aboutsummaryrefslogtreecommitdiff
path: root/gdb/objfiles.c
AgeCommit message (Collapse)AuthorFilesLines
2023-09-20Remove explanatory comments from includesTom Tromey1-1/+1
I noticed a comment by an include and remembered that I think these don't really provide much value -- sometimes they are just editorial, and sometimes they are obsolete. I think it's better to just remove them. Tested by rebuilding. Approved-By: Andrew Burgess <aburgess@redhat.com>
2023-08-18Remove most includes of psymtab.hTom Tromey1-1/+0
I found that most spots including psymtab.h do not need it. This patch removes these includes, and also one unnecessary include of psympriv.h.
2023-05-07Remove ALL_DICT_SYMBOLSTom Tromey1-7/+2
This replaces ALL_DICT_SYMBOLS with an iterator so that for-each can be used.
2023-05-07Remove ALL_OBJFILE_OSECTIONSTom Tromey1-11/+6
This replaces ALL_OBJFILE_OSECTIONS with an iterator so that for-each can be used.
2023-05-07Rename objfile::sectionsTom Tromey1-6/+6
I think objfile::sections makes sense as the name of the method to iterate over an objfile's sections, so this patch renames the existing field to objfile::sections_start in preparation for that.
2023-03-18Rename objfile_type to builtin_typeTom Tromey1-2/+2
This renames objfile_type to be an overload of builtin_type, in preparation for their unification. Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
2023-03-11Remove extra scopes from objfile_relocate1Tom Tromey1-43/+33
objfile_relocate1 introduces new scopes that aren't necessary. I noticed this while working on an earlier patch in this series. This patch removes these. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-03-11Change linetables to be objfile-independentTom Tromey1-16/+0
This changes linetables to not add the text offset to the addresses they contain. I did this in a few steps, necessarily combined together in one patch: I renamed the 'pc' member to 'm_pc', added the appropriate accessors, and then recompiled. Then I fixed all the errors. Where possible I generally chose to use the raw_pc accessor, as it is less expensive. Note that this patch discounts the possibility that the text section offset might cause wraparound in the addresses in the line table. However, this was already discounted -- in particular, objfile_relocate1 did not re-sort the table in this scenario. (There was a bug open about this, but as far as I can tell this has never happened, it's not even clear what inspired that bug.) Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-03-07Merge forget_cached_source_info_for_objfile into objfile methodTom Tromey1-1/+1
forget_cached_source_info_for_objfile does some objfile-specific work and then calls objfile::forget_cached_source_info. It seems better to me to just have the method do all the work.
2023-02-08Remove most calls to fixup_symbol_sectionTom Tromey1-2/+0
Nearly every call to fixup_symbol_section in gdb is incorrect, and if any such call has an effect, it's purely by happenstance. fixup_section has a long comment explaining that the call should only be made before runtime section offsets are applied. And, the loop in this code (the fallback loop -- the minsym lookup code is "ok") is careful to remove these offsets before comparing addresses. However, aside from a single call in dwarf2/read.c, every call in gdb is actually done after section offsets have been applied. So, these calls are incorrect. Now, these calls could be made when the symbol is created. I considered this approach, but I reasoned that the code has been this way for many years, seemingly without ill effect. So, instead I chose to simply remove the offending calls.
2023-02-08Remove compunit_symtab::m_block_line_sectionTom Tromey1-2/+2
The previous patch hard-coded SECT_OFF_TEXT into the buildsym code. After this, it's clear that there is only one caller of compunit_symtab::set_block_line_section, and it always passes SECT_OFF_TEXT. So, remove compunit_symtab::m_block_line_section and use SECT_OFF_TEXT instead.
2023-01-20Use bool in pc_in_* functionsTom Tromey1-10/+5
I noticed that pc_in_unmapped_range had a weird return type -- it was returning a CORE_ADDR but intending to return a bool. This patch changes all the pc_in_* functions to return bool instead.
