| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When printing void results without any format letter, they are output
as expected:
(gdb) p $abcd
$1 = void
(gdb) p (void)10
$2 = void
But if any format letter (besides s) is used, it always outputs zero:
(gdb) p/x $abcd
$3 = 0x0
(gdb) p/x (void)10
$4 = 0x0
So this adds void results to the types handled like unformatted prints.
gdb/ChangeLog:
2020-10-09 Hannes Domani <ssbssa@yahoo.de>
PR exp/26714
* printcmd.c (print_formatted): Handle void results as
unformatted prints.
gdb/testsuite/ChangeLog:
2020-10-09 Hannes Domani <ssbssa@yahoo.de>
PR exp/26714
* gdb.base/printcmds.exp: Add tests for void results.
|
|
PR symtab/25470 points out that the Zig programming language allows
integers of various bit sizes (including zero), not just sizes that
are a multiple of 8.
This is supported in DWARF by applying both a byte size and a
DW_AT_bit_size.
This patch adds support for this feature to integer and boolean types.
Other base types are not handled -- for floating-point types, this
didn't seem to make sense, and for character types I didn't see much
need. (These can be added later if desired.)
I've also added support for DW_AT_data_bit_offset at the same time. I
don't know whether the Zig compiler requires this, but it was
described in the same section in the DWARF standard and was easy to
add.
A new test case is supplied, using the DWARF assembler.
gdb/ChangeLog
2020-09-23 Tom Tromey <tom@tromey.com>
PR symtab/25470:
* value.c (unpack_long, pack_long, pack_unsigned_long): Handle bit
offset and bit size.
* printcmd.c (print_scalar_formatted): Handle zero-length
integer.
(print_scalar_formatted): Use bit_size_differs_p.
* gdbtypes.h (enum type_specific_kind) <TYPE_SPECIFIC_INT>: New
constant.
(union type_specific): <int_stuff>: New member.
(struct type) <bit_size_differs_p, bit_size, bit_offset>: New
methods.
* gdbtypes.c (init_integer_type, init_boolean_type): Initialize
TYPE_SPECIFIC_FIELD.
(recursive_dump_type, copy_type_recursive): Update.
* dwarf2/read.c (read_base_type): Handle DW_AT_bit_size and
DW_AT_data_bit_offset.
gdb/testsuite/ChangeLog
2020-09-23 Tom Tromey <tom@tromey.com>
* gdb.dwarf2/intbits.exp: New file.
* gdb.dwarf2/intbits.c: New file.
|
|
gdb/ChangeLog:
* gdbtypes.h (TYPE_UNSIGNED): Remove, replace all uses with
type::is_unsigned.
Change-Id: I84f76f5cd44ff7294e421d317376a9e476bc8666
|
|
Remove it in favor of using type::bounds directly.
gdb/ChangeLog:
* gdbtypes.h (TYPE_RANGE_DATA): Remove. Update callers to use
the type::bounds method directly.
Change-Id: Id4fab22af0a94cbf505f78b01b3ee5b3d682fba2
|
|
lookup_objfile_from_block mostly duplicates the functionality of
block_objfile, but in a less efficient way. This patch removes this
function and changes the callers to use block_objfile instead.
Tested by the buildbot.
gdb/ChangeLog
2020-05-15 Tom Tromey <tom@tromey.com>
* symtab.c (lookup_language_this, lookup_symbol_aux): Use
block_objfile.
(lookup_objfile_from_block): Remove.
(lookup_symbol_in_block, lookup_symbol_in_static_block)
(lookup_global_symbol): Use block_objfile.
* symtab.h (lookup_objfile_from_block): Don't declare.
* printcmd.c (clear_dangling_display_expressions): Use
block_objfile.
* parse.c (operator_check_standard): Use block_objfile.
|
|
Remove TYPE_CODE, changing all the call sites to use type::code
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use
type::code instead.
|
|
This changes displays to have a constructor, use bool and std::string,
and to be stored using std::vector. The ALL_DISPLAYS and
ALL_DISPLAYS_SAFE macros are removed. While internal iteration is
still done via map_display_numbers, this is updated to use a
function_view. These changes simplify the code somewhat; for example,
free_display can now be removed in favor of ordinary destruction.
gdb/ChangeLog
2020-05-08 Tom Tromey <tom@tromey.com>
* printcmd.c (struct display) <next>: Remove.
<display>: New constructor.
<exp_string>: Now a std::string.
<enabled_p>: Now a bool.
(display_number): Move definition earlier.
(displays): Rename from display_chain. Now a std::vector.
(ALL_DISPLAYS, ALL_DISPLAYS_SAFE): Remove.
(display_command): Update.
(do_one_display, disable_display)
(enable_disable_display_command, do_enable_disable_display):
Update.
(free_display): Remove.
(clear_displays): Rewrite.
(delete_display): Update.
(map_display_numbers): Use function_view. Remove "data"
parameter. Update.
(do_delete_display): Remove.
(undisplay_command): Update.
(do_one_display, do_displays, disable_display)
(info_display_command): Update.
(do_enable_disable_display): Remove.
(enable_disable_display_command)
(clear_dangling_display_expressions): Update.
|
|
This changes get_objfile_arch to be a new inline method,
objfile::arch.
To my surprise, this function came up while profiling DWARF psymbol
reading. Making this change improved performance from 1.986 seconds
to 1.869 seconds. Both measurements were done by taking the mean of
10 runs on a fixed copy of the gdb executable.
gdb/ChangeLog
2020-04-18 Tom Tromey <tom@tromey.com>
* xcoffread.c (enter_line_range, scan_xcoff_symtab): Update.
* value.c (value_fn_field): Update.
* valops.c (find_function_in_inferior)
(value_allocate_space_in_inferior): Update.
* tui/tui-winsource.c (tui_update_source_windows_with_line):
Update.
* tui/tui-source.c (tui_source_window::set_contents): Update.
* symtab.c (lookup_global_or_static_symbol)
(find_function_start_sal_1, skip_prologue_sal)
(print_msymbol_info, find_gnu_ifunc, symbol_arch): Update.
* symmisc.c (dump_msymbols, dump_symtab_1)
(maintenance_print_one_line_table): Update.
* symfile.c (init_entry_point_info, section_is_mapped)
(list_overlays_command, simple_read_overlay_table)
(simple_overlay_update_1): Update.
* stap-probe.c (handle_stap_probe): Update.
* stabsread.c (dbx_init_float_type, define_symbol)
(read_one_struct_field, read_enum_type, read_range_type): Update.
* source.c (info_line_command): Update.
* python/python.c (gdbpy_source_objfile_script)
(gdbpy_execute_objfile_script): Update.
* python/py-type.c (save_objfile_types): Update.
* python/py-objfile.c (py_free_objfile): Update.
* python/py-inferior.c (python_new_objfile): Update.
* psymtab.c (psym_find_pc_sect_compunit_symtab, dump_psymtab)
(dump_psymtab_addrmap_1, maintenance_info_psymtabs)
(maintenance_check_psymtabs): Update.
* printcmd.c (info_address_command): Update.
* objfiles.h (struct objfile) <arch>: New method, from
get_objfile_arch.
(get_objfile_arch): Don't declare.
* objfiles.c (get_objfile_arch): Remove.
(filter_overlapping_sections): Update.
* minsyms.c (msymbol_is_function): Update.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines)
(output_nondebug_symbol): Update.
* mdebugread.c (parse_symbol, basic_type, parse_partial_symbols)
(mdebug_expand_psymtab): Update.
* machoread.c (macho_add_oso_symfile): Update.
* linux-tdep.c (linux_infcall_mmap, linux_infcall_munmap):
Update.
* linux-fork.c (checkpoint_command): Update.
* linespec.c (convert_linespec_to_sals): Update.
* jit.c (finalize_symtab): Update.
* infrun.c (insert_exception_resume_from_probe): Update.
* ia64-tdep.c (ia64_find_unwind_table): Update.
* hppa-tdep.c (internalize_unwinds): Update.
* gdbtypes.c (get_type_arch, init_float_type, objfile_type):
Update.
* gcore.c (call_target_sbrk): Update.
* elfread.c (record_minimal_symbol, elf_symtab_read)
(elf_rel_plt_read, elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Update.
* dwarf2/read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(read_debug_names_from_section)
(process_psymtab_comp_unit_reader, add_partial_symbol)
(add_partial_subprogram, process_full_comp_unit)
(read_file_scope, read_func_scope, read_lexical_block_scope)
(read_call_site_scope, dwarf2_ranges_read)
(dwarf2_record_block_ranges, dwarf2_add_field)
(mark_common_block_symbol_computed, read_tag_pointer_type)
(read_tag_string_type, dwarf2_init_float_type)
(dwarf2_init_complex_target_type, read_base_type)
(partial_die_info::read, partial_die_info::read)
(read_attribute_value, dwarf_decode_lines_1, new_symbol)
(dwarf2_fetch_die_loc_sect_off): Update.
* dwarf2/loc.c (dwarf2_find_location_expression)
(class dwarf_evaluate_loc_desc, rw_pieced_value)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval)
(dwarf2_loc_desc_get_symbol_read_needs)
(locexpr_describe_location_piece, locexpr_describe_location_1)
(loclist_describe_location): Update.
* dwarf2/index-write.c (write_debug_names): Update.
* dwarf2/frame.c (dwarf2_build_frame_info): Update.
* dtrace-probe.c (dtrace_process_dof): Update.
* dbxread.c (read_dbx_symtab, dbx_end_psymtab)
(process_one_symbol): Update.
* ctfread.c (ctf_init_float_type, read_base_type): Update.
* coffread.c (coff_symtab_read, enter_linenos, decode_base_type)
(coff_read_enum_type): Update.
* cli/cli-cmds.c (edit_command, list_command): Update.
* buildsym.c (buildsym_compunit::finish_block_internal): Update.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, get_sal_arch): Update.
* block.c (block_gdbarch): Update.
* annotate.c (annotate_source_line): Update.
|
|
A couple of spots could be easily converted to use
value_print_scalar_formatted. This patch makes this change.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* printcmd.c (print_formatted): Use value_print_scalar_formatted.
* mips-tdep.c (mips_print_register): Use
value_print_scalar_formatted.
|
|
Back at:
commit 1f6f6e21fa86dc3411a6498608f32e9eb24b7851
Author: Philippe Waroquiers <philippe.waroquiers@skynet.be>
Date: Mon Jun 10 21:41:51 2019 +0200
Ensure GDB printf command can print convenience var strings without a target.
GDB was extended in order to allow the printing of convenience
variables that are strings without a target. However, this introduced
a regression that hasn't been caught by our testsuite (because there
were no tests for it).
The problem happens when we try to print a convenience variable that
holds the address of a string in the inferior. The following
two-liners can reproduce the issue:
$ echo -e 'int main(){const char a[]="test";return 0;}' | gcc -x c - -O0-g3
$ ./gdb/gdb --data-directory ./gdb/data-directory -q ./a.out -ex 'start' -ex 'set $x = (const char *) (&a[0] + 2)' -ex 'printf "%s\n", $x'
After some investigation, I found that the problem happens on
printcmd.c:printf_c_string. In the case above, we're taking the first
branch of the 'if' condition, which assumes that there will be a value
to be printed at "value_contents (value)". There isn't. We actually
need to obtain the address that the variable points to, and read the
contents from memory.
