| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the context of ROCm-gdb [1], the ROCm target sits on top of the
linux-nat target. when a process forks, it needs to carry over some
data from the forking inferior to the fork child inferior. Ideally, the
ROCm target would implement the follow_fork target_ops method, but there
are some small problems. This patch fixes these, which helps the ROCm
target, but also makes things more consistent and a bit nicer in
general, I believe.
The main problem is: when follow-fork-mode is "parent",
target_follow_fork is called with the parent as the current inferior.
When it's "child", target_follow_fork is called with the child as the
current inferior. This means that target_follow_fork is sometimes
called on the parent's target stack and sometimes on the child's target
stack.
The parent's target stack may contain targets above the process target,
such as the ROCm target. So if follow-fork-child is "parent", the ROCm
target would get notified of the fork and do whatever is needed. But
the child's target stack, at that moment, only contains the exec and
process target copied over from the parent. The child's target stack is
set up by follow_fork_inferior, before calling target_follow_fork. In
that case, the ROCm target wouldn't get notified of the fork.
For consistency, I think it would be good to always call
target_follow_fork on the parent inferior's target stack. I think it
makes sense as a way to indicate "this inferior has called fork, do
whatever is needed". The desired outcome of the fork (whether an
inferior is created for the child, do we need to detach from the child)
can be indicated by passed parameter.
I therefore propose these changes:
- make follow_fork_inferior always call target_follow_fork with the
parent as the current inferior. That lets all targets present on the
parent's target stack do some fork-related handling and push
themselves on the fork child's target stack if needed.
For this purpose, pass the child inferior down to target_follow_fork
and follow_fork implementations. This is nullptr if no inferior is
created for the child, because we want to detach from it.
- as a result, in follow_fork_inferior, detach from the parent inferior
(if needed) only after the target_follow_fork call. This is needed
because we want to call target_follow_fork before the parent's
target stack is torn down.
- hand over to the targets in the parent's target stack (including the
process target) the responsibility to push themselves, if needed, to
the child's target stack. Also hand over the responsibility to the
process target, at the same time, to create the child's initial
thread (just like we do for follow_exec).
- pass the child inferior to exec_on_vfork, so we don't need to swap
the current inferior between parent and child. Nothing in
exec_on_vfork depends on the current inferior, after this change.
Although this could perhaps be replaced with just having the exec
target implement follow_fork and push itself in the child's target
stack, like the process target does... We would just need to make
sure the process target calls beneath()->follow_fork(...). I'm not
sure about this one.
gdb/ChangeLog:
* target.h (struct target_ops) <follow_fork>: Add inferior*
parameter.
(target_follow_fork): Likewise.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
(fbsd_nat_target::follow_fork): Likewise, and call
inf_ptrace_target::follow_fork.
* linux-nat.h (class linux_nat_target) <follow_fork>: Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Likewise, and
call inf_ptrace_target::follow_fork.
* obsd-nat.h (obsd_nat_target) <follow_fork>: Likewise.
* obsd-nat.c (obsd_nat_target::follow_fork): Likewise, and call
inf_ptrace_target::follow_fork.
* remote.c (class remote_target) <follow_fork>: Likewise.
(remote_target::follow_fork): Likewise, and call
process_stratum_target::follow_fork.
* process-stratum-target.h (class process_stratum_target)
<follow_fork>: New.
* process-stratum-target.c
(process_stratum_target::follow_fork): New.
* target-delegates.c: Re-generate.
[1] https://github.com/ROCm-Developer-Tools/ROCgdb
Change-Id: I460bd0af850f0485e8aed4b24c6d8262a4c69929
|
|
This is a small cleanup I think would be nice, that I spotted while
doing the following patch.
gdb/ChangeLog:
* target.h (struct target_ops) <follow_fork>: Add ptid and
target_waitkind parameters.
(target_follow_fork): Likewise.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
* fbsd-nat.c (fbsd_nat_target::follow_fork): Likewise.
* linux-nat.h (class linux_nat_target) <follow_fork>: Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Likewise.
* obsd-nat.h (class obsd_nat_target) <follow_fork>: Likewise.
* obsd-nat.c (obsd_nat_target::follow_fork): Likewise.
* remote.c (class remote_target) <follow_fork>: Likewise.
* target-debug.h (target_debug_print_target_waitkind): New.
* target-delegates.c: Re-generate.
Change-Id: I5421a542f2e19100a22b74cc333d2b235d0de3c8
|
|
GDB doesn't handle well the case of an inferior using the JIT interface
to register JIT-ed objfiles and forking. If an inferior registers a
code object using the JIT interface and then forks, the child process
conceptually has the same code object loaded, so GDB should look it up
and learn about it (it currently doesn't).
To achieve this, I think it would make sense to have the
inferior_created observable called when an inferior is created due to a
fork in follow_fork_inferior. The inferior_created observable is
currently called both after starting a new inferior and after attaching
to an inferior, allowing various sub-components to learn about that new
executing inferior. We can see handling a fork child just like
attaching to it, so any work done when attaching should also be done in
the case of a fork child.
Instead of just calling the inferior_created observable, this patch
makes follow_fork_inferior call the whole post_create_inferior function.
This way, the attach and follow-fork code code paths are more alike.
Given that post_create_inferior calls solib_create_inferior_hook,
follow_fork_inferior doesn't need to do it itself, so those calls to
solib_create_inferior_hook are removed.
One question you may have: why not just call post_create_inferior at the
places where solib_create_inferior_hook is currently called, instead of
after target_follow_fork?
- there's something fishy for the second solib_create_inferior_hook
call site: at this point we have switched the current program space
to the child's, but not the current inferior nor the current thread.
So solib_create_inferior_hook (and everything under, including
check_for_thread_db, for example) is called with inferior 1 as the
current inferior and inferior 2's program space as the current
program space. I think that's wrong, because at this point we are
setting up inferior 2, and all that code relies on the current
inferior. We could just add a switch_to_thread call before it to
make inferior 2 the current one, but there are other problems (see
below).
- solib_create_inferior_hook is currently not called on the
`follow_child && detach_fork` path. I think we need to call it,
because we still get a new inferior in that case (even though we
detach the parent). If we only call post_create_inferior where
solib_create_inferior_hook used to be called, then the JIT
subcomponent doesn't get informed about the new inferior, and that
introduces a failure in the new gdb.base/jit-elf-fork.exp test.
- if we try to put the post_create_inferior just after the
switch_to_thread that was originally at line 662, or just before the
call to target_follow_fork, we introduce a subtle failure in
gdb.threads/fork-thread-pending.exp. What happens then is that
libthread_db gets loaded (somewhere under post_create_inferior)
before the linux-nat target learns about the LWPs (which happens in
linux_nat_target::follow_fork). As a result, the ALL_LWPS loop in
try_thread_db_load_1 doesn't see the child LWP, and the thread-db
target doesn't have the chance to fill in thread_info::priv. A bit
later, when the test does "info threads", and
thread_db_target::pid_to_str is called, the thread-db target doesn't
recognize the thread as one of its own, and delegates the request to
the target below. Because the pid_to_str output is not the expected
one, the test fails.
This tells me that we need to call the process target's follow_fork
first, to make the process target create the necessary LWP and thread
structures. Then, we can call post_create_inferior to let the other
components of GDB do their thing.
But then you may ask: check_for_thread_db is already called today,
somewhere under solib_create_inferior_hook, and that is before
target_follow_fork, why don't we see this ordering problem!? Well,
because of the first bullet point: when check_for_thread_db /
thread_db_load are called, the current inferior is (erroneously)
inferior 1, the parent. Because libthread_db is already loaded for
the parent, thread_db_load early returns. check_for_thread_db later
gets called by linux_nat_target::follow_fork. At this point, the
current inferior is the correct one and the child's LWP exists, so
all is well.
Since we now call post_create_inferior after target_follow_fork, which
calls the inferior_created observable, which calls check_for_thread_db,
I don't think linux_nat_target needs to explicitly call
check_for_thread_db itself, so that is removed.
In terms of testing, this patch adds a new gdb.base/jit-elf-fork.exp
test. It makes an inferior register a JIT code object and then fork.
It then verifies that whatever the detach-on-fork and follow-fork-child
parameters are, GDB knows about the JIT code object in all the inferiors
that survive the fork. It verifies that the inferiors can unload that
code object.
There isn't currently a way to get visibility into GDB's idea of the JIT
code objects for each inferior. For the purpose of this test, add the
"maintenance info jit" command. There isn't much we can print about the
JIT code objects except their load address. So the output looks a bit
bare, but it's good enough for the test.
gdb/ChangeLog:
* NEWS: Mention "maint info jit" command.
* infrun.c (follow_fork_inferior): Don't call
solib_create_inferior_hook, call post_create_inferior if a new
inferior was created.
* jit.c (maint_info_jit_cmd): New.
(_initialize_jit): Register new command.
* linux-nat.c (linux_nat_target::follow_fork): Don't call
check_for_thread_db.
* linux-nat.h (check_for_thread_db): Remove declaration.
* linux-thread-db.c (check_thread_signals): Make static.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Mention "maint info jit".
gdb/testsuite/ChangeLog:
* gdb.base/jit-elf-fork-main.c: New test.
* gdb.base/jit-elf-fork-solib.c: New test.
* gdb.base/jit-elf-fork.exp: New test.
Change-Id: I9a192e55b8a451c00e88100669283fc9ca60de5c
|
|
A following patch will want to take some action when a pending wait
status is set on or removed from a thread. Add a getter and a setter on
thread_info for the pending waitstatus, so that we can add some code in
the setter later.
The thing is, the pending wait status field is in the
thread_suspend_state, along with other fields that we need to backup
before and restore after the thread does an inferior function call.
Therefore, make the thread_suspend_state member private
(thread_info::suspend becomes thread_info::m_suspend), and add getters /
setters for all of its fields:
- pending wait status
- stop signal
- stop reason
- stop pc
For the pending wait status, add the additional has_pending_waitstatus
and clear_pending_waitstatus methods.
I think this makes the thread_info interface a bit nicer, because we
now access the fields as:
thread->stop_pc ()
rather than
thread->suspend.stop_pc
The stop_pc field being in the `suspend` structure is an implementation
detail of thread_info that callers don't need to be aware of.
For the backup / restore of the thread_suspend_state structure, add
save_suspend_to and restore_suspend_from methods. You might wonder why
`save_suspend_to`, as opposed to a simple getter like
thread_suspend_state &suspend ();
I want to make it clear that this is to be used only for backing up and
restoring the suspend state, _not_ to access fields like:
thread->suspend ()->stop_pc
Adding some getters / setters allows adding some assertions. I find
that this helps understand how things are supposed to work. Add:
- When getting the pending status (pending_waitstatus method), ensure
that there is a pending status.
- When setting a pending status (set_pending_waitstatus method), ensure
there is no pending status.
