aboutsummaryrefslogtreecommitdiff
path: root/gdb/ppc-linux-nat.c
AgeCommit message (Collapse)AuthorFilesLines
2024-06-21[gdb/tdep] Fix gdb.base/watchpoint-running.exp on {arm,ppc64le}-linuxPedro Alves1-0/+15
When running test-case gdb.base/watchpoint-running on ppc64le-linux (and similar on arm-linux), we get: ... (gdb) watch global_var^M warning: Error when detecting the debug register interface. \ Debug registers will be unavailable.^M Watchpoint 2: global_var^M (gdb) FAIL: $exp: all-stop: hardware: watch global_var FAIL: $exp: all-stop: hardware: watchpoint hit (timeout) ... The problem is that ppc_linux_dreg_interface::detect fails to detect the hardware watchpoint interface, because the calls to ptrace return with errno set to ESRCH. This is a feature of ptrace: if a call is done while the tracee is not ptrace-stopped, it returns ESRCH. Indeed, in the test-case "watch global_var" is executed while the inferior is running, and that triggers the first call to ppc_linux_dreg_interface::detect. And because the detection failure is cached, subsequent attempts at setting hardware watchpoints will also fail, even if the tracee is ptrace-stopped. The way to fix this is to make sure that ppc_linux_dreg_interface::detect is called when we know that the thread is ptrace-stopped, which in the current setup is best addressed by using target-specific post_attach and post_startup_inferior overrides. However, as we can see in aarch64_linux_nat_target, that causes code duplication. Fix this by: - defining a new target hook low_init_process, called from linux_init_ptrace_procfs, which is called from both linux_nat_target::post_attach and linux_nat_target::post_startup_inferior, - adding implementations for ppc_linux_nat_target and arm_linux_nat_target that detect the hardware watchpoint interface, - replacing the aarch64_linux_nat_target implementations of post_attach and post_startup_inferior with a low_init_process implementation. Tested on ppc64le-linux, arm-linux, aarch64-linux and x86_64-linux. Co-Authored-By: Tom de Vries <tdevries@suse.de> Approved-By: Luis Machado <luis.machado@arm.com> PR tdep/31834 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31834 PR tdep/31705 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31705
2024-04-22gdb: move store/extract integer functions to extract-store-integer.{c,h}Simon Marchi1-0/+1
Move the declarations out of defs.h, and the implementations out of findvar.c. I opted for a new file, because this functionality of converting integers to bytes and vice-versa seems a bit to generic to live in findvar.c. Change-Id: I524858fca33901ee2150c582bac16042148d2251 Approved-By: John Baldwin <jhb@FreeBSD.org>
2024-03-26gdb, gdbserver, gdbsupport: remove includes of early headersSimon Marchi1-1/+0
Now that defs.h, server.h and common-defs.h are included via the `-include` option, it is no longer necessary for source files to include them. Remove all the inclusions of these files I could find. Update the generation scripts where relevant. Change-Id: Ia026cff269c1b7ae7386dd3619bc9bb6a5332837 Approved-By: Pedro Alves <pedro@palves.net>
2024-02-26gdb: Modify the output of "info breakpoints" and "delete breakpoints"Tiezhu Yang1-2/+2
The output of "info breakpoints" includes breakpoint, watchpoint, tracepoint, and catchpoint if they are created, so it should show all the four types are deleted in the output of "info breakpoints" to report empty list after "delete breakpoints". It should also change the output of "delete breakpoints" to make it clear that watchpoints, tracepoints, and catchpoints are also being deleted. This is suggested by Guinevere Larsen, thank you. $ make check-gdb TESTS="gdb.base/access-mem-running.exp" $ gdb/gdb gdb/testsuite/outputs/gdb.base/access-mem-running/access-mem-running [...] (gdb) break main Breakpoint 1 at 0x12000073c: file /home/loongson/gdb.git/gdb/testsuite/gdb.base/access-mem-running.c, line 32. (gdb) watch global_counter Hardware watchpoint 2: global_counter (gdb) trace maybe_stop_here Tracepoint 3 at 0x12000071c: file /home/loongson/gdb.git/gdb/testsuite/gdb.base/access-mem-running.c, line 27. (gdb) catch fork Catchpoint 4 (fork) (gdb) info breakpoints Num Type Disp Enb Address What 1 breakpoint keep y 0x000000012000073c in main at /home/loongson/gdb.git/gdb/testsuite/gdb.base/access-mem-running.c:32 2 hw watchpoint keep y global_counter 3 tracepoint keep y 0x000000012000071c in maybe_stop_here at /home/loongson/gdb.git/gdb/testsuite/gdb.base/access-mem-running.c:27 not installed on target 4 catchpoint keep y fork Without this patch: (gdb) delete breakpoints Delete all breakpoints? (y or n) y (gdb) info breakpoints No breakpoints or watchpoints. (gdb) info breakpoints 3 No breakpoint or watchpoint matching '3'. With this patch: (gdb) delete breakpoints Delete all breakpoints, watchpoints, tracepoints, and catchpoints? (y or n) y (gdb) info breakpoints No breakpoints, watchpoints, tracepoints, or catchpoints. (gdb) info breakpoints 3 No breakpoint, watchpoint, tracepoint, or catchpoint matching '3'. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Approved-by: Kevin Buettner <kevinb@redhat.com> Reviewed-By: Eli Zaretskii <eliz@gnu.org>
2024-01-12Update copyright year range in header of all files managed by GDBAndrew Burgess1-1/+1
This commit is the result of the following actions: - Running gdb/copyright.py to update all of the copyright headers to include 2024, - Manually updating a few files the copyright.py script told me to update, these files had copyright headers embedded within the file, - Regenerating gdbsupport/Makefile.in to refresh it's copyright date, - Using grep to find other files that still mentioned 2023. If these files were updated last year from 2022 to 2023 then I've updated them this year to 2024. I'm sure I've probably missed some dates. Feel free to fix them up as you spot them.
2023-11-28[gdb] Fix segfault in for_each_block, part 2Tom de Vries1-0/+2
The previous commit describes PR gdb/30547, a segfault when running test-case gdb.base/vfork-follow-parent.exp on powerpc64 (likewise on s390x). The root cause for the segmentation fault is that linux_is_uclinux gives an incorrect result: it returns true instead of false. So, why does linux_is_uclinux: ... int linux_is_uclinux (void) { CORE_ADDR dummy; return (target_auxv_search (AT_NULL, &dummy) > 0 && target_auxv_search (AT_PAGESZ, &dummy) == 0); ... return true? This is because ppc_linux_target_wordsize returns 4 instead of 8, causing ppc_linux_nat_target::auxv_parse to misinterpret the auxv vector. So, why does ppc_linux_target_wordsize: ... int ppc_linux_target_wordsize (int tid) { int wordsize = 4; /* Check for 64-bit inferior process. This is the case when the host is 64-bit, and in addition the top bit of the MSR register is set. */ long msr; errno = 0; msr = (long) ptrace (PTRACE_PEEKUSER, tid, PT_MSR * 8, 0); if (errno == 0 && ppc64_64bit_inferior_p (msr)) wordsize = 8; return wordsize; } ... return 4? Specifically, we get this result because because tid == 0, so we get errno == ESRCH. The tid == 0 is caused by the switch_to_no_thread in handle_vfork_child_exec_or_exit: ... /* Switch to no-thread while running clone_program_space, so that clone_program_space doesn't want to read the selected frame of a dead process. */ scoped_restore_current_thread restore_thread; switch_to_no_thread (); inf->pspace = new program_space (maybe_new_address_space ()); ... but moving the maybe_new_address_space call to before that gives us the same result. The tid is no longer 0, but we still get ESRCH because the thread has exited. Fix this in handle_vfork_child_exec_or_exit by doing the maybe_new_address_space call in the context of the vfork parent. Tested on top of trunk on x86_64-linux and ppc64le-linux. Tested on top of gdb-14-branch on ppc64-linux. Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca> PR gdb/30547 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30547
2023-11-21gdb: Replace gdb::optional with std::optionalLancelot Six1-2/+2
Since GDB now requires C++17, we don't need the internally maintained gdb::optional implementation. This patch does the following replacing: - gdb::optional -> std::optional - gdb::in_place -> std::in_place - #include "gdbsupport/gdb_optional.h" -> #include <optional> This change has mostly been done automatically. One exception is gdbsupport/thread-pool.* which did not use the gdb:: prefix as it already lives in the gdb namespace. Change-Id: I19a92fa03e89637bab136c72e34fd351524f65e9 Approved-By: Tom Tromey <tom@tromey.com> Approved-By: Pedro Alves <pedro@palves.net>
2023-10-10gdb: remove target_gdbarchSimon Marchi1-1/+1
This function is just a wrapper around the current inferior's gdbarch. I find that having that wrapper just obscures where the arch is coming from, and that it's often used as "I don't know which arch to use so I'll use this magical target_gdbarch function that gets me an arch" when the arch should in fact come from something in the context (a thread, objfile, symbol, etc). I think that removing it and inlining `current_inferior ()->arch ()` everywhere will make it a bit clearer where that arch comes from and will trigger people into reflecting whether this is the right place to get the arch or not. Change-Id: I79f14b4e4934c88f91ca3a3155f5fc3ea2fadf6b Reviewed-By: John Baldwin <jhb@FreeBSD.org> Approved-By: Andrew Burgess <aburgess@redhat.com>
2023-07-14*-linux-nat: Handle null inferior in read_description.John Baldwin1-0/+3
Don't invoke ptrace in the target read_description method if there is not an active inferior to query via ptrace. Instead, use the default register set for the architecture. Previously the native target could report an error from a failed ptrace operation when fetching a tdesc without an attached process. For example on Linux x86-64: (gdb) target native Done. Use the "run" command to start a process. (gdb) unset tdesc filename Couldn't get CS register: No such process.
2023-06-05[gdb] Fix grammar in comments and docsTom de Vries1-1/+1
Fix grammar in some comments and docs: - machines that doesn't -> machines that don't - its a -> it's a - its the -> it's the - if does its not -> if it does it's not - one more instructions if doesn't match -> one more instruction if it doesn't match - it's own -> its own - it's first -> its first - it's pointer -> its pointer I also came across "it's performance" in gdb/stubs/*-stub.c in the HP public domain notice, I've left that alone. Tested on x86_64-linux.
2023-06-05[gdb] Fix more typosTom de Vries1-3/+3
Fix some more typos: - distinquish -> distinguish - actualy -> actually - singe -> single - frash -> frame - chid -> child - dissassembler -> disassembler - uninitalized -> uninitialized - precontidion -> precondition - regsiters -> registers - marge -> merge - sate -> state - garanteed -> guaranteed - explictly -> explicitly - prefices (nonstandard plural) -> prefixes - bondary -> boundary - formated -> formatted - ithe -> the - arrav -> array - coresponding -> corresponding - owend -> owned - fials -> fails - diasm -> disasm - ture -> true - tpye -> type There's one code change, the name of macro SIG_CODE_BONDARY_FAULT changed to SIG_CODE_BOUNDARY_FAULT. Tested on x86_64-linux.
