs_from_filename, symtabs_from_filename): New
'search_pspace' parameter. Use it.
(find_function_symbols): Pass the search program space down.
* linespec.h (decode_line_1, decode_line_full): Add
'search_pspace' parameter.
* probe.c (parse_probes_in_pspace): New function, factored out
from ...
(parse_probes): ... this. Add 'search_pspace' parameter and use
it.
* probe.h (parse_probes): Add pspace' parameter.
* python/python.c (gdbpy_decode_line): Adjust.
* tracepoint.c (scope_info): Adjust.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This patch improves the error reporting when handling SystemTap SDT
probes. "Handling", in this case, mostly means "parsing".
On gdb/probe.h, only trivial changes on functions' comments in order
to explicitly mention that some of them can throw exceptions. This is
just to make the API a bit more clear.
On gdb/stap-probe.c, I have s/internal_error/error/ on two functions
that are responsible for parsing specific bits of the probes'
arguments: stap_get_opcode and stap_get_expected_argument_type. It is
not correct to call internal_error on such situations because it is
not really GDB's fault if the probes have malformed arguments. I also
improved the error reported on stap_get_expected_argument_type by also
including the probe name on it.
Aside from that, and perhaps most importantly, I added a check on
stap_get_arg to make sure that we don't try to extract an argument
from a probe that has no arguments. This check issues an
internal_error, because it really means that GDB is doing something it
shouldn't.
Although it can be considered almost trivial, and despite the fact
that I am the maintainer for this part of the code, I am posting this
patch for review. I will wait a few days, and if nobody has anything
to say, I will go ahead and push it.
gdb/ChangeLog:
2015-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* probe.h (struct probe_ops) <get_probe_argument_count,
evaluate_probe_argument, enable_probe, disable_probe>: Mention in
the comment that the function can throw an exception.
(get_probe_argument_count): Likewise.
(evaluate_probe_argument): Likewise.
* stap-probe.c (stap_get_opcode): Call error instead of
internal_error.
(stap_get_expected_argument_type): Likewise. Add argument
'probe'. Improve error message by mentioning the probe's name.
(stap_parse_probe_arguments): Adjust call to
stap_get_expected_argument_type.
(stap_get_arg): Add comment. Assert that 'probe->args_parsed' is
not zero. Call internal_error if GDB requests an argument but the
probe has no arguments.
|
|
This patch converts the code base to use the new struct event_location
API being introduced. This patch preserves the current functionality and
adds no new features.
The "big picture" API usage introduced by this patch may be illustrated
with a simple exmaple. Where previously developers would write:
void
my_command (char *arg, int from_tty)
{
create_breakpoint (..., arg, ...);
...
}
one now uses:
void
my_command (char *arg, int from_tty)
{
struct event_locaiton *location;
struct cleanup *back_to;
location = string_to_event_locaiton (&arg, ...);
back_to = make_cleanup_delete_event_location (location);
create_breakpoint (..., location, ...);
do_cleanups (back_to);
}
Linespec-decoding functions (now called location-decoding) such as
decode_line_full no longer skip argument pointers over processed input.
That functionality has been moved into string_to_event_location as
demonstrated above.
gdb/ChangeLog
* ax-gdb.c: Include location.h.
(agent_command_1) Use linespec location instead of address
string.
* break-catch-throw.c: Include location.h.
(re_set_exception_catchpoint): Use linespec locations instead
of address strings.
* breakpoint.c: Include location.h.
(create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, update_breakpoints_after_exec):
Use linespec location instead of address string.
(print_breakpoint_location): Use locations and
event_location_to_string.
Print extra_string for pending locations for non-MI streams.
(print_one_breakpoint_location): Use locations and
event_location_to_string.
(init_raw_breakpoint_without_location): Initialize b->location.
(create_thread_event_breakpoint): Use linespec location instead of
address string.
(init_breakpoint_sal): Likewise.
Only save extra_string if it is non-NULL and not the empty string.
Use event_location_to_string instead of `addr_string'.
Constify `p' and `endp'.
Use skip_spaces_const/skip_space_const instead of non-const versions.
Copy the location into the breakpoint.
