| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-17 Tom de Vries <tdevries@suse.de>
* arm-nbsd-nat.c: Fix typos in comments.
* arm-tdep.c: Same.
* darwin-nat-info.c: Same.
* dwarf2read.c: Same.
* elfread.c: Same.
* event-top.c: Same.
* findvar.c: Same.
* gdbtypes.c: Same.
* hppa-tdep.c: Same.
* i386-tdep.c: Same.
* jit.c: Same.
* main.c: Same.
* mdebugread.c: Same.
* moxie-tdep.c: Same.
* nto-procfs.c: Same.
* osabi.c: Same.
* ppc-linux-tdep.c: Same.
* remote.c: Same.
* riscv-tdep.c: Same.
* s390-tdep.c: Same.
* sh-tdep.c: Same.
* sparc-linux-tdep.c: Same.
* sparc-nat.c: Same.
* stack.c: Same.
* target-descriptions.c: Same.
* top.c: Same.
* varobj.c: Same.
Change-Id: I6047967abd2d51c9000dea15184d19f4e952c3ff
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
This simplifies memory management. I've also changed some global variables
to std::string accordingly (which store the result of these functions),
but not all because some are used with add_setshow_optional_filename_cmd
which requires a char*.
gdb/ChangeLog:
2019-09-11 Christian Biesinger <cbiesinger@google.com>
* auto-load.c (auto_load_expand_dir_vars): Update.
* defs.h (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(relocate_gdb_directory): Change return type to std::string.
* guile/guile.c (gdbscm_data_directory): Update.
(initialize_scheme_side): Update.
* jit.c (jit_reader_dir): Change to std::string.
(jit_reader_load_command): Update.
* main.c (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(set_gdb_data_directory): Update.
(relocate_path): Change to return std::string.
(relocate_gdb_directory): Change to return std::string.
(relocate_gdbinit_path_maybe_in_datadir): Update.
(captured_main_1): Update.
* python/python.c (do_start_initialization): Update.
* top.c (show_gdb_datadir): Update.
* xml-syscall.c (xml_init_syscalls_info): Update.
(init_syscalls_info): Update.
|
|
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet
supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/',
which makes it available also on gdbserver.
gdb/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.ac: Don't check for 'dlfcn.h' (moved to
gdbsupport/common.m4).
* Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to
'gdbsupport/'.
(HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'.
* compile/compile-c-support.c: Include
'gdbsupport/gdb-dlfcn.h'.
* gdbsupport/common.m4: Check for 'dlfcn.h'.
* gdb-dlfcn.c: Move to...
* gdbsupport/gdb-dlfcn.c: ... here.
* gdb-dlfcn.h: Move to...
* gdbsupport/gdb-dlfcn.h: ... here.
gdb/gdbserver/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'.
(OBS): Add 'gdbsupport/gdb-dlfcn.o'.
* config.in: Regenerate.
* configure: Regenerate.
|
|
This changes gdb to use obstack_strdup when appropriate, rather than
the wordier obstack_copy0.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* xcoffread.c (SYMNAME_ALLOC, process_xcoff_symbol): Use
obstack_strdup.
* typeprint.c (typedef_hash_table::find_global_typedef): Use
obstack_strdup.
* symfile.c (allocate_compunit_symtab): Use obstack_strdup.
* stabsread.c (common_block_start): Use obstack_strdup.
* objfiles.c (set_objfile_main_name, objfile): Use
obstack_strdup.
* namespace.c (add_using_directive): Use obstack_strdup.
* mdebugread.c (parse_symbol, parse_type): Use obstack_strdup.
* jit.c (finalize_symtab): Use obstack_strdup.
* dwarf2read.c (fixup_go_packaging, dwarf2_physname)
(guess_partial_die_structure_name, partial_die_info::fixup)
(dwarf2_name): Use obstack_strdup.
* coffread.c (coff_read_struct_type, coff_read_enum_type): Use
obstack_strdup.
* c-exp.y (scan_macro_expansion): Use obstack_strdup.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
obstack_strdup.
* ada-lang.c (ada_decode_symbol): Use obstack_strdup.
|
|
This changes jit.c to use the type-safe registry. Only one of the
registry keys in jit.c is converted; the other is trickier and so I've
left it be for now.
gdb/ChangeLog
2019-07-10 Tom Tromey <tromey@adacore.com>
* jit.c (jit_program_space_key): Change type. Move lower.
(get_jit_program_space_data): Update.
(jit_program_space_data_cleanup): Remove.
(jit_breakpoint_deleted, free_objfile_data, _initialize_jit):
Update.
(struct jit_program_space_data): Add initializers.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
|
I was curious what used the terminating "null" minimal symbol; and
after looking I could not find anything. This patch removes
terminate_minimal_symbol_table and the extra minimal symbol that is
allocated for it.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Update.
* objfiles.c (objfile::objfile): Update.
* minsyms.h (terminate_minimal_symbol_table): Don't declare.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Update
comment.
(minimal_symbol_reader::install): Update.
(terminate_minimal_symbol_table): Remove.
* jit.c (jit_object_close_impl): Update.
|
|
This changes the all_objfiles_safe range adapter to be a method on the
program space, and fixes up all the users.
gdb/ChangeLog
2019-01-15 Tom Tromey <tom@tromey.com>
* progspace.h (program_space) <objfiles_safe_range>: New
typedef.
<objfiles_safe>: New method.
* objfiles.h (class all_objfiles_safe): Remove.
* objfiles.c (free_all_objfiles, objfile_purge_solibs): Update.
* jit.c (jit_inferior_exit_hook): Update.
|
|
This changes the all_objfiles range adapter to be a method on the
program space, and fixes up all the users.
gdb/ChangeLog
2019-01-17 Tom Tromey <tom@tromey.com>
* progspace.h (program_space) <objfiles_range>: New typedef.
<objfiles>: New method.
<objfiles_head>: Rename from objfiles.
(object_files): Update.
* guile/scm-progspace.c (gdbscm_progspace_objfiles): Update.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Update.
* guile/scm-objfile.c (gdbscm_objfiles): Update.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers):
Update.
* python/py-progspace.c (pspy_get_objfiles): Update.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Update.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Update.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Update.
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_objfile_from_block)
(lookup_static_symbol, basic_lookup_transparent_type)
(find_pc_sect_compunit_symtab, find_symbol_at_address)
(find_line_symtab, info_sources_command)
(default_collect_symbol_completion_matches_break_on)
(make_source_files_completion_list, find_main_name): Update.
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics, maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_print_objfiles)
(maintenance_info_symtabs, maintenance_check_symtabs)
(maintenance_expand_symtabs, maintenance_info_line_tables):
Update.
* symfile.c (remove_symbol_file_command, overlay_invalidate_all)
(find_pc_overlay, find_pc_mapped_section, list_overlays_command)
(map_overlay_command, unmap_overlay_command)
(simple_overlay_update, expand_symtabs_matching)
(map_symbol_filenames): Update.
* symfile-debug.c (set_debug_symfile): Update.
* spu-tdep.c (spu_overlay_update, spu_objfile_from_frame):
Update.
* source.c (select_source_symtab, forget_cached_source_info):
Update.
* solib.c (solib_read_symbols): Update.
* solib-spu.c (append_ocl_sos): Update.
* psymtab.c (maintenance_print_psymbols)
(maintenance_info_psymtabs, maintenance_check_psymtabs): Update.
* probe.c (parse_probes_in_pspace, find_probe_by_pc): Update.
* printcmd.c (info_symbol_command): Update.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created):
Update.
* objfiles.h (class all_objfiles): Remove.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp, update_section_map)
(shared_objfile_contains_address_p)
(default_iterate_over_objfiles_in_search_order): Update.
* objc-lang.c (info_selectors_command, info_classes_command)
(find_methods): Update.
* minsyms.c (find_solib_trampoline_target): Update.
* maint.c (maintenance_info_sections)
(maintenance_translate_address, count_symtabs_and_blocks):
Update.
* main.c (captured_main_1): Update.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Update.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Update.
* jit.c (jit_find_objf_with_entry_addr): Update.
* hppa-tdep.c (find_unwind_entry)
(hppa_lookup_stub_minimal_symbol): Update.
* gcore.c (gcore_create_callback, objfile_find_memory_regions):
Update.
* elfread.c (elf_gnu_ifunc_resolve_by_cache)
(elf_gnu_ifunc_resolve_by_got): Update.
* dwarf2-frame.c (dwarf2_frame_find_fde): Update.
* dwarf-index-write.c (save_gdb_index_command): Update.
* cp-support.c (add_symbol_overload_list_qualified): Update.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Update.
* blockframe.c (find_pc_partial_function): Update.
* ada-lang.c (ada_lookup_simple_minsym, add_nonlocal_symbols)
(ada_collect_symbol_completion_matches)
(ada_add_global_exceptions): Update.
|
|
This patch builds on the previous by enabling the `new' multidictionary
API. A lot of the hunks are simply textual replacements of "dict_"
with "mdict_" and similar transformations.
A word of warning, even with the use of multidictionaries, the code
still does not satisfactorily fix the reported problems with gdb/23712
(or gdb/23010). We still have additional changes to make before that
happens.
gdb/ChangeLog:
PR gdb/23712
PR symtab/23010
* dictionary.h (struct dictionary): Replace declaration with
multidictionary.
(dict_create_hashed, dict_create_hashed_expandable)
(dict_create_linear, dict_create_linear_expandable)
(dict_free, dict_add_symbol, dict_add_pending, dict_empty)
(dict_iterator_first, dict_iterator_next, dict_iter_match_first)
(dict_iter_match_next, dict_size): Rename to "mdict_" versions
taking multidictionary argument.
[ALL_DICT_SYMBOLS]: Update for multidictionary.
* block.h (struct block) <dict>: Change to multidictionary
and rename `multidict'.
* block.c, buildsym.c, jit.c, mdebugread.c, objfiles.c,
symmisc.c: Update all dictionary references to multidictionary.
|
|
This removes the ALL_OBJFILES_SAFE macro, replacing the uses with
ranged for loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* common/next-iterator.h (next_adapter): Add Iterator template
parameter.
* objfiles.h (ALL_OBJFILES_SAFE): Remove.
(class all_objfiles_safe): New.
* jit.c (jit_inferior_exit_hook): Use all_objfiles_safe.
* objfiles.c (put_objfile_before): Update comment.
(add_separate_debug_objfile): Likewise.
(free_all_objfiles): Use all_objfiles_safe.
(objfile_purge_solibs): Likewise.
|
|
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
A user at Mozilla pointed out a crash in jit.c. In his situation, an
inferior using the JIT API exec'd an executable that did not use it.
This caused an assertion failure when jit.c:free_objfile_data called
delete_breakpoint with NULL.
This patch fixes the problem in the obvious way. New test case
included.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* jit.c (free_objfile_data): Only delete breakpoint if non-null.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
Simon Marchi <simark@simark.ca>
* gdb.base/jit-exec.exp: New file.
* gdb.base/jit-exec.c: New file.
* gdb.base/jit-execd.c: New file.
|
|
Function lookup_minimal_symbol_and_objfile iterates on all objfiles and
calls lookup_minimal_symbol for each of them, effectively searching in all
objfiles. lookup_bound_minimal_symbol calls lookup_minimal_symbol with NULL,
which also effectively searches all objfiles. AFAIK, they do exactly the same
thing, so we can get rid of one (and lookup_minimal_symbol_and_objfile happens
to be the most inefficient because it ends up n^2 on the number of objfiles).
Tested in both aarch64-linux-gnu and amd64-linux-gnu. No regressions.
|
|
This removes the long_long_align_bit gdbarch attribute in favor of
type_align. This uncovered two possible issues.
First, arc-tdep.c claimed that long long alignment was 32 bits, but as
discussed on the list, ARC has a maximum alignment of 32 bits, so I've
added an arc_type_align function to account for this.
Second, jit.c, the sole user of long_long_align_bit, was confusing
"long long" with uint64_t. The relevant structure is defined in the
JIT API part of the manual as:
struct jit_code_entry
{
struct jit_code_entry *next_entry;
struct jit_code_entry *prev_entry;
const char *symfile_addr;
uint64_t symfile_size;
};
I've changed this code to use uint64_t.
2018-04-30 Tom Tromey <tom@tromey.com>
* jit.c (jit_read_code_entry): Use type_align.
* i386-tdep.c (i386_gdbarch_init): Don't call
set_gdbarch_long_long_align_bit.
* gdbarch.sh: Remove long_long_align_bit.
* gdbarch.c, gdbarch.h: Rebuild.
* arc-tdep.c (arc_type_align): New function.
(arc_gdbarch_init): Use arc_type_align. Don't call
set_gdbarch_long_long_align_bit.
|
|
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
|
|
This removes make_cleanup_free_section_addr_info. Instead -- per
Simon's suggestion -- this changes section_addr_info to be a
std::vector.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-16 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_symfile_offsets): Change type of "addrs".
* utils.h (make_cleanup_free_section_addr_info): Don't declare.
* utils.c (do_free_section_addr_info)
(make_cleanup_free_section_addr_info): Remove.
* symfile.h (struct other_sections): Add constructor.
(struct section_addr_info): Remove.
(section_addr_info): New typedef.
(struct sym_fns) <sym_offsets>: Change type of parameter.
(build_section_addr_info_from_objfile)
(relative_addr_info_to_section_offsets, addr_info_make_relative)
(default_symfile_offsets, symbol_file_add)
(symbol_file_add_from_bfd)
(build_section_addr_info_from_section_table): Update.
(alloc_section_addr_info, free_section_addr_info): Don't declare.
* symfile.c (alloc_section_addr_info): Remove.
(build_section_addr_info_from_section_table): Change return type.
Update.
(build_section_addr_info_from_bfd)
(build_section_addr_info_from_objfile): Likewise.
(free_section_addr_info): Remove.
(relative_addr_info_to_section_offsets): Change type of "addrs".
(addrs_section_compar): Now a std::sort comparator.
(addrs_section_sort): Change return type.
(addr_info_make_relative): Change type of "addrs". Update.
(default_symfile_offsets, syms_from_objfile_1)
(syms_from_objfile, symbol_file_add_with_addrs): Likewise.
(symbol_file_add_separate): Update.
(symbol_file_add): Change type of "addrs". Update.
(add_symbol_file_command): Update. Remove cleanups.
* symfile-mem.c (symbol_file_add_from_memory): Update. Remove
cleanups.
* symfile-debug.c (debug_sym_offsets): Change type of "info".
* solib.c (solib_read_symbols): Update.
* objfiles.c (objfile_relocate): Update. Remove cleanups.
* machoread.c (macho_symfile_offsets): Update.
* jit.c (jit_bfd_try_read_symtab): Update.
|
|
jit.c uses the regcache in a slightly different way, the regcache dosen't
write through to target, but it has read and write methods. If I apply
regcache in record-full.c, it has the similar use pattern. This patch
adds a new class detached_regcache, a register buffer, but can be
read and written.
Since jit.c doesn't want to write registers through to target, it uses
regcache as a readonly regcache (because only readonly regcache
disconnects from the target), but it adds a hole in regcache
(raw_set_cached_value) in order to modify a readonly regcache. This patch
fixes this hole completely.
regcache inherits detached_regcache, and detached_regcache inherits
readable_regcache. The ideal design is that both detached_regcache and
readable_regcache inherit reg_buffer, and regcache inherit
detached_regcache and regcache_read (virtual inheritance). I concern
about the performance overhead of virtual inheritance, so I don't do it in
the patch.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* jit.c (struct jit_unwind_private) <regcache>: Change its type to
reg_buffer_rw *.
(jit_unwind_reg_set_impl): Call raw_supply.
(jit_frame_sniffer): Use reg_buffer_rw.
* record-full.c (record_full_core_regbuf): Change its type.
(record_full_core_open_1): Use reg_buffer_rw.
(record_full_close): Likewise.
(record_full_core_fetch_registers): Use regcache->raw_supply.
(record_full_core_store_registers): Likewise.
* regcache.c (regcache::get_register_status): Move it to
reg_buffer.
(regcache_raw_set_cached_value): Remove.
(regcache::raw_set_cached_value): Remove.
(regcache::raw_write): Call raw_supply.
(regcache::raw_supply): Move it to reg_buffer_rw.
* regcache.h (regcache_raw_set_cached_value): Remove.
(reg_buffer_rw): New class.
|
|
gdbarch_pseudo_register_read_value is not implemented in every gdbarch, so
the predicate gdbarch_pseudo_register_read_value_p is needed before
calling it. However, there is no such guard in jit_frame_prev_register, I
am wondering how does jit work on the arch without having gdbarch method
pseudo_register_read_value.
The proper way to get register value is to call cooked_read, and then
create the value object from the buffer.
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* jit.c (jit_frame_prev_register): Call regcache::cooked_read
instead of gdbarch_pseudo_register_read_value.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
Currently, we have a mess of symbol name hashing/comparison routines.
There's msymbol_hash for mangled names, and dict_hash and
msymbol_hash_iw for demangled names. Then there's strcmp_iw,
strcmp_iw_ordered and Ada's full_match/wild_match, which all have to
agree with the hashing routines. That's why dict_hash is really about
Ada names. From the inconsistency department, minimal symbol hashing
doesn't go via dict_hash, so Ada's wild matching can't ever work with
minimal symbols.
This patch starts fixing this, by doing two things:
#1 - adds a language vector method to let each language decide how to
compute a symbol name hash.
#2 - makes dictionaries know the language of the symbols they hold,
and then use the dictionaries language to decide which hashing
method to use.
For now, this is just scaffolding, since all languages install the
default method. The series will make C++ install its own hashing
method later on, and will add per-language symbol name comparison
routines too.
This patch was originally based on a patch that Keith wrote for the
libcc1/C++ WIP support.
gdb/ChangeLog:
2017-11-08 Keith Seitz <keiths@redhat.com>
Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_language_defn): Install
default_search_name_hash.
* buildsym.c (struct buildsym_compunit): <language>: New field.
(finish_block_internal): Pass language when creating dictionaries.
(start_buildsym_compunit, start_symtab): New language parameters.
Use them.
(restart_symtab): Pass down compilation unit's language.
* buildsym.h (enum language): Forward declare.
(start_symtab): New 'language' parameter.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Install
default_search_name_hash.
* coffread.c (coff_start_symtab): Adjust.
* d-lang.c (d_language_defn): Install default_search_name_hash.
* dbxread.c (struct symloc): Add 'pst_language' field.
(PST_LANGUAGE): Define.
(start_psymtab, read_ofile_symtab): Use it.
(process_one_symbol): New 'language' parameter. Pass it down.
* dictionary.c (struct dictionary) <language>: New field.
(DICT_LANGUAGE): Define.
