| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-17 Tom de Vries <tdevries@suse.de>
* arm-nbsd-nat.c: Fix typos in comments.
* arm-tdep.c: Same.
* darwin-nat-info.c: Same.
* dwarf2read.c: Same.
* elfread.c: Same.
* event-top.c: Same.
* findvar.c: Same.
* gdbtypes.c: Same.
* hppa-tdep.c: Same.
* i386-tdep.c: Same.
* jit.c: Same.
* main.c: Same.
* mdebugread.c: Same.
* moxie-tdep.c: Same.
* nto-procfs.c: Same.
* osabi.c: Same.
* ppc-linux-tdep.c: Same.
* remote.c: Same.
* riscv-tdep.c: Same.
* s390-tdep.c: Same.
* sh-tdep.c: Same.
* sparc-linux-tdep.c: Same.
* sparc-nat.c: Same.
* stack.c: Same.
* target-descriptions.c: Same.
* top.c: Same.
* varobj.c: Same.
Change-Id: I6047967abd2d51c9000dea15184d19f4e952c3ff
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
Currently the target pid_to_str method returns a const char *, so many
implementations have a static buffer that they update. This patch
changes these methods to return a std::string instead. I think this
is cleaner and avoids possible gotchas when calling pid_to_str on
different ptids in a single statement. (Though no such calls exist
currently.)
This also updates various helper functions, and the gdbarch pid_to_str
methods.
I also made a best effort to fix all the callers, but I can't build
some of the *-nat.c files.
Tested by the buildbot.
gdb/ChangeLog
2019-03-13 Tom Tromey <tromey@adacore.com>
* i386-gnu-nat.c (i386_gnu_nat_target::fetch_registers)
(i386_gnu_nat_target::store_registers): Update.
* target-debug.h (target_debug_print_std_string): New macro.
* x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update.
* windows-tdep.c (display_one_tib): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* top.c (print_inferior_quit_action): Update.
* thread.c (thr_try_catch_cmd): Update.
(add_thread_with_info): Update.
(thread_target_id_str): Update.
(thr_try_catch_cmd): Update.
(thread_command): Update.
(thread_find_command): Update.
* record-btrace.c (record_btrace_target::info_record)
(record_btrace_resume_thread, record_btrace_target::resume)
(record_btrace_cancel_resume, record_btrace_step_thread)
(record_btrace_target::wait, record_btrace_target::wait)
(record_btrace_target::wait, record_btrace_target::stop): Update.
* progspace.c (print_program_space): Update.
* process-stratum-target.c
(process_stratum_target::thread_address_space): Update.
* linux-fork.c (linux_fork_mourn_inferior)
(detach_checkpoint_command, info_checkpoints_command)
(linux_fork_context): Update.
(linux_fork_detach): Update.
(class scoped_switch_fork_info): Update.
(delete_checkpoint_command): Update.
* infrun.c (follow_fork_inferior): Update.
(follow_fork_inferior): Update.
(proceed_after_vfork_done): Update.
(handle_vfork_child_exec_or_exit): Update.
(follow_exec): Update.
(displaced_step_prepare_throw): Update.
(displaced_step_restore): Update.
(start_step_over): Update.
(resume_1): Update.
(clear_proceed_status_thread): Update.
(proceed): Update.
(print_target_wait_results): Update.
(do_target_wait): Update.
(context_switch): Update.
(stop_all_threads): Update.
(restart_threads): Update.
(finish_step_over): Update.
(handle_signal_stop): Update.
(switch_back_to_stepped_thread): Update.
(keep_going_pass_signal): Update.
(print_exited_reason): Update.
(normal_stop): Update.
* inferior.c (inferior_pid_to_str): Change return type.
(print_selected_inferior): Update.
(add_inferior): Update.
(detach_inferior): Update.
* dummy-frame.c (fprint_dummy_frames): Update.
* dcache.c (dcache_info_1): Update.
* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
(btrace_fetch, btrace_clear): Update.
* linux-tdep.c (linux_core_pid_to_str): Change return type.
* i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Change return
type.
* fbsd-tdep.c (fbsd_core_pid_to_str): Change return type.
* sol2-tdep.h (sol2_core_pid_to_str): Change return type.
* sol2-tdep.c (sol2_core_pid_to_str): Change return type.
* gdbarch.c, gdbarch.h: Rebuild.
* gdbarch.sh (core_pid_to_str): Change return type.
* windows-nat.c (struct windows_nat_target) <pid_to_str>: Change
return type.
(windows_nat_target::pid_to_str): Change return type.
(windows_delete_thread): Update.
(windows_nat_target::attach): Update.
(windows_nat_target::files_info): Update.
* target-delegates.c: Rebuild.
* sol-thread.c (class sol_thread_target) <pid_to_str>: Change
return type.
(sol_thread_target::pid_to_str): Change return type.
* remote.c (class remote_target) <pid_to_str>: Change return
type.
(remote_target::pid_to_str): Change return type.
(extended_remote_target::attach, remote_target::remote_stop_ns)
(remote_target::remote_notif_remove_queued_reply)
(remote_target::push_stop_reply, remote_target::disable_btrace):
Update.
(extended_remote_target::attach): Update.
* remote-sim.c (struct gdbsim_target) <pid_to_str>: Change return
type.
(gdbsim_target::pid_to_str): Change return type.
* ravenscar-thread.c (struct ravenscar_thread_target)
<pid_to_str>: Change return type.
(ravenscar_thread_target::pid_to_str): Change return type.
* procfs.c (class procfs_target) <pid_to_str>: Change return
type.
(procfs_target::pid_to_str): Change return type.
(procfs_target::attach): Update.
(procfs_target::detach): Update.
(procfs_target::fetch_registers): Update.
(procfs_target::store_registers): Update.
(procfs_target::wait): Update.
(procfs_target::files_info): Update.
* obsd-nat.c (obsd_nat_target::pid_to_str): Change return type.
* nto-procfs.c (struct nto_procfs_target) <pid_to_str>: Change
return type.
(nto_procfs_target::pid_to_str): Change return type.
(nto_procfs_target::files_info, nto_procfs_target::attach): Update.
* linux-thread-db.c (class thread_db_target) <pid_to_str>: Change
return type.
* linux-nat.c (linux_nat_target::pid_to_str): Change return type.
(exit_lwp): Update.
(attach_proc_task_lwp_callback, get_detach_signal)
(detach_one_lwp, resume_lwp, linux_nat_target::resume)
(linux_nat_target::resume, wait_lwp, stop_callback)
(maybe_clear_ignore_sigint, stop_wait_callback, status_callback)
(save_stop_reason, select_event_lwp, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps)
(linux_nat_target::wait, linux_nat_stop_lwp): Update.
* inf-ptrace.c (inf_ptrace_target::pid_to_str): Change return
type.
(inf_ptrace_target::attach): Update.
(inf_ptrace_target::files_info): Update.
* go32-nat.c (struct go32_nat_target) <pid_to_str>: Change return
type.
(go32_nat_target::pid_to_str): Change return type.
* gnu-nat.c (gnu_nat_target::pid_to_str): Change return type.
(gnu_nat_target::wait): Update.
(gnu_nat_target::wait): Update.
(gnu_nat_target::resume): Update.
* fbsd-nat.c (fbsd_nat_target::pid_to_str): Change return type.
(fbsd_nat_target::wait): Update.
* darwin-nat.c (darwin_nat_target::pid_to_str): Change return
type.
(darwin_nat_target::attach): Update.
* corelow.c (class core_target) <pid_to_str>: Change return type.
(core_target::pid_to_str): Change return type.
* target.c (normal_pid_to_str): Change return type.
(default_pid_to_str): Likewise.
(target_pid_to_str): Change return type.
(target_translate_tls_address): Update.
(target_announce_detach): Update.
* bsd-uthread.c (struct bsd_uthread_target) <pid_to_str>: Change
return type.
(bsd_uthread_target::pid_to_str): Change return type.
* bsd-kvm.c (class bsd_kvm_target) <pid_to_str>: Change return
type.
(bsd_kvm_target::pid_to_str): Change return type.
* aix-thread.c (class aix_thread_target) <pid_to_str>: Change
return type.
(aix_thread_target::pid_to_str): Change return type.
* target.h (struct target_ops) <pid_to_str>: Change return type.
(target_pid_to_str, normal_pid_to_str): Likewise.
* obsd-nat.h (class obsd_nat_target) <pid_to_str>: Change return
type.
* linux-nat.h (class linux_nat_target) <pid_to_str>: Change return
type.
* inf-ptrace.h (struct inf_ptrace_target) <pid_to_str>: Change
return type.
* gnu-nat.h (struct gnu_nat_target) <pid_to_str>: Change return
type.
* fbsd-nat.h (class fbsd_nat_target) <pid_to_str>: Change return
type.
* darwin-nat.h (class darwin_nat_target) <pid_to_str>: Change
return type.
|
|
A customer noticed some mildly odd MI output, where CLI output was
split into multiple MI strings at unusual boundaries, like this:
~"$1 = (b => true"
~", p => 0x407260"
This is technically correct according to the MI spec, but still
unusual, in that there's no particular reason for the string to be
split where it is.
I tracked this down to a call to gdb_flush in generic_val_print.
Then, I went through all calls to gdb_flush and removed the ones I
thought were superfluous. In particular:
* Any call in the value-printing code;
* Likewise the type-printing code (just a single call); and
* Any call that immediately followed a printf that obviously
ended with a newline, my belief being that gdb's standard output
streams are line buffered (by inheriting the behavior from stdio)
Regression tested on x86-64 Fedora 29.
I didn't add a new test case. I tend to think we don't necessarily
want to specify this behavior in the tests. Let me know what you
think of this.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach)
(windows_nat_target::detach): Don't call gdb_flush.
* valprint.c (generic_val_print, val_print, val_print_string):
Don't call gdb_flush.
* utils.c (defaulted_query): Don't call gdb_flush.
* typeprint.c (print_type_scalar): Don't call gdb_flush.
* target.c (target_announce_detach): Don't call gdb_flush.
* sparc64-tdep.c (adi_print_versions): Don't call gdb_flush.
* remote.c (extended_remote_target::attach): Don't call
gdb_flush.
* procfs.c (procfs_target::detach): Don't call gdb_flush.
* printcmd.c (do_examine): Don't call gdb_flush.
(info_display_command): Don't call gdb_flush.
* p-valprint.c (pascal_val_print): Don't call gdb_flush.
* nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush.
* memattr.c (info_mem_command): Don't call gdb_flush.
* mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush.
* m2-valprint.c (m2_val_print): Don't call gdb_flush.
* infrun.c (follow_exec, handle_command): Don't call gdb_flush.
* inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush.
* hppa-tdep.c (unwind_command): Don't call gdb_flush.
* gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush.
(gnu_nat_target::detach): Don't call gdb_flush.
* f-valprint.c (f_val_print): Don't call gdb_flush.
* darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush.
* cli/cli-script.c (read_command_lines): Don't call gdb_flush.
* cli/cli-cmds.c (shell_escape, print_disassembly): Don't call
gdb_flush.
* c-valprint.c (c_val_print): Don't call gdb_flush.
* ada-valprint.c (ada_print_scalar): Don't call gdb_flush.
|
|
This replaces the pointer and length parameters of target_pass_signals
and target_program_signals with a gdb::array_view parameter, and fixes
the fallout.
In infrun.c, the signal_stop, signal_print, signal_program,
signal_catch, signal_pass globals are currently pointers to
heap-allocated memory. I see no point in that, so I converted them to
arrays. This allows simplifying the calls to
target_pass_signals/target_program_signals, since we can pass the
array directly, which can implicitly convert to gdb::array_view.
gdb/ChangeLog:
2019-01-24 Pedro Alves <palves@redhat.com>
* infrun.c (signal_stop, signal_print, signal_program)
(signal_catch, signal_pass): Now arrays instead of pointers.
(update_signals_program_target, do_target_resume)
(signal_catch_update, handle_command, _initialize_infrun): Adjust.
* linux-nat.c (linux_nat_target::pass_signals)
(linux_nat_target::create_inferior, linux_nat_target::attach):
Adjust.
* linux-nat.h (linux_nat_target::pass_signals): Adjust.
* nto-procfs.c (nto_procfs_target::pass_signals): Adjust.
* procfs.c (procfs_target::pass_signals): Adjust.
* record-full.c (record_full_target::resume): Adjust.
* remote.c (remote_target::pass_signals)
(remote_target::program_signals): Adjust.
* target-debug.h (target_debug_print_signals): Now takes a
gdb::array_view as parameter. Adjust.
* target.h (target_ops) <pass_signals, program_signals>: Replace
pointer and length parameters with gdb::array_view.
(target_pass_signals, target_program_signals): Likewise.
* target-delegates.c: Regenerate.
|
|
This constifies the final parameter to target_pass_signals and
target_program_signals and updates the rest of gdb.
Note that I have no way to test the nto-procfs.c change.
gdb/ChangeLog
2019-01-14 Tom Tromey <tom@tromey.com>
* target-debug.h (target_debug_print_signals): Constify.
* nto-procfs.c (nto_procfs_target::pass_signals): Update.
* procfs.c (procfs_target::pass_signals): Update.
* linux-nat.c (linux_nat_target::pass_signals): Update.
* linux-nat.h (class linux_nat_target) <pass_signals>: Update.
* target-delegates.c: Rebuild.
* remote.c (remote_target::program_signals): Update.
(remote_target::pass_signals): Update.
* target.c (target_pass_signals): Constify argument.
(target_program_signals): Likewise.
* target.h (struct target_ops) <pass_signals, program_signals>:
Constify argument.
(target_pass_signals, target_program_signals): Constify argument.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
|
|
I searched for other spots that did not use the GNU style for
metasyntactic syntactic variables. This patch fixes most of the ones
I found in gdb proper. There are a few remaining in MI, but I was
unsure whether those should be touched.
gdb/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* top.c (new_ui_command): Use GNU style for metasyntactic
variables.
* breakpoint.c (stopat_command): Use GNU style for metasyntactic
variables.
* maint.c (maintenance_translate_address): Remove "<>" around
text.
* interps.c (interpreter_exec_cmd): Use GNU style for
metasyntactic variables.
* nto-procfs.c (nto_procfs_target_info): Use GNU style for
metasyntactic variables.
* tracepoint.c (tfind_range_command): Use GNU style for
metasyntactic variables.
(tfind_outside_command): Likewise.
(_initialize_tracepoint): Likewise.
* remote.c (extended_remote_target::create_inferior): Use GNU
style for metasyntactic variables.
* sparc64-tdep.c (adi_examine_command): Use GNU style for
metasyntactic variables.
(adi_assign_command): Likewise.
gdb/testsuite/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* gdb.base/new-ui.exp (do_execution_tests): Update.
* gdb.base/dbx.exp (test_breakpoints): Update.
|
|
target_have_continuable_watchpoint isn't used anywhere so remove it.
The property isn't necessary because checking for "continuable" is the
same as checking for "!steppable && !non-steppable".
gdb/ChangeLog:
2018-08-31 Pedro Alves <palves@redhat.com>
* nto-procfs.c (nto_procfs_target::have_continuable_watchpoint):
Delete.
* s390-linux-nat.c
(s390_linux_nat_target::have_continuable_watchpoint): Delete.
* target.h (target_ops::have_continuable_watchpoint): Delete.
(target_have_continuable_watchpoint): Delete.
* x86-nat.h (x86_nat_target::have_continuable_watchpoint): Delete.
* target-delegates.c: Regenerate.
|
|
Remove ptid_equal in favor of using "==".
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_equal): Remove.
* common/ptid.h (ptid_equal): Don't declare.
* ada-tasks.c: Update.
* breakpoint.c: Update.
* common/agent.c: Update.
* corelow.c: Update.
* darwin-nat-info.c: Update.
* darwin-nat.c: Update.
* dcache.c: Update.
* dtrace-probe.c: Update.
* dummy-frame.c: Update.
* fbsd-nat.c: Update.
* frame.c: Update.
