aboutsummaryrefslogtreecommitdiff
path: root/gdb/maint.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-16[gdb] Make maint info sections print relocated addressesTom de Vries1-18/+21
When running gdb.base/compare-sections.exp with -fPIE/-pie, we get: ... print /u *(unsigned char *) 0x00000238^M Cannot access memory at address 0x238^M (gdb) FAIL: gdb.base/compare-sections.exp: read-only: get value of read-only section ... The problem is that that "maint info sections" prints an unrelocated address: ... [0] 0x00000238->0x00000254 at 0x00000238: .interp ALLOC LOAD READONLY \ DATA HAS_CONTENTS ... while the test expects a relocated address. Given that the documentation states that the command displays "the section information displayed by info files", and that info files shows relocated addresses: ... 0x0000555555554238 - 0x0000555555554254 is .interp ... fix this by showing relocated addresses for maint info sections as well. Build and tested on x86_64-linux. gdb/ChangeLog: 2019-08-16 Tom de Vries <tdevries@suse.de> * maint.c (maintenance_info_sections): Also handle !ALLOBJ case using print_objfile_section_info.
2019-08-07Make first and last lines of 'command help documentation' consistent.Philippe Waroquiers1-10/+11
With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise.
2019-07-09Rename common to gdbsupportTom Tromey1-1/+1
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-07-03Introduce the "with" commandPedro Alves1-0/+28
( See original discussion and prototype here: https://sourceware.org/ml/gdb-patches/2019-05/msg00570.html ) (gdb) help with Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING. Usage: with SETTING [VALUE] [-- COMMAND] Usage: w SETTING [VALUE] [-- COMMAND] With no COMMAND, repeats the last executed command. SETTING is any setting you can change with the "set" subcommands. E.g.: with language pascal -- print obj with print elements unlimited -- print obj As can be seen above, the "with" command is just like "set", but instead of setting the setting permanently, it sets the setting, runs a command and then restores the setting. (gdb) p g_s $1 = {a = 1, b = 2, c = 3} (gdb) with language ada -- print g_s $2 = (a => 1, b => 2, c => 3) Warning: the current language does not match this frame. (gdb) show language The current source language is "auto; currently c". (gdb) with print elements 100 -- with print object on -- print 1 $3 = 1 You can shorten things a bit though, as long as unambiguous. So this: (gdb) with print elements 100 -- with print object off -- print 1 is the same as: (gdb) w p el 100 -- w p o 0 -- p 1 Note that the patch adds a "w" alias for "with", as "w" is not currently taken: (gdb) w Ambiguous command "w": watch, wh, whatis, where, while, while-stepping, winheight, ws. Let me know if you'd prefer to reserve "w" for one of the other commands above. IMHO, this command will end up being used frequently enough that it deserves the "w" shorthand. A nice feature is that this is fully integrated with TAB-completion: (gdb) with p[TAB] pagination print prompt python (gdb) with print [TAB] address max-depth static-members array max-symbolic-offset symbol array-indexes null-stop symbol-filename asm-demangle object symbol-loading demangle pascal_static-members thread-events elements pretty type entry-values raw union frame-arguments repeats vtbl inferior-events sevenbit-strings (gdb) with print [TAB] (gdb) with print elements unlimited -- thread apply all -[TAB] -ascending -c -q -s (gdb) with print elements unlimited -- print -[TAB] -address -max-depth -repeats -vtbl -array -null-stop -static-members -array-indexes -object -symbol -elements -pretty -union The main advantage of this new command compared to command options, like the new "print -OPT", is that this command works with any setting, and, it works nicely when you want to override a setting while running a user-defined command, like: (gdb) with print pretty -- usercmd The disadvantage is that it isn't as compact or easy to type. I think of command options and this command as complementary. I think that even with this new command, it makes sense to continue developing the command options in the direction of exposing most-oft-used settings as command options. Inspired by Philippe's "/" command proposal, if no command is specified, then the last command is re-invoked, under the overridden setting: (gdb) p g_s $1 = {a = 1, b = 2, c = 3} (gdb) with language ada $2 = (a => 1, b => 2, c => 3) Warning: the current language does not match this frame. Note: "with" requires "--" to separate the setting from the command. It might be possible to do without that, but, I haven't tried it yet, and I think that this can go in without it. We can always downgrade to making "--" optional if we manage to make it work. On to the patch itself, the implementation of the command is simpler than one might expect. A few details: - I factored out a bit from pipe_command into repeat_previous directly, because otherwise I'd need to copy&paste the same code and same error message in the with command. - The parse_cli_var_uinteger / parse_cli_var_zuinteger_unlimited / do_set_command changes are necessary since we can now pass an empty string as argument. - do_show_command was split in two, as a FIXME comment suggests, but for a different reason: we need to get a string version of a "set" command's value, and we already had code for that in do_show_command. That code is now factored out to the new get_setshow_command_value_string function. - There's a new "maint with" command added too: (gdb) help maint with Like "with", but works with "maintenance set" variables. Usage: maintenance with SETTING [VALUE] [-- COMMAND] With no COMMAND, repeats the last executed command. SETTING is any setting you can change with the "maintenance set" subcommands. "with" and "maint with" share 99% of the implementation. This might be useful on its own, but it's also useful for testing, since with this, we can use the "maint set/show test-settings" settings for exercising the "with" machinery with all the command type variants (all enum var_types). This is done in the new gdb/base/with.exp testcase. The documentation bits are originally based on Philippe's docs for the "/" command, hence the attribution in the ChangeLog. gdb/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> * NEWS (New commands): Mention "with" and "maint with". * cli/cli-cmds.c (with_command_1, with_command_completer_1) (with_command, with_command_completer): New. (pipe_command): Adjust to new repeat_previous interface. (_initialize_cli_cmds): Install the "with" command and its "w" alias. * cli/cli-cmds.h (with_command_1, with_command_completer_1): New declarations. * cli/cli-setshow.c (parse_cli_var_uinteger) (parse_cli_var_zuinteger_unlimited, do_set_command): Handle empty argument strings for all var_types. (get_setshow_command_value_string): New, factored out from ... (do_show_command): ... this. * cli/cli-setshow.h: Include <string>. (get_setshow_command_value_string): Declare. * command.h (repeat_previous): Now returns const char *. Adjust comment. * maint.c: Include "cli/cli-cmds.h". (maintenance_with_cmd, maintenance_with_cmd_completer): New. (_initialize_maint_cmds): Register the "maintenance with" command. * top.c (repeat_previous): Move bits from pipe_command here: Return the saved command line, if any; error out if there's no command to relaunch. gdb/doc/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.texinfo (Command Settings): New node documenting the general concept of settings, how to change them, and the new "with" command. (Maintenance Commands): Document "maint with". gdb/testsuite/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> * gdb.base/with.c: New file. * gdb.base/with.exp: New file.
2019-06-06Add timestamps to "maint time" outputTom Tromey1-0/+25
Currently "maint time" will print the amount of time a command took. Sometimes, though, it's useful to have a timestamp as well -- for example if one is correlating a gdb log with some other log. This patch adds a timestamp to the start and end of each command when this setting is in effect. This also removes a "//" comment and changes scoped_command_stats to use DISABLE_COPY_AND_ASSIGN; two minor things I noticed while working on the patch. Tested on x86-64 Fedora 29. gdb/ChangeLog 2019-06-06 Tom Tromey <tromey@adacore.com> * maint.h (class scoped_command_stats): Use DISABLE_COPY_AND_ASSIGN. <print_time>: New method. * maint.c (scoped_command_stats, ~scoped_command_stats): Call print_time. (scoped_command_stats::print_time): New method. gdb/testsuite/ChangeLog 2019-06-06 Tom Tromey <tromey@adacore.com> * gdb.base/maint.exp: Expect command started/finished output.
2019-05-08Move "watchdog" to remote.cTom Tromey1-24/+0
The "watchdog" global is only used in remote.c, so this patch moves it there and makes it static. gdb/ChangeLog 2019-05-08 Tom Tromey <tromey@adacore.com> * maint.c (_initialize_maint_cmds): Move initialization code to remote.c. (watchdog, show_watchdog): Move to remote.c. * remote.c (watchdog, show_watchdog): Move from maint.c. Make "watchdog" static. (_initialize_remote): Move initialization code from maint.c. * defs.h (watchdog): Don't declare.
2019-01-25Normalize includes to use common/Tom Tromey1-1/+1
This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes.
2019-01-17Add compunits range adapter to objfileTom Tromey1-1/+1
This removes the objfile_compunits range adapter in favor of using a method on objfile. 2019-01-15 Tom Tromey <tom@tromey.com> * symtab.c (lookup_objfile_from_block) (lookup_symbol_in_objfile_symtabs) (basic_lookup_transparent_type_1, find_pc_sect_compunit_symtab) (find_line_symtab, info_sources_command) (default_collect_symbol_completion_matches_break_on) (make_source_files_completion_list): Update. * symmisc.c (print_objfile_statistics, dump_objfile) (maintenance_print_symbols, maintenance_info_symtabs) (maintenance_check_symtabs, maintenance_info_line_tables): Update. * source.c (select_source_symtab) (forget_cached_source_info_for_objfile): Update. * objfiles.h (class objfile_compunits): Remove. (struct objfile) <compunits_range>: New typedef. (compunits): New method. * objfiles.c (objfile_relocate1): Update. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update. * maint.c (count_symtabs_and_blocks): Update. * linespec.c (iterate_over_all_matching_symtabs): Update. * cp-support.c (add_symbol_overload_list_qualified): Update. * coffread.c (coff_symtab_read): Update. * ada-lang.c (add_nonlocal_symbols) (ada_collect_symbol_completion_matches) (ada_add_global_exceptions): Update.
2019-01-17Change all_objfiles adapter to be a method on program_spaceTom Tromey1-3/+3
This changes the all_objfiles range adapter to be a method on the program space, and fixes up all the users. gdb/ChangeLog 2019-01-17 Tom Tromey <tom@tromey.com> * progspace.h (program_space) <objfiles_range>: New typedef. <objfiles>: New method. <objfiles_head>: Rename from objfiles. (object_files): Update. * guile/scm-progspace.c (gdbscm_progspace_objfiles): Update. * guile/scm-pretty-print.c (ppscm_find_pretty_printer_from_objfiles): Update. * guile/scm-objfile.c (gdbscm_objfiles): Update. * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Update. * python/py-progspace.c (pspy_get_objfiles): Update. * python/py-prettyprint.c (find_pretty_printer_from_objfiles): Update. * python/py-objfile.c (objfpy_lookup_objfile_by_name) (objfpy_lookup_objfile_by_build_id): Update. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update. * windows-tdep.c (windows_iterate_over_objfiles_in_search_order): Update. * symtab.c (iterate_over_symtabs, matching_obj_sections) (expand_symtab_containing_pc, lookup_objfile_from_block) (lookup_static_symbol, basic_lookup_transparent_type) (find_pc_sect_compunit_symtab, find_symbol_at_address) (find_line_symtab, info_sources_command) (default_collect_symbol_completion_matches_break_on) (make_source_files_completion_list, find_main_name): Update. * symmisc.c (print_symbol_bcache_statistics) (print_objfile_statistics, maintenance_print_symbols) (maintenance_print_msymbols, maintenance_print_objfiles) (maintenance_info_symtabs, maintenance_check_symtabs) (maintenance_expand_symtabs, maintenance_info_line_tables): Update. * symfile.c (remove_symbol_file_command, overlay_invalidate_all) (find_pc_overlay, find_pc_mapped_section, list_overlays_command) (map_overlay_command, unmap_overlay_command) (simple_overlay_update, expand_symtabs_matching) (map_symbol_filenames): Update. * symfile-debug.c (set_debug_symfile): Update. * spu-tdep.c (spu_overlay_update, spu_objfile_from_frame): Update. * source.c (select_source_symtab, forget_cached_source_info): Update. * solib.c (solib_read_symbols): Update. * solib-spu.c (append_ocl_sos): Update. * psymtab.c (maintenance_print_psymbols) (maintenance_info_psymtabs, maintenance_check_psymtabs): Update. * probe.c (parse_probes_in_pspace, find_probe_by_pc): Update. * printcmd.c (info_symbol_command): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Update. * objfiles.h (class all_objfiles): Remove. * objfiles.c (have_partial_symbols, have_full_symbols) (have_minimal_symbols, qsort_cmp, update_section_map) (shared_objfile_contains_address_p) (default_iterate_over_objfiles_in_search_order): Update. * objc-lang.c (info_selectors_command, info_classes_command) (find_methods): Update. * minsyms.c (find_solib_trampoline_target): Update. * maint.c (maintenance_info_sections) (maintenance_translate_address, count_symtabs_and_blocks): Update. * main.c (captured_main_1): Update. * linux-thread-db.c (try_thread_db_load_from_pdir) (has_libpthread): Update. * linespec.c (iterate_over_all_matching_symtabs) (search_minsyms_for_name): Update. * jit.c (jit_find_objf_with_entry_addr): Update. * hppa-tdep.c (find_unwind_entry) (hppa_lookup_stub_minimal_symbol): Update. * gcore.c (gcore_create_callback, objfile_find_memory_regions): Update. * elfread.c (elf_gnu_ifunc_resolve_by_cache) (elf_gnu_ifunc_resolve_by_got): Update. * dwarf2-frame.c (dwarf2_frame_find_fde): Update. * dwarf-index-write.c (save_gdb_index_command): Update. * cp-support.c (add_symbol_overload_list_qualified): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * blockframe.c (find_pc_partial_function): Update. * ada-lang.c (ada_lookup_simple_minsym, add_nonlocal_symbols) (ada_collect_symbol_completion_matches) (ada_add_global_exceptions): Update.
2019-01-09Remove ALL_OBJSECTIONSTom Tromey1-8/+8
This removes the ALL_OBJSECTIONS macro, replacing its uses with ranged for loops. The special code in this macro for noticing a "break" from the inner loop was only needed in a single place; so rather than try to replicate this, I've simply replaced that use with a "goto". gdb/ChangeLog 2019-01-09 Tom Tromey <tom@tromey.com> * symfile.c (overlay_invalidate_all, find_pc_overlay) (find_pc_mapped_section, list_overlays_command) (map_overlay_command, unmap_overlay_command) (simple_overlay_update): Use all_objfiles. * spu-tdep.c (spu_overlay_update): Use all_objfiles. * printcmd.c (info_symbol_command): Use all_objfiles. * objfiles.h (ALL_OBJSECTIONS): Remove. * maint.c (maintenance_translate_address): Use all_objfiles. * gcore.c (gcore_create_callback): Use all_objfiles. (objfile_find_memory_regions): Likewise.