(dict_create_hashed, dict_create_hashed_expandable)
(dict_create_linear, dict_create_linear_expandable): New parameter
'language'. Set the dictionary's language.
(iter_match_first_hashed): Adjust to rename.
(insert_symbol_hashed): Assert we don't see mismatching
languages. Adjust to rename.
(dict_hash): Rename to ...
(default_search_name_hash): ... this and make extern.
* dictionary.h (struct language_defn): Forward declare.
(dict_create_hashed): New parameter 'language'.
* dwarf2read.c (dwarf2_start_symtab): Pass down language.
* f-lang.c (f_language_defn): Install default_search_name_hash.
* go-lang.c (go_language_defn): Install default_search_name_hash.
* jit.c (finalize_symtab): Pass compunit's language to dictionary
creation.
* language.c (unknown_language_defn, auto_language_defn):
* language.h (language_defn::la_search_name_hash): New field.
(default_search_name_hash): Declare.
* m2-lang.c (m2_language_defn): Install default_search_name_hash.
* mdebugread.c (new_block): New parameter 'language'.
* mdebugread.c (parse_symbol): Pass symbol language to block
allocation.
(psymtab_to_symtab_1): Pass down language.
(new_symtab): Pass compunit's language to block allocation.
* objc-lang.c (objc_language_defn): Install
default_search_name_hash.
* opencl-lang.c (opencl_language_defn):
* p-lang.c (pascal_language_defn): Install
default_search_name_hash.
* rust-lang.c (rust_language_defn): Install
default_search_name_hash.
* stabsread.h (enum language): Forward declare.
(process_one_symbol): Add 'language' parameter.
* symtab.c (search_name_hash): New function.
* symtab.h (search_name_hash): Declare.
* xcoffread.c (read_xcoff_symtab): Pass language to start_symtab.
|
|
This changes add_com to take a cmd_const_cfunc_ftype, and then fixes
up all the command implementations.
In most cases this is trivial.
In a couple of places I had to again introduce a temporary non-const
overload. These overloads will be removed when add_info is
constified.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* solib.h (no_shared_libraries): Constify.
* frame.h (return_command): Constify.
* cli/cli-cmds.h (quit_command): Constify.
* top.h (quit_command, execute_command): Constify.
* target.h (flash_erase_command): Constify.
* inferior.h (set_inferior_args, attach_command): Constify.
* tracepoint.h (start_tracing, stop_tracing): Constify.
* breakpoint.h (break_command, tbreak_command)
(hbreak_command_wrapper, thbreak_command_wrapper)
(rbreak_command_wrapper, watch_command_wrapper)
(awatch_command_wrapper, rwatch_command_wrapper)
(get_tracepoint_by_number): Constify.
* symtab.c (info_variables_command, rbreak_command)
(symtab_symbol_info): Constify.
(info_variables_command): Add non-const overload.
* top.c (dont_repeat_command): Constify.
* breakpoint.c (ignore_command, commands_command)
(condition_command, tbreak_command, hbreak_command)
(thbreak_command, clear_command, break_command)
(info_breakpoints_command, watch_command, rwatch_command)
(awatch_command, trace_command, ftrace_command, strace_command)
(trace_pass_command, break_range_command, dprintf_command)
(agent_printf_command, get_tracepoint_by_number)
(watch_maybe_just_location, trace_pass_command): Constify.
(info_breakpoints_command): Add non-const overload.
* tracefile.c (tsave_command): Constify.
* infcmd.c (attach_command, disconnect_command, signal_command)
(queue_signal_command, stepi_command, nexti_command)
(finish_command, next_command, step_command, until_command)
(advance_command, jump_command, continue_command, run_command)
(start_command, starti_command, interrupt_command)
(run_command_1, set_inferior_args, step_1): Constify.
* inferior.c (add_inferior_command, remove_inferior_command)
(clone_inferior_command): Constify.
* linux-fork.c (checkpoint_command, restart_command): Constify.
* windows-nat.c (signal_event_command): Constify.
* guile/guile.c (guile_repl_command, guile_command): Constify.
* printcmd.c (x_command, display_command, printf_command)
(output_command, set_command, call_command, print_command)
(eval_command): Constify.
(non_const_set_command): Remove.
(_initialize_printcmd): Update.
* source.c (forward_search_command, reverse_search_command):
Constify.
* jit.c (jit_reader_load_command, jit_reader_unload_command):
Constify.
* infrun.c (handle_command): Constify.
* memattr.c (mem_command): Constify.
* stack.c (return_command, up_command, up_silently_command)
(down_command, down_silently_command, frame_command)
(backtrace_command, func_command, backtrace_command_1): Constify.
(backtrace_command): Add non-const overload.
* remote-sim.c (simulator_command): Constify.
* exec.c (set_section_command): Constify.
* tracepoint.c (tdump_command, trace_variable_command)
(tstatus_command, tstop_command, tstart_command)
(end_actions_pseudocommand, while_stepping_pseudocommand)
(collect_pseudocommand, teval_pseudocommand, actions_command)
(start_tracing, stop_tracing): Constify.
* value.c (init_if_undefined_command): Constify.
* tui/tui-stack.c (tui_update_command): Constify.
* tui/tui-win.c (tui_refresh_all_command)
(tui_set_tab_width_command, tui_set_win_height_command)
(tui_set_focus_command, tui_scroll_forward_command)
(tui_scroll_backward_command, tui_scroll_left_command)
(tui_scroll_right_command, parse_scrolling_args, tui_set_focus)
(tui_set_win_height): Constify.
* tui/tui-layout.c (tui_layout_command): Constify.
* procfs.c (proc_trace_syscalls, proc_trace_sysentry_cmd)
(proc_trace_sysexit_cmd, proc_untrace_sysentry_cmd)
(proc_untrace_sysexit_cmd): Constify.
* remote.c (threadlist_test_cmd, threadinfo_test_cmd)
(threadset_test_cmd, threadlist_update_test_cmd)
(threadalive_test): Constify.
* objc-lang.c (print_object_command): Constify.
* command.h (add_com): Constify.
* cli/cli-dump.c (restore_command): Constify.
* cli/cli-cmds.c (pwd_command, echo_command, quit_command)
(help_command, complete_command, shell_command, edit_command)
(list_command, disassemble_command, make_command)
(apropos_command, alias_command): Constify.
* cli/cli-script.c (document_command, define_command)
(while_command, if_command, validate_comname): Constify.
* cli/cli-decode.c (struct cmd_list_element): Change type of
"fun".
* target.c (do_monitor_command, flash_erase_command): Constify.
* regcache.c (reg_flush_command): Constify.
* reverse.c (reverse_step, reverse_next, reverse_stepi)
(reverse_nexti, reverse_continue, reverse_finish)
(save_bookmark_command, goto_bookmark_command)
(exec_reverse_once): Constify.
* python/python.c (python_interactive_command, python_command):
Constify.
* typeprint.c (ptype_command, whatis_command, whatis_exp):
Constify.
* solib.c (sharedlibrary_command, no_shared_libraries): Constify.
* gcore.c (gcore_command): Constify.
|
|
The address space is useless to readonly regcache, so this patch removes
the parameter to construct readonly regcache.
address_space was added in regcache by 6c95b8d, but for read-write
regcache. regcache::aspace is used for various breakpoint/watchpoint
checking, and these regcache are not read-only regcache.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* frame.c (do_frame_register_read): Remove aspace.
* jit.c (jit_frame_sniffer): Likwise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Likewise.
* regcache.c (regcache::regcache): Pass nullptr.
(regcache_print): Caller updated.
* regcache.h (regcache::regcache): Remove one constructor
parameter aspace.
|
|
regcache::m_aspace is a const, never changed during the lifetime of
regcache object. The address_space object is a const object too.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (insert_single_step_breakpoints): Update.
* frame.c (struct frame_info) <aspace>: Add const.
(frame_save_as_regcache): Add const.
(get_frame_address_space): Return const address_space *.
* frame.h (get_frame_address_space): Update declaration.
* infrun.c (struct step_over_info) <aspace>: Add const.
(set_step_over_info): Make aspace const.
(displaced_step_prepare_throw): Change variable const.
(resume): Likewise.
(proceed): Likewise.
(adjust_pc_after_break): Likewise.
(save_waitstatus): Likewise.
(handle_signal_stop): Likewise.
(keep_going_pass_signal): Likewise.
* jit.c (jit_frame_sniffer): Add const.
* mips-tdep.c (mips_single_step_through_delay): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Likewise.
* record-full.c (record_full_wait_1): Likewise.
* regcache.c (regcache::regcache): Change parameter to const.
* regcache.h (regcache::regcache): Likewise.
(regcache::aspace): Return const address_space *.
(regcache) <m_aspace>: Add const.
|
|
This patches removes get_regcache_arch, and use regache->arch () instead.
The motivation of this change is that I am going to move some basic stuff
into a base class of regcache. I don't need to update "client" code
regcache->arch (). On the other hand, this patch shortens the code a
little bit.
gdb:
2017-10-25 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_supply): Use
regcache->arch () instead get_regcache_arch.
* aarch64-fbsd-nat.c (aarch64_fbsd_fetch_inferior_registers):
Likewise.
(aarch64_fbsd_store_inferior_registers): Likewise.
* aarch64-linux-nat.c (fetch_gregs_from_thread): Likewise.
(store_gregs_to_thread): Likewise.
(fetch_fpregs_from_thread): Likewise.
(store_fpregs_to_thread): Likewise.
* aarch64-tdep.c (aarch64_extract_return_value): Likewise.
(aarch64_store_return_value): Likewise.
(aarch64_software_single_step): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
(supply_reg32): Likewise.
(supply_sprs64): Likewise.
(supply_sprs32): Likewise.
(fill_gprs64): Likewise.
(fill_gprs32): Likewise.
(fill_sprs64): Likewise.
(fill_sprs32): Likewise.
(store_regs_user_thread): Likewise.
(store_regs_kernel_thread): Likewise.
* alpha-bsd-nat.c (alphabsd_fetch_inferior_registers): Likewise.
(alphabsd_store_inferior_registers): Likewise.
* alpha-tdep.c (alpha_extract_return_value): Likewise.
(alpha_store_return_value): Likewise.
(alpha_deal_with_atomic_sequence): Likewise.
(alpha_next_pc): Likewise.
(alpha_software_single_step): Likewise.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise.
(amd64bsd_store_inferior_registers): Likewise.
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
Likewise.
(amd64_linux_store_inferior_registers): Likewise.
* amd64-nat.c (amd64_supply_native_gregset): Likewise.
(amd64_collect_native_gregset): Likewise.
* amd64-obsd-tdep.c (amd64obsd_supply_uthread): Likewise.
(amd64obsd_collect_uthread): Likewise.
* amd64-tdep.c (amd64_supply_fpregset): Likewise.
(amd64_collect_fpregset): Likewise.
(amd64_supply_fxsave): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_fxsave): Likewise.
(amd64_collect_xsave): Likewise.
* arc-tdep.c (arc_write_pc): Likewise.
* arch-utils.c (default_skip_permanent_breakpoint): Likewise.
* arm-fbsd-nat.c (arm_fbsd_fetch_inferior_registers): Likewise.
(arm_fbsd_store_inferior_registers): Likewise.
* arm-linux-nat.c (fetch_vfp_regs): Likewise.
(store_vfp_regs): Likewise.
(arm_linux_fetch_inferior_registers): Likewise.
(arm_linux_store_inferior_registers): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
(arm_linux_sigreturn_next_pc): Likewise.
(arm_linux_get_next_pcs_syscall_next_pc): Likewise.
* arm-nbsd-nat.c (arm_supply_gregset): Likewise.
(fetch_register): Likewise.
(store_register): Likewise.
* arm-tdep.c (arm_is_thumb): Likewise.
(displaced_in_arm_mode): Likewise.
(bx_write_pc): Likewise.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_software_single_step): Likewise.
(arm_extract_return_value): Likewise.
(arm_store_return_value): Likewise.
(arm_write_pc): Likewise.
* bfin-tdep.c (bfin_extract_return_value): Likewise.
* bsd-uthread.c (bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* core-regset.c (fetch_core_registers): Likewise.
* corelow.c (get_core_registers): Likewise.
* cris-tdep.c (cris_store_return_value): Likewise.
(cris_extract_return_value): Likewise.
(find_step_target): Likewise.
(find_step_target): Likewise.
(cris_software_single_step): Likewise.
* ctf.c (ctf_fetch_registers): Likewise.
* darwin-nat.c (cancel_breakpoint): Likewise.
* fbsd-tdep.c (fbsd_collect_thread_registers): Likewise.
* frv-tdep.c (frv_extract_return_value): Likewise.
* ft32-tdep.c (ft32_store_return_value): Likewise.
(ft32_extract_return_value): Likewise.
* go32-nat.c (fetch_register): Likewise.
(go32_fetch_registers): Likewise.
(go32_store_registers): Likewise.
(store_register): Likewise.
* h8300-tdep.c (h8300_extract_return_value): Likewise.
(h8300_store_return_value): Likewise.
* hppa-linux-nat.c (fetch_register): Likewise.
(store_register): Likewise.
(hppa_linux_fetch_inferior_registers): Likewise.
(hppa_linux_store_inferior_registers): Likewise.
* i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Likewise.
(i386_darwin_store_inferior_registers): Likewise.
* i386-gnu-nat.c (gnu_fetch_registers): Likewise.
(gnu_store_registers): Likewise.
* i386-linux-nat.c (fetch_register): Likewise.
(store_register): Likewise.
(supply_gregset): Likewise.
(fill_gregset): Likewise.
(i386_linux_fetch_inferior_registers): Likewise.
(i386_linux_store_inferior_registers): Likewise.
(i386_linux_resume): Likewise.
* i386-linux-tdep.c (i386_linux_get_syscall_number_from_regcache):
Likewise.
* i386-nto-tdep.c (i386nto_supply_gregset): Likewise.
* i386-obsd-nat.c (i386obsd_supply_pcb): Likewise.
* i386-obsd-tdep.c (i386obsd_supply_uthread): Likewise.
(i386obsd_collect_uthread): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_supply_fpregset): Likewise.
(i386_collect_fpregset): Likewise.
(i386_mpx_bd_base): Likewise.
* i386-v4-nat.c (supply_fpregset): Likewise.
(fill_fpregset): Likewise.
* i387-tdep.c (i387_supply_fsave): Likewise.
(i387_collect_fsave): Likewise.
(i387_supply_fxsave): Likewise.
(i387_collect_fxsave): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* ia64-linux-nat.c (ia64_linux_fetch_registers): Likewise.
(ia64_linux_store_registers): Likewise.
* ia64-tdep.c (ia64_access_rse_reg): Likewise.
(ia64_extract_return_value): Likewise.
(ia64_store_return_value): Likewise.
(find_func_descr): Likewise.
* inf-child.c (inf_child_fetch_inferior_registers): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_registers): Likewise.
(inf_ptrace_store_registers): Likewise.
* infrun.c (use_displaced_stepping): Likewise.
(displaced_step_prepare_throw): Likewise.
(resume): Likewise.
(proceed): Likewise.
(do_target_wait): Likewise.
(adjust_pc_after_break): Likewise.
(handle_inferior_event_1): Likewise.
(handle_signal_stop): Likewise.
(save_infcall_suspend_state): Likewise.
(restore_infcall_suspend_state): Likewise.
* iq2000-tdep.c (iq2000_extract_return_value): Likewise.
* jit.c (jit_frame_prev_register): Likewise.
* linux-nat.c (save_stop_reason): Likewise.
(linux_nat_wait_1): Likewise.
(resume_stopped_resumed_lwps): Likewise.
* linux-record.c (record_linux_sockaddr): Likewise.
(record_linux_msghdr): Likewise.
(record_linux_system_call): Likewise.
* linux-tdep.c (linux_collect_thread_registers): Likewise.
* lm32-tdep.c (lm32_extract_return_value): Likewise.
(lm32_store_return_value): Likewise.
* m32c-tdep.c (m32c_read_flg): Likewise.
(m32c_pseudo_register_read): Likewise.
(m32c_pseudo_register_write): Likewise.
* m32r-linux-tdep.c (m32r_linux_supply_gregset): Likewise.
(m32r_linux_collect_gregset): Likewise.
* m32r-tdep.c (m32r_store_return_value): Likewise.
(m32r_extract_return_value): Likewise.
* m68k-bsd-nat.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_collect_fpregset): Likewise.
* m68k-bsd-tdep.c (m68kbsd_supply_fpregset): Likewise.
* m68k-linux-nat.c (fetch_register): Likewise.
(old_fetch_inferior_registers): Likewise.
(old_store_inferior_registers): Likewise.
(store_regs): Likewise.
* m68k-tdep.c (m68k_svr4_extract_return_value): Likewise.
(m68k_svr4_store_return_value): Likewise.
* m88k-tdep.c (m88k_store_arguments): Likewise.
* mi/mi-main.c (mi_cmd_data_list_changed_registers): Likewise.
(mi_cmd_data_write_register_values): Likewise.
* mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers): Likewise.
(mips_fbsd_store_inferior_registers): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Likewise.
(mips_fbsd_supply_gregs): Likewise.
(mips_fbsd_collect_fpregs): Likewise.
(mips_fbsd_collect_gregs): Likewise.
(mips_fbsd_supply_fpregset): Likewise.
(mips_fbsd_collect_fpregset): Likewise.
(mips_fbsd_supply_gregset): Likewise.
(mips_fbsd_collect_gregset): Likewise.
* mips-linux-nat.c (supply_gregset): Likewise.
(fill_gregset): Likewise.
(supply_fpregset): Likewise.
(fill_fpregset): Likewise.
* mips-linux-tdep.c (mips_supply_gregset): Likewise.
(mips_fill_gregset): Likewise.
(mips_supply_fpregset): Likewise.
(mips_fill_fpregset): Likewise.
(mips64_supply_gregset): Likewise.
(micromips_linux_sigframe_validate): Likewise.
* mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise.
(mipsnbsd_fetch_inferior_registers): Likewise.
(mipsnbsd_store_inferior_registers): Likewise.
* mips-nbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise.
(mipsnbsd_supply_gregset): Likewise.
(mipsnbsd_iterate_over_regset_sections): Likewise.
(mipsnbsd_supply_reg): Likewise.
(mipsnbsd_supply_fpreg): Likewise.
* mips-tdep.c (mips_in_frame_stub): Likewise.
(mips_dummy_id): Likewise.
(is_octeon_bbit_op): Likewise.
(micromips_bc1_pc): Likewise.
(extended_mips16_next_pc): Likewise.
(mips16_next_pc): Likewise.
(deal_with_atomic_sequence): Likewise.
* moxie-tdep.c (moxie_process_readu): Likewise.
