| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace with equivalent method.
Change-Id: I0e033095e7358799930775e61028b48246971a7d
|
|
This turns symbol_arch into a method on symbol.
|
|
This turns symbol_objfile into a method on symbol.
|
|
Remove MSYMBOL_HAS_SIZE, MSYMBOL_SIZE and SET_MSYMBOL_SIZE, replace them
with equivalent methods.
Change-Id: I6ee1cf82df37e58dff52ea6568ceb4649c7d7538
|
|
Add a getter and a setter for a minimal symbol's type. Remove the
corresponding macro and adjust all callers.
Change-Id: I89900df5ffa5687133fe1a16b2e0d4684e67a77d
|
|
Remove all macros related to getting and setting some symbol value:
#define SYMBOL_VALUE(symbol) (symbol)->value.ivalue
#define SYMBOL_VALUE_ADDRESS(symbol) \
#define SET_SYMBOL_VALUE_ADDRESS(symbol, new_value) \
#define SYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes
#define SYMBOL_VALUE_COMMON_BLOCK(symbol) (symbol)->value.common_block
#define SYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block
#define SYMBOL_VALUE_CHAIN(symbol) (symbol)->value.chain
#define MSYMBOL_VALUE(symbol) (symbol)->value.ivalue
#define MSYMBOL_VALUE_RAW_ADDRESS(symbol) ((symbol)->value.address + 0)
#define MSYMBOL_VALUE_ADDRESS(objfile, symbol) \
#define BMSYMBOL_VALUE_ADDRESS(symbol) \
#define SET_MSYMBOL_VALUE_ADDRESS(symbol, new_value) \
#define MSYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes
#define MSYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block
Replace them with equivalent methods on the appropriate objects.
Change-Id: Iafdab3b8eefc6dc2fd895aa955bf64fafc59ed50
|
|
This patch removes gdb's dbx mode. Regression tested on x86-64 Fedora
34.
|
|
Various spots in gdb currently know about the wrap buffer, and so are
careful to call wrap_here to be certain that all output has been
flushed.
Now that the pager is just an ordinary stream, this isn't needed, and
a simple call to gdb_flush is enough.
Similarly, there are places where gdb prints to gdb_stderr, but first
flushes gdb_stdout. stderr_file already flushes gdb_stdout, so these
aren't needed.
|
|
fprintf_symbol_filtered is misnamed, because whether filtering happens
is now up to the stream. This renames it to fprintf_symbol, which
isn't a great name (the first "f" doesn't mean much and the second one
is truly meaningless here), but "print_symbol" was already taken.
|
|
Now that filtered and unfiltered output can be treated identically, we
can unify the printf family of functions. This is done under the name
"gdb_printf". Most of this patch was written by script.
|
|
Now that filtered and unfiltered output can be treated identically, we
can unify the puts family of functions. This is done under the name
"gdb_puts". Most of this patch was written by script.
|
|
This rewrites the output pager as a ui_file implementation.
A new header is introduced to declare the pager class. The
implementation remains in utils.c for the time being, because there
are some static globals there that must be used by this code. (This
could be cleaned up at some future date.)
I went through all the text output in gdb to ensure that this change
should be ok. There are a few cases:
* Any existing call to printf_unfiltered is required to be avoid the
pager. This is ensured directly in the implementation.
* All remaining calls to the f*_unfiltered functions -- the ones that
take an explicit ui_file -- either send to an unfiltered stream
(e.g., gdb_stderr), which is obviously ok; or conditionally send to
gdb_stdout
I investigated all such calls by searching for:
grep -e '\bf[a-z0-9_]*_unfiltered' *.[chyl] */*.[ch] | grep -v gdb_stdlog | grep -v gdb_stderr
This yields a number of candidates to check.
* The breakpoint _print_recreate family, and
save_trace_state_variables. These are used for "save" commands
and so are fine.
* Things printing to a temporary stream. Obviously ok.
* Disassembly selftests.
* print_gdb_help - this is non-obvious, but ok because paging isn't
yet enabled at this point during startup.
* serial.c - doens't use gdb_stdout
* The code in compile/. This is all printing to a file.
* DWARF DIE dumping - doesn't reference gdb_stdout.
* Calls to the _filtered form -- these are all clearly ok, because if
they are using gdb_stdout, then filtering will still apply; and if
not, then filtering never applied and still will not.
Therefore, at this point, there is no longer any distinction between
all the other _filtered and _unfiltered calls, and they can be
unified.
In this patch, take special note of the vfprintf_maybe_filtered and
ui_file::vprintf change. This is one instance of the above idea,
erasing the distinction between filtered and unfiltered -- in this
part of the change, the "unfiltered_output" flag is never passe to
cli_ui_out. Subsequent patches will go much further in this
direction.