It seems to me that we should avoid this branch if the TYPE_CODE of
"value_type (value)" is TYPE_CODE_PTR (i.e., a pointer to the
inferior's memory). This is what this patch does.
I took the liberty to extend the current testcase under
gdb.base/printcmds.exp and create a test that exercises this scenario.
No regressions have been found on Buildbot.
gdb/ChangeLog:
2020-03-03 Sergio Durigan Junior <sergiodj@redhat.com>
* printcmd.c (print_c_string): Check also for TYPE_CODE_PTR
when verifying if dealing with a convenience variable.
gdb/testsuite/ChangeLog:
2020-03-03 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/printcmds.exp: Add test to verify printf of a
variable holding an address.
|
|
This removes ui_file_isatty, ui_file_read, ui_file_write,
ui_file_write_async_safe, ui_file_flush, and ui_file_puts, replacing
them with calls to the appropriate method instead.
gdb/ChangeLog
2020-02-11 Tom Tromey <tromey@adacore.com>
* remote.c (remote_console_output): Update.
* printcmd.c (printf_command): Update.
* event-loop.c (gdb_wait_for_event): Update.
* linux-nat.c (sigchld_handler): Update.
* remote-sim.c (gdb_os_write_stdout): Update.
(gdb_os_flush_stdout): Update.
(gdb_os_flush_stderr): Update.
(gdb_os_write_stderr): Update.
* exceptions.c (print_exception): Update.
* remote-fileio.c (remote_fileio_func_read): Update.
(remote_fileio_func_write): Update.
* tui/tui.c (tui_enable): Update.
* tui/tui-interp.c (tui_interp::init): Update.
* utils.c (init_page_info): Update.
(putchar_unfiltered, fputc_unfiltered): Update.
(gdb_flush): Update.
(emit_style_escape): Update.
(flush_wrap_buffer, fputs_maybe_filtered): Update.
* ui-file.c (ui_file_isatty, ui_file_read, ui_file_write)
(ui_file_write_async_safe, ui_file_flush, ui_file_puts): Remove.
(stderr_file::write): Update.
(stderr_file::puts): Update.
* ui-file.h (ui_file_isatty, ui_file_write)
(ui_file_write_async_safe, ui_file_read, ui_file_flush)
(ui_file_puts): Don't declare.
Change-Id: I3ca9b36e9107f6adbc41e014f5078b41d6bcec4d
|
|
This changes gdb_flush to also flush the internal wrap buffer. A few
places needed to continue using the previous approach, so this also
introduces ui_file_flush for those.
2020-02-05 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb/event-loop.c (gdb_wait_for_event): Update.
* gdb/printcmd.c (printf_command): Update.
* gdb/remote-fileio.c (remote_fileio_func_write): Update.
* gdb/remote-sim.c (gdb_os_flush_stdout): Update.
(gdb_os_flush_stderr): Update.
* gdb/remote.c (remote_console_output): Update.
* gdb/ui-file.c (gdb_flush): Rename to...
(ui_file_flush): ...this.
(stderr_file::write): Update.
(stderr_file::puts): Update.
* gdb/ui-file.h (gdb_flush): Rename to...
(ui_file_flush): ...this.
* gdb/utils.c (gdb_flush): Add function.
* gdb/utils.h (gdb_flush): Add declaration.
Change-Id: I7ca143d30f03dc39f218f6e880eb9bca9e15af39
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This removes the MULTI_OBJFILE_P macro in favor of a method on the
program space.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.c (program_space::multi_objfile_p): New method.
* printcmd.c (info_symbol_command): Update.
* maint.c (maintenance_translate_address): Update.
* objfiles.h (MULTI_OBJFILE_P): Remove.
* progspace.h (struct program_space) <multi_objfile_p>: New
method.
Change-Id: I2779e26ea8909078d63fea8f13bce94cab73948c
|
|
The option framework documentation was speaking about a 'print -raw'
option, but this option does not exist.
This patch implements -raw-values option that tells to ignore the
active pretty printers when printing a value.
As we already have -raw-frame-arguments, I thought -raw-values
was more clear, in particular to differentiate
set print raw-values and set print raw-frame-arguments.
gdb/doc/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Options): Use -p and -pretty in the example,
as -r is ambiguous. Update the print - TAB TAB completion result.
(Data): Document new option -raw-values. Use -p and -pretty in the
example, as -r is ambiguous.
(Print Settings): Document set print raw values.
(Pretty-Printer Commands): Document interaction between enabled
pretty printers and -raw-values/-raw-frame-arguments.
gdb/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Document -raw-values option and the related setting commands.
* printcmd.c (print_command_parse_format): Do not set opts->raw off,
only set it on when /r is given.
* valprint.c (value_print_option_defs): New element raw-values.
* Makefile.in: Add the new file.
gdb/testsuite/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/options.exp: Add -raw-values in the print completion list.
* gdb.python/py-prettyprint.exp: Add tests for -raw-values.
|
|
I noticed that the gdbarch parameter of lookup_typename was unused, so I
removed it (as well as from lookup_signed_typename and
lookup_unsigned_typename) and updated all callers.
Tested by rebuilding.
gdb/ChangeLog:
* c-exp.y: Update calls to lookup_typename,
lookup_signed_typename and lookup_unsigned_typename.
* c-lang.c (evaluate_subexp_c): Likewise.
* cp-namespace.c (cp_lookup_symbol_imports_or_template):
Likewise.
* eval.c (binop_promote): Likewise.
* gdbtypes.c (lookup_typename): Remove gdbarch parameter.
(lookup_unsigned_typename): Likewise.
(lookup_signed_typename): Likewise.
* gdbtypes.h (lookup_unsigned_typename): Likewise.
(lookup_signed_typename): Likewise.
(lookup_typename): Likewise.
* guile/scm-type.c (tyscm_lookup_typename): Update calls to
lookup_typename, lookup_signed_typename,
lookup_unsigned_typename.
* m2-exp.y: Likewise.
* printcmd.c (printf_wide_c_string): Likewise.
(ui_printf): Likewise.
* python/py-type.c (typy_lookup_typename): Likewise.
* python/py-xmethods.c (python_xmethod_worker::invoke):
Likewise.
* rust-exp.y: Likewise.
|
|
Similar to the MSYMBOL version of this patch, improves readability
and will eventually allow making name private.
gdb/ChangeLog:
2019-11-22 Christian Biesinger <cbiesinger@google.com>
* ada-exp.y: Update.
* ada-lang.c (sort_choices): Update.
(ada_print_symbol_signature): Update.
(resolve_subexp): Update.
(ada_parse_renaming): Update.
(ada_read_renaming_var_value): Update.
(lesseq_defined_than): Update.
(remove_extra_symbols): Update.
(remove_irrelevant_renamings): Update.
(ada_add_block_symbols): Update.
(ada_collect_symbol_completion_matches): Update.
(ada_is_renaming_symbol): Update.
(aggregate_assign_from_choices): Update.
(ada_evaluate_subexp): Update.
(ada_has_this_exception_support): Update.
(ada_is_non_standard_exception_sym): Update.
(ada_add_exceptions_from_frame): Update.
(ada_add_global_exceptions): Update.
(ada_print_subexp): Update.
* ax-gdb.c (gen_var_ref): Update.
(gen_maybe_namespace_elt): Update.
(gen_expr_for_cast): Update.
(gen_expr): Update.
* block.h: Update.
* blockframe.c (find_pc_partial_function): Update.
* breakpoint.c (print_breakpoint_location): Update.
(update_static_tracepoint): Update.
* btrace.c (ftrace_print_function_name): Update.
(ftrace_function_switched): Update.
* buildsym.c (find_symbol_in_list): Update.
* c-exp.y: Update.
* c-typeprint.c (c_print_typedef): Update.
(c_type_print_template_args): Update.
* cli/cli-cmds.c (edit_command): Update.
(list_command): Update.
(print_sal_location): Update.
* coffread.c (patch_opaque_types): Update.
(process_coff_symbol): Update.
(coff_read_enum_type): Update.
* compile/compile-c-symbols.c (c_symbol_substitution_name): Update.
(convert_one_symbol): Update.
(hash_symname): Update.
(eq_symname): Update.
* compile/compile-cplus-symbols.c (convert_one_symbol): Update.
* compile/compile-cplus-types.c (debug_print_scope): Update.
* compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update.
* compile/compile-object-load.c (get_out_value_type): Update.
* cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
(search_symbol_list): Update.
(cp_lookup_symbol_imports_or_template): Update.
* cp-support.c (overload_list_add_symbol): Update.
* ctfread.c (psymtab_to_symtab): Update.
* dbxread.c (cp_set_block_scope): Update.
* dictionary.c (iter_match_first_hashed): Update.
(iter_match_next_hashed): Update.
(insert_symbol_hashed): Update.
(iter_match_next_linear): Update.
* dictionary.h: Update.
* dwarf2loc.c (func_get_frame_base_dwarf_block): Update.
(locexpr_describe_location_piece): Update.
(locexpr_describe_location_1): Update.
(locexpr_generate_c_location): Update.
(loclist_describe_location): Update.
(loclist_generate_c_location): Update.
* dwarf2read.c (dw2_debug_names_lookup_symbol): Update.
(read_func_scope): Update.
(process_enumeration_scope): Update.
(new_symbol): Update.
(dwarf2_const_value): Update.
(dwarf2_symbol_mark_computed): Update.
* eval.c (evaluate_funcall): Update.
(evaluate_subexp_standard): Update.
* expprint.c (print_subexp_standard): Update.
(dump_subexp_body_standard): Update.
* f-valprint.c (info_common_command_for_block): Update.
* findvar.c (get_hosting_frame): Update.
(default_read_var_value): Update.
* go-lang.c (go_symbol_package_name): Update.
* guile/scm-block.c (bkscm_print_block_smob): Update.
* guile/scm-symbol.c (syscm_print_symbol_smob): Update.
(gdbscm_symbol_name): Update.
(gdbscm_symbol_linkage_name): Update.
(gdbscm_symbol_print_name): Update.
* infcall.c (get_function_name): Update.
* infcmd.c (jump_command): Update.
(finish_command): Update.
* infrun.c (insert_exception_resume_breakpoint): Update.
* linespec.c (canonicalize_linespec): Update.
(create_sals_line_offset): Update.
(convert_linespec_to_sals): Update.
(complete_label): Update.
(find_label_symbols_in_block): Update.
* m2-typeprint.c (m2_print_typedef): Update.
* mdebugread.c (mdebug_reg_to_regnum): Update.
(parse_symbol): Update.
(mylookup_symbol): Update.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
(list_args_or_locals): Update.
* objc-lang.c (compare_selectors): Update.
(info_selectors_command): Update.
(compare_classes): Update.
(info_classes_command): Update.
(find_imps): Update.
* p-typeprint.c (pascal_print_typedef): Update.
* printcmd.c (build_address_symbolic): Update.
(info_address_command): Update.
(print_variable_and_value): Update.
* python/py-framefilter.c (extract_sym): Update.
(py_print_single_arg): Update.
* python/py-symbol.c (sympy_str): Update.
(sympy_get_name): Update.
(sympy_get_linkage_name): Update.
* python/python.c (gdbpy_rbreak): Update.
