aboutsummaryrefslogtreecommitdiff
path: root/gdb/objfiles.c
AgeCommit message (Collapse)AuthorFilesLines
1994-04-01 For SVR4 targets, enable gdb to set breakpoints in sharedPeter Schauer1-0/+20
library functions before the executable is run. * elfread.c (elf_symtab_read): Handle symbols for shared library functions. * sparc-tdep.c (in_solib_trampoline): Renamed to in_plt_section and moved to objfiles.c. * objfiles.c (in_plt_section): Moved to here from sparc-tdep. * config/tm-sysv4.h (IN_SOLIB_TRAMPOLINE): Use new in_plt_section. * config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE): Removed, the new generic definition from tm-sysv4.h works for Solaris.
1994-03-21Mon Mar 21 11:02:51 1994 Stu Grossman (grossman at cygnus.com)Stu Grossman1-1/+41
* alpha-tdep.c: Gobs of changes (many imported from mips-tdep) to improve remote debugging efficiency. Also fixed problems with doing function calls for programs with no entry points. * infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of entry_point_address. * inferior.h (PC_IN_CALL_DUMMY): ditto. * mdebugread.c (parse_symbol, parse_procedure, parse_external, parse_lines): Pass section_offsets info to these routines so that we can relocate symbol table entries upon readin. * (psymtab_to_symtab_1): Set symtab->primary to tell objfile_relocate to do relocations for our symbols. * (ecoff_relocate_efi): New routine to relocate adr field of PDRs (which hang off of the symbol table). * Use prim_record_minimal_symbols_and_info instead of prim_record_minimal_symbols to supply section info to make minimal symbol relocations work. * minsyms.c (prim_record_minimal_symbols_and_info): If section is -1, try to deduce it from ms_type. * objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where appropriate. Handle relocation of MIPS_EFI symbols special. Also, add code to relocate objfile->sections data structure. * remote.c (get_offsets): Use new protocol message to acquire section offsets from the target. * (remote_wait): Get rid of relocation stuff. That's all handled by objfile_relocate now. * config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h. * config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and VM_MIN_ADDRESS. * config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
1994-03-19 * Makefile.in (TAGS): Use variables directly, rather than usingJim Kingdon1-1/+1
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster and means that these filenames no longer need be unique across all the config/* directories. * configure.in: Put the config/*/ into TM_FILE, etc. * m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk and trapv exceptions. * target.h (struct section_table), objfiles.h (struct obj_section): Change name of field sec_ptr to the_bfd_section. More mnemonic and avoids the (sort of, for the ptx compiler) name clash with the name of the typedef. * exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c, solib.c, irix5-nat.c, objfiles.c, remote.c: Change users. * utils.c: Include readline.h. * Makefile.in (utils.o): Add dependency. * remote.c (getpkt): Add support for run-length encoding.
1994-03-02 * os9kread.c (os9k_process_one_symbol): RenameJim Kingdon1-116/+0
VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK. * symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not (CORE_ADDR)0, from target_link, since that is what it uses. Process name at end, not during parsing (like we did before Kung's change), so that -readnow and -mapped can appear anywhere. Make text_relocation a local variable. * config/i386/i386os9k.mt: Fix comment. * Makefile.in (ALLDEPFILES): Add remote-os9k.c. * os9kread.c: Put "comments" after #endif inside /* */. * stabsread.h: Add os9k_stabs variable. * stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol): Set it. * stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol descriptor in global_symbols not local_symbols. (read_type): If os9k_stabs, accept 'c', 'i', and 'b' type descriptors. (read_type): If os9k_stabs, accept function parameters after 'f' type descriptor. (read_array_type): If os9k_stabs, don't expect index type and expect lower and upper to be separated by ',' not ';'. (read_enum_type): If os9k_stabs, read a number before the first enumeration constant. (os9k_init_type_vector): New function. (dbx_lookup_type): Call it when starting new type vector. * config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION. * (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol. * os9kstab.c: Removed. * Makefile.in: Update accordingly. * objfiles.c (objfile_relocate_data): Removed. * remote-os9k.c (rombug_wait): Call objfile_relocate not objfile_relocate_data. * objfiles.h, objfiles.c: Remove find_pc_objfile. * remote-os9k.c (rombug_wait): Call find_pc_section not find_pc_objfile. * main.c (quit_command): Check inferior_pid; revert Kung change. * remote-os9k.c (rombug_create_inferior): Set inferior_pid.
