aboutsummaryrefslogtreecommitdiff
path: root/gdb/mem-break.c
AgeCommit message (Collapse)AuthorFilesLines
2014-04-23Stale breakpoint instructions, spurious SIGTRAPS.Pedro Alves1-0/+32
Without the code portion of the patch, we get these failures: FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue FAIL: gdb.base/break-unload-file.exp: always-inserted on: hbreak: continue FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here They all looks like random SIGTRAPs: continue Continuing. Program received signal SIGTRAP, Trace/breakpoint trap. 0x0000000000400541 in foo () at ../../../src/gdb/testsuite/gdb.base/break-unload-file.c:21 21 } (gdb) FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue (This is a regression caused by the remove-symbol-file command series.) break-unload-file.exp is about having breakpoints inserted, and then doing "file". I caught this while writing a test that does "file PROGRAM", while PROGRAM was already loaded, which internally does "file" first, because I wanted to force a breakpoint_re_set, but the test is more explicit in case GDB ever optimizes out that re-set. The problem is that unloading the file with "file" ends up in disable_breakpoints_in_freed_objfile, which marks all breakpoint locations of the objfile as both shlib_disabled, _and_ clears the inserted flag, without actually removing the breakpoints from the inferior. Now, usually, in all-stop, breakpoints will already be removed from the inferior before the user can issue the "file" command, but, with non-stop, or breakpoints always-inserted on mode, breakpoints stay inserted even while the user has the prompt. In the latter case, then, if we let the program continue, and it executes the address where we had previously set the breakpoint, it'll actually execute the breakpoint instruction that we left behind... Now, one issue is that the intent of disable_breakpoints_in_freed_objfile is really to handle the unloading of OBJF_USERLOADED objfiles. These are objfiles that were added with add-symbol-file and that are removed with remove-symbol-file. "add-symbol-file"'s docs in the manual clearly say these commands are used to let GDB know about dynamically loaded code: You would use this command when @var{filename} has been dynamically loaded (by some other means) into the program that is running. Similarly, the online help says: (gdb) help add-symbol-file Load symbols from FILE, assuming FILE has been dynamically loaded. So it makes sense to, like when shared libraries are unloaded through the generic solib machinery, mark the breakpoint locations as shlib_disabled. But, the "file" command is not about dynamically loaded code, it's about the main program. So the patch makes disable_breakpoints_in_freed_objfile skip all objfiles but OBJF_USERLOADED ones, thus skipping the main objfile. Then, the reason that disable_breakpoints_in_freed_objfile was clearing the inserted flag isn't clear, but likely to avoid breakpoint removal errors, assuming remove-symbol-file was called after the dynamic object was already unmapped from the inferior. In that case, it'd okay to simply clear the inserted flag, but not so if the user for example does remove-symbol-file to remove the library because he made a mistake in the library's address, and wants to re-do add-symbol-file with the correct address. To address all that, I propose an alternative implementation, that handles both cases. The patch includes changes to sym-file.exp to cover them. This implementation leaves the inserted flag alone, and handles breakpoint insertion/removal failure gracefully when the locations are in OBJF_USERLOADED objfiles, just like we handle insertion/removal failure gracefully for locations in shared libraries. To try to make sure we aren't patching back stale shadow memory contents into the inferior, in case the program mapped a different library at the same address where we had the breakpoint, without the user having had a chance of remove-symbol-file'ing before, this adds a new memory_validate_breakpoint function that checks if the breakpoint instruction is still in memory. ppc_linux_memory_remove_breakpoint does this unconditionally for all memory breakpoints, and questions whether memory_remove_breakpoint should be changed to do this for all breakpoints. Possibly yes, though I'm not certain, hence this baby-steps patch. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2014-04-23 Pedro Alves <palves@redhat.com> * breakpoint.c (insert_bp_location): Tolerate errors if the breakpoint is set in a user-loaded objfile. (remove_breakpoint_1): Likewise. Also tolerate errors if the location is marked shlib_disabled. If the breakpoint is set in a user-loaded objfile is a GDB-side memory breakpoint, validate it before uninsertion. (disable_breakpoints_in_freed_objfile): Skip non-OBJF_USERLOADED objfiles. Don't clear the location's inserted flag. * mem-break.c (memory_validate_breakpoint): New function. * objfiles.c (userloaded_objfile_contains_address_p): New function. * objfiles.h (userloaded_objfile_contains_address_p): Declare. * target.h (memory_validate_breakpoint): New declaration. gdb/testsuite/ 2014-04-23 Pedro Alves <palves@redhat.com> * gdb.base/break-unload-file.c: New file. * gdb.base/break-unload-file.exp: New file. * gdb.base/sym-file-lib.c (baz): New function. * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New field. (load): Store the segment's mapped size. (unload): New function. (unload_shlib): New function. * gdb.base/sym-file-loader.h (unload_shlib): New declaration. * gdb.base/sym-file-main.c (main): Unload, and reload the library, set a breakpoint at baz, and call it. * gdb.base/sym-file.exp: New tests for stale breakpoint instructions.
2014-01-16target, breakpoint: allow insert/remove breakpoint to be forwardedMarkus Metzger1-2/+2
2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * target.h (target_ops) <to_insert_breakpoint> <to_remove_breakpoint>: Add target_ops parameter. (forward_target_insert_breakpoint): New. (forward_target_remove_breakpoint): New. (memory_remove_breakpoint, memory_insert_breakpoint): Add target_ops parameter. * target.c (target_insert_breakpoint): Split into this and ... (forward_target_insert_breakpoint): ... this. (target_remove_breakpoint): Split into this and ... (forward_target_remove_breakpoint): ... this. (debug_to_insert_breakpoint): Add target_ops parameter. Call forward_target_insert_breakpoint. (debug_to_remove_breakpoint): Add target_ops parameter. Call forward_target_remove_breakpoint. (update_current_target): Do not inherit or default to_insert_breakpoint and to_remove_breakpoint. * corelow.c (ignore): Add target_ops parameter. * exec.c (ignore): Add target_ops parameter. * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint): Add target_ops parameter. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Add target_ops parameter. * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint): Add target_ops parameter. * record-full.c (record_full_beneath_to_insert_breakpoint) (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint) (tmp_to_remove_breakpoint, record_full_insert_breakpoint) (record_full_remove_breakpoint, record_full_core_insert_breakpoint) (record_full_core_remove_breakpoint): Add target_ops parameter. Update users. (record_full_beneath_to_insert_breakpoint_ops) (record_full_beneath_to_remove_breakpoint_ops) (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New. (record_full_open): Initialize tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops, record_full_beneath_to_insert_breakpoint_ops, and record_full_beneath_to_remove_breakpoint_ops. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Add target_ops parameter. * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint): Add target_ops parameter. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Add target_ops parameter.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-18remove gdb_string.hTom Tromey1-1/+1