* nios2-tdep.c (nios2_get_next_pc): Likewise.
* nto-procfs.c (procfs_store_registers): Likewise.
* ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers): Likewise.
(ppcfbsd_store_inferior_registers): Likewise.
* ppc-linux-nat.c (fetch_vsx_register): Likewise.
(fetch_altivec_register): Likewise.
(get_spe_registers): Likewise.
(fetch_spe_register): Likewise.
(fetch_altivec_registers): Likewise.
(fetch_all_gp_regs): Likewise.
(fetch_all_fp_regs): Likewise.
(store_vsx_register): Likewise.
(store_altivec_register): Likewise.
(set_spe_registers): Likewise.
(store_spe_register): Likewise.
(store_altivec_registers): Likewise.
(store_all_gp_regs): Likewise.
(store_all_fp_regs): Likewise.
* ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise.
(ppc_linux_collect_gregset): Likewise.
(ppc_canonicalize_syscall): Likewise.
(ppc_linux_record_signal): Likewise.
(ppu2spu_prev_register): Likewise.
* ppc-nbsd-nat.c (ppcnbsd_supply_pcb): Likewise.
* ppc-obsd-nat.c (ppcobsd_fetch_registers): Likewise.
(ppcobsd_store_registers): Likewise.
* ppc-ravenscar-thread.c (ppc_ravenscar_generic_fetch_registers):
Likewise.
(ppc_ravenscar_generic_store_registers): Likewise.
* procfs.c (procfs_fetch_registers): Likewise.
(procfs_store_registers): Likewise.
* ravenscar-thread.c (ravenscar_fetch_registers): Likewise.
(ravenscar_store_registers): Likewise.
(ravenscar_prepare_to_store): Likewise.
* record-btrace.c (record_btrace_fetch_registers): Likewise.
* record-full.c (record_full_wait_1): Likewise.
(record_full_registers_change): Likewise.
(record_full_store_registers): Likewise.
(record_full_core_fetch_registers): Likewise.
(record_full_save): Likewise.
(record_full_goto_insn): Likewise.
* regcache.c (regcache_register_size): Likewise.
(get_regcache_arch): Remove.
(regcache_read_pc): Likewise.
* regcache.h (get_regcache_arch): Remove.
* remote-sim.c (gdbsim_fetch_register): Likewise.
(gdbsim_store_register): Likewise.
* remote.c (fetch_register_using_p): Likewise.
(send_g_packet): Likewise.
(remote_prepare_to_store): Likewise.
(store_registers_using_G): Likewise.
* reverse.c (save_bookmark_command): Likewise.
(goto_bookmark_command): Likewise.
* rs6000-aix-tdep.c (branch_dest): Likewise.
* rs6000-nat.c (rs6000_ptrace64): Likewise.
(fetch_register): Likewise.
* rs6000-tdep.c (ppc_supply_reg): Likewise.
(ppc_collect_reg): Likewise.
(ppc_collect_gregset): Likewise.
(ppc_collect_fpregset): Likewise.
(ppc_collect_vsxregset): Likewise.
(ppc_collect_vrregset): Likewise.
(ppc_displaced_step_hw_singlestep): Likewise.
(rs6000_pseudo_register_read): Likewise.
(rs6000_pseudo_register_write): Likewise.
* s390-linux-nat.c (supply_gregset): Likewise.
(fill_gregset): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.
* s390-linux-tdep.c (s390_write_pc): Likewise.
(s390_software_single_step): Likewise.
(s390_all_but_pc_registers_record): Likewise.
(s390_linux_syscall_record): Likewise.
* sentinel-frame.c (sentinel_frame_prev_arch): Likewise.
* sh-nbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise.
(shnbsd_store_inferior_registers): Likewise.
* sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
(sh_extract_return_value_fpu): Likewise.
(sh_store_return_value_nofpu): Likewise.
(sh_corefile_supply_regset): Likewise.
(sh_corefile_collect_regset): Likewise.
* sh64-tdep.c (sh64_extract_return_value): Likewise.
(sh64_store_return_value): Likewise.
* sparc-linux-tdep.c (sparc32_linux_collect_core_fpregset): Likewise.
* sparc-nat.c (sparc_fetch_inferior_registers): Likewise.
(sparc_store_inferior_registers): Likewise.
* sparc-ravenscar-thread.c (register_in_thread_descriptor_p): Likewise.
(sparc_ravenscar_prepare_to_store): Likewise.
* sparc-tdep.c (sparc32_store_arguments): Likewise.
(sparc_analyze_control_transfer): Likewise.
(sparc_step_trap): Likewise.
(sparc_software_single_step): Likewise.
(sparc32_gdbarch_init): Likewise.
(sparc_supply_rwindow): Likewise.
(sparc_collect_rwindow): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_collect_core_fpregset): Likewise.
* sparc64-nbsd-nat.c (sparc64nbsd_supply_gregset): Likewise.
(sparc64nbsd_collect_gregset): Likewise.
(sparc64nbsd_supply_fpregset): Likewise.
(sparc64nbsd_collect_fpregset): Likewise.
* sparc64-tdep.c (sparc64_store_arguments): Likewise.
(sparc64_supply_gregset): Likewise.
(sparc64_collect_gregset): Likewise.
(sparc64_supply_fpregset): Likewise.
(sparc64_collect_fpregset): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-tdep.c (spu_unwind_sp): Likewise.
(spu2ppu_prev_register): Likewise.
(spu_memory_remove_breakpoint): Likewise.
* stack.c (return_command): Likewise.
* tic6x-tdep.c (tic6x_extract_signed_field): Likewise.
* tracefile-tfile.c (tfile_fetch_registers): Likewise.
* tracefile.c (trace_save_ctf): Likewise.
* windows-nat.c (do_windows_fetch_inferior_registers): Likewise.
(do_windows_store_inferior_registers): Likewise.
(windows_resume): Likewise.
* xtensa-linux-nat.c (fill_gregset): Likewise.
(supply_gregset_reg): Likewise.
* xtensa-tdep.c (xtensa_register_write_masked): Likewise.
(xtensa_register_read_masked): Likewise.
(xtensa_supply_gregset): Likewise.
(xtensa_extract_return_value): Likewise.
(xtensa_store_return_value): Likewise.
|
|
This changes objfiles to use new and delete rather than xmalloc and
free. Simon noticed that it uses a non-POD and so shouldn't be
allocated with XCNEW; and I wanted to be able to use another non-POD as
a member; this patch is the result.
Regression tested by the buildbot.
2017-10-13 Tom Tromey <tom@tromey.com>
* compile/compile-object-run.c (do_module_cleanup): Use delete.
* solib.c (update_solib_list, reload_shared_libraries_1): Use
delete.
* symfile.c (symbol_file_add_with_addrs): Use new.
(symbol_file_add_separate): Update comment.
(syms_from_objfile_1, remove_symbol_file_command): Use delete.
* jit.c (jit_object_close_impl): Use new.
(jit_unregister_code): Use delete.
* objfiles.c (objfile::objfile): Rename from allocate_objfile.
(~objfile): Rename from free_objfile.
(free_objfile_separate_debug, do_free_objfile_cleanup)
(free_all_objfiles, objfile_purge_solibs): Use delete.
* objfiles.h (struct objfile): Add constructor and destructor.
Use DISABLE_COPY_AND_ASSIGN. Add initializers to data members.
(allocate_objfile, free_objfile): Don't declare.
(struct objstats): Add initializers.
|
|
This changes the interfaces to init_type and arch_type to take the
type length in bits as input (instead of as bytes). The routines
assert that the length is a multiple of TARGET_CHAR_BIT.
For consistency, arch_flags_type is changed likewise, so that now
all type creation interfaces always use length in bits.
All callers are updated in the straightforward manner.
The assert actually found a bug in read_range_type, where the
init_integer_type routine was called with a wrong argument (probably
a bug introduced with the conversion to use init_integer_type).
gdb/ChangeLog
2017-09-27 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.c (init_type): Change incoming argument from
length-in-bytes to length-in-bits. Assert length is a
multiple of TARGET_CHAR_BITS.
(arch_type, arch_flags_type): Likewise.
(init_integer_type): Update call to init_type.
(init_character_type): Likewise.
(init_boolean_type): Likewise.
(init_float_type): Likewise.
(init_decfloat_type): Likewise.
(init_complex_type): Likewise.
(init_pointer_type): Likewise.
(objfile_type): Likewise.
(arch_integer_type): Update call to arch_type.
(arch_character_type): Likewise.
(arch_boolean_type): Likewise.
(arch_float_type): Likewise.
(arch_decfloat_type): Likewise.
(arch_complex_type): Likewise.
(arch_pointer_type): Likewise.
(gdbtypes_post_init): Likewise.
* dwarf2read.c (dwarf2_init_float_type): Update call to init_type.
(read_base_type): Likewise.
* mdebugread.c (basic_type): Likewise.
* stabsread.c (dbx_init_float_type): Likewise.
(rs6000_builtin_type): Likewise.
(read_range_type): Likewise. Also, fix call to init_integer_type
with erroneous length argument.
* ada-lang.c (ada_language_arch_info): Update call to arch_type.
* d-lang.c (build_d_types): Likewise.
* f-lang.c (build_fortran_types): Likewise.
* go-lang.c (build_go_types): Likewise.
* opencl-lang.c (build_opencl_types): Likewise.
* jit.c (finalize_symtab): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
(build_std_type_info_type): Likewise.
* target-descriptions.c (tdesc_gdb_type): Likewise. Also,
update call to arch_flags_type.
* linux-tdep.c (linux_get_siginfo_type_with_fields): Update call to
arch_type.
* fbsd-tdep.c (fbsd_get_siginfo_type): Likewise.
* windows-tdep.c (windows_get_tlb_type): Likewise.
* avr-tdep.c (avr_gdbarch_init): Update call to arch_type.
* ft32-tdep.c (ft32_gdbarch_init): Likewise.
* m32c-tdep.c (make_types): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
(rl78_psw_type): Update call to arch_flags_type.
* m68k-tdep.c (m68k_ps_type): Update call to arch_flags_type.
* rx-tdep.c (rx_psw_type): Likewise.
(rx_fpsw_type): Likewise.
* sparc-tdep.c (sparc_psr_type): Likewise.
(sparc_fsr_type): Likewise.
* sparc64-tdep.c (sparc64_pstate_type): Likewise.
(sparc64_ccr_type): Likewise.
(sparc64_fsr_type): Likewise.
(sparc64_fprs_type): Likewise.
|
|
This removes regcache_xfree in favor of plain "delete".
gdb/ChangeLog
2017-09-25 Tom Tromey <tom@tromey.com>
* spu-tdep.c (spu2ppu_dealloc_cache): Use delete.
* regcache.h (regcache_xfree): Don't declare.
* regcache.c (regcache_xfree): Remove.
(do_regcache_xfree): Use delete.
* ppc-linux-tdep.c (ppu2spu_dealloc_cache): Use delete.
* linux-fork.c (free_fork): Use delete.
(fork_save_infrun_state): Likewise.
* jit.c (jit_dealloc_cache): Use delete.
* infrun.c (discard_infcall_suspend_state): Use delete.
|
|
This patch removes regcache_xmalloc in favor of plain "new".
gdb/ChangeLog
2017-09-25 Tom Tromey <tom@tromey.com>
* regcache.h (regcache_xmalloc): Don't declare.
(regcache_raw_set_cached_value): Update comment.
* regcache.c (regcache_xmalloc): Remove.
* ppc-linux-tdep.c (ppu2spu_sniffer): Use new.
* jit.c (jit_frame_sniffer): Use new.
* frame.c (frame_save_as_regcache): Use new.
|
|
We have many classes that copy cotr and assignment operator are deleted,
so this patch replaces these existing mechanical code with macro
DISABLE_COPY_AND_ASSIGN.
gdb:
2017-09-19 Yao Qi <yao.qi@linaro.org>
* annotate.h (struct annotate_arg_emitter): Use
DISABLE_COPY_AND_ASSIGN.
* common/refcounted-object.h (refcounted_object): Likewise.
* completer.h (struct completion_result): Likewise.
* dwarf2read.c (struct dwarf2_per_objfile): Likewise.
* filename-seen-cache.h (filename_seen_cache): Likewise.
* gdbcore.h (thread_section_name): Likewise.
* gdb_regex.h (compiled_regex): Likewise.
* gdbthread.h (scoped_restore_current_thread): Likewise.
* inferior.h (scoped_restore_current_inferior): Likewise.
* jit.c (jit_reader): Likewise.
* linespec.h (struct linespec_result): Likewise.
* mi/mi-parse.h (struct mi_parse): Likewise.
* nat/fork-inferior.c (execv_argv): Likewise.
* progspace.h (scoped_restore_current_program_space): Likewise.
* python/python-internal.h (class gdbpy_enter): Likewise.
* regcache.h (regcache): Likewise.
* target-descriptions.c (struct tdesc_reg): Likewise.
(struct tdesc_type): Likewise.
(struct tdesc_feature): Likewise.
* ui-out.h (ui_out_emit_type): Likewise.
|
|
These prototypes were required when compiling GDB as C but are not
required for C++.
gdb/ChangeLog:
* aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat
prototype.
* aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep
prototype.
* aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep
prototype.
* aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype.
* ada-exp.y: Remove _initialize_ada_exp prototype.
* ada-lang.c: Remove _initialize_ada_language prototype.
* ada-tasks.c: Remove _initialize_tasks prototype.
* addrmap.c: Remove _initialize_addrmap prototype.
* agent.c: Remove _initialize_agent prototype.
* aix-thread.c: Remove _initialize_aix_thread prototype.
* alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype.
* alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype.
* alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep
prototype.
* alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype.
* alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype.
* alpha-tdep.c: Remove _initialize_alpha_tdep prototype.
* amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep
prototype.
* amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep
prototype.
* amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype.
* amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype.
* amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype.
* amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep
prototype.
* amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype.
* amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype.
* amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype.
* amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype.
* amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* amd64-tdep.c: Remove _initialize_amd64_tdep prototype.
* amd64-windows-nat.c: Remove _initialize_amd64_windows_nat
prototype.
* amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep
prototype.
* annotate.c: Remove _initialize_annotate prototype.
* arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype.
* arc-tdep.c: Remove _initialize_arc_tdep prototype.
* arch-utils.c: Remove _initialize_gdbarch_utils prototype.
* arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype.
* arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype.
* arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype.
* arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype.
* arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep
prototype.
* arm-tdep.c: Remove _initialize_arm_tdep prototype.
* arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype.
* auto-load.c: Remove _initialize_auto_load prototype.
* auxv.c: Remove _initialize_auxv prototype.
* avr-tdep.c: Remove _initialize_avr_tdep prototype.
* ax-gdb.c: Remove _initialize_ax_gdb prototype.
* bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype.
* bfin-tdep.c: Remove _initialize_bfin_tdep prototype.
* break-catch-sig.c: Remove _initialize_break_catch_sig prototype.
* break-catch-syscall.c: Remove _initialize_break_catch_syscall
prototype.
* break-catch-throw.c: Remove _initialize_break_catch_throw
prototype.
* breakpoint.c: Remove _initialize_breakpoint prototype.
* bsd-uthread.c: Remove _initialize_bsd_uthread prototype.
* btrace.c: Remove _initialize_btrace prototype.
* charset.c: Remove _initialize_charset prototype.
* cli/cli-cmds.c: Remove _initialize_cli_cmds prototype.
* cli/cli-dump.c: Remove _initialize_cli_dump prototype.
* cli/cli-interp.c: Remove _initialize_cli_interp prototype.
* cli/cli-logging.c: Remove _initialize_cli_logging prototype.
* cli/cli-script.c: Remove _initialize_cli_script prototype.
* coff-pe-read.c: Remove _initialize_coff_pe_read prototype.
* coffread.c: Remove _initialize_coffread prototype.
* compile/compile.c: Remove _initialize_compile prototype.
* complaints.c: Remove _initialize_complaints prototype.
* completer.c: Remove _initialize_completer prototype.
* copying.awk: Remove _initialize_copying prototype.
* copying.c: Regenerate.
* core-regset.c: Remove _initialize_core_regset prototype.
* corefile.c: Remove _initialize_core prototype.
* corelow.c: Remove _initialize_corelow prototype.
* cp-abi.c: Remove _initialize_cp_abi prototype.
* cp-namespace.c: Remove _initialize_cp_namespace prototype.
* cp-support.c: Remove _initialize_cp_support prototype.
* cp-valprint.c: Remove _initialize_cp_valprint prototype.
* cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype.
* cris-tdep.c: Remove _initialize_cris_tdep prototype.
* ctf.c: Remove _initialize_ctf prototype.
* d-lang.c: Remove _initialize_d_language prototype.
* darwin-nat-info.c: Remove _initialize_darwin_info_commands
prototype.
* darwin-nat.c: Remove _initialize_darwin_inferior prototype.
* dbxread.c: Remove _initialize_dbxread prototype.
* dcache.c: Remove _initialize_dcache prototype.
* demangle.c: Remove _initialize_demangler prototype.
* disasm-selftests.c: Remove _initialize_disasm_selftests
prototype.
* disasm.c: Remove _initialize_disasm prototype.
* dtrace-probe.c: Remove _initialize_dtrace_probe prototype.
* dummy-frame.c: Remove _initialize_dummy_frame prototype.
* dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame
prototype.
* dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype.
* dwarf2expr.c: Remove _initialize_dwarf2expr prototype.
* dwarf2loc.c: Remove _initialize_dwarf2loc prototype.
* dwarf2read.c: Remove _initialize_dwarf2_read prototype.
* elfread.c: Remove _initialize_elfread prototype.
* exec.c: Remove _initialize_exec prototype.
* extension.c: Remove _initialize_extension prototype.
* f-lang.c: Remove _initialize_f_language prototype.
* f-valprint.c: Remove _initialize_f_valprint prototype.
* fbsd-nat.c: Remove _initialize_fbsd_nat prototype.
* fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype.
* filesystem.c: Remove _initialize_filesystem prototype.
* findcmd.c: Remove _initialize_mem_search prototype.
* fork-child.c: Remove _initialize_fork_child prototype.
* frame-base.c: Remove _initialize_frame_base prototype.
* frame-unwind.c: Remove _initialize_frame_unwind prototype.
* frame.c: Remove _initialize_frame prototype.
* frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype.
* frv-tdep.c: Remove _initialize_frv_tdep prototype.
* ft32-tdep.c: Remove _initialize_ft32_tdep prototype.
* gcore.c: Remove _initialize_gcore prototype.
* gdb_bfd.c: Remove _initialize_gdb_bfd prototype.
* gdbarch.c: Regenerate.