If LOCATION is NULL, save the breakpoint address as a linespec location
instead of an address string.
(create_breakpoint_sal): Change `addr_string' parameter to a struct
event_location. All uses updated.
(create_breakpoints_sal): Likewise for local variable `addr_string'.
(parse_breakpoint_sals): Use locations instead of address strings.
Remove check for empty linespec with conditional.
Refactor.
(decode_static_tracepoint_spec): Make argument const and update
function.
(create_breakpoint): Change `arg' to a struct event_location and
rename.
Remove `copy_arg' and `addr_start'.
If EXTRA_STRING is empty, set it to NULL.
Don't populate `canonical' for pending breakpoints.
Pass `extra_string' to find_condition_and_thread.
Clear `extra_string' if `rest' was NULL.
Do not error with "garbage after location" if setting a dprintf
breakpoint.
Copy the location into the breakpoint instead of an address string.
(break_command_1): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Check against `arg_cp' for a probe linespec.
(dprintf_command): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Throw an exception if no format string was specified.
(print_recreate_ranged_breakpoint): Use event_location_to_string
instead of address strings.
(break_range_command, until_break_command)
(init_ada_exception_breakpoint): Use locations instead
of address strings.
(say_where): Print out extra_string for pending locations.
(base_breakpoint_dtor): Delete `location' and `location_range_end' of
the breakpoint.
(base_breakpoint_create_sals_from_location): Use struct event_location
instead of address string.
Remove `addr_start' and `copy_arg' parameters.
(base_breakpoint_decode_location): Use struct event_location instead of
address string.
(bkpt_re_set): Use locations instead of address strings.
Use event_location_empty_p to check for unset location.
(bkpt_print_recreate): Use event_location_to_string instead of
an address string.
Print out extra_string for pending locations.
(bkpt_create_sals_from_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location): Use struct event_location
instead of address string.
(bkpt_probe_decode_location): Use struct event_location instead of
address string.
(tracepoint_print_recreate): Use event_location_to_string to
recreate the tracepoint.
(tracepoint_create_sals_from_location, tracepoint_decode_location)
(tracepoint_probe_create_sals_from_location)
(tracepoint_probe_decode_location): Use struct event_location
instead of address string.
(dprintf_print_recreate): Use event_location_to_string to recreate
the dprintf.
(dprintf_re_set): Remove check for valid/missing format string.
(strace_marker_create_sals_from_location)
(strace_marker_create_breakpoints_sal, strace_marker_decode_location)
(update_static_tracepoint): Use struct event_location instead of
address string.
(location_to_sals): Likewise.
Pass `extra_string' to find_condition_and_thread.
For newly resolved pending breakpoint locations, clear the location's
string representation.
Assert that the breakpoint's condition string is NULL when
condition_not_parsed.
(breakpoint_re_set_default, create_sals_from_location_default)
(decode_location_default, trace_command, ftrace_command)
(strace_command, create_tracepoint_from_upload): Use locations
instead of address strings.
* breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
Use struct event_location instead of address string.
Update all uses.
<decode_location>: Likewise.
(struct breakpoint) <addr_string>: Change to struct event_location
and rename `location'.
<addr_string_range_end>: Change to struct event_location and rename
`location_range_end'.
(create_breakpoint): Use struct event_location instead of address
string.
* cli/cli-cmds.c: Include location.h.
(edit_command, list_command): Use locations instead of address strings.
* elfread.c: Include location.h.
(elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
* guile/scm-breakpoint.c: Include location.h.
(bpscm_print_breakpoint_smob): Use event_location_to_string.
(gdbscm_register_breakpoint): Use locations instead of address
strings.
* linespec.c: Include location.h.
(struct ls_parser) <stream>: Change to const char *.
(PARSER_STREAM): Update.
(lionespec_lexer_lex_keyword): According to find_condition_and_thread,
keywords must be followed by whitespace.
(canonicalize_linespec): Save a linespec location into `canonical'.
Save a canonical linespec into `canonical'.
(parse_linespec): Change `argptr' to const char * and rename `arg'.
All uses updated.
Update function description.
(linespec_parser_new): Initialize `parser'.
Update initialization of parsing stream.