* gdbthread.h: Update.
* gnu-nat.c: Update.
* go32-nat.c: Update.
* inf-loop.c: Update.
* inf-ptrace.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-thread-db.c: Update.
* mi/mi-cmd-var.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* nto-procfs.c: Update.
* ppc-linux-tdep.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* ravenscar-thread.c: Update.
* regcache.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* sol-thread.c: Update.
* solib.c: Update.
* target.c: Update.
* tui/tui-stack.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* windows-tdep.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* win32-low.c: Update.
|
|
This removes ptid_get_tid in favor of calling the ptid_t::tid method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_tid): Remove.
* common/ptid.h (ptid_get_tid): Don't declare.
* ada-tasks.c: Update.
* aix-thread.c: Update.
* bsd-uthread.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* i386-darwin-nat.c: Update.
* infrun.c: Update.
* linux-tdep.c: Update.
* nto-procfs.c: Update.
* ppc-ravenscar-thread.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* sol-thread.c: Update.
* sparc-ravenscar-thread.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* target.c: Update.
|
|
This removes ptid_get_pid in favor of calling the ptid_t::pid method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_pid): Remove.
* common/ptid.h (ptid_get_pid): Don't declare.
* aarch64-linux-nat.c: Update.
* ada-lang.c: Update.
* aix-thread.c: Update.
* alpha-bsd-nat.c: Update.
* amd64-fbsd-nat.c: Update.
* amd64-linux-nat.c: Update.
* arm-linux-nat.c: Update.
* arm-nbsd-nat.c: Update.
* auxv.c: Update.
* break-catch-syscall.c: Update.
* breakpoint.c: Update.
* bsd-uthread.c: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fbsd-tdep.c: Update.
* gcore.c: Update.
* gnu-nat.c: Update.
* hppa-nbsd-nat.c: Update.
* hppa-obsd-nat.c: Update.
* i386-fbsd-nat.c: Update.
* ia64-linux-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* inferior.h: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* m68k-bsd-nat.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* mips-linux-nat.c: Update.
* mips-nbsd-nat.c: Update.
* mips64-obsd-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/aarch64-linux.c: Update.
* nat/linux-btrace.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* ppc-linux-nat.c: Update.
* ppc-nbsd-nat.c: Update.
* ppc-obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* record.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sh-nbsd-nat.c: Update.
* sol-thread.c: Update.
* sparc-nat.c: Update.
* sparc64-tdep.c: Update.
* spu-linux-nat.c: Update.
* spu-tdep.c: Update.
* target-debug.h: Update.
* target.c: Update.
* thread.c: Update.
* tid-parse.c: Update.
* tracefile-tfile.c: Update.
* vax-bsd-nat.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* x86-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-mips-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* tracepoint.c: Update.
|
|
This removes pid_to_ptid in favor of calling the ptid_t constructor
directly.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (pid_to_ptid): Remove.
* common/ptid.h (pid_to_ptid): Don't declare.
* aix-thread.c: Update.
* arm-linux-nat.c: Update.
* common/ptid.c: Update.
* common/ptid.h: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fork-child.c: Update.
* gnu-nat.c: Update.
* go32-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/fork-inferior.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* procfs.c: Update.
* progspace.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sol-thread.c: Update.
* spu-linux-nat.c: Update.
* target.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-ppc-low.c: Update.
* linux-x86-low.c: Update.
* proc-service.c: Update.
* server.c: Update.
* spu-low.c: Update.
* thread-db.c: Update.
* win32-low.c: Update.
|
|
This removes ptid_build in favor of simply calling the ptid_t
constructor directly.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.h (ptid_build): Don't declare.
* common/ptid.c (ptid_build): Remove.
* aix-thread.c: Update.
* bsd-kvm.c: Update.
* bsd-uthread.c: Update.
* common/agent.c: Update.
* common/ptid.c: Update.
* common/ptid.h: Update.
* corelow.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* gnu-nat.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-thread-db.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* ravenscar-thread.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* sol-thread.c: Update.
* target.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* lynx-low.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* spu-low.c: Update.
* thread-db.c: Update.
* win32-low.c: Update.
|
|
The buildbot pointed out that arm-linux-nat.c was not properly using
"beneath" as a method. A search showed a few more places with this
issue.
Tested by the buildbot, though of course this only checked
arm-linux-nat.c. Nevertheless I'm checking this in under the obvious
rule.
gdb/ChangeLog
2018-06-10 Tom Tromey <tom@tromey.com>
* procfs.c (procfs_target::xfer_partial): Use "beneath" as a
method.
* nto-procfs.c (nto_procfs_target::xfer_partial): Use "beneath" as
a method.
* go32-nat.c (go32_nat_target::xfer_partial): Use "beneath" as a
method.
* arm-linux-nat.c (arm_linux_nat_target::read_description): Use
"beneath" as a method.
* arm-fbsd-nat.c (arm_fbsd_nat_target::read_description):
Use "beneath" as a method.
|
|
Remove regcache_raw_collect, update callers to use
regcache::raw_collect.
gdb/ChangeLog:
* regcache.h (regcache_raw_collect): Remove, update callers to
use regcache::raw_collect.
* regcache.c (regcache_raw_collect): Remove.
|
|
Remove regcache_get_ptid, change all callers to call the regcache method
directly.
gdb/ChangeLog:
* regcache.h (regcache_get_ptid): Remove, update all callers to
call regcache::ptid instead.
* regcache.c (regcache_get_ptid): Remove.
|
|
This removes both copies of do_closedir_cleanup in favor of a new
unique_ptr specialization.
Tested by the buildbot, though I'm not sure that these code paths are
exercised there.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* nto-procfs.c (do_closedir_cleanup): Remove.
(procfs_pidlist): Use gdb_dir_up.
* procfs.c (do_closedir_cleanup): Remove.
(proc_update_threads): Use gdb_dir_up.
* common/filestuff.h (struct gdb_dir_deleter): New.
(gdb_dir_up): New typedef.
|
|
Currently, to open a target, with "target TARGET_NAME", GDB finds the
target_ops instance with "TARGET_NAME" as short name, and then calls
its target_ops::open virtual method. In reality, there's no actual
target/name lookup, a pointer to the target_ops object was associated
with the "target TARGET_NAME" command at add_target time (when GDB is
initialized), as the command's context.
This creates a chicken and egg situation. Consider the case of
wanting to open multiple remote connections. We want to be able to
have one remote target_ops instance per connection, but, if we're not
connected yet, so we don't yet have an instance to call target->open()
on...
This patch fixes this by separating out common info about a target_ops
to a separate structure (shortname, longname, doc), and changing the
add_target routine to take a reference to such an object instead of a
pointer to a target_ops, and a pointer to a factory function that is
responsible to open an instance of the corresponding target when the
user types "target TARGET_NAME".
-extern void add_target (struct target_ops *);
+extern void add_target (const target_info &info, target_open_ftype *func);
I.e. this factory function replaces the target_ops::open virtual
method.
For static/singleton targets, nothing changes, the target_open_ftype
function pushes the global target_ops instance on the target stack.
At target_close time, the connection is tor down, but the global
target_ops object remains live.
However, targets that support being open multiple times will make
their target_open_ftype routine allocate a new target_ops instance on
the heap [e.g., new remote_target()], and push that on the stack. At
target_close time, the new object is destroyed (by the
target_ops::close virtual method).
Both the core target and the remote targets will support being open
multiple times (others could/should too, but those were my stopping
point), but not in this patch yet. We need to get rid of more globals
first before that'd be useful.
Native targets are somewhat special, given find_default_run_target &
friends. Those routines also expect to return a target_ops pointer,
even before we've open the target. However, we'll never need more
than one instance of the native target, so we can assume/require that
native targets are global/simpletons, and have the backends register a
pointer to the native target_ops. Since all native targets inherit
inf_child_target, we can centralize that registration. See
add_inf_child_target, get_native_target/set_native_target and
find_default_run_target.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Use
add_inf_child_target.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Use
add_inf_child_target.
* aix-thread.c (aix_thread_target_info): New.
(aix_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Use
add_inf_child_target.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Use
add_inf_child_target.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Use
add_inf_child_target.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Use
add_inf_child_target.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Use
add_inf_child_target.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Use
add_inf_child_target.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Use
add_inf_child_target.
* arm-linux-nat.c (_initialize_arm_linux_nat): Use
add_inf_child_target.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Use
add_inf_child_target.
* bfd-target.c (target_bfd_target_info): New.
(target_bfd) <shortname, longname, doc>: Delete.
<info>: New.
* bsd-kvm.c (bsd_kvm_target_info): New.
(bsd_kvm_target) <shortname, longname, doc>: Delete.
<info>: New.
(bsd_kvm_target::open): Rename to ...
(bsd_kvm_target_open): ... this. Adjust.
* bsd-uthread.c (bsd_uthread_target_info): New.
(bsd_uthread_target) <shortname, longname, doc>: Delete.
<info>: New.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_target_info): New.
(core_target) <shortname, longname, doc>: Delete.
<info>: New.
(core_target::open): Rename to ...
(core_target_open): ... this. Adjust.
* ctf.c (ctf_target_info): New.
(ctf_target) <shortname, longname, doc>: Delete.
<info>: New.
(ctf_target::open): Rename to ...
(ctf_target_open): ... this.
(_initialize_ctf): Adjust.
* exec.c (exec_target_info): New.
(exec_target) <shortname, longname, doc>: Delete.
<info>: New.
(exec_target::open): Rename to ...
(exec_target_open): ... this.
* gdbcore.h (core_target_open): Declare.
* go32-nat.c (_initialize_go32_nat): Use add_inf_child_target.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Use
add_inf_child_target.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Use
add_inf_child_target.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Use
add_inf_child_target.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Use
add_inf_child_target.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Use
add_inf_child_target.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Use
add_inf_child_target.
* i386-linux-nat.c (_initialize_i386_linux_nat): Use
add_inf_child_target.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Use
add_inf_child_target.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Use
add_inf_child_target.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Use
add_inf_child_target.
* inf-child.c (inf_child_target_info): New.
(inf_child_target::info): New.
(inf_child_open_target): Remove 'target' parameter. Use
get_native_target instead.
(inf_child_target::open): Delete.
(add_inf_child_target): New.
* inf-child.h (inf_child_target) <shortname, longname, doc, open>:
Delete.
<info>: New.
(add_inf_child_target): Declare.
(inf_child_open_target): Declare.
* linux-thread-db.c (thread_db_target_info): New.
(thread_db_target) <shortname, longname, doc>: Delete.
<info>: New.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Use
add_inf_child_target.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Use
add_inf_child_target.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Use
add_inf_child_target.
* m88k-bsd-nat.c (_initialize_m88kbsd_nat): Use
add_inf_child_target.
* make-target-delegates (print_class): Adjust.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Use
add_inf_child_target.
* mips-linux-nat.c (_initialize_mips_linux_nat): Use
add_inf_child_target.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Use
add_inf_child_target.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Use
add_inf_child_target.
* nto-procfs.c (nto_native_target_info): New.
(nto_procfs_target_native) <shortname, longname, doc>:
Delete.
<info>: New.
(nto_procfs_target_info): New.
(nto_procfs_target_procfs) <shortname, longname, doc>:
Delete.
<info>: New.
(init_procfs_targets): Adjust.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Use
add_inf_child_target.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Use
add_inf_child_target.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Use
add_inf_child_target.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Use
add_inf_child_target.
* ravenscar-thread.c (ravenscar_target_info): New.
(ravenscar_thread_target) <shortname, longname, doc>:
Delete.
<info>: New.
* record-btrace.c (record_btrace_target_info):
(record_btrace_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_btrace_target::open): Rename to ...
(record_btrace_target_open): ... this. Adjust.
* record-full.c (record_longname, record_doc): New.
(record_full_base_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_full_target_info): New.
(record_full_target): <shortname>: Delete.
<info>: New.
(record_full_core_open_1, record_full_open_1): Update comments.
(record_full_base_target::open): Rename to ...
(record_full_open): ... this.
(cmd_record_full_restore): Update.
(_initialize_record_full): Update.
* remote-sim.c (remote_sim_target_info): New.
(gdbsim_target) <shortname, longname, doc>: Delete.
<info>: New.
(gdbsim_target::open): Rename to ...
(gdbsim_target_open): ... this.
(_initialize_remote_sim): Adjust.
* remote.c (remote_doc): New.
(remote_target_info): New.
(remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(extended_remote_target_info): New.
(extended_remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(remote_target::open_1): Make static. Adjust.
* rs6000-nat.c (_initialize_rs6000_nat): Use add_inf_child_target.
* s390-linux-nat.c (_initialize_s390_nat): Use
add_inf_child_target.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Use
add_inf_child_target.
* sol-thread.c (thread_db_target_info): New.
(sol_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Use
add_inf_child_target.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Use
add_inf_child_target.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Use
add_inf_child_target.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use
add_inf_child_target.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Use
add_inf_child_target.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Use
add_inf_child_target.
* spu-linux-nat.c (_initialize_spu_nat): Use
add_inf_child_target.
* spu-multiarch.c (spu_multiarch_target_info): New.
(spu_multiarch_target) <shortname, longname, doc>: Delete.
<info>: New.
* target-delegates.c: Regenerate.
* target.c: Include <unordered_map>.
(target_ops_p): Delete.
(DEF_VEC_P(target_ops_p)): Delete.
(target_factories): New.
(test_target_info): New.
(test_target_ops::info): New.
(open_target): Adjust to use target_factories.
(add_target_with_completer): Rename to ...
(add_target): ... this. Change prototype. Register target_info
and open callback in target_factories. Register target_info in
command context instead of target_ops.
(add_target): Delete old implementation.
(add_deprecated_target_alias): Change prototype. Adjust.
(the_native_target): New.
(set_native_target, get_native_target): New.
(find_default_run_target): Use the_native_target.
(find_attach_target, find_run_target): Simplify.
(target_ops::open): Delete.
(dummy_target_info): New.
(dummy_target::shortname, dummy_target::longname)
(dummy_target::doc): Delete.
(dummy_target::info): New.
(debug_target::shortname, debug_target::longname)
(debug_target::doc): Delete.
(debug_target::info): New.
* target.h (struct target_info): New.
(target_ops::~target_ops): Add comment.
(target_ops::info): New.
(target_ops::shortname, target_ops::longname, target_ops::doc): No
longer virtual. Implement in terms of target_info.
(set_native_target, get_native_target): Declare.
(target_open_ftype): New.
(add_target, add_target_with_completer)
(add_deprecated_target_alias): Change prototype.
(test_target) <shortname, longname, doc>: Delete.
<info>: New.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Use
add_inf_child_target.
* tracefile-tfile.c (tfile_target_info): New.
(tfile_target) <shortname, longname, doc>: Delete.
<info>: New.
(tfile_target::open): Rename to ...
(tfile_target_open): ... this.
(_initialize_tracefile_tfile): Adjust.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Use
add_inf_child_target.
* windows-nat.c (_initialize_windows_nat): Use
add_inf_child_target.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Use
add_inf_child_target.
|
|
After the previous target_ops/C++ patches are all squashed and merged,
this one can go in separately.
This patch adjusts all the target methods to return bool instead of int
when they're returning a boolean.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* target.h (target_ops)
<stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint,
stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint,
stopped_by_watchpoint, have_continuable_watchpoint,
stopped_data_address, watchpoint_addr_within_range,
can_accel_watchpoint_condition, can_run, thread_alive,
has_all_memory, has_memory, has_stack, has_registers,
has_execution, can_async_p, is_async_p, supports_non_stop,
always_non_stop_p, can_execute_reverse, supports_multi_process,
supports_enable_disable_tracepoint,
supports_disable_randomization, supports_string_tracing,
supports_evaluation_of_breakpoint_conditions,
can_run_breakpoint_commands, filesystem_is_local,
can_download_tracepoint, get_trace_state_variable_value,
set_trace_notes, get_tib_address, use_agent, can_use_agent,
record_is_replaying, record_will_replay,
augmented_libraries_svr4_read>: Adjust to return bool.
