| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Ref: https://sourceware.org/ml/gdb-patches/2016-09/msg00203.html
The std::{min,max} patch caused build failures when configuring GDB
with with --disable-nls and using GCC 4.1.
The reason is this bit in common/gdb_locale.h:
#ifdef ENABLE_NLS
...
#else
# define gettext(Msgid) (Msgid)
...
#endif
This causes problems if the <libintl.h> header is first included at
any point after "gdb_locale.h".
Specifically, the gettext&co declarations in libintl.h:
extern char *gettext (__const char *__msgid)
__THROW __attribute_format_arg__ (1);
end up broken after preprocessing:
extern char *(__const char *__msgid)
throw () __attribute__ ((__format_arg__ (1)));
After the std::min/std::max change to include <algorithm>, this now
happens with at least the GCC 4.1 copy of <algorithm>, which includes
<libintl.h> via <bits/stl_algobase.h>, <iosfwd>, and
<bits/c++locale.h>.
The fix is to simply remove the troublesome *gettext and *textdomain
macros, leaving only the _ and N_ ones.
gdb/ChangeLog:
2016-09-19 Pedro Alves <palves@redhat.com>
* common/gdb_locale.h [!ENABLE_NLS] (gettext, dgettext, dcgettext,
textdomain, bindtextdomain): Delete macros.
* main.c (captured_main) [!ENABLE_NLS]: Skip bintextdomain and
textdomain calls.
|
|
gdb's (or gdbserver's) own signal handling should not interfere with
the signal dispositions their spawned children inherit. However, it
currently does. For example, some paths in gdb cause SIGPIPE to be
set to SIG_IGN, and as consequence, the child starts with SIGPIPE to
set to SIG_IGN too, even though gdb was started with SIGPIPE set to
SIG_DFL.
This is because the exec family of functions does not reset the signal
disposition of signals that are set to SIG_IGN:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/execve.html
Signals set to the default action (SIG_DFL) in the calling process
image are set to the default action in the new process
image. Signals set to be ignored (SIG_IGN) by the calling process
image are set to be ignored by the new process image. Signals set to
be caught by the calling process image are set to the default action
in the new process image (see <signal.h>).
And neither does it reset signal masks or flags.
In order to be transparent, when spawning new child processes to debug
(with "run", etc.), reset signal actions and mask back to what was
originally inherited from gdb/gdbserver's parent, just before execing
the target program to debug.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (SFILES): Add
common/signals-state-save-restore.c.
(HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
(COMMON_OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* configure: Regenerate.
* fork-child.c: Include "signals-state-save-restore.h".
(fork_inferior): Call restore_original_signals_state.
* main.c: Include "signals-state-save-restore.h".
(captured_main): Call save_original_signals_state.
* common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
* common/signals-state-save-restore.c: New file.
* common/signals-state-save-restore.h: New file.
gdb/gdbserver/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Include "signals-state-save-restore.h".
(linux_create_inferior): Call
restore_original_signals_state.
* server.c: Include "dispositions-save-restore.h".
(captured_main): Call save_original_signals_state.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* gdb.base/signals-state-child.c: New file.
* gdb.base/signals-state-child.exp: New file.
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.
|
|
With all the previous plumbing in place, it's now easy to add a
command that actually creates a new console/mi UI.
The intended use case is to make it possible and easy for MI frontends
to provide a fully featured GDB console to users, with readline
support, command line editing, history, etc., just like if gdb was
started on the command line. Currently MI frontends have to try to
implement all of that theirselves and make use of "-interpreter-exec
console ...", which is far from perfect. If you ever tried Eclipse's
gdb console window, you'll know what I mean...
Instead of trying to multiplex console through MI, this command let's
just leverage all the built in readline/editing support already inside
gdb.
The plan is for the MI frontend to start GDB in regular console mode,
running inside a terminal emulator widget embedded in Eclipse (which
already exists, for supporting the shell widget; other frontends have
similar widgets), and then tell GDB to run a full MI interpreter on an
specified input/output device, independent of the console.
My original prototype planned to do things the other way around --
start GDB in MI mode, and then start an extra CLI console on separate
tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and
after experimentation and discussion, we ended up concluding that
starting GDB in CLI mode instead was both easier and actually also
supported an interesting use case -- connect an Eclipse frontend to a
GDB that is already running outside Eclipse.
The current usage is "new-ui <interpreter> <tty>".
E.g., on a terminal run this scriplet:
$ cat gdb-client
#!/bin/bash
reset
tty
tail -f /dev/null
$ gdb-client
/dev/pts/15
Now run gdb on another terminal, and tell it to start a MI interpreter
on the tty of the other terminal:
...
(gdb) new-ui mi /dev/pts/15
New UI allocated
Now back to the the gdb-client terminal, we'll get an MI prompt, ready
for MI input:
/dev/pts/15
=thread-group-added,id="i1"
(gdb)
You can also start a new UI running a CLI, with:
(gdb) new-ui console /dev/pts/15
Though note that this console won't support readline command editing.
It works as if "set editing off" was entered.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* interps.c (set_top_level_interpreter): New function, factored
out from captured_main.
(interpreter_completer): Make extern.
* interps.h (set_top_level_interpreter, interpreter_completer):
New declarations.
(captured_main): Use set_top_level_interpreter.
* top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
(open_terminal_stream, new_ui_command): New functions.
(init_main): Install the "new-ui" command.
|
|
This commit makes each UI have its own "stdin" stream pointer. This
is used to determine whether the "from_tty" argument to
execute_command, etc. should be true.
Related, this commit makes input_from_terminal_p take an UI parameter,
and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only
returns info on gdb's own main/primary terminal (the real stdin).
However, the places that call input_from_terminal_p really want to
know is whether the command came from an interactive tty. This patch
thus renames input_from_terminal_p to input_interactive_p for clarity,
and then makes input_interactive_p check for "set interactive" itself,
along with ISATTY, instead of calling gdb_has_a_terminal. Actually,
quit_force wants to call input_interactive_p _after_ stdin is closed,
we can't call ISATTY that late. So instead we save the result of
ISATTY in a field of the UI.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
(read_command_lines): Use input_interactive_p instead of
input_from_terminal_p.
* defs.h (struct ui): Forward declare.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this.
* event-top.c (stdin_event_handler): Pass 0 as from_tty argument
to quit_command.
(command_handler): Adjust to per-UI stdin.
(handle_line_of_input): Adjust to per-UI stdin and use
input_interactive_p instead of ISATTY and input_from_terminal_p.
(gdb_readline_no_editing_callback): Adjust to per-UI stdin.
(command_line_handler): Always pass true as "from_tty" parameter
of handle_line_of_input and execute_command.
(async_sigterm_handler): Pass 0 as from_tty argument to
quit_command.
* inflow.c (interactive_mode, show_interactive_mode): Moved to ...
(gdb_has_a_terminal): Don't check interactive_mode here.
(_initialize_inflow): Don't install "set interactive-mode" here.
* main.c (captured_command_loop): Adjust to per-UI stdin.
* mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
stdin.
* top.c (new_ui): Save the stdin stream and whether it's a tty.
(dont_repeat): Adjust to per-UI stdin.
(command_line_input): Adjust to per-UI stdin and to use
input_interactive_p.
(quit_force): Write history if any UI supports interactive input.
(interactive_mode, show_interactive_mode): Move here, from
inflow.c.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this, and check the "interactive_mode"
global instead of calling gdb_has_a_terminal.
(_initialize_top): Install "set interactive-mode" here.
* top.h (struct ui) <stdin_stream, input_interactive_p>: New
fields.
* utils.c (quit): Pass 0 as from_tty argument to quit_force.
(defaulted_query): Adjust to per-UI stdin and to use
input_interactive_p.
|
|
This is preparation for being able to create more than one UI object.
The change to gdb_main to stop using catch_errors is necessary because
catch_errors references current_uiout, which expands to
current_ui->m_current_ui, which would crash because current_ui is not
initialized yet at that point. It didn't trigger earlier in the
series because before this patch, main_ui/current_ui always start out
non-NULL.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (main_ui_): Delete.
(main_ui, current_ui, ui_list): No longer initialize here.
* main.c (captured_main): UI initialization code factored out to
new new_ui function.
(gdb_main): Wrap captured_main with TRY/CATCH instead of
catch_errors.
