| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
GDB doesn't insert software single step breakpoint if the instruction
branches to itself, so that the program can't stop after command "si".
(gdb) b 32
Breakpoint 2 at 0x8680: file git/gdb/testsuite/gdb.base/branch-to-self.c, line 32.
(gdb) c
Continuing.
Breakpoint 2, main () at gdb/git/gdb/testsuite/gdb.base/branch-to-self.c:32
32 asm (".Lhere: " BRANCH_INSN " .Lhere"); /* loop-line */
(gdb) si
infrun: clear_proceed_status_thread (Thread 3991.3991)
infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: step-over queue now empty
infrun: resuming [Thread 3991.3991] for step-over
infrun: skipping breakpoint: stepping past insn at: 0x8680
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending packet: $Z0,8678,4#f3...Packet received: OK
infrun: skipping breakpoint: stepping past insn at: 0x8680
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending packet: $Z0,b6fe86c8,4#82...Packet received: OK
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=1, current thread [Thread 3991.3991] at 0x868
breakpoint.c:should_be_inserted thinks the breakpoint shouldn't be
inserted, which is wrong. This patch restrict the condition that
only skip the non-single-step breakpoints if they are inserted at
the place we are stepping over, however we don't want to skip
single-step breakpoint if its thread is the thread we are stepping
over, so in this patch, I add a thread num in 'struct step_over_info'
to record the thread we're stepping over.
gdb:
2016-04-25 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (should_be_inserted): Return 0 if the location's
owner is not single step breakpoint or single step breakpoint's
thread isn't the thread which is stepping past a breakpoint.
* gdbarch.sh (software_single_step): Update comments.
* gdbarch.h: Regenerated.
* infrun.c (struct step_over_info) <thread>: New field.
(set_step_over_info): New argument 'thread'. Callers updated.
(clear_step_over_info): Set field thread to -1.
(thread_is_stepping_over_breakpoint): New function.
* infrun.h (thread_is_stepping_over_breakpoint): Declaration.
|
|
On GNU/Linux archs that support displaced stepping, if /proc is not
mounted, GDB gets stuck not able to step past breakpoints:
(gdb) c
Continuing.
dl_main (phdr=<optimized out>, phnum=<optimized out>, user_entry=<optimized out>, auxv=<optimized out>) at rtld.c:2163
2163 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot find AT_ENTRY auxiliary vector entry.
(gdb) c
Continuing.
dl_main (phdr=<optimized out>, phnum=<optimized out>, user_entry=<optimized out>, auxv=<optimized out>) at rtld.c:2163
2163 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot find AT_ENTRY auxiliary vector entry.
(gdb)
That's because GDB can't figure out where the scratch pad is.
This is a regression introduced by the earlier changes to make the
Linux native target always work in non-stop mode.
This commit makes GDB detect the case and fallback to stepping over
breakpoints in-line.
gdb/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* infrun.c (displaced_step_prepare): Also disable displaced
stepping on NOT_SUPPORTED_ERROR.
* linux-tdep.c (linux_displaced_step_location): If reading auxv
fails, throw NOT_SUPPORTED_ERROR instead of generic error.
|
|
With Intel Memory Protection Extensions it was introduced the concept of
boundary violation. A boundary violations is presented to the inferior as
a segmentation fault having SIGCODE 3. This patch adds a
handler for a boundary violation extending the information displayed
when a bound violation is presented to the inferior. In the stop mode
case the debugger will also display the kind of violation: "upper" or
"lower", bounds and the address accessed.
On no stop mode the information will still remain unchanged. Additional
information about bound violations are not meaningful in that case user
does not know the line in which violation occurred as well.
When the segmentation fault handler is stop mode the out puts will be
changed as exemplified below.