2023-01-19Remove some unused includesTom Tromey1-1/+0
I noticed a few spots that include gnu-stabs.h but that do not need to. This patch removes these unnecessary includes. Tested by rebuilding.
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker1-1/+1
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2022-12-19Remove quick_symbol_functions::relocatedTom Tromey1-4/+0
quick_symbol_functions::relocated is only needed for psymtabs, and there it is only needed for Rust. However, because we've switched the DWARF reader away from psymtabs, this means there's no longer a need for this method at all.
2022-09-21gdb: remove TYPE_LENGTHSimon Marchi1-1/+1
Remove the macro, replace all uses with calls to type::length. Change-Id: Ib9bdc954576860b21190886534c99103d6a47afb
2022-08-03Use unique_ptr to destroy per-bfd objectTom Tromey1-15/+7
In some cases, the objfile owns the per-bfd object. This is yet another object that can sometimes be destroyed before the registry is destroyed, possibly reslting in a use-after-free. Also, I noticed that the condition for deleting the object is not the same as the condition used to create it -- so it could possibly result in a memory leak in some situations. This patch fixes the problem by introducing a new unique_ptr that holds this object when necessary.
2022-08-03Use auto_obstack in objfileTom Tromey1-7/+0
This changes objfile to use an auto_obstack. This helps prevent use-after-free bugs, because it ensures that anything allocated on the objfile obstack will live past the point at which the registry object is destroyed.
2022-08-03Use gdb_bfd_ref_ptr in objfileTom Tromey1-27/+28
This changes struct objfile to use a gdb_bfd_ref_ptr. In addition to removing some manual memory management, this fixes a use-after-free that was introduced by the registry rewrite series. The issue there was that, in some cases, registry shutdown could refer to memory that had already been freed. This help fix the bug by delaying the destruction of the BFD reference (and thus the per-bfd object) until after the registry has been shut down.
2022-07-28Rewrite registry.hTom Tromey1-13/+2
This rewrites registry.h, removing all the macros and replacing it with relatively ordinary template classes. The result is less code than the previous setup. It replaces large macros with a relatively straightforward C++ class, and now manages its own cleanup. The existing type-safe "key" class is replaced with the equivalent template class. This approach ended up requiring relatively few changes to the users of the registry code in gdb -- code using the key system just required a small change to the key's declaration. All existing users of the old C-like API are now converted to use the type-safe API. This mostly involved changing explicit deletion functions to be an operator() in a deleter class. The old "save/free" two-phase process is removed, and replaced with a single "free" phase. No existing code used both phases. The old "free" callbacks took a parameter for the enclosing container object. However, this wasn't truly needed and is removed here as well.
2022-06-12Remove addrmap wrapper functionsTom Tromey1-1/+1
This removes the various addrmap wrapper functions in favor of simple method calls on the objects themselves.
2022-06-02gdb: Do not add empty sections to the section mapIlya Leoshkevich1-1/+7
From: Ulrich Weigand <ulrich.weigand@de.ibm.com> build_objfile_section_table () creates four synthetic sections per objfile, which are collected by update_section_map () and passed to std::sort (). When there are a lot of objfiles, for example, when debugging JITs, the presence of these sections slows down the sorting significantly. The output of update_section_map () is used by find_pc_section (), which can never return any of these sections: their size is 0, so they cannot be accepted by bsearch_cmp (). Filter them (and all the other empty sections) out in insert_section_p (), which is used only by update_section_map ().
2022-05-31Use unique_ptr for objfilesTom Tromey1-3/+1
A while back, I changed objfiles to be held via a shared_ptr. The idea at the time was that this was a step toward writing to the index cache in the background, and this would let gdb keep a reference alive to do so. However, since then we've rewritten the DWARF reader, and the new index can do this without requiring a shared pointer -- in fact there are patches pending to implement this. This patch switches objfile management to unique_ptr, which makes more sense now. Regression tested on x86-64 Fedora 34.
