aboutsummaryrefslogtreecommitdiff
path: root/gdb/nat
AgeCommit message (Collapse)AuthorFilesLines
2021-02-25Add comment regarding include order of <sys/ptrace.h> and <asm/ptrace.h>Kevin Buettner1-0/+6
I added the same comment for nat/aarch64-linux-hw-point.c yesterday. Christian suggested adding the comment for the other file that I had identified as including both <sys/ptrace.h> and <asm/ptrace.h>. I searched the sources in gdb/, but found no other files which include both of these headers. If possible, I would prefer to see us use <sys/ptrace.h> when possible, however, from past experience, I've found that this file does not always contain all of the constants, etc. required by the particular source file. gdb/ChangeLog: * nat/aarch64-sve-linux-ptrace.h: Add comment regarding include order for <sys/ptrace.h> and <asm/ptrace.h>.
2021-02-24Add comment regarding include order of <sys/ptrace.h> and <asm/ptrace.h>Kevin Buettner1-0/+7
gdb/ChangeLog: * nat/aarch64-linux-hw-point.c: Add comment regarding include order for <sys/ptrace.h> and <asm/ptrace.h>.
2021-02-24Fix aarch64-linux-hw-point.c build problemKevin Buettner1-1/+1
Due to a recent glibc header file change, the file nat/aarch64-linux-hw-point.c no longer builds on Fedora rawhide. An enum for PTRACE_SYSEMU is now provided by <sys/ptrace.h>. In the past, PTRACE_SYSEMU was defined only in <asm/ptrace.h>. This is what it looks like... In <asm/ptrace.h>: #define PTRACE_SYSEMU 31 In <sys/ptrace.h>: enum __ptrace_request { ... PTRACE_SYSEMU = 31, #define PT_SYSEMU PTRACE_SYSEMU ... } When <asm/ptrace.h> and <sys/ptrace.h> are both included in a source file, we run into the following build problem when the former is included before the latter: In file included from nat/aarch64-linux-hw-point.c:26: /usr/include/sys/ptrace.h:86:3: error: expected identifier before numeric constant 86 | PTRACE_SYSEMU = 31, | ^~~~~~~~~~~~~ (There are more errors after this one too.) The file builds without error when <asm/ptrace.h> is included after <sys/ptrace.h>. I found that this is already done in nat/aarch64-sve-linux-ptrace.h (which is included by nat/aarch64-linux-ptrace.c). I've tested this change on Fedora rawhide and Fedora 33, both running on an aarch64 machine. gdb/ChangeLog: * nat/aarch64-linux-hw-point.c: Include <asm/ptrace.h> after <sys/ptrace.h>.
2021-02-18amd64-linux-siginfo.c: Adjust include order to avoid gnulib errorKevin Buettner1-1/+1
On Fedora rawhide, after updating to glibc-2.33, I'm seeing the following build failure: CXX nat/amd64-linux-siginfo.o In file included from /usr/include/bits/sigstksz.h:24, from /usr/include/signal.h:315, from ../gnulib/import/signal.h:52, from /ironwood1/sourceware-git/rawhide-gnulib/bld/../../worktree-gnulib/gdbserver/../gdb/nat/amd64-linux-siginfo.c:20: ../gnulib/import/unistd.h:663:3: error: #error "Please include config.h first." 663 | #error "Please include config.h first." | ^~~~~ glibc-2.33 has changed signal.h to now include <bits/sigstksz.h> which, in turn, includes <unistd.h>. For a gdb build, this causes the gnulib version of unistd.h to be pulled in first. The build failure shown above happens because gnulib's config.h has not been included before the include of <signal.h>. The fix is simple - we just rearrange the order of the header file includes to make sure that gdbsupport/commondefs.h is included before attempting to include signal.h. Note that gdbsupport/commondefs.h includes <gnulib/config.h>. Build and regression tested on Fedora 33. On Fedora rawhide, GDB builds again. gdb/ChangeLog: * nat/amd64-linux-siginfo.c: Include "gdbsupport/common-defs.h" (which in turn includes <gnulib/config.h>) before include of <signal.h>.
2021-01-26Use debug_prefixed_printf_cond in windows-nat.cTom Tromey1-12/+12
This changes windows-nat.c and nat/windows-nat.c to use the new debug_prefixed_printf_cond facility. I tried this out on a Windows build and I think it makes the output look a little nicer. 2021-01-26 Tom Tromey <tromey@adacore.com> * windows-nat.c (DEBUG_EXEC, DEBUG_EVENTS, DEBUG_MEM) (DEBUG_EXCEPT): Use debug_prefixed_printf_cond. (windows_init_thread_list, windows_nat::handle_load_dll) (windows_nat::handle_unload_dll, windows_nat_target::resume) (windows_nat_target::resume) (windows_nat_target::get_windows_debug_event) (windows_nat_target::interrupt, windows_xfer_memory) (windows_nat_target::close): Update. * nat/windows-nat.c (DEBUG_EVENTS): Use debug_prefixed_printf_cond. (matching_pending_stop, fetch_pending_stop) (continue_last_debug_event): Update.