Also note the can_emit_style_escape changes in ui-file.c. Checking
against gdb_stdout or gdb_stderr was always a bit of a hack; and now
it is no longer needed, because this is decision can be more fully
delegated to the particular ui_file implementation.
ui_file::can_page is removed, because this patch removed the only call
to it.
I think this is the main part of fixing PR cli/7234.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7234
|
|
Currently, "print/x" will display a floating-point value by first
casting it to an integer type. This yields weird results like:
(gdb) print/x 1.5
$1 = 0x1
This has confused users multiple times -- see PR gdb/16242, where
there are several dups. I've also seen some confusion from this
internally at AdaCore.
The manual says:
'x'
Regard the bits of the value as an integer, and print the integer
in hexadecimal.
... which seems more useful. So, perhaps what happened is that this
was incorrectly implemented (or maybe correctly implemented and then
regressed, as there don't seem to be any tests).
This patch fixes the bug.
There was a previous discussion where we agreed to preserve the old
behavior:
https://sourceware.org/legacy-ml/gdb-patches/2017-06/msg00314.html
However, I think it makes more sense to follow the manual.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16242
|
|
Add a getter and a setter for whether a symbol is an argument. Remove
the corresponding macro and adjust all callers.
Change-Id: I71b4f0465f3dfd2ed8b9e140bd3f7d5eb8d9ee81
|
|
Add a getter and a setter for whether a symbol is objfile owned. Remove
the corresponding macro and adjust all callers.
Change-Id: Ib7ef3718d65553ae924ca04c3fd478b0f4f3147c
|
|
Change-Id: I83211d5a47efc0564386e5b5ea4a29c00b1fd46a
|
|
This changes all existing calls to wrap_here to call the method on the
appropriate ui_file instead. The choice of ui_file is determined by
context.
|
|
I think it only really makes sense to call wrap_here with an argument
consisting solely of spaces. Given this, it seemed better to me that
the argument be an int, rather than a string. This patch is the
result. Much of it was written by a script.
|
|
In an earlier version of the pager rewrite series, it was important to
audit unfiltered output calls to see which were truly necessary.
This is no longer necessary, but it still seems like a decent cleanup
to change calls to avoid explicitly passing gdb_stdout. That is,
rather than using something like fprintf_unfiltered with gdb_stdout,
the code ought to use plain printf_unfiltered instead.
This patch makes this change. I went ahead and converted all the
_filtered calls I could find, as well, for the same clarity.
|
|
Many otherwise ordinary commands choose to use unfiltered output
rather than filtered. I don't think there's any reason for this, so
this changes many such commands to use filtered output instead.
Note that complete_command is not touched due to a comment there
explaining why unfiltered output is believed to be used.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
Change gdb_assert_not_reached to accept a format string plus
corresponding arguments. This allows giving more precise messages.
Because the format string passed by the caller is prepended with a "%s:"
to add the function name, the callers can no longer pass a translated
string (`_(...)`). Make the gdb_assert_not_reached include the _(),
just like the gdb_assert_fail macro just above.
Change-Id: Id0cfda5a57979df6cdaacaba0d55dd91ae9efee7
|
|
The bug fixed by this [1] patch was caused by an out-of-bounds access to
a value's content. The code gets the value's content (just a pointer)
and then indexes it with a non-sensical index.
This made me think of changing functions that return value contents to
return array_views instead of a plain pointer. This has the advantage
that when GDB is built with _GLIBCXX_DEBUG, accesses to the array_view
are checked, making bugs more apparent / easier to find.
This patch changes the return types of these functions, and updates
callers to call .data() on the result, meaning it's not changing
anything in practice. Additional work will be needed (which can be done
little by little) to make callers propagate the use of array_view and
reap the benefits.
[1] https://sourceware.org/pipermail/gdb-patches/2021-September/182306.html
Change-Id: I5151f888f169e1c36abe2cbc57620110673816f3
|
|
I believe that many calls to fprintf_symbol_filtered are incorrect.
In particular, there are some that pass a symbol's print name, like:
fprintf_symbol_filtered (gdb_stdout, sym->print_name (),
current_language->la_language, DMGL_ANSI);
fprintf_symbol_filtered uses the "demangle" global to decide whether
or not to demangle -- but print_name does this as well. This can lead
to double-demangling. Normally this could be innocuous, except I also
plan to change Ada demangling in a way that causes this to fail.
|
|
When the architecture supports memory tagging, we handle
pointer/reference types in a special way, so we can validate tags and
show mismatches.
Unfortunately, the currently implementation errors out when the user
prints non-address values: composite types, floats, references, member
functions and other things.
Vector registers:
(gdb) p $v0
Value can't be converted to integer.