* top.c (highest_ui_num): New global.
(new_ui): New function.
* top.h (struct ui) <num>: New field.
(new_ui): New declaration.
|
|
When sync_execution (a boolean) is true, it means we're running a
foreground command -- we hide the prompt stop listening to input, give
the inferior the terminal, then go to the event loop waiting for the
target to stop.
With multiple independent UIs, we need to track whether each UI is
synchronously blocked waiting for the target. IOW, if you do
"continue" in one console, that console stops accepting commands, but
you should still be free to type other commands in the others
consoles.
Just simply making sync_execution be per-UI alone not sufficient,
because of this in fetch_inferior_event:
/* If the inferior was in sync execution mode, and now isn't,
restore the prompt (a synchronous execution command has finished,
and we're ready for input). */
if (current_ui->async && was_sync && !sync_execution)
observer_notify_sync_execution_done ();
We'd have to record at entry the "was_sync" state for each UI, not
just of the current UI.
This patch instead replaces the sync_execution flag by a per-UI
tristate flag indicating the command line prompt state:
enum prompt_state
{
/* The command line is blocked simulating synchronous execution.
This is used to implement the foreground execution commands
('run', 'continue', etc.). We won't display the prompt and
accept further commands until the execution is actually over. */
PROMPT_BLOCKED,
/* The command finished; display the prompt before returning back to
the top level. */
PROMPT_NEEDED,
/* We've displayed the prompt already, ready for input. */
PROMPTED,
;
I think the end result is _much_ clearer than the current code, and,
it addresses the original motivation too.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* annotate.c: Include top.h.
(async_background_execution_p): Delete.
(print_value_flags): Check the UI's prompt state rather then
async_background_execution_p.
* event-loop.c (start_event_loop): Set the prompt state to
PROMPT_NEEDED.
* event-top.c (display_gdb_prompt, async_enable_stdin)
(async_disable_stdin): Check the current UI's prompt state instead
of the sync_execution global.
(command_line_handler): Set the prompt state to PROMPT_NEEDED
before running a command, and display the prompt if still needed
afterwards.
* infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
(new_call_thread_fsm): New parameter 'waiting_ui'. Store it.
(call_thread_fsm_should_stop): Set the prompt state to
PROMPT_NEEDED.
(run_inferior_call): Adjust to temporarily set the prompt state to
PROMPT_BLOCKED instead of using the sync_execution global.
(call_function_by_hand_dummy): Pass the current UI to
new_call_thread_fsm.
* infcmd.c: Include top.h.
(continue_1): Check the current UI's prompt state instead of the
sync_execution global.
(continue_command): Validate global execution state before calling
prepare_execution_command.
(step_1): Call all_uis_check_sync_execution_done.
(attach_post_wait): Don't call async_enable_stdin here. Remove
reference to sync_execution.
* infrun.c (sync_execution): Delete global.
(follow_fork_inferior)
(reinstall_readline_callback_handler_cleanup): Check the current
UI's prompt state instead of the sync_execution global.
(check_curr_ui_sync_execution_done)
(all_uis_check_sync_execution_done): New functions.
(fetch_inferior_event): Call all_uis_check_sync_execution_done
instead of trying to determine whether the global sync execution
changed.
(handle_no_resumed): Check the prompt state of all UIs.
(normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
UIs. Emit the "Switching to" notification to all UIs. Enable
stdin in all UIs.
* infrun.h (sync_execution): Delete.
(all_uis_check_sync_execution_done): Declare.
* main.c (captured_command_loop): Don't call
interp_pre_command_loop if the prompt is blocked.
(catch_command_errors, catch_command_errors_const): Adjust.
(captured_main): Set the initial prompt state to PROMPT_NEEDED.
* mi/mi-interp.c (display_mi_prompt): Set the prompt state to
PROMPTED.
(mi_interpreter_resume): Don't clear sync_execution. Remove hack
comment.
(mi_execute_command_input_handler): Set the prompt state to
PROMPT_NEEDED before executing the command, and only display the
prompt if the prompt state is PROMPT_NEEDED afterwards.
(mi_on_resume_1): Adjust to check the prompt state.
* target.c (target_terminal_inferior): Adjust to check the prompt
state.
* top.c (wait_sync_command_done, maybe_wait_sync_command_done)
(execute_command): Check the current UI's prompt state instead of
sync_execution.
* top.h (enum prompt_state): New.
(struct ui) <prompt_state>: New field.
(ALL_UIS): New macro.
|
|
All interpreter types (CLI/TUI/MI) print the prompt, and then call
start_event_loop.
Because we'll need an interpreter hook to display the
interpreter-specific prompt before going back to the event loop,
without actually starting an event loop, this patch moves the
start_event_loop call to common code, and replaces the command_loop
hook with a pre_command_look hook, that now just prints the prompt.
Turns out to be a cleanup on its own right anyway.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interpreter_pre_command_loop): New
function.
(cli_interp_procs): Install it instead of cli_command_loop.
* cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
* event-top.c (cli_command_loop): Delete.
* interps.c (interp_new): Remove reference to command_loop_proc.
(current_interp_command_loop): Delete.
(interp_pre_command_loop): New function.
(interp_command_loop_ftype): Delete.
* interps.h (interp_pre_command_loop_ftype): New typedef.
(struct interp_procs) <command_loop_proc>: Delele field.
<pre_command_loop_proc>: New field.
(current_interp_command_loop): Delete declaration.
(interp_pre_command_loop): New declaration.
* main.c (captured_command_loop): Call interp_pre_command_loop
instead of current_interp_command_loop and start an event loop.
* mi/mi-interp.c (mi_command_loop): Delete.
(mi_interpreter_pre_command_loop): New.
(mi_interp_procs): Update.
* tui/tui-interp.c (tui_interp_procs): Install
cli_interpreter_pre_command_loop instead of cli_command_loop.
|
|
stderr_fileopen () references stderr directly, which doesn't work when
we have a separate UI with its own stderr-like stream. So this also
adds a "errstream" to "struct ui", and plumbs stderr_fileopen to take
a stream parameter.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (gdb_setup_readline): Pass the UI's outstream and
errstream to stdout_fileopen and stderr_fileopen.
* exceptions.c: Include top.h.
(print_flush): Open the current UI's outstream file descriptor,
instead of hardcoding file descriptor 1.
* main.c (captured_main): Save the main UI's out and error
streams. Adjust stderr_fileopen call.
* top.h (struct ui) <outstream, errstream>: New fields.
* ui-file.c (stderr_fileopen): Add stream parameter. Use it
instead of stderr.
* ui-file.h (stderr_fileopen): Add stream parameter and update
comment.
|
|
And with that, we can switch the current UI to the UI whose input
descriptor woke up the event loop. IOW, if the user types in UI 2,
the event loop wakes up, switches to UI 2, and processes the input.
Next the user types in UI 3, the event loop wakes up and switches to
UI 3, etc.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (input_fd): Delete.
(stdin_event_handler): Switch to the UI whose input descriptor got
the event. Adjust to per-UI input_fd.
(gdb_setup_readline): Don't set the input_fd global. Adjust to
per-UI input_fd.
(gdb_disable_readline): Adjust to per-UI input_fd.
* event-top.h (input_fd): Delete declaration.
* linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
from the event-loop here.
(linux_nat_terminal_ours): Don't register input_fd in the
event-loop here.
* main.c (captured_main): Adjust to per-UI input_fd.
* remote.c (remote_terminal_inferior): Don't remove input_fd from
the event-loop here.
(remote_terminal_ours): Don't register input_fd in the event-loop
here.
* target.c: Include top.h and event-top.h.
(target_terminal_inferior): Remove input_fd from the event-loop
here.
(target_terminal_ours): Register input_fd in the event-loop.
* top.h (struct ui) <input_fd>: New field.
|
|
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (execute_user_command, read_next_line)
(read_next_line): Adjust to per-UI instream.
* event-top.c (stdin_event_handler, command_handler)
(handle_line_of_input, command_line_handler)
(gdb_readline_no_editing_callback, async_sigterm_handler)
(gdb_setup_readline): Likewise.
* inflow.c: Include top.h.
(gdb_has_a_terminal, child_terminal_init_with_pgrp)
(gdb_save_tty_state, child_terminal_inferior)
(child_terminal_ours_1, copy_terminal_info): Use the main UI.