There is one case I found where this wasn't true - in
remote_target::process_initial_stop_replies - which needed adjustments
to respect that contract. I think it's because
process_initial_stop_replies is kind of (ab)using the
thread_info::suspend::waitstatus to store some statuses temporarily, for
its internal use (statuses it doesn't intent on leaving pending).
process_initial_stop_replies pulls out stop replies received during the
initial connection using target_wait. It always stores the received
event in `evthread->suspend.waitstatus`. But it only sets
waitstatus_pending_p, if it deems the event interesting enough to leave
pending, to be reported to the core:
if (ws.kind != TARGET_WAITKIND_STOPPED
|| ws.value.sig != GDB_SIGNAL_0)
evthread->suspend.waitstatus_pending_p = 1;
It later uses this flag a bit below, to choose which thread to make the
"selected" one:
if (selected == NULL
&& thread->suspend.waitstatus_pending_p)
selected = thread;
And ultimately that's used if the user-visible mode is all-stop, so that
we print the stop for that interesting thread:
/* In all-stop, we only print the status of one thread, and leave
others with their status pending. */
if (!non_stop)
{
thread_info *thread = selected;
if (thread == NULL)
thread = lowest_stopped;
if (thread == NULL)
thread = first;
print_one_stopped_thread (thread);
}
But in any case (all-stop or non-stop), print_one_stopped_thread needs
to access the waitstatus value of these threads that don't have a
pending waitstatus (those that had TARGET_WAITKIND_STOPPED +
GDB_SIGNAL_0). This doesn't work with the assertions I've
put.
So, change the code to only set the thread's wait status if it is an
interesting one that we are going to leave pending. If the thread
stopped due to a non-interesting event (TARGET_WAITKIND_STOPPED +
GDB_SIGNAL_0), don't store it. Adjust print_one_stopped_thread to
understand that if a thread has no pending waitstatus, it's because it
stopped with TARGET_WAITKIND_STOPPED + GDB_SIGNAL_0.
The call to set_last_target_status also uses the pending waitstatus.
However, given that the pending waitstatus for the thread may have been
cleared in print_one_stopped_thread (and that there might not even be a
pending waitstatus in the first place, as explained above), it is no
longer possible to do it at this point. To fix that, move the call to
set_last_target_status in print_one_stopped_thread. I think this will
preserve the existing behavior, because set_last_target_status is
currently using the current thread's wait status. And the current
thread is the last one for which print_one_stopped_thread is called. So
by calling set_last_target_status in print_one_stopped_thread, we'll get
the same result. set_last_target_status will possibly be called
multiple times, but only the last call will matter. It just means
possibly more calls to set_last_target_status, but those are cheap.
Change-Id: Iedab9653238eaf8231abcf0baa20145acc8b77a7
|
|
Currently, on GNU/Linux, if you try to access memory and you have a
running thread selected, GDB fails the memory accesses, like:
(gdb) c&
Continuing.
(gdb) p global_var
Cannot access memory at address 0x555555558010
Or:
(gdb) b main
Breakpoint 2 at 0x55555555524d: file access-mem-running.c, line 59.
Warning:
Cannot insert breakpoint 2.
Cannot access memory at address 0x55555555524d
This patch removes this limitation. It teaches the native Linux
target to read/write memory even if the target is running. And it
does this without temporarily stopping threads. We now get:
(gdb) c&
Continuing.
(gdb) p global_var
$1 = 123
(gdb) b main
Breakpoint 2 at 0x555555555259: file access-mem-running.c, line 62.
(The scenarios above work correctly with current GDBserver, because
GDBserver temporarily stops all threads in the process whenever GDB
wants to access memory (see prepare_to_access_memory /
done_accessing_memory). Freezing the whole process makes sense when
we need to be sure that we have a consistent view of memory and don't
race with the inferior changing it at the same time as GDB is
accessing it. But I think that's a too-heavy hammer for the default
behavior. I think that ideally, whether to stop all threads or not
should be policy decided by gdb core, probably best implemented by
exposing something like gdbserver's prepare_to_access_memory /
done_accessing_memory to gdb core.)
Currently, if we're accessing (reading/writing) just a few bytes, then
the Linux native backend does not try accessing memory via
/proc/<pid>/mem and goes straight to ptrace
PTRACE_PEEKTEXT/PTRACE_POKETEXT. However, ptrace always fails when
the ptracee is running. So the first step is to prefer
/proc/<pid>/mem even for small accesses. Without further changes
however, that may cause a performance regression, due to constantly
opening and closing /proc/<pid>/mem for each memory access. So the
next step is to keep the /proc/<pid>/mem file open across memory
accesses. If we have this, then it doesn't make sense anymore to even
have the ptrace fallback, so the patch disables it.
I've made it such that GDB only ever has one /proc/<pid>/mem file open
at any time. As long as a memory access hits the same inferior
process as the previous access, then we reuse the previously open
file. If however, we access memory of a different process, then we
close the previous file and open a new one for the new process.
If we wanted, we could keep one /proc/<pid>/mem file open per
inferior, and never close them (unless the inferior exits or execs).
However, having seen bfd patches recently about hitting too many open
file descriptors, I kept the logic to have only one file open tops.
Also, we need to handle memory accesses for processes for which we
don't have an inferior object, for when we need to detach a
fork-child, and we'd probaly want to handle caching the open file for
that scenario (no inferior for process) too, which would probably end
up meaning caching for last non-inferior process, which is very much
what I'm proposing anyhow. So always having one file open likely ends
up a smaller patch.
The next step is handling the case of GDB reading/writing memory
through a thread that is running and exits. The access should not
result in a user-visible failure if the inferior/process is still
alive.
Once we manage to open a /proc/<lwpid>/mem file, then that file is
usable for memory accesses even if the corresponding lwp exits and is
reaped. I double checked that trying to open the same
/proc/<lwpid>/mem path again fails because the lwp is really gone so
there's no /proc/<lwpid>/ entry on the filesystem anymore, but the
previously open file remains usable. It's only when the whole process
execs that we need to reopen a new file.
When the kernel destroys the whole address space, i.e., when the
process exits or execs, the reads/writes fail with 0 aka EOF, in which
case there's nothing else to do than returning a memory access
failure. Note this means that when we get an exec event, we need to
reopen the file, to access the process's new address space.
If we need to open (or reopen) the /proc/<pid>/mem file, and the LWP
we're opening it for exits before we open it and before we reap the
LWP (i.e., the LWP is zombie), the open fails with EACCES. The patch
handles this by just looking for another thread until it finds one
that we can open a /proc/<pid>/mem successfully for.
If we need to open (or reopen) the /proc/<pid>/mem file, and the LWP
we're opening has exited and we already reaped it, which is the case
if the selected thread is in THREAD_EXIT state, the open fails with
ENOENT. The patch handles this the same way as a zombie race
(EACCES), instead of checking upfront whether we're accessing a
known-exited thread, because that would result in more complicated
code, because we also need to handle accessing lwps that are not
listed in the core thread list, and it's the core thread list that
records the THREAD_EXIT state.
The patch includes two testcases:
#1 - gdb.base/access-mem-running.exp
This is the conceptually simplest - it is single-threaded, and has
GDB read and write memory while the program is running. It also
tests setting a breakpoint while the program is running, and checks
that the breakpoint is hit immediately.
#2 - gdb.threads/access-mem-running-thread-exit.exp
This one is more elaborate, as it continuously spawns short-lived
threads in order to exercise accessing memory just while threads are
exiting. It also spawns two different processes and alternates
accessing memory between the two processes to exercise the reopening
the /proc file frequently. This also ends up exercising GDB reading
from an exited thread frequently. I confirmed by putting abort()
calls in the EACCES/ENOENT paths added by the patch that we do hit
all of them frequently with the testcase. It also exits the
process's main thread (i.e., the main thread becomes zombie), to
make sure accessing memory in such a corner-case scenario works now
and in the future.
The tests fail on GNU/Linux native before the code changes, and pass
after. They pass against current GDBserver, again because GDBserver
supports memory access even if all threads are running, by
transparently pausing the whole process.
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
PR mi/15729
PR gdb/13463
* linux-nat.c (linux_nat_target::detach): Close the
/proc/<pid>/mem file if it was open for this process.
(linux_handle_extended_wait) <PTRACE_EVENT_EXEC>: Close the
/proc/<pid>/mem file if it was open for this process.
(linux_nat_target::mourn_inferior): Close the /proc/<pid>/mem file
if it was open for this process.
(linux_nat_target::xfer_partial): Adjust. Do not fall back to
inf_ptrace_target::xfer_partial for memory accesses.
(last_proc_mem_file): New.
(maybe_close_proc_mem_file): New.
(linux_proc_xfer_memory_partial_pid): New, with bits factored out
from linux_proc_xfer_partial.
(linux_proc_xfer_partial): Delete.
(linux_proc_xfer_memory_partial): New.
gdb/testsuite/ChangeLog
yyyy-mm-dd Pedro Alves <pedro@palves.net>
PR mi/15729
PR gdb/13463
* gdb.base/access-mem-running.c: New.
* gdb.base/access-mem-running.exp: New.
* gdb.threads/access-mem-running-thread-exit.c: New.
* gdb.threads/access-mem-running-thread-exit.exp: New.
Change-Id: Ib3c082528872662a3fc0ca9b31c34d4876c874c9
|
|
Instead of using a static buffer. This is safer, and we don't really
mind about any extra dynamic allocation here, since it's only used for
debug purposes.
gdb/ChangeLog:
* nat/linux-waitpid.c (status_to_str): Return std::string.
* nat/linux-waitpid.h (status_to_str): Likewise.
* linux-nat.c (linux_nat_post_attach_wait): Adjust.
(linux_nat_target::attach): Adjust.
(linux_handle_extended_wait): Adjust.
(wait_lwp): Adjust.
(stop_wait_callback): Adjust.
(linux_nat_filter_event): Adjust.
(linux_nat_wait_1): Adjust.
* nat/linux-waitpid.c (status_to_str): Adjust.
* nat/linux-waitpid.h (status_to_str): Adjust.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::wait_for_event_filtered):
Adjust to status_to_str returning std::string.
Change-Id: Ia8aead70270438a5690f243e6faafff6c38ff757
|
|
Currently, in order to tell whether support for disabling address
space randomization on Linux is available, GDB checks if the
personality syscall works, at configure time. I.e., it does a run
test, instead of a compile/link test:
AC_RUN_IFELSE([PERSONALITY_TEST],
[have_personality=true],
[have_personality=false],
This is a bit bogus, because the machine the build is done on may not
(and is when you consider distro gdbs) be the machine that eventually
runs gdb. It would be better if this were a compile/link test
instead, and then at runtime, GDB coped with the personality syscall
failing. Actually, GDB already copes.
One environment where this is problematic is building GDB in a Docker
container -- by default, Docker runs the container with seccomp, with
a profile that disables the personality syscall. You can tell Docker
to use a less restricted seccomp profile, but I think we should just
fix it in GDB.
"man 2 personality" says:
This system call first appeared in Linux 1.1.20 (and thus first
in a stable kernel release with Linux 1.2.0); library support
was added in glibc 2.3.