This removes gdb_string.h. This patch is purely mechanical. I created it by running the two commands: git rm common/gdb_string.h perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl] 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_string.h: Remove. * aarch64-tdep.c: Use string.h, not gdb_string.h. * ada-exp.y: Use string.h, not gdb_string.h. * ada-lang.c: Use string.h, not gdb_string.h. * ada-lex.l: Use string.h, not gdb_string.h. * ada-typeprint.c: Use string.h, not gdb_string.h. * ada-valprint.c: Use string.h, not gdb_string.h. * aix-thread.c: Use string.h, not gdb_string.h. * alpha-linux-tdep.c: Use string.h, not gdb_string.h. * alpha-mdebug-tdep.c: Use string.h, not gdb_string.h. * alpha-nat.c: Use string.h, not gdb_string.h. * alpha-osf1-tdep.c: Use string.h, not gdb_string.h. * alpha-tdep.c: Use string.h, not gdb_string.h. * alphanbsd-tdep.c: Use string.h, not gdb_string.h. * amd64-dicos-tdep.c: Use string.h, not gdb_string.h. * amd64-linux-nat.c: Use string.h, not gdb_string.h. * amd64-linux-tdep.c: Use string.h, not gdb_string.h. * amd64-nat.c: Use string.h, not gdb_string.h. * amd64-sol2-tdep.c: Use string.h, not gdb_string.h. * amd64fbsd-tdep.c: Use string.h, not gdb_string.h. * amd64obsd-tdep.c: Use string.h, not gdb_string.h. * arch-utils.c: Use string.h, not gdb_string.h. * arm-linux-nat.c: Use string.h, not gdb_string.h. * arm-linux-tdep.c: Use string.h, not gdb_string.h. * arm-tdep.c: Use string.h, not gdb_string.h. * arm-wince-tdep.c: Use string.h, not gdb_string.h. * armbsd-tdep.c: Use string.h, not gdb_string.h. * armnbsd-nat.c: Use string.h, not gdb_string.h. * armnbsd-tdep.c: Use string.h, not gdb_string.h. * armobsd-tdep.c: Use string.h, not gdb_string.h. * avr-tdep.c: Use string.h, not gdb_string.h. * ax-gdb.c: Use string.h, not gdb_string.h. * ax-general.c: Use string.h, not gdb_string.h. * bcache.c: Use string.h, not gdb_string.h. * bfin-tdep.c: Use string.h, not gdb_string.h. * breakpoint.c: Use string.h, not gdb_string.h. * build-id.c: Use string.h, not gdb_string.h. * buildsym.c: Use string.h, not gdb_string.h. * c-exp.y: Use string.h, not gdb_string.h. * c-lang.c: Use string.h, not gdb_string.h. * c-typeprint.c: Use string.h, not gdb_string.h. * c-valprint.c: Use string.h, not gdb_string.h. * charset.c: Use string.h, not gdb_string.h. * cli-out.c: Use string.h, not gdb_string.h. * cli/cli-cmds.c: Use string.h, not gdb_string.h. * cli/cli-decode.c: Use string.h, not gdb_string.h. * cli/cli-dump.c: Use string.h, not gdb_string.h. * cli/cli-interp.c: Use string.h, not gdb_string.h. * cli/cli-logging.c: Use string.h, not gdb_string.h. * cli/cli-script.c: Use string.h, not gdb_string.h. * cli/cli-setshow.c: Use string.h, not gdb_string.h. * cli/cli-utils.c: Use string.h, not gdb_string.h. * coffread.c: Use string.h, not gdb_string.h. * common/common-utils.c: Use string.h, not gdb_string.h. * common/filestuff.c: Use string.h, not gdb_string.h. * common/linux-procfs.c: Use string.h, not gdb_string.h. * common/linux-ptrace.c: Use string.h, not gdb_string.h. * common/signals.c: Use string.h, not gdb_string.h. * common/vec.h: Use string.h, not gdb_string.h. * core-regset.c: Use string.h, not gdb_string.h. * corefile.c: Use string.h, not gdb_string.h. * corelow.c: Use string.h, not gdb_string.h. * cp-abi.c: Use string.h, not gdb_string.h. * cp-support.c: Use string.h, not gdb_string.h. * cp-valprint.c: Use string.h, not gdb_string.h. * cris-tdep.c: Use string.h, not gdb_string.h. * d-lang.c: Use string.h, not gdb_string.h. * dbxread.c: Use string.h, not gdb_string.h. * dcache.c: Use string.h, not gdb_string.h. * demangle.c: Use string.h, not gdb_string.h. * dicos-tdep.c: Use string.h, not gdb_string.h. * disasm.c: Use string.h, not gdb_string.h. * doublest.c: Use string.h, not gdb_string.h. * dsrec.c: Use string.h, not gdb_string.h. * dummy-frame.c: Use string.h, not gdb_string.h. * dwarf2-frame.c: Use string.h, not gdb_string.h. * dwarf2loc.c: Use string.h, not gdb_string.h. * dwarf2read.c: Use string.h, not gdb_string.h. * elfread.c: Use string.h, not gdb_string.h. * environ.c: Use string.h, not gdb_string.h. * eval.c: Use string.h, not gdb_string.h. * event-loop.c: Use string.h, not gdb_string.h. * exceptions.c: Use string.h, not gdb_string.h. * exec.c: Use string.h, not gdb_string.h. * expprint.c: Use string.h, not gdb_string.h. * f-exp.y: Use string.h, not gdb_string.h. * f-lang.c: Use string.h, not gdb_string.h. * f-typeprint.c: Use string.h, not gdb_string.h. * f-valprint.c: Use string.h, not gdb_string.h. * fbsd-nat.c: Use string.h, not gdb_string.h. * findcmd.c: Use string.h, not gdb_string.h. * findvar.c: Use string.h, not gdb_string.h. * fork-child.c: Use string.h, not gdb_string.h. * frame.c: Use string.h, not gdb_string.h. * frv-linux-tdep.c: Use string.h, not gdb_string.h. * frv-tdep.c: Use string.h, not gdb_string.h. * gdb.c: Use string.h, not gdb_string.h. * gdb_bfd.c: Use string.h, not gdb_string.h. * gdbarch.c: Use string.h, not gdb_string.h. * gdbtypes.c: Use string.h, not gdb_string.h. * gnu-nat.c: Use string.h, not gdb_string.h. * gnu-v2-abi.c: Use string.h, not gdb_string.h. * gnu-v3-abi.c: Use string.h, not gdb_string.h. * go-exp.y: Use string.h, not gdb_string.h. * go-lang.c: Use string.h, not gdb_string.h. * go32-nat.c: Use string.h, not gdb_string.h. * hppa-hpux-tdep.c: Use string.h, not gdb_string.h. * hppa-linux-nat.c: Use string.h, not gdb_string.h. * hppanbsd-tdep.c: Use string.h, not gdb_string.h. * hppaobsd-tdep.c: Use string.h, not gdb_string.h. * i386-cygwin-tdep.c: Use string.h, not gdb_string.h. * i386-dicos-tdep.c: Use string.h, not gdb_string.h. * i386-linux-nat.c: Use string.h, not gdb_string.h. * i386-linux-tdep.c: Use string.h, not gdb_string.h. * i386-nto-tdep.c: Use string.h, not gdb_string.h. * i386-sol2-tdep.c: Use string.h, not gdb_string.h. * i386-tdep.c: Use string.h, not gdb_string.h. * i386bsd-tdep.c: Use string.h, not gdb_string.h. * i386gnu-nat.c: Use string.h, not gdb_string.h. * i386nbsd-tdep.c: Use string.h, not gdb_string.h. * i386obsd-tdep.c: Use string.h, not gdb_string.h. * i387-tdep.c: Use string.h, not gdb_string.h. * ia64-libunwind-tdep.c: Use string.h, not gdb_string.h. * ia64-linux-nat.c: Use string.h, not gdb_string.h. * inf-child.c: Use string.h, not gdb_string.h. * inf-ptrace.c: Use string.h, not gdb_string.h. * inf-ttrace.c: Use string.h, not gdb_string.h. * infcall.c: Use string.h, not gdb_string.h. * infcmd.c: Use string.h, not gdb_string.h. * inflow.c: Use string.h, not gdb_string.h. * infrun.c: Use string.h, not gdb_string.h. * interps.c: Use string.h, not gdb_string.h. * iq2000-tdep.c: Use string.h, not gdb_string.h. * irix5-nat.c: Use string.h, not gdb_string.h. * jv-exp.y: Use string.h, not gdb_string.h. * jv-lang.c: Use string.h, not gdb_string.h. * jv-typeprint.c: Use string.h, not gdb_string.h. * jv-valprint.c: Use string.h, not gdb_string.h. * language.c: Use string.h, not gdb_string.h. * linux-fork.c: Use string.h, not gdb_string.h. * linux-nat.c: Use string.h, not