Non-existent internal variables:
(gdb) p $foo
Value can't be converted to integer.
The same happens for complex types and printing struct/union types.
There are a few problems here.
The first one is that after print_command_1 evaluates the expression
to print, the tag validation code call value_as_address
unconditionally, without making sure we have have a suitable type
where it makes to sense to call it. That results in value_as_address
(if it isn't given a pointer-like type) trying to treat the value as
an integer and convert it to an address, which #1 - doesn't make sense
(i.e., no sense in validating tags after "print 1"), and throws for
non-integer-convertible types. We fix this by making sure we have a
pointer or reference type first, and only if so then proceed to check
if the address-like value has tags.
The second is that we're calling value_as_address even if we have an
optimized out or unavailable value, which throws, because the value's
contents aren't fully accessible/readable. This error currently
escapes out and aborts the print. This case is fixed by checking for
optimized out / unavailable explicitly.
Third, the tag checking process does not gracefully handle exceptions.
If any exception is thrown from the tag validation code, we abort the
print. E.g., the target may fail to access tags via a running thread.
Or the needed /proc files aren't available. Or some other untold
reason. This is a bit too rigid. This commit changes print_command_1
to catch errors, print them, and still continue with the normal
expression printing path instead of erroring out and printing nothing
useful.
With this patch, printing works correctly again:
(gdb) p $v0
$1 = {d = {f = {2.0546950501119882e-81, 2.0546950501119882e-81}, u = {3399988123389603631, 3399988123389603631}, s = {
3399988123389603631, 3399988123389603631}}, s = {f = {1.59329203e-10, 1.59329203e-10, 1.59329203e-10, 1.59329203e-10}, u = {
791621423, 791621423, 791621423, 791621423}, s = {791621423, 791621423, 791621423, 791621423}}, h = {bf = {1.592e-10,
1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10}, f = {0.11224, 0.11224, 0.11224, 0.11224, 0.11224,
0.11224, 0.11224, 0.11224}, u = {12079, 12079, 12079, 12079, 12079, 12079, 12079, 12079}, s = {12079, 12079, 12079, 12079,
12079, 12079, 12079, 12079}}, b = {u = {47 <repeats 16 times>}, s = {47 <repeats 16 times>}}, q = {u = {
62718710765820030520700417840365121327}, s = {62718710765820030520700417840365121327}}}
(gdb) p $foo
$2 = void
(gdb) p 2 + 2i
$3 = 2 + 2i
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28110
|
|
Convert these three macros to methods of obj_section. The problem fixed
by the following patch is caused by an out of bound access of the
objfile::section_offsets vector. Since this is deep in macros, we don't
get a clear backtrace and it's difficult to debug. Changing that to
methods means we can step in them and break on them.
Because their implementation requires knowing about struct objfile, move
struct obj_section below struct objfile in objfiles.h.
The obj_section_offset was used in one place as an lvalue to set
offsets, in machoread.c. Replace that with a set_offset method.
Add the objfile::section_offset and objfile::set_section_offset methods
to improve encapsulation (reduce other objects poking into struct
objfile's internals).
gdb/ChangeLog:
* objfiles.h (struct obj_section): Move down.
<offset, set_offset, addr, endaddr>: New.
(obj_section_offset, obj_section_addr, obj_section_endaddr),
replace all users to use obj_section methods.
(struct objfile) <section_offset, set_section_offset>: New.
Change-Id: I97e8fcae93ab2353fbdadcb4a5ec10d7949a7334
|
|
I spotted some indentation issues where we had some spaces followed by
tabs at beginning of line, that I wanted to fix. So while at it, I did
a quick grep to find and fix all I could find.
gdb/ChangeLog:
* Fix tab after space indentation issues throughout.
Change-Id: I1acb414dd9c593b474ae2b8667496584df4316fd
|
|
Same idea as previous patch, but for add_alias_cmd. Remove the overload
that accepts the target command as a string (the target command name),
leaving only the one that takes the cmd_list_element.
gdb/ChangeLog:
* command.h (add_alias_cmd): Accept target as
cmd_list_element. Update callers.
Change-Id: I546311f411e9e7da9302322d6ffad4e6c56df266
|
|
The alias creation functions currently accept a name to specify the
target command. They pass this to add_alias_cmd, which needs to lookup
the target command by name.
Given that:
- We don't support creating an alias for a command before that command
exists.
- We always use add_info_alias just after creating that target command,
and therefore have access to the target command's cmd_list_element.
... change add_com_alias to accept the target command as a
cmd_list_element (other functions are done in subsequent patches). This
ensures we don't create the alias before the target command, because you
need to get the cmd_list_element from somewhere when you call the alias
creation function. And it avoids an unecessary command lookup. So it
seems better to me in every aspect.
gdb/ChangeLog:
* command.h (add_com_alias): Accept target as
cmd_list_element. Update callers.