...
ADDR_NO_RANDOMIZE (since Linux 2.6.12)
With this flag set, disable address-space-layout randomization.
glibc 2.3 was released in 2002.
Linux 2.6.12 was released in 2005.
The original patch that added the configure checks was submitted in
2008. The first version of the patch that was submitted to the list
called personality from common code:
https://sourceware.org/pipermail/gdb-patches/2008-June/058204.html
and then was moved to Linux-specific code:
https://sourceware.org/pipermail/gdb-patches/2008-June/058209.html
Since HAVE_PERSONALITY is only checked in Linux code, and
ADDR_NO_RANDOMIZE exists for over 15 years, I propose just completely
removing the configure checks.
If for some odd reason, some remotely modern system still needs a
configure check, then we can revert this commit but drop the
AC_RUN_IFELSE in favor of always doing the AC_LINK_IFELSE
cross-compile fallback.
gdb/ChangeLog:
* linux-nat.c (linux_nat_target::supports_disable_randomization):
Remove references to HAVE_PERSONALITY.
* nat/linux-personality.c: Remove references to HAVE_PERSONALITY.
(maybe_disable_address_space_randomization)
(~maybe_disable_address_space_randomizatio): Remove references to
HAVE_PERSONALITY.
* config.in, configure: Regenerate.
gdbserver/ChangeLog:
* linux-low.cc:
(linux_process_target::supports_disable_randomization): Remove
reference to HAVE_PERSONALITY.
* config.in, configure: Regenerate.
gdbsupport/ChangeLog:
* common.m4 (personality test): Remove.
|
|
I noticed that all implementations return false, so
target_ops::follow_fork doesn't really need to return a value. Change
it to return void.
gdb/ChangeLog:
* target.h (struct target_ops) <follow_fork>: Return void.
(target_follow_fork): Likewise.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* infrun.c (follow_fork_inferior): Adjust.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Return void.
* fbsd-nat.c (fbsd_nat_target:::follow_fork): Likewise.
* linux-nat.h (class linux_nat_target) <follow_fork>: Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Return void.
* obsd-nat.h (class obsd_nat_target) <follow_fork>: Return void.
* obsd-nat.c (obsd_nat_target::follow_fork): Likewise.
* remote.c (class remote_target) <follow_fork>: Likewise.
(remote_target::follow_fork): Likewise.
* target-delegates.c: Re-generate.
Change-Id: If908c2f68b29fa275be2b0b9deb41e4c6a1b7879
|
|
I noticed that linux_nat_filter_event returns a value, but its caller
doesn't use it. This has been since 9c02b52532ac ("linux-nat.c: better
starvation avoidance, handle non-stop mode too"). Before that commit,
the return value was used to tell the caller whether to continue
processing that event or not. But since then, the model is that we pull
all events from the kernel and linux_nat_filter_event just saves the
status to the lwp_info structure if it thinks it's relevant. And the
caller, linux_nat_wait_1, selects a status at random amongst the threads
with a pending status. So essentially, the return value of
linux_nat_filter_event does not have a reason to be anymore. Change it
so it returns void.
gdb/ChangeLog:
* linux-nat.c (linux_nat_filter_event): Return void.
Change-Id: I35662868910f5122772ed92a512adfbf4da12d87
|
|
When running test-case gdb.threads/create-fail.exp on openSUSE Factory
(with glibc version 2.32) I run into:
...
(gdb) continue
Continuing.
[New Thread 0x7ffff7c83700 (LWP 626354)]
[New Thread 0x7ffff7482700 (LWP 626355)]
[Thread 0x7ffff7c83700 (LWP 626354) exited]
[New Thread 0x7ffff6c81700 (LWP 626356)]
[Thread 0x7ffff7482700 (LWP 626355) exited]
[New Thread 0x7ffff6480700 (LWP 626357)]
[Thread 0x7ffff6c81700 (LWP 626356) exited]
[New Thread 0x7ffff5c7f700 (LWP 626358)]
[Thread 0x7ffff6480700 (LWP 626357) exited]
pthread_create: 22: Invalid argument
Thread 6 "create-fail" received signal SIG32, Real-time event 32.
[Switching to Thread 0x7ffff5c7f700 (LWP 626358)]
0x00007ffff7d87695 in clone () from /lib64/libc.so.6
(gdb) FAIL: gdb.threads/create-fail.exp: iteration 1: run till end
...
The problem is that glibc-internal signal SIGCANCEL is not recognized by gdb.
There's code in check_thread_signals that is supposed to take care of that,
but it's not working because this code in lin_thread_get_thread_signals has
stopped working:
...
/* NPTL reserves the first two RT signals, but does not provide any
way for the debugger to query the signal numbers - fortunately
they don't change. */
sigaddset (set, __SIGRTMIN);
sigaddset (set, __SIGRTMIN + 1);
...
Since glibc commit d2dc5467c6 "Filter out NPTL internal signals (BZ #22391)"
(first released as part of glibc 2.28), a sigaddset with a glibc-internal
signal has no other effect than setting errno to EINVALID.
Fix this by eliminating the usage of sigset_t in check_thread_signals and
lin_thread_get_thread_signals.
The same problem was observed on Ubuntu 20.04.
Tested on x86_64-linux, openSUSE Factory.
Tested on aarch64-linux, Ubuntu 20.04 and Ubuntu 18.04.
gdb/ChangeLog:
2021-02-12 Tom de Vries <tdevries@suse.de>
PR threads/26228
* linux-nat.c (lin_thread_get_thread_signals): Remove.
(lin_thread_signals): New static var.
(lin_thread_get_thread_signal_num, lin_thread_get_thread_signal):
New function.
* linux-nat.h (lin_thread_get_thread_signals): Remove.
(lin_thread_get_thread_signal_num, lin_thread_get_thread_signal):
Declare.
* linux-thread-db.c (check_thread_signals): Use
lin_thread_get_thread_signal_num and lin_thread_get_thread_signal.
|
|
A following patch will add a testcase that has a number of threads
constantly stepping over a breakpoint, and then has GDB detach the
process. That testcase sometimes fails with the inferior crashing
with SIGTRAP after the detach because of the bug fixed by this patch,
when tested with the native target.
The problem is that target_detach removes breakpoints from the target
immediately, and that does not work with the native GNU/Linux target
(and probably no other native target) currently. The test wouldn't
fail with this issue when testing against gdbserver, because gdbserver
does allow accessing memory while the current thread is running, by
transparently pausing all threads temporarily, without GDB noticing.
Implementing that in gdbserver was a lot of work, so I'm not looking
forward right now to do the same in the native target. Instead, I
came up with a simpler solution -- push the breakpoints removal down
to the targets. The Linux target conveniently already pauses all
threads before detaching them, since PTRACE_DETACH only works with
stopped threads, so we move removing breakpoints to after that. Only
the remote and GNU/Linux targets support support async execution, so
no other target should really need this.
gdb/ChangeLog:
* linux-nat.c (linux_nat_target::detach): Remove breakpoints
here...
* remote.c (remote_target::remote_detach_1): ... and here ...
* target.c (target_detach): ... instead of here.
* target.h (target_ops::detach): Add comment.
|
|
I'm trying to enable clang's -Wmissing-variable-declarations warning.
This patch fixes all the obvious spots where we can simply add "static"
(at least, found when building on x86-64 Linux).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static.
* aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind,
aarch64_stub_unwind, aarch64_normal_base, ): Make static.
* arm-linux-tdep.c (arm_prologue_unwind): Make static.
* arm-tdep.c (struct frame_unwind): Make static.
* auto-load.c (auto_load_safe_path_vec): Make static.
* csky-tdep.c (csky_stub_unwind): Make static.
* gdbarch.c (gdbarch_data_registry): Make static.
* gnu-v2-abi.c (gnu_v2_abi_ops): Make static.
* i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static.
* i386-tdep.c (i386_frame_setup_skip_insns,
i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns):
Make static.
* infrun.c (observer_mode): Make static.
* linux-nat.c (sigchld_action): Make static.
* linux-thread-db.c (thread_db_list): Make static.
* maint-test-options.c (maintenance_test_options_list):
* mep-tdep.c (mep_csr_registers): Make static.
* mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name.
(stats): Make static.
* nat/linux-osdata.c (struct osdata_type): Make static.
* ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static.
* progspace.c (last_program_space_num): Make static.
* python/py-param.c (struct parm_constant): Remove struct type
name.
(parm_constants): Make static.
* python/py-record-btrace.c (btpy_list_methods): Make static.
* python/py-record.c (recpy_gap_type): Make static.
* record.c (record_goto_cmdlist): Make static.
* regcache.c (regcache_descr_handle): Make static.
* registry.h (DEFINE_REGISTRY): Make definition static.
* symmisc.c (std_in, std_out, std_err): Make static.
* top.c (previous_saved_command_line): Make static.
* tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make
static.
* unittests/command-def-selftests.c (nr_duplicates,
nr_invalid_prefixcmd, lists): Make static.
* unittests/observable-selftests.c (test_notification): Make
static.
* unittests/optional/assignment/1.cc (counter): Make static.
* unittests/optional/assignment/2.cc (counter): Make static.
* unittests/optional/assignment/3.cc (counter): Make static.
* unittests/optional/assignment/4.cc (counter): Make static.
* unittests/optional/assignment/5.cc (counter): Make static.
* unittests/optional/assignment/6.cc (counter): Make static.
gdbserver/ChangeLog:
* ax.cc (bytecode_address_table): Make static.
* debug.cc (debug_file): Make static.
* linux-low.cc (stopping_threads): Make static.
(step_over_bkpt): Make static.
* linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static.
* tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt,
alloced_trace_state_variables, trace_buffer_ctrl,
tracing_start_time, tracing_stop_time, tracing_user_name,
tracing_notes, tracing_stop_note): Make static.
Change-Id: Ic1d8034723b7802502bda23770893be2338ab020
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
The same pattern happens often to define a "debug_printf" macro:
#define displaced_debug_printf(fmt, ...) \
do \
{ \
if (debug_displaced) \
debug_prefixed_printf ("displaced", __func__, fmt, ##__VA_ARGS__); \
} \
while (0)
Move this pattern behind a helper macro, debug_prefixed_printf_cond and
update the existing macros to use it.
gdb/ChangeLog:
* displaced-stepping.h (displaced_debug_printf): Use
debug_prefixed_printf_cond.
* dwarf2/read.c (dwarf_read_debug_printf): Likewise.
(dwarf_read_debug_printf_v): Likewise.
* infrun.h (infrun_debug_printf): Likewise.
* linux-nat.c (linux_nat_debug_printf): Likewise.
gdbsupport/ChangeLog:
* common-debug.h (debug_prefixed_printf_cond): New.
* event-loop.h (event_loop_debug_printf): Use
debug_prefixed_printf_cond.