2021-01-20gdb: make some variables staticSimon Marchi1-1/+1
I'm trying to enable clang's -Wmissing-variable-declarations warning. This patch fixes all the obvious spots where we can simply add "static" (at least, found when building on x86-64 Linux). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static. * aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind, aarch64_stub_unwind, aarch64_normal_base, ): Make static. * arm-linux-tdep.c (arm_prologue_unwind): Make static. * arm-tdep.c (struct frame_unwind): Make static. * auto-load.c (auto_load_safe_path_vec): Make static. * csky-tdep.c (csky_stub_unwind): Make static. * gdbarch.c (gdbarch_data_registry): Make static. * gnu-v2-abi.c (gnu_v2_abi_ops): Make static. * i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static. * i386-tdep.c (i386_frame_setup_skip_insns, i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns): Make static. * infrun.c (observer_mode): Make static. * linux-nat.c (sigchld_action): Make static. * linux-thread-db.c (thread_db_list): Make static. * maint-test-options.c (maintenance_test_options_list): * mep-tdep.c (mep_csr_registers): Make static. * mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name. (stats): Make static. * nat/linux-osdata.c (struct osdata_type): Make static. * ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static. * progspace.c (last_program_space_num): Make static. * python/py-param.c (struct parm_constant): Remove struct type name. (parm_constants): Make static. * python/py-record-btrace.c (btpy_list_methods): Make static. * python/py-record.c (recpy_gap_type): Make static. * record.c (record_goto_cmdlist): Make static. * regcache.c (regcache_descr_handle): Make static. * registry.h (DEFINE_REGISTRY): Make definition static. * symmisc.c (std_in, std_out, std_err): Make static. * top.c (previous_saved_command_line): Make static. * tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make static. * unittests/command-def-selftests.c (nr_duplicates, nr_invalid_prefixcmd, lists): Make static. * unittests/observable-selftests.c (test_notification): Make static. * unittests/optional/assignment/1.cc (counter): Make static. * unittests/optional/assignment/2.cc (counter): Make static. * unittests/optional/assignment/3.cc (counter): Make static. * unittests/optional/assignment/4.cc (counter): Make static. * unittests/optional/assignment/5.cc (counter): Make static. * unittests/optional/assignment/6.cc (counter): Make static. gdbserver/ChangeLog: * ax.cc (bytecode_address_table): Make static. * debug.cc (debug_file): Make static. * linux-low.cc (stopping_threads): Make static. (step_over_bkpt): Make static. * linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static. * tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt, alloced_trace_state_variables, trace_buffer_ctrl, tracing_start_time, tracing_stop_time, tracing_user_name, tracing_notes, tracing_stop_note): Make static. Change-Id: Ic1d8034723b7802502bda23770893be2338ab020
2021-01-18[gdb/tdep] Handle si_addr_bnd in compat_siginfo_from_siginfoTom de Vries1-0/+13
When running test-case gdb.arch/i386-mpx-sigsegv.exp with target board unix/-m32, we run into: ... (gdb) continue^M Continuing.^M Saw a #BR! status 1 at 0x8048c2d^M ^M Program received signal SIGSEGV, Segmentation fault^M Upper bound violation while accessing address 0x0804c15c^M Bounds: [lower = 0x00000000, upper = 0x00000000].^M 0x08048a4f in lower (p=0x804c160, a=0x804c180, b=0x804c1a0, c=0x804c1c0, \ d=0x804c1e0, len=1) at i386-mpx-sigsegv.c:79^M 79 value = *(p - len);^M (gdb) FAIL: gdb.arch/i386-mpx-sigsegv.exp: MPX signal segv Lower: 0 ... The problem is that lower and upper in the Bounds message are 0x0, which is caused by $_siginfo._sifields._sigfault._addr_bnd.{_lower,_upper} evaluating to 0x0. Fix this by copying the si_lower/si_upper fields in compat_siginfo_from_siginfo. Tested on x86_64-linux, with target board unix/-m32. gdb/ChangeLog: 2021-01-18 Tom de Vries <tdevries@suse.de> PR tdep/27172 * nat/amd64-linux-siginfo.c (cpt_si_lower, cpt_si_upper, SEGV_BNDERR): New macro. (compat_siginfo_from_siginfo): Copy cpt_si_lower and cpt_si_upper for SEGV_BNDERR.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker46-46/+46
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-12-10[AArch64] SVE/FPSIMD fixup for big endianLuis Machado1-14/+63
The FPSIMD dump in signal frames and ptrace FPSIMD dump in the SVE context structure follows the target endianness, whereas the SVE dumps are endianness-independent (LE). Therefore, when the system is in BE mode, we need to reverse the bytes for the FPSIMD data. Given the V registers are larger than 64-bit, I've added a way for value bytes to be set, as opposed to passing a 64-bit fixed quantity. This fits nicely with the unwinding *_got_bytes function and makes the trad-frame more flexible and capable of saving larger registers. The memory for the bytes is allocated via the frame obstack, so it gets freed after we're done inspecting the frame. gdb/ChangeLog: 2020-12-10 Luis Machado <luis.machado@linaro.org> * aarch64-linux-tdep.c (aarch64_linux_restore_vreg) New function. (aarch64_linux_sigframe_init): Call aarch64_linux_restore_vreg. * aarch64-tdep.h (V_REGISTER_SIZE): Move to ... * arch/aarch64.h: ... here. * nat/aarch64-sve-linux-ptrace.c: Include endian.h. (aarch64_maybe_swab128): New function. (aarch64_sve_regs_copy_to_reg_buf) (aarch64_sve_regs_copy_from_reg_buf): Adjust FPSIMD entries. * trad-frame.c (trad_frame_reset_saved_regs): Initialize the data field. (TF_REG_VALUE_BYTES): New enum value. (trad_frame_value_bytes_p): New function. (trad_frame_set_value_bytes): New function. (trad_frame_set_reg_value_bytes): New function. (trad_frame_get_prev_register): Handle register values saved as bytes. * trad-frame.h (trad_frame_set_reg_value_bytes): New prototype. (struct trad_frame_saved_reg) <data>: New field. (trad_frame_set_value_bytes): New prototype. (trad_frame_value_bytes_p): New prototype.
2020-11-02gdb, gdbserver, gdbsupport: fix leading space vs tabs issuesSimon Marchi6-32/+32
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
2020-10-26gdb::handle_eintr, remove need to specify return typePedro Alves1-9/+2
This eliminates the need to specify the return type when using handle_eintr. We let the compiler deduce it for us. Also, use lowercase for function parameter names. Uppercase should only be used on template parameters. gdb/ChangeLog: * nat/linux-waitpid.c: Include "gdbsupport/eintr.h". (my_waitpid): Use gdb::handle_eintr. gdbserver/ChangeLog: * netbsd-low.cc (netbsd_waitpid, netbsd_process_target::kill) (netbsd_qxfer_libraries_svr4): Use gdb::handle_eintr without explicit type. gdbsupport/ChangeLog: * eintr.h (handle_eintr): Replace Ret template parameter with ErrorValType. Use it as type of the failure value. Deduce the function's return type using decltype. Use lowercase for function parameter names.
2020-10-07Correct logical error in NetBSD's read_memory and write_memoryKamil Rytarowski1-2/+2
In case of repeated ptrace PT_IO call and returning the value of transferred bytes equal to 0, do not return without setting xfered_len. gdb/ChangeLog: * nat/netbsd-nat.c (write_memory, read_memory): Update.