2022-05-05gdb: use gdb::function_view for ↵Simon Marchi1-10/+4
gdbarch_iterate_over_objfiles_in_search_order callback A rather straightforward patch to change an instance of callback + void pointer to gdb::function_view, allowing pasing lambdas that capture, and eliminating the need for the untyped pointer. Change-Id: I73ed644e7849945265a2c763f79f5456695b0037
2022-04-27gdb: remove BLOCKVECTOR_MAP macroSimon Marchi1-2/+2
Replace with equivalent methods. Change-Id: I4e56c76dfc363c1447686fb29c4212ea18b4dba0
2022-04-27gdb: remove BLOCKVECTOR_BLOCK and BLOCKVECTOR_NBLOCKS macrosSimon Marchi1-4/+2
Replace with calls to blockvector::blocks, and the appropriate method call on the returned array_view. Change-Id: I04d1f39603e4d4c21c96822421431d9a029d8ddd
2022-04-27gdb: remove BLOCK_RANGES macroSimon Marchi1-7/+5
Replace with an equivalent method on struct block. Change-Id: I6dcf13e9464ba8a08ade85c89e7329c300fd6c2a
2022-04-27gdb: remove BLOCK_RANGE_{START,END} macrosSimon Marchi1-2/+3
Replace with equivalent methods on blockrange. Change-Id: I20fd8f624e0129782c36768291891e7582d77c74
2022-04-27gdb: remove BLOCK_MULTIDICT macroSimon Marchi1-1/+1
Replace with equivalent methods. Change-Id: If9a239c511a664f2a59fecb6d1cd579881b23dc2
2022-04-27gdb: remove BLOCK_{START,END} macrosSimon Marchi1-2/+2
Replace with equivalent methods. Change-Id: I10a6c8a2a86462d9d4a6a6409a3f07a6bea66310
2022-04-18gdbsupport: make gdb_abspath return an std::stringSimon Marchi1-2/+2
I'm trying to switch these functions to use std::string instead of char arrays, as much as possible. Some callers benefit from it (can avoid doing a copy of the result), while others suffer (have to make one more copy). Change-Id: Iced49b8ee2f189744c5072a3b217aab5af17a993
2022-04-11gdb: remove symbol value macrosSimon Marchi1-5/+2
Remove all macros related to getting and setting some symbol value: #define SYMBOL_VALUE(symbol) (symbol)->value.ivalue #define SYMBOL_VALUE_ADDRESS(symbol) \ #define SET_SYMBOL_VALUE_ADDRESS(symbol, new_value) \ #define SYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes #define SYMBOL_VALUE_COMMON_BLOCK(symbol) (symbol)->value.common_block #define SYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block #define SYMBOL_VALUE_CHAIN(symbol) (symbol)->value.chain #define MSYMBOL_VALUE(symbol) (symbol)->value.ivalue #define MSYMBOL_VALUE_RAW_ADDRESS(symbol) ((symbol)->value.address + 0) #define MSYMBOL_VALUE_ADDRESS(objfile, symbol) \ #define BMSYMBOL_VALUE_ADDRESS(symbol) \ #define SET_MSYMBOL_VALUE_ADDRESS(symbol, new_value) \ #define MSYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes #define MSYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block Replace them with equivalent methods on the appropriate objects. Change-Id: Iafdab3b8eefc6dc2fd895aa955bf64fafc59ed50
2022-04-07gdb: remove symtab::objfileSimon Marchi1-1/+1
Same idea as previous patch, but for symtab::objfile. I find it clearer without this wrapper, as it shows that the objfile is common to all symtabs of a given compunit. Otherwise, you could think that each symtab (of a given compunit) can have a specific objfile. Change-Id: Ifc0dbc7ec31a06eefa2787c921196949d5a6fcc6
2022-02-06gdb: remove SYMBOL_CLASS macro, add getterSimon Marchi1-2/+2
Change-Id: I83211d5a47efc0564386e5b5ea4a29c00b1fd46a
2022-02-06gdb: remove SYMTAB_OBJFILE macroSimon Marchi1-1/+1
Remove the macro, replace with an equivalent method. Change-Id: I8f9ecd290ad28502e53c1ceca5006ba78bf042eb
2022-02-06gdb: remove SYMTAB_LINETABLE macro, add getter/setterSimon Marchi1-1/+1
Add a getter and a setter for a symtab's linetable. Remove the corresponding macro and adjust all callers. Change-Id: I159183fc0ccd8e18ab937b3c2f09ef2244ec6e9c