(initialize_stdin_serial): Adjust to per-UI instream.
* main.c (captured_command_loop, captured_main): Adjust to per-UI
instream.
* mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
* python/python.c (python_interactive_command): Likewise.
* terminal.h (struct ui): Forward declare.
(initialize_stdin_serial): Add struct ui parameter.
* top.c (instream): Delete.
(do_restore_instream_cleanup, read_command_file, dont_repeat)
(gdb_readline_no_editing, command_line_input)
(input_from_terminal_p, gdb_init): Adjust to per-UI instream.
* top.h (struct ui) <instream>: New field.
(instream): Delete declaration.
(quit): Adjust to per-UI instream.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new regexp.
|
|
If every UI instance has its own set of interpreters, then the current
scheme of creating the interpreters at GDB initialization time no
longer works. We need to create them whenever a new UI instance is
created.
The scheme implemented here has each interpreter register a factory
callback that when called creates a new instance of a specific
interpreter type. Then, when some code in gdb looks up an interpreter
(always by name), if there's none yet, the factory method is called to
construct one.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_uiout): Delete, moved into ...
(struct cli_interp): ... this new structure.
(cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history): Use interp_ui_out.
(cli_interpreter_init): If top level, set the cli_interp global.
(cli_interpreter_init): Return the interp's data instead of NULL.
(cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
to cli_uiout being in the interpreter's data.
(cli_interp_procs): New, factored out from _initialize_cli_interp.
(cli_interp_factory): New function.
(_initialize_cli_interp): Call interp_factory_register.
* interps.c (get_interp_info): New, factored out from ...
(get_current_interp_info): ... this.
(interp_new): Add parameter 'data'. Store it.
(struct interp_factory): New function.
(interp_factory_p): New typedef. Define a VEC_P.
(interpreter_factories): New global.
(interp_factory_register): New function.
(interp_add): Add 'ui' parameter. Use get_interp_info and
interp_lookup_existing.
(interp_lookup): Rename to ...
(interp_lookup_existing): ... this. Add 'ui' parameter. Don't
check for NULL or empty name here.
(interp_lookup): Add 'ui' parameter and reimplement.
(interp_set_temp, interpreter_exec_cmd): Adjust.
(interpreter_completer): Complete on registered interpreter
factories instead of interpreters.
* interps.h (interp_factory_func): New typedef.
(interp_factory_register): Declare.
(interp_new, interp_add): Adjust.
(interp_lookup): Declare.
* main.c (captured_main): Adjust.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
(mi_interp_procs): New, factored out from
_initialize_mi_interp.
(mi_interp_factory): New function.
* python/python.c (execute_gdb_command): Adjust.
* tui/tui-interp.c (tui_init): If top level, set the tui_interp
global.
(tui_interp_procs): New.
(tui_interp_factory): New function.
(_initialize_tui_interp): Call interp_factory_register.
|
|
Make each UI have its own interpreter list, top level interpreter,
current interpreter, etc. The "interpreter_async" global is not
really specific to an struct interp (it crosses interpreter-exec ...),
so I moved it to "struct ui" directly, while the other globals were
left hidden in interps.c, opaque to the rest of GDB.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1): Access the current UI's
async field instead of the interpreter_async global.
* cli/cli-script.c (execute_user_command, while_command)
(if_command, script_from_file): Likewise.
* compile/compile.c: Include top.h instead of interps.h.
(compile_file_command, compile_code_command)
(compile_print_command): Access the current UI's async field
instead of the interpreter_async global.
* guile/guile.c: Include top.h instead of interps.h.
(guile_repl_command, guile_command, gdbscm_execute_gdb_command):
Access the current UI's async field instead of the
interpreter_async global.
* guile/scm-ports.c: Include top.h instead of interps.h.
(ioscm_with_output_to_port_worker): Access the current UI's async
field instead of the interpreter_async global.
* inf-loop.c (inferior_event_handler): Likewise.
* infcall.c (run_inferior_call): Likewise.
* infrun.c (reinstall_readline_callback_handler_cleanup)
(fetch_inferior_event): Likewise.
* interps.c (interpreter_async): Delete.
(struct ui_interp_info): New.
(get_current_interp_info): New function.
(interp_list, current_interpreter, top_level_interpreter_ptr):
Delete.
(interp_add, interp_set, interp_lookup, interp_ui_out)
(current_interp_set_logging, interp_set_temp)
(current_interp_named_p): Adjust to per-UI interpreters.
(command_interpreter): Delete.
(command_interp, current_interp_command_loop, interp_quiet_p)
(interp_exec, interpreter_exec_cmd, interpreter_completer)
(top_level_interpreter, top_level_interpreter_data): Adjust to
per-UI interpreters.
* interps.h (interpreter_async): Delete.
* main.c (captured_command_loop): Access the current UI's async
field instead of the interpreter_async global.
* python/python.c (python_interactive_command, python_command)
(execute_gdb_command): Likewise.
* top.c (maybe_wait_sync_command_done, execute_command_to_string):
Access the current UI's async field instead of the
interpreter_async global.
* top.h (struct tl_interp_info): Forward declare.
(struct ui) <interp_info, async>: New fields.
|
|
We need to have these send output to the proper UI.
However, this patch still make them look like globals. Kind of like
__thread variables, if you will. Changing everything throughout to
write something like current_ui->gdb_stdout instead would be massive
overkill, IMNSHO.
This leaves gdb_stdtargin/stdtarg/stdtargerr global, but maybe that was a
mistake, I'm not sure -- IIRC, MI formats target I/O differently, so
if we have a separate MI channel, then I guess target output should go
there instead of to gdb's stdout. OTOH, maybe GDB should send that
instead to "set inferior-tty", instead of multiplexing it over MI. We
can always fix those later when it gets clearer where they should go.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
globals.
(gen_ret_current_ui_field_ptr): New macro. Use it to generate
wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
* top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
m_gdb_stdlog>: New fields.
(current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
(current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
(gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
macros.
|
|
The wildebeest-debian-wheezy-i686 buildslave's build is broken due to:
../../binutils-gdb/gdb/python/python.c: In function void _initialize_python():
../../binutils-gdb/gdb/python/python.c:1709:36: error: missing sentinel in function call [-Werror=format]
Reproduced on Fedora 23 by sticking a few:
#undef NULL
#define 0
in build/gdb/build-gnulib/{stddef|signal|stdio}.h. Hopefully this
caught all instances.
gdb/ChangeLog:
2016-04-21 Pedro Alves <palves@redhat.com>
* dwarf2read.c (try_open_dwop_file, open_dwo_file)
(file_file_name, file_full_name): Add char * cast to sentinel in
concat/reconcat calls.
* event-top.c (top_level_prompt): Likewise.
* guile/guile.c (initialize_scheme_side): Likewise.
* linux-tdep.c (linux_fill_prpsinfo): Likewise.
* macrotab.c (macro_source_fullname): Likewise.
* main.c (get_init_files, captured_main): Likewise.
* psymtab.c (psymtab_to_fullname): Likewise.
* python/python.c (_initialize_python)
(gdbpy_finish_initialization): Likewise.
* source.c (symtab_to_fullname): Likewise.
|
|
FreeBSD versions older than 11.0 use char * as the type of ss_sp in
stack_t instead of the standards-defined void *. C++ allows a char *
pointer to be converted to a void *, so it is safe to cast the return
value of xmalloc to char * if ss_sp is either a char * or void *.
Just always use the cast to char * since that is less ugly than having
to add a special case.
gdb/ChangeLog:
* main.c (setup_alternate_signal_stack): Cast to char *.
|
|
This call seems pointless. For instance, a SIGINT handler is only
installed later on. And if wasn't, I can't see why we'd want to lose
a Ctrl-C request.
Getting rid of this allows getting rid of clear_quit_flag.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* main.c (captured_main): Don't clear the quit flag.
|
|
There doesn't seem to be much point in trying to reuse this buffer.
Prefer simplicity instead.
(In case you're wondering whether this fixes an off-by-one: linelength
is misnamed; it's really a size including terminating null char.)
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (command_line_handler): Use xfree + xstrdup instead
of xrealloc + strcpy.
* main.c (captured_main): Use xstrdup instead of xmalloc plus
manual clear.
* top.c (saved_command_line): Rewrite comment.