Change-Id: I1ff48b98b8d1cc405d1c7e8da8ceadf4e3a17f99
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
This partially reverts some parts of the commit:
commit 17417fb0ec9842de1774e1e76f1f11c00cdafc47
Date: Sat Oct 31 09:01:25 2020 -0400
gdb, gdbsupport: add debug_prefixed_printf, remove boilerplate functions
This commit removed 3 places where some debug flags were being
checked. The result was that debug tracing was being printed
unconditionally.
This commit adds back the 3 flag checks.
gdb/ChangeLog:
* infrun.h (infrun_debug_printf): Add check of debug_infrun flag.
(debug_prefixed_printf): Add check of debug_displaced flag.
* linux-nat.c (linux_nat_debug_printf): Add check of
debug_linux_nat flag.
|
|
The *_debug_print_1 functions are all very similar, the only difference
being the subsystem name. Remove them all and make the logging macros
use a new debug_prefixed_printf function directly.
gdb/ChangeLog:
* infrun.c (infrun_debug_printf_1): Remove.
(displaced_debug_printf_1): Remove.
(stop_all_threads): Use debug_prefixed_printf.
* infrun.h (infrun_debug_printf_1): Remove.
(infrun_debug_printf): Use debug_prefixed_printf.
(displaced_debug_printf_1): Remove.
(displaced_debug_printf): Use debug_prefixed_printf.
* linux-nat.c (linux_nat_debug_printf_1): Remove.
(linux_nat_debug_printf): Use debug_prefixed_printf.
gdbsupport/ChangeLog:
* common-debug.cc (debug_prefixed_printf): New.
* common-debug.h (debug_prefixed_printf): New declaration.
* event-loop.cc (event_loop_debug_printf_1): Remove.
* event-loop.h (event_loop_debug_printf_1): Remove.
(event_loop_debug_printf): Use debug_prefixed_printf.
(event_loop_ui_debug_printf): Use debug_prefixed_printf.
Change-Id: Ib323087c7257f0060121d302055c41eb64aa60c6
|
|
The following patch needs to output debug prints from gdbsupport code.
Move debug_prefixed_vprintf so that it is possible to use it from
gdbsupport.
gdb/ChangeLog:
* debug.c (debug_prefixed_vprintf): Move to gdbsupport.
* debug.h: Remove.
* infrun.c: Include gdbsupport/common-debug.h.
* linux-nat.c: Likewise.
gdbsupport/ChangeLog:
* common-debug.cc (debug_prefixed_vprintf): Move here.
* common-debug.h (debug_prefixed_vprintf): Move here.
Change-Id: I5170065fc10a7a49c0f1bba67c691decb2cf3bcb
|
|
Assign names to event loop file handlers. They will be used in debug
messages when file handlers are invoked.
In GDB, each UI used to get its own unique number, until commit
cbe256847e19 ("Remove ui::num"). Re-introduce this field, and use it to
make a unique name for the handler.
I'm not too sure what goes on in ser-base.c, all I know is that it's
what is used when debugging remotely. I've just named the main handler
"serial". It would be good to have unique names there too. For instance
when debugging with two different remote connections, we'd ideally want
the handlers to have unique names. I didn't do it in this patch though.
gdb/ChangeLog:
* async-event.c (initialize_async_signal_handlers): Pass name to
add_file_handler
* event-top.c (ui_register_input_event_handler): Likewise.
* linux-nat.c (linux_nat_target::async): Likewise.
* run-on-main-thread.c (_initialize_run_on_main_thread):
Likewise
* ser-base.c (reschedule): Likewise.
(ser_base_async): Likewise.
* tui/tui-io.c: Likewise.
* top.h (struct ui) <num>: New field.
* top.c (highest_ui_num): New variable.
(ui::ui): Initialize num.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::async): Pass name to
add_file_handler.
* remote-utils.cc (handle_accept_event): Likewise.
(remote_open): Likewise.
gdbsupport/ChangeLog:
* event-loop.h (add_file_handler): Add "name" parameter.
* event-loop.cc (struct file_handler) <name>: New field.
(create_file_handler): Add "name" parameter, assign it to file
handler.
(add_file_handler): Add "name" parameter.
Change-Id: I9f1545f73888ebb6778eb653a618ca44d105f92c
|
|
The do/while in these macros are not formatted with proper GNU style,
fix that.
gdb/ChangeLog:
* infrun.h (infrun_debug_printf): Fix formatting.
* linux-nat.c (linux_nat_debug_printf): Fix formatting.
Change-Id: I3a723663c76d9091f785941923c2b6cf67459629
|
|
This changes TARGET_WNOHANG to be a member of an enum, rather than a
define, and also adds a DEF_ENUM_FLAGS_TYPE for this type. Then, it
changes target_wait and the various target wait methods to use this
type rather than "int".
This didn't catch any bugs, but it seems like a decent cleanup
nevertheless.
I did not change deprecated_target_wait_hook, since that's only used
out-of-tree (by Insight), and there didn't seem to be a need.
I can't build some of these targets, so I modified them on a
best-effort basis. I don't think this patch should go in before the
release branch is made.
gdb/ChangeLog
2020-09-18 Tom Tromey <tromey@adacore.com>
* windows-nat.c (struct windows_nat_target) <wait>: Update.
(windows_nat_target::wait): Update.
* target/wait.h (enum target_wait_flag): New. Use
DEF_ENUM_FLAGS_TYPE.
* target/target.h (target_wait): Change type of options.
* target.h (target_options_to_string, default_target_wait):
Update.
(struct target_ops) <wait>: Change type of options.
* target.c (target_wait, default_target_wait, do_option): Change
type of "options".
(target_options_to_string): Likewise.
* target-delegates.c: Rebuild.
* target-debug.h (target_debug_print_target_wait_flags): Rename
from target_debug_print_options.
* sol-thread.c (class sol_thread_target) <wait>: Update.
(sol_thread_target::wait): Update.
* rs6000-nat.c (class rs6000_nat_target) <wait>: Update.
(rs6000_nat_target::wait): Update.
* remote.c (class remote_target) <wait, wait_ns, wait_as>:
Update.
(remote_target::wait_ns, remote_target::wait_as): Change type of
"options".
(remote_target::wait): Update.
* remote-sim.c (struct gdbsim_target) <wait>: Update.
(gdbsim_target::wait): Update.
* record-full.c (class record_full_base_target) <wait>: Update.
(record_full_wait_1): Change type of "options".
(record_full_base_target::wait): Update.
* record-btrace.c (class record_btrace_target) <wait>: Update.
(record_btrace_target::wait): Update.
* ravenscar-thread.c (struct ravenscar_thread_target) <wait>:
Update.
(ravenscar_thread_target::wait): Update.
* procfs.c (class procfs_target) <wait>: Update.
(procfs_target::wait): Update.
* obsd-nat.h (class obsd_nat_target) <wait>: Update.
* obsd-nat.c (obsd_nat_target::wait): Update.
* nto-procfs.c (struct nto_procfs_target) <wait>: Update.
(nto_procfs_target::wait): Update.
* nbsd-nat.h (struct nbsd_nat_target) <wait>: Update.
* nbsd-nat.c (nbsd_wait): Change type of "options".
(nbsd_nat_target::wait): Update.
* linux-thread-db.c (class thread_db_target) <wait>: Update.
(thread_db_target::wait): Update.
* linux-nat.h (class linux_nat_target) <wait>: Update.
* linux-nat.c (linux_nat_target::wait): Update.
(linux_nat_wait_1): Update.
* infrun.c (do_target_wait_1, do_target_wait): Change type of
"options".
* inf-ptrace.h (struct inf_ptrace_target) <wait>: Update.
* inf-ptrace.c (inf_ptrace_target::wait): Update.
* go32-nat.c (struct go32_nat_target) <wait>: Update.
(go32_nat_target::wait): Update.
* gnu-nat.h (struct gnu_nat_target) <wait>: Update.
* gnu-nat.c (gnu_nat_target::wait): Update.
* fbsd-nat.h (class fbsd_nat_target) <wait>: Update.
* fbsd-nat.c (fbsd_nat_target::wait): Update.
* darwin-nat.h (class darwin_nat_target) <wait>: Update.
* darwin-nat.c (darwin_nat_target::wait): Update.
* bsd-uthread.c (struct bsd_uthread_target) <wait>: Update.
(bsd_uthread_target::wait): Update.
* aix-thread.c (class aix_thread_target) <wait>: Update.
(aix_thread_target::wait): Update.
gdbserver/ChangeLog
2020-09-18 Tom Tromey <tromey@adacore.com>
* netbsd-low.h (class netbsd_process_target) <wait>: Update.
* netbsd-low.cc (netbsd_waitpid, netbsd_wait)
(netbsd_process_target::wait): Change type of target_options.
* win32-low.h (class win32_process_target) <wait>: Update.
* win32-low.cc (win32_process_target::wait): Update.
* target.h (class process_stratum_target) <wait>: Update.
(mywait): Update.
* target.cc (mywait, target_wait): Change type of "options".
* linux-low.h (class linux_process_target) <wait, wait_1>:
Update.
* linux-low.cc (linux_process_target::wait)
(linux_process_target::wait_1): Update.
|
|
target_ops::wait implementations should not rely on the value of
inferior_ptid on entry. While looking at another wait-related patch, I
noticed that the code in linux_nat_wait_1, checking for a newly created
process, did just that. This patch fixes it. Note that I didn't see
any bug, this "fix" is simply to make the function respect the
target_ops::wait contract.
Instead of checking inferior_ptid, check for the passed in `ptid`
value.
During startup, linux_nat_wait_1 gets called a few times with the
pid-only ptid, while startup_inferior waits for the expected number of
exec events. For this reason, I needed to add a `find_lwp_pid` call to
ensure that the actions of changing the main thread's ptid, and adding
the initial lwp, were done only once for a given process.
This was not needed before, since thread_change_ptid, through the
thread_ptid_changed observer, ends up changing inferior_ptid. So the
second time around, inferior_ptid was not a pid-only ptid.
That find_lwp_pid won't add much overhead, as it will only be called
when the ptid is a pid-only ptid. And AFAIK, that only happens during
inferior startup.
An alternative to that `find_lwp_pid` call might be to make
startup_inferior realize that the main thread has changed ptid, and make
it wait for the new ptid. But that doesn't look easy to do.
Regtested on amd64/Linux.
gdb/ChangeLog:
* linux-nat.c (linux_nat_wait_1): Don't use inferior_ptid when
checking for initial lwp.
Change-Id: I8f1d5c766f5cb2a29c948bc75fa4582d7130c23f
|
|
To help ensure that all debug statements have the same format, introduce
the debug_prefixed_vprintf helper. Implement linux_nat_debug_printf_1
and infrun_debug_printf_1 with it.
I would eventually like to style the module and function name with some
color, to help them stick out, but I don't really know how to do that
yet, it can always be done later.
gdb/ChangeLog:
* debug.h: New file.
* debug.c (debug_prefixed_vprintf): New function.
* infrun.c (infrun_debug_printf_1): Use debug_prefixed_vprintf.
* linux-nat.c (linux_nat_debug_printf_1): Likewise.