Change-Id: I24bed7da57221cc77606034de3023fedac015150
|
|
Previously, the prefixname field of struct cmd_list_element was manually
set for prefix commands. This seems verbose and error prone as it
required every single call to functions adding prefix commands to
specify the prefix name while the same information can be easily
generated.
Historically, this was not possible as the prefix field was null for
many commands, but this was fixed in commit
3f4d92ebdf7f848b5ccc9e8d8e8514c64fde1183 by Philippe Waroquiers, so
we can rely on the prefix field being set when generating the prefix
name.
This commit also fixes a use after free in this scenario:
* A command gets created via Python (using the gdb.Command class).
The prefix name member is dynamically allocated.
* An alias to the new command is created. The alias's prefixname is set
to point to the prefixname for the original command with a direct
assignment.
* A new command with the same name as the Python command is created.
* The object for the original Python command gets freed and its
prefixname gets freed as well.
* The alias is updated to point to the new command, but its prefixname
is not updated so it keeps pointing to the freed one.
gdb/ChangeLog:
* command.h (add_prefix_cmd): Remove the prefixname argument as
it can now be generated automatically. Update all callers.
(add_basic_prefix_cmd): Ditto.
(add_show_prefix_cmd): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_abbrev_prefix_cmd): Ditto.
* cli/cli-decode.c (add_prefix_cmd): Ditto.
(add_basic_prefix_cmd): Ditto.
(add_show_prefix_cmd): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_abbrev_prefix_cmd): Ditto.
* cli/cli-decode.h (struct cmd_list_element): Replace the
prefixname member variable with a method which generates the
prefix name at runtime. Update all code reading the prefix
name to use the method, and remove all code setting it.
* python/py-cmd.c (cmdpy_destroyer): Remove code to free the
prefixname member as it's now a method.
(cmdpy_function): Determine if the command is a prefix by
looking at prefixlist, not prefixname.
|
|
Give a name to each observer, this will help produce more meaningful
debug message.
gdbsupport/ChangeLog:
* observable.h (class observable) <struct observer> <observer>:
Add name parameter.
<name>: New field.
<attach>: Add name parameter, update all callers.
Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0
|
|
GDB was crashing in "bt full" for a large Ada program. I tracked this
down to a combination of bugs.
The first bug, fixed here, is that print_variable_and_value calls
common_val_print. Normally only the value-printing implementation
should call this; from the top level, common_val_print_checked is
preferred, because it correctly handles values that are wholly
optimized out.
I wasn't able to write a test case for this.
gdb/ChangeLog
2021-04-15 Tom Tromey <tromey@adacore.com>
* printcmd.c (print_variable_and_value): Use
common_val_print_checked.
|
|
Extend the "x" and "print" commands to make use of memory tagging
functionality, if supported by the architecture.
The "print" command will point out any possible tag mismatches it finds
when dealing with pointers, in case such a pointer is tagged. No additional
modifiers are needed.
Suppose we have a pointer "p" with value 0x1234 (logical tag 0x0) and that we
have an allocation tag of 0x1 for that particular area of memory. This is the
expected output:
(gdb) p/x p
Logical tag (0x0) does not match the allocation tag (0x1).
$1 = 0x1234
The "x" command has a new 'm' modifier that will enable displaying of
allocation tags alongside the data dump. It will display one allocation
tag per line.
AArch64 has a tag granule of 16 bytes, which means we can have one tag for
every 16 bytes of memory. In this case, this is what the "x" command will
display with the new 'm' modifier:
(gdb) x/32bxm p
<Allocation Tag 0x1 for range [0x1230,0x1240)>
0x1234: 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00
0x123c: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
<Allocation Tag 0x1 for range [0x1240,0x1250)>
0x1244: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x124c: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
(gdb) x/4gxm a
<Allocation Tag 0x1 for range [0x1230,0x1240)>
0x1234: 0x0000000000000201 0x0000000000000000
<Allocation Tag 0x1 for range [0x1240,0x1250)>
0x1244: 0x0000000000000000 0x0000000000000000
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* printcmd.c (decode_format): Handle the 'm' modifier.
(do_examine): Display allocation tags when required/supported.
(should_validate_memtags): New function.
(print_command_1): Display memory tag mismatches.
* valprint.c (show_memory_tag_violations): New function.
(value_print_option_defs): Add new option "memory-tag-violations".
(user_print_options) <memory_tag_violations>: Initialize to 1.
* valprint.h (struct format_data) <print_tags>: New field.
(value_print_options) <memory_tag_violations>: New field.
gdb/testsuite/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* gdb.base/options.exp: Adjust for new print options.
