| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
../../gdb/nat/linux-namespaces.c: In function ‘void mnsh_main(int)’:
../../gdb/nat/linux-namespaces.c:604:8: warning: ‘fd’ may be used uninitialized in this function [-Wmaybe-uninitialized]
close (fd);
~~~~~~^~~~
And the warning is correct -- mnsh_recv_message can return -1 and leave fd
uninitialized, and mnsh_main will still call close (fd) if that happens.
Initialize fd to -1 to avoid that.
gdb/ChangeLog:
2019-08-27 Christian Biesinger <cbiesinger@google.com>
* nat/linux-namespaces.c (mnsh_main): Initialize fd (to -1).
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
The debugging code in linux-waitpid.c is one of the few remaining
spots that depends on the gdb/gdbserver difference.
My first thought was that this code is not extremely useful, so this
patch removes this code. (However, if it is actually useful to
someone, we could make it work by introducing a new abstraction.)
gdb/ChangeLog
2019-06-11 Tom Tromey <tom@tromey.com>
* nat/linux-waitpid.c: Don't include server.h.
(linux_debug): Remove.
(my_waitpid): Update.
|
|
ARI pointed out that a recent patch introduced a call to "warning"
with a string that ended in a newline:
https://sourceware.org/ml/gdb-patches/2019-06/msg00000.html
This is generally forbidden, I believe, because warning adds its own
newline.
This patch removes all of the trailing newlines I was able to find. I
searched for 'warning (.*\\n"' and then fixed the ones where the
newline appeared at the end of the string (some had internal
newlines).
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* m32c-tdep.c (m32c_m16c_address_to_pointer): Don't end warning
with a newline.
* guile/guile.c (handle_boot_error): Don't end warning with a
newline.
* cli/cli-cmds.c (exit_status_set_internal_vars): Don't end
warning with a newline.
* s12z-tdep.c (s12z_skip_prologue): Don't end warning with a
newline.
(s12z_frame_cache): Likewise.
* dwarf-index-cache.c (index_cache::store): Don't end warning with
a newline.
* solib-svr4.c (disable_probes_interface): Don't end warning with
a newline.
* nat/fork-inferior.c (fork_inferior): Don't end warning with a
newline.
* python/python.c (do_finish_initialization): Don't end warning
with a newline.
gdb/gdbserver/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* remote-utils.c (look_up_one_symbol, relocate_instruction): Don't
end warning with a newline.
* linux-s390-low.c (s390_get_wordsize): Don't end warning with a
newline.
* thread-db.c (attach_thread): Don't end warning with a newline.
(thread_db_notice_clone): Likewise.
* tracepoint.c (gdb_agent_helper_thread): Don't end warning with a
newline.
* linux-x86-low.c (x86_get_min_fast_tracepoint_insn_len): Don't
end warning with a newline.
|
|
All debug output needs to go via debug functions to ensure it writes to the
correct output stream.
gdb/ChangeLog:
* nat/linux-waitpid.c (linux_debug): Call debug_vprintf.
gdb/gdbserver/ChangeLog:
* ax.c (ax_vdebug): Call debug_printf.
* debug.c (debug_write): New function.
* debug.h (debug_write): New declaration.
* linux-low.c (sigchld_handler): Call debug_write.
|
|
When writing registers to the kernel, check if regcache VG has been changed. If
so then update the thread's vector length, then write back the registers.
When reading registers from the kernel, ensure regcache VG register is updated.
The regcache registers should already be of the correct length.
Remove all the checks that error if the vector length has changed.
gdb/ChangeLog:
* aarch64-linux-nat.c (store_sveregs_to_thread): Set vector length.
* nat/aarch64-sve-linux-ptrace.c (aarch64_sve_set_vq): New function.
(aarch64_sve_regs_copy_to_reg_buf): Remove VG checks.
(aarch64_sve_regs_copy_from_reg_buf): Likewise.
* nat/aarch64-sve-linux-ptrace.h (aarch64_sve_set_vq): New declaration.
|
|
This changes iterate_over_lwps to use a gdb::function_view. This was
needed in order to make null_ptid and minus_one_ptid 'const'.
gdb/ChangeLog
2019-03-12 Tom Tromey <tromey@adacore.com>
* linux-nat.c (iterate_over_lwps): Update.
(stop_callback): Remove parameter.
(stop_wait_callback, detach_callback, resume_set_callback)
(select_singlestep_lwp_callback, set_ignore_sigint)
(status_callback, resumed_callback, resume_clear_callback)
(kill_callback, kill_wait_callback, linux_nat_stop_lwp): Remove
data parameter.
(linux_nat_target::detach, linux_nat_target::resume)
(linux_stop_and_wait_all_lwps, select_event_lwp)
(linux_nat_filter_event, linux_nat_wait_1)
(linux_nat_target::kill, linux_nat_target::stop)
(linux_nat_target::stop): Update.
(linux_nat_resume_callback): Change type.
(resume_stopped_resumed_lwps, count_events_callback)
(select_event_lwp_callback): Likewise.
(linux_stop_lwp, linux_nat_stop_lwp): Update.
* arm-linux-nat.c (struct update_registers_data): Remove.
(update_registers_callback): Change type.
(arm_linux_insert_hw_breakpoint1): Update.
* nat/x86-linux-dregs.c (update_debug_registers_callback): Remove
parameter.
(x86_linux_dr_set_addr): Update.
(x86_linux_dr_set_control): Update.
* nat/linux-nat.h (iterate_over_lwps_ftype): Remove parameter.
(iterate_over_lwps): Use gdb::function_view.
* nat/aarch64-linux-hw-point.c (struct
aarch64_dr_update_callback_param): Remove.
(debug_reg_change_callback): Change type.
(aarch64_notify_debug_reg_change): Update.
* s390-linux-nat.c (s390_refresh_per_info): Update.
gdb/gdbserver/ChangeLog
2019-03-12 Tom Tromey <tromey@adacore.com>
* linux-low.c (iterate_over_lwps): Update.
|
|
This removes the last cleanup from linux-namespaces.c, replacing it
with a use of SCOPE_EXIT.
2019-03-06 Tom Tromey <tom@tromey.com>
* nat/linux-namespaces.c (linux_mntns_access_fs): Use SCOPE_EXIT.
* common/filestuff.h (make_cleanup_close): Don't declare.
* common/filestuff.c (do_close_cleanup, make_cleanup_close):
Remove.
|
|
This applies ATTRIBUTE_UNUSED_RESULT to scoped_mmap::release and fixes
a couple of spots to comply.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* nat/linux-btrace.c (linux_enable_bts, linux_enable_pt): Update.
* common/scoped_mmap.h (class scoped_mmap) <release>: Add
ATTRIBUTE_UNUSED_RESULT.
|
|
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
The code to not set empty hardware BPs/WPs on new threads will only work
if the newly allocated struct is empty.
Ensure the structure is created zeroed.
This patch removes the remaining racy behaviour on gdb.threads tests
when run on AArch64 Ubuntu.
gdb/ChangeLog:
* nat/aarch64-linux.c (aarch64_linux_new_thread): Replace XNEW
with XCNEW.
|
|
This replaces "the the" with "the" in various comments.
Tested by rebuilding. This didn't test the solib-dsbt.c change, but
it looks harmless.
gdb/ChangeLog
2019-01-17 Tom Tromey <tromey@bapiya>
* valprint.c: Replace "the the" with "the".
* symtab.c: Replace "the the" with "the".
* solib.c: Replace "the the" with "the".
* solib-dsbt.c: Replace "the the" with "the".
* linespec.c: Replace "the the" with "the".
* dwarf2loc.h: Replace "the the" with "the".
* amd64-windows-tdep.c: Replace "the the" with "the".
* aarch64-tdep.c: Replace "the the" with "the".
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
A recent patch [1] to fix a GCC PR [2] actually broke the GDB build.
To fix, remove the stack pointer clobber. GCC will ignore the clobber
marker, and will not save or restore the stack pointer.
I ran "make check-gdb" on x86_64 to ensure there are no regressions.
gdb/ChangeLog:
2018-12-17 Dimitar Dimitrov <dimitar@dinux.eu>
* nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Remove sp clobbers.
[1] https://gcc.gnu.org/ml/gcc-patches/2018-12/msg00532.html
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52813
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
|
|
Including asm/sigcontext.h together with libc headers is not valid. In
general linux headers may not work with libc headers, so mixing them
should be avoided, especially when the linux header defines types that
are also exposed in libc headers.
In case of asm/sigcontext.h glibc happens to work because glibc signal.h
directly includes it, but e.g. in musl libc signal.h replicates the
sigcontext.h definitions in an abi compatible way which are in conflict
with the linux definitions when both headers are included.