* gdbarch.sh: Remove _initialize_gdbarch prototype.
* gdbtypes.c: Remove _initialize_gdbtypes prototype.
* gnu-nat.c: Remove _initialize_gnu_nat prototype.
* gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype.
* gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype.
* go-lang.c: Remove _initialize_go_language prototype.
* go32-nat.c: Remove _initialize_go32_nat prototype.
* guile/guile.c: Remove _initialize_guile prototype.
* h8300-tdep.c: Remove _initialize_h8300_tdep prototype.
* hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype.
* hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype.
* hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype.
* hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype.
* hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype.
* hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype.
* hppa-tdep.c: Remove _initialize_hppa_tdep prototype.
* i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype.
* i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep
prototype.
* i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep
prototype.
* i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype.
* i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype.
* i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype.
* i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype.
* i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype.
* i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype.
* i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype.
* i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype.
* i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype.
* i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype.
* i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype.
* i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype.
* i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype.
* i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* i386-tdep.c: Remove _initialize_i386_tdep prototype.
* i386-windows-nat.c: Remove _initialize_i386_windows_nat
prototype.
* ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame
prototype.
* ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype.
* ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype.
* ia64-tdep.c: Remove _initialize_ia64_tdep prototype.
* ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype.
* infcall.c: Remove _initialize_infcall prototype.
* infcmd.c: Remove _initialize_infcmd prototype.
* inferior.c: Remove _initialize_inferiors prototype.
* inflow.c: Remove _initialize_inflow prototype.
* infrun.c: Remove _initialize_infrun prototype.
* interps.c: Remove _initialize_interpreter prototype.
* iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype.
* jit.c: Remove _initialize_jit prototype.
* language.c: Remove _initialize_language prototype.
* linux-fork.c: Remove _initialize_linux_fork prototype.
* linux-nat.c: Remove _initialize_linux_nat prototype.
* linux-tdep.c: Remove _initialize_linux_tdep prototype.
* linux-thread-db.c: Remove _initialize_thread_db prototype.
* lm32-tdep.c: Remove _initialize_lm32_tdep prototype.
* m2-lang.c: Remove _initialize_m2_language prototype.
* m32c-tdep.c: Remove _initialize_m32c_tdep prototype.
* m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype.
* m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype.
* m32r-tdep.c: Remove _initialize_m32r_tdep prototype.
* m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype.
* m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-tdep.c: Remove _initialize_m68k_tdep prototype.
* m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* machoread.c: Remove _initialize_machoread prototype.
* macrocmd.c: Remove _initialize_macrocmd prototype.
* macroscope.c: Remove _initialize_macroscope prototype.
* maint.c: Remove _initialize_maint_cmds prototype.
* mdebugread.c: Remove _initialize_mdebugread prototype.
* memattr.c: Remove _initialize_mem prototype.
* mep-tdep.c: Remove _initialize_mep_tdep prototype.
* mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype.
* mi/mi-cmds.c: Remove _initialize_mi_cmds prototype.
* mi/mi-interp.c: Remove _initialize_mi_interp prototype.
* mi/mi-main.c: Remove _initialize_mi_main prototype.
* microblaze-linux-tdep.c: Remove
_initialize_microblaze_linux_tdep prototype.
* microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype.
* mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype.
* mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype.
* mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype.
* mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype.
* mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype.
* mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype.
* mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype.
* mips-tdep.c: Remove _initialize_mips_tdep prototype.
* mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype.
* mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep
prototype.
* mipsread.c: Remove _initialize_mipsread prototype.
* mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep
prototype.
* mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype.
* moxie-tdep.c: Remove _initialize_moxie_tdep prototype.
* msp430-tdep.c: Remove _initialize_msp430_tdep prototype.
* mt-tdep.c: Remove _initialize_mt_tdep prototype.
* nds32-tdep.c: Remove _initialize_nds32_tdep prototype.
* nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep
prototype.
* nios2-tdep.c: Remove _initialize_nios2_tdep prototype.
* nto-procfs.c: Remove _initialize_procfs prototype.
* nto-tdep.c: Remove _initialize_nto_tdep prototype.
* objc-lang.c: Remove _initialize_objc_language prototype.
* objfiles.c: Remove _initialize_objfiles prototype.
* observer.c: Remove observer_test_first_notification_function,
observer_test_second_notification_function,
observer_test_third_notification_function, and
_initialize_observer prototypes.
* opencl-lang.c: Remove _initialize_opencl_language prototypes.
* osabi.c: Remove _initialize_gdb_osabi prototype.
* osdata.c: Remove _initialize_osdata prototype.
* p-valprint.c: Remove _initialize_pascal_valprint prototype.
* parse.c: Remove _initialize_parse prototype.
* ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype.
* ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype.
* ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype.
* ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype.
* ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype.
* ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype.
* ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype.
* ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype.
* printcmd.c: Remove _initialize_printcmd prototype.
* probe.c: Remove _initialize_probe prototype.
* proc-api.c: Remove _initialize_proc_api prototype.
* proc-events.c: Remove _initialize_proc_events prototype.
* proc-service.c: Remove _initialize_proc_service prototype.
* procfs.c: Remove _initialize_procfs prototype.
* psymtab.c: Remove _initialize_psymtab prototype.
* python/python.c: Remove _initialize_python prototype.
* ravenscar-thread.c: Remove _initialize_ravenscar prototype.
* record-btrace.c: Remove _initialize_record_btrace prototype.
* record-full.c: Remove _initialize_record_full prototype.
* record.c: Remove _initialize_record prototype.
* regcache.c: Remove _initialize_regcache prototype.
* reggroups.c: Remove _initialize_reggroup prototype.
* remote-notif.c: Remove _initialize_notif prototype.
* remote-sim.c: Remove _initialize_remote_sim prototype.
* remote.c: Remove _initialize_remote prototype.
* reverse.c: Remove _initialize_reverse prototype.
* rl78-tdep.c: Remove _initialize_rl78_tdep prototype.
* rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype.
* rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep
prototype.
* rs6000-nat.c: Remove _initialize_rs6000_nat prototype.
* rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype.
* rust-exp.y: Remove _initialize_rust_exp prototype.
* rx-tdep.c: Remove _initialize_rx_tdep prototype.
* s390-linux-nat.c: Remove _initialize_s390_nat prototype.
* s390-linux-tdep.c: Remove _initialize_s390_tdep prototype.
* score-tdep.c: Remove _initialize_score_tdep prototype.
* selftest-arch.c: Remove _initialize_selftests_foreach_arch
prototype.
* ser-go32.c: Remove _initialize_ser_dos prototype.
* ser-mingw.c: Remove _initialize_ser_windows prototype.
* ser-pipe.c: Remove _initialize_ser_pipe prototype.
* ser-tcp.c: Remove _initialize_ser_tcp prototype.
* ser-unix.c: Remove _initialize_ser_hardwire prototype.
* serial.c: Remove _initialize_serial prototype.
* sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype.
* sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype.
* sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype.
* sh-tdep.c: Remove _initialize_sh_tdep prototype.
* skip.c: Remove _initialize_step_skip prototype.
* sol-thread.c: Remove _initialize_sol_thread prototype.
* solib-aix.c: Remove _initialize_solib_aix prototype.
* solib-darwin.c: Remove _initialize_darwin_solib prototype.
* solib-dsbt.c: Remove _initialize_dsbt_solib prototype.
* solib-frv.c: Remove _initialize_frv_solib prototype.
* solib-spu.c: Remove _initialize_spu_solib prototype.
* solib-svr4.c: Remove _initialize_svr4_solib prototype.
* solib-target.c: Remove _initialize_solib_target prototype.
* solib.c: Remove _initialize_solib prototype.
* source.c: Remove _initialize_source prototype.
* sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype.
* sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep
prototype.
* sparc-nat.c: Remove _initialize_sparc_nat prototype.
* sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype.
* sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype.
* sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep
prototype.
* sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype.
* sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype.
* sparc-tdep.c: Remove _initialize_sparc_tdep prototype.
* sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat
prototype.
* sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep
prototype.
* sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat
prototype.
* sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep
prototype.
* sparc64-nat.c: Remove _initialize_sparc64_nat prototype.
* sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat
prototype.
* sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep
prototype.
* sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat
prototype.
* sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep
prototype.
* sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep
prototype.
* spu-linux-nat.c: Remove _initialize_spu_nat prototype.
* spu-multiarch.c: Remove _initialize_spu_multiarch prototype.
* spu-tdep.c: Remove _initialize_spu_tdep prototype.
* stabsread.c: Remove _initialize_stabsread prototype.
* stack.c: Remove _initialize_stack prototype.
* stap-probe.c: Remove _initialize_stap_probe prototype.
* std-regs.c: Remove _initialize_frame_reg prototype.
* symfile-debug.c: Remove _initialize_symfile_debug prototype.
* symfile-mem.c: Remove _initialize_symfile_mem prototype.
* symfile.c: Remove _initialize_symfile prototype.
* symmisc.c: Remove _initialize_symmisc prototype.
* symtab.c: Remove _initialize_symtab prototype.
* target-dcache.c: Remove _initialize_target_dcache prototype.
* target-descriptions.c: Remove _initialize_target_descriptions
prototype.
* thread.c: Remove _initialize_thread prototype.
* tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep
prototype.
* tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype.
* tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype.
* tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep
prototype.
* tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype.
* tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype.
* tracefile.c: Remove _initialize_tracefile prototype.
* tracepoint.c: Remove _initialize_tracepoint prototype.
* tui/tui-hooks.c: Remove _initialize_tui_hooks prototype.
* tui/tui-interp.c: Remove _initialize_tui_interp prototype.
* tui/tui-layout.c: Remove _initialize_tui_layout prototype.
* tui/tui-regs.c: Remove _initialize_tui_regs prototype.
* tui/tui-stack.c: Remove _initialize_tui_stack prototype.
* tui/tui-win.c: Remove _initialize_tui_win prototype.
* tui/tui.c: Remove _initialize_tui prototype.
* typeprint.c: Remove _initialize_typeprint prototype.
* user-regs.c: Remove _initialize_user_regs prototype.
* utils.c: Remove _initialize_utils prototype.
* v850-tdep.c: Remove _initialize_v850_tdep prototype.
* valarith.c: Remove _initialize_valarith prototype.
* valops.c: Remove _initialize_valops prototype.
* valprint.c: Remove _initialize_valprint prototype.
* value.c: Remove _initialize_values prototype.
* varobj.c: Remove _initialize_varobj prototype.
* vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype.
* vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype.
* vax-tdep.c: Remove _initialize_vax_tdep prototype.
* windows-nat.c: Remove _initialize_windows_nat,
_initialize_check_for_gdb_ini, and _initialize_loadable
prototypes.
* windows-tdep.c: Remove _initialize_windows_tdep prototype.
* xcoffread.c: Remove _initialize_xcoffread prototype.
* xml-support.c: Remove _initialize_xml_support prototype.
* xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype.
* xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat
prototype.
* xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep
prototype.
* xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.
|
|
This removes some cleanups from jit.c by using unique_xmalloc_ptr
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* jit.c (jit_reader_load_command): Use unique_xmalloc_ptr.
|
|
This introduces gdb_dlhandle_up, a unique_ptr that can close a
dlopen'd library. All the functions working with dlopen handles are
updated to use this new type.
I did not try to build this on Windows.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* jit.c (struct jit_reader): Declare separately. Add constructor
and destructor. Change type of "handle".
(loaded_jit_reader): Define separately.
(jit_reader_load): Update. New "new".
(jit_reader_unload_command): Use "delete".
* gdb-dlfcn.h (struct dlclose_deleter): New.
(gdb_dlhandle_up): New typedef.
(gdb_dlopen, gdb_dlsym): Update types.
(gdb_dlclose): Remove.
* gdb-dlfcn.c (gdb_dlopen): Return a gdb_dlhandle_up.
(gdb_dlsym): Change type of "handle".
(make_cleanup_dlclose): Remove.
(dlclose_deleter::operator()): Rename from gdb_dlclose.
* compile/compile-c-support.c (load_libcc): Update.
|
|
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Even though this was supposedly in the gdb 7.2 timeframe, the testcase
in PR11094 crashes current GDB with a segfault:
Program received signal SIGSEGV, Segmentation fault.
0x00000000005ee894 in event_location_to_string (location=0x0) at
src/gdb/location.c:412
412 if (EL_STRING (location) == NULL)
(top-gdb) bt
#0 0x00000000005ee894 in event_location_to_string (location=0x0) at
src/gdb/location.c:412
#1 0x000000000057411a in print_breakpoint_location (b=0x18288e0, loc=0x0) at
src/gdb/breakpoint.c:6201
#2 0x000000000057483f in print_one_breakpoint_location (b=0x18288e0,
loc=0x182cf10, loc_number=0, last_loc=0x7fffffffd258, allflag=1)
at src/gdb/breakpoint.c:6473
#3 0x00000000005751e1 in print_one_breakpoint (b=0x18288e0,
last_loc=0x7fffffffd258, allflag=1) at
src/gdb/breakpoint.c:6707
#4 0x000000000057589c in breakpoint_1 (args=0x0, allflag=1, filter=0x0) at
src/gdb/breakpoint.c:6947
#5 0x0000000000575aa8 in maintenance_info_breakpoints (args=0x0, from_tty=0)
at src/gdb/breakpoint.c:7026
[...]
This is GDB trying to print the location spec of the JIT event
breakpoint, but that's an internal breakpoint without one.
If I add a NULL check, then we see that the JIT breakpoint is now
pending (because its location has shlib_disabled set):
(gdb) maint info breakpoints
Num Type Disp Enb Address What
[...]
-8 jit events keep y <PENDING> inf 1
[...]
But that's incorrect. GDB should have managed to recreate the JIT
breakpoint's location for the second run. So the problem is
elsewhere.
The problem is that if the JIT loads at the same address on the second
run, we never recreate the JIT breakpoint, because we hit this early
return:
static int
jit_breakpoint_re_set_internal (struct gdbarch *gdbarch,
struct jit_program_space_data *ps_data)
{
[...]
if (ps_data->cached_code_address == addr)
return 0;
[...]
delete_breakpoint (ps_data->jit_breakpoint);
[...]
ps_data->jit_breakpoint = create_jit_event_breakpoint (gdbarch, addr);
Fix this by deleting the breakpoint and discarding the cached code
address when the objfile where the previous JIT breakpoint was found
is deleted/unloaded in the first place.
The test that was originally added for PR11094 doesn't trip on this
because:
#1 - It doesn't test the case of the JIT descriptor's address _not_
changing between reruns.
#2 - And then it doesn't do "maint info breakpoints", or really
anything with the JIT at all.
#3 - and even then, to trigger the problem the JIT descriptor needs
to be in a separate library, while the current test puts it in
the main program.
The patch extends the test to cover all combinations of these
scenarios.
gdb/ChangeLog:
2016-10-06 Pedro Alves <palves@redhat.com>
* jit.c (free_objfile_data): Delete the JIT breakpoint and clear
the cached code address.
gdb/testsuite/ChangeLog:
2016-10-06 Pedro Alves <palves@redhat.com>
* gdb.base/jit-simple-dl.c: New file.
* gdb.base/jit-simple-jit.c: New file, factored out from ...
* gdb.base/jit-simple.c: ... this.
* gdb.base/jit-simple.exp (jit_run): Delete.
(build_jit): New proc.
(jit_test_reread): Recompile either the main program or the shared
library, depending on what is being tested. Skip changing address
if caller wants to. Compare before/after addresses. If testing
standalone, explicitly load the binary. Test "maint info
breakpoints".
(top level): Add "standalone vs shared lib" and "change address"
vs "same address" axes.
|
|
This patch removes set-but-unused variables. This holds all the
removals I consider to be simple and relatively uncontroversial.
2016-07-14 Tom Tromey <tom@tromey.com>
* mips-tdep.c (micromips_scan_prologue): Remove "frame_addr".
(mips_o32_push_dummy_call): Remove "stack_used_p".
* aarch64-tdep.c (aarch64_record_data_proc_imm): Remove
"insn_bit28".
* rust-lang.c (rust_print_type): Remove "len".
* rust-exp.y (super_name): Remove "current_len".
* python/py-framefilter.c (py_print_type): Remove "type".
* mdebugread.c (parse_partial_symbols): Remove
"past_first_source_file".
<N_SO>: Remove "valu", "first_so_symnum", "prev_textlow_not_set".
* m2-valprint.c (m2_print_unbounded_array): Remove
"content_type".
(m2_val_print): Remove "i".
* linespec.c (unexpected_linespec_error): Remove "cleanup".
* f-valprint.c (f_val_print): Remove "i".
* elfread.c (elf_symtab_read): Remove "offset".
* dwarf2-frame.c (dwarf2_fetch_cfa_info): Remove "addr_size".
* jit.c (jit_dealloc_cache): Remove "i" and "frame_arch".
|
|
PR cli/18053 concerns a couple of minor bugs in the JIT debuginfo
support. First, jit-reader-load should use filename completion and
support tilde expansion. Second, the help for jit-reader-unload is
incorrect. While working on this I also realized that
jit-reader-unload should use the no-op completer, so I've included
that as well.
Built and regtested on x86-64 Fedora 23. A completer test for
jit-reader-load is included, but not a tilde-expansion test, as I
couldn't think of a reliable way to test that.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* jit.c (jit_reader_load_command): Use tilde_expand.
(_initialize_jit): Fix help for jit-reader-unload. Set completer
for new commands.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* gdb.base/jit-so.exp (one_jit_test): Add jit-reader-load
completion test.
|
|
The jit-reader.exp test isn't really exercising the jit-reader's
unwinder API at all. This commit address that, and then fixes GDB
problems exposed.
- The custom JIT reader provided for the jit-reader.exp testcase
always rejects the jitted function's frame...
This is because the custom JIT reader in the testcase never ever
sets state->code_begin/end, so the bounds check in
gdb.base/jitreader.c:unwind_frame:
if (this_ip >= state->code_end || this_ip < state->code_begin)
return GDB_FAIL;
tends to fail, unless you're "lucky" (because it references
uninitialized data).
The result is that GDB is always actually using a built-in unwinder
for the jitted function.
- The provided unwinder doesn't do anything that GDB's built-in
unwinder can't do.
IOW, we can't really tell whether the JIT reader's unwinder is
working or not.
I fixed that by making the jitted function mangle its own stack
pointer with a xor, and then teaching the jit unwinder to demangle
it back (another xor). So now "backtrace" with GDB's built-in
unwinder fails while with the jit unwinder, it succeeds.