(saved_command_line_size): Delete.
(command_line_input): Use xfree + xstrdup instead of xrealloc +
strcpy.
* top.h (saved_command_line_size): Delete declaration.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
See previous patch's description.
gdb/ChangeLog:
* macrocmd.c (print_macro_callback): Add cast(s).
* macrotab.c (macro_bcache_str): Likewise.
(new_macro_definition): Likewise.
* main.c (captured_main): Likewise.
* maint.c (print_bfd_section_info): Likewise.
* mdebugread.c (mdebug_build_psymtabs): Likewise.
(basic_type): Likewise.
* memattr.c (mem_region_cmp): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
(memory_map_end_memory): Likewise.
(memory_map_start_property): Likewise.
(memory_map_end_property): Likewise.
(clear_result): Likewise.
* memrange.c (compare_mem_ranges): Likewise.
* mep-tdep.c (mep_analyze_frame_prologue): Likewise.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Likewise.
* mi/mi-console.c (mi_console_file_delete): Likewise.
(mi_console_file_fputs): Likewise.
(mi_console_raw_packet): Likewise.
(mi_console_file_flush): Likewise.
(mi_console_set_raw): Likewise.
* mi/mi-interp.c (mi_interpreter_resume): Likewise.
(mi_new_thread): Likewise.
(mi_thread_exit): Likewise.
(mi_record_changed): Likewise.
(mi_inferior_added): Likewise.
(mi_inferior_appeared): Likewise.
(mi_inferior_exit): Likewise.
(mi_inferior_removed): Likewise.
(mi_interp_data): Likewise.
(mi_on_normal_stop): Likewise.
(mi_traceframe_changed): Likewise.
(mi_tsv_created): Likewise.
(mi_tsv_deleted): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_deleted): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_output_running_pid): Likewise.
(mi_inferior_count): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(report_initial_inferior): Likewise.
(mi_ui_out): Likewise.
(mi_set_logging): Likewise.
* mi/mi-main.c (collect_cores): Likewise.
(print_one_inferior): Likewise.
(free_vector_of_ints): Likewise.
(free_splay_tree): Likewise.
(mi_execute_command): Likewise.
* mi/mi-out.c (mi_table_body): Likewise.
(mi_table_end): Likewise.
(mi_table_header): Likewise.
(mi_begin): Likewise.
(mi_end): Likewise.
(mi_field_int): Likewise.
(mi_field_string): Likewise.
(mi_field_fmt): Likewise.
(mi_flush): Likewise.
(mi_redirect): Likewise.
(field_separator): Likewise.
(mi_open): Likewise.
(mi_close): Likewise.
(mi_out_buffered): Likewise.
(mi_out_rewind): Likewise.
(mi_out_put): Likewise.
(mi_version): Likewise.
(mi_out_data_dtor): Likewise.
* mi/mi-parse.c (mi_parse_cleanup): Likewise.
* microblaze-tdep.c (microblaze_frame_cache): Likewise.
* minidebug.c (lzma_open): Likewise.
(lzma_pread): Likewise.
(lzma_close): Likewise.
(lzma_stat): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mips-sde-tdep.c (mips_sde_frame_cache): Likewise.
(mips_sde_elf_osabi_sniff_abi_tag_sections): Likewise.
* mips-tdep.c (mips_insn16_frame_cache): Likewise.
(mips_micro_frame_cache): Likewise.
(mips_insn32_frame_cache): Likewise.
(mips_stub_frame_cache): Likewise.
(gdb_print_insn_mips): Likewise.
(value_of_mips_user_reg): Likewise.
(mips_gdbarch_init): Likewise.
* mips64obsd-tdep.c (mips64obsd_supply_gregset): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise.
(mipsnbsd_supply_gregset): Likewise.
* mn10300-linux-tdep.c (am33_supply_fpregset_method): Likewise.
(am33_collect_gregset_method): Likewise.
(am33_collect_fpregset_method): Likewise.
* mn10300-tdep.c (mn10300_analyze_frame_prologue): Likewise.
* moxie-tdep.c (moxie_frame_cache): Likewise.
* msp430-tdep.c (msp430_get_opcode_byte): Likewise.
(msp430_analyze_frame_prologue): Likewise.
* mt-tdep.c (mt_frame_unwind_cache): Likewise.
* nios2-linux-tdep.c (nios2_supply_gregset): Likewise.
(nios2_collect_gregset): Likewise.
* nios2-tdep.c (nios2_frame_unwind_cache): Likewise.
(nios2_stub_frame_cache): Likewise.
* objc-lang.c (find_methods): Likewise.
* objfiles.c (objfiles_pspace_data_cleanup): Likewise.
(get_objfile_pspace_data): Likewise.
(get_objfile_bfd_data): Likewise.
(objfile_bfd_data_free): Likewise.
(add_to_objfile_sections): Likewise.
(do_free_objfile_cleanup): Likewise.
(resume_section_map_updates_cleanup): Likewise.
* opencl-lang.c (builtin_opencl_type): Likewise.
* osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise.
* osdata.c (osdata_start_osdata): Likewise.
(osdata_start_item): Likewise.
(osdata_start_column): Likewise.
(osdata_end_column): Likewise.
(clear_parsing_data): Likewise.
(osdata_free_cleanup): Likewise.
* parse.c (type_stack_cleanup): Likewise.
(exp_uses_objfile_iter): Likewise.
* ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise.
(ppc_linux_collect_gregset): Likewise.
(ppu2spu_prev_arch): Likewise.
(ppu2spu_this_id): Likewise.
(ppu2spu_prev_register): Likewise.
(ppu2spu_unwind_register): Likewise.
(ppu2spu_sniffer): Likewise.
(ppu2spu_dealloc_cache): Likewise.
(ppc_linux_init_abi): Likewise.
* ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* progspace.c (restore_program_space): Likewise.
* psymtab.c (find_pc_sect_psymtab): Likewise.
(compare_psymbols): Likewise.
(psymbol_bcache_full): Likewise.
(allocate_psymtab): Likewise.
(discard_psymtabs_upto): Likewise.
* python/py-block.c (set_block): Likewise.
(del_objfile_blocks): Likewise.
* python/py-breakpoint.c (build_bp_list): Likewise.
* python/py-inferior.c (inferior_to_inferior_object): Likewise.
(build_inferior_list): Likewise.
(py_free_inferior): Likewise.
* python/py-objfile.c (py_free_objfile): Likewise.
(objfile_to_objfile_object): Likewise.
* python/py-prettyprint.c (py_restore_tstate): Likewise.
* python/py-progspace.c (py_free_pspace): Likewise.
(pspace_to_pspace_object): Likewise.
* python/py-symbol.c (set_symbol): Likewise.
(del_objfile_symbols): Likewise.
* python/py-symtab.c (set_sal): Likewise.
(set_symtab): Likewise.
(del_objfile_symtab): Likewise.
(del_objfile_sal): Likewise.
* python/py-type.c (save_objfile_types): Likewise.
(set_type): Likewise.
* python/py-unwind.c (pyuw_prev_register): Likewise.
(pyuw_on_new_gdbarch): Likewise.
* python/py-utils.c (py_decref): Likewise.
(py_xdecref): Likewise.
(gdb_py_generic_dict): Likewise.
* python/py-xmethods.c (gdbpy_free_xmethod_worker_data): Likewise.
(gdbpy_clone_xmethod_worker_data): Likewise.
(gdbpy_get_xmethod_arg_types): Likewise.
(gdbpy_get_xmethod_result_type): Likewise.
(gdbpy_invoke_xmethod): Likewise.
* python/python.c (gdbpy_apply_type_printers): Likewise.
(gdbpy_free_type_printers): Likewise.
* record-btrace.c (record_btrace_disable_callback): Likewise.
(bfcache_hash): Likewise.
(bfcache_eq): Likewise.
(btrace_get_frame_function): Likewise.
(record_btrace_frame_unwind_stop_reason): Likewise.
(record_btrace_frame_this_id): Likewise.
(record_btrace_frame_prev_register): Likewise.
(record_btrace_frame_dealloc_cache): Likewise.
* record-full.c (record_full_message_wrapper): Likewise.
(record_full_save_cleanups): Likewise.
* regcache.c (regcache_descr): Likewise.
(do_regcache_xfree): Likewise.
