aboutsummaryrefslogtreecommitdiff
path: root/gdb/mips-linux-tdep.c
AgeCommit message (Collapse)AuthorFilesLines
2019-09-19bfd_section_* macrosAlan Modra1-1/+1
This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.
2019-07-09Rename common to gdbsupportTom Tromey1-2/+2
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-01-25Normalize includes to use common/Tom Tromey1-1/+1
This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-08-27Avoid -Wnarrowing warnings in struct tramp_frame instancesTom Tromey1-32/+32
This avoids -Wnarrowing warnings in struct tramp_frame instances, replacing uses of -1 with a new ULONGEST_MAX. It also redefined TRAMP_SENTINEL_INSN to avoid the same warning. gdb/ChangeLog 2018-08-27 Tom Tromey <tom@tromey.com> * tramp-frame.h (TRAMP_SENTINEL_INSN): Redefine. * tilegx-linux-tdep.c (tilegx_linux_rt_sigframe): Use ULONGEST_MAX. * tic6x-linux-tdep.c (tic6x_linux_rt_sigreturn_tramp_frame): Use ULONGEST_MAX. * sparc64-linux-tdep.c (sparc64_linux_rt_sigframe): Use ULONGEST_MAX. * sparc-linux-tdep.c (sparc32_linux_sigframe) (sparc32_linux_rt_sigframe): Use ULONGEST_MAX. * ppc-nbsd-tdep.c (ppcnbsd_sigtramp, ppcnbsd2_sigtramp): Use ULONGEST_MAX. * ppc-linux-tdep.c (ppc32_linux_sigaction_tramp_frame) (ppc64_linux_sigaction_tramp_frame) (ppc32_linux_sighandler_tramp_frame) (ppc64_linux_sighandler_tramp_frame): Use ULONGEST_MAX. * nios2-linux-tdep.c (nios2_r1_linux_rt_sigreturn_tramp_frame) (nios2_r2_linux_rt_sigreturn_tramp_frame): Use ULONGEST_MAX. * mn10300-linux-tdep.c (am33_linux_sigframe) (am33_linux_rt_sigframe): Use ULONGEST_MAX. * mips64-obsd-tdep.c (mips64obsd_sigframe): Use ULONGEST_MAX. * mips-linux-tdep.c (mips_linux_o32_sigframe) (mips_linux_o32_rt_sigframe, mips_linux_n32_rt_sigframe) (mips_linux_n64_rt_sigframe, micromips_linux_o32_sigframe) (micromips_linux_o32_rt_sigframe, micromips_linux_n32_rt_sigframe) (micromips_linux_n64_rt_sigframe): Use ULONGEST_MAX. * mips-fbsd-tdep.c (mips_fbsd_sigframe, mipsn32_fbsd_sigframe) (mips64_fbsd_sigframe): Use ULONGEST_MAX. * microblaze-linux-tdep.c (microblaze_linux_sighandler_tramp_frame): Use ULONGEST_MAX. * i386-nbsd-tdep.c (i386nbsd_sigtramp_sc16, i386nbsd_sigtramp_sc2) (i386nbsd_sigtramp_si2, i386nbsd_sigtramp_si31) (i386nbsd_sigtramp_si4): Use ULONGEST_MAX. * hppa-nbsd-tdep.c (hppanbsd_sigtramp_si4): Use ULONGEST_MAX. * common/common-types.h (ULONGEST_MAX): New define. (CORE_ADDR_MAX): Fix formatting. * bfin-linux-tdep.c (bfin_linux_sigframe): Use ULONGEST_MAX. * arm-obsd-tdep.c (armobsd_sigframe): Use ULONGEST_MAX. * arm-linux-tdep.c (arm_linux_sigreturn_tramp_frame) (arm_linux_rt_sigreturn_tramp_frame) (arm_eabi_linux_sigreturn_tramp_frame) (arm_eabi_linux_rt_sigreturn_tramp_frame) (thumb2_eabi_linux_sigreturn_tramp_frame) (thumb2_eabi_linux_rt_sigreturn_tramp_frame) (arm_linux_restart_syscall_tramp_frame) (arm_kernel_linux_restart_syscall_tramp_frame): Use ULONGEST_MAX. * arm-fbsd-tdep.c (arm_fbsd_sigframe): Use ULONGEST_MAX. * aarch64-linux-tdep.c (aarch64_linux_rt_sigframe): Use ULONGEST_MAX. * aarch64-fbsd-tdep.c (aarch64_fbsd_sigframe): Use ULONGEST_MAX.
2018-08-13Split size in regset section iteratorsAlan Hayward1-6/+8
In the existing code, when using the regset section iteration functions, the size parameter is used in different ways. With collect, size is used to create the buffer in which to write the regset. (see linux-tdep.c::linux_collect_regset_section_cb). With supply, size is used to confirm the existing regset is the correct size. If REGSET_VARIABLE_SIZE is set then the regset can be bigger than size. Effectively, size is the minimum possible size of the regset. (see corelow.c::get_core_register_section). There are currently no targets with both REGSET_VARIABLE_SIZE and a collect function. In SVE, a corefile can contain one of two formats after the header, both of which are different sizes. However, when writing a core file, we always want to write out the full bigger size. To allow support of collects for REGSET_VARIABLE_SIZE we need two sizes. This is done by adding supply_size and collect_size. gdb/ * aarch64-fbsd-tdep.c (aarch64_fbsd_iterate_over_regset_sections): Add supply_size and collect_size. * aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections): Likewise. * alpha-linux-tdep.c (alpha_linux_iterate_over_regset_sections): * alpha-nbsd-tdep.c (alphanbsd_iterate_over_regset_sections): Likewise. * amd64-fbsd-tdep.c (amd64fbsd_iterate_over_regset_sections): Likewise. * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections): Likewise. * arm-bsd-tdep.c (armbsd_iterate_over_regset_sections): Likewise. * arm-fbsd-tdep.c (arm_fbsd_iterate_over_regset_sections): Likewise. * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections): Likewise. * corelow.c (get_core_registers_cb): Likewise. (core_target::fetch_registers): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * frv-linux-tdep.c (frv_linux_iterate_over_regset_sections): Likewise. * gdbarch.h (void): Regenerate. * gdbarch.sh: Add supply_size and collect_size. * hppa-linux-tdep.c (hppa_linux_iterate_over_regset_sections): Likewise. * hppa-nbsd-tdep.c (hppanbsd_iterate_over_regset_sections): Likewise. * hppa-obsd-tdep.c (hppaobsd_iterate_over_regset_sections): Likewise. * i386-fbsd-tdep.c (i386fbsd_iterate_over_regset_sections): Likewise. * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): Likewise. * i386-tdep.c (i386_iterate_over_regset_sections): Likewise. * ia64-linux-tdep.c (ia64_linux_iterate_over_regset_sections): Likewise. * linux-tdep.c (linux_collect_regset_section_cb): Likewise. * m32r-linux-tdep.c (m32r_linux_iterate_over_regset_sections): Likewise. * m68k-bsd-tdep.c (m68kbsd_iterate_over_regset_sections): Likewise. * m68k-linux-tdep.c (m68k_linux_iterate_over_regset_sections): Likewise. * mips-fbsd-tdep.c (mips_fbsd_iterate_over_regset_sections): Likewise. * mips-linux-tdep.c (mips_linux_iterate_over_regset_sections): Likewise. * mips-nbsd-tdep.c (mipsnbsd_iterate_over_regset_sections): Likewise. * mips64-obsd-tdep.c (mips64obsd_iterate_over_regset_sections): Likewise. * mn10300-linux-tdep.c (am33_iterate_over_regset_sections): Likewise. * nios2-linux-tdep.c (nios2_iterate_over_regset_sections): Likewise. * ppc-fbsd-tdep.c (ppcfbsd_iterate_over_regset_sections): Likewise. * ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections): Likewise. * ppc-nbsd-tdep.c (ppcnbsd_iterate_over_regset_sections): Likewise. * ppc-obsd-tdep.c (ppcobsd_iterate_over_regset_sections): Likewise. * riscv-linux-tdep.c (riscv_linux_iterate_over_regset_sections): Likewise. * rs6000-aix-tdep.c (rs6000_aix_iterate_over_regset_sections): Likewise. * s390-linux-tdep.c (s390_iterate_over_regset_sections): Likewise. * score-tdep.c (score7_linux_iterate_over_regset_sections): Likewise. * sh-tdep.c (sh_iterate_over_regset_sections): Likewise. * sparc-tdep.c (sparc_iterate_over_regset_sections): Likewise. * tilegx-linux-tdep.c (tilegx_iterate_over_regset_sections): Likewise. * vax-tdep.c (vax_iterate_over_regset_sections): Likewise. * xtensa-tdep.c (xtensa_iterate_over_regset_sections): Likewise.
2018-06-21Use thread_info and inferior pointers more throughoutPedro Alves1-2/+2
This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-05-30Remove regcache_raw_collectSimon Marchi1-4/+4
Remove regcache_raw_collect, update callers to use regcache::raw_collect. gdb/ChangeLog: * regcache.h (regcache_raw_collect): Remove, update callers to use regcache::raw_collect. * regcache.c (regcache_raw_collect): Remove.
2018-05-30Remove regcache_raw_supplySimon Marchi1-8/+5
Remove regcache_raw_supply, update callers to use detached_regcache::raw_supply. gdb/ChangeLog: * regcache.h (regcache_raw_supply): Remove, update callers to use detached_regcache::raw_supply. * regcache.c (regcache_raw_supply): Remove.
2018-05-30Remove regcache_cooked_readSimon Marchi1-1/+1
Remove regcache_cooked_read, update callers to use readable_regcache::cooked_read instead. gdb/ChangeLog: * regcache.h (regcache_cooked_read): Remove, update callers to use readable_regcache::cooked_read instead. * regcache.c (regcache_cooked_read): Remove.
2018-05-25MIPS/Linux: Correct o32 core file FGR interpretationMaciej W. Rozycki1-96/+13
Our interpretation of the layout of floating-point general registers (FGRs) in o32 MIPS/Linux core files is different from how the kernel makes them, affecting the CP0 Status.FR=0 aka FP32 mode (we don't currently support the CP0 Status.FR=1 aka FP64 mode with the o32 ABI). In the FP32 mode pairs of consecutive even/odd-numbered 32-bit registers are placed together as 64-bit values in even-indexed 64-bit slots corresponding to the even index, leaving the odd-indexed 64-bit slots unused. These 64-bit values are stored according to the endianness in effect, which is how the MIPS II SDC1 instruction would store them. It has always been like that with the Linux kernel for MIPS II and higher ISA processors, which are the vast majority ever supported, as it is indeed SDC1 that the kernel uses to store FGRs in a floating-point context. With MIPS I processors, which lack the SDC1 instruction, a layout that we expect used to be used long ago, but it was corrected for consistency with newer processors back in 2002, with `linux-mips.org' (LMO) commit 42533948caac ("Major pile of FP emulator changes."), the fix corrected with LMO commit 849fa7a50dff ("R3k FPU ptrace() handling fixes."), and then broken and fixed over and over again, until last time fixed with commit 80cbfad79096 ("MIPS: Correct MIPS I FP context layout"). Consequently the values we see in FP32 core files or produce with the `gcore' command are different from those obtained from the same FP context of a live process, e.g. with a big-endian configuration these live values: (gdb) info registers float f0: 0x4b5c6d7e flt: 14445950 dbl: 1.7446153562345001e-274 f1: 0x0718293a flt: 1.14473244e-34 f2: 0xc3d4e5f6 flt: -425.79657 dbl: -1.046160437414959e-233 f3: 0x8f90a1b2 flt: -1.42617791e-29 f4: 0x4c5d6e7f flt: 58046972 dbl: 1.1908587841220294e-269 f5: 0x08192a3b flt: 4.60914044e-34 f6: 0xc4d5e6f7 flt: -1711.21765 dbl: -6.2784661835068965e-306 f7: 0x8091a2b3 flt: -1.33745124e-38 f8: 0x45566778 flt: 3430.4668 dbl: 1.6530355595710607e-303 f9: 0x01122334 flt: 2.68412219e-38 f10: 0xcddeeff0 flt: -467533312 dbl: -2.1174864564135575e-262 f11: 0x899aabbc flt: -3.72356497e-33 f12: 0x46576879 flt: 13786.1182 dbl: 1.143296486773654e-298 f13: 0x02132435 flt: 1.08102453e-37 f14: 0xcedfe0f1 flt: -1.87803046e+09 dbl: -1.4399511533369862e-257 f15: 0x8a9bacbd flt: -1.4990934e-32 f16: 0x4758697a flt: 55401.4766 dbl: 7.8856820439568725e-294 f17: 0x03142536 flt: 4.3536007e-37 f18: 0xcfd0e1f2 flt: -7.00893696e+09 dbl: -9.7791926757340559e-253 f19: 0x8b9cadbe flt: -6.03504325e-32 f20: 0x48596a7b flt: 222633.922 dbl: 5.4255001483306113e-289 f21: 0x04152637 flt: 1.75324132e-36 f22: 0xc0d1e2f3 flt: -6.55895376 dbl: -6.6332401002310683e-248 f23: 0x8c9daebf flt: -2.42948516e-31 f24: 0x495a6b7c flt: 894647.75 dbl: 3.7244369058749787e-284 f25: 0x05162738 flt: 7.06016945e-36 f26: 0xc1d2e3f4 flt: -26.3613052 dbl: -4.4941535759306202e-243 f27: 0x8d9eafb0 flt: -9.77979703e-31 f28: 0x4a5b6c7d flt: 3595039.25 dbl: 2.5514593711161396e-279 f29: 0x06172839 flt: 2.84294945e-35 f30: 0xc2d3e4f5 flt: -105.947182 dbl: -3.035646690850097e-238 f31: 0x8e9fa0b1 flt: -3.93512664e-30 fcsr: 0x0 fir: 0xf30000 (gdb) show up in a core file as these: (gdb) info registers float f0: 0x0718293a flt: 1.14473244e-34 dbl: nan f1: 0x7ff80000 flt: nan f2: 0x8f90a1b2 flt: -1.42617791e-29 dbl: nan f3: 0x7ff80000 flt: nan f4: 0x08192a3b flt: 4.60914044e-34 dbl: nan f5: 0x7ff80000 flt: nan f6: 0x8091a2b3 flt: -1.33745124e-38 dbl: nan f7: 0x7ff80000 flt: nan f8: 0x01122334 flt: 2.68412219e-38 dbl: nan f9: 0x7ff80000 flt: nan f10: 0x899aabbc flt: -3.72356497e-33 dbl: nan f11: 0x7ff80000 flt: nan f12: 0x02132435 flt: 1.08102453e-37 dbl: nan f13: 0x7ff80000 flt: nan f14: 0x8a9bacbd flt: -1.4990934e-32 dbl: nan f15: 0x7ff80000 flt: nan f16: 0x03142536 flt: 4.3536007e-37 dbl: nan f17: 0x7ff80000 flt: nan f18: 0x8b9cadbe flt: -6.03504325e-32 dbl: nan f19: 0x7ff80000 flt: nan f20: 0x04152637 flt: 1.75324132e-36 dbl: nan f21: 0x7ff80000 flt: nan f22: 0x8c9daebf flt: -2.42948516e-31 dbl: nan f23: 0x7ff80000 flt: nan f24: 0x05162738 flt: 7.06016945e-36 dbl: nan f25: 0x7ff80000 flt: nan f26: 0x8d9eafb0 flt: -9.77979703e-31 dbl: nan f27: 0x7ff80000 flt: nan f28: 0x06172839 flt: 2.84294945e-35 dbl: nan f29: 0x7ff80000 flt: nan f30: 0x8e9fa0b1 flt: -3.93512664e-30 dbl: nan f31: 0x7ff80000 flt: nan (gdb) Notice how values from odd-numbered registers are shown in corresponding even-numbered registers and how dummy 0x7ff80000 NaN values, which the kernel places in unused slots, are reported in odd-numbered registers. Correct our intepretation then, to match the kernel's. As it happens the o32 FGR core file representation matches that used by the `ptrace' PTRACE_GETFPREGS request, which means our 64-bit handlers can be readily used, as they already correctly handle the differences between o32 FP32 mode vs n32/n64 representations. Adjust comments accordingly throughout, in particular remove a reference to the r3000/tx39 MIPS I processor peculiarity, long irrelevant. Add a test case to verify correctness. Avoid GCC bugs and limitations in the test case where possible; the test case still fails to build with GCC 8 and the o32 FP64 mode (i.e. with `-mips32r2 -mfp64' options) giving: mips-fpregset-core.c: In function 'main': mips-fpregset-core.c:66:3: error: inconsistent operand constraints in an 'asm' asm ( ^~~ (GCC PR target/85909), but that is not a concern for us as yet, because as noted above we do not currently support the o32 FP64 mode anyway. gdb/ * mips-linux-tdep.h (mips_supply_fpregset, mips_fill_fpregset): Remove prototypes. * mips-linux-nat.c (supply_fpregset): Always call `mips64_supply_fpregset' rather than `mips_supply_fpregset'. (fill_fpregset): Always call `mips64_fill_fpregset' rather than `mips_fill_fpregset'. * mips-linux-tdep.c (mips_supply_fpregset) (mips_supply_fpregset_wrapper, mips_fill_fpregset) (mips_fill_fpregset_wrapper): Remove functions. (mips64_supply_fpregset, mips64_fill_fpregset): Update comments. (mips_linux_fpregset): Remove variable. (mips_linux_iterate_over_regset_sections): Use `mips64_linux_fpregset' in place of `mips_linux_fpregset'. (mips_linux_o32_sigframe_init): Remove comment. gdb/testsuite/ * gdb.arch/mips-fpregset-core.exp: New test. * gdb.arch/mips-fpregset-core.c: New test source.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-12-05Remove some unused variablesSimon Marchi1-1/+0
