| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* gdbarch.sh: Adjust comment to refer to
in_solib_dynsym_resolve_code().
* gdbarch.h, gdbarch.c: Update.
* solib-osf.c: Ditto.
* infrun.c: Ditto.
(handle_inferior_event): Use in_solib_dynsym_resolve_code
unconditionally.
* config/mips/nm-irix5.h: Remove undef of
IN_SOLIB_DYNSYM_RESOLVE_CODE.
* gdbint.texinfo: Refer to target_so_ops.in_dynsym_resolve_code
instead of IN_SOLIB_DYNSYM_RESOLVE_CODE.
|
|
|
|
(frame_unwind_caller_id): ... this. All callers updated.
(frame_pc_unwind): Renamed to ...
(frame_unwind_caller_pc): ... this. All callers updated.
* frame.h: Document frame_unwind_caller_WHAT functions.
(frame_unwind_id): Renamed to ...
(frame_unwind_caller_id): ... this.
(frame_pc_unwind): Renamed to ...
(frame_unwind_caller_pc): ... this.
* hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
* stack.c (parse_frame_specification_1): Do not rely on
frame_unwind_id.
|
|
before inserting breakpoints.
|
|
* infrun.c (struct thread_stepping_state): Delete sal member.
(init_thread_stepping_state): Add local sal. Use it instead of
tss->sal.
(handle_inferior_event): New local stop_pc_sal. Use it instead of
tss->sal.
(step_into_function): Add local stop_func_sal. Use it instead of
tss->sal.
|
|
|
|
were stopped.
|
|
TARGET_SIGNAL_TRAP on a STOP_QUIETLY_NO_SIGSTOP.
|
|
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
|
|
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
|
|
* infrun.c (proceed): Clear the stepping state, set
previous_inferior_ptid and clear infwait state.
(wait_for_inferior): Don't clear the stepping state, set
previous_inferior_ptid, or clear the infwait state here.
(fetch_inferior_event): Don't clear the stepping state, set
previous_inferior_ptid, or clear the infwait state here. Don't
condition on wait_for_more.
|
|
* infrun.c (currently_stepping): Take a struct
thread_stepping_state instead of an execution_control_state.
(struct thread_stepping_state): New, split from
execution_control_state.
(gtss, tss): New globals.
(proceed): Clear the stepping state, set previous_inferior_ptid
and clear infwait state.
(init_wait_for_inferior): Clear the stepping state,
previous_inferior_ptid and infwait state.
(waiton_ptid, infwait_state): New, split from
execution_control_state.
(struct execution_control_state): Members that persist through
events moved out to either struct thred_stepping_state or made
global. Deleted unneeded wp, saved_inferior_ptid, tmpstatus.
(wait_for_inferior, fetch_inferior_event): Use local
execution_control_state. Update to execution_control_state split.
(init_execution_control_state): Adjust.
(init_thread_stepping_state): New, extracted from
init_execution_control_state.
(context_switch): Take a ptid instead of an
execution_control_state.
(context_switch_to): Adjust.
(adjust_pc_after_break): Adjust.
(init_infwait_state): New.
(handle_inferior_event): Adjust.
|
|
* gdbthread.h: Remove unneeded forward declarations.
Include "inferior.h".
(struct thread_info): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi and stop_signal members.
(save_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
(load_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
* thread.c (load_infrun_state): In non-stop mode, load
continuations, intermediate_continuations, proceed_to_finish,
step_over_calls, stop_step, step_multi and stop_signal.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(free_thread): Clear The thread's stop_bpstat.
* inferior.h (context_switch_to): Declare.
* infrun.c (ecss): New global.
(context_switch): Context switch continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(wait_for_inferior): Use global ecss.
(async_ecss, async_ecs): Delete.
(fetch_inferior_event): Use global ecss.
(context_switch_to): New.
* top.c (execute_command): In non-stop, only check if the current
thread is running, in all-stop, check if there's any thread
running.