2023-06-03[gdb] Fix typosTom de Vries1-2/+2
Fix a few typos: - implemention -> implementation - convertion(s) -> conversion(s) - backlashes -> backslashes - signoring -> ignoring - (un)ambigious -> (un)ambiguous - occured -> occurred - hidding -> hiding - temporarilly -> temporarily - immediatelly -> immediately - sillyness -> silliness - similiar -> similar - porkuser -> pokeuser - thats -> that - alway -> always - supercede -> supersede - accomodate -> accommodate - aquire -> acquire - priveleged -> privileged - priviliged -> privileged - priviledges -> privileges - privilige -> privilege - recieve -> receive - (p)refered -> (p)referred - succesfully -> successfully - successfuly -> successfully - responsability -> responsibility - wether -> whether - wich -> which - disasbleable -> disableable - descriminant -> discriminant - construcstor -> constructor - underlaying -> underlying - underyling -> underlying - structureal -> structural - appearences -> appearances - terciarily -> tertiarily - resgisters -> registers - reacheable -> reachable - likelyhood -> likelihood - intepreter -> interpreter - disassemly -> disassembly - covnersion -> conversion - conviently -> conveniently - atttribute -> attribute - struction -> struct - resonable -> reasonable - popupated -> populated - namespaxe -> namespace - intialize -> initialize - identifer(s) -> identifier(s) - expection -> exception - exectuted -> executed - dungerous -> dangerous - dissapear -> disappear - completly -> completely - (inter)changable -> (inter)changeable - beakpoint -> breakpoint - automativ -> automatic - alocating -> allocating - agressive -> aggressive - writting -> writing - reguires -> requires - registed -> registered - recuding -> reducing - opeartor -> operator - ommitted -> omitted - modifing -> modifying - intances -> instances - imbedded -> embedded - gdbaarch -> gdbarch - exection -> execution - direcive -> directive - demanged -> demangled - decidely -> decidedly - argments -> arguments - agrument -> argument - amespace -> namespace - targtet -> target - supress(ed) -> suppress(ed) - startum -> stratum - squence -> sequence - prompty -> prompt - overlow -> overflow - memember -> member - languge -> language - geneate -> generate - funcion -> function - exising -> existing - dinking -> syncing - destroh -> destroy - clenaed -> cleaned - changep -> changedp (name of variable) - arround -> around - aproach -> approach - whould -> would - symobl -> symbol - recuse -> recurse - outter -> outer - freeds -> frees - contex -> context Tested on x86_64-linux. Reviewed-By: Tom Tromey <tom@tromey.com>
2023-02-27Remove old GNU indent directivesTom Tromey1-4/+0
Now that gdb_indent.sh has been removed, I think it makes sense to also remove the directives intended for GNU indent.
2023-02-15Change value::m_modifiable to boolTom Tromey1-1/+1
This changes value::m_modifiable to be a bool and updates the various uses. Reviewed-By: Bruno Larsen <blarsen@redhat.com>
2023-02-14Fix build bug in ppc-linux-nat.cTom Tromey1-1/+1
The buildbot pointed out that my value refactoring series introduced a bug in ppc-linux-nat.c: ../../binutils-gdb/gdb/ppc-linux-nat.c: In member function ‘int ppc_linux_nat_target::num_memory_accesses(const std::vector<gdb::ref_ptr<value, value_ref_policy> >&)’: ../../binutils-gdb/gdb/ppc-linux-nat.c:2458:44: error: expected unqualified-id before ‘->’ token 2458 | if (VALUE_LVAL (v) == not_lval || v->->deprecated_modifiable () == 0) I don't know how that happened, but I am checking in this patch which I think should fix it. It just removes the second "->". I can't readily test this, so perhaps there's another bug lurking after this one.
2023-02-13Remove deprecated_lval_hackTom Tromey1-4/+4
This removes deprecated_lval_hack and the VALUE_LVAL macro, replacing all uses with a call to value::lval. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn value_address and set_value_address functions into methodsTom Tromey1-2/+2
This changes the value_address and set_value_address functions to be methods of value. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn value_lazy and set_value_lazy functions into methodsTom Tromey1-1/+1
This changes the value_lazy and set_value_lazy functions to be methods of value. Much of this patch was written by script. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn deprecated_value_modifiable into methodTom Tromey1-1/+1
This changes deprecated_value_modifiable to be a method of value. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn value_type into methodTom Tromey1-2/+2
This changes value_type to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker1-1/+1
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2022-10-19internal_error: remove need to pass __FILE__/__LINE__Pedro Alves1-2/+1
Currently, every internal_error call must be passed __FILE__/__LINE__ explicitly, like: internal_error (__FILE__, __LINE__, "foo %d", var); The need to pass in explicit __FILE__/__LINE__ is there probably because the function predates widespread and portable variadic macros availability. We can use variadic macros nowadays, and in fact, we already use them in several places, including the related gdb_assert_not_reached. So this patch renames the internal_error function to something else, and then reimplements internal_error as a variadic macro that expands __FILE__/__LINE__ itself. The result is that we now should call internal_error like so: internal_error ("foo %d", var); Likewise for internal_warning. The patch adjusts all calls sites. 99% of the adjustments were done with a perl/sed script. The non-mechanical changes are in gdbsupport/errors.h, gdbsupport/gdb_assert.h, and gdb/gdbarch.py. Approved-By: Simon Marchi <simon.marchi@efficios.com> Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
2022-10-11gdb: fix auxv cachingSimon Marchi1-12/+7
There's a flaw in the interaction of the auxv caching and the fact that target_auxv_search allows reading auxv from an arbitrary target_ops (passed in as a parameter). This has consequences as explained in this thread: https://inbox.sourceware.org/gdb-patches/20220719144542.1478037-1-luis.machado@arm.com/ In summary, when loading an AArch64 core file with MTE support by passing the executable and core file names directly to GDB, we see the MTE info: $ ./gdb -nx --data-directory=data-directory -q aarch64-mte-gcore aarch64-mte-gcore.core ... Program terminated with signal SIGSEGV, Segmentation fault Memory tag violation while accessing address 0x0000ffff8ef5e000 Allocation tag 0x1 Logical tag 0x0. #0 0x0000aaaade3d0b4c in ?? () (gdb) But if we do it as two separate commands (file and core) we don't: $ ./gdb -nx --data-directory=data-directory -q -ex "file aarch64-mte-gcore" -ex "core aarch64-mte-gcore.core" ... Program terminated with signal SIGSEGV, Segmentation fault. #0 0x0000aaaade3d0b4c in ?? () (gdb) The problem with the latter is that auxv data gets improperly cached between the two commands. When executing the file command, auxv gets first queried here, when loading the executable: #0 target_auxv_search (ops=0x55555b842400 <exec_ops>, match=0x9, valp=0x7fffffffc5d0) at /home/simark/src/binutils-gdb/gdb/auxv.c:383 #1 0x0000555557e576f2 in svr4_exec_displacement (displacementp=0x7fffffffc8c0) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2482 #2 0x0000555557e594d1 in svr4_relocate_main_executable () at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2878 #3 0x0000555557e5989e in svr4_solib_create_inferior_hook (from_tty=1) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2933 #4 0x0000555557e6e49f in solib_create_inferior_hook (from_tty=1) at /home/simark/src/binutils-gdb/gdb/solib.c:1253 #5 0x0000555557f33e29 in symbol_file_command (args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/symfile.c:1655 #6 0x00005555573319c3 in file_command (arg=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/exec.c:555 #7 0x0000555556e47185 in do_simple_func (args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1, c=0x612000047740) at /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:95 #8 0x0000555556e551c9 in cmd_func (cmd=0x612000047740, args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:2543 #9 0x00005555580e63fd in execute_command (p=0x7fffffffe02c "e", from_tty=1) at /home/simark/src/binutils-gdb/gdb/top.c:692 #10 0x0000555557771913 in catch_command_errors (command=0x5555580e55ad <execute_command(char const*, int)>, arg=0x7fffffffe017 "file aarch64-mte-gcore", from_tty=1, do_bp_actions=true) at /home/simark/src/binutils-gdb/gdb/main.c:513 #11 0x0000555557771fba in execute_cmdargs (cmdarg_vec=0x7fffffffd570, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x7fffffffd230) at /home/simark/src/binutils-gdb/gdb/main.c:608 #12 0x00005555577755ac in captured_main_1 (context=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1299 #13 0x0000555557775c2d in captured_main (data=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1320 #14 0x0000555557775cc2 in gdb_main (args=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1345 #15 0x00005555568bdcbe in main (argc=10, argv=0x7fffffffdba8) at /home/simark/src/binutils-gdb/gdb/gdb.c:32 Here, target_auxv_search is called on the inferior's target stack. The target stack only contains the exec target, so the query returns empty auxv data. This gets cached for that inferior in `auxv_inferior_data`. In its constructor (before it is pushed to the inferior's target stack), the core_target needs to identify the right target description from the core, and for that asks the gdbarch to read a target description from the core file. Because some implementations of gdbarch_core_read_description (such as AArch64's) need to read auxv data from the core in order to determine the right target description, the core_target passes a pointer to itself, allowing implementations to call target_auxv_search it. However, because we have previously cached (empty) auxv data for that inferior, target_auxv_search searched that cached (empty) auxv data, not auxv data read from the core. Remember that this data was obtained by reading auxv on the inferior's target stack, which only contained an exec target. The problem I see is that while target_auxv_search offers the flexibility of reading from an arbitrary (passed as an argument) target, the caching doesn't do the distinction of which target is being queried, and where the cached data came from. So, you could read auxv from a target A, it gets cached, then you try to read auxv from a target B, and it returns the cached data from target A. That sounds wrong. In our case, we expect to read different auxv data from the core target than what we have read from the target stack earlier, so it doesn't make sense to hit the cache in this case. To fix this, I propose splitting the code paths that read auxv data from an inferior's target stack and those that read from a passed-in target. The code path that reads from the target stack will keep caching, whereas the one that reads from a passed-in target won't. And since, searching in auxv data is independent from where this data came from, split the "read" part from the "search" part. From what I understand, auxv caching was introduced mostly to reduce latency on remote connections, when doing many queries. With the change I propose, only the queries done while constructing the core_target end up not using cached auxv data. This is fine, because there are just a