1994-03-01Modified Files:Kung Hsu1-0/+116
ChangeLog objfiles.c objfiles.h symfile.c target.c main.c Makefile.in configure.in Added Files: os9kread.c os9kstab.c remote-os9k.c * os9kread.c: New file to read os9000 style symbo table. * os9kstab.c: new file to read os9000 style stabs. * remote-os9k.c: remote protocol talking to os9000 rombug monitor. * objfiles.c (find_pc_objfile): new function to search objfile from pc. * objfiles.c (objfile_relocate_data): new function to relocate data symbols in symbol table. * objfiles.h: Add two aux fields in struct objfile to handle multiple symbol table files situation like in os9000. * symfile.c: Change so 'symbol-file' command can handle multiple files. Also call target_link() to get relocation infos. * target.c (target_link): new function to get relocation info when a symbol file is requested to load. * main.c (quit_command): take out 'inferior_pid != 0' condition, because in cross mode there's no inferior pid, bit they need to be detached. Makefile.in: add os9kread.c os9kstab.c and .o's. configure.in: add i386os9k target. config/i386/i386os9k.mt: new add. config/i386/tm-i386os9k.h: new add.
1994-02-17 * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c,David MacKenzie1-1/+1
osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c, xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
1994-01-04 * objfiles.c (build_objfile_section_table): Don't abort() ifJim Kingdon1-4/+6
objfile->sections is already set. * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD to match recent change to exec.c.
1993-11-01Change the stream argument to _filtered to GDB_FILE *.Thomas Lord1-2/+2
Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-10-30 * symfile.c (reread_symbols): When re-reading symbols, do all theJim Kingdon1-2/+5
right operations ourself, rather than calling symbol_file_command. If we re-read something, call clear_symtab_users not just breakpoint_re_set. * objfiles.h, objfiles.c (build_objfile_section_table): No longer static. * symfile.c (clear_symtab_users): Call clear_pc_function_cache. * coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, paread.c (*_symfile_offsets): Set objfile->num_sections. * remote.c (remote_wait), symfile.c (syms_from_objfile): Don't muck with objfile->num_sections now that all the symbol readers set it. * elfread.c: Clean up obsolete comment about handling only DWARF. * paread.c: Remove comment about how we should use an "ordinary" file format with an hppa suffix. There is nothing ordinary about SOM.
1993-10-21 * Makefile.in (c-exp.tab.o): Remove notice about shift/reduce conflictsJim Kingdon1-68/+77
which no longer occur. gcc -Wall lint: * findvar.c (symbol_read_needs_frame), corelow.c (ignore), inflow.c (gdb_has_a_terminal): Make sure to return a value. * regex.h: Declare re_set_syntax. * printcmd.c: Include valprint.h. * infcmd.c, exec.c, maint.c, core.c: Include language.h. * maint.c: Include expression.h. * infrun.c, fork-child.c, corelow.c, inflow.c: Include thread.h. * inftarg.c: Include command.h. * coredep.c: Include value.h. * c-exp.y, m2-exp.y, ch-exp.y: Include bfd.h, symfile.h and objfiles.h. * ch-typeprint.c: Include typeprint.h. * ch-valprint.c: Include c-lang.h. * nlmread.c: Include buildsym.h. * environ.c: Include gdbcore.h. Only include defs.h once. (set_in_environ): Cast const char * to char * when passing to set_gnutarget. Remove unused variables: * printcmd.c (printf_command): args_to_vprintf. * coffread.c (coff_symfile_init): strsection. Move variables to within the #ifdefs where they are used: * symtab.c (gdb_mangle_name): opname. * inftarg.c (child_attach): pid and exec_file. * inftarg.c (child_detach): siggnal. * objfiles.c (allocate_objfile): mapto, md, and fd. * objfiles.c (free_objfile): mmfd. * infrun.c (wait_for_inferior): Include BPSTAT_WHAT_LAST in switch. * infrun.c (wait_for_inferior): Remove unused same_pid label. * inferior.h: Declare set_sigint_trap and clear_sigint_trap. * parser-defs.h: Declare write_exp_elt_block. * stabsread.h: Declare elfstab_offset_sections and coffstab_build_psymtabs.