* aarch64-linux-nat.c: All implementations adjusted.
* aix-thread.c: All implementations adjusted.
* arm-linux-nat.c: All implementations adjusted.
* breakpoint.c: All implementations adjusted.
* bsd-kvm.c: All implementations adjusted.
* bsd-uthread.c: All implementations adjusted.
* corelow.c: All implementations adjusted.
* ctf.c: All implementations adjusted.
* darwin-nat.c: All implementations adjusted.
* darwin-nat.h: All implementations adjusted.
* exec.c: All implementations adjusted.
* fbsd-nat.c: All implementations adjusted.
* fbsd-nat.h: All implementations adjusted.
* gnu-nat.c: All implementations adjusted.
* gnu-nat.h: All implementations adjusted.
* go32-nat.c: All implementations adjusted.
* ia64-linux-nat.c: All implementations adjusted.
* inf-child.c: All implementations adjusted.
* inf-child.h: All implementations adjusted.
* inf-ptrace.c: All implementations adjusted.
* inf-ptrace.h: All implementations adjusted.
* linux-nat.c: All implementations adjusted.
* linux-nat.h: All implementations adjusted.
* mips-linux-nat.c: All implementations adjusted.
* nto-procfs.c: All implementations adjusted.
* ppc-linux-nat.c: All implementations adjusted.
* procfs.c: All implementations adjusted.
* ravenscar-thread.c: All implementations adjusted.
* record-btrace.c: All implementations adjusted.
* record-full.c: All implementations adjusted.
* remote-sim.c: All implementations adjusted.
* remote.c: All implementations adjusted.
* s390-linux-nat.c: All implementations adjusted.
* sol-thread.c: All implementations adjusted.
* spu-multiarch.c: All implementations adjusted.
* target-delegates.c: All implementations adjusted.
* target.c: All implementations adjusted.
* target.h: All implementations adjusted.
* tracefile-tfile.c: All implementations adjusted.
* tracefile.c: All implementations adjusted.
* tracefile.h: All implementations adjusted.
* windows-nat.c: All implementations adjusted.
* x86-linux-nat.h: All implementations adjusted.
* x86-nat.h: All implementations adjusted.
|
|
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
|
This changes a few more places to use scoped_fd. This allows the
removal of some cleanups.
Regression tested by the buildbot, though note that I'm not sure
whether the buildbot actually builds anything using all of these
files.
gdb/ChangeLog
2018-03-08 Tom Tromey <tom@tromey.com>
* source.c (get_filename_and_charpos): Use scoped_fd.
* nto-procfs.c (procfs_open_1): Use scoped_fd.
(procfs_pidlist): Likewise.
* procfs.c (proc_get_LDT_entry): Use scoped_fd.
(iterate_over_mappings): Likewise.
|
|
In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
|
|
The to_detach target_ops method implementations are currently expected
to work on current_inferior/inferior_ptid. In order to make things more
explicit, and remove some "shadow" parameter passing through globals,
this patch adds an "inferior" parameter to to_detach. Implementations
will be expected to use this instead of relying on the global. However,
to keep things simple, this patch only does the minimum that is
necessary to add the parameter. The following patch gives an example of
how one such implementation would be adapted. If the approach is deemed
good, we can then look into adapting more implementations. Until then,
they'll continue to work as they do currently.
gdb/ChangeLog:
* target.h (struct target_ops) <to_detach>: Add inferior
parameter.
(target_detach): Likewise.
* target.c (dispose_inferior): Pass inferior down.
(target_detach): Pass inferior down. Assert that it is equal to
the current inferior.
* aix-thread.c (aix_thread_detach): Pass inferior down.
* corefile.c (core_file_command): Pass current_inferior() down.
* corelow.c (core_detach): Add inferior parameter.
* darwin-nat.c (darwin_detach): Likewise.
* gnu-nat.c (gnu_detach): Likewise.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* infcmd.c (detach_command): Pass current_inferior() down to
target_detach.
* infrun.c (follow_fork_inferior): Pass parent_inf to
target_detach.
(handle_vfork_child_exec_or_exit): Pass inf->vfork_parent to
target_detach.
* linux-nat.c (linux_nat_detach): Add inferior parameter.
* linux-thread-db.c (thread_db_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* procfs.c (procfs_detach): Likewise.
* record.c (record_detach): Likewise.
* record.h (struct inferior): Forward-declare.
(record_detach): Add inferior parameter.
* remote-sim.c (gdbsim_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_detach): Likewise.
(extended_remote_detach): Likewise.
* sol-thread.c (sol_thread_detach): Likewise.
* target-debug.h (target_debug_print_inferior_p): New macro.
* target-delegates.c: Re-generate.
* top.c (kill_or_detach): Pass inferior down to target_detach.
* windows-nat.c (windows_detach): Add inferior parameter.
|
|
I was looking into adding a parameter to target_detach, and was
wondering what the args parameter was. It seems like in the distant
past, it was possible to specify a signal number when detaching. That
signal was injected in the process before it was detached. There is an
example of code handling this in linux_nat_detach. With today's GDB, I
can't get this to work. Doing "detach 15" (15 == SIGTERM) doesn't work,
because detach is a prefix command and doesn't recognize the sub-command
15. Doing "detach inferiors 15" doesn't work because it expects a list
of inferior id to detach. Therefore, I don't think there's a way of
invoking detach_command with a non-NULL args. I also didn't find any
documentation related to this feature.
I assume that this feature stopped working when detach was made a prefix
command, which is in f73adfeb8bae36885e6ea248d12223ab0d5eb9cb (sorry,
there's no commit title) from 2006. Given that this feature was broken
for such a long time and we haven't heard anything (AFAIK, I did not
find any related bug), I think it's safe to remove it, as well as the
args parameter to target_detach. If someone wants to re-introduce it, I
would suggest rethinking the user interface, and in particular would
suggest using signal name instead of numbers.
I tried to fix all the impacted code, but I might have forgotten some
spots. It shouldn't be hard to fix if that's the case. I also couldn't
build-test everything I changed, especially the nto and solaris stuff.
gdb/ChangeLog:
* target.h (struct target_ops) <to_detach>: Remove args
parameter.
(target_detach): Likewise.
* target.c (dispose_inferior): Adjust.
(target_detach): Remove args parameter, adjust.
* aix-thread.c (aix_thread_detach): Adjust.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_detach): Adjust.
* darwin-nat.c (darwin_detach): Adjust.
* gnu-nat.c (gnu_detach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
* infcmd.c (detach_command): Adjust
* infrun.c (follow_fork_inferior): Adjust.
(handle_vfork_child_exec_or_exit): Adjust.
* linux-fork.c (linux_fork_detach): Remove args parameter.
* linux-fork.h (linux_fork_detach): Likewise.
* linux-nat.c (linux_nat_detach): Likewise, and adjust.
* linux-thread-db.c (thread_db_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* procfs.c (procfs_detach): Likewise.
(do_detach): Remove signo parameter.
* record.c (record_detach): Remove args parameter.
* record.h (record_detach): Likewise.
* remote-sim.c (gdbsim_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_detach): Likewise.
(extended_remote_detach): Likewise.
* sol-thread.c (sol_thread_detach): Likewise.
* target-delegates.c: Re-generate.
* top.c (struct qt_args) <args>: Remove field.
(kill_or_detach): Don't pass args.
(quit_force): Don't set args.
* windows-nat.c (windows_detach): Remove args parameter.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
There are multiple definitions of the private_thread_info structure
compiled in the same GDB build. Because of the one definition rule, we
need to change this if we want to be able to make them non-POD (e.g. use
std::vector fields). This patch creates a class hierarchy, with
private_thread_info being an abstract base class, and all the specific
implementations inheriting from it.
In order to poison XNEW/xfree for non-POD types, it is also needed to
get rid of the xfree in thread_info::~thread_info, which operates on an
opaque type. This is replaced by thread_info::priv now being a
unique_ptr, which calls the destructor of the private_thread_info
subclass when the thread is being destroyed.
Including gdbthread.h from darwin-nat.h gave these errors:
/Users/simark/src/binutils-gdb/gdb/gdbthread.h:609:3: error: must use 'class' tag to refer to type 'thread_info' in this scope
thread_info *m_thread;
^
class
/usr/include/mach/thread_act.h:240:15: note: class 'thread_info' is hidden by a non-type declaration of 'thread_info' here
kern_return_t thread_info
^
It turns out that there is a thread_info function in the Darwin/XNU/mach API:
http://web.mit.edu/darwin/src/modules/xnu/osfmk/man/thread_info.html
Therefore, I had to add the class keyword at a couple of places in gdbthread.h,
I don't really see a way around it.
gdb/ChangeLog:
* gdbthread.h (private_thread_info): Define structure type, add
virtual pure destructor.
(thread_info) <priv>: Change type to unique_ptr.
<private_dtor>: Remove.
* thread.c (add_thread_with_info): Adjust to use of unique_ptr.
(private_thread_info::~private_thread_info): Provide default
implementation.
(thread_info::~thread_info): Don't call private_dtor nor
manually free priv.
* aix-thread.c (private_thread_info): Rename to ...
(aix_thread_info): ... this.
(get_aix_thread_info): New.
(sync_threadlists): Adjust.
(iter_tid): Adjust.
(aix_thread_resume): Adjust.
(aix_thread_fetch_registers): Adjust.
(aix_thread_store_registers): Adjust.
(aix_thread_extra_thread_info): Adjust.
* darwin-nat.h (private_thread_info): Rename to ...
(darwin_thread_info): ... this.
(get_darwin_thread_info): New.
* darwin-nat.c (darwin_init_thread_list): Adjust.
(darwin_check_new_threads): Adjust.
(thread_info_from_private_thread_info): Adjust.
* linux-thread-db.c (private_thread_info): Rename to ...
(thread_db_thread_info): ... this, initialize fields.
(get_thread_db_thread_info): New.
<dying>: Change type to bool.
(update_thread_state): Adjust to type rename.
(record_thread): Adjust to type rename an use of unique_ptr.
(thread_db_pid_to_str): Likewise.
(thread_db_extra_thread_info): Likewise.
(thread_db_thread_handle_to_thread_info): Likewise.
(thread_db_get_thread_local_address): Likewise.
* nto-tdep.h (private_thread_info): Rename to ...
(nto_thread_info): ... this, initialize fields.
(get_nto_thread_info): New.
<name>: Change type to std::string.
* nto-tdep.c (nto_extra_thread_info): Adjust to type rename and
use of unique_ptr.
* nto-procfs.c (update_thread_private_data_name): Adjust to
std::string change, allocate nto_private_thread_info with new.
(update_thread_private_data): Adjust to unique_ptr.
* remote.c (private_thread_info): Rename to ...
(remote_thread_info): ... this, initialize data members with
default values.
<extra, name>: Change type to std::string.
<thread_handle>: Change type to non-pointer.
(free_private_thread_info): Remove.
(get_private_info_thread): Rename to...
(get_remote_thread_info): ... this, change return type, adjust to
use of unique_ptr, use remote_thread_info constructor.
(remote_add_thread): Adjust.
(get_private_info_ptid): Rename to...
(get_remote_thread_info): ...this, change return type.
(remote_thread_name): Use get_remote_thread_info, adjust to
change to std::string.
(struct thread_item) <~thread_item>: Remove.
<thread_handle>: Make non pointer.
(start_thread): Adjust to thread_item::thread_handle type
change.
(remote_update_thread_list): Adjust to type name change, move
strings from temporary to long-lived object instead of
duplicating.
(remote_threads_extra_info): Use get_remote_thread_info.
(process_initial_stop_replies): Likewise.
(resume_clear_thread_private_info): Likewise.
(remote_resume): Adjust to type name change.
(remote_commit_resume): Use get_remote_thread_info.
(process_stop_reply): Adjust to type name change.
(remote_stopped_by_sw_breakpoint): Use get_remote_thread_info.
(remote_stopped_by_hw_breakpoint): Likewise.
(remote_stopped_by_watchpoint): Likewise.
(remote_stopped_data_address): Likewise.
(remote_core_of_thread): Likewise.
(remote_thread_handle_to_thread_info): Use
get_private_info_thread, adjust to thread_handle field type
change.
|
|
This patch constifies add_info and updates all the info commands. The
bulk of this patch was written using a script; and then I did a manual
pass to fix up the remaining compilation errors.
I could not compile every changed file; in particular nto-procfs.c,
gnu-nat.c, and darwin-nat-info.c; but I at least tried to check the
correctness by inspection.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* frame.h (info_locals_command, info_args_command): Constify.
* auto-load.h (auto_load_info_scripts): Constify.
* inferior.h (registers_info): Constify.
* copying.c: Rebuild.
* copying.awk: Constify generated commands.
* auto-load.c (auto_load_info_scripts)
(info_auto_load_gdb_scripts): Constify.
* cli/cli-decode.c (struct cmd_list_element): Take a
cmd_const_cfunc_ftype.
* command.h (add_info): Take a cmd_const_cfunc_ftype.
* tui/tui-win.c (tui_all_windows_info): Constify.
* python/py-auto-load.c (info_auto_load_python_scripts):
Constify.
* cli/cli-cmds.c (show_command): Remove non-const overload.
* tracepoint.c (info_tvariables_command, info_scope_command):
Constify.
(info_static_tracepoint_markers_command): Constify.
* thread.c (info_threads_command): Constify.
(print_thread_info_1): Constify.
* target.c (info_target_command): Constify.
* symtab.c (info_sources_command, info_functions_command)
(info_types_command): Constify.
(info_variables_command): Remove non-const overload.
* symfile.c (info_ext_lang_command): Constify.
* stack.c (info_frame_command, info_locals_command)
(info_args_command): Constify.
(backtrace_command): Remove non-const overload.
* source.c (info_source_command, info_line_command): Constify.
* solib.c (info_sharedlibrary_command): Constify.
* skip.c (info_skip_command): Constify.
* ser-go32.c (info_serial_command): Constify.
* reverse.c (info_bookmarks_command): Constify.
* printcmd.c (info_symbol_command, info_address_command)
(info_display_command): Constify.
* osdata.c (info_osdata_command): Constify.
* objc-lang.c (info_selectors_command, info_classes_command):
Constify.
* nto-procfs.c (procfs_pidlist, procfs_meminfo): Constify.
* memattr.c (info_mem_command): Constify.
* macrocmd.c (info_macro_command, info_macros_command): Constify.
* linux-fork.c (info_checkpoints_command): Constify.
* infrun.c (info_signals_command): Constify.
* inflow.c (info_terminal_command): Constify.
* inferior.c (info_inferiors_command): Constify.
(print_inferior): Constify.
* infcmd.c (info_program_command, info_all_registers_command)
(info_registers_command, info_vector_command)
(info_float_command): Constify.
(registers_info): Constify.
* gnu-nat.c (info_send_rights_cmd, info_recv_rights_cmd)
(info_port_sets_cmd, info_dead_names_cmd, info_port_rights_cmd):
Constify.
* f-valprint.c (info_common_command): Constify.
* dcache.c (info_dcache_command): Constify.
(dcache_info_1): Constify.
* darwin-nat-info.c (info_mach_tasks_command)
(info_mach_task_command, info_mach_ports_command)
(info_mach_port_command, info_mach_threads_command)
(info_mach_thread_command, info_mach_regions_command)
(info_mach_regions_recurse_command, info_mach_region_command)
(info_mach_exceptions_command): Constify.
(get_task_from_args): Constify.
* cp-support.c (info_vtbl_command): Constify.
* breakpoint.c (info_watchpoints_command)
(info_tracepoints_command): Constify.
(info_breakpoints_command): Remove non-const overload.
* avr-tdep.c (avr_io_reg_read_command): Constify.
* auxv.c (info_auxv_command): Constify.
* ada-tasks.c (info_tasks_command): Constify.
(info_task): Constify.
* ada-lang.c (info_exceptions_command): Constify.
|
|
This patches removes get_regcache_arch, and use regache->arch () instead.