* breakpoint.c (bpstat_remove_breakpoint): New.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Clear the stop_bpstats of all threads.
* mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the
current thread is running, in all-stop, check if there's any
thread running.
* Makefile.in (gdbthread_h): Depend on $(inferior_h).
|
|
* inferior.h (non_stop): Declare.
* infrun.c (non_stop, non_stop_1): New.
(set_non_stop, show_non_stop): New.
(_initialize_infrun): Add "set/show non-stop" command.
|
|
* target.h (struct target_waitstatus): Store related_pid as a ptid.
(inferior_has_forked, inferior_has_vforked, inferior_has_execd):
Take a ptid_t.
* breakpoint.h (struct breakpoint): Change forked_inferior_pid
type to ptid.
* breakpoint.c (print_it_typical, bpstat_check_location)
(print_one_breakpoint_location, set_raw_breakpoint_without_location)
(create_fork_vfork_event_catchpoint): Adjust.
* infrun.c (fork_event): Change parent_pid and child_pid types to
ptid.
(follow_exec, inferior_has_forked, inferior_has_vforked)
(inferior_has_execd): Take a ptid_t and don't trim it.
* linux-thread-db.c (thread_db_wait): Don't trim the returned ptid.
* linux-nat.c (linux_child_follow_fork): Adjust.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait): Adjust.
* win32-nat.c (get_win32_debug_event): Don't set related_pid.
|
|
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
|
|
main exec file.
|
|
(bpstat_stop_status): Process moribund locations.
(update_global_location_list): Add removed
locations to moribund_locations.
(breakpoint_retire_moribund): New.
* breakpoint.h (struct bp_location): New field
events_till_retirement.
(breakpoint_retire_moribund): Declare.
* thread.c (thread_count): New.
* infrun.c (handle_inferior_event): Call
breakpoint_retire_moribund.
* gdbthread.h (thread_count): Declare.
|
|
* monitor.c (monitor_open): Include "gdbthread.h". Clear thread
list here.
* remote.c (record_currthread): Upgrade the main thread and its
entry in the thread list if this is the first time we hear about
threads.
(remote_thread_alive): Consider magic_null_ptid or a ptid without
a tid member always alive.
(remote_find_new_threads): Don't update the main thread here.
(remote_start_remote): Clear thread list here. Always add the
main thread.
(extended_remote_attach_1): Add the main thread here.
(extended_remote_mourn_1): Re-add the main thread here.
(extended_remote_create_inferior_1): Add a main thread.
* Makefile.in (monitor.o): Depend on $(gdbthread_h).
|
|
* infrun.c (_initialize_infrun): White space and typo fix.
|
|
* infcall.c (call_function_by_hand): Set both
suppress_resume_observer and suppress_stop_observer.
* infcmd.c (suppress_run_stop_observers): Split into...
(suppress_resume_observer, suppress_stop_observer): ...those.
(finish_command_continuation): Clear suppress_stop_observer.
(finish_command): Set suppress_stop_observer.
* inferior.h (suppress_run_stop_observers): Split into...
(suppress_resume_observer, suppress_stop_observer): ...those.
* infrun.c (normal_stop): Check for suppress_stop_observer.
* thread.c (set_running): Check for suppress_resume_observer.
|
|
* Makefile.in: Update dependencies.
* gdbthread.h (struct thread_info): New field
running_.
(set_running, is_running): New.
* thread.c (set_running, is_running): New.
* inferior.h (suppress_normal_stop_observer): Rename to...
(suppress_run_stop_observers): ..this.
* infcmd.c (suppress_normal_stop_observer): Rename to...
(suppress_run_stop_observers): ..this.
(finish_command_continuation, finish_command): Adjust.
* infcall.c (call_function_by_hand): Adjust.
* infrun.c (normal_stop): Call set_running.
* target.c (target_resume): New. Call set_running.
* target.h (target_resume): Convert from macro to
a function.
* mi/mi-interp.c (mi_on_resume): New.