* gdb.base/with.exp: Likewise.
|
|
Add new commands under the "memory-tag" prefix to allow users to inspect,
modify and check memory tags in different ways.
The available subcommands are the following:
- memory-tag print-logical-tag <expression>: Prints the logical tag for a
particular address.
- memory-tag withltag <expression> <tag>: Prints the address tagged with the
logical tag <tag>.
- memory-tag print-allocation-tag <expression>: Prints the allocation tag for
a particular address.
- memory-tag setatag <expression> <length> <tags>: Sets one or more allocation
tags to the specified tags.
- memory-tag check <expression>: Checks if the logical tag in <address>
matches its allocation tag.
These commands make use of the memory tagging gdbarch methods, and are still
available, but disabled, when memory tagging is not supported by the
architecture.
I've pondered about a way to make these commands invisible when memory tagging
is not available, but given the check is at runtime (and support may come and go
based on a process' configuration), that is a bit too late in the process to
either not include the commands or get rid of them.
Ideas are welcome.
gdb/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* printcmd.c: Include gdbsupport/rsp-low.h.
(memory_tag_list): New static global.
(process_print_command_args): Factored out of
print_command_1.
(print_command_1): Use process_print_command_args.
(show_addr_not_tagged, show_memory_tagging_unsupported)
(memory_tag_command, memory_tag_print_tag_command)
(memory_tag_print_logical_tag_command)
(memory_tag_print_allocation_tag_command, parse_with_logical_tag_input)
(memory_tag_with_logical_tag_command, parse_set_allocation_tag_input)
(memory_tag_set_allocation_tag_command, memory_tag_check_command): New
functions.
(_initialize_printcmd): Add "memory-tag" prefix and subcommands.
gdbsupport/ChangeLog:
2021-03-24 Luis Machado <luis.machado@linaro.org>
* rsp-low.cc (fromhex, hex2bin): Move to ...
* common-utils.cc: ... here.
(fromhex) Change error message text to not be RSP-specific.
* rsp-low.h (fromhex, hex2bin): Move to ...
* common-utils.h: ... here.
|
|
When not parsing for completion, parse_expression ensures that the
resulting expression has operations. This patch removes a couple of
unnecessary checks for this situation.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* printcmd.c (set_command): Remove null check.
* value.c (init_if_undefined_command): Remove null check.
|
|
This removes union exp_element functions that either create such
elements or walk them. struct expression no longer holds
exp_elements. A couple of language_defn methods are also removed, as
they are obsolete.
Note that this patch also removes the print_expression code. The only
in-tree caller of this was from dump_prefix_expression, which is only
called when expression debugging is enabled. Implementing this would
involve a fair amount of code, and it seems to me that prefix dumping
is preferable anyway, as it is unambiguous. So, I have not
reimplemented this feature.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* value.h (evaluate_subexp_with_coercion): Don't declare.
* parse.c (exp_descriptor_standard): Remove.
(expr_builder::expr_builder, expr_builder::release): Update.
(expression::expression): Remove size_t parameter.
(expression::~expression): Simplify.
(expression::resize): Remove.
(write_exp_elt, write_exp_elt_opcode, write_exp_elt_sym)
(write_exp_elt_msym, write_exp_elt_block, write_exp_elt_objfile)
(write_exp_elt_longcst, write_exp_elt_floatcst)
(write_exp_elt_type, write_exp_elt_intern, write_exp_string)
(write_exp_string_vector, write_exp_bitstring): Remove.
* p-lang.h (class pascal_language) <opcode_print_table,
op_print_tab>: Remove.
* p-lang.c (pascal_language::op_print_tab): Remove.
* opencl-lang.c (class opencl_language) <opcode_print_table>:
Remove.
* objc-lang.c (objc_op_print_tab): Remove.
(class objc_language) <opcode_print_table>: Remove.
* m2-lang.h (class m2_language) <opcode_print_table,
op_print_tab>: Remove.
* m2-lang.c (m2_language::op_print_tab): Remove.
* language.h (struct language_defn) <post_parser, expression_ops,
opcode_print_table>: Remove.
* language.c (language_defn::expression_ops)
(auto_or_unknown_language::opcode_print_table): Remove.
* go-lang.h (class go_language) <opcode_print_table,
op_print_tab>: Remove.
* go-lang.c (go_language::op_print_tab): Remove.
* f-lang.h (class f_language) <opcode_print_table>: Remove
<op_print_tab>: Remove.
* f-lang.c (f_language::op_print_tab): Remove.
* expression.h (union exp_element): Remove.
(struct expression): Remove size_t parameter from constructor.
<resize>: Remove.
<first_opcode>: Update.
<nelts, elts>: Remove.
(EXP_ELEM_TO_BYTES, BYTES_TO_EXP_ELEM): Remove.