This patch removes some unused variables, found with -Wunused. I have not removed everything reported by -Wunused, because some expressions such as struct type *arg_type = check_typedef (value_type); in bfin-tdep.c could have an unexpected but important side-effect. I removed others that I considered more low-risk, such as: struct gdbarch *gdbarch = get_objfile_arch (objfile); I tested building with Python 2/Python 3/no Python, with/without expat, with/without libipt and with/without babeltrace. gdb/ChangeLog: * ada-lang.c (ada_collect_symbol_completion_matches): Remove unused variables. (ada_is_redundant_range_encoding): Likewise. * ada-varobj.c (ada_varobj_get_value_of_array_variable): Likewise. * alpha-tdep.c (alpha_software_single_step): Likewise. * arm-tdep.c (_initialize_arm_tdep): Likewise. * auto-load.c (info_auto_load_cmd): Likewise. * break-catch-syscall.c (insert_catch_syscall): Likewise. (remove_catch_syscall): Likewise. * breakpoint.c (condition_completer): Likewise. (clear_command): Likewise. (update_breakpoint_locations): Likewise. * btrace.c (btrace_disable): Likewise. (btrace_teardown): Likewise. (btrace_maint_update_pt_packets): Likewise. (maint_btrace_clear_cmd): Likewise. * cli/cli-decode.c (lookup_cmd_1): Likewise. (lookup_cmd_composition): Likewise. * cli/cli-dump.c (scan_filename): Likewise. (restore_command): Likewise. * compile/compile-loc2c.c (compute_stack_depth): Likewise. * compile/compile-object-load.c (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (compile_to_object): Likewise. * completer.c (filename_completer): Likewise. (complete_files_symbols): Likewise. (complete_expression): Likewise. * corelow.c (core_open): Likewise. * ctf.c (ctf_start): Likewise. (ctf_write_status): Likewise. (ctf_write_uploaded_tsv): Likewise. (ctf_write_definition_end): Likewise. (ctf_open_dir): Likewise. (ctf_xfer_partial): Likewise. (ctf_trace_find): Likewise. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. (indirect_pieced_value): Likewise. (dwarf2_evaluate_loc_desc_full): Likewise. * dwarf2read.c (dw2_expand_marked_cus): Likewise. (dw2_expand_symtabs_matching): Likewise. (dw2_map_symbol_filenames): Likewise. (read_and_check_comp_unit_head): Likewise. (read_cutu_die_from_dwo): Likewise. (lookup_dwo_unit): Likewise. (read_comp_units_from_section): Likewise. (dwarf2_compute_name): Likewise. (handle_DW_AT_stmt_list): Likewise. (create_cus_hash_table): Likewise. (create_dwp_v2_section): Likewise. (dwarf2_rnglists_process): Likewise. (dwarf2_ranges_process): Likewise. (dwarf2_record_block_ranges): Likewise. (is_vtable_name): Likewise. (read_formatted_entries): Likewise. (skip_form_bytes): Likewise. * elfread.c (elf_symtab_read): Likewise. * exec.c (exec_file_command): Likewise. * f-valprint.c (f_val_print): Likewise. (info_common_command_for_block): Likewise. * guile/guile.c (initialize_scheme_side): Likewise. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise. * guile/scm-cmd.c (cmdscm_completer): Likewise. (gdbscm_register_command_x): Likewise. * guile/scm-frame.c (gdbscm_frame_read_var): Likewise. * guile/scm-param.c (gdbscm_parameter_value): Likewise. * guile/scm-ports.c (file_port_magic): Likewise. * guile/scm-pretty-print.c (ppscm_search_pp_list): Likewise. (ppscm_pretty_print_one_value): Likewise. (ppscm_print_children): Likewise. * guile/scm-string.c (gdbscm_string_to_argv): Likewise. * guile/scm-symtab.c (gdbscm_sal_symtab): Likewise. * guile/scm-type.c (gdbscm_type_next_field_x): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * i386-tdep.c (i386_register_reggroup_p): Likewise. * infcmd.c (run_command_1): Likewise. (until_next_fsm_clean_up): Likewise. * linespec.c (linespec_complete): Likewise. (find_label_symbols): Likewise. * m2-valprint.c (m2_val_print): Likewise. * memattr.c (require_user_regions): Likewise. (lookup_mem_region): Likewise. (disable_mem_command): Likewise. (mem_delete): Likewise. * mep-tdep.c (mep_register_name): Likewise. (mep_analyze_prologue): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Likewise. * mi/mi-interp.c (mi_on_sync_execution_done): Likewise. * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise. * microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (lookup_minimal_symbol): Likewise. * mips-linux-tdep.c (mips64_fill_fpregset): Likewise. * mips-tdep.c (mips_stub_frame_sniffer): Likewise. (mips_o64_return_value): Likewise. (mips_single_step_through_delay): Likewise. (_initialize_mips_tdep): Likewise. * nios2-tdep.c (nios2_push_dummy_call): Likewise. (nios2_software_single_step): Likewise. * parse.c (find_minsym_type_and_address): Likewise. * psymtab.c (psym_relocate): Likewise. * python/py-breakpoint.c (bppy_get_commands): Likewise. (gdbpy_breakpoint_modified): Likewise. * python/py-infevents.c (create_inferior_call_event_object): Likewise. * python/py-record-btrace.c (btpy_list_item): Likewise. * python/py-type.c (typy_str): Likewise. * python/py-value.c (valpy_call): Likewise. * python/python.c (do_start_initialization): Likewise. * record-btrace.c (record_btrace_insn_history_range): Likewise. (record_btrace_call_history_range): Likewise. (record_btrace_record_method): Likewise. (record_btrace_xfer_partial): Likewise. (btrace_get_frame_function): Likewise. * record-full.c (record_full_open): Likewise. * record.c (get_context_size): Likewise. * registry.h (DEFINE_REGISTRY): Likewise. * remote-fileio.c (remote_fileio_request): Likewise. * remote.c (remote_update_thread_list): Likewise. (remote_check_symbols): Likewise. (remote_commit_resume): Likewise. (remote_interrupt): Likewise. (remote_insert_breakpoint): Likewise. (compare_sections_command): Likewise. * rust-exp.y (super_name): Likewise. (lex_string): Likewise. (convert_ast_to_type): Likewise. (convert_ast_to_expression): Likewise. * rust-lang.c (rust_print_struct_def): Likewise. (rust_print_type): Likewise. (rust_evaluate_subexp): Likewise. * rx-tdep.c (rx_register_type): Likewise. * ser-event.c (serial_event_clear): Likewise. * serial.c (serial_open): Likewise. * spu-tdep.c (spu_overlay_new_objfile): Likewise. * symfile.c (section_is_overlay): Likewise. (overlay_unmapped_address): Likewise. (overlay_mapped_address): Likewise. (simple_overlay_update_1): Likewise. (simple_overlay_update): Likewise. * symtab.c (symbol_find_demangled_name): Likewise. (search_symbols): Likewise. * target-descriptions.c (tdesc_predefined_type): Likewise. * target.c (target_commit_resume): Likewise. * thread.c (print_selected_thread_frame): Likewise. * top.c (new_ui_command): Likewise. (gdb_readline_no_editing): Likewise. * tracefile-tfile.c (tfile_open): Likewise. * tracepoint.c (create_tsv_from_upload): Likewise. * utils.c (quit): Likewise. (defaulted_query): Likewise. * valarith.c (value_concat): Likewise. * xml-syscall.c (xml_list_syscalls_by_group): Likewise. * xml-tdesc.c (target_fetch_description_xml): Likewise. * xtensa-tdep.c (xtensa_pseudo_register_read): Likewise. (xtensa_pseudo_register_write): Likewise. gdb/gdbserver/ChangeLog: * regcache.c (registers_to_string): Remove unused variable.
2017-10-25s/get_regcache_arch (regcache)/regcache->arch ()/gYao Qi1-10/+10
This patches removes get_regcache_arch, and use regache->arch () instead. The motivation of this change is that I am going to move some basic stuff into a base class of regcache. I don't need to update "client" code regcache->arch (). On the other hand, this patch shortens the code a little bit. gdb: 2017-10-25 Yao Qi <yao.qi@linaro.org> * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Use regcache->arch () instead get_regcache_arch. * aarch64-fbsd-nat.c (aarch64_fbsd_fetch_inferior_registers): Likewise. (aarch64_fbsd_store_inferior_registers): Likewise. * aarch64-linux-nat.c (fetch_gregs_from_thread): Likewise. (store_gregs_to_thread): Likewise. (fetch_fpregs_from_thread): Likewise. (store_fpregs_to_thread): Likewise. * aarch64-tdep.c (aarch64_extract_return_value): Likewise. (aarch64_store_return_value): Likewise. (aarch64_software_single_step): Likewise. * aix-thread.c (aix_thread_wait): Likewise. (supply_reg32): Likewise. (supply_sprs64): Likewise. (supply_sprs32): Likewise. (fill_gprs64): Likewise. (fill_gprs32): Likewise. (fill_sprs64): Likewise. (fill_sprs32): Likewise. (store_regs_user_thread): Likewise. (store_regs_kernel_thread): Likewise. * alpha-bsd-nat.c (alphabsd_fetch_inferior_registers): Likewise. (alphabsd_store_inferior_registers): Likewise. * alpha-tdep.c (alpha_extract_return_value): Likewise. (alpha_store_return_value): Likewise. (alpha_deal_with_atomic_sequence): Likewise. (alpha_next_pc): Likewise. (alpha_software_single_step): Likewise. * amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise. (amd64bsd_store_inferior_registers): Likewise. * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Likewise. (amd64_linux_store_inferior_registers): Likewise. * amd64-nat.c (amd64_supply_native_gregset): Likewise. (amd64_collect_native_gregset): Likewise. * amd64-obsd-tdep.c (amd64obsd_supply_uthread): Likewise. (amd64obsd_collect_uthread): Likewise. * amd64-tdep.c (amd64_supply_fpregset): Likewise. (amd64_collect_fpregset): Likewise. (amd64_supply_fxsave): Likewise. (amd64_supply_xsave): Likewise. (amd64_collect_fxsave): Likewise. (amd64_collect_xsave): Likewise. * arc-tdep.c (arc_write_pc): Likewise. * arch-utils.c (default_skip_permanent_breakpoint): Likewise. * arm-fbsd-nat.c (arm_fbsd_fetch_inferior_registers): Likewise. (arm_fbsd_store_inferior_registers): Likewise. * arm-linux-nat.c (fetch_vfp_regs): Likewise. (store_vfp_regs): Likewise. (arm_linux_fetch_inferior_registers): Likewise. (arm_linux_store_inferior_registers): Likewise. * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise. (arm_linux_sigreturn_next_pc): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-nbsd-nat.c (arm_supply_gregset): Likewise. (fetch_register): Likewise. (store_register): Likewise. * arm-tdep.c (arm_is_thumb): Likewise. (displaced_in_arm_mode): Likewise. (bx_write_pc): Likewise. (arm_get_next_pcs_addr_bits_remove): Likewise. (arm_software_single_step): Likewise. (arm_extract_return_value): Likewise. (arm_store_return_value): Likewise. (arm_write_pc): Likewise. * bfin-tdep.c (bfin_extract_return_value): Likewise. * bsd-uthread.c (bsd_uthread_fetch_registers): Likewise. (bsd_uthread_store_registers): Likewise. * core-regset.c (fetch_core_registers): Likewise. * corelow.c (get_core_registers): Likewise. * cris-tdep.c (cris_store_return_value): Likewise. (cris_extract_return_value): Likewise. (find_step_target): Likewise. (find_step_target): Likewise. (cris_software_single_step): Likewise. * ctf.c (ctf_fetch_registers): Likewise. * darwin-nat.c (cancel_breakpoint): Likewise. * fbsd-tdep.c (fbsd_collect_thread_registers): Likewise. * frv-tdep.c (frv_extract_return_value): Likewise. * ft32-tdep.c (ft32_store_return_value): Likewise. (ft32_extract_return_value): Likewise. * go32-nat.c (fetch_register): Likewise. (go32_fetch_registers): Likewise. (go32_store_registers): Likewise. (store_register): Likewise. * h8300-tdep.c (h8300_extract_return_value): Likewise. (h8300_store_return_value): Likewise. * hppa-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (hppa_linux_fetch_inferior_registers): Likewise. (hppa_linux_store_inferior_registers): Likewise. * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Likewise. (i386_darwin_store_inferior_registers): Likewise. * i386-gnu-nat.c (gnu_fetch_registers): Likewise. (gnu_store_registers): Likewise. * i386-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (supply_gregset): Likewise. (fill_gregset): Likewise. (i386_linux_fetch_inferior_registers): Likewise. (i386_linux_store_inferior_registers): Likewise. (i386_linux_resume): Likewise. * i386-linux-tdep.c (i386_linux_get_syscall_number_from_regcache): Likewise. * i386-nto-tdep.c (i386nto_supply_gregset): Likewise. * i386-obsd-nat.c (i386obsd_supply_pcb): Likewise. * i386-obsd-tdep.c (i386obsd_supply_uthread): Likewise. (i386obsd_collect_uthread): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_supply_fpregset): Likewise. (i386_collect_fpregset): Likewise. (i386_mpx_bd_base): Likewise. * i386-v4-nat.c (supply_fpregset): Likewise. (fill_fpregset): Likewise. * i387-tdep.c (i387_supply_fsave): Likewise. (i387_collect_fsave): Likewise. (i387_supply_fxsave): Likewise. (i387_collect_fxsave): Likewise. (i387_supply_xsave): Likewise. (i387_collect_xsave): Likewise. * ia64-linux-nat.c (ia64_linux_fetch_registers): Likewise. (ia64_linux_store_registers): Likewise. * ia64-tdep.c (ia64_access_rse_reg): Likewise. (ia64_extract_return_value): Likewise. (ia64_store_return_value): Likewise. (find_func_descr): Likewise. * inf-child.c (inf_child_fetch_inferior_registers): Likewise. * inf-ptrace.c (inf_ptrace_fetch_registers): Likewise. (inf_ptrace_store_registers): Likewise. * infrun.c (use_displaced_stepping): Likewise. (displaced_step_prepare_throw): Likewise. (resume): Likewise. (proceed): Likewise. (do_target_wait): Likewise. (adjust_pc_after_break): Likewise. (handle_inferior_event_1): Likewise. (handle_signal_stop): Likewise. (save_infcall_suspend_state): Likewise. (restore_infcall_suspend_state): Likewise. * iq2000-tdep.c (iq2000_extract_return_value): Likewise. * jit.c (jit_frame_prev_register): Likewise. * linux-nat.c (save_stop_reason): Likewise. (linux_nat_wait_1): Likewise. (resume_stopped_resumed_lwps): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (record_linux_system_call): Likewise. * linux-tdep.c (linux_collect_thread_registers): Likewise. * lm32-tdep.c (lm32_extract_return_value): Likewise. (lm32_store_return_value): Likewise. * m32c-tdep.c (m32c_read_flg): Likewise. (m32c_pseudo_register_read): Likewise. (m32c_pseudo_register_write): Likewise. * m32r-linux-tdep.c (m32r_linux_supply_gregset): Likewise. (m32r_linux_collect_gregset): Likewise. * m32r-tdep.c (m32r_store_return_value): Likewise. (m32r_extract_return_value): Likewise. * m68k-bsd-nat.c (m68kbsd_supply_fpregset): Likewise. (m68kbsd_collect_fpregset): Likewise. * m68k-bsd-tdep.c (m68kbsd_supply_fpregset): Likewise. * m68k-linux-nat.c (fetch_register): Likewise. (old_fetch_inferior_registers): Likewise. (old_store_inferior_registers): Likewise. (store_regs): Likewise. * m68k-tdep.c (m68k_svr4_extract_return_value): Likewise. (m68k_svr4_store_return_value): Likewise. * m88k-tdep.c (m88k_store_arguments): Likewise. * mi/mi-main.c (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_write_register_values): Likewise. * mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers): Likewise. (mips_fbsd_store_inferior_registers): Likewise. * mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Likewise. (mips_fbsd_supply_gregs): Likewise. (mips_fbsd_collect_fpregs): Likewise. (mips_fbsd_collect_gregs): Likewise. (mips_fbsd_supply_fpregset): Likewise. (mips_fbsd_collect_fpregset): Likewise. (mips_fbsd_supply_gregset): Likewise. (mips_fbsd_collect_gregset): Likewise. * mips-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (supply_fpregset): Likewise. (fill_fpregset): Likewise. * mips-linux-tdep.c (mips_supply_gregset): Likewise. (mips_fill_gregset): Likewise. (mips_supply_fpregset): Likewise. (mips_fill_fpregset): Likewise. (mips64_supply_gregset): Likewise. (micromips_linux_sigframe_validate): Likewise. * mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_store_inferior_registers): Likewise. * mips-nbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. (mipsnbsd_iterate_over_regset_sections): Likewise. (mipsnbsd_supply_reg): Likewise. (mipsnbsd_supply_fpreg): Likewise. * mips-tdep.c (mips_in_frame_stub): Likewise. (mips_dummy_id): Likewise. (is_octeon_bbit_op): Likewise. (micromips_bc1_pc): Likewise. (extended_mips16_next_pc): Likewise. (mips16_next_pc): Likewise. (deal_with_atomic_sequence): Likewise. * moxie-tdep.c (moxie_process_readu): Likewise. * nios2-tdep.c (nios2_get_next_pc): Likewise. * nto-procfs.c (procfs_store_registers): Likewise. * ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers): Likewise. (ppcfbsd_store_inferior_registers): Likewise. * ppc-linux-nat.c (fetch_vsx_register): Likewise. (fetch_altivec_register): Likewise. (get_spe_registers): Likewise. (fetch_spe_register): Likewise. (fetch_altivec_registers): Likewise. (fetch_all_gp_regs): Likewise. (fetch_all_fp_regs): Likewise. (store_vsx_register): Likewise. (store_altivec_register): Likewise. (set_spe_registers): Likewise. (store_spe_register): Likewise. (store_altivec_registers): Likewise. (store_all_gp_regs): Likewise. (store_all_fp_regs): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppc_canonicalize_syscall): Likewise. (ppc_linux_record_signal): Likewise. (ppu2spu_prev_register): Likewise. * ppc-nbsd-nat.c (ppcnbsd_supply_pcb): Likewise. * ppc-obsd-nat.c (ppcobsd_fetch_registers): Likewise. (ppcobsd_store_registers): Likewise. * ppc-ravenscar-thread.c (ppc_ravenscar_generic_fetch_registers): Likewise. (ppc_ravenscar_generic_store_registers): Likewise. * procfs.c (procfs_fetch_registers): Likewise. (procfs_store_registers): Likewise. * ravenscar-thread.c (ravenscar_fetch_registers): Likewise. (ravenscar_store_registers): Likewise. (ravenscar_prepare_to_store): Likewise. * record-btrace.c (record_btrace_fetch_registers): Likewise. * record-full.c (record_full_wait_1): Likewise. (record_full_registers_change): Likewise. (record_full_store_registers): Likewise. (record_full_core_fetch_registers): Likewise. (record_full_save): Likewise. (record_full_goto_insn): Likewise. * regcache.c (regcache_register_size): Likewise. (get_regcache_arch): Remove. (regcache_read_pc): Likewise. * regcache.h (get_regcache_arch): Remove. * remote-sim.c (gdbsim_fetch_register): Likewise. (gdbsim_store_register): Likewise. * remote.c (fetch_register_using_p): Likewise. (send_g_packet): Likewise. (remote_prepare_to_store): Likewise. (store_registers_using_G): Likewise. * reverse.c (save_bookmark_command): Likewise. (goto_bookmark_command): Likewise. * rs6000-aix-tdep.c (branch_dest): Likewise. * rs6000-nat.c (rs6000_ptrace64): Likewise. (fetch_register): Likewise. * rs6000-tdep.c (ppc_supply_reg): Likewise. (ppc_collect_reg): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (ppc_displaced_step_hw_singlestep): Likewise. (rs6000_pseudo_register_read): Likewise. (rs6000_pseudo_register_write): Likewise. * s390-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (s390_linux_fetch_inferior_registers): Likewise. * s390-linux-tdep.c (s390_write_pc): Likewise. (s390_software_single_step): Likewise. (s390_all_but_pc_registers_record): Likewise. (s390_linux_syscall_record): Likewise. * sentinel-frame.c (sentinel_frame_prev_arch): Likewise. * sh-nbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise. (shnbsd_store_inferior_registers): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. (sh_extract_return_value_fpu): Likewise. (sh_store_return_value_nofpu): Likewise. (sh_corefile_supply_regset): Likewise. (sh_corefile_collect_regset): Likewise. * sh64-tdep.c (sh64_extract_return_value): Likewise. (sh64_store_return_value): Likewise. * sparc-linux-tdep.c (sparc32_linux_collect_core_fpregset): Likewise. * sparc-nat.c (sparc_fetch_inferior_registers): Likewise. (sparc_store_inferior_registers): Likewise. * sparc-ravenscar-thread.c (register_in_thread_descriptor_p): Likewise. (sparc_ravenscar_prepare_to_store): Likewise. * sparc-tdep.c (sparc32_store_arguments): Likewise. (sparc_analyze_control_transfer): Likewise. (sparc_step_trap): Likewise. (sparc_software_single_step): Likewise. (sparc32_gdbarch_init): Likewise. (sparc_supply_rwindow): Likewise. (sparc_collect_rwindow): Likewise. * sparc64-linux-tdep.c (sparc64_linux_collect_core_fpregset): Likewise. * sparc64-nbsd-nat.c (sparc64nbsd_supply_gregset): Likewise. (sparc64nbsd_collect_gregset): Likewise. (sparc64nbsd_supply_fpregset): Likewise. (sparc64nbsd_collect_fpregset): Likewise. * sparc64-tdep.c (sparc64_store_arguments): Likewise. (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise. * spu-tdep.c (spu_unwind_sp): Likewise. (spu2ppu_prev_register): Likewise. (spu_memory_remove_breakpoint): Likewise. * stack.c (return_command): Likewise. * tic6x-tdep.c (tic6x_extract_signed_field): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (trace_save_ctf): Likewise. * windows-nat.c (do_windows_fetch_inferior_registers): Likewise. (do_windows_store_inferior_registers): Likewise. (windows_resume): Likewise. * xtensa-linux-nat.c (fill_gregset): Likewise. (supply_gregset_reg): Likewise. * xtensa-tdep.c (xtensa_register_write_masked): Likewise. (xtensa_register_read_masked): Likewise. (xtensa_supply_gregset): Likewise. (xtensa_extract_return_value): Likewise. (xtensa_store_return_value): Likewise.