2019-01-09Remove ALL_COMPUNIT_FILETABSTom Tromey1-3/+2
This removes ALL_COMPUNIT_FILETABS, replacing its uses with ranged for loops. Because this is still used in the ALL_OBJFILE_FILETABS macro, in some places a declaration had to be removed or renamed to avoid shadowing. gdb/ChangeLog 2019-01-09 Tom Tromey <tom@tromey.com> * symtab.h (ALL_COMPUNIT_FILETABS): Remove. (compunit_filetabs): New. * symtab.c (iterate_over_some_symtabs, find_pc_sect_line): Use compunit_filetabs. (info_sources_command, make_source_files_completion_list): Remove declaration. * symmisc.c (print_objfile_statistics, dump_objfile) (maintenance_print_symbols): Remove declaration. (maintenance_info_symtabs): Use compunit_filetabs. (maintenance_info_line_tables): Likewise. * source.c (select_source_symtab): Change local variable name. (forget_cached_source_info_for_objfile): Remove declaration. * objfiles.h (ALL_OBJFILE_FILETABS): Use compunit_filetabs. * objfiles.c (objfile_relocate1): Remove declaration. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove declaration. * maint.c (count_symtabs_and_blocks): Use compunit_filetabs. * coffread.c (coff_symtab_read): Remove declaration. * buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use compunit_filetabs.
2019-01-09Remove ALL_COMPUNITSTom Tromey1-6/+8
This removes the ALL_COMPUNITS, replacing its uses with two nested ranged for loops. gdb/ChangeLog 2019-01-09 Tom Tromey <tom@tromey.com> * symtab.c (lookup_objfile_from_block) (find_pc_sect_compunit_symtab, search_symbols) (default_collect_symbol_completion_matches_break_on): Use objfile_compunits. * objfiles.h (ALL_COMPUNITS): Remove. * maint.c (count_symtabs_and_blocks): Use objfile_compunits. * cp-support.c (add_symbol_overload_list_qualified): Use objfile_compunits. * ada-lang.c (ada_collect_symbol_completion_matches) (ada_add_global_exceptions): Use objfile_compunits.
2019-01-09Remove ALL_OBJFILE_COMPUNITSTom Tromey1-1/+0
This removes ALL_OBJFILE_COMPUNITS, replacing its uses with ranged for loops. Because ALL_COMPUNITS is also updated, in some places a declaration must be deleted to avoid shadowing. gdb/ChangeLog 2019-01-09 Tom Tromey <tom@tromey.com> * source.c (select_source_symtab) (forget_cached_source_info_for_objfile): Remove declaration. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove declaration. * maint.c (count_symtabs_and_blocks): Remove declaration. * cp-support.c (add_symbol_overload_list_qualified): Remove declaration. * coffread.c (coff_symtab_read): Remove declaration. * symtab.c (lookup_symbol_in_objfile_symtabs) (basic_lookup_transparent_type_1): Use objfile_compunits. (lookup_objfile_from_block, find_pc_sect_compunit_symtab) (info_sources_command, search_symbols) (default_collect_symbol_completion_matches_break_on) (make_source_files_completion_list): Remove declaration. * ada-lang.c (add_nonlocal_symbols): Use objfile_compunits. (ada_collect_symbol_completion_matches) (ada_add_global_exceptions): Remove declaration. * linespec.c (iterate_over_all_matching_symtabs): Use objfile_compunits. * objfiles.h (ALL_OBJFILE_COMPUNITS): Remove. (class objfile_compunits): New. (ALL_COMPUNITS): Use objfile_compunits. * symmisc.c (print_objfile_statistics, maintenance_info_symtabs) (maintenance_check_symtabs, maintenance_info_line_tables): Use objfile_compunits. * objfiles.c (objfile_relocate1): Use objfile_compunits.
2019-01-09Remove most uses of ALL_OBJFILESTom Tromey1-2/+1
This removes most uses of ALL_OBJFILES, replacing them with ranged for loops. The remaining uses are all in macros, and will be removed in subsequent patches. gdb/ChangeLog 2019-01-09 Tom Tromey <tom@tromey.com> * symtab.c (iterate_over_symtabs, matching_obj_sections) (expand_symtab_containing_pc, lookup_static_symbol) (basic_lookup_transparent_type, find_pc_sect_compunit_symtab) (find_symbol_at_address, find_line_symtab, find_main_name): Use all_objfiles. * probe.c (find_probe_by_pc, collect_probes): Use all_objfiles. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Use all_objfiles. * linux-thread-db.c (try_thread_db_load_from_pdir) (has_libpthread): Use all_objfiles. * ada-lang.c (add_nonlocal_symbols): Use all_objfiles. * linespec.c (iterate_over_all_matching_symtabs) (search_minsyms_for_name): Use all_objfiles. * maint.c (maintenance_info_sections): Use all_objfiles. * main.c (captured_main_1): Use all_objfiles. * spu-tdep.c (spu_objfile_from_frame): Use all_objfiles. * guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles. * guile/scm-pretty-print.c (ppscm_find_pretty_printer_from_objfiles): Use all_objfiles. * solib-spu.c (append_ocl_sos): Use all_objfiles. * symmisc.c (maintenance_print_symbols): Use all_objfiles. (maintenance_print_msymbols): Use all_objfiles. * source.c (select_source_symtab): Use all_objfiles. * jit.c (jit_find_objf_with_entry_addr): Use all_objfiles. * symfile.c (remove_symbol_file_command) (expand_symtabs_matching, map_symbol_filenames): Use all_objfiles. * ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use all_objfiles. * dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles. * objc-lang.c (find_methods): Use all_objfiles. * objfiles.c (have_partial_symbols, have_full_symbols) (have_minimal_symbols, qsort_cmp) (default_iterate_over_objfiles_in_search_order): Use all_objfiles. * hppa-tdep.c (find_unwind_entry): Use all_objfiles. * psymtab.c (maintenance_print_psymbols): Use all_objfiles. (maintenance_check_psymtabs): Use all_objfiles. (ALL_PSYMTABS): Remove. * compile/compile-object-run.c (do_module_cleanup): Use all_objfiles. * blockframe.c (find_pc_partial_function): Use all_objfiles. * cp-support.c (add_symbol_overload_list_qualified): Use all_objfiles. * windows-tdep.c (windows_iterate_over_objfiles_in_search_order): Use all_objfiles. * dwarf-index-write.c (save_gdb_index_command): Use all_objfiles. * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use all_objfiles. * python/py-objfile.c (objfpy_lookup_objfile_by_name) (objfpy_lookup_objfile_by_build_id): Use all_objfiles. * python/py-prettyprint.c (find_pretty_printer_from_objfiles): Uses all_objfiles. * solib.c (solib_read_symbols): Use all_objfiles
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-10-10Add parameter to allow enabling/disabling selftests via configureSergio Durigan Junior1-2/+2
This is a follow-up of: https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html Instead of going throttle and always enabling our selftests (even in non-development builds), this patch is a bit more conservative and introduces a configure option ("--enable-unit-tests") that allows the user to choose whether she wants unit tests in the build or not. Note that the current behaviour is retained: if no option is provided, GDB will have selftests included in a development build, and will *not* have selftests included in a non-development build. The rationale for having this option is still the same: due to the many racy testcases and random failures we see when running the GDB testsuite, it is unfortunately not possible to perform a full test when one is building a downstream package. As the Fedora GDB maintainer and one of the Debian GDB uploaders, I feel like this situation could be improved by, at least, executing our selftests after the package has been built. This patch introduces no regressions to our build. OK? gdb/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * README (`configure' options): Add documentation for new "--enable-unit-tests" option. * acinclude.m4: Include "selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * maint.c (maintenance_selftest): Update message informing that selftests have been disabled. (maintenance_info_selftests): Likewise. * selftest.m4: New file. gdb/gdbserver/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * acinclude.m4: Include "../selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * configure.srv: Use "$enable_unittests" instead of "$development" when checking whether unit tests have been enabled. * server.c (captured_main): Update message informing that selftests have been disabled. gdb/testsuite/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.gdb/unittest.exp: Update expected message informing that selftests have been disabled. * gdb.server/unittest.exp: Likewise. squash! Add parameter to allow enabling/disabling selftests via configure
2018-09-16Use GNU style for metasyntactic variables in gdbTom Tromey1-1/+1
I searched for other spots that did not use the GNU style for metasyntactic syntactic variables. This patch fixes most of the ones I found in gdb proper. There are a few remaining in MI, but I was unsure whether those should be touched. gdb/ChangeLog 2018-09-16 Tom Tromey <tom@tromey.com> * top.c (new_ui_command): Use GNU style for metasyntactic variables. * breakpoint.c (stopat_command): Use GNU style for metasyntactic variables. * maint.c (maintenance_translate_address): Remove "<>" around text. * interps.c (interpreter_exec_cmd): Use GNU style for metasyntactic variables. * nto-procfs.c (nto_procfs_target_info): Use GNU style for metasyntactic variables. * tracepoint.c (tfind_range_command): Use GNU style for metasyntactic variables. (tfind_outside_command): Likewise. (_initialize_tracepoint): Likewise. * remote.c (extended_remote_target::create_inferior): Use GNU style for metasyntactic variables. * sparc64-tdep.c (adi_examine_command): Use GNU style for metasyntactic variables. (adi_assign_command): Likewise. gdb/testsuite/ChangeLog 2018-09-16 Tom Tromey <tom@tromey.com> * gdb.base/new-ui.exp (do_execution_tests): Update. * gdb.base/dbx.exp (test_breakpoints): Update.
2018-07-04darwin: Don't use sbrkSimon Marchi1-2/+2
This patch gets rid of this warning on macOS: CXX main.o /Users/simark/src/binutils-gdb/gdb/main.c:492:27: error: 'sbrk' is deprecated [-Werror,-Wdeprecated-declarations] lim_at_start = (char *) sbrk (0); ^ /usr/include/unistd.h:585:1: note: 'sbrk' has been explicitly marked deprecated here __deprecated __WATCHOS_PROHIBITED __TVOS_PROHIBITED ^ /usr/include/sys/cdefs.h:176:37: note: expanded from macro '__deprecated' #define __deprecated __attribute__((deprecated)) ^ sbrk on macOS is not useful for our purposes, since sbrk(0) always returns the same value. From what I read, brk/sbrk on macOS is just an emulation, it always returns a pointer in a 4MB section reserved for that. So instead of letting users use "maint set per-command space on" and print silly results, I think we should just disable that feature for this platform (as we do for platforms that don't have sbrk). I defined a HAVE_USEFUL_SBRK macro and used that instead of HAVE_SBRK. gdb/ChangeLog: * common/common-defs.h (HAVE_USEFUL_SBRK): Define. * main.c: Use HAVE_USEFUL_SBRK instead of HAVE_SBRK. * maint.c: Likewise. * top.c: Likewise.
2018-02-13Fix prefix of maint set/show per-commandSimon Marchi1-2/+2
I noticed this: (gdb) apropos per-command maintenance set per-command -- Per-command statistics settings set per-command space -- Set whether to display per-command space usage set per-command symtab -- Set whether to display per-command symtab statistics set per-command time -- Set whether to display per-command execution time maintenance show per-command -- Show per-command statistics settings show per-command space -- Show whether to display per-command space usage show per-command symtab -- Show whether to display per-command symtab statistics show per-command time -- Show whether to display per-command execution time The subcommands of "maintenance set per-command" are missing the maintenance keyword. This is because that command is registered with the wrong prefix. This patch fixes that. gdb/ChangeLog: * maint.c (_initialize_maint_cmds): Fix prefix of maint set/show per-command.
2018-01-08Fix GDB build failure when $development is falseYao Qi1-0/+10
We don't build GDB selftests bits when $development is false. However, if we turn bfd/development.sh:$development to false, common/selftest.c is compiled which is not expected. It causes the build failure, selftest.o: In function `selftests::run_tests(char const*)': binutils-gdb/gdb/common/selftest.c:97: undefined reference to `selftests::reset()' collect2: error: ld returned 1 exit status I fix this issue by putting selftest.o selftest-arch.o into CONFIG_OBS only when $development is true. After this is fixed, there are other build failures in maint.c, this patch fixes them as well. In the release mode, the output of these commands are: (gdb) maintenance selftest Selftests are not available in a non-development build. (gdb) maintenance selftest foo Selftests are not available in a non-development build. (gdb) maintenance info selftests Selftests are not available in a non-development build. gdb: 2018-01-08 Yao Qi <yao.qi@linaro.org> Simon Marchi <simon.marchi@ericsson.com> * Makefile.in (COMMON_SFILES): Remove selftest-arch.c and common/selftest.c. (COMMON_OBS): Remove selftest.o. * configure.ac: Append selftest-arch.c and common/selftest.c to CONFIG_SRCS. Append selftest-arch.o and selftest.o to COMMON_OBS. * configure: Re-generated. * maint.c (maintenance_selftest): Wrap selftests::run_tests with GDB_SELF_TEST. (maintenance_info_selftests): Likewise. gdb/testsuite: 2018-01-08 Simon Marchi <simon.marchi@ericsson.com> * gdb.gdb/unittest.exp: Match output in non-development mode.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-11-07Constify add_setshow_*Tom Tromey1-2/+2
This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify.
