aboutsummaryrefslogtreecommitdiff
path: root/gdb/linux-nat.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-19gdb: Improve syscall entry/return tracking on LinuxJosh Stone1-9/+26
The existing logic was simply to flip syscall entry/return state when a syscall trap was seen, and even then only with active 'catch syscall'. That can get out of sync if 'catch syscall' is toggled at odd times. This patch updates the entry/return state for all syscall traps, regardless of catching state, and also updates known syscall state for other kinds of traps. Almost all PTRACE_EVENT stops are delivered from the middle of a syscall, so this can act like an entry. Every other kind of ptrace stop is only delivered outside of syscall event pairs, so marking them ignored ensures the next syscall trap looks like an entry. Three new test scenarios are added to catch-syscall.exp: - Disable 'catch syscall' from an entry to deliberately miss the return event, then re-enable to make sure a new entry is recognized. - Enable 'catch syscall' for the first time from a vfork event, which is a PTRACE_EVENT_VFORK in the middle of the syscall. Make sure the next syscall event is recognized as the return. - Make sure entry and return are recognized for an ENOSYS syscall. This is to defeat a common x86 hack that uses the pre-filled ENOSYS return value as a sign of being on the entry side. gdb/ChangeLog: 2015-10-19 Josh Stone <jistone@redhat.com> * linux-nat.c (linux_handle_syscall_trap): Always update entry/ return state, even when not actively catching syscalls at all. (linux_handle_extended_wait): Mark syscall_state like an entry. (wait_lwp): Set syscall_state ignored for other traps. (linux_nat_filter_event): Likewise. gdb/testsuite/ChangeLog: 2015-10-19 Josh Stone <jistone@redhat.com> * gdb.base/catch-syscall.c: Include <sched.h>. (unknown_syscall): New variable. (main): Trigger a vfork and an unknown syscall. * gdb.base/catch-syscall.exp (vfork_syscalls): New variable. (unknown_syscall_number): Likewise. (check_call_to_syscall): Accept an optional syscall pattern. (check_return_from_syscall): Likewise. (check_continue): Likewise. (test_catch_syscall_without_args): Check for vfork and ENOSYS. (test_catch_syscall_skipping_return): New test toggling off 'catch syscall' to step over the syscall return, then toggling back on. (test_catch_syscall_mid_vfork): New test turning on 'catch syscall' during a PTRACE_EVENT_VFORK stop, in the middle of a vfork syscall. (do_syscall_tests): Call test_catch_syscall_without_args and test_catch_syscall_mid_vfork. (test_catch_syscall_without_args_noxml): Check for vfork and ENOSYS. (fill_all_syscalls_numbers): Initialize unknown_syscall_number.
2015-09-30x86/Linux: reenable all-stop on top of non-stopPedro Alves1-2/+0
Since the record-btrace target now supports non-stop mode, we no longer need to force-disable as-ns on x86. gdb/ChangeLog: 2015-09-30 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_nat_always_non_stop_p): Always return 1. * x86-linux-nat.c (x86_linux_always_non_stop_p): Delete. (x86_linux_create_target): Don't install x86_linux_always_non_stop_p.
2015-09-25Add some more casts (1/2)Simon Marchi1-4/+4
Note: I needed to split this patch in two, otherwise it's too big for the mailing list. This patch adds explicit casts to situations where a void pointer is assigned to a pointer to the "real" type. Building in C++ mode requires those assignments to use an explicit cast. This includes, for example: - callback arguments (cleanups, comparison functions, ...) - data attached to some object (objfile, program space, etc) in the form of a void pointer - "user data" passed to some function This patch comes from the commit "(mostly) auto-generated patch to insert casts needed for C++", taken from Pedro's C++ branch. Only files built on x86 with --enable-targets=all are modified, so the native files for other arches will need to be dealt with separately. I built-tested this with --enable-targets=all and reg-tested. To my surprise, a test case (selftest.exp) had to be adjusted. Here's the ChangeLog entry. Again, this was relatively quick to make despite the length, thanks to David Malcom's script, although I don't believe it's very useful information in that particular case... gdb/ChangeLog: * aarch64-tdep.c (aarch64_make_prologue_cache): Add cast(s). (aarch64_make_stub_cache): Likewise. (value_of_aarch64_user_reg): Likewise. * ada-lang.c (ada_inferior_data_cleanup): Likewise. (get_ada_inferior_data): Likewise. (get_ada_pspace_data): Likewise. (ada_pspace_data_cleanup): Likewise. (ada_complete_symbol_matcher): Likewise. (ada_exc_search_name_matches): Likewise. * ada-tasks.c (get_ada_tasks_pspace_data): Likewise. (get_ada_tasks_inferior_data): Likewise. * addrmap.c (addrmap_mutable_foreach_worker): Likewise. (splay_obstack_alloc): Likewise. (splay_obstack_free): Likewise. * alpha-linux-tdep.c (alpha_linux_supply_gregset): Likewise. (alpha_linux_collect_gregset): Likewise. (alpha_linux_supply_fpregset): Likewise. (alpha_linux_collect_fpregset): Likewise. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise. * alpha-tdep.c (alpha_lds): Likewise. (alpha_sts): Likewise. (alpha_sigtramp_frame_unwind_cache): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_supply_int_regs): Likewise. (alpha_fill_int_regs): Likewise. (alpha_supply_fp_regs): Likewise. (alpha_fill_fp_regs): Likewise. * alphanbsd-tdep.c (alphanbsd_supply_fpregset): Likewise. (alphanbsd_aout_supply_gregset): Likewise. (alphanbsd_supply_gregset): Likewise. * amd64-linux-tdep.c (amd64_linux_init_abi): Likewise. (amd64_x32_linux_init_abi): Likewise. * amd64-nat.c (amd64_supply_native_gregset): Likewise. (amd64_collect_native_gregset): Likewise. * amd64-tdep.c (amd64_frame_cache): Likewise. (amd64_sigtramp_frame_cache): Likewise. (amd64_epilogue_frame_cache): Likewise. (amd64_supply_fxsave): Likewise. (amd64_supply_xsave): Likewise. (amd64_collect_fxsave): Likewise. (amd64_collect_xsave): Likewise. * amd64-windows-tdep.c (amd64_windows_frame_cache): Likewise. * amd64obsd-tdep.c (amd64obsd_trapframe_cache): Likewise. * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise. (arm_linux_collect_gregset): Likewise. (arm_linux_supply_nwfpe): Likewise. (arm_linux_collect_nwfpe): Likewise. (arm_linux_supply_vfp): Likewise. (arm_linux_collect_vfp): Likewise. * arm-tdep.c (arm_find_mapping_symbol): Likewise. (arm_prologue_unwind_stop_reason): Likewise. (arm_prologue_this_id): Likewise. (arm_prologue_prev_register): Likewise. (arm_exidx_data_free): Likewise. (arm_find_exidx_entry): Likewise. (arm_stub_this_id): Likewise. (arm_m_exception_this_id): Likewise. (arm_m_exception_prev_register): Likewise. (arm_normal_frame_base): Likewise. (gdb_print_insn_arm): Likewise. (arm_objfile_data_free): Likewise. (arm_record_special_symbol): Likewise. (value_of_arm_user_reg): Likewise. * armbsd-tdep.c (armbsd_supply_fpregset): Likewise. (armbsd_supply_gregset): Likewise. * auto-load.c (auto_load_pspace_data_cleanup): Likewise. (get_auto_load_pspace_data): Likewise. (hash_loaded_script_entry): Likewise. (eq_loaded_script_entry): Likewise. (clear_section_scripts): Likewise. (collect_matching_scripts): Likewise. * auxv.c (auxv_inferior_data_cleanup): Likewise. (get_auxv_inferior_data): Likewise. * avr-tdep.c (avr_frame_unwind_cache): Likewise. * ax-general.c (do_free_agent_expr_cleanup): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. (target_bfd_xclose): Likewise. (target_bfd_get_section_table): Likewise. * bfin-tdep.c (bfin_frame_cache): Likewise. * block.c (find_block_in_blockvector): Likewise. (call_site_for_pc): Likewise. (block_find_non_opaque_type_preferred): Likewise. * break-catch-sig.c (signal_catchpoint_insert_location): Likewise. (signal_catchpoint_remove_location): Likewise. (signal_catchpoint_breakpoint_hit): Likewise. (signal_catchpoint_print_one): Likewise. (signal_catchpoint_print_mention): Likewise. (signal_catchpoint_print_recreate): Likewise. * break-catch-syscall.c (get_catch_syscall_inferior_data): Likewise. * breakpoint.c (do_cleanup_counted_command_line): Likewise. (bp_location_compare_addrs): Likewise. (get_first_locp_gte_addr): Likewise. (check_tracepoint_command): Likewise. (do_map_commands_command): Likewise. (get_breakpoint_objfile_data): Likewise. (free_breakpoint_probes): Likewise. (do_captured_breakpoint_query): Likewise. (compare_breakpoints): Likewise. (bp_location_compare): Likewise. (bpstat_remove_breakpoint_callback): Likewise. (do_delete_breakpoint_cleanup): Likewise. * bsd-uthread.c (bsd_uthread_set_supply_uthread): Likewise. (bsd_uthread_set_collect_uthread): Likewise. (bsd_uthread_activate): Likewise. (bsd_uthread_fetch_registers): Likewise. (bsd_uthread_store_registers): Likewise. * btrace.c (check_xml_btrace_version): Likewise. (parse_xml_btrace_block): Likewise. (parse_xml_btrace_pt_config_cpu): Likewise. (parse_xml_btrace_pt_raw): Likewise. (parse_xml_btrace_pt): Likewise. (parse_xml_btrace_conf_bts): Likewise. (parse_xml_btrace_conf_pt): Likewise. (do_btrace_data_cleanup): Likewise. * c-typeprint.c (find_typedef_for_canonicalize): Likewise. * charset.c (cleanup_iconv): Likewise. (do_cleanup_iterator): Likewise. * cli-out.c (cli_uiout_dtor): Likewise. (cli_table_begin): Likewise. (cli_table_body): Likewise. (cli_table_end): Likewise. (cli_table_header): Likewise. (cli_begin): Likewise. (cli_end): Likewise. (cli_field_int): Likewise. (cli_field_skip): Likewise. (cli_field_string): Likewise. (cli_field_fmt): Likewise. (cli_spaces): Likewise. (cli_text): Likewise. (cli_message): Likewise. (cli_wrap_hint): Likewise. (cli_flush): Likewise. (cli_redirect): Likewise. (out_field_fmt): Likewise. (field_separator): Likewise. (cli_out_set_stream): Likewise. * cli/cli-cmds.c (compare_symtabs): Likewise. * cli/cli-dump.c (call_dump_func): Likewise. (restore_section_callback): Likewise. * cli/cli-script.c (clear_hook_in_cleanup): Likewise. (do_restore_user_call_depth): Likewise. (do_free_command_lines_cleanup): Likewise. * coff-pe-read.c (get_section_vmas): Likewise. (pe_as16): Likewise. (pe_as32): Likewise. * coffread.c (coff_symfile_read): Likewise. * common/agent.c (agent_look_up_symbols): Likewise. * common/filestuff.c (do_close_cleanup): Likewise. * common/format.c (free_format_pieces_cleanup): Likewise. * common/vec.c (vec_o_reserve): Likewise. * compile/compile-c-support.c (print_one_macro): Likewise. * compile/compile-c-symbols.c (hash_symbol_error): Likewise. (eq_symbol_error): Likewise. (del_symbol_error): Likewise. (error_symbol_once): Likewise. (gcc_convert_symbol): Likewise. (gcc_symbol_address): Likewise. (hash_symname): Likewise. (eq_symname): Likewise. * compile/compile-c-types.c (hash_type_map_instance): Likewise. (eq_type_map_instance): Likewise. (insert_type): Likewise. (convert_type): Likewise. * compile/compile-object-load.c (munmap_listp_free_cleanup): Likewise. (setup_sections): Likewise. (link_hash_table_free): Likewise. (copy_sections): Likewise. * compile/compile-object-run.c (do_module_cleanup): Likewise. * compile/compile.c (compile_print_value): Likewise. (do_rmdir): Likewise. (cleanup_compile_instance): Likewise. (cleanup_unlink_file): Likewise. * completer.c (free_completion_tracker): Likewise. * corelow.c (add_to_spuid_list): Likewise. * cp-namespace.c (reset_directive_searched): Likewise. * cp-support.c (reset_directive_searched): Likewise. * cris-tdep.c (cris_sigtramp_frame_unwind_cache): Likewise. (cris_frame_unwind_cache): Likewise. * d-lang.c (builtin_d_type): Likewise. * d-namespace.c (reset_directive_searched): Likewise. * dbxread.c (dbx_free_symfile_info): Likewise. (do_free_bincl_list_cleanup): Likewise. * disasm.c (hash_dis_line_entry): Likewise. (eq_dis_line_entry): Likewise. (dis_asm_print_address): Likewise. (fprintf_disasm): Likewise. (do_ui_file_delete): Likewise. * doublest.c (convert_floatformat_to_doublest): Likewise. * dummy-frame.c (pop_dummy_frame_bpt): Likewise. (dummy_frame_prev_register): Likewise. (dummy_frame_this_id): Likewise. * dwarf2-frame-tailcall.c (cache_hash): Likewise. (cache_eq): Likewise. (cache_find): Likewise. (tailcall_frame_this_id): Likewise. (dwarf2_tailcall_prev_register_first): Likewise. (tailcall_frame_prev_register): Likewise. (tailcall_frame_dealloc_cache): Likewise. (tailcall_frame_prev_arch): Likewise. * dwarf2-frame.c (dwarf2_frame_state_free): Likewise. (dwarf2_frame_set_init_reg): Likewise. (dwarf2_frame_init_reg): Likewise. (dwarf2_frame_set_signal_frame_p): Likewise. (dwarf2_frame_signal_frame_p): Likewise. (dwarf2_frame_set_adjust_regnum): Likewise. (dwarf2_frame_adjust_regnum): Likewise. (clear_pointer_cleanup): Likewise. (dwarf2_frame_cache): Likewise. (find_cie): Likewise. (dwarf2_frame_find_fde): Likewise. * dwarf2expr.c (dwarf_expr_address_type): Likewise. (free_dwarf_expr_context_cleanup): Likewise. * dwarf2loc.c (locexpr_find_frame_base_location): Likewise. (locexpr_get_frame_base): Likewise. (loclist_find_frame_base_location): Likewise. (loclist_get_frame_base): Likewise. (dwarf_expr_dwarf_call): Likewise. (dwarf_expr_get_base_type): Likewise. (dwarf_expr_push_dwarf_reg_entry_value): Likewise. (dwarf_expr_get_obj_addr): Likewise. (entry_data_value_coerce_ref): Likewise. (entry_data_value_copy_closure): Likewise. (entry_data_value_free_closure): Likewise. (get_frame_address_in_block_wrapper): Likewise. (dwarf2_evaluate_property): Likewise. (dwarf2_compile_property_to_c): Likewise. (needs_frame_read_addr_from_reg): Likewise. (needs_frame_get_reg_value): Likewise. (needs_frame_frame_base): Likewise. (needs_frame_frame_cfa): Likewise. (needs_frame_tls_address): Likewise. (needs_frame_dwarf_call): Likewise. (needs_dwarf_reg_entry_value): Likewise. (get_ax_pc): Likewise. (locexpr_read_variable): Likewise. (locexpr_read_variable_at_entry): Likewise. (locexpr_read_needs_frame): Likewise. (locexpr_describe_location): Likewise. (locexpr_tracepoint_var_ref): Likewise. (locexpr_generate_c_location): Likewise. (loclist_read_variable): Likewise. (loclist_read_variable_at_entry): Likewise. (loclist_describe_location): Likewise. (loclist_tracepoint_var_ref): Likewise. (loclist_generate_c_location): Likewise. * dwarf2read.c (line_header_hash_voidp): Likewise. (line_header_eq_voidp): Likewise. (dwarf2_has_info): Likewise. (dwarf2_get_section_info): Likewise. (locate_dwz_sections): Likewise. (hash_file_name_entry): Likewise. (eq_file_name_entry): Likewise. (delete_file_name_entry): Likewise. (dw2_setup): Likewise. (dw2_get_file_names_reader): Likewise. (dw2_find_pc_sect_compunit_symtab): Likewise. (hash_signatured_type): Likewise. (eq_signatured_type): Likewise. (add_signatured_type_cu_to_table): Likewise. (create_debug_types_hash_table): Likewise. (lookup_dwo_signatured_type): Likewise. (lookup_dwp_signatured_type): Likewise. (lookup_signatured_type): Likewise. (hash_type_unit_group): Likewise. (eq_type_unit_group): Likewise. (get_type_unit_group): Likewise. (process_psymtab_comp_unit_reader): Likewise. (sort_tu_by_abbrev_offset): Likewise. (process_skeletonless_type_unit): Likewise. (psymtabs_addrmap_cleanup): Likewise. (dwarf2_read_symtab): Likewise. (psymtab_to_symtab_1): Likewise. (die_hash): Likewise. (die_eq): Likewise. (load_full_comp_unit_reader): Likewise. (reset_die_in_process): Likewise. (free_cu_line_header): Likewise. (handle_DW_AT_stmt_list): Likewise. (hash_dwo_file): Likewise. (eq_dwo_file): Likewise. (hash_dwo_unit): Likewise. (eq_dwo_unit): Likewise. (create_dwo_cu_reader): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (lookup_dwo_unit_in_dwp): Likewise. (dwarf2_locate_dwo_sections): Likewise. (dwarf2_locate_common_dwp_sections): Likewise. (dwarf2_locate_v2_dwp_sections): Likewise. (hash_dwp_loaded_cutus): Likewise. (eq_dwp_loaded_cutus): Likewise. (lookup_dwo_cutu): Likewise. (abbrev_table_free_cleanup): Likewise. (dwarf2_free_abbrev_table): Likewise. (find_partial_die_in_comp_unit): Likewise. (free_line_header_voidp): Likewise. (follow_die_offset): Likewise. (follow_die_sig_1): Likewise. (free_heap_comp_unit): Likewise. (free_stack_comp_unit): Likewise. (dwarf2_free_objfile): Likewise. (per_cu_offset_and_type_hash): Likewise. (per_cu_offset_and_type_eq): Likewise. (get_die_type_at_offset): Likewise. (partial_die_hash): Likewise. (partial_die_eq): Likewise. (dwarf2_per_objfile_free): Likewise. (hash_strtab_entry): Likewise. (eq_strtab_entry): Likewise. (add_string): Likewise. (hash_symtab_entry): Likewise. (eq_symtab_entry): Likewise. (delete_symtab_entry): Likewise. (cleanup_mapped_symtab): Likewise. (add_indices_to_cpool): Likewise. (hash_psymtab_cu_index): Likewise. (eq_psymtab_cu_index): Likewise. (add_address_entry_worker): Likewise. (unlink_if_set): Likewise. (write_one_signatured_type): Likewise. (save_gdb_index_command): Likewise. * elfread.c (elf_symtab_read): Likewise. (elf_gnu_ifunc_cache_hash): Likewise. (elf_gnu_ifunc_cache_eq): Likewise. (elf_gnu_ifunc_record_cache): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_get_probes): Likewise. (probe_key_free): Likewise. * f-lang.c (builtin_f_type): Likewise. * frame-base.c (frame_base_append_sniffer): Likewise. (frame_base_set_default): Likewise. (frame_base_find_by_frame): Likewise. * frame-unwind.c (frame_unwind_prepend_unwinder): Likewise. (frame_unwind_append_unwinder): Likewise. (frame_unwind_find_by_frame): Likewise. * frame.c (frame_addr_hash): Likewise. (frame_addr_hash_eq): Likewise. (frame_stash_find): Likewise. (do_frame_register_read): Likewise. (unwind_to_current_frame): Likewise. (frame_cleanup_after_sniffer): Likewise. * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise. * frv-tdep.c (frv_frame_unwind_cache): Likewise. * ft32-tdep.c (ft32_frame_cache): Likewise. * gcore.c (do_bfd_delete_cleanup): Likewise. (gcore_create_callback): Likewise. * gdb_bfd.c (hash_bfd): Likewise. (eq_bfd): Likewise. (gdb_bfd_open): Likewise. (free_one_bfd_section): Likewise. (gdb_bfd_ref): Likewise. (gdb_bfd_unref): Likewise. (get_section_descriptor): Likewise. (gdb_bfd_map_section): Likewise. (gdb_bfd_crc): Likewise. (gdb_bfd_mark_parent): Likewise. (gdb_bfd_record_inclusion): Likewise. (gdb_bfd_requires_relocations): Likewise. (print_one_bfd): Likewise. * gdbtypes.c (type_pair_hash): Likewise. (type_pair_eq): Likewise. (builtin_type): Likewise. (objfile_type): Likewise. * gnu-v3-abi.c (vtable_ptrdiff_type): Likewise. (vtable_address_point_offset): Likewise. (gnuv3_get_vtable): Likewise. (hash_value_and_voffset): Likewise. (eq_value_and_voffset): Likewise. (compare_value_and_voffset): Likewise. (compute_vtable_size): Likewise. (gnuv3_get_typeid_type): Likewise. * go-lang.c (builtin_go_type): Likewise. * guile/scm-block.c (bkscm_hash_block_smob): Likewise. (bkscm_eq_block_smob): Likewise. (bkscm_objfile_block_map): Likewise. (bkscm_del_objfile_blocks): Likewise. * guile/scm-breakpoint.c (bpscm_build_bp_list): Likewise. * guile/scm-disasm.c (gdbscm_disasm_read_memory_worker): Likewise. (gdbscm_disasm_print_address): Likewise. * guile/scm-frame.c (frscm_hash_frame_smob): Likewise. (frscm_eq_frame_smob): Likewise. (frscm_inferior_frame_map): Likewise. (frscm_del_inferior_frames): Likewise. * guile/scm-gsmob.c (gdbscm_add_objfile_ref): Likewise. * guile/scm-objfile.c (ofscm_handle_objfile_deleted): Likewise. (ofscm_objfile_smob_from_objfile): Likewise. * guile/scm-ports.c (ioscm_write): Likewise. (ioscm_file_port_delete): Likewise. (ioscm_file_port_rewind): Likewise. (ioscm_file_port_put): Likewise. (ioscm_file_port_write): Likewise. * guile/scm-progspace.c (psscm_handle_pspace_deleted): Likewise. (psscm_pspace_smob_from_pspace): Likewise. * guile/scm-safe-call.c (scscm_recording_pre_unwind_handler): Likewise. (scscm_recording_unwind_handler): Likewise. (gdbscm_with_catch): Likewise. (scscm_call_0_body): Likewise. (scscm_call_1_body): Likewise. (scscm_call_2_body): Likewise. (scscm_call_3_body): Likewise. (scscm_call_4_body): Likewise. (scscm_apply_1_body): Likewise. (scscm_eval_scheme_string): Likewise. (gdbscm_safe_eval_string): Likewise. (scscm_source_scheme_script): Likewise. (gdbscm_safe_source_script): Likewise. * guile/scm-string.c (gdbscm_call_scm_to_stringn): Likewise. (gdbscm_call_scm_from_stringn): Likewise. * guile/scm-symbol.c (syscm_hash_symbol_smob): Likewise. (syscm_eq_symbol_smob): Likewise. (syscm_get_symbol_map): Likewise. (syscm_del_objfile_symbols): Likewise. * guile/scm-symtab.c (stscm_hash_symtab_smob): Likewise. (stscm_eq_symtab_smob): Likewise. (stscm_objfile_symtab_map): Likewise. (stscm_del_objfile_symtabs): Likewise. * guile/scm-type.c (tyscm_hash_type_smob): Likewise. (tyscm_eq_type_smob): Likewise. (tyscm_type_map): Likewise. (tyscm_copy_type_recursive): Likewise. (save_objfile_types): Likewise. * guile/scm-utils.c (extract_arg): Likewise. * h8300-tdep.c (h8300_frame_cache): Likewise. * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind_cache): Likewise. * hppa-tdep.c (compare_unwind_entries): Likewise. (find_unwind_entry): Likewise. (hppa_frame_cache): Likewise. (hppa_stub_frame_unwind_cache): Likewise. * hppanbsd-tdep.c (hppanbsd_supply_gregset): Likewise. * hppaobsd-tdep.c (hppaobsd_supply_gregset): Likewise. (hppaobsd_supply_fpregset): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * i386-tdep.c (i386_frame_cache): Likewise. (i386_epilogue_frame_cache): Likewise. (i386_sigtramp_frame_cache): Likewise. (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_gdbarch_init): Likewise. * i386obsd-tdep.c (i386obsd_aout_supply_regset): Likewise. (i386obsd_trapframe_cache): Likewise. * i387-tdep.c (i387_supply_fsave): Likewise. (i387_collect_fsave): Likewise. (i387_supply_fxsave): Likewise. (i387_collect_fxsave): Likewise. (i387_supply_xsave): Likewise. (i387_collect_xsave): Likewise. * ia64-tdep.c (ia64_frame_cache): Likewise. (ia64_sigtramp_frame_cache): Likewise. * infcmd.c (attach_command_continuation): Likewise. (attach_command_continuation_free_args): Likewise. * inferior.c (restore_inferior): Likewise. (delete_thread_of_inferior): Likewise. * inflow.c (inflow_inferior_data_cleanup): Likewise. (get_inflow_inferior_data): Likewise. (inflow_inferior_exit): Likewise. * infrun.c (displaced_step_clear_cleanup): Likewise. (restore_current_uiout_cleanup): Likewise. (release_stop_context_cleanup): Likewise. (do_restore_infcall_suspend_state_cleanup): Likewise. (do_restore_infcall_control_state_cleanup): Likewise. (restore_inferior_ptid): Likewise. * inline-frame.c (block_starting_point_at): Likewise. * iq2000-tdep.c (iq2000_frame_cache): Likewise. * jit.c (get_jit_objfile_data): Likewise. (get_jit_program_space_data): Likewise. (jit_object_close_impl): Likewise. (jit_find_objf_with_entry_addr): Likewise. (jit_breakpoint_deleted): Likewise. (jit_unwind_reg_set_impl): Likewise. (jit_unwind_reg_get_impl): Likewise. (jit_dealloc_cache): Likewise. (jit_frame_sniffer): Likewise. (jit_frame_prev_register): Likewise. (jit_prepend_unwinder): Likewise. (jit_inferior_exit_hook): Likewise. (free_objfile_data): Likewise. * jv-lang.c (jv_per_objfile_free): Likewise. (get_dynamics_objfile): Likewise. (get_java_class_symtab): Likewise. (builtin_java_type): Likewise. * language.c (language_string_char_type): Likewise. (language_bool_type): Likewise. (language_lookup_primitive_type): Likewise. (language_lookup_primitive_type_as_symbol): Likewise. * linespec.c (hash_address_entry): Likewise. (eq_address_entry): Likewise. (iterate_inline_only): Likewise. (iterate_name_matcher): Likewise. (decode_line_2_compare_items): Likewise. (collect_one_symbol): Likewise. (compare_symbols): Likewise. (compare_msymbols): Likewise. (add_symtabs_to_list): Likewise. (collect_symbols): Likewise. (compare_msyms): Likewise. (add_minsym): Likewise. (cleanup_linespec_result): Likewise. * linux-fork.c (inferior_call_waitpid_cleanup): Likewise. * linux-nat.c (delete_lwp_cleanup): Likewise. (count_events_callback): Likewise. (select_event_lwp_callback): Likewise. (resume_stopped_resumed_lwps): Likewise. * linux-tdep.c (get_linux_gdbarch_data): Likewise. (invalidate_linux_cache_inf): Likewise. (get_linux_inferior_data): Likewise. (linux_find_memory_regions_thunk): Likewise. (linux_make_mappings_callback): Likewise. (linux_corefile_thread_callback): Likewise. (find_mapping_size): Likewise. * linux-thread-db.c (find_new_threads_callback): Likewise. * lm32-tdep.c (lm32_frame_cache): Likewise. * m2-lang.c (builtin_m2_type): Likewise. * m32c-tdep.c (m32c_analyze_frame_prologue): Likewise. * m32r-linux-tdep.c (m32r_linux_sigtramp_frame_cache): Likewise. (m32r_linux_supply_gregset): Likewise. (m32r_linux_collect_gregset): Likewise. * m32r-tdep.c (m32r_frame_unwind_cache): Likewise. * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. * m68k-tdep.c (m68k_frame_cache): Likewise. * m68kbsd-tdep.c (m68kbsd_supply_fpregset): Likewise. (m68kbsd_supply_gregset): Likewise. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise. * m88k-tdep.c (m88k_frame_cache): Likewise. (m88k_supply_gregset): Likewise. gdb/gdbserver/ChangeLog: * dll.c (match_dll): Add cast(s). (unloaded_dll): Likewise. * linux-low.c (second_thread_of_pid_p): Likewise. (delete_lwp_callback): Likewise. (count_events_callback): Likewise. (select_event_lwp_callback): Likewise. (linux_set_resume_request): Likewise. * server.c (accumulate_file_name_length): Likewise. (emit_dll_description): Likewise. (handle_qxfer_threads_worker): Likewise. (visit_actioned_threads): Likewise. * thread-db.c (any_thread_of): Likewise. * tracepoint.c (same_process_p): Likewise. (match_blocktype): Likewise. (build_traceframe_info_xml): Likewise. gdb/testsuite/ChangeLog: * gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected source line.
2015-09-25Add casts to memory allocation related callsSimon Marchi1-2/+2
Most allocation functions (if not all) return a void* pointing to the allocated memory. In C++, we need to add an explicit cast when assigning the result to a pointer to another type (which is the case more often than not). The content of this patch is taken from Pedro's branch, from commit "(mostly) auto-generated patch to insert casts needed for C++". I validated that the changes make sense and manually reflowed the code to make it respect the coding style. I also found multiple places where I could use XNEW/XNEWVEC/XRESIZEVEC/etc. Thanks a lot to whoever did that automated script to insert casts, doing it completely by hand would have taken a ridiculous amount of time. Only files built on x86 with --enable-targets=all are modified. This means that all other -nat.c files are untouched and will have to be dealt with later by using appropiate compilers. Or maybe we can try to build them with a regular g++ just to know where to add casts, I don't know. I built-tested this with --enable-targets=all and reg-tested. Here's the changelog entry, which was not too bad to make despite the size, thanks to David Malcom's script. I fixed some bits by hand, but there might be some wrong parts left (hopefully not). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast to allocation result assignment. * ada-exp.y (write_object_renaming): Likewise. (write_ambiguous_var): Likewise. (ada_nget_field_index): Likewise. (write_var_or_type): Likewise. * ada-lang.c (ada_decode_symbol): Likewise. (ada_value_assign): Likewise. (value_pointer): Likewise. (cache_symbol): Likewise. (add_nonlocal_symbols): Likewise. (ada_name_for_lookup): Likewise. (symbol_completion_add): Likewise. (ada_to_fixed_type_1): Likewise. (ada_get_next_arg): Likewise. (defns_collected): Likewise. * ada-lex.l (processId): Likewise. (processString): Likewise. * ada-tasks.c (read_known_tasks_array): Likewise. (read_known_tasks_list): Likewise. * ada-typeprint.c (decoded_type_name): Likewise. * addrmap.c (addrmap_mutable_create_fixed): Likewise. * amd64-tdep.c (amd64_push_arguments): Likewise. (amd64_displaced_step_copy_insn): Likewise. (amd64_classify_insn_at): Likewise. (amd64_relocate_instruction): Likewise. * amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise. * arch-utils.c (simple_displaced_step_copy_insn): Likewise. (initialize_current_architecture): Likewise. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise. * arm-tdep.c (arm_exidx_new_objfile): Likewise. (arm_push_dummy_call): Likewise. (extend_buffer_earlier): Likewise. (arm_adjust_breakpoint_address): Likewise. (arm_skip_stub): Likewise. * auto-load.c (filename_is_in_pattern): Likewise. (maybe_add_script_file): Likewise. (maybe_add_script_text): Likewise. (auto_load_objfile_script_1): Likewise. * auxv.c (ld_so_xfer_auxv): Likewise. * ax-general.c (new_agent_expr): Likewise. (grow_expr): Likewise. (ax_reg_mask): Likewise. * bcache.c (bcache_full): Likewise. * breakpoint.c (program_breakpoint_here_p): Likewise. * btrace.c (parse_xml_raw): Likewise. * build-id.c (build_id_to_debug_bfd): Likewise. * buildsym.c (end_symtab_with_blockvector): Likewise. * c-exp.y (string_exp): Likewise. (qualified_name): Likewise. (write_destructor_name): Likewise. (operator_stoken): Likewise. (parse_number): Likewise. (scan_macro_expansion): Likewise. (yylex): Likewise. (c_print_token): Likewise. * c-lang.c (c_get_string): Likewise. (emit_numeric_character): Likewise. * charset.c (wchar_iterate): Likewise. * cli/cli-cmds.c (complete_command): Likewise. (make_command): Likewise. * cli/cli-dump.c (restore_section_callback): Likewise. (restore_binary_file): Likewise. * cli/cli-interp.c (cli_interpreter_exec): Likewise. * cli/cli-script.c (execute_control_command): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (add_pe_forwarded_sym): Likewise. (read_pe_exported_syms): Likewise. * coffread.c (coff_read_struct_type): Likewise. (coff_read_enum_type): Likewise. * common/btrace-common.c (btrace_data_append): Likewise. * common/buffer.c (buffer_grow): Likewise. * common/filestuff.c (gdb_fopen_cloexec): Likewise. * common/format.c (parse_format_string): Likewise. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise. * common/xml-utils.c (xml_escape_text): Likewise. * compile/compile-object-load.c (copy_sections): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * completer.c (filename_completer): Likewise. * corefile.c (read_memory_typed_address): Likewise. (write_memory_unsigned_integer): Likewise. (write_memory_signed_integer): Likewise. (complete_set_gnutarget): Likewise. * corelow.c (get_core_register_section): Likewise. * cp-name-parser.y (d_grab): Likewise. (allocate_info): Likewise. (cp_new_demangle_parse_info): Likewise. * cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise. (cp_lookup_symbol_in_namespace): Likewise. (lookup_namespace_scope): Likewise. (find_symbol_in_baseclass): Likewise. (cp_lookup_nested_symbol): Likewise. (cp_lookup_transparent_type_loop): Likewise. * cp-support.c (copy_string_to_obstack): Likewise. (make_symbol_overload_list): Likewise. (make_symbol_overload_list_namespace): Likewise. (make_symbol_overload_list_adl_namespace): Likewise. (first_component_command): Likewise. * cp-valprint.c (cp_print_value): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * d-exp.y (StringExp): Likewise. * d-namespace.c (d_lookup_symbol_in_module): Likewise. (lookup_module_scope): Likewise. (find_symbol_in_baseclass): Likewise. (d_lookup_nested_symbol): Likewise. * dbxread.c (find_stab_function_addr): Likewise. (read_dbx_symtab): Likewise. (dbx_end_psymtab): Likewise. (cp_set_block_scope): Likewise. * dcache.c (dcache_alloc): Likewise. * demangle.c (_initialize_demangler): Likewise. * dicos-tdep.c (dicos_load_module_p): Likewise. * dictionary.c (dict_create_hashed_expandable): Likewise. (dict_create_linear_expandable): Likewise. (expand_hashtable): Likewise. (add_symbol_linear_expandable): Likewise. * dwarf2-frame.c (add_cie): Likewise. (add_fde): Likewise. (dwarf2_build_frame_info): Likewise. * dwarf2expr.c (dwarf_expr_grow_stack): Likewise. (dwarf_expr_fetch_address): Likewise. (add_piece): Likewise. (execute_stack_op): Likewise. * dwarf2loc.c (chain_candidate): Likewise. (dwarf_entry_parameter_to_value): Likewise. (read_pieced_value): Likewise. (write_pieced_value): Likewise. * dwarf2read.c (dwarf2_read_section): Likewise. (add_type_unit): Likewise. (read_comp_units_from_section): Likewise. (fixup_go_packaging): Likewise. (dwarf2_compute_name): Likewise. (dwarf2_physname): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (read_call_site_scope): Likewise. (dwarf2_attach_fields_to_type): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (read_common_block): Likewise. (abbrev_table_read_table): Likewise. (guess_partial_die_structure_name): Likewise. (fixup_partial_die): Likewise. (add_file_name): Likewise. (dwarf2_const_value_data): Likewise. (dwarf2_const_value_attr): Likewise. (build_error_marker_type): Likewise. (guess_full_die_structure_name): Likewise. (anonymous_struct_prefix): Likewise. (typename_concat): Likewise. (dwarf2_canonicalize_name): Likewise. (dwarf2_name): Likewise. (write_constant_as_bytes): Likewise. (dwarf2_fetch_constant_bytes): Likewise. (copy_string): Likewise. (parse_macro_definition): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_rel_plt_read): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_gnu_ifunc_resolve_by_got): Likewise. (elf_read_minimal_symbols): Likewise. (elf_gnu_ifunc_record_cache): Likewise. * event-top.c (top_level_prompt): Likewise. (command_line_handler): Likewise. * exec.c (resize_section_table): Likewise. * expprint.c (print_subexp_standard): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * findcmd.c (parse_find_args): Likewise. * findvar.c (address_from_register): Likewise. * frame.c (get_prev_frame_always): Likewise. * gdb_bfd.c (gdb_bfd_ref): Likewise. (get_section_descriptor): Likewise. * gdb_obstack.c (obconcat): Likewise. (obstack_strdup): Likewise. * gdbtypes.c (lookup_function_type_with_arguments): Likewise. (create_set_type): Likewise. (lookup_unsigned_typename): Likewise. (lookup_signed_typename): Likewise. (resolve_dynamic_union): Likewise. (resolve_dynamic_struct): Likewise. (add_dyn_prop): Likewise. (copy_dynamic_prop_list): Likewise. (arch_flags_type): Likewise. (append_composite_type_field_raw): Likewise. * gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise. * gnu-v3-abi.c (gnuv3_rtti_type): Likewise. * go-exp.y (string_exp): Likewise. * go-lang.c (go_demangle): Likewise. * guile/guile.c (compute_scheme_string): Likewise. * guile/scm-cmd.c (gdbscm_parse_command_name): Likewise. (gdbscm_canonicalize_command_name): Likewise. * guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise. (ioscm_init_memory_port): Likewise. (ioscm_reinit_memory_port): Likewise. * guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise. (gdbscm_gc_dup_argv): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (internalize_unwinds): Likewise. (read_unwind_info): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. (windows_core_xfer_shared_libraries): Likewise. * i386-tdep.c (i386_displaced_step_copy_insn): Likewise. (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise. * inf-child.c (inf_child_fileio_readlink): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register): Likewise. (inf_ptrace_store_register): Likewise. * infrun.c (follow_exec): Likewise. (displaced_step_prepare_throw): Likewise. (save_stop_context): Likewise. (save_infcall_suspend_state): Likewise. * jit.c (jit_read_descriptor): Likewise. (jit_read_code_entry): Likewise. (jit_symtab_line_mapping_add_impl): Likewise. (finalize_symtab): Likewise. (jit_unwind_reg_get_impl): Likewise. * jv-exp.y (QualifiedName): Likewise. * jv-lang.c (get_java_utf8_name): Likewise. (type_from_class): Likewise. (java_demangle_type_signature): Likewise. (java_class_name_from_physname): Likewise. * jv-typeprint.c (java_type_print_base): Likewise. * jv-valprint.c (java_value_print): Likewise. * language.c (add_language): Likewise. * linespec.c (add_sal_to_sals_basic): Likewise. (add_sal_to_sals): Likewise. (decode_objc): Likewise. (find_linespec_symbols): Likewise. * linux-fork.c (fork_save_infrun_state): Likewise. * linux-nat.c (linux_nat_detach): Likewise. (linux_nat_fileio_readlink): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (Do): Likewise. * linux-tdep.c (linux_core_info_proc_mappings): Likewise. (linux_collect_regset_section_cb): Likewise. (linux_get_siginfo_data): Likewise. * linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise. (try_thread_db_load_from_dir): Likewise. (thread_db_load_search): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise. (m32c_m16c_pointer_to_address): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise. * m68k-tdep.c (m68k_get_longjmp_target): Likewise. * machoread.c (macho_check_dsym): Likewise. * macroexp.c (resize_buffer): Likewise. (gather_arguments): Likewise. (maybe_expand): Likewise. * macrotab.c (new_macro_key): Likewise. (new_source_file): Likewise. (new_macro_definition): Likewise. * mdebugread.c (parse_symbol): Likewise. (parse_type): Likewise. (parse_partial_symbols): Likewise. (psymtab_to_symtab_1): Likewise. * mem-break.c (default_memory_insert_breakpoint): Likewise. * mi/mi-cmd-break.c (mi_argv_to_format): Likewise. * mi/mi-main.c (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory_bytes): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. (mi_parse): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. * mips-tdep.c (mips_read_fp_register_single): Likewise. (mips_print_fp_register): Likewise. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise. * mipsread.c (read_alphacoff_dynamic_symtab): Likewise. * mt-tdep.c (mt_register_name): Likewise. (mt_registers_info): Likewise. (mt_push_dummy_call): Likewise. * namespace.c (add_using_directive): Likewise. * nat/linux-btrace.c (perf_event_read): Likewise. (linux_enable_bts): Likewise. * nat/linux-osdata.c (linux_common_core_of_thread): Likewise. * nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise. * nto-tdep.c (nto_find_and_open_solib): Likewise. (nto_parse_redirection): Likewise. * objc-lang.c (objc_demangle): Likewise. (find_methods): Likewise. * objfiles.c (get_objfile_bfd_data): Likewise. (set_objfile_main_name): Likewise. (allocate_objfile): Likewise. (objfile_relocate): Likewise. (update_section_map): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * p-exp.y (exp): Likewise. (yylex): Likewise. * p-valprint.c (pascal_object_print_value): Likewise. * parse.c (initialize_expout): Likewise. (mark_completion_tag): Likewise. (copy_name): Likewise. (parse_float): Likewise. (type_stack_reserve): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. (ppu2spu_prev_register): Likewise. * ppc-ravenscar-thread.c (supply_register_at_address): Likewise. * printcmd.c (printf_wide_c_string): Likewise. (printf_pointer): Likewise. * probe.c (parse_probes): Likewise. * python/py-cmd.c (gdbpy_parse_command_name): Likewise. (cmdpy_init): Likewise. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise. * python/py-symtab.c (set_sal): Likewise. * python/py-unwind.c (pyuw_sniffer): Likewise. * python/python.c (python_interactive_command): Likewise. (compute_python_string): Likewise. * ravenscar-thread.c (get_running_thread_id): Likewise. * record-full.c (record_full_exec_insn): Likewise. (record_full_core_open_1): Likewise. * regcache.c (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. * remote-fileio.c (remote_fileio_func_open): Likewise. (remote_fileio_func_rename): Likewise. (remote_fileio_func_unlink): Likewise. (remote_fileio_func_stat): Likewise. (remote_fileio_func_system): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. (mips_load_srec): Likewise. (pmon_end_download): Likewise. * remote.c (new_remote_state): Likewise. (map_regcache_remote_table): Likewise. (remote_register_number_and_offset): Likewise. (init_remote_state): Likewise. (get_memory_packet_size): Likewise. (remote_pass_signals): Likewise. (remote_program_signals): Likewise. (remote_start_remote): Likewise. (remote_check_symbols): Likewise. (remote_query_supported): Likewise. (extended_remote_attach): Likewise. (process_g_packet): Likewise. (store_registers_using_G): Likewise. (putpkt_binary): Likewise. (read_frame): Likewise. (compare_sections_command): Likewise. (remote_hostio_pread): Likewise. (remote_hostio_readlink): Likewise. (remote_file_put): Likewise. (remote_file_get): Likewise. (remote_pid_to_exec_file): Likewise. (_initialize_remote): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. * rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise. (bfd_uses_spe_extensions): Likewise. * s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise. * score-tdep.c (score7_malloc_and_get_memblock): Likewise. * solib-dsbt.c (decode_loadmap): Likewise. (fetch_loadmap): Likewise. (scan_dyntag): Likewise. (enable_break): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (fetch_loadmap): Likewise. (enable_break2): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_relocate_main_executable): Likewise. (spu_bfd_open): Likewise. * solib-svr4.c (lm_info_read): Likewise. (read_program_header): Likewise. (find_program_interpreter): Likewise. (scan_dyntag): Likewise. (elf_locate_base): Likewise. (open_symbol_file_object): Likewise. (read_program_headers_from_bfd): Likewise. (svr4_relocate_main_executable): Likewise. * solib-target.c (solib_target_relocate_section_addresses): Likewise. * solib.c (solib_find_1): Likewise. (exec_file_find): Likewise. (solib_find): Likewise. * source.c (openp): Likewise. (print_source_lines_base): Likewise. (forward_search_command): Likewise. * sparc-ravenscar-thread.c (supply_register_at_address): Likewise. * spu-tdep.c (spu2ppu_prev_register): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (patch_block_stabs): Likewise. (define_symbol): Likewise. (again:): Likewise. (read_member_functions): Likewise. (read_one_struct_field): Likewise. (read_enum_type): Likewise. (common_block_start): Likewise. * stack.c (read_frame_arg): Likewise. (backtrace_command): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. * symfile.c (syms_from_objfile_1): Likewise. (find_separate_debug_file): Likewise. (load_command): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (reread_symbols): Likewise. (add_filename_language): Likewise. (allocate_compunit_symtab): Likewise. (read_target_long_array): Likewise. (simple_read_overlay_table): Likewise. * symtab.c (symbol_set_names): Likewise. (resize_symbol_cache): Likewise. (rbreak_command): Likewise. (completion_list_add_name): Likewise. (completion_list_objc_symbol): Likewise. (add_filename_to_list): Likewise. * target-descriptions.c (maint_print_c_tdesc_cmd): Likewise. * target-memory.c (target_write_memory_blocks): Likewise. * target.c (target_read_string): Likewise. (read_whatever_is_readable): Likewise. (target_read_alloc_1): Likewise. (simple_search_memory): Likewise. (target_fileio_read_alloc_1): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. * top.c (command_line_input): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (tracefile_fetch_registers): Likewise. * tracepoint.c (add_memrange): Likewise. (init_collection_list): Likewise. (add_aexpr): Likewise. (trace_dump_actions): Likewise. (parse_trace_status): Likewise. (parse_tracepoint_definition): Likewise. (parse_tsv_definition): Likewise. (parse_static_tracepoint_marker_definition): Likewise. * tui/tui-file.c (tui_sfileopen): Likewise. (tui_file_adjust_strbuf): Likewise. * tui/tui-io.c (tui_expand_tabs): Likewise. * tui/tui-source.c (tui_set_source_content): Likewise. * typeprint.c (find_global_typedef): Likewise. * ui-file.c (do_ui_file_xstrdup): Likewise. (ui_file_obsavestring): Likewise. (mem_file_write): Likewise. * utils.c (make_hex_string): Likewise. (get_regcomp_error): Likewise. (puts_filtered_tabular): Likewise. (gdb_realpath_keepfile): Likewise. (ldirname): Likewise. (gdb_bfd_errmsg): Likewise. (substitute_path_component): Likewise. * valops.c (search_struct_method): Likewise. (find_oload_champ_namespace_loop): Likewise. * valprint.c (print_decimal_chars): Likewise. (read_string): Likewise. (generic_emit_char): Likewise. * varobj.c (varobj_delete): Likewise. (varobj_value_get_print_value): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise. * windows-tdep.c (display_one_tib): Likewise. * xcoffread.c (read_xcoff_symtab): Likewise. (process_xcoff_symbol): Likewise. (swap_sym): Likewise. (scan_xcoff_symtab): Likewise. (xcoff_initial_scan): Likewise. * xml-support.c (gdb_xml_end_element): Likewise. (xml_process_xincludes): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (xml_list_of_syscalls): Likewise. * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Add cast to allocation result assignment. (gdb_unparse_agent_expr): Likewise. * hostio.c (require_data): Likewise. (handle_pread): Likewise. * linux-low.c (disable_regset): Likewise. (fetch_register): Likewise. (store_register): Likewise. (get_dynamic): Likewise. (linux_qxfer_libraries_svr4): Likewise. * mem-break.c (delete_fast_tracepoint_jump): Likewise. (set_fast_tracepoint_jump): Likewise. (uninsert_fast_tracepoint_jumps_at): Likewise. (reinsert_fast_tracepoint_jumps_at): Likewise. (validate_inserted_breakpoint): Likewise. (clone_agent_expr): Likewise. * regcache.c (init_register_cache): Likewise. * remote-utils.c (putpkt_binary_1): Likewise. (decode_M_packet): Likewise. (decode_X_packet): Likewise. (look_up_one_symbol): Likewise. (relocate_instruction): Likewise. (monitor_output): Likewise. * server.c (handle_search_memory): Likewise. (handle_qxfer_exec_file): Likewise. (handle_qxfer_libraries): Likewise. (handle_qxfer): Likewise. (handle_query): Likewise. (handle_v_cont): Likewise. (handle_v_run): Likewise. (captured_main): Likewise. * target.c (write_inferior_memory): Likewise. * thread-db.c (try_thread_db_load_from_dir): Likewise. * tracepoint.c (init_trace_buffer): Likewise. (add_tracepoint_action): Likewise. (add_traceframe): Likewise. (add_traceframe_block): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtdv): Likewise. (cmd_qtstatus): Likewise. (response_source): Likewise. (response_tsv): Likewise. (cmd_qtnotes): Likewise. (gdb_collect): Likewise. (initialize_tracepoint): Likewise.
2015-09-09Merge async and sync code paths some morePedro Alves1-23/+0
This patch makes the execution control code use largely the same mechanisms in both sync- and async-capable targets. This means using continuations and use the event loop to react to target events on sync targets as well. The trick is to immediately mark infrun's event loop source after resume instead of calling wait_for_inferior. Then fetch_inferior_event is adjusted to do a blocking wait on sync targets. Tested on x86_64 Fedora 20, native and gdbserver, with and without "maint set target-async off". gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * breakpoint.c (bpstat_do_actions_1, until_break_command): Don't check whether the target can async. * inf-loop.c (inferior_event_handler): Only call target_async if the target can async. * infcall.c: Include top.h and interps.h. (run_inferior_call): For the interpreter to sync mode while running the infcall. Call wait_sync_command_done instead of wait_for_inferior plus normal_stop. * infcmd.c (prepare_execution_command): Don't check whether the target can async when running in the foreground. (step_1): Delete synchronous case handling. (step_once): Always install a continuation, even in sync mode. (until_next_command, finish_forward): Don't check whether the target can async. (attach_command_post_wait, notice_new_inferior): Always install a continuation, even in sync mode. * infrun.c (mark_infrun_async_event_handler): New function. (proceed): In sync mode, mark infrun's event source instead of waiting for events here. (fetch_inferior_event): If the target can't async, do a blocking wait. (prepare_to_wait): In sync mode, mark infrun's event source. (infrun_async_inferior_event_handler): No longer bail out if the target can't async. * infrun.h (mark_infrun_async_event_handler): New declaration. * linux-nat.c (linux_nat_wait_1): Remove calls to set_sigint_trap/clear_sigint_trap. (linux_nat_terminal_inferior): No longer check whether the target can async. * mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify comment. (mi_execute_command_input_handler): No longer check whether the target is async. Update and simplify comment. * target.c (default_target_wait): New function. * target.h (struct target_ops) <to_wait>: Now defaults to default_target_wait. (default_target_wait): Declare. * top.c (wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... this. * top.h (wait_sync_command_done): Declare. * target-delegates.c: Regenerate.
2015-08-27Detect SW breakpoints in Cell/B.E. combined debuggingUlrich Weigand1-1/+1
The Linux target and gdbserver now check the siginfo si_code reported on a SIGTRAP to detect whether the trap indicates a software breakpoint was hit. Unfortunately, on Cell/B.E., the kernel uses an si_code value of TRAP_BRKPT when a SW breakpoint was hit in PowerPC code, but a si_code value of SI_KERNEL when a SW breakpoint was hit in SPU code. This patch updates Linux target and gdbserver to accept both si_code values to indicate SW breakpoint on PowerPC. ChangeLog: * nat/linux-ptrace.h (GDB_ARCH_TRAP_BRKPT): Replace by ... (GDB_ARCH_IS_TRAP_BRKPT): ... this. Add __powerpc__ case. * linux-nat.c (check_stopped_by_breakpoint): Use GDB_ARCH_IS_TRAP_BRKPT instead of GDB_ARCH_TRAP_BRKPT. gdbserver/ChangeLog: * linux-low.c (check_stopped_by_breakpoint): Use GDB_ARCH_IS_TRAP_BRKPT instead of GDB_ARCH_TRAP_BRKPT.