(mi_interpreter_init): Register mi_on_resume.
|
|
* inferior.h (suppress_normal_stop_observer): New.
* infcall.c (call_function_by_hand): Disable stop events when
doing function calls.
* infmcd.c (suppress_normal_stop_observer): New.
(finish_command_continuation): Call normal_stop observer
explicitly.
(finish_command): Disable stop events inside proceed.
* infrun.c (normal_stop): Don't call normal stop observer if
suppressed of if multi-step is in progress.
|
|
* thread.c (thread_command) : Use it.
* infrun.c (normal_stop): Use it.
|
|
* breakpoint.c (update_breakpoints_after_exec): Delete bp_longjmp
and bp_longjmp_resume breakpoints.
(breakpoint_address_is_meaningful): Claim bp_longjmp_resume as
meaningful.
(create_longjmp_breakpoint): Don't create bp_longjmp_resume
breakpoints. Create bp_longjmp breakpoints as momentary
breakpoints.
(enable_longjmp_breakpoint): Delete.
(set_longjmp_breakpoint): New.
(disable_longjmp_breakpoint): Delete.
(delete_longjmp_breakpoint): New.
(set_longjmp_resume_breakpoint): Delete.
(set_momentary_breakpoint_at_pc): New.
(breakpoint_re_set_one): Don't delete bp_longjmp and
bp_longjmp_resume breakpoints.
(breakpoint_re_set): Don't create longjmp and longjmp-resume
breakpoints.
* infrun.c (step_resume_breakpoint): Add comment.
(struct execution_control_state): Delete handling_longjmp member.
(init_execution_control_state). Don't clear handling_longjmp.
(context_switch): Don't context switch handling_longjmp.
(handle_inferior_event): If handling a bp_longjmp breakpoint,
create a bp_longjmp_resume breakpoint, and set it as current
step_resume_breakpoint, then step over the longjmp breakpoint. If
handling a bp_longjmp_resume breakpoint, don't delete the longjmp
breakpoint, delete the longjmp-resume breakpoint, and stop
stepping.
(currently_stepping): Remove handling_longjmp from expression.
(insert_step_resume_breakpoint_at_sal): Update comment.
(insert_longjmp_resume_breakpoint): New.
* breakpoint.h (set_momentary_breakpoint_at_pc): Declare.
(enable_longjmp_breakpoint, disable_longjmp_breakpoint): Delete
declarations.
(set_longjmp_breakpoint, delete_longjmp_breakpoint): Declare.
(set_longjmp_resume_breakpoint): Delete declaration.
* gdbthread.h (save_infrun_state): Remove handling_longjmp
parameter.
(load_infrun_state): Delete *handling_longjmp parameter.
* thread.c (save_infrun_state): Remove handling_longjmp parameter.
Update body.
(load_infrun_state): Delete *handling_longjmp parameter. Update
body.
* infcmd.c (disable_longjmp_breakpoint_cleanup): Delete.
(delete_longjmp_breakpoint_cleanup): New.
(step_1): Call set_longjmp_breakpoint instead of
enable_longjmp_breakpoint. Use delete_longjmp_breakpoint_cleanup
instead of disable_longjmp_breakpoint_cleanup when making cleanup.
(step_1_continuation): Pass thread id in the continuation args to
step_once.
(step_once): Add thread parameter. Pass thread id the the
continuation.
gdb/testsuite/
* gdb.cp/annota2.exp: Adjust to breakpoints invalidations at
different times.
|
|
* regcache.h (regcache_read_pc, regcache_write_pc): Add prototypes.
* regcache.c (read_pc_pid): Remove, replace by ...
(regcache_read_pc): ... this function.
(write_pc_pid): Remove, replace by ...
(regcache_write_pc): ... this function.
(read_pc, write_pc): Update.
* infrun.c (displaced_step_prepare): Replace read_pc_pid and
write_pc_pid by regcache_read_pc and regcache_write_pc.