2020-10-07Add common write_memory and read_memory NetBSD routinesKamil Rytarowski2-0/+102
Instead of sharing the native-only code with all BSDs with slightly different semantics of the kernels, share the NetBSD-only behavior beteen the NetBSD native and gdbserver setup. NetBSD does not differentiate the address space I and D in the operations (contrary to OpenBSD). NetBSD handles EACCES that integrates with NetBSD specific PaX MPROTECT error handling. Add a verbose message in the native client that an operation could be cancelled due to PaX MPROTECT setup. gdb/ChangeLog: * nat/netbsd-nat.c (write_memory, read_memory): Add. * nat/netbsd-nat.h (write_memory, read_memory): Likewise. * nbsd-nat.c (nbsd_nat_target::xfer_partial): Update. gdbserver/ChangeLog: * netbsd-low.cc (netbsd_process_target::read_memory) (netbsd_process_target::write_memory): Update.
2020-09-24Handle 64bit breakpoints of WOW64 processes as SIGINTHannes Domani2-0/+17
When a WOW64 process triggers a breakpoint exception in 64bit code (which happens when a 64bit gdb calls DebugBreakProcess for a 32bit target), gdb ignores the breakpoint (because Wow64GetThreadContext can only report the pc of 32bit code, and there is not int3 at this location). But if these 64bit breakpoint exceptions are handled as SIGINT, gdb doesn't check for int3, and always stops the target. gdb/ChangeLog: 2020-09-23 Hannes Domani <ssbssa@yahoo.de> * nat/windows-nat.c (handle_exception): Handle 64bit breakpoints in WOW64 processes as SIGINT. * nat/windows-nat.h: Make wow64_process a shared variable. * windows-nat.c: Remove static wow64_process variable. gdbserver/ChangeLog: 2020-09-23 Hannes Domani <ssbssa@yahoo.de> * win32-low.cc: Remove local wow64_process variable. * win32-low.h: Remove local wow64_process variable.
2020-09-10Avoid double free in startup_inferiorKamil Rytarowski1-1/+4
Do not free the last execd pathname as it will be used in prepare_resume_reply(), after attaching a client side. gdb/ChangeLog: * fork-inferior.c (startup_inferior): Avoid double free.
2020-09-10Add a common utility function to read and write siginfo_t in inferiorKamil Rytarowski2-0/+39
gdb/ChangeLog: * netbsd-nat.h (netbsd_nat::qxfer_siginfo): Add. * netbsd-nat.c (netbsd_nat::qxfer_siginfo): Likewise.
2020-09-10Add netbsd_nat::enable_proc_events in gdb/natKamil Rytarowski2-0/+25
Add generic function to enable debugger events in a process. gdb/ChangeLog: * netbsd-nat.h (netbsd_nat::enable_proc_events): Add. * netbsd-nat.c: Include <sys/ptrace.h>. * (netbsd_nat::enable_proc_events): Add.
2020-09-10Add gdb/nat common functions for listing threadsKamil Rytarowski2-0/+145
Add netbsd_nat::netbsd_thread_lister a generic thread lister, used internally in netbsd-nat.c, copied from gdb/nbsd-nat.c. Add public extern functions for listing threads: * netbsd_nat::thread_alive * netbsd_nat::thread_name * netbsd_nat::for_each_thread gdb/ChangeLog: * netbsd-nat.h: Include "gdbsupport/function-view.h". * (netbsd_nat::thread_alive, netbsd_nat::thread_name) (netbsd_nat::for_each_thread): Add. * netbsd-nat.c: Include "gdbsupport/common-defs.h" and "gdbsupport/common-debug.h". * (netbsd_nat::netbsd_thread_lister) (netbsd_nat::thread_alive, netbsd_nat::thread_name) (netbsd_nat::for_each_thread): Add.
2020-09-10Add netbsd_nat::pid_to_exec_fileKamil Rytarowski2-0/+25
gdb/ChangeLog: * netbsd-nat.h: Include <unistd.h>. * (netbsd_nat::pid_to_exec_file): Add. * netbsd-nat.c: Include <sys/types.h> and <sys/sysctl.h>. * (netbsd_nat::pid_to_exec_file) Add.
2020-09-10Register a placeholder for NetBSD shared functions in gdb/natKamil Rytarowski2-0/+51
gdb/ChangeLog: * netbsd-nat.h: New file. * netbsd-nat.c: Likewise.
2020-08-10[AArch64] Fix incorrectly-defined SVE macroLuis Machado1-1/+1
The kernel has fixed this here: https://lore.kernel.org/patchwork/patch/1029011/ We should do the same for GDB, which is still carrying an incorrect definition of the macro. As stated in the kernel patch thread, this doesn't actually change things because, luckily, the structs are of the same size. gdb/ChangeLog: 2020-08-10 Luis Machado <luis.machado@linaro.org> * nat/aarch64-sve-linux-sigcontext.h (SVE_PT_REGS_OFFSET): Use struct user_sve_header instead of struct sve_context.
2020-06-18Don't write to inferior_ptid in windows-nat.c, part IIPedro Alves2-4/+0
Writing to inferior_ptid in windows_nat_target::get_windows_debug_event is just incorrect and not necessary. We'll report the event to GDB's core, which then takes care of switching inferior_ptid / current thread. Related (see windows_nat_target::get_windows_debug_event), there's also a "current_windows_thread" global that is just begging to get out of sync with core GDB's current thread. This patch removes it. gdbserver already does not have an equivalent global in win32-low.cc. gdb/ChangeLog: 2020-06-18 Pedro Alves <palves@redhat.com> * nat/windows-nat.c (current_windows_thread): Remove. * nat/windows-nat.h (current_windows_thread): Remove. * windows-nat.c (windows_nat_target::stopped_by_sw_breakpoint): Adjust. (display_selectors): Adjust to fetch the current windows_thread_info based on inferior_ptid. (fake_create_process): No longer write to current_windows_thread. (windows_nat_target::get_windows_debug_event): Don't set inferior_ptid or current_windows_thread. (windows_nat_target::wait): Adjust to not rely on current_windows_thread. (do_initial_windows_stuff): Now a method of windows_nat_target. Switch to the last_ptid thread. (windows_nat_target::attach): Adjust. (windows_nat_target::detach): Use switch_to_no_thread instead of writing to inferior_ptid directly. (windows_nat_target::create_inferior): Adjust.