(event_location_to_sals): New function.
(decode_line_full): Change `argptr' to a struct event_location and
rename it `location'.
Use locations instead of address strings.
Call event_location_to_sals instead of parse_linespec.
(decode_line_1): Likewise.
(decode_line_with_current_source, decode_line_with_last_displayed)
Use locations instead of address strings.
(decode_objc): Likewise.
Change `argptr' to const char * and rename `arg'.
(destroy_linespec_result): Delete the linespec result's location
instead of freeing the address string.
* linespec.h (struct linespec_result) <addr_string>: Change to
struct event_location and rename to ...
<location>: ... this.
(decode_line_1, decode_line_full): Change `argptr' to struct
event_location. All callers updated.
* mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
(mi_cmd_break_insert_1): Use locations instead of address strings.
Throw an error if there was "garbage" at the end of the specified
linespec.
* probe.c: Include location.h.
(parse_probes): Change `argptr' to struct event_location.
Use event locations instead of address strings.
* probe.h (parse_probes): Change `argptr' to struct event_location.
* python/py-breakpoint.c: Include location.h.
(bppy_get_location): Constify local variable `str'.
Use event_location_to_string.
(bppy_init): Use locations instead of address strings.
* python/py-finishbreakpoint.c: Include location.h.
(bpfinishpy_init): Remove local variable `addr_str'.
Use locations instead of address strings.
* python/python.c: Include location.h.
(gdbpy_decode_line): Use locations instead of address strings.
* remote.c: Include location.h.
(remote_download_tracepoint): Use locations instead of address
strings.
* spu-tdep.c: Include location.h.
(spu_catch_start): Remove local variable `buf'.
Use locations instead of address strings.
* tracepoint.c: Include location.h.
(scope_info): Use locations instead of address strings.
(encode_source_string): Constify parameter `src'.
* tracepoint.h (encode_source_string): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/dprintf-pending.exp: Update dprintf "without format"
test.
Add tests for missing ",FMT" and ",".
|
|
This patch adds the above-mentioned commands to the generic probe
abstraction implemented in probe.[ch]. The effects associated to
enabling or disabling a probe depend on the type of probe being
handled, and is triggered by invoking two back-end hooks in
`probe_ops'.
In case some particular probe type does not support the notion of
enabling and/or disabling, the corresponding fields on `probe_ops' can
be initialized to NULL. This is the case of SystemTap probes.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* stap-probe.c (stap_probe_ops): Add NULLs in the static
stap_probe_ops for `enable_probe' and `disable_probe'.
* probe.c (enable_probes_command): New function.
(disable_probes_command): Likewise.
(_initialize_probe): Define the cli commands `enable probe' and
`disable probe'.
(parse_probe_linespec): New function.
(info_probes_for_ops): Use parse_probe_linespec.
* probe.h (probe_ops): New hooks `enable_probe' and
`disable_probe'.
gdb/doc/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.texinfo (Static Probe Points): Cover the `enable probe' and
`disable probe' commands.
|
|
A "probe type" (backend for the probe abstraction implemented in
probe.[ch]) can extend the information printed by `info probes' by
defining additional columns. This means that when `info probes' is
used to print all the probes regardless of their types, some of the
columns will be "not applicable" to some of the probes (like, say, the
Semaphore column only makes sense for SystemTap probes). This patch
makes `info probes' fill these slots with "n/a" marks (currently it
breaks the table) and not include headers for which no actual probe
has been found in the list of defined probes.
This patch also adds support for a new generic column "Type", that
displays the type of each probe. SystemTap probes identify themselves
as "stap" probes.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* probe.c (print_ui_out_not_applicables): New function.
(exists_probe_with_pops): Likewise.
(info_probes_for_ops): Do not include column headers for probe
types for which no probe has been actually found on any object.
Also invoke `print_ui_out_not_applicables' in order to match the
column rows with the header when probes of several types are
listed.
Print the "Type" column.
* probe.h (probe_ops): Added a new probe operation `type_name'.
* stap-probe.c (stap_probe_ops): Add `stap_type_name'.