The motivation of this change is that I am going to move some basic stuff
into a base class of regcache. I don't need to update "client" code
regcache->arch (). On the other hand, this patch shortens the code a
little bit.
gdb:
2017-10-25 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_supply): Use
regcache->arch () instead get_regcache_arch.
* aarch64-fbsd-nat.c (aarch64_fbsd_fetch_inferior_registers):
Likewise.
(aarch64_fbsd_store_inferior_registers): Likewise.
* aarch64-linux-nat.c (fetch_gregs_from_thread): Likewise.
(store_gregs_to_thread): Likewise.
(fetch_fpregs_from_thread): Likewise.
(store_fpregs_to_thread): Likewise.
* aarch64-tdep.c (aarch64_extract_return_value): Likewise.
(aarch64_store_return_value): Likewise.
(aarch64_software_single_step): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
(supply_reg32): Likewise.
(supply_sprs64): Likewise.
(supply_sprs32): Likewise.
(fill_gprs64): Likewise.
(fill_gprs32): Likewise.
(fill_sprs64): Likewise.
(fill_sprs32): Likewise.
(store_regs_user_thread): Likewise.
(store_regs_kernel_thread): Likewise.
* alpha-bsd-nat.c (alphabsd_fetch_inferior_registers): Likewise.
(alphabsd_store_inferior_registers): Likewise.
* alpha-tdep.c (alpha_extract_return_value): Likewise.
(alpha_store_return_value): Likewise.
(alpha_deal_with_atomic_sequence): Likewise.
(alpha_next_pc): Likewise.
(alpha_software_single_step): Likewise.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise.
(amd64bsd_store_inferior_registers): Likewise.
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
Likewise.
(amd64_linux_store_inferior_registers): Likewise.
* amd64-nat.c (amd64_supply_native_gregset): Likewise.
(amd64_collect_native_gregset): Likewise.
* amd64-obsd-tdep.c (amd64obsd_supply_uthread): Likewise.
(amd64obsd_collect_uthread): Likewise.
* amd64-tdep.c (amd64_supply_fpregset): Likewise.
(amd64_collect_fpregset): Likewise.
(amd64_supply_fxsave): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_fxsave): Likewise.
(amd64_collect_xsave): Likewise.
* arc-tdep.c (arc_write_pc): Likewise.
* arch-utils.c (default_skip_permanent_breakpoint): Likewise.
* arm-fbsd-nat.c (arm_fbsd_fetch_inferior_registers): Likewise.
(arm_fbsd_store_inferior_registers): Likewise.
* arm-linux-nat.c (fetch_vfp_regs): Likewise.
(store_vfp_regs): Likewise.
(arm_linux_fetch_inferior_registers): Likewise.
(arm_linux_store_inferior_registers): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
(arm_linux_sigreturn_next_pc): Likewise.
(arm_linux_get_next_pcs_syscall_next_pc): Likewise.
* arm-nbsd-nat.c (arm_supply_gregset): Likewise.
(fetch_register): Likewise.
(store_register): Likewise.
* arm-tdep.c (arm_is_thumb): Likewise.
(displaced_in_arm_mode): Likewise.
(bx_write_pc): Likewise.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_software_single_step): Likewise.
(arm_extract_return_value): Likewise.
(arm_store_return_value): Likewise.
(arm_write_pc): Likewise.
* bfin-tdep.c (bfin_extract_return_value): Likewise.
* bsd-uthread.c (bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* core-regset.c (fetch_core_registers): Likewise.
* corelow.c (get_core_registers): Likewise.
* cris-tdep.c (cris_store_return_value): Likewise.
(cris_extract_return_value): Likewise.
(find_step_target): Likewise.
(find_step_target): Likewise.
(cris_software_single_step): Likewise.
* ctf.c (ctf_fetch_registers): Likewise.
* darwin-nat.c (cancel_breakpoint): Likewise.
* fbsd-tdep.c (fbsd_collect_thread_registers): Likewise.
* frv-tdep.c (frv_extract_return_value): Likewise.
* ft32-tdep.c (ft32_store_return_value): Likewise.
(ft32_extract_return_value): Likewise.
* go32-nat.c (fetch_register): Likewise.
(go32_fetch_registers): Likewise.
(go32_store_registers): Likewise.
(store_register): Likewise.
* h8300-tdep.c (h8300_extract_return_value): Likewise.
(h8300_store_return_value): Likewise.
* hppa-linux-nat.c (fetch_register): Likewise.
(store_register): Likewise.
(hppa_linux_fetch_inferior_registers): Likewise.
(hppa_linux_store_inferior_registers): Likewise.
* i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Likewise.
(i386_darwin_store_inferior_registers): Likewise.
* i386-gnu-nat.c (gnu_fetch_registers): Likewise.
(gnu_store_registers): Likewise.
* i386-linux-nat.c (fetch_register): Likewise.
(store_register): Likewise.
(supply_gregset): Likewise.
(fill_gregset): Likewise.
(i386_linux_fetch_inferior_registers): Likewise.
(i386_linux_store_inferior_registers): Likewise.
(i386_linux_resume): Likewise.
* i386-linux-tdep.c (i386_linux_get_syscall_number_from_regcache):
Likewise.
* i386-nto-tdep.c (i386nto_supply_gregset): Likewise.
* i386-obsd-nat.c (i386obsd_supply_pcb): Likewise.
* i386-obsd-tdep.c (i386obsd_supply_uthread): Likewise.
(i386obsd_collect_uthread): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_supply_fpregset): Likewise.
(i386_collect_fpregset): Likewise.
(i386_mpx_bd_base): Likewise.
* i386-v4-nat.c (supply_fpregset): Likewise.
(fill_fpregset): Likewise.
* i387-tdep.c (i387_supply_fsave): Likewise.
(i387_collect_fsave): Likewise.
(i387_supply_fxsave): Likewise.
(i387_collect_fxsave): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* ia64-linux-nat.c (ia64_linux_fetch_registers): Likewise.
(ia64_linux_store_registers): Likewise.
* ia64-tdep.c (ia64_access_rse_reg): Likewise.
(ia64_extract_return_value): Likewise.
(ia64_store_return_value): Likewise.
(find_func_descr): Likewise.
* inf-child.c (inf_child_fetch_inferior_registers): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_registers): Likewise.
(inf_ptrace_store_registers): Likewise.
* infrun.c (use_displaced_stepping): Likewise.
(displaced_step_prepare_throw): Likewise.
(resume): Likewise.
(proceed): Likewise.
(do_target_wait): Likewise.
(adjust_pc_after_break): Likewise.
(handle_inferior_event_1): Likewise.
(handle_signal_stop): Likewise.
(save_infcall_suspend_state): Likewise.
(restore_infcall_suspend_state): Likewise.
* iq2000-tdep.c (iq2000_extract_return_value): Likewise.
* jit.c (jit_frame_prev_register): Likewise.
* linux-nat.c (save_stop_reason): Likewise.
(linux_nat_wait_1): Likewise.
(resume_stopped_resumed_lwps): Likewise.
* linux-record.c (record_linux_sockaddr): Likewise.
(record_linux_msghdr): Likewise.
(record_linux_system_call): Likewise.
* linux-tdep.c (linux_collect_thread_registers): Likewise.
* lm32-tdep.c (lm32_extract_return_value): Likewise.
(lm32_store_return_value): Likewise.
* m32c-tdep.c (m32c_read_flg): Likewise.
(m32c_pseudo_register_read): Likewise.
(m32c_pseudo_register_write): Likewise.
* m32r-linux-tdep.c (m32r_linux_supply_gregset): Likewise.
(m32r_linux_collect_gregset): Likewise.
* m32r-tdep.c (m32r_store_return_value): Likewise.
(m32r_extract_return_value): Likewise.
* m68k-bsd-nat.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_collect_fpregset): Likewise.
* m68k-bsd-tdep.c (m68kbsd_supply_fpregset): Likewise.
* m68k-linux-nat.c (fetch_register): Likewise.
(old_fetch_inferior_registers): Likewise.
(old_store_inferior_registers): Likewise.
(store_regs): Likewise.
* m68k-tdep.c (m68k_svr4_extract_return_value): Likewise.
(m68k_svr4_store_return_value): Likewise.
* m88k-tdep.c (m88k_store_arguments): Likewise.
* mi/mi-main.c (mi_cmd_data_list_changed_registers): Likewise.
(mi_cmd_data_write_register_values): Likewise.
* mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers): Likewise.
(mips_fbsd_store_inferior_registers): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Likewise.
(mips_fbsd_supply_gregs): Likewise.
(mips_fbsd_collect_fpregs): Likewise.
(mips_fbsd_collect_gregs): Likewise.
(mips_fbsd_supply_fpregset): Likewise.
(mips_fbsd_collect_fpregset): Likewise.
(mips_fbsd_supply_gregset): Likewise.
(mips_fbsd_collect_gregset): Likewise.
* mips-linux-nat.c (supply_gregset): Likewise.
(fill_gregset): Likewise.
(supply_fpregset): Likewise.
(fill_fpregset): Likewise.
* mips-linux-tdep.c (mips_supply_gregset): Likewise.
(mips_fill_gregset): Likewise.
(mips_supply_fpregset): Likewise.
(mips_fill_fpregset): Likewise.
(mips64_supply_gregset): Likewise.
(micromips_linux_sigframe_validate): Likewise.
* mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise.
(mipsnbsd_fetch_inferior_registers): Likewise.
(mipsnbsd_store_inferior_registers): Likewise.
* mips-nbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise.
(mipsnbsd_supply_gregset): Likewise.
(mipsnbsd_iterate_over_regset_sections): Likewise.
(mipsnbsd_supply_reg): Likewise.
(mipsnbsd_supply_fpreg): Likewise.
* mips-tdep.c (mips_in_frame_stub): Likewise.
(mips_dummy_id): Likewise.
(is_octeon_bbit_op): Likewise.
(micromips_bc1_pc): Likewise.
(extended_mips16_next_pc): Likewise.
(mips16_next_pc): Likewise.
(deal_with_atomic_sequence): Likewise.
* moxie-tdep.c (moxie_process_readu): Likewise.
* nios2-tdep.c (nios2_get_next_pc): Likewise.
* nto-procfs.c (procfs_store_registers): Likewise.
* ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers): Likewise.
(ppcfbsd_store_inferior_registers): Likewise.
* ppc-linux-nat.c (fetch_vsx_register): Likewise.
(fetch_altivec_register): Likewise.
(get_spe_registers): Likewise.
(fetch_spe_register): Likewise.
(fetch_altivec_registers): Likewise.
(fetch_all_gp_regs): Likewise.
(fetch_all_fp_regs): Likewise.
(store_vsx_register): Likewise.
(store_altivec_register): Likewise.
(set_spe_registers): Likewise.
(store_spe_register): Likewise.
(store_altivec_registers): Likewise.
(store_all_gp_regs): Likewise.
(store_all_fp_regs): Likewise.
* ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise.
(ppc_linux_collect_gregset): Likewise.
(ppc_canonicalize_syscall): Likewise.
(ppc_linux_record_signal): Likewise.
(ppu2spu_prev_register): Likewise.
* ppc-nbsd-nat.c (ppcnbsd_supply_pcb): Likewise.
* ppc-obsd-nat.c (ppcobsd_fetch_registers): Likewise.
(ppcobsd_store_registers): Likewise.
* ppc-ravenscar-thread.c (ppc_ravenscar_generic_fetch_registers):
Likewise.
(ppc_ravenscar_generic_store_registers): Likewise.
* procfs.c (procfs_fetch_registers): Likewise.
(procfs_store_registers): Likewise.
* ravenscar-thread.c (ravenscar_fetch_registers): Likewise.
(ravenscar_store_registers): Likewise.
(ravenscar_prepare_to_store): Likewise.
* record-btrace.c (record_btrace_fetch_registers): Likewise.
* record-full.c (record_full_wait_1): Likewise.
(record_full_registers_change): Likewise.
(record_full_store_registers): Likewise.
(record_full_core_fetch_registers): Likewise.
(record_full_save): Likewise.
(record_full_goto_insn): Likewise.
* regcache.c (regcache_register_size): Likewise.
(get_regcache_arch): Remove.
(regcache_read_pc): Likewise.
* regcache.h (get_regcache_arch): Remove.
* remote-sim.c (gdbsim_fetch_register): Likewise.
(gdbsim_store_register): Likewise.
* remote.c (fetch_register_using_p): Likewise.
(send_g_packet): Likewise.
(remote_prepare_to_store): Likewise.
(store_registers_using_G): Likewise.
* reverse.c (save_bookmark_command): Likewise.
(goto_bookmark_command): Likewise.
* rs6000-aix-tdep.c (branch_dest): Likewise.
* rs6000-nat.c (rs6000_ptrace64): Likewise.
(fetch_register): Likewise.
* rs6000-tdep.c (ppc_supply_reg): Likewise.
(ppc_collect_reg): Likewise.
(ppc_collect_gregset): Likewise.
(ppc_collect_fpregset): Likewise.
(ppc_collect_vsxregset): Likewise.
(ppc_collect_vrregset): Likewise.
(ppc_displaced_step_hw_singlestep): Likewise.
(rs6000_pseudo_register_read): Likewise.
(rs6000_pseudo_register_write): Likewise.
* s390-linux-nat.c (supply_gregset): Likewise.
(fill_gregset): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.
* s390-linux-tdep.c (s390_write_pc): Likewise.
(s390_software_single_step): Likewise.
(s390_all_but_pc_registers_record): Likewise.
(s390_linux_syscall_record): Likewise.
* sentinel-frame.c (sentinel_frame_prev_arch): Likewise.
* sh-nbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise.
(shnbsd_store_inferior_registers): Likewise.
* sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
(sh_extract_return_value_fpu): Likewise.
(sh_store_return_value_nofpu): Likewise.
(sh_corefile_supply_regset): Likewise.
(sh_corefile_collect_regset): Likewise.
* sh64-tdep.c (sh64_extract_return_value): Likewise.
(sh64_store_return_value): Likewise.
* sparc-linux-tdep.c (sparc32_linux_collect_core_fpregset): Likewise.
* sparc-nat.c (sparc_fetch_inferior_registers): Likewise.
(sparc_store_inferior_registers): Likewise.
* sparc-ravenscar-thread.c (register_in_thread_descriptor_p): Likewise.
(sparc_ravenscar_prepare_to_store): Likewise.
* sparc-tdep.c (sparc32_store_arguments): Likewise.
(sparc_analyze_control_transfer): Likewise.
(sparc_step_trap): Likewise.
(sparc_software_single_step): Likewise.
(sparc32_gdbarch_init): Likewise.
(sparc_supply_rwindow): Likewise.
(sparc_collect_rwindow): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_collect_core_fpregset): Likewise.
* sparc64-nbsd-nat.c (sparc64nbsd_supply_gregset): Likewise.
(sparc64nbsd_collect_gregset): Likewise.
(sparc64nbsd_supply_fpregset): Likewise.
(sparc64nbsd_collect_fpregset): Likewise.
* sparc64-tdep.c (sparc64_store_arguments): Likewise.
(sparc64_supply_gregset): Likewise.
(sparc64_collect_gregset): Likewise.
(sparc64_supply_fpregset): Likewise.
(sparc64_collect_fpregset): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-tdep.c (spu_unwind_sp): Likewise.
(spu2ppu_prev_register): Likewise.
(spu_memory_remove_breakpoint): Likewise.
* stack.c (return_command): Likewise.
* tic6x-tdep.c (tic6x_extract_signed_field): Likewise.
* tracefile-tfile.c (tfile_fetch_registers): Likewise.
* tracefile.c (trace_save_ctf): Likewise.
* windows-nat.c (do_windows_fetch_inferior_registers): Likewise.
(do_windows_store_inferior_registers): Likewise.
(windows_resume): Likewise.
* xtensa-linux-nat.c (fill_gregset): Likewise.
(supply_gregset_reg): Likewise.
* xtensa-tdep.c (xtensa_register_write_masked): Likewise.
(xtensa_register_read_masked): Likewise.