Change-Id: Iccc290a2dc6b5fffcbe1c2866ed8d804ad380764
|
|
The debug prints inside linux-nat.c almost all have a prefix that
indicate in which function they are located. This prefix is an
abbreviation of the function name. For example, this print is in the
`linux_nat_post_attach_wait` function:
if (debug_linux_nat)
fprintf_unfiltered (gdb_stdlog,
"LNPAW: Attaching to a stopped process\n");
Over time, the code has changed, things were moved, and many of these
prefixes are not accurate anymore. Also, unless you know the
linux-nat.c file by heart, it's a bit cryptic what LLR, LNW, RSRL, etc,
all mean.
To address both of these issues, I suggest adding this macro for
printing debug statements, which automatically includes the function
name. It also includes the `[linux-nat]` prefix to clarify which part
of GDB printed this (I think that, ideally, all debug prints would
include such a tag).
The `__func__` magic symbol is used to get the function name.
Unfortunately, in the case of methods, it only contains the method name,
not the class name. So we'll get "wait", where I would have liked to
get "linux_nat_target::wait". But at least with the `[linux-nat]` tag
in the front, it's not really ambiguous.
I've made the macro automatically include the trailing newline, because
it wouldn't make sense to call it twice to print two parts of one line,
the `[linux-nat]` tag would be printed in the middle.
An advantage of this (IMO) is that it's less verbose, we don't have to
check for `if (debug_linux_nat)` everywhere.
Another advantage is that it's easier to customize the output later,
without having to touch all call sites.
Here's an example of what it looks like in the end:
[linux-nat] linux_nat_wait_1: enter
[linux-nat] wait: [process -1], [TARGET_WNOHANG]
gdb/ChangeLog:
* linux-nat.c (linux_nat_debug_printf): New function.
(linux_nat_debug_printf_1): New macro. Use throughout the file.
Change-Id: Ifcea3255b91400d3ad093cd0b75d3fac241cb998
|
|
I noticed that my IDE was confusing the two stopped_pids variables.
There is one in GDB and one in GDBserver. They should be static, make
them so.
gdb/ChangeLog:
* linux-nat.c (stopped_pids): Make static.
gdbserver/ChangeLog:
* linux-low.cc (stopped_pids): Make static.
Change-Id: If4a2bdcd45d32eb3a732d266a0f686a4e4c23672
|
|
The "linux_multi_process" is initialized but never modified. I
discussed this with Pedro on irc, and he said that, while it was
useful when developing this feature, it is now no longer needed. So,
this removes it.
gdb/ChangeLog
2020-07-18 Tom Tromey <tom@tromey.com>
* linux-nat.c (linux_multi_process): Remove.
(linux_nat_target::supports_multi_process): Return true.
|
|
I noticed a couple of spots in linux-nat.c that use 0/1 where boolean
literals would be more idiomatic. This patch makes this change.
gdb/ChangeLog
2020-07-17 Tom Tromey <tromey@adacore.com>
* linux-nat.c (linux_nat_target::supports_non_stop)
(linux_nat_target::always_non_stop_p): Use "true".
(linux_nat_target::supports_disable_randomization): Use "true" and
"false".
|
|
I noticed that fetch_inferior_event receives the client_data parameter
from its caller, inferior_event_handler, but doesn't actually need it.
This patch removes it. In turn, inferior_event_handler doesn't use its
parameter, so remove it too.
The `data` argument used when registering
remote_async_inferior_event_handler is changed to NULL, to avoid
confusion. It could make people think that the value passed is used
somewhere, when in fact it's not.
gdb/ChangeLog:
* inf-loop.c (inferior_event_handler): Remove client_data param.
* inf-loop.h (inferior_event_handler): Likewise.
* infcmd.c (step_1): Adjust.
* infrun.c (proceed): Adjust.
(fetch_inferior_event): Remove client_data param.
(infrun_async_inferior_event_handler): Adjust.
* infrun.h (fetch_inferior_event): Remove `void *` param.
* linux-nat.c (handle_target_event): Adjust.
* record-btrace.c (record_btrace_handle_async_inferior_event):
Adjust.
* record-full.c (record_full_async_inferior_event_handler):
Adjust.
* remote.c (remote_async_inferior_event_handler): Adjust.
Change-Id: I3c2aa1eb0ea3e0985df096660d2dcd794674f2ea
|
|
This moves event-loop.[ch] to gdbsupport/ and updates the uses in gdb.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* run-on-main-thread.c: Update include.
* unittests/main-thread-selftests.c: Update include.
* tui/tui-win.c: Update include.
* tui/tui-io.c: Update include.
* tui/tui-interp.c: Update include.
* tui/tui-hooks.c: Update include.
* top.h: Update include.
* top.c: Update include.
* ser-base.c: Update include.
* remote.c: Update include.
* remote-notif.c: Update include.
* remote-fileio.c: Update include.
* record-full.c: Update include.
* record-btrace.c: Update include.
* python/python.c: Update include.
* posix-hdep.c: Update include.
* mingw-hdep.c: Update include.
* mi/mi-main.c: Update include.
* mi/mi-interp.c: Update include.
* main.c: Update include.
* linux-nat.c: Update include.
* interps.c: Update include.
* infrun.c: Update include.
* inf-loop.c: Update include.
* event-top.c: Update include.
* event-loop.c: Move to ../gdbsupport/.
* event-loop.h: Move to ../gdbsupport/.
* async-event.h: Update include.
* Makefile.in (COMMON_SFILES, HFILES_NO_SRCDIR): Update.
gdbsupport/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* event-loop.h: Move from ../gdb/.
* event-loop.cc: Move from ../gdb/.
|
|
This patch adds a low_new_clone method to linux_nat_target, called after
a PTRACE_EVENT_CLONE is detected, similar to how low_new_fork is called
after PTRACE_EVENT_(V)FORK.
This is useful for targets that need to copy state associated with a
thread that is inherited across clones.
gdb/ChangeLog:
2020-03-30 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-nat.h (low_new_clone): New method.
* linux-nat.c (linux_handle_extended_wait): Call low_new_clone.
|
|
Change parameters and return value of the various follow_fork
functions/methods from int to bool.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_nat_target::follow_fork): Change bool to int.
* fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
* inf-ptrace.c (inf_ptrace_target::follow_fork): Likewise.
* inf-ptrace.h (struct inf_ptrace_target) <follow_fork>: Likewise.
* infrun.c (follow_fork): Likewise.
(follow_fork_inferior): Likewise.
* linux-nat.c (linux_nat_target::follow_fork): Likewise.
* linux-nat.h (class linux_nat_target): Likewise.
* remote.c (class remote_target) <follow_fork>: Likewise.
(remote_target::follow_fork): Likewise.
* target-delegates.c: Re-generate.
* target.c (default_follow_fork): Likewise.
(target_follow_fork): Likewise.
* target.h (struct target_ops) <follow_fork>: Likewise.
(target_follow_fork): Likewise.
|
|
This removes ui_file_isatty, ui_file_read, ui_file_write,
ui_file_write_async_safe, ui_file_flush, and ui_file_puts, replacing
them with calls to the appropriate method instead.
gdb/ChangeLog
2020-02-11 Tom Tromey <tromey@adacore.com>
* remote.c (remote_console_output): Update.
* printcmd.c (printf_command): Update.
* event-loop.c (gdb_wait_for_event): Update.
* linux-nat.c (sigchld_handler): Update.
* remote-sim.c (gdb_os_write_stdout): Update.
(gdb_os_flush_stdout): Update.
(gdb_os_flush_stderr): Update.
(gdb_os_write_stderr): Update.
* exceptions.c (print_exception): Update.
* remote-fileio.c (remote_fileio_func_read): Update.
(remote_fileio_func_write): Update.
* tui/tui.c (tui_enable): Update.
* tui/tui-interp.c (tui_interp::init): Update.
* utils.c (init_page_info): Update.
(putchar_unfiltered, fputc_unfiltered): Update.
(gdb_flush): Update.
(emit_style_escape): Update.
(flush_wrap_buffer, fputs_maybe_filtered): Update.
* ui-file.c (ui_file_isatty, ui_file_read, ui_file_write)
(ui_file_write_async_safe, ui_file_flush, ui_file_puts): Remove.
(stderr_file::write): Update.
(stderr_file::puts): Update.
* ui-file.h (ui_file_isatty, ui_file_write)
(ui_file_write_async_safe, ui_file_read, ui_file_flush)
(ui_file_puts): Don't declare.
Change-Id: I3ca9b36e9107f6adbc41e014f5078b41d6bcec4d
|
|
Switch thread_info::resumed to bool (thread_info::executing already is a bool),
and try to change everything more or less related to that to consistently use
true/false instead of 1/0.
gdb/ChangeLog:
* fork-child.c (gdb_startup_inferior): Use bool instead of int.
* gdbthread.h (class thread_info) <resumed>: Likewise.
* infrun.c (resume_1): Likewise.
(proceed): Likewise.
(infrun_thread_stop_requested): Likewise.
(stop_all_threads): Likewise.
(handle_inferior_event): Likewise.
(restart_threads): Likewise.
(finish_step_over): Likewise.
(keep_going_stepped_thread): Likewise.
* linux-nat.c (attach_proc_task_lwp_callback): Likewise.
(linux_handle_extended_wait): Likewise.
* record-btrace.c (get_thread_current_frame_id): Likewise.
* record-full.c (record_full_wait_1): Likewise.
* remote.c (remote_target::process_initial_stop_replies): Likewise.
* target.c (target_resume): Likewise.
* thread.c (set_running_thread): Likewise.
|
|
While doing some investigation of mine, i noticed a few typos,
inaccuracies and missing information.
I went ahead and updated/improved those.
gdb/ChangeLog:
2020-01-14 Luis Machado <luis.machado@linaro.org>
* inf-ptrace.c (inf_ptrace_target::resume): Update comments.
* infrun.c (resume_1): Likewise.
(handle_inferior_event): Remove stale comment.
* linux-nat.c (linux_nat_target::resume): Update comments.
(save_stop_reason): Likewise.
(linux_nat_filter_event): Likewise.
* linux-nat.h (struct lwp_info) <stop_pc>, <stop_reason>: Likewise.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
|
|
- Make get_last_target_status arguments optional. A following patch
will add another argument to get_last_target_status (the event's
target), and passing nullptr when we don't care for some piece of
info is handier than creating dummy local variables.
- Declare nullify_last_target_wait_ptid in a header, and remove the
local extern declaration from linux-fork.c.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* break-catch-sig.c (signal_catchpoint_print_it): Don't pass a
ptid to get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Don't pass a
ptid to get_last_target_status.
* infcmd.c (continue_command): Don't pass a target_waitstatus to
get_last_target_status.
(info_program_command): Don't pass a target_waitstatus to
get_last_target_status.
* infrun.c (init_wait_for_inferior): Use
nullify_last_target_wait_ptid.
(get_last_target_status): Handle nullptr arguments.
(nullify_last_target_wait_ptid): Clear target_last_waitstatus.