* record-btrace.c (btrace_get_bfun_name): Update.
(btrace_call_history): Update.
* rust-lang.c (rust_print_typedef): Update.
* solib-frv.c (frv_fdpic_find_canonical_descriptor): Update.
* stabsread.c (stab_reg_to_regnum): Update.
(define_symbol): Update.
(read_enum_type): Update.
(common_block_end): Update.
(cleanup_undefined_types_1): Update.
(scan_file_globals): Update.
* stack.c (print_frame_arg): Update.
(print_frame_args): Update.
(find_frame_funname): Update.
(info_frame_command_core): Update.
(iterate_over_block_locals): Update.
(print_block_frame_labels): Update.
(do_print_variable_and_value): Update.
(iterate_over_block_arg_vars): Update.
(return_command): Update.
* symmisc.c (dump_symtab_1): Update.
(print_symbol): Update.
* symtab.c (eq_symbol_entry): Update.
(symbol_cache_dump): Update.
(lookup_language_this): Update.
(find_pc_sect_line): Update.
(skip_prologue_sal): Update.
(symbol_search::compare_search_syms): Update.
(treg_matches_sym_type_name): Update.
(search_symbols): Update.
(print_symbol_info): Update.
(rbreak_command): Update.
(completion_list_add_symbol): Update.
(find_gnu_ifunc): Update.
(get_symbol_address): Update.
(search_module_symbols): Update.
(info_module_subcommand): Update.
* symtab.h (SYMBOL_NATURAL_NAME): Remove.
(SYMBOL_LINKAGE_NAME): Remove.
(SYMBOL_DEMANGLED_NAME): Remove.
(SYMBOL_PRINT_NAME): Remove.
(SYMBOL_SEARCH_NAME): Remove.
* tracepoint.c (set_traceframe_context): Update.
(validate_actionline): Update.
(collection_list::collect_symbol): Update.
(encode_actions_1): Update.
(info_scope_command): Update.
(print_one_static_tracepoint_marker): Update.
* typeprint.c (typedef_hash_table::add_template_parameters): Update.
* valops.c (address_of_variable): Update.
(find_overload_match): Update.
(find_oload_champ): Update.
Change-Id: I76bdc8b44eea6876bf03af9d351f8e90cc0154b2
|
|
Improves readability. In the future, it will also allow making the name
private, once the name setter functions become member functions.
gdb/ChangeLog:
2019-11-22 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_lookup_simple_minsym): Update.
(ada_collect_symbol_completion_matches): Update.
* ada-tasks.c (read_atcb): Update.
* amd64-windows-tdep.c (amd64_skip_main_prologue): Update.
(amd64_windows_skip_trampoline_code): Update.
* arm-tdep.c (skip_prologue_function): Update.
(arm_skip_stack_protector): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
(arm_wince_skip_main_prologue): Update.
* ax-gdb.c (gen_expr): Update.
* block.c (call_site_for_pc): Update.
* blockframe.c (find_pc_partial_function): Update.
* breakpoint.c (set_breakpoint_location_function): Update.
* btrace.c (ftrace_print_function_name): Update.
(ftrace_function_switched): Update.
* c-valprint.c (print_unpacked_pointer): Update.
* coffread.c (coff_symfile_read): Update.
* compile/compile-c-symbols.c (convert_symbol_bmsym): Update.
* compile/compile-cplus-symbols.c (convert_symbol_bmsym): Update.
* dwarf-index-write.c (write_psymbols): Update.
* dwarf2loc.c (call_site_to_target_addr): Update.
(func_verify_no_selftailcall): Update.
(tailcall_dump): Update.
(call_site_find_chain_1): Update.
(dwarf_expr_reg_to_entry_parameter): Update.
* elfread.c (elf_gnu_ifunc_record_cache): Update.
* eval.c (evaluate_funcall): Update.
(evaluate_subexp_standard): Update.
(evaluate_subexp_for_sizeof): Update.
* expprint.c (print_subexp_standard): Update.
(dump_subexp_body_standard): Update.
* frame.c (get_prev_frame_always_1): Update.
* frv-tdep.c (frv_skip_main_prologue): Update.
* gnu-v2-abi.c (gnuv2_value_rtti_type): Update.
* gnu-v3-abi.c (gnuv3_rtti_type): Update.
(gnuv3_get_typename_from_type_info): Update.
(gnuv3_skip_trampoline): Update.
* hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Update.
* i386-tdep.c (i386_skip_main_prologue): Update.
(i386_pe_skip_trampoline_code): Update.
* ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update.
* infcall.c (get_function_name): Update.
* linespec.c (minsym_found): Update.
* linux-fork.c (info_checkpoints_command): Update.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
(m32c_m16c_pointer_to_address): Update.
* maint.c (maintenance_translate_address): Update.
* minsyms.c (add_minsym_to_hash_table): Update.
(add_minsym_to_demangled_hash_table): Update.
(lookup_minimal_symbol_mangled): Update.
(lookup_minimal_symbol_demangled): Update.
(lookup_minimal_symbol_linkage): Update.
(lookup_minimal_symbol_text): Update.
(lookup_minimal_symbol_by_pc_name): Update.
(minimal_symbol_is_less_than): Update.
(compact_minimal_symbols): Update.
(build_minimal_symbol_hash_tables): Update.
(find_solib_trampoline_target): Update.
* mips-tdep.c (mips_stub_frame_sniffer): Update.
(mips_skip_pic_trampoline_code): Update.
* msp430-tdep.c (msp430_skip_trampoline_code): Update.
* objc-lang.c (info_selectors_command): Update.
(info_classes_command): Update.
(find_methods): Update.
(find_imps): Update.
* p-valprint.c (pascal_val_print): Update.
* ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code): Update.
* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
* printcmd.c (build_address_symbolic): Update.
(info_symbol_command): Update.
* psymtab.c (psymbol_name_matches): Update.
(match_partial_symbol): Update.
(lookup_partial_symbol): Update.
(print_partial_symbols): Update.
(sort_pst_symbols): Update.
(maintenance_check_psymtabs): Update.
* python/py-framefilter.c (py_print_frame): Update.
* python/python.c (gdbpy_rbreak): Update.
* record-btrace.c (btrace_get_bfun_name): Update.
(btrace_call_history): Update.
* rs6000-tdep.c (rs6000_skip_main_prologue): Update.
(rs6000_skip_trampoline_code): Update.
* sol-thread.c (info_cb): Update.
* stabsread.c (scan_file_globals): Update.
* stack.c (find_frame_funname): Update.
(info_frame_command_core): Update.
* symmisc.c (dump_msymbols): Update.
* symtab.c (symbol_natural_name): Rename to..,
(general_symbol_info::natural_name): ...this.
(symbol_demangled_name): Rename to...
(general_symbol_info::demangled_name): ...this.
(symbol_search_name): Rename to...
(general_symbol_info::search_name): ...this.
(symbol_matches_search_name): Update.
(find_pc_sect_line): Update.
(skip_prologue_sal): Update.
(search_symbols): Update.
(print_msymbol_info): Update.
(rbreak_command): Update.
(completion_list_add_msymbol): Update.
(completion_list_objc_symbol): Update.
(get_msymbol_address): Update.
* symtab.h (struct general_symbol_info): Add member functions
natural_name (), linkage_name (), print_name (), demangled_name (),
and search_name ().
(SYMBOL_NATURAL_NAME): Update.
(symbol_natural_name): Move to a member function on general_symbol_info.
(SYMBOL_DEMANGLED_NAME): Update.
(symbol_demangled_name): Move to a member function on
general_symbol_info.
(SYMBOL_SEARCH_NAME): Update.
(symbol_search_name): Move to a member function on general_symbol_info.
(MSYMBOL_NATURAL_NAME): Remove.
(MSYMBOL_LINKAGE_NAME): Remove.
(MSYMBOL_PRINT_NAME): Remove.
(MSYMBOL_DEMANGLED_NAME): Remove.
(MSYMBOL_SEARCH_NAME): Remove.
* x86-tdep.c (x86_in_indirect_branch_thunk): Update.
Change-Id: I65aa529843a9903e174ce799037e41f954a9fcee
|
|
- Rationale:
It is possible for compilers to indicate the desired byte order
interpretation of scalar variables using the DWARF attribute:
DW_AT_endianity
A type flagged with this variable would typically use one of:
DW_END_big
DW_END_little
which instructs the debugger what the desired byte order interpretation
of the variable should be.
The GCC compiler (as of V6) has a mechanism for setting the desired byte
ordering of the fields within a structure or union. For, example, on a
little endian target, a structure declared as:
struct big {
int v;
short a[4];
} __attribute__( ( scalar_storage_order( "big-endian" ) ) );
could be used to ensure all the structure members have a big-endian
interpretation (the compiler would automatically insert byte swap
instructions before and after respective store and load instructions).
- To reproduce
GCC V8 is required to correctly emit DW_AT_endianity DWARF attributes
in all situations when the scalar_storage_order attribute is used.
A fix for (dwarf endianity instrumentation) for GCC V6-V7 can be found
in the URL field of the following PR:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82509
- Test-case:
A new test case (testsuite/gdb.base/endianity.*) is included with this
patch.
Manual testing for mixed endianity code has also been done with GCC V8.
See:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82509#c4
- Observed vs. expected:
Without this change, using scalar_storage_order that doesn't match the
target, such as
struct otherendian
{
int v;
} __attribute__( ( scalar_storage_order( "big-endian" ) ) );
would behave like the following on a little endian target:
Breakpoint 1 at 0x401135: file endianity.c, line 41.
(gdb) run
Starting program: /home/pjoot/freeware/t/a.out
Missing separate debuginfos, use: debuginfo-install glibc-2.17-292.el7.x86_64
Breakpoint 1, main () at endianity.c:41
41 struct otherendian o = {3};
(gdb) n
43 do_nothing (&o); /* START */
(gdb) p o
$1 = {v = 50331648}
(gdb) p /x
$2 = {v = 0x3000000}
whereas with this gdb enhancement we can access the variable with the user
specified endianity:
Breakpoint 1, main () at endianity.c:41
41 struct otherendian o = {3};
(gdb) p o
$1 = {v = 0}
(gdb) n
43 do_nothing (&o); /* START */
(gdb) p o
$2 = {v = 3}
(gdb) p o.v = 4
$3 = 4
(gdb) p o.v
$4 = 4
(gdb) x/4xb &o.v
0x7fffffffd90c: 0x00 0x00 0x00 0x04
(observe that the 4 byte int variable has a big endian representation in the
hex dump.)
gdb/ChangeLog
2019-11-21 Peeter Joot <peeter.joot@lzlabs.com>
Byte reverse display of variables with DW_END_big, DW_END_little
(DW_AT_endianity) dwarf attributes if different than the native
byte order.
* ada-lang.c (ada_value_binop):
Use type_byte_order instead of gdbarch_byte_order.
* ada-valprint.c (printstr):
(ada_val_print_string):
* ada-lang.c (value_pointer):
(ada_value_binop):
Use type_byte_order instead of gdbarch_byte_order.
* c-lang.c (c_get_string):
Use type_byte_order instead of gdbarch_byte_order.
* c-valprint.c (c_val_print_array):
Use type_byte_order instead of gdbarch_byte_order.
* cp-valprint.c (cp_print_class_member):
Use type_byte_order instead of gdbarch_byte_order.