(displaced_step_fixup): Likewise.
(resume): Likewise. Use regcache arch instead of current_gdbarch.
(prepare_to_proceed): Likewise.
(proceed): Likewise.
(adjust_pc_after_break): Likewise.
(handle_inferior_event): Likewise.
* linux-nat.c (cancel_breakpoint): Likewise.
* linux-thread-db.c (check_event): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
* tracepoint.c (trace_dump_command): Likewise.
|
|
TARGET_WAITKIND_LOADED events during startup (i.e. in the shell).
|
|
gdb/
* gdbarch.sh (max_insn_length): New 'variable'.
(displaced_step_copy, displaced_step_fixup)
(displaced_step_free_closure, displaced_step_location): New
functions.
(struct displaced_step_closure): Add forward declaration.
* gdbarch.c, gdbarch.h: Regenerated.
* arch-utils.c: #include "objfiles.h".
(simple_displaced_step_copy_insn)
(simple_displaced_step_free_closure)
(displaced_step_at_entry_point): New functions.
* arch-utils.h (simple_displaced_step_copy_insn)
(simple_displaced_step_free_closure)
(displaced_step_at_entry_point): New prototypes.
* i386-tdep.c (I386_MAX_INSN_LEN): Rename to...
(I386_MAX_MATCHED_INSN_LEN): ... this.
(i386_absolute_jmp_p, i386_absolute_call_p)
(i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p)
(i386_displaced_step_fixup): New functions.
(struct i386_insn, i386_match_insn): Update.
(i386_gdbarch_init): Set gdbarch_max_insn_length.
* i386-tdep.h (I386_MAX_INSN_LEN): New.
(i386_displaced_step_fixup): New prototype.
* i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h".
Register gdbarch_displaced_step_copy,
gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure,
and gdbarch_displaced_step_location functions.
* infrun.c (debug_displaced): New variable.
(show_debug_displaced): New function.
(struct displaced_step_request): New struct.
(displaced_step_request_queue, displaced_step_ptid)
(displaced_step_gdbarch, displaced_step_closure)
(displaced_step_original, displaced_step_copy)
(displaced_step_saved_copy, can_use_displaced_stepping): New
variables.
(show_can_use_displaced_stepping, use_displaced_stepping)
(displaced_step_clear, cleanup_displaced_step_closure)
(displaced_step_dump_bytes, displaced_step_prepare)
(displaced_step_clear_cleanup, write_memory_ptid)
(displaced_step_fixup): New functions.
(resume): Call displaced_step_prepare.
(proceed): Call read_pc once, and remember the value. If using
displaced stepping, don't remove breakpoints.
(handle_inferior_event): Call displaced_step_fixup. Add some
debugging output. When we try to step over a breakpoint, but get
a signal to deliver to the thread instead, ensure the step-resume
breakpoint is actually inserted. If a thread hop is needed, and
displaced stepping is enabled, don't remove breakpoints.
(init_wait_for_inferior): Call displaced_step_clear.
(_initialize_infrun): Add "set debug displaced" command. Add
"maint set can-use-displaced-stepping" command. Clear
displaced_step_ptid.
* inferior.h (debug_displaced): Declare variable.
(displaced_step_dump_bytes): Declare function.
* Makefile.in (arch-utils.o, i386-linux-tdep.o): Update
dependencies.
gdb/testsuite/
* gdb.asm/asmsrc1.s: Add scratch space.
gdb/doc/
* gdb.texinfo (Debugging Output): Document "set/show debug
displaced".
(Maintenance Commands): Document "maint set/show
can-use-displaced-stepping".
|
|
* main.h (batch_silent): Declare.
* event-top.c: Include main.h.
(gdb_setup_readline): Remove extern batch_silent declaration.
* infrun.c (normal_stop): Don't print source location when running in
--batch-silent mode.
* Makefile.in (event-top.o): Add main.h dependency.
|
|
Pedro Alves <pedro@codesourcery.com>
Based on work by Jan Kratochvil <jan.kratochvil@redhat.com> and Jeff
Johnston <jjohnstn@redhat.com>.
