aboutsummaryrefslogtreecommitdiff
path: root/gdb/nat/linux-ptrace.h
AgeCommit message (Collapse)AuthorFilesLines
2022-02-10gdb/linux: remove ptrace support check for exec, fork, vfork, vforkdone, ↵Simon Marchi1-5/+0
clone, sysgood I think it's safe to remove checking support for these ptrace features, they have all been added in what is now ancient times (around the beginning of Linux 2.6). This allows removing a bit of complexity in linux-nat.c and nat/linux-ptrace.c. It also allows saving one extra fork every time we start debugging on Linux: linux_check_ptrace_features forks a child process to test if some ptrace features are supported. That child process forks a grand-child, to test whether ptrace reports an event for the fork by the child. This is no longer needed, if we assume the kernel supports reporting forks. PTRACE_O_TRACEVFORKDONE was introduced in Linux in this change, in 2003: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=45c1a159b85b3b30afd26a77b4be312226bba416 PTRACE_O_TRACESYSGOOD was supported at least as of this change, in 2002: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=acc7088569c8eef04eeed0eff51d23bb5bcff964 PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK, PTRACE_O_TRACEEXEC and PTRACE_O_TRACECLONE were introduced in this change, in 2002: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=a0691b116f6a4473f0fa264210ab9b95771a2b46 Change-Id: Iffb906549a89cc6b619427f976ec044706ab1e8d
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-09-26Revert "Improve ptrace-error detection on Linux targets"Sergio Durigan Junior1-21/+6
This reverts commit 381beca6146ac68b57edf47d28cdb335fbd11635. The patch hasn't been fully reviewed yet, and Pedro would like to see more fixes.
2019-09-26Improve ptrace-error detection on Linux targetsSergio Durigan Junior1-6/+21
In Fedora GDB, we carry the following patch: https://src.fedoraproject.org/rpms/gdb/blob/8ac06474ff1e2aa4920d14e0666b083eeaca8952/f/gdb-attach-fail-reasons-5of5.patch Its purpose is to try to detect a specific scenario where SELinux's 'deny_ptrace' option is enabled, which prevents GDB from ptrace'ing in order to debug the inferior (PTRACE_ATTACH and PTRACE_TRACEME will fail with EACCES in this case). I like the idea of improving error detection and providing more information to the user (a simple "Permission denied" can be really frustrating), but I don't fully agree with the way the patch was implemented: it makes GDB link against libselinux only for the sake of consulting the 'deny_ptrace' setting, and then prints a warning if ptrace failed and this setting is on. My first thought (and attempt) was to make GDB print a generic warning when a ptrace error happened; this message would just point the user to our documentation, where she could find more information about possible causes for the error (and try to diagnose/fix the problem). This proved to be too simple, and I was convinced that it is actually a good idea to go the extra kilometre and try to pinpoint the specific problem (or problems) preventing ptrace from working, as well as provide useful suggestions on how the user can fix things. Here is the patch I came up with. It implements a new function, 'linux_ptrace_restricted_fail_reason', which does a few things to check what's wrong with ptrace: - It dlopen's "libselinux.so.1" and checks if the "deny_ptrace" option is enabled. - It reads the contents of "/proc/sys/kernel/yama/ptrace_scope" and checks if it's different than 0. For each of these checks, if it succeeds, the user will see a message informing about the restriction in place, and how it can be disabled. For example, if "deny_ptrace" is enabled, the user will see: # gdb /usr/bin/true ... Starting program: /usr/bin/true warning: Could not trace the inferior process. warning: ptrace: Permission denied The SELinux 'deny_ptrace' option is enabled and preventing GDB from using 'ptrace'. You can disable it by executing (as root): setsebool deny_ptrace off If you are debugging the inferior remotely, the ptrace restriction(s) need to be disabled in the target system (e.g., where GDBserver is running). During startup program exited with code 127. (gdb) In case "/proc/sys/kernel/yama/ptrace_scope" is > 0: # gdb /usr/bin/true ... Starting program: /usr/bin/true warning: Could not trace the inferior process. warning: ptrace: Operation not permitted The Linux kernel's Yama ptrace scope is in effect, which can prevent GDB from using 'ptrace'. You can disable it by executing (as root): echo 0 > /proc/sys/kernel/yama/ptrace_scope If you are debugging the inferior remotely, the ptrace restriction(s) need to be disabled in the target system (e.g., where GDBserver is running). During startup program exited with code 127. (gdb) If both restrictions are enabled, both messages will show up. This works for gdbserver as well, and actually fixes a latent bug I found: when ptrace is restricted, gdbserver would hang due to an unchecked ptrace call: # gdbserver :9988 /usr/bin/true gdbserver: linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: Operation not permitted gdbserver: linux_ptrace_test_ret_to_nx: status 256 is not WIFSTOPPED! gdbserver: linux_ptrace_test_ret_to_nx: failed to kill child pid 2668100 No such process [ Here you would have to issue a C-c ] Now, you will see: # gdbserver :9988 /usr/bin/true gdbserver: linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: Permission denied gdbserver: linux_ptrace_test_ret_to_nx: status 256 is not WIFSTOPPED! gdbserver: linux_ptrace_test_ret_to_nx: failed to kill child pid 2766868 No such process gdbserver: Could not trace the inferior process. gdbserver: ptrace: Permission denied The SELinux 'deny_ptrace' option is enabled and preventing GDB from using 'ptrace'. You can disable it by executing (as root): setsebool deny_ptrace off If you are debugging the inferior remotely, the ptrace restriction(s) need to be disabled in the target system (e.g., where GDBserver is running). # (I decided to keep all the other messages, even though I find them