(do_regcache_invalidate): Likewise.
(do_cooked_read): Likewise.
(regcache_transfer_regset): Likewise.
* reggroups.c (reggroup_add): Likewise.
(reggroup_next): Likewise.
(reggroup_prev): Likewise.
* remote-fileio.c (do_remote_fileio_request): Likewise.
* remote-notif.c (remote_async_get_pending_events_handler): Likewise.
(do_notif_event_xfree): Likewise.
* remote.c (get_remote_arch_state): Likewise.
(remote_pspace_data_cleanup): Likewise.
(get_remote_exec_file): Likewise.
(set_pspace_remote_exec_file): Likewise.
(compare_pnums): Likewise.
(clear_threads_listing_context): Likewise.
(remote_newthread_step): Likewise.
(start_thread): Likewise.
(end_thread): Likewise.
(remove_child_of_pending_fork): Likewise.
(remove_stop_reply_for_inferior): Likewise.
(remove_stop_reply_of_remote_state): Likewise.
(remote_notif_remove_once_on_match): Likewise.
(stop_reply_match_ptid_and_ws): Likewise.
(kill_child_of_pending_fork): Likewise.
(register_remote_g_packet_guess): Likewise.
(remote_read_description_p): Likewise.
(remote_read_description): Likewise.
(free_actions_list_cleanup_wrapper): Likewise.
(remote_async_serial_handler): Likewise.
* rl78-tdep.c (rl78_get_opcode_byte): Likewise.
(rl78_analyze_frame_prologue): Likewise.
* rs6000-tdep.c (ppc_supply_gregset): Likewise.
(ppc_supply_fpregset): Likewise.
(ppc_supply_vsxregset): Likewise.
(ppc_supply_vrregset): Likewise.
(ppc_collect_gregset): Likewise.
(ppc_collect_fpregset): Likewise.
(ppc_collect_vsxregset): Likewise.
(ppc_collect_vrregset): Likewise.
(e500_move_ev_register): Likewise.
(do_regcache_raw_write): Likewise.
(rs6000_frame_cache): Likewise.
(rs6000_epilogue_frame_cache): Likewise.
(rs6000_gdbarch_init): Likewise.
* rx-tdep.c (rx_get_opcode_byte): Likewise.
(rx_analyze_frame_prologue): Likewise.
(rx_frame_type): Likewise.
(rx_frame_sniffer_common): Likewise.
* s390-linux-tdep.c (s390_check_for_saved): Likewise.
(s390_frame_unwind_cache): Likewise.
(s390_stub_frame_unwind_cache): Likewise.
(s390_sigtramp_frame_unwind_cache): Likewise.
* score-tdep.c (score_make_prologue_cache): Likewise.
* sentinel-frame.c (sentinel_frame_prev_register): Likewise.
(sentinel_frame_prev_arch): Likewise.
* ser-base.c (fd_event): Likewise.
(push_event): Likewise.
(ser_base_write): Likewise.
* ser-pipe.c (pipe_close): Likewise.
* serial.c (serial_write): Likewise.
* sh-tdep.c (sh_frame_cache): Likewise.
(sh_stub_this_id): Likewise.
* sh64-tdep.c (sh64_frame_cache): Likewise.
* solib-aix.c (get_solib_aix_inferior_data): Likewise.
(library_list_start_library): Likewise.
(library_list_start_list): Likewise.
(solib_aix_free_library_list): Likewise.
* solib-darwin.c (get_darwin_info): Likewise.
* solib-dsbt.c (get_dsbt_info): Likewise.
* solib-spu.c (append_ocl_sos): Likewise.
* solib-svr4.c (svr4_pspace_data_cleanup): Likewise.
(get_svr4_info): Likewise.
(library_list_start_library): Likewise.
(svr4_library_list_start_list): Likewise.
(hash_probe_and_action): Likewise.
(equal_probe_and_action): Likewise.
(svr4_update_solib_event_breakpoint): Likewise.
(set_solib_svr4_fetch_link_map_offsets): Likewise.
(svr4_fetch_link_map_offsets): Likewise.
(svr4_have_link_map_offsets): Likewise.
* solib-target.c (library_list_start_segment): Likewise.
(library_list_start_section): Likewise.
(library_list_start_library): Likewise.
(library_list_end_library): Likewise.
(library_list_start_list): Likewise.
(solib_target_free_library_list): Likewise.
* solib.c (solib_ops): Likewise.
(set_solib_ops): Likewise.
* sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_cache): Likewise.
* sparc-tdep.c (sparc_frame_cache): Likewise.
(sparc32_frame_cache): Likewise.
(sparc32_supply_gregset): Likewise.
(sparc32_collect_gregset): Likewise.
(sparc32_supply_fpregset): Likewise.
(sparc32_collect_fpregset): Likewise.
* sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_cache): Likewise.
* sparc64-tdep.c (sparc64_supply_gregset): Likewise.
(sparc64_collect_gregset): Likewise.
(sparc64_supply_fpregset): Likewise.
(sparc64_collect_fpregset): Likewise.
* sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_cache): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_cache): Likewise.
* sparc64obsd-tdep.c (sparc64obsd_frame_cache): Likewise.
(sparc64obsd_trapframe_cache): Likewise.
* sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_cache): Likewise.
* sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_cache): Likewise.
* spu-multiarch.c (spu_gdbarch): Likewise.
* spu-tdep.c (spu_frame_unwind_cache): Likewise.
(spu2ppu_prev_arch): Likewise.
(spu2ppu_this_id): Likewise.
(spu2ppu_prev_register): Likewise.
(spu2ppu_dealloc_cache): Likewise.
(spu_dis_asm_print_address): Likewise.
(gdb_print_insn_spu): Likewise.
(spu_get_overlay_table): Likewise.
* stabsread.c (rs6000_builtin_type): Likewise.
* stack.c (do_print_variable_and_value): Likewise.
* stap-probe.c (get_stap_base_address_1): Likewise.
* symfile-debug.c (debug_qf_has_symbols): Likewise.
(debug_qf_find_last_source_symtab): Likewise.
(debug_qf_forget_cached_source_info): Likewise.
(debug_qf_map_symtabs_matching_filename): Likewise.
(debug_qf_lookup_symbol): Likewise.
(debug_qf_print_stats): Likewise.
(debug_qf_dump): Likewise.
(debug_qf_relocate): Likewise.
(debug_qf_expand_symtabs_for_function): Likewise.
(debug_qf_expand_all_symtabs): Likewise.
(debug_qf_expand_symtabs_with_fullname): Likewise.
(debug_qf_map_matching_symbols): Likewise.
(debug_qf_expand_symtabs_matching): Likewise.
(debug_qf_find_pc_sect_compunit_symtab): Likewise.
(debug_qf_map_symbol_filenames): Likewise.
(debug_sym_get_probes): Likewise.
(debug_sym_new_init): Likewise.
(debug_sym_init): Likewise.
(debug_sym_read): Likewise.
(debug_sym_read_psymbols): Likewise.
(debug_sym_finish): Likewise.
(debug_sym_offsets): Likewise.
(debug_sym_read_linetable): Likewise.
(debug_sym_relocate): Likewise.
(uninstall_symfile_debug_logging): Likewise.
* symfile-mem.c (symbol_file_add_from_memory_wrapper): Likewise.
* symfile.c (place_section): Likewise.
(add_section_size_callback): Likewise.
(load_progress): Likewise.
(load_section_callback): Likewise.
(clear_memory_write_data): Likewise.
(allocate_symtab): Likewise.
* symmisc.c (maintenance_expand_file_matcher): Likewise.
* symtab.c (lookup_symtab_callback): Likewise.
(hash_demangled_name_entry): Likewise.
(eq_demangled_name_entry): Likewise.
(get_symbol_cache): Likewise.
(symbol_cache_cleanup): Likewise.
(set_symbol_cache_size): Likewise.
(symbol_cache_flush): Likewise.
(maintenance_print_symbol_cache): Likewise.
(maintenance_print_symbol_cache_statistics): Likewise.
(delete_filename_seen_cache): Likewise.
(output_partial_symbol_filename): Likewise.
(search_symbols_file_matches): Likewise.
(search_symbols_name_matches): Likewise.
(do_free_completion_list): Likewise.
(maybe_add_partial_symtab_filename): Likewise.