Since old linux headers or old libc headers may not have the necessary
definitions, gdb has to replicate the definitions it relies on anyway.
Which is fine since all definitions must be ABI stable. For linux apis
that are not available via libc headers, replicating the definitions in
gdb is the most reliable way to use them.
Note: asm/ptrace.h includes asm/sigcontext.h in some versions of linux
headers, which is just as problematic and should be fixed in linux.
gdb/ChangeLog:
* nat/aarch64-sve-linux-ptrace.h: Include signal.h instead of
asm/sigcontext.h.
|
|
2018-12-17 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* nat/linux-ptrace.c (kill_child): Fix ARI warning by removing
warning trailing new line.
|
|
Running the gdb testsuite under Valgrind started to fail after 100+ tests,
due to out of memory caused by lingering processes.
The lingering processes are caused by the combination
of a limitation in Valgrind signal handling when using PTRACE_TRACEME
and a (minor) bug in GDB.
The Valgrind limitation is : when a process is ptraced and raises
a signal, Valgrind will replace the raised signal by SIGSTOP as other
signals are masked by Valgrind when executing a system call.
Removing this limitation seems far to be trivial, valgrind signal
handling is very complex.
Due to this valgrind limitation, GDB linux_ptrace_test_ret_to_nx gets
a SIGSTOP signal instead of the expected SIGTRAP or SIGSEGV.
In such a case, linux_ptrace_test_ret_to_nx does an early return, but
does not kill the child (running under valgrind), child stays in a STOP-ped
state.
These lingering processes then eat the available system memory,
till launching a new process starts to fail.
This patch fixes the GDB minor bug by killing the child in case
linux_ptrace_test_ret_to_nx does an early return.
nat/linux-ptrace.c has 3 different logics to kill a child process.
So, this patch factorizes killing a child in the function kill_child.
The 3 different logics are:
* linux_ptrace_test_ret_to_nx is calling both kill (child, SIGKILL)
and ptrace (PTRACE_KILL, child, ...), and then is calling once
waitpid.
* linux_check_ptrace_features is calling ptrace (PTRACE_KILL, child, ...)
+ my_waitpid in a loop, as long as the waitpid status was WIFSTOPPED.
* linux_test_for_tracefork is calling once ptrace (PTRACE_KILL, child, ...)
+ my_waitpid.
The linux ptrace documentation indicates that PTRACE_KILL is deprecated,
and tells to not use it, as it might return success but not kill the tracee.
The documentation indicates to send SIGKILL directly.
I suspect that linux_ptrace_test_ret_to_nx calls both kill and ptrace just
to be sure ...
I suspect that linux_check_ptrace_features calls ptrace in a loop
to bypass the PTRACE_KILL limitation.
And it looks like linux_test_for_tracefork does not handle the PTRACE_KILL
limitation.
Also, 2 of the 3 logics are calling my_waitpid, which seems better,
as this is protecting the waitpid syscall against EINTR.
So, the logic in kill_child is just using kill (child, SIGKILL)
+ my_waitpid, and then does a few verifications to see everything worked
accordingly to the plan.
Tested on Debian/x86_64.
2018-12-16 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* nat/linux-ptrace.c (kill_child): New function.
(linux_ptrace_test_ret_to_nx): Use kill_child instead of local code.
Add a call to kill_child in case of early return after fork.
(linux_check_ptrace_features): Use kill_child instead of local code.
(linux_test_for_tracefork): Likewise.
|
|
ARI warning.
2018-12-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* nat/linux-osdata.c (linux_xfer_osdata_info_os_types): Forward
declare on one line to fix ARI warning.
|
|
Valgrind reports leaks in all linux osdata annex transfers of linux-osdata.c.
A typical leak (this one is of gdb.base/info-os) is:
==10592== VALGRIND_GDB_ERROR_BEGIN
==10592== 65,536 bytes in 1 blocks are definitely lost in loss record 3,175 of 3,208
==10592== at 0x4C2E273: realloc (vg_replace_malloc.c:826)
==10592== by 0x409B0C: xrealloc (common-utils.c:62)
==10592== by 0x408BC3: buffer_grow(buffer*, char const*, unsigned long) [clone .part.1] (buffer.c:40)
==10592== by 0x5263DF: linux_xfer_osdata_processes(unsigned char*, unsigned long, unsigned long) (linux-osdata.c:370)
==10592== by 0x520875: linux_nat_xfer_osdata (linux-nat.c:4214)
...
The leaks are created because the linux_xfer_osdata_* functions
transfer the ownership of their 'static struct buffer' memory
to their 'static char *buf' local var, but then call buffer_free
instead of xfree-ing buf.
I see no reason why the ownership of the memory has to be transferred
from a local var to another local var, so the fix consists in dropping
the 'static char *buf' and accessing the struct buffer memory where needed.
Also, because this bug was replicated in all functions, and there was
a non neglectible amount of duplicated code, the setup and usage
of the 'static struct buffer' is factorized in a new function
common_getter. The buffer for a specific annex is now a member
of the struct osdata_type instead of being a static var of each
linux_xfer_osdata_* function.
Thanks to this, all the linux_xfer_osdata_* do not have
anymore any logic related to the partial transfer of data: they now
only build the xml data in a struct buffer.
This all removes about 300 SLOC.
Note: git diff/git format-patch shows a lot of differences only due
to space changes/indentation changes.
So, git diff -w helps to look only at the relevant differences.
gdb/ChangeLog
2018-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* nat/linux-osdata.c (common_getter): New function.
(struct osdata_type): Change getter to take_snapshot.
Add LONGEST len_avail and struct buffer buffer.
Change all elements in the initializer.
Add an element for the list of types.
(linux_xfer_osdata_info_os_types): New function.
(linux_common_xfer_osdata): Use common_getter for the list of types.
Replace getter call by common_getter.
(linux_xfer_osdata_cpus): Remove args READBUF, OFFSET, LEN.
Add arg BUFFER. Only keep the code that adds data in BUFFER.
(linux_xfer_osdata_fds): Likewise.
(linux_xfer_osdata_modules): Likewise.
(linux_xfer_osdata_msg): Likewise.
(linux_xfer_osdata_processes): Likewise.
(linux_xfer_osdata_processgroups): Likewise.
(linux_xfer_osdata_sem): Likewise.
(linux_xfer_osdata_shm): Likewise.
(linux_xfer_osdata_isockets): Likewise.
(linux_xfer_osdata_threads): Likewise.
|
|
|
|
internal process handle.
Valgrind reports the below leak:
==25327== VALGRIND_GDB_ERROR_BEGIN
==25327== 672 bytes in 1 blocks are definitely lost in loss record 2,759 of 3,251
==25327== at 0x4C2E07C: calloc (vg_replace_malloc.c:752)
==25327== by 0x7FDCB3E: ???
==25327== by 0x532A7A: try_thread_db_load_1 (linux-thread-db.c:828)
==25327== by 0x532A7A: try_thread_db_load(char const*, int) (linux-thread-db.c:997)
==25327== by 0x53354D: try_thread_db_load_from_sdir (linux-thread-db.c:1074)
==25327== by 0x53354D: thread_db_load_search (linux-thread-db.c:1129)
==25327== by 0x53354D: thread_db_load() (linux-thread-db.c:1187)
==25327== by 0x611AF1: operator() (functional:2127)
==25327== by 0x611AF1: notify (observable.h:106)
==25327== by 0x611AF1: symbol_file_add_with_addrs(bfd*, char const*, enum_flags<symfile_add_flag>, std::vector<other_sections, std::allocator<other_sections> >*, enum_flags<objfile_flag>, objfile*) (symfile.c:1158)
==25327== by 0x5F5C4A: solib_read_symbols(so_list*, enum_flags<symfile_add_flag>) (solib.c:691)
==25327== by 0x5F6A8B: solib_add(char const*, int, int) (solib.c:1003)
==25327== by 0x5F6BF7: handle_solib_event() (solib.c:1281)
==25327== by 0x3D0A94: bpstat_stop_status(address_space const*, unsigned long, thread_info*, target_waitstatus const*, bpstats*) (breakpoint.c:5417)
==25327== by 0x4FF133: handle_signal_stop(execution_control_state*) (infrun.c:5874)
==25327== by 0x502C29: handle_inferior_event_1 (infrun.c:5300)
==25327== by 0x502C29: handle_inferior_event(execution_control_state*) (infrun.c:5335)
==25327== by 0x5041DB: fetch_inferior_event(void*) (infrun.c:3868)
==25327== by 0x4A1E7C: gdb_wait_for_event(int) (event-loop.c:859)
...