(print_stop_event): Don't pass a ptid to get_last_target_status.
(normal_stop): Don't pass a ptid to get_last_target_status.
* infrun.h (get_last_target_status, set_last_target_status): Move
comments here and update.
(nullify_last_target_wait_ptid): Declare.
* linux-fork.c (fork_load_infrun_state): Remove local extern
declaration of nullify_last_target_wait_ptid.
* linux-nat.c (get_detach_signal): Don't pass a target_waitstatus
to get_last_target_status.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This adds configury support and an RAII class that can be used to
temporarily block signals that are used by gdb. (This class is not
used in this patch, but it split out for easier review.)
The idea of this patch is that these signals should only be delivered
to the main thread. So, when creating a background thread, they are
temporarily blocked; the blocked state is inherited by the new thread.
The sigprocmask man page says:
The use of sigprocmask() is unspecified in a multithreaded
process; see pthread_sigmask(3).
This patch changes gdb to use pthread_sigmask when appropriate, by
introducing a convenience define.
I've updated gdbserver as well, because I had to touch gdbsupport, and
because the threading patches will make it link against the thread
library.
I chose not to touch the NTO code, because I don't know anything about
that platform and because I cannot test it.
Finally, this modifies an existing spot in the Guile layer to use the
new facility.
gdb/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* gdbsupport/signals-state-save-restore.c (original_signal_mask):
Remove comment.
(save_original_signals_state, restore_original_signals_state): Use
gdb_sigmask.
* linux-nat.c (block_child_signals, restore_child_signals_mask)
(_initialize_linux_nat): Use gdb_sigmask.
* guile/guile.c (_initialize_guile): Use block_signals.
* Makefile.in (HFILES_NO_SRCDIR): Add gdb-sigmask.h.
* gdbsupport/gdb-sigmask.h: New file.
* event-top.c (async_sigtstp_handler): Use gdb_sigmask.
* cp-support.c (gdb_demangle): Use gdb_sigmask.
* gdbsupport/common.m4 (GDB_AC_COMMON): Check for
pthread_sigmask.
* configure, config.in: Rebuild.
* gdbsupport/block-signals.h: New file.
gdb/gdbserver/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* remote-utils.c (block_unblock_async_io): Use gdb_sigmask.
* linux-low.c (linux_wait_for_event_filtered, linux_async): Use
gdb_sigmask.
* configure, config.in: Rebuild.
Change-Id: If3f37dc57dd859c226e9e4d79458a0514746e8c6
|
|
This provides threadsafety. Unfortunately, since libinproctrace.so
does not link to gnulib, we can't use it there, especially since it
still includes the gnulib headers (so it is difficult to directly
call the system strerror_r).
gdb/ChangeLog:
2019-11-26 Christian Biesinger <cbiesinger@google.com>
* linux-nat.c (detach_one_lwp): Call safe_strerror instead of
strerror.
* nto-procfs.c (nto_procfs_target::create_inferior): Likewise.
* windows-nat.c (windows_nat_target::create_inferior): Likewise.
gdb/gdbserver/ChangeLog:
2019-11-26 Christian Biesinger <cbiesinger@google.com>
* debug.c (debug_set_output): Call safe_strerror instead of
strerror.
* linux-low.c (attach_proc_task_lwp_callback): Likewise.
(linux_kill_one_lwp): Likewise.
(linux_detach_one_lwp): Likewise.
(linux_wait_for_event_filtered): Likewise.
(store_register): Likewise.
* lynx-low.c (lynx_attach): Likewise.
* mem-break.c (insert_memory_breakpoint): Likewise.
(remove_memory_breakpoint): Likewise.
(delete_fast_tracepoint_jump): Likewise.
(set_fast_tracepoint_jump): Likewise.
(uninsert_fast_tracepoint_jumps_at): Likewise.
(reinsert_fast_tracepoint_jumps_at): Likewise.
* nto-low.c (nto_xfer_memory): Likewise.
(nto_resume): Likewise.
Change-Id: I9e259cdcaa6e11bbcc4ee6bdc5b7127d73e11abe
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* aarch64-linux-tdep.c: Fix typos in comments.
* aarch64-tdep.c: Same.
* ada-lang.c: Same.
* amd64-nat.c: Same.
* arc-tdep.c: Same.
* arch/aarch64-insn.c: Same.
* block.c: Same.
* breakpoint.h: Same.
* btrace.h: Same.
* c-varobj.c: Same.
* cli/cli-decode.c: Same.
* cli/cli-script.c: Same.
* cli/cli-utils.h: Same.
* coff-pe-read.c: Same.
* coffread.c: Same.
* compile/compile-cplus-symbols.c: Same.
* compile/compile-object-run.c: Same.
* completer.c: Same.
* corelow.c: Same.
* cp-support.c: Same.
* demangle.c: Same.
* dwarf-index-write.c: Same.
* dwarf2-frame.c: Same.
* dwarf2-frame.h: Same.
* eval.c: Same.
* frame-base.h: Same.
* frame.h: Same.
* gdbcmd.h: Same.
* gdbtypes.h: Same.
* gnu-nat.c: Same.
* guile/scm-objfile.c: Same.
* i386-tdep.c: Same.
* i386-tdep.h: Same.
* infcall.c: Same.
* infcall.h: Same.
* linux-nat.c: Same.
* m68k-tdep.c: Same.
* macroexp.c: Same.
* memattr.c: Same.
* mi/mi-cmd-disas.c: Same.
* mi/mi-getopt.h: Same.
* mi/mi-main.c: Same.
* minsyms.c: Same.
* nat/aarch64-sve-linux-sigcontext.h: Same.
* objfiles.h: Same.
* ppc-linux-nat.c: Same.
* ppc-linux-tdep.c: Same.
* ppc-tdep.h: Same.
* progspace.h: Same.
* prologue-value.h: Same.
* python/py-evtregistry.c: Same.
* python/py-instruction.h: Same.
* record-btrace.c: Same.
* record-full.c: Same.
* remote.c: Same.
* rs6000-tdep.c: Same.
* ser-tcp.c: Same.
* sol-thread.c: Same.
* sparc-sol2-tdep.c: Same.
* sparc64-tdep.c: Same.
* stabsread.c: Same.
* symfile.c: Same.
* symtab.h: Same.
* target.c: Same.
* tracepoint.c: Same.
* tui/tui-data.h: Same.
* tui/tui-io.c: Same.
* tui/tui-win.c: Same.
* tui/tui.c: Same.
* unittests/rsp-low-selftests.c: Same.
* user-regs.h: Same.
* utils.c: Same.
* utils.h: Same.
* valarith.c: Same.
* valops.c: Same.
* valprint.c: Same.
* valprint.h: Same.
* value.c: Same.
* value.h: Same.
* varobj.c: Same.
* x86-nat.h: Same.
* xtensa-tdep.c: Same.
gdb/gdbserver/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* linux-aarch64-low.c: Fix typos in comments.
* linux-arm-low.c: Same.
* linux-low.c: Same.
* linux-ppc-low.c: Same.
* proc-service.c: Same.
* regcache.h: Same.
* server.c: Same.
* tracepoint.c: Same.
* win32-low.c: Same.
gdb/stubs/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* ia64vms-stub.c: Fix typos in comments.
* m32r-stub.c: Same.
* m68k-stub.c: Same.
* sh-stub.c: Same.
gdb/testsuite/ChangeLog:
2019-10-26 Tom de Vries <tdevries@suse.de>
* gdb.base/bigcore.c: Fix typos in comments.
* gdb.base/ctf-ptype.c: Same.
* gdb.base/long_long.c: Same.
* gdb.dwarf2/dw2-op-out-param.S: Same.
* gdb.python/py-evthreads.c: Same.
* gdb.reverse/i387-stack-reverse.c: Same.
* gdb.trace/tfile.c: Same.
* lib/compiler.c: Same.
* lib/compiler.cc: Same.
Change-Id: I8573d84a577894270179ae30f46c48d806fc1beb
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-18 Tom de Vries <tdevries@suse.de>
* aarch64-tdep.c: Fix typos in comments.
* ada-lang.c: Same.
* ada-tasks.c: Same.
* alpha-tdep.c: Same.
* alpha-tdep.h: Same.
* amd64-nat.c: Same.
* amd64-windows-tdep.c: Same.
* arc-tdep.c: Same.
* arc-tdep.h: Same.
* arch-utils.c: Same.
* arm-nbsd-tdep.c: Same.
* arm-tdep.c: Same.
* ax-gdb.c: Same.
* blockframe.c: Same.
* btrace.c: Same.
* c-varobj.c: Same.
* coff-pe-read.c: Same.
* coffread.c: Same.
* cris-tdep.c: Same.
* darwin-nat.c: Same.
* dbxread.c: Same.
* dcache.c: Same.
* disasm.c: Same.
* dtrace-probe.c: Same.
* dwarf-index-write.c: Same.
* dwarf2-frame-tailcall.c: Same.
* dwarf2-frame.c: Same.
* dwarf2read.c: Same.
* eval.c: Same.
* exceptions.c: Same.
* fbsd-tdep.c: Same.
* findvar.c: Same.
* frame.c: Same.
* frv-tdep.c: Same.
* gnu-v3-abi.c: Same.
* go32-nat.c: Same.
* h8300-tdep.c: Same.
* hppa-tdep.c: Same.
* i386-linux-tdep.c: Same.
* i386-tdep.c: Same.
* ia64-libunwind-tdep.c: Same.
* ia64-tdep.c: Same.
* infcmd.c: Same.
* infrun.c: Same.
* linespec.c: Same.
* linux-nat.c: Same.
* linux-thread-db.c: Same.
* machoread.c: Same.
* mdebugread.c: Same.
* mep-tdep.c: Same.
* mn10300-tdep.c: Same.
* namespace.c: Same.
* objfiles.c: Same.
* opencl-lang.c: Same.
* or1k-tdep.c: Same.
* osabi.c: Same.
* ppc-linux-nat.c: Same.
* ppc-linux-tdep.c: Same.
* ppc-sysv-tdep.c: Same.
* printcmd.c: Same.
* procfs.c: Same.
* record-btrace.c: Same.
* record-full.c: Same.
* remote-fileio.c: Same.
* remote.c: Same.
* rs6000-tdep.c: Same.
* s12z-tdep.c: Same.
* score-tdep.c: Same.
* ser-base.c: Same.
* ser-go32.c: Same.
* skip.c: Same.
* sol-thread.c: Same.
* solib-svr4.c: Same.
* solib.c: Same.
* source.c: Same.
* sparc-nat.c: Same.
* sparc-sol2-tdep.c: Same.
* sparc-tdep.c: Same.
* sparc64-tdep.c: Same.
* stabsread.c: Same.
* stack.c: Same.
* symfile.c: Same.
* symtab.c: Same.
* target-descriptions.c: Same.
* target-float.c: Same.
* thread.c: Same.
* utils.c: Same.
* valops.c: Same.
* valprint.c: Same.
* value.c: Same.