(get_main_info): Likewise.
(main_info_cleanup): Likewise.
* target-dcache.c (target_dcache_cleanup): Likewise.
(target_dcache_init_p): Likewise.
(target_dcache_invalidate): Likewise.
(target_dcache_get): Likewise.
(target_dcache_get_or_init): Likewise.
* target-descriptions.c (target_find_description): Likewise.
(tdesc_find_type): Likewise.
(tdesc_data_cleanup): Likewise.
(tdesc_find_arch_register): Likewise.
(tdesc_register_name): Likewise.
(tdesc_register_type): Likewise.
(tdesc_register_reggroup_p): Likewise.
(set_tdesc_pseudo_register_name): Likewise.
(set_tdesc_pseudo_register_type): Likewise.
(set_tdesc_pseudo_register_reggroup_p): Likewise.
(tdesc_use_registers): Likewise.
(free_target_description): Likewise.
* target-memory.c (compare_block_starting_address): Likewise.
(cleanup_request_data): Likewise.
(cleanup_write_requests_vector): Likewise.
* target.c (open_target): Likewise.
(cleanup_restore_target_terminal): Likewise.
(free_memory_read_result_vector): Likewise.
* thread.c (disable_thread_stack_temporaries): Likewise.
(finish_thread_state_cleanup): Likewise.
(do_restore_current_thread_cleanup): Likewise.
(restore_current_thread_cleanup_dtor): Likewise.
(set_thread_refcount): Likewise.
(tp_array_compar): Likewise.
(do_captured_thread_select): Likewise.
* tic6x-tdep.c (tic6x_frame_unwind_cache): Likewise.
(tic6x_stub_this_id): Likewise.
* tilegx-tdep.c (tilegx_frame_cache): Likewise.
* top.c (do_restore_instream_cleanup): Likewise.
(gdb_readline_wrapper_cleanup): Likewise.
(kill_or_detach): Likewise.
(print_inferior_quit_action): Likewise.
* tracefile-tfile.c (match_blocktype): Likewise.
(build_traceframe_info): Likewise.
* tracefile.c (trace_file_writer_xfree): Likewise.
* tracepoint.c (memrange_cmp): Likewise.
(do_collect_symbol): Likewise.
(do_clear_collection_list): Likewise.
(do_restore_current_traceframe_cleanup): Likewise.
(restore_current_traceframe_cleanup_dtor): Likewise.
(free_current_marker): Likewise.
(traceframe_info_start_memory): Likewise.
(traceframe_info_start_tvar): Likewise.
(free_result): Likewise.
* tramp-frame.c (tramp_frame_cache): Likewise.
* tui/tui-file.c (tui_file_delete): Likewise.
(tui_fileopen): Likewise.
(tui_sfileopen): Likewise.
(tui_file_isatty): Likewise.
(tui_file_rewind): Likewise.
(tui_file_put): Likewise.
(tui_file_fputs): Likewise.
(tui_file_get_strbuf): Likewise.
(tui_file_adjust_strbuf): Likewise.
(tui_file_flush): Likewise.
* tui/tui-layout.c (make_command_window): Likewise.
(make_data_window): Likewise.
(show_source_disasm_command): Likewise.
(show_data): Likewise.
(make_source_or_disasm_window): Likewise.
(show_source_or_disasm_and_command): Likewise.
* tui/tui-out.c (tui_field_int): Likewise.
(tui_field_string): Likewise.
(tui_field_fmt): Likewise.
(tui_text): Likewise.
* typeprint.c (hash_typedef_field): Likewise.
(eq_typedef_field): Likewise.
(do_free_typedef_hash): Likewise.
(copy_typedef_hash_element): Likewise.
(do_free_global_table): Likewise.
(find_global_typedef): Likewise.
(find_typedef_in_hash): Likewise.
* ui-file.c (ui_file_write_for_put): Likewise.
(do_ui_file_xstrdup): Likewise.
(mem_file_delete): Likewise.
(mem_file_rewind): Likewise.
(mem_file_put): Likewise.
(mem_file_write): Likewise.
(stdio_file_delete): Likewise.
(stdio_file_flush): Likewise.
(stdio_file_read): Likewise.
(stdio_file_write): Likewise.
(stdio_file_write_async_safe): Likewise.
(stdio_file_fputs): Likewise.
(stdio_file_isatty): Likewise.
(stdio_file_fseek): Likewise.
(tee_file_delete): Likewise.
(tee_file_flush): Likewise.
(tee_file_write): Likewise.
(tee_file_fputs): Likewise.
(tee_file_isatty): Likewise.
* ui-out.c (do_cleanup_table_end): Likewise.
(do_cleanup_end): Likewise.
* user-regs.c (user_reg_add): Likewise.
(user_reg_map_name_to_regnum): Likewise.
(usernum_to_user_reg): Likewise.
(maintenance_print_user_registers): Likewise.
* utils.c (do_bfd_close_cleanup): Likewise.
(do_fclose_cleanup): Likewise.
(do_obstack_free): Likewise.
(do_ui_file_delete): Likewise.
(do_ui_out_redirect_pop): Likewise.
(do_free_section_addr_info): Likewise.
(restore_integer): Likewise.
(do_unpush_target): Likewise.
(do_htab_delete_cleanup): Likewise.
(do_restore_ui_file): Likewise.
(do_value_free): Likewise.
(do_free_so): Likewise.
(free_current_contents): Likewise.
(do_regfree_cleanup): Likewise.
(core_addr_hash): Likewise.
(core_addr_eq): Likewise.
(do_free_char_ptr_vec): Likewise.
* v850-tdep.c (v850_frame_cache): Likewise.
* varobj.c (do_free_variable_cleanup): Likewise.
* vax-tdep.c (vax_supply_gregset): Likewise.
(vax_frame_cache): Likewise.
* vaxobsd-tdep.c (vaxobsd_sigtramp_frame_cache): Likewise.
* xml-support.c (gdb_xml_body_text): Likewise.
(gdb_xml_values_cleanup): Likewise.
(gdb_xml_start_element): Likewise.
(gdb_xml_start_element_wrapper): Likewise.
(gdb_xml_end_element): Likewise.
(gdb_xml_end_element_wrapper): Likewise.
(gdb_xml_cleanup): Likewise.
(gdb_xml_fetch_external_entity): Likewise.
(gdb_xml_parse_attr_enum): Likewise.
(xinclude_start_include): Likewise.
(xinclude_end_include): Likewise.
(xml_xinclude_default): Likewise.
(xml_xinclude_start_doctype): Likewise.
(xml_xinclude_end_doctype): Likewise.
(xml_xinclude_cleanup): Likewise.
(xml_fetch_content_from_file): Likewise.
* xml-syscall.c (free_syscalls_info): Likewise.
(syscall_start_syscall): Likewise.
* xml-tdesc.c (tdesc_end_arch): Likewise.
(tdesc_end_osabi): Likewise.
(tdesc_end_compatible): Likewise.
(tdesc_start_target): Likewise.
(tdesc_start_feature): Likewise.
(tdesc_start_reg): Likewise.
(tdesc_start_union): Likewise.
(tdesc_start_struct): Likewise.
(tdesc_start_flags): Likewise.
(tdesc_start_field): Likewise.
(tdesc_start_vector): Likewise.
(fetch_available_features_from_target): Likewise.
* xstormy16-tdep.c (xstormy16_frame_cache): Likewise.
* xtensa-tdep.c (xtensa_supply_gregset): Likewise.
(xtensa_frame_cache): Likewise.
(xtensa_frame_prev_register): Likewise.
(xtensa_extract_return_value): Likewise.
|
|
This hook is no longer used, and can therefore be eliminated.
gdb/ChangeLog:
* defs.h (deprecated_init_ui_hook): Delete. Remove associated
comment.
* top.c (deprecated_init_ui_hook): Delete.
(gdb_init): Remove handling of deprecated_init_ui_hook.
* interps.c (clear_interpreter_hooks): Remove handling of
deprecated_init_ui_hook.
* main.c (captured_main): Update comment.
|
|
Pedro Alves:
The commands that enables aren't even documented in the manual.
Judging from that, I assume that only wdb users would ever really
be using the --xdb switch.
I think it's time to drop "support" for the --xdb switch too. I
looked through the commands that that exposes, the only that looked
potentially interesting was "go", but then it's just an alias
for "tbreak+jump", which can easily be done with "define go...end".