This leak is created because a call to td_ta_new allocates some resources
that must be freed with td_ta_delete, and that was missing.
With this patch, the nr of GDB executions leaking during regression tests
decreases further from 566 to 380.
Note that the gdbserver equivalent code is properly calling
td_ta_delete: see thread_db_mourn in thread-db.c.
Tests run natively on debian/amd64, and run under valgrind.
gdb/ChangeLog
2018-12-08 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* linux-thread-db.c (struct thread_db_info): Add td_ta_delete_p.
(thread_db_err_str): Forward declare.
(delete_thread_db_info): Call td_ta_delete_p if available.
(try_thread_db_load_1): Acquire td_ta_delete address.
* nat/gdb_thread_db.h (td_ta_delete_ftype): Declare.
|
|
On some heavily loaded AArch64 boxes, GDB will sometimes hang forever when
the inferior creates a thread. This hang happens inside the kernel during
the ptrace call to set hardware watchpoints or hardware breakpoints.
Currently, GDB will always set hw wp/bp at the start of each thread even if
there are none set in the process.
This patch works around the issue by avoiding setting hw wp/bp if there
are none set for the process.
On an effected machine, this fix drastically reduces the racy nature of the
gdb.threads test set. I ran the entire gdb test suite across all processors
for 100 iterations, then ran the results through the racy tests script.
Without the patch, 58 .exp files in gdb.threads were marked as racy. After
the patch this reduced to the same ~14 tests as the non effected boxes.
Clearly GDB will still be subject to hangs on an effect box if hw wp/bp's are
used prior to creating inferior threads on a heavily loaded system.
To enable this in gdbserver, the sequence in gdbserver add_lwp() is switched
to the same as gdb order as gdb, to ensure the thread is registered before
calling new_thread(). This allows aarch64_linux_new_thread() to read the
ptid.
gdb/ChangeLog:
* nat/aarch64-linux-hw-point.c
(aarch64_linux_any_set_debug_regs_state): New function.
* nat/aarch64-linux-hw-point.h
(aarch64_linux_any_set_debug_regs_state): New declaration.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Check if any
BPs or WPs are set.
gdb/gdbserver/ChangeLog:
* linux-low.c (add_lwp): Switch ordering.
|
|
I noticed several places in gdb that were using getenv("SHELL") and
then falling back to "/bin/sh" if it returned NULL. This unifies
these into a single function.
gdb/ChangeLog
2018-10-27 Tom Tromey <tom@tromey.com>
* procfs.c (procfs_target::create_inferior): Use get_shell.
* cli/cli-cmds.c (shell_escape): Use get_shell.
* windows-nat.c (windows_nat_target::create_inferior): Use
get_shell.
* common/pathstuff.c (get_shell): New function.
* nat/fork-inferior.c (SHELL_FILE, get_startup_shell): Remove.
(fork_inferior): Use get_shell.
* common/pathstuff.h (get_shell): Declare.
|
|
This patch adds support for Hardware Transactional Memory registers
for the powerpc linux native and core file targets, and for the
pwoerpc linux server stub.
These registers include both the HTM special-purpose registers (TFHAR,
TEXASR and TFIAR) as well as the set of registers that are
checkpointed (saved) when a transaction is initiated, which the
processor restores in the event of a transaction failure.
The set of checkpointed general-purpose registers is returned by the
linux kernel in the same format as the regular general-purpose
registers, defined in struct pt_regs. However, the architecture
specifies that only some of the registers present in pt_regs are
checkpointed (GPRs 0-31, CR, XER, LR and CTR). The kernel fills the
slots for MSR and NIP with other info. The other fields usually don't
have meaningful values. GDB doesn't define registers that are not
checkpointed in the architecture, but when generating a core file, GDB
fills the slot for the checkpointed MSR with the regular MSR. These
are usually similar, although some bits might be different, and in
some cases the checkpointed MSR will have a value of 0 in a
kernel-generated core-file. The checkpointed NIP is filled with TFHAR
by GDB in the core-file, which is what the kernel does. The other
fields are set to 0 by GDB.
Core files generated by the kernel have a note section for
checkpointed GPRs with the same size for both 32-bit and 64-bit
threads, and the values for the registers of a 32-bit thread are
squeezed in the first half, with no useful data in the second half.
GDB generates a smaller note section for 32-bit threads, but can read
both sizes.
The checkpointed XER is required to be 32-bit in the target
description documentation, even though the more recent ISAs define it
as 64-bit wide, since the high-order 32-bits are reserved, and because
in Linux there is no way to get a 64-bit checkpointed XER for 32-bit
threads. If this changes in the future, the target description
feature requirement can be relaxed to allow for a 64-bit checkpointed
XER.
Access to the checkpointed CR (condition register) can be confusing.
The architecture only specifies that CR fields 1 to 7 (the 24 least
significant bits) are checkpointed, but the kernel provides all 8
fields (32 bits). The value of field 0 is not masked by ptrace, so it
will sometimes show the result of some kernel operation, probably
treclaim., which sets this field.
The checkpointed registers are marked not to be saved and restored.
Inferior function calls during an active transaction don't work well,
and it's unclear what should be done in this case. TEXASR and TFIAR
can be altered asynchronously, during transaction failure recording,
so they are also not saved and restored. For consistency neither is
TFHAR.
Record and replay also doesn't work well when transactions are
involved. This patch doesn't address this, so the values of the HTM
SPRs will sometimes be innacurate when the record/relay target is
enabled. For instance, executing a "tbegin." alters TFHAR and TEXASR,
but these changes are not currently recorded.
Because the checkpointed registers are only available when a
transaction is active (or suspended), ptrace can return ENODATA when
gdb tries to read these registers and the inferior is not in a
transactional state. The registers are set to the unavailable state
when this happens. When gbd tries to write to one of these registers,
and it is unavailable, an error is raised.
The "fill" functions for checkpointed register sets in the server stub
are not implemented for the same reason as for the EBB register set,
since ptrace can also return ENODATA for checkpointed regsets. The
same issues with 'G' packets apply here.
Just like for the EBB registers, tracepoints will not mark the
checkpointed registers as unavailable if the inferior was not in a
transaction, so their content will also show 0 instead of
<unavailable> when inspecting trace data.
The new tests record the values of the regular registers before
stepping the inferior through a "tbegin." instruction to start a
transaction, then the checkpointed registers are checked against the
recorded pre-transactional values. New values are written to the
checkpointed registers and recorded, the inferior continues until the
transaction aborts (which is usually immediately when it is resumed),
and the regular registers are checked against the recorded values,
because the abort should have reverted the registers to these values.
Like for the EBB registers, target_store_registers will ignore the
checkpointed registers when called with -1 as the regno
argument (store all registers in one go).
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_htm_vsx32l)
(tdesc_powerpc_isa207_htm_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TM_SPRREGSET)
(PPC32_LINUX_SIZEOF_CGPRREGSET, PPC64_LINUX_SIZEOF_CGPRREGSET)
(PPC_LINUX_SIZEOF_CFPRREGSET, PPC_LINUX_SIZEOF_CVMXREGSET)
(PPC_LINUX_SIZEOF_CVSXREGSET, PPC_LINUX_SIZEOF_CPPRREGSET)
(PPC_LINUX_SIZEOF_CDSCRREGSET, PPC_LINUX_SIZEOF_CTARREGSET):
Define.
(struct ppc_linux_features) <htm>: New field.
(ppc_linux_no_features): Add initializer for htm field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_HTM, NT_PPC_TM_CGPR)
(NT_PPC_TM_CFPR, NT_PPC_TM_CVMX, NT_PPC_TM_CVSX)
(NT_PPC_TM_SPR, NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR):
Define if not already defined.
* features/Makefile (WHICH): Add rs6000/powerpc-isa207-htm-vsx32l
and rs6000/powerpc-isa207-htm-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa207-htm-vsx32l.xml and
rs6000/powerpc-isa207-htm-vsx64l.xml.
* features/rs6000/power-htm-spr.xml: New file.
* features/rs6000/power-htm-core.xml: New file.
* features/rs6000/power64-htm-core.xml: New file.
* features/rs6000/power-htm-fpu.xml: New file.
* features/rs6000/power-htm-altivec.xml: New file.
* features/rs6000/power-htm-vsx.xml: New file.
* features/rs6000/power-htm-ppr.xml: New file.
* features/rs6000/power-htm-dscr.xml: New file.
* features/rs6000/power-htm-tar.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx32l.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx64l.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx32l.c: Generate.
* features/rs6000/powerpc-isa207-htm-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa207-htm-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa207-htm-vsx64l.dat: Generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with HTM regsets.