2020-05-27Don't close thread handles provided by WaitForDebugEventHannes Domani1-1/+0
I sometimes encountered a weird breakpoint failure when using start: (gdb) start Temporary breakpoint 2 at 0x40162d: file gdb-25911.c, line 4. Starting program: C:\src\tests\gdb-25911.exe Warning: Cannot insert breakpoint 2. Cannot access memory at address 0x401628 After trying a lot of combinations, I found a way to reproduce it: (gdb) file gdb-25987.exe Reading symbols from gdb-25987.exe... (gdb) start Temporary breakpoint 1 at 0x401638: file gdb-25987.cpp, line 13. Starting program: C:\src\tests\gdb-25987.exe Temporary breakpoint 1, main () at gdb-25987.cpp:13 13 int main() { (gdb) c Continuing. Program received signal SIGSEGV, Segmentation fault. MyClass::call (this=0x3d20d0) at gdb-25987.cpp:8 8 *(char*)(nullptr) = 1; (gdb) kill Kill the program being debugged? (y or n) y [Inferior 1 (process 1140) killed] (gdb) file gdb-25911.exe Load new symbol table from "gdb-25911.exe"? (y or n) y Reading symbols from gdb-25911.exe... (gdb) start Temporary breakpoint 2 at 0x40162d: file gdb-25911.c, line 4. Starting program: C:\src\tests\gdb-25911.exe Warning: Cannot insert breakpoint 2. Cannot access memory at address 0x401628 Command aborted. The actual failure was that ReadProcessMemory used a process handle that was no longer valid. And the underlying reason was that the windows_thread_info destructor closes a thread handle that was provided earlier by WaitForDebugEvent. But since this is not allowed (and it was actually already closed at this point, and the handle value reused), this closed another still-needed handle. gdb/ChangeLog: 2020-05-27 Hannes Domani <ssbssa@yahoo.de> * nat/windows-nat.c (windows_thread_info::~windows_thread_info): Don't close thread handle.
2020-05-14Disable record btrace bts support for AMD processorsKevin Buettner1-0/+6
Some Intel processors implement a Branch Trace Store (BTS) which GDB uses for reverse execution support via the "record btrace bts" command. I have been unable to find a description of a similar feature in a recent (April 2020) AMD64 architecture reference: https://www.amd.com/system/files/TechDocs/40332.pdf While it is the case that AMD processors have an LBR (last branch record) bit in the DebugCtl MSR, it seems that it affects only four MSRs when enabled. The names of these MSRs are LastBranchToIP, LastBranchFromIP, LastIntToIP, and LastIntFromIP. I can find no mention of anything more extensive. While looking at an Intel architecture document, I noticed that Intel's P6 family from the mid-90s had registers of the same name. Therefore... This commit disables "record btrace bts" support in GDB for AMD processors. Using the test case from gdb.base/break.exp, the sessions below show the expected behavior (run on a machine with an Intel processor) versus that on a machine with an AMD processor. The AMD processor in question is reported as follows by "lscpu": AMD Ryzen Threadripper 2950X 16-Core Processor . Finally, I'll note that the AMD machine is actually a VM, but I see similar behavior on both the virtualization host and the VM. Intel machine - Desired behavior: [kevinb@mohave gdb]$ ./gdb -q testsuite/outputs/gdb.base/break/break Reading symbols from testsuite/outputs/gdb.base/break/break... (gdb) start Temporary breakpoint 1 at 0x401179: file /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c, line 43. Starting program: /home/kevinb/sourceware-git/native-build/bld/gdb/testsuite/outputs/gdb.base/break/break Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd748, envp=0x7fffffffd758) at /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c:43 43 if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */ (gdb) record btrace (gdb) b factorial Breakpoint 2 at 0x40121b: file /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c, line 63. (gdb) c Continuing. Breakpoint 2, factorial (value=6) at /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c:63 63 if (value > 1) { /* set breakpoint 7 here */ (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64kB. Recorded 768 instructions in 22 functions (0 gaps) for thread 1 (process 19215). (gdb) record function-call-history 13 do_lookup_x 14 _dl_lookup_symbol_x 15 _dl_fixup 16 _dl_runtime_resolve_xsavec 17 atoi 18 strtoq 19 ____strtoll_l_internal 20 atoi 21 main 22 factorial (gdb) record instruction-history 759 0x00007ffff7ce0917 <____strtoll_l_internal+647>: pop %r15 760 0x00007ffff7ce0919 <____strtoll_l_internal+649>: retq 761 0x00007ffff7cdd064 <atoi+20>: add $0x8,%rsp 762 0x00007ffff7cdd068 <atoi+24>: retq 763 0x00000000004011b1 <main+75>: mov %eax,%edi 764 0x00000000004011b3 <main+77>: callq 0x401210 <factorial> 765 0x0000000000401210 <factorial+0>: push %rbp 766 0x0000000000401211 <factorial+1>: mov %rsp,%rbp 767 0x0000000000401214 <factorial+4>: sub $0x10,%rsp 768 0x0000000000401218 <factorial+8>: mov %edi,-0x4(%rbp) AMD machine - Wrong behavior: [kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/break/break Reading symbols from testsuite/outputs/gdb.base/break/break... (gdb) start Temporary breakpoint 1 at 0x401179: file /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c, line 43. Starting program: /mesquite2/sourceware-git/f32-master/bld/gdb/testsuite/outputs/gdb.base/break/break Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd5b8, envp=0x7fffffffd5c8) at /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c:43 43 if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */ (gdb) record btrace (gdb) b factorial Breakpoint 2 at 0x40121b: file /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c, line 63. (gdb) c Continuing. Breakpoint 2, factorial (value=6) at /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c:63 63 if (value > 1) { /* set breakpoint 7 here */ (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64kB. warning: Recorded trace may be incomplete at instruction 7737 (pc = 0x405000). warning: Recorded trace may be incomplete at instruction 7739 (pc = 0x0). Recorded 7740 instructions in 46 functions (2 gaps) for thread 1 (process 1402911). (gdb) record function-call-history 37 ?? 38 values 39 some_enum_global 40 ?? 41 some_union_global 42 some_variable 43 ?? 44 [decode error (2): unknown instruction] 45 ?? 46 [decode error (2): unknown instruction] (gdb) record instruction-history 7730 0x0000000000404ff3: add %al,(%rax) 7731 0x0000000000404ff5: add %al,(%rax) 7732 0x0000000000404ff7: add %al,(%rax) 7733 0x0000000000404ff9: add %al,(%rax) 7734 0x0000000000404ffb: add %al,(%rax) 7735 0x0000000000404ffd: add %al,(%rax) 7736 0x0000000000404fff: .byte 0x0 7737 0x0000000000405000: Cannot access memory at address 0x405000 Lastly, I'll note that I see a lot of gdb.btrace failures without this commit. Worse still, the results aren't always the same which causes a lot of noise when comparing test results. gdbsupport/ChangeLog: * btrace-common.h (btrace_cpu_vendor): Add CV_AMD. gdb/ChangeLog: * nat/linux-btrace.c (btrace_this_cpu): Add check for AMD processors. (cpu_supports_bts): Add CV_AMD case.