(stap_type_name): New function.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
This patch is a response to what I commented on:
<https://sourceware.org/ml/gdb-patches/2014-10/msg00046.html>
When reviewing Jose's USDT probe support patches. Basically, in his
patch he had to create dummy functions for the set_semaphore and the
clear_semaphore methods of probe_ops (gdb/probe.h), because those
functions were called inconditionally from inside gdb/breakpoint.c and
gdb/tracepoint.c. However, the semaphore concept may not apply to all
types of probes, and this is the case here: USDT probes do not have
semaphores (although SDT probes do).
Anyway, this is a simple (almost obvious) patch to guard the call to
{set,clear}_semaphore. It does not introduce any regression on a
Fedora 20 x86_64.
I will apply it in a few days in case there is no comment.
gdb/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* breakpoint.c (bkpt_probe_insert_location): Call set_semaphore
only if it is not NULL.
(bkpt_probe_remove_location): Likewise, for clear_semaphore.
* probe.h (struct probe_ops) <set_semaphore>: Update comment.
(struct probe_ops) <clear_semaphore>: Likewise.
* tracepoint.c (start_tracing): Call set_semaphore only if it is
not NULL.
(stop_tracing): Likewise, for clear_semaphore.
|
|
This constifies an argument to info_probes_for_ops.
2014-06-18 Tom Tromey <tromey@redhat.com>
* probe.c (info_probes_for_ops): Make "arg" const.
* probe.h (info_probes_for_ops): Update.
|
|
This changes the probes to be independent of the program space.
After this, when a probe's address is needed, it is determined by
applying offsets at the point of use.
This introduces a bound_probe object, similar to bound minimal
symbols. Objects of this type are used when it's necessary to pass a
probe and its corresponding objfile.
This removes the backlink from probe to objfile, which was primarily
used to fetch the architecture to use.
This adds a get_probe_address function which calls a probe method to
compute the probe's relocated address. Similarly, it adds an objfile
parameter to the semaphore methods so they can do the relocation
properly as well.
2014-03-03 Tom Tromey <tromey@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use bound probes.
* breakpoint.c (create_longjmp_master_breakpoint): Use
get_probe_address.
(add_location_to_breakpoint, bkpt_probe_insert_location)
(bkpt_probe_remove_location): Update.
* breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
* elfread.c (elf_symfile_relocate_probe): Remove.
(elf_probe_fns): Update.
(insert_exception_resume_breakpoint): Change type of "probe"
parameter to bound_probe.
(check_exception_resume): Update.
* objfiles.c (objfile_relocate1): Don't relocate probes.
* probe.c (bound_probe_s): New typedef.
(parse_probes): Use get_probe_address. Set sal's objfile.
(find_probe_by_pc): Return a bound_probe.
(collect_probes): Return a VEC(bound_probe_s).
(compare_probes): Update.
(gen_ui_out_table_header_info): Change type of "probes"
parameter. Update.
(info_probes_for_ops): Update.
(get_probe_address): New function.
(probe_safe_evaluate_at_pc): Update.
* probe.h (struct probe_ops) <get_probe_address>: New field.
<set_semaphore, clear_semaphore>: Add objfile parameter.
(struct probe) <objfile>: Remove field.
<arch>: New field.
<address>: Update comment.
(struct bound_probe): New.
(find_probe_by_pc): Return a bound_probe.
(get_probe_address): Declare.
* solib-svr4.c (struct probe_and_action) <address>: New field.
(hash_probe_and_action, equal_probe_and_action): Update.
(register_solib_event_probe): Add address parameter.
(solib_event_probe_at): Update.
(svr4_create_probe_breakpoints): Add objfile parameter. Use
get_probe_address.
* stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
(stap_get_probe_address): New function.
(stap_can_evaluate_probe_arguments, compute_probe_arg)
(compile_probe_arg): Update.
(stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
address.
(handle_stap_probe): Don't relocate the probe.
(stap_relocate): Remove.
(stap_gen_info_probes_table_values): Update.
(stap_probe_ops): Remove stap_relocate.
* symfile-debug.c (debug_sym_relocate_probe): Remove.
(debug_sym_probe_fns): Update.
* symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
* symtab.c (init_sal): Use memset.