2022-02-06gdb: remove COMPUNIT_BLOCK_LINE_SECTION macro, add getter/setterSimon Marchi1-2/+2
Add a getter and a setter for a compunit_symtab's block line section. Remove the corresponding macro and adjust all callers. Change-Id: I3eb1a323388ad55eae8bfa45f5bc4a08dc3df455
2022-02-06gdb: remove COMPUNIT_BLOCKVECTOR macro, add getter/setterSimon Marchi1-1/+1
Add a getter and a setter for a compunit_symtab's blockvector. Remove the corresponding macro and adjust all callers. Change-Id: I99484c6619dcbbea7c5d89c72aa660316ca62f64
2022-02-06gdb: move compunit_filetabs to compunit_symtab::filetabsSimon Marchi1-1/+1
Make compunit_filetabs, used to iterate a compunit_symtab's filetabs, a method of compunit_symtab. The name filetabs conflicts with the current name of the field. Rename the field to m_filetabs, since at this point nothing outside of compunit_symtab uses it, so we should treat it as private (even though it's not actually private). Rename the last_filetab field to m_last_filetab as well (it's only used on compunit_symtab::add_filetab). Adjust the COMPUNIT_FILETABS macro to keep its current behavior of returning the first filetab. Change-Id: I537b553a44451c52d24b18ee1bfa47e23747cfc3
2022-01-18Move gdb obstack code to gdbsupportTom Tromey1-1/+1
This moves the gdb-specific obstack code -- both extensions like obconcat and obstack_strdup, and things like auto_obstack -- to gdbsupport.
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-10-18CTF: incorrect underlying type setting for enumeration typesWeimin Pan1-0/+26
A bug was filed against the incorrect underlying type setting for an enumeration type, which was caused by a copy and paste error. This patch fixes the problem by setting it by calling objfile_int_type, which was originally dwarf2_per_objfile::int_type, with ctf_type_size bits. Also add error checking on ctf_func_type_info call.
2021-06-28gdb: convert obj_section macros to methodsSimon Marchi1-14/+13
Convert these three macros to methods of obj_section. The problem fixed by the following patch is caused by an out of bound access of the objfile::section_offsets vector. Since this is deep in macros, we don't get a clear backtrace and it's difficult to debug. Changing that to methods means we can step in them and break on them. Because their implementation requires knowing about struct objfile, move struct obj_section below struct objfile in objfiles.h. The obj_section_offset was used in one place as an lvalue to set offsets, in machoread.c. Replace that with a set_offset method. Add the objfile::section_offset and objfile::set_section_offset methods to improve encapsulation (reduce other objects poking into struct objfile's internals). gdb/ChangeLog: * objfiles.h (struct obj_section): Move down. <offset, set_offset, addr, endaddr>: New. (obj_section_offset, obj_section_addr, obj_section_endaddr), replace all users to use obj_section methods. (struct objfile) <section_offset, set_section_offset>: New. Change-Id: I97e8fcae93ab2353fbdadcb4a5ec10d7949a7334
2021-04-02gdb: remove objfile parameter from get_objfile_bfd_dataSimon Marchi1-6/+4