a bit distracting). If GDB can't determine the cause for the failure, it will still print the generic error message which tells the user to check our documentation: There might be restrictions preventing ptrace from working. Please see the appendix "Linux kernel ptrace restrictions" in the GDB documentation for more details. If you are debugging the inferior remotely, the ptrace restriction(s) need to be disabled in the target system (e.g., where GDBserver is running). This means that the patch expands our documentation and creates a new appendix section named "Linux kernel ptrace restrictions", with sub-sections for each possible restriction that might be in place. Notice how, on every message, we instruct the user to "do the right thing" if gdbserver is being used. This is because if the user started gdbserver *before* any ptrace restriction was in place, and then, for some reason, one or more restrictions get enabled, then the error message will be displayed both on gdbserver *and* on the connected GDB. Since the user will be piloting GDB, it's important to explicitly say that the ptrace restrictions are enabled in the target, where gdbserver is running. The current list of possible restrictions is: - SELinux's 'deny_ptrace' option (detected). - YAMA's /proc/sys/kernel/yama/ptrace_scope setting (detected). - seccomp on Docker containers (I couldn't find how to detect). It's important to mention that all of this is Linux-specific; as far as I know, SELinux, YAMA and seccomp are Linux-only features. I tested this patch locally, on my Fedora 30 machine (actually, a Fedora Rawhide VM), but I'm not proposing a testcase for it because of the difficulty of writing one. WDYT? gdb/doc/ChangeLog: 2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.texinfo (Linux kernel ptrace restrictions): New appendix section. gdb/ChangeLog: 2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * gdbsupport/gdb-dlfcn.h (gdb_dlopen): Update comment and mention that the function throws an error. * inf-ptrace.c (default_inf_ptrace_me_fail_reason): New function. (inf_ptrace_me_fail_reason): New variable. (inf_ptrace_me): Update call to 'trace_start_error_with_name'. * inf-ptrace.h (inf_ptrace_me_fail_reason): New variable. * linux-nat.c (attach_proc_task_lwp_callback): Call 'linux_ptrace_attach_fail_reason_lwp'. (linux_nat_target::attach): Update call to 'linux_ptrace_attach_fail_reason'. (_initialize_linux_nat): Set 'inf_ptrace_me_fail_reason'. * nat/fork-inferior.c (trace_start_error_with_name): Add optional 'append' argument. * nat/fork-inferior.h (trace_start_error_with_name): Update prototype. * nat/linux-ptrace.c: Include "gdbsupport/gdb-dlfcn.h", "gdbsupport/filestuff.h" and "nat/fork-inferior.h". (selinux_ftype): New typedef. (linux_ptrace_restricted_fail_reason): New function. (linux_ptrace_attach_fail_reason_1): New function. (linux_ptrace_attach_fail_reason): Change first argument type from 'ptid_t' to 'pid_t'. Call 'linux_ptrace_attach_fail_reason_1' and 'linux_ptrace_restricted_fail_reason'. (linux_ptrace_attach_fail_reason_lwp): New function. (linux_ptrace_me_fail_reason): New function. (errno_pipe): New variable. (linux_fork_to_function): Initialize pipe before forking. (linux_child_function): Deal with errno-passing from child. Handle ptrace error. (linux_check_child_ptrace_errno): New function. (linux_check_child_ptrace_errno): Call 'linux_check_child_ptrace_errno'. * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason): Update prototype. (linux_ptrace_attach_fail_reason_lwp): New prototype. (linux_ptrace_me_fail_reason): New prototype. * remote.c (extended_remote_target::attach): Handle error message passed by the server when attach fails. gdb/gdbserver/ChangeLog: 2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com> Pedro Alves <palves@redhat.com> * linux-low.c (linux_ptrace_fun): Call 'linux_ptrace_me_fail_reason'. (attach_proc_task_lwp_callback): Call 'linux_ptrace_attach_fail_reason_lwp'. (linux_attach): Call 'linux_ptrace_attach_fail_reason'. * server.c (handle_v_attach): Use try..catch when calling 'attach_inferior', and send an error message to the client when needed. * thread-db.c (attach_thread): Call 'linux_ptrace_attach_fail_reason_lwp'.
2019-07-09Rename common to gdbsupportTom Tromey1-1/+1
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-02-07Normalize include guards in gdbTom Tromey1-3/+3
While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard.
2019-01-25Normalize includes to use common/Tom Tromey1-1/+1
This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-05-31Fix Alpha native GDB buildUros Bizjak1-5/+0
[Commit log by Simon Marchi] I get this error: CXX linux-nat.o /home/simark/src/binutils-gdb/gdb/linux-nat.c: In function 'void save_stop_reason(lwp_info*)': /home/simark/src/binutils-gdb/gdb/linux-nat.c:2718:9: error: duplicated 'if' condition [-Werror=duplicated-cond] else if (GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code)) ^~ In file included from /home/simark/src/binutils-gdb/gdb/linux-nat.c:31:0: /home/simark/src/binutils-gdb/gdb/nat/linux-ptrace.h:173:41: note: previously used here # define GDB_ARCH_IS_TRAP_BRKPT(X) ((X) == TRAP_BRKPT) ~~~~~^~~~~~~~~~~~~~ /home/simark/src/binutils-gdb/gdb/linux-nat.c:2709:13: note: in expansion of macro 'GDB_ARCH_IS_TRAP_BRKPT' else if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code)) ^~~~~~~~~~~~~~~~~~~~~~ For Alpha, we currently define GDB_ARCH_IS_TRAP_BRKPT and GDB_ARCH_IS_TRAP_HWBKPT both to ((X) == TRAP_BRKPT), which causes the two if branches to be duplicated. Alpha doesn't have hardware breakpoints, so the Linux kernel for Alpha never sets si_code to TRAP_HWBKPT. We can just remove the special definitions of these macros for __alpha__ and rely on the default ones. Since the kernel will never report TRAP_HWBKPT, we will just never enter the "hardware breakpoint" branch on Alpha (which is fine since it doesn't have them). gdb/ChangeLog: * nat/linux-ptrace.h [__alpha__] (GDB_ARCH_IS_TRAP_BRKPT, GDB_ARCH_IS_TRAP_HWBKPT): Remove definitions.