2015-08-26Replace some xmalloc-family functions with XNEW-family onesSimon Marchi1-2/+2
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is to change some calls to the xmalloc family of functions to calls to the equivalents in the XNEW family. This avoids adding an explicit cast, so it keeps the code a bit more readable. Some of them also map relatively well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be possible to do scripted replacements if needed. I only changed calls that were obviously allocating memory for one or multiple "objects". Allocation of variable sizes (such as strings or buffer handling) will be for later (and won't use XNEW). - xmalloc (sizeof (struct foo)) -> XNEW (struct foo) - xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num) - xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo) - xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num) - xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num) - obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo) - obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num) - alloca (sizeof (struct foo)) -> XALLOCA (struct foo) - alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num) Some instances of xmalloc followed by memset to zero the buffer were replaced by XCNEW or XCNEWVEC. I regtested on x86-64, Ubuntu 14.04, but the patch touches many architecture-specific files. For those I'll have to rely on the buildbot or people complaining that I broke their gdb. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_add_process): Likewise. * aarch64-tdep.c (aarch64_gdbarch_init): Likewise. * ada-exp.y (write_ambiguous_var): Likewise. * ada-lang.c (resolve_subexp): Likewise. (user_select_syms): Likewise. (assign_aggregate): Likewise. (ada_evaluate_subexp): Likewise. (cache_symbol): Likewise. * addrmap.c (allocate_key): Likewise. (addrmap_create_mutable): Likewise. * aix-thread.c (sync_threadlists): Likewise. * alpha-tdep.c (alpha_push_dummy_call): Likewise. (alpha_gdbarch_init): Likewise. * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise. * arm-linux-nat.c (arm_linux_add_process): Likewise. * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise. * arm-tdep.c (push_stack_item): Likewise. (arm_displaced_step_copy_insn): Likewise. (arm_gdbarch_init): Likewise. (_initialize_arm_tdep): Likewise. * avr-tdep.c (push_stack_item): Likewise. * ax-general.c (new_agent_expr): Likewise. * block.c (block_initialize_namespace): Likewise. * breakpoint.c (alloc_counted_command_line): Likewise. (update_dprintf_command_list): Likewise. (parse_breakpoint_sals): Likewise. (decode_static_tracepoint_spec): Likewise. (until_break_command): Likewise. (clear_command): Likewise. (update_global_location_list): Likewise. (get_breakpoint_objfile_data) Likewise. * btrace.c (ftrace_new_function): Likewise. (btrace_set_insn_history): Likewise. (btrace_set_call_history): Likewise. * buildsym.c (add_symbol_to_list): Likewise. (record_pending_block): Likewise. (start_subfile): Likewise. (start_buildsym_compunit): Likewise. (push_subfile): Likewise. (end_symtab_get_static_block): Likewise. (buildsym_init): Likewise. * cli/cli-cmds.c (source_command): Likewise. * cli/cli-decode.c (add_cmd): Likewise. * cli/cli-script.c (build_command_line): Likewise. (setup_user_args): Likewise. (realloc_body_list): Likewise. (process_next_line): Likewise. (copy_command_lines): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (read_pe_exported_syms): Likewise. * coffread.c (coff_locate_sections): Likewise. (coff_symtab_read): Likewise. (coff_read_struct_type): Likewise. * common/cleanups.c (make_my_cleanup2): Likewise. * common/common-exceptions.c (throw_it): Likewise. * common/filestuff.c (make_cleanup_close): Likewise. * common/format.c (parse_format_string): Likewise. * common/queue.h (DEFINE_QUEUE_P): Likewise. * compile/compile-object-load.c (munmap_list_add): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (append_args): Likewise. * corefile.c (specify_exec_file_hook): Likewise. * cp-support.c (make_symbol_overload_list): Likewise. * cris-tdep.c (push_stack_item): Likewise. (cris_gdbarch_init): Likewise. * ctf.c (ctf_trace_file_writer_new): Likewise. * dbxread.c (init_header_files): Likewise. (add_new_header_file): Likewise. (init_bincl_list): Likewise. (dbx_end_psymtab): Likewise. (start_psymtab): Likewise. (dbx_end_psymtab): Likewise. * dcache.c (dcache_init): Likewise. * dictionary.c (dict_create_hashed): Likewise. (dict_create_hashed_expandable): Likewise. (dict_create_linear): Likewise. (dict_create_linear_expandable): Likewise. * dtrace-probe.c (dtrace_process_dof_probe): Likewise. * dummy-frame.c (register_dummy_frame_dtor): Likewise. * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise. * dwarf2-frame.c (dwarf2_build_frame_info): Likewise. (decode_frame_entry_1): Likewise. * dwarf2expr.c (new_dwarf_expr_context): Likewise. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise. * dwarf2read.c (dwarf2_has_info): Likewise. (create_signatured_type_table_from_index): Likewise. (dwarf2_read_index): Likewise. (dw2_get_file_names_reader): Likewise. (create_all_type_units): Likewise. (read_cutu_die_from_dwo): Likewise. (init_tu_and_read_dwo_dies): Likewise. (init_cutu_and_read_dies): Likewise. (create_all_comp_units): Likewise. (queue_comp_unit): Likewise. (inherit_abstract_dies): Likewise. (read_call_site_scope): Likewise. (dwarf2_add_field): Likewise. (dwarf2_add_typedef): Likewise. (dwarf2_add_member_fn): Likewise. (attr_to_dynamic_prop): Likewise. (abbrev_table_alloc_abbrev): Likewise. (abbrev_table_read_table): Likewise. (add_include_dir): Likewise. (add_file_name): Likewise. (dwarf_decode_line_header): Likewise. (dwarf2_const_value_attr): Likewise. (dwarf_alloc_block): Likewise. (parse_macro_definition): Likewise. (set_die_type): Likewise. (write_psymtabs_to_index): Likewise. (create_cus_from_index): Likewise. (dwarf2_create_include_psymtab): Likewise. (process_psymtab_comp_unit_reader): Likewise. (build_type_psymtab_dependencies): Likewise. (read_comp_units_from_section): Likewise. (compute_compunit_symtab_includes): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (load_partial_dies): Likewise. (dwarf2_symbol_mark_computed): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_read_minimal_symbols): Likewise. * environ.c (make_environ): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * event-loop.c (create_file_handler): Likewise. (create_async_signal_handler): Likewise. (create_async_event_handler): Likewise. (create_timer): Likewise. * exec.c (build_section_table): Likewise. * fbsd-nat.c (fbsd_remember_child): Likewise. * fork-child.c (fork_inferior): Likewise. * frv-tdep.c (new_variant): Likewise. * gdbarch.sh (gdbarch_alloc): Likewise. (append_name): Likewise. * gdbtypes.c (rank_function): Likewise. (copy_type_recursive): Likewise. (add_dyn_prop): Likewise. * gnu-nat.c (make_proc): Likewise. (make_inf): Likewise. (gnu_write_inferior): Likewise. * gnu-v3-abi.c (build_gdb_vtable_type): Likewise. (build_std_type_info_type): Likewise. * guile/scm-param.c (compute_enum_list): Likewise. * guile/scm-utils.c (gdbscm_parse_function_args): Likewise. * guile/scm-value.c (gdbscm_value_call): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise. (read_unwind_info): Likewise. * ia64-tdep.c (ia64_gdbarch_init): Likewise. * infcall.c (dummy_frame_context_saver_setup): Likewise. (call_function_by_hand_dummy): Likewise. * infcmd.c (step_once): Likewise. (finish_forward): Likewise. (attach_command): Likewise. (notice_new_inferior): Likewise. * inferior.c (add_inferior_silent): Likewise. * infrun.c (add_displaced_stepping_state): Likewise. (save_infcall_control_state): Likewise. (save_inferior_ptid): Likewise. (_initialize_infrun): Likewise. * jit.c (bfd_open_from_target_memory): Likewise. (jit_gdbarch_data_init): Likewise. * language.c (add_language): Likewise. * linespec.c (decode_line_2): Likewise. * linux-nat.c (add_to_pid_list): Likewise. (add_initial_lwp): Likewise. * linux-thread-db.c (add_thread_db_info): Likewise. (record_thread): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_analyze_prologue): Likewise. * macrocmd.c (macro_define_command): Likewise. * macroexp.c (gather_arguments): Likewise. * macroscope.c (sal_macro_scope): Likewise. * macrotab.c (new_macro_table): Likewise. * mdebugread.c (push_parse_stack): Likewise. (parse_partial_symbols): Likewise. (parse_symbol): Likewise. (psymtab_to_symtab_1): Likewise. (new_block): Likewise. (new_psymtab): Likewise. (mdebug_build_psymtabs): Likewise. (add_pending): Likewise. (elfmdebug_build_psymtabs): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * mi/mi-main.c (mi_execute_command): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. * minidebug.c (lzma_open): Likewise. * minsyms.c (terminate_minimal_symbol_table): Likewise. * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_registers_info): Likewise. * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise. * nat/linux-btrace.c (linux_enable_bts): Likewise. (linux_enable_pt): Likewise. * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise. (linux_xfer_osdata_processgroups): Likewise. * nios2-tdep.c (nios2_gdbarch_init): Likewise. * nto-procfs.c (procfs_meminfo): Likewise. * objc-lang.c (start_msglist): Likewise. (selectors_info): Likewise. (classes_info): Likewise. (find_methods): Likewise. * objfiles.c (allocate_objfile): Likewise. (update_section_map): Likewise. * osabi.c (gdbarch_register_osabi): Likewise. (gdbarch_register_osabi_sniffer): Likewise. * parse.c (start_arglist): Likewise. * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise. (hwdebug_insert_point): Likewise. * printcmd.c (display_command): Likewise. (ui_printf): Likewise. * procfs.c (create_procinfo): Likewise. (load_syscalls): Likewise. (proc_get_LDT_entry): Likewise. (proc_update_threads): Likewise. * prologue-value.c (make_pv_area): Likewise. (pv_area_store): Likewise. * psymtab.c (extend_psymbol_list): Likewise. (init_psymbol_list): Likewise. (allocate_psymtab): Likewise. * python/py-inferior.c (add_thread_object): Likewise. * python/py-param.c (compute_enum_values): Likewise. * python/py-value.c (valpy_call): Likewise. * python/py-varobj.c (py_varobj_iter_next): Likewise. * python/python.c (ensure_python_env): Likewise. * record-btrace.c (record_btrace_start_replaying): Likewise. * record-full.c (record_full_reg_alloc): Likewise. (record_full_mem_alloc): Likewise. (record_full_end_alloc): Likewise. (record_full_core_xfer_partial): Likewise. * regcache.c (get_thread_arch_aspace_regcache): Likewise. * remote-fileio.c (remote_fileio_init_fd_map): Likewise. * remote-notif.c (remote_notif_state_allocate): Likewise. * remote.c (demand_private_info): Likewise. (remote_notif_stop_alloc_reply): Likewise. (remote_enable_btrace): Likewise. * reverse.c (save_bookmark_command): Likewise. * rl78-tdep.c (rl78_gdbarch_init): Likewise. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. * ser-go32.c (dos_get_tty_state): Likewise. (dos_copy_tty_state): Likewise. * ser-mingw.c (ser_windows_open): Likewise. (ser_console_wait_handle): Likewise. (ser_console_get_tty_state): Likewise. (make_pipe_state): Likewise. (net_windows_open): Likewise. * ser-unix.c (hardwire_get_tty_state): Likewise. (hardwire_copy_tty_state): Likewise. * solib-aix.c (solib_aix_new_lm_info): Likewise. * solib-dsbt.c (dsbt_current_sos): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (frv_current_sos): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_bfd_fopen): Likewise. * solib-svr4.c (lm_info_read): Likewise. (svr4_copy_library_list): Likewise. (svr4_default_sos): Likewise. * source.c (find_source_lines): Likewise. (line_info): Likewise. (add_substitute_path_rule): Likewise. * spu-linux-nat.c (spu_bfd_open): Likewise. * spu-tdep.c (info_spu_dma_cmdlist): Likewise. * stabsread.c (dbx_lookup_type): Likewise. (read_type): Likewise. (read_member_functions): Likewise. (read_struct_fields): Likewise. (read_baseclasses): Likewise. (read_args): Likewise. (_initialize_stabsread): Likewise. * stack.c (func_command): Likewise. * stap-probe.c (handle_stap_probe): Likewise. * symfile.c (addrs_section_sort): Likewise. (addr_info_make_relative): Likewise. (load_section_callback): Likewise. (add_symbol_file_command): Likewise. (init_filename_language_table): Likewise. * symtab.c (create_filename_seen_cache): Likewise. (sort_search_symbols_remove_dups): Likewise. (search_symbols): Likewise. * target.c (make_cleanup_restore_target_terminal): Likewise. * thread.c (new_thread): Likewise. (enable_thread_stack_temporaries): Likewise. (make_cleanup_restore_current_thread): Likewise. (thread_apply_all_command): Likewise. * tic6x-tdep.c (tic6x_gdbarch_init): Likewise. * top.c (gdb_readline_wrapper): Likewise. * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise. * tracepoint.c (trace_find_line_command): Likewise. (all_tracepoint_actions_and_cleanup): Likewise. (make_cleanup_restore_current_traceframe): Likewise. (get_uploaded_tp): Likewise. (get_uploaded_tsv): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_alloc_content): Likewise. (tui_add_content_elements): Likewise. * tui/tui-disasm.c (tui_find_disassembly_address): Likewise. (tui_set_disassem_content): Likewise. * ui-file.c (ui_file_new): Likewise. (stdio_file_new): Likewise. (tee_file_new): Likewise. * utils.c (make_cleanup_restore_integer): Likewise. (add_internal_problem_command): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * valops.c (find_oload_champ): Likewise. * value.c (allocate_value_lazy): Likewise. (record_latest_value): Likewise. (create_internalvar): Likewise. * varobj.c (install_variable): Likewise. (new_variable): Likewise. (new_root_variable): Likewise. (cppush): Likewise. (_initialize_varobj): Likewise. * windows-nat.c (windows_make_so): Likewise. * x86-nat.c (x86_add_process): Likewise. * xcoffread.c (arrange_linetable): Likewise. (allocate_include_entry): Likewise. (process_linenos): Likewise. (SYMBOL_DUP): Likewise. (xcoff_start_psymtab): Likewise. (xcoff_end_psymtab): Likewise. * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise. * xtensa-tdep.c (xtensa_register_type): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Likewise. (compile_bytecodes): Likewise. * dll.c (loaded_dll): Likewise. * event-loop.c (append_callback_event): Likewise. (create_file_handler): Likewise. (create_file_event): Likewise. * hostio.c (handle_open): Likewise. * inferiors.c (add_thread): Likewise. (add_process): Likewise. * linux-aarch64-low.c (aarch64_linux_new_process): Likewise. * linux-arm-low.c (arm_new_process): Likewise. (arm_new_thread): Likewise. * linux-low.c (add_to_pid_list): Likewise. (linux_add_process): Likewise. (handle_extended_wait): Likewise. (add_lwp): Likewise. (enqueue_one_deferred_signal): Likewise. (enqueue_pending_signal): Likewise. (linux_resume_one_lwp_throw): Likewise. (linux_resume_one_thread): Likewise. (linux_read_memory): Likewise. (linux_write_memory): Likewise. * linux-mips-low.c (mips_linux_new_process): Likewise. (mips_linux_new_thread): Likewise. (mips_add_watchpoint): Likewise. * linux-x86-low.c (initialize_low_arch): Likewise. * lynx-low.c (lynx_add_process): Likewise. * mem-break.c (set_raw_breakpoint_at): Likewise. (set_breakpoint): Likewise. (add_condition_to_breakpoint): Likewise. (add_commands_to_breakpoint): Likewise. (clone_agent_expr): Likewise. (clone_one_breakpoint): Likewise. * regcache.c (new_register_cache): Likewise. * remote-utils.c (look_up_one_symbol): Likewise. * server.c (queue_stop_reply): Likewise. (start_inferior): Likewise. (queue_stop_reply_callback): Likewise. (handle_target_event): Likewise. * spu-low.c (fetch_ppc_memory): Likewise. (store_ppc_memory): Likewise. * target.c (set_target_ops): Likewise. * thread-db.c (thread_db_load_search): Likewise. (try_thread_db_load_1): Likewise. * tracepoint.c (add_tracepoint): Likewise. (add_tracepoint_action): Likewise. (create_trace_state_variable): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtro): Likewise. (add_while_stepping_state): Likewise. * win32-low.c (child_add_thread): Likewise. (get_image_name): Likewise.
2015-08-21Warn when accessing binaries from remote targetsGary Benson1-1/+2
GDB provides no indicator of progress during file operations, and can appear to have locked up during slow remote transfers. This commit updates GDB to print a warning each time a file is accessed over RSP. An additional message detailing how to avoid remote transfers is printed for the first transfer only. gdb/ChangeLog: * target.h (struct target_ops) <to_fileio_open>: New argument warn_if_slow. Update comment. All implementations updated. (target_fileio_open_warn_if_slow): New declaration. * target.c (target_fileio_open): Renamed as... (target_fileio_open_1): ...this. New argument warn_if_slow. Pass warn_if_slow to implementation. Update debug printing. (target_fileio_open): New function. (target_fileio_open_warn_if_slow): Likewise. * gdb_bfd.c (gdb_bfd_iovec_fileio_open): Use new function target_fileio_open_warn_if_slow. gdb/testsuite/ChangeLog: * gdb.trace/pending.exp: Cope with remote transfer warnings.
2015-08-18x86/Linux: disable all-stop on top of non-stopPedro Alves1-0/+2
Markus reported that ASNS breaks target record-btrace. In particular, the gdb.btrace/multi-thread-step.exp test fails (both with BTS and PT tracing) with a crash in py-inferior.c: Program received signal SIGSEGV, Segmentation fault. 0x00000000006aa40d in add_thread_object (tp=0x27d32d0) at /users/mmetzger/team/gdb/git/gdb/python/py-inferior.c:337 337 entry->next = inf_obj->threads; My machine doesn't support BTS nor PT, so I missed this... Disabling ASNS temporarily on x86 until this is addressed. Tested on x86_64 Fedora 20. gdb/ChangeLog: 2015-08-18 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_nat_always_non_stop_p): If the linux_ops target implements to_always_non_stop_p, call it. * x86-linux-nat.c (x86_linux_always_non_stop_p): New function. (x86_linux_create_target): Install it as to_always_non_stop_p method.
2015-08-07native Linux: enable always non-stop by defaultPedro Alves1-1/+1
The testsuite shows no regressions with this forced on, on: - Native x86_64 Fedora 20, with and output "set displaced off". - Native x86_64 Fedora 20, on top of x86 software single-step series. - PPC64 Fedora 18. - S/390 RHEL 7.1. Let's try making it the default. gdb/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_nat_always_non_stop_p): Return 1.