(store_register, store_ppc_registers): Call store_regset with HTM
regsets.
(ppc_linux_nat_target::read_description): Set htm field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa207-htm-vsx32l.c and
features/rs6000/powerpc-isa207-htm-vsx64l.c.
(ppc32_regmap_tm_spr, ppc32_regmap_cgpr, ppc64_le_regmap_cgpr)
(ppc64_be_regmap_cgpr, ppc32_regmap_cfpr, ppc32_le_regmap_cvmx)
(ppc32_be_regmap_cvmx, ppc32_regmap_cvsx, ppc32_regmap_cppr)
(ppc32_regmap_cdscr, ppc32_regmap_ctar): New globals.
(ppc32_linux_tm_sprregset, ppc32_linux_cgprregset)
(ppc64_be_linux_cgprregset, ppc64_le_linux_cgprregset)
(ppc32_linux_cfprregset, ppc32_le_linux_cvmxregset)
(ppc32_be_linux_cvmxregset, ppc32_linux_cvsxregset)
(ppc32_linux_cpprregset, ppc32_linux_cdscrregset)
(ppc32_linux_ctarregset): New globals.
(ppc_linux_cgprregset, ppc_linux_cvmxregset): New functions.
(ppc_linux_collect_core_cpgrregset): New function.
(ppc_linux_iterate_over_regset_sections): Call back with the htm
regsets.
(ppc_linux_core_read_description): Check if the tm spr section is
present and set htm in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa207_htm_vsx32l and
initialize_tdesc_powerpc_isa207_htm_vsx64l.
* ppc-linux-tdep.h (ppc_linux_cgprregset, ppc_linux_cvmxregset):
Declare.
(ppc32_linux_tm_sprregset, ppc32_linux_cfprregset)
(ppc32_linux_cvsxregset, ppc32_linux_cpprregset)
(ppc32_linux_cdscrregset, ppc32_linux_ctarregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <have_htm_spr, have_htm_core>:
New fields.
<have_htm_fpu, have_htm_altivec, have_htm_vsx>:
Likewise.
<ppc_cppr_regnum, ppc_cdscr_regnum, ppc_ctar_regnum>: Likewise.
<ppc_cdl0_regnum, ppc_cvsr0_regnum, ppc_cefpr0_regnum>: Likewise.
(enum) <PPC_TFHAR_REGNUM, PPC_TEXASR_REGNUM, PPC_TFIAR_REGNUM>:
New enum fields.
<PPC_CR0_REGNUM, PPC_CCR_REGNUM, PPC_CXER_REGNUM>: Likewise.
<PPC_CLR_REGNUM, PPC_CCTR_REGNUM, PPC_CF0_REGNUM>: Likewise.
<PPC_CFPSCR_REGNUM, PPC_CVR0_REGNUM, PPC_CVSCR_REGNUM>: Likewise.
<PPC_CVRSAVE_REGNUM, PPC_CVSR0_UPPER_REGNUM>: Likewise.
<PPC_CPPR_REGNUM, PPC_CDSCR_REGNUM>: Likewise.
<PPC_CTAR_REGNUM>: Likewise.
(PPC_IS_TMSPR_REGNUM, PPC_IS_CKPTGP_REGNUM, PPC_IS_CKPTFP_REGNUM)
(PPC_IS_CKPTVMX_REGNUM, PPC_IS_CKPTVSX_REGNUM): Define.
* rs6000-tdep.c (IS_CDFP_PSEUDOREG, IS_CVSX_PSEUDOREG)
(IS_CEFP_PSEUDOREG): Define.
(rs6000_register_name): Hide the upper halves of checkpointed VSX
registers. Return names for the checkpointed DFP, VSX, and EFP
pseudo registers.
(rs6000_pseudo_register_type): Remove initial assert and raise an
internal error in the else clause instead. Return types for the
checkpointed DFP, VSX, and EFP pseudo registers.
(dfp_pseudo_register_read, dfp_pseudo_register_write): Handle
checkpointed DFP pseudo registers.
(vsx_pseudo_register_read, vsx_pseudo_register_write): Handle
checkpointed VSX pseudo registers.
(efp_pseudo_register_read, efp_pseudo_register_write): Rename
from efpr_pseudo_register_read and
efpr_pseudo_register_write. Handle checkpointed EFP pseudo
registers.
(rs6000_pseudo_register_read, rs6000_pseudo_register_write):
Handle checkpointed DFP, VSX, and EFP registers.
(dfp_ax_pseudo_register_collect, vsx_ax_pseudo_register_collect)
(efp_ax_pseudo_register_collect): New functions.
(rs6000_ax_pseudo_register_collect): Move DFP, VSX and EFP pseudo
register logic to new functions. Handle checkpointed DFP, VSX,
and EFP pseudo registers.
(rs6000_gdbarch_init): Look for and validate the htm features.
Include checkpointed DFP, VSX and EFP pseudo-registers.
* NEWS: Mention access to PPR, DSCR, TAR, EBB/PMU registers and
HTM registers.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa207-htm-vsx32l-ipa.o and
powerpc-isa207-htm-vsx64l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa207-htm-vsx32l.o and
powerpc-isa207-htm-vsx64l.o to srv_regobj. Add
rs6000/power-htm-spr.xml, rs6000/power-htm-core.xml,
rs6000/power64-htm-core.xml, rs6000/power-htm-fpu.xml,
rs6000/power-htm-altivec.xml, rs6000/power-htm-vsx.xml,
rs6000/power-htm-ppr.xml, rs6000/power-htm-dscr.xml,
rs6000/power-htm-tar.xml, rs6000/powerpc-isa207-htm-vsx32l.xml,
and rs6000/powerpc-isa207-htm-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA207_HTM_VSX>: New enum value.
(init_registers_powerpc_isa207_htm_vsx32l)
(init_registers_powerpc_isa207_htm_vsx64l): Declare.
* linux-ppc-low.c (ppc_fill_tm_sprregset, ppc_store_tm_sprregset)
(ppc_store_tm_cgprregset, ppc_store_tm_cfprregset)
(ppc_store_tm_cvrregset, ppc_store_tm_cvsxregset)
(ppc_store_tm_cpprregset, ppc_store_tm_cdscrregset)
(ppc_store_tm_ctarregset): New functions.
(ppc_regsets): Add entries for HTM regsets.
(ppc_arch_setup): Set htm in features struct when needed. Set
sizes for the HTM regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA207_HTM_VSX.
(initialize_low_arch): Call
init_registers_powerpc_isa207_htm_vsx32l and
init_registers_powerpc_isa207_htm_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle
PPC_TDESC_ISA207_HTM_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa207_htm_vsx32l and
init_registers_powerpc_isa207_htm_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-htm-regs.c: New file.
* gdb.arch/powerpc-htm-regs.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.htm.spr", "org.gnu.gdb.power.htm.core",
"org.gnu.gdb.power.htm.fpu", "org.gnu.gdb.power.htm.altivec",
"org.gnu.gdb.power.htm.vsx", "org.gnu.gdb.power.htm.ppr",
"org.gnu.gdb.power.htm.dscr", "org.gnu.gdb.power.htm.tar".
|
|
This patch adds support for registers of the Event Based Branching and
Performance Monitoring Units for the powerpc linux native and core
file targets, and for the powerpc linux server stub.
All three EBB registers are accessible. Only a subset of the PMU
registers can be accessed through ptrace. Because of this, the PMU
registers are enumerated individually in gdbarch_tdep, as opposed to
having a single "have_pmu" flag. This is intended to make it easier
to add additional PMU registers in the future, since checking a
"have_pmu" flag elsewhere in the code would no longer be correct. The
tdesc feature is named org.gnu.gdb.power.linux.pmu because of this.
It's unclear if it makes sense to save and restore these registers
across function calls, since some of them can be modified
asynchronously. They are also not tracked in record-replay mode.
The kernel can return ENODATA when ptrace is used to get the EBB
registers, unless a linux performance event that uses EBB is open in
the inferior. For this reason, the "fill" functions in the server
stub for the ebb register sets is not implemented.
Since gdbserver writes all registers in one go before resuming the
inferior, this error would not be detected at the time the user tries
to write to one of the registers on the client side, and gdbserver
would print out warnings every time it resumes the inferior when no
ebb performance event is opened, so there is currently no
straightforward way to handle this case. This means the ebb registers
in the client-side regcache can become dirty when the user tries to
write to them, until the inferior is resumed and stopped again.
A related issue is that 'G' packets used to write to unrelated
registers will include bad data for the EBB registers if they are
unavailable, since no register status information is included in the
'G' packet. This data won't be written to the inferior by the
gdbserver stub because the "fill" functions are not implemented, and
currently the gdbserver stub doesn't change the status of the
registers in its own regcache in response to 'G' packets.