handful of queries max, done at this point, and reading core files is local. The changes to auxv functions are: - Introduce 2 target_read_auxv functions. One reads from an explicit target_ops and doesn't do caching (to be used in gdbarch_core_read_description context). The other takes no argument, reads from the current inferior's target stack (it looks just like a standard target function wrapper) and does caching. The first target_read_auxv actually replaces get_auxv_inferior_data, since it became a trivial wrapper around it. - Change the existing target_auxv_search to not read auxv data from the target, but to accept it as a parameter (a gdb::byte_vector). This function doesn't care where the data came from, it just searches in it. It still needs to take a target_ops and gdbarch to know how to parse auxv entries. - Add a convenience target_auxv_search overload that reads auxv data from the inferior's target stack and searches in it. This overload is useful to replace the exist target_auxv_search calls that passed the `current_inferior ()->top_target ()` target and keep the call sites short. - Modify parse_auxv to accept a target_ops and gdbarch to use for parsing entries. Not strictly related to the rest of this change, but it seems like a good change in the context. Changes in architecture-specific files (tdep and nat): - In linux-tdep, linux_get_hwcap and linux_get_hwcap2 get split in two, similar to target_auxv_search. One version receives auxv data, target and arch as parameters. The other gets everything from the current inferior. The latter is for convenience, to avoid making call sites too ugly. - Call sites of linux_get_hwcap and linux_get_hwcap2 are adjusted to use either of the new versions. The call sites in gdbarch_core_read_description context explicitly read auxv data from the passed-in target and call the linux_get_hwcap{,2} function with parameters. Other call sites use the versions without parameters. - Same idea for arm_fbsd_read_description_auxv. - Call sites of target_auxv_search that passed `current_inferior ()->top_target ()` are changed to use the target_auxv_search overload that works in the current inferior. Reviewed-By: John Baldwin <jhb@FreeBSD.org> Reviewed-By: Luis Machado <luis.machado@arm.com> Change-Id: Ib775a220cf1e76443fb7da2fdff8fc631128fe66
2022-09-29gdb: constify auxv parse functionsSimon Marchi1-5/+5
Constify the input parameters of the various auxv parse functions, they don't need to modify the raw auxv data. Change-Id: I13eacd5ab8e925ec2b5c1f7722cbab39c41516ec
2022-09-21gdb: remove TYPE_LENGTHSimon Marchi1-2/+2
Remove the macro, replace all uses with calls to type::length. Change-Id: Ib9bdc954576860b21190886534c99103d6a47afb
2022-07-21gdb: move the type cast into gdbarch_tdepAndrew Burgess1-11/+11
I built GDB for all targets on a x86-64/GNU-Linux system, and then (accidentally) passed GDB a RISC-V binary, and asked GDB to "run" the binary on the native target. I got this error: (gdb) show architecture The target architecture is set to "auto" (currently "i386"). (gdb) file /tmp/hello.rv32.exe Reading symbols from /tmp/hello.rv32.exe... (gdb) show architecture The target architecture is set to "auto" (currently "riscv:rv32"). (gdb) run Starting program: /tmp/hello.rv32.exe ../../src/gdb/i387-tdep.c:596: internal-error: i387_supply_fxsave: Assertion `tdep->st0_regnum >= I386_ST0_REGNUM' failed. What's going on here is this; initially the architecture is i386, this is based on the default architecture, which is set based on the native target. After loading the RISC-V executable the architecture of the current inferior is updated based on the architecture of the executable. When we "run", GDB does a fork & exec, with the inferior being controlled through ptrace. GDB sees an initial stop from the inferior as soon as the inferior comes to life. In response to this stop GDB ends up calling save_stop_reason (linux-nat.c), which ends up trying to read register from the inferior, to do this we end up calling target_ops::fetch_registers, which, for the x86-64 native target, calls amd64_linux_nat_target::fetch_registers. After this I eventually end up in i387_supply_fxsave, different x86 based targets will end in different functions to fetch registers, but it doesn't really matter which function we end up in, the problem is this line, which is repeated in many places: i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch); The problem here is that the ARCH in this line comes from the current inferior, which, as we discussed above, will be a RISC-V gdbarch, the tdep field will actually be of type riscv_gdbarch_tdep, not i386_gdbarch_tdep. After this cast we are relying on undefined behaviour, in my case I happen to trigger an assert, but this might not always be the case. The thing I tried that exposed this problem was of course, trying to start an executable of the wrong architecture on a native target. I don't think that the correct solution for this problem is to detect, at the point of cast, that the gdbarch_tdep object is of the wrong type, but, I did wonder, is there a way that we could protect ourselves from incorrectly casting the gdbarch_tdep object? I think that there is something we can do here, and this commit is the first step in that direction, though no actual check is added by this commit. This commit can be split into two parts: (1) In gdbarch.h and arch-utils.c. In these files I have modified gdbarch_tdep (the function) so that it now takes a template argument, like this: template<typename TDepType> static inline TDepType * gdbarch_tdep (struct gdbarch *gdbarch) { struct gdbarch_tdep *tdep = gdbarch_tdep_1 (gdbarch); return static_cast<TDepType *> (tdep); } After this change we are no better protected, but the cast is now done within the gdbarch_tdep function rather than at the call sites, this leads to the second, much larger change in this commit, (2) Everywhere gdbarch_tdep is called, we make changes like this: - i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch); + i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (arch); There should be no functional change after this commit. In the next commit I will build on this change to add an assertion in gdbarch_tdep that checks we are casting to the correct type.
2022-06-08gdb: remove trailing '.' from perror_with_name callsAndrew Burgess1-6/+6
I ran into this error while working on AArch64 GDB: Unable to fetch VFP registers.: Invalid argument. Notice the '.:' in the middle of this error message. This is because of this call in aarch64-linux-nat.c: perror_with_name (_("Unable to fetch VFP registers.")); The perror_with_name function take a string, and adds ': <message>' to the end the string, so I don't think the string that we pass to perror_with_name should end in '.'. This commit removes all of the trailing '.' characters from perror_with_name calls, which give more readable error messages. I don't believe that any of these errors are tested in the testsuite (after a little grepping).
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-11-15gdb: adjust gdbarch_tdep calls in nat filesSimon Marchi1-11/+11
Commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") forgot to update the gdbarch_tdep calls in the native files other than x86-64 Linux. This patch updates them all (to the best of my knowledge). These are the files I was able to build-test: aarch64-linux-nat.c amd64-bsd-nat.c arm-linux-nat.c ppc-linux-nat.c windows-nat.c xtensa-linux-nat.c And these are the ones I could not build-test: aix-thread.c arm-netbsd-nat.c ppc-fbsd-nat.c ppc-netbsd-nat.c ia64-tdep.c (the part that needs libunwind) ppc-obsd-nat.c rs6000-nat.c If there are still some build problems related to gdbarch_tdep in them, they should be pretty obvious to fix. Change-Id: Iaa3d791a850e4432973757598e634e3da6061428
2021-05-23[gdb/tdep] Use pid to choose process 64/32-bitnessTom de Vries1-3/+1
In a linux kernel mailing list discussion, it was mentioned that "gdb has this odd thing where it takes the 64-bit vs 32-bit data for the whole process from one thread, and picks the worst possible thread to do it (ie explicitly not even the main thread, ...)" [1]. The picking of the thread is done here in x86_linux_nat_target::read_description: ... /* GNU/Linux LWP ID's are process ID's. */ tid = inferior_ptid.lwp (); if (tid == 0) tid = inferior_ptid.pid (); /* Not a threaded program. */ ... To understand what this code does, let's investigate a scenario in which inferior_ptid.lwp () != inferior_ptid.pid (). Say we start exec jit-attach-pie, identified with pid x. The main thread starts another thread that sleeps, and then the main thread waits for the sleeping thread. So we have two threads, identified with LWP IDs x and x+1: ... PID LWP CMD x x ./jit-attach-pie x x+1 ./jit-attach-pie ... [ The thread with LWP x is known as the thread group leader. ] When attaching to this exec using the pid, gdb does a stop_all_threads which iterates over all the threads, first LWP x, and then LWP x+1. So the state we arrive with at x86_linux_nat_target::read_description is: ... (gdb) p inferior_ptid $1 = {m_pid = x, m_lwp = x+1, m_tid = 0} ... and consequently we probe 64/32-bitness from thread LWP x+1. [ Note that this is different from when gdb doesn't attach but instead launches the exec itself, in which case there's just one thread to begin with, and consequently the probed thread is LWP x. ] According to aforementioned remark, a better choice would have been the main thread, that is, LWP x. This patch implement that choice, by simply doing: ... tid = inferior_ptid.pid (); ... The fact that gdb makes a per-process permanent choice for 64/32-bitness is a problem in itself: each thread can be in either 64 or 32 bit mode, and change forth and back. That is a problem that this patch doesn't fix. Now finally: why does this matter in the context of the linux kernel discussion? The discussion was related to a patch that exposed io_uring threads to user-space. This made it possible that one of those threads would be picked out to select 64/32-bitness. Given that such threads are atypical user-space threads in the sense that they don't return to user-space and don't have a userspace register state, reading their registers returns garbage, and so it could f.i. occur that in a 64-bit process with all normal user-space threads in 64-bit mode, the probing would return 32-bit. It may be that this is worked-around on the kernel side by providing userspace register state in those threads such that current gdb is happy. Nevertheless, it seems prudent to fix this on the gdb size as well. Tested on x86_64-linux. [1] https://lore.kernel.org/io-uring/CAHk-=wh0KoEZXPYMGkfkeVEerSCEF1AiCZSvz9TRrx=Kj74D+Q@mail.gmail.com/ gdb/ChangeLog: 2021-05-23 Tom de Vries <tdevries@suse.de> PR tdep/27822 * target.h (struct target_ops): Mention target_thread_architecture in read_description comment. * x86-linux-nat.c (x86_linux_nat_target::read_description): Use pid to determine if process is 64-bit or 32-bit. * aarch64-linux-nat.c (aarch64_linux_nat_target::read_description): Same. * ppc-linux-nat.c (ppc_linux_nat_target::read_description): Same. * riscv-linux-nat.c (riscv_linux_nat_target::read_description): Same. * s390-linux-nat.c (s390_linux_nat_target::read_description): Same. * arm-linux-nat.c (arm_linux_nat_target::read_description): Same. Likewise, use pid to determine if kernel supports reading VFP registers.