* symtab.h (struct symtab_and_line) <objfile>: New field.
* tracepoint.c (start_tracing, stop_tracing): Update.
|
|
This fixes up a few mildly erroneous comments in probe.h.
2014-03-03 Tom Tromey <tromey@redhat.com>
* probe.h (parse_probes, find_probe_by_pc)
(find_probes_in_objfile): Fix comments.
|
|
|
|
This patch sanitizes the access to gdbarch made by various functions of
the SDT probe API. Before this patch, gdbarch was being accessed via
the probe's objfile; however, this proved to cause a bug on 32-bit ARM
targets because during the parsing of the probe's arguments the code
needed to access some pseudo-registers of the architecture, and this
information is not fully correct on the objfile's gdbarch.
Basically, the approach taken was to instead pass the current/selected
frame to the parsing and evaluation functions, so that they can extract
the gdbarch directly from the frame. It solved the ARM bug reported
above, and also contributed to make the API cleaner.
Tested on x86_64 and 32-bit ARM.
2013-12-11 Sergio Durigan Junior <sergiodj@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Pass selected frame
to get_probe_argument_count and evaluate_probe_argument.
* probe.c (get_probe_argument_count): Adjust declaration to accept
frame. Pass frame to probe_ops's get_probe_argument_count.
(evaluate_probe_argument): Likewise, for evaluate_probe_argument.
(probe_safe_evaluate_at_pc): Pass frame to
get_probe_argument_count and evaluate_probe_argument.
* probe.h (struct probe_ops) <get_probe_argument_count,
evaluate_probe_argument>: Adjust declarations to accept frame.
(get_probe_argument_count, evaluate_probe_argument): Likewise.
* solib-svr4.c (solib_event_probe_action): Get current frame.
Pass it to get_probe_argument_count.
(svr4_handle_solib_event): Get current frame. Pass it to
get_probe_argument_count and evaluate_probe_argument.
* stap-probe.c (stap_parse_probe_arguments): Adjust declaration to
accept gdbarch. Do not obtain it from the probe's objfile.
(stap_get_probe_argument_count): Adjust declaration to accept
frame. Obtain gdbarch from the frame. Call generic
can_evaluate_probe_arguments. Pass gdbarch to
stap_parse_probe_arguments.
(stap_get_arg): Adjust declaration to accept gdbarch. Pass it to
stap_parse_probe_arguments.
(stap_evaluate_probe_argument): Adjust declaration to accept
frame. Obtain gdbarch from the frame. Pass gdbarch to
stap_get_arg.
(stap_compile_to_ax): Pass agent_expr's gdbarch to stap_get_arg.
(compute_probe_arg): Obtain gdbarch from frame. Pass frame to
get_probe_argument_count and evaluate_probe_argument.
|
|
* breakpoint.c (create_longjmp_master_breakpoint): Check if probe
interface can evaluate arguments. Fallback to the old mode if it
cannot.
(create_exception_master_breakpoint): Likewise.
* elfread.c (elf_can_evaluate_probe_arguments): New function.
(struct sym_probe_fns elf_probe_fns): Export function above to the
probe interface.
* probe.c (can_evaluate_probe_arguments): New function.
* probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New
function pointer.
(can_evaluate_probe_arguments): New function prototype.
* solib-svr4.c (svr4_create_solib_event_breakpoints): Check if
probe interface can evaluate arguments. Fallback to the old mode
if it cannot.
* stap-probe.c (stap_get_probe_argument_count): Check if probe
interface can evaluate arguments. Warning the user if it cannot.
(stap_can_evaluate_probe_arguments): New function.
(struct probe_ops stap_probe_ops): Export function above to the
probe interface.
* symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>:
New function pointer.
|
|
* probe.h (get_probe_argument_count): New declaration.
(evaluate_probe_argument): Likewise.
* probe.c (get_probe_argument_count): New function.
(evaluate_probe_argument): Likewise.
(probe_safe_evaluate_at_pc): Use the above new functions.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
* common/gdb_vecs.c: New file, contents from utils.c.
* common/host-defs.h: New file, contents from defs.h.
* utils.h: New file, contents from defs.h.