2020-04-24Fix Windows debugging regressionTom Tromey1-0/+5
The updated pending stop series introduced a regression in Windows debugging. When stopped at a software breakpoint, we would adjust the PC each time it was requested -- however, more than a single adjustment is incorrect. This patch introduces a new flag that is used to ensure the adjustment only happens a single time. No similar change is needed in gdbserver, because it adjusts the PC in a different way. I still can't run the gdb test suite on Windows, but I can run the internal AdaCore test suite there; and this fixes the regressions there. gdb/ChangeLog 2020-04-24 Tom Tromey <tromey@adacore.com> * nat/windows-nat.h (struct windows_thread_info) <pc_adjusted>: New member. * windows-nat.c (windows_fetch_one_register): Check pc_adjusted. (windows_nat_target::get_windows_debug_event) (windows_nat_target::wait): Set pc_adjusted.
2020-04-16Fix Cygwin gdb buildTom Tromey2-20/+9
Simon pointed out that the windows-nat sharing series broke the Cygwin build. This patch fixes the problem, by moving the Cygwin-specific code to a new handler function. This approach is taken because this code calls find_pc_partial_function, which isn't available in gdbserver. gdb/ChangeLog 2020-04-16 Tom Tromey <tromey@adacore.com> * windows-nat.c (windows_nat::handle_access_violation): New function. * nat/windows-nat.h (handle_access_violation): Declare. * nat/windows-nat.c (handle_exception): Move Cygwin code to windows-nat.c. Call handle_access_violation. gdbserver/ChangeLog 2020-04-16 Tom Tromey <tromey@adacore.com> * win32-low.cc (windows_nat::handle_access_violation): New function.
2020-04-10Fix debugging of WOW64 processesHannes Domani2-3/+12
The new code regarding pending stops only checks for EXCEPTION_BREAKPOINT, but for WOW64 processes STATUS_WX86_BREAKPOINT is necessary as well. Also, ignore_first_breakpoint is used now in nat/windows-nat.c as well, but was not available there. gdb/ChangeLog: 2020-04-10 Hannes Domani <ssbssa@yahoo.de> * nat/windows-nat.c (STATUS_WX86_BREAKPOINT, STATUS_WX86_SINGLE_STEP): Move to... * nat/windows-nat.h (STATUS_WX86_BREAKPOINT, STATUS_WX86_SINGLE_STEP): ... here. * windows-nat.c (windows_nat_target::get_windows_debug_event): Check for STATUS_WX86_BREAKPOINT. (windows_nat_target::wait): Same.
2020-04-08Make last_wait_event staticTom Tromey2-9/+9
Now that last_wait_event is entirely handled in nat/windows-nat.c, it can be made static. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * nat/windows-nat.h (last_wait_event): Don't declare. (wait_for_debug_event): Update comment. * nat/windows-nat.c (last_wait_event): Now static.
2020-04-08Move wait_for_debug_event to nat/windows-nat.cTom Tromey2-0/+15
This moves the wait_for_debug_event helper function to nat/windows-nat.c, and changes gdbserver to use it. wait_for_debug_event is a wrapper for WaitForDebugEvent that also sets last_wait_event when appropriate. This is needed to properly handle queued stops. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (wait_for_debug_event): Move to nat/windows-nat.c. * nat/windows-nat.h (wait_for_debug_event): Declare. * nat/windows-nat.c (wait_for_debug_event): Move from windows-nat.c. No longer static. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (win32_kill, get_child_debug_event): Use wait_for_debug_event.
2020-04-08Introduce fetch_pending_stopTom Tromey2-0/+35
This introduces a new "fetch_pending_stop" function and changes gdb to use it. This function removes the first matching pending stop from the list of such stops. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (get_windows_debug_event): Use fetch_pending_stop. * nat/windows-nat.h (fetch_pending_stop): Declare. * nat/windows-nat.c (fetch_pending_stop): New function.
2020-04-08Share some inferior-related Windows codeTom Tromey2-0/+59
This adds a couple of functions to nat/windows-nat.c and changes gdb and gdbserver to use them. One function checks the list of pending stops for a match (not yet used by gdbserver, but will be in a subsequent patch); and the other is a wrapper for ContinueDebugEvent that always uses the last "real" stop event. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (windows_continue): Use matching_pending_stop and continue_last_debug_event. * nat/windows-nat.h (matching_pending_stop) (continue_last_debug_event): Declare. * nat/windows-nat.c (DEBUG_EVENTS): New define. (matching_pending_stop, continue_last_debug_event): New functions. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (child_continue): Call continue_last_debug_event.
2020-04-08Share handle_exceptionTom Tromey2-0/+195
Both gdb and gdbserver have a "handle_exception" function, the bulk of which is shared between the two implementations. This patch arranges for the entire thing to be moved into nat/windows-nat.c, with the differences handled by callbacks. This patch introduces one more callback to make this possible. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (MS_VC_EXCEPTION): Move to nat/windows-nat.c. (handle_exception_result): Move to nat/windows-nat.h. (DEBUG_EXCEPTION_SIMPLE): Remove. (windows_nat::handle_ms_vc_exception): New function. (handle_exception): Move to nat/windows-nat.c. (get_windows_debug_event): Update. (STATUS_WX86_BREAKPOINT, STATUS_WX86_SINGLE_STEP): Move to nat/windows-nat.c. * nat/windows-nat.h (handle_ms_vc_exception): Declare. (handle_exception_result): Move from windows-nat.c. (handle_exception): Declare. * nat/windows-nat.c (MS_VC_EXCEPTION, handle_exception) (STATUS_WX86_SINGLE_STEP, STATUS_WX86_BREAKPOINT): Move from windows-nat.c. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (handle_exception): Remove. (windows_nat::handle_ms_vc_exception): New function. (get_child_debug_event): Add "continue_status" parameter. Update. (win32_wait): Update.