- GDB crashes after unloading the JIT reader, and flushing frames...
I made the testcase use the "flushregs" command after unloading the
JIT reader, to force the JIT frames to be flushed. However, that
crashes GDB...
When reinit_frame_cache tears down a frame's cache, it calls its
unwinder's dealloc_cache method, which for JIT frames ends up in
jit.c:jit_dealloc_cache. This function calls each of the frame's
gdb_reg_value's "free" pointer:
for (i = 0; i < gdbarch_num_regs (frame_arch); i++)
if (priv_data->registers[i] && priv_data->registers[i]->free)
priv_data->registers[i]->free (priv_data->registers[i]);
and the problem is these gdb_reg_value instances have been returned
by the JIT reader that has been already unloaded, and their "free"
function pointers likely point to functions in the DSO that has
already been unloaded...
A fix for that could be to call reinit_frame_cache in
jit_reader_unload_command _before_ unloading the jit reader DSO so
that the jit reader is given a chance to clean up the gdb_reg_values
before it is unloaded. However, the fix for the point below makes
this unnecessary, because it stops jit.c from keeping around
gdb_reg_values in the first place.
- However, it still makes sense to clear the frame cache when loading
or unloading a JIT unwinder.
This makes testing a JIT unwinder a bit simpler.
- Not only the frame cache actually -- gdb is not unloading the
jit-registered objfiles when the JIT reader is unloaded, and not
loading the already-registered descriptors when a JIT reader is
loaded.
The new test exercises unloading the jit reader, loading it back
again, and then making sure the JIT reader's unwinder works again.
Without the unload/re-load of already-read descriptors, the newly
loaded JIT would have no idea where the new function is, because
it's stored at symbol read time.
- I added a couple "info frame" calls to the test, and that
crashes GDB...
The problem is that jit_frame_prev_register assumes it'll only be
called for raw registers, so when it gets a pseudo register number,
the "priv->registers[reg]" access is really an out-of-bounds access.
To fix that, I made jit_frame_prev_register use
gdbarch_pseudo_register_read_value for reading the pseudo-registers.
However, that works with a regcache and we don't have one. To fix
that, I made the JIT unwinder store a regcache in its cache instead
of an array of gdb_reg_value pointers.
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* jit.c (jit_reader_load_command): Call reinit_frame_cache and
jit_inferior_created_hook.
(jit_reader_unload_command): Call reinit_frame_cache and
jit_inferior_exit_hook.
* jit.c (struct jit_unwind_private) <registers>: Delete field.
<regcache>: New field.
(jit_unwind_reg_set_impl): Set the register's value in the
regcache. Free the passed-in gdb_reg_value.
(jit_dealloc_cache): Adjust to free the regcache.
(jit_frame_sniffer): Allocate a regcache instead of an array of
gdb_reg_value pointers.
(jit_frame_this_id): Adjust.
(jit_frame_prev_register): Read raw registers off of the regcache
instead of from the gdb_reg_value pointer array. Use
gdbarch_pseudo_register_read_value to read pseudo registers.
* regcache.c (regcache_raw_set_cached_value): New function,
factored out from ...
(regcache_raw_write): ... here.
* regcache.h (regcache_raw_set_cached_value): Declare.
gdb/testsuite/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
* gdb.base/jit-reader.exp (info_registers_current_frame): New
procedure.
(jit_reader_test): Test the jit reader's unwinder.
* gdb.base/jithost.c (jit_function_00_code): New global.
(main): Use memcpy to fill in the mmapped code, instead of poking
bytes manually here.
* gdb.base/jitreader.c (enum register_mapping) <AMD64_RBP>: New
value.
(read_debug_info): Save the function's range.
(read_sp): New function.
(unwind_frame): Use it. Also unwind RBP.
(get_frame_id): Use read_sp.
(gdb_init_reader): Use calloc instead of malloc.
* lib/gdb.exp (get_hexadecimal_valueof): Add optional 'test'
parameter. Use gdb_test_multiple.
|
|
Ref: https://sourceware.org/ml/gdb/2016-03/msg00023.html
GDB currently fails to fetch the list of already-registered JIT
modules on attach.
Nothing is calling jit_inferior_init, which is what is responsible for
walking the JIT object list at init time.
Despite the misleading naming, jit_inferior_created_hook ->
jit_inferior_init is only called when the inferior execs.
This regressed with the fix for PR gdb/13431 (03bef283c2d3):
https://sourceware.org/ml/gdb-patches/2012-02/msg00023.html which
removed the inferior_created (jit_inferior_created_observer)
observer.
Adding an inferior_created observer back fixes the issue.
In turn, this exposes a bug in jit_breakpoint_re_set_internal as well,
which is returning the wrong result when we already have the
breakpoint at the right address.
gdb/ChangeLog:
2016-03-31 Yichao Yu <yyc1992@gmail.com>
PR gdb/19858
* jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
got the breakpoint at the right address.
(jit_inferior_created): New function.
(_initialize_jit): Install jit_inferior_created as
inferior_created observer.
Signed-off-by: Pedro Alves <palves@redhat.com>
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
We could change the signature of the function. However, it would
require changing gdb_target_read in jit-reader.h, which is an exported
interface. It's probably better to just add a cast in our code than to
break other people's code.
gdb/ChangeLog:
* jit.c (jit_target_read_impl): Add cast.
|
|
gdb/ChangeLog:
* jit.c (jit_reader_load): Add cast.
|
|
There are a bunch of places where a void* is implicitely casted into a
gdb_byte*. The auto-insert-casts script added explicit casts at those
places. However, in many cases, it makes more sense to just change the
void* to a gdb_byte*.
gdb/ChangeLog:
* aarch64-tdep.c (stack_item_t): Change type of data to gdb_byte*.
* arm-tdep.c (struct stack_item): Likewise.
(push_stack_item): Add gdb_byte* cast.
* avr-tdep.c (struct stack_item): Change type of data to gdb_byte*.
(push_stack_item): Add gdb_byte* cast.
* cli/cli-dump.c (dump_memory_to_file): Change type of buf to gdb_byte*
and add cast.
* cris-tdep.c (struct stack_item): Change type of data to gdb_byte*.
(push_stack_item): Add gdb_byte* cast.
* gcore.c (gcore_copy_callback): Change type of memhunk to gdb_byte* and
add cast.
* gdbtypes.h (print_scalar_formatted): Change type of first parameter to
gdb_byte*.
* h8300-tdep.c (h8300_extract_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(h8300h_extract_return_value): Likewise.
(h8300_store_return_value): Change type of valbuf to gdb_byte*.
(h8300h_store_return_value): Likewise.
* iq2000-tdep.c (iq2000_extract_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
* jit.c (jit_reader_try_read_symtab): Change type of gdb_mem to gdb_byte*
and add cast.
* m32r-tdep.c (m32r_store_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(m32r_extract_return_value): Change type of dst to gdb_byte* and remove
valbuf.
* mep-tdep.c (mep_pseudo_cr32_read): Change type of buf to gdb_byte*.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_csr_write): Likewise.
(mep_pseudo_cr32_write): Likewise.
(mep_pseudo_cr64_write): Likewise.
* mi/mi-main.c (mi_cmd_data_write_memory): Change type of buffer to
gdb_byte* and add cast.
* moxie-tdep.c (moxie_store_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(moxie_extract_return_value): Change type of dst to gdb_byte* and remove
valbuf.
* p-valprint.c (print_scalar_formatted): Change type of valaddr to
gdb_byte*.
* printcmd.c (void): Likewise.
* python/py-inferior.c (infpy_read_memory): Change type of buffer to
gdb_byte* and add cast.
(infpy_write_memory): Likewise.
(infpy_search_memory): Likewise.
* regcache.c (regcache_raw_write_signed): Change type of buf to gdb_byte*
and add cast.
(regcache_raw_write_unsigned): Likewise.
(regcache_cooked_write_signed): Likewise.
(regcache_cooked_write_unsigned): Likewise.
* sh64-tdep.c (h64_extract_return_value): Change type of valbuf to
gdb_byte*.
|
|
Note: I needed to split this patch in two, otherwise it's too big for
the mailing list.
This patch adds explicit casts to situations where a void pointer is
assigned to a pointer to the "real" type. Building in C++ mode requires
those assignments to use an explicit cast. This includes, for example:
- callback arguments (cleanups, comparison functions, ...)
- data attached to some object (objfile, program space, etc) in the form
of a void pointer
- "user data" passed to some function
This patch comes from the commit "(mostly) auto-generated patch to insert
casts needed for C++", taken from Pedro's C++ branch.
Only files built on x86 with --enable-targets=all are modified, so the
native files for other arches will need to be dealt with separately.
I built-tested this with --enable-targets=all and reg-tested. To my
surprise, a test case (selftest.exp) had to be adjusted.
Here's the ChangeLog entry. Again, this was relatively quick to make
despite the length, thanks to David Malcom's script, although I don't
believe it's very useful information in that particular case...
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_make_prologue_cache): Add cast(s).
(aarch64_make_stub_cache): Likewise.
(value_of_aarch64_user_reg): Likewise.
* ada-lang.c (ada_inferior_data_cleanup): Likewise.
(get_ada_inferior_data): Likewise.
(get_ada_pspace_data): Likewise.
(ada_pspace_data_cleanup): Likewise.
(ada_complete_symbol_matcher): Likewise.
(ada_exc_search_name_matches): Likewise.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* addrmap.c (addrmap_mutable_foreach_worker): Likewise.
(splay_obstack_alloc): Likewise.
(splay_obstack_free): Likewise.
* alpha-linux-tdep.c (alpha_linux_supply_gregset): Likewise.
(alpha_linux_collect_gregset): Likewise.
(alpha_linux_supply_fpregset): Likewise.
(alpha_linux_collect_fpregset): Likewise.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise.
* alpha-tdep.c (alpha_lds): Likewise.
(alpha_sts): Likewise.
(alpha_sigtramp_frame_unwind_cache): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_supply_int_regs): Likewise.
(alpha_fill_int_regs): Likewise.
(alpha_supply_fp_regs): Likewise.
(alpha_fill_fp_regs): Likewise.
* alphanbsd-tdep.c (alphanbsd_supply_fpregset): Likewise.
(alphanbsd_aout_supply_gregset): Likewise.
(alphanbsd_supply_gregset): Likewise.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
(amd64_x32_linux_init_abi): Likewise.
* amd64-nat.c (amd64_supply_native_gregset): Likewise.
(amd64_collect_native_gregset): Likewise.
* amd64-tdep.c (amd64_frame_cache): Likewise.
(amd64_sigtramp_frame_cache): Likewise.
(amd64_epilogue_frame_cache): Likewise.
(amd64_supply_fxsave): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_fxsave): Likewise.
(amd64_collect_xsave): Likewise.
* amd64-windows-tdep.c (amd64_windows_frame_cache): Likewise.
* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
(arm_linux_collect_gregset): Likewise.
(arm_linux_supply_nwfpe): Likewise.
(arm_linux_collect_nwfpe): Likewise.
(arm_linux_supply_vfp): Likewise.
(arm_linux_collect_vfp): Likewise.
* arm-tdep.c (arm_find_mapping_symbol): Likewise.
(arm_prologue_unwind_stop_reason): Likewise.
(arm_prologue_this_id): Likewise.
(arm_prologue_prev_register): Likewise.
(arm_exidx_data_free): Likewise.
(arm_find_exidx_entry): Likewise.
(arm_stub_this_id): Likewise.
(arm_m_exception_this_id): Likewise.
(arm_m_exception_prev_register): Likewise.
(arm_normal_frame_base): Likewise.
(gdb_print_insn_arm): Likewise.
(arm_objfile_data_free): Likewise.
(arm_record_special_symbol): Likewise.
(value_of_arm_user_reg): Likewise.
* armbsd-tdep.c (armbsd_supply_fpregset): Likewise.
(armbsd_supply_gregset): Likewise.
* auto-load.c (auto_load_pspace_data_cleanup): Likewise.
(get_auto_load_pspace_data): Likewise.
(hash_loaded_script_entry): Likewise.
(eq_loaded_script_entry): Likewise.
(clear_section_scripts): Likewise.
(collect_matching_scripts): Likewise.
* auxv.c (auxv_inferior_data_cleanup): Likewise.
(get_auxv_inferior_data): Likewise.
* avr-tdep.c (avr_frame_unwind_cache): Likewise.
* ax-general.c (do_free_agent_expr_cleanup): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
(target_bfd_xclose): Likewise.
(target_bfd_get_section_table): Likewise.
* bfin-tdep.c (bfin_frame_cache): Likewise.
* block.c (find_block_in_blockvector): Likewise.
(call_site_for_pc): Likewise.
(block_find_non_opaque_type_preferred): Likewise.
* break-catch-sig.c (signal_catchpoint_insert_location): Likewise.
(signal_catchpoint_remove_location): Likewise.
(signal_catchpoint_breakpoint_hit): Likewise.
(signal_catchpoint_print_one): Likewise.
(signal_catchpoint_print_mention): Likewise.
(signal_catchpoint_print_recreate): Likewise.
* break-catch-syscall.c (get_catch_syscall_inferior_data): Likewise.
* breakpoint.c (do_cleanup_counted_command_line): Likewise.
(bp_location_compare_addrs): Likewise.
(get_first_locp_gte_addr): Likewise.
(check_tracepoint_command): Likewise.
(do_map_commands_command): Likewise.
(get_breakpoint_objfile_data): Likewise.
(free_breakpoint_probes): Likewise.
(do_captured_breakpoint_query): Likewise.
(compare_breakpoints): Likewise.
(bp_location_compare): Likewise.
(bpstat_remove_breakpoint_callback): Likewise.
(do_delete_breakpoint_cleanup): Likewise.
* bsd-uthread.c (bsd_uthread_set_supply_uthread): Likewise.
(bsd_uthread_set_collect_uthread): Likewise.
(bsd_uthread_activate): Likewise.
(bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* btrace.c (check_xml_btrace_version): Likewise.
(parse_xml_btrace_block): Likewise.
(parse_xml_btrace_pt_config_cpu): Likewise.
(parse_xml_btrace_pt_raw): Likewise.
(parse_xml_btrace_pt): Likewise.
(parse_xml_btrace_conf_bts): Likewise.
(parse_xml_btrace_conf_pt): Likewise.
(do_btrace_data_cleanup): Likewise.
* c-typeprint.c (find_typedef_for_canonicalize): Likewise.
* charset.c (cleanup_iconv): Likewise.
(do_cleanup_iterator): Likewise.
* cli-out.c (cli_uiout_dtor): Likewise.
(cli_table_begin): Likewise.
(cli_table_body): Likewise.
(cli_table_end): Likewise.
(cli_table_header): Likewise.
(cli_begin): Likewise.
(cli_end): Likewise.
(cli_field_int): Likewise.
(cli_field_skip): Likewise.
(cli_field_string): Likewise.
(cli_field_fmt): Likewise.
(cli_spaces): Likewise.
(cli_text): Likewise.
(cli_message): Likewise.
(cli_wrap_hint): Likewise.
(cli_flush): Likewise.
(cli_redirect): Likewise.
(out_field_fmt): Likewise.
(field_separator): Likewise.
(cli_out_set_stream): Likewise.
* cli/cli-cmds.c (compare_symtabs): Likewise.
* cli/cli-dump.c (call_dump_func): Likewise.
(restore_section_callback): Likewise.
* cli/cli-script.c (clear_hook_in_cleanup): Likewise.
(do_restore_user_call_depth): Likewise.
(do_free_command_lines_cleanup): Likewise.
* coff-pe-read.c (get_section_vmas): Likewise.
(pe_as16): Likewise.
(pe_as32): Likewise.
* coffread.c (coff_symfile_read): Likewise.
* common/agent.c (agent_look_up_symbols): Likewise.
* common/filestuff.c (do_close_cleanup): Likewise.
* common/format.c (free_format_pieces_cleanup): Likewise.
* common/vec.c (vec_o_reserve): Likewise.
* compile/compile-c-support.c (print_one_macro): Likewise.
* compile/compile-c-symbols.c (hash_symbol_error): Likewise.
(eq_symbol_error): Likewise.
(del_symbol_error): Likewise.
(error_symbol_once): Likewise.
(gcc_convert_symbol): Likewise.
(gcc_symbol_address): Likewise.
(hash_symname): Likewise.
(eq_symname): Likewise.
* compile/compile-c-types.c (hash_type_map_instance): Likewise.
(eq_type_map_instance): Likewise.
(insert_type): Likewise.
(convert_type): Likewise.
* compile/compile-object-load.c (munmap_listp_free_cleanup): Likewise.
(setup_sections): Likewise.
(link_hash_table_free): Likewise.
(copy_sections): Likewise.
* compile/compile-object-run.c (do_module_cleanup): Likewise.
* compile/compile.c (compile_print_value): Likewise.
(do_rmdir): Likewise.
(cleanup_compile_instance): Likewise.
(cleanup_unlink_file): Likewise.
* completer.c (free_completion_tracker): Likewise.
* corelow.c (add_to_spuid_list): Likewise.
* cp-namespace.c (reset_directive_searched): Likewise.
* cp-support.c (reset_directive_searched): Likewise.
* cris-tdep.c (cris_sigtramp_frame_unwind_cache): Likewise.
(cris_frame_unwind_cache): Likewise.
* d-lang.c (builtin_d_type): Likewise.
* d-namespace.c (reset_directive_searched): Likewise.
* dbxread.c (dbx_free_symfile_info): Likewise.
(do_free_bincl_list_cleanup): Likewise.
* disasm.c (hash_dis_line_entry): Likewise.
(eq_dis_line_entry): Likewise.
(dis_asm_print_address): Likewise.
(fprintf_disasm): Likewise.
(do_ui_file_delete): Likewise.
* doublest.c (convert_floatformat_to_doublest): Likewise.
* dummy-frame.c (pop_dummy_frame_bpt): Likewise.
(dummy_frame_prev_register): Likewise.
(dummy_frame_this_id): Likewise.
* dwarf2-frame-tailcall.c (cache_hash): Likewise.
(cache_eq): Likewise.
(cache_find): Likewise.
(tailcall_frame_this_id): Likewise.
(dwarf2_tailcall_prev_register_first): Likewise.
(tailcall_frame_prev_register): Likewise.
(tailcall_frame_dealloc_cache): Likewise.
(tailcall_frame_prev_arch): Likewise.
* dwarf2-frame.c (dwarf2_frame_state_free): Likewise.
(dwarf2_frame_set_init_reg): Likewise.
(dwarf2_frame_init_reg): Likewise.
(dwarf2_frame_set_signal_frame_p): Likewise.
(dwarf2_frame_signal_frame_p): Likewise.
(dwarf2_frame_set_adjust_regnum): Likewise.