2017-09-09Remove unnecessary function prototypes.John Baldwin1-3/+0
These prototypes were required when compiling GDB as C but are not required for C++. gdb/ChangeLog: * aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat prototype. * aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep prototype. * aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep prototype. * aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype. * ada-exp.y: Remove _initialize_ada_exp prototype. * ada-lang.c: Remove _initialize_ada_language prototype. * ada-tasks.c: Remove _initialize_tasks prototype. * addrmap.c: Remove _initialize_addrmap prototype. * agent.c: Remove _initialize_agent prototype. * aix-thread.c: Remove _initialize_aix_thread prototype. * alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype. * alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype. * alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep prototype. * alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype. * alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype. * alpha-tdep.c: Remove _initialize_alpha_tdep prototype. * amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep prototype. * amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep prototype. * amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype. * amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype. * amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype. * amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep prototype. * amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype. * amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype. * amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype. * amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype. * amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * amd64-tdep.c: Remove _initialize_amd64_tdep prototype. * amd64-windows-nat.c: Remove _initialize_amd64_windows_nat prototype. * amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep prototype. * annotate.c: Remove _initialize_annotate prototype. * arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype. * arc-tdep.c: Remove _initialize_arc_tdep prototype. * arch-utils.c: Remove _initialize_gdbarch_utils prototype. * arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype. * arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype. * arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype. * arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype. * arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep prototype. * arm-tdep.c: Remove _initialize_arm_tdep prototype. * arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype. * auto-load.c: Remove _initialize_auto_load prototype. * auxv.c: Remove _initialize_auxv prototype. * avr-tdep.c: Remove _initialize_avr_tdep prototype. * ax-gdb.c: Remove _initialize_ax_gdb prototype. * bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype. * bfin-tdep.c: Remove _initialize_bfin_tdep prototype. * break-catch-sig.c: Remove _initialize_break_catch_sig prototype. * break-catch-syscall.c: Remove _initialize_break_catch_syscall prototype. * break-catch-throw.c: Remove _initialize_break_catch_throw prototype. * breakpoint.c: Remove _initialize_breakpoint prototype. * bsd-uthread.c: Remove _initialize_bsd_uthread prototype. * btrace.c: Remove _initialize_btrace prototype. * charset.c: Remove _initialize_charset prototype. * cli/cli-cmds.c: Remove _initialize_cli_cmds prototype. * cli/cli-dump.c: Remove _initialize_cli_dump prototype. * cli/cli-interp.c: Remove _initialize_cli_interp prototype. * cli/cli-logging.c: Remove _initialize_cli_logging prototype. * cli/cli-script.c: Remove _initialize_cli_script prototype. * coff-pe-read.c: Remove _initialize_coff_pe_read prototype. * coffread.c: Remove _initialize_coffread prototype. * compile/compile.c: Remove _initialize_compile prototype. * complaints.c: Remove _initialize_complaints prototype. * completer.c: Remove _initialize_completer prototype. * copying.awk: Remove _initialize_copying prototype. * copying.c: Regenerate. * core-regset.c: Remove _initialize_core_regset prototype. * corefile.c: Remove _initialize_core prototype. * corelow.c: Remove _initialize_corelow prototype. * cp-abi.c: Remove _initialize_cp_abi prototype. * cp-namespace.c: Remove _initialize_cp_namespace prototype. * cp-support.c: Remove _initialize_cp_support prototype. * cp-valprint.c: Remove _initialize_cp_valprint prototype. * cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype. * cris-tdep.c: Remove _initialize_cris_tdep prototype. * ctf.c: Remove _initialize_ctf prototype. * d-lang.c: Remove _initialize_d_language prototype. * darwin-nat-info.c: Remove _initialize_darwin_info_commands prototype. * darwin-nat.c: Remove _initialize_darwin_inferior prototype. * dbxread.c: Remove _initialize_dbxread prototype. * dcache.c: Remove _initialize_dcache prototype. * demangle.c: Remove _initialize_demangler prototype. * disasm-selftests.c: Remove _initialize_disasm_selftests prototype. * disasm.c: Remove _initialize_disasm prototype. * dtrace-probe.c: Remove _initialize_dtrace_probe prototype. * dummy-frame.c: Remove _initialize_dummy_frame prototype. * dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame prototype. * dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype. * dwarf2expr.c: Remove _initialize_dwarf2expr prototype. * dwarf2loc.c: Remove _initialize_dwarf2loc prototype. * dwarf2read.c: Remove _initialize_dwarf2_read prototype. * elfread.c: Remove _initialize_elfread prototype. * exec.c: Remove _initialize_exec prototype. * extension.c: Remove _initialize_extension prototype. * f-lang.c: Remove _initialize_f_language prototype. * f-valprint.c: Remove _initialize_f_valprint prototype. * fbsd-nat.c: Remove _initialize_fbsd_nat prototype. * fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype. * filesystem.c: Remove _initialize_filesystem prototype. * findcmd.c: Remove _initialize_mem_search prototype. * fork-child.c: Remove _initialize_fork_child prototype. * frame-base.c: Remove _initialize_frame_base prototype. * frame-unwind.c: Remove _initialize_frame_unwind prototype. * frame.c: Remove _initialize_frame prototype. * frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype. * frv-tdep.c: Remove _initialize_frv_tdep prototype. * ft32-tdep.c: Remove _initialize_ft32_tdep prototype. * gcore.c: Remove _initialize_gcore prototype. * gdb_bfd.c: Remove _initialize_gdb_bfd prototype. * gdbarch.c: Regenerate. * gdbarch.sh: Remove _initialize_gdbarch prototype. * gdbtypes.c: Remove _initialize_gdbtypes prototype. * gnu-nat.c: Remove _initialize_gnu_nat prototype. * gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype. * gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype. * go-lang.c: Remove _initialize_go_language prototype. * go32-nat.c: Remove _initialize_go32_nat prototype. * guile/guile.c: Remove _initialize_guile prototype. * h8300-tdep.c: Remove _initialize_h8300_tdep prototype. * hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype. * hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype. * hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype. * hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype. * hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype. * hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype. * hppa-tdep.c: Remove _initialize_hppa_tdep prototype. * i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype. * i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep prototype. * i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep prototype. * i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype. * i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype. * i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype. * i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype. * i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype. * i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype. * i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype. * i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype. * i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype. * i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype. * i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype. * i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype. * i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype. * i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * i386-tdep.c: Remove _initialize_i386_tdep prototype. * i386-windows-nat.c: Remove _initialize_i386_windows_nat prototype. * ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame prototype. * ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype. * ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype. * ia64-tdep.c: Remove _initialize_ia64_tdep prototype. * ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype. * infcall.c: Remove _initialize_infcall prototype. * infcmd.c: Remove _initialize_infcmd prototype. * inferior.c: Remove _initialize_inferiors prototype. * inflow.c: Remove _initialize_inflow prototype. * infrun.c: Remove _initialize_infrun prototype. * interps.c: Remove _initialize_interpreter prototype. * iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype. * jit.c: Remove _initialize_jit prototype. * language.c: Remove _initialize_language prototype. * linux-fork.c: Remove _initialize_linux_fork prototype. * linux-nat.c: Remove _initialize_linux_nat prototype. * linux-tdep.c: Remove _initialize_linux_tdep prototype. * linux-thread-db.c: Remove _initialize_thread_db prototype. * lm32-tdep.c: Remove _initialize_lm32_tdep prototype. * m2-lang.c: Remove _initialize_m2_language prototype. * m32c-tdep.c: Remove _initialize_m32c_tdep prototype. * m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype. * m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype. * m32r-tdep.c: Remove _initialize_m32r_tdep prototype. * m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype. * m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-tdep.c: Remove _initialize_m68k_tdep prototype. * m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * machoread.c: Remove _initialize_machoread prototype. * macrocmd.c: Remove _initialize_macrocmd prototype. * macroscope.c: Remove _initialize_macroscope prototype. * maint.c: Remove _initialize_maint_cmds prototype. * mdebugread.c: Remove _initialize_mdebugread prototype. * memattr.c: Remove _initialize_mem prototype. * mep-tdep.c: Remove _initialize_mep_tdep prototype. * mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype. * mi/mi-cmds.c: Remove _initialize_mi_cmds prototype. * mi/mi-interp.c: Remove _initialize_mi_interp prototype. * mi/mi-main.c: Remove _initialize_mi_main prototype. * microblaze-linux-tdep.c: Remove _initialize_microblaze_linux_tdep prototype. * microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype. * mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype. * mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype. * mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype. * mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype. * mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype. * mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype. * mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype. * mips-tdep.c: Remove _initialize_mips_tdep prototype. * mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype. * mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep prototype. * mipsread.c: Remove _initialize_mipsread prototype. * mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep prototype. * mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype. * moxie-tdep.c: Remove _initialize_moxie_tdep prototype. * msp430-tdep.c: Remove _initialize_msp430_tdep prototype. * mt-tdep.c: Remove _initialize_mt_tdep prototype. * nds32-tdep.c: Remove _initialize_nds32_tdep prototype. * nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep prototype. * nios2-tdep.c: Remove _initialize_nios2_tdep prototype. * nto-procfs.c: Remove _initialize_procfs prototype. * nto-tdep.c: Remove _initialize_nto_tdep prototype. * objc-lang.c: Remove _initialize_objc_language prototype. * objfiles.c: Remove _initialize_objfiles prototype. * observer.c: Remove observer_test_first_notification_function, observer_test_second_notification_function, observer_test_third_notification_function, and _initialize_observer prototypes. * opencl-lang.c: Remove _initialize_opencl_language prototypes. * osabi.c: Remove _initialize_gdb_osabi prototype. * osdata.c: Remove _initialize_osdata prototype. * p-valprint.c: Remove _initialize_pascal_valprint prototype. * parse.c: Remove _initialize_parse prototype. * ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype. * ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype. * ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype. * ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype. * ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype. * ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype. * ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype. * ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype. * printcmd.c: Remove _initialize_printcmd prototype. * probe.c: Remove _initialize_probe prototype. * proc-api.c: Remove _initialize_proc_api prototype. * proc-events.c: Remove _initialize_proc_events prototype. * proc-service.c: Remove _initialize_proc_service prototype. * procfs.c: Remove _initialize_procfs prototype. * psymtab.c: Remove _initialize_psymtab prototype. * python/python.c: Remove _initialize_python prototype. * ravenscar-thread.c: Remove _initialize_ravenscar prototype. * record-btrace.c: Remove _initialize_record_btrace prototype. * record-full.c: Remove _initialize_record_full prototype. * record.c: Remove _initialize_record prototype. * regcache.c: Remove _initialize_regcache prototype. * reggroups.c: Remove _initialize_reggroup prototype. * remote-notif.c: Remove _initialize_notif prototype. * remote-sim.c: Remove _initialize_remote_sim prototype. * remote.c: Remove _initialize_remote prototype. * reverse.c: Remove _initialize_reverse prototype. * rl78-tdep.c: Remove _initialize_rl78_tdep prototype. * rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype. * rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep prototype. * rs6000-nat.c: Remove _initialize_rs6000_nat prototype. * rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype. * rust-exp.y: Remove _initialize_rust_exp prototype. * rx-tdep.c: Remove _initialize_rx_tdep prototype. * s390-linux-nat.c: Remove _initialize_s390_nat prototype. * s390-linux-tdep.c: Remove _initialize_s390_tdep prototype. * score-tdep.c: Remove _initialize_score_tdep prototype. * selftest-arch.c: Remove _initialize_selftests_foreach_arch prototype. * ser-go32.c: Remove _initialize_ser_dos prototype. * ser-mingw.c: Remove _initialize_ser_windows prototype. * ser-pipe.c: Remove _initialize_ser_pipe prototype. * ser-tcp.c: Remove _initialize_ser_tcp