1993-10-03 * mipsread.c, objfiles.c, utils.c: Use PTR not void *. RISC/OSJim Kingdon1-2/+2
4.02 lacks void *. * elfread.c: Use void * not PTR inside PARAMS.
1993-09-30 * corelow.c (core_detach): Call reinit_frame_cache.Jim Kingdon1-0/+9
* target.c (target_detach): Don't call generic_mourn_inferior (revert yesterday's change, now handled by core_detach). * objfiles.c (free_objfile): Detach any core file if we call SOLIB_CLEAR. #include target.h.
1993-09-28Tue Sep 28 09:45:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)Jim Kingdon1-2/+2
* symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES. Clean up problems with targets and hosts that have 64 bit longs and pointers and 32 bit ints. * breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c, ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c, expprint.c, gdbtypes.c, infcmd.c, language.c, language.h, m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h, printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c, symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c: Change all printf formats from %x to %lx if outputting an address. Change la_*_format to use long format. local_hex_string, local_hex_string_custom now take an unsigned long argument, change all callers. * coffread.c (read_coff_symtab): Remove superfluous cast for complaint output. * dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int. * findvar.c, value.h (write_register): Change register value to long. * gdbtypes.h (struct type): Change `bitsize' to long as TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer. * inferior.h (struct inferior_status): Change type of stop_pc to CORE_ADDR. * language.h (local_octal_string, local_octal_string_custom): Remove prototype, the functions are neither defined nor used. * mipsread.c (parse_symbol): Use temporary variable for bitsize as f->bitsize is a long now. * objfiles.c (add_to_objfile_sections, build_objfile_section_table): Use unsigned long casts instead of int for abusing sections_end pointer as integer. * stack.c (parse_frame_specification): Change type of `args' to CORE_ADDR for SETUP_ARBITRARY_FRAME. * printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE. * mipsread.c (parse_type): Alpha cc now supports the t->continued bit, update algorithm to match the way the compiler uses it.
1993-09-21(objfile_relocate): Relocate textlow and texthigh in psymtabs.Jim Kingdon1-0/+4
1993-09-21 * elfread.c (record_minimal_symbol_and_info): Guess the section toIan Lance Taylor1-1/+28
use from the type. * objfiles.c: Include gdb-stabs.h for SECT_* macros. (objfile_relocate): Relocate textlow and texthigh in psymtabs. Relocate partial symbols. Check that minimal SYMBOL_SECTION is nonnegative before using it. * symtab.h: Adjust section field comment.
1993-07-27 * breakpoint.c (breakpoint_1): Walk the breakpoint chain to decide ifPeter Schauer1-2/+2
we have breakpoints or watchpoints as we might have to ignore internal breakpoints. Fix gdb core dumps after `file newfile' commands. * symtab.h, symfile.c (clear_symtab_users): New routine which unconditionally clears symtab users. clear_symtab_users_once commented out as it was a noop anyway. * objfiles.c (free_objfile): Don't call clear_symtab_users_once. * objfiles.c (free_all_objfiles), symfile.c (new_symfile_objfile), xcoffexec.c (exec_close): Call clear_symtab_users if necessary. * symfile.c (syms_from_objfile): Install cleanups for errors during symbol reading. * coffread.c, dbxread.c, mipsread.c, xcoffread.c (*_symfile_read): Lint cleanup code, call do_cleanups explicitly. * symfile.c (symbol_file_add): Call new_symfile_objfile and reinit_frame_cache _after_ the new symbols are read in.