* dwarf2loc.c (rw_pieced_value):
Use type_byte_order instead of gdbarch_byte_order.
* dwarf2read.c (read_base_type): Handle DW_END_big,
DW_END_little
* f-lang.c (f_get_encoding):
Use type_byte_order instead of gdbarch_byte_order.
* findvar.c (default_read_var_value):
Use type_byte_order instead of gdbarch_byte_order.
* gdbtypes.c (check_types_equal):
Require matching TYPE_ENDIANITY_NOT_DEFAULT if set.
(recursive_dump_type): Print TYPE_ENDIANITY_BIG,
and TYPE_ENDIANITY_LITTLE if set.
(type_byte_order): new function.
* gdbtypes.h (TYPE_ENDIANITY_NOT_DEFAULT): New macro.
(struct main_type) <flag_endianity_not_default>:
New field.
(type_byte_order): New function.
* infcmd.c (default_print_one_register_info):
Use type_byte_order instead of gdbarch_byte_order.
* p-lang.c (pascal_printstr):
Use type_byte_order instead of gdbarch_byte_order.
* p-valprint.c (pascal_val_print):
Use type_byte_order instead of gdbarch_byte_order.
* printcmd.c (print_scalar_formatted):
Use type_byte_order instead of gdbarch_byte_order.
* solib-darwin.c (darwin_current_sos):
Use type_byte_order instead of gdbarch_byte_order.
* solib-svr4.c (solib_svr4_r_ldsomap):
Use type_byte_order instead of gdbarch_byte_order.
* stap-probe.c (stap_modify_semaphore):
Use type_byte_order instead of gdbarch_byte_order.
* target-float.c (target_float_same_format_p):
Use type_byte_order instead of gdbarch_byte_order.
* valarith.c (scalar_binop):
(value_bit_index):
Use type_byte_order instead of gdbarch_byte_order.
* valops.c (value_cast):
Use type_byte_order instead of gdbarch_byte_order.
* valprint.c (generic_emit_char):
(generic_printstr):
(val_print_string):
Use type_byte_order instead of gdbarch_byte_order.
* value.c (unpack_long):
(unpack_bits_as_long):
(unpack_value_bitfield):
(modify_field):
(pack_long):
(pack_unsigned_long):
Use type_byte_order instead of gdbarch_byte_order.
* findvar.c (unsigned_pointer_to_address):
(signed_pointer_to_address):
(unsigned_address_to_pointer):
(address_to_signed_pointer):
(default_read_var_value):
(default_value_from_register):
Use type_byte_order instead of gdbarch_byte_order.
* gnu-v3-abi.c (gnuv3_make_method_ptr):
Use type_byte_order instead of gdbarch_byte_order.
* riscv-tdep.c (riscv_print_one_register_info):
Use type_byte_order instead of gdbarch_byte_order.
gdb/testsuite/ChangeLog
2019-11-21 Peeter Joot <peeter.joot@lzlabs.com>
* gdb.base/endianity.c: New test.
* gdb.base/endianity.exp: New file.
Change-Id: I4bd98c1b4508c2d7c5a5dbb15d7b7b1cb4e667e2
|
|
The gdb format mechanism doesn't currently support the 'z' size
modifier, there are a few places in GDB where this is used. Instead
of removing these uses lets just add support to GDB for using 'z'.
I found this issue when trying to use some of the debug output.
Before this commit:
(gdb) set debug dwarf-line 9
(gdb) file test
Reading symbols from test...
Unrecognized format specifier 'z' in printf
(No debugging symbols found in test)
(gdb)
After this commit:
(gdb) set debug dwarf-line 9
(gdb) file test
Reading symbols from test...
Adding dir 1: /usr/include
Adding file 1: test.c
Adding file 2: stdc-predef.h
Processing actual line 3: file 1, address 0x4004a0, is_stmt 1, discrim 0
Processing actual line 4: file 1, address 0x4004a0, is_stmt 1, discrim 0
.... lots of debug output ...
Processing actual line 10: file 1, address 0x4003b7, is_stmt 0, discrim 0
(gdb)
I've added a self test to cover the integer format size modifiers,
including the 'z' modifier.
gdb/ChangeLog:
* gdbsupport/format.c (format_pieces::format_pieces): Support
printf 'z' size modifier.
* gdbsupport/format.h (enum argclass): Add size_t_arg.
* printcmd.c (ui_printf): Handle size_t_arg.
* ui-out.c (ui_out::vmessage): Likewise.
* unittests/format_pieces-selftests.c (test_format_int_sizes): New
function.
(run_tests): Call test_format_int_sizes.
gdb/gdbserver/ChangeLog:
* ax.c (ax_printf): Handle size_t_arg.
Change-Id: Ib6c44d88aa5bce265d757e4c0698881803dd186f
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-18 Tom de Vries <tdevries@suse.de>
* aarch64-tdep.c: Fix typos in comments.
* ada-lang.c: Same.
* ada-tasks.c: Same.
* alpha-tdep.c: Same.
* alpha-tdep.h: Same.
* amd64-nat.c: Same.
* amd64-windows-tdep.c: Same.
* arc-tdep.c: Same.
* arc-tdep.h: Same.
* arch-utils.c: Same.
* arm-nbsd-tdep.c: Same.
* arm-tdep.c: Same.
* ax-gdb.c: Same.
* blockframe.c: Same.
* btrace.c: Same.
* c-varobj.c: Same.
* coff-pe-read.c: Same.
* coffread.c: Same.
* cris-tdep.c: Same.
* darwin-nat.c: Same.
* dbxread.c: Same.
* dcache.c: Same.
* disasm.c: Same.
* dtrace-probe.c: Same.
* dwarf-index-write.c: Same.
* dwarf2-frame-tailcall.c: Same.
* dwarf2-frame.c: Same.
* dwarf2read.c: Same.
* eval.c: Same.
* exceptions.c: Same.
* fbsd-tdep.c: Same.
* findvar.c: Same.
* frame.c: Same.
* frv-tdep.c: Same.
* gnu-v3-abi.c: Same.
* go32-nat.c: Same.
* h8300-tdep.c: Same.
* hppa-tdep.c: Same.
* i386-linux-tdep.c: Same.
* i386-tdep.c: Same.
* ia64-libunwind-tdep.c: Same.
* ia64-tdep.c: Same.
* infcmd.c: Same.
* infrun.c: Same.
* linespec.c: Same.
* linux-nat.c: Same.
* linux-thread-db.c: Same.
* machoread.c: Same.
* mdebugread.c: Same.
* mep-tdep.c: Same.
* mn10300-tdep.c: Same.
* namespace.c: Same.
* objfiles.c: Same.
* opencl-lang.c: Same.
* or1k-tdep.c: Same.
* osabi.c: Same.
* ppc-linux-nat.c: Same.
* ppc-linux-tdep.c: Same.
* ppc-sysv-tdep.c: Same.
* printcmd.c: Same.
* procfs.c: Same.
* record-btrace.c: Same.
* record-full.c: Same.
* remote-fileio.c: Same.
* remote.c: Same.
* rs6000-tdep.c: Same.
* s12z-tdep.c: Same.
* score-tdep.c: Same.
* ser-base.c: Same.
* ser-go32.c: Same.
* skip.c: Same.
* sol-thread.c: Same.
* solib-svr4.c: Same.
* solib.c: Same.
* source.c: Same.
* sparc-nat.c: Same.
* sparc-sol2-tdep.c: Same.
* sparc-tdep.c: Same.
* sparc64-tdep.c: Same.
* stabsread.c: Same.
* stack.c: Same.
* symfile.c: Same.
* symtab.c: Same.
* target-descriptions.c: Same.
* target-float.c: Same.
* thread.c: Same.
* utils.c: Same.
* valops.c: Same.
* valprint.c: Same.
* value.c: Same.
* varobj.c: Same.
* windows-nat.c: Same.
* xcoffread.c: Same.
* xstormy16-tdep.c: Same.
* xtensa-tdep.c: Same.
Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4
|
|
This introduces a new "metadata" style and changes many places in gdb
to use it. The idea here is to let the user distinguish gdb output
from output that (conceptually at least) comes directly from the
inferior. The newly-styled category includes text that gdb
traditionally surrounds in "<...>", like "<unavailable>".
I only added a single test for this. In many cases this output is
difficult to test. Also, while developing this errors in the
implementation of the new printf formats showed up as regressions.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* p-lang.c (pascal_printstr): Use metadata style.
* value.c (show_convenience): Use metadata style.
* valprint.c (valprint_check_validity, val_print_optimized_out)
(val_print_not_saved, val_print_unavailable)
(val_print_invalid_address, generic_val_print, val_print)
(value_check_printable, val_print_array_elements): Use metadata
style.
* ui-out.h (class ui_out) <field_fmt>: New overload.
<do_field_fmt>: Add style parameter.
* ui-out.c (ui_out::field_fmt): New overload.
* typeprint.c (type_print_unknown_return_type)
(val_print_not_allocated, val_print_not_associated): Use metadata
style.
* tui/tui-out.h (class tui_ui_out) <do_field_fmt>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_fmt): Update.
* tracepoint.c (tvariables_info_1): Use metadata style.
* stack.c (print_frame_arg, print_frame_info, print_frame)
(info_frame_command_core): Use metadata style.
* skip.c (info_skip_command): Use metadata style.
* rust-lang.c (rust_print_enum): Use metadata style.
* python/py-prettyprint.c (print_stack_unless_memory_error): Use
metadata style.
* python/py-framefilter.c (py_print_single_arg): Use metadata
style.
* printcmd.c (do_one_display, print_variable_and_value): Use
metadata style.
* p-valprint.c (pascal_val_print)
(pascal_object_print_value_fields): Use metadata style.
* p-typeprint.c (pascal_type_print_base): Use metadata style.
* mi/mi-out.h (class mi_ui_out) <do_field_fmt>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_field_fmt): Update.
* m2-valprint.c (m2_print_long_set): Use metadata style.
* m2-typeprint.c (m2_print_type): Use metadata style.
* infcmd.c (print_return_value_1): Use metadata style.
* gnu-v3-abi.c (print_one_vtable): Use metadata style.
* f-valprint.c (info_common_command_for_block): Use metadata
style.
* f-typeprint.c (f_type_print_base): Use metadata style.
* expprint.c (print_subexp_standard): Use metadata style.
* cp-valprint.c (cp_print_value_fields): Use metadata style.
* cli/cli-style.h (class cli_style_option): Add constructor.
(metadata_style): Declare.
* cli/cli-style.c (metadata_style): New global.
(_initialize_cli_style): Register metadata style.
* cli-out.h (class cli_ui_out) <do_field_fmt>: Add style
parameter.
* cli-out.c (cli_ui_out::do_field_fmt): Update.
* c-typeprint.c (c_type_print_base_struct_union)
(c_type_print_base_1): Use metadata style.
* breakpoint.c (watchpoint_value_print)
(print_one_breakpoint_location): Use metadata style.
* break-catch-syscall.c (print_one_catch_syscall): Use metadata
style.
* break-catch-sig.c (signal_catchpoint_print_one): Use metadata
style.
* ada-valprint.c (val_print_packed_array_elements, printstr)
(print_field_values, ada_val_print_ref, ada_val_print): Use
metadata style.