* varobj.c: Same.
* windows-nat.c: Same.
* xcoffread.c: Same.
* xstormy16-tdep.c: Same.
* xtensa-tdep.c: Same.
Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4
|
|
It was observed that in a multi-threaded application on GNU/Linux,
that if the user has set the SIGSTOP to be pass (using GDB's handle
command) then the inferior would hang upon hitting a breakpoint.
What happens is that when a thread hits the breakpoint GDB tries to
stop all of the other threads by sending them a SIGSTOP and setting
the stop_requested flag in the target_ops structure - this can be seen
in infrun.c:stop_all_threads.
GDB then waits for all of the other threads to stop.
When the SIGSTOP event arrives we eventually end up in
linux-nat.c:linux_nat_filter_event, which has the job of deciding if
the event we're looking at (the SIGSTOP arriving in this case) is
something that should be reported back to the core of GDB.
One of the final actions of this function is to check if we stopped
due to a signal, and if we did, and the signal has been set to 'pass'
by the user then we ignore the event and resume the thread.
This code already has some conditions in place that mean the event is
reported to GDB even if the signal is in the set of signals to be
passed to the inferior.
In this commit I extend this condition such that:
If the signal is a SIGSTOP, and the thread's stop_requested flag is
set (indicating we're waiting for the thread to stop with a SIGSTOP)
then we should report this SIGSTOP to GDB and not pass it to the
inferior.
With this change in place the test now passes. Regression tested on
x86-64 GNU/Linux with no regressions.
gdb/ChangeLog:
* linux-nat.c (linux_nat_filter_event): Don't ignore SIGSTOP if we
have just sent the thread a SIGSTOP and are waiting for it to
arrive.
gdb/testsuite/ChangeLog:
* gdb.threads/stop-with-handle.c: New file.
* gdb.threads/stop-with-handle.exp: New file.
|
|
This reverts commit 381beca6146ac68b57edf47d28cdb335fbd11635.
The patch hasn't been fully reviewed yet, and Pedro would like to see
more fixes.
|
|
In Fedora GDB, we carry the following patch:
https://src.fedoraproject.org/rpms/gdb/blob/8ac06474ff1e2aa4920d14e0666b083eeaca8952/f/gdb-attach-fail-reasons-5of5.patch
Its purpose is to try to detect a specific scenario where SELinux's
'deny_ptrace' option is enabled, which prevents GDB from ptrace'ing in
order to debug the inferior (PTRACE_ATTACH and PTRACE_TRACEME will
fail with EACCES in this case).
I like the idea of improving error detection and providing more
information to the user (a simple "Permission denied" can be really
frustrating), but I don't fully agree with the way the patch was
implemented: it makes GDB link against libselinux only for the sake of
consulting the 'deny_ptrace' setting, and then prints a warning if
ptrace failed and this setting is on.
My first thought (and attempt) was to make GDB print a generic warning
when a ptrace error happened; this message would just point the user
to our documentation, where she could find more information about
possible causes for the error (and try to diagnose/fix the problem).
This proved to be too simple, and I was convinced that it is actually
a good idea to go the extra kilometre and try to pinpoint the specific
problem (or problems) preventing ptrace from working, as well as
provide useful suggestions on how the user can fix things.
Here is the patch I came up with. It implements a new function,
'linux_ptrace_restricted_fail_reason', which does a few things to
check what's wrong with ptrace:
- It dlopen's "libselinux.so.1" and checks if the "deny_ptrace"
option is enabled.
- It reads the contents of "/proc/sys/kernel/yama/ptrace_scope" and
checks if it's different than 0.
For each of these checks, if it succeeds, the user will see a message
informing about the restriction in place, and how it can be disabled.
For example, if "deny_ptrace" is enabled, the user will see:
# gdb /usr/bin/true
...
Starting program: /usr/bin/true
warning: Could not trace the inferior process.
warning: ptrace: Permission denied
The SELinux 'deny_ptrace' option is enabled and preventing GDB
from using 'ptrace'. You can disable it by executing (as root):
setsebool deny_ptrace off
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
During startup program exited with code 127.
(gdb)
In case "/proc/sys/kernel/yama/ptrace_scope" is > 0:
# gdb /usr/bin/true
...
Starting program: /usr/bin/true
warning: Could not trace the inferior process.
warning: ptrace: Operation not permitted
The Linux kernel's Yama ptrace scope is in effect, which can prevent
GDB from using 'ptrace'. You can disable it by executing (as root):
echo 0 > /proc/sys/kernel/yama/ptrace_scope
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
During startup program exited with code 127.
(gdb)
If both restrictions are enabled, both messages will show up.
This works for gdbserver as well, and actually fixes a latent bug I
found: when ptrace is restricted, gdbserver would hang due to an
unchecked ptrace call:
# gdbserver :9988 /usr/bin/true
gdbserver: linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: Operation not permitted
gdbserver: linux_ptrace_test_ret_to_nx: status 256 is not WIFSTOPPED!
gdbserver: linux_ptrace_test_ret_to_nx: failed to kill child pid 2668100 No such process
[ Here you would have to issue a C-c ]
Now, you will see:
# gdbserver :9988 /usr/bin/true
gdbserver: linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: Permission denied
gdbserver: linux_ptrace_test_ret_to_nx: status 256 is not WIFSTOPPED!
gdbserver: linux_ptrace_test_ret_to_nx: failed to kill child pid 2766868 No such process
gdbserver: Could not trace the inferior process.
gdbserver: ptrace: Permission denied
The SELinux 'deny_ptrace' option is enabled and preventing GDB
from using 'ptrace'. You can disable it by executing (as root):
setsebool deny_ptrace off
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
#
(I decided to keep all the other messages, even though I find them a
bit distracting).
If GDB can't determine the cause for the failure, it will still print
the generic error message which tells the user to check our
documentation:
There might be restrictions preventing ptrace from working. Please see
the appendix "Linux kernel ptrace restrictions" in the GDB documentation
for more details.
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
This means that the patch expands our documentation and creates a new
appendix section named "Linux kernel ptrace restrictions", with
sub-sections for each possible restriction that might be in place.
Notice how, on every message, we instruct the user to "do the right
thing" if gdbserver is being used. This is because if the user
started gdbserver *before* any ptrace restriction was in place, and
then, for some reason, one or more restrictions get enabled, then the
error message will be displayed both on gdbserver *and* on the
connected GDB. Since the user will be piloting GDB, it's important to
explicitly say that the ptrace restrictions are enabled in the target,
where gdbserver is running.
The current list of possible restrictions is:
- SELinux's 'deny_ptrace' option (detected).
- YAMA's /proc/sys/kernel/yama/ptrace_scope setting (detected).
- seccomp on Docker containers (I couldn't find how to detect).
It's important to mention that all of this is Linux-specific; as far
as I know, SELinux, YAMA and seccomp are Linux-only features.
I tested this patch locally, on my Fedora 30 machine (actually, a
Fedora Rawhide VM), but I'm not proposing a testcase for it because of
the difficulty of writing one.
WDYT?
gdb/doc/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Linux kernel ptrace restrictions): New appendix
section.
gdb/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbsupport/gdb-dlfcn.h (gdb_dlopen): Update comment and
mention that the function throws an error.
* inf-ptrace.c (default_inf_ptrace_me_fail_reason): New
function.
(inf_ptrace_me_fail_reason): New variable.
(inf_ptrace_me): Update call to 'trace_start_error_with_name'.
* inf-ptrace.h (inf_ptrace_me_fail_reason): New variable.
* linux-nat.c (attach_proc_task_lwp_callback): Call
'linux_ptrace_attach_fail_reason_lwp'.
(linux_nat_target::attach): Update call to
'linux_ptrace_attach_fail_reason'.
(_initialize_linux_nat): Set 'inf_ptrace_me_fail_reason'.
* nat/fork-inferior.c (trace_start_error_with_name): Add
optional 'append' argument.
* nat/fork-inferior.h (trace_start_error_with_name): Update
prototype.
* nat/linux-ptrace.c: Include "gdbsupport/gdb-dlfcn.h",
"gdbsupport/filestuff.h" and "nat/fork-inferior.h".
(selinux_ftype): New typedef.
(linux_ptrace_restricted_fail_reason): New function.
(linux_ptrace_attach_fail_reason_1): New function.
(linux_ptrace_attach_fail_reason): Change first argument type
from 'ptid_t' to 'pid_t'. Call
'linux_ptrace_attach_fail_reason_1' and
'linux_ptrace_restricted_fail_reason'.
(linux_ptrace_attach_fail_reason_lwp): New function.
(linux_ptrace_me_fail_reason): New function.
(errno_pipe): New variable.
(linux_fork_to_function): Initialize pipe before forking.
(linux_child_function): Deal with errno-passing from child.
Handle ptrace error.
(linux_check_child_ptrace_errno): New function.
(linux_check_child_ptrace_errno): Call
'linux_check_child_ptrace_errno'.
* nat/linux-ptrace.h (linux_ptrace_attach_fail_reason): Update
prototype.
(linux_ptrace_attach_fail_reason_lwp): New prototype.
(linux_ptrace_me_fail_reason): New prototype.
* remote.c (extended_remote_target::attach): Handle error
message passed by the server when attach fails.
gdb/gdbserver/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (linux_ptrace_fun): Call
'linux_ptrace_me_fail_reason'.
(attach_proc_task_lwp_callback): Call
'linux_ptrace_attach_fail_reason_lwp'.
(linux_attach): Call 'linux_ptrace_attach_fail_reason'.
* server.c (handle_v_attach): Use try..catch when calling
'attach_inferior', and send an error message to the client
when needed.
* thread-db.c (attach_thread): Call
'linux_ptrace_attach_fail_reason_lwp'.
|
|
This patch implements removal of Cell/B.E. support, including
- Support for the spu-*-* target
- Support for native stand-alone SPU debugging
- Support for integrated debugging of combined PPU/SPU applications
- Remote debugging (gdbserver) support for all the above.
The patch also removes the TARGET_OBJECT_SPU target object type,
as this is available only on Cell/B.E. targets, including
- Native Linux support
- Core file support (including core file generation)
- Remote target support, including removal of the qXfer:spu:read
and qXfer:spu:write remote protocal packets and associated
support in gdbserver.
gdb/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: Mention that Cell/B.E. debugging support was removed.
* MAINTAINERS: Remove spu target.
* config/djgpp/fnchange.lst: Remove entries for removed files.
* Makefile.in (ALL_TARGET_OBS): Remove solib-spu.o,
spu-multiarch.o, and spu-tdep.o.
(HFILES_NO_SRCDIR): Remove solib-spu.h and spu-tdep.h.
(ALLDEPFILES): Remove solib-spu.c, spu-linux-nat.c,
spu-multiarch.c, and spu-tdep.c.
* spu-linux-nat.c: Remove file.
* spu-multiarch.c: Remove file.
* spu-tdep.c: Remove file.
* spu-tdep.h: Remove file.
* solib-spu.c: Remove file.