2018-01-19gdb: Fix ia64 defining TRAP_HWBKPT before including gdb_wait.hJames Clarke1-0/+1
On ia64, gdb_wait.h eventually includes siginfo-consts-arch.h, which contains an enum with TRAP_HWBKPT, along with a #define. Thus we cannot define TRAP_HWBKPT to 4 beforehand, and so gdb_wait.h must be included earlier; include it from linux-ptrace.h so it can never come afterwards. gdb/ChangeLog: * nat/linux-ptrace.c: Remove unnecessary reinclusion of gdb_ptrace.h, and move including gdb_wait.h ... * nat/linux-ptrace.h: ... to here.
2018-01-17Make linux_ptrace_attach_fail_reason return an std::stringSimon Marchi1-5/+3
This patch makes linux_ptrace_attach_fail_reason and linux_ptrace_attach_fail_reason_string return std::string. It also replaces usages of struct buffer with std::string. This allows getting rid of a cleanup in in linux_ptrace_attach_fail_reason_string and simplifies the code in general. Something that looks odd to me is that in linux_ptrace_attach_fail_reason, if the two messages are appended, there is no separating space or \n, so the result won't be very nice. I left it as-is for now though. gdb/ChangeLog: * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason): Return std::string. (linux_ptrace_attach_fail_reason_string): Likewise. * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Likewise. (linux_ptrace_attach_fail_reason_string): Likewise. * linux-nat.c (attach_proc_task_lwp_callback): Adjust. gdb/gdbserver/ChangeLog: * linux-low.c (attach_proc_task_lwp_callback): Adjust to linux_ptrace_attach_fail_reason_string now returning an std::string. (linux_attach): Likewise. * thread-db.c (attach_thread): Likewise.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-12-15Fix PR19061, gdb hangs/spins-on-cpu when debugging any program on AlphaRichard Henderson1-0/+5
This fixes PR19061, where gdb hangs/spins-on-cpu when debugging any program on Alpha. (This patch is Uros' forward port of the patch from comment #5 of the PR [1].) Patch was tested on alphaev68-linux-gnu, also tested with gcc's testsuite, where it fixed all hangs in guality.exp and simulate-thread.exp testcases. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=19061#c5 gdb/ChangeLog: 2017-12-15 Richard Henderson <rth@redhat.com> Uros Bizjak <ubizjak@gmail.com> PR gdb/19061 * alpha-tdep.c (alpha_software_single_step): Call alpha_deal_with_atomic_sequence here. (set_gdbarch_software_single_step): Set to alpha_software_single_step. * nat/linux-ptrace.h [__alpha__]: Define GDB_ARCH_IS_TRAP_BRKPT and GDB_ARCH_IS_TRAP_HWBKPT.
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-04-15MIPS/Linux: Also recognize TRAP_BRKPT and TRAP_HWBKPTPedro Alves1-4/+7
This makes the MIPS Linux backends recognize TRAP_BRKPT and TRAP_HWBKPT in siginfo.si_code in addition to SI_KERNEL, since Linux 4.6 now reports the finer-grained si_code values too. Refs: https://sourceware.org/ml/gdb-patches/2016-02/msg00756.html https://sourceware.org/ml/gdb-patches/2016-04/msg00090.html On kernels that report SI_KERNEL (<= 4.5), we'll enter the "ambiguous" path of save_stop_reason: if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code) && GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code)) { /* The si_code is ambiguous on this arch -- check debug registers. */ if (!check_stopped_by_watchpoint (lp)) lp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; } while on kernels that report the finer-grained si_code values (>= 4.6), we'll enter the corresponding branches: else if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code)) { } else if (GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code)) { ... gdb/ChangeLog: 2016-04-15 Pedro Alves <palves@redhat.com> * nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also accept TRAP_BRKPT. [__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.
2016-02-24Handle MIPS Linux SIGTRAP siginfo.si_code valuesPedro Alves1-10/+28
This unbreaks pending/delayed breakpoints handling, as well as hardware watchpoints, on MIPS. Ref: https://sourceware.org/ml/gdb-patches/2016-02/msg00681.html The MIPS kernel reports SI_KERNEL for all kernel generated traps, instead of TRAP_BRKPT / TRAP_HWBKPT, but GDB isn't aware of this. Basically, this commit: - Folds watchpoints logic into check_stopped_by_breakpoint, and renames it to save_stop_reason. - Adds GDB_ARCH_IS_TRAP_HWBKPT. - Makes MIPS set both GDB_ARCH_IS_TRAP_BRPT and GDB_ARCH_IS_TRAP_HWBKPT to SI_KERNEL. In save_stop_reason, we handle the case of the same si_code returning true for both TRAP_BRPT and TRAP_HWBKPT by looking at what the debug registers say. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2016-02-24 Pedro Alves <palves@redhat.com> * linux-nat.c (save_sigtrap) Delete. (stop_wait_callback): Call save_stop_reason instead of save_sigtrap. (check_stopped_by_breakpoint): Rename to ... (save_stop_reason): ... this. Bits of save_sigtrap folded here. Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out common code between the USE_SIGTRAP_SIGINFO and !USE_SIGTRAP_SIGINFO blocks. (linux_nat_filter_event): Call save_stop_reason instead of save_sigtrap. * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT si_code for MIPS. * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add comments on MIPS behavior. (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs. gdb/gdbserver/ChangeLog: 2016-02-24 Pedro Alves <palves@redhat.com> * linux-low.c (check_stopped_by_breakpoint): Rename to ... (save_stop_reason): ... this. Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out common code between the USE_SIGTRAP_SIGINFO and !USE_SIGTRAP_SIGINFO blocks. (linux_low_filter_event): Call save_stop_reason instead of check_stopped_by_breakpoint and check_stopped_by_watchpoint. Update comments. (linux_wait_1): Update comments.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-09-11Extended-remote follow-execDon Breazeal1-0/+1