2020-04-08Share handle_load_dll and handle_unload_dll declarationsTom Tromey1-0/+19
This changes nat/windows-nat.h to declare handle_load_dll and handle_unload_dll. The embedding application is required to implement these -- while the actual code was difficult to share due to some other differences between the two programs, sharing the declaration lets a subsequent patch share more code that uses these as callbacks. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (windows_nat::handle_load_dll) (windows_nat::handle_unload_dll): Rename. No longer static. * nat/windows-nat.h (handle_load_dll, handle_unload_dll): Declare. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (windows_nat::handle_load_dll): Rename from handle_load_dll. No longer static. (windows_nat::handle_unload_dll): Rename from handle_unload_dll. No longer static.
2020-04-08Normalize handle_output_debug_string APITom Tromey1-0/+11
This changes gdbserver's implementation of handle_output_debug_string to have the same calling convention as that of gdb. This allows for sharing some more code in a subsequent patch. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (windows_nat::handle_output_debug_string): Rename. No longer static. * nat/windows-nat.h (handle_output_debug_string): Declare. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (handle_output_debug_string): Add parameter. Change return type. (win32_kill, get_child_debug_event): Update.
2020-04-08Share some Windows-related globalsTom Tromey2-1/+69
This moves some Windows-related globals into nat/windows-nat.c, sharing them between gdb and gdbserver. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (current_process_handle, current_process_id) (main_thread_id, last_sig, current_event, last_wait_event) (current_windows_thread, desired_stop_thread_id, pending_stops) (struct pending_stop, siginfo_er): Move to nat/windows-nat.c. (display_selectors, fake_create_process) (get_windows_debug_event): Update. * nat/windows-nat.h (current_process_handle, current_process_id) (main_thread_id, last_sig, current_event, last_wait_event) (current_windows_thread, desired_stop_thread_id, pending_stops) (struct pending_stop, siginfo_er): Move from windows-nat.c. * nat/windows-nat.c (current_process_handle, current_process_id) (main_thread_id, last_sig, current_event, last_wait_event) (current_windows_thread, desired_stop_thread_id, pending_stops) (siginfo_er): New globals. Move from windows-nat.c. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (current_process_handle, current_process_id) (main_thread_id, last_sig, current_event, siginfo_er): Move to nat/windows-nat.c.
2020-04-08Share get_image_name between gdb and gdbserverTom Tromey2-0/+64
This moves get_image_name to nat/windows-nat.c so that it can be shared between gdb and gdbserver. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (get_image_name): Move to nat/windows-nat.c. (handle_load_dll): Update. * nat/windows-nat.c (get_image_name): Move from windows-nat.c. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (get_image_name): Remove. (handle_load_dll): Update.
2020-04-08Share thread_rec between gdb and gdbserverTom Tromey1-0/+21
This changes gdb and gdbserver to use the same calling convention for the "thread_rec" helper function. Fully merging these is difficult due to differences in how threads are managed by the enclosing applications; but sharing a declaration makes it possible for future shared code to call this method. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (enum thread_disposition_type): Move to nat/windows-nat.h. (windows_nat::thread_rec): Rename from thread_rec. No longer static. (windows_add_thread, windows_nat_target::fetch_registers) (windows_nat_target::store_registers, handle_exception) (windows_nat_target::resume, get_windows_debug_event) (windows_nat_target::get_tib_address) (windows_nat_target::thread_name) (windows_nat_target::thread_alive): Update. * nat/windows-nat.h (enum thread_disposition_type): Move from windows-nat.c. (thread_rec): Declare. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (windows_nat::thread_rec): Rename from thread_rec. No longer static. Change parameters. (child_add_thread, child_fetch_inferior_registers) (child_store_inferior_registers, win32_resume) (win32_get_tib_address): Update.
2020-04-08Wrap shared windows-nat code in windows_nat namespaceTom Tromey2-0/+10
This wraps the shared windows-nat code in a windows_nat namespace. This helps avoid name clashes. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c: Add "using namespace". * nat/windows-nat.h: Wrap contents in windows_nat namespace. * nat/windows-nat.c: Wrap contents in windows_nat namespace. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.h (struct win32_target_ops): Use qualified names where needed. * win32-i386-low.c: Add "using namespace". * win32-low.c: Add "using namespace". * win32-arm-low.c: Add "using namespace".
2020-04-08Call CloseHandle from ~windows_thread_infoTom Tromey2-0/+7
Add a destructor to windows_thread_info that calls CloseHandle. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * nat/windows-nat.h (struct windows_thread_info): Declare destructor. * nat/windows-nat.c (~windows_thread_info): New. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (delete_thread_info): Don't call CloseHandle.
2020-04-08Handle pending stops from the Windows kernelTom Tromey2-0/+6
PR gdb/22992 concerns an assertion failure in gdb when debugging a certain inferior: int finish_step_over(execution_control_state*): Assertion `ecs->event_thread->control.trap_expected' failed. Initially the investigation centered on the discovery that gdb was not suspending other threads when attempting to single-step. This oversight is corrected in this patch: now, when stepping a thread, gdb will call SuspendThread on all other threads. However, the bug persisted even after this change. In particular, WaitForDebugEvent could see a stop for a thread that was ostensibly suspended. Our theory of what is happening here is that there are actually simultaneous breakpoint hits, and the Windows kernel queues the events, causing the second stop to be reported on a suspended thread. In Windows 10 or later gdb could use the DBG_REPLY_LATER flag to ContinueDebugEvent to request that such events be re-reported later. However, relying on that did not seem advisable, so this patch instead arranges to queue such "pending" stops, and then to report them later, once the step has completed. In the PR, Pedro pointed out that it's best in this scenario to implement the stopped_by_sw_breakpoint method, so this patch does this as well. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> PR gdb/22992 * windows-nat.c (current_event): Update comment. (last_wait_event, desired_stop_thread_id): New globals. (struct pending_stop): New. (pending_stops): New global. (windows_nat_target) <stopped_by_sw_breakpoint> <supports_stopped_by_sw_breakpoint>: New methods. (windows_fetch_one_register): Add assertions. Adjust PC. (windows_continue): Handle pending stops. Suspend other threads when stepping. Use last_wait_event (wait_for_debug_event): New function. (get_windows_debug_event): Use wait_for_debug_event. Handle pending stops. Queue spurious stops. (windows_nat_target::wait): Set stopped_at_software_breakpoint. (windows_nat_target::kill): Use wait_for_debug_event. * nat/windows-nat.h (struct windows_thread_info) <stopped_at_software_breakpoint>: New field. * nat/windows-nat.c (windows_thread_info::resume): Clear stopped_at_software_breakpoint.