gdb_string.h. * lm32-tdep.c: Use string.h, not gdb_string.h. * m2-exp.y: Use string.h, not gdb_string.h. * m2-typeprint.c: Use string.h, not gdb_string.h. * m32c-tdep.c: Use string.h, not gdb_string.h. * m32r-linux-nat.c: Use string.h, not gdb_string.h. * m32r-linux-tdep.c: Use string.h, not gdb_string.h. * m32r-rom.c: Use string.h, not gdb_string.h. * m32r-tdep.c: Use string.h, not gdb_string.h. * m68hc11-tdep.c: Use string.h, not gdb_string.h. * m68k-tdep.c: Use string.h, not gdb_string.h. * m68kbsd-tdep.c: Use string.h, not gdb_string.h. * m68klinux-nat.c: Use string.h, not gdb_string.h. * m68klinux-tdep.c: Use string.h, not gdb_string.h. * m88k-tdep.c: Use string.h, not gdb_string.h. * macrocmd.c: Use string.h, not gdb_string.h. * main.c: Use string.h, not gdb_string.h. * mdebugread.c: Use string.h, not gdb_string.h. * mem-break.c: Use string.h, not gdb_string.h. * memattr.c: Use string.h, not gdb_string.h. * memory-map.c: Use string.h, not gdb_string.h. * mep-tdep.c: Use string.h, not gdb_string.h. * mi/mi-cmd-break.c: Use string.h, not gdb_string.h. * mi/mi-cmd-disas.c: Use string.h, not gdb_string.h. * mi/mi-cmd-env.c: Use string.h, not gdb_string.h. * mi/mi-cmd-stack.c: Use string.h, not gdb_string.h. * mi/mi-cmd-var.c: Use string.h, not gdb_string.h. * mi/mi-cmds.c: Use string.h, not gdb_string.h. * mi/mi-console.c: Use string.h, not gdb_string.h. * mi/mi-getopt.c: Use string.h, not gdb_string.h. * mi/mi-interp.c: Use string.h, not gdb_string.h. * mi/mi-main.c: Use string.h, not gdb_string.h. * mi/mi-parse.c: Use string.h, not gdb_string.h. * microblaze-rom.c: Use string.h, not gdb_string.h. * microblaze-tdep.c: Use string.h, not gdb_string.h. * mingw-hdep.c: Use string.h, not gdb_string.h. * minidebug.c: Use string.h, not gdb_string.h. * minsyms.c: Use string.h, not gdb_string.h. * mips-irix-tdep.c: Use string.h, not gdb_string.h. * mips-linux-tdep.c: Use string.h, not gdb_string.h. * mips-tdep.c: Use string.h, not gdb_string.h. * mips64obsd-tdep.c: Use string.h, not gdb_string.h. * mipsnbsd-tdep.c: Use string.h, not gdb_string.h. * mipsread.c: Use string.h, not gdb_string.h. * mn10300-linux-tdep.c: Use string.h, not gdb_string.h. * mn10300-tdep.c: Use string.h, not gdb_string.h. * monitor.c: Use string.h, not gdb_string.h. * moxie-tdep.c: Use string.h, not gdb_string.h. * mt-tdep.c: Use string.h, not gdb_string.h. * nbsd-tdep.c: Use string.h, not gdb_string.h. * nios2-linux-tdep.c: Use string.h, not gdb_string.h. * nto-procfs.c: Use string.h, not gdb_string.h. * nto-tdep.c: Use string.h, not gdb_string.h. * objc-lang.c: Use string.h, not gdb_string.h. * objfiles.c: Use string.h, not gdb_string.h. * opencl-lang.c: Use string.h, not gdb_string.h. * osabi.c: Use string.h, not gdb_string.h. * osdata.c: Use string.h, not gdb_string.h. * p-exp.y: Use string.h, not gdb_string.h. * p-lang.c: Use string.h, not gdb_string.h. * p-typeprint.c: Use string.h, not gdb_string.h. * parse.c: Use string.h, not gdb_string.h. * posix-hdep.c: Use string.h, not gdb_string.h. * ppc-linux-nat.c: Use string.h, not gdb_string.h. * ppc-sysv-tdep.c: Use string.h, not gdb_string.h. * ppcfbsd-tdep.c: Use string.h, not gdb_string.h. * ppcnbsd-tdep.c: Use string.h, not gdb_string.h. * ppcobsd-tdep.c: Use string.h, not gdb_string.h. * printcmd.c: Use string.h, not gdb_string.h. * procfs.c: Use string.h, not gdb_string.h. * prologue-value.c: Use string.h, not gdb_string.h. * python/py-auto-load.c: Use string.h, not gdb_string.h. * python/py-gdb-readline.c: Use string.h, not gdb_string.h. * ravenscar-thread.c: Use string.h, not gdb_string.h. * regcache.c: Use string.h, not gdb_string.h. * registry.c: Use string.h, not gdb_string.h. * remote-fileio.c: Use string.h, not gdb_string.h. * remote-m32r-sdi.c: Use string.h, not gdb_string.h. * remote-mips.c: Use string.h, not gdb_string.h. * remote-sim.c: Use string.h, not gdb_string.h. * remote.c: Use string.h, not gdb_string.h. * reverse.c: Use string.h, not gdb_string.h. * rs6000-aix-tdep.c: Use string.h, not gdb_string.h. * ser-base.c: Use string.h, not gdb_string.h. * ser-go32.c: Use string.h, not gdb_string.h. * ser-mingw.c: Use string.h, not gdb_string.h. * ser-pipe.c: Use string.h, not gdb_string.h. * ser-tcp.c: Use string.h, not gdb_string.h. * ser-unix.c: Use string.h, not gdb_string.h. * serial.c: Use string.h, not gdb_string.h. * sh-tdep.c: Use string.h, not gdb_string.h. * sh64-tdep.c: Use string.h, not gdb_string.h. * shnbsd-tdep.c: Use string.h, not gdb_string.h. * skip.c: Use string.h, not gdb_string.h. * sol-thread.c: Use string.h, not gdb_string.h. * solib-dsbt.c: Use string.h, not gdb_string.h. * solib-frv.c: Use string.h, not gdb_string.h. * solib-osf.c: Use string.h, not gdb_string.h. * solib-spu.c: Use string.h, not gdb_string.h. * solib-target.c: Use string.h, not gdb_string.h. * solib.c: Use string.h, not gdb_string.h. * somread.c: Use string.h, not gdb_string.h. * source.c: Use string.h, not gdb_string.h. * sparc-nat.c: Use string.h, not gdb_string.h. * sparc-sol2-tdep.c: Use string.h, not gdb_string.h. * sparc-tdep.c: Use string.h, not gdb_string.h. * sparc64-tdep.c: Use string.h, not gdb_string.h. * sparc64fbsd-tdep.c: Use string.h, not gdb_string.h. * sparc64nbsd-tdep.c: Use string.h, not gdb_string.h. * sparcnbsd-tdep.c: Use string.h, not gdb_string.h. * spu-linux-nat.c: Use string.h, not gdb_string.h. * spu-multiarch.c: Use string.h, not gdb_string.h. * spu-tdep.c: Use string.h, not gdb_string.h. * stabsread.c: Use string.h, not gdb_string.h. * stack.c: Use string.h, not gdb_string.h. * std-regs.c: Use string.h, not gdb_string.h. * symfile.c: Use string.h, not gdb_string.h. * symmisc.c: Use string.h, not gdb_string.h. * symtab.c: Use string.h, not gdb_string.h. * target.c: Use string.h, not gdb_string.h. * thread.c: Use string.h, not gdb_string.h. * tilegx-linux-nat.c: Use string.h, not gdb_string.h. * tilegx-tdep.c: Use string.h, not gdb_string.h. * top.c: Use string.h, not gdb_string.h. * tracepoint.c: Use string.h, not gdb_string.h. * tui/tui-command.c: Use string.h, not gdb_string.h. * tui/tui-data.c: Use string.h, not gdb_string.h. * tui/tui-disasm.c: Use string.h, not gdb_string.h. * tui/tui-file.c: Use string.h, not gdb_string.h. * tui/tui-layout.c: Use string.h, not gdb_string.h. * tui/tui-out.c: Use string.h, not gdb_string.h. * tui/tui-regs.c: Use string.h, not gdb_string.h. * tui/tui-source.c: Use string.h, not gdb_string.h. * tui/tui-stack.c: Use string.h, not gdb_string.h. * tui/tui-win.c: Use string.h, not gdb_string.h. * tui/tui-windata.c: Use string.h, not gdb_string.h. * tui/tui-winsource.c: Use string.h, not gdb_string.h. * typeprint.c: Use string.h, not gdb_string.h. * ui-file.c: Use string.h, not gdb_string.h. * ui-out.c: Use string.h, not gdb_string.h. * user-regs.c: Use string.h, not gdb_string.h. * utils.c: Use string.h, not gdb_string.h. * v850-tdep.c: Use string.h, not gdb_string.h. * valarith.c: Use string.h, not gdb_string.h. * valops.c: Use string.h, not gdb_string.h. * valprint.c: Use string.h, not gdb_string.h. * value.c: Use string.h, not gdb_string.h. * varobj.c: Use string.h, not gdb_string.h. * vax-tdep.c: Use string.h, not gdb_string.h. * vaxnbsd-tdep.c: Use string.h, not gdb_string.h. * vaxobsd-tdep.c: Use string.h, not gdb_string.h. * windows-nat.c: Use string.h, not gdb_string.h. * xcoffread.c: Use string.h, not gdb_string.h. * xml-support.c: Use string.h, not gdb_string.h. * xstormy16-tdep.c: Use string.h, not gdb_string.h. * xtensa-linux-nat.c: Use string.h, not gdb_string.h.