2021-03-24gdb: remove current_top_target functionSimon Marchi1-7/+12
The current_top_target function is a hidden dependency on the current inferior. Since I'd like to slowly move towards reducing our dependency on the global current state, remove this function and make callers use current_inferior ()->top_target () There is no expected change in behavior, but this one step towards making those callers use the inferior from their context, rather than refer to the global current inferior. gdb/ChangeLog: * target.h (current_top_target): Remove, make callers use the current inferior instead. * target.c (current_top_target): Remove. Change-Id: Iccd457036f84466cdaa3865aa3f9339a24ea001d
2021-03-08Remove union exp_elementTom Tromey1-17/+8
This removes union exp_element functions that either create such elements or walk them. struct expression no longer holds exp_elements. A couple of language_defn methods are also removed, as they are obsolete. Note that this patch also removes the print_expression code. The only in-tree caller of this was from dump_prefix_expression, which is only called when expression debugging is enabled. Implementing this would involve a fair amount of code, and it seems to me that prefix dumping is preferable anyway, as it is unambiguous. So, I have not reimplemented this feature. gdb/ChangeLog 2021-03-08 Tom Tromey <tom@tromey.com> * value.h (evaluate_subexp_with_coercion): Don't declare. * parse.c (exp_descriptor_standard): Remove. (expr_builder::expr_builder, expr_builder::release): Update. (expression::expression): Remove size_t parameter. (expression::~expression): Simplify. (expression::resize): Remove. (write_exp_elt, write_exp_elt_opcode, write_exp_elt_sym) (write_exp_elt_msym, write_exp_elt_block, write_exp_elt_objfile) (write_exp_elt_longcst, write_exp_elt_floatcst) (write_exp_elt_type, write_exp_elt_intern, write_exp_string) (write_exp_string_vector, write_exp_bitstring): Remove. * p-lang.h (class pascal_language) <opcode_print_table, op_print_tab>: Remove. * p-lang.c (pascal_language::op_print_tab): Remove. * opencl-lang.c (class opencl_language) <opcode_print_table>: Remove. * objc-lang.c (objc_op_print_tab): Remove. (class objc_language) <opcode_print_table>: Remove. * m2-lang.h (class m2_language) <opcode_print_table, op_print_tab>: Remove. * m2-lang.c (m2_language::op_print_tab): Remove. * language.h (struct language_defn) <post_parser, expression_ops, opcode_print_table>: Remove. * language.c (language_defn::expression_ops) (auto_or_unknown_language::opcode_print_table): Remove. * go-lang.h (class go_language) <opcode_print_table, op_print_tab>: Remove. * go-lang.c (go_language::op_print_tab): Remove. * f-lang.h (class f_language) <opcode_print_table>: Remove <op_print_tab>: Remove. * f-lang.c (f_language::op_print_tab): Remove. * expression.h (union exp_element): Remove. (struct expression): Remove size_t parameter from constructor. <resize>: Remove. <first_opcode>: Update. <nelts, elts>: Remove. (EXP_ELEM_TO_BYTES, BYTES_TO_EXP_ELEM): Remove. (evaluate_subexp_standard, print_expression, op_string) (dump_raw_expression): Don't declare. * expprint.c (print_expression, print_subexp) (print_subexp_funcall, print_subexp_standard, op_string) (dump_raw_expression, dump_subexp, dump_subexp_body) (dump_subexp_body_funcall, dump_subexp_body_standard): Remove. (dump_prefix_expression): Update. * eval.c (evaluate_subexp): Remove. (evaluate_expression, evaluate_type): Update. (evaluate_subexpression_type): Remove. (fetch_subexp_value): Remove "pc" parameter. Update. (extract_field_op, evaluate_struct_tuple, evaluate_funcall) (evaluate_subexp_standard, evaluate_subexp_for_address) (evaluate_subexp_with_coercion, evaluate_subexp_for_sizeof) (evaluate_subexp_for_cast): Remove. (parse_and_eval_type): Update. * dtrace-probe.c (dtrace_probe::compile_to_ax): Update. * d-lang.c (d_op_print_tab): Remove. (class d_language) <opcode_print_table>: Remove. * c-lang.h (c_op_print_tab): Don't declare. * c-lang.c (c_op_print_tab): Remove. (class c_language, class cplus_language, class asm_language, class minimal_language) <opcode_print_table>: Remove. * breakpoint.c (update_watchpoint, watchpoint_check) (watchpoint_exp_is_const, watch_command_1): Update. * ax-gdb.h (union exp_element): Don't declare. * ax-gdb.c (const_var_ref, const_expr, maybe_const_expr) (gen_repeat, gen_sizeof, gen_expr_for_cast, gen_expr) (gen_expr_binop_rest): Remove. (gen_trace_for_expr, gen_eval_for_expr, gen_printf): Update. * ada-lang.c (ada_op_print_tab): Remove. (class ada_language) <post_parser, opcode_print_table>: Remove.
2021-03-08Add an expr::operation_up to struct expressionTom Tromey1-3/+17
This adds an expr::operation_up to struct expression, and then modifies various parts of GDB to use this member when it is non-null. The list of such spots was a bit surprising to me, and found only after writing most of the code and then noticing what no longer compiled. In a few spots, new accessor methods are added to operation subclasses, so that code that dissects an expression will work with the new scheme. After this change, code that constructs an expression can be switched to the new form without breaking. gdb/ChangeLog 2021-03-08 Tom Tromey <tom@tromey.com> * ada-exp.h (class ada_var_value_operation) <get_symbol>: Remove; now in superclass. * value.h (fetch_subexp_value): Add "op" parameter. * value.c (init_if_undefined_command): Update. * tracepoint.c (validate_actionline, encode_actions_1): Update. * stap-probe.c (stap_probe::compile_to_ax): Update. * printcmd.c (set_command): Update. * ppc-linux-nat.c (ppc_linux_nat_target::check_condition): Update. * parser-defs.h (struct expr_builder) <set_operation>: New method. * parse.c (parse_exp_in_context, exp_uses_objfile): Update. * expression.h (struct expression) <first_opcode>: Update. <op>: New member. * expprint.c (dump_raw_expression, dump_prefix_expression): Update. * expop.h (class var_value_operation) <get_symbol>: New method. (class register_operation) <get_name>: New method. (class equal_operation): No longer a typedef, now a subclass. (class unop_memval_operation) <get_type>: New method. (class assign_operation) <get_lhs>: New method. (class unop_cast_operation) <get_type>: New method. * eval.c (evaluate_expression, evaluate_type) (evaluate_subexpression_type): Update. (fetch_subexp_value): Add "op" parameter. (parse_and_eval_type): Update. * dtrace-probe.c (dtrace_probe::compile_to_ax): Update. * breakpoint.c (update_watchpoint, watchpoint_check) (watchpoint_exp_is_const, watch_command_1): Update. * ax-gdb.c (gen_trace_for_expr, gen_eval_for_expr, gen_printf): Update.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-12-01PowerPC remove 512 bytes region limit if 2nd DAWR is avaliable.Rogerio Alves1-8/+18
Power 10 introduces the 2nd DAWR (second watchpoint) and also removed a restriction that limit the watch region to 512 bytes. 2020-11-08 Rogerio A. Cardoso <rcardoso@linux.ibm.com> /gdb * ppc-linux-nat.c: (PPC_DEBUG_FEATURE_DATA_BP_ARCH_31): New define. (region_ok_for_hw_watchpoint): Check if 2nd DAWR is avaliable before set region.
2020-11-19gdb: convert some function arguments from int to boolAndrew Burgess1-2/+2
A little int to bool conversion around the 'watch' type commands. There should be no user visible changes after this commit. gdb/ChangeLog: * breakpoint.c (update_watchpoint): Pass 'false' not '0'. (watch_command_1): Update parameter types. Convert locals to bool. (watch_command_wrapper): Change parameter type. (watch_maybe_just_location): Change locals to bool. (rwatch_command_wrapper): Update parameter type. (awatch_command_wrapper): Update parameter type. * breakpoint.h (watch_command_wrapper): Change parameter type. (rwatch_command_wrapper): Update parameter type. (awatch_command_wrapper): Update parameter type. * eval.c (fetch_subexp_value): Change parameter type. * ppc-linux-nat.c (ppc_linux_nat_target::check_condition): Pass 'false' not '0'. * value.h (fetch_subexp_value): Change parameter type in declaration.
2020-11-02gdb, gdbserver, gdbsupport: fix leading space vs tabs issuesSimon Marchi1-111/+111
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
2020-08-14[PowerPC] Always clear watchpoint with PTRACE_SET_DEBUGREGPedro Franco de Carvalho1-9/+12
This patches changes low_prepare_to_resume in the ppc linux native target to always clear the watchpoint when the old PTRACE_SET_DEBUGREG interface is used, even if another watchpoint GDB requested to the target is written right after using the same call. The reason for this is that there were some older kernel versions for which overwriting a watchpoint with PTRACE_SET_DEBUGREG would not re-activate the watchpoint if it was previouly disabled following a hit. This happened when the kernel was configured with CONFIG_HW_BREAKPOINT on and uses perf events to install watchpoints. Previously, the ppc linux native target would immediately remove or insert watchpoints following a request from the upper layers. This was changed in commit 227c0bf4b3dd0cf65dceb58e729e9da81b38b5a7 to fix other issues, which caused watchpoint requests to be applied to the inferior only in low_prepare_to_resume, right before the inferior is resumed. Usually, but maybe not always, after a hit, GDB will remove the watchpoint, resume the inferior for a single-step, possibly report the watchpoint hit to the user, and then re-insert the watchpoint before the inferior is next resumed. In this case there would be no problems, but since I can't guarantee that there aren't other paths in GDB that allow the user to set a new watchpoint after the first one hit, and after its deletion by GDB, but before the inferior is resumed, there is a chance that PTRACE_SET_DEBUGREG could be called directly without the watchpoint first having been cleared, which could cause a false negative with the older kernel versions. This issue would affect kernel versions starting from this commit: 5aae8a53708025d4e718f0d2e7c2f766779ddc71 Up to the fix in this commit: a53fd61ac2f411745471c1c877d5e072fbbf0e5c gdb/ChangeLog: PR breakpoints/26385 * ppc-linux-nat.c (ppc_linux_nat_target::low_prepare_to_resume): Always clear watchpoint with PTRACE_SET_DEBUGREG.
2020-08-14[PowerPC] Use < 0 and >= 0 for watchpoint ptrace callsPedro Franco de Carvalho1-4/+4
In commit 227c0bf4b3dd0cf65dceb58e729e9da81b38b5a7, which fixed some watchpoint bugs, I compared the return value of some ptrace calls with == -1 and != -1. Althought this should be correct, since the rest of the file uses < 0 and >= 0, I have modified this for consistency. gdb/ChangeLog: * ppc-linux-nat.c (ppc_linux_dreg_interface::detect) (ppc_linux_nat_target::low_prepare_to_resume): Use ptrace () < 0 and >= to check return value instead of == -1 and != -1.