* defs.h: Move all declarations of objects defined in utils.c
to utils.h (except QUIT() and related).
#include "utils.h", "host-defs.h".
* probe.h (probe_p): Move here from gdb_vecs.h.
* symfile.c: #include "probe.h" instead of "gdb_vecs.h".
* utils.c (free_char_ptr_vec): Moved to common/gdb_vecs.c.
(dirnames_to_char_ptr_vec_append, dirnames_to_char_ptr_vec): Ditto.
* Makefile.in (SFILES): Add common/gdb_vecs.c.
(HFILES_NO_SRCDIR): Add common/gdb_vecs.h, common/host-defs.h, utils.h.
(COMMON_OBS): Add gdb_vecs.o.
(gdb_vecs.o): New rule.
|
|
* elfread.c (elf_get_probe_argument_count): Remove `objfile' argument.
(elf_compile_to_ax): Likewise.
* infrun.c (insert_exception_resume_from_probe): Likewise.
(check_exception_resume): Remove `objfile' variable.
* probe.c (find_probe_by_pc): Remove `objfile' argument.
(struct probe_and_objfile, probe_and_objfile_s): Delete.
(collect_probes): Adjust return value to `VEC (probe_p) *'.
(compare_entries): Rename to...
(compare_probes): ...this. Adjust function to work with
`struct probe *'. Rename variables `ea' and `eb' to `pa' and `pb'
respectively.
(gen_ui_out_table_header_info): Adjust `probes' argument to be
`VEC (probe_p) *'.
(print_ui_out_info): Adjust argument to be `struct probe *'.
(info_probes_for_ops): Adjust internal computations to use
`VEC (probe_p) *'.
(probe_safe_evaluate_at_pc): Refactor to not pass `objfile' anymore.
* probe.h (struct probe_ops) <get_probe_argument_count, compile_to_ax,
gen_info_probes_table_values>: Remove `objfile' argument.
(struct probe) <objfile>: New field.
(find_probe_by_pc): Remove `objfile' argument.
* stap-probe.c (stap_parse_probe_arguments): Likewise.
(stap_get_probe_argument_count): Likewise.
(stap_get_arg): Likewise.
(stap_evaluate_probe_argument): Likewise.
(stap_compile_to_ax): Likewise.
(compile_probe_arg): Refactor not to pass `objfile' anymore.
(handle_stap_probe): Fill `objfile' field from `struct probe'.
(stap_gen_info_probes_table_header): Remove `objfile' argument.
* symfile.h (struct sym_probe_fns) <sym_evaluate_probe_argument,
sym_compile_to_ax>: Likewise.
|
|
Tom Tromey <tromey@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (SFILES): Add `probe' and `stap-probe'.
(COMMON_OBS): Likewise.
(HFILES_NO_SRCDIR): Add `probe'.
* NEWS: Mention support for static and SystemTap probes.
* amd64-tdep.c (amd64_init_abi): Initializing proper fields used by
SystemTap probes' arguments parser.
* arm-linux-tdep.c: Including headers needed to perform the parsing
of SystemTap probes' arguments.
(arm_stap_is_single_operand): New function.
(arm_stap_parse_special_token): Likewise.
(arm_linux_init_abi): Initializing proper fields used by SystemTap
probes' arguments parser.
* ax-gdb.c (require_rvalue): Removing static declaration.
(gen_expr): Likewise.
* ax-gdb.h (gen_expr): Declaring function.
(require_rvalue): Likewise.
* breakpoint.c: Include `gdb_regex.h' and `probe.h'.
(bkpt_probe_breakpoint_ops): New variable.
(momentary_breakpoint_from_master): Set the `probe' value.
(add_location_to_breakpoint): Likewise.
(break_command_1): Using proper breakpoint_ops according to the
argument passed by the user in the command line.
(bkpt_probe_insert_location): New function.
(bkpt_probe_remove_location): Likewise.
(bkpt_probe_create_sals_from_address): Likewise.
(bkpt_probe_decode_linespec): Likewise.
(tracepoint_probe_create_sals_from_address): Likewise.
(tracepoint_probe_decode_linespec): Likewise.