* NEWS: Mention attach to stopped process fix.
* infcmd.c (detach_command, disconnect_command): Discard the thread
list.
* infrun.c (handle_inferior_event): Do not ignore non-SIGSTOP while
attaching. Use signal_stop_state.
(signal_stop_state): Check stop_soon.
* linux-nat.c (kill_lwp): Declare earlier.
(pid_is_stopped, linux_nat_post_attach_wait): New.
(lin_lwp_attach_lwp): Use linux_nat_post_attach_wait. Update
comments.
(linux_nat_attach): Use linux_nat_post_attach_wait.
(detach_callback, linux_nat_detach): Improve handling for signalled
processes.
(linux_nat_pid_to_str): Always print out the LWP ID if it differs
from the process ID.
* Makefile.in (infcmd.o): Update.
2008-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.threads/attach-into-signal.c, gdb.threads/attach-into-signal.exp,
gdb.threads/attach-stopped.c, gdb.threads/attach-stopped.exp,
gdb.threads/attachstop-mt.c, gdb.threads/attachstop-mt.exp: New.
|
|
BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE.
* breakpoint.c (clrs): Delete.
(bpstat_what): Update table.
* infrun.c (handle_inferior_event): Remove
BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE handling.
|
|
* breakpoint.c (until_break_command_continuation): Add
the 'error' parameter. Directly delete the breakoint as
opposed to running cleanups.
(until_break_command): Install continuation only
after starting the target. Don't use exec cleanups,
use ordinary cleanups. Discard cleanups is successfully
started the target in async mode.
(make_cleanup_delete_breakpoint): Remove.
* breakpoint.h (make_cleanup_delete_breakpoint): Remove
declaration.
* defs.h (do_exec_cleanups, make_exec_cleanup): Remove
declarations.
(struct continations): Add the 'error' parameter to the
continuation_hook field.
(add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Add the 'error' parameter.
* exceptions.c (throw_exception): Don't call do_exec_cleanups.
* inf-loop.c (inferior_event_handler): Instead of calling
discard_all_continuations, use do_all_continuations with 1 as
'error' parameter. Pass 0 as 'error' parameter in existing uses
of discard_all_continuations.
* infcmd.c (step_1): Do not use exec cleanup. For async case, discard
cleanups.
(step_once): Install continuation only after resuming the target.
(step_1_continuation): Disable longjmp breakpoint on error.
(finish_command_continuation): Add the error parameter. Delete
the finish breakpoint directly, do not use cleanups.
(finish_command): Do not use exec_cleanups. Always setup
continuation. For sync case, immediately run them.
(attach_command_continuation): Add the error parameter.
* infrun.c (fetch_inferior_event): Do not use exec cleanups to
remove step_resume_breakpoint -- adjust delete it directly.
* interps.c (interp_set): Adjust call to do_all_continations.
* mi/mi-interp.c (mi_interpreter_exec_continuation): Do not
do exec cleanups.
* mi/mi-main.c (mi_cmd_target_select): Do not do exec
cleanups.
(mi_cmd_execute): Do not use exec_cleanup.
(mi_execute_async_cli_command): Simplify the string concatenation
logic. Do no use exec cleanup.
(mi_exec_async_cli_cmd_continuation): New parameter error.
Free last_async_command.
* top.c (command_line_handler_continuation): New parameter error.
* utils.c (exec_cleanup_chain, make_exec_cleanup)
(do_exec_cleanups): Remove.
(add_continuation, do_all_continations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): New parameter error.
|
|
Register a vector of bp_location_p.
* breakpoint.c (always_inserted_mode)
(show_always_inserted_mode): New.
(unlink_locations_from_global_list): Remove.
(update_global_location_list)
(update_global_location_list_nothrow): New.
(update_watchpoint): Don't free locations.
(should_insert_location): New.