1993-04-22 * objfiles.h (obj_section), objfiles.c (build_objfile_section_table):Jim Kingdon1-2/+3
Add objfile field. * objfiles.c (find_pc_section): Return a struct obj_section *. * sparc-tdep.c (in_solib_trampoline): Deal with find_pc_section return. * symfile.c (syms_from_objfile) [IBM6000_TARGET]: Don't use obj_section hack. * xcoffexec (vmap_symtab): Relocate obj_sections. * printcmd.c (containing_function_bounds): Use find_pc_section.
1993-04-13 * objfiles.c (build_objfile_section_table): Cast return valueJim Kingdon1-1/+2
from obstack_finish.
1993-04-07Add section table to objfile struct. Use it for find_pc_section.K. Richard Pixley1-0/+71
* objfiles.c (add_to_objfile_sections, build_objfile_section_table, find_pc_section): new functions. (allocate_objfile): build section table. * objfiles.h (struct obj_section): new structure. (struct objfile): add section table. (find_pc_section): new prototype. * solib.[ch] (find_pc_section_from_so_list): removed. * sparc-tdep.c: include objfiles.h for find_pc_section. include symfile.h for objfiles.h. (in_solib_trampoline): adjusted for new find_pc_section prototype. Removed BAD_RICH_HACK ifdefs. * symfile.c (syms_from_objfile): offset objfile sections. (find_pc_section): removed. Also removed BAD_RICH_HACK ifdefs. * symfile.h (find_pc_section): prototype removed. Also fixed comment typo NUL -> NULL. * target.[ch] (find_pc_section_from_targets): removed. * config/sparc/tm-sun4sol2.h (BAD_RICHH_HACK): removed.
1993-03-26 * Clean up xcoff relocation.Jim Kingdon1-1/+90
objfiles.h (struct objfiles): Add section_offsets, num_sections. symfile.c (syms_from_objfile), xcoffread.c (xcoff_symfile_offsets): Set them. symtab.h (struct general_symbol_info): Add section field. minsyms.c (prim_record_minimal_symbol{,_and_info}): Set it. xcoffread.c: Set section for symbols and msymbols. (struct symtab): Add block_line_section field. buildsym.c (end_symtab): Set it. (end_symtab and callers): Add section parameter. objfiles.c (objfile_relocate): New funciton. xcoffexec.c (vmap_symtab): Use it. xcoffsolib.h (struct vmap): Remove unused fields. config/rs6000/tm-rs6000.h, stack.c, xcoffexec.c: Remove CORE_NEEDS_RELOCATION, symtab_relocated. config/rs6000/tm-rs6000.h: Remove use of loadinfotext. rs6000-tdep.c: Make loadinfotext static. breakpoint.c (fixup_breakpoints): Doc fix. symtab.h (struct symtab), config/rs6000/tm-rs6000.h, buildsym.c (end_symtab): primary field replaces nonreloc.
1992-08-11 * Makefile.in (VERSION): Bump to 4.6.3.Fred Fish1-1/+2
* dwarfread.c (scan_partial_symbols): Skip over DIE's within function scopes when building partial symbol tables. * objfiles.c (open_existing_mapped_file): Make it clear in warning message that out of date mapped files are ignored. * symtab.c (lookup_symtab_1, lookup_symbol): Print compilation unit source file name in error message.