Another limitation for the ebb registers is that traceframes don't
record if registers are available or not, so if these registers are
collected when a tracepoint is hit and the inferior has no ebb event
opened, the user will see zero values for all of them, instead of the
usual <unavailable>.
Because these registers are often unavailable, trying to store them
with target_store_registers with -1 for the regno argument (all
registers) would almost always fail, so they are ignored in this case.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_EBBREGSET)
(PPC_LINUX_SIZEOF_PMUREGSET): Declare.
* nat/ppc-linux.h (PPC_FEATURE2_EBB, NT_PPC_EBB, NT_PPC_PMU):
Define if not already defined.
* features/rs6000/power-ebb.xml: New file.
* features/rs6000/power-linux-pmu.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.xml: Include ebb and pmu
features.
* features/rs6000/powerpc-isa207-vsx64l.xml: Likewise.
* features/rs6000/powerpc-isa207-vsx32l.c: Re-generate.
* features/rs6000/powerpc-isa207-vsx64l.c: Re-generate.
* regformats/rs6000/powerpc-isa207-vsx32l.dat: Re-generate.
* regformats/rs6000/powerpc-isa207-vsx64l.dat: Re-generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with ebb and pmu regsets.
(store_register, store_ppc_registers): Call store_regset with ebb
and pmu regsets.
(ppc_linux_nat_target::read_description): Set isa207 field in the
features struct if ebb and pmu are avaiable.
* ppc-linux-tdep.c (ppc32_regmap_ebb, ppc32_regmap_pmu)
(ppc32_linux_ebbregset, ppc32_linux_pmuregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the ebb
and pmu regsets.
(ppc_linux_core_read_description): Check if the pmu section is
present and set isa207 in the features struct.
* ppc-linux-tdep.h (ppc32_linux_ebbregset)
(ppc32_linux_pmuregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <ppc_mmcr0_regnum>: New field.
<ppc_mmcr2_regnum, ppc_siar_regnum, ppc_sdar_regnum>: New fields.
<ppc_sier_regnum>: New field.
(enum): <PPC_BESCR_REGNUM, PPC_EBBHR_REGNUM, PPC_EBBRR_REGNUM>:
New enum values.
<PPC_MMCR0_REGNUM, PPC_MMCR2_REGNUM, PPC_SIAR_REGNUM>: New enum
values.
<PPC_SDAR_REGNUM, PPC_SIER_REGNUM>: New enum values.
(PPC_IS_EBB_REGNUM, PPC_IS_PMU_REGNUM): Define.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate the
ebb and pmu features.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (powerpc*-*-linux*): Add rs6000/power-ebb.xml and
rs6000/power-linux-pmu.xml to srv_xmlfiles.
* linux-ppc-low.c (ppc_store_ebbregset, ppc_fill_pmuregset)
(ppc_store_pmuregset): New functions.
(ppc_regsets): Add entries for ebb and pmu regsets.
(ppc_arch_setup): Set isa207 in features struct if the ebb and
pmu regsets are available. Set sizes for these regsets.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.ebb" and "org.gnu.gdb.power.linux.pmu".
|
|
This patch adds support for the Target Address Register for powerpc
linux native and core file targets, and in the powerpc linux server
stub.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_vsx32l)
(tdesc_powerpc_isa207_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TARREGSET): Define.
(struct ppc_linux_features) <isa207>: New field.
(ppc_linux_no_features): Add initializer for isa207 field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_ARCH_2_07, PPC_FEATURE2_TAR)
(NT_PPC_TAR): Define if not already defined.
* features/Makefile (WHICH): Add rs6000/powerpc-isa207-vsx32l and
rs6000/powerpc-isa207-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa207-vsx32l.xml and
rs6000/powerpc-isa207-vsx64l.xml.
* features/rs6000/power-tar.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.xml: New file.
* features/rs6000/powerpc-isa207-vsx64l.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.c: Generate.
* features/rs6000/powerpc-isa207-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa207-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa207-vsx64l.dat: Generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with the TAR regset.
(store_register, store_ppc_registers): Call store_regset with the
TAR regset.
(ppc_linux_nat_target::read_description): Set isa207 field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa207-vsx32l.c and
features/rs6000/powerpc-isa207-vsx64l.c.
(ppc32_regmap_tar, ppc32_linux_tarregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the tar
regset.
(ppc_linux_core_read_description): Check if the tar section is
present and set isa207 in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa207_vsx32l and
initialize_tdesc_powerpc_isa207_vsx64l.
* ppc-linux-tdep.h (ppc32_linux_tarregset): Declare.
* ppc-tdep.h (gdbarch_tdep) <ppc_tar_regnum>: New field.
(enum) <PPC_TAR_REGNUM>: New enum value.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate tar
feature.
(ppc_process_record_op31): Record changes to TAR.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa207-vsx64l-ipa.o and powerpc-isa207-vsx32l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa207-vsx32l.o and
powerpc-isa207-vsx64l.o to srv_regobj, add rs6000/power-tar.xml,
rs6000/powerpc-isa207-vsx32l.xml, and
rs6000/powerpc-isa207-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA207_VSX>: New enum value.
(init_registers_powerpc_isa207_vsx32l): Declare.
(init_registers_powerpc_isa207_vsx64l): Declare.
* linux-ppc-low.c (ppc_fill_tarregset): New function.
(ppc_store_tarregset): New function.
(ppc_regsets): Add entry for the TAR regset.
(ppc_arch_setup): Set isa207 in features struct when needed. Set
size for the TAR regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA207_VSX.
(initialize_low_arch): Call init_registers_powerpc_isa207_vsx32l
and init_registers_powerpc_isa207_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle PPC_TDESC_ISA207_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa207_vsx32l and
init_registers_powerpc_isa207_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-tar.c: New file.
* gdb.arch/powerpc-tar.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new feature
"org.gnu.gdb.power.tar".
|
|
This patch adds gdb support for the Program Priorty Register and the
Data Stream Control Register, for the powerpc linux native and core
file targets, and for the powerpc linux server stub.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa205_ppr_dscr_vsx32l)
(tdesc_powerpc_isa205_ppr_dscr_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_PPRREGSET)
(PPC_LINUX_SIZEOF_DSCRREGSET): Define.
(struct ppc_linux_features) <ppr_dscr>: New field.
(ppc_linux_no_features): Add initializer for ppr_dscr field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_DSCR, NT_PPC_PPR, NT_PPC_DSCR):
Define if not already defined.
* features/Makefile (WHICH): Add
rs6000/powerpc-isa205-ppr-dscr-vsx32l and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml.
* features/rs6000/power-dscr.xml: New file.
* features/rs6000/power-ppr.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Generate.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa205-ppr-dscr-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-ppr-dscr-vsx64l.dat: Generate.
* ppc-linux-nat.c: Include <sys/uio.h>.
(fetch_regset, store_regset, check_regset): New functions.
(fetch_register, fetch_ppc_registers): Call fetch_regset with
DSCR and PPR regsets.
(store_register, store_ppc_registers): Call store_regset with
DSCR and PPR regsets.
(ppc_linux_get_hwcap2): New function.
(ppc_linux_nat_target::read_description): Call
ppc_linux_get_hwcap2 and check_regset, set ppr_dscr field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c and
features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c.
(ppc32_regmap_ppr, ppc32_regmap_dscr, ppc32_linux_pprregset)
(ppc32_linux_dscrregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the ppr
and dscr regsets.
(ppc_linux_core_read_description): Check if the ppr and dscr
sections are present and set ppr_dscr in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa205_ppr_dscr_vsx32l and
initialize_tdesc_powerpc_isa205_ppr_dscr_vsx64l.
* ppc-linux-tdep.h (ppc32_linux_pprregset)
(ppc32_linux_dscrregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <ppc_ppr_regnum>: New field.
<ppc_dscr_regnum>: New field.
(enum) <PPC_PPR_REGNUM, PPC_DSCR_REGNUM>: New enum values.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate ppr
and dscr features.
(ppc_process_record_op31): Record changes to PPR and DSCR.
gdb/gdbserver/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa205-ppr-dscr-vsx32l-ipa.o and
powerpc-isa205-ppr-dscr-vsx64l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa205-ppr-dscr-vsx32l.o and
powerpc-isa205-ppr-dscr-vsx64l.o to srv_regobj, add
rs6000/power-dscr.xml, rs6000/power-ppr.xml,
rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA205_PPR_DSCR_VSX>: New enum value.