* ada-typeprint.c (print_array_type, ada_print_type): Use metadata
style.
* ada-tasks.c (print_ada_task_info, info_task): Use metadata
style.
* ada-lang.c (user_select_syms): Use metadata style.
gdb/testsuite/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* lib/gdb-utils.exp (style): Handle "metadata" argument.
* gdb.base/style.exp: Add metadata style test.
|
|
This changes various spots in gdb to use the new %p format suffixes.
gdb/ChangeLog
2019-10-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* symtab.c (print_symbol_info): Use %ps.
(print_msymbol_info): Use %ps.
* symfile.c (symbol_file_add_with_addrs): Use %ps.
* printcmd.c (print_variable_and_value): Use %ps.
* macrocmd.c (show_pp_source_pos): Use %ps.
* infrun.c (print_exited_reason): Use ui_out::message.
* breakpoint.c (watchpoint_check, print_one_breakpoint_location)
(describe_other_breakpoints): Use ui_out::message and new
formats.
(say_where): Use new formats.
(bkpt_print_it, tracepoint_print_one_detail): Use ui_out::message
and new formats.
|
|
This is for add_setshow_boolean_cmd as well as the gdb::option interface.
gdb/ChangeLog:
2019-09-17 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_ignore_descriptive_types_p): Change to bool.
(print_signatures): Likewise.
(trust_pad_over_xvs): Likewise.
* arch/aarch64-insn.c (aarch64_debug): Likewise.
* arch/aarch64-insn.h (aarch64_debug): Likewise.
* arm-linux-nat.c (arm_apcs_32): Likewise.
* arm-linux-tdep.c (arm_apcs_32): Likewise.
* arm-nbsd-nat.c (arm_apcs_32): Likewise.
* arm-tdep.c (arm_debug): Likewise.
(arm_apcs_32): Likewise.
* auto-load.c (debug_auto_load): Likewise.
(auto_load_gdb_scripts): Likewise.
(global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* auto-load.h (global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* breakpoint.c (disconnected_dprintf): Likewise.
(breakpoint_proceeded): Likewise.
(automatic_hardware_breakpoints): Likewise.
(always_inserted_mode): Likewise.
(target_exact_watchpoints): Likewise.
(_initialize_breakpoint): Update.
* breakpoint.h (target_exact_watchpoints): Change to bool.
* btrace.c (maint_btrace_pt_skip_pad): Likewise.
* cli/cli-cmds.c (trace_commands): Likewise.
* cli/cli-cmds.h (trace_commands): Likewise.
* cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument
to bool*.
* cli/cli-logging.c (logging_overwrite): Change to bool.
(logging_redirect): Likewise.
(debug_redirect): Likewise.
* cli/cli-option.h (option_def) <boolean>: Change return type to bool*.
(struct boolean_option_def) <get_var_address_cb_>: Change return type
to bool.
<boolean_option_def>: Update.
(struct flag_option_def): Change default type of Context to bool
from int.
<flag_option_def>: Change return type of var_address_cb_ to bool*.
* cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*.
(get_setshow_command_value_string): Likewise.
* cli/cli-style.c (cli_styling): Change to bool.
(source_styling): Likewise.
* cli/cli-style.h (source_styling): Likewise.
(cli_styling): Likewise.
* cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change
to bool.
* command.h (var_types): Update comment.
(add_setshow_boolean_cmd): Change int* var argument to bool*.
* compile/compile-cplus-types.c (debug_compile_cplus_types): Change to
bool.
(debug_compile_cplus_scopes): Likewise.
* compile/compile-internal.h (compile_debug): Likewise.
* compile/compile.c (compile_debug): Likewise.
(struct compile_options) <raw>: Likewise.
* cp-support.c (catch_demangler_crashes): Likewise.
* cris-tdep.c (usr_cmd_cris_version_valid): Likewise.
(usr_cmd_cris_dwarf2_cfi): Likewise.
* csky-tdep.c (csky_debug): Likewise.
* darwin-nat.c (enable_mach_exceptions): Likewise.
* dcache.c (dcache_enabled_p): Likewise.
* defs.h (info_verbose): Likewise.
* demangle.c (demangle): Likewise.
(asm_demangle): Likewise.
* dwarf-index-cache.c (debug_index_cache): Likewise.
* dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2read.c (check_physname): Likewise.
(use_deprecated_index_sections): Likewise.
(dwarf_always_disassemble): Likewise.
* eval.c (overload_resolution): Likewise.
* event-top.c (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* event-top.h (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* exec.c (write_files): Likewise.
* fbsd-nat.c (debug_fbsd_lwp): Likewise
(debug_fbsd_nat): Likewise.
* frame.h (struct frame_print_options) <print_raw_frame_arguments>:
Likewise.
(struct set_backtrace_options) <backtrace_past_main>: Likewise.
<backtrace_past_entry> Likewise.
* gdb-demangle.h (demangle): Likewise.
(asm_demangle): Likewise.
* gdb_bfd.c (bfd_sharing): Likewise.
* gdbcore.h (write_files): Likewise.
* gdbsupport/common-debug.c (show_debug_regs): Likewise.
* gdbsupport/common-debug.h (show_debug_regs): Likewise.
* gdbthread.h (print_thread_events): Likewise.
* gdbtypes.c (opaque_type_resolution): Likewise.
(strict_type_checking): Likewise.
* gnu-nat.c (gnu_debug_flag): Likewise.
* guile/scm-auto-load.c (auto_load_guile_scripts): Likewise.
* guile/scm-param.c (pascm_variable): Add boolval.
(add_setshow_generic): Update.
(pascm_param_value): Update.
(pascm_set_param_value_x): Update.
* hppa-tdep.c (hppa_debug): Change to bool..
* infcall.c (may_call_functions_p): Likewise.
(coerce_float_to_double_p): Likewise.
(unwind_on_signal_p): Likewise.
(unwind_on_terminating_exception_p): Likewise.
* infcmd.c (startup_with_shell): Likewise.
* inferior.c (print_inferior_events): Likewise.
* inferior.h (startup_with_shell): Likewise.
(print_inferior_events): Likewise.
* infrun.c (step_stop_if_no_debug): Likewise.
(detach_fork): Likewise.
(debug_displaced): Likewise.
(disable_randomization): Likewise.
(non_stop): Likewise.
(non_stop_1): Likewise.
(observer_mode): Likewise.
(observer_mode_1): Likewise.
(set_observer_mode): Update.
(sched_multi): Change to bool.
* infrun.h (debug_displaced): Likewise.
(sched_multi): Likewise.
(step_stop_if_no_debug): Likewise.
(non_stop): Likewise.
(disable_randomization): Likewise.
* linux-tdep.c (use_coredump_filter): Likewise.
(dump_excluded_mappings): Likewise.
* linux-thread-db.c (auto_load_thread_db): Likewise.
(check_thread_db_on_load): Likewise.
* main.c (captured_main_1): Update.
* maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt,
xx2_opt, boolean_opt>: Change to bool.
* maint-test-settings.c (maintenance_test_settings_boolean): Likewise.
* maint.c (maintenance_profile_p): Likewise.
(per_command_time): Likewise.
(per_command_space): Likewise.
(per_command_symtab): Likewise.
* memattr.c (inaccessible_by_default): Likewise.
* mi/mi-main.c (mi_async): Likewise.
(mi_async_1): Likewise.
* mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise.
* nat/fork-inferior.h (startup_with_shell): Likewise.
* nat/linux-namespaces.c (debug_linux_namespaces): Likewise.
* nat/linux-namespaces.h (debug_linux_namespaces): Likewise.
* nios2-tdep.c (nios2_debug): Likewise.
* or1k-tdep.c (or1k_debug): Likewise.
* parse.c (parser_debug): Likewise.
* parser-defs.h (parser_debug): Likewise.
* printcmd.c (print_symbol_filename): Likewise.
* proc-api.c (procfs_trace): Likewise.
* python/py-auto-load.c (auto_load_python_scripts): Likewise.
* python/py-param.c (union parmpy_variable): Add "bool boolval" field.
(set_parameter_value): Update.
(add_setshow_generic): Update.
* python/py-value.c (copy_py_bool_obj): Change argument from int*
to bool*.
* python/python.c (gdbpy_parameter_value): Cast to bool* instead of
int*.
* ravenscar-thread.c (ravenscar_task_support): Change to bool.
* record-btrace.c (record_btrace_target::store_registers): Update.
* record-full.c (record_full_memory_query): Change to bool.
(record_full_stop_at_limit): Likewise.
* record-full.h (record_full_memory_query): Likewise.
* remote-notif.c (notif_debug): Likewise.
* remote-notif.h (notif_debug): Likewise.
* remote.c (use_range_stepping): Likewise.
(interrupt_on_connect): Likewise.
(remote_break): Likewise.
* ser-tcp.c (tcp_auto_retry): Likewise.
* ser-unix.c (serial_hwflow): Likewise.
* skip.c (debug_skip): Likewise.
* solib-aix.c (solib_aix_debug): Likewise.
* spu-tdep.c (spu_stop_on_load_p): Likewise.
(spu_auto_flush_cache_p): Likewise.
* stack.c (struct backtrace_cmd_options) <full, no_filters, hide>:
Likewise.
(struct info_print_options) <quiet>: Likewise.
* symfile-debug.c (debug_symfile): Likewise.
* symfile.c (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symfile.h (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symtab.c (basenames_may_differ): Likewise.
(struct filename_partial_match_opts) <dirname, basename>: Likewise.
(struct info_print_options) <quiet, exclude_minsyms>: Likewise.
(struct info_types_options) <quiet>: Likewise.
* symtab.h (demangle): Likewise.
(basenames_may_differ): Likewise.
* target-dcache.c (stack_cache_enabled_1): Likewise.
(code_cache_enabled_1): Likewise.
* target.c (trust_readonly): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
(auto_connect_native_target): Likewise.
(target_stop_and_wait): Update.
(target_async_permitted): Change to bool.
(target_async_permitted_1): Likewise.
(may_write_registers_1): Likewise.
(may_write_memory_1): Likewise.
(may_insert_breakpoints_1): Likewise.
(may_insert_tracepoints_1): Likewise.
(may_insert_fast_tracepoints_1): Likewise.
(may_stop_1): Likewise.
* target.h (target_async_permitted): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
* thread.c (struct info_threads_opts) <show_global_ids>: Likewise.
(make_thread_apply_all_options_def_group): Change argument from int*
to bool*.
(thread_apply_all_command): Update.
(print_thread_events): Change to bool.
* top.c (confirm): Likewise.
(command_editing_p): Likewise.
(history_expansion_p): Likewise.
(write_history_p): Likewise.
(info_verbose): Likewise.
* top.h (confirm): Likewise.
(history_expansion_p): Likewise.
* tracepoint.c (disconnected_tracing): Likewise.
(circular_trace_buffer): Likewise.
* typeprint.c (print_methods): Likewise.
(print_typedefs): Likewise.
* utils.c (debug_timestamp): Likewise.
(sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* utils.h (sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* valops.c (overload_resolution): Likewise.
* valprint.h (struct value_print_options) <prettyformat_arrays,
prettyformat_structs, vtblprint, unionprint, addressprint, objectprint,
stop_print_at_null, print_array_indexes, deref_ref, static_field_print,
pascal_static_field_print, raw, summary, symbol_print, finish_print>:
Likewise.