(tracepoint_probe_breakpoint_ops): New variable.
(trace_command): Using proper breakpoint_ops according to the
argument passed by the user in the command line.
(initialize_breakpoint_ops): Initializing breakpoint_ops for
static probes on breakpoints and tracepoints.
* breakpoint.h (struct bp_location) <probe>: New field.
* cli-utils.c (skip_spaces_const): New function.
(extract_arg): Likewise.
* cli-utils.h (skip_spaces_const): Likewise.
(extract_arg): Likewise.
* coffread.c (coff_sym_fns): Add `sym_probe_fns' value.
* configure.ac: Append `stap-probe.o' to be generated when ELF
support is present.
* configure: Regenerate.
* dbxread.c (aout_sym_fns): Add `sym_probe_fns' value.
* elfread.c: Include `probe.h' and `arch-utils.h'.
(probe_key): New variable.
(elf_get_probes): New function.
(elf_get_probe_argument_count): Likewise.
(elf_evaluate_probe_argument): Likewise.
(elf_compile_to_ax): Likewise.
(elf_symfile_relocate_probe): Likewise.
(stap_probe_key_free): Likewise.
(elf_probe_fns): New variable.
(elf_sym_fns): Add `sym_probe_fns' value.
(elf_sym_fns_lazy_psyms): Likewise.
(elf_sym_fns_gdb_index): Likewise.
(_initialize_elfread): Initialize objfile cache for static
probes.
* gdb_vecs.h (struct probe): New forward declaration.
(probe_p): New VEC declaration.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (stap_integer_prefix): New variable.
(stap_integer_suffix): Likewise.
(stap_register_prefix): Likewise.
(stap_register_suffix): Likewise.
(stap_register_indirection_prefix): Likewise.
(stap_register_indirection_suffix): Likewise.
(stap_gdb_register_prefix): Likewise.
(stap_gdb_register_suffix): Likewise.
(stap_is_single_operand): New function.
(stap_parse_special_token): Likewise.
(struct stap_parse_info): Forward declaration.
* i386-tdep.c: Including headers needed to perform the parsing
of SystemTap probes' arguments.
(i386_stap_is_single_operand): New function.
(i386_stap_parse_special_token): Likewise.
(i386_elf_init_abi): Initializing proper fields used by SystemTap
probes' arguments parser.
* i386-tdep.h (i386_stap_is_single_operand): New function.
(i386_stap_parse_special_token): Likewise.
* machoread.c (macho_sym_fns): Add `sym_probe_fns' value.
* mipsread.c (ecoff_sym_fns): Likewise.
* objfiles.c (objfile_relocate1): Support relocation for static
probes.
* parse.c (prefixify_expression): Remove static declaration.
(initialize_expout): Likewise.
(reallocate_expout): Likewise.
* parser-defs.h (initialize_expout): Declare function.
(reallocate_expout): Likewise.
(prefixify_expression): Likewise.
* ppc-linux-tdep.c: Including headers needed to perform the parsing
of SystemTap probes' arguments.
(ppc_stap_is_single_operand): New function.
(ppc_stap_parse_special_token): Likewise.
(ppc_linux_init_abi): Initializing proper fields used by SystemTap
probes' arguments parser.
* probe.c: New file, for generic statically defined probe support.
* probe.h: Likewise.
* s390-tdep.c: Including headers needed to perform the parsing of
SystemTap probes' arguments.
(s390_stap_is_single_operand): New function.
(s390_gdbarch_init): Initializing proper fields used by SystemTap
probes' arguments parser.
* somread.c (som_sym_fns): Add `sym_probe_fns' value.
* stap-probe.c: New file, for SystemTap probe support.
* stap-probe.h: Likewise.
* symfile.h: Include `gdb_vecs.h'.
(struct sym_probe_fns): New struct.
(struct sym_fns) <sym_probe_fns>: New field.
* symtab.c (init_sal): Initialize `probe' field.
* symtab.h (struct probe): Forward declaration.
(struct symtab_and_line) <probe>: New field.
* tracepoint.c (start_tracing): Adjust semaphore on breakpoints
locations.
(stop_tracing): Likewise.
* xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
|