(init_registers_powerpc_isa205_ppr_dscr_vsx32l)
(init_registers_powerpc_isa205_ppr_dscr_vsx64l): Declare.
* linux-ppc-low.c: Include "elf/common.h" and <sys/uio.h>.
(ppc_hwcap): Add comment.
(ppc_hwcap2): New global.
(ppc_check_regset, ppc_fill_pprregset, ppc_store_pprregset)
(ppc_fill_dscrregset, ppc_store_dscrregset): New functions.
(ppc_regsets): Add entries for the DSCR and PPR regsets.
(ppc_arch_setup): Get AT_HWCAP2. Set ppr_dscr in features struct
when needed. Set sizes for the the DSCR and PPR regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA205_PPR_DSCR_VSX.
(initialize_low_arch): Call
init_registers_powerpc_isa205_ppr_dscr_vsx32l and
init_registers_powerpc_isa205_ppr_dscr_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle
PPC_TDESC_ISA205_PPR_DSCR_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa205_ppr_dscr_vsx32l and
init_registers_powerpc_isa205_ppr_dscr_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-ppr-dscr.c: New file.
* gdb.arch/powerpc-ppr-dscr.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.ppr" and "org.gnu.gdb.power.dscr".
|
|
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
|
|
I noticed that a variable in get_startup_shell is "static". However,
I couldn't see any reason it ought to be, so this removes the
"static".
gdb/ChangeLog
2018-09-14 Tom Tromey <tom@tromey.com>
* nat/fork-inferior.c (get_startup_shell): Remove "static".
|
|
The patch
528e157 ("Replace some uses of xstrprintf with string_printf")
forgot to actually change an xstrprintf call to string_printf, this one
fixes it.
gdb/ChangeLog:
* nat/linux-osdata.c (commandline_from_pid): Replace xstrprintf
with string_printf.
|
|
This patch replaces some simple uses of xstrprintf with with
string_printf, removing the need to do manual memory freeing.
The change in ada-lang.c fixes an apparent memory leak.
Regtested on the buildbot.
gdb/ChangeLog:
* common/filestuff.h (gdb_fopen_cloexec): New overload.
(gdb_open_cloexec): Likewise.
* nat/linux-osdata.c (command_from_pid): Use string_printf.
(commandline_from_pid): Likewise.
(linux_xfer_osdata_threads): Likewise.
(linux_xfer_osdata_fds): Likewise.
* ada-lang.c (is_package_name): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
* breakpoint.c (print_one_breakpoint_location): Use
uiout::field_fmt.
(print_one_catch_solib): Use string_printf.
* coff-pe-read.c (add_pe_exported_sym): Likewise.
(add_pe_forwarded_sym): Likewise.
* dwarf2read.c (create_type_unit_group): Likewise.
(build_error_marker_type): Likewise.
* infcall.c (get_function_name): Likewise.
* valprint.c (print_converted_chars_to_obstack): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.
|
|
I noticed a buildbot failure where gdb crashed in info-os.exp, when
compiled with -D_GLIBCXX_DEBUG:
(gdb) info os procgroups
/usr/include/c++/7/bits/stl_algo.h:4834:
Error: comparison doesn't meet irreflexive requirements, assert(!(a < a)).
Objects involved in the operation:
iterator::value_type "< operator type" {
type = pid_pgid_entry;
}
The bug here is that pid_pgid_entry::operator< violates the C++
irreflexivity rule; that is, that an object cannot be less than
itself.
Tested locally by re-running info-os.exp.
gdb/ChangeLog
2018-07-30 Tom Tromey <tom@tromey.com>
* nat/linux-osdata.c (pid_pgid_entry::operator<): Fix
irreflexivity violation.
|
|
Found using the newly-enabled -Wunused-variable.
gdb/ChangeLog:
* aarch64-linux-nat.c
(aarch64_linux_nat_target::stopped_data_address): Remove unused
variable.
* arm-linux-nat.c (fetch_regs): Likewise.
(store_regs): Likewise.
(fetch_vfp_regs): Likewise.
(store_vfp_regs): Likewise.
(arm_linux_nat_target::insert_hw_breakpoint): Likewise.
(arm_linux_nat_target::remove_hw_breakpoint): Likewise.
(arm_linux_nat_target::insert_watchpoint): Likewise.
(arm_linux_nat_target::remove_watchpoint): Likewise.
* mips-linux-nat.c (mips_linux_nat_target::insert_watchpoint):
Likewise.
* nat/aarch64-sve-linux-ptrace.c (aarch64_sve_get_sveregs):
Likewise.
* ppc-linux-nat.c (fetch_register): Likewise.
(fetch_all_gp_regs): Likewise.
(fetch_ppc_registers): Likewise.
(store_all_gp_regs): Likewise.
(store_ppc_registers): Likewise.
(hwdebug_insert_point): Likewise.
(can_use_watchpoint_cond_accel): Likewise.
* remote-sim.c (gdb_os_write_stdout): Likewise.
gdb/gdbserver/ChangeLog:
* linux-mips-low.c (mips_collect_ptrace_register): Remove unused
variable.
(mips_supply_ptrace_register): Likewise.
|
|
There's a buildroot where I want to debug a binary, and I tried to
connect to it from outside, but got very weird errors like
architecture mismatch or protocol errors. At last, after switching on
'--debug' for gdbserver I found a message 'Can't open /proc/pid/'
message and suddenly found that I forgot to mount procfs in my
buildroot.
Make discovering the problem easier by making GDB / GDBserver warn
(even without --debug) if /proc can not be accessed.
Native debugging:
(gdb) start
Temporary breakpoint 1 at 0x400835: file test.c, line 10.
Starting program: /tmp/test
warning: /proc is not accessible.
GDBserver/remote debugging:
$ ./gdbserver :9999 ./gdbserver
gdbserver: /proc is not accessible.
gdb/ChangeLog:
2018-07-04 Vyacheslav Barinov <v.barinov@samsung.com>
Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_init_ptrace): Rename to ...
(linux_init_ptrace_procfs): ... this. Call
linux_proc_init_warnings.
(linux_nat_target::post_attach)
(linux_nat_target::post_startup_inferior): Adjust.
* nat/linux-procfs.c (linux_proc_init_warnings): Define function.
* nat/linux-procfs.h (linux_proc_init_warnings): Declare function.
gdb/gdbserver/ChangeLog:
2018-07-04 Vyacheslav Barinov <v.barinov@samsung.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (initialize_low): Call linux_proc_init_warnings.
|
|
This removes ptid_lwp_p in favor of the ptid_t::lwp_p method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_lwp_p): Remove.
* common/ptid.h (ptid_lwp_p): Don't declare.
* fbsd-nat.c: Update.
* linux-nat.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* sol-thread.c: Update.
|
|
This removes ptid_get_lwp in favor of calling the ptid_t::lwp method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_lwp): Remove.
* common/ptid.h (ptid_get_lwp): Don't declare.
* aarch64-linux-nat.c: Update.
* ada-tasks.c: Update.
* aix-thread.c: Update.
* amd64-linux-nat.c: Update.
* arm-linux-nat.c: Update.
* corelow.c: Update.
* fbsd-nat.c: Update.
* fbsd-tdep.c: Update.
* gnu-nat.c: Update.
* i386-cygwin-tdep.c: Update.
* i386-gnu-nat.c: Update.
* i386-linux-nat.c: Update.
* ia64-linux-nat.c: Update.
* inf-ptrace.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* mips-linux-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/aarch64-linux.c: Update.
* nat/linux-btrace.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* obsd-nat.c: Update.
* ppc-fbsd-nat.c: Update.
* ppc-linux-nat.c: Update.
* procfs.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* remote.c: Update.
* s390-linux-nat.c: Update.
* sol-thread.c: Update.
* sol2-tdep.c: Update.
* spu-linux-nat.c: Update.
* x86-linux-nat.c: Update.
* xtensa-linux-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-mips-low.c: Update.
* lynx-low.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* thread-db.c: Update.
|
|
This removes ptid_get_pid in favor of calling the ptid_t::pid method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_pid): Remove.
* common/ptid.h (ptid_get_pid): Don't declare.
* aarch64-linux-nat.c: Update.
* ada-lang.c: Update.
* aix-thread.c: Update.
* alpha-bsd-nat.c: Update.
* amd64-fbsd-nat.c: Update.
* amd64-linux-nat.c: Update.
* arm-linux-nat.c: Update.
* arm-nbsd-nat.c: Update.
* auxv.c: Update.
* break-catch-syscall.c: Update.
* breakpoint.c: Update.
* bsd-uthread.c: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fbsd-tdep.c: Update.
* gcore.c: Update.