* windows-nat.c (new_console): Likewise.
(cygwin_exceptions): Likewise.
(new_group): Likewise.
(debug_exec): Likewise.
(debug_events): Likewise.
(debug_memory): Likewise.
(debug_exceptions): Likewise.
(useshell): Likewise.
* windows-tdep.c (maint_display_all_tib): Likewise.
* xml-support.c (debug_xml): Likewise.
|
|
In Ada, the programmer can request that a range type with a non-zero
base be stored in the minimal number of bits required for the range.
This is done by biasing the values; so, for example, a range of -7..-4
may be stored as two bits with a bias of -7.
This patch implements this for gdb. It is done by adding a bias to
struct range_bounds and then adjusting a few spots to handle this.
The test case is written to use -fgnat-encodings=minimal, but a future
compiler patch will change the compiler to emit DW_AT_GNU_bias with
-fgnat-encodings=gdb. It seemed good to get the gdb patch in first.
Tested on x86-64 Fedora 29; plus a variety of targets using AdaCore's
internal test suite.
gdb/ChangeLog
2019-09-03 Tom Tromey <tromey@adacore.com>
* ada-valprint.c (ada_val_print_num): Don't recurse for range
types.
(has_negatives): Unbias a range type bound.
* dwarf2read.c (read_subrange_type): Handle DW_AT_GNU_bias.
* gdbtypes.c (operator==): Handle new field.
(create_range_type): Add "bias" parameter.
(create_static_range_type, resolve_dynamic_range): Update.
* gdbtypes.h (struct range_bounds) <bias>: New member.
(create_range_type): Add bias parameter.
* printcmd.c (print_scalar_formatted): Unbias range types.
* value.c (unpack_long): Unbias range types.
(pack_long): Bias range types.
gdb/testsuite/ChangeLog
2019-09-03 Tom Tromey <tromey@adacore.com>
* gdb.ada/bias.exp: New file.
* gdb.ada/bias/bias.adb: New file.
* gdb.ada/print_chars.exp: Add regression test.
* gdb.ada/print_chars/foo.adb (My_Character): New type.
(MC): New variable.
|
|
Sergio pointed out that commit commit aa3b6533 ("Allow nested function
displays") regressed a few gdb.fortran tests. I was able to reproduce
these failures with gcc head.
The bug is that some spots calling contained_in will in fact do the
wrong thing if nested functions are considered as contained. In the
particular case of the Fortran regression, it was the call in
block_innermost_frame, being called from get_hosting_frame -- in this
case, the caller is specifically trying to avoid the nested case.
This patch fixes the problem by adding an "allow_nested" parameter to
contained_in, essentially reverting the change for most callers.
gdb/ChangeLog
2019-08-19 Tom Tromey <tromey@adacore.com>
* printcmd.c (do_one_display, info_display_command): Update.
* block.h (contained_in): Return bool. Add allow_nested
parameter.
* block.c (contained_in): Return bool. Add allow_nested
parameter.
|
|
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
|
|
Currently some code in gdb uses build_help with N_(), like:
static const std::string compile_print_help
= gdb::option::build_help (N_("\
I believe this is incorrect. The N_ macro is used to mark text that
should end up in the message catalog, but which will be translated by
a later call to gettext.
However, in this case, there is no later call to gettext, so (if gdb
had translations), this text would remain untranslated.
Instead, I think using the ordinary _() macro is correct here.
Translators will have to know to preserve "%OPTIONS%" in the text --
but that seems both unavoidable and fine.
Tested by rebuilding as there's not much else to do.
gdb/ChangeLog
2019-08-05 Tom Tromey <tromey@adacore.com>
* compile/compile.c (_initialize_compile): Use _(), not N_().
* thread.c (_initialize_thread): Use _(), not N_().
* stack.c (_initialize_stack): Use _(), not N_().
* printcmd.c (_initialize_printcmd): Use _(), not N_().
|
|
When examining addresses associated with blocks with non-contiguous
address ranges, it's not uncommon to see large positive offsets which,
for some address width, actually represent a smaller negative offset.
Here's an example taken from the test case (using the
dw2-ranges-func-lo-cold executable):
(gdb) x/5i foo_cold
0x40110d <foo+4294967277>: push %rbp
0x40110e <foo+4294967278>: mov %rsp,%rbp
0x401111 <foo+4294967281>: callq 0x401106 <baz>
0x401116 <foo+4294967286>: nop
0x401117 <foo+4294967287>: pop %rbp
This commit, in conjuction with an earlier patch from this series, causes
cases like the above to be displayed like this (below) instead:
(gdb) x/5i foo_cold
0x40110d <foo_cold>: push %rbp
0x40110e <foo-18>: mov %rsp,%rbp
0x401111 <foo-15>: callq 0x401106 <baz>
0x401116 <foo-10>: nop
0x401117 <foo-9>: pop %rbp
Note that the address of foo_cold is now (due to another patch) being
displayed as <foo_cold> instead of <foo+BigOffset>. The subsequent
lines are shown as negative offsets from foo.
Disassembly using the "disassemble" command is somewhat affected by
these changes:
Before:
(gdb) disassemble foo_cold
Dump of assembler code for function foo:
Address range 0x401120 to 0x40113b:
0x0000000000401120 <+0>: push %rbp
0x0000000000401121 <+1>: mov %rsp,%rbp
0x0000000000401124 <+4>: callq 0x401119 <bar>
0x0000000000401129 <+9>: mov 0x2ef1(%rip),%eax # 0x404020 <e>
0x000000000040112f <+15>: test %eax,%eax
0x0000000000401131 <+17>: je 0x401138 <foo+24>
0x0000000000401133 <+19>: callq 0x40110d <foo+4294967277>
0x0000000000401138 <+24>: nop
0x0000000000401139 <+25>: pop %rbp
0x000000000040113a <+26>: retq
Address range 0x40110d to 0x401119:
0x000000000040110d <+-19>: push %rbp
0x000000000040110e <+-18>: mov %rsp,%rbp
0x0000000000401111 <+-15>: callq 0x401106 <baz>
0x0000000000401116 <+-10>: nop
0x0000000000401117 <+-9>: pop %rbp
0x0000000000401118 <+-8>: retq
End of assembler dump.
After:
(gdb) disassemble foo_cold
Dump of assembler code for function foo:
Address range 0x401120 to 0x40113b:
0x0000000000401120 <+0>: push %rbp
0x0000000000401121 <+1>: mov %rsp,%rbp
0x0000000000401124 <+4>: callq 0x401119 <bar>
0x0000000000401129 <+9>: mov 0x2ef1(%rip),%eax # 0x404020 <e>
0x000000000040112f <+15>: test %eax,%eax
0x0000000000401131 <+17>: je 0x401138 <foo+24>
0x0000000000401133 <+19>: callq 0x40110d <foo_cold>
0x0000000000401138 <+24>: nop
0x0000000000401139 <+25>: pop %rbp
0x000000000040113a <+26>: retq
Address range 0x40110d to 0x401119:
0x000000000040110d <-19>: push %rbp
0x000000000040110e <-18>: mov %rsp,%rbp
0x0000000000401111 <-15>: callq 0x401106 <baz>
0x0000000000401116 <-10>: nop
0x0000000000401117 <-9>: pop %rbp
0x0000000000401118 <-8>: retq
End of assembler dump.
Note that negative offsets are now displayed without the leading "+".
Also, the callq to foo_cold is now displayed as such instead of a callq
to foo with a large positive offset.
gdb/ChangeLog:
* printcmd.c (print_address_symbolic): Print negative offsets.
(build_address_symbolic): Force signed arithmetic when computing
offset.
|
|
build_address_symbolic contains some code which causes it to
prefer the minsym over the the function symbol in certain cases.
The cases where this occurs are the same as the "certain pathological
cases" that used to exist in find_frame_funname().
This commit largely disables that code; it will only prefer the
minsym when the address of minsym is identical to that of the address
under consideration AND the function address for the symbtab sym is
not the same as the address under consideration.
So, without this change, when using the dw2-ranges-func-lo-cold
executable from the gdb.dwarf2/dw2-ranges-func.exp test, GDB exhibits
the following behavior:
(gdb) x/5i foo_cold
0x40110d <foo+4294967277>: push %rbp
0x40110e <foo+4294967278>: mov %rsp,%rbp
0x401111 <foo+4294967281>: callq 0x401106 <baz>
0x401116 <foo+4294967286>: nop
0x401117 <foo+4294967287>: pop %rbp
On the other hand, still without this change, using the
dw2-ranges-func-hi-cold executable from the same test, GDB
does this instead:
(gdb) x/5i foo_cold
0x401128 <foo_cold>: push %rbp
0x401129 <foo_cold+1>: mov %rsp,%rbp
0x40112c <foo_cold+4>: callq 0x401134 <baz>
0x401131 <foo_cold+9>: nop
0x401132 <foo_cold+10>: pop %rbp
This is inconsistent behavior. When foo_cold is at a lower
address than the function's entry point, the symtab symbol (foo)
is displayed along with a large positive offset which would wrap
around the address space if the address space were only 32 bits wide.
(A later patch fixes this problem by displaying negative offsets.)
This commit makes the behavior uniform for both the "lo-cold" and
"hi-cold" cases:
lo-cold:
(gdb) x/5i foo_cold
0x40110d <foo_cold>: push %rbp
0x40110e <foo-18>: mov %rsp,%rbp
0x401111 <foo-15>: callq 0x401106 <baz>
0x401116 <foo-10>: nop
0x401117 <foo-9>: pop %rbp
hi-cold:
(gdb) x/5i foo_cold
0x401128 <foo_cold>: push %rbp
0x401129 <foo+35>: mov %rsp,%rbp
0x40112c <foo+38>: callq 0x401134 <baz>
0x401131 <foo+43>: nop
0x401132 <foo+44>: pop %rbp
In both cases, the symbol shown for the address at which foo_cold
resides is shown as <foo_cold>. Subsequent offsets are shown as
either negative or positive offsets from the entry pc for foo.
When disassembling a function, care must be taken to NOT display
<+0> as the offset for the second range. For this reason, I found
it necessary to add the "prefer_sym_over_minsym" parameter to
build_address_symbolic. The type of this flag is a bool; do_demangle
ought to be a bool also, so I made this change at the same time.
gdb/ChangeLog:
* valprint.h (build_address_symbolic): Add "prefer_sym_over_minsym"
parameter. Change type of "do_demangle" to bool.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Pass suitable "prefer_sym_over_minsym" flag to
build_address_symbolic(). Don't output "+" for negative offsets.
* printcmd.c (print_address_symbolic): Update invocation of
build_address_symbolic to include a "prefer_sym_over_minsym"
flag.
(build_address_symbolic): Add "prefer_sym_over_minsym" parameter.
Restrict cases in which use of minimal symbol is preferred to that
of a found symbol. Update comments.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
Without this patch, GDB printf command calls malloc on the target,
writes the convenience var content to the target,
re-reads the content from the target, and then locally printf the string.
This implies inferior calls, and does not work when there is no running
inferior, or when the inferior is a core dump.
With this patch, printf command can printf string convenience variables
without inferior function calls.
Ada string convenience variables can also be printed.
gdb/ChangeLog
2019-07-08 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention that GDB printf and eval commands can now print
C-style and Ada-style convenience var strings without
calling the inferior.