(dwarf2_frame_adjust_regnum): Likewise.
(clear_pointer_cleanup): Likewise.
(dwarf2_frame_cache): Likewise.
(find_cie): Likewise.
(dwarf2_frame_find_fde): Likewise.
* dwarf2expr.c (dwarf_expr_address_type): Likewise.
(free_dwarf_expr_context_cleanup): Likewise.
* dwarf2loc.c (locexpr_find_frame_base_location): Likewise.
(locexpr_get_frame_base): Likewise.
(loclist_find_frame_base_location): Likewise.
(loclist_get_frame_base): Likewise.
(dwarf_expr_dwarf_call): Likewise.
(dwarf_expr_get_base_type): Likewise.
(dwarf_expr_push_dwarf_reg_entry_value): Likewise.
(dwarf_expr_get_obj_addr): Likewise.
(entry_data_value_coerce_ref): Likewise.
(entry_data_value_copy_closure): Likewise.
(entry_data_value_free_closure): Likewise.
(get_frame_address_in_block_wrapper): Likewise.
(dwarf2_evaluate_property): Likewise.
(dwarf2_compile_property_to_c): Likewise.
(needs_frame_read_addr_from_reg): Likewise.
(needs_frame_get_reg_value): Likewise.
(needs_frame_frame_base): Likewise.
(needs_frame_frame_cfa): Likewise.
(needs_frame_tls_address): Likewise.
(needs_frame_dwarf_call): Likewise.
(needs_dwarf_reg_entry_value): Likewise.
(get_ax_pc): Likewise.
(locexpr_read_variable): Likewise.
(locexpr_read_variable_at_entry): Likewise.
(locexpr_read_needs_frame): Likewise.
(locexpr_describe_location): Likewise.
(locexpr_tracepoint_var_ref): Likewise.
(locexpr_generate_c_location): Likewise.
(loclist_read_variable): Likewise.
(loclist_read_variable_at_entry): Likewise.
(loclist_describe_location): Likewise.
(loclist_tracepoint_var_ref): Likewise.
(loclist_generate_c_location): Likewise.
* dwarf2read.c (line_header_hash_voidp): Likewise.
(line_header_eq_voidp): Likewise.
(dwarf2_has_info): Likewise.
(dwarf2_get_section_info): Likewise.
(locate_dwz_sections): Likewise.
(hash_file_name_entry): Likewise.
(eq_file_name_entry): Likewise.
(delete_file_name_entry): Likewise.
(dw2_setup): Likewise.
(dw2_get_file_names_reader): Likewise.
(dw2_find_pc_sect_compunit_symtab): Likewise.
(hash_signatured_type): Likewise.
(eq_signatured_type): Likewise.
(add_signatured_type_cu_to_table): Likewise.
(create_debug_types_hash_table): Likewise.
(lookup_dwo_signatured_type): Likewise.
(lookup_dwp_signatured_type): Likewise.
(lookup_signatured_type): Likewise.
(hash_type_unit_group): Likewise.
(eq_type_unit_group): Likewise.
(get_type_unit_group): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(sort_tu_by_abbrev_offset): Likewise.
(process_skeletonless_type_unit): Likewise.
(psymtabs_addrmap_cleanup): Likewise.
(dwarf2_read_symtab): Likewise.
(psymtab_to_symtab_1): Likewise.
(die_hash): Likewise.
(die_eq): Likewise.
(load_full_comp_unit_reader): Likewise.
(reset_die_in_process): Likewise.
(free_cu_line_header): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(hash_dwo_file): Likewise.
(eq_dwo_file): Likewise.
(hash_dwo_unit): Likewise.
(eq_dwo_unit): Likewise.
(create_dwo_cu_reader): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_unit_in_dwp): Likewise.
(dwarf2_locate_dwo_sections): Likewise.
(dwarf2_locate_common_dwp_sections): Likewise.
(dwarf2_locate_v2_dwp_sections): Likewise.
(hash_dwp_loaded_cutus): Likewise.
(eq_dwp_loaded_cutus): Likewise.
(lookup_dwo_cutu): Likewise.
(abbrev_table_free_cleanup): Likewise.
(dwarf2_free_abbrev_table): Likewise.
(find_partial_die_in_comp_unit): Likewise.
(free_line_header_voidp): Likewise.
(follow_die_offset): Likewise.
(follow_die_sig_1): Likewise.
(free_heap_comp_unit): Likewise.
(free_stack_comp_unit): Likewise.
(dwarf2_free_objfile): Likewise.
(per_cu_offset_and_type_hash): Likewise.
(per_cu_offset_and_type_eq): Likewise.
(get_die_type_at_offset): Likewise.
(partial_die_hash): Likewise.
(partial_die_eq): Likewise.
(dwarf2_per_objfile_free): Likewise.
(hash_strtab_entry): Likewise.
(eq_strtab_entry): Likewise.
(add_string): Likewise.
(hash_symtab_entry): Likewise.
(eq_symtab_entry): Likewise.
(delete_symtab_entry): Likewise.
(cleanup_mapped_symtab): Likewise.
(add_indices_to_cpool): Likewise.
(hash_psymtab_cu_index): Likewise.
(eq_psymtab_cu_index): Likewise.
(add_address_entry_worker): Likewise.
(unlink_if_set): Likewise.
(write_one_signatured_type): Likewise.
(save_gdb_index_command): Likewise.
* elfread.c (elf_symtab_read): Likewise.
(elf_gnu_ifunc_cache_hash): Likewise.
(elf_gnu_ifunc_cache_eq): Likewise.
(elf_gnu_ifunc_record_cache): Likewise.
(elf_gnu_ifunc_resolve_by_cache): Likewise.
(elf_get_probes): Likewise.
(probe_key_free): Likewise.
* f-lang.c (builtin_f_type): Likewise.
* frame-base.c (frame_base_append_sniffer): Likewise.
(frame_base_set_default): Likewise.
(frame_base_find_by_frame): Likewise.
* frame-unwind.c (frame_unwind_prepend_unwinder): Likewise.
(frame_unwind_append_unwinder): Likewise.
(frame_unwind_find_by_frame): Likewise.
* frame.c (frame_addr_hash): Likewise.
(frame_addr_hash_eq): Likewise.
(frame_stash_find): Likewise.
(do_frame_register_read): Likewise.
(unwind_to_current_frame): Likewise.
(frame_cleanup_after_sniffer): Likewise.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
* frv-tdep.c (frv_frame_unwind_cache): Likewise.
* ft32-tdep.c (ft32_frame_cache): Likewise.
* gcore.c (do_bfd_delete_cleanup): Likewise.
(gcore_create_callback): Likewise.
* gdb_bfd.c (hash_bfd): Likewise.
(eq_bfd): Likewise.
(gdb_bfd_open): Likewise.
(free_one_bfd_section): Likewise.
(gdb_bfd_ref): Likewise.
(gdb_bfd_unref): Likewise.
(get_section_descriptor): Likewise.
(gdb_bfd_map_section): Likewise.
(gdb_bfd_crc): Likewise.
(gdb_bfd_mark_parent): Likewise.
(gdb_bfd_record_inclusion): Likewise.
(gdb_bfd_requires_relocations): Likewise.
(print_one_bfd): Likewise.
* gdbtypes.c (type_pair_hash): Likewise.
(type_pair_eq): Likewise.
(builtin_type): Likewise.
(objfile_type): Likewise.
* gnu-v3-abi.c (vtable_ptrdiff_type): Likewise.
(vtable_address_point_offset): Likewise.
(gnuv3_get_vtable): Likewise.
(hash_value_and_voffset): Likewise.
(eq_value_and_voffset): Likewise.
(compare_value_and_voffset): Likewise.
(compute_vtable_size): Likewise.
(gnuv3_get_typeid_type): Likewise.
* go-lang.c (builtin_go_type): Likewise.
* guile/scm-block.c (bkscm_hash_block_smob): Likewise.
(bkscm_eq_block_smob): Likewise.
(bkscm_objfile_block_map): Likewise.
(bkscm_del_objfile_blocks): Likewise.
* guile/scm-breakpoint.c (bpscm_build_bp_list): Likewise.
* guile/scm-disasm.c (gdbscm_disasm_read_memory_worker): Likewise.
(gdbscm_disasm_print_address): Likewise.
* guile/scm-frame.c (frscm_hash_frame_smob): Likewise.
(frscm_eq_frame_smob): Likewise.
(frscm_inferior_frame_map): Likewise.
(frscm_del_inferior_frames): Likewise.
* guile/scm-gsmob.c (gdbscm_add_objfile_ref): Likewise.
* guile/scm-objfile.c (ofscm_handle_objfile_deleted): Likewise.
(ofscm_objfile_smob_from_objfile): Likewise.
* guile/scm-ports.c (ioscm_write): Likewise.
(ioscm_file_port_delete): Likewise.
(ioscm_file_port_rewind): Likewise.
(ioscm_file_port_put): Likewise.
(ioscm_file_port_write): Likewise.
* guile/scm-progspace.c (psscm_handle_pspace_deleted): Likewise.
(psscm_pspace_smob_from_pspace): Likewise.
* guile/scm-safe-call.c (scscm_recording_pre_unwind_handler): Likewise.
(scscm_recording_unwind_handler): Likewise.
(gdbscm_with_catch): Likewise.
(scscm_call_0_body): Likewise.
(scscm_call_1_body): Likewise.
(scscm_call_2_body): Likewise.
(scscm_call_3_body): Likewise.
(scscm_call_4_body): Likewise.
(scscm_apply_1_body): Likewise.
(scscm_eval_scheme_string): Likewise.
(gdbscm_safe_eval_string): Likewise.
(scscm_source_scheme_script): Likewise.
(gdbscm_safe_source_script): Likewise.
* guile/scm-string.c (gdbscm_call_scm_to_stringn): Likewise.
(gdbscm_call_scm_from_stringn): Likewise.
* guile/scm-symbol.c (syscm_hash_symbol_smob): Likewise.
(syscm_eq_symbol_smob): Likewise.
(syscm_get_symbol_map): Likewise.
(syscm_del_objfile_symbols): Likewise.
* guile/scm-symtab.c (stscm_hash_symtab_smob): Likewise.
(stscm_eq_symtab_smob): Likewise.
(stscm_objfile_symtab_map): Likewise.
(stscm_del_objfile_symtabs): Likewise.
* guile/scm-type.c (tyscm_hash_type_smob): Likewise.
(tyscm_eq_type_smob): Likewise.
(tyscm_type_map): Likewise.
(tyscm_copy_type_recursive): Likewise.
(save_objfile_types): Likewise.
* guile/scm-utils.c (extract_arg): Likewise.
* h8300-tdep.c (h8300_frame_cache): Likewise.
* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind_cache): Likewise.
* hppa-tdep.c (compare_unwind_entries): Likewise.
(find_unwind_entry): Likewise.
(hppa_frame_cache): Likewise.
(hppa_stub_frame_unwind_cache): Likewise.
* hppanbsd-tdep.c (hppanbsd_supply_gregset): Likewise.
* hppaobsd-tdep.c (hppaobsd_supply_gregset): Likewise.
(hppaobsd_supply_fpregset): Likewise.
* i386-cygwin-tdep.c (core_process_module_section): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_frame_cache): Likewise.
(i386_epilogue_frame_cache): Likewise.
(i386_sigtramp_frame_cache): Likewise.
(i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_gdbarch_init): Likewise.
* i386obsd-tdep.c (i386obsd_aout_supply_regset): Likewise.
(i386obsd_trapframe_cache): Likewise.
* i387-tdep.c (i387_supply_fsave): Likewise.
(i387_collect_fsave): Likewise.
(i387_supply_fxsave): Likewise.
(i387_collect_fxsave): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* ia64-tdep.c (ia64_frame_cache): Likewise.
(ia64_sigtramp_frame_cache): Likewise.
* infcmd.c (attach_command_continuation): Likewise.
(attach_command_continuation_free_args): Likewise.
* inferior.c (restore_inferior): Likewise.
(delete_thread_of_inferior): Likewise.
* inflow.c (inflow_inferior_data_cleanup): Likewise.
(get_inflow_inferior_data): Likewise.
(inflow_inferior_exit): Likewise.
* infrun.c (displaced_step_clear_cleanup): Likewise.
(restore_current_uiout_cleanup): Likewise.
(release_stop_context_cleanup): Likewise.
(do_restore_infcall_suspend_state_cleanup): Likewise.
(do_restore_infcall_control_state_cleanup): Likewise.
(restore_inferior_ptid): Likewise.
* inline-frame.c (block_starting_point_at): Likewise.
* iq2000-tdep.c (iq2000_frame_cache): Likewise.
* jit.c (get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_close_impl): Likewise.
(jit_find_objf_with_entry_addr): Likewise.
(jit_breakpoint_deleted): Likewise.
(jit_unwind_reg_set_impl): Likewise.
(jit_unwind_reg_get_impl): Likewise.
(jit_dealloc_cache): Likewise.
(jit_frame_sniffer): Likewise.
(jit_frame_prev_register): Likewise.
(jit_prepend_unwinder): Likewise.
(jit_inferior_exit_hook): Likewise.
(free_objfile_data): Likewise.
* jv-lang.c (jv_per_objfile_free): Likewise.
(get_dynamics_objfile): Likewise.
(get_java_class_symtab): Likewise.
(builtin_java_type): Likewise.
* language.c (language_string_char_type): Likewise.
(language_bool_type): Likewise.
(language_lookup_primitive_type): Likewise.
(language_lookup_primitive_type_as_symbol): Likewise.
* linespec.c (hash_address_entry): Likewise.
(eq_address_entry): Likewise.
(iterate_inline_only): Likewise.
(iterate_name_matcher): Likewise.
(decode_line_2_compare_items): Likewise.
(collect_one_symbol): Likewise.
(compare_symbols): Likewise.
(compare_msymbols): Likewise.
(add_symtabs_to_list): Likewise.
(collect_symbols): Likewise.
(compare_msyms): Likewise.
(add_minsym): Likewise.
(cleanup_linespec_result): Likewise.
* linux-fork.c (inferior_call_waitpid_cleanup): Likewise.
* linux-nat.c (delete_lwp_cleanup): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(resume_stopped_resumed_lwps): Likewise.
* linux-tdep.c (get_linux_gdbarch_data): Likewise.
(invalidate_linux_cache_inf): Likewise.
(get_linux_inferior_data): Likewise.
(linux_find_memory_regions_thunk): Likewise.
(linux_make_mappings_callback): Likewise.
(linux_corefile_thread_callback): Likewise.
(find_mapping_size): Likewise.
* linux-thread-db.c (find_new_threads_callback): Likewise.
* lm32-tdep.c (lm32_frame_cache): Likewise.
* m2-lang.c (builtin_m2_type): Likewise.
* m32c-tdep.c (m32c_analyze_frame_prologue): Likewise.
* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_cache): Likewise.
(m32r_linux_supply_gregset): Likewise.
(m32r_linux_collect_gregset): Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
* m68k-tdep.c (m68k_frame_cache): Likewise.
* m68kbsd-tdep.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_supply_gregset): Likewise.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* m88k-tdep.c (m88k_frame_cache): Likewise.
(m88k_supply_gregset): Likewise.
gdb/gdbserver/ChangeLog:
* dll.c (match_dll): Add cast(s).
(unloaded_dll): Likewise.
* linux-low.c (second_thread_of_pid_p): Likewise.
(delete_lwp_callback): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(linux_set_resume_request): Likewise.
* server.c (accumulate_file_name_length): Likewise.
(emit_dll_description): Likewise.
(handle_qxfer_threads_worker): Likewise.
(visit_actioned_threads): Likewise.
* thread-db.c (any_thread_of): Likewise.
* tracepoint.c (same_process_p): Likewise.
(match_blocktype): Likewise.
(build_traceframe_info_xml): Likewise.
gdb/testsuite/ChangeLog:
* gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected
source line.
|
|
Most allocation functions (if not all) return a void* pointing to the
allocated memory. In C++, we need to add an explicit cast when
assigning the result to a pointer to another type (which is the case
more often than not).
The content of this patch is taken from Pedro's branch, from commit
"(mostly) auto-generated patch to insert casts needed for C++". I
validated that the changes make sense and manually reflowed the code to
make it respect the coding style. I also found multiple places where I
could use XNEW/XNEWVEC/XRESIZEVEC/etc.
Thanks a lot to whoever did that automated script to insert casts, doing
it completely by hand would have taken a ridiculous amount of time.
Only files built on x86 with --enable-targets=all are modified. This
means that all other -nat.c files are untouched and will have to be
dealt with later by using appropiate compilers. Or maybe we can try to
build them with a regular g++ just to know where to add casts, I don't
know.
I built-tested this with --enable-targets=all and reg-tested.
Here's the changelog entry, which was not too bad to make despite the
size, thanks to David Malcom's script. I fixed some bits by hand, but
there might be some wrong parts left (hopefully not).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast
to allocation result assignment.
* ada-exp.y (write_object_renaming): Likewise.
(write_ambiguous_var): Likewise.
(ada_nget_field_index): Likewise.
(write_var_or_type): Likewise.
* ada-lang.c (ada_decode_symbol): Likewise.
(ada_value_assign): Likewise.
(value_pointer): Likewise.
(cache_symbol): Likewise.
(add_nonlocal_symbols): Likewise.
(ada_name_for_lookup): Likewise.
(symbol_completion_add): Likewise.
(ada_to_fixed_type_1): Likewise.
(ada_get_next_arg): Likewise.
(defns_collected): Likewise.
* ada-lex.l (processId): Likewise.
(processString): Likewise.
* ada-tasks.c (read_known_tasks_array): Likewise.
(read_known_tasks_list): Likewise.
* ada-typeprint.c (decoded_type_name): Likewise.
* addrmap.c (addrmap_mutable_create_fixed): Likewise.
* amd64-tdep.c (amd64_push_arguments): Likewise.
(amd64_displaced_step_copy_insn): Likewise.
(amd64_classify_insn_at): Likewise.
(amd64_relocate_instruction): Likewise.
* amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise.
* arch-utils.c (simple_displaced_step_copy_insn): Likewise.
(initialize_current_architecture): Likewise.
* arm-linux-tdep.c (arm_stap_parse_special_token): Likewise.
* arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise.
* arm-tdep.c (arm_exidx_new_objfile): Likewise.
(arm_push_dummy_call): Likewise.
(extend_buffer_earlier): Likewise.
(arm_adjust_breakpoint_address): Likewise.
(arm_skip_stub): Likewise.
* auto-load.c (filename_is_in_pattern): Likewise.
(maybe_add_script_file): Likewise.
(maybe_add_script_text): Likewise.
(auto_load_objfile_script_1): Likewise.
* auxv.c (ld_so_xfer_auxv): Likewise.