I'd rather free up the "go" name for something potentially
more interesting (either run control, or maybe even unrelated,
e.g., for golang).
gdb/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add removed -xdb.
* breakpoint.c (command_line_is_silent): Remove xdb_commands
conditional.
(_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
and lb.
* cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
va.
* cli/cli-decode.c (find_command_name_length): Remove xdb_commands
conditional.
* defs.h (xdb_commands): Remove declaration.
* f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
* guile/scm-cmd.c (command_classes): Remove xdb from comment.
* infcmd.c (run_no_args_command, go_command): Remove.
(_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
* infrun.c (xdb_handle_command): Remove.
(_initialize_infrun): Remove xdb_commands for lz and z.
* main.c (xdb_commands): Remove variable.
(captured_main): Remove "xdb" from long_options.
(print_gdb_help): Remove --xdb from help.
* python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
* source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
* stack.c (backtrace_full_command, args_plus_locals_info)
(current_frame_command): Remove.
(_initialize_stack): Remove xdb_commands for t, T and l.
* symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
* thread.c (_initialize_thread): Remove xdb_commands condition.
* tui/tui-layout.c (tui_toggle_layout_command)
(tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
(_initialize_tui_layout): Remove xdb_commands for td and ts.
* tui/tui-regs.c (tui_scroll_regs_forward_command)
(tui_scroll_regs_backward_command): Remove.
(_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
* tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
(_initialize_tui_win): Remove xdb_commands for U and w.
* utils.c (pagination_on_command, pagination_off_command): Remove.
(initialize_utils): Remove xdb_commands for am and sm.
gdb/doc/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Mode Options): Remove -xdb.
|
|
This commit makes GDB default to a sysroot of "target:".
One testcase needed updating as a result of this change.
gdb/ChangeLog:
* main.c (captured_main): Set gdb_sysroot to "target:"
if not otherwise set.
gdb/testsuite/ChangeLog:
* gdb.base/break-probes.exp: Cope with "target:" sysroot.
|
|
After the previous patch, this is the last remaining use of a volatile
struct gdb_exception. Kill it, as it's troublesome for C++: we can't
assign volatile <-> non-volatile without copy constructors /
assignment operators that do that, which I'd rather avoid.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* main.c (handle_command_errors): Remove volatile qualifier from
parameter.
|
|
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
|
|
All callers of catch_command_errors pass RETURN_MASK_ALL as mask
argument. This patch eliminates the mask parameter as unnecessary.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* main.c (catch_command_errors, catch_command_errors_const):
Remove 'mask' argument. Adjust.
(captured_main): Adjust callers.
gdb/testsuite/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* gdb.gdb/python-interrupts.exp (test_python_interrupts): Adjust
call to catch_command_errors.
* gdb.gdb/python-selftest.exp (selftest_python): Adjust call to
catch_command_errors.
|
|
In C, an enum or structure defined inside other structure has global
scope just like it had been defined outside the struct in the first
place. However, in C++, such a nested structure is given a name that
is nested inside the structure. This patch moves such affected
structures/enums out to global scope, so that code using them works
the same in C++ as it works today in C.
gdb/ChangeLog:
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* dwarf2-frame.c (enum cfa_how_kind, struct
dwarf2_frame_state_reg_info): Move out of struct
dwarf2_frame_state.
* dwarf2read.c (struct tu_stats): Move out of struct
dwarf2_per_objfile.
(struct file_entry): Move out of struct line_header.
(struct nextfield, struct nextfnfield, struct fnfieldlist, struct
typedef_field_list): Move out of struct field_info.
* gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
Move out of struct dynamic_prop.
(union type_owner, union field_location, struct field, struct
range_bounds, union type_specific): Move out of struct main_type.
(struct fn_fieldlist, struct fn_field, struct typedef_field)
(VOFFSET_STATIC): Move out of struct cplus_struct_type.
(struct call_site_target, union call_site_parameter_u, struct
call_site_parameter): Move out of struct call_site.
* m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
m32c_prologue.
(enum srcdest_kind): Move out of struct srcdest.
* main.c (enum cmdarg_kind): Move out of struct cmdarg.
* prologue-value.h (enum prologue_value_kind): Move out of struct
prologue_value.
* s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
gdbarch_tdep.
* stabsread.c (struct nextfield, struct next_fnfieldlist): Move
out of struct field_info.
* symfile.h (struct other_sections): Move out of struct
section_addr_info.
* symtab.c (struct symbol_cache_slot): Move out struct
block_symbol_cache.
* target-descriptions.c (enum tdesc_type_kind): Move out of
typedef struct tdesc_type.
* tui/tui-data.h (enum tui_line_or_address_kind): Move out of
struct tui_line_or_address.
* value.c (enum internalvar_kind, union internalvar_data): Move
out of struct internalvar.
* xtensa-tdep.h (struct ctype_cache): Move out of struct
gdbarch_tdep.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB
.c files include defs.h as their first line, so no file other than
utils.h needs to include exceptions.h. This commit removes all such
inclusions.
gdb/ChangeLog:
* ada-lang.c: Do not include exceptions.h.
* ada-valprint.c: Likewise.
* amd64-tdep.c: Likewise.
* auto-load.c: Likewise.
* block.c: Likewise.
* break-catch-throw.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* c-lang.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-script.c: Likewise.
* completer.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* darwin-nat.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* event-top.c: Likewise.
* f-valprint.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* gdbtypes.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* guile/scm-breakpoint.c: Likewise.
* guile/scm-cmd.c: Likewise.
* guile/scm-frame.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-param.c: Likewise.
* guile/scm-symbol.c: Likewise.
* guile/scm-type.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* inf-loop.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* interps.h: Likewise.
* jit.c: Likewise.
* linespec.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32r-rom.c: Likewise.
* main.c: Likewise.
* memory-map.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* monitor.c: Likewise.
* nto-procfs.c: Likewise.
* objc-lang.c: Likewise.
* p-valprint.c: Likewise.
* parse.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* printcmd.c: Likewise.
* probe.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-breakpoint.c: Likewise.
* python/py-cmd.c: Likewise.
* python/py-finishbreakpoint.c: Likewise.
* python/py-frame.c: Likewise.
* python/py-framefilter.c: Likewise.
* python/py-function.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* python/py-inferior.c: Likewise.
* python/py-infthread.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-linetable.c: Likewise.
* python/py-param.c: Likewise.
* python/py-prettyprint.c: Likewise.
* python/py-symbol.c: Likewise.
* python/py-type.c: Likewise.
* python/py-value.c: Likewise.
* python/python-internal.h: Likewise.
* python/python.c: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* regcache.c: Likewise.
* remote-fileio.c: Likewise.
* remote-mips.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* skip.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-ia64-hpux.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib.c: Likewise.
* spu-tdep.c: Likewise.
* stack.c: Likewise.
* stap-probe.c: Likewise.
* symfile-mem.c: Likewise.
* symmisc.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-interp.c: Likewise.
* typeprint.c: Likewise.
* utils.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* windows-nat.c: Likewise.
* xml-support.c: Likewise.
|
|
Doing:
gdb --pid=PID -ex run
Results in GDB getting a SIGTTIN, and thus ending stopped. That's
usually indicative of a missing target_terminal_ours call.
E.g., from the PR:
$ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run
[1] 28263
[1] Killed sleep 1h
[2]+ Stopped gdb -batch sleep $p -ex run
The workaround is doing:
gdb -ex "attach $PID" -ex "run"
instead of
gdb [-p] $PID -ex "run"
With the former, gdb waits for the attach command to complete before
moving on to the "run" command, because the interpreter is in sync
mode at this point, within execute_command. But for the latter,
attach_command is called directly from captured_main, and thus misses
that waiting. IOW, "run" is running before the attach continuation
has run, before the program stops and attach completes. The broken
terminal settings are just one symptom of that. Any command that
queries or requires input results in the same.
The fix is to wait in catch_command_errors (which is specific to
main.c nowadays), just like we wait in execute_command.
gdb/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* main.c: Include "infrun.h".
(catch_command_errors, catch_command_errors_const): Wait for the
foreground command to complete.
* top.c (maybe_wait_sync_command_done): New function, factored out
from ...