prototype. * ser-unix.c: Remove _initialize_ser_hardwire prototype. * serial.c: Remove _initialize_serial prototype. * sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype. * sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype. * sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype. * sh-tdep.c: Remove _initialize_sh_tdep prototype. * skip.c: Remove _initialize_step_skip prototype. * sol-thread.c: Remove _initialize_sol_thread prototype. * solib-aix.c: Remove _initialize_solib_aix prototype. * solib-darwin.c: Remove _initialize_darwin_solib prototype. * solib-dsbt.c: Remove _initialize_dsbt_solib prototype. * solib-frv.c: Remove _initialize_frv_solib prototype. * solib-spu.c: Remove _initialize_spu_solib prototype. * solib-svr4.c: Remove _initialize_svr4_solib prototype. * solib-target.c: Remove _initialize_solib_target prototype. * solib.c: Remove _initialize_solib prototype. * source.c: Remove _initialize_source prototype. * sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype. * sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep prototype. * sparc-nat.c: Remove _initialize_sparc_nat prototype. * sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype. * sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype. * sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep prototype. * sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype. * sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype. * sparc-tdep.c: Remove _initialize_sparc_tdep prototype. * sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat prototype. * sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep prototype. * sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat prototype. * sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep prototype. * sparc64-nat.c: Remove _initialize_sparc64_nat prototype. * sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat prototype. * sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep prototype. * sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat prototype. * sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep prototype. * sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep prototype. * spu-linux-nat.c: Remove _initialize_spu_nat prototype. * spu-multiarch.c: Remove _initialize_spu_multiarch prototype. * spu-tdep.c: Remove _initialize_spu_tdep prototype. * stabsread.c: Remove _initialize_stabsread prototype. * stack.c: Remove _initialize_stack prototype. * stap-probe.c: Remove _initialize_stap_probe prototype. * std-regs.c: Remove _initialize_frame_reg prototype. * symfile-debug.c: Remove _initialize_symfile_debug prototype. * symfile-mem.c: Remove _initialize_symfile_mem prototype. * symfile.c: Remove _initialize_symfile prototype. * symmisc.c: Remove _initialize_symmisc prototype. * symtab.c: Remove _initialize_symtab prototype. * target-dcache.c: Remove _initialize_target_dcache prototype. * target-descriptions.c: Remove _initialize_target_descriptions prototype. * thread.c: Remove _initialize_thread prototype. * tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep prototype. * tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype. * tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype. * tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep prototype. * tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype. * tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype. * tracefile.c: Remove _initialize_tracefile prototype. * tracepoint.c: Remove _initialize_tracepoint prototype. * tui/tui-hooks.c: Remove _initialize_tui_hooks prototype. * tui/tui-interp.c: Remove _initialize_tui_interp prototype. * tui/tui-layout.c: Remove _initialize_tui_layout prototype. * tui/tui-regs.c: Remove _initialize_tui_regs prototype. * tui/tui-stack.c: Remove _initialize_tui_stack prototype. * tui/tui-win.c: Remove _initialize_tui_win prototype. * tui/tui.c: Remove _initialize_tui prototype. * typeprint.c: Remove _initialize_typeprint prototype. * user-regs.c: Remove _initialize_user_regs prototype. * utils.c: Remove _initialize_utils prototype. * v850-tdep.c: Remove _initialize_v850_tdep prototype. * valarith.c: Remove _initialize_valarith prototype. * valops.c: Remove _initialize_valops prototype. * valprint.c: Remove _initialize_valprint prototype. * value.c: Remove _initialize_values prototype. * varobj.c: Remove _initialize_varobj prototype. * vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype. * vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype. * vax-tdep.c: Remove _initialize_vax_tdep prototype. * windows-nat.c: Remove _initialize_windows_nat, _initialize_check_for_gdb_ini, and _initialize_loadable prototypes. * windows-tdep.c: Remove _initialize_windows_tdep prototype. * xcoffread.c: Remove _initialize_xcoffread prototype. * xml-support.c: Remove _initialize_xml_support prototype. * xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype. * xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat prototype. * xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep prototype. * xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.
2017-08-07gdbarch: Use an anonymous union for target data in `gdbarch_info'Maciej W. Rozycki1-2/+1
As an update to commit ede5f15146ae ("gdbarch.h: Change gdbarch_info::tdep_info's type to void *") replace the definition of the `tdep_info' member in `struct gdbarch_info' with an anonymous union, comprising the original member, with its type reverted to `struct gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data *' type and an `id' member of an `int *' type. Remove now unnecessary casts throughout use places then, making code easier to read an less prone to errors, which may happen with casting. gdb/ * gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with a union of `tdep_info', `tdesc_data' and `id'. * aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data' rather than `info.tdep_info'. * amd64-linux-tdep.c (amd64_linux_init_abi): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * i386-tdep.c (i386_gdbarch_init): Likewise. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than `info.tdep_info'. (ppc_linux_init_abi): Use `info.tdesc_data' rather than `info.tdep_info'. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * spu-multiarch.c (spu_gdbarch): Use `info.id' rather than `info.tdep_info'. * spu-tdep.c (spu_gdbarch_init): Likewise. * gdbarch.h: Regenerate.
2017-06-13Move initialize_tdesc_mips* calls from mips-linux-nat.c to mips-linux-tdep.cYao Qi1-0/+11
All target descriptions except mips initialization are called in -tdep.c, instead of -nat.c, so this patch moves mips target descriptions initialization to -tdep.c. Secondly, I want to change the target descriptions from pre-generated to dynamical creation, so I want to test that these pre-generated target descriptions equal to these dynamically created ones. Move target descriptions initialization to -tdep.c files so we can test them in any hosts (if they are still -nat.c, we can only test them on mips-linux host.). gdb: 2017-06-13 Yao Qi <yao.qi@linaro.org> * mips-linux-nat.c: Move include features/mips*-linux.c to mips-linux-tdep.c. (_initialize_mips_linux_nat): Move initialize_tdesc_mips* calls to mips-linux-tdep.c. * mips-linux-tdep.c: Include features/mips*-linux.c (_initialize_mips_linux_tdep): Call initialize_tdesc_mips* functions. * mips-linux-tdep.h (tdesc_mips_linux): Declare. (tdesc_mips_dsp_linux, tdesc_mips64_linux): Declare. (tdesc_mips64_dsp_linux): Declare.
2017-05-26Add regcache raw_supply_integer and raw_collect_integer.Alan Hayward1-29/+4
Use these to replace instances of MAX_REGISTER_SIZE. * defs.h (copy_integer_to_size): New declaration. * findvar.c (copy_integer_to_size): New function. (do_cint_test): New selftest function. (copy_integer_to_size_test): Likewise. (_initialize_findvar): Likewise. * mips-fbsd-tdep.c (mips_fbsd_supply_reg): Use raw_supply_integer. (mips_fbsd_collect_reg): Use raw_collect_integer. * mips-linux-tdep.c (supply_32bit_reg): Use raw_supply_integer. (mips64_fill_gregset): Use raw_collect_integer (mips64_fill_fpregset): Use raw_supply_integer. * regcache.c (regcache::raw_supply_integer): New function. (regcache::raw_collect_integer): Likewise. * regcache.h: (regcache::raw_supply_integer): New declaration. (regcache::raw_collect_integer): Likewise.
2017-05-08Remove some uses of MAX_REGISTER_SIZE from mips-linux-tdep.cAlan Hayward1-14/+4
gdb/ * mips-linux-tdep.c (mips_supply_gregset): Use raw_supply_zeroed. (mips_supply_fpregset): Likewise. (mips64_supply_gregset): Likewise.
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-10-28Move encoded as 'or' in binutils.Simon Dardis1-4/+6
A patch (http://sourceware.org/ml/binutils/2015-07/msg00376.html) submitted to binutils will be encoding move as an 'or' instruction over [d]addu in assembly and various code stubs. This patch for gdb addresses that change for the mips specific parts of gdb. gdb/ChangeLog: * mips-linux-tdep.c (mips_linux_in_dynsym_stub): Recognise 'or' as move along with [d]addu.
2015-10-22mips: fix void*/gdb_byte* compilation errorsSimon Marchi1-3/+5
The error in mips64_linux_get_longjmp_target is fixed by changing "buf" to be a gdb_byte*, as usual. supply_32bit_reg and mips64_fill_gregset do some more complicated things however, so it's safer just to add the explicit cast and avoid changing the code too much. gdb/ChangeLog: * mips-linux-tdep.c (mips64_linux_get_longjmp_target): Change type of buf to gdb_byte*. (supply_32bit_reg): Add cast. (mips64_fill_gregset): Likewise.
2015-09-25Add some more casts (2/2)Simon Marchi1-1/+2
See previous patch's description. gdb/ChangeLog: * macrocmd.c (print_macro_callback): Add cast(s). * macrotab.c (macro_bcache_str): Likewise. (new_macro_definition): Likewise. * main.c (captured_main): Likewise. * maint.c (print_bfd_section_info): Likewise. * mdebugread.c (mdebug_build_psymtabs): Likewise. (basic_type): Likewise. * memattr.c (mem_region_cmp): Likewise. * memory-map.c (memory_map_start_memory): Likewise. (memory_map_end_memory): Likewise. (memory_map_start_property): Likewise. (memory_map_end_property): Likewise. (clear_result): Likewise. * memrange.c (compare_mem_ranges): Likewise. * mep-tdep.c (mep_analyze_frame_prologue): Likewise. * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Likewise. * mi/mi-console.c (mi_console_file_delete): Likewise. (mi_console_file_fputs): Likewise. (mi_console_raw_packet): Likewise. (mi_console_file_flush): Likewise. (mi_console_set_raw): Likewise. * mi/mi-interp.c (mi_interpreter_resume): Likewise. (mi_new_thread): Likewise. (mi_thread_exit): Likewise. (mi_record_changed): Likewise. (mi_inferior_added): Likewise. (mi_inferior_appeared): Likewise. (mi_inferior_exit): Likewise. (mi_inferior_removed): Likewise. (mi_interp_data): Likewise. (mi_on_normal_stop): Likewise. (mi_traceframe_changed): Likewise. (mi_tsv_created): Likewise. (mi_tsv_deleted): Likewise. (mi_tsv_modified): Likewise. (mi_breakpoint_created): Likewise. (mi_breakpoint_deleted): Likewise. (mi_breakpoint_modified): Likewise. (mi_output_running_pid): Likewise. (mi_inferior_count): Likewise. (mi_solib_loaded): Likewise. (mi_solib_unloaded): Likewise. (mi_command_param_changed): Likewise. (mi_memory_changed): Likewise. (report_initial_inferior): Likewise. (mi_ui_out): Likewise. (mi_set_logging): Likewise. * mi/mi-main.c (collect_cores): Likewise. (print_one_inferior): Likewise. (free_vector_of_ints): Likewise. (free_splay_tree): Likewise. (mi_execute_command): Likewise. * mi/mi-out.c (mi_table_body): Likewise. (mi_table_end): Likewise. (mi_table_header): Likewise. (mi_begin): Likewise. (mi_end): Likewise. (mi_field_int): Likewise. (mi_field_string): Likewise. (mi_field_fmt): Likewise. (mi_flush): Likewise. (mi_redirect): Likewise. (field_separator): Likewise. (mi_open): Likewise. (mi_close): Likewise. (mi_out_buffered): Likewise. (mi_out_rewind): Likewise. (mi_out_put): Likewise. (mi_version): Likewise. (mi_out_data_dtor): Likewise. * mi/mi-parse.c (mi_parse_cleanup): Likewise. * microblaze-tdep.c (microblaze_frame_cache): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. (lzma_close): Likewise. (lzma_stat): Likewise. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * mips-sde-tdep.c (mips_sde_frame_cache): Likewise. (mips_sde_elf_osabi_sniff_abi_tag_sections): Likewise. * mips-tdep.c (mips_insn16_frame_cache): Likewise. (mips_micro_frame_cache): Likewise. (mips_insn32_frame_cache): Likewise. (mips_stub_frame_cache): Likewise. (gdb_print_insn_mips): Likewise. (value_of_mips_user_reg): Likewise. (mips_gdbarch_init): Likewise. * mips64obsd-tdep.c (mips64obsd_supply_gregset): Likewise. * mipsnbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. * mn10300-linux-tdep.c (am33_supply_fpregset_method): Likewise. (am33_collect_gregset_method): Likewise. (am33_collect_fpregset_method): Likewise. * mn10300-tdep.c (mn10300_analyze_frame_prologue): Likewise. * moxie-tdep.c (moxie_frame_cache): Likewise. * msp430-tdep.c (msp430_get_opcode_byte): Likewise. (msp430_analyze_frame_prologue): Likewise. * mt-tdep.c (mt_frame_unwind_cache): Likewise. * nios2-linux-tdep.c (nios2_supply_gregset): Likewise. (nios2_collect_gregset): Likewise. * nios2-tdep.c (nios2_frame_unwind_cache): Likewise. (nios2_stub_frame_cache): Likewise. * objc-lang.c (find_methods): Likewise. * objfiles.c (objfiles_pspace_data_cleanup): Likewise. (get_objfile_pspace_data): Likewise. (get_objfile_bfd_data): Likewise. (objfile_bfd_data_free): Likewise. (add_to_objfile_sections): Likewise. (do_free_objfile_cleanup): Likewise. (resume_section_map_updates_cleanup): Likewise. * opencl-lang.c (builtin_opencl_type): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * osdata.c (osdata_start_osdata): Likewise. (osdata_start_item): Likewise. (osdata_start_column): Likewise. (osdata_end_column): Likewise. (clear_parsing_data): Likewise. (osdata_free_cleanup): Likewise. * parse.c (type_stack_cleanup): Likewise. (exp_uses_objfile_iter): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppu2spu_prev_arch): Likewise. (ppu2spu_this_id): Likewise. (ppu2spu_prev_register): Likewise. (ppu2spu_unwind_register): Likewise. (ppu2spu_sniffer): Likewise. (ppu2spu_dealloc_cache): Likewise. (ppc_linux_init_abi): Likewise. * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise. * progspace.c (restore_program_space): Likewise. * psymtab.c (find_pc_sect_psymtab): Likewise. (compare_psymbols): Likewise. (psymbol_bcache_full): Likewise. (allocate_psymtab): Likewise. (discard_psymtabs_upto): Likewise. * python/py-block.c (set_block): Likewise. (del_objfile_blocks): Likewise. * python/py-breakpoint.c (build_bp_list): Likewise. * python/py-inferior.c (inferior_to_inferior_object): Likewise. (build_inferior_list): Likewise. (py_free_inferior): Likewise. * python/py-objfile.c (py_free_objfile): Likewise. (objfile_to_objfile_object): Likewise. * python/py-prettyprint.c (py_restore_tstate): Likewise. * python/py-progspace.c (py_free_pspace): Likewise. (pspace_to_pspace_object): Likewise. * python/py-symbol.c (set_symbol): Likewise. (del_objfile_symbols): Likewise. * python/py-symtab.c (set_sal): Likewise. (set_symtab): Likewise. (del_objfile_symtab): Likewise. (del_objfile_sal): Likewise. * python/py-type.c (save_objfile_types): Likewise. (set_type): Likewise. * python/py-unwind.c (pyuw_prev_register): Likewise. (pyuw_on_new_gdbarch): Likewise. * python/py-utils.c (py_decref): Likewise. (py_xdecref): Likewise. (gdb_py_generic_dict): Likewise. * python/py-xmethods.c (gdbpy_free_xmethod_worker_data): Likewise. (gdbpy_clone_xmethod_worker_data): Likewise. (gdbpy_get_xmethod_arg_types): Likewise. (gdbpy_get_xmethod_result_type): Likewise. (gdbpy_invoke_xmethod): Likewise. * python/python.c (gdbpy_apply_type_printers): Likewise. (gdbpy_free_type_printers): Likewise. * record-btrace.c (record_btrace_disable_callback): Likewise. (bfcache_hash): Likewise. (bfcache_eq): Likewise. (btrace_get_frame_function): Likewise. (record_btrace_frame_unwind_stop_reason): Likewise. (record_btrace_frame_this_id): Likewise. (record_btrace_frame_prev_register): Likewise. (record_btrace_frame_dealloc_cache): Likewise. * record-full.c (record_full_message_wrapper): Likewise. (record_full_save_cleanups): Likewise. * regcache.c (regcache_descr): Likewise. (do_regcache_xfree): Likewise. (do_regcache_invalidate): Likewise. (do_cooked_read): Likewise. (regcache_transfer_regset): Likewise. * reggroups.c (reggroup_add): Likewise. (reggroup_next): Likewise. (reggroup_prev): Likewise. * remote-fileio.c (do_remote_fileio_request): Likewise. * remote-notif.c (remote_async_get_pending_events_handler): Likewise. (do_notif_event_xfree): Likewise. * remote.c (get_remote_arch_state): Likewise. (remote_pspace_data_cleanup): Likewise. (get_remote_exec_file): Likewise. (set_pspace_remote_exec_file): Likewise. (compare_pnums): Likewise. (clear_threads_listing_context): Likewise. (remote_newthread_step): Likewise. (start_thread): Likewise. (end_thread): Likewise. (remove_child_of_pending_fork): Likewise. (remove_stop_reply_for_inferior): Likewise. (remove_stop_reply_of_remote_state): Likewise. (remote_notif_remove_once_on_match): Likewise. (stop_reply_match_ptid_and_ws): Likewise. (kill_child_of_pending_fork): Likewise. (register_remote_g_packet_guess): Likewise. (remote_read_description_p): Likewise. (remote_read_description): Likewise. (free_actions_list_cleanup_wrapper): Likewise. (remote_async_serial_handler): Likewise. * rl78-tdep.c (rl78_get_opcode_byte): Likewise. (rl78_analyze_frame_prologue): Likewise. * rs6000-tdep.c (ppc_supply_gregset): Likewise. (ppc_supply_fpregset): Likewise. (ppc_supply_vsxregset): Likewise. (ppc_supply_vrregset): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (e500_move_ev_register): Likewise. (do_regcache_raw_write): Likewise. (rs6000_frame_cache): Likewise. (rs6000_epilogue_frame_cache): Likewise. (rs6000_gdbarch_init): Likewise. * rx-tdep.c (rx_get_opcode_byte): Likewise. (rx_analyze_frame_prologue): Likewise. (rx_frame_type): Likewise. (rx_frame_sniffer_common): Likewise. * s390-linux-tdep.c (s390_check_for_saved): Likewise. (s390_frame_unwind_cache): Likewise. (s390_stub_frame_unwind_cache): Likewise. (s390_sigtramp_frame_unwind_cache): Likewise. * score-tdep.c (score_make_prologue_cache): Likewise. * sentinel-frame.c (sentinel_frame_prev_register): Likewise. (sentinel_frame_prev_arch): Likewise. * ser-base.c (fd_event): Likewise. (push_event): Likewise. (ser_base_write): Likewise. * ser-pipe.c (pipe_close): Likewise. * serial.c (serial_write): Likewise. * sh-tdep.c (sh_frame_cache): Likewise. (sh_stub_this_id): Likewise. * sh64-tdep.c (sh64_frame_cache): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (library_list_start_list): Likewise. (solib_aix_free_library_list): Likewise. * solib-darwin.c (get_darwin_info): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-spu.c (append_ocl_sos): Likewise. * solib-svr4.c (svr4_pspace_data_cleanup): Likewise. (get_svr4_info): Likewise. (library_list_start_library): Likewise. (svr4_library_list_start_list): Likewise. (hash_probe_and_action): Likewise. (equal_probe_and_action): Likewise. (svr4_update_solib_event_breakpoint): Likewise. (set_solib_svr4_fetch_link_map_offsets): Likewise. (svr4_fetch_link_map_offsets): Likewise. (svr4_have_link_map_offsets): Likewise. * solib-target.c (library_list_start_segment): Likewise. (library_list_start_section): Likewise. (library_list_start_library): Likewise. (library_list_end_library): Likewise. (library_list_start_list): Likewise. (solib_target_free_library_list): Likewise. * solib.c (solib_ops): Likewise. (set_solib_ops): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc-tdep.c (sparc_frame_cache): Likewise. (sparc32_frame_cache): Likewise. (sparc32_supply_gregset): Likewise. (sparc32_collect_gregset): Likewise. (sparc32_supply_fpregset): Likewise. (sparc32_collect_fpregset): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * sparc64-tdep.c (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_cache): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_cache): Likewise. * sparc64obsd-tdep.c (sparc64obsd_frame_cache): Likewise. (sparc64obsd_trapframe_cache): Likewise. * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_cache): Likewise. * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_cache): Likewise. * spu-multiarch.c (spu_gdbarch): Likewise. * spu-tdep.c (spu_frame_unwind_cache): Likewise. (spu2ppu_prev_arch): Likewise. (spu2ppu_this_id): Likewise. (spu2ppu_prev_register): Likewise. (spu2ppu_dealloc_cache): Likewise. (spu_dis_asm_print_address): Likewise. (gdb_print_insn_spu): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (rs6000_builtin_type): Likewise. * stack.c (do_print_variable_and_value): Likewise. * stap-probe.c (get_stap_base_address_1): Likewise. * symfile-debug.c (debug_qf_has_symbols): Likewise. (debug_qf_find_last_source_symtab): Likewise. (debug_qf_forget_cached_source_info): Likewise. (debug_qf_map_symtabs_matching_filename): Likewise. (debug_qf_lookup_symbol): Likewise. (debug_qf_print_stats): Likewise. (debug_qf_dump): Likewise. (debug_qf_relocate): Likewise. (debug_qf_expand_symtabs_for_function): Likewise. (debug_qf_expand_all_symtabs): Likewise. (debug_qf_expand_symtabs_with_fullname): Likewise. (debug_qf_map_matching_symbols): Likewise. (debug_qf_expand_symtabs_matching): Likewise. (debug_qf_find_pc_sect_compunit_symtab): Likewise. (debug_qf_map_symbol_filenames): Likewise. (debug_sym_get_probes): Likewise. (debug_sym_new_init): Likewise. (debug_sym_init): Likewise. (debug_sym_read): Likewise. (debug_sym_read_psymbols): Likewise. (debug_sym_finish): Likewise. (debug_sym_offsets): Likewise. (debug_sym_read_linetable): Likewise. (debug_sym_relocate): Likewise. (uninstall_symfile_debug_logging): Likewise. * symfile-mem.c (symbol_file_add_from_memory_wrapper): Likewise. * symfile.c (place_section): Likewise. (add_section_size_callback): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (clear_memory_write_data): Likewise. (allocate_symtab): Likewise. * symmisc.c (maintenance_expand_file_matcher): Likewise. * symtab.c (lookup_symtab_callback): Likewise. (hash_demangled_name_entry): Likewise. (eq_demangled_name_entry): Likewise. (get_symbol_cache): Likewise. (symbol_cache_cleanup): Likewise. (set_symbol_cache_size): Likewise. (symbol_cache_flush): Likewise. (maintenance_print_symbol_cache): Likewise. (maintenance_print_symbol_cache_statistics): Likewise. (delete_filename_seen_cache): Likewise. (output_partial_symbol_filename): Likewise. (search_symbols_file_matches): Likewise. (search_symbols_name_matches): Likewise. (do_free_completion_list): Likewise. (maybe_add_partial_symtab_filename): Likewise. (get_main_info): Likewise. (main_info_cleanup): Likewise. * target-dcache.c (target_dcache_cleanup): Likewise. (target_dcache_init_p): Likewise. (target_dcache_invalidate): Likewise. (target_dcache_get): Likewise. (target_dcache_get_or_init): Likewise. * target-descriptions.c (target_find_description): Likewise. (tdesc_find_type): Likewise. (tdesc_data_cleanup): Likewise. (tdesc_find_arch_register): Likewise. (tdesc_register_name): Likewise. (tdesc_register_type): Likewise. (tdesc_register_reggroup_p): Likewise. (set_tdesc_pseudo_register_name): Likewise. (set_tdesc_pseudo_register_type): Likewise. (set_tdesc_pseudo_register_reggroup_p): Likewise. (tdesc_use_registers): Likewise. (free_target_description): Likewise. * target-memory.c (compare_block_starting_address): Likewise. (cleanup_request_data): Likewise. (cleanup_write_requests_vector): Likewise. * target.c (open_target): Likewise. (cleanup_restore_target_terminal): Likewise. (free_memory_read_result_vector): Likewise. * thread.c (disable_thread_stack_temporaries): Likewise. (finish_thread_state_cleanup): Likewise. (do_restore_current_thread_cleanup): Likewise. (restore_current_thread_cleanup_dtor): Likewise. (set_thread_refcount): Likewise. (tp_array_compar): Likewise. (do_captured_thread_select): Likewise. * tic6x-tdep.c (tic6x_frame_unwind_cache): Likewise. (tic6x_stub_this_id): Likewise. * tilegx-tdep.c (tilegx_frame_cache): Likewise. * top.c (do_restore_instream_cleanup): Likewise. (gdb_readline_wrapper_cleanup): Likewise. (kill_or_detach): Likewise. (print_inferior_quit_action): Likewise. * tracefile-tfile.c (match_blocktype): Likewise. (build_traceframe_info): Likewise. * tracefile.c (trace_file_writer_xfree): Likewise. * tracepoint.c (memrange_cmp): Likewise. (do_collect_symbol): Likewise. (do_clear_collection_list): Likewise. (do_restore_current_traceframe_cleanup): Likewise. (restore_current_traceframe_cleanup_dtor): Likewise. (free_current_marker): Likewise. (traceframe_info_start_memory): Likewise. (traceframe_info_start_tvar): Likewise. (free_result): Likewise. * tramp-frame.c (tramp_frame_cache): Likewise. * tui/tui-file.c (tui_file_delete): Likewise. (tui_fileopen): Likewise. (tui_sfileopen): Likewise. (tui_file_isatty): Likewise. (tui_file_rewind): Likewise. (tui_file_put): Likewise. (tui_file_fputs): Likewise. (tui_file_get_strbuf): Likewise. (tui_file_adjust_strbuf): Likewise. (tui_file_flush): Likewise. * tui/tui-layout.c (make_command_window): Likewise. (make_data_window): Likewise. (show_source_disasm_command): Likewise. (show_data): Likewise. (make_source_or_disasm_window): Likewise. (show_source_or_disasm_and_command): Likewise. * tui/tui-out.c (tui_field_int): Likewise. (tui_field_string): Likewise. (tui_field_fmt): Likewise. (tui_text): Likewise. * typeprint.c (hash_typedef_field): Likewise. (eq_typedef_field): Likewise. (do_free_typedef_hash): Likewise. (copy_typedef_hash_element): Likewise. (do_free_global_table): Likewise. (find_global_typedef): Likewise. (find_typedef_in_hash): Likewise. * ui-file.c (ui_file_write_for_put): Likewise. (do_ui_file_xstrdup): Likewise. (mem_file_delete): Likewise. (mem_file_rewind): Likewise. (mem_file_put): Likewise. (mem_file_write): Likewise. (stdio_file_delete): Likewise. (stdio_file_flush): Likewise. (stdio_file_read): Likewise. (stdio_file_write): Likewise. (stdio_file_write_async_safe): Likewise. (stdio_file_fputs): Likewise. (stdio_file_isatty): Likewise. (stdio_file_fseek): Likewise. (tee_file_delete): Likewise. (tee_file_flush): Likewise. (tee_file_write): Likewise. (tee_file_fputs): Likewise. (tee_file_isatty): Likewise. * ui-out.c (do_cleanup_table_end): Likewise. (do_cleanup_end): Likewise. * user-regs.c (user_reg_add): Likewise. (user_reg_map_name_to_regnum): Likewise. (usernum_to_user_reg): Likewise. (maintenance_print_user_registers): Likewise. * utils.c (do_bfd_close_cleanup): Likewise. (do_fclose_cleanup): Likewise. (do_obstack_free): Likewise. (do_ui_file_delete): Likewise. (do_ui_out_redirect_pop): Likewise. (do_free_section_addr_info): Likewise. (restore_integer): Likewise. (do_unpush_target): Likewise. (do_htab_delete_cleanup): Likewise. (do_restore_ui_file): Likewise. (do_value_free): Likewise. (do_free_so): Likewise. (free_current_contents): Likewise. (do_regfree_cleanup): Likewise. (core_addr_hash): Likewise. (core_addr_eq): Likewise. (do_free_char_ptr_vec): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * varobj.c (do_free_variable_cleanup): Likewise. * vax-tdep.c (vax_supply_gregset): Likewise. (vax_frame_cache): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_cache): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_values_cleanup): Likewise. (gdb_xml_start_element): Likewise. (gdb_xml_start_element_wrapper): Likewise. (gdb_xml_end_element): Likewise. (gdb_xml_end_element_wrapper): Likewise. (gdb_xml_cleanup): Likewise. (gdb_xml_fetch_external_entity): Likewise. (gdb_xml_parse_attr_enum): Likewise. (xinclude_start_include): Likewise. (xinclude_end_include): Likewise. (xml_xinclude_default): Likewise. (xml_xinclude_start_doctype): Likewise. (xml_xinclude_end_doctype): Likewise. (xml_xinclude_cleanup): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (free_syscalls_info): Likewise. (syscall_start_syscall): Likewise. * xml-tdesc.c (tdesc_end_arch): Likewise. (tdesc_end_osabi): Likewise. (tdesc_end_compatible): Likewise. (tdesc_start_target): Likewise. (tdesc_start_feature): Likewise. (tdesc_start_reg): Likewise. (tdesc_start_union): Likewise. (tdesc_start_struct): Likewise. (tdesc_start_flags): Likewise. (tdesc_start_field): Likewise. (tdesc_start_vector): Likewise. (fetch_available_features_from_target): Likewise. * xstormy16-tdep.c (xstormy16_frame_cache): Likewise. * xtensa-tdep.c (xtensa_supply_gregset): Likewise. (xtensa_frame_cache): Likewise. (xtensa_frame_prev_register): Likewise. (xtensa_extract_return_value): Likewise.
2015-02-04Fix internal error when core file section is too bigAndreas Arnez1-8/+8
As reported in PR 17808, a test case with a forged (invalid) core file can crash GDB with an assertion failure. In that particular case the prstatus of an i386 core file looks like that from an AMD64 core file. Consequently the respective regset supply function i386_supply_gregset is invoked with a larger buffer than usual. But i386_supply_gregset asserts a specific buffer size, and this assertion fails. The patch relaxes all buffer size assertions in regset supply functions such that they merely check for a sufficiently large buffer. For consistency the regset collect functions are adjusted as well. gdb/ChangeLog: PR corefiles/17808: * gdbarch.sh (iterate_over_regset_sections_cb): Document this function type, particularly its SIZE parameter. * gdbarch.h: Regenerate. * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare actual against required size using ">=" instead of "==". (amd64_collect_fpregset): Likewise. * i386-tdep.c (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_supply_fpregset): Likewise. (i386_collect_fpregset): Likewise. * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise. (mips_fill_gregset_wrapper): Likewise. (mips_supply_fpregset_wrapper): Likewise. (mips_fill_fpregset_wrapper): Likewise. (mips64_supply_gregset_wrapper): Likewise. (mips64_fill_gregset_wrapper): Likewise. (mips64_supply_fpregset_wrapper): Likewise. (mips64_fill_fpregset_wrapper): Likewise. * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise. (am33_supply_fpregset_method): Likewise. (am33_collect_gregset_method): Likewise. (am33_collect_fpregset_method): Likewise.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-12-12MIPS: Keep the ISA bit in compressed code addressesMaciej W. Rozycki1-1/+7
1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-03MIPS: Add support for microMIPS Linux signal trampolinesMaciej W. Rozycki1-6/+107
The necessity for this change has been revealed in the course of investigation related to proposed changes in the treatment of the ISA bit encoded in function symbols on the MIPS target. This change adds support for Linux signal trampolines encoded with the microMIPS instruction set. Such trampolines are used by the Linux kernel if compiled as a microMIPS binary (even if the binary run/debugged itself contains no microMIPS code at all). To see if we need to check whether the execution mode selected matches the given trampoline I have checked what the bit patterns of all the trampoline sequences decode to in the opposite instruction set. This produced useless or at least unusual code in most cases, for example: microMIPS/EB, o32 sigreturn, decoded as MIPS code: 30401017 andi zero,v0,0x1017 00008b7c dsll32 s1,zero,0xd MIPS/EL, o32 sigreturn, decoded as microMIPS code: 1017 2402 addi zero,s7,9218 000c 0000 sll zero,t0,0x0 However in some corner cases reasonable code can mimic a trampoline, for example: MIPS/EB, n32 rt_sigreturn, decoded as microMIPS code: 2402 sll s0,s0,1 1843 0000 sb v0,0(v1) 000c 0f3c jr t0 -- here the first instruction is a 16-bit one, making things nastier even as there are some other microMIPS instructions whose first 16-bit halfword is 0x000c and therefore matches this whole trampoline pattern. To overcome this problem I have decided the signal trampoline unwinder has to ask the platform backend whether it can apply a given trampoline pattern to the code location being concerned or not. Anticipating the acceptance of the ISA bit proposal I decided the handler not to merely be a predicate, but also to be able to provide an adjusted PC if required. I decided that returning zero will mean that the trampoline pattern is not applicable and any other value is the adjusted PC to use; a handler may return the value requested if the trampoline pattern and the PC requested as-is are both accepted. This changes the semantics of the trampoline unwinder a bit in that the zero PC now has a special value. I think this should be safe as a NULL pointer is generally supposed to be invalid. * tramp-frame.h (tramp_frame): Add `validate' member. * tramp-frame.c (tramp_frame_start): Validate trampoline before scanning. * mips-linux-tdep.c (MICROMIPS_INST_LI_V0): New macro. (MICROMIPS_INST_POOL32A, MICROMIPS_INST_SYSCALL): Likewise. (mips_linux_o32_sigframe): Initialize `validate' member. (mips_linux_o32_rt_sigframe): Likewise. (mips_linux_n32_rt_sigframe): Likewise. (mips_linux_n64_rt_sigframe): Likewise. (micromips_linux_o32_sigframe): New variable. (micromips_linux_o32_rt_sigframe): Likewise. (micromips_linux_n32_rt_sigframe): Likewise. (micromips_linux_n64_rt_sigframe): Likewise. (mips_linux_o32_sigframe_init): Handle microMIPS trampolines. (mips_linux_n32n64_sigframe_init): Likewise. (mips_linux_sigframe_validate): New function. (micromips_linux_sigframe_validate): Likewise. (mips_linux_init_abi): Install microMIPS trampoline unwinders.