1992-08-01 * dwarfread.c (struct dieinfo): Remove obsolete at_visibility,Fred Fish1-13/+15
at_import, at_frame_base. * dwarfread.c (completedieinfo): Remove cases for obsolete AT_visibility, AT_import, and AT_frame_base attributes. * breakpoint.h (BREAKPOINT_MAX): Increase from 10 to 16 for i860, which can keep up to 4 shadow breakpoints. * tm-stratus.h (USG): Define. * tm-stratus.h (TARGET_BYTE_ORDER): Define to BIG_ENDIAN. * xm-stratus.h (HOST_BYTE_ORDER): Define to BIG_ENDIAN. * xm-stratus.h (xm-sysv4.h): Include, name changed from xm-svr4.h. * xm-stratus.h (NO_JOB_CONTROL): Remove define. * config/stratus.mt (TDEPFILES): Include files available from stratus that are not yet in release pending receipt of paperwork at FSF. * buildsym.c (finish_block): Minor code format change. * gdbtypes.h (struct field): Add to comments. * gdbtypes.h (virtual_field_bits): Add to comments. * objfiles.c (allocate_objfile): Change obstack interface to match FSF merging efforts.
1992-07-21 * buildsym.c (read_struct_type): Initialize structs allocatedFred Fish1-16/+12
with alloca, to avoid using random values from stack later on. * defs.h (fprintf_filtered): Add prototype. * gdbtypes.c (check_stub_method): Fix misleading comments. * gdbtypes.c (print_arg_types, dump_fn_fieldlists): New maint support functions. * gdbtypes.c (print_cplus_stuff, recursive_dump_type): Many small changes to maint support functions. * gdbtypes.h (cplus_struct_type): Reorganize member ordering for some fields and expand comments. * objfiles.c (allocate_objfile): Use new obstack_alloc_arg macro and track change to obstack_full_begin macro. * utils.c (fprintfi_filtered): New function. * valprint.c (type_print_base): Fixup field printing to not print extraneous lines and not print bogus "no data fields" messages for C++ classes with no data members. Also use new fprintfi_filtered function.
1992-07-04 * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c,Fred Fish1-4/+4
core.c, cplus-dem.c, dbxread.c, dwarfread.c, elfread.c, environ.c, eval.c, findvar.c, gdbtypes.c, hppabsd-tdep.c, hppahpux-tdep.c, i386-tdep.c, ieee-float.c, infcmd.c, inflow.c, infptrace.c, infrun.c, m2-exp.y, mipsread.c, objfiles.c, parse.c, procfs.c, putenv.c, remote-mm.c, remote-vx.c, solib.c, sparc-tdep.c, sparc-xdep.c, stack.c, symfile.c, symtab.c, symtab.h, target.c, tm-i386v.h, tm-sparc.h, utils.c, valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Remove "(void)" casts from function calls where the return value is ignored, in accordance with GNU coding standards.
1992-06-29 * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c,Fred Fish1-1/+0
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint. * breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c, findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c, putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h, utils.c, valarith.c, valops.c, valprint.c, values.c: Replace bcopy() use with memcpy(), which is more standard and can take advantage of gcc's builtin functions for increased performance. * breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c, ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h, target.c, values.c: Replace bzero() use with memset(), which is more standard and can take advantage of gcc's builtin functions for increased performance. * i386-tdep.c, main.c, valprint.c: Replace bcmp() use with memcmp(), which is more standard and can take advantage of gcc's builtin functions for increased performance.
1992-06-13* elfread.c (record_minimal_symbol_and_info): Kludged to putJohn Gilmore1-4/+6
extra info in the minimal symbol. (elf_symtab_read): The extra info is the size of an ELF object, which was kludged to us in the `udata' field of the BFD symbol. Gag me with a crowbar... (elf_symfile_read): Keep track of both the absolute load address, and the offset between load addr and symbols. Handle STABS as well as DWARF sections, passing the absolute load address to elfstab_build_psymtabs. * objfiles.c (free_objfile): Eliminate storage leaks. Contributed by <Peter.Schauer@regent.e-technik.tu-muenchen.dbp.de>. * symfile.c (symfile_bfd_open): Comment where name is freed. * symmisc.c (extend_psymbol_list): Comment where list is freed.