(evaluate_subexp_standard, print_expression, op_string)
(dump_raw_expression): Don't declare.
* expprint.c (print_expression, print_subexp)
(print_subexp_funcall, print_subexp_standard, op_string)
(dump_raw_expression, dump_subexp, dump_subexp_body)
(dump_subexp_body_funcall, dump_subexp_body_standard): Remove.
(dump_prefix_expression): Update.
* eval.c (evaluate_subexp): Remove.
(evaluate_expression, evaluate_type): Update.
(evaluate_subexpression_type): Remove.
(fetch_subexp_value): Remove "pc" parameter. Update.
(extract_field_op, evaluate_struct_tuple, evaluate_funcall)
(evaluate_subexp_standard, evaluate_subexp_for_address)
(evaluate_subexp_with_coercion, evaluate_subexp_for_sizeof)
(evaluate_subexp_for_cast): Remove.
(parse_and_eval_type): Update.
* dtrace-probe.c (dtrace_probe::compile_to_ax): Update.
* d-lang.c (d_op_print_tab): Remove.
(class d_language) <opcode_print_table>: Remove.
* c-lang.h (c_op_print_tab): Don't declare.
* c-lang.c (c_op_print_tab): Remove.
(class c_language, class cplus_language, class asm_language, class
minimal_language) <opcode_print_table>: Remove.
* breakpoint.c (update_watchpoint, watchpoint_check)
(watchpoint_exp_is_const, watch_command_1): Update.
* ax-gdb.h (union exp_element): Don't declare.
* ax-gdb.c (const_var_ref, const_expr, maybe_const_expr)
(gen_repeat, gen_sizeof, gen_expr_for_cast, gen_expr)
(gen_expr_binop_rest): Remove.
(gen_trace_for_expr, gen_eval_for_expr, gen_printf): Update.
* ada-lang.c (ada_op_print_tab): Remove.
(class ada_language) <post_parser, opcode_print_table>: Remove.
|
|
This adds an expr::operation_up to struct expression, and then
modifies various parts of GDB to use this member when it is non-null.
The list of such spots was a bit surprising to me, and found only
after writing most of the code and then noticing what no longer
compiled.
In a few spots, new accessor methods are added to operation
subclasses, so that code that dissects an expression will work with
the new scheme.
After this change, code that constructs an expression can be switched
to the new form without breaking.
gdb/ChangeLog
2021-03-08 Tom Tromey <tom@tromey.com>
* ada-exp.h (class ada_var_value_operation) <get_symbol>: Remove;
now in superclass.
* value.h (fetch_subexp_value): Add "op" parameter.
* value.c (init_if_undefined_command): Update.
* tracepoint.c (validate_actionline, encode_actions_1): Update.
* stap-probe.c (stap_probe::compile_to_ax): Update.
* printcmd.c (set_command): Update.
* ppc-linux-nat.c (ppc_linux_nat_target::check_condition):
Update.
* parser-defs.h (struct expr_builder) <set_operation>: New
method.
* parse.c (parse_exp_in_context, exp_uses_objfile): Update.
* expression.h (struct expression) <first_opcode>: Update.
<op>: New member.
* expprint.c (dump_raw_expression, dump_prefix_expression):
Update.
* expop.h (class var_value_operation) <get_symbol>: New method.
(class register_operation) <get_name>: New method.
(class equal_operation): No longer a typedef, now a subclass.
(class unop_memval_operation) <get_type>: New method.
(class assign_operation) <get_lhs>: New method.
(class unop_cast_operation) <get_type>: New method.
* eval.c (evaluate_expression, evaluate_type)
(evaluate_subexpression_type): Update.
(fetch_subexp_value): Add "op" parameter.
(parse_and_eval_type): Update.
* dtrace-probe.c (dtrace_probe::compile_to_ax): Update.
* breakpoint.c (update_watchpoint, watchpoint_check)
(watchpoint_exp_is_const, watch_command_1): Update.
* ax-gdb.c (gen_trace_for_expr, gen_eval_for_expr, gen_printf):
Update.
|
|
Add a new obj_section function to bound_minimal_symbol, this just
calls obj_section on the contained minimal_symbol passing in the
contained objfile.
This allows some minor code simplification in a few places.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* breakpoint.c (resolve_sal_pc): Make use of
bound_minimal_symbol::obj_section.
* maint.c (maintenance_translate_address): Likewise.
* minsyms.c (minimal_symbol_upper_bound): Likewise.
* minsyms.h (struct bound_minimal_symbol) <obj_section>: New
member function.
* printcmd.c (info_address_command): Make use of
bound_minimal_symbol::obj_section.
|
|
Replace the two macros SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTION with
a member function on general_symbol_info.