This patch implements support for exec events on extended-remote Linux targets. Follow-exec-mode and rerun behave as expected. Catchpoints and test updates are implemented in subsequent patches. This patch was derived from a patch posted last October: https://sourceware.org/ml/gdb-patches/2014-10/msg00877.html. It was originally based on some work done by Luis Machado in 2013. IMPLEMENTATION ---------------- Exec events are enabled via ptrace options. When an exec event is detected by gdbserver, the existing process data, along with all its associated lwp and thread data, is deleted and replaced by data for a new single-threaded process. The new process data is initialized with the appropriate parts of the state of the execing process. This approach takes care of several potential pitfalls, including: * deleting the data for an execing non-leader thread before any wait/sigsuspend occurs * correctly initializing the architecture of the execed process We then report the exec event using a new RSP stop reason, "exec". When GDB receives an "exec" event, it saves the status in the event structure's target_waitstatus field, like what is done for remote fork events. Because the original and execed programs may have different architectures, we skip parsing the section of the stop reply packet that contains register data. The register data will be retrieved later after the inferior's architecture has been set up by infrun.c:follow_exec. At that point the exec event is handled by the existing event handling in GDB. However, a few changes were necessary so that infrun.c:follow_exec could accommodate the remote target. * Where follow-exec-mode "new" is handled, we now call add_inferior_with_spaces instead of add_inferior with separate calls to set up the program and address spaces. The motivation for this is that add_inferior_with_spaces also sets up the initial architecture for the inferior, which is needed later by target_find_description when it calls target_gdbarch. * We call a new target function, target_follow_exec. This function allows us to store the execd_pathname in the inferior, instead of using the static string remote_exec_file from remote.c. The static string didn't work for follow-exec-mode "new", since once you switched to the execed program, the original remote exec-file was lost. The execd_pathname is now stored in the inferior's program space as a REGISTRY field. All of the requisite mechanisms for this are defined in remote.c. gdb/gdbserver/ChangeLog: * linux-low.c (linux_mourn): Static declaration. (linux_arch_setup): Move in front of handle_extended_wait. (linux_arch_setup_thread): New function. (handle_extended_wait): Handle exec events. Call linux_arch_setup_thread. Make event_lwp argument a pointer-to-a-pointer. (check_zombie_leaders): Do not check stopped threads. (linux_low_ptrace_options): Add PTRACE_O_TRACEEXEC. (linux_low_filter_event): Add lwp and thread for exec'ing non-leader thread if leader thread has been deleted. Refactor code into linux_arch_setup_thread and call it. Pass child lwp pointer by reference to handle_extended_wait. (linux_wait_for_event_filtered): Update comment. (linux_wait_1): Prevent clobbering exec event status. (linux_supports_exec_events): New function. (linux_target_ops) <supports_exec_events>: Initialize new member. * lynx-low.c (lynx_target_ops) <supports_exec_events>: Initialize new member. * remote-utils.c (prepare_resume_reply): New stop reason 'exec'. * server.c (report_exec_events): New global variable. (handle_query): Handle qSupported query for exec-events feature. (captured_main): Initialize report_exec_events. * server.h (report_exec_events): Declare new global variable. * target.h (struct target_ops) <supports_exec_events>: New member. (target_supports_exec_events): New macro. * win32-low.c (win32_target_ops) <supports_exec_events>: Initialize new member. gdb/ChangeLog: * infrun.c (follow_exec): Use process-style ptid for exec message. Call add_inferior_with_spaces and target_follow_exec. * nat/linux-ptrace.c (linux_supports_traceexec): New function. * nat/linux-ptrace.h (linux_supports_traceexec): Declare. * remote.c (remote_pspace_data): New static variable. (remote_pspace_data_cleanup): New function. (get_remote_exec_file): New function. (set_remote_exec_file_1): New function. (set_remote_exec_file): New function. (show_remote_exec_file): New function. (remote_exec_file): Delete static variable. (anonymous enum) <PACKET_exec_event_feature> New enumeration constant. (remote_protocol_features): Add entry for exec-events feature. (remote_query_supported): Add client side of qSupported query for exec-events feature. (remote_follow_exec): New function. (remote_parse_stop_reply): Handle 'exec' stop reason. (extended_remote_run, extended_remote_create_inferior): Call get_remote_exec_file and set_remote_exec_file_1. (init_extended_remote_ops) <to_follow_exec>: Initialize new member. (_initialize_remote): Call register_program_space_data_with_cleanup. Call add_packet_config_cmd for remote exec-events feature. Modify call to add_setshow_string_noescape_cmd for exec-file to use new functions set_remote_exec_file and show_remote_exec_file. * target-debug.h, target-delegates.c: Regenerated. * target.c (target_follow_exec): New function. * target.h (struct target_ops) <to_follow_exec>: New member. (target_follow_exec): Declare new function.
2015-08-27Detect SW breakpoints in Cell/B.E. combined debuggingUlrich Weigand1-4/+11
The Linux target and gdbserver now check the siginfo si_code reported on a SIGTRAP to detect whether the trap indicates a software breakpoint was hit. Unfortunately, on Cell/B.E., the kernel uses an si_code value of TRAP_BRKPT when a SW breakpoint was hit in PowerPC code, but a si_code value of SI_KERNEL when a SW breakpoint was hit in SPU code. This patch updates Linux target and gdbserver to accept both si_code values to indicate SW breakpoint on PowerPC. ChangeLog: * nat/linux-ptrace.h (GDB_ARCH_TRAP_BRKPT): Replace by ... (GDB_ARCH_IS_TRAP_BRKPT): ... this. Add __powerpc__ case. * linux-nat.c (check_stopped_by_breakpoint): Use GDB_ARCH_IS_TRAP_BRKPT instead of GDB_ARCH_TRAP_BRKPT. gdbserver/ChangeLog: * linux-low.c (check_stopped_by_breakpoint): Use GDB_ARCH_IS_TRAP_BRKPT instead of GDB_ARCH_TRAP_BRKPT.