2014-11-20Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead ↵Sergio Durigan Junior1-3/+3
of global This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function.
2014-09-30MIPS: Migrate from 'regset_from_core_section' to 'iterate_over_regset_sections'Andreas Arnez1-30/+17
For MIPS targets, no longer define the gdbarch method 'regset_from_core_section', but the iterator method instead. gdb/ChangeLog: * mips-linux-tdep.c (mips_linux_regset_from_core_section): Remove. (mips_linux_iterate_over_regset_sections): New. (mips_linux_init_abi): Adjust gdbarch initialization. * mips64obsd-tdep.c (mips64obsd_regset_from_core_section): Remove. (mips64obsd_iterate_over_regset_sections): New. (mips64obsd_init_abi): Adjust. * mipsnbsd-tdep.c (mipsnbsd_regset_from_core_section): Remove. (mipsnbsd_iterate_over_regset_sections): New. (mipsnbsd_init_abi): Adjust.
2014-08-07Include string.h in common-defs.hGary Benson1-1/+0
This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise.
2014-08-07Include gdb_assert.h in common-defs.hGary Benson1-1/+0
This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h.
2014-05-21MIPS: Replace regset_alloc() invocations by static regset structures.Andreas Arnez1-29/+24
After removal of the regset_alloc invocations, the appropriate tdep fields become obsolete and are thus removed.
2014-02-26start change to progspace independenceTom Tromey1-1/+1
This patch starts changing minimal symbols to be independent of the program space. Specifically, it adds a new objfile parameter to MSYMBOL_VALUE_ADDRESS and changes all the code to use it. This is needed so we can change gdb to apply the section offset when a minsym's address is computed, as opposed to baking the offsets into the symbol itself. A few spots still need the unrelocated address. For these, we introduce MSYMBOL_VALUE_RAW_ADDRESS. As a convenience, we also add the new macro BMSYMBOL_VALUE_ADDRESS, which computes the address of a bound minimal symbol. This just does the obvious thing with the fields. Note that this change does not actually enable program space independence. That requires more changes to gdb. However, to ensure that these changes compile properly, this patch does add the needed section lookup code to MSYMBOL_VALUE_ADDRESS -- it just ensures it has no effect at runtime by multiplying the offset by 0. 2014-02-26 Tom Tromey <tromey@redhat.com> * ada-lang.c (ada_main_name): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * arm-tdep.c (skip_prologue_function, arm_skip_stub): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * blockframe.c (get_pc_function_start) (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr, end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. * dwarf2read.c (dw2_find_pc_sect_symtab): Update. * elfread.c (elf_gnu_ifunc_record_cache) (elf_gnu_ifunc_resolve_by_got): Update. * findvar.c (default_read_var_value): Update. * frame.c (inside_main_func): Update. * frv-tdep.c (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa64_hpux_search_dummy_call_sequence) (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_read_descriptor, jit_breakpoint_re_set_internal): Update. * linespec.c (minsym_found, add_minsym): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value) (m32c_m16c_address_to_pointer): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (lookup_minimal_symbol_by_pc_name): Update. (frob_address): New function. (lookup_minimal_symbol_by_pc_section_1): Use raw addresses, frob_address. Rename parameter to "pc_in". (compare_minimal_symbols, compact_minimal_symbols): Use raw addresses. (find_solib_trampoline_target, minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_skip_pic_trampoline_code): Update. * objc-lang.c (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_lookup) (ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic, msym_info) (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer) (find_pc_sect_psymtab, find_pc_sect_symtab_from_partial): Change msymbol parameter to bound_minimal_symbol. * ravenscar-thread.c (get_running_thread_id): Update. * remote.c (remote_check_symbols): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Use raw address. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base, main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook) (link_map_start): Update. * solib-spu.c (spu_enable_break, ocl_enable_break): Update. * solib-svr4.c (elf_locate_base, enable_break): Update. * spu-tdep.c (spu_get_overlay_table, spu_catch_start) (flush_ea_cache): Update. * stabsread.c (define_symbol, scan_file_globals): Update. * stack.c (find_frame_funname): Update. * symfile-debug.c (debug_qf_expand_symtabs_matching) (debug_qf_find_pc_sect_symtab): Update. * symfile.c (simple_read_overlay_table) (simple_overlay_update): Update. * symfile.h (struct quick_symbol_functions) <find_pc_sect_symtab>: Change type of msymbol to bound_minimal_symbol. * symmisc.c (dump_msymbols): Update. * symtab.c (find_pc_sect_symtab_via_partial) (find_pc_sect_psymtab, find_pc_sect_line, skip_prologue_sal) (search_symbols, print_msymbol_info): Update. * symtab.h (MSYMBOL_VALUE_RAW_ADDRESS): New macro. (MSYMBOL_VALUE_ADDRESS): Redefine. (BMSYMBOL_VALUE_ADDRESS): New macro. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address) (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field, value_fn_field): Update.
2014-02-26use bound_minsym as result for lookup_minimal_symbol et alTom Tromey1-2/+2
This patch changes a few minimal symbol lookup functions to return a bound_minimal_symbol rather than a pointer to the minsym. This change helps prepare gdb for computing a minimal symbol's address at the point of use. Note that this changes even those functions that ostensibly search a single objfile. That was necessary because, in fact, those functions can search an objfile and its separate debug objfiles; and it is important for the caller to know in which objfile the minimal symbol was actually found. The bulk of this patch is mechanical. 2014-02-26 Tom Tromey <tromey@redhat.com> * ada-lang.c (ada_update_initial_language): Update. (ada_main_name, ada_has_this_exception_support): Update. * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * arm-tdep.c (arm_skip_stub): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * breakpoint.c (struct breakpoint_objfile_data) <overlay_msym, longjmp_msym, terminate_msym, exception_msym>: Change type to bound_minimal_symbol. (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * c-exp.y (classify_name): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * d-lang.c (d_main_name): Update. * dbxread.c (find_stab_function_addr, end_psymtab): Update. * dec-thread.c (enable_dec_thread): Update. * dwarf2loc.c (call_site_to_target_addr): Update. * elfread.c (elf_gnu_ifunc_resolve_by_got): Update. * eval.c (evaluate_subexp_standard): Update. * findvar.c (struct minsym_lookup_data) <result>: Change type to bound_minimal_symbol. <objfile>: Remove. (minsym_lookup_iterator_cb, default_read_var_value): Update. * frame.c (inside_main_func): Update. * frv-tdep.c (frv_frame_this_id): Update. * gcore.c (call_target_sbrk): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline): Update. * go-lang.c (go_main_name): Update. * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code) (hppa_hpux_find_import_stub_for_addr): Update. * hppa-tdep.c (hppa_extract_17, hppa_lookup_stub_minimal_symbol): Update. Change return type. * hppa-tdep.h (hppa_lookup_stub_minimal_symbol): Change return type. * jit.c (jit_breakpoint_re_set_internal): Update. * linux-fork.c (inferior_call_waitpid, checkpoint_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update * m32c-tdep.c (m32c_return_value) (m32c_m16c_address_to_pointer): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * minsyms.c (lookup_minimal_symbol_internal): Rename to lookup_minimal_symbol. Change return type. (lookup_minimal_symbol): Remove. (lookup_bound_minimal_symbol): Update. (lookup_minimal_symbol_text): Change return type. (lookup_minimal_symbol_solib_trampoline): Change return type. * minsyms.h (lookup_minimal_symbol, lookup_minimal_symbol_text) (lookup_minimal_symbol_solib_trampoline): Change return type. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * objc-lang.c (lookup_objc_class, lookup_child_selector) (value_nsstring, find_imps): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-lang.c (pascal_main_name): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * proc-service.c (ps_pglobal_lookup): Update. * ravenscar-thread.c (get_running_thread_msymbol): Change return type. (has_ravenscar_runtime, get_running_thread_id): Update. * remote.c (remote_check_symbols): Update. * sol-thread.c (ps_pglobal_lookup): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base, frv_relocate_section_addresses): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook) (som_solib_desire_dynamic_linker_symbols, link_map_start): Update. * solib-spu.c (spu_enable_break): Update. * solib-svr4.c (elf_locate_base, enable_break): Update. * spu-tdep.c (spu_get_overlay_table, spu_catch_start) (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. * symfile.c (simple_read_overlay_table): Update. * symtab.c (find_pc_sect_line): Update. * tracepoint.c (scope_info): Update. * tui-disasm.c (tui_get_begin_asm_address): Update. * value.c (value_static_field): Update.
2014-02-26change minsym representationTom Tromey1-1/+1
In a later patch we're going to change the minimal symbol address calculation to apply section offsets at the point of use. To make it simpler to catch potential problem spots, this patch changes the representation of minimal symbols and introduces new minimal-symbol-specific variants of the various accessors. This is necessary because it would be excessively ambitious to try to convert all the symbol types at once. The core of this change is just renaming a field in minimal_symbol; the rest is just a fairly mechanical rewording. 2014-02-26 Tom Tromey <tromey@redhat.com> * symtab.h (struct minimal_symbol) <mginfo>: Rename from ginfo. (MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES) (MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE) (MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME) (MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME) (MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME) (MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros. * ada-lang.c (ada_main_name): Update. (ada_lookup_simple_minsym): Update. (ada_make_symbol_completion_list): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * amd64-windows-tdep.c (amd64_skip_main_prologue): Update. * arm-tdep.c (skip_prologue_function): Update. (arm_skip_stack_protector, arm_skip_stub): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. (arm_wince_skip_main_prologue): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * block.c (call_site_for_pc): Update. * blockframe.c (get_pc_function_start): Update. (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_std_terminate_master_breakpoint): Update. (create_exception_master_breakpoint): Update. (resolve_sal_pc): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * btrace.c (ftrace_print_function_name, ftrace_function_switched): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr): Update. (end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. (func_verify_no_selftailcall): Update. (tailcall_dump): Update. (call_site_find_chain_1): Update. (dwarf_expr_reg_to_entry_parameter): Update. * elfread.c (elf_gnu_ifunc_record_cache): Update. (elf_gnu_ifunc_resolve_by_got): Update. * f-valprint.c (info_common_command): Update. * findvar.c (read_var_value): Update. * frame.c (get_prev_frame_1): Update. (inside_main_func): Update. * frv-tdep.c (frv_skip_main_prologue): Update. (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v2-abi.c (gnuv2_value_rtti_type): Update. * gnu-v3-abi.c (gnuv3_rtti_type): Update. (gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update. (hppa64_hpux_in_solib_call_trampoline): Update. (hppa_hpux_skip_trampoline_code): Update. (hppa64_hpux_search_dummy_call_sequence): Update. (hppa_hpux_find_import_stub_for_addr): Update. (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address) (hppa_lookup_stub_minimal_symbol): Update. * i386-tdep.c (i386_skip_main_prologue): Update. (i386_pe_skip_trampoline_code): Update. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update. * infcall.c (get_function_name): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_breakpoint_re_set_internal): Update. (jit_inferior_init): Update. * linespec.c (minsym_found): Update. (add_minsym): Update. * linux-fork.c (info_checkpoints_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value): Update. (m32c_m16c_address_to_pointer): Update. (m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (add_minsym_to_hash_table): Update. (add_minsym_to_demangled_hash_table): Update. (msymbol_objfile): Update. (lookup_minimal_symbol): Update. (iterate_over_minimal_symbols): Update. (lookup_minimal_symbol_text): Update. (lookup_minimal_symbol_by_pc_name): Update. (lookup_minimal_symbol_solib_trampoline): Update. (lookup_minimal_symbol_by_pc_section_1): Update. (lookup_minimal_symbol_and_objfile): Update. (prim_record_minimal_symbol_full): Update. (compare_minimal_symbols): Update. (compact_minimal_symbols): Update. (build_minimal_symbol_hash_tables): Update. (install_minimal_symbols): Update. (terminate_minimal_symbol_table): Update. (find_solib_trampoline_target): Update. (minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_stub_frame_sniffer): Update. (mips_skip_pic_trampoline_code): Update. * msp430-tdep.c (msp430_skip_trampoline_code): Update. * objc-lang.c (selectors_info): Update. (classes_info): Update. (find_methods): Update. (find_imps): Update. (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * objfiles.h (ALL_OBJFILE_MSYMBOLS): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code) (ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic): Update. (sym_info): Update. (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer): Update. (find_pc_sect_psymtab): Update. * python/py-framefilter.c (py_print_frame): Update. * ravenscar-thread.c (get_running_thread_id): Update. * record-btrace.c (btrace_call_history, btrace_get_bfun_name): Update. * remote.c (remote_check_symbols): Update. * rs6000-tdep.c (rs6000_skip_main_prologue): Update. (rs6000_skip_trampoline_code): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base): Update. (main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook): Update. (som_solib_desire_dynamic_linker_symbols): Update. (link_map_start): Update. * solib-spu.c (spu_enable_break): Update. (ocl_enable_break): Update. * solib-svr4.c (elf_locate_base): Update. (enable_break): Update. * spu-tdep.c (spu_get_overlay_table): Update. (spu_catch_start): Update. (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. (scan_file_globals): Update. * stack.c (find_frame_funname): Update. (frame_info): Update. * symfile.c (simple_read_overlay_table): Update. (simple_overlay_update): Update. * symmisc.c (dump_msymbols): Update. * symtab.c (fixup_section): Update. (find_pc_sect_line): Update. (skip_prologue_sal): Update. (search_symbols): Update. (print_msymbol_info): Update. (rbreak_command): Update. (MCOMPLETION_LIST_ADD_SYMBOL): New macro. (completion_list_objc_symbol): Update. (default_make_symbol_completion_list_break_on): Update. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address): Update. (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field): Update. (value_fn_field): Update.