The usual output of a segfault is:
Program received signal SIGSEGV, Segmentation fault
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In case it is a bound violation it will be presented as:
Program received signal SIGSEGV, Segmentation fault
Upper bound violation while accessing address 0x7fffffffc3b3
Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3]
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In mi mode the output of a segfault is:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c",
func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"}
,{name="b",value="0x603050"}, {name="c",value="0x603070"},
{name="d",value="0x603090"},{name="len",value="7"}],
file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"},
thread-id="1",stopped-threads="all",core="6"
in the case of a bound violation:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault",
sigcode-meaning="Upper bound violation",
lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f",
frame={addr="0x0000000000400d7c",func="upper",args=[{name="p",
value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"},
{name="c",value="0x603070"},{name="d",value="0x603090"},
{name="len",value="7"}],file="i386-mpx-sigsegv.c",
fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1",
stopped-threads="all",core="6"
2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* NEWS: Add entry for bound violation.
* amd64-linux-tdep.c (amd64_linux_init_abi_common):
Add handler for segmentation fault.
* gdbarch.sh (handle_segmentation_fault): New.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
(SIG_CODE_BONDARY_FAULT): New define.
(i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
* i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* infrun.c (handle_segmentation_fault): New function.
(print_signal_received_reason): Use handle_segmentation_fault.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-mpx-sigsegv.c: New file.
* gdb.arch/i386-mpx-sigsegv.exp: New file.
* gdb.arch/i386-mpx-simple_segv.c: New file.
* gdb.arch/i386-mpx-simple_segv.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Signals): Add bound violation display hints for
a SIGSEGV.
|
|
If you have "set follow-fork child" set, then if you do "info threads"
right after a fork, and before the child reports any other event to
GDB core, you'll see:
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 31875) "fork-plus-threa" (running)
2.1 process 31879 "fork-plus-threa" Selected thread is running.
(gdb)
The "Selected thread is running." bit is a bogus error. That was GDB
trying to fetch the current frame of thread 2.1, because the external
runnning state is "stopped", and then throwing an error because the
thread is actually running.
This actually affects all-stop + schedule-multiple as well.
The problem here is that on a fork event, GDB doesn't update the
external parent/child running states.
New comprehensive test included. The "kill inferior 1" / "kill
inferior 2" bits also trip on PR gdb/19494 (hang killing unfollowed
fork children), which was fixed by the previous patch.
gdb/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* infrun.c (handle_inferior_event_1) <fork/vfork>: Update
parent/child running states.
gdb/testsuite/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* gdb.base/fork-running-state.c: New file.
* gdb.base/fork-running-state.exp: New file.
|
|
This commit changes GDB like this:
- Program received signal SIGINT, Interrupt.
+ Thread 1 "main" received signal SIGINT, Interrupt.
- Breakpoint 1 at 0x40087a: file threads.c, line 87.
+ Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87.
... once the program goes multi-threaded. Until GDB sees a second
thread spawn, the output is still the same as before, per the
discussion back in 2012:
https://www.sourceware.org/ml/gdb/2012-11/msg00010.html
This helps non-stop mode, where you can't easily tell which thread hit
a breakpoint or received a signal:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running)
3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running)
(gdb)
Program received signal SIGUSR1, User defined signal 1.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
(gdb) b threads.c:87
Breakpoint 1 at 0x40087a: file threads.c, line 87.
(gdb)
Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
The best the user can do is run "info threads" and try to figure
things out.
It actually also affects all-stop mode, in case of "handle SIG print
nostop":
...
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
...
The above doesn't give any clue that these were different threads
getting the SIGUSR1 signal.
I initially thought of lowercasing "breakpoint" in
"Thread 3 hit Breakpoint 1"
but then after trying it I realized that leaving "Breakpoint"
uppercase helps the eye quickly find the relevant information. It's
also easier to implement not showing anything about threads until the
program goes multi-threaded this way.
Here's a larger example session in non-stop mode:
(gdb) c -a&
Continuing.
(gdb) interrupt -a
(gdb)
Thread 1 "main" stopped.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
Thread 2 "foo" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
Thread 3 "bar" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
b threads.c:87
Breakpoint 4 at 0x40087a: file threads.c, line 87.
(gdb) b threads.c:67
Breakpoint 5 at 0x400811: file threads.c, line 67.
(gdb) c -a&
Continuing.