* ax-general.c (new_agent_expr): Likewise.
(grow_expr): Likewise.
(ax_reg_mask): Likewise.
* bcache.c (bcache_full): Likewise.
* breakpoint.c (program_breakpoint_here_p): Likewise.
* btrace.c (parse_xml_raw): Likewise.
* build-id.c (build_id_to_debug_bfd): Likewise.
* buildsym.c (end_symtab_with_blockvector): Likewise.
* c-exp.y (string_exp): Likewise.
(qualified_name): Likewise.
(write_destructor_name): Likewise.
(operator_stoken): Likewise.
(parse_number): Likewise.
(scan_macro_expansion): Likewise.
(yylex): Likewise.
(c_print_token): Likewise.
* c-lang.c (c_get_string): Likewise.
(emit_numeric_character): Likewise.
* charset.c (wchar_iterate): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
(make_command): Likewise.
* cli/cli-dump.c (restore_section_callback): Likewise.
(restore_binary_file): Likewise.
* cli/cli-interp.c (cli_interpreter_exec): Likewise.
* cli/cli-script.c (execute_control_command): Likewise.
* cli/cli-setshow.c (do_set_command): Likewise.
* coff-pe-read.c (add_pe_forwarded_sym): Likewise.
(read_pe_exported_syms): Likewise.
* coffread.c (coff_read_struct_type): Likewise.
(coff_read_enum_type): Likewise.
* common/btrace-common.c (btrace_data_append): Likewise.
* common/buffer.c (buffer_grow): Likewise.
* common/filestuff.c (gdb_fopen_cloexec): Likewise.
* common/format.c (parse_format_string): Likewise.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise.
* common/xml-utils.c (xml_escape_text): Likewise.
* compile/compile-object-load.c (copy_sections): Likewise.
(compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* completer.c (filename_completer): Likewise.
* corefile.c (read_memory_typed_address): Likewise.
(write_memory_unsigned_integer): Likewise.
(write_memory_signed_integer): Likewise.
(complete_set_gnutarget): Likewise.
* corelow.c (get_core_register_section): Likewise.
* cp-name-parser.y (d_grab): Likewise.
(allocate_info): Likewise.
(cp_new_demangle_parse_info): Likewise.
* cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise.
(cp_lookup_symbol_in_namespace): Likewise.
(lookup_namespace_scope): Likewise.
(find_symbol_in_baseclass): Likewise.
(cp_lookup_nested_symbol): Likewise.
(cp_lookup_transparent_type_loop): Likewise.
* cp-support.c (copy_string_to_obstack): Likewise.
(make_symbol_overload_list): Likewise.
(make_symbol_overload_list_namespace): Likewise.
(make_symbol_overload_list_adl_namespace): Likewise.
(first_component_command): Likewise.
* cp-valprint.c (cp_print_value): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* d-exp.y (StringExp): Likewise.
* d-namespace.c (d_lookup_symbol_in_module): Likewise.
(lookup_module_scope): Likewise.
(find_symbol_in_baseclass): Likewise.
(d_lookup_nested_symbol): Likewise.
* dbxread.c (find_stab_function_addr): Likewise.
(read_dbx_symtab): Likewise.
(dbx_end_psymtab): Likewise.
(cp_set_block_scope): Likewise.
* dcache.c (dcache_alloc): Likewise.
* demangle.c (_initialize_demangler): Likewise.
* dicos-tdep.c (dicos_load_module_p): Likewise.
* dictionary.c (dict_create_hashed_expandable): Likewise.
(dict_create_linear_expandable): Likewise.
(expand_hashtable): Likewise.
(add_symbol_linear_expandable): Likewise.
* dwarf2-frame.c (add_cie): Likewise.
(add_fde): Likewise.
(dwarf2_build_frame_info): Likewise.
* dwarf2expr.c (dwarf_expr_grow_stack): Likewise.
(dwarf_expr_fetch_address): Likewise.
(add_piece): Likewise.
(execute_stack_op): Likewise.
* dwarf2loc.c (chain_candidate): Likewise.
(dwarf_entry_parameter_to_value): Likewise.
(read_pieced_value): Likewise.
(write_pieced_value): Likewise.
* dwarf2read.c (dwarf2_read_section): Likewise.
(add_type_unit): Likewise.
(read_comp_units_from_section): Likewise.
(fixup_go_packaging): Likewise.
(dwarf2_compute_name): Likewise.
(dwarf2_physname): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(read_func_scope): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_attach_fields_to_type): Likewise.
(process_structure_scope): Likewise.
(mark_common_block_symbol_computed): Likewise.
(read_common_block): Likewise.
(abbrev_table_read_table): Likewise.
(guess_partial_die_structure_name): Likewise.
(fixup_partial_die): Likewise.
(add_file_name): Likewise.
(dwarf2_const_value_data): Likewise.
(dwarf2_const_value_attr): Likewise.
(build_error_marker_type): Likewise.
(guess_full_die_structure_name): Likewise.
(anonymous_struct_prefix): Likewise.
(typename_concat): Likewise.
(dwarf2_canonicalize_name): Likewise.
(dwarf2_name): Likewise.
(write_constant_as_bytes): Likewise.
(dwarf2_fetch_constant_bytes): Likewise.
(copy_string): Likewise.
(parse_macro_definition): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_rel_plt_read): Likewise.
(elf_gnu_ifunc_resolve_by_cache): Likewise.
(elf_gnu_ifunc_resolve_by_got): Likewise.
(elf_read_minimal_symbols): Likewise.
(elf_gnu_ifunc_record_cache): Likewise.
* event-top.c (top_level_prompt): Likewise.
(command_line_handler): Likewise.
* exec.c (resize_section_table): Likewise.
* expprint.c (print_subexp_standard): Likewise.
* fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise.
* findcmd.c (parse_find_args): Likewise.
* findvar.c (address_from_register): Likewise.
* frame.c (get_prev_frame_always): Likewise.
* gdb_bfd.c (gdb_bfd_ref): Likewise.
(get_section_descriptor): Likewise.
* gdb_obstack.c (obconcat): Likewise.
(obstack_strdup): Likewise.
* gdbtypes.c (lookup_function_type_with_arguments): Likewise.
(create_set_type): Likewise.
(lookup_unsigned_typename): Likewise.
(lookup_signed_typename): Likewise.
(resolve_dynamic_union): Likewise.
(resolve_dynamic_struct): Likewise.
(add_dyn_prop): Likewise.
(copy_dynamic_prop_list): Likewise.
(arch_flags_type): Likewise.
(append_composite_type_field_raw): Likewise.
* gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise.
* gnu-v3-abi.c (gnuv3_rtti_type): Likewise.
* go-exp.y (string_exp): Likewise.
* go-lang.c (go_demangle): Likewise.
* guile/guile.c (compute_scheme_string): Likewise.
* guile/scm-cmd.c (gdbscm_parse_command_name): Likewise.
(gdbscm_canonicalize_command_name): Likewise.
* guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise.
(ioscm_init_memory_port): Likewise.
(ioscm_reinit_memory_port): Likewise.
* guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise.
(gdbscm_gc_dup_argv): Likewise.
* h8300-tdep.c (h8300_push_dummy_call): Likewise.
* hppa-tdep.c (internalize_unwinds): Likewise.
(read_unwind_info): Likewise.
* i386-cygwin-tdep.c (core_process_module_section): Likewise.
(windows_core_xfer_shared_libraries): Likewise.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
(i386_stap_parse_special_token_triplet): Likewise.
(i386_stap_parse_special_token_three_arg_disp): Likewise.
* i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise.
* inf-child.c (inf_child_fileio_readlink): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register): Likewise.
(inf_ptrace_store_register): Likewise.
* infrun.c (follow_exec): Likewise.
(displaced_step_prepare_throw): Likewise.
(save_stop_context): Likewise.
(save_infcall_suspend_state): Likewise.
* jit.c (jit_read_descriptor): Likewise.
(jit_read_code_entry): Likewise.
(jit_symtab_line_mapping_add_impl): Likewise.
(finalize_symtab): Likewise.
(jit_unwind_reg_get_impl): Likewise.
* jv-exp.y (QualifiedName): Likewise.
* jv-lang.c (get_java_utf8_name): Likewise.
(type_from_class): Likewise.
(java_demangle_type_signature): Likewise.
(java_class_name_from_physname): Likewise.
* jv-typeprint.c (java_type_print_base): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* language.c (add_language): Likewise.
* linespec.c (add_sal_to_sals_basic): Likewise.
(add_sal_to_sals): Likewise.
(decode_objc): Likewise.
(find_linespec_symbols): Likewise.
* linux-fork.c (fork_save_infrun_state): Likewise.
* linux-nat.c (linux_nat_detach): Likewise.
(linux_nat_fileio_readlink): Likewise.
* linux-record.c (record_linux_sockaddr): Likewise.
(record_linux_msghdr): Likewise.
(Do): Likewise.
* linux-tdep.c (linux_core_info_proc_mappings): Likewise.
(linux_collect_regset_section_cb): Likewise.
(linux_get_siginfo_data): Likewise.
* linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise.
(try_thread_db_load_from_dir): Likewise.
(thread_db_load_search): Likewise.
(info_auto_load_libthread_db): Likewise.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
(m32c_m16c_pointer_to_address): Likewise.
* m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* machoread.c (macho_check_dsym): Likewise.
* macroexp.c (resize_buffer): Likewise.
(gather_arguments): Likewise.
(maybe_expand): Likewise.
* macrotab.c (new_macro_key): Likewise.
(new_source_file): Likewise.
(new_macro_definition): Likewise.
* mdebugread.c (parse_symbol): Likewise.
(parse_type): Likewise.
(parse_partial_symbols): Likewise.
(psymtab_to_symtab_1): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Likewise.
* mi/mi-cmd-break.c (mi_argv_to_format): Likewise.
* mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_data_write_memory_bytes): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-parse.c (mi_parse_argv): Likewise.
(mi_parse): Likewise.
* minidebug.c (lzma_open): Likewise.
(lzma_pread): Likewise.
* mips-tdep.c (mips_read_fp_register_single): Likewise.
(mips_print_fp_register): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise.
* mipsread.c (read_alphacoff_dynamic_symtab): Likewise.
* mt-tdep.c (mt_register_name): Likewise.
(mt_registers_info): Likewise.
(mt_push_dummy_call): Likewise.
* namespace.c (add_using_directive): Likewise.
* nat/linux-btrace.c (perf_event_read): Likewise.
(linux_enable_bts): Likewise.
* nat/linux-osdata.c (linux_common_core_of_thread): Likewise.
* nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise.
* nto-tdep.c (nto_find_and_open_solib): Likewise.
(nto_parse_redirection): Likewise.
* objc-lang.c (objc_demangle): Likewise.
(find_methods): Likewise.
* objfiles.c (get_objfile_bfd_data): Likewise.
(set_objfile_main_name): Likewise.
(allocate_objfile): Likewise.
(objfile_relocate): Likewise.
(update_section_map): Likewise.
* osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise.
* p-exp.y (exp): Likewise.
(yylex): Likewise.
* p-valprint.c (pascal_object_print_value): Likewise.
* parse.c (initialize_expout): Likewise.
(mark_completion_tag): Likewise.
(copy_name): Likewise.
(parse_float): Likewise.
(type_stack_reserve): Likewise.
* ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise.
(ppu2spu_prev_register): Likewise.
* ppc-ravenscar-thread.c (supply_register_at_address): Likewise.
* printcmd.c (printf_wide_c_string): Likewise.
(printf_pointer): Likewise.
* probe.c (parse_probes): Likewise.
* python/py-cmd.c (gdbpy_parse_command_name): Likewise.
(cmdpy_init): Likewise.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise.
* python/py-symtab.c (set_sal): Likewise.
* python/py-unwind.c (pyuw_sniffer): Likewise.
* python/python.c (python_interactive_command): Likewise.
(compute_python_string): Likewise.
* ravenscar-thread.c (get_running_thread_id): Likewise.
* record-full.c (record_full_exec_insn): Likewise.
(record_full_core_open_1): Likewise.
* regcache.c (regcache_raw_read_signed): Likewise.
(regcache_raw_read_unsigned): Likewise.
(regcache_cooked_read_signed): Likewise.
(regcache_cooked_read_unsigned): Likewise.
* remote-fileio.c (remote_fileio_func_open): Likewise.
(remote_fileio_func_rename): Likewise.
(remote_fileio_func_unlink): Likewise.
(remote_fileio_func_stat): Likewise.
(remote_fileio_func_system): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
(mips_load_srec): Likewise.
(pmon_end_download): Likewise.
* remote.c (new_remote_state): Likewise.
(map_regcache_remote_table): Likewise.
(remote_register_number_and_offset): Likewise.
(init_remote_state): Likewise.
(get_memory_packet_size): Likewise.
(remote_pass_signals): Likewise.
(remote_program_signals): Likewise.
(remote_start_remote): Likewise.
(remote_check_symbols): Likewise.
(remote_query_supported): Likewise.
(extended_remote_attach): Likewise.
(process_g_packet): Likewise.
(store_registers_using_G): Likewise.
(putpkt_binary): Likewise.
(read_frame): Likewise.
(compare_sections_command): Likewise.
(remote_hostio_pread): Likewise.
(remote_hostio_readlink): Likewise.
(remote_file_put): Likewise.
(remote_file_get): Likewise.
(remote_pid_to_exec_file): Likewise.
(_initialize_remote): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise.
(bfd_uses_spe_extensions): Likewise.
* s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise.
* score-tdep.c (score7_malloc_and_get_memblock): Likewise.
* solib-dsbt.c (decode_loadmap): Likewise.
(fetch_loadmap): Likewise.
(scan_dyntag): Likewise.
(enable_break): Likewise.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (fetch_loadmap): Likewise.
(enable_break2): Likewise.
(frv_relocate_main_executable): Likewise.
* solib-spu.c (spu_relocate_main_executable): Likewise.
(spu_bfd_open): Likewise.
* solib-svr4.c (lm_info_read): Likewise.
(read_program_header): Likewise.
(find_program_interpreter): Likewise.
(scan_dyntag): Likewise.
(elf_locate_base): Likewise.
(open_symbol_file_object): Likewise.
(read_program_headers_from_bfd): Likewise.
(svr4_relocate_main_executable): Likewise.
* solib-target.c (solib_target_relocate_section_addresses): Likewise.
* solib.c (solib_find_1): Likewise.
(exec_file_find): Likewise.
(solib_find): Likewise.
* source.c (openp): Likewise.
(print_source_lines_base): Likewise.
(forward_search_command): Likewise.
* sparc-ravenscar-thread.c (supply_register_at_address): Likewise.
* spu-tdep.c (spu2ppu_prev_register): Likewise.
(spu_get_overlay_table): Likewise.
* stabsread.c (patch_block_stabs): Likewise.
(define_symbol): Likewise.
(again:): Likewise.
(read_member_functions): Likewise.
(read_one_struct_field): Likewise.
(read_enum_type): Likewise.
(common_block_start): Likewise.
* stack.c (read_frame_arg): Likewise.
(backtrace_command): Likewise.
* stap-probe.c (stap_parse_register_operand): Likewise.
* symfile.c (syms_from_objfile_1): Likewise.
(find_separate_debug_file): Likewise.
(load_command): Likewise.
(load_progress): Likewise.
(load_section_callback): Likewise.
(reread_symbols): Likewise.
(add_filename_language): Likewise.
(allocate_compunit_symtab): Likewise.
(read_target_long_array): Likewise.
(simple_read_overlay_table): Likewise.
* symtab.c (symbol_set_names): Likewise.
(resize_symbol_cache): Likewise.
(rbreak_command): Likewise.
(completion_list_add_name): Likewise.
(completion_list_objc_symbol): Likewise.
(add_filename_to_list): Likewise.
* target-descriptions.c (maint_print_c_tdesc_cmd): Likewise.
* target-memory.c (target_write_memory_blocks): Likewise.
* target.c (target_read_string): Likewise.
(read_whatever_is_readable): Likewise.
(target_read_alloc_1): Likewise.
(simple_search_memory): Likewise.
(target_fileio_read_alloc_1): Likewise.
* tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
* top.c (command_line_input): Likewise.
* tracefile-tfile.c (tfile_fetch_registers): Likewise.
* tracefile.c (tracefile_fetch_registers): Likewise.
* tracepoint.c (add_memrange): Likewise.
(init_collection_list): Likewise.
(add_aexpr): Likewise.
(trace_dump_actions): Likewise.
(parse_trace_status): Likewise.
(parse_tracepoint_definition): Likewise.
(parse_tsv_definition): Likewise.
(parse_static_tracepoint_marker_definition): Likewise.
* tui/tui-file.c (tui_sfileopen): Likewise.
(tui_file_adjust_strbuf): Likewise.
* tui/tui-io.c (tui_expand_tabs): Likewise.
* tui/tui-source.c (tui_set_source_content): Likewise.
* typeprint.c (find_global_typedef): Likewise.
* ui-file.c (do_ui_file_xstrdup): Likewise.
(ui_file_obsavestring): Likewise.
(mem_file_write): Likewise.
* utils.c (make_hex_string): Likewise.
(get_regcomp_error): Likewise.
(puts_filtered_tabular): Likewise.
(gdb_realpath_keepfile): Likewise.
(ldirname): Likewise.
(gdb_bfd_errmsg): Likewise.
(substitute_path_component): Likewise.
* valops.c (search_struct_method): Likewise.
(find_oload_champ_namespace_loop): Likewise.
* valprint.c (print_decimal_chars): Likewise.
(read_string): Likewise.
(generic_emit_char): Likewise.
* varobj.c (varobj_delete): Likewise.
(varobj_value_get_print_value): Likewise.
* vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise.
* windows-tdep.c (display_one_tib): Likewise.
* xcoffread.c (read_xcoff_symtab): Likewise.
(process_xcoff_symbol): Likewise.
(swap_sym): Likewise.
(scan_xcoff_symtab): Likewise.
(xcoff_initial_scan): Likewise.
* xml-support.c (gdb_xml_end_element): Likewise.
(xml_process_xincludes): Likewise.
(xml_fetch_content_from_file): Likewise.
* xml-syscall.c (xml_list_of_syscalls): Likewise.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise.
gdb/gdbserver/ChangeLog:
* ax.c (gdb_parse_agent_expr): Add cast to allocation result
assignment.
(gdb_unparse_agent_expr): Likewise.
* hostio.c (require_data): Likewise.
(handle_pread): Likewise.
* linux-low.c (disable_regset): Likewise.
(fetch_register): Likewise.
(store_register): Likewise.
(get_dynamic): Likewise.
(linux_qxfer_libraries_svr4): Likewise.