1992-05-17 * inflow.c (new_tty): Temporarily ignore SIGTTOU whenFred Fish1-16/+35
disconnecting from controlling terminal, to avoid gdb hanging on SVR4. Fixes bug reported by Oliver Okrongli. * procfs.c (PROC_NAME_FMT): Change format to match default used by system, as suggested by Oliver Okrongli. * tm-68k.h (FRAME_FIND_SAVED_REGS): Apply missing parentheses bug fix from Brent Townshend (bst%tt@cam.ORG). * c-exp.y (nonempty_typelist): Fix memory overrun bug reported by turlais@rechser.total.fr. * dwarfread.c (decode_subscr_data): Fix bug in calculation of length of non-zero lowerbound arrays. Bug fix from Peggy Fieland. * objfiles.h (unlink_objfile): Add prototype. * objfiles.c (unlink_objfile): Add function. * objfiles.c (free_objfile): Call unlink_objfile. * objfiles.c (allocate_objfile): Call unlink_objfile on newly remapped objfiles. Bug reported by hahn@sunshine.labs.tek.com. Also, discard old possibly bogus sf struct. * symfile.c (symbol_file_add): Call init_entry_point_info() and find_sym_fns() for remapped symbol files, in case of any changes since the last mapping.
1992-05-06 * cplus-dem.c (do_args): Handle void args the same as others.Fred Fish1-1/+11
* objfiles.c (free_objfile): Only try to unmap files when reusable objfiles are supported. * valprint.c (type_print_varspec_suffix): Add parameter that specifies if C++ demangling included function arguments. Use it to suppress printing extra pair of ()'s. * valprint.c (type_print_1): Fix problem with printing demangled C++ function types where demangled type includes the function args.
1992-04-18Back out of TYPE_FLAG_FUND_TYPE change, solve the problem in valprint.c byFred Fish1-36/+104
just printing the type name from the type if it is not otherwise handled. Implement new handling of the ".syms" file for reusable symbol files.
1992-04-17Fix to dwarfread.c to target pointer and target long sizes, fixes forFred Fish1-15/+53
mapped symbol file handling, and a couple of other misc small fixes.
1992-03-29Create and use macros for iterating on symtabs, psymtabs, msymbols.John Gilmore1-115/+9
* minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-27Mostly changes to dbxread.c to preserve stringtab's on a per-objfileFred Fish1-4/+5
basis, for use in expanding psymtabs to full symtabs. See ChangeLog for other details.
1992-03-21Many changes, most related to creating entry point information on a per-objfileFred Fish1-1/+6
basis. See comments in objfiles.h and details in ChangeLog. Also remove redundant definitions of FRAME_CHAIN_VALID from most of the tm-* files and use a default definition in frame.h.
1992-03-19 * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c,Fred Fish1-3/+14
elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-18Changes to implement the -mapped and -readnow options for commands thatFred Fish1-19/+21
read symbol tables.
1992-03-15Globs of changes. See the ChangeLog for details. Most related toFred Fish1-39/+223
using the new mmalloc package.
1992-03-03Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com)Michael Tiemann1-1/+0
* All GDB files that #include defs.h: Removed stdio.h. (defs.h): #include stdio.h. This has been tested by building GDBs for all targets hosted on Sun4. None of the build problems were related to stdio.h inclusion. (n.b. many configurations don't build for other reasons.)
1992-03-02More changes, mostly from IBM for rs6000. (See ChangeLog.)Per Bothner1-2/+2
1992-03-01More changes, mostly from IBM, for the rs6000. See ChangeLog.Per Bothner1-2/+2
1992-02-27* breakpoint.h (ALL_BREAKPOINTS_SAFE): Add.John Gilmore1-0/+14
* breakpoint.c (breakpoint_re_set): Use ALL_BREAKPOINTS_SAFE. * symtab.c (find_pc_symtab): Handle having no objfiles. * infcmd.c: Fix comment. * objfiles.c (free_all_objfiles): Add. * symfile.h (ALL_OBJFILES, ALL_OBJFILES_SAFE): Add. * symfile.c (symbol_file_command): free all objfiles when specifying a new symbol file. (reread_symbols): Stat the file name, don't fstat the descriptor.
1992-02-22* Check in Fred Fish's changes in these modules. FredJohn Gilmore1-0/+326
will make ChangeLog entries for all of them.