2017-11-07Remove cmd_cfunc_ftypeTom Tromey1-15/+12
This removes cmd_cfunc_ftype and the non-const overload of add_cmd; then fixes up the fallout. For the most part this patch is straightforward. There are a few files (go32-nat.c, windows-nat.c, and gnu-nat.c) that I could not compile; so I made a best effort there. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * go32-nat.c (go32_sysinfo, go32_sldt, go32_sgdt, go32_sidt) (go32_pde, go32_pte, go32_pte_for_address): Constify. * gnu-nat.c (_parse_bool_arg, show_thread_default_pause_cmd) (set_thread_default_pause_cmd, set_thread_default_run_cmd) (show_thread_default_run_cmd, set_thread_default_detach_sc_cmd) (parse_int_arg, show_thread_default_detach_sc_cmd) (set_signals_cmd, show_signals_cmd, set_sig_thread_cmd) (show_sig_thread_cmd, set_stopped_cmd, show_stopped_cmd) (set_exceptions_cmd, show_exceptions_cmd, set_task_pause_cmd) (show_task_pause_cmd, set_task_detach_sc_cmd) (show_task_detach_sc_cmd, set_task_exc_port_cmd) (set_noninvasive_cmd, set_thread_pause_cmd) (show_thread_pause_cmd, set_thread_run_cmd, show_thread_run_cmd) (set_thread_detach_sc_cmd, show_thread_detach_sc_cmd) (set_thread_exc_port_cmd, thread_takeover_sc_cmd): Constify. * windows-nat.c (display_selectors): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Remove non-const "cfunc". * cli/cli-decode.c (set_cmd_cfunc): Remove non-const overload. (cmd_cfunc_eq): Likewise. (struct cmd_list_element): Likewise. (do_cfunc): Remove. (cli_user_command_p): Update. * command.h (add_cmd): Remove non-const overload. (cmd_cfunc_ftype): Remove typedef. (cmd_cfunc_eq): Remove non-const overload. * value.c (show_values): Constify. * thread.c (thread_apply_all_command): Constify. * symfile.c (load_command): Constify. * source.c (directory_command): Constify. * maint.c (maintenance_internal_error) (maintenance_demangler_warning, maintenance_space_display) (maintenance_print_architecture, maintenance_translate_address) (maintenance_info_selftests, maintenance_internal_warning): Constify. * breakpoint.c (disable_trace_command, enable_trace_command): Constify. * auto-load.c (info_auto_load_local_gdbinit, add_auto_load_dir): Constify. (add_auto_load_safe_path): Constify. * guile/scm-auto-load.c (info_auto_load_guile_scripts): Constify. * top.h (show_commands): Constify. * linux-thread-db.c (info_auto_load_libthread_db): Constify. * sparc64-tdep.c (adi_examine_command): Constify. (adi_assign_command): Constify.
2017-10-11Constify add_prefix_cmdTom Tromey1-14/+8
This changes add_prefix_cmd to accept a const-taking function as an argument; then fixes up all the callers. In a couple of spots I had to add a non-const overload of a function, because the function is passed to two different command-adding "constructors". These overloads are temporary; once constification is complete they can be removed. This patch also fixes a typo I happened to notice while constifying. Note that this touches a couple of files (gnu-nat.c and go32-nat.c) that I can't build. So, while I made a best-effort there, I am not certain they will still compile. Tested by rebuilding. gdb/ChangeLog 2017-10-11 Tom Tromey <tom@tromey.com> * gdbthread.h (thread_command): Constify. * inferior.h (detach_command): Constify. * top.h (set_history, show_history): Constify. * arm-tdep.c (set_arm_command, show_arm_command): Constify. * serial.c (serial_set_cmd, serial_show_cmd): Constify. * bsd-kvm.c (bsd_kvm_cmd): Constify. * printcmd.c (set_command): Constify. (non_const_set_command): New function. * dcache.c (set_dcache_command, show_dcache_command): Constify. * breakpoint.c (enable_command, disable_command, delete_command) (catch_command, tcatch_command, set_breakpoint_cmd) (show_breakpoint_cmd): Constify. * macrocmd.c (macro_command): Constify. * infcmd.c (unset_command, kill_command, detach_command) (info_proc_cmd): Constify. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify. * auto-load.c (show_auto_load_cmd, set_auto_load_cmd) (info_auto_load_cmd): Constify. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Constify. * ada-lang.c (set_ada_command, show_ada_command) (maint_set_ada_cmd, maint_show_ada_cmd): Constify. * guile/guile.c (set_guile_command, show_guile_command) (info_guile_command): Constify. * tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd): Constify. * skip.c (skip_command): Constify. * compile/compile.c (_initialize_compile): Constify. * dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd): Constify. * remote.c (set_remote_cmd, show_remote_cmd, remote_command): Constify. * python/python.c (user_show_python, user_set_python): Constify. * mips-tdep.c (set_mips_command, show_mips_command) (set_mipsfpu_command): Constify. * record-btrace.c (cmd_record_btrace_start) (cmd_set_record_btrace, cmd_show_record_btrace) (cmd_set_record_btrace_bts, cmd_show_record_btrace_bts) (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command): Constify. * symfile.c (overlay_command): Constify. * spu-tdep.c (set_spu_command, show_spu_command): Constify. * cli/cli-logging.c (set_logging_command, show_logging_command): Constify. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * cli/cli-cmds.c (info_command, show_command, set_debug) (show_debug): Constify. (show_command): Add non-const overload. * top.c (set_history, show_history): Constify. * sh-tdep.c (set_sh_command, show_sh_command): Constify. * command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype. * target.c (target_command): Constify. * sparc64-tdep.c (info_adi_command): Constify. * record-full.c (cmd_record_full_start): Constify. (set_record_full_command): Constify. Fix typo. (show_record_full_command): Constify. * thread.c (thread_command, thread_apply_command): Constify. * memattr.c (dummy_cmd): Constify. * value.c (function_command): Constify. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify. * probe.c (info_probes_command): Constify. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify. * gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd) (show_thread_cmd, set_thread_default_cmd) (show_thread_default_cmd): Constify. (check_empty): Constify. * tracepoint.c (tfind_command): Constify. * cp-support.c (maint_cplus_command): Constify. * windows-tdep.c (info_w32_command): Constify. * record.c (cmd_record_start, set_record_command) (show_record_command, info_record_command, cmd_record_goto): Constify. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Constify. * utils.c (set_internal_problem_cmd, show_internal_problem_cmd): Constify. (add_internal_problem_command): Remove casts. * arc-tdep.c (maintenance_print_arc_command): Constify. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Constify. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd) (maintenance_show_cmd, set_per_command_cmd) (show_per_command_cmd, maintenance_check_command): Constify. * language.c (set_check, show_check): Constify. * typeprint.c (show_print_type, set_print_type): Constify. * go32-nat.c (go32_info_dos_command): Constify.
2017-09-27Constify commands maint.c, plus maintenance_print_typeTom Tromey1-24/+15
In addition to the constification, this fixes a command-repeat bug. gdb/ChangeLog 2017-09-27 Tom Tromey <tom@tromey.com> * typeprint.c (maintenance_print_type): Constify. * maint.c (maintenance_dump_me, maintenance_demangle) (maintenance_time_display, maintenance_info_sections) (maintenance_print_statistics, maintenance_deprecate) (maintenance_undeprecate): Constify. (maintenance_do_deprecate): Constify. Use std::string. (maintenance_selftest): Constify. * gdbtypes.h (maintenance_print_type): Constify.
2017-09-16Add selftests run filteringSimon Marchi1-3/+15
With the growing number of selftests, I think it would be useful to be able to run only a subset of the tests. This patch associates a name to each registered selftest. It then allows doing something like: (gdb) maintenance selftest aarch64 Running self-tests. Running selftest aarch64-analyze-prologue. Running selftest aarch64-process-record. Ran 2 unit tests, 0 failed or with gdbserver: ./gdbserver --selftest=aarch64 In both cases, only the tests that contain "aarch64" in their name are ran. To help validate that the tests you want to run were actually ran, it also prints a message with the test name before running each test. Right now, all the arch-dependent tests are registered as a single test of the selftests. To be able to filter those too, I made them "first-class citizen" selftests. The selftest type is an interface, with different implementations for "simple selftests" and "arch selftests". The run_tests function simply iterates on that an invokes operator() on each test. I changed the tests data structure from a vector to a map, because - it allows iterating in a stable (alphabetical) order - it allows to easily verify if a test with a given name has been registered, to avoid duplicates There's also a new command "maintenance info selftests" that lists the registered selftests. gdb/ChangeLog: * common/selftest.h (selftest): New struct/interface. (register_test): Add name parameter, add new overload. (run_tests): Add filter parameter. (for_each_selftest_ftype): New typedef. (for_each_selftest): New declaration. * common/selftest.c (tests): Change type to map<string, unique_ptr<selftest>>. (simple_selftest): New struct. (register_test): New function. (register_test): Add name parameter and use it. (run_tests): Add filter parameter and use it. Add prints. Adjust to vector -> map change. * aarch64-tdep.c (_initialize_aarch64_tdep): Add names when registering selftests. * arm-tdep.c (_initialize_arm_tdep): Likewise. * disasm-selftests.c (_initialize_disasm_selftests): Likewise. * dwarf2-frame.c (_initialize_dwarf2_frame): Likewise. * dwarf2loc.c (_initialize_dwarf2loc): Likewise. * findvar.c (_initialize_findvar): Likewise. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Likewise. * maint.c (maintenance_selftest): Update call to run_tests. (maintenance_info_selftests): New function. (_initialize_maint_cmds): Register "maintenance info selftests" command. Update "maintenance selftest" doc. * regcache.c (_initialize_regcache): Add names when registering selftests. * rust-exp.y (_initialize_rust_exp): Likewise. * selftest-arch.c (gdbarch_selftest): New struct. (gdbarch_tests): Remove. (register_test_foreach_arch): Add name parameter. Call register_test. (tests_with_arch): Remove, move most content to gdbarch_selftest::operator(). (_initialize_selftests_foreach_arch): Remove. * selftest-arch.h (register_test_foreach_arch): Add name parameter. (run_tests_with_arch): New declaration. * utils-selftests.c (_initialize_utils_selftests): Add names when registering selftests. * utils.c (_initialize_utils): Likewise. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Likewise. * unittests/environ-selftests.c (_initialize_environ_selftests): Likewise. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Likewise. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Likewise. * unittests/optional-selftests.c (_initialize_optional_selftests): Likewise. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Likewise. * NEWS: Document "maintenance selftest" and "maint info selftests". gdb/gdbserver/ChangeLog: * server.c (captured_main): Accept argument for --selftest. Update run_tests call. * linux-x86-tdesc-selftest.c (initialize_low_tdesc): Add names when registering selftests. gdb/doc/ChangeLog: * gdb.texinfo (Maintenance Commands): Document filter parameter of "maint selftest". Document "maint info selftests" command.
2017-09-09Remove unnecessary function prototypes.John Baldwin1-2/+0
These prototypes were required when compiling GDB as C but are not required for C++. gdb/ChangeLog: * aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat prototype. * aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep prototype. * aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep prototype. * aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype. * ada-exp.y: Remove _initialize_ada_exp prototype. * ada-lang.c: Remove _initialize_ada_language prototype. * ada-tasks.c: Remove _initialize_tasks prototype. * addrmap.c: Remove _initialize_addrmap prototype. * agent.c: Remove _initialize_agent prototype. * aix-thread.c: Remove _initialize_aix_thread prototype. * alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype. * alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype. * alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep prototype. * alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype. * alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype. * alpha-tdep.c: Remove _initialize_alpha_tdep prototype. * amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep prototype. * amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep prototype. * amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype. * amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype. * amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype. * amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep prototype. * amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype. * amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype. * amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype. * amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype. * amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * amd64-tdep.c: Remove _initialize_amd64_tdep prototype. * amd64-windows-nat.c: Remove _initialize_amd64_windows_nat prototype. * amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep prototype. * annotate.c: Remove _initialize_annotate prototype. * arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype. * arc-tdep.c: Remove _initialize_arc_tdep prototype. * arch-utils.c: Remove _initialize_gdbarch_utils prototype. * arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype. * arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype. * arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype. * arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype. * arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep prototype. * arm-tdep.c: Remove _initialize_arm_tdep prototype. * arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype. * auto-load.c: Remove _initialize_auto_load prototype. * auxv.c: Remove _initialize_auxv prototype. * avr-tdep.c: Remove _initialize_avr_tdep prototype. * ax-gdb.c: Remove _initialize_ax_gdb prototype. * bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype. * bfin-tdep.c: Remove _initialize_bfin_tdep prototype. * break-catch-sig.c: Remove _initialize_break_catch_sig prototype. * break-catch-syscall.c: Remove _initialize_break_catch_syscall prototype. * break-catch-throw.c: Remove _initialize_break_catch_throw prototype. * breakpoint.c: Remove _initialize_breakpoint prototype. * bsd-uthread.c: Remove _initialize_bsd_uthread prototype. * btrace.c: Remove _initialize_btrace prototype. * charset.c: Remove _initialize_charset prototype. * cli/cli-cmds.c: Remove _initialize_cli_cmds prototype. * cli/cli-dump.c: Remove _initialize_cli_dump prototype. * cli/cli-interp.c: Remove _initialize_cli_interp prototype. * cli/cli-logging.c: Remove _initialize_cli_logging prototype. * cli/cli-script.c: Remove _initialize_cli_script prototype. * coff-pe-read.c: Remove _initialize_coff_pe_read prototype. * coffread.c: Remove _initialize_coffread prototype. * compile/compile.c: Remove _initialize_compile prototype. * complaints.c: Remove _initialize_complaints prototype. * completer.c: Remove _initialize_completer prototype. * copying.awk: Remove _initialize_copying prototype. * copying.c: Regenerate. * core-regset.c: Remove _initialize_core_regset prototype. * corefile.c: Remove _initialize_core prototype. * corelow.c: Remove _initialize_corelow prototype. * cp-abi.c: Remove _initialize_cp_abi prototype. * cp-namespace.c: Remove _initialize_cp_namespace prototype. * cp-support.c: Remove _initialize_cp_support prototype. * cp-valprint.c: Remove _initialize_cp_valprint prototype. * cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype. * cris-tdep.c: Remove _initialize_cris_tdep prototype. * ctf.c: Remove _initialize_ctf prototype. * d-lang.c: Remove _initialize_d_language prototype. * darwin-nat-info.c: Remove _initialize_darwin_info_commands prototype. * darwin-nat.c: Remove _initialize_darwin_inferior prototype. * dbxread.c: Remove _initialize_dbxread prototype. * dcache.c: Remove _initialize_dcache prototype. * demangle.c: Remove _initialize_demangler prototype. * disasm-selftests.c: Remove _initialize_disasm_selftests prototype. * disasm.c: Remove _initialize_disasm prototype. * dtrace-probe.c: Remove _initialize_dtrace_probe prototype. * dummy-frame.c: Remove _initialize_dummy_frame prototype. * dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame prototype. * dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype. * dwarf2expr.c: Remove _initialize_dwarf2expr prototype. * dwarf2loc.c: Remove _initialize_dwarf2loc prototype. * dwarf2read.c: Remove _initialize_dwarf2_read prototype. * elfread.c: Remove _initialize_elfread prototype. * exec.c: Remove _initialize_exec prototype. * extension.c: Remove _initialize_extension prototype. * f-lang.c: Remove _initialize_f_language prototype. * f-valprint.c: Remove _initialize_f_valprint prototype. * fbsd-nat.c: Remove _initialize_fbsd_nat prototype. * fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype. * filesystem.c: Remove _initialize_filesystem prototype. * findcmd.c: Remove _initialize_mem_search prototype. * fork-child.c: Remove _initialize_fork_child prototype. * frame-base.c: Remove _initialize_frame_base prototype. * frame-unwind.c: Remove _initialize_frame_unwind prototype. * frame.c: Remove _initialize_frame prototype. * frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype. * frv-tdep.c: Remove _initialize_frv_tdep prototype. * ft32-tdep.c: Remove _initialize_ft32_tdep prototype. * gcore.c: Remove _initialize_gcore prototype. * gdb_bfd.c: Remove _initialize_gdb_bfd prototype. * gdbarch.c: Regenerate. * gdbarch.sh: Remove _initialize_gdbarch prototype. * gdbtypes.c: Remove _initialize_gdbtypes prototype. * gnu-nat.c: Remove _initialize_gnu_nat prototype. * gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype. * gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype. * go-lang.c: Remove _initialize_go_language prototype. * go32-nat.c: Remove _initialize_go32_nat prototype. * guile/guile.c: Remove _initialize_guile prototype. * h8300-tdep.c: Remove _initialize_h8300_tdep prototype. * hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype. * hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype. * hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype. * hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype. * hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype. * hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype. * hppa-tdep.c: Remove _initialize_hppa_tdep prototype. * i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype. * i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep prototype. * i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep prototype. * i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype. * i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype. * i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype. * i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype. * i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype. * i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype. * i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype. * i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype. * i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype. * i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype. * i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype. * i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype. * i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype. * i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * i386-tdep.c: Remove _initialize_i386_tdep prototype. * i386-windows-nat.c: Remove _initialize_i386_windows_nat prototype. * ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame prototype. * ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype. * ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype. * ia64-tdep.c: Remove _initialize_ia64_tdep prototype. * ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype. * infcall.c: Remove _initialize_infcall prototype. * infcmd.c: Remove _initialize_infcmd prototype. * inferior.c: Remove _initialize_inferiors prototype. * inflow.c: Remove _initialize_inflow prototype. * infrun.c: Remove _initialize_infrun prototype. * interps.c: Remove _initialize_interpreter prototype. * iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype. * jit.c: Remove _initialize_jit prototype. * language.c: Remove _initialize_language prototype. * linux-fork.c: Remove _initialize_linux_fork prototype. * linux-nat.c: Remove _initialize_linux_nat prototype. * linux-tdep.c: Remove _initialize_linux_tdep prototype. * linux-thread-db.c: Remove _initialize_thread_db prototype. * lm32-tdep.c: Remove _initialize_lm32_tdep prototype. * m2-lang.c: Remove _initialize_m2_language prototype. * m32c-tdep.c: Remove _initialize_m32c_tdep prototype. * m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype. * m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype. * m32r-tdep.c: Remove _initialize_m32r_tdep prototype. * m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype. * m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-tdep.c: Remove _initialize_m68k_tdep prototype. * m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * machoread.c: Remove _initialize_machoread prototype. * macrocmd.c: Remove _initialize_macrocmd prototype. * macroscope.c: Remove _initialize_macroscope prototype. * maint.c: Remove _initialize_maint_cmds prototype. * mdebugread.c: Remove _initialize_mdebugread prototype. * memattr.c: Remove _initialize_mem prototype. * mep-tdep.c: Remove _initialize_mep_tdep prototype. * mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype. * mi/mi-cmds.c: Remove _initialize_mi_cmds prototype. * mi/mi-interp.c: Remove _initialize_mi_interp prototype. * mi/mi-main.c: Remove _initialize_mi_main prototype. * microblaze-linux-tdep.c: Remove _initialize_microblaze_linux_tdep prototype. * microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype. * mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype. * mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype. * mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype. * mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype. * mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype. * mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype. * mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype. * mips-tdep.c: Remove _initialize_mips_tdep prototype. * mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype. * mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep prototype. * mipsread.c: Remove _initialize_mipsread prototype. * mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep prototype. * mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype. * moxie-tdep.c: Remove _initialize_moxie_tdep prototype. * msp430-tdep.c: Remove _initialize_msp430_tdep prototype. * mt-tdep.c: Remove _initialize_mt_tdep prototype. * nds32-tdep.c: Remove _initialize_nds32_tdep prototype. * nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep prototype. * nios2-tdep.c: Remove _initialize_nios2_tdep prototype. * nto-procfs.c: Remove _initialize_procfs prototype. * nto-tdep.c: Remove _initialize_nto_tdep prototype. * objc-lang.c: Remove _initialize_objc_language prototype. * objfiles.c: Remove _initialize_objfiles prototype. * observer.c: Remove observer_test_first_notification_function, observer_test_second_notification_function, observer_test_third_notification_function, and _initialize_observer prototypes. * opencl-lang.c: Remove _initialize_opencl_language prototypes. * osabi.c: Remove _initialize_gdb_osabi prototype. * osdata.c: Remove _initialize_osdata prototype. * p-valprint.c: Remove _initialize_pascal_valprint prototype. * parse.c: Remove _initialize_parse prototype. * ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype. * ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype. * ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype. * ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype. * ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype. * ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype. * ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype. * ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype. * printcmd.c: Remove _initialize_printcmd prototype. * probe.c: Remove _initialize_probe prototype. * proc-api.c: Remove _initialize_proc_api prototype. * proc-events.c: Remove _initialize_proc_events prototype. * proc-service.c: Remove _initialize_proc_service prototype. * procfs.c: Remove _initialize_procfs prototype. * psymtab.c: Remove _initialize_psymtab prototype. * python/python.c: Remove _initialize_python prototype. * ravenscar-thread.c: Remove _initialize_ravenscar prototype. * record-btrace.c: Remove _initialize_record_btrace prototype. * record-full.c: Remove _initialize_record_full prototype. * record.c: Remove _initialize_record prototype. * regcache.c: Remove _initialize_regcache prototype. * reggroups.c: Remove _initialize_reggroup prototype. * remote-notif.c: Remove _initialize_notif prototype. * remote-sim.c: Remove _initialize_remote_sim prototype. * remote.c: Remove _initialize_remote prototype. * reverse.c: Remove _initialize_reverse prototype. * rl78-tdep.c: Remove _initialize_rl78_tdep prototype. * rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype. * rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep prototype. * rs6000-nat.c: Remove _initialize_rs6000_nat prototype. * rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype. * rust-exp.y: Remove _initialize_rust_exp prototype. * rx-tdep.c: Remove _initialize_rx_tdep prototype. * s390-linux-nat.c: Remove _initialize_s390_nat prototype. * s390-linux-tdep.c: Remove _initialize_s390_tdep prototype. * score-tdep.c: Remove _initialize_score_tdep prototype. * selftest-arch.c: Remove _initialize_selftests_foreach_arch prototype. * ser-go32.c: Remove _initialize_ser_dos prototype. * ser-mingw.c: Remove _initialize_ser_windows prototype. * ser-pipe.c: Remove _initialize_ser_pipe prototype. * ser-tcp.c: Remove _initialize_ser_tcp prototype. * ser-unix.c: Remove _initialize_ser_hardwire prototype. * serial.c: Remove _initialize_serial prototype. * sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype. * sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype. * sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype. * sh-tdep.c: Remove _initialize_sh_tdep prototype. * skip.c: Remove _initialize_step_skip prototype. * sol-thread.c: Remove _initialize_sol_thread prototype. * solib-aix.c: Remove _initialize_solib_aix prototype. * solib-darwin.c: Remove _initialize_darwin_solib prototype. * solib-dsbt.c: Remove _initialize_dsbt_solib prototype. * solib-frv.c: Remove _initialize_frv_solib prototype. * solib-spu.c: Remove _initialize_spu_solib prototype. * solib-svr4.c: Remove _initialize_svr4_solib prototype. * solib-target.c: Remove _initialize_solib_target prototype. * solib.c: Remove _initialize_solib prototype. * source.c: Remove _initialize_source prototype. * sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype. * sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep prototype. * sparc-nat.c: Remove _initialize_sparc_nat prototype. * sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype. * sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype. * sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep prototype. * sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype. * sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype. * sparc-tdep.c: Remove _initialize_sparc_tdep prototype. * sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat prototype. * sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep prototype. * sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat prototype. * sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep prototype. * sparc64-nat.c: Remove _initialize_sparc64_nat prototype. * sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat prototype. * sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep prototype. * sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat prototype. * sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep prototype. * sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep prototype. * spu-linux-nat.c: Remove _initialize_spu_nat prototype. * spu-multiarch.c: Remove _initialize_spu_multiarch prototype. * spu-tdep.c: Remove _initialize_spu_tdep prototype. * stabsread.c: Remove _initialize_stabsread prototype. * stack.c: Remove _initialize_stack prototype. * stap-probe.c: Remove _initialize_stap_probe prototype. * std-regs.c: Remove _initialize_frame_reg prototype. * symfile-debug.c: Remove _initialize_symfile_debug prototype. * symfile-mem.c: Remove _initialize_symfile_mem prototype. * symfile.c: Remove _initialize_symfile prototype. * symmisc.c: Remove _initialize_symmisc prototype. * symtab.c: Remove _initialize_symtab prototype. * target-dcache.c: Remove _initialize_target_dcache prototype. * target-descriptions.c: Remove _initialize_target_descriptions prototype. * thread.c: Remove _initialize_thread prototype. * tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep prototype. * tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype. * tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype. * tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep prototype. * tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype. * tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype. * tracefile.c: Remove _initialize_tracefile prototype. * tracepoint.c: Remove _initialize_tracepoint prototype. * tui/tui-hooks.c: Remove _initialize_tui_hooks prototype. * tui/tui-interp.c: Remove _initialize_tui_interp prototype. * tui/tui-layout.c: Remove _initialize_tui_layout prototype. * tui/tui-regs.c: Remove _initialize_tui_regs prototype. * tui/tui-stack.c: Remove _initialize_tui_stack prototype. * tui/tui-win.c: Remove _initialize_tui_win prototype. * tui/tui.c: Remove _initialize_tui prototype. * typeprint.c: Remove _initialize_typeprint prototype. * user-regs.c: Remove _initialize_user_regs prototype. * utils.c: Remove _initialize_utils prototype. * v850-tdep.c: Remove _initialize_v850_tdep prototype. * valarith.c: Remove _initialize_valarith prototype. * valops.c: Remove _initialize_valops prototype. * valprint.c: Remove _initialize_valprint prototype. * value.c: Remove _initialize_values prototype. * varobj.c: Remove _initialize_varobj prototype. * vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype. * vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype. * vax-tdep.c: Remove _initialize_vax_tdep prototype. * windows-nat.c: Remove _initialize_windows_nat, _initialize_check_for_gdb_ini, and _initialize_loadable prototypes. * windows-tdep.c: Remove _initialize_windows_tdep prototype. * xcoffread.c: Remove _initialize_xcoffread prototype. * xml-support.c: Remove _initialize_xml_support prototype. * xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype. * xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat prototype. * xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep prototype. * xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.
2017-08-18Put selftests api into selftests namespaceYao Qi1-1/+1
This patch changes register_self_test to selftests::register_test, and run_self_tests to selftest::run_tests. gdb: 2017-08-18 Yao Qi <yao.qi@linaro.org> * selftest.c (register_self_test): Rename it to selftests::register_test. (run_self_tests): selftest::run_tests. * selftest.h: Update declarations. * selftest-arch.c (register_self_test_foreach_arch): Rename it to selftests::register_test_foreach_arch. * selftest-arch.h: Update declaration. * aarch64-tdep.c: Update. * arm-tdep.c: Likewise. * disasm-selftests.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2-frame.c: Likewise. * findvar.c: Likewise. * gdbarch-selftests.c: Likewise. * maint.c (maintenance_selftest): Likewise. * regcache.c: Likewise. * rust-exp.y: Likewise. * selftest-arch.c: Likewise. * unittests/environ-selftests.c: Likewise. * unittests/function-view-selftests.c: Likewise. * unittests/offset-type-selftests.c: Likewise. * unittests/optional-selftests.c: Likewise. * unittests/scoped_restore-selftests.c: Likewise. * utils-selftests.c: Likewise.
2017-07-26Add "maint check xml-descriptions" to test builtin xml target descriptionsYao Qi1-0/+18
Now, GDB is able to dynamically create i386-linux target descriptions from features, instead of using pre-generated target descriptions. These pre-generated target descriptions are no longer used by GDB (note that they are still used by GDBserver). This patch add a new maint command "maint check xml-descriptions" to test dynamically generated tdesc are identical to these generated from xml files. gdb: 2017-07-26 Yao Qi <yao.qi@linaro.org> * cli/cli-cmds.c (maintenancechecklist): New variable. * gdbcmd.h (maintenancechecklist): Declare it. * i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]: Call i386_linux_read_description with different masks. * maint.c (maintenance_check_command): New function. (_initialize_maint_cmds): Call add_prefix_cmd. * target-descriptions.c (tdesc_reg): override operator != and ==. (tdesc_type): Likewise. (tdesc_feature): Likewise. (target_desc): Likewise. [GDB_SELF_TEST] (selftests::record_xml_tdesc): New function. (maintenance_check_xml_descriptions): New function. (_initialize_target_descriptions) Add command "xml-descriptions". * target-descriptions.h (selftests::record_xml_tdesc): Declare. gdb/testsuite: 2017-07-26 Yao Qi <yao.qi@linaro.org> * gdb.gdb/unittest.exp: Invoke command "maintenance check xml-descriptions". gdb/doc: 2017-07-26 Yao Qi <yao.qi@linaro.org> * gdb.texinfo (Maintenance Commands): Document command "maint check xml-descriptions".