* gnu-nat.c: Update.
* hppa-nbsd-nat.c: Update.
* hppa-obsd-nat.c: Update.
* i386-fbsd-nat.c: Update.
* ia64-linux-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* inferior.h: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* m68k-bsd-nat.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* mips-linux-nat.c: Update.
* mips-nbsd-nat.c: Update.
* mips64-obsd-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/aarch64-linux.c: Update.
* nat/linux-btrace.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* ppc-linux-nat.c: Update.
* ppc-nbsd-nat.c: Update.
* ppc-obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* record.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sh-nbsd-nat.c: Update.
* sol-thread.c: Update.
* sparc-nat.c: Update.
* sparc64-tdep.c: Update.
* spu-linux-nat.c: Update.
* spu-tdep.c: Update.
* target-debug.h: Update.
* target.c: Update.
* thread.c: Update.
* tid-parse.c: Update.
* tracefile-tfile.c: Update.
* vax-bsd-nat.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* x86-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-mips-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* tracepoint.c: Update.
|
|
This removes pid_to_ptid in favor of calling the ptid_t constructor
directly.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (pid_to_ptid): Remove.
* common/ptid.h (pid_to_ptid): Don't declare.
* aix-thread.c: Update.
* arm-linux-nat.c: Update.
* common/ptid.c: Update.
* common/ptid.h: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fork-child.c: Update.
* gnu-nat.c: Update.
* go32-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/fork-inferior.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* procfs.c: Update.
* progspace.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sol-thread.c: Update.
* spu-linux-nat.c: Update.
* target.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-ppc-low.c: Update.
* linux-x86-low.c: Update.
* proc-service.c: Update.
* server.c: Update.
* spu-low.c: Update.
* thread-db.c: Update.
* win32-low.c: Update.
|
|
This removes ptid_build in favor of simply calling the ptid_t
constructor directly.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.h (ptid_build): Don't declare.
* common/ptid.c (ptid_build): Remove.
* aix-thread.c: Update.
* bsd-kvm.c: Update.
* bsd-uthread.c: Update.
* common/agent.c: Update.
* common/ptid.c: Update.
* common/ptid.h: Update.
* corelow.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* gnu-nat.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-thread-db.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* ravenscar-thread.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* sol-thread.c: Update.
* target.c: Update.
* windows-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* lynx-low.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* spu-low.c: Update.
* thread-db.c: Update.
* win32-low.c: Update.
|
|
Prevents build break on aarch64 Suse.
2018-06-22 Alan Hayward <alan.hayward@arm.com>
gdb/
* nat/aarch64-sve-linux-ptrace.h (HAS_SVE_STATE): Use &.
|
|
Add support for reading and writing registers for Aarch64 SVE.
We need to support the cases where the kernel only gives us a
fpsimd structure. This occurs when there is no active SVE state
in the kernel (for example, after starting a new process).
Added checks to make sure the vector length has not changed whilst
the process is running.
gdb/
* aarch64-linux-nat.c (fetch_sveregs_from_thread): New function.
(store_sveregs_to_thread): Likewise.
(aarch64_linux_fetch_inferior_registers): Check for SVE.
(aarch64_linux_store_inferior_registers): Likewise.
* nat/aarch64-sve-linux-ptrace.c (aarch64_sve_get_sveregs): New
function.
(aarch64_sve_regs_copy_to_regcache): Likewise.
(aarch64_sve_regs_copy_from_regcache): Likewise.
* nat/aarch64-sve-linux-ptrace.h (aarch64_sve_get_sveregs): New
declaration.
(aarch64_sve_regs_copy_to_regcache): Likewise.
(aarch64_sve_regs_copy_from_regcache): Likewise.
(sve_context): Structure from Linux headers.
(SVE_SIG_ZREGS_SIZE): Define from Linux headers.
(SVE_SIG_ZREG_SIZE): Likewise.
(SVE_SIG_PREG_SIZE): Likewise.
(SVE_SIG_FFR_SIZE): Likewise.
(SVE_SIG_REGS_OFFSET): Likewise.
(SVE_SIG_ZREGS_OFFSET): Likewise.
(SVE_SIG_ZREG_OFFSET): Likewise.
(SVE_SIG_ZREGS_SIZE): Likewise.
(SVE_SIG_PREGS_OFFSET): Likewise.
(SVE_SIG_PREG_OFFSET): Likewise.
(SVE_SIG_PREGS_SIZE): Likewise.
(SVE_SIG_FFR_OFFSET): Likewise.
(SVE_SIG_REGS_SIZE): Likewise.
(SVE_SIG_CONTEXT_SIZE): Likewise.
(SVE_PT_REGS_MASK): Likewise.
(SVE_PT_REGS_FPSIMD): Likewise.
(SVE_PT_REGS_SVE): Likewise.
(SVE_PT_VL_INHERIT): Likewise.
(SVE_PT_VL_ONEXEC): Likewise.
(SVE_PT_REGS_OFFSET): Likewise.
(SVE_PT_FPSIMD_OFFSET): Likewise.
(SVE_PT_FPSIMD_SIZE): Likewise.
(SVE_PT_SVE_ZREG_SIZE): Likewise.
(SVE_PT_SVE_PREG_SIZE): Likewise.
(SVE_PT_SVE_FFR_SIZE): Likewise.
(SVE_PT_SVE_FPSR_SIZE): Likewise.
(SVE_PT_SVE_FPCR_SIZE): Likewise.
(__SVE_SIG_TO_PT): Likewise.
(SVE_PT_SVE_OFFSET): Likewise.
(SVE_PT_SVE_ZREGS_OFFSET): Likewise.
(SVE_PT_SVE_ZREG_OFFSET): Likewise.
(SVE_PT_SVE_ZREGS_SIZE): Likewise.
(SVE_PT_SVE_PREGS_OFFSET): Likewise.
(SVE_PT_SVE_PREG_OFFSET): Likewise.
(SVE_PT_SVE_PREGS_SIZE): Likewise.
(SVE_PT_SVE_FFR_OFFSET): Likewise.
(SVE_PT_SVE_FPSR_OFFSET): Likewise.
(SVE_PT_SVE_FPCR_OFFSET): Likewise.
(SVE_PT_SVE_SIZE): Likewise.
(SVE_PT_SIZE): Likewise.
(HAS_SVE_STATE): New define.
gdbserver/
* Makefile.in: Add aarch64-sve-linux-ptrace.c.
|
|
This header provides compatibility support for SVE allow building
even when the underlying host system lacks support for SVE.
If the binary is then run on an SVE-enabled kernel then support
will automatically be available.
gdb/
* nat/aarch64-sve-linux-sigcontext.h: New file.
* nat/aarch64-sve-linux-ptrace.h (SVE_VQ_BYTES): Move to
new files.
(SVE_VQ_MIN): Likewise.
(SVE_VQ_MAX): Likewise.
(SVE_VL_MIN): Likewise.
(SVE_VL_MAX): Likewise.
(SVE_NUM_ZREGS): Likewise.
(SVE_NUM_PREGS): Likewise.
(sve_vl_valid): Likewise.
(struct user_sve_header): Likewise.
|
|
Previously VQ was of type long. Using uint64_t ensures it always matches the
same type as the VG register.
Note that in the Linux kernel, VQ is 16bits. We cast it up to 64bits
immediately after reading to ensure we always use the same type throughout
the code.
gdb/
* aarch64-tdep.c (aarch64_read_description): Use uint64_t for VQ.
* aarch64-tdep.h (aarch64_read_description): Likewise.
* arch/aarch64.c (aarch64_create_target_description): Likewise.
* arch/aarch64.h (aarch64_create_target_description): Likewise.
* features/aarch64-sve.c (create_feature_aarch64_sve): Likewise.
* nat/aarch64-sve-linux-ptrace.c(aarch64_sve_get_vq): Likewise.
* nat/aarch64-sve-linux-ptrace.h (aarch64_sve_get_vq): Likewise.
|
|
[Commit log by Simon Marchi]
I get this error:
CXX linux-nat.o
/home/simark/src/binutils-gdb/gdb/linux-nat.c: In function 'void save_stop_reason(lwp_info*)':
/home/simark/src/binutils-gdb/gdb/linux-nat.c:2718:9: error: duplicated 'if' condition [-Werror=duplicated-cond]
else if (GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code))
^~
In file included from /home/simark/src/binutils-gdb/gdb/linux-nat.c:31:0:
/home/simark/src/binutils-gdb/gdb/nat/linux-ptrace.h:173:41: note: previously used here
# define GDB_ARCH_IS_TRAP_BRKPT(X) ((X) == TRAP_BRKPT)
~~~~~^~~~~~~~~~~~~~
/home/simark/src/binutils-gdb/gdb/linux-nat.c:2709:13: note: in expansion of macro 'GDB_ARCH_IS_TRAP_BRKPT'
else if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code))
^~~~~~~~~~~~~~~~~~~~~~
For Alpha, we currently define GDB_ARCH_IS_TRAP_BRKPT and
GDB_ARCH_IS_TRAP_HWBKPT both to ((X) == TRAP_BRKPT), which causes the
two if branches to be duplicated.