2015-07-24Linux: sys/ptrace.h -> nat/gdb_ptrace.h everywherePedro Alves1-1/+1
So that we pick the enum __ptrace_request fix everywhere. gdb/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of sys/ptrace.h. * alpha-linux-nat.c: Likewise. * amd64-linux-nat.c: Likewise. * arm-linux-nat.c: Likewise. * hppa-linux-nat.c: Likewise. * i386-linux-nat.c: Likewise. * ia64-linux-nat.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * m32r-linux-nat.c: Likewise. * m68klinux-nat.c: Likewise. * mips-linux-nat.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-ptrace.h * nat/mips-linux-watch.c: Likewise. * nat/x86-linux-dregs.c: Likewise. * ppc-linux-nat.c: Likewise. * s390-linux-nat.c: Likewise. * spu-linux-nat.c: Likewise. * tilegx-linux-nat.c: Likewise. * x86-linux-nat.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.c: Likewise.om> * linux-aarch64-low.c: Include nat/gdb_ptrace.h instead of sys/ptrace.h. * linux-arm-low.c: Likewise. * linux-cris-low.c: Likewise. * linux-crisv32-low.c: Likewise. * linux-low.c: Likewise. * linux-m68k-low.c: Likewise. * linux-mips-low.c: Likewise. * linux-nios2-low.c: Likewise. * linux-s390-low.c: Likewise. * linux-sparc-low.c: Likewise. * linux-tic6x-low.c: Likewise. * linux-tile-low.c: Likewise. * linux-x86-low.c: Likewise.
2015-06-01Move PTRACE_GETREGSET and PTRACE_SETREGSET to nat/linux-ptrace.hYao Qi1-0/+8
Macros PTRACE_GETREGSET and PTRACE_SETREGSET are defined locally in some places in GDB and GDBserver. This patch is to move them to nat/linux-ptrace.h to avoid duplication. gdb: 2015-06-01 Yao Qi <yao.qi@linaro.org> * amd64-linux-nat.c: Include "nat/linux-ptrace.h". * i386-linux-nat.c: Likewise. * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define. * s390-linux-nat.c: Include "nat/linux-ptrace.h". (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove. * x86-linux-nat.c: Include "nat/linux-ptrace.h". * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove. gdb/gdbserver: 2015-06-01 Yao Qi <yao.qi@linaro.org> * linux-s390-low.c (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove. * linux-x86-low.c: Likewise.
2015-05-12Extended-remote Linux follow forkDon Breazeal1-1/+0
This patch implements basic support for follow-fork and detach-on-fork on extended-remote Linux targets. Only 'fork' is supported in this patch; 'vfork' support is added n a subsequent patch. This patch depends on the previous patches in the patch series. Sufficient extended-remote functionality has been implemented here to pass gdb.base/multi-forks.exp, as well as gdb.base/foll-fork.exp with the catchpoint tests commented out. Some other fork tests fail with this patch because it doesn't provide the architecture support needed for watchpoint inheritance or fork catchpoints. The implementation follows the same general structure as for the native implementation as much as possible. This implementation includes: * enabling fork events in linux-low.c in initialize_low and linux_enable_extended_features * handling fork events in gdbserver/linux-low.c:handle_extended_wait - when a fork event occurs in gdbserver, we must do the full creation of the new process, thread, lwp, and breakpoint lists. This is required whether or not the new child is destined to be detached-on-fork, because GDB will make target calls that require all the structures. In particular we need the breakpoint lists in order to remove the breakpoints from a detaching child. If we are not detaching the child we will need all these structures anyway. - as part of this event handling we store the target_waitstatus in a new member of the parent lwp_info structure, 'waitstatus'. This is used to store extended event information for reporting to GDB. - handle_extended_wait is given a return value, denoting whether the handled event should be reported to GDB. Previously it had only handled clone events, which were never reported. * using a new predicate in gdbserver to control handling of the fork event (and eventually all extended events) in linux_wait_1. The predicate, extended_event_reported, checks a target_waitstatus.kind for an extended ptrace event. * implementing a new RSP 'T' Stop Reply Packet stop reason: "fork", in gdbserver/remote-utils.c and remote.c. * implementing new target and RSP support for target_follow_fork with target extended-remote. (The RSP components were actually defined in patch 1, but they see their first use here). - remote target routine remote_follow_fork, which just sends the 'D;pid' detach packet to detach the new fork child cleanly. We can't just call target_detach because the data structures for the forked child have not been allocated on the host side. Tested on x64 Ubuntu Lucid, native, remote, extended-remote. gdb/gdbserver/ChangeLog: * linux-low.c (handle_extended_wait): Implement return value, rename argument 'event_child' to 'event_lwp', handle PTRACE_EVENT_FORK, call internal_error for unrecognized event. (linux_low_ptrace_options): New function. (linux_low_filter_event): Call linux_low_ptrace_options, use different argument fo linux_enable_event_reporting, use return value from handle_extended_wait. (extended_event_reported): New function. (linux_wait_1): Call extended_event_reported and set status to report fork events. (linux_write_memory): Add pid to debug message. (reset_lwp_ptrace_options_callback): New function. (linux_handle_new_gdb_connection): New function. (linux_target_ops): Initialize new structure member. * linux-low.h (struct lwp_info) <waitstatus>: New member. * lynx-low.c: Initialize new structure member. * remote-utils.c (prepare_resume_reply): Implement stop reason "fork" for "T" stop message. * server.c (handle_query): Call handle_new_gdb_connection. * server.h (report_fork_events): Declare global flag. * target.h (struct target_ops) <handle_new_gdb_connection>: New member. (target_handle_new_gdb_connection): New macro. * win32-low.c: Initialize new structure member. gdb/ChangeLog: * linux-nat.c (linux_nat_ptrace_options): New function. (linux_init_ptrace, wait_lwp, linux_nat_filter_event): Call linux_nat_ptrace_options and use different argument to linux_enable_event_reporting. (_initialize_linux_nat): Delete call to linux_ptrace_set_additional_flags. * nat/linux-ptrace.c (current_ptrace_options): Rename to supported_ptrace_options. (additional_flags): Delete variable. (linux_check_ptrace_features): Use supported_ptrace_options. (linux_test_for_tracesysgood, linux_test_for_tracefork): Likewise, and remove additional_flags check. (linux_enable_event_reporting): Change 'attached' argument to 'options'. Use supported_ptrace_options. (ptrace_supports_feature): Change comment. Use supported_ptrace_options. (linux_ptrace_set_additional_flags): Delete function. * nat/linux-ptrace.h (linux_ptrace_set_additional_flags): Delete function prototype. * remote.c (remote_fork_event_p): New function. (remote_detach_pid): New function. (remote_detach_1): Call remote_detach_pid, don't mourn inferior if doing detach-on-fork. (remote_follow_fork): New function. (remote_parse_stop_reply): Handle new "T" stop reason "fork". (remote_pid_to_str): Print "process" strings for pid/0/0 ptids. (init_extended_remote_ops): Initialize to_follow_fork.