(insert_bp_location): Use should_insert_location.
(insert_breakpoint_locations): Copied from
insert_breakpoints.
(insert_breakpoint): Use insert_breakpoint_locations.
(bpstat_stop_status): Call update_global_location_list
when disabling breakpoint.
(allocate_bp_location): Don't add to bp_location_chain.
(set_raw_breakpoint)
(create_longjmp_breakpoint, enable_longjmp_breakpoint)
(disable_longjmp_breakpoint, create_overlay_event_breakpoint)
(enable_overlay_breakpoints, disable_overlay_breakpoints)
(set_longjmp_resume_breakpoint)
(enable_watchpoints_after_interactive_call_stop)
(disable_watchpoints_before_interactive_call_start)
(create_internal_breakpoint)
(create_fork_vfork_event_catchpoint)
(create_exec_event_catchpoint, set_momentary_breakpoint)
(create_breakpoints, break_command_1, watch_command_1)
(create_exception_catchpoint)
(handle_gnu_v3_exceptions)
(disable_breakpoint, breakpoint_re_set_one)
(create_thread_event_breakpoint, create_solib_event_breakpoint)
(create_ada_exception_breakpoint): : Don't call check_duplicates.
Call update_global_location_list.
(delete_breakpoint): Don't remove locations and don't
try to reinsert them. Call update_global_location_list.
(update_breakpoint_locations): Likewise.
(restore_always_inserted_mode): New.
(update_breakpoints_after_exec): Temporary disable
always inserted mode.
* Makefile.in: Update dependencies.
* infrun.c (proceed): Remove breakpoints while stepping
over breakpoint.
(handle_inferior_event): Don't remove or insert
breakpoints.
* linux-fork.c (checkpoint_command): Remove breakpoints
before fork and insert after.
(linux_fork_context): Remove breakpoints before switch
and insert after.
* target.c (target_disconnect, target_detach): Remove
breakpoints from target.
|
|
* infrun.c (normal_stop) Move breakpoint_auto_delete further down
to allow printing to 'see' real reason of stop. This fixes PR 2424.
* breakpoint.c (bpdisp_texst): New function. The function takes over
the role of bpstats static array in print_one_breakpoint_location.
(print_it_typical): Print "Temporary breakpoint" instead
of just "Breakpoint" when breakpoint is, well, temporary. For mi-like
protocols, print disp field.
(print_one_breakpoint_location): Removed bpdisps static definition.
Call new bpstat_text function to get value for 'disp' field.
(mention): Print "Temporary breakpoint" instead of just "Breakpoint".
|
|
* fork-child.c (startup_inferior): Do not set
inferior_ignoring_leading_exec_events.
* inf-child.c (inf_child_reported_exec_events_per_exec_call): Remove.
(inf_child_target): Do not set to_reported_exec_events_per_exec_call.
* infrun.c (inferior_ignoring_leading_exec_events): Remove.
(handle_inferior_event): Remove code for ignoring leading exec
events.
* target.c (update_current_target): Do not inherit, or default,
to_reported_exec_events_per_exec_call.
(debug_to_reported_exec_events_per_exec_call): Remove.
(setup_target_debug): Do not set to_reported_exec_events_per_exec_call.
* target.h (target_reported_exec_events_per_exec_call): Remove.
(struct target): Remove the to_reported_exec_events_per_exec_call
field.
|
|
* NEWS: Mention exec tracing support.
* inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
exec events.
* infcmd.c (kill_if_already_running, detach_command)
(disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
* infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
(follow_exec): Do not check may_follow_exec. Do not mourn and push
targets. Apply the sysroot path to the loaded executable. Use
no_shared_libraries.
* linux-nat.c (linux_child_follow_fork): Print fork following
messages if verbose.
(kill_wait_callback): Kill again before waiting a second time.
* symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
no_shared_libraries.
* gdb.base/foll-exec.exp: Update header. Skip on remote targets.
Run on GNU/Linux.