* printcmd.c (printf_c_string): Locally print GDB internal var
instead of transiting via the inferior.
(printf_wide_c_string): Likewise.
gdb/testsuite/ChangeLog
2019-07-08 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/printcmds.exp: Test printing C string and
C wide string convenience vars without transiting via the inferior.
Also make test names unique.
|
|
This patch adds support for "print -option optval --", etc.
Likewise for "compile print".
We'll get:
~~~~~~
(gdb) help print
Print value of expression EXP.
Usage: print [[OPTION]... --] [/FMT] [EXP]
Options:
-address [on|off]
Set printing of addresses.
-array [on|off]
Set pretty formatting of arrays.
-array-indexes [on|off]
Set printing of array indexes.
-elements NUMBER|unlimited
Set limit on string chars or array elements to print.
"unlimited" causes there to be no limit.
-max-depth NUMBER|unlimited
Set maximum print depth for nested structures, unions and arrays.
When structures, unions, or arrays are nested beyond this depth then they
will be replaced with either '{...}' or '(...)' depending on the language.
Use "unlimited" to print the complete structure.
-null-stop [on|off]
Set printing of char arrays to stop at first null char.
-object [on|off]
Set printing of C++ virtual function tables.
-pretty [on|off]
Set pretty formatting of structures.
-repeats NUMBER|unlimited
Set threshold for repeated print elements.
"unlimited" causes all elements to be individually printed.
-static-members [on|off]
Set printing of C++ static members.
-symbol [on|off]
Set printing of symbol names when printing pointers.
-union [on|off]
Set printing of unions interior to structures.
-vtbl [on|off]
Set printing of C++ virtual function tables.
Note: because this command accepts arbitrary expressions, if you
specify any command option, you must use a double dash ("--")
to mark the end of option processing. E.g.: "print -o -- myobj".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I want to highlight the comment above about "--".
At first, I thought we could make the print command parse the options,
and if the option wasn't recognized, fallback to parsing as an
expression. Then, if the user wanted to disambiguate, he'd use the
"--" option delimiter. For example, if you had a variable called
"object" and you wanted to print its negative, you'd have to do:
(gdb) print -- -object
After getting that working, I saw that gdb.pascal/floats.exp
regressed, in these tests:
gdb_test "print -r" " = -1\\.2(499.*|5|500.*)"
gdb_test "print -(r)" " = -1.2(499.*|5|500.*)"
gdb_test "print -(r + s)" " = -3\\.4(499.*|5|500.*)"
It's the first one that I found most concerning. It regressed because
"-r" is the abbreviation of "-raw". I realized then that the behavior
change was a bit risker than I'd like, considering scripts, wrappers
around gdb, etc., and even user expectation. So instead, I made the
print command _require_ the "--" options delimiter if you want to
specify any option. So:
(gdb) print -r
is parsed as an expression, and
(gdb) print -r --
is parsed as an option.
I noticed that that's also what lldb's expr (the equivalent of print)
does to handle the same problem.
Going back the options themselves, note that:
- you can shorten option names, as long as unambiguous.
- For boolean options, 0/1 stand for off/on.
- For boolean options, "true" is implied.
So these are all equivalent:
(gdb) print -object on -static-members off -pretty on -- foo
(gdb) print -object -static-members off -pretty -- foo
(gdb) print -object -static-members 0 -pretty -- foo
(gdb) print -o -st 0 -p -- foo
TAB completion is fully supported:
(gdb) p -[TAB]
-address -elements -pretty -symbol
-array -null-stop -repeats -union
-array-indexes -object -static-members -vtbl
Note that the code is organized such that some of the options and the
"set/show" commands code is shared. In particular, the "print"
options and the corresponding "set print" commands are defined with
the same structures. The commands are installed with the
gdb::option::add_setshow_cmds_for_options function.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* compile/compile.c: Include "cli/cli-option.h".
(compile_print_value): Scope data pointer is now a
value_print_options pointer; adjust.
(compile_print_command): Process options. Scope data pointer is
now a value_print_options pointer; adjust.
(_initialize_compile): Update "compile print"'s help to include
supported options. Install a completer for "compile print".
* cp-valprint.c (show_vtblprint, show_objectprint)
(show_static_field_print): Delete.
(_initialize_cp_valprint): Don't install "set print
static-members", "set print vtbl", "set print object" here.
* printcmd.c: Include "cli/cli-option.h" and
"common/gdb_optional.h".
(print_command_parse_format): Rework to fill in a
value_print_options instead of a format_data.
(print_value): Change parameter type from format_data pointer to
value_print_options reference. Adjust.
(print_command_1): Process options. Adjust to pass down a
value_print_options.
(print_command_completer): New.
(_initialize_printcmd): Install print_command_completer as
handle_brkchars completer for the "print" command. Update
"print"'s help to include supported options.
* valprint.c: Include "cli/cli-option.h".
(show_vtblprint, show_objectprint, show_static_field_print): Moved
here from cp-valprint.c.
(boolean_option_def, uinteger_option_def)
(value_print_option_defs, make_value_print_options_def_group):
New. Use gdb::option::add_setshow_cmds_for_options to install
"set print elements", "set print null-stop", "set print repeats",
"set print pretty", "set print union", "set print array", "set
print address", "set print symbol", "set print array-indexes".
* valprint.h: Include <string> and "cli/cli-option.h".
(make_value_print_options_def_group): Declare.
(print_value): Change parameter type from format_data pointer to
value_print_options reference.
(print_command_completer): Declare.
gdb/testsuite/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* gdb.base/options.exp: Build executable.
(test-print): New procedure.
(top level): Call it, once for "print" and another for "compile
print".
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
|
This changes the exception's "message" member to be a shared_ptr
wrapping a std::string. This allows removing the stack of exception
messages, because now exceptions will self-destruct when needed. This
also adds a noexcept copy constructor and operator= to gdb_exception,
plus a "what" method.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c (gdb_xml_parser::parse): Update.
* x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update.
* value.c (show_convenience): Update.
* unittests/cli-utils-selftests.c (test_number_or_range_parser)
(test_parse_flags_qcs): Update.
* thread.c (thr_try_catch_cmd): Update.
* target.c (target_translate_tls_address): Update.
* stack.c (print_frame_arg, read_frame_local, read_frame_arg)
(info_frame_command_core, frame_apply_command_count): Update.
* rust-exp.y (rust_lex_exception_test): Update.
* riscv-tdep.c (riscv_print_one_register_info): Update.
* remote.c (remote_target::enable_btrace): Update.
* record-btrace.c (record_btrace_enable_warn): Update.
* python/py-utils.c (gdbpy_convert_exception): Update.
* printcmd.c (do_one_display, print_variable_and_value): Update.
* mi/mi-main.c (mi_print_exception): Update.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
* linux-nat.c (linux_nat_target::attach): Update.
* linux-fork.c (class scoped_switch_fork_info): Update.
* infrun.c (displaced_step_prepare): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update.
* gnu-v3-abi.c (print_one_vtable): Update.
* frame.c (get_prev_frame_always): Update.
* f-valprint.c (info_common_command_for_block): Update.
* exec.c (try_open_exec_file): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Update.
* dwarf2-frame.c (dwarf2_build_frame_info): Update.
* dwarf-index-cache.c (index_cache::store)
(index_cache::lookup_gdb_index): Update.
* darwin-nat.c (maybe_cache_shell): Update.
* cp-valprint.c (cp_print_value_fields): Update.
* compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol)
(gcc_cplus_symbol_address): Update.
* compile/compile-c-symbols.c (gcc_convert_symbol)
(gcc_symbol_address, generate_c_for_for_one_variable): Update.
* common/selftest.c: Update.
* common/common-exceptions.h (struct gdb_exception) <message>: Now
a std::string.
(exception_try_scope_entry, exception_try_scope_exit): Don't
declare.
(struct exception_try_scope): Remove.
(TRY): Don't use exception_try_scope.
(struct gdb_exception): Add constructor, operator=.
<what>: New method.
(struct gdb_exception_RETURN_MASK_ALL)
(struct gdb_exception_RETURN_MASK_ERROR)
(struct gdb_exception_RETURN_MASK_QUIT): Add constructor.
(struct gdb_quit_bad_alloc): Update.
* common/common-exceptions.c (exception_none): Change
initializer.
(struct catcher) <state, exception>: Initialize inline.
<prev>: Remove member.
(current_catcher): Remove.
(catchers): New global.
(exceptions_state_mc_init): Simplify.
(catcher_pop): Remove.
(exceptions_state_mc, exceptions_state_mc_catch): Update.
(try_scope_depth, exception_try_scope_entry)
(exception_try_scope_exit): Remove.
(throw_exception_sjlj): Update.
(exception_messages, exception_messages_size): Remove.
(throw_it): Simplify.
(gdb_exception_sliced_copy): Remove.
(throw_exception_cxx): Update.
* cli/cli-script.c (script_from_file): Update.
* breakpoint.c (insert_bp_location, update_breakpoint_locations):
Update.
* ada-valprint.c (ada_val_print): Update.
* ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr)
(create_excep_cond_exprs): Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c (handle_btrace_general_set, handle_qxfer_btrace)
(handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup)
(captured_main, main): Update.
* gdbreplay.c (main): Update.
|
|
This changes the parsing API so that callers that are interested in
tracking the innermost block must instantiate an
innermost_block_tracker and pass it in. Then, a pointer to this
object is stored in the parser_state.
2019-04-04 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_create): Update.
* rust-exp.y (struct rust_parser) <update_innermost_block,
lookup_symbol>: New methods.
(rust_parser::update_innermost_block, rust_parser::lookup_symbol):
Rename.
(rust_parser::rust_lookup_type)
(rust_parser::convert_ast_to_expression, rust_lex_tests): Update.
* printcmd.c (display_command, do_one_display): Update.
* parser-defs.h (struct parser_state) <parser_state>: Add
"tracker" parameter.
(block_tracker): New member.
(class innermost_block_tracker) <innermost_block_tracker>: Add
"types" parameter.
<reset>: Remove method.
(innermost_block): Don't declare.
(null_post_parser): Update.
* parse.c (innermost_block): Remove global.
(write_dollar_variable): Update.
(parse_exp_1, parse_exp_in_context): Add "tracker" parameter.
Remove "tracker_types" parameter.
(parse_expression): Add "tracker" parameter.
(parse_expression_for_completion): Update.
(null_post_parser): Add "tracker" parameter.
* p-exp.y: Update rules.
* m2-exp.y: Update rules.
* language.h (struct language_defn) <la_post_parser>: Add
"tracker" parameter.
* go-exp.y: Update rules.
* f-exp.y: Update rules.
* expression.h (parse_expression, parse_exp_1): Add "tracker"
parameter.
* d-exp.y: Update rules.
* c-exp.y: Update rules.
* breakpoint.c (set_breakpoint_condition): Create an
innermost_block_tracker.
(watch_command_1): Likewise.
* ada-lang.c (resolve): Add "tracker" parameter.
(resolve_subexp): Likewise.