2015-05-12Identify remote fork event supportDon Breazeal1-0/+1
This patch implements a mechanism for GDB to determine whether fork events are supported in gdbserver. This is a preparatory patch for remote fork and exec event support. Two new RSP packets are defined to represent fork and vfork event support. These packets are used just like PACKET_multiprocess_feature to denote whether the corresponding event is supported. GDB sends fork-events+ and vfork-events+ to gdbserver to inquire about fork event support. If the response enables these packets, then GDB knows that gdbserver supports the corresponding events and will enable them. Target functions used to query for support are included along with each new packet. In order for gdbserver to know whether the events are supported at the point where the qSupported packet arrives, the code in nat/linux-ptrace.c had to be reorganized. Previously it would test for fork/exec event support, then enable the events using the pid of the inferior. When the qSupported packet arrives there may not be an inferior. So the mechanism was split into two parts: a function that checks whether the events are supported, called when gdbserver starts up, and another that enables the events when the inferior stops for the first time. Another gdbserver change was to add some global variables similar to multi_process, one per new packet. These are used to control whether the corresponding fork events are enabled. If GDB does not inquire about the event support in the qSupported packet, then gdbserver will not set these "report the event" flags. If the flags are not set, the events are ignored like they were in the past. Thus, gdbserver will never send fork event notification to an older GDB that doesn't recognize fork events. Tested on Ubuntu x64, native/remote/extended-remote, and as part of subsequent patches in the series. gdb/gdbserver/ChangeLog: * linux-low.c (linux_supports_fork_events): New function. (linux_supports_vfork_events): New function. (linux_target_ops): Initialize new structure members. (initialize_low): Call linux_check_ptrace_features. * lynx-low.c (lynx_target_ops): Initialize new structure members. * server.c (report_fork_events, report_vfork_events): New global flags. (handle_query): Add new features to qSupported packet and response. (captured_main): Initialize new global variables. * target.h (struct target_ops) <supports_fork_events>: New member. <supports_vfork_events>: New member. (target_supports_fork_events): New macro. (target_supports_vfork_events): New macro. * win32-low.c (win32_target_ops): Initialize new structure members. gdb/ChangeLog: * nat/linux-ptrace.c (linux_check_ptrace_features): Change from static to extern. * nat/linux-ptrace.h (linux_check_ptrace_features): Declare. * remote.c (anonymous enum): <PACKET_fork_event_feature, * PACKET_vfork_event_feature>: New enumeration constants. (remote_protocol_features): Add table entries for new packets. (remote_query_supported): Add new feature queries to qSupported packet. (_initialize_remote): Exempt new packets from the requirement to have 'set remote' commands.
2015-03-04Linux native: Use TRAP_BRKPT/TRAP_HWBPTPedro Alves1-0/+51
This patch adjusts the native Linux target backend to tell the core whether a trap was caused by a breakpoint. It teaches the target to get that information out of the si_code of the SIGTRAP siginfo. Tested on x86-64 Fedora 20, s390 RHEL 7, and PPC64 Fedora 18. An earlier version was tested on ARM Fedora 21. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * linux-nat.c (save_sigtrap): Check for breakpoints before checking watchpoints. (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a breakpoint is inserted if relying on SIGTRAP's siginfo.si_code. (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether a breakpoint triggered based on the SIGTRAP's siginfo.si_code. (linux_nat_stopped_by_sw_breakpoint) (linux_nat_supports_stopped_by_sw_breakpoint) (linux_nat_stopped_by_hw_breakpoint) (linux_nat_supports_stopped_by_hw_breakpoint): New functions. (linux_nat_wait_1): Don't re-increment the PC if relying on SIGTRAP's siginfo->si_code. (linux_nat_add_target): Install new target methods. * linux-thread-db.c (check_event): Don't account for breakpoint PC offset if the target already adjusted the PC. * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New. (GDB_ARCH_TRAP_BRKPT): New. (TRAP_HWBKPT): Define if not already defined.
2015-02-19Fix non executable stack handling when calling functions in the inferior.Antoine Tremblay1-0/+1
When gdb creates a dummy frame to execute a function in the inferior, the process may generate a SIGSEGV, SIGTRAP or SIGILL because the stack is non executable. If the signal handler set in gdb has option print or stop enabled for these signals gdb handles this correctly. However, in the case of noprint and nostop the signal is short-circuited and the inferior process is sent the signal directly. This causes the inferior to crash because of gdb. This patch adds a check for SIGSEGV, SIGTRAP or SIGILL so that these signals are sent to gdb rather than short-circuited in the inferior. gdb then handles them properly and the inferior process does not crash. This patch also fixes the same behavior in gdbserver. Also added a small testcase to test the issue called catch-gdb-caused-signals. This applies to Linux only, tested on Linux. gdb/ChangeLog: PR breakpoints/16812 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV. * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add. * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint. gdb/gdbserver/ChangeLog: PR breakpoints/16812 * linux-low.c (wstatus_maybe_breakpoint): Remove. (linux_low_filter_event): Update wstatus_maybe_breakpoint name. (linux_wait_1): Report SIGTRAP,SIGILL,SIGSEGV. gdb/testsuite/ChangeLog: PR breakpoints/16812 * gdb.base/catch-gdb-caused-signals.c: New file. * gdb.base/catch-gdb-caused-signals.exp: New file.