(xtensa_supply_gregset): Likewise.
(xtensa_extract_return_value): Likewise.
(xtensa_store_return_value): Likewise.
|
|
This removes make_cleanup_restore_target_terminal and generally
C++-ifies target terminal handling. It changes all target_terminal_*
functions to be static members of a new target_terminal class and
changes the cleanup to be a scoped_* class.
make_cleanup_override_quit_handler is also removed in favor of simply
using scoped_restore.
Note that there are some files in this patch that I could not compile.
Considering that some of the rewrites were automated, and that none of
these files involed cleanups, I feel that this is relatively safe.
Regression tested by the buildbot.
gdb/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* windows-nat.c (get_windows_debug_event, windows_wait)
(do_initial_windows_stuff, windows_attach): Update.
* utils.c (vwarning, internal_vproblem): Update.
(ui_unregister_input_event_handler_cleanup)
(prepare_to_handle_input): Remove.
(class scoped_input_handler): New.
(defaulted_query, prompt_for_continue): Update.
* tui/tui-hooks.c (tui_refresh_frame_and_register_information):
Update.
* top.c (undo_terminal_modifications_before_exit): Update.
* target/target.h (target_terminal_init, target_terminal_inferior)
(target_terminal_ours): Don't declare.
(class target_terminal): New.
* target.h (target_terminal_is_inferior, target_terminal_is_ours)
(target_terminal_ours_for_output)
(make_cleanup_restore_target_terminal): Don't declare.
(target_terminal_info): Remove.
* target.c (enum terminal_state, terminal_state): Remove.
(target_terminal::terminal_state): Define.
(target_terminal::init): Rename from target_terminal_init.
(target_terminal::inferior): Rename from
target_terminal_inferior.
(target_terminal::ours): Rename from target_terminal_ours.
(target_terminal::ours_for_output): Rename from
target_terminal_ours_for_output.
(target_terminal::info): New method.
(cleanup_restore_target_terminal)
(make_cleanup_restore_target_terminal): Remove.
* solib.c (handle_solib_event): Update.
* remote.c (remote_serial_quit_handler): Update.
(remote_terminal_inferior, remote_wait_as): Update.
* record-full.c (record_full_wait_1): Update.
* nto-procfs.c (procfs_create_inferior): Update.
* nat/fork-inferior.c (startup_inferior): Update.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_record_changed, mi_inferior_added, mi_inferior_appeared)
(mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
(mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
(mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_on_resume, mi_solib_loaded)
(mi_solib_unloaded, mi_command_param_changed, mi_memory_changed)
(mi_user_selected_context_changed, report_initial_inferior):
Update.
* linux-nat.c (linux_nat_attach, linux_nat_terminal_ours)
(linux_nat_terminal_inferior): Update.
* infrun.c (follow_fork_inferior)
(handle_vfork_child_exec_or_exit, do_target_resume)
(check_curr_ui_sync_execution_done, handle_inferior_event_1)
(handle_signal_stop, maybe_remove_breakpoints, normal_stop):
Update.
* inflow.c (child_terminal_init, info_terminal_command): Update.
* infcmd.c (post_create_inferior, continue_1, prepare_one_step)
(attach_command): Update.
* infcall.c (call_thread_fsm_should_stop): Update.
* gnu-nat.c (gnu_attach): Update.
* extension.c (struct active_ext_lang_state)
(restore_active_ext_lang): Update.
* exceptions.c (print_flush): Update.
* event-top.c (async_enable_stdin, default_quit_handler): Update.
(struct quit_handler_cleanup_data, restore_quit_handler)
(restore_quit_handler_dtor, make_cleanup_override_quit_handler):
Remove.
* cp-support.c (gdb_demangle): Update.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, handle_jit_event)
(disable_breakpoints_in_unloaded_shlib): Update.
* annotate.c (annotate_breakpoints_invalid)
(annotate_frames_invalid): Update.
gdb/gdbserver/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* target.c (target_terminal::terminal_state): Define.
(target_terminal::init): Rename from target_terminal_init.
(target_terminal::inferior): Rename from
target_terminal_inferior.
(target_terminal::ours): Rename from target_terminal_ours.
(target_terminal::ours_for_output, target_terminal::info): New.
|
|
These prototypes were required when compiling GDB as C but are not
required for C++.
gdb/ChangeLog:
* aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat
prototype.
* aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep
prototype.
* aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep
prototype.
* aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype.
* ada-exp.y: Remove _initialize_ada_exp prototype.
* ada-lang.c: Remove _initialize_ada_language prototype.
* ada-tasks.c: Remove _initialize_tasks prototype.
* addrmap.c: Remove _initialize_addrmap prototype.
* agent.c: Remove _initialize_agent prototype.
* aix-thread.c: Remove _initialize_aix_thread prototype.
* alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype.
* alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype.
* alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep
prototype.
* alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype.
* alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype.
* alpha-tdep.c: Remove _initialize_alpha_tdep prototype.
* amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep
prototype.
* amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep
prototype.
* amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype.
* amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype.
* amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype.
* amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep
prototype.
* amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype.
* amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype.
* amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype.
* amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype.
* amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* amd64-tdep.c: Remove _initialize_amd64_tdep prototype.
* amd64-windows-nat.c: Remove _initialize_amd64_windows_nat
prototype.
* amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep
prototype.
* annotate.c: Remove _initialize_annotate prototype.
* arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype.
* arc-tdep.c: Remove _initialize_arc_tdep prototype.
* arch-utils.c: Remove _initialize_gdbarch_utils prototype.
* arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype.
* arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype.
* arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype.
* arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype.
* arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep
prototype.
* arm-tdep.c: Remove _initialize_arm_tdep prototype.
* arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype.
* auto-load.c: Remove _initialize_auto_load prototype.
* auxv.c: Remove _initialize_auxv prototype.
* avr-tdep.c: Remove _initialize_avr_tdep prototype.
* ax-gdb.c: Remove _initialize_ax_gdb prototype.
* bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype.
* bfin-tdep.c: Remove _initialize_bfin_tdep prototype.
* break-catch-sig.c: Remove _initialize_break_catch_sig prototype.
* break-catch-syscall.c: Remove _initialize_break_catch_syscall
prototype.
* break-catch-throw.c: Remove _initialize_break_catch_throw
prototype.
* breakpoint.c: Remove _initialize_breakpoint prototype.
* bsd-uthread.c: Remove _initialize_bsd_uthread prototype.
* btrace.c: Remove _initialize_btrace prototype.
* charset.c: Remove _initialize_charset prototype.
* cli/cli-cmds.c: Remove _initialize_cli_cmds prototype.
* cli/cli-dump.c: Remove _initialize_cli_dump prototype.
* cli/cli-interp.c: Remove _initialize_cli_interp prototype.
* cli/cli-logging.c: Remove _initialize_cli_logging prototype.
* cli/cli-script.c: Remove _initialize_cli_script prototype.
* coff-pe-read.c: Remove _initialize_coff_pe_read prototype.
* coffread.c: Remove _initialize_coffread prototype.
* compile/compile.c: Remove _initialize_compile prototype.
* complaints.c: Remove _initialize_complaints prototype.
* completer.c: Remove _initialize_completer prototype.
* copying.awk: Remove _initialize_copying prototype.
* copying.c: Regenerate.
* core-regset.c: Remove _initialize_core_regset prototype.
* corefile.c: Remove _initialize_core prototype.
* corelow.c: Remove _initialize_corelow prototype.
* cp-abi.c: Remove _initialize_cp_abi prototype.
* cp-namespace.c: Remove _initialize_cp_namespace prototype.
* cp-support.c: Remove _initialize_cp_support prototype.
* cp-valprint.c: Remove _initialize_cp_valprint prototype.
* cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype.
* cris-tdep.c: Remove _initialize_cris_tdep prototype.
* ctf.c: Remove _initialize_ctf prototype.
* d-lang.c: Remove _initialize_d_language prototype.
* darwin-nat-info.c: Remove _initialize_darwin_info_commands
prototype.
* darwin-nat.c: Remove _initialize_darwin_inferior prototype.
* dbxread.c: Remove _initialize_dbxread prototype.
* dcache.c: Remove _initialize_dcache prototype.
* demangle.c: Remove _initialize_demangler prototype.
* disasm-selftests.c: Remove _initialize_disasm_selftests
prototype.
* disasm.c: Remove _initialize_disasm prototype.
* dtrace-probe.c: Remove _initialize_dtrace_probe prototype.
* dummy-frame.c: Remove _initialize_dummy_frame prototype.
* dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame
prototype.
* dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype.
* dwarf2expr.c: Remove _initialize_dwarf2expr prototype.
* dwarf2loc.c: Remove _initialize_dwarf2loc prototype.
* dwarf2read.c: Remove _initialize_dwarf2_read prototype.
* elfread.c: Remove _initialize_elfread prototype.
* exec.c: Remove _initialize_exec prototype.
* extension.c: Remove _initialize_extension prototype.
* f-lang.c: Remove _initialize_f_language prototype.
* f-valprint.c: Remove _initialize_f_valprint prototype.
* fbsd-nat.c: Remove _initialize_fbsd_nat prototype.
* fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype.
* filesystem.c: Remove _initialize_filesystem prototype.
* findcmd.c: Remove _initialize_mem_search prototype.
* fork-child.c: Remove _initialize_fork_child prototype.
* frame-base.c: Remove _initialize_frame_base prototype.
* frame-unwind.c: Remove _initialize_frame_unwind prototype.
* frame.c: Remove _initialize_frame prototype.
* frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype.
* frv-tdep.c: Remove _initialize_frv_tdep prototype.
* ft32-tdep.c: Remove _initialize_ft32_tdep prototype.
* gcore.c: Remove _initialize_gcore prototype.
* gdb_bfd.c: Remove _initialize_gdb_bfd prototype.
* gdbarch.c: Regenerate.
* gdbarch.sh: Remove _initialize_gdbarch prototype.
* gdbtypes.c: Remove _initialize_gdbtypes prototype.
* gnu-nat.c: Remove _initialize_gnu_nat prototype.
* gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype.
* gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype.
* go-lang.c: Remove _initialize_go_language prototype.
* go32-nat.c: Remove _initialize_go32_nat prototype.
* guile/guile.c: Remove _initialize_guile prototype.
* h8300-tdep.c: Remove _initialize_h8300_tdep prototype.
* hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype.
* hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype.
* hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype.
* hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype.
* hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype.
* hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype.
* hppa-tdep.c: Remove _initialize_hppa_tdep prototype.
* i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype.
* i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep
prototype.
* i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep
prototype.
* i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype.
* i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype.
* i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype.
* i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype.
* i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype.
* i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype.
* i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype.
* i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype.
* i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype.
* i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype.
* i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype.
* i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype.
* i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype.
* i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* i386-tdep.c: Remove _initialize_i386_tdep prototype.
* i386-windows-nat.c: Remove _initialize_i386_windows_nat
prototype.
* ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame
prototype.
* ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype.
* ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype.
* ia64-tdep.c: Remove _initialize_ia64_tdep prototype.
* ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype.
* infcall.c: Remove _initialize_infcall prototype.
* infcmd.c: Remove _initialize_infcmd prototype.
* inferior.c: Remove _initialize_inferiors prototype.
* inflow.c: Remove _initialize_inflow prototype.
* infrun.c: Remove _initialize_infrun prototype.
* interps.c: Remove _initialize_interpreter prototype.
* iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype.
* jit.c: Remove _initialize_jit prototype.
* language.c: Remove _initialize_language prototype.
* linux-fork.c: Remove _initialize_linux_fork prototype.
* linux-nat.c: Remove _initialize_linux_nat prototype.
* linux-tdep.c: Remove _initialize_linux_tdep prototype.
* linux-thread-db.c: Remove _initialize_thread_db prototype.
* lm32-tdep.c: Remove _initialize_lm32_tdep prototype.
* m2-lang.c: Remove _initialize_m2_language prototype.
* m32c-tdep.c: Remove _initialize_m32c_tdep prototype.
* m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype.
* m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype.
* m32r-tdep.c: Remove _initialize_m32r_tdep prototype.
* m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype.
* m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-tdep.c: Remove _initialize_m68k_tdep prototype.
* m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* machoread.c: Remove _initialize_machoread prototype.
* macrocmd.c: Remove _initialize_macrocmd prototype.
* macroscope.c: Remove _initialize_macroscope prototype.
* maint.c: Remove _initialize_maint_cmds prototype.
* mdebugread.c: Remove _initialize_mdebugread prototype.
* memattr.c: Remove _initialize_mem prototype.
* mep-tdep.c: Remove _initialize_mep_tdep prototype.
* mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype.
* mi/mi-cmds.c: Remove _initialize_mi_cmds prototype.
* mi/mi-interp.c: Remove _initialize_mi_interp prototype.
* mi/mi-main.c: Remove _initialize_mi_main prototype.
* microblaze-linux-tdep.c: Remove
_initialize_microblaze_linux_tdep prototype.
* microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype.
* mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype.
* mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype.
* mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype.
* mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype.
* mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype.
* mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype.
* mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype.
* mips-tdep.c: Remove _initialize_mips_tdep prototype.
* mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype.
* mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep
prototype.
* mipsread.c: Remove _initialize_mipsread prototype.
* mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep
prototype.
* mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype.
* moxie-tdep.c: Remove _initialize_moxie_tdep prototype.
* msp430-tdep.c: Remove _initialize_msp430_tdep prototype.
* mt-tdep.c: Remove _initialize_mt_tdep prototype.
* nds32-tdep.c: Remove _initialize_nds32_tdep prototype.
* nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep
prototype.
* nios2-tdep.c: Remove _initialize_nios2_tdep prototype.
* nto-procfs.c: Remove _initialize_procfs prototype.
* nto-tdep.c: Remove _initialize_nto_tdep prototype.
* objc-lang.c: Remove _initialize_objc_language prototype.
* objfiles.c: Remove _initialize_objfiles prototype.
* observer.c: Remove observer_test_first_notification_function,
observer_test_second_notification_function,
observer_test_third_notification_function, and
_initialize_observer prototypes.
* opencl-lang.c: Remove _initialize_opencl_language prototypes.
* osabi.c: Remove _initialize_gdb_osabi prototype.
* osdata.c: Remove _initialize_osdata prototype.
* p-valprint.c: Remove _initialize_pascal_valprint prototype.
* parse.c: Remove _initialize_parse prototype.
* ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype.
* ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype.
* ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype.
* ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype.
* ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype.
* ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype.
* ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype.
* ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype.
* printcmd.c: Remove _initialize_printcmd prototype.
* probe.c: Remove _initialize_probe prototype.
* proc-api.c: Remove _initialize_proc_api prototype.
* proc-events.c: Remove _initialize_proc_events prototype.
* proc-service.c: Remove _initialize_proc_service prototype.
* procfs.c: Remove _initialize_procfs prototype.
* psymtab.c: Remove _initialize_psymtab prototype.
* python/python.c: Remove _initialize_python prototype.
* ravenscar-thread.c: Remove _initialize_ravenscar prototype.
* record-btrace.c: Remove _initialize_record_btrace prototype.
* record-full.c: Remove _initialize_record_full prototype.
* record.c: Remove _initialize_record prototype.
* regcache.c: Remove _initialize_regcache prototype.
* reggroups.c: Remove _initialize_reggroup prototype.
* remote-notif.c: Remove _initialize_notif prototype.
* remote-sim.c: Remove _initialize_remote_sim prototype.
* remote.c: Remove _initialize_remote prototype.
* reverse.c: Remove _initialize_reverse prototype.
* rl78-tdep.c: Remove _initialize_rl78_tdep prototype.
* rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype.
* rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep
prototype.
* rs6000-nat.c: Remove _initialize_rs6000_nat prototype.
* rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype.
* rust-exp.y: Remove _initialize_rust_exp prototype.