(maybe_wait_sync_command_done): ... here.
* top.h (maybe_wait_sync_command_done): New declaration.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
* gdb.base/attach.exp (test_command_line_attach_run): New
procedure.
(top level): Call it.
|
|
Various warnings are emitted during startup and option-parsing using
fprintf_unfiltered. One warning is prefixed with the command name,
the others are not. This commit replaces these hardwired warnings
with calls to warning. It also sets warning_pre_print to prefix all
warnings with the command name until option parsing is complete.
gdb/ChangeLog:
* main.c (captured_main): Use warning during startup.
Prefix startup warning messages with command name.
|
|
This commit replaces the hardwired fprintf/exit error handlers
for usage errors with calls to error.
gdb/ChangeLog:
* main.c (captured_main): Handle usage errors with error.
|
|
If the requested interpreter cannot be set captured_main reports the
error with a hardwired fprintf/exit pair. A fprintf/exit pair on the
previous line was replaced with a call to error in March 2003
(https://sourceware.org/ml/gdb-patches/2003-03/msg00444.html) but I
found no documentation as to why this particular hardwired handler
was left untouched. I was also unable to come up with a situation
where error would not be suitable, so I have replaced it with a call
to error.
gdb/ChangeLog:
* main.c (captured_main): Replace a fprintf/exit
pair with a call to error. Wrap the message with _().
|
|
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
|
|
This constifies exec_file_attach and updates the rest of gdb.
Insight will need some minor tweaks after this, though it's worth
noting that I think all that hook stuff can actually just go away. I
sent a patch to this effect once, but since the Insight source
repository situation isn't currently resolved there wasn't a
convenient way to test it.
2014-07-30 Tom Tromey <tromey@redhat.com>
* corefile.c (hook_type, call_extra_exec_file_hooks)
(specify_exec_file_hook): Constify.
* exec.c (exec_file_attach): Make "filename" const.
* gdbcore.h (deprecated_exec_file_display_hook)
(specify_exec_file_hook, exec_file_attach): Constify.
* main.c (captured_main): Use catch_command_errors_const.
|
|
readline/gdb
This fixes:
$ ./gdb program -ex "set height 2" -ex "start"
...
Reading symbols from /home/pedro/gdb/tests/threads...done.
---Type <return> to continue, or q <return> to quit---^CQuit << ctrl-c triggers a Quit
*type something*
readline: readline_callback_read_char() called with no handler!
Aborted
$
Usually, if an error propagates all the way to the top level, we'll
re-enable stdin, in case the command that was running was a
synchronous command. That's done in the event loop's actual loop
(event-loop.c:start_event_loop). However, if a foreground execution
command is run before the event loop starts and throws, nothing is
presently reenabling stdin, which leaves sync_execution set.
When we do start the event loop, because sync_execution is still
(mistakenly) set, display_gdb_prompt removes the readline input
callback, even though stdin is registered in the event loop. Any
input from here on results in readline aborting.
Such commands are run through catch_command_errors,
catch_command_errors_const, so add the tweak there.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* main.c: Include event-top.h.
(handle_command_errors): New function.
(catch_command_errors, catch_command_errors_const): Use it.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-execution-startup.c: New file.
* gdb.base/paginate-execution-startup.exp: New file.
* lib/gdb.exp (pagination_prompt): New global.
(default_gdb_spawn): New procedure, factored out from
default_gdb_spawn.
(default_gdb_start): Adjust to call default_gdb_spawn.
(gdb_spawn): New procedure.
|
|
We'll need to add error handling code to commands run before the event
loop starts (commands in .gdbinit, -ex commands, etc.). Turns out
those are run through catch_command_errors, and, catch_command_errors
is used nowhere else. Move it (and the _const variant) to main.c, so
that we can further specialize it freely.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* exceptions.c (catch_command_errors, catch_command_errors_const):
Moved to main.c.
* exceptions.h (catch_command_errors_ftype)
(catch_command_errors_const_ftype): Moved to main.c.
(catch_command_errors, catch_command_errors_const): Delete
declarations.
* main.c (catch_command_errors_ftype)
(catch_command_errors_const_ftype): Moved here from exceptions.h.
(catch_command_errors, catch_command_errors_const)): Moved here
from exceptions.c and make static.
|
|
This commit wraps calls to the demangler with a segmentation fault
handler. The first time a segmentation fault is caught a core file
is generated and the user is prompted to file a bug and offered the
choice to exit or to continue their GDB session. A maintainence
option is provided to allow the user to disable the crash handler
if required.
gdb/
2014-06-19 Gary Benson <gbenson@redhat.com>
* configure.ac [AC_CHECK_FUNCS] <sigaltstack>: New check.
* configure: Regenerate.
* config.in: Likewise.
* main.c (signal.h): New include.
(setup_alternate_signal_stack): New function.
(captured_main): Call the above.
* cp-support.c (signal.h): New include.
(catch_demangler_crashes): New flag.
(SIGJMP_BUF): New define.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
(gdb_demangle_jmp_buf): New static global.
(gdb_demangle_attempt_core_dump): Likewise.
(gdb_demangle_signal_handler): New function.
(gdb_demangle): If catch_demangler_crashes is set, install the
above signal handler before calling bfd_demangle, and restore
the original signal handler afterwards. Display the offending
symbol and call demangler_warning the first time a segmentation
fault is caught.
(_initialize_cp_support): New maint set/show command.
gdb/doc/
2014-06-19 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Maintenance Commands): Document new
"maint set/show catch-demangler-crashes" option.
|
|
|
|
* NEWS: Mention it.
* main.c (set_gdb_data_directory): New function.
(captured_main): Recognize -D. Flag error for --data-directory "".
Call set_gdb_data_directory.
(print_gdb_help): Print --data-directory, -D.
* main.h (set_gdb_data_directory): Declare.
* top.c (staged_gdb_datadir): New static global.
(set_gdb_datadir): Call set_gdb_data_directory
(show_gdb_datadir): New function.
(init_main): Update init of data-directory parameter.
testsuite/
* gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
Update.
(do_syscall_tests_without_xml): Update.
doc/
* gdb.texinfo (Mode Options): Add -D.
|
|
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
|
|
Nothing actually uses use_windows, not even Insight. So, this patch
removes it.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (use_windows): Remove.
* gdb.c (main): Update.
* main.c (captured_main, gdb_main): Update.
* main.h (struct captured_main_args) <use_windows>: Remove.
* top.c (use_windows): Remove.
|
|
|
|
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
|
|
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
gdb/
2013-09-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Constification.
* main.c (captured_main): Replace catch_command_errors by
catch_command_errors_const. Twice.
* symfile.c (symbol_file_add_main_1): Make args parameter const.
(symbol_file_add): Make name parameter const.
(symbol_file_add_main, symbol_file_add_main_1): Make args parameter const.
(symfile_bfd_open): Make name parameter const, rename it to cname. Add
variable name. Change their usage accordingly.
* symfile.h (symbol_file_add, symfile_bfd_open): Make first parameter
const.
(symbol_file_add_main): Make args parameter const.
|
|
https://sourceware.org/ml/gdb-patches/2013-09/msg00225.html
gdb/ChangeLog
* main.h (get_gdb_program_name): Add declaration.
* main.c (get_gdb_program_name): Add definition.
|
|
* event-top.c (gdb_setup_readline): Call stderr_fileopen
instead of stdio_fileopen.
* main.c (captured_main) [__MINGW32__]: Set stderr unbuffered.
.Call stderr_fileopen instead of stdio_fileopen.
* ui-file.c [__MINGW32__] (stderr_file_write): New function.
[__MINGW32__] (stderr_file_fputs): New function.
(stderr_fileopen): New function.
* ui-file.h (stderr_fileopen): Declare.
|
|
http://sourceware.org/ml/gdb-patches/2013-07/msg00844.html
gdb/ChangeLog
* cli/cli-script.c (script_from_file): Remove use of
error_pre_print.
* main.c (captured_main): Remove use of error_pre_print and
quit_pre_print.
* utils.c (error_pre_print, quit_pre_print): Remove.
* utils.h (error_pre_print, quit_pre_print): Likewise.
|
|
|
|
* main.c (print_gdb_help): Regroup options in the --help text.
See http://sourceware.org/ml/gdb-patches/2013-04/msg00362.html for
the relevant discussions.
|