2013-01-17 * mem-break.c: Remove obsolete comment.Tom Tromey1-4/+0
* bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-2/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-03-15Problem after hitting breakpoint on Windows (with GDBserver)Joel Brobecker1-6/+11
When debugging on Windows with GDBserver, the debugger starts failing after hitting a breakpoint. For instance: (gdb) b foo Breakpoint 1 at 0x40177e: file foo.adb, line 5. (gdb) cont Continuing. Breakpoint 1, foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP (gdb) n Program received signal SIGSEGV, Segmentation fault. 0x00401782 in foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP There are two issues: 1. While trying to re-insert a breakpoint that is still inserted in memory, insert_bp_location wipes out the breakpoint location's shadow_contents. As a consequence, we cannot restore the proper instruction when removing the breakpoint anymore. That's why the inferior's behavior changes when trying to resume after the breakpoint was hit. 2. mem-break.c:default_memory_insert_breakpoint passes a breakpoint location's shadow_contents as the buffer for a memory read. This reveals a limitation of the various memory-read target functions. This patch documents this limitation and adjust the two calls that seem to hit that limitation. gdb/ChangeLog: * breakpoint.c (breakpoint_xfer_memory): Add assertion. Update function description. (insert_bp_location): Do not wipe bl->target_info out. * mem-break.c: #include "gdb_string.h". (default_memory_insert_breakpoint): Do not call target_read_memory with a pointer to the breakpoint's shadow_contents buffer. Use a local buffer instead. * m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker1-2/+2
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-12-062011-12-06 Pedro Alves <pedro@codesourcery.com>Pedro Alves1-4/+4
gdb/ * breakpoint.c (breakpoint_restore_shadows): Rename to ... (breakpoint_xfer_memory): ... this. Change prototype. Handle memory writes too. * breakpoint.h (breakpoint_restore_shadows): Delete. (breakpoint_xfer_memory): Declare. * mem-break.c (default_memory_insert_breakpoint) (default_memory_remove_breakpoint): Use target_write_raw_memory. (memory_xfer_partial): Rename to ... (memory_xfer_partial_1): ... this. Don't mask out breakpoints here. (memory_xfer_partial): New. (target_write_raw_memory): New. * target.h (target_write_raw_memory): New. gdb/testsuite/ * gdb.base/break-always.exp: Test changing memory at addresses with breakpoints inserted.
2011-01-01run copyright.sh for 2011.Joel Brobecker1-1/+1
2010-05-062010-05-06 Michael Snyder <msnyder@vmware.com>Michael Snyder1-1/+0
* osabi.c (_initialize_gdb_osabi): Delete unused variable. * memattr.c (mem_delete): Delete unused variable. (invalidate_target_mem_regions): Delete unused variable. * mem-break.c (default_memory_insert_breakpoint): Delete unused variable. * target.c (target_get_osdata): Delete unused variable. * parse.c (length_of_subexp): Delete unused variable. (prefixify_subexp): Delete unused variable. (exp_iterate): Delete unused variable. * reverse.c (delete_bookmark_command): Delete unused variable.
2010-01-01Update copyright year in most headers.Joel Brobecker1-1/+1
Automatic update by copyright.sh.
2009-07-02 * breakpoint.h (struct breakpoint): New member GDBARCH.Ulrich Weigand1-4/+6
* breakpoint.c: Include "arch-utils.h". (set_raw_breakpoint_without_location): Add GDBARCH parameter. Use it to set breakpoint architecture. (set_raw_breakpoint): Add GDBARCH parameter. (create_internal_breakpoint): Likewise. (create_catchpoint): Likewise. (create_fork_vfork_event_catchpoint): Likewise. (create_breakpoint): Likewise. (create_breakpoints): Likewise. (break_command_really): Likewise. (create_ada_exception_breakpoint): Likewise. Update local callers to pass architecture: (create_internal_breakpoint): Update. (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_thread_event_breakpoint): Update. (create_solib_event_breakpoint): Update. (create_catchpoint): Update. (create_fork_vfork_event_catchpoint): Update. (set_momentary_breakpoint): Update. (clone_momentary_breakpoint): Update. (create_breakpoint): Update. (create_breakpoints): Update. (break_command_really): Update. (break_command_1): Update. (set_breakpoint): Update. (watch_command_1): Update. (catch_fork_command_1): Update. (catch_exec_commnd_1): Update. (handle_gnu_v3_exceptions): Update. (create_ada_exception_breakpoint): Update. (catch_ada_exception_command): Update. (catch_assert_command): Update. (trace_command): Update. * breakpoint.h (struct bp_location): New member GDBARCH. * breakpoint.c (get_sal_arch): New function. (set_raw_breakpoint): Set location architecture. (add_location_to_breakpoint): Likewise. (clone_momentary_breakpoint): Likewise. (watch_command_1): Likewise. (update_watchpoint): Likewise. (bp_loc_is_permanent): Use location architecture instead of current_gdbarch. (adjust_breakpoint_address): Add GDBARCH parameter; use it instead of current_gdbarch. Update callers of adjust_breakpoint_address to pass breakpoint location architecture: (set_raw_breakpoint): Update. (watch_command_1): Update. * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead of current_gdbarch. (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol. (encode_actions): Pass tracepoint architecture to add_local_symbols (encode_actions): Use tracepoint architecture instead of current_gdbarch. Pass it to add_local_symbols and collect_symbol. * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter of print_one callback with last_loc. * breakpoint.c (print_one_breakpoint_location): Replace last_addr parameter with last_loc. (print_one_breakpoint): Likewise. (do_captured_breakpoint_query): Update call. (breakpoint_1): Pass last_loc instead of last_addr to print_one_breakpoint. Pass last location architecture instead of current_gdbarch to set_next_address. Update all implementations of the print_one callback: * breakpoint.c (print_one_catch_fork): Update. (print_one_catch_vfork): Update. (print_one_catch_exec): Update. (print_one_exception_catchpoint): Update. * ada-lang.c (print_one_exception): Update. (print_one_catch_exception): Update. (print_one_catch_exception_unhandled): Update. (print_one_catch_assert): Update. * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS parameter. Use it instead of gdbarch_addr_bit (current_gdbarch). (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it to print_one_breakpoint_location. (breakpoint_address_bits): New function. (do_captured_breakpoint_query): Compute number of address bits to print and pass it to print_one_breakpoint. (breakpoint_1): Likewise. Use it instead of current_gdbarch. * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH. * breakpoint.c (create_thread_event_breakpoint): Likewise. Update callers to create_thread_event_breakpoint: * aix-thread.c (pd_enable): Update. * linux-thread-db.c (enable_thread_event): Update. * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH. * breakpoint.c (create_solib_event_breakpoint): Likewise. Update callers to create_solib_event_breakpoint: * solib-frv.c (enable_break, enable_break2): Update. * solib-pa64.c (pa64_solib_create_inferior_hook): Update. * solib-som.c (som_solib_create_inferior_hook): Update. * solib-darwin.c (darwin_solib_create_inferior_hook): Update. * solib-svr4.c (enable_break): Update. * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH. * breakpoint.c (insert_single_step_breakpoint): Likewise. Update callers to insert_single_step_breakpoint: * alpha-tdep.c (alpha_software_single_step): Update. * arm-linux-tdep.c (arm_linux_software_single_step): Update. * arm-tdep.c (arm_software_single_step): Update. * cris-tdep.c (cris_software_single_step): Update. * rs6000-aix-tdep.c (rs6000_software_single_step): Update. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update. * sparc-tdep.c (sparc_software_single_step): Update. * spu-tdep.c (spu_software_single_step): Update. * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter. Pass it to insert_single_step_breakpoint. (mips_software_single_step): Pass architecture to deal_with_atomic_sequence and insert_single_step_breakpoint. * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. Update callers to deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint: * breakpoint.c (single_step_gdbarch): New static variable. (insert_single_step_breakpoint): Pass GDBARCH parameter to deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch. (remove_single_step_breakpoints): Pass architecture stored in single_step_gdbarch to deprecated_remove_raw_breakpoint. * rs6000-nat.c (exec_one_dummy_insn): Update. * solib-irix.c (enable_break, disable_break): Update. * procfs.c (procfs_mourn_inferior): Update. (remove_dbx_link_breakpoint): Update. * breakpoint.h (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. * breakpoint.c (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. Update callers to set_breakpoint, set_momentary_breakpoint and set_momentary_breakpoint_at_pc: * breakpoint.c (set_momentary_breakpoint_at_pc): Update. (until_break_command): Update. * infcall.c (call_function_by_hand): Update. * infcmd.c (finish_backward, finish_forward): Update. * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH parameter. Pass it to set_momentary_breakpoint. (insert_longjmp_resume_breakpoint): Add GDBARCH parameter. Pass it to set_momentary_breakpoint_at_pc. (handle_inferior_event): Update. (insert_step_resume_breakpoint_at_frame): Update. (insert_step_resume_breakpoint_at_caller): Update.. * mi/mi-cmd-break.c: Include "arch-utils.h". (mi_cmd_break_insert): Update. * target.h (struct target_ops): Add GDBARCH parameter to to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint members. (target_insert_breakpoint, target_remove_breakpoint, target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH parameter. * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint, debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (update_current_target): Update function signature. * breakpoint.c (insert_bp_location, remove_breakpoint, deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint): Pass architecture to target_ routines. Update all implementations of the target breakpoint routines to take GDBARCH parameter and use it instead of GDBARCH as appropriate: * corelow.c (ignore): Update. * exec.c (ignore): Update. * mem-break.c (memory_insert_breakpoint): Update. (memory_remove_breakpoint): Update. * monitor.c (monitor_insert_breakpoint): Update. (monitor_remove_breakpoint): Update. * record.c (record_insert_breakpoint): Update. (record_beneath_to_insert_breakpoint): Update. (record_remove_breakpoint): Update. (record_beneath_to_remove_breakpoint): Update. * remote.c (remote_insert_breakpoint): Update. (remote_remove_breakpoint): Update. (remote_insert_hw_breakpoint): Update. (remote_remove_hw_breakpoint): Update. * remote-m32r-sdi.c (m32r_insert_breakpoint): Update. (m32r_remove_breakpoint): Update. * remote-mips.c (mips_insert_breakpoint): Update. (mips_remove_breakpoint): Update. * i386-nat.c (i386_insert_hw_breakpoint): Update. (i386_remove_hw_breakpoint): Update. * nto-procfs.c (procfs_insert_breakpoint): Update. (procfs_remove_breakpoint): Update. (procfs_insert_hw_breakpoint): Update. (procfs_remove_hw_breakpoint): Update. doc/ChangeLog: * gdbint.texi (Examples of Use of @code{ui_out} functions): Update example code extrated from breakpoint.c.
2009-01-03 Updated copyright notices for most files.Joel Brobecker1-1/+1
2008-02-20 * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): AddMarkus Deuling1-3/+5
gdbarch as parameter. * gdbarch.{c,h}: Regenerate. * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as parameter. * mem-break.c (default_memory_insert_breakpoint) (default_memory_remove_breakpoint): Likewise. * target.h (default_memory_remove_breakpoint) (default_memory_insert_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as parameter. Replace current_gdbarch by gdbarch. * m32r-tdep.c (m32r_memory_insert_breakpoint) (m32r_memory_remove_breakpoint): Likewise.
2008-01-01 Updated copyright notices for most files.Daniel Jacobowitz1-1/+1
2007-08-23 Switch the license of all .c files to GPLv3.Joel Brobecker1-4/+2
Switch the license of all .h files to GPLv3. Switch the license of all .cc files to GPLv3.
2007-06-132007-06-13 Markus Deuling <deuling@de.ibm.com>Ulrich Weigand1-1/+2
* gdbarch.sh (BREAKPOINT_FROM_PC): Replace by gdbarch_breakpoint_from_pc. * s390-tdep.c (s390_gdbarch_init): Likewise (comment). * remote.c (remote_insert_breakpoint) (remote_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * mips-tdep.c (mips_breakpoint_from_pc): Likewise (comment). * breakpoint.h (bp_target_info): Likewise (comment). * breakpoint.c (read_memory_nobpt): Likewise. * mem-break.c (default_memory_insert_breakpoint): Likewise. (symtab.h, breakpoint.h): Remove include. Remove unnecessary comment. * gdbarch.c, gdbarch.h: Regenerate.
2007-06-092007-06-09 Markus Deuling <deuling@de.ibm.com>Ulrich Weigand1-2/+2
* gdbarch.sh (MEMORY_INSERT_BREAKPOINT): Replace by gdbarch_memory_insert_breakpoint. * mem-break.c (memory_insert_breakpoint): Likewise. * gdbarch.sh (MEMORY_REMOVE_BREAKPOINT): Replace by gdbarch_memory_remove_breakpoint. * mem-break.c (memory_remove_breakpoint): Likewise. * gdbarch.c, gdbarch.h: Regenerate.
2007-01-09Copyright updates for 2007.Daniel Jacobowitz1-2/+2
2006-04-18gdb/Daniel Jacobowitz1-25/+22
* breakpoint.c (deprecated_read_memory_nobpt): Update to use shadow_len. (insert_bp_location, reattach_breakpoints, remove_breakpoint) (delete_breakpoint): Update calls to changed methods. (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) (single_step_breakpoints, insert_single_step_breakpoint) (remove_single_step_breakpoints): New. * breakpoint.h (struct bp_target_info): New. (struct bp_location): Replace shadow_contents with target_info and overlay_target_info. (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) (insert_single_step_breakpoint, remove_single_step_breakpoints): New prototypes. * gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h. (memory_insert_breakpoint, memory_remove_breakpoint): Update second argument. * mem-break.c (default_memory_insert_breakpoint): Update. Set placed_address, placed_size, and shadow_len. (default_memory_remove_breakpoint): Update. Don't use BREAKPOINT_FROM_PC. (memory_insert_breakpoint, memory_remove_breakpoint): Update. * target.c (update_current_target): Update prototypes for changed functions. (debug_to_insert_breakpoint, debug_to_remove_breakpoint) (debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Update. * target.h: Forward declare struct bp_target_info. (struct target_ops): Use a bp_target_info argument for to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint. (target_insert_breakpoint, target_remove_breakpoint) (target_insert_hw_breakpoint, target_remove_hw_breakpoint) (memory_insert_breakpoint, memory_remove_breakpoint) (default_memory_insert_breakpoint, default_memory_remove_breakpoint): Update. * config/i386/nm-i386.h: Forward declare struct bp_target_info. (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * alpha-tdep.c (alpha_software_single_step): Use insert_single_step_breakpoint and remove_single_step_breakpoints. Remove unused statics. * arm-tdep.c (arm_software_single_step): Likewise. Add a note. * cris-tdep.c (cris_software_single_step): Likewise. * mips-tdep.c (mips_software_single_step): Likewise. * rs6000-tdep.c (rs6000_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * wince.c (struct thread_info_struct): Remove step_prev. (undoSStep): Use remove_single_step_breakpoints. (wince_software_single_step): Use insert_single_step_breakpoint. * corelow.c (ignore): Remove unneeded prototype. Update arguments. * exec.c (ignore): Likewise. * sol-thread.c (ignore): Likewise. * procfs.c (dbx_link_shadow_contents): Delete. (dbx_link_bpt): New. (procfs_mourn_inferior): Remove it if necessary. (remove_dbx_link_breakpoint): Use it. (insert_dbx_link_bpt_in_file): Set it. (procfs_init_inferior): Don't update dbx_link_bpt_addr. * rs6000-nat.c (exec_one_dummy_insn): Use deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint. * solib-irix.c (shadow_contents, breakpoint_addr): Delete. (base_breakpoint): New. (disable_break): Use it. (enable_break): Set it. * i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint) (ia64_memory_remove_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint) (m32r_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Likewise. Remove unnecessary prototypes. Use placed_address and placed_size. Removed useless read from memory. * nto-procfs.c (procfs_insert_breakpoint) (procfs_remove_breakpoint, procfs_insert_hw_breakpoint) (procfs_remove_hw_breakpoint): Update. * ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. * ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise. * remote-e7000.c (e7000_insert_breakpoint) (e7000_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint) (mips_remove_breakpoint): Likewise. * remote-rdp.c (remote_rdp_insert_breakpoint) (remote_rdp_remove_breakpoint): Likewise. (rdp_step): Use deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint. * remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint): Update. * remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint): Delete. (init_gdbsim_ops): Use memory_insert_breakpoint and memory_remove_breakpoint. * remote-st.c (st2000_insert_breakpoint) (st2000_remove_breakpoint): Update. Remove unused BREAKPOINT_FROM_PC. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Update. Use placed_address and placed_size. (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise. gdb/doc/ * gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert and remove breakpoint prototypes. (Watchpoints): Move description of target_insert_hw_breakpoint and target_remove_hw_breakpoint ... (Breakpoints): ... to here. Document target_insert_breakpoint and target_remove_breakpoint.