* rx-tdep.c: Remove _initialize_rx_tdep prototype.
* s390-linux-nat.c: Remove _initialize_s390_nat prototype.
* s390-linux-tdep.c: Remove _initialize_s390_tdep prototype.
* score-tdep.c: Remove _initialize_score_tdep prototype.
* selftest-arch.c: Remove _initialize_selftests_foreach_arch
prototype.
* ser-go32.c: Remove _initialize_ser_dos prototype.
* ser-mingw.c: Remove _initialize_ser_windows prototype.
* ser-pipe.c: Remove _initialize_ser_pipe prototype.
* ser-tcp.c: Remove _initialize_ser_tcp prototype.
* ser-unix.c: Remove _initialize_ser_hardwire prototype.
* serial.c: Remove _initialize_serial prototype.
* sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype.
* sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype.
* sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype.
* sh-tdep.c: Remove _initialize_sh_tdep prototype.
* skip.c: Remove _initialize_step_skip prototype.
* sol-thread.c: Remove _initialize_sol_thread prototype.
* solib-aix.c: Remove _initialize_solib_aix prototype.
* solib-darwin.c: Remove _initialize_darwin_solib prototype.
* solib-dsbt.c: Remove _initialize_dsbt_solib prototype.
* solib-frv.c: Remove _initialize_frv_solib prototype.
* solib-spu.c: Remove _initialize_spu_solib prototype.
* solib-svr4.c: Remove _initialize_svr4_solib prototype.
* solib-target.c: Remove _initialize_solib_target prototype.
* solib.c: Remove _initialize_solib prototype.
* source.c: Remove _initialize_source prototype.
* sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype.
* sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep
prototype.
* sparc-nat.c: Remove _initialize_sparc_nat prototype.
* sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype.
* sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype.
* sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep
prototype.
* sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype.
* sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype.
* sparc-tdep.c: Remove _initialize_sparc_tdep prototype.
* sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat
prototype.
* sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep
prototype.
* sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat
prototype.
* sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep
prototype.
* sparc64-nat.c: Remove _initialize_sparc64_nat prototype.
* sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat
prototype.
* sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep
prototype.
* sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat
prototype.
* sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep
prototype.
* sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep
prototype.
* spu-linux-nat.c: Remove _initialize_spu_nat prototype.
* spu-multiarch.c: Remove _initialize_spu_multiarch prototype.
* spu-tdep.c: Remove _initialize_spu_tdep prototype.
* stabsread.c: Remove _initialize_stabsread prototype.
* stack.c: Remove _initialize_stack prototype.
* stap-probe.c: Remove _initialize_stap_probe prototype.
* std-regs.c: Remove _initialize_frame_reg prototype.
* symfile-debug.c: Remove _initialize_symfile_debug prototype.
* symfile-mem.c: Remove _initialize_symfile_mem prototype.
* symfile.c: Remove _initialize_symfile prototype.
* symmisc.c: Remove _initialize_symmisc prototype.
* symtab.c: Remove _initialize_symtab prototype.
* target-dcache.c: Remove _initialize_target_dcache prototype.
* target-descriptions.c: Remove _initialize_target_descriptions
prototype.
* thread.c: Remove _initialize_thread prototype.
* tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep
prototype.
* tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype.
* tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype.
* tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep
prototype.
* tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype.
* tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype.
* tracefile.c: Remove _initialize_tracefile prototype.
* tracepoint.c: Remove _initialize_tracepoint prototype.
* tui/tui-hooks.c: Remove _initialize_tui_hooks prototype.
* tui/tui-interp.c: Remove _initialize_tui_interp prototype.
* tui/tui-layout.c: Remove _initialize_tui_layout prototype.
* tui/tui-regs.c: Remove _initialize_tui_regs prototype.
* tui/tui-stack.c: Remove _initialize_tui_stack prototype.
* tui/tui-win.c: Remove _initialize_tui_win prototype.
* tui/tui.c: Remove _initialize_tui prototype.
* typeprint.c: Remove _initialize_typeprint prototype.
* user-regs.c: Remove _initialize_user_regs prototype.
* utils.c: Remove _initialize_utils prototype.
* v850-tdep.c: Remove _initialize_v850_tdep prototype.
* valarith.c: Remove _initialize_valarith prototype.
* valops.c: Remove _initialize_valops prototype.
* valprint.c: Remove _initialize_valprint prototype.
* value.c: Remove _initialize_values prototype.
* varobj.c: Remove _initialize_varobj prototype.
* vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype.
* vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype.
* vax-tdep.c: Remove _initialize_vax_tdep prototype.
* windows-nat.c: Remove _initialize_windows_nat,
_initialize_check_for_gdb_ini, and _initialize_loadable
prototypes.
* windows-tdep.c: Remove _initialize_windows_tdep prototype.
* xcoffread.c: Remove _initialize_xcoffread prototype.
* xml-support.c: Remove _initialize_xml_support prototype.
* xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype.
* xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat
prototype.
* xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep
prototype.
* xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.
|
|
As a preparation for the next patch, which will move fork_inferior
from GDB to common/ (and therefore share it with gdbserver), it is
interesting to convert a few functions to C++.
This patch touches functions related to parsing command-line arguments
to the inferior (see gdb/fork-child.c:breakup_args), the way the
arguments are stored on fork_inferior (using std::vector instead of
char **), and the code responsible for dealing with argv also on
gdbserver.
I've taken this opportunity and decided to constify a few arguments to
fork_inferior/create_inferior as well, in order to make the code
cleaner. And now, on gdbserver, we're using xstrdup everywhere and
aren't checking for memory allocation failures anymore, as requested
by Pedro:
<https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html>
Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com>
Pedro Alves wrote:
> On the "== NULL" check: IIUC, the old NULL check was there to
> handle strdup returning NULL due to out-of-memory.
> See NULL checks and comments further above in this function.
> Now that you're using a std::vector, that doesn't work or make
> sense any longer, since if push_back fails to allocate space for
> its internal buffer (with operator new), our operator new replacement
> (common/new-op.c) calls malloc_failure, which aborts gdbserver.
>
> Not sure it makes sense to handle out-of-memory specially in
> the gdb/rsp-facing functions nowadays (maybe git blame/log/patch
> submission for that code shows some guidelines). Maybe (or, probably)
> it's OK to stop caring about it, but then we should consistently remove
> left over code, by using xstrdup instead and remove the NULL checks.
IMO this refactoring was very good to increase the readability of the
code as well, because some parts of the argument handling were
unnecessarily confusing before.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* common/common-utils.c (free_vector_argv): New function.
* common/common-utils.h: Include <vector>.
(free_vector_argv): New prototype.
* darwin-nat.c (darwin_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* fork-child.c: Include <vector>.
(breakup_args): Rewrite function, using C++.
(fork_inferior): Rewrite function header, constify "exec_file_arg"
and accept "std::string" for "allargs". Update the code to
calculate "argv" based on "allargs". Update calls to "exec_fun"
and "execvp".
* gnu-nat.c (gnu_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* go32-nat.c (go32_create_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_create_inferior): Likewise.
* infcmd.c (run_command_1): Constify "exec_file". Use
"std::string" for inferior arguments.
* inferior.h (fork_inferior): Update prototype.
* linux-nat.c (linux_nat_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* nto-procfs.c (procfs_create_inferior): Likewise.
* procfs.c (procfs_create_inferior): Likewise.
* remote-sim.c (gdbsim_create_inferior): Likewise.
* remote.c (extended_remote_run): Update code to accept
"std::string" as argument.
(extended_remote_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* rs6000-nat.c (super_create_inferior): Likewise.
(rs6000_create_inferior): Likewise.
* target.h (struct target_ops) <to_create_inferior>: Likewise.
* windows-nat.c (windows_create_inferior): Likewise.
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include <vector>.
<program_argv, wrapper_argv>: Convert to std::vector.
(start_inferior): Rewrite function to use C++.
(handle_v_run): Likewise. Update code that calculates the argv
based on the vRun packet; use C++.
(captured_main): Likewise.
|
|
This patch contains almost all of the remaining changes needed to make
to_fetch_registers/to_store_registers/to_prepare_to_store independent of
inferior_ptid. It contains only some "trivial" changes, the more
complicated ones are in separate patches.
gdb/ChangeLog:
* i386-linux-nat.c (fetch_register, store_register,
i386_linux_fetch_inferior_registers,
i386_linux_store_inferior_registers): Use ptid from regcache.
* ia64-linux-nat.c (ia64_linux_fetch_register,
ia64_linux_store_register): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register,
inf_ptrace_store_register): Likewise.
* m32r-linux-nat.c (m32r_linux_fetch_inferior_registers,
m32r_linux_store_inferior_registers): Likewise.
* m68k-bsd-nat.c (m68kbsd_fetch_inferior_registers,
m68kbsd_store_inferior_registers): Likewise.
* m68k-linux-nat.c (fetch_register, store_register,
m68k_linux_fetch_inferior_registers,
m68k_linux_store_inferior_registers): Likewise.
* m88k-bsd-nat.c (m88kbsd_fetch_inferior_registers,
m88kbsd_store_inferior_registers): Likewise.
* mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers,
mips_fbsd_store_inferior_registers): Likewise.
* mips-linux-nat.c (mips64_linux_regsets_fetch_registers,
mips64_linux_regsets_store_registers): Likewise.
* mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers,
mipsnbsd_store_inferior_registers): Likewise.
* mips-obsd-nat.c (mips64obsd_fetch_inferior_registers,
mips64obsd_store_inferior_registers): Likewise.
* nto-procfs.c (procfs_fetch_registers, procfs_store_registers):
Likewise.
* ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers,
ppcfbsd_store_inferior_registers): Likewise.
* ppc-linux-nat.c (ppc_linux_fetch_inferior_registers,
ppc_linux_store_inferior_registers): Likewise.
* ppc-nbsd-nat.c (ppcnbsd_fetch_inferior_registers,
ppcnbsd_store_inferior_registers): Likewise.
* ppc-obsd-nat.c (ppcobsd_fetch_registers,
ppcobsd_store_registers): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers):
Likewise.
* ravenscar-thread.c (ravenscar_fetch_registers,
ravenscar_store_registers, ravenscar_prepare_to_store):
Likewise.
* record-btrace.c (record_btrace_fetch_registers,
record_btrace_store_registers, record_btrace_prepare_to_store):
Likewise.
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
Lookup inferior using ptid from regcache, instead of
current_inferior.
* remote.c (remote_fetch_registers, remote_store_registers): Use
ptid from regcache.
* rs6000-nat.c (fetch_register, store_register): Likewise.
* s390-linux-nat.c (s390_linux_fetch_inferior_registers,
s390_linux_store_inferior_registers): Likewise.
* sh-nbsd-nat.c (shnbsd_fetch_inferior_registers,
shnbsd_store_inferior_registers): Likewise.
* sol-thread.c (sol_thread_fetch_registers,
sol_thread_store_registers): Likewise.
* sparc-nat.c (sparc_fetch_inferior_registers,
sparc_store_inferior_registers): Likewise.
* tilegx-linux-nat.c (fetch_inferior_registers,
store_inferior_registers): Likewise.
* vax-bsd-nat.c (vaxbsd_fetch_inferior_registers,
vaxbsd_store_inferior_registers): Likewise.
* xtensa-linux-nat.c (fetch_gregs, store_gregs, fetch_xtregs,
store_xtregs): Likewise.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This patch consolidates the API of target_mourn_inferior between GDB
and gdbserver, in my continuing efforts to make sharing the
fork_inferior function possible between both.
GDB's version of the function did not care about the inferior's ptid
being mourned, but gdbserver's needed to know this information. Since
it actually makes sense to pass the ptid as an argument, instead of
depending on a global value directly (which GDB's version did), I
decided to make the generic API to accept it. I then went on and
extended all calls being made on GDB to include a ptid argument (which
ended up being inferior_ptid most of the times, anyway), and now we
have a more sane interface.
On GDB's side, after talking to Pedro a bit about it, we decided that
just an assertion to make sure that the ptid being passed is equal to
inferior_ptid would be enough for now, on the GDB side. We can remove
the assertion and perform more operations later if we ever pass
anything different than inferior_ptid.
Regression tested on our BuildBot, everything OK.
I'd appreciate a special look at gdb/windows-nat.c's modification
because I wasn't really sure what to do there. It seemed to me that
maybe I should build a ptid out of the process information there, but
then I am almost sure the assertion on GDB's side would trigger.
gdb/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* darwin-nat.c (darwin_kill_inferior): Adjusting call to
target_mourn_inferior to include ptid_t argument.
* fork-child.c (startup_inferior): Likewise.
* gnu-nat.c (gnu_kill_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_kill): Likewise.
* infrun.c (handle_inferior_event_1): Likewise.
* linux-nat.c (linux_nat_attach): Likewise.
(linux_nat_kill): Likewise.
* nto-procfs.c (interrupt_query): Likewise.
(procfs_interrupt): Likewise.
(procfs_kill_inferior): Likewise.
* procfs.c (procfs_kill_inferior): Likewise.
* record.c (record_mourn_inferior): Likewise.
* remote-sim.c (gdbsim_kill): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_kill): Likewise.
* target.c (target_mourn_inferior): Change declaration to accept
new ptid_t argument; use gdb_assert on it.
* target.h (target_mourn_inferior): Move function prototype from
here...
* target/target.h (target_mourn_inferior): ... to here. Adjust it
to accept new ptid_t argument.
* windows-nat.c (get_windows_debug_event): Adjusting call to
target_mourn_inferior to include ptid_t argument.
gdb/gdbserver/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (start_inferior): Call target_mourn_inferior instead of
mourn_inferior; pass ptid_t argument to it.
(resume): Likewise.
(handle_target_event): Likewise.
* target.c (target_mourn_inferior): New function.
* target.h (mourn_inferior): Delete macro.
|
|
Otherwise including <string> or some other C++ header is broken.
E.g.:
In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0,
from /opt/gcc/include/c++/7.0.0/string:40,
from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68:
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
max(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
In file included from .../src/gdb/infrun.c:21:0:
To the best of my grepping abilities, I believe I adjusted all min/max
calls.
gdb/ChangeLog:
2016-09-16 Pedro Alves <palves@redhat.com>
* defs.h (min, max): Delete.
* aarch64-tdep.c: Include <algorithm> and use std::min and
std::max throughout.
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* ctf.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* environ.c: Likewise.
* exec.c: Likewise.
* f-exp.y: Likewise.
* findcmd.c: Likewise.
* ft32-tdep.c: Likewise.
* gcore.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* linux-thread-db.c: Likewise.
* lm32-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* memrange.c: Likewise.
* minidebug.c: Likewise.
* mips-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* nds32-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* parse.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* probe.c: Likewise.
* record-btrace.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-linux-tdep.c: Likewise.
* ser-tcp.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* source.c: Likewise.
* sparc-tdep.c: Likewise.
* symfile.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* xtensa-tdep.c: Likewise.
* cli/cli-cmds.c: Likewise.
* compile/compile-object-load.c: Likewise.
|
|
So the target knows whether we're detaching breakpoints.
Nothing uses the parameter in this patch yet.
gdb/ChangeLog:
2016-08-10 Pedro Alves <palves@redhat.com>
PR gdb/19187
* break-catch-sig.c (signal_catchpoint_remove_location): Adjust
interface.
* break-catch-syscall.c (remove_catch_syscall):
* breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h.
(remove_breakpoint_1): Pass 'reason' down.
(remove_catch_fork, remove_catch_vfork, remove_catch_solib)
(remove_catch_exec, remove_watchpoint, remove_masked_watchpoint)
(base_breakpoint_remove_location, bkpt_remove_location)
(bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust
interface.
* breakpoint.h (enum remove_bp_reason): Moved here from
breakpoint.c.
(struct breakpoint_ops) <remove_location>: Add 'reason' parameter.
* corelow.c (core_remove_breakpoint): New function.