2020-03-30[PowerPC] Fix debug register issues in ppc-linux-natPedro Franco de Carvalho1-396/+924
This patch fixes some issues with debug register handling for the powerpc linux native target. Currently, the target methods for installing and removing hardware breakpoints and watchpoints in ppc-linux-nat.c affect all threads known to linux-nat, including threads of different processes. This patch changes ppc-linux-nat.c so that only the process of inferior_ptid is affected by these target methods, as GDB expects. This is done in the same way as various other architectures. The install/remove target methods only register a hardware breakpoint or watchpoint, and then send a stop signal to the threads. The debug registers are only changed with ptrace right before each thread is next resumed, using low_prepare_to_resume. There are two interfaces to modify debug registers for linux running on powerpc, with different sets of ptrace requests: - PPC_PTRACE_GETHWDBGINFO, PPC_PTRACE_SETHWDEBUG, and PPC_PTRACE_DELHWDEBUG. Or - PTRACE_SET_DEBUGREG and PTRACE_GET_DEBUGREG The first set (HWDEBUG) is the more flexible one and allows setting watchpoints with a variable watched region length and, for certain embedded processors, multiple types of debug registers (e.g. hardware breakpoints and hardware-assisted conditions for watchpoints). Currently, server processors only provide one watchpoint. The second one (DEBUGREG) only allows setting one debug register, a watchpoint, so we only use it if the first one is not available. The HWDEBUG interface handles debug registers with slot numbers. Once a hardware watchpoint or breakpoint is installed (with PPC_PTRACE_SETHWDEBUG), ptrace returns a slot number. This slot number can then be used to remove the watchpoint or breakpoint from the inferior (with PPC_PTRACE_DELHWDEBUG). The first interface also provides a bitmask of available debug register features, which can be obtained with PPC_PTRACE_GETHWDBGINFO. When GDB first tries to use debug registers, we try the first interface with a ptrace call, and if it isn't available, we fall back to the second one, if available. We use EIO as an indicator that an interface is not available in the kernel. For simplicity, with any other error we immediately assume no interface is available. Unfortunately this means that if a process is killed by a signal right before we try to detect the interface, we might get an ESRCH, which would prevent debug registers to be used in the GDB session. However, it isn't clear that we can safely raise an exception and try again in the future in all the contexts where we try to detect the interface. If the HWDEBUG interface works but provides no feature bits, the target falls back to the DEBUGREG interface. When the kernel is configured without CONFIG_HW_BREAKPOINTS (selected by CONFIG_PERF_EVENTS), there is a bug that causes watchpoints installed with the HWDEBUG interface not to trigger. When this is the case, the feature bits will be zero, which is used as the indicator to fall back to the DEBUGREG interface. This isn't ideal, but has always been the behavior of GDB before this patch, so I decided not to change it. A flag indicates for each thread if its debug registers need to be updated the next time it is resumed. The flag is set whenever the upper layers request or remove a hardware watchpoint or breakpoint, or when a new thread is detected. Because some kernel configurations disable watchpoints after they are hit, we also use the last stop reason of the LWP to determine whether we should update the debug registers. It isn't clear that this is also true of BookE hardware breakpoints, but we also check their stop reason to be on the safe side, since it doesn't hurt. A map from process numbers to hardware watchpoint or breakpoint objects keeps track of what has been requested by the upper layers of GDB, since for GDB installing a hardware watchpoint or breakpoint means doing so for the whole process. When using the HWDEBUG interface we also have to keep track of which slots were last installed in each thread with a map from threads to the slots, so that they can be removed when needed. When resuming a thread, we remove all the slots using this map, then we install all the hardware watchpoints and breakpoints from the per-process map of requests, and then update the per-thread map accordingly. This per-thread state is also used for copying the debug register state after a fork or a clone is detected. The kernel might do this depending on the configuration. Recent kernels running on server processors that were configured with CONFIG_PERF_EVENTS (and therefore CONFIG_HW_BREAKPOINTS) don't copy debug registers across forks and clones. Recent kernels without CONFIG_HW_BREAKPOINTS copy this state. I believe that on embedded processors (e.g. a ppc440) the debug register state is copied, but I haven't been able to test this. To handle both cases, the per-thread state is always copied when forks and clones are detected, and when we resume the thread and delete the debug register slots before updating them, we ignore ENOENT errors. We don't need to handle this when using the DEBUGREG interface since it only allows one hardware watchpoint and doesn't return slot numbers, we just set or clear this watchpoint when needed. Since we signal running threads to stop after a request is processed, so that we can update their debug registers when they are next resumed, there will be a time between signalling the threads and their stop during which the debug registers haven't been updated, even if the target methods completed. The tests in gdb.threads/watchpoint-fork.exp no longer fail with this patch. gdb/ChangeLog: 2020-03-30 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * ppc-linux-nat.c: Include <algorithm>, <unordered_map>, and <list>. Remove inclusion of observable.h. (PPC_DEBUG_CURRENT_VERSION): Move up define. (struct arch_lwp_info): New struct. (class ppc_linux_dreg_interface): New class. (struct ppc_linux_process_info): New struct. (struct ppc_linux_nat_target) <low_delete_thread, low_new_fork> <low_new_clone, low_forget_process, low_prepare_to_resume> <copy_thread_dreg_state, mark_thread_stale> <mark_debug_registers_changed, register_hw_breakpoint> <clear_hw_breakpoint, register_wp, clear_wp> <can_use_watchpoint_cond_accel, calculate_dvc, check_condition> <num_memory_accesses, get_trigger_type> <create_watchpoint_request, hwdebug_point_cmp> <init_arch_lwp_info, get_arch_lwp_info> <low_stopped_by_watchpoint, low_stopped_data_address>: Declare as methods. <struct ptid_hash>: New inner struct. <m_dreg_interface, m_process_info, m_installed_hw_bps>: Declare members. (saved_dabr_value, hwdebug_info, max_slots_number) (struct hw_break_tuple, struct thread_points, ppc_threads) (have_ptrace_hwdebug_interface) (hwdebug_find_thread_points_by_tid) (hwdebug_insert_point, hwdebug_remove_point): Remove. (ppc_linux_nat_target::can_use_hw_breakpoint): Use m_dreg_interface, remove call to PTRACE_SET_DEBUGREG. (ppc_linux_nat_target::region_ok_for_hw_watchpoint): Add comment, use m_dreg_interface. (hwdebug_point_cmp): Change to... (ppc_linux_nat_target::hwdebug_point_cmp): ...this method. Use reference arguments instead of pointers. (ppc_linux_nat_target::ranged_break_num_registers): Use m_dreg_interface. (ppc_linux_nat_target::insert_hw_breakpoint): Add comment, use m_dreg_interface. Call register_hw_breakpoint. (ppc_linux_nat_target::remove_hw_breakpoint): Add comment, use m_dreg_interface. Call clear_hw_breakpoint. (get_trigger_type): Change to... (ppc_linux_nat_target::get_trigger_type): ...this method. Add comment. (ppc_linux_nat_target::insert_mask_watchpoint): Update comment, use m_dreg_interface. Call register_hw_breakpoint. (ppc_linux_nat_target::remove_mask_watchpoint): Update comment, use m_dreg_interface. Call clear_hw_breakpoint. (can_use_watchpoint_cond_accel): Change to... (ppc_linux_nat_target::can_use_watchpoint_cond_accel): ...this method. Update comment, use m_dreg_interface and m_process_info. (calculate_dvc): Change to... (ppc_linux_nat_target::calculate_dvc): ...this method. Use m_dreg_interface. (num_memory_accesses): Change to... (ppc_linux_nat_target::num_memory_accesses): ...this method. (check_condition): Change to... (ppc_linux_nat_target::check_condition): ...this method. (ppc_linux_nat_target::can_accel_watchpoint_condition): Update comment, use m_dreg_interface. (create_watchpoint_request): Change to... (ppc_linux_nat_target::create_watchpoint_request): ...this method. Use m_dreg_interface. (ppc_linux_nat_target::insert_watchpoint): Add comment, use m_dreg_interface. Call register_hw_breakpoint or register_wp. (ppc_linux_nat_target::remove_watchpoint): Add comment, use m_dreg_interface. Call clear_hw_breakpoint or clear_wp. (ppc_linux_nat_target::low_forget_process) (ppc_linux_nat_target::low_new_fork) (ppc_linux_nat_target::low_new_clone) (ppc_linux_nat_target::low_delete_thread) (ppc_linux_nat_target::low_prepare_to_resume): New methods. (ppc_linux_nat_target::low_new_thread): Remove previous logic, only call mark_thread_stale. (ppc_linux_thread_exit): Remove. (ppc_linux_nat_target::stopped_data_address): Change to... (ppc_linux_nat_target::low_stopped_data_address): This. Add comment, use m_dreg_interface and m_thread_hw_breakpoints. (ppc_linux_nat_target::stopped_by_watchpoint): Change to... (ppc_linux_nat_target::stopped_by_watchpoint): This. Add comment. Call low_stopped_data_address. (ppc_linux_nat_target::watchpoint_addr_within_range): Use m_dreg_interface. (ppc_linux_nat_target::masked_watch_num_registers): Use m_dreg_interface. (ppc_linux_nat_target::copy_thread_dreg_state) (ppc_linux_nat_target::mark_thread_stale) (ppc_linux_nat_target::mark_debug_registers_changed) (ppc_linux_nat_target::register_hw_breakpoint) (ppc_linux_nat_target::clear_hw_breakpoint) (ppc_linux_nat_target::register_wp) (ppc_linux_nat_target::clear_wp) (ppc_linux_nat_target::init_arch_lwp_info) (ppc_linux_nat_target::get_arch_lwp_info): New methods. (_initialize_ppc_linux_nat): Remove observer callback.
2020-03-30[PowerPC] Move up some register access routinesPedro Franco de Carvalho1-164/+164
Keep the routines related to register access grouped together. gdb/ChangeLog: 2020-03-30 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * ppc-linux-nat.c (ppc_linux_nat_target::store_registers) (ppc_linux_nat_target::auxv_parse) (ppc_linux_nat_target::read_description) (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset): Move up.