2005-12-17 * breakpoint.c:Eli Zaretskii1-3/+3
* arm-tdep.c: * ia64-tdep.c: * i386-tdep.c: * hpread.c: * hppa-tdep.c: * hppa-hpux-tdep.c: * gnu-nat.c: * gdbtypes.c: * gdbarch.h: * gdbarch.c: * eval.c: * dwarf2read.c: * dbxread.c: * copying: * symfile.c: * stabsread.c: * sh64-tdep.c: * sh-tdep.c: * s390-tdep.c: * rs6000-tdep.c: * remote.c: * remote-mips.c: * mips-tdep.c: * mdebugread.c: * linux-nat.c: * infrun.c: * xcoffread.c: * win32-nat.c: * valops.c: * utils.c: * tracepoint.c: * target.c: * symtab.c: * c-exp.y: * ada-valprint.c: * ada-typeprint.c: * ada-lex.l: * ada-lang.h: * ada-lang.c: * ada-exp.y: * alphafbsd-tdep.c: * alphabsd-tdep.h: * alphabsd-tdep.c: * alphabsd-nat.c: * alpha-tdep.h: * alpha-tdep.c: * alpha-osf1-tdep.c: * alpha-nat.c: * alpha-mdebug-tdep.c: * alpha-linux-tdep.c: * alpha-linux-nat.c: * aix-thread.c: * abug-rom.c: * arch-utils.c: * annotate.h: * annotate.c: * amd64obsd-tdep.c: * amd64obsd-nat.c: * amd64nbsd-tdep.c: * amd64nbsd-nat.c: * amd64fbsd-tdep.c: * amd64fbsd-nat.c: * amd64bsd-nat.c: * amd64-tdep.h: * amd64-tdep.c: * amd64-sol2-tdep.c: * amd64-nat.h: * amd64-nat.c: * amd64-linux-tdep.c: * amd64-linux-nat.c: * alphanbsd-tdep.c: * block.h: * block.c: * bfd-target.h: * bfd-target.c: * bcache.h: * bcache.c: * ax.h: * ax-general.c: * ax-gdb.h: * ax-gdb.c: * avr-tdep.c: * auxv.h: * auxv.c: * armnbsd-tdep.c: * armnbsd-nat.c: * arm-tdep.h: * arm-linux-nat.c: * arch-utils.h: * charset.c: * call-cmds.h: * c-valprint.c: * c-typeprint.c: * c-lang.h: * c-lang.c: * buildsym.h: * buildsym.c: * bsd-uthread.h: * bsd-uthread.c: * bsd-kvm.h: * bsd-kvm.c: * breakpoint.h: * core-regset.c: * core-aout.c: * completer.h: * completer.c: * complaints.h: * complaints.c: * command.h: * coffread.c: * coff-solib.h: * coff-solib.c: * coff-pe-read.h: * coff-pe-read.c: * cli-out.h: * cli-out.c: * charset.h: * dink32-rom.c: * dictionary.h: * dictionary.c: * demangle.c: * defs.h: * dcache.h: * dcache.c: * d10v-tdep.c: * cpu32bug-rom.c: * cp-valprint.c: * cp-support.h: * cp-support.c: * cp-namespace.c: * cp-abi.h: * cp-abi.c: * corelow.c: * corefile.c: * environ.c: * elfread.c: * dwarfread.c: * dwarf2loc.c: * dwarf2expr.h: * dwarf2expr.c: * dwarf2-frame.h: * dwarf2-frame.c: * dve3900-rom.c: * dummy-frame.h: * dummy-frame.c: * dsrec.c: * doublest.h: * doublest.c: * disasm.h: * disasm.c: * fork-child.c: * findvar.c: * fbsd-nat.h: * fbsd-nat.c: * f-valprint.c: * f-typeprint.c: * f-lang.h: * f-lang.c: * expression.h: * expprint.c: * exec.h: * exec.c: * exceptions.h: * exceptions.c: * event-top.h: * event-top.c: * event-loop.h: * event-loop.c: * gdb.c: * gdb-stabs.h: * gdb-events.h: * gdb-events.c: * gcore.c: * frv-tdep.h: * frv-tdep.c: * frv-linux-tdep.c: * frame.h: * frame.c: * frame-unwind.h: * frame-unwind.c: * frame-base.h: * frame-base.c: * gdb_vfork.h: * gdb_thread_db.h: * gdb_string.h: * gdb_stat.h: * gdb_regex.h: * gdb_ptrace.h: * gdb_proc_service.h: * gdb_obstack.h: * gdb_locale.h: * gdb_dirent.h: * gdb_curses.h: * gdb_assert.h: * gdbarch.sh: * gdb.h: * hpux-thread.c: * hppabsd-nat.c: * hppa-tdep.h: * hpacc-abi.c: * h8300-tdep.c: * gregset.h: * go32-nat.c: * gnu-v3-abi.c: * gnu-v2-abi.h: * gnu-v2-abi.c: * gnu-nat.h: * glibc-tdep.c: * gdbtypes.h: * gdbcore.h: * gdbcmd.h: * i386nbsd-tdep.c: * i386nbsd-nat.c: * i386gnu-tdep.c: * i386gnu-nat.c: * i386fbsd-tdep.c: * i386fbsd-nat.c: * i386bsd-tdep.c: * i386bsd-nat.h: * i386bsd-nat.c: * i386-tdep.h: * i386-sol2-nat.c: * i386-nto-tdep.c: * i386-nat.c: * i386-linux-tdep.h: * i386-linux-tdep.c: * i386-linux-nat.c: * i386-cygwin-tdep.c: * inf-ttrace.c: * inf-ptrace.h: * inf-ptrace.c: * inf-loop.h: * inf-loop.c: * inf-child.h: * inf-child.c: * ia64-tdep.h: * ia64-linux-nat.c: * i387-tdep.h: * i387-tdep.c: * i386v4-nat.c: * i386v-nat.c: * i386obsd-tdep.c: * i386obsd-nat.c: * kod.c: * jv-valprint.c: * jv-typeprint.c: * jv-lang.h: * jv-lang.c: * irix5-nat.c: * iq2000-tdep.c: * interps.h: * interps.c: * inftarg.c: * inflow.h: * inflow.c: * inferior.h: * infcmd.c: * infcall.h: * infcall.c: * inf-ttrace.h: * m32r-tdep.h: * m32r-tdep.c: * m32r-rom.c: * m32r-linux-tdep.c: * m32r-linux-nat.c: * m2-valprint.c: * m2-typeprint.c: * m2-lang.h: * m2-lang.c: * lynx-nat.c: * linux-thread-db.c: * linux-nat.h: * linespec.c: * libunwind-frame.h: * libunwind-frame.c: * language.h: * language.c: * macroexp.c: * macrocmd.c: * m88kbsd-nat.c: * m88k-tdep.h: * m88k-tdep.c: * m68klinux-tdep.c: * m68klinux-nat.c: * m68kbsd-tdep.c: * m68kbsd-nat.c: * m68k-tdep.h: * m68k-tdep.c: * mips-linux-nat.c: * mips-irix-tdep.c: * minsyms.c: * memattr.h: * memattr.c: * mem-break.c: * mdebugread.h: * main.h: * main.c: * macrotab.h: * macrotab.c: * macroscope.h: * macroscope.c: * macroexp.h: * nbsd-tdep.c: * mt-tdep.c: * monitor.h: * monitor.c: * mn10300-tdep.h: * mn10300-tdep.c: * mn10300-linux-tdep.c: * mipsv4-nat.c: * mipsread.c: * mipsnbsd-tdep.h: * mipsnbsd-tdep.c: * mipsnbsd-nat.c: * mips64obsd-tdep.c: * mips64obsd-nat.c: * mips-tdep.h: * mips-mdebug-tdep.c: * mips-linux-tdep.c: * osabi.h: * osabi.c: * ocd.h: * ocd.c: * observer.c: * objfiles.h: * objfiles.c: * objc-lang.h: * objc-lang.c: * objc-exp.y: * nto-tdep.h: * nto-tdep.c: * nto-procfs.c: * nlmread.c: * nbsd-tdep.h: * ppcobsd-tdep.c: * ppcobsd-nat.c: * ppcnbsd-tdep.h: * ppcnbsd-tdep.c: * ppcnbsd-nat.c: * ppcbug-rom.c: * ppc-tdep.h: * ppc-sysv-tdep.c: * ppc-linux-tdep.c: * ppc-linux-nat.c: * ppc-bdm.c: * parser-defs.h: * parse.c: * p-valprint.c: * p-typeprint.c: * p-lang.h: * p-lang.c: * remote-fileio.h: * remote-fileio.c: * remote-est.c: * remote-e7000.c: * regset.h: * regset.c: * reggroups.h: * reggroups.c: * regcache.h: * regcache.c: * proc-why.c: * proc-service.c: * proc-events.c: * printcmd.c: * ppcobsd-tdep.h: * sentinel-frame.h: * sentinel-frame.c: * scm-valprint.c: * scm-tags.h: * scm-lang.h: * scm-lang.c: * scm-exp.c: * s390-tdep.h: * rom68k-rom.c: * remote.h: * remote-utils.c: * remote-st.c: * remote-sim.c: * remote-sds.c: * remote-rdp.c: * remote-rdi.c: * remote-hms.c: * sim-regno.h: * shnbsd-tdep.h: * shnbsd-tdep.c: * shnbsd-nat.c: * sh-tdep.h: * serial.h: * serial.c: * ser-unix.h: * ser-unix.c: * ser-tcp.c: * ser-pipe.c: * ser-go32.c: * ser-e7kpc.c: * ser-base.h: * ser-base.c: * solib.c: * solib-svr4.h: * solib-svr4.c: * solib-sunos.c: * solib-som.h: * solib-som.c: * solib-pa64.h: * solib-pa64.c: * solib-osf.c: * solib-null.c: * solib-legacy.c: * solib-irix.c: * solib-frv.c: * solib-aix5.c: * sol-thread.c: * sparc64-linux-tdep.c: * sparc64-linux-nat.c: * sparc-tdep.h: * sparc-tdep.c: * sparc-sol2-tdep.c: * sparc-sol2-nat.c: * sparc-nat.h: * sparc-nat.c: * sparc-linux-tdep.c: * sparc-linux-nat.c: * source.h: * source.c: * somread.c: * solist.h: * solib.h: * std-regs.c: * stack.h: * stack.c: * stabsread.h: * sparcobsd-tdep.c: * sparcnbsd-tdep.c: * sparcnbsd-nat.c: * sparc64obsd-tdep.c: * sparc64nbsd-tdep.c: * sparc64nbsd-nat.c: * sparc64fbsd-tdep.c: * sparc64fbsd-nat.c: * sparc64-tdep.h: * sparc64-tdep.c: * sparc64-sol2-tdep.c: * sparc64-nat.c: * ui-file.c: * typeprint.h: * typeprint.c: * tramp-frame.h: * tramp-frame.c: * trad-frame.h: * trad-frame.c: * tracepoint.h: * top.c: * tobs.inc: * thread.c: * terminal.h: * target.h: * symfile.h: * stop-gdb.c: * vaxbsd-nat.c: * vax-tdep.h: * vax-tdep.c: * vax-nat.c: * varobj.h: * varobj.c: * value.h: * value.c: * valprint.h: * valprint.c: * v850-tdep.c: * uw-thread.c: * user-regs.c: * ui-out.h: * ui-out.c: * ui-file.h: * xcoffsolib.h: * xcoffsolib.c: * wrapper.c: * wince.c: * wince-stub.h: * wince-stub.c: * vaxobsd-tdep.c: * vaxnbsd-tdep.c: * gdb_gcore.sh: * copying.c: * configure.ac: * aclocal.m4: * acinclude.m4: * reply_mig_hack.awk: * observer.sh: * gdb_mbuild.sh: * arm-linux-tdep.c: * blockframe.c: * dbug-rom.c: * environ.h: * dwarf2loc.h: * gdb-events.sh: * glibc-tdep.h: * gdb_wait.h: * gdbthread.h: * i386-sol2-tdep.c: * hppabsd-tdep.c: * hppa-linux-nat.c: * hppa-hpux-nat.c: * ia64-linux-tdep.c: * infptrace.c: * linespec.h: * maint.c: * mips-mdebug-tdep.h: * remote-m32r-sdi.c: * s390-nat.c: * rs6000-nat.c: * remote-utils.h: * sh3-rom.c: * sh-linux-tdep.c: * top.h: * symtab.h: * symmisc.c: * symfile-mem.c: * srec.h: * user-regs.h: * version.h: * valarith.c: * xstormy16-tdep.c: * wrapper.h: * Makefile.in: * f-exp.y: * cris-tdep.c: * cp-name-parser.y: * procfs.c: * proc-utils.h: * proc-flags.c: * proc-api.c: * p-exp.y: * m68hc11-tdep.c: * m2-exp.y: * kod.h: * kod-cisco.c: * jv-exp.y: * hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF address.
2005-05-162005-05-16 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-1/+1
* target.h (target_read_partial, target_write_partial) (do_xfer_memory, xfer_memory, target_read, target_write) (get_target_memory): For buffers, change "void*" to gdb_byte. (struct target_ops): Ditto for to_xfer_partial and deprecated_xfer_memory. * dcache.h (dcache_xfer_memory): Ditto. * target.c (default_xfer_partial, target_read_partial) (target_write_partial, target_read, target_write) (do_xfer_memory, update_current_target, get_target_memory): Update. (target_read_string): Change buf to a gdb_byte. * dcache.c (dcache_xfer_memory): Update. * exec.c (xfer_memory): Make buffer type to gdb_byte. * mem-break.c (default_memory_insert_breakpoint): Remove cast. * disasm.c (dis_asm_read_memory): Remove cast, use gdb_byte.