2017-02-02Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchyPedro Alves1-6/+3
This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-11-23gdb: Use C++11 std::chronoPedro Alves1-17/+14
This patch fixes a few problems with GDB's time handling. #1 - It avoids problems with gnulib's C++ namespace support On MinGW, the struct timeval that should be passed to gnulib's gettimeofday replacement is incompatible with libiberty's timeval_sub/timeval_add. That's because gnulib also replaces "struct timeval" with its own definition, while libiberty expects the system's. E.g., in code like this: gettimeofday (&prompt_ended, NULL); timeval_sub (&prompt_delta, &prompt_ended, &prompt_started); timeval_add (&prompt_for_continue_wait_time, &prompt_for_continue_wait_time, &prompt_delta); That's currently handled in gdb by not using gnulib's gettimeofday at all (see common/gdb_sys_time.h), but that #undef hack won't work with if/when we enable gnulib's C++ namespace support, because that mode adds compile time warnings for uses of ::gettimeofday, which are hard errors with -Werror. #2 - But there's an elephant in the room: gettimeofday is not monotonic... We're using it to: a) check how long functions take, for performance analysis b) compute when in the future to fire events in the event-loop c) print debug timestamps But that's exactly what gettimeofday is NOT meant for. Straight from the man page: ~~~ The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). ~~~ std::chrono (part of the C++11 standard library) has a monotonic clock exactly for such purposes (std::chrono::steady_clock). This commit switches to use that instead of gettimeofday, fixing all the issues mentioned above. gdb/ChangeLog: 2016-11-23 Pedro Alves <palves@redhat.com> * Makefile.in (SFILES): Add common/run-time-clock.c. (HFILES_NO_SRCDIR): Add common/run-time-clock.h. (COMMON_OBS): Add run-time-clock.o. * common/run-time-clock.c, common/run-time-clock.h: New files. * defs.h (struct timeval, print_transfer_performance): Delete declarations. * event-loop.c (struct gdb_timer) <when>: Now a std::chrono::steady_clock::time_point. (create_timer): use std::chrono::steady_clock instead of gettimeofday. Use new instead of malloc. (delete_timer): Use delete instead of xfree. (duration_cast_timeval): New. (update_wait_timeout): Use std::chrono::steady_clock instead of gettimeofday. * maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h> and "timeval-utils.h". (scoped_command_stats::~scoped_command_stats) (scoped_command_stats::scoped_command_stats): Use std::chrono::steady_clock instead of gettimeofday. Use user_cpu_time_clock instead of get_run_time. * maint.h: Include "run-time-clock.h" and <chrono>. (scoped_command_stats): <m_start_cpu_time>: Now a user_cpu_time_clock::time_point. <m_start_wall_time>: Now a std::chrono::steady_clock::time_point. * mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of "gdb_sys_time.h" and <sys/resource.h>. (rusage): Delete. (mi_execute_command): Use new instead of XNEW. (mi_load_progress): Use std::chrono::steady_clock instead of gettimeofday. (timestamp): Rewrite in terms of std::chrono::steady_clock, user_cpu_time_clock and system_cpu_time_clock. (timeval_diff): Delete. (print_diff): Adjust to use std::chrono::steady_clock, user_cpu_time_clock and system_cpu_time_clock. * mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead of "gdb_sys_time.h". (struct mi_timestamp): Change fields types to std::chrono::steady_clock::time_point, user_cpu_time_clock::time and system_cpu_time_clock::time_point, instead of struct timeval. * symfile.c: Include <chrono> instead of <time.h> and "gdb_sys_time.h". (struct time_range): New. (generic_load): Use std::chrono::steady_clock instead of gettimeofday. (print_transfer_performance): Replace timeval parameters with a std::chrono::steady_clock::duration parameter. Adjust. * utils.c: Include <chrono> instead of "timeval-utils.h", "gdb_sys_time.h", and <time.h>. (prompt_for_continue_wait_time): Now a std::chrono::steady_clock::duration. (defaulted_query, prompt_for_continue): Use std::chrono::steady_clock instead of gettimeofday/timeval_sub/timeval_add. (reset_prompt_for_continue_wait_time): Use std::chrono::steady_clock::duration instead of struct timeval. (get_prompt_for_continue_wait_time): Return a std::chrono::steady_clock::duration instead of struct timeval. (vfprintf_unfiltered): Use std::chrono::steady_clock instead of gettimeofday. Use std::string. Use '.' instead of ':'. * utils.h: Include <chrono>. (get_prompt_for_continue_wait_time): Return a std::chrono::steady_clock::duration instead of struct timeval. gdb/gdbserver/ChangeLog: 2016-11-23 Pedro Alves <palves@redhat.com> * debug.c: Include <chrono> instead of "gdb_sys_time.h". (debug_vprintf): Use std::chrono::steady_clock instead of gettimeofday. Use '.' instead of ':'. * tracepoint.c: Include <chrono> instead of "gdb_sys_time.h". (get_timestamp): Use std::chrono::steady_clock instead of gettimeofday.
2016-11-04Fix a few typosSimon Marchi1-1/+1
gdb/ChangeLog: * maint.c (scoped_command_stats::scoped_command_stats): Fix typo. * ppcnbsd-tdep.c (_initialize_ppcnbsd_tdep): Likewise. * ppcobsd-tdep.c (_initialize_ppcobsd_tdep): Likewise. * ui-out.c (ui_out_new): Likewise. * utils.c (init_page_info): Likewise. (reset_prompt_for_continue_wait_time): Likewise. * windows-nat.c (windows_init_thread_list): Likewise. * xtensa-tdep.c (call0_analyze_prologue): Likewise.
2016-10-28Fix gdb.base/maint.exp regressionsPedro Alves1-0/+6
This commit fixes these regressions: FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs FAIL: gdb.base/maint.exp: maint set per-command on caused by commit 1e3b796d58ac ("Change command stats reporting to use class"). gdb.log shows that the command stats are now printing garbage: (gdb) mt set per on Command execution time: -6.-419590 (cpu), 1467139648.-7706296840 (wall) Space used: 9809920 (-33276528 for this command) (gdb) FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs while there should have been no output at all. The stats printing is done from within the scoped_command_stats's destructor, depending on whether some flags in the object are set. The problem is simply that scoped_command_stats's ctor misses clearing those flags on some paths. Since scoped_command_stats objects are allocated on the stack, whether you'll see the regression simply depends on whatever happens to already be on the stack space the object occupies. gdb/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * maint.c (scoped_command_stats::scoped_command_stats): Clear m_space_enabled, m_time_enabled and m_symtab_enabled.
2016-10-21Change command stats reporting to use classTom Tromey1-80/+38
This removes make_command_stats_cleanup in favor of an RAII class. The patch is reasonably straightforward, but keeping the same semantics without excessive reindentation required splitting captured_main in two. 2016-10-21 Tom Tromey <tom@tromey.com> * maint.h (scoped_command_stats): New class. (make_command_stats_cleanup): Don't declare. * maint.c (struct cmd_stats): Remove. (~scoped_command_stats): Rename from report_command_stats. Now a destructor. (scoped_command_stats): Rename from make_command_stats_cleanup. Now a constructor. * main.c (captured_main_1): New function. Use scoped_command_stats. (captured_main): Call captured_main_1. * event-top.c (command_handler): Use scoped_command_stats.
2016-05-17Add self-test framework to gdbTom Tromey1-0/+18
I wanted to unit test the Rust lexer, so I added a simple unit testing command to gdb. The intent is that self tests will only be compiled into gdb in development mode. In release mode they simply won't exist. So, this exposes $development to C code as GDB_SELF_TEST. In development mode, test functions are registered with the self test module. A test function is just a function that does some checks, and throws an exception on failure. Then this adds a new "maint selftest" command which invokes the test functions, and a new dejagnu test case that invokes it. 2016-05-17 Tom Tromey <tom@tromey.com> * NEWS: Add "maint selftest" entry. * selftest.h: New file. * selftest.c: New file. * maint.c: Include selftest.h. (maintenance_selftest): New function. (_initialize_maint_cmds): Add "maint selftest" command. * configure.ac (GDB_SELF_TEST): Maybe define. * config.in, configure: Rebuild. * Makefile.in (SFILES): Add selftest.c. (COMMON_OBS): Add selftest.o. 2016-05-17 Tom Tromey <tom@tromey.com> * gdb.texinfo (Maintenance Commands): Document "maint selftest". 2016-05-17 Tom Tromey <tom@tromey.com> * gdb.gdb/unittest.exp: New file.
2016-05-07remove trivialy unused variablesTrevor Saunders1-1/+0
gdb/ChangeLog: 2016-05-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused variables. * aarch64-tdep.c (aarch64_skip_prologue): Likewise. (aarch64_scan_prologue): Likewise. (aarch64_prologue_prev_register): Likewise. (aarch64_dwarf2_prev_register): Likewise. (pass_in_v): Likewise. (aarch64_push_dummy_call): Likewise. (aarch64_breakpoint_from_pc): Likewise. (aarch64_return_in_memory): Likewise. (aarch64_return_value): Likewise. (aarch64_displaced_step_b_cond): Likewise. (aarch64_displaced_step_cb): Likewise. (aarch64_displaced_step_tb): Likewise. (aarch64_gdbarch_init): Likewise. (aarch64_process_record): Likewise. * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise. * alpha-tdep.c (_initialize_alpha_tdep): Likewise. * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise. * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise. * amd64-tdep.c (fixup_riprel): Likewise. * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise. (amd64_windows_frame_decode_insns): Likewise. (amd64_windows_frame_cache): Likewise. (amd64_windows_frame_prev_register): Likewise. (amd64_windows_frame_this_id): Likewise. (amd64_windows_init_abi): Likewise. * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise. * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise. (arm_epilogue_frame_prev_register): Likewise. (arm_record_vdata_transfer_insn): Likewise. (arm_record_exreg_ld_st_insn): Likewise. * auto-load.c (execute_script_contents): Likewise. (print_scripts): Likewise. * avr-tdep.c (avr_frame_prev_register): Likewise. (avr_push_dummy_call): Likewise. * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise. * break-catch-throw.c (fetch_probe_arguments): Likewise. * breakpoint.c (breakpoint_xfer_memory): Likewise. (breakpoint_init_inferior): Likewise. (breakpoint_inserted_here_p): Likewise. (software_breakpoint_inserted_here_p): Likewise. (hardware_breakpoint_inserted_here_p): Likewise. (bpstat_what): Likewise. (break_range_command): Likewise. (save_breakpoints): Likewise. * coffread.c (coff_symfile_read): Likewise. * cris-tdep.c (cris_push_dummy_call): Likewise. (cris_scan_prologue): Likewise. (cris_register_size): Likewise. (_initialize_cris_tdep): Likewise. * d-exp.y: Likewise. * dbxread.c (dbx_read_symtab): Likewise. (process_one_symbol): Likewise. (coffstab_build_psymtabs): Likewise. (elfstab_build_psymtabs): Likewise. * dicos-tdep.c (dicos_init_abi): Likewise. * disasm.c (do_mixed_source_and_assembly): Likewise. (gdb_disassembly): Likewise. * dtrace-probe.c (dtrace_process_dof): Likewise. * dwarf2read.c (error_check_comp_unit_head): Likewise. (build_type_psymtabs_1): Likewise. (skip_one_die): Likewise. (process_imported_unit_die): Likewise. (dwarf2_physname): Likewise. (read_file_scope): Likewise. (setup_type_unit_groups): Likewise. (create_dwo_cu_reader): Likewise. (create_dwo_cu): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (lookup_dwo_unit_in_dwp): Likewise. (free_dwo_file): Likewise. (check_producer): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (read_unsigned_leb128): Likewise. (read_signed_leb128): Likewise. (dwarf2_const_value): Likewise. (follow_die_sig_1): Likewise. (dwarf_decode_macro_bytes): Likewise. * extension.c (restore_active_ext_lang): Likewise. * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise. * ft32-tdep.c (ft32_analyze_prologue): Likewise. * gdbtypes.c (lookup_typename): Likewise. (resolve_dynamic_range): Likewise. (check_typedef): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Likewise. (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa32_push_dummy_call): Likewise. (hppa_frame_this_id): Likewise. (_initialize_hppa_tdep): Likewise. * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise. * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise. * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise. * i386-tdep.c (i386_bnd_type): Likewise. (i386_gdbarch_init): Likewise. (i386_mpx_bd_base): Likewise. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise. * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise. * ia64-tdep.c (examine_prologue): Likewise. (ia64_frame_cache): Likewise. (ia64_push_dummy_call): Likewise. * infcmd.c (finish_command_fsm_async_reply_reason): Likewise. (default_print_one_register_info): Likewise. * infrun.c (infrun_thread_ptid_changed): Likewise. (thread_still_needs_step_over): Likewise. (stop_all_threads): Likewise. (restart_threads): Likewise. (keep_going_stepped_thread): Likewise. * iq2000-tdep.c (iq2000_scan_prologue): Likewise. * language.c (language_init_primitive_type_symbols): Likewise. * linespec.c (add_sal_to_sals): Likewise. * linux-nat.c (status_callback): Likewise. (kill_unfollowed_fork_children): Likewise. (linux_nat_kill): Likewise. * linux-tdep.c (linux_fill_prpsinfo): Likewise. * linux-thread-db.c (thread_db_notice_clone): Likewise. (record_thread): Likewise. * location.c (string_to_event_location_basic): Likewise. * m32c-tdep.c (m32c_prev_register): Likewise. * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise. * m32r-tdep.c (decode_prologue): Likewise. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise. * machoread.c (macho_symtab_read): Likewise. (macho_symfile_read): Likewise. (macho_symfile_offsets): Likewise. * maint.c (set_per_command_cmd): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_variables): Likewise. * mi/mi-main.c (mi_cmd_exec_run): Likewise. (output_register): Likewise. (mi_cmd_execute): Likewise. (mi_cmd_trace_define_variable): Likewise. (print_variable_or_computed): Likewise. * minsyms.c (prim_record_minimal_symbol_full): Likewise. * mn10300-tdep.c (mn10300_frame_prev_register): Likewise. * msp430-tdep.c (msp430_pseudo_register_write): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nios2-tdep.c (nios2_analyze_prologue): Likewise. (nios2_push_dummy_call): Likewise. (nios2_frame_unwind_cache): Likewise. (nios2_stub_frame_cache): Likewise. (nios2_stub_frame_sniffer): Likewise. (nios2_gdbarch_init): Likewise. * ppc-ravenscar-thread.c: Likewise. * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise. * python/py-evts.c (add_new_registry): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. (bpfinishpy_detect_out_scope_cb): Likewise. * python/py-framefilter.c (py_print_value): Likewise. * python/py-inferior.c (infpy_write_memory): Likewise. * python/py-infevents.c (create_inferior_call_event_object): Likewise. * python/py-infthread.c (thpy_get_ptid): Likewise. * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise. (ltpy_get_all_source_lines): Likewise. (ltpy_is_valid): Likewise. (ltpy_iternext): Likewise. * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise. * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise. (unwind_infopy_str): Likewise. * python/py-varobj.c (py_varobj_get_iterator): Likewise. * ravenscar-thread.c (ravenscar_inferior_created): Likewise. * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise. * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise. (s390_frame_prev_register): Likewise. (s390_dwarf2_frame_init_reg): Likewise. (s390_record_vr): Likewise. (s390_process_record): Likewise. * score-tdep.c (score_push_dummy_call): Likewise. (score3_analyze_prologue): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. * sh64-tdep.c (sh64_analyze_prologue): Likewise. (sh64_push_dummy_call): Likewise. (sh64_extract_return_value): Likewise. (sh64_do_fp_register): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Likewise. * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise. (darwin_solib_read_all_image_info_addr): Likewise. * solib-dsbt.c (enable_break): Likewise. * solib-frv.c (enable_break2): Likewise. (frv_fdpic_find_canonical_descriptor): Likewise. * solib-svr4.c (svr4_handle_solib_event): Likewise. * sparc-tdep.c (sparc_skip_stack_check): Likewise. * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise. * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stack.c (read_frame_local): Likewise. * symfile.c (symbol_file_add_separate): Likewise. (remove_symbol_file_command): Likewise. * symmisc.c (maintenance_print_one_line_table): Likewise. * symtab.c (symbol_cache_flush): Likewise. (basic_lookup_transparent_type): Likewise. (sort_search_symbols_remove_dups): Likewise. * target.c (target_memory_map): Likewise. (target_detach): Likewise. (target_resume): Likewise. (acquire_fileio_fd): Likewise. (target_store_registers): Likewise. * thread.c (print_thread_info_1): Likewise. * tic6x-tdep.c (tic6x_analyze_prologue): Likewise. * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. (tilegx_analyze_prologue): Likewise. (tilegx_stack_frame_destroyed_p): Likewise. (tilegx_frame_cache): Likewise. * tracefile.c (trace_save): Likewise. * tracepoint.c (encode_actions_and_make_cleanup): Likewise. (start_tracing): Likewise. (print_one_static_tracepoint_marker): Likewise. * tui/tui.c (tui_enable): Likewise. * valops.c (value_struct_elt_bitpos): Likewise. (find_overload_match): Likewise. (find_oload_champ): Likewise. * value.c (value_contents_copy_raw): Likewise. * windows-tdep.c (windows_get_tlb_type): Likewise. * x86-linux-nat.c (x86_linux_enable_btrace): Likewise. * xcoffread.c (record_minimal_symbol): Likewise. (scan_xcoff_symtab): Likewise. * xtensa-tdep.c (execute_code): Likewise. (xtensa_gdbarch_init): Likewise. (_initialize_xtensa_tdep): Likewise.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-09-25Add some more casts (2/2)Simon Marchi1-1/+1
See previous patch's description. gdb/ChangeLog: * macrocmd.c (print_macro_callback): Add cast(s). * macrotab.c (macro_bcache_str): Likewise. (new_macro_definition): Likewise. * main.c (captured_main): Likewise. * maint.c (print_bfd_section_info): Likewise. * mdebugread.c (mdebug_build_psymtabs): Likewise. (basic_type): Likewise. * memattr.c (mem_region_cmp): Likewise. * memory-map.c (memory_map_start_memory): Likewise. (memory_map_end_memory): Likewise. (memory_map_start_property): Likewise. (memory_map_end_property): Likewise. (clear_result): Likewise. * memrange.c (compare_mem_ranges): Likewise. * mep-tdep.c (mep_analyze_frame_prologue): Likewise. * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Likewise. * mi/mi-console.c (mi_console_file_delete): Likewise. (mi_console_file_fputs): Likewise. (mi_console_raw_packet): Likewise. (mi_console_file_flush): Likewise. (mi_console_set_raw): Likewise. * mi/mi-interp.c (mi_interpreter_resume): Likewise. (mi_new_thread): Likewise. (mi_thread_exit): Likewise. (mi_record_changed): Likewise. (mi_inferior_added): Likewise. (mi_inferior_appeared): Likewise. (mi_inferior_exit): Likewise. (mi_inferior_removed): Likewise. (mi_interp_data): Likewise. (mi_on_normal_stop): Likewise. (mi_traceframe_changed): Likewise. (mi_tsv_created): Likewise. (mi_tsv_deleted): Likewise. (mi_tsv_modified): Likewise. (mi_breakpoint_created): Likewise. (mi_breakpoint_deleted): Likewise. (mi_breakpoint_modified): Likewise. (mi_output_running_pid): Likewise. (mi_inferior_count): Likewise. (mi_solib_loaded): Likewise. (mi_solib_unloaded): Likewise. (mi_command_param_changed): Likewise. (mi_memory_changed): Likewise. (report_initial_inferior): Likewise. (mi_ui_out): Likewise. (mi_set_logging): Likewise. * mi/mi-main.c (collect_cores): Likewise. (print_one_inferior): Likewise. (free_vector_of_ints): Likewise. (free_splay_tree): Likewise. (mi_execute_command): Likewise. * mi/mi-out.c (mi_table_body): Likewise. (mi_table_end): Likewise. (mi_table_header): Likewise. (mi_begin): Likewise. (mi_end): Likewise. (mi_field_int): Likewise. (mi_field_string): Likewise. (mi_field_fmt): Likewise. (mi_flush): Likewise. (mi_redirect): Likewise. (field_separator): Likewise. (mi_open): Likewise. (mi_close): Likewise. (mi_out_buffered): Likewise. (mi_out_rewind): Likewise. (mi_out_put): Likewise. (mi_version): Likewise. (mi_out_data_dtor): Likewise. * mi/mi-parse.c (mi_parse_cleanup): Likewise. * microblaze-tdep.c (microblaze_frame_cache): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. (lzma_close): Likewise. (lzma_stat): Likewise. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * mips-sde-tdep.c (mips_sde_frame_cache): Likewise. (mips_sde_elf_osabi_sniff_abi_tag_sections): Likewise. * mips-tdep.c (mips_insn16_frame_cache): Likewise. (mips_micro_frame_cache): Likewise. (mips_insn32_frame_cache): Likewise. (mips_stub_frame_cache): Likewise. (gdb_print_insn_mips): Likewise. (value_of_mips_user_reg): Likewise. (mips_gdbarch_init): Likewise. * mips64obsd-tdep.c (mips64obsd_supply_gregset): Likewise. * mipsnbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. * mn10300-linux-tdep.c (am33_supply_fpregset_method): Likewise. (am33_collect_gregset_method): Likewise. (am33_collect_fpregset_method): Likewise. * mn10300-tdep.c (mn10300_analyze_frame_prologue): Likewise. * moxie-tdep.c (moxie_frame_cache): Likewise. * msp430-tdep.c (msp430_get_opcode_byte): Likewise. (msp430_analyze_frame_prologue): Likewise. * mt-tdep.c (mt_frame_unwind_cache): Likewise. * nios2-linux-tdep.c (nios2_supply_gregset): Likewise. (nios2_collect_gregset): Likewise. * nios2-tdep.c (nios2_frame_unwind_cache): Likewise. (nios2_stub_frame_cache): Likewise. * objc-lang.c (find_methods): Likewise. * objfiles.c (objfiles_pspace_data_cleanup): Likewise. (get_objfile_pspace_data): Likewise. (get_objfile_bfd_data): Likewise. (objfile_bfd_data_free): Likewise. (add_to_objfile_sections): Likewise. (do_free_objfile_cleanup): Likewise. (resume_section_map_updates_cleanup): Likewise. * opencl-lang.c (builtin_opencl_type): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * osdata.c (osdata_start_osdata): Likewise. (osdata_start_item): Likewise. (osdata_start_column): Likewise. (osdata_end_column): Likewise. (clear_parsing_data): Likewise. (osdata_free_cleanup): Likewise. * parse.c (type_stack_cleanup): Likewise. (exp_uses_objfile_iter): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppu2spu_prev_arch): Likewise. (ppu2spu_this_id): Likewise. (ppu2spu_prev_register): Likewise. (ppu2spu_unwind_register): Likewise. (ppu2spu_sniffer): Likewise. (ppu2spu_dealloc_cache): Likewise. (ppc_linux_init_abi): Likewise. * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise. * progspace.c (restore_program_space): Likewise. * psymtab.c (find_pc_sect_psymtab): Likewise. (compare_psymbols): Likewise. (psymbol_bcache_full): Likewise. (allocate_psymtab): Likewise. (discard_psymtabs_upto): Likewise. * python/py-block.c (set_block): Likewise. (del_objfile_blocks): Likewise. * python/py-breakpoint.c (build_bp_list): Likewise. * python/py-inferior.c (inferior_to_inferior_object): Likewise. (build_inferior_list): Likewise. (py_free_inferior): Likewise. * python/py-objfile.c (py_free_objfile): Likewise. (objfile_to_objfile_object): Likewise. * python/py-prettyprint.c (py_restore_tstate): Likewise. * python/py-progspace.c (py_free_pspace): Likewise. (pspace_to_pspace_object): Likewise. * python/py-symbol.c (set_symbol): Likewise. (del_objfile_symbols): Likewise. * python/py-symtab.c (set_sal): Likewise. (set_symtab): Likewise. (del_objfile_symtab): Likewise. (del_objfile_sal): Likewise. * python/py-type.c (save_objfile_types): Likewise. (set_type): Likewise. * python/py-unwind.c (pyuw_prev_register): Likewise. (pyuw_on_new_gdbarch): Likewise. * python/py-utils.c (py_decref): Likewise. (py_xdecref): Likewise. (gdb_py_generic_dict): Likewise. * python/py-xmethods.c (gdbpy_free_xmethod_worker_data): Likewise. (gdbpy_clone_xmethod_worker_data): Likewise. (gdbpy_get_xmethod_arg_types): Likewise. (gdbpy_get_xmethod_result_type): Likewise. (gdbpy_invoke_xmethod): Likewise. * python/python.c (gdbpy_apply_type_printers): Likewise. (gdbpy_free_type_printers): Likewise. * record-btrace.c (record_btrace_disable_callback): Likewise. (bfcache_hash): Likewise. (bfcache_eq): Likewise. (btrace_get_frame_function): Likewise. (record_btrace_frame_unwind_stop_reason): Likewise. (record_btrace_frame_this_id): Likewise. (record_btrace_frame_prev_register): Likewise. (record_btrace_frame_dealloc_cache): Likewise. * record-full.c (record_full_message_wrapper): Likewise. (record_full_save_cleanups): Likewise. * regcache.c (regcache_descr): Likewise. (do_regcache_xfree): Likewise. (do_regcache_invalidate): Likewise. (do_cooked_read): Likewise. (regcache_transfer_regset): Likewise. * reggroups.c (reggroup_add): Likewise. (reggroup_next): Likewise. (reggroup_prev): Likewise. * remote-fileio.c (do_remote_fileio_request): Likewise. * remote-notif.c (remote_async_get_pending_events_handler): Likewise. (do_notif_event_xfree): Likewise. * remote.c (get_remote_arch_state): Likewise. (remote_pspace_data_cleanup): Likewise. (get_remote_exec_file): Likewise. (set_pspace_remote_exec_file): Likewise. (compare_pnums): Likewise. (clear_threads_listing_context): Likewise. (remote_newthread_step): Likewise. (start_thread): Likewise. (end_thread): Likewise. (remove_child_of_pending_fork): Likewise. (remove_stop_reply_for_inferior): Likewise. (remove_stop_reply_of_remote_state): Likewise. (remote_notif_remove_once_on_match): Likewise. (stop_reply_match_ptid_and_ws): Likewise. (kill_child_of_pending_fork): Likewise. (register_remote_g_packet_guess): Likewise. (remote_read_description_p): Likewise. (remote_read_description): Likewise. (free_actions_list_cleanup_wrapper): Likewise. (remote_async_serial_handler): Likewise. * rl78-tdep.c (rl78_get_opcode_byte): Likewise. (rl78_analyze_frame_prologue): Likewise. * rs6000-tdep.c (ppc_supply_gregset): Likewise. (ppc_supply_fpregset): Likewise. (ppc_supply_vsxregset): Likewise. (ppc_supply_vrregset): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (e500_move_ev_register): Likewise. (do_regcache_raw_write): Likewise. (rs6000_frame_cache): Likewise. (rs6000_epilogue_frame_cache): Likewise. (rs6000_gdbarch_init): Likewise. * rx-tdep.c (rx_get_opcode_byte): Likewise. (rx_analyze_frame_prologue): Likewise. (rx_frame_type): Likewise. (rx_frame_sniffer_common): Likewise. * s390-linux-tdep.c (s390_check_for_saved): Likewise. (s390_frame_unwind_cache): Likewise. (s390_stub_frame_unwind_cache): Likewise. (s390_sigtramp_frame_unwind_cache): Likewise. * score-tdep.c (score_make_prologue_cache): Likewise. * sentinel-frame.c (sentinel_frame_prev_register): Likewise. (sentinel_frame_prev_arch): Likewise. * ser-base.c (fd_event): Likewise. (push_event): Likewise. (ser_base_write): Likewise. * ser-pipe.c (pipe_close): Likewise. * serial.c (serial_write): Likewise. * sh-tdep.c (sh_frame_cache): Likewise. (sh_stub_this_id): Likewise. * sh64-tdep.c (sh64_frame_cache): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (library_list_start_list): Likewise. (solib_aix_free_library_list): Likewise. * solib-darwin.c (get_darwin_info): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-spu.c (append_ocl_sos): Likewise. * solib-svr4.c (svr4_pspace_data_cleanup): Likewise. (get_svr4_info): Likewise. (library_list_start_library): Likewise. (svr4_library_list_start_list): Likewise. (hash_probe_and_action): Likewise. (equal_probe_and_action): Likewise. (svr4_update_solib_event_breakpoint): Likewise. (set_solib_svr4_fetch_link_map_offsets): Likewise. (svr4_fetch_link_map_offsets): Likewise. (svr4_have_link_map_offsets): Likewise. * solib-target.c (library_list_start_segment): Likewise. (library_list_start_section): Likewise. (library_list_start_library): Likewise. (library_list_end_library): Likewise. (library_list_start_list): Likewise. (solib_target_free_library_list): Likewise. * solib.c (solib_ops): Likewise. (set_solib_ops): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise. * sparc-tdep.c (sparc_frame_cache): Likewise. (sparc32_frame_cache): Likewise. (sparc32_supply_gregset): Likewise. (sparc32_collect_gregset): Likewise. (sparc32_supply_fpregset): Likewise. (sparc32_collect_fpregset): Likewise. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise. * sparc64-tdep.c (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_cache): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_cache): Likewise. * sparc64obsd-tdep.c (sparc64obsd_frame_cache): Likewise. (sparc64obsd_trapframe_cache): Likewise. * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_cache): Likewise. * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_cache): Likewise. * spu-multiarch.c (spu_gdbarch): Likewise. * spu-tdep.c (spu_frame_unwind_cache): Likewise. (spu2ppu_prev_arch): Likewise. (spu2ppu_this_id): Likewise. (spu2ppu_prev_register): Likewise. (spu2ppu_dealloc_cache): Likewise. (spu_dis_asm_print_address): Likewise. (gdb_print_insn_spu): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (rs6000_builtin_type): Likewise. * stack.c (do_print_variable_and_value): Likewise. * stap-probe.c (get_stap_base_address_1): Likewise. * symfile-debug.c (debug_qf_has_symbols): Likewise. (debug_qf_find_last_source_symtab): Likewise. (debug_qf_forget_cached_source_info): Likewise. (debug_qf_map_symtabs_matching_filename): Likewise. (debug_qf_lookup_symbol): Likewise. (debug_qf_print_stats): Likewise. (debug_qf_dump): Likewise. (debug_qf_relocate): Likewise. (debug_qf_expand_symtabs_for_function): Likewise. (debug_qf_expand_all_symtabs): Likewise. (debug_qf_expand_symtabs_with_fullname): Likewise. (debug_qf_map_matching_symbols): Likewise. (debug_qf_expand_symtabs_matching): Likewise. (debug_qf_find_pc_sect_compunit_symtab): Likewise. (debug_qf_map_symbol_filenames): Likewise. (debug_sym_get_probes): Likewise. (debug_sym_new_init): Likewise. (debug_sym_init): Likewise. (debug_sym_read): Likewise. (debug_sym_read_psymbols): Likewise. (debug_sym_finish): Likewise. (debug_sym_offsets): Likewise. (debug_sym_read_linetable): Likewise. (debug_sym_relocate): Likewise. (uninstall_symfile_debug_logging): Likewise. * symfile-mem.c (symbol_file_add_from_memory_wrapper): Likewise. * symfile.c (place_section): Likewise. (add_section_size_callback): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (clear_memory_write_data): Likewise. (allocate_symtab): Likewise. * symmisc.c (maintenance_expand_file_matcher): Likewise. * symtab.c (lookup_symtab_callback): Likewise. (hash_demangled_name_entry): Likewise. (eq_demangled_name_entry): Likewise. (get_symbol_cache): Likewise. (symbol_cache_cleanup): Likewise. (set_symbol_cache_size): Likewise. (symbol_cache_flush): Likewise. (maintenance_print_symbol_cache): Likewise. (maintenance_print_symbol_cache_statistics): Likewise. (delete_filename_seen_cache): Likewise. (output_partial_symbol_filename): Likewise. (search_symbols_file_matches): Likewise. (search_symbols_name_matches): Likewise. (do_free_completion_list): Likewise. (maybe_add_partial_symtab_filename): Likewise. (get_main_info): Likewise. (main_info_cleanup): Likewise. * target-dcache.c (target_dcache_cleanup): Likewise. (target_dcache_init_p): Likewise. (target_dcache_invalidate): Likewise. (target_dcache_get): Likewise. (target_dcache_get_or_init): Likewise. * target-descriptions.c (target_find_description): Likewise. (tdesc_find_type): Likewise. (tdesc_data_cleanup): Likewise. (tdesc_find_arch_register): Likewise. (tdesc_register_name): Likewise. (tdesc_register_type): Likewise. (tdesc_register_reggroup_p): Likewise. (set_tdesc_pseudo_register_name): Likewise. (set_tdesc_pseudo_register_type): Likewise. (set_tdesc_pseudo_register_reggroup_p): Likewise. (tdesc_use_registers): Likewise. (free_target_description): Likewise. * target-memory.c (compare_block_starting_address): Likewise. (cleanup_request_data): Likewise. (cleanup_write_requests_vector): Likewise. * target.c (open_target): Likewise. (cleanup_restore_target_terminal): Likewise. (free_memory_read_result_vector): Likewise. * thread.c (disable_thread_stack_temporaries): Likewise. (finish_thread_state_cleanup): Likewise. (do_restore_current_thread_cleanup): Likewise. (restore_current_thread_cleanup_dtor): Likewise. (set_thread_refcount): Likewise. (tp_array_compar): Likewise. (do_captured_thread_select): Likewise. * tic6x-tdep.c (tic6x_frame_unwind_cache): Likewise. (tic6x_stub_this_id): Likewise. * tilegx-tdep.c (tilegx_frame_cache): Likewise. * top.c (do_restore_instream_cleanup): Likewise. (gdb_readline_wrapper_cleanup): Likewise. (kill_or_detach): Likewise. (print_inferior_quit_action): Likewise. * tracefile-tfile.c (match_blocktype): Likewise. (build_traceframe_info): Likewise. * tracefile.c (trace_file_writer_xfree): Likewise. * tracepoint.c (memrange_cmp): Likewise. (do_collect_symbol): Likewise. (do_clear_collection_list): Likewise. (do_restore_current_traceframe_cleanup): Likewise. (restore_current_traceframe_cleanup_dtor): Likewise. (free_current_marker): Likewise. (traceframe_info_start_memory): Likewise. (traceframe_info_start_tvar): Likewise. (free_result): Likewise. * tramp-frame.c (tramp_frame_cache): Likewise. * tui/tui-file.c (tui_file_delete): Likewise. (tui_fileopen): Likewise. (tui_sfileopen): Likewise. (tui_file_isatty): Likewise. (tui_file_rewind): Likewise. (tui_file_put): Likewise. (tui_file_fputs): Likewise. (tui_file_get_strbuf): Likewise. (tui_file_adjust_strbuf): Likewise. (tui_file_flush): Likewise. * tui/tui-layout.c (make_command_window): Likewise. (make_data_window): Likewise. (show_source_disasm_command): Likewise. (show_data): Likewise. (make_source_or_disasm_window): Likewise. (show_source_or_disasm_and_command): Likewise. * tui/tui-out.c (tui_field_int): Likewise. (tui_field_string): Likewise. (tui_field_fmt): Likewise. (tui_text): Likewise. * typeprint.c (hash_typedef_field): Likewise. (eq_typedef_field): Likewise. (do_free_typedef_hash): Likewise. (copy_typedef_hash_element): Likewise. (do_free_global_table): Likewise. (find_global_typedef): Likewise. (find_typedef_in_hash): Likewise. * ui-file.c (ui_file_write_for_put): Likewise. (do_ui_file_xstrdup): Likewise. (mem_file_delete): Likewise. (mem_file_rewind): Likewise. (mem_file_put): Likewise. (mem_file_write): Likewise. (stdio_file_delete): Likewise. (stdio_file_flush): Likewise. (stdio_file_read): Likewise. (stdio_file_write): Likewise. (stdio_file_write_async_safe): Likewise. (stdio_file_fputs): Likewise. (stdio_file_isatty): Likewise. (stdio_file_fseek): Likewise. (tee_file_delete): Likewise. (tee_file_flush): Likewise. (tee_file_write): Likewise. (tee_file_fputs): Likewise. (tee_file_isatty): Likewise. * ui-out.c (do_cleanup_table_end): Likewise. (do_cleanup_end): Likewise. * user-regs.c (user_reg_add): Likewise. (user_reg_map_name_to_regnum): Likewise. (usernum_to_user_reg): Likewise. (maintenance_print_user_registers): Likewise. * utils.c (do_bfd_close_cleanup): Likewise. (do_fclose_cleanup): Likewise. (do_obstack_free): Likewise. (do_ui_file_delete): Likewise. (do_ui_out_redirect_pop): Likewise. (do_free_section_addr_info): Likewise. (restore_integer): Likewise. (do_unpush_target): Likewise. (do_htab_delete_cleanup): Likewise. (do_restore_ui_file): Likewise. (do_value_free): Likewise. (do_free_so): Likewise. (free_current_contents): Likewise. (do_regfree_cleanup): Likewise. (core_addr_hash): Likewise. (core_addr_eq): Likewise. (do_free_char_ptr_vec): Likewise. * v850-tdep.c (v850_frame_cache): Likewise. * varobj.c (do_free_variable_cleanup): Likewise. * vax-tdep.c (vax_supply_gregset): Likewise. (vax_frame_cache): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_cache): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_values_cleanup): Likewise. (gdb_xml_start_element): Likewise. (gdb_xml_start_element_wrapper): Likewise. (gdb_xml_end_element): Likewise. (gdb_xml_end_element_wrapper): Likewise. (gdb_xml_cleanup): Likewise. (gdb_xml_fetch_external_entity): Likewise. (gdb_xml_parse_attr_enum): Likewise. (xinclude_start_include): Likewise. (xinclude_end_include): Likewise. (xml_xinclude_default): Likewise. (xml_xinclude_start_doctype): Likewise. (xml_xinclude_end_doctype): Likewise. (xml_xinclude_cleanup): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (free_syscalls_info): Likewise. (syscall_start_syscall): Likewise. * xml-tdesc.c (tdesc_end_arch): Likewise. (tdesc_end_osabi): Likewise. (tdesc_end_compatible): Likewise. (tdesc_start_target): Likewise. (tdesc_start_feature): Likewise. (tdesc_start_reg): Likewise. (tdesc_start_union): Likewise. (tdesc_start_struct): Likewise. (tdesc_start_flags): Likewise. (tdesc_start_field): Likewise. (tdesc_start_vector): Likewise. (fetch_available_features_from_target): Likewise. * xstormy16-tdep.c (xstormy16_frame_cache): Likewise. * xtensa-tdep.c (xtensa_supply_gregset): Likewise. (xtensa_frame_cache): Likewise. (xtensa_frame_prev_register): Likewise. (xtensa_extract_return_value): Likewise.
2015-08-24Prepare for gnulib updatePedro Alves1-1/+1
After the last gnulib import (Dec 2012), gnulib upstream started replacing mingw's 'struct timeval' with a version with 64-bit time_t, for POSIX compliance: commit f8e84098084b3b53bc6943a5542af1f607ffd477 Author: Bruno Haible <bruno@clisp.org> Date: Sat Jan 28 18:12:10 2012 +0100 sys_time: Override 'struct timeval' on some native Windows platforms. See: https://lists.gnu.org/archive/html/bug-gnulib/2012-01/msg00372.html However, that results in conflicts with native Winsock2's 'select': select()'s argument http://sourceforge.net/p/mingw-w64/mailman/message/29610438/ ... and libiberty's timeval-utils.h timeval_add/timeval_sub, at the least. We don't really need the POSIX compliance, so this patch prepares us to simply not use gnulib's 'struct timeval' replacement once a more recent gnulib is imported, thus preserving the current behavior, by adding a sys/time.h wrapper header that undefs gnulib's replacements, and including that everywhere instead. The SIZE -> OSIZE change is necessary because newer gnulib's sys/time.h also includes windows.h/winsock2.h, which defines a conflicting SIZE symbol. Cross build-tested mingw-w64 32-bit and 64-bit. Regtested on x86_64 Fedora 20. gdb/ChangeLog: 2015-08-24 Pedro Alves <palves@redhat.com> * Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h. * common/gdb_sys_time.h: New file. * event-loop.c: Include gdb_sys_time.h instead of sys/time.h. * gdb_select.h: Likewise. * gdb_usleep.c: Likewise. * maint.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.h: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote.c: Likewise. * ser-base.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * symfile.c: Likewise. * symfile.c: Likewise. Rename OSIZE to SIZE throughout. * target-memory.c: Include gdb_sys_time.h instead of sys/time.h. * utils.c: Likewise. gdb/gdbserver/ChangeLog: 2015-08-24 Pedro Alves <palves@redhat.com> * debug.c: Include gdb_sys_time.h instead of sys/time.h. * event-loop.c: Likewise. * remote-utils.c: Likewise. * tracepoint.c: Likewise.
2015-02-27Add extern "C" to declarations of C symbolsPedro Alves1-5/+5
These symbols are defined in C code, so in C++ mode we need to use extern "C" to declare them. As extern "C" can't be used inside a function's scope, we move the declarations to the global scope at the same time. gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * cli-out.c (_rl_erase_entire_line): Move declaration out of cli_mld_erase_entire_line, and make it extern "C". * common/common-defs.h (EXTERN_C): New. * completer.c (_rl_completion_prefix_display_length) (_rl_print_completions_horizontally, QSFUNC): Move declarations out of gdb_display_match_list_1. (_rl_qsort_string_compare): Move declaration out of gdb_display_match_list_1, and make it extern "C". * defs.h (re_comp): Use EXTERN_C. * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper, and make it extern "C". (monstartup): Move declaration out of maintenance_set_profile_cmd, and make it extern "C". (main): Move declaration out of maintenance_set_profile_cmd. * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use EXTERN_C.