Alpha doesn't have hardware breakpoints, so the Linux kernel for Alpha
never sets si_code to TRAP_HWBKPT. We can just remove the special
definitions of these macros for __alpha__ and rely on the default ones.
Since the kernel will never report TRAP_HWBKPT, we will just never enter
the "hardware breakpoint" branch on Alpha (which is fine since it
doesn't have them).
gdb/ChangeLog:
* nat/linux-ptrace.h [__alpha__]
(GDB_ARCH_IS_TRAP_BRKPT, GDB_ARCH_IS_TRAP_HWBKPT): Remove
definitions.
|
|
Returns 0 for systems without SVE support.
Note the defines taken from Linux kernel headers
in aarch64-sve-linux-ptrace.h.
gdb/
* Makefile.in: Add new header.
* gdb/arch/aarch64.h (sve_vg_from_vl): New macro.
(sve_vl_from_vg): Likewise.
(sve_vq_from_vl): Likewise.
(sve_vl_from_vq): Likewise.
(sve_vq_from_vg): Likewise.
(sve_vg_from_vq): Likewise.
* configure.nat: Add new c file.
* nat/aarch64-sve-linux-ptrace.c: New file.
* nat/aarch64-sve-linux-ptrace.h: New file.
gdbserver/
* configure.srv: Add new c/h file.
|
|
This patch moves the native target wordsize getter for ppc linux to
nat/ so that it can be used to simplify ppc_arch_setup in
gdbserver. The ptrace call used to get MSR for this is ultimately the
same as before, but it is no longer necessary to create a temporary
regcache to call fetch_inferior_registers.
gdb/ChangeLog:
2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com>
* configure.nat <linux powerpc>: Add ppc-linux.o to NATDEPFILES.
* ppc-linux-nat.c (ppc_linux_target_wordsize): Move to
nat/ppc-linux.c.
(ppc_linux_nat_target::auxv_parse): Get thread id tid. Call
ppc_linux_target_wordsize with tid.
(ppc_linux_nat_target::read_description): Call ppc_linux_target
wordsize with tid.
* nat/ppc-linux.c: Include nat/gdb_ptrace.h.
(ppc64_64bit_inferior_p): Add static and inline specifiers.
(ppc_linux_target_wordsize): Move here from ppc-linux-nat.c. Add
tid parameter. Remove static specifier.
* nat/ppc-linux.h (ppc64_64bit_inferior_p): Remove declaration.
(ppc_linux_target_wordsize): New declaration.
gdb/gdbserver/ChangeLog:
2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com>
* linux-ppc-low.c (ppc_arch_setup): Remove code for getting the
wordsize of the inferior. Call ppc_linux_target_wordsize.
|
|
This patch updates existing "fall through" comments so that they can
be recognized by gcc's -Wimplicit-fallthrough comment-parsing
heuristic.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* s390-tdep.c (s390_process_record): Fix fall-through comments.
* xcoffread.c (scan_xcoff_symtab): Move comment later.
* symfile.c (section_is_mapped): Fix fall-through comment.
* stabsread.c (define_symbol, read_member_functions): Fix
fall-through comment.
* s390-linux-tdep.c (s390_process_record): Fix fall-through
comment.
* remote.c (remote_wait_as): Fix fall-through comment.
* p-exp.y (yylex): Fix fall-through comment.
* nat/x86-dregs.c (x86_length_and_rw_bits): Fix fall-through
comment.
* msp430-tdep.c (msp430_gdbarch_init): Fix fall-through comment.
* mdebugread.c (parse_partial_symbols): Fix fall-through comment.
* jv-exp.y (yylex): Fix fall-through comment.
* go-exp.y (lex_one_token): Fix fall-through comment.
* gdbtypes.c (get_discrete_bounds, rank_one_type): Fix
fall-through comment.
* f-exp.y (yylex): Fix fall-through comment.
* dwarf2read.c (process_die): Fix fall-through comments.
* dbxread.c (process_one_symbol): Fix fall-through comment.
* d-exp.y (lex_one_token): Fix fall-through comment.
* cp-name-parser.y (yylex): Fix fall-through comment.
* coffread.c (coff_symtab_read): Fix fall-through comment.
* c-exp.y (lex_one_token): Fix fall-through comment.
* arm-tdep.c (arm_decode_miscellaneous): Fix fall-through
comment.
* arch/arm.c (arm_instruction_changes_pc): Fix fall-through
comment.
|
|
Some unaligned watchpoints were currently missed.
On old kernels as specified in
kernel RFE: aarch64: ptrace: BAS: Support any contiguous range (edit)
https://sourceware.org/bugzilla/show_bug.cgi?id=20207
after this patch some other unaligned watchpoints will get reported as false
positives.
With new kernels all the watchpoints should work exactly.
There may be a regresion that it now less merges watchpoints so that with
multiple overlapping watchpoints it may run out of the 4 hardware watchpoint
registers. But as discussed in the original thread GDB needs some generic
watchpoints merging framework to be used by all the target specific code.
Even current FSF GDB code does not merge it perfectly. Also with the more
precise watchpoints one can technically merge them less. And I do not think
it matters too much to improve mergeability only for old kernels.
Still even on new kernels some better merging logic would make sense.
There remains one issue:
kernel-4.15.14-300.fc27.armv7hl
FAIL: gdb.base/watchpoint-unaligned.exp: continue
FAIL: gdb.base/watchpoint-unaligned.exp: continue
(gdb) continue
Continuing.
Unexpected error setting watchpoint: Invalid argument.
(gdb) FAIL: gdb.base/watchpoint-unaligned.exp: continue
But that looks as a kernel bug to me.
(1) It is not a regression by this patch.
(2) It is unrelated to this patch.
gdb/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/19806 and support for PR external/20207.
* NEWS: Mention Aarch64 watchpoint improvements.
* aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed
watchpoints and PR external/20207 watchpoints.
* nat/aarch64-linux-hw-point.c
(kernel_supports_any_contiguous_range): New.
(aarch64_watchpoint_offset): New.
(aarch64_watchpoint_length): Support PR external/20207 watchpoints.
(aarch64_point_encode_ctrl_reg): New parameter offset, new asserts.
(aarch64_point_is_aligned): Support PR external/20207 watchpoints.
(aarch64_align_watchpoint): New parameters aligned_offset_p and
next_addr_orig_p. Support PR external/20207 watchpoints.
(aarch64_downgrade_regs): New.
(aarch64_dr_state_insert_one_point): New parameters offset and
addr_orig.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Update caller.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Support addr_orig and
aligned_offset.
(aarch64_linux_set_debug_regs): Remove const from state. Call
aarch64_downgrade_regs.
(aarch64_show_debug_reg_state): Print also dr_addr_orig_wp.
* nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ...
(DR_CONTROL_MASK): ... this.
(struct aarch64_debug_reg_state): New field dr_addr_orig_wp.
(unsigned int aarch64_watchpoint_offset): New prototype.
(aarch64_linux_set_debug_regs): Remove const from state.
* utils.c (align_up, align_down): Move to ...
* common/common-utils.c (align_up, align_down): ... here.
* utils.h (align_up, align_down): Move to ...
* common/common-utils.h (align_up, align_down): ... here.
gdb/gdbserver/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* linux-aarch64-low.c (aarch64_stopped_data_address):
Likewise.
gdb/testsuite/ChangeLog
2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/19806 and support for PR external/20207.
* gdb.base/watchpoint-unaligned.c: New file.
* gdb.base/watchpoint-unaligned.exp: New file.
|
|
Report that a thread is stopped by a hardware breakpoint if a non-data
watchpoint is set in DR6. This change should be a no-op since a target
still needs to implement the "to_supports_stopped_by_hw_breakpoint"
method before this function is used.
gdb/ChangeLog:
* nat/x86-dregs.c (x86_dr_stopped_by_hw_breakpoint): New function.
* nat/x86-dregs.h (x86_dr_stopped_by_hw_breakpoint): New
prototype.
* x86-nat.c (x86_stopped_by_hw_breakpoint): New function.
(x86_use_watchpoints): Set "stopped_by_hw_breakpoint" target
method.
|