(gdb)
Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) shell kill -SIGINT 31957
(gdb)
Thread 1 "main" received signal SIGINT, Interrupt.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) t 2
[Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)]
#0 thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
(gdb) catch syscall
Catchpoint 6 (any syscall)
(gdb) c&
Continuing.
(gdb)
Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
I'll work on documentation next if this looks agreeable.
This patch applies on top of the star wildcards thread IDs series:
https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html
For convenience, I've pushed this to the
users/palves/show-which-thread-caused-stop branch.
gdb/doc/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Mention that GDB displays the ID and name
of the thread that hit a breakpoint or received a signal.
gdb/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
gdb/testsuite/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.base/async-shell.exp: Adjust expected output.
* gdb.base/dprintf-non-stop.exp: Adjust expected output.
* gdb.base/siginfo-thread.exp: Adjust expected output.
* gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
* gdb.java/jnpe.exp: Adjust expected output.
* gdb.threads/clone-new-thread-event.exp: Adjust expected output.
* gdb.threads/continue-pending-status.exp: Adjust expected output.
* gdb.threads/leader-exit.exp: Adjust expected output.
* gdb.threads/manythreads.exp: Adjust expected output.
* gdb.threads/pthreads.exp: Adjust expected output.
* gdb.threads/schedlock.exp: Adjust expected output.
* gdb.threads/siginfo-threads.exp: Adjust expected output.
* gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
expected output.
* gdb.threads/signal-delivered-right-thread.exp: Adjust expected
output.
* gdb.threads/sigthread.exp: Adjust expected output.
* gdb.threads/watchpoint-fork.exp: Adjust expected output.
|
|
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
|
|
Add a new function to print a thread ID, in the style of paddress,
plongest, etc. and adjust all CLI-reachable paths to use it.
This gives us a single place to tweak to print inferior-qualified
thread IDs later:
- [Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 8155))]
+ [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
etc., though for now, this has no user-visible change.
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_threaded_breakpoints)
(print_one_breakpoint_location): Use print_thread_id.
* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
(btrace_fetch, btrace_clear): Use print_thread_id.
* common/print-utils.c (CELLSIZE): Delete.
(get_cell): Rename to ...
(get_print_cell): ... this and made extern. Adjust call callers.
Adjust to use PRINT_CELL_SIZE.
* common/print-utils.h (get_print_cell): Declare.
(PRINT_CELL_SIZE): New.
* gdbthread.h (print_thread_id): Declare.
* infcmd.c (signal_command): Use print_thread_id.
* inferior.c (print_inferior): Use print_thread_id.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe)
(print_signal_received_reason): Use print_thread_id.
* record-btrace.c (record_btrace_info)
(record_btrace_resume_thread, record_btrace_cancel_resume)
(record_btrace_step_thread, record_btrace_wait): Use
print_thread_id.
* thread.c (thread_apply_all_command): Use print_thread_id.
(print_thread_id): New function.
(thread_apply_command): Use print_thread_id.
(thread_command, thread_find_command, do_captured_thread_select):
Use print_thread_id.
|
|
This commit merges both the registers and $_siginfo "thread
running/executing" checks into a single function.
Accessing $_siginfo from a "catch signal" breakpoint condition doesn't
work. The condition always fails with "Selected thread is running":
(gdb) catch signal
Catchpoint 3 (standard signals)
(gdb)
condition $bpnum $_siginfo.si_signo == 5
(gdb) continue
Continuing.
Error in testing breakpoint condition:
Selected thread is running.
Catchpoint 3 (signal SIGUSR1), 0x0000003615e35877 in __GI_raise (sig=10) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(gdb)
When accessing the $_siginfo object, we check whether the thread is
marked running (external/public) state and refuse the access if so.
This is so "print $_siginfo" at the prompt fails nicelly when the
current thread is running. While evaluating breakpoint conditionals,
we haven't decided yet whether the thread is going to stop, so
is_running still returns true, and we thus always error out.