2015-08-07Fix interrupt-noterm.exp on targets always in non-stopPedro Alves1-3/+9
With "maint set target-non-stop on" we get: @@ -66,13 +66,16 @@ Continuing. interrupt (gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt -Program received signal SIGINT, Interrupt. -PASS: gdb.base/interrupt-noterm.exp: inferior received SIGINT -testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 0 seconds +[process 12119] #1 stopped. +0x0000003615ebc6d0 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:81 +81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS) +FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT (timeout) +testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 10 seconds That is, we get "[$thread] #1 stopped" instead of SIGINT. The issue is that we don't currently distinguish send "interrupt/ctrl-c" to target terminal vs "stop/pause" thread well; both cases go through "target_stop". And then, the native Linux backend (linux-nat.c) implements target_stop with SIGSTOP in non-stop mode, and SIGINT in all-stop mode. Since "maint set target-non-stop on" forces the backend to be always running in non-stop mode, even though the user-visible behavior is "set non-stop" is "off", "interrupt" causes a SIGSTOP instead of the SIGINT the test expects. Fix this by introducing a target_interrupt method to use in the "interrupt/ctrl-c" case, so "set non-stop off" can always work the same irrespective of "maint set target-non-stop on/off". I'm explictly considering changing the "set non-stop on" behavior as out of scope here. Most of the patch is an across-the-board rename of to_stop hook implementations to to_interrupt. The only targets where something more than a rename is being done are linux-nat.c and remote.c, which are the only targets that support async, and thus are the only ones the core side calls target_stop on. gdb/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * darwin-nat.c (darwin_stop): Rename to ... (darwin_interrupt): ... this. (_initialize_darwin_inferior): Adjust. * gnu-nat.c (gnu_stop): Delete. (gnu_target): Don't install gnu_stop. * inf-ptrace.c (inf_ptrace_stop): Rename to ... (inf_ptrace_interrupt): ... this. (inf_ptrace_target): Adjust. * infcmd.c (interrupt_target_1): Use target_interrupt instead of target_stop. * linux-nat (linux_nat_stop): Rename to ... (linux_nat_interrupt): ... this. (linux_nat_stop): Reimplement. (linux_nat_add_target): Install linux_nat_interrupt. * nto-procfs.c (nto_interrupt_twice): Rename to ... (nto_handle_sigint_twice): ... this. (nto_interrupt): Rename to ... (nto_handle_sigint): ... this. Call target_interrupt instead of target_stop. (procfs_wait): Adjust. (procfs_stop): Rename to ... (procfs_interrupt): ... this. (init_procfs_targets): Adjust. * procfs.c (procfs_stop): Rename to ... (procfs_interrupt): ... this. (procfs_target): Adjust. * remote-m32r-sdi.c (m32r_stop): Rename to ... (m32r_interrupt): ... this. (init_m32r_ops): Adjust. * remote-sim.c (gdbsim_stop_inferior): Rename to ... (gdbsim_interrupt_inferior): ... this. (gdbsim_stop): Rename to ... (gdbsim_interrupt): ... this. (gdbsim_cntrl_c): Adjust. (init_gdbsim_ops): Adjust. * remote.c (sync_remote_interrupt): Adjust comments. (remote_stop_as): Rename to ... (remote_interrupt_as): ... this. (remote_stop): Adjust comment. (remote_interrupt): New function. (init_remote_ops): Install remote_interrupt. * target.c (target_interrupt): New function. * target.h (struct target_ops) <to_interrupt>: New field. (target_interrupt): New declaration. * windows-nat.c (windows_stop): Rename to ... (windows_interrupt): ... this. * target-delegates.c: Regenerate.
2015-08-07Implement all-stop on top of a target running non-stop modePedro Alves1-8/+17
This finally implements user-visible all-stop mode running with the target_ops backend always in non-stop mode. This is a stepping stone towards finer-grained control of threads, being able to do interesting things like thread groups, associating groups with breakpoints, etc. From the user's perspective, all-stop mode is really just a special case of being able to stop and resume specific sets of threads, so it makes sense to do this step first. With this, even in all-stop, the target is no longer in charge of stopping all threads before reporting an event to the core -- the core takes care of it when it sees fit. For example, when "next"- or "step"-ing, we can avoid stopping and resuming all threads at each internal single-step, and instead only stop all threads when we're about to present the stop to the user. The implementation is almost straight forward, as the heavy lifting has been done already in previous patches. Basically, we replace checks for "set non-stop on/off" (the non_stop global), with calls to a new target_is_non_stop_p function. In a few places, if "set non-stop off", we stop all threads explicitly, and in a few other places we resume all threads explicitly, making use of existing methods that were added for teaching non-stop to step over breakpoints without displaced stepping. This adds a new "maint set target-non-stop on/off/auto" knob that allows both disabling the feature if we find problems, and force-enable it for development (useful when teaching a target about this. The default is "auto", which means the feature is enabled if a new target method says it should be enabled. The patch implements the method in linux-nat.c, just for illustration, because it still returns false. We'll need a few follow up fixes before turning it on by default. This is a separate target method from indicating regular non-stop support, because e.g., while e.g., native linux-nat.c is close to regression free with all-stop-non-stop (with following patches will fixing the remaining regressions), remote.c+gdbserver will still need more fixing, even though it supports "set non-stop on". Tested on x86_64 Fedora 20, native, with and without "set displaced off", and with and without "maint set target-non-stop on"; and also against gdbserver. gdb/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * NEWS: Mention "maint set/show target-non-stop". * breakpoint.c (update_global_location_list): Check target_is_non_stop_p instead of non_stop. * infcmd.c (attach_command_post_wait, attach_command): Likewise. * infrun.c (show_can_use_displaced_stepping) (can_use_displaced_stepping_p, start_step_over_inferior): Likewise. (internal_resume_ptid): New function. (resume): Use it. (proceed): Check target_is_non_stop_p instead of non_stop. If in all-stop mode but the target is always in non-stop mode, start all the other threads that are implicitly resumed too. (for_each_just_stopped_thread, fetch_inferior_event) (adjust_pc_after_break, stop_all_threads): Check target_is_non_stop_p instead of non_stop. (handle_inferior_event): Likewise. Handle detach-fork in all-stop with the target always in non-stop mode. (handle_signal_stop) <random signal>: Check target_is_non_stop_p instead of non_stop. (switch_back_to_stepped_thread): Check target_is_non_stop_p instead of non_stop. (keep_going_stepped_thread): Use internal_resume_ptid. (stop_waiting): If in all-stop mode, and the target is in non-stop mode, stop all threads. (keep_going_pass): Likewise, when starting a new in-line step-over sequence. * linux-nat.c (get_pending_status, select_event_lwp) (linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check target_is_non_stop_p instead of non_stop. (linux_nat_always_non_stop_p): New function. (linux_nat_stop): Check target_is_non_stop_p instead of non_stop. (linux_nat_add_target): Install linux_nat_always_non_stop_p. * target-delegates.c: Regenerate. * target.c (target_is_non_stop_p): New function. (target_non_stop_enabled, target_non_stop_enabled_1): New globals. (maint_set_target_non_stop_command) (maint_show_target_non_stop_command): New functions. (_initilize_target): Install "maint set/show target-non-stop" commands. * target.h (struct target_ops) <to_always_non_stop_p>: New field. (target_non_stop_enabled): New declaration. (target_is_non_stop_p): New declaration. gdb/doc/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * gdb.texinfo (Maintenance Commands): Document "maint set/show target-non-stop".
2015-07-31Mostly trivial enum fixesSimon Marchi1-1/+1
This is a patch I extracted from Pedro's C++ branch. It contains the most trivial enum fixes, where an integer type/value was used instead of the appropriate enum type/value. It fixes many C++ errors, since in C++ you can't mix integers and enums implicitely. Regardless of the C++ conversion, I think this is a good cleanup to make use of the appropriate enum types. Regression-tested on native x86_64. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum type or value instead of integer. (aarch64_linux_insert_watchpoint): Likewise. (aarch64_linux_remove_watchpoint): Likewise. * ada-lang.c (ada_op_print_tab): Likewise. * amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise. (amd64_linux_syscall_record_common): Likewise. * arch-utils.c (target_byte_order_user): Likewise. (default_byte_order): Likewise. * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise. (arm_linux_get_hwbp_type): Likewise. (arm_linux_hw_watchpoint_initialize): Likewise. (arm_linux_insert_watchpoint): Likewise. * arm-linux-tdep.c (arm_canonicalize_syscall): Likewise. (arm_linux_syscall_record): Likewise. * breakpoint.c (update_watchpoint): Likewise. (breakpoint_here_p): Likewise. (bpstat_print): Likewise. (enable_breakpoint_disp): Likewise. * c-lang.c (c_op_print_tab): Likewise. * cli/cli-decode.c (add_info_alias): Likewise. * d-lang.c (d_op_print_tab): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * f-exp.y (dot_ops): Likewise. (f77_keywords): Likewise. * f-lang.c (f_op_print_tab): Likewise. * go-lang.c (go_op_print_tab): Likewise. * guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise. * guile/scm-cmd.c (gdbscm_make_command): Likewise. * guile/scm-param.c (gdbscm_make_parameter): Likewise. * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise. * guile/scm-string.c (struct scm_to_stringn_data): Likewise. (struct scm_from_stringn_data): Likewise. * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise. * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise. (ia64_linux_remove_watchpoint): Likewise. (ia64_linux_can_use_hw_breakpoint): Likewise. * infrun.c (print_stop_event): Likewise. * jv-lang.c (java_op_print_tab): Likewise. * linux-nat.c (linux_proc_xfer_partial): Likewise. * linux-nat.h (struct lwp_info): Likewise. * linux-thread-db.c (enable_thread_event): Likewise. * m2-lang.c (m2_op_print_tab): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_variables): Likewise. * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise. * mi/mi-out.c (mi_table_begin): Likewise. (mi_table_header): Likewise. * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise. (mips_linux_insert_watchpoint): Likewise. (mips_linux_remove_watchpoint): Likewise. * nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise. * nat/mips-linux-watch.h (struct mips_watchpoint): Likewise. (mips_linux_watch_type_to_irw): Likewise. * nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise. (procfs_insert_hw_watchpoint): Likewise. (procfs_remove_hw_watchpoint): Likewise. (procfs_hw_watchpoint): Likewise. (procfs_can_use_hw_breakpoint): Likewise. (procfs_remove_hw_watchpoint): Likewise. (procfs_insert_hw_watchpoint): Likewise. * p-lang.c (pascal_op_print_tab): Likewise. * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise. * ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise. * procfs.c (procfs_can_use_hw_breakpoint): Likewise. (procfs_insert_watchpoint): Likewise. (procfs_remove_watchpoint): Likewise. * psymtab.c (recursively_search_psymtabs): Likewise. * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise. (m32r_insert_watchpoint): Likewise. * remote-mips.c (mips_can_use_watchpoint): Likewise. (mips_insert_watchpoint): Likewise. (mips_remove_watchpoint): Likewise. * remote.c (watchpoint_to_Z_packet): Likewise. (remote_insert_watchpoint): Likewise. (remote_remove_watchpoint): Likewise. (remote_check_watch_resources): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. (s390_remove_watchpoint): Likewise. (s390_can_use_hw_breakpoint): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise. * target.h (struct target_ops): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue): Likewise. * ui-out.c (struct ui_out_hdr): Likewise. (append_header_to_list): Likewise. (get_next_header): Likewise. (verify_field): Likewise. (ui_out_begin): Likewise. (ui_out_field_int): Likewise. (ui_out_field_fmt_int): Likewise. (ui_out_field_skip): Likewise. (ui_out_field_string): Likewise. (ui_out_field_fmt): Likewise. * varobj.c (new_variable): Likewise. * x86-nat.c (x86_insert_watchpoint): Likewise. (x86_remove_watchpoint): Likewise. (x86_can_use_hw_breakpoint): Likewise. * xtensa-tdep.h (struct gdbarch_tdep): Likewise. * inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to previously anonymous enumeration type.. * linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall value. * target-debug.h (target_debug_print_enum_target_hw_bp_type): New. (target_debug_print_enum_bptype): New. * target-delegates.c: Regenerate.
2015-07-30PR threads/18600: Inferiors left around after fork+thread spawnPedro Alves1-0/+14
The new gdb.threads/fork-plus-threads.exp test exposes one more problem. When one types "info inferiors" after running the program, one see's a couple inferior left still, while there should only be inferior #1 left. E.g.: (gdb) info inferiors Num Description Executable 4 process 8393 /home/pedro/bugs/src/test 2 process 8388 /home/pedro/bugs/src/test * 1 <null> /home/pedro/bugs/src/test (gdb) info threads Calling prune_inferiors() manually at this point (from a top gdb) does not remove them, because they still have inf->pid != 0 (while they shouldn't). This suggests that we never mourned those inferiors. Enabling logs (master + previous patch) we see: ... WL: waitpid Thread 0x7ffff7fc2740 (LWP 9513) received Trace/breakpoint trap (stopped) WL: Handling extended status 0x03057f LHEW: Got clone event from LWP 9513, new child is LWP 9579 [New Thread 0x7ffff37b8700 (LWP 9579)] WL: waitpid Thread 0x7ffff7fc2740 (LWP 9508) received 0 (exited) WL: Thread 0x7ffff7fc2740 (LWP 9508) exited. ^^^^^^^^ [Thread 0x7ffff7fc2740 (LWP 9508) exited] WL: waitpid Thread 0x7ffff7fc2740 (LWP 9499) received 0 (exited) WL: Thread 0x7ffff7fc2740 (LWP 9499) exited. [Thread 0x7ffff7fc2740 (LWP 9499) exited] RSRL: resuming stopped-resumed LWP Thread 0x7ffff37b8700 (LWP 9579) at 0x3615ef4ce1: step=0 ... (gdb) info inferiors Num Description Executable 5 process 9508 /home/pedro/bugs/src/test ^^^^ 4 process 9503 /home/pedro/bugs/src/test 3 process 9500 /home/pedro/bugs/src/test 2 process 9499 /home/pedro/bugs/src/test * 1 <null> /home/pedro/bugs/src/test (gdb) ... Note the "Thread 0x7ffff7fc2740 (LWP 9508) exited." line. That's this in wait_lwp: /* Check if the thread has exited. */ if (WIFEXITED (status) || WIFSIGNALED (status)) { thread_dead = 1; if (debug_linux_nat) fprintf_unfiltered (gdb_stdlog, "WL: %s exited.\n", target_pid_to_str (lp->ptid)); } } That was the leader thread reporting an exit, meaning the whole process is gone. So the problem is that this code doesn't understand that an WIFEXITED status of the leader LWP should be reported to infrun as process exit. gdb/ChangeLog: 2015-07-30 Pedro Alves <palves@redhat.com> PR threads/18600 * linux-nat.c (wait_lwp): Report to the core when thread group leader exits. gdb/testsuite/ChangeLog: 2015-07-30 Pedro Alves <palves@redhat.com> PR threads/18600 * gdb.threads/fork-plus-threads.exp: Test that "info inferiors" only shows inferior 1.
2015-07-30PR threads/18600: Threads left stopped after fork+thread spawnPedro Alves1-56/+41
When a program forks and another process start threads while gdb is handling the fork event, newly created threads are left stuck stopped by gdb, even though gdb presents them as "running", to the user. This can be seen with the test added by this patch. The test has the inferior fork a certain number of times and waits for all children to exit. Each fork child spawns a number of threads that do nothing and joins them immediately. Normally, the program should run unimpeded (from the point of view of the user) and exit very quickly. Without this fix, it doesn't because of some threads left stopped by gdb, so inferior 1 never exits. The program triggers when a new clone thread is found while inside the linux_stop_and_wait_all_lwps call in linux-thread-db.c: linux_stop_and_wait_all_lwps (); ALL_LWPS (lp) if (ptid_get_pid (lp->ptid) == pid) thread_from_lwp (lp->ptid); linux_unstop_all_lwps (); Within linux_stop_and_wait_all_lwps, we reach linux_handle_extended_wait with the "stopping" parameter set to 1, and because of that we don't mark the new lwp as resumed. As consequence, the subsequent resume_stopped_resumed_lwps, called from linux_unstop_all_lwps, never resumes the new LWP. There's lots of cruft in linux_handle_extended_wait that no longer makes sense. On systems with CLONE events support, we don't rely on libthread_db for thread listing anymore, so the code that preserves stop_requested and the handling of last_resume_kind is all dead. So the fix is to remove all that, and simply always mark the new LWP as resumed, so that resume_stopped_resumed_lwps re-resumes it. gdb/ChangeLog: 2015-07-30 Pedro Alves <palves@redhat.com> Simon Marchi <simon.marchi@ericsson.com> PR threads/18600 * linux-nat.c (linux_handle_extended_wait): On CLONE event, always mark the new thread as resumed. Remove STOPPING parameter. (wait_lwp): Adjust call to linux_handle_extended_wait. (linux_nat_filter_event): Adjust call to linux_handle_extended_wait. (resume_stopped_resumed_lwps): Add debug output. gdb/testsuite/ChangeLog: 2015-07-30 Simon Marchi <simon.marchi@ericsson.com> Pedro Alves <palves@redhat.com> PR threads/18600 * gdb.threads/fork-plus-threads.c: New file. * gdb.threads/fork-plus-threads.exp: New file.
2015-07-24PR gdb/18717: internal error if non-leader thread exits processPedro Alves1-4/+6
If a non-leader thread exits the process while all other threads are ptrace-stopped, native gdb fails an assertion. The test added by this commit catches it: /home/pedro/gdb/mygit/build/../src/gdb/linux-nat.c:3198: internal-error: linux_nat_filter_event: Assertion `lp->resumed' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) FAIL: gdb.threads/non-leader-exit-process.exp: program exits normally (GDB internal error) The fix is just to remove the assertion. With that out of the way, neither GDB not GDBserver handle this perfectly though, so I'm adding a KFAIL: (gdb) continue Continuing. [Thread 0x7ffff7fc0700 (LWP 15350) exited] No unwaited-for children left. Couldn't get registers: No such process. (gdb) KFAIL: gdb.threads/non-ldr-exit.exp: program exits normally (PRMS: gdb/18717) gdb/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> PR gdb/18717 * linux-nat.c (linux_nat_filter_event): Don't assert that the lwp is resumed, and extend the debug log. gdb/testsuite/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> PR gdb/18717 * gdb.threads/non-ldr-exit.c: New file. * gdb.threads/non-ldr-exit.exp: New file.