(init_core_ops): Install it as to_remove_breakpoint method.
* exec.c (exec_remove_breakpoint): New function.
(init_exec_ops): Install it as to_remove_breakpoint method.
* mem-break.c (memory_remove_breakpoint): Adjust interface.
* record-btrace.c (record_btrace_remove_breakpoint): Adjust
interface.
* record-full.c (record_full_remove_breakpoint)
(record_full_core_remove_breakpoint): Adjust interface.
* remote.c (remote_remove_breakpoint): Adjust interface.
* target-debug.h (target_debug_print_enum_remove_bp_reason): New
macro.
* target-delegates.c: Regenerate.
* target.c (target_remove_breakpoint): Add 'reason' parameter.
* target.h (struct target_ops) <to_remove_breakpoint>: Add
'reason' parameter.
(target_remove_breakpoint, memory_remove_breakpoint): Add 'reason'
parameter.
|
|
Several targets have a copy of the same code that prints
"Detaching from program ..."
in their target_detach implementation. Factor that out to a common
function.
(For now, I left the couple targets that print this a bit differently
alone. Maybe this could be further pulled out into infcmd.c. If we
did that, and those targets want to continue printing differently,
this new function could be converted to a target method.)
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_detach): Use target_announce_detach.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
* target.c (target_announce_detach): New function.
* target.h (target_announce_detach): New declaration.
|
|
Any time a caller calls query & friends / prompt_for_continue without
ensuring that gdb owns the terminal for input is a bug. So do that in
defaulted_query / prompt_for_continue directly instead.
An example of a case where we currently miss calling
target_terminal_ours is internal_error. Ever since defaulted_query
was made to use gdb_readline_callback, there's no way to answer the
internal error query if the internal error happens while the target is
has the terminal:
(gdb) c
Continuing.
.../src/gdb/linux-nat.c:1676: internal-error: linux_nat_resume: Assertion `dummy_counter < 10' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) _
Entering 'y' or 'n' does not work, GDB does not respond.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gnu-nat.c (inf_validate_task_sc): Don't call
target_terminal_ours / target_terminal_inferior around query.
* i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
call target_terminal_ours / target_terminal_inferior around
yquery.
* linux-record.c (record_linux_system_call): Don't call
target_terminal_ours / target_terminal_inferior around yquery.
* nto-procfs.c (interrupt_query): Don't call target_terminal_ours
/ target_terminal_inferior around query.
* record-full.c (record_full_check_insn_num): Remove
'set_terminal' parameter. Don't call target_terminal_ours /
target_terminal_inferior around query.
(record_full_message, record_full_registers_change)
(record_full_xfer_partial): Adjust.
* remote.c (interrupt_query): Don't call target_terminal_ours /
target_terminal_inferior around query.
* utils.c (defaulted_query): Install cleanup to restore target
terminal. Put target_terminal_ours_for_output in effect while
defaulted producing, and target_terminal_ours in in effect while
handling input.
(prompt_for_continue): Install cleanup to restore target terminal.
Put target_terminal_ours in in effect while handling input.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
Fix 'stopped by watchpoint' detection: add inferior data, use inferior data
for storing last stopped flags needed for detection.
gdb/ChangeLog:
* nto-procfs.c (procfs_wait): Set stopped_flags nad stopped_pc.
(procfs_stopped_by_watchpoint): Use flags stored in inferior data.
* nto-tdep.c (nto_new_inferior_data_reg): New definition.
(nto_new_inferior_data, nto_inferior_data_cleanup, nto_inferior_data):
New functions.
(_initialize_nto_tdep): New forward declaration, new function.
* nto-tdep.h (struct nto_inferior_data): New struct.
(nto_inferior_data): New function declaration.
|
|
gdb/ChangeLog:
* gdb/nto-procfs.c (procfs_pid_to_exec_file): New function.
(init_procfs_targets): Wire new function.
|
|
Fix 'info auxv' for nto.
gdb/ChangeLog:
* nto-procfs.c (sys/auxv.h): Include.
(procfs_xfer_partial): Implement TARGET_OBJECT_AUXV.
* nto-tdep.c (nto_read_auxv_from_initial_stack): New function.
* nto-tdep.h (nto_read_auxv_from_initial_stack): New declaration.
|
|
Fix errnoeus construction of procfs path. The issue is, after the first
info pidlist or first run, the path for local node (the most common node)
will be reset to empty which makes subsequent queries and runs impossible.
gdb/ChangeLog:
* nto-procfs.c (nto_procfs_path): Rename to...
(nodestr): ... this, and change type.
(nto_node): Use new variable and logic accordingly.
(procfs_open_1): Use new variable name. Use local buffer to construct
procfrs path.
(procfs_pidlist): Use NODESTR to construct procfs path.
(procfs_files_info): Use NODESTR to output meaningful text.
(do_attach): Construct procfs using NODESTR.
(procfs_create_inferior): Compare pointer to NULL.
|
|
gdb/gdbserver/ChangeLog:
* gdbserver/nto-low.c (nto_insert_point, nto_remove_point): Fix
variable name.
gdb/ChangeLog:
* nto-procfs.c (common/filestuff.h): Include.
(procfs_can_use_hw_breakpoint): Fix enum name.
(procfs_open_1): Fix compiler warning.
(procfs_pidlist): Make static.
(procfs_meminfo): Make static, fix type name, add missing argument.
(procfs_store_registers): Make static.
(procfs_thread_info): Remove unused function.
(_initialize_procfs): Forward declare.
|
|
This fixes 14 build errors like these in C++ mode:
src/gdb/extension.c: In function ‘void install_sigint_handler(const signal_handler*)’:
src/gdb/extension.c:698:41: error: invalid conversion from ‘void (*)()’ to ‘__sighandler_t {aka void (*)(int)}’ [-fpermissive]
signal (SIGINT, handler_state->handler);
^
In file included from build-gnulib/import/signal.h:52:0,
from ../../src/gdb/extension.c:24:
/usr/include/signal.h:102:23: error: initializing argument 2 of ‘void (* signal(int, __sighandler_t))(int)’ [-fpermissive]
extern __sighandler_t signal (int __sig, __sighandler_t __handler)
^
Instead of this everywhere:
- RETSIGTYPE (*handle_sigint_for_compare) () = handle_sigint;
+ RETSIGTYPE (*handle_sigint_for_compare) (int) = handle_sigint;
Use sighandler_t (a GNU extension). That's OK to use unconditionaly
because gnulib's signal.h replacement makes sure that it is available.
gdb/ChangeLog:
2015-08-27 Pedro Alves <palves@redhat.com>
* cp-support.c (gdb_demangle): Use sighandler_t. Remove cast.
* extension-priv.h: Include signal.h.
(struct signal_handler) <handler>: Change type to sighandler_t.
* extension.c (install_gdb_sigint_handler): Use sighandler_t.
* inflow.c (sigint_ours, sigquit_ours): Change type to
sighandler_t.
(child_terminal_inferior): Remove casts.
(child_terminal_ours_1, new_tty): Use sighandler_t. Remove casts.
(osig): Change type to sighandler_t.
* nto-procfs.c (ofunc): Change type to sighandler_t.
(procfs_wait): Remove casts.
* remote-m32r-sdi.c (m32r_wait, m32r_load): Use sighandler_t.
* remote-sim.c (gdbsim_wait): Use sighandler_t.
* utils.c (wait_to_die_with_timeout): Use sighandler_t.
|
|
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is
to change some calls to the xmalloc family of functions to calls to the
equivalents in the XNEW family. This avoids adding an explicit cast, so
it keeps the code a bit more readable. Some of them also map relatively
well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be
possible to do scripted replacements if needed.
I only changed calls that were obviously allocating memory for one or
multiple "objects". Allocation of variable sizes (such as strings or
buffer handling) will be for later (and won't use XNEW).
- xmalloc (sizeof (struct foo)) -> XNEW (struct foo)
- xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num)
- xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo)
- xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num)
- xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num)
- obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo)
- obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num)
- alloca (sizeof (struct foo)) -> XALLOCA (struct foo)
- alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num)
Some instances of xmalloc followed by memset to zero the buffer were
replaced by XCNEW or XCNEWVEC.
I regtested on x86-64, Ubuntu 14.04, but the patch touches many
architecture-specific files. For those I'll have to rely on the
buildbot or people complaining that I broke their gdb.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_add_process): Likewise.
* aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
* ada-exp.y (write_ambiguous_var): Likewise.
* ada-lang.c (resolve_subexp): Likewise.
(user_select_syms): Likewise.
(assign_aggregate): Likewise.
(ada_evaluate_subexp): Likewise.
(cache_symbol): Likewise.
* addrmap.c (allocate_key): Likewise.
(addrmap_create_mutable): Likewise.
* aix-thread.c (sync_threadlists): Likewise.
* alpha-tdep.c (alpha_push_dummy_call): Likewise.
(alpha_gdbarch_init): Likewise.
* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
* arm-linux-nat.c (arm_linux_add_process): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* arm-tdep.c (push_stack_item): Likewise.
(arm_displaced_step_copy_insn): Likewise.
(arm_gdbarch_init): Likewise.
(_initialize_arm_tdep): Likewise.
* avr-tdep.c (push_stack_item): Likewise.
* ax-general.c (new_agent_expr): Likewise.
* block.c (block_initialize_namespace): Likewise.
* breakpoint.c (alloc_counted_command_line): Likewise.
(update_dprintf_command_list): Likewise.
(parse_breakpoint_sals): Likewise.
(decode_static_tracepoint_spec): Likewise.
(until_break_command): Likewise.
(clear_command): Likewise.
(update_global_location_list): Likewise.
(get_breakpoint_objfile_data) Likewise.
* btrace.c (ftrace_new_function): Likewise.
(btrace_set_insn_history): Likewise.
(btrace_set_call_history): Likewise.
* buildsym.c (add_symbol_to_list): Likewise.
(record_pending_block): Likewise.
(start_subfile): Likewise.
(start_buildsym_compunit): Likewise.
(push_subfile): Likewise.
(end_symtab_get_static_block): Likewise.
(buildsym_init): Likewise.
* cli/cli-cmds.c (source_command): Likewise.
* cli/cli-decode.c (add_cmd): Likewise.
* cli/cli-script.c (build_command_line): Likewise.
(setup_user_args): Likewise.
(realloc_body_list): Likewise.
(process_next_line): Likewise.
(copy_command_lines): Likewise.
* cli/cli-setshow.c (do_set_command): Likewise.
* coff-pe-read.c (read_pe_exported_syms): Likewise.
* coffread.c (coff_locate_sections): Likewise.
(coff_symtab_read): Likewise.
(coff_read_struct_type): Likewise.
* common/cleanups.c (make_my_cleanup2): Likewise.
* common/common-exceptions.c (throw_it): Likewise.
* common/filestuff.c (make_cleanup_close): Likewise.
* common/format.c (parse_format_string): Likewise.
* common/queue.h (DEFINE_QUEUE_P): Likewise.
* compile/compile-object-load.c (munmap_list_add): Likewise.
(compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (append_args): Likewise.
* corefile.c (specify_exec_file_hook): Likewise.
* cp-support.c (make_symbol_overload_list): Likewise.
* cris-tdep.c (push_stack_item): Likewise.
(cris_gdbarch_init): Likewise.
* ctf.c (ctf_trace_file_writer_new): Likewise.
* dbxread.c (init_header_files): Likewise.
(add_new_header_file): Likewise.
(init_bincl_list): Likewise.
(dbx_end_psymtab): Likewise.
(start_psymtab): Likewise.
(dbx_end_psymtab): Likewise.
* dcache.c (dcache_init): Likewise.
* dictionary.c (dict_create_hashed): Likewise.
(dict_create_hashed_expandable): Likewise.
(dict_create_linear): Likewise.
(dict_create_linear_expandable): Likewise.
* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
* dummy-frame.c (register_dummy_frame_dtor): Likewise.
* dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
* dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
(decode_frame_entry_1): Likewise.
* dwarf2expr.c (new_dwarf_expr_context): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
* dwarf2read.c (dwarf2_has_info): Likewise.
(create_signatured_type_table_from_index): Likewise.
(dwarf2_read_index): Likewise.
(dw2_get_file_names_reader): Likewise.
(create_all_type_units): Likewise.
(read_cutu_die_from_dwo): Likewise.
(init_tu_and_read_dwo_dies): Likewise.
(init_cutu_and_read_dies): Likewise.
(create_all_comp_units): Likewise.
(queue_comp_unit): Likewise.
(inherit_abstract_dies): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_add_field): Likewise.
(dwarf2_add_typedef): Likewise.
(dwarf2_add_member_fn): Likewise.
(attr_to_dynamic_prop): Likewise.
(abbrev_table_alloc_abbrev): Likewise.
(abbrev_table_read_table): Likewise.
(add_include_dir): Likewise.
(add_file_name): Likewise.
(dwarf_decode_line_header): Likewise.
(dwarf2_const_value_attr): Likewise.
(dwarf_alloc_block): Likewise.
(parse_macro_definition): Likewise.
(set_die_type): Likewise.
(write_psymtabs_to_index): Likewise.
(create_cus_from_index): Likewise.
(dwarf2_create_include_psymtab): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(build_type_psymtab_dependencies): Likewise.
(read_comp_units_from_section): Likewise.
(compute_compunit_symtab_includes): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(read_func_scope): Likewise.
(process_structure_scope): Likewise.
(mark_common_block_symbol_computed): Likewise.
(load_partial_dies): Likewise.
(dwarf2_symbol_mark_computed): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_read_minimal_symbols): Likewise.
* environ.c (make_environ): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* event-loop.c (create_file_handler): Likewise.
(create_async_signal_handler): Likewise.
(create_async_event_handler): Likewise.
(create_timer): Likewise.
* exec.c (build_section_table): Likewise.
* fbsd-nat.c (fbsd_remember_child): Likewise.
* fork-child.c (fork_inferior): Likewise.
* frv-tdep.c (new_variant): Likewise.
* gdbarch.sh (gdbarch_alloc): Likewise.
(append_name): Likewise.
* gdbtypes.c (rank_function): Likewise.
(copy_type_recursive): Likewise.
(add_dyn_prop): Likewise.
* gnu-nat.c (make_proc): Likewise.
(make_inf): Likewise.
(gnu_write_inferior): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
(build_std_type_info_type): Likewise.
* guile/scm-param.c (compute_enum_list): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* guile/scm-value.c (gdbscm_value_call): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
(read_unwind_info): Likewise.
* ia64-tdep.c (ia64_gdbarch_init): Likewise.
* infcall.c (dummy_frame_context_saver_setup): Likewise.
(call_function_by_hand_dummy): Likewise.
* infcmd.c (step_once): Likewise.
(finish_forward): Likewise.
(attach_command): Likewise.
(notice_new_inferior): Likewise.
* inferior.c (add_inferior_silent): Likewise.
* infrun.c (add_displaced_stepping_state): Likewise.
(save_infcall_control_state): Likewise.
(save_inferior_ptid): Likewise.
(_initialize_infrun): Likewise.
* jit.c (bfd_open_from_target_memory): Likewise.
(jit_gdbarch_data_init): Likewise.
* language.c (add_language): Likewise.
* linespec.c (decode_line_2): Likewise.
* linux-nat.c (add_to_pid_list): Likewise.
(add_initial_lwp): Likewise.
* linux-thread-db.c (add_thread_db_info): Likewise.
(record_thread): Likewise.
(info_auto_load_libthread_db): Likewise.
* m32c-tdep.c (m32c_gdbarch_init): Likewise.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* m88k-tdep.c (m88k_analyze_prologue): Likewise.
* macrocmd.c (macro_define_command): Likewise.
* macroexp.c (gather_arguments): Likewise.
* macroscope.c (sal_macro_scope): Likewise.
* macrotab.c (new_macro_table): Likewise.
* mdebugread.c (push_parse_stack): Likewise.
(parse_partial_symbols): Likewise.
(parse_symbol): Likewise.
(psymtab_to_symtab_1): Likewise.
(new_block): Likewise.