I noticed it was unused. I think that makes sense, as it shows that objfile_per_bfd_storage is not specific to one objfile (it can be shared by multiple objfiles that have the same bfd). There is one thing I wonder though, maybe I'm missing something. If the BFD doesn't require relocation, get_objfile_bfd_data stores the newly allocated object in objfiles_bfd_data, so we can assume that objfiles_bfd_data is the owner of the object. When the bfd's refcount drops to 0, the corresponding objfile_per_bfd_storage object in objfiles_bfd_data is deleted. But if the BFD requires relocation, get_objfile_bfd_data returns a newly allocated object that isn't kept anywhere else (and isn't shared). So the objfile becomes the owner of the objfile_per_bfd_storage object. In objfile::~objfile, we have this: if (obfd) gdb_bfd_unref (obfd); else delete per_bfd; I'm thinking that obfd could be non-nullptr, and it could require relocation. In that case, it would never be freed. Anyway, that's not really connected to this patch. gdb/ChangeLog: * objfiles.c (get_objfile_bfd_data): Remove objfile parameter, adjust callers. Change-Id: Ifa3158074ea6b42686780ba09d0c964b0cf14cf1
2021-04-02gdb: pass objfile_per_bfd_storage instead of objfile to partial_symtabSimon Marchi1-1/+1
Since partial_symtab is supposed to be objfile-independent (since series [1]), I think it would make sense for partial_symtab to not take an objfile as a parameter in its constructor. This patch replaces that parameter with an objfile_per_bfd_storage parameter. The objfile is used for two things: - to get the objfile_name, for debug messages. We can get that name from the bfd instead. - to intern the partial symtab filename. Even though it goes through an objfile method, the request is actually forwarded to the underlying objfile_per_bfd_storage. So we can ask the new objfile_per_bfd_storage instead. In order to get a reference to the BFD from the objfile_per_bfd_storage, the BFD is saved in the objfile_per_bfd_storage object. [1] https://sourceware.org/pipermail/gdb-patches/2021-February/176625.html gdb/ChangeLog: * psympriv.h (struct partial_symtab) <partial_symtab>: Change objfile parameter for objfile_per_bfd_storage, adjust callers. (struct standard_psymtab) <standard_psymtab>: Likewise. (struct legacy_psymtab) <legacy_psymtab>: Likewise. * psymtab.c (partial_symtab::partial_symtab): Likewise. * ctfread.c (struct ctf_psymtab): Likewise. * dwarf2/read.h (struct dwarf2_psymtab): Likewise. * dwarf2/read.c (struct dwarf2_include_psymtab): Likewise. (dwarf2_create_include_psymtab): Likewise. * objfiles.h (struct objfile_per_bfd_storage) <objfile_per_bfd_storage>: Add bfd parameter, adjust callers. <get_bfd>: New method. <m_bfd>: New field. * objfiles.c (get_objfile_bfd_data): Adjust. Change-Id: I2ed3ab5d2e6f27d034bd4dc26ae2fae7b0b8a2b9
2021-03-20Switch objfile to hold a list of psymbol readersTom Tromey1-2/+2
This changes objfile::qf to be a forward_list, and then updates all the uses to iterate over the list. Note that there is still only ever a single element in the list; this is handled by clearing the list whenever an object is added. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * dwarf2/read.c (dwarf2_build_psymtabs): Update. * symfile.c (syms_from_objfile_1, reread_symbols): Update. * symfile-debug.c (objfile::has_partial_symbols) (objfile::find_last_source_symtab) (objfile::forget_cached_source_info) (objfile::map_symtabs_matching_filename, objfile::lookup_symbol) (objfile::print_stats, objfile::dump) (objfile::expand_symtabs_for_function) (objfile::expand_all_symtabs) (objfile::expand_symtabs_with_fullname) (objfile::map_matching_symbols) (objfile::expand_symtabs_matching) (objfile::find_pc_sect_compunit_symtab) (objfile::map_symbol_filenames) (objfile::find_compunit_symtab_by_address) (objfile::lookup_global_symbol_language) (objfile::require_partial_symbols): Update. * psymtab.c (maintenance_print_psymbols) (maintenance_info_psymtabs, maintenance_check_psymtabs): Update. * objfiles.h (struct objfile) <qf>: Now a forward_list. * objfiles.c (objfile_relocate1): Update. * elfread.c (elf_symfile_read): Update.