2014-01-07Remove duplicated #include's from GDBHonggyu Kim1-1/+0
This patch simply removes duplicated #include statements in the gdb/ directory. If there are two duplicated #include statements, this patch keeps the first #include and removes the second. Those duplicates have been found by using the checkincludes.pl tool from the Linux kernel and double checked manually once again if the #include statements are affected by #ifdef macros. 2014-01-06 Honggyu Kim <hong.gyu.kim@lge.com> * ada-lang.c: Remove duplicated include statements. * alphabsd-nat.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64fbsd-nat.c: Ditto. * auto-load.c: Ditto. * ax-gdb.c: Ditto. * breakpoint.c: Ditto. * dbxread.c: Ditto. * fork-child.c: Ditto. * gdb_usleep.c: Ditto. * i386-darwin-tdep.c: Ditto. * i386fbsd-nat.c: Ditto. * infcmd.c: Ditto. * inferior.c: Ditto. * jv-lang.c: Ditto. * linux-nat.c: Ditto. * linux-tdep.c: Ditto. * m68kbsd-nat.c: Ditto. * m68klinux-nat.c: Ditto. * microblaze-tdep.c: Ditto. * mips-linux-tdep.c: Ditto. * mn10300-tdep.c: Ditto. * nto-tdep.c: Ditto. * opencl-lang.c: Ditto. * osdata.c: Ditto. * printcmd.c: Ditto. * regcache.c: Ditto. * remote-m32r-sdi.c: Ditto. * remote.c: Ditto. * symfile.c: Ditto. * symtab.c: Ditto. * tilegx-linux-nat.c: Ditto. * tilegx-tdep.c: Ditto. * tracepoint.c: Ditto. * valops.c: Ditto. * vaxbsd-nat.c: Ditto. * windows-nat.c: Ditto. * xtensa-tdep.c: Ditto.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-18remove gdb_string.hTom Tromey1-1/+1
This removes gdb_string.h. This patch is purely mechanical. I created it by running the two commands: git rm common/gdb_string.h perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl] 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_string.h: Remove. * aarch64-tdep.c: Use string.h, not gdb_string.h. * ada-exp.y: Use string.h, not gdb_string.h. * ada-lang.c: Use string.h, not gdb_string.h. * ada-lex.l: Use string.h, not gdb_string.h. * ada-typeprint.c: Use string.h, not gdb_string.h. * ada-valprint.c: Use string.h, not gdb_string.h. * aix-thread.c: Use string.h, not gdb_string.h. * alpha-linux-tdep.c: Use string.h, not gdb_string.h. * alpha-mdebug-tdep.c: Use string.h, not gdb_string.h. * alpha-nat.c: Use string.h, not gdb_string.h. * alpha-osf1-tdep.c: Use string.h, not gdb_string.h. * alpha-tdep.c: Use string.h, not gdb_string.h. * alphanbsd-tdep.c: Use string.h, not gdb_string.h. * amd64-dicos-tdep.c: Use string.h, not gdb_string.h. * amd64-linux-nat.c: Use string.h, not gdb_string.h. * amd64-linux-tdep.c: Use string.h, not gdb_string.h. * amd64-nat.c: Use string.h, not gdb_string.h. * amd64-sol2-tdep.c: Use string.h, not gdb_string.h. * amd64fbsd-tdep.c: Use string.h, not gdb_string.h. * amd64obsd-tdep.c: Use string.h, not gdb_string.h. * arch-utils.c: Use string.h, not gdb_string.h. * arm-linux-nat.c: Use string.h, not gdb_string.h. * arm-linux-tdep.c: Use string.h, not gdb_string.h. * arm-tdep.c: Use string.h, not gdb_string.h. * arm-wince-tdep.c: Use string.h, not gdb_string.h. * armbsd-tdep.c: Use string.h, not gdb_string.h. * armnbsd-nat.c: Use string.h, not gdb_string.h. * armnbsd-tdep.c: Use string.h, not gdb_string.h. * armobsd-tdep.c: Use string.h, not gdb_string.h. * avr-tdep.c: Use string.h, not gdb_string.h. * ax-gdb.c: Use string.h, not gdb_string.h. * ax-general.c: Use string.h, not gdb_string.h. * bcache.c: Use string.h, not gdb_string.h. * bfin-tdep.c: Use string.h, not gdb_string.h. * breakpoint.c: Use string.h, not gdb_string.h. * build-id.c: Use string.h, not gdb_string.h. * buildsym.c: Use string.h, not gdb_string.h. * c-exp.y: Use string.h, not gdb_string.h. * c-lang.c: Use string.h, not gdb_string.h. * c-typeprint.c: Use string.h, not gdb_string.h. * c-valprint.c: Use string.h, not gdb_string.h. * charset.c: Use string.h, not gdb_string.h. * cli-out.c: Use string.h, not gdb_string.h. * cli/cli-cmds.c: Use string.h, not gdb_string.h. * cli/cli-decode.c: Use string.h, not gdb_string.h. * cli/cli-dump.c: Use string.h, not gdb_string.h. * cli/cli-interp.c: Use string.h, not gdb_string.h. * cli/cli-logging.c: Use string.h, not gdb_string.h. * cli/cli-script.c: Use string.h, not gdb_string.h. * cli/cli-setshow.c: Use string.h, not gdb_string.h. * cli/cli-utils.c: Use string.h, not gdb_string.h. * coffread.c: Use string.h, not gdb_string.h. * common/common-utils.c: Use string.h, not gdb_string.h. * common/filestuff.c: Use string.h, not gdb_string.h. * common/linux-procfs.c: Use string.h, not gdb_string.h. * common/linux-ptrace.c: Use string.h, not gdb_string.h. * common/signals.c: Use string.h, not gdb_string.h. * common/vec.h: Use string.h, not gdb_string.h. * core-regset.c: Use string.h, not gdb_string.h. * corefile.c: Use string.h, not gdb_string.h. * corelow.c: Use string.h, not gdb_string.h. * cp-abi.c: Use string.h, not gdb_string.h. * cp-support.c: Use string.h, not gdb_string.h. * cp-valprint.c: Use string.h, not gdb_string.h. * cris-tdep.c: Use string.h, not gdb_string.h. * d-lang.c: Use string.h, not gdb_string.h. * dbxread.c: Use string.h, not gdb_string.h. * dcache.c: Use string.h, not gdb_string.h. * demangle.c: Use string.h, not gdb_string.h. * dicos-tdep.c: Use string.h, not gdb_string.h. * disasm.c: Use string.h, not gdb_string.h. * doublest.c: Use string.h, not gdb_string.h. * dsrec.c: Use string.h, not gdb_string.h. * dummy-frame.c: Use string.h, not gdb_string.h. * dwarf2-frame.c: Use string.h, not gdb_string.h. * dwarf2loc.c: Use string.h, not gdb_string.h. * dwarf2read.c: Use string.h, not gdb_string.h. * elfread.c: Use string.h, not gdb_string.h. * environ.c: Use string.h, not gdb_string.h. * eval.c: Use string.h, not gdb_string.h. * event-loop.c: Use string.h, not gdb_string.h. * exceptions.c: Use string.h, not gdb_string.h. * exec.c: Use string.h, not gdb_string.h. * expprint.c: Use string.h, not gdb_string.h. * f-exp.y: Use string.h, not gdb_string.h. * f-lang.c: Use string.h, not gdb_string.h. * f-typeprint.c: Use string.h, not gdb_string.h. * f-valprint.c: Use string.h, not gdb_string.h. * fbsd-nat.c: Use string.h, not gdb_string.h. * findcmd.c: Use string.h, not gdb_string.h. * findvar.c: Use string.h, not gdb_string.h. * fork-child.c: Use string.h, not gdb_string.h. * frame.c: Use string.h, not gdb_string.h. * frv-linux-tdep.c: Use string.h, not gdb_string.h. * frv-tdep.c: Use string.h, not gdb_string.h. * gdb.c: Use string.h, not gdb_string.h. * gdb_bfd.c: Use string.h, not gdb_string.h. * gdbarch.c: Use string.h, not gdb_string.h. * gdbtypes.c: Use string.h, not gdb_string.h. * gnu-nat.c: Use string.h, not gdb_string.h. * gnu-v2-abi.c: Use string.h, not gdb_string.h. * gnu-v3-abi.c: Use string.h, not gdb_string.h. * go-exp.y: Use string.h, not gdb_string.h. * go-lang.c: Use string.h, not gdb_string.h. * go32-nat.c: Use string.h, not gdb_string.h. * hppa-hpux-tdep.c: Use string.h, not gdb_string.h. * hppa-linux-nat.c: Use string.h, not gdb_string.h. * hppanbsd-tdep.c: Use string.h, not gdb_string.h. * hppaobsd-tdep.c: Use string.h, not gdb_string.h. * i386-cygwin-tdep.c: Use string.h, not gdb_string.h. * i386-dicos-tdep.c: Use string.h, not gdb_string.h. * i386-linux-nat.c: Use string.h, not gdb_string.h. * i386-linux-tdep.c: Use string.h, not gdb_string.h. * i386-nto-tdep.c: Use string.h, not gdb_string.h. * i386-sol2-tdep.c: Use string.h, not gdb_string.h. * i386-tdep.c: Use string.h, not gdb_string.h. * i386bsd-tdep.c: Use string.h, not gdb_string.h. * i386gnu-nat.c: Use string.h, not gdb_string.h. * i386nbsd-tdep.c: Use string.h, not gdb_string.h. * i386obsd-tdep.c: Use string.h, not gdb_string.h. * i387-tdep.c: Use string.h, not gdb_string.h. * ia64-libunwind-tdep.c: Use string.h, not gdb_string.h. * ia64-linux-nat.c: Use string.h, not gdb_string.h. * inf-child.c: Use string.h, not gdb_string.h. * inf-ptrace.c: Use string.h, not gdb_string.h. * inf-ttrace.c: Use string.h, not gdb_string.h. * infcall.c: Use string.h, not gdb_string.h. * infcmd.c: Use string.h, not gdb_string.h. * inflow.c: Use string.h, not gdb_string.h. * infrun.c: Use string.h, not gdb_string.h. * interps.c: Use string.h, not gdb_string.h. * iq2000-tdep.c: Use string.h, not gdb_string.h. * irix5-nat.c: Use string.h, not gdb_string.h. * jv-exp.y: Use string.h, not gdb_string.h. * jv-lang.c: Use string.h, not gdb_string.h. * jv-typeprint.c: Use string.h, not gdb_string.h. * jv-valprint.c: Use string.h, not gdb_string.h. * language.c: Use string.h, not gdb_string.h. * linux-fork.c: Use string.h, not gdb_string.h. * linux-nat.c: Use string.h, not gdb_string.h. * lm32-tdep.c: Use string.h, not gdb_string.h. * m2-exp.y: Use string.h, not gdb_string.h. * m2-typeprint.c: Use string.h, not gdb_string.h. * m32c-tdep.c: Use string.h, not gdb_string.h. * m32r-linux-nat.c: Use string.h, not gdb_string.h. * m32r-linux-tdep.c: Use string.h, not gdb_string.h. * m32r-rom.c: Use string.h, not gdb_string.h. * m32r-tdep.c: Use string.h, not gdb_string.h. * m68hc11-tdep.c: Use string.h, not gdb_string.h. * m68k-tdep.c: Use string.h, not gdb_string.h. * m68kbsd-tdep.c: Use string.h, not gdb_string.h. * m68klinux-nat.c: Use string.h, not gdb_string.h. * m68klinux-tdep.c: Use string.h, not gdb_string.h. * m88k-tdep.c: Use string.h, not gdb_string.h. * macrocmd.c: Use string.h, not gdb_string.h. * main.c: Use string.h, not gdb_string.h. * mdebugread.c: Use string.h, not gdb_string.h. * mem-break.c: Use string.h, not gdb_string.h. * memattr.c: Use string.h, not gdb_string.h. * memory-map.c: Use string.h, not gdb_string.h. * mep-tdep.c: Use string.h, not gdb_string.h. * mi/mi-cmd-break.c: Use string.h, not gdb_string.h. * mi/mi-cmd-disas.c: Use string.h, not gdb_string.h. * mi/mi-cmd-env.c: Use string.h, not gdb_string.h. * mi/mi-cmd-stack.c: Use string.h, not gdb_string.h. * mi/mi-cmd-var.c: Use string.h, not gdb_string.h. * mi/mi-cmds.c: Use string.h, not gdb_string.h. * mi/mi-console.c: Use string.h, not gdb_string.h. * mi/mi-getopt.c: Use string.h, not gdb_string.h. * mi/mi-interp.c: Use string.h, not gdb_string.h. * mi/mi-main.c: Use string.h, not gdb_string.h. * mi/mi-parse.c: Use string.h, not gdb_string.h. * microblaze-rom.c: Use string.h, not gdb_string.h. * microblaze-tdep.c: Use string.h, not gdb_string.h. * mingw-hdep.c: Use string.h, not gdb_string.h. * minidebug.c: Use string.h, not gdb_string.h. * minsyms.c: Use string.h, not gdb_string.h. * mips-irix-tdep.c: Use string.h, not gdb_string.h. * mips-linux-tdep.c: Use string.h, not gdb_string.h. * mips-tdep.c: Use string.h, not gdb_string.h. * mips64obsd-tdep.c: Use string.h, not gdb_string.h. * mipsnbsd-tdep.c: Use string.h, not gdb_string.h. * mipsread.c: Use string.h, not gdb_string.h. * mn10300-linux-tdep.c: Use string.h, not gdb_string.h. * mn10300-tdep.c: Use string.h, not gdb_string.h. * monitor.c: Use string.h, not gdb_string.h. * moxie-tdep.c: Use string.h, not gdb_string.h. * mt-tdep.c: Use string.h, not gdb_string.h. * nbsd-tdep.c: Use string.h, not gdb_string.h. * nios2-linux-tdep.c: Use string.h, not gdb_string.h. * nto-procfs.c: Use string.h, not gdb_string.h. * nto-tdep.c: Use string.h, not gdb_string.h. * objc-lang.c: Use string.h, not gdb_string.h. * objfiles.c: Use string.h, not gdb_string.h. * opencl-lang.c: Use string.h, not gdb_string.h. * osabi.c: Use string.h, not gdb_string.h. * osdata.c: Use string.h, not gdb_string.h. * p-exp.y: Use string.h, not gdb_string.h. * p-lang.c: Use string.h, not gdb_string.h. * p-typeprint.c: Use string.h, not gdb_string.h. * parse.c: Use string.h, not gdb_string.h. * posix-hdep.c: Use string.h, not gdb_string.h. * ppc-linux-nat.c: Use string.h, not gdb_string.h. * ppc-sysv-tdep.c: Use string.h, not gdb_string.h. * ppcfbsd-tdep.c: Use string.h, not gdb_string.h. * ppcnbsd-tdep.c: Use string.h, not gdb_string.h. * ppcobsd-tdep.c: Use string.h, not gdb_string.h. * printcmd.c: Use string.h, not gdb_string.h. * procfs.c: Use string.h, not gdb_string.h. * prologue-value.c: Use string.h, not gdb_string.h. * python/py-auto-load.c: Use string.h, not gdb_string.h. * python/py-gdb-readline.c: Use string.h, not gdb_string.h. * ravenscar-thread.c: Use string.h, not gdb_string.h. * regcache.c: Use string.h, not gdb_string.h. * registry.c: Use string.h, not gdb_string.h. * remote-fileio.c: Use string.h, not gdb_string.h. * remote-m32r-sdi.c: Use string.h, not gdb_string.h. * remote-mips.c: Use string.h, not gdb_string.h. * remote-sim.c: Use string.h, not gdb_string.h. * remote.c: Use string.h, not gdb_string.h. * reverse.c: Use string.h, not gdb_string.h. * rs6000-aix-tdep.c: Use string.h, not gdb_string.h. * ser-base.c: Use string.h, not gdb_string.h. * ser-go32.c: Use string.h, not gdb_string.h. * ser-mingw.c: Use string.h, not gdb_string.h. * ser-pipe.c: Use string.h, not gdb_string.h. * ser-tcp.c: Use string.h, not gdb_string.h. * ser-unix.c: Use string.h, not gdb_string.h. * serial.c: Use string.h, not gdb_string.h. * sh-tdep.c: Use string.h, not gdb_string.h. * sh64-tdep.c: Use string.h, not gdb_string.h. * shnbsd-tdep.c: Use string.h, not gdb_string.h. * skip.c: Use string.h, not gdb_string.h. * sol-thread.c: Use string.h, not gdb_string.h. * solib-dsbt.c: Use string.h, not gdb_string.h. * solib-frv.c: Use string.h, not gdb_string.h. * solib-osf.c: Use string.h, not gdb_string.h. * solib-spu.c: Use string.h, not gdb_string.h. * solib-target.c: Use string.h, not gdb_string.h. * solib.c: Use string.h, not gdb_string.h. * somread.c: Use string.h, not gdb_string.h. * source.c: Use string.h, not gdb_string.h. * sparc-nat.c: Use string.h, not gdb_string.h. * sparc-sol2-tdep.c: Use string.h, not gdb_string.h. * sparc-tdep.c: Use string.h, not gdb_string.h. * sparc64-tdep.c: Use string.h, not gdb_string.h. * sparc64fbsd-tdep.c: Use string.h, not gdb_string.h. * sparc64nbsd-tdep.c: Use string.h, not gdb_string.h. * sparcnbsd-tdep.c: Use string.h, not gdb_string.h. * spu-linux-nat.c: Use string.h, not gdb_string.h. * spu-multiarch.c: Use string.h, not gdb_string.h. * spu-tdep.c: Use string.h, not gdb_string.h. * stabsread.c: Use string.h, not gdb_string.h. * stack.c: Use string.h, not gdb_string.h. * std-regs.c: Use string.h, not gdb_string.h. * symfile.c: Use string.h, not gdb_string.h. * symmisc.c: Use string.h, not gdb_string.h. * symtab.c: Use string.h, not gdb_string.h. * target.c: Use string.h, not gdb_string.h. * thread.c: Use string.h, not gdb_string.h. * tilegx-linux-nat.c: Use string.h, not gdb_string.h. * tilegx-tdep.c: Use string.h, not gdb_string.h. * top.c: Use string.h, not gdb_string.h. * tracepoint.c: Use string.h, not gdb_string.h. * tui/tui-command.c: Use string.h, not gdb_string.h. * tui/tui-data.c: Use string.h, not gdb_string.h. * tui/tui-disasm.c: Use string.h, not gdb_string.h. * tui/tui-file.c: Use string.h, not gdb_string.h. * tui/tui-layout.c: Use string.h, not gdb_string.h. * tui/tui-out.c: Use string.h, not gdb_string.h. * tui/tui-regs.c: Use string.h, not gdb_string.h. * tui/tui-source.c: Use string.h, not gdb_string.h. * tui/tui-stack.c: Use string.h, not gdb_string.h. * tui/tui-win.c: Use string.h, not gdb_string.h. * tui/tui-windata.c: Use string.h, not gdb_string.h. * tui/tui-winsource.c: Use string.h, not gdb_string.h. * typeprint.c: Use string.h, not gdb_string.h. * ui-file.c: Use string.h, not gdb_string.h. * ui-out.c: Use string.h, not gdb_string.h. * user-regs.c: Use string.h, not gdb_string.h. * utils.c: Use string.h, not gdb_string.h. * v850-tdep.c: Use string.h, not gdb_string.h. * valarith.c: Use string.h, not gdb_string.h. * valops.c: Use string.h, not gdb_string.h. * valprint.c: Use string.h, not gdb_string.h. * value.c: Use string.h, not gdb_string.h. * varobj.c: Use string.h, not gdb_string.h. * vax-tdep.c: Use string.h, not gdb_string.h. * vaxnbsd-tdep.c: Use string.h, not gdb_string.h. * vaxobsd-tdep.c: Use string.h, not gdb_string.h. * windows-nat.c: Use string.h, not gdb_string.h. * xcoffread.c: Use string.h, not gdb_string.h. * xml-support.c: Use string.h, not gdb_string.h. * xstormy16-tdep.c: Use string.h, not gdb_string.h. * xtensa-linux-nat.c: Use string.h, not gdb_string.h.