2005-05-012005-05-01 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-5/+5
* gdbarch.sh (deprecated_extract_return_value) (breakpoint_from_pc, deprecated_store_return_value) (memory_insert_breakpoint, memory_remove_breakpoint): Change type of buffer to a bfd_byte pointer. * gdbarch.h, gdbarch.c: Re-generate. * mem-break.c (memory_insert_breakpoint) (memory_remove_breakpoint, default_memory_insert_breakpoint) (default_memory_remove_breakpoint): Update. * target.h (memory_insert_breakpoint) (memory_remove_breakpoint, default_memory_insert_breakpoint) (default_memory_remove_breakpoint): Update declarations. (struct target_ops): Update to_insert_breakpoint and to_remove_breakpoint. * target.c (debug_to_remove_breakpoint) (debug_to_insert_breakpoint): Update. * remote-m32r-sdi.c (m32r_remove_breakpoint) (m32r_insert_breakpoint): Update. * m32r-tdep.c (m32r_memory_insert_breakpoint) (m32r_memory_remove_breakpoint): Update. * remote-e7000.c (e7000_insert_breakpoint) (e7000_remove_breakpoint): Update. * remote-rdi.c (arm_rdi_insert_breakpoint) (arm_rdi_remove_breakpoint): Update. * remote-sim.c (gdbsim_insert_breakpoint) (gdbsim_remove_breakpoint): Update. * exec.c (ignore): Update. * rs6000-tdep.c (rs6000_extract_return_value): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint) (ia64_memory_remove_breakpoint): Update. * remote-rdp.c (remote_rdp_insert_breakpoint) (remote_rdp_remove_breakpoint): Update.
2005-02-112005-02-10 Andrew Cagney <cagney@gnu.org>Andrew Cagney1-2/+2
Mark up all error and warning messages. * ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update. * bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update. * core-aout.c, core-regset.c, corefile.c, corelow.c: Update. * cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update. * dbxread.c, demangle.c, doublest.c, dsrec.c: Update. * dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update. * event-top.c, exec.c, expprint.c, f-lang.c: Update. * f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update. * frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update. * gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update. * hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update. * hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update. * hpread.c, hpux-thread.c, i386-linux-nat.c: Update. * i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update. * i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update. * ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update. * infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update. * kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update. * linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update. * m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update. * m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update. * maint.c, mdebugread.c, mem-break.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update. * nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update. * observer.c, ocd.c, p-lang.c, p-typeprint.c: Update. * p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update. * ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update. * remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update. * remote-rdp.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote-utils.h, remote.c: Update. * rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update. * ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update. * sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update. * solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update. * solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update. * somread.c, somsolib.c, source.c, stabsread.c: Update. * stack.c, std-regs.c, symfile-mem.c, symfile.c: Update. * symmisc.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update. * uw-thread.c, valarith.c, valops.c, valprint.c: Update. * value.c, varobj.c, version.in, win32-nat.c, wince.c: Update. * xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update. * cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update. * cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update. * mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update. * mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update. * mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update. * tui/tui-win.c: Update.
2003-05-152003-05-15 Andrew Cagney <cagney@redhat.com>Andrew Cagney1-45/+2
* arch-utils.h (legacy_breakpoint_from_pc): Delete declaration. * target.h (memory_breakpoint_from_pc): Delete declaration. * mem-break.c (memory_breakpoint_from_pc): Delete function. * arch-utils.c (legacy_breakpoint_from_pc): Delete function. * monitor.c (monitor_insert_breakpoint): Use gdbarch_breakpoint_from_pc instead of memory_breakpoint_from_pc. * gdbarch.sh (BREAKPOINT_FROM_PC): Do not provide a default. * gdbarch.h, gdbarch.c: Re-generate. * sparc-tdep.c (sparc_breakpoint_from_pc): New function. (sparc_gdbarch_init): Set breakpoint_from_pc to sparc_breakpoint_from_pc. * config/sparc/tm-sparc.h (BREAKPOINT): Delete macro. (BREAKPOINT_FROM_PC): Define. (sparc_breakpoint_from_pc): Declare. * hppa-tdep.c (hppa_breakpoint_from_pc): New function. * config/pa/tm-hppa.h (hppa_breakpoint_from_pc): Declare. (BREAKPOINT_FROM_PC): Define. (BREAKPOINT): Delete macro. * target.h: Update comment. * s390-tdep.c (s390_gdbarch_init): Update comments. * remote.c: Update comments. * remote-mips.c: Update comments. * proc-api.c (write_with_trace): Do not check for a breakpoint. * mem-break.c: Update comment. * ia64-tdep.c (IA64_BREAKPOINT): Rename BREAKPOINT. (ia64_memory_insert_breakpoint): Update. * config/sparc/tm-sparc.h: Update comment. * config/pa/tm-hppa64.h: Update comment. * rs6000-tdep.c (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Delete macro. (rs6000_breakpoint_from_pc): Update. * mips-tdep.c (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Delete macro. (PMON_BIG_BREAKPOINT, PMON_LITTLE_BREAKPOINT): Delete macro. (IDT_LITTLE_BREAKPOINT, IDT_LITTLE_BREAKPOINT): Delete macro. (MIPS16_LITTLE_BREAKPOINT, MIPS16_BIG_BREAKPOINT): Delete macro. (mips_breakpoint_from_pc): Update. (mips_dump_tdep): Update.
2002-04-18* gdbarch.sh (BREAKPOINT_FROM_PC): Return a const buffer.Andrew Cagney1-5/+7
* gdbarch.h, gdbarch.c: Regenerate. * defs.h (breakpoint_from_pc_fn): Delete type definition. * target.h (memory_breakpoint_from_pc): Update declaration. * config/mcore/tm-mcore.h (mcore_breakpoint_from_p): Ditto. * arch-utils.c (legacy_breakpoint_from_pc): Update return type. * mcore-tdep.c (mcore_breakpoint_from_pc): Ditto. * mem-break.c (memory_breakpoint_from_pc): Ditto. * rs6000-tdep.c (rs6000_breakpoint_from_pc): Ditto. * s390-tdep.c (s390_breakpoint_from_pc): Ditto * xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Ditto. * mn10300-tdep.c (mn10300_breakpoint_from_pc): Ditto. * mips-tdep.c (mips_breakpoint_from_pc): Ditto. * m68hc11-tdep.c (m68hc11_breakpoint_from_pc): Ditto. * ia64-tdep.c (ia64_breakpoint_from_pc): Ditto. * d10v-tdep.c (d10v_breakpoint_from_pc): Ditto. * arch-utils.c (legacy_breakpoint_from_pc): Ditto.. * mem-break.c (default_memory_insert_breakpoint): Make `bp' a const pointer. * monitor.c (monitor_insert_breakpoint): Ditto. * rs6000-tdep.c (rs6000_software_single_step): Ditto for `breakp'. * config/mcore/tm-mcore.h: Update copyright. * mem-break.c: Ditto. * xstormy16-tdep.c: Ditto.
2002-01-05s/BIG_ENDIAN/BFD_ENDIAN_BIG/Andrew Cagney1-2/+2
2001-03-06Update/correct copyright notices.Kevin Buettner1-1/+2
2000-07-30Protoization.Kevin Buettner1-15/+5
2000-04-17* remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.cAndrew Cagney1-8/+0
(MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h (BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE), gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR, FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Delete default definition. Handled by gdbarch. * gdbarch.sh: Make multi-arch defaults, defaults for non- multi-arch targets. (REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC, MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT, REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION): Provide default/legacy implementation. (REGISTER_NAMES, CALL_DUMMY): Allow legacy definition. * gdbarch.h, gdbarch.c: Re-generate.
1999-10-19import gdb-1999-10-18 snapshotJason Molenda1-2/+27
1999-07-07import gdb-1999-07-07 post reformatJason Molenda1-13/+14
1999-04-16Initial creation of sourceware repositorygdb-4_18-branchpointStan Shebs1-0/+124
1999-04-16Initial creation of sourceware repositoryStan Shebs1-102/+0
1991-11-21* defs.h: Incorporate param.h. All users changed.John Gilmore1-88/+12
* param-no-tm.h: Change users to define TM_FILE_OVERRIDE instead. * param.h, param-no-tm.h: Removed. * Update copyrights in all changed files. * dbxread.c, dwarfread.c, inflow.c, infrun.c, m2-exp.y, putenv.c, solib.c, symtab.h, tm-umax.h, valprint.c: Lint. * tm-convex.h, tm-hp300hpux.h, tm-merlin.h, tm-sparc.h, xm-merlin.h: Avoid host include files in target descriptions. * getpagesize.h: Removed, libiberty copes now.
1991-03-28Initial revisionK. Richard Pixley1-0/+178
generated by cgit v1.1 at 2024-12-21 13:15:31 +0000