2020-04-08Share Windows thread-suspend and -resume codeTom Tromey2-0/+66
This adds "suspend" and "resume" methods to windows_thread_info, and changes gdb and gdbserver to share this code. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (thread_rec): Use windows_thread_info::suspend. (windows_continue): Use windows_continue::resume. * nat/windows-nat.h (struct windows_thread_info) <suspend, resume>: Declare new methods. * nat/windows-nat.c: New file. * configure.nat (NATDEPFILES): Add nat/windows-nat.o when needed. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (win32_require_context, suspend_one_thread): Use windows_thread_info::suspend. (continue_one_thread): Use windows_thread_info::resume. * configure.srv (srv_tgtobj): Add windows-nat.o when needed.
2020-04-08Make windows_thread_info::name a unique_xmalloc_ptrTom Tromey1-6/+1
This changes windows_thread_info::name to be a unique_xmalloc_ptr, removing some manual memory management. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (handle_exception) (windows_nat_target::thread_name): Update. * nat/windows-nat.h (windows_thread_info): Remove destructor. <name>: Now unique_xmalloc_ptr.
2020-04-08Change two windows_thread_info members to "bool"Tom Tromey1-3/+6
This changes a couple of fields of windows_thread_info to have type "bool". It also updates the comment of another field, to clarify the possible values it can hold. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (thread_rec) (windows_nat_target::fetch_registers): Update. * nat/windows-nat.h (struct windows_thread_info) <suspended>: Update comment. <debug_registers_changed, reload_context>: Now bool. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-i386-low.c (update_debug_registers) (i386_prepare_to_resume, i386_thread_added): Update.
2020-04-08Use new and delete for windows_thread_infoTom Tromey1-6/+20
This adds a constructor, destructor, and member initializers to windows_thread_info, and changes gdb and gdbserver to use new and delete. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (windows_add_thread): Use new. (windows_init_thread_list, windows_delete_thread): Use delete. (get_windows_debug_event): Update. * nat/windows-nat.h (struct windows_thread_info): Add constructor, destructor, and initializers. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.c (child_add_thread): Use new. (delete_thread_info): Use delete.
2020-04-08Share windows_thread_info between gdb and gdbserverTom Tromey1-0/+66
This introduces a new file, nat/windows-nat.h, which holds the definition of windows_thread_info. This is now shared between gdb and gdbserver. Note that the two implementations different slightly. gdb had a couple of fields ("name" and "reload_context") that gdbserver did not; while gdbserver had one field ("base_context") that gdb did not, plus better comments. The new file preserves all the fields, and the comments. gdb/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * windows-nat.c (struct windows_thread_info): Remove. * nat/windows-nat.h: New file. gdbserver/ChangeLog 2020-04-08 Tom Tromey <tromey@adacore.com> * win32-low.h (struct windows_thread_info): Remove.
2020-03-20gdb: remove HAVE_DECL_PTRACESimon Marchi1-8/+0
I stumbled on this snippet in nat/gdb_ptrace.h: /* Some systems, in particular DEC OSF/1, Digital Unix, Compaq Tru64 or whatever it's called these days, don't provide a prototype for ptrace. Provide one to silence compiler warnings. */ #ifndef HAVE_DECL_PTRACE extern PTRACE_TYPE_RET ptrace(); #endif I believe this is unnecessary today and should be removed. First, the comment only mentions OSes we don't support (and to be honest, I had never even heard of). But most importantly, in C++, a declaration with empty parenthesis declares a function that accepts no arguments, unlike in C. So if this declaration was really used, GDB wouldn't build, since all ptrace call sites pass some arguments. Since we haven't heard anything about this causing some build failures since we have transitioned to C++, I conclude that it's not used. This patch removes it as well as the corresponding configure check. gdb/ChangeLog: * ptrace.m4: Don't check for ptrace declaration. * config.in: Re-generate. * configure: Re-generate. * nat/gdb_ptrace.h: Don't declare ptrace if HAVE_DECL_PTRACE is not defined. gdbserver/ChangeLog: * config.in: Re-generate. * configure: Re-generate. gdbsupport/ChangeLog: * config.in: Re-generate. * configure: Re-generate.
2020-03-19[AArch64] When unavailable, fetch VG from ptrace.Luis Machado1-3/+18
I was doing some SVE tests on system QEMU and noticed quite a few failures related to inferior function calls. Any attempt to do an inferior function call would result in the following: Unable to set VG register.: Success. This happens because, after an inferior function call, GDB attempts to restore the regcache state and updates the SVE register in order. Since the Z registers show up before the VG register, VG is still INVALID by the time the first Z register is being updated. So when executing the following code in aarch64_sve_set_vq: if (reg_buf->get_register_status (AARCH64_SVE_VG_REGNUM) != REG_VALID) return false; By returning false, we signal something is wrong, then we get to this: /* First store vector length to the thread. This is done first to ensure the ptrace buffers read from the kernel are the correct size. */ if (!aarch64_sve_set_vq (tid, regcache)) perror_with_name (_("Unable to set VG register.")); Ideally we'd always have a valid VG before attempting to set the Z registers, but in this case the ordering of registers doesn't make that possible. I considered reordering the registers to put VG before the Z registers, like the DWARF numbering, but that would break backwards compatibility with existing implementations. Also, the Z register numbering is pinned to the V registers, and adding VG before Z would create a gap for non-SVE targets, since we wouldn't be able to undefine VG for non-SVE targets. As a compromise, it seems we can safely fetch the VG register value from ptrace. The value in the kernel is likely the updated value anyway. This patch fixed all the failures i saw in the testsuite and caused no further regressions. gdb/ChangeLog: 2020-03-19 Luis Machado <luis.machado@linaro.org> * nat/aarch64-sve-linux-ptrace.c (aarch64_sve_set_vq): If vg is not valid, fetch vg value from ptrace.