2015-07-24Linux: sys/ptrace.h -> nat/gdb_ptrace.h everywherePedro Alves1-1/+1
So that we pick the enum __ptrace_request fix everywhere. gdb/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of sys/ptrace.h. * alpha-linux-nat.c: Likewise. * amd64-linux-nat.c: Likewise. * arm-linux-nat.c: Likewise. * hppa-linux-nat.c: Likewise. * i386-linux-nat.c: Likewise. * ia64-linux-nat.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * m32r-linux-nat.c: Likewise. * m68klinux-nat.c: Likewise. * mips-linux-nat.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-ptrace.h * nat/mips-linux-watch.c: Likewise. * nat/x86-linux-dregs.c: Likewise. * ppc-linux-nat.c: Likewise. * s390-linux-nat.c: Likewise. * spu-linux-nat.c: Likewise. * tilegx-linux-nat.c: Likewise. * x86-linux-nat.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.c: Likewise.om> * linux-aarch64-low.c: Include nat/gdb_ptrace.h instead of sys/ptrace.h. * linux-arm-low.c: Likewise. * linux-cris-low.c: Likewise. * linux-crisv32-low.c: Likewise. * linux-low.c: Likewise. * linux-m68k-low.c: Likewise. * linux-mips-low.c: Likewise. * linux-nios2-low.c: Likewise. * linux-s390-low.c: Likewise. * linux-sparc-low.c: Likewise. * linux-tic6x-low.c: Likewise. * linux-tile-low.c: Likewise. * linux-x86-low.c: Likewise.
2015-06-23Convert have_ptrace_getregset to a tri-state booleanYao Qi1-1/+1
have_ptrace_getregset is a tri-state variable (-1, 0, 1), and we have some conditions like "if (have_ptrace_getregset)", which is not correct. I'll explain why it is not correct in the following example. This fix to this problem to replace the test (have_ptrace_getregset) to test (have_ptrace_getregset == 1) or (have_ptrace_getregset == -1) etc. However Doug thinks it hinders readability https://sourceware.org/ml/gdb-patches/2015-05/msg00692.html so I decide to add a new enum tribool and change have_ptrace_getregset to it, in order to make these tests more readable. have_ptrace_getregset is initialised to -1, and is adjusted to 0 or 1 in $ARCH_linux_read_description according to the capability of the kernel. However, it is possible that have_ptrace_getregset is used before it is set to 0 or 1, which means it is still -1. This is shown below. (gdb) run Starting program: gdb/testsuite/gdb.base/break Breakpoint 2, amd64_linux_fetch_inferior_registers (ops=0xceaa80, regcache=0xe72000, regnum=16) at git/gdb/amd64-linux-nat.c:128 128 { top?p have_ptrace_getregset $1 = TRIBOOL_UNKNOWN top?c Continuing. Breakpoint 2, amd64_linux_fetch_inferior_registers (ops=0xceaa80, regcache=0xe72000, regnum=16) at git/gdb/amd64-linux-nat.c:128 128 { top?c Continuing. Breakpoint 1, x86_linux_read_description (ops=0xceaa80) at git/gdb/x86-linux-nat.c:117 117 { PTRACE_GETREGSET command is used even GDB doesn't know whether PTRACE_GETREGSET is supported or not. It is wrong, but works on x86. However it doesn't work on arm-linux if the kernel doesn't support PTRACE_GETREGSET at all. We'll get: (gdb) run Starting program: gdb/testsuite/gdb.base/break warning: Unable to fetch general register. PC register is not available gdb: 2015-06-23 Yao Qi <yao.qi@linaro.org> * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly. (amd64_linux_store_inferior_registers): Likewise. * arm-linux-nat.c (fetch_fpregister): Likewise. (fetch_fpregs, store_fpregister): Likewise. (store_fpregister, store_fpregs): Likewise. (fetch_register, fetch_regs): Likewise. (store_register, store_regs): Likewise. (fetch_vfp_regs, store_vfp_regs): Likewise. (arm_linux_read_description): Check have_ptrace_getregset is TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE or TRIBOOL_FALSE. * i386-linux-nat.c (fetch_xstateregs): Check have_ptrace_getregset is not TRIBOOL_TRUE. (store_xstateregs): Likewise. * linux-nat.c (have_ptrace_getregset): Change its type to enum tribool. * linux-nat.h (tribool): New enum. * x86-linux-nat.c (x86_linux_read_description): Use enum tribool. Check whether have_ptrace_getregset is TRIBOOL_TRUE.
2015-06-10Implement mount namespace support for native Linux targetsGary Benson1-0/+114
This commit allows GDB to access executables and shared libraries on native Linux targets where GDB and the inferior have different mount namespaces. gdb/ChangeLog: * linux-nat.c (nat/linux-namespaces.h): New include. (fileio.h): Likewise. (linux_nat_filesystem_is_local): New function. (linux_nat_fileio_pid_of): Likewise. (linux_nat_fileio_open): Likewise. (linux_nat_fileio_readlink): Likewise. (linux_nat_fileio_unlink): Likewise. (linux_nat_add_target): Initialize to_filesystem_is_local, to_fileio_open, to_fileio_readlink and to_fileio_unlink. (_initialize_linux_nat): New "set/show debug linux-namespaces" commands. * NEWS: Mention new "set/show debug linux-namespaces" commands. gdb/doc/ChangeLog: * gdb.texinfo (Debugging Output): Document the "set/show debug linux-namespaces" command.
2015-06-01Move have_ptrace_getregset to linux-nat.cYao Qi1-0/+3
I'll let arm-linux-nat.c to use PTRACE_GETREGSET if kernel supports, so this patch is to move have_ptrace_getregset from x86-linux-nat.c to linux-nat.c. gdb: 2015-06-01 Yao Qi <yao.qi@linaro.org> * x86-linux-nat.c (have_ptrace_getregset): Move it to ... * linux-nat.c: ... here. * x86-linux-nat.h (have_ptrace_getregset): Move the declaration to ... * linux-nat.h: ... here.
2015-05-12Extended-remote Linux follow forkDon Breazeal1-11/+26
This patch implements basic support for follow-fork and detach-on-fork on extended-remote Linux targets. Only 'fork' is supported in this patch; 'vfork' support is added n a subsequent patch. This patch depends on the previous patches in the patch series. Sufficient extended-remote functionality has been implemented here to pass gdb.base/multi-forks.exp, as well as gdb.base/foll-fork.exp with the catchpoint tests commented out. Some other fork tests fail with this patch because it doesn't provide the architecture support needed for watchpoint inheritance or fork catchpoints. The implementation follows the same general structure as for the native implementation as much as possible. This implementation includes: * enabling fork events in linux-low.c in initialize_low and linux_enable_extended_features * handling fork events in gdbserver/linux-low.c:handle_extended_wait - when a fork event occurs in gdbserver, we must do the full creation of the new process, thread, lwp, and breakpoint lists. This is required whether or not the new child is destined to be detached-on-fork, because GDB will make target calls that require all the structures. In particular we need the breakpoint lists in order to remove the breakpoints from a detaching child. If we are not detaching the child we will need all these structures anyway. - as part of this event handling we store the target_waitstatus in a new member of the parent lwp_info structure, 'waitstatus'. This is used to store extended event information for reporting to GDB. - handle_extended_wait is given a return value, denoting whether the handled event should be reported to GDB. Previously it had only handled clone events, which were never reported. * using a new predicate in gdbserver to control handling of the fork event (and eventually all extended events) in linux_wait_1. The predicate, extended_event_reported, checks a target_waitstatus.kind for an extended ptrace event. * implementing a new RSP 'T' Stop Reply Packet stop reason: "fork", in gdbserver/remote-utils.c and remote.c. * implementing new target and RSP support for target_follow_fork with target extended-remote. (The RSP components were actually defined in patch 1, but they see their first use here). - remote target routine remote_follow_fork, which just sends the 'D;pid' detach packet to detach the new fork child cleanly. We can't just call target_detach because the data structures for the forked child have not been allocated on the host side. Tested on x64 Ubuntu Lucid, native, remote, extended-remote. gdb/gdbserver/ChangeLog: * linux-low.c (handle_extended_wait): Implement return value, rename argument 'event_child' to 'event_lwp', handle PTRACE_EVENT_FORK, call internal_error for unrecognized event. (linux_low_ptrace_options): New function. (linux_low_filter_event): Call linux_low_ptrace_options, use different argument fo linux_enable_event_reporting, use return value from handle_extended_wait. (extended_event_reported): New function. (linux_wait_1): Call extended_event_reported and set status to report fork events. (linux_write_memory): Add pid to debug message. (reset_lwp_ptrace_options_callback): New function. (linux_handle_new_gdb_connection): New function. (linux_target_ops): Initialize new structure member. * linux-low.h (struct lwp_info) <waitstatus>: New member. * lynx-low.c: Initialize new structure member. * remote-utils.c (prepare_resume_reply): Implement stop reason "fork" for "T" stop message. * server.c (handle_query): Call handle_new_gdb_connection. * server.h (report_fork_events): Declare global flag. * target.h (struct target_ops) <handle_new_gdb_connection>: New member. (target_handle_new_gdb_connection): New macro. * win32-low.c: Initialize new structure member. gdb/ChangeLog: * linux-nat.c (linux_nat_ptrace_options): New function. (linux_init_ptrace, wait_lwp, linux_nat_filter_event): Call linux_nat_ptrace_options and use different argument to linux_enable_event_reporting. (_initialize_linux_nat): Delete call to linux_ptrace_set_additional_flags. * nat/linux-ptrace.c (current_ptrace_options): Rename to supported_ptrace_options. (additional_flags): Delete variable. (linux_check_ptrace_features): Use supported_ptrace_options. (linux_test_for_tracesysgood, linux_test_for_tracefork): Likewise, and remove additional_flags check. (linux_enable_event_reporting): Change 'attached' argument to 'options'. Use supported_ptrace_options. (ptrace_supports_feature): Change comment. Use supported_ptrace_options. (linux_ptrace_set_additional_flags): Delete function. * nat/linux-ptrace.h (linux_ptrace_set_additional_flags): Delete function prototype. * remote.c (remote_fork_event_p): New function. (remote_detach_pid): New function. (remote_detach_1): Call remote_detach_pid, don't mourn inferior if doing detach-on-fork. (remote_follow_fork): New function. (remote_parse_stop_reply): Handle new "T" stop reason "fork". (remote_pid_to_str): Print "process" strings for pid/0/0 ptids. (init_extended_remote_ops): Initialize to_follow_fork.
2015-04-17Introduce linux_proc_pid_to_exec_fileGary Benson1-9/+1
This commit introduces a new function linux_proc_pid_to_exec_file that shared Linux code can use to discover the filename of the executable that was run to create a process on the system. gdb/ChangeLog: * nat/linux-procfs.h (linux_proc_pid_to_exec_file): New declaration. * nat/linux-procfs.c (linux_proc_pid_to_exec_file): New function, factored out from... * linux-nat.c (linux_child_pid_to_exec_file): ...here.
2015-04-07update thread list, delete exited threadsPedro Alves1-0/+18
On GNU/Linux, if the running kernel supports clone events, then linux-thread-db.c defers thread listing to the target beneath: static void thread_db_update_thread_list (struct target_ops *ops) { ... if (target_has_execution && !thread_db_use_events ()) ops->beneath->to_update_thread_list (ops->beneath); else thread_db_update_thread_list_td_ta_thr_iter (ops); ... } However, when live debugging, the target beneath, linux-nat.c, does not implement the to_update_thread_list method. The result is that if a thread is marked exited (because it can't be deleted right now, e.g., it was the selected thread), then it won't ever be deleted, until the process exits or is killed/detached. A similar thing happens with the remote.c target. Because its target_update_thread_list implementation skips exited threads when it walks the current thread list looking for threads that no longer exits on the target side, using ALL_NON_EXITED_THREADS_SAFE, stale exited threads are never deleted. This is not a big deal -- I can't think of any way this might be user visible, other than gdb's memory growing a tiny bit whenever a thread gets stuck in exited state. Still, might as well clean things up properly. All other targets use prune_threads, so are unaffected. The fix adds a ALL_THREADS_SAFE macro, that like ALL_NON_EXITED_THREADS_SAFE, walks the thread list and allows deleting the iterated thread, and uses that in places that are walking the thread list in order to delete threads. Actually, after converting linux-nat.c and remote.c to use this, we find the only other user of ALL_NON_EXITED_THREADS_SAFE is also walking the list to delete threads. So we convert that too, and end up deleting ALL_NON_EXITED_THREADS_SAFE. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ChangeLog 2015-04-07 Pedro Alves <palves@redhat.com> * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ... (ALL_THREADS_SAFE): ... this, and don't skip exited threads. (delete_exited_threads): New declaration. * infrun.c (follow_exec): Use ALL_THREADS_SAFE. * linux-nat.c (linux_nat_update_thread_list): New function. (linux_nat_add_target): Install it. * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE. * thread.c (prune_threads): Use ALL_THREADS_SAFE. (delete_exited_threads): New function.
2015-04-01linux_nat.c: Mark new thread running even if momentarily pausingPedro Alves1-1/+4
My all-stop-on-top-of-non-stop series manages to trip on a bug in the linux-nat.c backend while running the testsuite. If a thread is discovered while threads are being momentarily paused (without the core's intervention), the thread ends up stuck in THREAD_STOPPED state, even though from the user's perspective, the thread is running even while it is paused. From inspection, in the current sources, this can happen if we call stop_and_resume_callback, though there's no way to test that with current Linux kernels. (While trying to come up with test to exercise this, I stumbled on: https://sourceware.org/ml/gdb-patches/2015-03/msg00850.html ... which does include a non-trivial test, so I think I can still claim I come out net positive. :-) ) Tested on x86_64 Fedora 20. gdb/ChangeLog: 2015-04-01 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_handle_extended_wait): Always call set_running.
2015-03-25Simplify target_async hook interfacePedro Alves1-18/+7
All callers of target_async pass it the same callback (inferior_event_handler). Since both common code and target backends need to be able to put the target in and out of target async mode at any given time, there's really no way that a different callback could be passed. This commit simplifies things, and removes the indirection altogether. Bonus: with this, gdb's target_async method ends up with the same signature as gdbserver's. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-25 Pedro Alves <palves@redhat.com> * target.h <to_async>: Replace 'callback' and 'context' parameters with boolean 'enable' parameter. (target_async): Replace CALLBACK and CONTEXT parameters with boolean ENABLE parameter. * inf-loop.c (inferior_event_handler): Adjust. * linux-nat.c (linux_nat_attach, linux_nat_resume) (linux_nat_resume): Adjust. (async_client_callback, async_client_context): Delete. (handle_target_event): Call inferior_event_handler directly. (linux_nat_async): Replace 'callback' and 'context' parameters with boolean 'enable' parameter. Adjust. Remove references to async_client_callback and async_client_context. (linux_nat_close): Adjust. * record-btrace.c (record_btrace_async): Replace 'callback' and 'context' parameters with boolean 'enable' parameter. Adjust. (record_btrace_resume): Adjust. * record-full.c (record_full_async): Replace 'callback' and 'context' parameters with boolean 'enable' parameter. Adjust. (record_full_resume, record_full_core_resume): Adjust. * remote.c (struct remote_state) <async_client_callback, async_client_context>: Delete fields. (remote_start_remote, extended_remote_attach_1, remote_resume) (extended_remote_create_inferior): Adjust. (remote_async_serial_handler): Call inferior_event_handler directly. (remote_async): Replace 'callback' and 'context' parameters with boolean 'enable' parameter. Adjust. * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust. * target-delegates.c: Regenerate.
2015-03-24Debug output tweaks in the Linux target backendsPedro Alves1-21/+28
This adds/tweaks a few debug logs I found useful recently. gdb/gdbserver/ChangeLog: 2015-03-24 Pedro Alves <palves@redhat.com> * linux-low.c (check_stopped_by_breakpoint): Tweak debug log output. Also dump TRAP_TRACE. (linux_low_filter_event): In debug output, distinguish a resume_stop SIGSTOP from a delayed SIGSTOP. gdb/ChangeLog: 2015-03-24 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_nat_resume): Output debug logs before trying to resume the event lwp. Use the lwp's ptid instead of the passed in (maybe wildcard) ptid. (stop_wait_callback): Tweak debug log output. (check_stopped_by_breakpoint): Tweak debug log output. Also dump TRAP_TRACE. (linux_nat_filter_event): In debug output, distinguish a resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs before trying to resume the lwp.
2015-03-24Make lwp_info.arch_private handling sharedGary Benson1-0/+17
This commit moves the code to handle lwp_info.arch_private for Linux x86 into a new shared file, nat/x86-linux.c. gdb/ChangeLog: * nat/x86-linux.h: New file. * nat/x86-linux.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h. (x86-linux.o): New rule. * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o. * config/i386/linux64.mh (NATDEPFILES): Likewise. * nat/linux-nat.h (struct arch_lwp_info): New forward declaration. (lwp_set_arch_private_info): New declaration. (lwp_arch_private_info): Likewise. * linux-nat.c (lwp_set_arch_private_info): New function. (lwp_arch_private_info): Likewise. * x86-linux-nat.c: Include nat/x86-linux.h. (arch_lwp_info): Removed structure. (update_debug_registers_callback): Use lwp_set_debug_registers_changed. (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed and lwp_set_debug_registers_changed. (x86_linux_new_thread): Use lwp_set_debug_registers_changed. gdb/gdbserver/ChangeLog: * Makefile.in (x86-linux.o): New rule. * configure.srv: Add x86-linux.o to relevant targets. * linux-low.c (lwp_set_arch_private_info): New function. (lwp_arch_private_info): Likewise. * linux-x86-low.c: Include nat/x86-linux.h. (arch_lwp_info): Removed structure. (update_debug_registers_callback): Use lwp_set_debug_registers_changed. (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed and lwp_set_debug_registers_changed. (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2015-03-24Introduce basic LWP accessorsGary Benson1-0/+27
This commit introduces three accessors that shared Linux code can use to access fields of struct lwp_info. The GDB and gdbserver Linux x86 code is modified to use them. gdb/ChangeLog: * nat/linux-nat.h (ptid_of_lwp): New declaration. (lwp_is_stopped): Likewise. (lwp_stop_reason): Likewise. * linux-nat.c (ptid_of_lwp): New function. (lwp_is_stopped): Likewise. (lwp_is_stopped_by_watchpoint): Likewise. * x86-linux-nat.c (update_debug_registers_callback): Use lwp_is_stopped. (x86_linux_prepare_to_resume): Use ptid_of_lwp and lwp_stop_reason. gdb/gdbserver/ChangeLog: * linux-low.c (ptid_of_lwp): New function. (lwp_is_stopped): Likewise. (lwp_stop_reason): Likewise. * linux-x86-low.c (update_debug_registers_callback): Use lwp_is_stopped. (x86_linux_prepare_to_resume): Use ptid_of_lwp and lwp_stop_reason.