(new_psymtab): Likewise.
(mdebug_build_psymtabs): Likewise.
(add_pending): Likewise.
(elfmdebug_build_psymtabs): Likewise.
* mep-tdep.c (mep_gdbarch_init): Likewise.
* mi/mi-main.c (mi_execute_command): Likewise.
* mi/mi-parse.c (mi_parse_argv): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (terminate_minimal_symbol_table): Likewise.
* mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
* msp430-tdep.c (msp430_gdbarch_init): Likewise.
* mt-tdep.c (mt_registers_info): Likewise.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
* nat/linux-btrace.c (linux_enable_bts): Likewise.
(linux_enable_pt): Likewise.
* nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
(linux_xfer_osdata_processgroups): Likewise.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* nto-procfs.c (procfs_meminfo): Likewise.
* objc-lang.c (start_msglist): Likewise.
(selectors_info): Likewise.
(classes_info): Likewise.
(find_methods): Likewise.
* objfiles.c (allocate_objfile): Likewise.
(update_section_map): Likewise.
* osabi.c (gdbarch_register_osabi): Likewise.
(gdbarch_register_osabi_sniffer): Likewise.
* parse.c (start_arglist): Likewise.
* ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
(hwdebug_insert_point): Likewise.
* printcmd.c (display_command): Likewise.
(ui_printf): Likewise.
* procfs.c (create_procinfo): Likewise.
(load_syscalls): Likewise.
(proc_get_LDT_entry): Likewise.
(proc_update_threads): Likewise.
* prologue-value.c (make_pv_area): Likewise.
(pv_area_store): Likewise.
* psymtab.c (extend_psymbol_list): Likewise.
(init_psymbol_list): Likewise.
(allocate_psymtab): Likewise.
* python/py-inferior.c (add_thread_object): Likewise.
* python/py-param.c (compute_enum_values): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/py-varobj.c (py_varobj_iter_next): Likewise.
* python/python.c (ensure_python_env): Likewise.
* record-btrace.c (record_btrace_start_replaying): Likewise.
* record-full.c (record_full_reg_alloc): Likewise.
(record_full_mem_alloc): Likewise.
(record_full_end_alloc): Likewise.
(record_full_core_xfer_partial): Likewise.
* regcache.c (get_thread_arch_aspace_regcache): Likewise.
* remote-fileio.c (remote_fileio_init_fd_map): Likewise.
* remote-notif.c (remote_notif_state_allocate): Likewise.
* remote.c (demand_private_info): Likewise.
(remote_notif_stop_alloc_reply): Likewise.
(remote_enable_btrace): Likewise.
* reverse.c (save_bookmark_command): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
* rx-tdep.c (rx_gdbarch_init): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
* ser-go32.c (dos_get_tty_state): Likewise.
(dos_copy_tty_state): Likewise.
* ser-mingw.c (ser_windows_open): Likewise.
(ser_console_wait_handle): Likewise.
(ser_console_get_tty_state): Likewise.
(make_pipe_state): Likewise.
(net_windows_open): Likewise.
* ser-unix.c (hardwire_get_tty_state): Likewise.
(hardwire_copy_tty_state): Likewise.
* solib-aix.c (solib_aix_new_lm_info): Likewise.
* solib-dsbt.c (dsbt_current_sos): Likewise.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
(frv_relocate_main_executable): Likewise.
* solib-spu.c (spu_bfd_fopen): Likewise.
* solib-svr4.c (lm_info_read): Likewise.
(svr4_copy_library_list): Likewise.
(svr4_default_sos): Likewise.
* source.c (find_source_lines): Likewise.
(line_info): Likewise.
(add_substitute_path_rule): Likewise.
* spu-linux-nat.c (spu_bfd_open): Likewise.
* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
* stabsread.c (dbx_lookup_type): Likewise.
(read_type): Likewise.
(read_member_functions): Likewise.
(read_struct_fields): Likewise.
(read_baseclasses): Likewise.
(read_args): Likewise.
(_initialize_stabsread): Likewise.
* stack.c (func_command): Likewise.
* stap-probe.c (handle_stap_probe): Likewise.
* symfile.c (addrs_section_sort): Likewise.
(addr_info_make_relative): Likewise.
(load_section_callback): Likewise.
(add_symbol_file_command): Likewise.
(init_filename_language_table): Likewise.
* symtab.c (create_filename_seen_cache): Likewise.
(sort_search_symbols_remove_dups): Likewise.
(search_symbols): Likewise.
* target.c (make_cleanup_restore_target_terminal): Likewise.
* thread.c (new_thread): Likewise.
(enable_thread_stack_temporaries): Likewise.
(make_cleanup_restore_current_thread): Likewise.
(thread_apply_all_command): Likewise.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* top.c (gdb_readline_wrapper): Likewise.
* tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
* tracepoint.c (trace_find_line_command): Likewise.
(all_tracepoint_actions_and_cleanup): Likewise.
(make_cleanup_restore_current_traceframe): Likewise.
(get_uploaded_tp): Likewise.
(get_uploaded_tsv): Likewise.
* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
(tui_alloc_win_info): Likewise.
(tui_alloc_content): Likewise.
(tui_add_content_elements): Likewise.
* tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
(tui_set_disassem_content): Likewise.
* ui-file.c (ui_file_new): Likewise.
(stdio_file_new): Likewise.
(tee_file_new): Likewise.
* utils.c (make_cleanup_restore_integer): Likewise.
(add_internal_problem_command): Likewise.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* valops.c (find_oload_champ): Likewise.
* value.c (allocate_value_lazy): Likewise.
(record_latest_value): Likewise.
(create_internalvar): Likewise.
* varobj.c (install_variable): Likewise.
(new_variable): Likewise.
(new_root_variable): Likewise.
(cppush): Likewise.
(_initialize_varobj): Likewise.
* windows-nat.c (windows_make_so): Likewise.
* x86-nat.c (x86_add_process): Likewise.
* xcoffread.c (arrange_linetable): Likewise.
(allocate_include_entry): Likewise.
(process_linenos): Likewise.
(SYMBOL_DUP): Likewise.
(xcoff_start_psymtab): Likewise.
(xcoff_end_psymtab): Likewise.
* xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/gdbserver/ChangeLog:
* ax.c (gdb_parse_agent_expr): Likewise.
(compile_bytecodes): Likewise.
* dll.c (loaded_dll): Likewise.
* event-loop.c (append_callback_event): Likewise.
(create_file_handler): Likewise.
(create_file_event): Likewise.
* hostio.c (handle_open): Likewise.
* inferiors.c (add_thread): Likewise.
(add_process): Likewise.
* linux-aarch64-low.c (aarch64_linux_new_process): Likewise.
* linux-arm-low.c (arm_new_process): Likewise.
(arm_new_thread): Likewise.
* linux-low.c (add_to_pid_list): Likewise.
(linux_add_process): Likewise.
(handle_extended_wait): Likewise.
(add_lwp): Likewise.
(enqueue_one_deferred_signal): Likewise.
(enqueue_pending_signal): Likewise.
(linux_resume_one_lwp_throw): Likewise.
(linux_resume_one_thread): Likewise.
(linux_read_memory): Likewise.
(linux_write_memory): Likewise.
* linux-mips-low.c (mips_linux_new_process): Likewise.
(mips_linux_new_thread): Likewise.
(mips_add_watchpoint): Likewise.
* linux-x86-low.c (initialize_low_arch): Likewise.
* lynx-low.c (lynx_add_process): Likewise.
* mem-break.c (set_raw_breakpoint_at): Likewise.
(set_breakpoint): Likewise.
(add_condition_to_breakpoint): Likewise.
(add_commands_to_breakpoint): Likewise.
(clone_agent_expr): Likewise.
(clone_one_breakpoint): Likewise.
* regcache.c (new_register_cache): Likewise.
* remote-utils.c (look_up_one_symbol): Likewise.
* server.c (queue_stop_reply): Likewise.
(start_inferior): Likewise.
(queue_stop_reply_callback): Likewise.
(handle_target_event): Likewise.
* spu-low.c (fetch_ppc_memory): Likewise.
(store_ppc_memory): Likewise.
* target.c (set_target_ops): Likewise.
* thread-db.c (thread_db_load_search): Likewise.
(try_thread_db_load_1): Likewise.
* tracepoint.c (add_tracepoint): Likewise.
(add_tracepoint_action): Likewise.
(create_trace_state_variable): Likewise.
(cmd_qtdpsrc): Likewise.
(cmd_qtro): Likewise.
(add_while_stepping_state): Likewise.
* win32-low.c (child_add_thread): Likewise.
(get_image_name): Likewise.
|
|
With "maint set target-non-stop on" we get:
@@ -66,13 +66,16 @@ Continuing.
interrupt
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
-Program received signal SIGINT, Interrupt.
-PASS: gdb.base/interrupt-noterm.exp: inferior received SIGINT
-testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 0 seconds
+[process 12119] #1 stopped.
+0x0000003615ebc6d0 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:81
+81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
+FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT (timeout)
+testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 10 seconds
That is, we get "[$thread] #1 stopped" instead of SIGINT.
The issue is that we don't currently distinguish send
"interrupt/ctrl-c" to target terminal vs "stop/pause" thread well;
both cases go through "target_stop".
And then, the native Linux backend (linux-nat.c) implements
target_stop with SIGSTOP in non-stop mode, and SIGINT in all-stop
mode. Since "maint set target-non-stop on" forces the backend to be
always running in non-stop mode, even though the user-visible behavior
is "set non-stop" is "off", "interrupt" causes a SIGSTOP instead of
the SIGINT the test expects.
Fix this by introducing a target_interrupt method to use in the
"interrupt/ctrl-c" case, so "set non-stop off" can always work the
same irrespective of "maint set target-non-stop on/off". I'm
explictly considering changing the "set non-stop on" behavior as out
of scope here.
Most of the patch is an across-the-board rename of to_stop hook
implementations to to_interrupt. The only targets where something
more than a rename is being done are linux-nat.c and remote.c, which
are the only targets that support async, and thus are the only ones
the core side calls target_stop on.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_stop): Rename to ...
(darwin_interrupt): ... this.
(_initialize_darwin_inferior): Adjust.
* gnu-nat.c (gnu_stop): Delete.
(gnu_target): Don't install gnu_stop.
* inf-ptrace.c (inf_ptrace_stop): Rename to ...
(inf_ptrace_interrupt): ... this.
(inf_ptrace_target): Adjust.
* infcmd.c (interrupt_target_1): Use target_interrupt instead of
target_stop.
* linux-nat (linux_nat_stop): Rename to ...
(linux_nat_interrupt): ... this.
(linux_nat_stop): Reimplement.
(linux_nat_add_target): Install linux_nat_interrupt.
* nto-procfs.c (nto_interrupt_twice): Rename to ...
(nto_handle_sigint_twice): ... this.
(nto_interrupt): Rename to ...
(nto_handle_sigint): ... this. Call target_interrupt instead of
target_stop.
(procfs_wait): Adjust.
(procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(init_procfs_targets): Adjust.
* procfs.c (procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(procfs_target): Adjust.
* remote-m32r-sdi.c (m32r_stop): Rename to ...
(m32r_interrupt): ... this.
(init_m32r_ops): Adjust.
* remote-sim.c (gdbsim_stop_inferior): Rename to ...
(gdbsim_interrupt_inferior): ... this.
(gdbsim_stop): Rename to ...
(gdbsim_interrupt): ... this.
(gdbsim_cntrl_c): Adjust.
(init_gdbsim_ops): Adjust.
* remote.c (sync_remote_interrupt): Adjust comments.
(remote_stop_as): Rename to ...
(remote_interrupt_as): ... this.
(remote_stop): Adjust comment.
(remote_interrupt): New function.
(init_remote_ops): Install remote_interrupt.
* target.c (target_interrupt): New function.
* target.h (struct target_ops) <to_interrupt>: New field.
(target_interrupt): New declaration.
* windows-nat.c (windows_stop): Rename to ...
(windows_interrupt): ... this.
* target-delegates.c: Regenerate.
|
|
This is a patch I extracted from Pedro's C++ branch. It contains the
most trivial enum fixes, where an integer type/value was used instead
of the appropriate enum type/value. It fixes many C++ errors, since
in C++ you can't mix integers and enums implicitely.
Regardless of the C++ conversion, I think this is a good cleanup to make
use of the appropriate enum types.
Regression-tested on native x86_64.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
type or value instead of integer.
(aarch64_linux_insert_watchpoint): Likewise.
(aarch64_linux_remove_watchpoint): Likewise.
* ada-lang.c (ada_op_print_tab): Likewise.
* amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
(amd64_linux_syscall_record_common): Likewise.
* arch-utils.c (target_byte_order_user): Likewise.
(default_byte_order): Likewise.
* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
(arm_linux_get_hwbp_type): Likewise.
(arm_linux_hw_watchpoint_initialize): Likewise.
(arm_linux_insert_watchpoint): Likewise.
* arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
(arm_linux_syscall_record): Likewise.
* breakpoint.c (update_watchpoint): Likewise.
(breakpoint_here_p): Likewise.
(bpstat_print): Likewise.
(enable_breakpoint_disp): Likewise.
* c-lang.c (c_op_print_tab): Likewise.
* cli/cli-decode.c (add_info_alias): Likewise.
* d-lang.c (d_op_print_tab): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* f-exp.y (dot_ops): Likewise.
(f77_keywords): Likewise.
* f-lang.c (f_op_print_tab): Likewise.
* go-lang.c (go_op_print_tab): Likewise.
* guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
* guile/scm-cmd.c (gdbscm_make_command): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
* guile/scm-string.c (struct scm_to_stringn_data): Likewise.
(struct scm_from_stringn_data): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_remove_watchpoint): Likewise.
(ia64_linux_can_use_hw_breakpoint): Likewise.
* infrun.c (print_stop_event): Likewise.
* jv-lang.c (java_op_print_tab): Likewise.
* linux-nat.c (linux_proc_xfer_partial): Likewise.
* linux-nat.h (struct lwp_info): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* m2-lang.c (m2_op_print_tab): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_variables): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* mi/mi-out.c (mi_table_begin): Likewise.
(mi_table_header): Likewise.
* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
(mips_linux_insert_watchpoint): Likewise.
(mips_linux_remove_watchpoint): Likewise.
* nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
* nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
(mips_linux_watch_type_to_irw): Likewise.
* nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_hw_watchpoint): Likewise.
(procfs_can_use_hw_breakpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
* p-lang.c (pascal_op_print_tab): Likewise.
* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
* ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
* procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_watchpoint): Likewise.
(procfs_remove_watchpoint): Likewise.
* psymtab.c (recursively_search_psymtabs): Likewise.
* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
(m32r_insert_watchpoint): Likewise.
* remote-mips.c (mips_can_use_watchpoint): Likewise.
(mips_insert_watchpoint): Likewise.
(mips_remove_watchpoint): Likewise.
* remote.c (watchpoint_to_Z_packet): Likewise.
(remote_insert_watchpoint): Likewise.
(remote_remove_watchpoint): Likewise.
(remote_check_watch_resources): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
(s390_can_use_hw_breakpoint): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
* target.h (struct target_ops): Likewise.
* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
* ui-out.c (struct ui_out_hdr): Likewise.
(append_header_to_list): Likewise.
(get_next_header): Likewise.
(verify_field): Likewise.
(ui_out_begin): Likewise.
(ui_out_field_int): Likewise.
(ui_out_field_fmt_int): Likewise.
(ui_out_field_skip): Likewise.
(ui_out_field_string): Likewise.
(ui_out_field_fmt): Likewise.
* varobj.c (new_variable): Likewise.
* x86-nat.c (x86_insert_watchpoint): Likewise.
(x86_remove_watchpoint): Likewise.
(x86_can_use_hw_breakpoint): Likewise.
* xtensa-tdep.h (struct gdbarch_tdep): Likewise.
* inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
previously anonymous enumeration type..
* linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
value.
* target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
(target_debug_print_enum_bptype): New.
* target-delegates.c: Regenerate.
|