2020-01-13gdb: add back declarations for _initialize functionsSimon Marchi1-1/+2
I'd like to enable the -Wmissing-declarations warning. However, it warns for every _initialize function, for example: CXX dcache.o /home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’: /home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations] _initialize_dcache (void) ^~~~~~~~~~~~~~~~~~ The only practical way forward I found is to add back the declarations, which were removed by this commit: commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9 Author: John Baldwin <jhb@FreeBSD.org> Date: Sat Sep 9 11:02:37 2017 -0700 Remove unnecessary function prototypes. I don't think it's a big problem to have the declarations for these functions, but if anybody has a better solution for this, I'll be happy to use it. gdb/ChangeLog: * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration. * aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration. * aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration. * aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration. * aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration. * ada-exp.y (_initialize_ada_exp): Add declaration. * ada-lang.c (_initialize_ada_language): Add declaration. * ada-tasks.c (_initialize_tasks): Add declaration. * agent.c (_initialize_agent): Add declaration. * aix-thread.c (_initialize_aix_thread): Add declaration. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration. * alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration. * alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration. * alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration. * alpha-tdep.c (_initialize_alpha_tdep): Add declaration. * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration. * amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration. * amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration. * amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration. * amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration. * amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration. * amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration. * amd64-tdep.c (_initialize_amd64_tdep): Add declaration. * amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration. * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration. * annotate.c (_initialize_annotate): Add declaration. * arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration. * arc-tdep.c (_initialize_arc_tdep): Add declaration. * arch-utils.c (_initialize_gdbarch_utils): Add declaration. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration. * arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration. * arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration. * arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration. * arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration. * arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration. * arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration. * arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration. * arm-tdep.c (_initialize_arm_tdep): Add declaration. * arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration. * auto-load.c (_initialize_auto_load): Add declaration. * auxv.c (_initialize_auxv): Add declaration. * avr-tdep.c (_initialize_avr_tdep): Add declaration. * ax-gdb.c (_initialize_ax_gdb): Add declaration. * bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration. * bfin-tdep.c (_initialize_bfin_tdep): Add declaration. * break-catch-sig.c (_initialize_break_catch_sig): Add declaration. * break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration. * break-catch-throw.c (_initialize_break_catch_throw): Add declaration. * breakpoint.c (_initialize_breakpoint): Add declaration. * bsd-uthread.c (_initialize_bsd_uthread): Add declaration. * btrace.c (_initialize_btrace): Add declaration. * charset.c (_initialize_charset): Add declaration. * cli/cli-cmds.c (_initialize_cli_cmds): Add declaration. * cli/cli-dump.c (_initialize_cli_dump): Add declaration. * cli/cli-interp.c (_initialize_cli_interp): Add declaration. * cli/cli-logging.c (_initialize_cli_logging): Add declaration. * cli/cli-script.c (_initialize_cli_script): Add declaration. * cli/cli-style.c (_initialize_cli_style): Add declaration. * coff-pe-read.c (_initialize_coff_pe_read): Add declaration. * coffread.c (_initialize_coffread): Add declaration. * compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration. * compile/compile.c (_initialize_compile): Add declaration. * complaints.c (_initialize_complaints): Add declaration. * completer.c (_initialize_completer): Add declaration. * copying.c (_initialize_copying): Add declaration. * corefile.c (_initialize_core): Add declaration. * corelow.c (_initialize_corelow): Add declaration. * cp-abi.c (_initialize_cp_abi): Add declaration. * cp-namespace.c (_initialize_cp_namespace): Add declaration. * cp-support.c (_initialize_cp_support): Add declaration. * cp-valprint.c (_initialize_cp_valprint): Add declaration. * cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration. * cris-tdep.c (_initialize_cris_tdep): Add declaration. * csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration. * csky-tdep.c (_initialize_csky_tdep): Add declaration. * ctfread.c (_initialize_ctfread): Add declaration. * d-lang.c (_initialize_d_language): Add declaration. * darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration. * darwin-nat.c (_initialize_darwin_nat): Add declaration. * dbxread.c (_initialize_dbxread): Add declaration. * dcache.c (_initialize_dcache): Add declaration. * disasm-selftests.c (_initialize_disasm_selftests): Add declaration. * disasm.c (_initialize_disasm): Add declaration. * dtrace-probe.c (_initialize_dtrace_probe): Add declaration. * dummy-frame.c (_initialize_dummy_frame): Add declaration. * dwarf-index-cache.c (_initialize_index_cache): Add declaration. * dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration. * dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration. * dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration. * dwarf2expr.c (_initialize_dwarf2expr): Add declaration. * dwarf2loc.c (_initialize_dwarf2loc): Add declaration. * dwarf2read.c (_initialize_dwarf2_read): Add declaration. * elfread.c (_initialize_elfread): Add declaration. * exec.c (_initialize_exec): Add declaration. * extension.c (_initialize_extension): Add declaration. * f-lang.c (_initialize_f_language): Add declaration. * f-valprint.c (_initialize_f_valprint): Add declaration. * fbsd-nat.c (_initialize_fbsd_nat): Add declaration. * fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration. * filesystem.c (_initialize_filesystem): Add declaration. * findcmd.c (_initialize_mem_search): Add declaration. * findvar.c (_initialize_findvar): Add declaration. * fork-child.c (_initialize_fork_child): Add declaration. * frame-base.c (_initialize_frame_base): Add declaration. * frame-unwind.c (_initialize_frame_unwind): Add declaration. * frame.c (_initialize_frame): Add declaration. * frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration. * frv-tdep.c (_initialize_frv_tdep): Add declaration. * ft32-tdep.c (_initialize_ft32_tdep): Add declaration. * gcore.c (_initialize_gcore): Add declaration. * gdb-demangle.c (_initialize_gdb_demangle): Add declaration. * gdb_bfd.c (_initialize_gdb_bfd): Add declaration. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration. * gdbarch.c (_initialize_gdbarch): Add declaration. * gdbtypes.c (_initialize_gdbtypes): Add declaration. * gnu-nat.c (_initialize_gnu_nat): Add declaration. * gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration. * gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration. * go-lang.c (_initialize_go_language): Add declaration. * go32-nat.c (_initialize_go32_nat): Add declaration. * guile/guile.c (_initialize_guile): Add declaration. * h8300-tdep.c (_initialize_h8300_tdep): Add declaration. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration. * hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration. * hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration. * hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration. * hppa-tdep.c (_initialize_hppa_tdep): Add declaration. * i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration. * i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration. * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration. * i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration. * i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration. * i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration. * i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration. * i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration. * i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration. * i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration. * i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration. * i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration. * i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration. * i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration. * i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration. * i386-tdep.c (_initialize_i386_tdep): Add declaration. * i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration. * ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration. * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration. * ia64-tdep.c (_initialize_ia64_tdep): Add declaration. * ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration. * infcall.c (_initialize_infcall): Add declaration. * infcmd.c (_initialize_infcmd): Add declaration. * inflow.c (_initialize_inflow): Add declaration. * infrun.c (_initialize_infrun): Add declaration. * interps.c (_initialize_interpreter): Add declaration. * iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration. * jit.c (_initialize_jit): Add declaration. * language.c (_initialize_language): Add declaration. * linux-fork.c (_initialize_linux_fork): Add declaration. * linux-nat.c (_initialize_linux_nat): Add declaration. * linux-tdep.c (_initialize_linux_tdep): Add declaration. * linux-thread-db.c (_initialize_thread_db): Add declaration. * lm32-tdep.c (_initialize_lm32_tdep): Add declaration. * m2-lang.c (_initialize_m2_language): Add declaration. * m32c-tdep.c (_initialize_m32c_tdep): Add declaration. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration. * m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration. * m32r-tdep.c (_initialize_m32r_tdep): Add declaration. * m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration. * m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration. * m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration. * m68k-tdep.c (_initialize_m68k_tdep): Add declaration. * machoread.c (_initialize_machoread): Add declaration. * macrocmd.c (_initialize_macrocmd): Add declaration. * macroscope.c (_initialize_macroscope): Add declaration. * maint-test-options.c (_initialize_maint_test_options): Add declaration. * maint-test-settings.c (_initialize_maint_test_settings): Add declaration. * maint.c (_initialize_maint_cmds): Add declaration. * mdebugread.c (_initialize_mdebugread): Add declaration. * memattr.c (_initialize_mem): Add declaration. * mep-tdep.c (_initialize_mep_tdep): Add declaration. * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration. * mi/mi-cmds.c (_initialize_mi_cmds): Add declaration. * mi/mi-interp.c (_initialize_mi_interp): Add declaration. * mi/mi-main.c (_initialize_mi_main): Add declaration. * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration. * microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration. * mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration. * mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration. * mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration. * mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration. * mips-tdep.c (_initialize_mips_tdep): Add declaration. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration. * mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration. * mipsread.c (_initialize_mipsread): Add declaration. * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration. * mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration. * moxie-tdep.c (_initialize_moxie_tdep): Add declaration. * msp430-tdep.c (_initialize_msp430_tdep): Add declaration. * nds32-tdep.c (_initialize_nds32_tdep): Add declaration. * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration. * nios2-tdep.c (_initialize_nios2_tdep): Add declaration. * nto-procfs.c (_initialize_procfs): Add declaration. * objc-lang.c (_initialize_objc_language): Add declaration. * observable.c (_initialize_observer): Add declaration. * opencl-lang.c (_initialize_opencl_language): Add declaration. * or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration. * or1k-tdep.c (_initialize_or1k_tdep): Add declaration. * osabi.c (_initialize_gdb_osabi): Add declaration. * osdata.c (_initialize_osdata): Add declaration. * p-valprint.c (_initialize_pascal_valprint): Add declaration. * parse.c (_initialize_parse): Add declaration. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration. * ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration. * ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration. * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration. * ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration. * printcmd.c (_initialize_printcmd): Add declaration. * probe.c (_initialize_probe): Add declaration. * proc-api.c (_initialize_proc_api): Add declaration. * proc-events.c (_initialize_proc_events): Add declaration. * proc-service.c (_initialize_proc_service): Add declaration. * procfs.c (_initialize_procfs): Add declaration. * producer.c (_initialize_producer): Add declaration. * psymtab.c (_initialize_psymtab): Add declaration. * python/python.c (_initialize_python): Add declaration. * ravenscar-thread.c (_initialize_ravenscar): Add declaration. * record-btrace.c (_initialize_record_btrace): Add declaration. * record-full.c (_initialize_record_full): Add declaration. * record.c (_initialize_record): Add declaration. * regcache-dump.c (_initialize_regcache_dump): Add declaration. * regcache.c (_initialize_regcache): Add declaration. * reggroups.c (_initialize_reggroup): Add declaration. * remote-notif.c (_initialize_notif): Add declaration. * remote-sim.c (_initialize_remote_sim): Add declaration. * remote.c (_initialize_remote): Add declaration. * reverse.c (_initialize_reverse): Add declaration. * riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration. * riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration. * riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration. * riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration. * riscv-tdep.c (_initialize_riscv_tdep): Add declaration. * rl78-tdep.c (_initialize_rl78_tdep): Add declaration. * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration. * rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep): Add declaration. * rs6000-nat.c (_initialize_rs6000_nat): Add declaration. * rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration. * run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration. * rust-exp.y (_initialize_rust_exp): Add declaration. * rx-tdep.c (_initialize_rx_tdep): Add declaration. * s12z-tdep.c (_initialize_s12z_tdep): Add declaration. * s390-linux-nat.c (_initialize_s390_nat): Add declaration. * s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration. * s390-tdep.c (_initialize_s390_tdep): Add declaration. * score-tdep.c (_initialize_score_tdep): Add declaration. * ser-go32.c (_initialize_ser_dos): Add declaration. * ser-mingw.c (_initialize_ser_windows): Add declaration. * ser-pipe.c (_initialize_ser_pipe): Add declaration. * ser-tcp.c (_initialize_ser_tcp): Add declaration. * ser-uds.c (_initialize_ser_socket): Add declaration. * ser-unix.c (_initialize_ser_hardwire): Add declaration. * serial.c (_initialize_serial): Add declaration. * sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration. * sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration. * sh-tdep.c (_initialize_sh_tdep): Add declaration. * skip.c (_initialize_step_skip): Add declaration. * sol-thread.c (_initialize_sol_thread): Add declaration. * solib-aix.c (_initialize_solib_aix): Add declaration. * solib-darwin.c (_initialize_darwin_solib): Add declaration. * solib-dsbt.c (_initialize_dsbt_solib): Add declaration. * solib-frv.c (_initialize_frv_solib): Add declaration. * solib-svr4.c (_initialize_svr4_solib): Add declaration. * solib-target.c (_initialize_solib_target): Add declaration. * solib.c (_initialize_solib): Add declaration. * source-cache.c (_initialize_source_cache): Add declaration. * source.c (_initialize_source): Add declaration. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration. * sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration. * sparc-nat.c (_initialize_sparc_nat): Add declaration. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration. * sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration. * sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration. * sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration. * sparc-tdep.c (_initialize_sparc_tdep): Add declaration. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration. * sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration. * sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration. * sparc64-nat.c (_initialize_sparc64_nat): Add declaration. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration. * sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration. * sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration. * sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration. * sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration. * stabsread.c (_initialize_stabsread): Add declaration. * stack.c (_initialize_stack): Add declaration. * stap-probe.c (_initialize_stap_probe): Add declaration. * std-regs.c (_initialize_frame_reg): Add declaration. * symfile-debug.c (_initialize_symfile_debug): Add declaration. * symfile-mem.c (_initialize_symfile_mem): Add declaration. * symfile.c (_initialize_symfile): Add declaration. * symmisc.c (_initialize_symmisc): Add declaration. * symtab.c (_initialize_symtab): Add declaration. * target.c (_initialize_target): Add declaration. * target-connection.c (_initialize_target_connection): Add declaration. * target-dcache.c (_initialize_target_dcache): Add declaration. * target-descriptions.c (_initialize_target_descriptions): Add declaration. * thread.c (_initialize_thread): Add declaration. * tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration. * tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration. * tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration. * tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration. * tracectf.c (_initialize_ctf): Add declaration. * tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration. * tracefile.c (_initialize_tracefile): Add declaration. * tracepoint.c (_initialize_tracepoint): Add declaration. * tui/tui-hooks.c (_initialize_tui_hooks): Add declaration. * tui/tui-interp.c (_initialize_tui_interp): Add declaration. * tui/tui-layout.c (_initialize_tui_layout): Add declaration. * tui/tui-regs.c (_initialize_tui_regs): Add declaration. * tui/tui-stack.c (_initialize_tui_stack): Add declaration. * tui/tui-win.c (_initialize_tui_win): Add declaration. * tui/tui.c (_initialize_tui): Add declaration. * typeprint.c (_initialize_typeprint): Add declaration. * ui-style.c (_initialize_ui_style): Add declaration. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration. * unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration. * unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration. * unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration. * unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration. * unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration. * unittests/filtered_iterator-selftests.c (_initialize_filtered_iterator_selftests): Add declaration. * unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration. * unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration. * unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration. * unittests/main-thread-selftests.c (_initialize_main_thread_selftests): Add declaration. * unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration. * unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration. * unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration. * unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration. * unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration. * unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration. * unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration. * unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration. * unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration. * unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration. * unittests/style-selftests.c (_initialize_style_selftest): Add declaration. * unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration. * unittests/tui-selftests.c (_initialize_tui_selftest): Add declaration. * unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration. * unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration. * unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration. * unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration. * user-regs.c (_initialize_user_regs): Add declaration. * utils.c (_initialize_utils): Add declaration. * v850-tdep.c (_initialize_v850_tdep): Add declaration. * valops.c (_initialize_valops): Add declaration. * valprint.c (_initialize_valprint): Add declaration. * value.c (_initialize_values): Add declaration. * varobj.c (_initialize_varobj): Add declaration. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration. * vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration. * vax-tdep.c (_initialize_vax_tdep): Add declaration. * windows-nat.c (_initialize_windows_nat): Add declaration. (_initialize_check_for_gdb_ini): Add declaration. (_initialize_loadable): Add declaration. * windows-tdep.c (_initialize_windows_tdep): Add declaration. * x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration. * x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration. * xcoffread.c (_initialize_xcoffread): Add declaration. * xml-support.c (_initialize_xml_support): Add declaration. * xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration. * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration. * xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration. Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-10-26[gdb] Fix more typos in comments (2)Tom de Vries1-1/+1
Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-26 Tom de Vries <tdevries@suse.de> * aarch64-linux-tdep.c: Fix typos in comments. * aarch64-tdep.c: Same. * ada-lang.c: Same. * amd64-nat.c: Same. * arc-tdep.c: Same. * arch/aarch64-insn.c: Same. * block.c: Same. * breakpoint.h: Same. * btrace.h: Same. * c-varobj.c: Same. * cli/cli-decode.c: Same. * cli/cli-script.c: Same. * cli/cli-utils.h: Same. * coff-pe-read.c: Same. * coffread.c: Same. * compile/compile-cplus-symbols.c: Same. * compile/compile-object-run.c: Same. * completer.c: Same. * corelow.c: Same. * cp-support.c: Same. * demangle.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame.c: Same. * dwarf2-frame.h: Same. * eval.c: Same. * frame-base.h: Same. * frame.h: Same. * gdbcmd.h: Same. * gdbtypes.h: Same. * gnu-nat.c: Same. * guile/scm-objfile.c: Same. * i386-tdep.c: Same. * i386-tdep.h: Same. * infcall.c: Same. * infcall.h: Same. * linux-nat.c: Same. * m68k-tdep.c: Same. * macroexp.c: Same. * memattr.c: Same. * mi/mi-cmd-disas.c: Same. * mi/mi-getopt.h: Same. * mi/mi-main.c: Same. * minsyms.c: Same. * nat/aarch64-sve-linux-sigcontext.h: Same. * objfiles.h: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-tdep.h: Same. * progspace.h: Same. * prologue-value.h: Same. * python/py-evtregistry.c: Same. * python/py-instruction.h: Same. * record-btrace.c: Same. * record-full.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * ser-tcp.c: Same. * sol-thread.c: Same. * sparc-sol2-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * symfile.c: Same. * symtab.h: Same. * target.c: Same. * tracepoint.c: Same. * tui/tui-data.h: Same. * tui/tui-io.c: Same. * tui/tui-win.c: Same. * tui/tui.c: Same. * unittests/rsp-low-selftests.c: Same. * user-regs.h: Same. * utils.c: Same. * utils.h: Same. * valarith.c: Same. * valops.c: Same. * valprint.c: Same. * valprint.h: Same. * value.c: Same. * value.h: Same. * varobj.c: Same. * x86-nat.h: Same. * xtensa-tdep.c: Same. gdb/gdbserver/ChangeLog: 2019-10-26 Tom de Vries <tdevries@suse.de> * linux-aarch64-low.c: Fix typos in comments. * linux-arm-low.c: Same. * linux-low.c: Same. * linux-ppc-low.c: Same. * proc-service.c: Same. * regcache.h: Same. * server.c: Same. * tracepoint.c: Same. * win32-low.c: Same. gdb/stubs/ChangeLog: 2019-10-26 Tom de Vries <tdevries@suse.de> * ia64vms-stub.c: Fix typos in comments. * m32r-stub.c: Same. * m68k-stub.c: Same. * sh-stub.c: Same. gdb/testsuite/ChangeLog: 2019-10-26 Tom de Vries <tdevries@suse.de> * gdb.base/bigcore.c: Fix typos in comments. * gdb.base/ctf-ptype.c: Same. * gdb.base/long_long.c: Same. * gdb.dwarf2/dw2-op-out-param.S: Same. * gdb.python/py-evthreads.c: Same. * gdb.reverse/i387-stack-reverse.c: Same. * gdb.trace/tfile.c: Same. * lib/compiler.c: Same. * lib/compiler.cc: Same. Change-Id: I8573d84a577894270179ae30f46c48d806fc1beb
2019-10-18[gdb] Fix more typos in commentsTom de Vries1-1/+1
Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-18 Tom de Vries <tdevries@suse.de> * aarch64-tdep.c: Fix typos in comments. * ada-lang.c: Same. * ada-tasks.c: Same. * alpha-tdep.c: Same. * alpha-tdep.h: Same. * amd64-nat.c: Same. * amd64-windows-tdep.c: Same. * arc-tdep.c: Same. * arc-tdep.h: Same. * arch-utils.c: Same. * arm-nbsd-tdep.c: Same. * arm-tdep.c: Same. * ax-gdb.c: Same. * blockframe.c: Same. * btrace.c: Same. * c-varobj.c: Same. * coff-pe-read.c: Same. * coffread.c: Same. * cris-tdep.c: Same. * darwin-nat.c: Same. * dbxread.c: Same. * dcache.c: Same. * disasm.c: Same. * dtrace-probe.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame-tailcall.c: Same. * dwarf2-frame.c: Same. * dwarf2read.c: Same. * eval.c: Same. * exceptions.c: Same. * fbsd-tdep.c: Same. * findvar.c: Same. * frame.c: Same. * frv-tdep.c: Same. * gnu-v3-abi.c: Same. * go32-nat.c: Same. * h8300-tdep.c: Same. * hppa-tdep.c: Same. * i386-linux-tdep.c: Same. * i386-tdep.c: Same. * ia64-libunwind-tdep.c: Same. * ia64-tdep.c: Same. * infcmd.c: Same. * infrun.c: Same. * linespec.c: Same. * linux-nat.c: Same. * linux-thread-db.c: Same. * machoread.c: Same. * mdebugread.c: Same. * mep-tdep.c: Same. * mn10300-tdep.c: Same. * namespace.c: Same. * objfiles.c: Same. * opencl-lang.c: Same. * or1k-tdep.c: Same. * osabi.c: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-sysv-tdep.c: Same. * printcmd.c: Same. * procfs.c: Same. * record-btrace.c: Same. * record-full.c: Same. * remote-fileio.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * s12z-tdep.c: Same. * score-tdep.c: Same. * ser-base.c: Same. * ser-go32.c: Same. * skip.c: Same. * sol-thread.c: Same. * solib-svr4.c: Same. * solib.c: Same. * source.c: Same. * sparc-nat.c: Same. * sparc-sol2-tdep.c: Same. * sparc-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * stack.c: Same. * symfile.c: Same. * symtab.c: Same. * target-descriptions.c: Same. * target-float.c: Same. * thread.c: Same. * utils.c: Same. * valops.c: Same. * valprint.c: Same. * value.c: Same. * varobj.c: Same. * windows-nat.c: Same. * xcoffread.c: Same. * xstormy16-tdep.c: Same. * xtensa-tdep.c: Same. Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4
2019-10-15gdb: Update comments that reference VEC or vec.hAndrew Burgess1-3/+3
With the removal of the old VEC mechanism from the code base, update comments that still make reference to VECs. There should be no user visible changes after this commit. gdb/ChangeLog: * linespec.c (decode_digits_ordinary): Update comment. * make-target-delegates: No longer need to handle VEC case. * memrange.c (normalize_mem_ranges): Update comment. * namespace.c (add_using_directive): Update comment. * objc-lang.c (uniquify_strings): Update comment. * ppc-linux-nat.c (struct thread_points): Update comment. * probe.h (find_probes_in_objfile): Update comment. * target.h (enum flash_preserve_mode): Update comment. * varobj.c (varobj_restrict_range): Update comment. * varobj.h (varobj_list_children): Update comment. Change-Id: Iefd2e903705c3e79cd13b43395c7a1c167f9a088
2019-09-20Remove Cell Broadband Engine debugging supportUlrich Weigand1-3/+0
This patch implements removal of Cell/B.E. support, including - Support for the spu-*-* target - Support for native stand-alone SPU debugging - Support for integrated debugging of combined PPU/SPU applications - Remote debugging (gdbserver) support for all the above. The patch also removes the TARGET_OBJECT_SPU target object type, as this is available only on Cell/B.E. targets, including - Native Linux support - Core file support (including core file generation) - Remote target support, including removal of the qXfer:spu:read and qXfer:spu:write remote protocal packets and associated support in gdbserver. gdb/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * NEWS: Mention that Cell/B.E. debugging support was removed. * MAINTAINERS: Remove spu target. * config/djgpp/fnchange.lst: Remove entries for removed files. * Makefile.in (ALL_TARGET_OBS): Remove solib-spu.o, spu-multiarch.o, and spu-tdep.o. (HFILES_NO_SRCDIR): Remove solib-spu.h and spu-tdep.h. (ALLDEPFILES): Remove solib-spu.c, spu-linux-nat.c, spu-multiarch.c, and spu-tdep.c. * spu-linux-nat.c: Remove file. * spu-multiarch.c: Remove file. * spu-tdep.c: Remove file. * spu-tdep.h: Remove file. * solib-spu.c: Remove file. * solib-spu.h: Remove file. * configure.host (powerpc64*-*-linux*): Remove Cell/B.E. support. * configure.nat (spu-linux): Remove. * configure.tgt (powerpc*-*-linux*): Remove solib-spu.o and solib-multiarch.o from gdb_target_obs. (spu*-*-*): Remove. * arch/ppc-linux-common.h (struct ppc_linux_features): Remove "cell" feature flag. (ppc_linux_no_features): Update. * arch/ppc-linux-common.c (ppc_linux_match_description): Remove Cell/B.E. support. * arch/ppc-linux-tdesc.h (tdesc_powerpc_cell32l): Remove declaration. (tdesc_powerpc_cell64l): Likewise. * nat/ppc-linux.h (PPC_FEATURE_CELL): Remove. * ppc-linux-nat.c (ppc_linux_nat_target::read_description): Remove Cell/B.E. support. * ppc-linux-tdep.h: Do not include "solib-spu.h" or "spu-tdep.h". Do not include "features/rs6000/powerpc-cell32l.c" or "features/rs6000/powerpc-cell64l.c". (ppc_linux_spu_section): Remove. (ppc_linux_core_read_description): Remove Cell/B.E. support. (spe_context_objfile, spe_context_lm_addr, spe_context_offset, spe_context_cache_ptid, spe_context_cache_ptid): Remove. (ppc_linux_spe_context_lookup): Remove. (ppc_linux_spe_context_inferior_created): Remove. (ppc_linux_spe_context_solib_loaded): Remove. (ppc_linux_spe_context_solib_unloaded): Remove. (ppc_linux_spe_context): Remove. (struct ppu2spu_cache): Remove. (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register): Remove. (struct ppu2spu_data): Remove. (ppu2spu_unwind_register, ppu2spu_sniffer, ppu2spu_dealloc_cache, ppu2spu_unwind): Remove. (ppc_linux_init_abi): Remove Cell/B.E. support. * rs6000-tdep.h (rs6000_gdbarch_init): Remove Cell/B.E. support. * features/Makefile (rs6000/powerpc-cell32l-expedite): Remove. (rs6000/powerpc-cell64l-expedite): Likewise (WHICH): Remove rs6000/powerpc-cell32l and rs6000/powerpc-cell64l. (XMLTOC): Remove rs6000/powerpc-cell32l.xml and rs6000/powerpc-cell64l.xml. * features/rs6000/powerpc-cell32l.xml: Remove. * features/rs6000/powerpc-cell64l.xml: Likewise. * features/rs6000/powerpc-cell32l.c: Remove generated file. * features/rs6000/powerpc-cell64l.c: Likewise. * regformats/rs6000/powerpc-cell32l.dat: Remove generated file. * regformats/rs6000/powerpc-cell64l.dat: Likewise. * regformats/reg-spu.dat: Remove. * target.h (enum target_object): Remove TARGET_OBJECT_SPU. * corelow.c (struct spuid_list): Remove. (add_to_spuid_list): Remove. (core_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * remote.c (PACKET_qXfer_spu_read, PACKET_qXfer_spu_write): Remove. (remote_protocol_features): Remove associated entries. (_initialize_remote): No longer initialize them. (remote_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * linux-nat.c (SPUFS_MAGIC): Remove. (linux_proc_xfer_spu): Remove. (spu_enumerate_spu_ids): Remove. (linux_nat_target::xfer_partial): Remove support for TARGET_OBJECT_SPU. * linux-tdep.c (-linux_spu_make_corefile_notes): Remove. (linux_make_corefile_notes): No longer call it. * regcache.c (cooked_read_test): Remove bfd_arch_spu special case. (cooked_write_test): Likewise. gdb/doc/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * doc/gdb.texinfo (Remote Configuration): Remove documentation for qXfer:spu:read and qXfer:spu:write. (General Query Packets): Likewise. (Cell Broadband Engine SPU architecture): Remove subsection. gdb/gdbserver/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * configure.srv (ipa_ppc_linux_regobj): Remove powerpc-cell32l-ipa.o and powerpc-cell64l-ipa.o. (powerpc*-*-linux*): Remove powerpc-cell32l.o and powerpc-cell64l.o from srv_regobj. Remove rs6000/powerpc-cell32l.xml and rs6000/powerpc-cell64l.xml from srv_xmlfiles. (spu*-*-*): Remove. * spu-low.c: Remove file. * linux-ppc-low.c (INSTR_SC, NR_spu_run): Remove. (parse_spufs_run): Remove. (ppc_get_pc): Remove Cell/B.E. support. (ppc_set_pc): Likewise. (ppc_breakpoint_at): Likewise. (ppc_arch_setup): Likewise. (ppc_get_ipa_tdesc_idx): Do not handle tdesc_powerpc_cell64l or tdesc_powerpc_cell32l. (initialize_low_arch): Do not call init_registers_powerpc_cell64l or init_registers_powerpc_cell32l. * linux-ppc-ipa.c (get_ipa_tdesc): Do not handle PPC_TDESC_CELL. (initialize_low_tracepoint): Do not call init_registers_powerpc_cell64l or init_registers_powerpc_cell32l. * linux-ppc-tdesc-init.h (PPC_TDESC_CELL): Mark as unused. (init_registers_powerpc_cell32l): Remove prototype. (init_registers_powerpc_cell64l): Likewise. * target.h (struct target_ops): Remove qxfer_spu member. * server.c (handle_qxfer_spu): Remove. (qxfer_packets): Remove entry for "spu". (handle_query): No longer support qXfer:spu:read or qXfer:spu:write. * linux-low.c (SPUFS_MAGIC): Remove. (spu_enumerate_spu_ids): Remove. (linux_qxfer_spu): Remove. (linux_target_ops): Remove qxfer_spu member. * lynx-low.c (lynx_target_ops): Remove qxfer_spu member. * nto-low.c (nto_target_ops): Remove qxfer_spu member. * win32-low.c (win32_target_ops): Remove qxfer_spu member. gdb/testsuite/ChangeLog 2019-09-20 Ulrich Weigand <uweigand@de.ibm.com> * gdb.arch/spu-info.exp: Remove file. * gdb.arch/spu-info.c: Remove file. * gdb.arch/spu-ls.exp: Remove file. * gdb.arch/spu-ls.c: Remove file. * gdb.asm/asm-source.exp: Remove support for spu*-*-*. * gdb.asm/spu.inc: Remove file. * gdb.base/dump.exp: Remove support for spu*-*-*. * gdb.base/stack-checking.exp: Likewise. * gdb.base/overlays.exp: Likewise. * gdb.base/ovlymgr.c: Likewise. * gdb.base/spu.ld: Remove file. * gdb.cp/bs15503.exp: Remove support for spu*-*-*. * gdb.cp/cpexprs.exp: Likewise. * gdb.cp/exception.exp: Likewise. * gdb.cp/gdb2495.exp: Likewise. * gdb.cp/mb-templates.exp: Likewise. * gdb.cp/pr9167.exp: Likewise. * gdb.cp/userdef.exp: Likewise. * gdb.xml/tdesc-regs.exp: Remove support for spu*-*-*. * gdb.cell: Remove directory. * lib/cell.exp: Remove file.
2019-07-09Rename common to gdbsupportTom Tromey1-1/+1
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-04Remove a VEC from ppc-linux-nat.cTom Tromey1-28/+30
This replaces a VEC in ppc-linux-nat.c with a std::vector. gdb/ChangeLog 2019-05-04 Simon Marchi <simon.marchi@efficios.com> Tom Tromey <tom@tromey.com> * ppc-linux-nat.c (thread_points_p): Remove typedef and DEF_VEC. (ppc_threads): Now a std::vector. Now static. (hwdebug_find_thread_points_by_tid) (ppc_linux_nat_target::low_new_thread, ppc_linux_thread_exit): Update.
2019-03-26Fix Powerpc buildAlan Hayward1-0/+1
gdb/ChangeLog: * ppc-linux-nat.c: Add include.
generated by cgit v1.1 at 2024-11-22 03:15:23 +0000