2015-03-24Add iterate_over_lwps to gdbserverGary Benson1-6/+3
This commit introduces a new function, iterate_over_lwps, that shared Linux code can use to call a function for each LWP that matches certain criteria. This function already existed in GDB and was in use by GDB's various low-level Linux x86 debug register setters. An equivalent was written for gdbserver and gdbserver's low-level Linux x86 debug register setters were modified to use it. gdb/ChangeLog: * linux-nat.h: Include nat/linux-nat.h. (iterate_over_lwps): Move declaration to nat/linux-nat.h. * nat/linux-nat.h (struct lwp_info): New forward declaration. (iterate_over_lwps_ftype): New typedef. (iterate_over_lwps): New declaration. * linux-nat.h (iterate_over_lwps): Update comment. Use iterate_over_lwps_ftype. Update callback return value check. gdb/gdbserver/ChangeLog: * linux-low.h: Include nat/linux-nat.h. * linux-low.c (iterate_over_lwps_args): New structure. (iterate_over_lwps_filter): New function. (iterate_over_lwps): Likewise. * linux-x86-low.c (update_debug_registers_callback): Update signature to what iterate_over_lwps expects. Remove PID check that iterate_over_lwps now performs. (x86_dr_low_set_addr): Use iterate_over_lwps. (x86_dr_low_set_control): Likewise.
2015-03-24Introduce current_lwp_ptidGary Benson1-0/+9
This commit introduces a new function, current_lwp_ptid, that shared Linux code can use to obtain the ptid of the current lightweight process. gdb/ChangeLog: * nat/linux-nat.h (current_lwp_ptid): New declaration. * linux-nat.c (current_lwp_ptid): New function. * x86-linux-nat.c: Include nat/linux-nat.h. (x86_linux_dr_get_addr): Use current_lwp_ptid. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_set_addr): Likewise. gdb/gdbserver/ChangeLog: * linux-low.c (current_lwp_ptid): New function. * linux-x86-low.c: Include nat/linux-nat.h. (x86_dr_low_get_addr): Use current_lwp_ptid. (x86_dr_low_get_control): Likewise. (x86_dr_low_get_status): Likewise.
2015-03-19Fix race exposed by gdb.threads/killed.expPedro Alves1-16/+89
On GNU/Linux, this test sometimes FAILs like this: (gdb) run Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/killed [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". ptrace: No such process. (gdb) Program terminated with signal SIGKILL, Killed. The program no longer exists. FAIL: gdb.threads/killed.exp: run program to completion (timeout) Note the suspicious "No such process" line (that's errno==ESRCH). Adding debug output we see: linux_nat_wait: [process -1], [TARGET_WNOHANG] LLW: enter LNW: waitpid(-1, ...) returned 18465, ERRNO-OK LLW: waitpid 18465 received Stopped (signal) (stopped) LNW: waitpid(-1, ...) returned 18461, ERRNO-OK LLW: waitpid 18461 received Trace/breakpoint trap (stopped) LLW: Handling extended status 0x03057f LHEW: Got clone event from LWP 18461, new child is LWP 18465 LNW: waitpid(-1, ...) returned 0, ERRNO-OK RSRL: resuming stopped-resumed LWP LWP 18465 at 0x3b36af4b51: step=0 RSRL: resuming stopped-resumed LWP LWP 18461 at 0x3b36af4b51: step=0 sigchld ptrace: No such process. (gdb) linux_nat_wait: [process -1], [TARGET_WNOHANG] LLW: enter LNW: waitpid(-1, ...) returned 18465, ERRNO-OK LLW: waitpid 18465 received Killed (terminated) LLW: LWP 18465 exited. LNW: waitpid(-1, ...) returned 18461, No child processes LLW: waitpid 18461 received Killed (terminated) Process 18461 exited LNW: waitpid(-1, ...) returned -1, No child processes LLW: exit sigchld infrun: target_wait (-1, status) = infrun: 18461 [process 18461], infrun: status->kind = signalled, signal = GDB_SIGNAL_KILL infrun: TARGET_WAITKIND_SIGNALLED Program terminated with signal SIGKILL, Killed. The program no longer exists. infrun: stop_waiting FAIL: gdb.threads/killed.exp: run program to completion (timeout) The issue is that here: RSRL: resuming stopped-resumed LWP LWP 18465 at 0x3b36af4b51: step=0 RSRL: resuming stopped-resumed LWP LWP 18461 at 0x3b36af4b51: step=0 The first line shows we had just resumed LWP 18465, which does: void * child_func (void *dummy) { kill (pid, SIGKILL); exit (1); } So if the kernel manages to schedule that thread fast enough, the process may be killed before GDB has a chance to resume LWP 18461. GDBserver has code at the tail end of linux_resume_one_lwp to cope with this: ~~~ ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, lwpid_of (thread), (PTRACE_TYPE_ARG3) 0, /* Coerce to a uintptr_t first to avoid potential gcc warning of coercing an 8 byte integer to a 4 byte pointer. */ (PTRACE_TYPE_ARG4) (uintptr_t) signal); current_thread = saved_thread; if (errno) { /* ESRCH from ptrace either means that the thread was already running (an error) or that it is gone (a race condition). If it's gone, we will get a notification the next time we wait, so we can ignore the error. We could differentiate these two, but it's tricky without waiting; the thread still exists as a zombie, so sending it signal 0 would succeed. So just ignore ESRCH. */ if (errno == ESRCH) return; perror_with_name ("ptrace"); } ~~~ However, that's not a complete fix, because between starting to handle the resume request and getting that PTRACE_CONTINUE, we run other ptrace calls that can also fail with ESRCH, and that end up throwing an error (with perror_with_name). In the case above, I indeed sometimes see resume_stopped_resumed_lwps fail in the registers read: resume_stopped_resumed_lwps (struct lwp_info *lp, void *data) { ... CORE_ADDR pc = regcache_read_pc (regcache); Or e.g., in 32-bit mode, i386_linux_resume has several calls that can throw too. Whether to ignore ptrace errors or not depends on context that is only available somewhere up the call chain. So the fix is to let ptrace errors throw as they do today, and wrap the resume request in a TRY/CATCH that swallows it iff the lwp that we were trying to resume is no longer ptrace-stopped. gdb/gdbserver/ChangeLog: 2015-03-19 Pedro Alves <palves@redhat.com> * linux-low.c (linux_resume_one_lwp): Rename to ... (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here, instead call perror_with_name. (check_ptrace_stopped_lwp_gone): New function. (linux_resume_one_lwp): Reimplement as wrapper around linux_resume_one_lwp_throw that swallows errors if the LWP is gone. gdb/ChangeLog: 2015-03-19 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_resume_one_lwp): Rename to ... (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here, instead call perror_with_name. (check_ptrace_stopped_lwp_gone): New function. (linux_resume_one_lwp): Reimplement as wrapper around linux_resume_one_lwp_throw that swallows errors if the LWP is gone. (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and swallows errors if the LWP is gone. Use linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
2015-03-19gdbserver/Linux: unbreak thread event randomizationPedro Alves1-0/+1
Wanting to make sure the new continue-pending-status.exp test tests both cases of threads 2 and 3 reporting an event, I added counters to the test, to make it FAIL if events for both threads aren't seen. Assuming a well behaved backend, and given a reasonable number of iterations, it should PASS. However, running that against GNU/Linux gdbserver, I found that surprisingly, that FAILed. GDBserver always reported the breakpoint hit for the same thread. Turns out that I broke gdbserver's thread event randomization recently, with git commit 582511be ([gdbserver] linux-low.c: better starvation avoidance, handle non-stop mode too). In that commit I missed that the thread structure also has a status_pending_p field... The end result was that count_events_callback always returns 0, and then if no thread is stepping, select_event_lwp always returns the event thread. IOW, no randomization is happening at all. Quite curious how all the other changes in that patch were sufficient to fix non-stop-fair-events.exp anyway even with that broken. Tested on x86_64 Fedora 20, native and gdbserver. gdb/gdbserver/ChangeLog: 2015-03-19 Pedro Alves <palves@redhat.com> * linux-low.c (count_events_callback, select_event_lwp_callback): Use the lwp's status_pending_p field, not the thread's. gdb/testsuite/ChangeLog: 2015-03-19 Pedro Alves <palves@redhat.com> * gdb.threads/continue-pending-status.exp (saw_thread_2) (saw_thread_3): New globals. (top level): Increment them when an event for the corresponding thread is seen. (no thread starvation): New test.
2015-03-19native/Linux: internal error if resume is short-circuitedPedro Alves1-4/+4
If the linux_nat_resume's short-circuits the resume because the current thread has a pending status, and, a thread with a higher number was previously stopped for a breakpoint, GDB internal errors, like: /home/pedro/gdb/mygit/src/gdb/linux-nat.c:2590: internal-error: status_callback: Assertion `lp->status != 0' failed. Fix this by make status_callback bail out earlier. GDBserver is already doing the same. New test added that exercises this. gdb/ChangeLog: 2015-03-19 Pedro Alves <palves@redhat.com> * linux-nat.c (status_callback): Return early if the LWP has no status pending. gdb/testsuite/ChangeLog: 2015-03-19 Pedro Alves <palves@redhat.com> * gdb.threads/continue-pending-status.c: New file. * gdb.threads/continue-pending-status.exp: New file.
2015-03-19select_event_lwp_callback: update commentsPedro Alves1-1/+1
This function (in both GDB and GDBserver) used to consider only SIGTRAP/breakpoint events, but that's no longer the case nowadays. gdb/gdbserver/ChangeLog: 2015-03-19 Pedro Alves <palves@redhat.com> * linux-low.c (select_event_lwp_callback): Update comments to no longer mention SIGTRAP. gdb/ChangeLog: 2015-03-19 Pedro Alves <palves@redhat.com> * linux-nat.c (select_event_lwp_callback): Update comment to no longer mention SIGTRAP.
2015-03-07Split TRY_CATCH into TRY + CATCHPedro Alves1-3/+3
This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.
2015-03-06New common function "startswith"Gary Benson1-4/+4
This commit introduces a new inline common function "startswith" which takes two string arguments and returns nonzero if the first string starts with the second. It also updates the 295 places where this logic was written out longhand to use the new function. gdb/ChangeLog: * common/common-utils.h (startswith): New inline function. All places where this logic was used updated to use the above.
2015-03-04garbage collect target_decr_pc_after_breakPedro Alves1-2/+2
record-btrace was the only target making use of this, and it no longer uses it. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * target.h (struct target_ops) <to_decr_pc_after_break>: Delete. (target_decr_pc_after_break): Delete declaration. * target.c (default_target_decr_pc_after_break) (target_decr_pc_after_break): Delete. * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use gdbarch_decr_pc_after_break instead of target_decr_pc_after_break. * linux-thread-db.c (check_event): Likewise. * infrun.c (adjust_pc_after_break): Likewise. * darwin-nat.c (cancel_breakpoint): Likewise. * aix-thread.c (aix_thread_wait): Likewise. * target-delegates.c: Regenerate.
2015-03-04Linux native: Use TRAP_BRKPT/TRAP_HWBPTPedro Alves1-5/+104
This patch adjusts the native Linux target backend to tell the core whether a trap was caused by a breakpoint. It teaches the target to get that information out of the si_code of the SIGTRAP siginfo. Tested on x86-64 Fedora 20, s390 RHEL 7, and PPC64 Fedora 18. An earlier version was tested on ARM Fedora 21. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * linux-nat.c (save_sigtrap): Check for breakpoints before checking watchpoints. (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a breakpoint is inserted if relying on SIGTRAP's siginfo.si_code. (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether a breakpoint triggered based on the SIGTRAP's siginfo.si_code. (linux_nat_stopped_by_sw_breakpoint) (linux_nat_supports_stopped_by_sw_breakpoint) (linux_nat_stopped_by_hw_breakpoint) (linux_nat_supports_stopped_by_hw_breakpoint): New functions. (linux_nat_wait_1): Don't re-increment the PC if relying on SIGTRAP's siginfo->si_code. (linux_nat_add_target): Install new target methods. * linux-thread-db.c (check_event): Don't account for breakpoint PC offset if the target already adjusted the PC. * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New. (GDB_ARCH_TRAP_BRKPT): New. (TRAP_HWBKPT): Define if not already defined.
2015-03-04enum lwp_stop_reason -> enum target_stop_reasonPedro Alves1-10/+10
We're going to need the same enum as enum lwp_stop_reason in more targets, so this promotes it to common code. gdb/gdbserver/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> enum lwp_stop_reason -> enum target_stop_reason * linux-low.c (check_stopped_by_breakpoint): Adjust. (thread_still_has_status_pending_p, check_stopped_by_watchpoint) (linux_wait_1, stuck_in_jump_pad_callback) (move_out_of_jump_pad_callback, linux_resume_one_lwp) (linux_stopped_by_watchpoint): * linux-low.h (enum lwp_stop_reason): Delete. (struct lwp_info) <stop_reason>: Now an enum target_stop_reason. * linux-x86-low.c (x86_linux_prepare_to_resume): Adjust. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> enum lwp_stop_reason -> enum target_stop_reason * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint) (linux_nat_stopped_by_watchpoint, status_callback) (linux_nat_wait_1): Adjust. * linux-nat.h (enum lwp_stop_reason): Delete. (struct lwp_info) <stop_reason>: Now an enum target_stop_reason. * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust. * target/waitstatus.h (enum target_stop_reason): New.
2015-03-04follow-fork: don't lose the ptids as set by the targetPedro Alves1-8/+7
This Linuxism has made its way into infrun.c, in the follow-fork code: inferior_ptid = ptid_build (child_pid, child_pid, 0); The OS-specific code should fill in the LWPID, TID parts with the appropriate values, if any, and the core code should not be peeking at the components of the ptids. gdb/ 2015-03-04 Pedro Alves <palves@redhat.com> * infrun.c (follow_fork_inferior): Use the whole of the inferior_ptid and pending_follow.related_pid ptids instead of building ptids from the process components. Adjust verbose output to use target_pid_to_str. * linux-nat.c (linux_child_follow_fork): Use the whole of the inferior_ptid and pending_follow.related_pid ptids instead of building ptids from the process components.
2015-03-03Linux/ptrace: don't convert ptids when asking inf-ptrace layer to resume LWPPedro Alves1-5/+1
Ref: https://sourceware.org/ml/gdb-patches/2015-03/msg00060.html The record-btrace target can hit an assertion here: Breakpoint 1, record_btrace_fetch_registers (ops=0x974bfc0 <record_btrace_ops>, regcache=0x9a0a798, regno=8) at gdb/record-btrace.c:1202 1202 gdb_assert (tp != NULL); (gdb) p regcache->ptid $3 = {pid = 23856, lwp = 0, tid = 0} The problem is that the linux-nat layer converts the ptid to a single-process ptid before passing the request down to the inf-ptrace layer, which loses information, and then record-btrace can't find the corresponding thread in GDB's thread list: (gdb) bt #0 record_btrace_fetch_registers (ops=0x974bfc0 <record_btrace_ops>, regcache=0x9a0a798, regno=8) at gdb/record-btrace.c:1202 #1 0x083f4ee2 in delegate_fetch_registers (self=0x974bfc0 <record_btrace_ops>, arg1=0x9a0a798, arg2=8) at gdb/target-delegates.c:149 #2 0x08406562 in target_fetch_registers (regcache=0x9a0a798, regno=8) at gdb/target.c:3279 #3 0x08355255 in regcache_raw_read (regcache=0x9a0a798, regnum=8, buf=0xbfffe6c0 "¨\003\222\tÀ8kIøæÿ¿HO5\b\035]") at gdb/regcache.c:643 #4 0x083558a7 in regcache_cooked_read (regcache=0x9a0a798, regnum=8, buf=0xbfffe6c0 "¨\003\222\tÀ8kIøæÿ¿HO5\b\035]") at gdb/regcache.c:734 #5 0x08355de3 in regcache_cooked_read_unsigned (regcache=0x9a0a798, regnum=8, val=0xbfffe738) at gdb/regcache.c:838 #6 0x0827a106 in i386_linux_resume (ops=0x9737ca0 <linux_ops_saved>, ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/i386-linux-nat.c:670 #7 0x08280c12 in linux_resume_one_lwp (lp=0x9a0a5b8, step=1, signo=GDB_SIGNAL_0) at gdb/linux-nat.c:1529 #8 0x08281281 in linux_nat_resume (ops=0x98da608, ptid=..., step=1, signo=GDB_SIGNAL_0) at gdb/linux-nat.c:1708 #9 0x0850738e in record_btrace_resume (ops=0x98da608, ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/record-btrace.c:1760 ... The fix is just to not lose information, and let the intact ptid reach record-btrace.c. Tested on x86-64 Fedora 20, -m32. gdb/ChangeLog: 2015-03-03 Pedro Alves <palves@redhat.com> * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of the lwp field of ptid. Pass the full ptid to get_thread_regcache. * inf-ptrace.c (get_ptrace_pid): New function. (inf_ptrace_resume): Use it. * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified to the lower layer.