2021-03-20Rearrange psymtab_storage constructionTom Tromey1-1/+0
This changes objfile so that it doesn't construct a psymtab_storage object until the psymtab functions are installed. It also applies a similar treatment to reread_symbols. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * symfile.c (syms_from_objfile_1): Call reset_psymtabs. (reread_symbols): Move reset_psymtabs call later. * objfiles.c (objfile::objfile): Don't initialize partial_symtabs.
2021-03-20Move psymbol_map out of objfileTom Tromey1-3/+3
objfile::psymbol_map is used to implement a Rust feature. It is currently specific to partial symbols -- it isn't used by the DWARF indices. This patch moves it out of objfile and into psymbol_functions, adding a new method to quick_symbol_functions to handle the clearing case. This is needed because the map holds unrelocated addresses. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * quick-symbol.h (struct quick_symbol_functions) <relocated>: New method. * psymtab.h (struct psymbol_functions) <relocated>: New method. <fill_psymbol_map>: Declare method. <m_psymbol_map>: New member. * psymtab.c (psymbol_functions::fill_psymbol_map): Rename. (psymbol_functions::find_compunit_symtab_by_address): Update. * objfiles.h (reset_psymtabs): Don't clear psymbol_map. (struct objfile) <psymbol_map>: Remove. * objfiles.c (objfile_relocate1): Update.
2021-03-20Introduce method wrappers for quick_symbol_functionsTom Tromey1-19/+0
This introduces wrappers for each function in quick_symbol_functions. The wrappers are methods on objfile, and are defined in symfile-debug.c, so that they can use the symfile_debug variable. Places that call the quick functions are all updated to call these new wrapper methods. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * symtab.c (iterate_over_symtabs, expand_symtab_containing_pc) (lookup_symbol_via_quick_fns, find_quick_global_symbol_language) (basic_lookup_transparent_type_quick) (find_pc_sect_compunit_symtab, find_symbol_at_address) (find_line_symtab, global_symbol_searcher::expand_symtabs): Update. * symmisc.c (print_objfile_statistics, dump_objfile) (maintenance_expand_symtabs): Update. * symfile.c (symbol_file_add_with_addrs) (expand_symtabs_matching, map_symbol_filenames): Update. * symfile-debug.c (objfile::has_partial_symbols) (objfile::find_last_source_symtab) (objfile::forget_cached_source_info) (objfile::map_symtabs_matching_filename, objfile::lookup_symbol) (objfile::print_stats, objfile::dump) (objfile::expand_symtabs_for_function) (objfile::expand_all_symtabs) (objfile::expand_symtabs_with_fullname) (objfile::map_matching_symbols) (objfile::expand_symtabs_matching) (objfile::find_pc_sect_compunit_symtab) (objfile::map_symbol_filenames) (objfile::find_compunit_symtab_by_address) (objfile::lookup_global_symbol_language): New methods. (debug_sym_quick_functions): Remove. (debug_sym_fns, install_symfile_debug_logging): Update. * source.c (forget_cached_source_info_for_objfile) (select_source_symtab): Update. * objfiles.h (struct objfile): Add methods corresponding to quick_symbol_functions. * objfiles.c (objfile::has_partial_symbols): Move to symfile-debug.c. * linespec.c (iterate_over_all_matching_symtabs): Update. * cp-support.c (add_symbol_overload_list_qualified): Update. * ada-lang.c (add_nonlocal_symbols): Update.
2021-03-20Change objfile::has_partial_symbols to return boolTom Tromey1-3/+3
This changes objfile::has_partial_symbols and quick_symbol_functions::has_symbols to return bool. gdb/ChangeLog 2021-03-20 Tom Tromey <tom@tromey.com> * objfiles.h (struct objfile) <has_partial_symbols>: Return bool. * symfile.h (struct quick_symbol_functions) <has_symbols>: Return bool. * symfile-debug.c (debug_qf_has_symbols): Return bool. * psymtab.c (psym_has_symbols): Return bool. * objfiles.c (objfile::has_partial_symbols): Return bool. * dwarf2/read.c (dw2_has_symbols): Return bool.
generated by cgit v1.1 at 2024-11-25 12:42:32 +0000