There should be no user visible change after this commit.
gdb/ChangeLog:
* breakpoint.c (resolve_sal_pc): Replace SYMBOL_OBJ_SECTION and
MSYMBOL_OBJ_SECTION.
* findvar.c (language_defn::read_var_value): Likewise.
* infcmd.c (jump_command): Likewise.
* linespec.c (minsym_found): Likewise.
* maint.c (maintenance_translate_address): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Likewise.
(minimal_symbol_upper_bound): Likewise.
* parse.c (find_minsym_type_and_address): Likewise.
(operator_check_standard): Likewise.
* printcmd.c (info_address_command): Likewise.
* symmisc.c (dump_msymbols): Likewise.
(print_symbol): Likewise.
* symtab.c (general_symbol_info::obj_section): Define new
function.
(fixup_symbol_section): Replace SYMBOL_OBJ_SECTION.
(find_pc_sect_compunit_symtab): Likewise.
(find_function_start_sal): Likewise.
(skip_prologue_sal): Replace SYMBOL_OBJ_SECTION and
MSYMBOL_OBJ_SECTION.
* symtab.h (struct general_symbol_info) <obj_section>: Declare new
function.
(SYMBOL_OBJ_SECTION): Delete.
(MSYMBOL_OBJ_SECTION): Delete.
|
|
... and update all users.
gdb/ChangeLog:
* gdbtypes.h (get_type_arch): Rename to...
(struct type) <arch>: ... this, update all users.
Change-Id: I0e3ef938a0afe798ac0da74a9976bbd1d082fc6f
|
|
An earlier patch pointed out that nothing in GDB sets void_context_p
when parsing an expression. This patch fixes this omission.
"print" and "call" differ in that the former will print a value that
has void type, while the latter will not. AdaCore has had a patch for
a long time that uses this distinction to help with overload
resolution. In particular, in a "call" context, a procedure will be
chosen, while in a "print" context, a zero-argument function will be
chosen instead.
Regression tested on x86-64 Fedora 32.
gdb/ChangeLog
2021-01-08 Tom Tromey <tromey@adacore.com>
* parse.c (parse_expression): Add void_context_p parameter. Use
parse_exp_in_context.
* printcmd.c (print_command_1): Change voidprint to bool. Pass to
parse_expression.
(print_command, call_command): Update.
* expression.h (parse_expression): Add void_context_p parameter.
gdb/testsuite/ChangeLog
2021-01-08 Tom Tromey <tromey@adacore.com>
* gdb.ada/voidctx/pck.adb: New file.
* gdb.ada/voidctx/pck.ads: New file.
* gdb.ada/voidctx/voidctx.adb: New file.
* gdb.ada/voidctx.exp: New file.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
While removing printfi_filtered, I found a spot that used n_spaces
where the now-ordinary "%*s" approach would do. This patch makes this
change.
Tested on x86-64 Fedora 32.
gdb/ChangeLog
2020-12-17 Tom Tromey <tromey@adacore.com>
* printcmd.c (print_variable_and_value): Don't use n_spaces.
|
|
In commit:
commit 037d7135de575c9e0c20e9158c105979bfee339c
Date: Mon Nov 16 11:36:56 2020 +0000
gdb: improve command completion for 'print', 'x', and 'display'
A potential use of an uninitialised variable was introduced. This is
fixed in this commit.
Previously when analysing /FMT strings for tab completion we
considered two possibilities, either the user has typed '/', or the
user has typed '/' followed by an alpha-numeric character, as these
are the only valid FMT string characters.
This meant that if the user type, for example '/@' and then tried to
tab complete gdb would use an uninitialised variable.
Currently only the first character after the '/' is checked to see if
it is alpha-numeric, so if a user typed '/x@@' then gdb would be happy
to treat this as a FMT string.
Given the goal of this change was primarily to allow tab completion of
symbols later in the command when a /FMT was used then I decided to
just make the /FMT skipping less smart. Now any characters after the
'/' up to the first white space, will be treated as a FMT string.
gdb/ChangeLog:
* printcmd.c (skip_over_slash_fmt): Reorder code to ensure in_fmt
is always initialized.
|
|
Some late feedback on this commit:
commit 037d7135de575c9e0c20e9158c105979bfee339c
Date: Mon Nov 16 11:36:56 2020 +0000
gdb: improve command completion for 'print', 'x', and 'display'
Suggested making use of the skip_to_space and skip_spaces helper
functions. There should be no user visible changes after this commit.
gdb/ChangeLog:
* printcmd.c (skip_over_slash_fmt): Make use of skip_to_space and
skip_spaces.
|
|
The /FMT specification on the print command currently breaks command
completion, so:
(gdb) p var.<TAB><TAB>
.... list of fields in var .....
But,
(gdb) p/d var.<TAB><TAB>
..... list of all symbols .....