2013-08-09This patch implements the new gdbarch method gdbarch_gdb_signal_to_target.Sergio Durigan Junior1-56/+185
It will be used when one wants to convert between the internal GDB signal representation (enum gdb_signal) and the target's representation. The idea of this patch came from a chat between Pedro and I on IRC, plus the discussion of my patches to add the new $_exitsignal convenience variable: <http://sourceware.org/ml/gdb-patches/2013-06/msg00452.html> <http://sourceware.org/ml/gdb-patches/2013-06/msg00352.html> What I did was to investigate, on the Linux kernel, which targets shared the signal numbers definition with the generic definition, present at <include/uapi/asm-generic/signal.h>. For the record, I used linux-3.10-rc7 as the main source of information, always looking at <arch/<ARCH_NAME>/include/uapi/asm/signal.h>. For SIGRTMAX (which defaults to _NSIG in most cases), I had to look at different signal-related files, but most of them (except MIPS) were defined to 64 anyway. Then, with all the differences in hand, I implemented the bits on each target. 2013-08-09 Sergio Durigan Junior <sergiodj@redhat.com> * linux-tdep.c: Define enum with generic signal numbers. (linux_gdb_signal_from_target): New function. (linux_gdb_signal_to_target): Likewise. (linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target methods to the functions above. * linux-tdep.h (linux_gdb_signal_from_target): New prototype. (linux_gdb_signal_to_target): Likewise. * alpha-linux-tdep.c: Define new enum with signals different from generic Linux kernel. (alpha_linux_gdb_signal_from_target): New function. (alpha_linux_gdb_signal_to_target): Likewise. (alpha_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target with the functions mentioned above. * avr-tdep.c: Define enum with differences between Linux kernel and AVR signals. (avr_linux_gdb_signal_from_target): New function. (avr_linux_gdb_signal_to_target): Likewise. (avr_gdbarch_init): Set gdbarch_gdb_signal_{to,from}_target to the functions mentioned above. * sparc-linux-tdep.c: Define enum with differences between SPARC and generic Linux kernel signal numbers. (sparc32_linux_gdb_signal_from_target): New function. (sparc32_linux_gdb_signal_to_target): Likewise. (sparc32_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target to the functions defined above. * xtensa-linux-tdep.c: Define enum with differences between Xtensa and Linux kernel generic signals. (xtensa_linux_gdb_signal_from_target): New function. (xtensa_linux_gdb_signal_to_target): Likewise. (xtensa_linux_init_abi): Set gdbarch_gdb_signal_to_target to the functions defined above. * mips-linux-tdep.c: Define enum with differences between signals in MIPS and Linux kernel generic ones. (mips_gdb_signal_to_target): New function. (mips_gdb_signal_from_target): Redefine to use new enum, handle only different signals from the Linux kernel generic. (mips_linux_init_abi): Set gdbarch_gdb_signal_{to,from}_target the functions defined above. * mips-linux-tdep.h (enum mips_signals): Remove.
2013-06-24 * objfiles.h (pc_in_section): New prototype.Maciej W. Rozycki1-9/+20
(in_plt_section): Remove name argument, replace prototype with static inline function. * mips-tdep.h: Include "objfiles.h". (in_mips_stubs_section): New function. * hppa-tdep.h (gdbarch_tdep): Remove name argument of in_solib_call_trampoline member. (hppa_in_solib_call_trampoline): Remove name argument. * objfiles.c (pc_in_section): New function. (in_plt_section): Remove function. * mips-linux-tdep.c: Include "objfiles.h". (mips_linux_in_dynsym_stub): Call in_mips_stubs_section. Remove name argument. Return 1 rather than the low 16-bit halfword of any instruction examined. (mips_linux_in_dynsym_resolve_code): Update mips_linux_in_dynsym_stub call accordingly. * mips-tdep.c (mips_stub_frame_sniffer): Use in_mips_stubs_section rather than an equivalent hand-coded sequence. * hppa-hpux-tdep.c (in_opd_section): Remove function. (hppa32_hpux_in_solib_call_trampoline): Remove name argument. (hppa64_hpux_in_solib_call_trampoline): Likewise. (hppa64_hpux_find_global_pointer): Use pc_in_section rather than in_opd_section. * hppa-tdep.c (hppa_stub_unwind_sniffer): Remove name argument on call to tdep->in_solib_call_trampoline. (hppa_in_solib_call_trampoline): Remove name argument, update according to in_plt_section change. (hppa_skip_trampoline_code): Update according to in_plt_section change. * aarch64-tdep.c (aarch64_stub_unwind_sniffer): Likewise. * arm-symbian-tdep.c (arm_symbian_skip_trampoline_code): Likewise. * arm-tdep.c (arm_stub_unwind_sniffer): Likewise. * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise. * hppabsd-tdep.c (hppabsd_find_global_pointer): Likewise. * nios2-tdep.c (nios2_stub_frame_sniffer): Likewise. * nto-tdep.c (nto_relocate_section_addresses): Likewise. * s390-tdep.c (s390_stub_frame_sniffer): Likewise. * sh-tdep.c (sh_stub_unwind_sniffer): Likewise. * solib-dsbt.c (dsbt_in_dynsym_resolve_code): Likewise. * solib-frv.c (frv_in_dynsym_resolve_code): Likewise. * solib-svr4.c (svr4_in_dynsym_resolve_code): Likewise. * solib-target.c (solib_target_in_dynsym_resolve_code): Likewise. * sparc-tdep.c (sparc_analyze_prologue): Likewise. * tic6x-tdep.c (tic6x_stub_unwind_sniffer): Likewise.
2013-05-30 * mips-linux-tdep.c: Adjust formatting throughout.Maciej W. Rozycki1-59/+56
2013-03-01Use gdb_byte for bytes from the program being debugged.Pedro Alves1-2/+2
gdb_byte should be used for bytes from the program being debugged. We have many places using char or unsigned char instead all over the existing ports, and more ends up added over time due to copy/paste as new code is based on old code. I've greped the tree for "char buf[", and fixed all I found. Tested by building with --enable-targets=all. 2013-03-01 Pedro Alves <palves@redhat.com> Use gdb_byte for bytes from the program being debugged. * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target): Change type of local 'buf' to gdb_byte. * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise. * bfin-tdep.c (bfin_push_dummy_call): Likewise. * cris-tdep.c (cris_sigcontext_addr) (cris_sigtramp_frame_unwind_cache): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp) (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Likewise. * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise. * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer) (hppa32_hpux_search_dummy_call_sequence) (hppa_hpux_supply_save_state): Likewise. * hppa-linux-tdep.c (insns_match_pattern) (hppa_linux_find_global_pointer): Likewise. * hppa-tdep.c (hppa_in_function_epilogue_p) (skip_prologue_hard_way, hppa_frame_cache): Likewise. * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise. * i386fbsd-tdep.c (i386fbsd_supply_uthread) (i386fbsd_collect_uthread): Likewise. * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise. * ia64-tdep.c (examine_prologue, ia64_frame_cache) (ia64_frame_prev_register, ia64_sigtramp_frame_cache) (ia64_sigtramp_frame_prev_register, ia64_access_reg) (ia64_access_rse_reg, ia64_libunwind_frame_this_id) (ia64_libunwind_frame_prev_register) (ia64_libunwind_sigtramp_frame_this_id) (ia64_find_global_pointer_from_dynamic_section) (find_extant_func_descr, find_func_descr, ia64_dummy_id) (ia64_unwind_pc): Likewise. * iq2000-tdep.c (iq2000_store_return_value): Likewise. * m68hc11-tdep.c (m68hc11_push_dummy_call) (m68hc11_extract_return_value): Likewise. * m68klinux-nat.c (fetch_register, store_register): Likewise. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write) (mep_get_insn, mep_push_dummy_call): Likewise. * mips-linux-tdep.c (mips_linux_get_longjmp_target) (mips_linux_in_dynsym_stub): Likewise. * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise. * ppc-linux-nat.c (fetch_register, store_register): Likewise. * regcache.c (dump_endian_bytes): Change type of parameter 'buf' to gdb_byte. * remote-mips.c (mips_set_register): Likewise. * remote-sim.c (gdbsim_fetch_register): Likewise. * score-tdep.c (score7_fetch_inst): Change type of parameter 'memblock' and local 'buf' to gdb_byte. (score7_malloc_and_get_memblock): Change return type to gdb_byte. Change type of local 'buf' to gdb_byte. Adjust. (score7_adjust_memblock_ptr): Change type of parameter 'memblock' to gdb_byte**. (score7_analyze_prologue): Change type of 'memblock' and 'memblock_ptr' locals to gdb_byte*. * sh64-tdep.c (sh64_extract_return_value) (sh64_store_return_value): Change type of local 'buf' to gdb_byte. * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr): * solib-pa64.c (pa64_solib_create_inferior_hook) (pa64_open_symbol_file_object): Remove local 'buf'. * solib-som.c (som_solib_create_inferior_hook, link_map_start) (som_open_symbol_file_object): Likewise. * solib-spu.c (spu_current_sos): Likewise. * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise. * spu-multiarch.c (parse_spufs_run, spu_fetch_registers) (spu_store_registers): Likewise. * target.c (debug_print_register): Likewise. * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise. * xstormy16-tdep.c (xstormy16_store_return_value) (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry) (xstormy16_find_jmp_table_entry): Likewise.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-11-09 * gdbarch.sh (target_gdbarch): Remove macro.Tom Tromey1-2/+2
(get_target_gdbarch): Rename to target_gdbarch. * gdbarch.c, gdbarch.h: Rebuild. * ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c, arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c, darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c, filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c, ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c, mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c, mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c, nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c, procfs.c, progspace.c, ravenscar-thread.c, record.c, remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c, rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c, solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c, solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c, solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c, spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c, target-descriptions.c, target.c, target.h, tracepoint.c, windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c, common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/python.c: Update.
2012-06-11*** empty log message ***Michael Eager1-0/+94
2012-05-22 * NEWS: Add MIPS/Linux DSP support.Maciej W. Rozycki1-7/+105
* mips-linux-tdep.c: Document post-2.6.12 o32 sigcontext layout. (SIGCONTEXT_DSPCTL): New macro. (SIGCONTEXT_HI1, SIGCONTEXT_LO1): Likewise. (SIGCONTEXT_HI2, SIGCONTEXT_LO2): Likewise. (SIGCONTEXT_HI3, SIGCONTEXT_LO3): Likewise. (N64_SIGCONTEXT_HI1, N64_SIGCONTEXT_HI2): Likewise. (N64_SIGCONTEXT_HI3): Likewise. (N64_SIGCONTEXT_LO1, N64_SIGCONTEXT_LO2): Likewise. (N64_SIGCONTEXT_LO3): Likewise. (N64_SIGCONTEXT_DSPCTL): Likewise. (N64_SIGCONTEXT_FPCSR): Clarify definition. (mips_linux_o32_sigframe_init): Handle DSP registers. (mips_linux_n32n64_sigframe_init): Likewise.
2012-05-182012-05-18 Sergio Durigan Junior <sergiodj@redhat.com>Sergio Durigan Junior1-3/+3
* ada-lang.c: * ada-tasks.c: * ada-varobj.c: * amd64-darwin-tdep.c: * arm-symbian-tdep.c: * arm-tdep.c: * avr-tdep.c: * ax-gdb.c: * bfin-linux-tdep.c: * breakpoint.c: * c-valprint.c: * cli/cli-cmds.c: * coffread.c: * cp-support.c: * cris-tdep.c: * dwarf2-frame-tailcall.c: * dwarf2-frame.c: * dwarf2expr.c: * dwarf2loc.c: * dwarf2read.c: * elfread.c: * eval.c: * expprint.c: * f-valprint.c: * frv-tdep.c: * h8300-tdep.c: * hppa-hpux-tdep.c: * hppa-tdep.c: * hppanbsd-tdep.c: * i386-nto-tdep.c: * i386-tdep.c: * i387-tdep.c: * ia64-tdep.c: * jit.c: * linespec.c: * linux-tdep.c: * lm32-tdep.c: * m2-valprint.c: * m32c-tdep.c: * m32r-rom.c: * m32r-tdep.c: * m68k-tdep.c: * m68klinux-tdep.c: * mi/mi-main.c: * microblaze-tdep.c: * mips-linux-tdep.c: * mips-tdep.c: * mn10300-tdep.c: * p-valprint.c: * parse.c: * ppc-linux-tdep.c: * ppc-sysv-tdep.c: * printcmd.c: * python/py-finishbreakpoint.c: * python/py-inferior.c: * python/py-infthread.c: * python/py-type.c: * python/python.c: * remote-fileio.c: * remote-m32r-sdi.c: * remote-mips.c: * reverse.c: * rl78-tdep.c: * rs6000-aix-tdep.c: * rs6000-tdep.c: * s390-tdep.c: * score-tdep.c: * sh64-tdep.c: * skip.c: * solib-darwin.c: * solib-dsbt.c: * solib-frv.c: * sparc-tdep.c: * spu-multiarch.c: * spu-tdep.c: * stack.c: * symfile.c: * symtab.c: * tic6x-tdep.c: * tracepoint.c: * v850-tdep.c: * valarith.c: * valprint.c: * value.c: * xcoffread.c: * xtensa-tdep.c: * ada-lang.c: * ada-tasks.c: * ada-varobj.c: * amd64-darwin-tdep.c: * arm-symbian-tdep.c: * arm-tdep.c: Delete unused variables.
2012-05-18 * mips-tdep.h (mips_write_pc): New prototype.Maciej W. Rozycki1-1/+4
* mips-tdep.c (mips_write_pc): Make external, add description. * mips-linux-tdep.c (mips_linux_write_pc): Use mips_write_pc, add description.
2012-03-02gdb/Jan Kratochvil1-1/+1
Fix -Wmissing-prototypes build. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Make it static. * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): New prototype. * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Likewise. * arm-symbian-tdep.c (arm_symbian_skip_trampoline_code): Make it static. (_initialize_arm_symbian_tdep): New prototype. * arm-wince-tdep.c (arm_wince_skip_main_prologue): Make it static. * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): New prototype. * i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Make it static. * lm32-tdep.c (_initialize_lm32_tdep): New prototype. * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): New prototype. * microblaze-tdep.c (microblaze_debug, microblaze_fetch_instruction) (microblaze_skip_prologue, microblaze_frame_cache): Make them static. * mips-linux-tdep.c (mips_linux_regset_from_core_section): Make it static. * moxie-tdep.c (moxie_process_record): Likewise. * remote-mips.c (mips_can_use_watchpoint, mips_insert_watchpoint) (mips_remove_watchpoint, mips_stopped_by_watchpoint): Make them static. * rl78-tdep.c (rl78_breakpoint_from_pc): Make it static. (_initialize_rl78_tdep): New prototype. * rx-tdep.c (rx_breakpoint_from_pc): Make it static. (_initialize_rx_tdep): New prototype. * solib-darwin.c (darwin_in_dynsym_resolve_code): Make it static. (_initialize_darwin_solib): New prototype. * solib-spu.c: Include solib-spu.h. (_initialize_spu_solib): New prototype. * spu-multiarch.c (_initialize_spu_multiarch): New prototype. * tic6x-tdep.c (tic6x_analyze_prologue, tic6x_skip_prologue) (tic6x_breakpoint_from_pc, tic6x_frame_unwind_cache) (tic6x_software_single_step): Make it static. (_initialize_tic6x_tdep): New prototype.
generated by cgit v1.1 at 2024-11-21 22:46:32 +0000