* mem-break.c (delete_fast_tracepoint_jump): Likewise.
(set_fast_tracepoint_jump): Likewise.
(uninsert_fast_tracepoint_jumps_at): Likewise.
(reinsert_fast_tracepoint_jumps_at): Likewise.
(validate_inserted_breakpoint): Likewise.
(clone_agent_expr): Likewise.
* regcache.c (init_register_cache): Likewise.
* remote-utils.c (putpkt_binary_1): Likewise.
(decode_M_packet): Likewise.
(decode_X_packet): Likewise.
(look_up_one_symbol): Likewise.
(relocate_instruction): Likewise.
(monitor_output): Likewise.
* server.c (handle_search_memory): Likewise.
(handle_qxfer_exec_file): Likewise.
(handle_qxfer_libraries): Likewise.
(handle_qxfer): Likewise.
(handle_query): Likewise.
(handle_v_cont): Likewise.
(handle_v_run): Likewise.
(captured_main): Likewise.
* target.c (write_inferior_memory): Likewise.
* thread-db.c (try_thread_db_load_from_dir): Likewise.
* tracepoint.c (init_trace_buffer): Likewise.
(add_tracepoint_action): Likewise.
(add_traceframe): Likewise.
(add_traceframe_block): Likewise.
(cmd_qtdpsrc): Likewise.
(cmd_qtdv): Likewise.
(cmd_qtstatus): Likewise.
(response_source): Likewise.
(response_tsv): Likewise.
(cmd_qtnotes): Likewise.
(gdb_collect): Likewise.
(initialize_tracepoint): Likewise.
|
|
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is
to change some calls to the xmalloc family of functions to calls to the
equivalents in the XNEW family. This avoids adding an explicit cast, so
it keeps the code a bit more readable. Some of them also map relatively
well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be
possible to do scripted replacements if needed.
I only changed calls that were obviously allocating memory for one or
multiple "objects". Allocation of variable sizes (such as strings or
buffer handling) will be for later (and won't use XNEW).
- xmalloc (sizeof (struct foo)) -> XNEW (struct foo)
- xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num)
- xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo)
- xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num)
- xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num)
- obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo)
- obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num)
- alloca (sizeof (struct foo)) -> XALLOCA (struct foo)
- alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num)
Some instances of xmalloc followed by memset to zero the buffer were
replaced by XCNEW or XCNEWVEC.
I regtested on x86-64, Ubuntu 14.04, but the patch touches many
architecture-specific files. For those I'll have to rely on the
buildbot or people complaining that I broke their gdb.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_add_process): Likewise.
* aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
* ada-exp.y (write_ambiguous_var): Likewise.
* ada-lang.c (resolve_subexp): Likewise.
(user_select_syms): Likewise.
(assign_aggregate): Likewise.
(ada_evaluate_subexp): Likewise.
(cache_symbol): Likewise.
* addrmap.c (allocate_key): Likewise.
(addrmap_create_mutable): Likewise.
* aix-thread.c (sync_threadlists): Likewise.
* alpha-tdep.c (alpha_push_dummy_call): Likewise.
(alpha_gdbarch_init): Likewise.
* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
* arm-linux-nat.c (arm_linux_add_process): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* arm-tdep.c (push_stack_item): Likewise.
(arm_displaced_step_copy_insn): Likewise.
(arm_gdbarch_init): Likewise.
(_initialize_arm_tdep): Likewise.
* avr-tdep.c (push_stack_item): Likewise.
* ax-general.c (new_agent_expr): Likewise.
* block.c (block_initialize_namespace): Likewise.
* breakpoint.c (alloc_counted_command_line): Likewise.
(update_dprintf_command_list): Likewise.
(parse_breakpoint_sals): Likewise.
(decode_static_tracepoint_spec): Likewise.
(until_break_command): Likewise.
(clear_command): Likewise.
(update_global_location_list): Likewise.
(get_breakpoint_objfile_data) Likewise.
* btrace.c (ftrace_new_function): Likewise.
(btrace_set_insn_history): Likewise.
(btrace_set_call_history): Likewise.
* buildsym.c (add_symbol_to_list): Likewise.
(record_pending_block): Likewise.
(start_subfile): Likewise.
(start_buildsym_compunit): Likewise.
(push_subfile): Likewise.
(end_symtab_get_static_block): Likewise.
(buildsym_init): Likewise.
* cli/cli-cmds.c (source_command): Likewise.
* cli/cli-decode.c (add_cmd): Likewise.
* cli/cli-script.c (build_command_line): Likewise.
(setup_user_args): Likewise.
(realloc_body_list): Likewise.
(process_next_line): Likewise.
(copy_command_lines): Likewise.
* cli/cli-setshow.c (do_set_command): Likewise.
* coff-pe-read.c (read_pe_exported_syms): Likewise.
* coffread.c (coff_locate_sections): Likewise.
(coff_symtab_read): Likewise.
(coff_read_struct_type): Likewise.
* common/cleanups.c (make_my_cleanup2): Likewise.
* common/common-exceptions.c (throw_it): Likewise.
* common/filestuff.c (make_cleanup_close): Likewise.
* common/format.c (parse_format_string): Likewise.
* common/queue.h (DEFINE_QUEUE_P): Likewise.
* compile/compile-object-load.c (munmap_list_add): Likewise.
(compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (append_args): Likewise.
* corefile.c (specify_exec_file_hook): Likewise.
* cp-support.c (make_symbol_overload_list): Likewise.
* cris-tdep.c (push_stack_item): Likewise.
(cris_gdbarch_init): Likewise.
* ctf.c (ctf_trace_file_writer_new): Likewise.
* dbxread.c (init_header_files): Likewise.
(add_new_header_file): Likewise.
(init_bincl_list): Likewise.
(dbx_end_psymtab): Likewise.
(start_psymtab): Likewise.
(dbx_end_psymtab): Likewise.
* dcache.c (dcache_init): Likewise.
* dictionary.c (dict_create_hashed): Likewise.
(dict_create_hashed_expandable): Likewise.
(dict_create_linear): Likewise.
(dict_create_linear_expandable): Likewise.
* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
* dummy-frame.c (register_dummy_frame_dtor): Likewise.
* dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
* dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
(decode_frame_entry_1): Likewise.
* dwarf2expr.c (new_dwarf_expr_context): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
* dwarf2read.c (dwarf2_has_info): Likewise.
(create_signatured_type_table_from_index): Likewise.
(dwarf2_read_index): Likewise.
(dw2_get_file_names_reader): Likewise.
(create_all_type_units): Likewise.
(read_cutu_die_from_dwo): Likewise.
(init_tu_and_read_dwo_dies): Likewise.
(init_cutu_and_read_dies): Likewise.
(create_all_comp_units): Likewise.
(queue_comp_unit): Likewise.
(inherit_abstract_dies): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_add_field): Likewise.
(dwarf2_add_typedef): Likewise.
(dwarf2_add_member_fn): Likewise.
(attr_to_dynamic_prop): Likewise.
(abbrev_table_alloc_abbrev): Likewise.
(abbrev_table_read_table): Likewise.
(add_include_dir): Likewise.
(add_file_name): Likewise.
(dwarf_decode_line_header): Likewise.
(dwarf2_const_value_attr): Likewise.
(dwarf_alloc_block): Likewise.
(parse_macro_definition): Likewise.
(set_die_type): Likewise.
(write_psymtabs_to_index): Likewise.
(create_cus_from_index): Likewise.
(dwarf2_create_include_psymtab): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(build_type_psymtab_dependencies): Likewise.
(read_comp_units_from_section): Likewise.
(compute_compunit_symtab_includes): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(read_func_scope): Likewise.
(process_structure_scope): Likewise.
(mark_common_block_symbol_computed): Likewise.
(load_partial_dies): Likewise.
(dwarf2_symbol_mark_computed): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_read_minimal_symbols): Likewise.
* environ.c (make_environ): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* event-loop.c (create_file_handler): Likewise.
(create_async_signal_handler): Likewise.
(create_async_event_handler): Likewise.
(create_timer): Likewise.
* exec.c (build_section_table): Likewise.
* fbsd-nat.c (fbsd_remember_child): Likewise.
* fork-child.c (fork_inferior): Likewise.
* frv-tdep.c (new_variant): Likewise.
* gdbarch.sh (gdbarch_alloc): Likewise.
(append_name): Likewise.
* gdbtypes.c (rank_function): Likewise.
(copy_type_recursive): Likewise.
(add_dyn_prop): Likewise.
* gnu-nat.c (make_proc): Likewise.
(make_inf): Likewise.
(gnu_write_inferior): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
(build_std_type_info_type): Likewise.
* guile/scm-param.c (compute_enum_list): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* guile/scm-value.c (gdbscm_value_call): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
(read_unwind_info): Likewise.
* ia64-tdep.c (ia64_gdbarch_init): Likewise.
* infcall.c (dummy_frame_context_saver_setup): Likewise.
(call_function_by_hand_dummy): Likewise.
* infcmd.c (step_once): Likewise.
(finish_forward): Likewise.
(attach_command): Likewise.
(notice_new_inferior): Likewise.
* inferior.c (add_inferior_silent): Likewise.
* infrun.c (add_displaced_stepping_state): Likewise.
(save_infcall_control_state): Likewise.
(save_inferior_ptid): Likewise.
(_initialize_infrun): Likewise.
* jit.c (bfd_open_from_target_memory): Likewise.
(jit_gdbarch_data_init): Likewise.
* language.c (add_language): Likewise.
* linespec.c (decode_line_2): Likewise.
* linux-nat.c (add_to_pid_list): Likewise.
(add_initial_lwp): Likewise.
* linux-thread-db.c (add_thread_db_info): Likewise.
(record_thread): Likewise.
(info_auto_load_libthread_db): Likewise.
* m32c-tdep.c (m32c_gdbarch_init): Likewise.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* m88k-tdep.c (m88k_analyze_prologue): Likewise.
* macrocmd.c (macro_define_command): Likewise.
* macroexp.c (gather_arguments): Likewise.
* macroscope.c (sal_macro_scope): Likewise.
* macrotab.c (new_macro_table): Likewise.
* mdebugread.c (push_parse_stack): Likewise.
(parse_partial_symbols): Likewise.
(parse_symbol): Likewise.
(psymtab_to_symtab_1): Likewise.
(new_block): Likewise.
(new_psymtab): Likewise.
(mdebug_build_psymtabs): Likewise.
(add_pending): Likewise.
(elfmdebug_build_psymtabs): Likewise.
* mep-tdep.c (mep_gdbarch_init): Likewise.
* mi/mi-main.c (mi_execute_command): Likewise.
* mi/mi-parse.c (mi_parse_argv): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (terminate_minimal_symbol_table): Likewise.
* mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
* msp430-tdep.c (msp430_gdbarch_init): Likewise.
* mt-tdep.c (mt_registers_info): Likewise.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
* nat/linux-btrace.c (linux_enable_bts): Likewise.
(linux_enable_pt): Likewise.
* nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
(linux_xfer_osdata_processgroups): Likewise.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* nto-procfs.c (procfs_meminfo): Likewise.
* objc-lang.c (start_msglist): Likewise.
(selectors_info): Likewise.
(classes_info): Likewise.
(find_methods): Likewise.
* objfiles.c (allocate_objfile): Likewise.
(update_section_map): Likewise.
* osabi.c (gdbarch_register_osabi): Likewise.
(gdbarch_register_osabi_sniffer): Likewise.
* parse.c (start_arglist): Likewise.
* ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
(hwdebug_insert_point): Likewise.
* printcmd.c (display_command): Likewise.
(ui_printf): Likewise.
* procfs.c (create_procinfo): Likewise.
(load_syscalls): Likewise.
(proc_get_LDT_entry): Likewise.
(proc_update_threads): Likewise.
* prologue-value.c (make_pv_area): Likewise.
(pv_area_store): Likewise.
* psymtab.c (extend_psymbol_list): Likewise.
(init_psymbol_list): Likewise.
(allocate_psymtab): Likewise.
* python/py-inferior.c (add_thread_object): Likewise.
* python/py-param.c (compute_enum_values): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/py-varobj.c (py_varobj_iter_next): Likewise.
* python/python.c (ensure_python_env): Likewise.
* record-btrace.c (record_btrace_start_replaying): Likewise.
* record-full.c (record_full_reg_alloc): Likewise.
(record_full_mem_alloc): Likewise.
(record_full_end_alloc): Likewise.
(record_full_core_xfer_partial): Likewise.
* regcache.c (get_thread_arch_aspace_regcache): Likewise.
* remote-fileio.c (remote_fileio_init_fd_map): Likewise.
* remote-notif.c (remote_notif_state_allocate): Likewise.
* remote.c (demand_private_info): Likewise.
(remote_notif_stop_alloc_reply): Likewise.
(remote_enable_btrace): Likewise.
* reverse.c (save_bookmark_command): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
* rx-tdep.c (rx_gdbarch_init): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
* ser-go32.c (dos_get_tty_state): Likewise.
(dos_copy_tty_state): Likewise.
* ser-mingw.c (ser_windows_open): Likewise.
(ser_console_wait_handle): Likewise.
(ser_console_get_tty_state): Likewise.
(make_pipe_state): Likewise.
(net_windows_open): Likewise.
* ser-unix.c (hardwire_get_tty_state): Likewise.
(hardwire_copy_tty_state): Likewise.
* solib-aix.c (solib_aix_new_lm_info): Likewise.
* solib-dsbt.c (dsbt_current_sos): Likewise.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
(frv_relocate_main_executable): Likewise.
* solib-spu.c (spu_bfd_fopen): Likewise.
* solib-svr4.c (lm_info_read): Likewise.
(svr4_copy_library_list): Likewise.
(svr4_default_sos): Likewise.
* source.c (find_source_lines): Likewise.
(line_info): Likewise.
(add_substitute_path_rule): Likewise.
* spu-linux-nat.c (spu_bfd_open): Likewise.
* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
* stabsread.c (dbx_lookup_type): Likewise.
(read_type): Likewise.
(read_member_functions): Likewise.
(read_struct_fields): Likewise.
(read_baseclasses): Likewise.
(read_args): Likewise.
(_initialize_stabsread): Likewise.
* stack.c (func_command): Likewise.
* stap-probe.c (handle_stap_probe): Likewise.
* symfile.c (addrs_section_sort): Likewise.
(addr_info_make_relative): Likewise.
(load_section_callback): Likewise.
(add_symbol_file_command): Likewise.
(init_filename_language_table): Likewise.
* symtab.c (create_filename_seen_cache): Likewise.
(sort_search_symbols_remove_dups): Likewise.
(search_symbols): Likewise.
* target.c (make_cleanup_restore_target_terminal): Likewise.
* thread.c (new_thread): Likewise.
(enable_thread_stack_temporaries): Likewise.
(make_cleanup_restore_current_thread): Likewise.
(thread_apply_all_command): Likewise.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* top.c (gdb_readline_wrapper): Likewise.
* tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
* tracepoint.c (trace_find_line_command): Likewise.
(all_tracepoint_actions_and_cleanup): Likewise.
(make_cleanup_restore_current_traceframe): Likewise.
(get_uploaded_tp): Likewise.
(get_uploaded_tsv): Likewise.
* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
(tui_alloc_win_info): Likewise.
(tui_alloc_content): Likewise.
(tui_add_content_elements): Likewise.
* tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
(tui_set_disassem_content): Likewise.
* ui-file.c (ui_file_new): Likewise.
(stdio_file_new): Likewise.
(tee_file_new): Likewise.
* utils.c (make_cleanup_restore_integer): Likewise.
(add_internal_problem_command): Likewise.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* valops.c (find_oload_champ): Likewise.
* value.c (allocate_value_lazy): Likewise.
(record_latest_value): Likewise.
(create_internalvar): Likewise.
* varobj.c (install_variable): Likewise.
(new_variable): Likewise.
(new_root_variable): Likewise.
(cppush): Likewise.
(_initialize_varobj): Likewise.
* windows-nat.c (windows_make_so): Likewise.
* x86-nat.c (x86_add_process): Likewise.
* xcoffread.c (arrange_linetable): Likewise.
(allocate_include_entry): Likewise.
(process_linenos): Likewise.
(SYMBOL_DUP): Likewise.
(xcoff_start_psymtab): Likewise.
(xcoff_end_psymtab): Likewise.
* xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/gdbserver/ChangeLog:
* ax.c (gdb_parse_agent_expr): Likewise.
(compile_bytecodes): Likewise.
* dll.c (loaded_dll): Likewise.
* event-loop.c (append_callback_event): Likewise.
(create_file_handler): Likewise.
(create_file_event): Likewise.
* hostio.c (handle_open): Likewise.
* inferiors.c (add_thread): Likewise.
(add_process): Likewise.
* linux-aarch64-low.c (aarch64_linux_new_process): Likewise.
* linux-arm-low.c (arm_new_process): Likewise.
(arm_new_thread): Likewise.
* linux-low.c (add_to_pid_list): Likewise.
(linux_add_process): Likewise.
(handle_extended_wait): Likewise.
(add_lwp): Likewise.
(enqueue_one_deferred_signal): Likewise.
(enqueue_pending_signal): Likewise.
(linux_resume_one_lwp_throw): Likewise.
(linux_resume_one_thread): Likewise.
(linux_read_memory): Likewise.
(linux_write_memory): Likewise.
* linux-mips-low.c (mips_linux_new_process): Likewise.
(mips_linux_new_thread): Likewise.
(mips_add_watchpoint): Likewise.
* linux-x86-low.c (initialize_low_arch): Likewise.
* lynx-low.c (lynx_add_process): Likewise.
* mem-break.c (set_raw_breakpoint_at): Likewise.
(set_breakpoint): Likewise.
(add_condition_to_breakpoint): Likewise.
(add_commands_to_breakpoint): Likewise.
(clone_agent_expr): Likewise.
(clone_one_breakpoint): Likewise.
* regcache.c (new_register_cache): Likewise.
* remote-utils.c (look_up_one_symbol): Likewise.
* server.c (queue_stop_reply): Likewise.
(start_inferior): Likewise.
(queue_stop_reply_callback): Likewise.
(handle_target_event): Likewise.
* spu-low.c (fetch_ppc_memory): Likewise.
(store_ppc_memory): Likewise.
* target.c (set_target_ops): Likewise.
* thread-db.c (thread_db_load_search): Likewise.
(try_thread_db_load_1): Likewise.
* tracepoint.c (add_tracepoint): Likewise.
(add_tracepoint_action): Likewise.
(create_trace_state_variable): Likewise.
(cmd_qtdpsrc): Likewise.
(cmd_qtro): Likewise.
(add_while_stepping_state): Likewise.
* win32-low.c (child_add_thread): Likewise.
(get_image_name): Likewise.
|