After this commit this issue is now resolved.
There are some other details around tab-completion and /FMT which
hopefully this commit improves. So, before:
(gdb) p/<TAB><TAB>
.... lists all symbols .....
After:
(gdb) p/<TAB><TAB> # Nothing changes...
The thinking here is that after a / the user must type a FMT, but we
don't offer tab completion on FMT characters. Placing a symbol
directly after a / will not do what the user expects, so offering that
seems wrong.
Similarly, before we had:
(gdb) p/d<TAB><TAB>
... lists all symbols starting with 'd' ....
But afterwards:
(gdb) p/d<TAB><TAB> # Adds a single space, so we get:
(gdb) p/d <CURSOR>
As before, typing a symbol where FMT is expected will not do what the
user expects. If the user has added a FMT string then upon tab
completion GDB assumes the FMT string is complete and prepares the
user to type an expression.
In this commit I have also added completion functions for the 'x' and
'display' commands. These commands also support /FMT specifiers and
so share some code with 'print'.
gdb/ChangeLog:
* printcmd.c: Include 'safe-ctype.c'.
(skip_over_slash_fmt): New function.
(print_command_completer): Call skip_over_slash_fmt.
(display_and_x_command_completer): New function.
(_initialize_printcmd): Add command completion for 'x' and
'display'.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Add new tests.
|
|
Consider a fixed-point type such the scaling factor is 1/16,
as the following Ada code snippet would create:
type FP1_Type is delta 0.1 range -1.0 .. +1.0;
FP1_Var : FP1_Type := 0.25;
Printing the value of this variable with a format modifier yields
the wrong value. E.g.:
(gdb) p /x fp1_var
$6 = 0x4
Since the real value is 0.25, we therefore expected...
(gdb) p /x fp1_var
$6 = 0x0
What happens, in this case, is that the value being printed is
actually the "raw" value of our object, before the scaling factor
gets applied.
This commit fixes the issue by using approach as for float values,
where we convert the value into an integer value, prior to printing,
knowing that the conversion takes the scaling factor into account.
gdb/ChangeLog:
* printcmd.c (print_scalar_formatted): Add fixed-point type
handling when options->format is set.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-fixed-point.exp: Add "print /x" tests.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
When printing void results without any format letter, they are output
as expected:
(gdb) p $abcd
$1 = void
(gdb) p (void)10
$2 = void
But if any format letter (besides s) is used, it always outputs zero:
(gdb) p/x $abcd
$3 = 0x0
(gdb) p/x (void)10
$4 = 0x0
So this adds void results to the types handled like unformatted prints.
gdb/ChangeLog:
2020-10-09 Hannes Domani <ssbssa@yahoo.de>
PR exp/26714
* printcmd.c (print_formatted): Handle void results as
unformatted prints.
gdb/testsuite/ChangeLog:
2020-10-09 Hannes Domani <ssbssa@yahoo.de>
PR exp/26714
* gdb.base/printcmds.exp: Add tests for void results.
|
|
PR symtab/25470 points out that the Zig programming language allows
integers of various bit sizes (including zero), not just sizes that
are a multiple of 8.
This is supported in DWARF by applying both a byte size and a
DW_AT_bit_size.
This patch adds support for this feature to integer and boolean types.
Other base types are not handled -- for floating-point types, this
didn't seem to make sense, and for character types I didn't see much
need. (These can be added later if desired.)
I've also added support for DW_AT_data_bit_offset at the same time. I
don't know whether the Zig compiler requires this, but it was
described in the same section in the DWARF standard and was easy to
add.
A new test case is supplied, using the DWARF assembler.
gdb/ChangeLog
2020-09-23 Tom Tromey <tom@tromey.com>
PR symtab/25470:
* value.c (unpack_long, pack_long, pack_unsigned_long): Handle bit
offset and bit size.
* printcmd.c (print_scalar_formatted): Handle zero-length
integer.
(print_scalar_formatted): Use bit_size_differs_p.
* gdbtypes.h (enum type_specific_kind) <TYPE_SPECIFIC_INT>: New
constant.
(union type_specific): <int_stuff>: New member.
(struct type) <bit_size_differs_p, bit_size, bit_offset>: New
methods.
* gdbtypes.c (init_integer_type, init_boolean_type): Initialize
TYPE_SPECIFIC_FIELD.
(recursive_dump_type, copy_type_recursive): Update.
* dwarf2/read.c (read_base_type): Handle DW_AT_bit_size and
DW_AT_data_bit_offset.
gdb/testsuite/ChangeLog
2020-09-23 Tom Tromey <tom@tromey.com>
* gdb.dwarf2/intbits.exp: New file.
* gdb.dwarf2/intbits.c: New file.
|