2015-02-20GNU/Linux: Stop using libthread_db/td_ta_thr_iterPedro Alves1-26/+39
TL;DR - GDB can hang if something refreshes the thread list out of the target while the target is running. GDB hangs inside td_ta_thr_iter. The fix is to not use that libthread_db function anymore. Long version: Running the testsuite against my all-stop-on-top-of-non-stop series is still exposing latent non-stop bugs. I was originally seeing this with the multi-create.exp test, back when we were still using libthread_db thread event breakpoints. The all-stop-on-top-of-non-stop series forces a thread list refresh each time GDB needs to start stepping over a breakpoint (to pause all threads). That test hits the thread event breakpoint often, resulting in a bunch of step-over operations, thus a bunch of thread list refreshes while some threads in the target are running. The commit adds a real non-stop mode test that triggers the issue, based on multi-create.exp, that does an explicit "info threads" when a breakpoint is hit. IOW, it does the same things the as-ns series was doing when testing multi-create.exp. The bug is a race, so it unfortunately takes several runs for the test to trigger it. In fact, even when setting the test running in a loop, it sometimes takes several minutes for it to trigger for me. The race is related to libthread_db's td_ta_thr_iter. This is libthread_db's entry point for walking the thread list of the inferior. Sometimes, when GDB refreshes the thread list from the target, libthread_db's td_ta_thr_iter can somehow see glibc's thread list as a cycle, and get stuck in an infinite loop. The issue is that when a thread exits, its thread control structure in glibc is moved from a "used" list to a "cache" list. These lists are simply circular linked lists where the "next/prev" pointers are embedded in the thread control structure itself. The "next" pointer of the last element of the list points back to the list's sentinel "head". There's only one set of "next/prev" pointers for both lists; thus a thread can only be in one of the lists at a time, not in both simultaneously. So when thread C exits, simplifying, the following happens. A-C are threads. stack_used and stack_cache are the list's heads. Before: stack_used -> A -> B -> C -> (&stack_used) stack_cache -> (&stack_cache) After: stack_used -> A -> B -> (&stack_used) stack_cache -> C -> (&stack_cache) td_ta_thr_iter starts by iterating at the list's head's next, and iterates until it sees a thread whose next pointer points to the list's head again. Thus in the before case above, C's next points to stack_used, indicating end of list. In the same case, the stack_cache list is empty. For each thread being iterated, td_ta_thr_iter reads the whole thread object out of the inferior. This includes the thread's "next" pointer. In the scenario above, it may happen that td_ta_thr_iter is iterating thread B and has already read B's thread structure just before thread C exits and its control structure moves to the cached list. Now, recall that td_ta_thr_iter is running in the context of GDB, and there's no locking between GDB and the inferior. From it's local copy of B, td_ta_thr_iter believes that the next thread after B is thread C, so it happilly continues iterating to C, a thread that has already exited, and is now in the stack cache list. After iterating C, td_ta_thr_iter finds the stack_cache head, which because it is not stack_used, td_ta_thr_iter assumes it's just another thread. After this, unless the reverse race triggers, GDB gets stuck in td_ta_thr_iter forever walking the stack_cache list, as no thread in thatlist has a next pointer that points back to stack_used (the terminating condition). Before fully understanding the issue, I tried adding cycle detection to GDB's td_ta_thr_iter callback. However, td_ta_thr_iter skips calling the callback in some cases, which means that it's possible that the callback isn't called at all, making it impossible for GDB to break the loop. I did manage to get GDB stuck in that state more than once. Fortunately, we can avoid the issue altogether. We don't really need td_ta_thr_iter for live debugging nowadays, given PTRACE_EVENT_CLONE. We already know how to map and lwp id to a thread id without iterating (thread_from_lwp), so use that more. gdb/ChangeLog: 2015-02-20 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_handle_extended_wait): Call thread_db_notice_clone whenever a new clone LWP is detected. (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New functions. * linux-nat.h (thread_db_attach_lwp): Delete declaration. (thread_db_notice_clone, linux_stop_and_wait_all_lwps) (linux_unstop_all_lwps): Declare. * linux-thread-db.c (struct thread_get_info_inout): Delete. (thread_get_info_callback): Delete. (thread_from_lwp): Use td_thr_get_info and record_thread. (thread_db_attach_lwp): Delete. (thread_db_notice_clone): New function. (try_thread_db_load_1): If /proc is mounted and shows the process'es task list, walk over all LWPs and call thread_from_lwp instead of relying on td_ta_thr_iter. (attach_thread): Don't call check_thread_signals here. Split the tail part of the function (which adds the thread to the core GDB thread list) to ... (record_thread): ... this function. Call check_thread_signals here. (thread_db_wait): Don't call thread_db_find_new_threads_1. Always call thread_from_lwp. (thread_db_update_thread_list): Rename to ... (thread_db_update_thread_list_org): ... this. (thread_db_update_thread_list): New function. (thread_db_find_thread_from_tid): Delete. (thread_db_get_ada_task_ptid): Simplify. * nat/linux-procfs.c: Include <sys/stat.h>. (linux_proc_task_list_dir_exists): New function. * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare. gdb/gdbserver/ChangeLog: 2015-02-20 Pedro Alves <palves@redhat.com> * thread-db.c: Include "nat/linux-procfs.h". (thread_db_init): Skip listing new threads if the kernel supports PTRACE_EVENT_CLONE and /proc/PID/task/ is accessible. gdb/testsuite/ChangeLog: 2015-02-20 Pedro Alves <palves@redhat.com> * gdb.threads/multi-create-ns-info-thr.exp: New file.
2015-02-20linux-nat.c: fix a few lin_lwp_attach_lwp issuesPedro Alves1-21/+39
This function has a few latent bugs that are triggered by a non-stop mode test that will be added in a subsequent patch. First, as described in the function's intro comment, the function is supposed to return 1 if we're already auto attached to the thread, but haven't processed the PTRACE_EVENT_CLONE event of its parent thread yet. Then, we may find that we're trying to attach to a clone child that hasn't yet stopped for its initial stop, and therefore 'waitpid(..., WNOHANG)' returns 0. In that case, we're currently adding the LWP to the stopped_pids list, which results in linux_handle_extended_wait skipping the waitpid call on the child, and thus confusing things later on when the child eventually reports the stop. Then, the tail end of lin_lwp_attach_lwp always sets the last_resume_kind of the LWP to resume_stop, which is wrong given that the user may be doing "info threads" while some threads are running. And then, the else branch of lin_lwp_attach_lwp always sets the stopped flag of the LWP. This branch is reached if the LWP is the main LWP, which may well be running at this point (to it's wrong to set its 'stopped' flag). AFAICS, there's no reason anymore for special-casing the main/leader LWP here: - For the "attach" case, linux_nat_attach already adds the main LWP to the lwp list, and sets its 'stopped' flag. - For the "run" case, after linux_nat_create_inferior, end up in linux_nat_wait_1 here: /* The first time we get here after starting a new inferior, we may not have added it to the LWP list yet - this is the earliest moment at which we know its PID. */ if (ptid_is_pid (inferior_ptid)) { /* Upgrade the main thread's ptid. */ thread_change_ptid (inferior_ptid, ptid_build (ptid_get_pid (inferior_ptid), ptid_get_pid (inferior_ptid), 0)); lp = add_initial_lwp (inferior_ptid); lp->resumed = 1; } ... which adds the LWP to the LWP list already, before lin_lwp_attach_lwp can ever be reached. gdb/ChangeLog: 2015-02-20 Pedro Alves <palves@redhat.com> * linux-nat.c (lin_lwp_attach_lwp): No longer special case the main LWP. Handle the case of waitpid returning 0 if we're already attached to the LWP. Don't set the LWP's last_resume_kind to resume_stop if we already knew about the LWP. (linux_nat_filter_event): Add debug logs.
2015-02-19Fix non executable stack handling when calling functions in the inferior.Antoine Tremblay1-2/+4
When gdb creates a dummy frame to execute a function in the inferior, the process may generate a SIGSEGV, SIGTRAP or SIGILL because the stack is non executable. If the signal handler set in gdb has option print or stop enabled for these signals gdb handles this correctly. However, in the case of noprint and nostop the signal is short-circuited and the inferior process is sent the signal directly. This causes the inferior to crash because of gdb. This patch adds a check for SIGSEGV, SIGTRAP or SIGILL so that these signals are sent to gdb rather than short-circuited in the inferior. gdb then handles them properly and the inferior process does not crash. This patch also fixes the same behavior in gdbserver. Also added a small testcase to test the issue called catch-gdb-caused-signals. This applies to Linux only, tested on Linux. gdb/ChangeLog: PR breakpoints/16812 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV. * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add. * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint. gdb/gdbserver/ChangeLog: PR breakpoints/16812 * linux-low.c (wstatus_maybe_breakpoint): Remove. (linux_low_filter_event): Update wstatus_maybe_breakpoint name. (linux_wait_1): Report SIGTRAP,SIGILL,SIGSEGV. gdb/testsuite/ChangeLog: PR breakpoints/16812 * gdb.base/catch-gdb-caused-signals.c: New file. * gdb.base/catch-gdb-caused-signals.exp: New file.
2015-02-04Linux: don't resume new LWPs until we've pulled all events out of the kernelPedro Alves1-30/+12
Since the starvation avoidance series (https://sourceware.org/ml/gdb-patches/2014-12/msg00631.html), both GDB and GDBserver pull all events out of ptrace before deciding which event to process. There's one problem with that though. Because we resume new threads immediately when we see a PTRACE_EVENT_CLONE event, if the program constantly spawns threads fast enough, new threads can spawn threads faster we can pull events out of the kernel, and thus we'd get stuck in an infinite loop, never returning any event to the core to process. I occasionally see this happen with the attach-many-short-lived-threads.exp test against gdbserver. The fix is to delay resuming new threads until we've pulled out all events out of the kernel. On native, we already have the resume_stopped_resumed_lwps function that knows to resume LWPs that are stopped with no event to report to the core. So the patch just adds another use. GDBserver didn't have the equivalent yet, so the patch adds one. Tested on x86_64 Fedora 20, native and gdbserver (remote and extended-remote). gdb/gdbserver/ChangeLog: 2015-02-04 Pedro Alves <palves@redhat.com> * linux-low.c (handle_extended_wait): Don't resume LWPs here. (resume_stopped_resumed_lwps): New function. (linux_wait_for_event_filtered): Use it. gdb/ChangeLog: 2015-02-04 Pedro Alves <palves@redhat.com> * linux-nat.c (handle_extended_wait): Don't resume LWPs here. (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait returns true. (resume_stopped_resumed_lwps): Don't check whether the thread is marked as executing. (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
2015-02-03Fix up some target is-async vs can-async confusionsPedro Alves1-10/+6
In all these cases we're interested in whether the target is currently async, with its event sources installed in the event loop, not whether it can async if needed. Also, I'm not seeing the point of the target_async call from within linux_nat_wait. That's normally done on resume instead, which this target already does. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2015-02-03 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use target_is_async_p instead of target_can_async. (linux_nat_wait): Use target_is_async_p instead of target_can_async. Don't enable async here. * remote.c (interrupt_query, remote_wait, putpkt_binary): Use target_is_async_p instead of target_can_async.
2015-01-23Linux: make target_is_async_p return false when async is offPedro Alves1-13/+10
linux_nat_is_async_p currently always returns true, even when the target is _not_ async. That confuses gdb_readline_wrapper/gdb_readline_wrapper_cleanup, which force-disables target-async while the secondary prompt is active. As a result, when gdb_readline_wrapper returns, the target is left async, even through it was sync to begin with. That can result in weird bugs, like the one the test added by this commit exposes. Ref: https://sourceware.org/ml/gdb-patches/2015-01/msg00592.html gdb/ChangeLog: 2015-01-23 Pedro Alves <palves@redhat.com> * linux-nat.c (linux_is_async_p): New macro. (linux_nat_is_async_p): (linux_nat_terminal_inferior): Check whether the target can async instead of whether it is already async. (linux_nat_terminal_ours): Don't check whether the target is async. (linux_async_pipe): Use linux_is_async_p. gdb/testsuite/ChangeLog: 2015-01-23 Pedro Alves <palves@redhat.com> * gdb.threads/continue-pending-after-query.c: New file. * gdb.threads/continue-pending-after-query.exp: New file.
2015-01-15Move code to disable ASR to nat/Sergio Durigan Junior1-37/+4
This patch moves the shared code present on gdb/linux-nat.c:linux_nat_create_inferior and gdb/gdbserver/linux-low.c:linux_create_inferior to nat/linux-personality.c. This code is responsible for disabling address space randomization based on user setting, and using <sys/personality.h> to do that. I decided to put the prototype of the maybe_disable_address_space_randomization on nat/linux-osdata.h because it seemed the best place to put it. I regression-tested this patch on Fedora 20 x86_64, and found no regressions. gdb/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h. (linux-personality.o): New rule. * common/common-defs.h: Include <stdint.h>. * config/aarch64/linux.mh (NATDEPFILES): Include linux-personality.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise. * config/powerpc/linux.mh (NATDEPFILES): Likewise. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/s390/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. * defs.h: Remove #include <stdint.h> (moved to common/common-defs.h). * linux-nat.c: Include nat/linux-personality.h. Remove #include <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to nat/linux-personality.c). (linux_nat_create_inferior): Remove code to disable address space randomization (moved to nat/linux-personality.c). Create cleanup to disable address space randomization. * nat/linux-personality.c: New file. * nat/linux-personality.h: Likewise. gdb/gdbserver/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add linux-personality.c. (linux-personality.o): New rule. * configure.srv (srv_linux_obj): Add linux-personality.o to the list of objects to be built. * linux-low.c: Include nat/linux-personality.h. (linux_create_inferior): Remove code to disable address space randomization (moved to ../nat/linux-personality.c). Create cleanup to disable address space randomization.
2015-01-13[ARI] Remove trailing new-line in argument of call to warning.Joel Brobecker1-1/+1
gdb/ChangeLog: * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing new-line in argument of call to "warning".
2015-01-09linux-nat.c: better starvation avoidance, handle non-stop mode tooPedro Alves1-298/+294
Running the testsuite with a series that reimplements user-visible all-stop behavior on top of a target running in non-stop mode revealed problems related to event starvation avoidance. For example, I see gdb.threads/signal-while-stepping-over-bp-other-thread.exp failing. What happens is that GDB core never gets to see the signal event. It ends up processing the events for the same threads over an over, because Linux's waitpid(-1, ...) returns that first task in the task list that has an event, starving threads on the tail of the task list. So I wrote a non-stop mode test originally inspired by signal-while-stepping-over-bp-other-thread.exp, to stress this independently of all-stop on top of non-stop. Fixing it required the changes described below. The test will be added in a following commit. 1) linux-nat.c has code in place that picks an event LWP at random out of all that have had events. This is because on the kernel side, "waitpid(-1, ...)" just walks the task list linearly looking for the first that had an event. But, this code is currently only used in all-stop mode. So with a multi-threaded program that has multiple events triggering debug events in parallel, GDB ends up starving some threads. To make the event randomization work in non-stop mode too, the patch makes us pull out all the already pending events on the kernel side, with waitpid, before deciding which LWP to report to the core. There's some code in linux_wait that takes care of leaving events pending if they were for LWPs the caller is not interested in. The patch moves that to linux_nat_filter_event, so that we only have one place that leaves events pending. With that in place, conceptually, the flow is simpler and more normalized: #1 - walk the LWP list looking for an LWP with a pending event to report. #2 - if no pending event, pull events out of the kernel, and store them in the LWP structures as pending. #3- goto #1. 2) Then, currently the event randomization code only considers SIGTRAP (or trap-like) events. That means that if e.g., have have multiple threads stepping in parallel that hit a breakpoint that needs stepping over, and one gets a signal, the signal may end up never getting processed, because GDB will always be giving priority to the SIGTRAPs. The patch fixes this by making the randomization code consider all kinds of pending events. 3) If multiple threads hit a breakpoint, we report one of those, and "cancel" the others. Cancelling means decrementing the PC, and discarding the event. If the next time the LWP is resumed the breakpoint is still installed, the LWP should hit it again, and we'll report the hit then. The problem I found is that this delays threads from advancing too much, with the kernel potentially ending up scheduling the same threads over and over, and others not advancing. So the patch switches away from cancelling the breakpoints, and instead remembering that the LWP had stopped for a breakpoint. If on resume the breakpoint is still installed, we report it. If it's no longer installed, we discard the pending event then. This is actually how GDBserver used to handle this before d50171e4 (Teach linux gdbserver to step-over-breakpoints), but with the difference that back then we'd delay adjusting the PC until resuming, which made it so that "info threads" could wrongly see threads with unadjusted PCs. gdb/ 2015-01-09 Pedro Alves <palves@redhat.com> * breakpoint.c (hardware_breakpoint_inserted_here_p): New function. * breakpoint.h (hardware_breakpoint_inserted_here_p): New declaration. * linux-nat.c (linux_nat_status_is_event): Move higher up in file. (linux_resume_one_lwp): Store the thread's PC. Adjust to clear stop_reason. (check_stopped_by_watchpoint): New function. (save_sigtrap): Reimplement. (linux_nat_stopped_by_watchpoint): Adjust. (linux_nat_lp_status_is_event): Delete. (stop_wait_callback): Only call save_sigtrap after storing the pending status. (status_callback): If the thread had been stopped for a breakpoint that has since been removed, discard the event and resume the LWP. (count_events_callback, select_event_lwp_callback): Use lwp_status_pending_p instead of linux_nat_lp_status_is_event. (cancel_breakpoint): Rename to ... (check_stopped_by_breakpoint): ... this. Record whether the LWP stopped for a software breakpoint or hardware breakpoint. (select_event_lwp): Only give preference to the stepping LWP in all-stop mode. Adjust comments. (stop_and_resume_callback): Remove references to new_pending_p. (linux_nat_filter_event): Likewise. Leave exit events of the leader thread pending here. Handle signal short circuiting here. Only call save_sigtrap after storing the pending waitstatus. (linux_nat_wait_1): Remove 'retry' label. Remove references to new_pending. Don't handle leaving events the caller is not interested in pending here, nor handle signal short-circuiting here. Also give equal priority to all LWPs that have had events in non-stop mode. If reporting a software breakpoint event, unadjust the LWP's PC. * linux-nat.h (enum lwp_stop_reason): New. (struct lwp_info) <stop_pc>: New field. (struct lwp_info) <stopped_by_watchpoint>: Delete field. (struct lwp_info) <stop_reason>: New field. * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.