* ada-exp.y (write_var_from_sym): Update.
|
|
I noticed that the help for "info addr" did not include a "usage"
line; and when adding it I went through and fixed a few minor issues
in printcmd.c:
* Added usage lines to all commands
* Updated the help text for some commands
* Changed some help to use upper case metasyntactic variables
* Removed some dead code
Regression tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-29 Tom Tromey <tromey@adacore.com>
* printcmd.c (_initialize_printcmd): Add usage lines. Update some
help text. Remove dead code.
gdb/testsuite/ChangeLog
2019-03-29 Tom Tromey <tromey@adacore.com>
* gdb.base/help.exp: Tighten apropos regexp.
|
|
I ran across a comment in symfile.c today:
/* Clear globals which might have pointed into a removed objfile.
FIXME: It's not clear which of these are supposed to persist
between expressions and which ought to be reset each time. */
It seems to me that this can be clarified: the parser entry points
ought to reset the innermost block tracker (and the expression context
block), and these should not be considered valid for code to use at
arbitrary times -- only immediately after an expression has been
parsed.
This patch implements this idea. This could be further improved by
removing the parser globals and changing the parser functions to
return this information, but I have not done this.
Tested by the buildbot.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_create): Update.
* symfile.c (clear_symtab_users): Don't reset innermost_block.
* printcmd.c (display_command, do_one_display): Don't reset
innermost_block.
* parser-defs.h (enum innermost_block_tracker_type): Move to
expression.h.
(innermost_block): Update comment.
* parse.c (parse_exp_1): Add tracker_types parameter.
(parse_exp_in_context): Rename from parse_exp_in_context_1. Add
tracker_types parameter. Reset innermost_block.
(parse_exp_in_context): Remove.
(parse_expression_for_completion): Update.
* objfiles.c (~objfile): Don't reset expression_context_block or
innermost_block.
* expression.h (enum innermost_block_tracker_type): Move from
parser-defs.h.
(parse_exp_1): Add tracker_types parameter.
* breakpoint.c (set_breakpoint_condition, watch_command_1): Don't
reset innermost_block.
|
|
A customer noticed some mildly odd MI output, where CLI output was
split into multiple MI strings at unusual boundaries, like this:
~"$1 = (b => true"
~", p => 0x407260"
This is technically correct according to the MI spec, but still
unusual, in that there's no particular reason for the string to be
split where it is.
I tracked this down to a call to gdb_flush in generic_val_print.
Then, I went through all calls to gdb_flush and removed the ones I
thought were superfluous. In particular:
* Any call in the value-printing code;
* Likewise the type-printing code (just a single call); and
* Any call that immediately followed a printf that obviously
ended with a newline, my belief being that gdb's standard output
streams are line buffered (by inheriting the behavior from stdio)
Regression tested on x86-64 Fedora 29.
I didn't add a new test case. I tend to think we don't necessarily
want to specify this behavior in the tests. Let me know what you
think of this.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach)
(windows_nat_target::detach): Don't call gdb_flush.
* valprint.c (generic_val_print, val_print, val_print_string):
Don't call gdb_flush.
* utils.c (defaulted_query): Don't call gdb_flush.
* typeprint.c (print_type_scalar): Don't call gdb_flush.
* target.c (target_announce_detach): Don't call gdb_flush.
* sparc64-tdep.c (adi_print_versions): Don't call gdb_flush.
* remote.c (extended_remote_target::attach): Don't call
gdb_flush.
* procfs.c (procfs_target::detach): Don't call gdb_flush.
* printcmd.c (do_examine): Don't call gdb_flush.
(info_display_command): Don't call gdb_flush.
* p-valprint.c (pascal_val_print): Don't call gdb_flush.
* nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush.
* memattr.c (info_mem_command): Don't call gdb_flush.
* mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush.
* m2-valprint.c (m2_val_print): Don't call gdb_flush.
* infrun.c (follow_exec, handle_command): Don't call gdb_flush.
* inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush.
* hppa-tdep.c (unwind_command): Don't call gdb_flush.
* gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush.
(gnu_nat_target::detach): Don't call gdb_flush.
* f-valprint.c (f_val_print): Don't call gdb_flush.
* darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush.
* cli/cli-script.c (read_command_lines): Don't call gdb_flush.
* cli/cli-cmds.c (shell_escape, print_disassembly): Don't call
gdb_flush.
* c-valprint.c (c_val_print): Don't call gdb_flush.
* ada-valprint.c (ada_print_scalar): Don't call gdb_flush.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
I wrote a little script to detect duplicate or commented-out #includes
and ran it on gdb. This patch is the result. Tested by rebuilding.
gdb/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* ui-out.c: Fix includes.
* tui/tui-source.c: Fix includes.
* target.c: Fix includes.
* remote.c: Fix includes.
* regcache.c: Fix includes.
* python/py-block.c: Fix includes.
* printcmd.c: Fix includes.
* or1k-tdep.c: Fix includes.
* mi/mi-main.c: Fix includes.
* m32r-tdep.c: Fix includes.
* csky-tdep.c: Fix includes.
* compile/compile-cplus-types.c: Fix includes.
* cli/cli-interp.c: Fix includes.
gdb/gdbserver/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* tracepoint.c: Fix includes.
* remote-utils.c: Fix includes.
* linux-x86-low.c: Fix includes.
gdb/stubs/ChangeLog
2019-01-21 Tom Tromey <tom@tromey.com>
* ia64vms-stub.c: Fix includes.
|
|
This changes the all_objfiles range adapter to be a method on the
program space, and fixes up all the users.
gdb/ChangeLog
2019-01-17 Tom Tromey <tom@tromey.com>
* progspace.h (program_space) <objfiles_range>: New typedef.
<objfiles>: New method.
<objfiles_head>: Rename from objfiles.
(object_files): Update.
* guile/scm-progspace.c (gdbscm_progspace_objfiles): Update.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Update.
* guile/scm-objfile.c (gdbscm_objfiles): Update.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers):
Update.
* python/py-progspace.c (pspy_get_objfiles): Update.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Update.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Update.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Update.
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_objfile_from_block)
(lookup_static_symbol, basic_lookup_transparent_type)
(find_pc_sect_compunit_symtab, find_symbol_at_address)
(find_line_symtab, info_sources_command)
(default_collect_symbol_completion_matches_break_on)
(make_source_files_completion_list, find_main_name): Update.
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics, maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_print_objfiles)
(maintenance_info_symtabs, maintenance_check_symtabs)
(maintenance_expand_symtabs, maintenance_info_line_tables):
Update.
* symfile.c (remove_symbol_file_command, overlay_invalidate_all)
(find_pc_overlay, find_pc_mapped_section, list_overlays_command)
(map_overlay_command, unmap_overlay_command)
(simple_overlay_update, expand_symtabs_matching)
(map_symbol_filenames): Update.
* symfile-debug.c (set_debug_symfile): Update.
* spu-tdep.c (spu_overlay_update, spu_objfile_from_frame):
Update.
* source.c (select_source_symtab, forget_cached_source_info):
Update.
* solib.c (solib_read_symbols): Update.
* solib-spu.c (append_ocl_sos): Update.
* psymtab.c (maintenance_print_psymbols)
(maintenance_info_psymtabs, maintenance_check_psymtabs): Update.
* probe.c (parse_probes_in_pspace, find_probe_by_pc): Update.
* printcmd.c (info_symbol_command): Update.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created):
Update.
* objfiles.h (class all_objfiles): Remove.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp, update_section_map)
(shared_objfile_contains_address_p)
(default_iterate_over_objfiles_in_search_order): Update.
* objc-lang.c (info_selectors_command, info_classes_command)
(find_methods): Update.
* minsyms.c (find_solib_trampoline_target): Update.
* maint.c (maintenance_info_sections)
(maintenance_translate_address, count_symtabs_and_blocks):
Update.
* main.c (captured_main_1): Update.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Update.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Update.
* jit.c (jit_find_objf_with_entry_addr): Update.
* hppa-tdep.c (find_unwind_entry)
(hppa_lookup_stub_minimal_symbol): Update.
* gcore.c (gcore_create_callback, objfile_find_memory_regions):
Update.
* elfread.c (elf_gnu_ifunc_resolve_by_cache)
(elf_gnu_ifunc_resolve_by_got): Update.
* dwarf2-frame.c (dwarf2_frame_find_fde): Update.
* dwarf-index-write.c (save_gdb_index_command): Update.
* cp-support.c (add_symbol_overload_list_qualified): Update.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Update.
* blockframe.c (find_pc_partial_function): Update.
* ada-lang.c (ada_lookup_simple_minsym, add_nonlocal_symbols)
(ada_collect_symbol_completion_matches)
(ada_add_global_exceptions): Update.
|
|
This removes the ALL_OBJSECTIONS macro, replacing its uses with ranged
for loops.
The special code in this macro for noticing a "break" from the inner
loop was only needed in a single place; so rather than try to
replicate this, I've simply replaced that use with a "goto".
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symfile.c (overlay_invalidate_all, find_pc_overlay)
(find_pc_mapped_section, list_overlays_command)
(map_overlay_command, unmap_overlay_command)
(simple_overlay_update): Use all_objfiles.
* spu-tdep.c (spu_overlay_update): Use all_objfiles.
* printcmd.c (info_symbol_command): Use all_objfiles.
* objfiles.h (ALL_OBJSECTIONS): Remove.
* maint.c (maintenance_translate_address): Use all_objfiles.
* gcore.c (gcore_create_callback): Use all_objfiles.
(objfile_find_memory_regions): Likewise.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This changes gdb to style addresses.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* ui-out.h (enum class ui_out_style_kind) <ADDRESS>: New
constant.
* ui-out.c (ui_out::field_core_addr): Add styling.
* stack.c (print_frame): Add styling.
* printcmd.c (print_address): Add styling.
(print_address_demangle, info_address_command): Likewise.
* cli/cli-style.h (address_style): Declare.
* cli/cli-style.c (address_style): New global.
(_initialize_cli_style): Register new commands.
* cli-out.c (cli_ui_out::do_field_string): Update.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Update test to check for address styling.
|
|
print_address_symbolic does not use ui-out, so it did not style
function names. This patch changes it to use the low-level style code
directly.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* printcmd.c (print_address_symbolic): Style function name.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add test for print_address_symbolic.
|
|
This adds style support for variable names. For the time being, this
is only done in backtraces, not in ptype or print; those places do not
use ui-out and so would need ad hoc changes.
This also adds styling to the names printed for local variables in
"backtrace full". This code does not use ui-out, so the styling is
done using the low-level API.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* ui-out.h (enum class ui_out_style_kind) <VARIABLE>: New global.
* stack.c (print_frame_arg): Style name.
* printcmd.c (print_variable_and_value): Style variable name.
* cli/cli-style.h (variable_name_style): Declare.
* cli/cli-style.c (variable_name_style): New global.
(_initialize_cli_style): Update.
* cli-out.c (cli_ui_out::do_field_string): Update.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add test for variable names.
|
|
This adds a function that can be used to reset terminal styles,
regardless of what style the low-level output routines currently think
is applied.
This is used to make "echo" and "printf" work properly when emitting
ANSI terminal escapes -- now gdb will reset the style at the end of
the command.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (reset_terminal_style): Declare.
* utils.c (can_emit_style_escape): New function.
(set_output_style): Use it.
(reset_terminal_style): New function.
* printcmd.c (printf_command): Call reset_terminal_style.
* cli/cli-cmds.c (echo_command): Call reset_terminal_style.
|