2020-02-19gdb/riscv: Update API for looking up target descriptionsAndrew Burgess2-7/+8
In preparation for adding the RISC-V gdbserver, this commit restructures the API for looking up target descriptions. The current API is riscv_create_target_description, which creates a target description from a riscv_gdbarch_features, but also caches the created target descriptions so that for a given features object we always get back the same target description object. This is important for GDB due to the way gdbarch objects are reused. As the same target description is always returned to GDB, and can be returned multiple times, it is returned as a const, however, the current cache actually stores a non-const target description. This is improved in this patch so that the cache holds a const target description. For gdbsever, this caching of the target descriptions is not needed, the gdbserver looks up one target description to describe the target it is actually running on and that is it. Further the gdbserver actually needs to modify the target description that is looked up, so for the gdbsever, returning a const target description is not acceptable. This commit aims to address this by creating two parallel target description APIs, on is the old riscv_create_target_description, however, this no longer performs any caching, and just creates a new target description, and returns it as non-const. The second API is riscv_lookup_target_description, this one performs the caching, and calls riscv_create_target_description to create a target description when needed. In order to make sure the correct API is used in the correct place I have guarded the code using the GDBSERVER define. For GDB the riscv_create_target_description is static, and not generally usable throughout GDB, only the lookup API is global. In gdbserver, the lookup functions, and the cache are not defined or created at all, only the riscv_create_target_description API is available. There should be no user visible changes after this commit. gdb/ChangeLog: * arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define if GDBSERVER is not defined. (riscv_tdesc_cache): Likewise, also store const target_desc. (STATIC_IN_GDB): Define. (riscv_create_target_description): Update declaration with STATIC_IN_GDB. (riscv_lookup_target_description): New function, only define if GDBSERVER is not defined. * arch/riscv.h (riscv_create_target_description): Declare only when GDBSERVER is defined. (riscv_lookup_target_description): New declaration when GDBSERVER is not defined. * nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to... (riscv_linux_read_features): ...this, and return riscv_gdbarch_features instead of target_desc. * nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'. (riscv_linux_read_description): Rename to... (riscv_linux_read_features): ...this. * riscv-linux-nat.c (riscv_linux_nat_target::read_description): Update to use riscv_gdbarch_features and riscv_lookup_target_description. * riscv-tdep.c (riscv_find_default_target_description): Use riscv_lookup_target_description instead of riscv_create_target_description.
2020-02-05RISC-V/Linux/native: Factor out target description determinationMaciej W. Rozycki2-0/+110
In preparation for RISC-V/Linux `gdbserver' support factor out parts of native target description determination code that can be shared between the programs. gdb/ * nat/riscv-linux-tdesc.h: New file. * nat/riscv-linux-tdesc.c: New file, taking code from... * riscv-linux-nat.c (riscv_linux_nat_target::read_description): ... here. * configure.nat <linux> <riscv*>: Add nat/riscv-linux-tdesc.o to NATDEPFILES.
2020-01-23gdb: fix darwin-nat.c build / adapt to multi-targetSimon Marchi2-3/+5
The darwin-nat.c file doesn't build since the multi-target changes (5b6d1e4f, "Multi-target support"). This patch makes it build. I have access to a macOS vm, so I am able to build it, but I wasn't able to successfully codesign it and try to actually debug something, so I don't know if it works. I don't have much more time to put on this to figure it out, so I thought I'd sent the patch anyway, as it's at least a step in the right direction. The bulk of the patch is to change a bunch of functions to be methods of the darwin_nat_target object, so that this can pass `this` to find_inferior_ptid and other functions that now require a process_stratum_target pointer. The darwin_ptrace_him function (renamed to darwin_nat_target::ptrace_him in this patch) is passed to fork_inferior as the `init_trace_fun` parameter. Since the method can't be passed as a plain function pointer (we need the `this` pointer), I changed the `init_trace_fun` parameter of fork_inferior to be a gdb::function_view, so we can pass a lambda and capture `this`. The changes in darwin-nat.h are only to move definition higher in the file, so that forward declarations are not needed. gdb/ChangeLog: * darwin-nat.h (struct darwin_exception_msg, enum darwin_msg_state, struct darwin_thread_info, darwin_thread_t): Move up. (class darwin_nat_target) <wait_1, check_new_threads, decode_exception_message, decode_message, stop_inferior, init_thread_list, ptrace_him, cancel_breakpoint>: Declare. * darwin-nat.c (darwin_check_new_threads): Rename to... (darwin_nat_target::check_new_threads): ... this. (darwin_suspend_inferior_it): Remove. (darwin_decode_exception_message): Rename to... (darwin_nat_target::decode_exception_message): ... this. (darwin_nat_target::resume): Pass target to find_inferior_ptid. (darwin_decode_message): Rename to... (darwin_nat_target::decode_message): ... this. (cancel_breakpoint): Rename to... (darwin_nat_target::cancel_breakpoint): ... this. (darwin_wait): Rename to... (darwin_nat_target::wait_1): ... this. Use range-based for loop instead of iterate_over_inferiors. (darwin_nat_target::wait): Call wait_1 instead of darwin_wait. (darwin_stop_inferior): Rename to... (darwin_nat_target::stop_inferior): ... this. (darwin_nat_target::kill): Call wait_1 instead of darwin_wait. (darwin_init_thread_list): Rename to... (darwin_nat_target::init_thread_list): ... this. (darwin_ptrace_him): Rename to... (darwin_nat_target::ptrace_him): ... this. (darwin_nat_target::create_inferior): Pass lambda function to fork_inferior. (darwin_nat_target::detach): Call stop_inferior instead of darwin_stop_inferior. * fork-inferior.h (fork_inferior): Change init_trace_fun parameter to gdb::function_view. * fork-inferior.c (fork_inferior): Likewise.
generated by cgit v1.1 at 2024-08-20 14:24:06 +0000