(do_exec_tests): Check for systems which do not support catchpoints.
Do not match START.
* gdb.base/foll-fork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_fork_catchpoints): New.
(explicit_fork_child_follow, catch_fork_child_follow)
(tcatch_fork_parent_follow): Update expected messages.
(do_fork_tests): Use check_fork_catchpoints.
* gdb.base/foll-vfork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_vfork_catchpoints): New.
(vfork_parent_follow_to_bp, tcatch_vfork_then_child_follow): Update
expected messages.
(do_vfork_and_exec_tests): Use check_fork_catchpoints.
|
|
and use it.
(proceed, start_remote): Update call to wait_for_inferior.
* inferior.h (wait_for_inferior): Update declaration.
* fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
* inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
|
|
* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
|
|
we failed to remove breakpoints, error,
don't try to increment PC by hand.
|
|
|
|
stop when stepping into the last line of the current function.
|
|
|
|
* infrun.c (handle_inferior_event):
Use target_pid_to_str instead of
target_pid_or_tid_to_str.
(normal_stop): Likewise.
|
|
(handle_inferior_event): Clear stop_stack_dummy earlier.
|
|
* infrun.c (handle_inferior_event): Remove
calls to remove_breakpoints, except where needed to
communicate change of breakpoint locations to inferior.
(keep_going): If steppping over breakpoint, remove
breakpoints.
|
|
* infrun.c (trap_expected): Rename
to stepping_over_breakpoint. Document.
(stepping_past_breakpoint): Remove.
(stepping_past_breakpoint_ptdi): Renamed
to deferred_step_ptid.
(struct execution_control_state): Rename
the another_trap field to stepping_over_breakpoint.
(struct inferior_status): Rename the trap_expected
field to stepping_over_breakpoint.
(clear_proceed_status, proceed)
(init_execution_control_state, context_switch)
(handle_inferior_event, currently_stepping)
(keep_going, save_inferior_status)
(restore_inferior_status, prepare_to_proceed): Adjust.
* gdbthread.h (struct thread_info): Rename the
trap_expected field to stepping_over_breakpoint.
* thread.c (load_infrun_state, save_infrun_state):
Adjust.
|
|
ignore beakpoints if trap_expected is set.
|
|
* breakpoint.h (insert_breakpoints): Change
return type to void.
* breakpoint.c (insert_breakpoints): Change
return type to void. Rename local return_val
variable to error.
* infrun.c (keep_going): Instead of checking
return value from insert_breakpoints, catch exception.
|
|
The checks of breakpoints_inserted before calling
remove_breakpoints are removed, as remove_breakpoint
won't touch uninserted breakpoints. In a number of places,
we're interested if a breakpoint is inserted at particular
PC, and we now use breakpoint_inserted_here_p. In a few
places, insert_breakpoints can be called unconditionally,
since it won't try to insert already inserted breakpoint.
* breakpoint.h (regular_breakpoint_inserted_here_p): New
declaration.
* breakpoint.c (regular_breakpoint_inserted_here_p): New.
(breakpoint_inserted_here_p): Use
regular_breakpoint_inserted_here_p.
* infrun.c (breakpoints_inserted): Remove.
(resume): Don't check for breakpoints_inserted before
remove_hw_watchpoints. Use breakpoint_inserted_here_p.
(proceed, init_wait_for_inferior): Don't set breakpoints_inserted.
(handle_inferior_event): Don't use breakpoints_inserted.
Use breakpoints_meant_to_be_inserted and
breakpoints_inserted_here_p.
(insert_step_resume_breakpoint_at_sal, keep_going): Use
breakpoints_meant_to_be_inserted. Don't set breakpoints_inserted.
(normal_stop): Don't check for breakpoints_inserted. Don't
set breakpoints_inserted.
(keep_going): Don't check for breakpoints_inserted.
(insert_step_resume_breakpoint_at_sal): Don't insert
breakpoints
|
|
stepping over breakpoint using software single step.
|