2015-01-11PR gdb/15830Doug Evans1-35/+11
gdb/ChangeLog: PR gdb/15830 * NEWS: The "maint demangle" command is renamed as "demangle". * demangle.c: #include cli/cli-utils.h, language.h. (demangle_command): New function. (_initialize_demangle): Add new command "demangle". * maint.c (maintenance_demangle): Stub out. (_initialize_maint_cmds): Update help text for "maint demangle", and mark as deprecated. gdb/doc/ChangeLog: * gdb.texinfo (Debugging C Plus Plus): Mention "demangle". (Symbols): Ditto. (Maintenance Commands): Delete docs for "maint demangle". gdb/testsuite/ChangeLog: * gdb.base/maint.exp: Remove references to "maint demangle". * gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle". Add tests for explicitly specifying language to demangle. * gdb.dlang/demangle.exp: Ditto.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-11-20Split struct symtab into two: struct symtab and compunit_symtab.Doug Evans1-20/+20
Currently "symtabs" in gdb are stored as a single linked list of struct symtab that contains both symbol symtabs (the blockvectors) and file symtabs (the linetables). This has led to confusion, bugs, and performance issues. This patch is conceptually very simple: split struct symtab into two pieces: one part containing things common across the entire compilation unit, and one part containing things specific to each source file. Example. For the case of a program built out of these files: foo.c foo1.h foo2.h bar.c foo1.h bar.h Today we have a single list of struct symtabs: objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL where "->" means the "next" pointer in struct symtab. With this patch, that turns into: objfile -> foo.c(cu) -> bar.c(cu) -> NULL | | v v foo.c bar.c | | v v foo1.h foo1.h | | v v foo2.h bar.h | | v v NULL NULL where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects, and the files foo.c, etc. are struct symtab objects. So now, for example, when we want to iterate over all blockvectors we can now just iterate over the compunit_symtab list. Plus a lot of the data that was either unused or replicated for each symtab in a compilation unit now lives in struct compunit_symtab. E.g., the objfile pointer, the producer string, etc. I thought of moving "language" out of struct symtab but there is logic to try to compute the language based on previously seen files, and I think that's best left as is for now. With my standard monster benchmark with -readnow (which I can't actually do, but based on my calculations), whereas today the list requires 77MB to store all the struct symtabs, it now only requires 37MB. A modest space savings given the gigabytes needed for all the debug info, etc. Still, it's nice. Plus, whereas today we create a copy of dirname for each source file symtab in a compilation unit, we now only create one for the compunit. So this patch is basically just a data structure reorg, I don't expect significant performance improvements from it. Notes: 1) A followup patch can do a similar split for struct partial_symtab. I have left that until after I get the changes I want in to better utilize .gdb_index (it may affect how we do partial syms). 2) Another followup patch *could* rename struct symtab. The term "symtab" is ambiguous and has been a source of confusion. In this patch I'm leaving it alone, calling it the "historical" name of "filetabs", which is what they are now: just the file-name + line-table. gdb/ChangeLog: Split struct symtab into two: struct symtab and compunit_symtab. * amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit. * block.c (blockvector_for_pc_sect): Change "struct symtab *" argument to "struct compunit_symtab *". All callers updated. (set_block_compunit_symtab): Renamed from set_block_symtab. Change "struct symtab *" argument to "struct compunit_symtab *". All callers updated. (get_block_compunit_symtab): Renamed from get_block_symtab. Change result to "struct compunit_symtab *". All callers updated. (find_iterator_compunit_symtab): Renamed from find_iterator_symtab. Change result to "struct compunit_symtab *". All callers updated. * block.h (struct global_block) <compunit_symtab>: Renamed from symtab. hange type to "struct compunit_symtab *". All uses updated. (struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab". Change type to "struct compunit_symtab *". All uses updated. * buildsym.c (struct buildsym_compunit): New struct. (subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete. (buildsym_compunit): New static global. (finish_block_internal): Update to fetch objfile from buildsym_compunit. (make_blockvector): Delete objfile argument. (start_subfile): Rewrite to use buildsym_compunit. Don't initialize debugformat, producer. (start_buildsym_compunit): New function. (free_buildsym_compunit): Renamed from free_subfiles_list. All callers updated. (patch_subfile_names): Rewrite to use buildsym_compunit. (get_compunit_symtab): New function. (get_macro_table): Delete argument comp_dir. All callers updated. (start_symtab): Change result to "struct compunit_symtab *". All callers updated. Create the subfile of the main source file. (watch_main_source_file_lossage): Rewrite to use buildsym_compunit. (reset_symtab_globals): Update. (end_symtab_get_static_block): Update to use buildsym_compunit. (end_symtab_without_blockvector): Rewrite. (end_symtab_with_blockvector): Change result to "struct compunit_symtab *". All callers updated. Update to use buildsym_compunit. Don't set symtab->dirname, instead set it in the compunit. Explicitly make sure main symtab is first in its list. Set debugformat, producer, blockvector, block_line_section, and macrotable in the compunit. (end_symtab_from_static_block): Change result to "struct compunit_symtab *". All callers updated. (end_symtab, end_expandable_symtab): Ditto. (set_missing_symtab): Change symtab argument to "struct compunit_symtab *". All callers updated. (augment_type_symtab): Ditto. (record_debugformat): Update to use buildsym_compunit. (record_producer): Update to use buildsym_compunit. * buildsym.h (struct subfile) <dirname>: Delete. <producer, debugformat>: Delete. <buildsym_compunit>: New member. (get_compunit_symtab): Declare. * dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed from primary_symtab. Change type to "struct compunit_symtab *". All uses updated. (dwarf2_start_symtab): Change result to "struct compunit_symtab *". All callers updated. (dwarf_decode_macros): Delete comp_dir argument. All callers updated. (struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from symtab. Change type to "struct compunit_symtab *". All uses updated. (dw2_instantiate_symtab): Change result to "struct compunit_symtab *". All callers updated. (dw2_find_last_source_symtab): Ditto. (dw2_lookup_symbol): Ditto. (recursively_find_pc_sect_compunit_symtab): Renamed from recursively_find_pc_sect_symtab. Change result to "struct compunit_symtab *". All callers updated. (dw2_find_pc_sect_compunit_symtab): Renamed from dw2_find_pc_sect_symtab. Change result to "struct compunit_symtab *". All callers updated. (get_compunit_symtab): Renamed from get_symtab. Change result to "struct compunit_symtab *". All callers updated. (recursively_compute_inclusions): Change type of immediate_parent argument to "struct compunit_symtab *". All callers updated. (compute_compunit_symtab_includes): Renamed from compute_symtab_includes. All callers updated. Rewrite to compute includes of compunit_symtabs and not symtabs. (process_full_comp_unit): Update to work with struct compunit_symtab. (process_full_type_unit): Ditto. (dwarf_decode_lines_1): Delete argument comp_dir. All callers updated. (dwarf_decode_lines): Remove special case handling of main subfile. (macro_start_file): Delete argument comp_dir. All callers updated. (dwarf_decode_macro_bytes): Ditto. * guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to use struct compunit_symtab. * i386-tdep.c (i386_skip_prologue): Fetch producer from compunit. * jit.c (finalize_symtab): Build compunit_symtab. * jv-lang.c (get_java_class_symtab): Change result to "struct compunit_symtab *". All callers updated. * macroscope.c (sal_macro_scope): Fetch macro table from compunit. * macrotab.c (struct macro_table) <compunit_symtab>: Renamed from comp_dir. Change type to "struct compunit_symtab *". All uses updated. (new_macro_table): Change comp_dir argument to cust, "struct compunit_symtab *". All callers updated. * maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from nr_primary_symtabs. All uses updated. (count_symtabs_and_blocks): Update to handle compunits. (report_command_stats): Update output, "primary symtabs" renamed to "compunits". * mdebugread.c (new_symtab): Change result to "struct compunit_symtab *". All callers updated. (parse_procedure): Change type of search_symtab argument to "struct compunit_symtab *". All callers updated. * objfiles.c (objfile_relocate1): Loop over blockvectors in a separate loop. * objfiles.h (struct objfile) <compunit_symtabs>: Renamed from symtabs. Change type to "struct compunit_symtab *". All uses updated. (ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS. All uses updated. (ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS. All uses updated. (ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated. (ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated. * psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from symtab. Change type to "struct compunit_symtab *". All uses updated. * psymtab.c (psymtab_to_symtab): Change result type to "struct compunit_symtab *". All callers updated. (find_pc_sect_compunit_symtab_from_partial): Renamed from find_pc_sect_symtab_from_partial. Change result type to "struct compunit_symtab *". All callers updated. (lookup_symbol_aux_psymtabs): Change result type to "struct compunit_symtab *". All callers updated. (find_last_source_symtab_from_partial): Ditto. * python/py-symtab.c (stpy_get_producer): Fetch producer from compunit. * source.c (forget_cached_source_info_for_objfile): Fetch debugformat and macro_table from compunit. * symfile-debug.c (debug_qf_find_last_source_symtab): Change result type to "struct compunit_symtab *". All callers updated. (debug_qf_lookup_symbol): Ditto. (debug_qf_find_pc_sect_compunit_symtab): Renamed from debug_qf_find_pc_sect_symtab, change result type to "struct compunit_symtab *". All callers updated. * symfile.c (allocate_symtab): Delete objfile argument. New argument cust. (allocate_compunit_symtab): New function. (add_compunit_symtab_to_objfile): New function. * symfile.h (struct quick_symbol_functions) <lookup_symbol>: Change result type to "struct compunit_symtab *". All uses updated. <find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab. Change result type to "struct compunit_symtab *". All uses updated. * symmisc.c (print_objfile_statistics): Compute blockvector count in separate loop. (dump_symtab_1): Update test for primary source symtab. (maintenance_info_symtabs): Update to handle compunit symtabs. (maintenance_check_symtabs): Ditto. * symtab.c (set_primary_symtab): Delete. (compunit_primary_filetab): New function. (compunit_language): New function. (iterate_over_some_symtabs): Change type of arguments "first", "after_last" to "struct compunit_symtab *". All callers updated. Update to loop over symtabs in each compunit. (error_in_psymtab_expansion): Rename symtab argument to cust, and change type to "struct compunit_symtab *". All callers updated. (find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab. Change result type to "struct compunit_symtab *". All callers updated. (find_pc_compunit_symtab): Renamed from find_pc_symtab. Change result type to "struct compunit_symtab *". All callers updated. (find_pc_sect_line): Only loop over symtabs within selected compunit instead of all symtabs in the objfile. * symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab. <compunit_symtab> New member. <block_line_section>: Moved to compunit_symtab. <locations_valid>: Ditto. <epilogue_unwind_valid>: Ditto. <macro_table>: Ditto. <dirname>: Ditto. <debugformat>: Ditto. <producer>: Ditto. <objfile>: Ditto. <call_site_htab>: Ditto. <includes>: Ditto. <user>: Ditto. <primary>: Delete (SYMTAB_COMPUNIT): New macro. (SYMTAB_BLOCKVECTOR): Update definition. (SYMTAB_OBJFILE): Update definition. (SYMTAB_DIRNAME): Update definition. (struct compunit_symtab): New type. Common members among all source symtabs within a compilation unit moved here. All uses updated. (COMPUNIT_OBJFILE): New macro. (COMPUNIT_FILETABS): New macro. (COMPUNIT_DEBUGFORMAT): New macro. (COMPUNIT_PRODUCER): New macro. (COMPUNIT_DIRNAME): New macro. (COMPUNIT_BLOCKVECTOR): New macro. (COMPUNIT_BLOCK_LINE_SECTION): New macro. (COMPUNIT_LOCATIONS_VALID): New macro. (COMPUNIT_EPILOGUE_UNWIND_VALID): New macro. (COMPUNIT_CALL_SITE_HTAB): New macro. (COMPUNIT_MACRO_TABLE): New macro. (ALL_COMPUNIT_FILETABS): New macro. (compunit_symtab_ptr): New typedef. (DEF_VEC_P (compunit_symtab_ptr)): New vector type. gdb/testsuite/ChangeLog: * gdb.base/maint.exp: Update expected output.
2014-11-18symtab.h (SYMTAB_BLOCKVECTOR): Renamed from BLOCKVECTOR. All uses updated.Doug Evans1-1/+1
gdb/ChangeLog: * symtab.h (SYMTAB_BLOCKVECTOR): Renamed from BLOCKVECTOR. All uses updated.
2014-08-07Include gdb_assert.h in common-defs.hGary Benson1-1/+0
This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h.
2014-07-24constify deprecate_cmdTom Tromey1-2/+2
This constifies deprecate_cmd and the "replacement" field in struct cmd_list_element. 2014-07-24 Tom Tromey <tromey@redhat.com> * cli/cli-decode.c (deprecate_cmd): Make "replacement" const. * cli/cli-decode.h (struct cmd_list_element) <replacement>: Now const. * command.h (deprecate_cmd): Update. * maint.c (maintenance_do_deprecate): Add casts.
2014-07-24constify maint.cTom Tromey1-6/+7
This does a bit of constification in maint.c, making print_bfd_section_info a bit cleaner in the process. 2014-07-24 Tom Tromey <tromey@redhat.com> * maint.c (match_bfd_flags): Make "string" const. (print_bfd_section_info): Remove casts. (print_objfile_section_info): Make "string" const.
2014-07-17Fix 17170.Doug Evans1-13/+25
* maint.c (count_symtabs_and_blocks): Handle NULL current_program_space. (report_command_stats): Check global enabled flag in addition to recorded enabled flag. (make_command_stats_cleanup): Handle msg_type == 0, startup. testsuite/ * gdb.base/maint.exp: Update testing of per-command stats.
2014-06-19Add new internal problem for demangler warningsGary Benson1-0/+15
This commit adds a new category of internal problem for demangler warnings. Demangler warnings behave in much the same way as internal warnings except that they do not create core files and no option to change this is presented to the user. gdb/ 2014-06-19 Gary Benson <gbenson@redhat.com> * utils.h (demangler_vwarning): New declaration. (demangler_warning): Likewise. * utils.c (struct internal_problem) <user_settable_should_quit>: New field. <user_settable_should_dump_core>: Likewise (internal_error_problem): Add values for above new fields. (internal_warning_problem): Likewise. (demangler_warning_problem): New static global. (demangler_vwarning): New function. (demangler_warning): Likewise. (add_internal_problem_command): Selectively add commands. (_initialize_utils): New internal problem command. * maint.c (maintenance_demangler_warning): New function. (_initialize_maint_cmds): New command. gdb/doc/ 2014-06-19 Gary Benson <gbenson@redhat.com> * gdb.texinfo (Maintenance Commands): Document new "maint demangler-warning" command and new "maint set/show demangler-warning" option.
generated by cgit v1.1 at 2024-12-18 05:07:49 +0000