2015-01-09Linux: on attach, attach to lwps listed under /proc/$pid/task/Pedro Alves1-0/+8
... instead of relying on libthread_db. I wrote a test that attaches to a program that constantly spawns short-lived threads, which exposed several issues. This is one of them. On Linux, we need to attach to all threads of a process (thread group) individually. We currently rely on libthread_db to list the threads, but that is problematic, because libthread_db relies on reading data structures out of the inferior (which may well be corrupted). If threads are being created or exiting just while we try to attach, we may trip on inconsistencies in the inferior's thread list. To work around that, when we see a seemingly corrupt list, we currently retry a few times: static void thread_db_find_new_threads_2 (ptid_t ptid, int until_no_new) { ... if (until_no_new) { /* Require 4 successive iterations which do not find any new threads. The 4 is a heuristic: there is an inherent race here, and I have seen that 2 iterations in a row are not always sufficient to "capture" all threads. */ ... That heuristic may well fail, and when it does, we end up with threads in the program that aren't under GDB's control. That's obviously bad and results in quite mistifying failures, like e.g., the process dying for seeminly no reason when a thread that wasn't attached trips on a breakpoint. There's really no reason to rely on libthread_db for this nowadays when we have /proc mounted. In that case, which is the usual case, we can list the LWPs from /proc/PID/task/. In fact, GDBserver is already doing this. The patch factors out that code that knows to walk the task/ directory out of GDBserver, and makes GDB use it too. Like GDBserver, the patch makes GDB attach to LWPs and _not_ wait for them to stop immediately. Instead, we just tag the LWP as having an expected stop. Because we can only set the ptrace options when the thread stops, we need a new flag in the lwp structure to keep track of whether we've already set the ptrace options, just like in GDBserver. Note that nothing issues any ptrace command to the threads between the PTRACE_ATTACH and the stop, so this is safe (unlike one scenario described in gdbserver's linux-low.c). When we attach to a program that has threads exiting while we attach, it's easy to race with a thread just exiting as we try to attach to it, like: #1 - get current list of threads #2 - attach to each listed thread #3 - ooops, attach failed, thread is already gone As this is pretty normal, we shouldn't be issuing a scary warning in step #3. When #3 happens, PTRACE_ATTACH usually fails with ESRCH, but sometimes we'll see EPERM as well. That happens when the kernel still has the thread in its task list, but the thread is marked as dead. Unfortunately, EPERM is ambiguous and we'll get it also on other scenarios where the thread isn't dead, and in those cases, it's useful to get a warning. To distiguish the cases, when we get an EPERM failure, we open /proc/PID/status, and check the thread's state -- if the /proc file no longer exists, or the state is "Z (Zombie)" or "X (Dead)", we ignore the EPERM error silently; otherwise, we'll warn. Unfortunately, there seems to be a kernel race here. Sometimes I get EPERM, and then the /proc state still indicates "R (Running)"... If we wait a bit and retry, we do end up seeing X or Z state, or get an ESRCH. I thought of making GDB retry the attach a few times, but even with a 500ms wait and 4 retries, I still see the warning sometimes. I haven't been able to identify the kernel path that causes this yet, but in any case, it looks like a kernel bug to me. As this just results failure to suppress a warning that we've been printing since about forever anyway, I'm just making the test cope with it, and issue an XFAIL. gdb/gdbserver/ 2015-01-09 Pedro Alves <palves@redhat.com> * linux-low.c (linux_attach_fail_reason_string): Move to nat/linux-ptrace.c, and rename. (linux_attach_lwp): Update comment. (attach_proc_task_lwp_callback): New function. (linux_attach): Adjust to rename and use linux_proc_attach_tgid_threads. (linux_attach_fail_reason_string): Delete declaration. gdb/ 2015-01-09 Pedro Alves <palves@redhat.com> * linux-nat.c (attach_proc_task_lwp_callback): New function. (linux_nat_attach): Use linux_proc_attach_tgid_threads. (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's ptrace option flags. * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New field. * nat/linux-procfs.c: Include <dirent.h>. (linux_proc_get_int): New parameter "warn". Handle it. (linux_proc_get_tgid): Adjust. (linux_proc_get_tracerpid): Rename to ... (linux_proc_get_tracerpid_nowarn): ... this. (linux_proc_pid_get_state): New function, factored out from (linux_proc_pid_has_state): ... this. Add new parameter "warn" and handle it. (linux_proc_pid_is_gone): New function. (linux_proc_pid_is_stopped): Adjust. (linux_proc_pid_is_zombie_maybe_warn) (linux_proc_pid_is_zombie_nowarn): New functions. (linux_proc_pid_is_zombie): Use linux_proc_pid_is_zombie_maybe_warn. (linux_proc_attach_tgid_threads): New function. * nat/linux-procfs.h (linux_proc_get_tgid): Update comment. (linux_proc_get_tracerpid): Rename to ... (linux_proc_get_tracerpid_nowarn): ... this, and update comment. (linux_proc_pid_is_gone): New declaration. (linux_proc_pid_is_zombie): Update comment. (linux_proc_pid_is_zombie_nowarn): New declaration. (linux_proc_attach_lwp_func): New typedef. (linux_proc_attach_tgid_threads): New declaration. * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to use nowarn functions. (linux_ptrace_attach_fail_reason_string): Move here from gdbserver/linux-low.c and rename. (ptrace_supports_feature): If the current ptrace options are not known yet, check them now, instead of asserting. * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string): Declare.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-12-16[Linux] Ask kernel to kill inferior when GDB terminatesJoel Brobecker1-1/+6
This patch enhances GDB on GNU/Linux systems in the situation where we are debugging an inferior that was created from GDB (as opposed to attached to), by asking the kernel to kill the inferior if GDB terminates without doing it itself. This would typically happen when GDB encounters a problem and crashes, or when it gets killed by an external process. This can be observed by starting a program under GDB, and then killing GDB with signal 9. After GDB is killed, the inferior still remains. This patch also fixes GDBserver similarly. This fix is conditional on the kernel supporting the PTRACE_O_EXITKILL feature. On older kernels, the behavior remains unchanged. gdb/ChangeLog: * nat/linux-ptrace.h (PTRACE_O_EXITKILL): Define if not already defined. (linux_enable_event_reporting): Add parameter "attached". * nat/linux-ptrace.c (linux_test_for_exitkill): New forward declaration. New function. (linux_check_ptrace_features): Add linux_test_for_exitkill call. (linux_enable_event_reporting): Add new parameter "attached". Do not call ptrace with the PTRACE_O_EXITKILL if ATTACHED is nonzero. * linux-nat.c (linux_init_ptrace): Add parameter "attached". Use it. Update function description. (linux_child_post_attach, linux_child_post_startup_inferior): Update call to linux_enable_event_reporting. gdb/gdbserver/ChangeLog: * linux-low.c (linux_low_filter_event): Update call to linux_enable_event_reporting following the addition of a new parameter to that function. Tested on x86_64-linux, native and native-gdbserver. I also verified by hand that the inferior gets killed when killing GDB in the "run" case, while the inferior remains in the "attach" case. Same for GDBserver.