* solib-spu.h: Remove file.
* configure.host (powerpc64*-*-linux*): Remove Cell/B.E. support.
* configure.nat (spu-linux): Remove.
* configure.tgt (powerpc*-*-linux*): Remove solib-spu.o and
solib-multiarch.o from gdb_target_obs.
(spu*-*-*): Remove.
* arch/ppc-linux-common.h (struct ppc_linux_features): Remove "cell"
feature flag.
(ppc_linux_no_features): Update.
* arch/ppc-linux-common.c (ppc_linux_match_description): Remove
Cell/B.E. support.
* arch/ppc-linux-tdesc.h (tdesc_powerpc_cell32l): Remove declaration.
(tdesc_powerpc_cell64l): Likewise.
* nat/ppc-linux.h (PPC_FEATURE_CELL): Remove.
* ppc-linux-nat.c (ppc_linux_nat_target::read_description): Remove
Cell/B.E. support.
* ppc-linux-tdep.h: Do not include "solib-spu.h" or "spu-tdep.h".
Do not include "features/rs6000/powerpc-cell32l.c" or
"features/rs6000/powerpc-cell64l.c".
(ppc_linux_spu_section): Remove.
(ppc_linux_core_read_description): Remove Cell/B.E. support.
(spe_context_objfile, spe_context_lm_addr, spe_context_offset,
spe_context_cache_ptid, spe_context_cache_ptid): Remove.
(ppc_linux_spe_context_lookup): Remove.
(ppc_linux_spe_context_inferior_created): Remove.
(ppc_linux_spe_context_solib_loaded): Remove.
(ppc_linux_spe_context_solib_unloaded): Remove.
(ppc_linux_spe_context): Remove.
(struct ppu2spu_cache): Remove.
(ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register): Remove.
(struct ppu2spu_data): Remove.
(ppu2spu_unwind_register, ppu2spu_sniffer, ppu2spu_dealloc_cache,
ppu2spu_unwind): Remove.
(ppc_linux_init_abi): Remove Cell/B.E. support.
* rs6000-tdep.h (rs6000_gdbarch_init): Remove Cell/B.E. support.
* features/Makefile (rs6000/powerpc-cell32l-expedite): Remove.
(rs6000/powerpc-cell64l-expedite): Likewise
(WHICH): Remove rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
(XMLTOC): Remove rs6000/powerpc-cell32l.xml and
rs6000/powerpc-cell64l.xml.
* features/rs6000/powerpc-cell32l.xml: Remove.
* features/rs6000/powerpc-cell64l.xml: Likewise.
* features/rs6000/powerpc-cell32l.c: Remove generated file.
* features/rs6000/powerpc-cell64l.c: Likewise.
* regformats/rs6000/powerpc-cell32l.dat: Remove generated file.
* regformats/rs6000/powerpc-cell64l.dat: Likewise.
* regformats/reg-spu.dat: Remove.
* target.h (enum target_object): Remove TARGET_OBJECT_SPU.
* corelow.c (struct spuid_list): Remove.
(add_to_spuid_list): Remove.
(core_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* remote.c (PACKET_qXfer_spu_read, PACKET_qXfer_spu_write): Remove.
(remote_protocol_features): Remove associated entries.
(_initialize_remote): No longer initialize them.
(remote_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* linux-nat.c (SPUFS_MAGIC): Remove.
(linux_proc_xfer_spu): Remove.
(spu_enumerate_spu_ids): Remove.
(linux_nat_target::xfer_partial): Remove support for TARGET_OBJECT_SPU.
* linux-tdep.c (-linux_spu_make_corefile_notes): Remove.
(linux_make_corefile_notes): No longer call it.
* regcache.c (cooked_read_test): Remove bfd_arch_spu special case.
(cooked_write_test): Likewise.
gdb/doc/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* doc/gdb.texinfo (Remote Configuration): Remove documentation for
qXfer:spu:read and qXfer:spu:write.
(General Query Packets): Likewise.
(Cell Broadband Engine SPU architecture): Remove subsection.
gdb/gdbserver/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Remove powerpc-cell32l-ipa.o
and powerpc-cell64l-ipa.o.
(powerpc*-*-linux*): Remove powerpc-cell32l.o and powerpc-cell64l.o
from srv_regobj. Remove rs6000/powerpc-cell32l.xml and
rs6000/powerpc-cell64l.xml from srv_xmlfiles.
(spu*-*-*): Remove.
* spu-low.c: Remove file.
* linux-ppc-low.c (INSTR_SC, NR_spu_run): Remove.
(parse_spufs_run): Remove.
(ppc_get_pc): Remove Cell/B.E. support.
(ppc_set_pc): Likewise.
(ppc_breakpoint_at): Likewise.
(ppc_arch_setup): Likewise.
(ppc_get_ipa_tdesc_idx): Do not handle tdesc_powerpc_cell64l or
tdesc_powerpc_cell32l.
(initialize_low_arch): Do not call init_registers_powerpc_cell64l
or init_registers_powerpc_cell32l.
* linux-ppc-ipa.c (get_ipa_tdesc): Do not handle PPC_TDESC_CELL.
(initialize_low_tracepoint): Do not call init_registers_powerpc_cell64l
or init_registers_powerpc_cell32l.
* linux-ppc-tdesc-init.h (PPC_TDESC_CELL): Mark as unused.
(init_registers_powerpc_cell32l): Remove prototype.
(init_registers_powerpc_cell64l): Likewise.
* target.h (struct target_ops): Remove qxfer_spu member.
* server.c (handle_qxfer_spu): Remove.
(qxfer_packets): Remove entry for "spu".
(handle_query): No longer support qXfer:spu:read or qXfer:spu:write.
* linux-low.c (SPUFS_MAGIC): Remove.
(spu_enumerate_spu_ids): Remove.
(linux_qxfer_spu): Remove.
(linux_target_ops): Remove qxfer_spu member.
* lynx-low.c (lynx_target_ops): Remove qxfer_spu member.
* nto-low.c (nto_target_ops): Remove qxfer_spu member.
* win32-low.c (win32_target_ops): Remove qxfer_spu member.
gdb/testsuite/ChangeLog
2019-09-20 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/spu-info.exp: Remove file.
* gdb.arch/spu-info.c: Remove file.
* gdb.arch/spu-ls.exp: Remove file.
* gdb.arch/spu-ls.c: Remove file.
* gdb.asm/asm-source.exp: Remove support for spu*-*-*.
* gdb.asm/spu.inc: Remove file.
* gdb.base/dump.exp: Remove support for spu*-*-*.
* gdb.base/stack-checking.exp: Likewise.
* gdb.base/overlays.exp: Likewise.
* gdb.base/ovlymgr.c: Likewise.
* gdb.base/spu.ld: Remove file.
* gdb.cp/bs15503.exp: Remove support for spu*-*-*.
* gdb.cp/cpexprs.exp: Likewise.
* gdb.cp/exception.exp: Likewise.
* gdb.cp/gdb2495.exp: Likewise.
* gdb.cp/mb-templates.exp: Likewise.
* gdb.cp/pr9167.exp: Likewise.
* gdb.cp/userdef.exp: Likewise.
* gdb.xml/tdesc-regs.exp: Remove support for spu*-*-*.
* gdb.cell: Remove directory.
* lib/cell.exp: Remove file.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
In the following commit:
commit 7feb7d068ae65557ede03c36468ebac61b0939ca
Date: Mon May 11 12:08:03 2009 +0000
The last useful uses of normal_mask in linux-nat.c were removed, since
then this variable has sat around being initialised, but never used.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* linux-nat.c (normal_mask): Delete.
(_initialize_linux_nat): Don't initialise normal_mask.
|
|
This replaces throw_exception with "throw;" when possible. This was
written by script. The rule that is followed is that uses of the
form:
catch (... &name)
{
...
throw_exception (name);
}
... can be rewritten. This should always be safe, because exceptions
are caught by const reference, and therefore can't be modified in the
body of the catch.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* valops.c (value_rtti_indirect_type): Replace throw_exception
with throw.
* tracefile-tfile.c (tfile_target_open): Replace throw_exception
with throw.
* thread.c (thr_try_catch_cmd): Replace throw_exception with
throw.
* target.c (target_translate_tls_address): Replace throw_exception
with throw.
* stack.c (frame_apply_command_count): Replace throw_exception
with throw.
* solib-spu.c (append_ocl_sos): Replace throw_exception with
throw.
* s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception
with throw.
* rs6000-tdep.c (rs6000_frame_cache)
(rs6000_epilogue_frame_cache): Replace throw_exception with throw.
* remote.c: Replace throw_exception with throw.
* record-full.c (record_full_message, record_full_wait_1)
(record_full_restore): Replace throw_exception with throw.
* record-btrace.c:
(get_thread_current_frame_id, record_btrace_start_replaying)
(cmd_record_btrace_bts_start, cmd_record_btrace_pt_start)
(cmd_record_btrace_start): Replace throw_exception with throw.
* parse.c (parse_exp_in_context_1): Replace throw_exception with
throw.
* linux-nat.c (detach_one_lwp, linux_resume_one_lwp)
(resume_stopped_resumed_lwps): Replace throw_exception with throw.
* linespec.c:
(find_linespec_symbols): Replace throw_exception with throw.
* infrun.c (displaced_step_prepare, resume): Replace
throw_exception with throw.
* infcmd.c (post_create_inferior): Replace throw_exception with
throw.
* inf-loop.c (inferior_event_handler): Replace throw_exception
with throw.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Replace throw_exception with throw.
* frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle)
(get_prev_frame_always, get_frame_pc_if_available)
(get_frame_address_in_block_if_available, get_frame_language):
Replace throw_exception with throw.
* frame-unwind.c (frame_unwind_try_unwinder): Replace
throw_exception with throw.
* eval.c (fetch_subexp_value, evaluate_var_value)
(evaluate_funcall, evaluate_subexp_standard): Replace
throw_exception with throw.
* dwarf2loc.c (call_site_find_chain)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval):
Replace throw_exception with throw.
* dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception
with throw.
* darwin-nat.c (darwin_attach_pid): Replace throw_exception with
throw.
* cp-abi.c (baseclass_offset): Replace throw_exception with throw.
* completer.c (complete_line_internal): Replace throw_exception
with throw.
* compile/compile-object-run.c (compile_object_run): Replace
throw_exception with throw.
* cli/cli-script.c (process_next_line): Replace throw_exception
with throw.
* btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace)
(btrace_enable, btrace_maint_update_pt_packets): Replace
throw_exception with throw.
* breakpoint.c (create_breakpoint, save_breakpoints): Replace
throw_exception with throw.
* break-catch-throw.c (re_set_exception_catchpoint): Replace
throw_exception with throw.
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Replace throw_exception with throw.
* aarch64-tdep.c (aarch64_make_prologue_cache)
(aarch64_make_stub_cache): Replace throw_exception with throw.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_detach_one_lwp): Replace throw_exception with
throw.
(linux_resume_one_lwp): Likewise.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