2014-09-19Refactor ptrace extended event status.Don Breazeal1-0/+2
This commit implements functions for identifying and extracting extended ptrace event information from a Linux wait status. These are just convenience functions intended to hide the ">> 16" used to extract the event from the wait status word, replacing the hard-coded shift with a more descriptive function call. This is preparatory work for implementation of follow-fork and detach-on-fork for extended-remote linux targets. gdb/ChangeLog: * linux-nat.c (linux_handle_extended_wait): Call linux_ptrace_get_extended_event. (wait_lwp): Call linux_is_extended_waitstatus. (linux_nat_filter_event): Call linux_ptrace_get_extended_event and linux_is_extended_waitstatus. * nat/linux-ptrace.c (linux_test_for_tracefork): Call linux_ptrace_get_extended_event. (linux_ptrace_get_extended_event): New function. (linux_is_extended_waitstatus): New function. * nat/linux-ptrace.h (linux_ptrace_get_extended_event) (linux_is_extended_waitstatus): New declarations. gdb/gdbserver/ChangeLog: * linux-low.c (handle_extended_wait): Call linux_ptrace_get_extended_event. (get_stop_pc, get_detach_signal, linux_low_filter_event): Call linux_is_extended_waitstatus. ---
2014-07-24Remove some GDBSERVER checks from linux-ptraceTom Tromey1-0/+1
This patch removes some GDBSERVER checks from nat/linux-ptrace.c. Currently the code uses a compile-time check to decide whether some flags should be used. This changes the code to instead let users of the module specify an additional set of flags; and then changes gdb's linux-nat.c to call this function. At some later date, when the back ends are fully merged, we will be able to remove this function again. gdb/ 2014-07-24 Tom Tromey <tromey@redhat.com> Gary Benson <gbenson@redhat.com> * nat/linux-ptrace.c (additional_flags): New global. (linux_test_for_tracesysgood, linux_test_for_tracefork): Use additional_flags; don't check GDBSERVER. (linux_ptrace_set_additional_flags): New function. * nat/linux-ptrace.h (linux_ptrace_set_additional_flags): Declare. * linux-nat.c (_initialize_linux_nat): Call linux_ptrace_set_additional_flags.
2014-06-20Move shared native target specific code to gdb/natGary Benson1-0/+95
https://sourceware.org/gdb/wiki/Common describes the following directory structure: gdb/nat/ Native target backend files. Code that interfaces with the host debug API. E.g., ptrace code, Windows debug API code, procfs code should go here. gdb/target/ Host-independent, target vector specific code (target_ops). gdb/common/ All other shared code. This commit moves all native target backend files currently in gdb/common to gdb/nat. gdb/ 2014-06-20 Gary Benson <gbenson@redhat.com> * common/gdb_thread_db.h: Moved to nat. All includes updated. * common/glibc_thread_db.h: Likewise. * common/i386-cpuid.h: Likewise. * common/i386-gcc-cpuid.h: Likewise. * common/linux-btrace.h: Likewise. * common/linux-osdata.h: Likewise. * common/linux-procfs.h: Likewise. * common/linux-ptrace.h: Likewise. * common/mips-linux-watch.h: Likewise. * common/linux-btrace.c: Moved to nat. * common/linux-osdata.c: Likewise. * common/linux-procfs.c: Likewise. * common/linux-ptrace.c: Likewise. * common/mips-linux-watch.c: Likewise. * nat/gdb_thread_db.h: Moved from common. * nat/glibc_thread_db.h: Likewise. * nat/i386-cpuid.h: Likewise. * nat/i386-gcc-cpuid.h: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-btrace.h: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-osdata.h: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-procfs.h: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-ptrace.h: Likewise. * nat/mips-linux-watch.c: Likewise. * nat/mips-linux-watch.h: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Reflect new locations. (object file files): Reordered. * gdb/copyright.py (EXCLUDE_LIST): Reflect new location of glibc_thread_db.h. gdb/gdbserver/ 2014-06-20 Gary Benson <gbenson@redhat.com> * Makefile.in (SFILES): Update locations for files moved from common to nat. (object file files): Reordered. gdb/testsuite/ 2014-06-20 Gary Benson <gbenson@redhat.com> * gdb.arch/i386-avx.exp: Fix include file location. * gdb.arch/i386-sse.exp: Likewise.
generated by cgit v1.1 at 2024-11-29 04:33:15 +0000