Evaluating an expression that requires registers access is really
conceptually the same -- we could think of $_siginfo as a pseudo
register. However, in that case we check whether the thread is marked
executing (internal/private state), not running (external/public
state). Changing the $_siginfo validation to check is_executing as
well fixes the bug in question.
Note that checking is_executing is not fully correct, not even for
registers. See PR 19389. However, I think this is the lesser of two
evils and ends up as an improvement. We at least now have a single
place to fix.
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* frame.c (get_current_frame): Use validate_registers_access.
* gdbthread.h (validate_registers_access): Declare.
* infrun.c (validate_siginfo_access): Delete.
(siginfo_value_read, siginfo_value_write): Use
validate_registers_access.
* thread.c (validate_registers_access): New function.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* gdb.base/catch-signal-siginfo-cond.c: New file.
* gdb.base/catch-signal-siginfo-cond.exp: New file.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
Running the testsuite against gdbserver with "maint set target-non-stop on"
stumbled on a set of problems. See code comments for details.
This handles my concerns expressed in PR14618.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* infrun.c (handle_no_resumed): New function.
(handle_inferior_event_1) <TARGET_WAITKIND_NO_RESUMED>: Defer to
handle_no_resumed.
|
|
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
|
|
This is the first pass at implementing support for all-stop mode
running against the remote target using the non-stop variant of the
protocol.
The trickiest part here is the initial connection setup/synching. We
need to fetch all inferiors' target descriptions etc. before stopping
threads, because stop_all_threads needs to read the threads' registers
(to record each thread's stop_pc). But OTOH, the initial inferior
setup (target_post_attach, post_create_inferior, etc.), only works
correctly if the inferior is stopped... So I've split that initial
setup part from attach_command_post_wait to a separate function, and
added a "still needs setup" flag to the inferior structure. This is
similar to gdbserver/linux-low.c's handling of discovering the
process's target description). Then if on connection all threads of
the remote inferior are running, when we go about stopping them, as
soon as they stop we call setup_inferior, from within
stop_all_threads.
Also, in all-stop, we need to process all the initial stop replies to
learn about all the pending signal the threads may already be stopped
for, and pick the one to report as current. This is exposed by
gdb.threads/reconnect-signal.exp.
gdb/
2015-11-30 Pedro Alves <palves@redhat.com>
* gdbthread.h (switch_to_thread_no_regs): Declare.
* infcmd.c (setup_inferior): New function, factored out from ...
(attach_command_post_wait): ... this. Rename to ...
(attach_post_wait): ... this. Replace parameter async_exec with
attach_post_wait_mode parameter. Adjust.
(enum attach_post_wait_mode): New enum.
(struct attach_command_continuation_args): Replace 'async_exec'
field with 'mode' field.
(attach_command_continuation): Adjust.
(attach_command): Add comment. Mark the inferior as needing
setup. Adjust to use enum attach_post_wait_mode.
(notice_new_inferior): Use switch_to_thread_no_regs. Adjust to
use enum attach_post_wait_mode.
* inferior.h (setup_inferior): Declare.
(struct inferior) <needs_setup>: New field.
* infrun.c (set_last_target_status): Make extern.
(stop_all_threads): Make extern. Setup inferior, if necessary.
* infrun.h (set_last_target_status, stop_all_threads): Declare.
* remote-notif.c (remote_async_get_pending_events_handler)
(handle_notification): Replace non_stop checks with
target_is_non_stop_p() checks.
* remote.c (remote_notice_new_inferior): Remove non_stop check.
(remote_update_thread_list): Replace non_stop check with
target_is_non_stop_p() check.
(print_one_stopped_thread): New function.
(process_initial_stop_replies): New 'from_tty' parameter.
"Notice" all new live inferiors after storing initial stops as
pending status in each corresponding thread. If all-stop, stop
all threads, try picking a signalled thread as current, and print
the status of that one thread. Record the last target status.
(remote_start_remote): Replace non_stop checks with
target_is_non_stop_p() checks. Don't query for the remote current
thread of use qOffsets here. Pass from_tty to
process_initial_stop_replies.
(extended_remote_attach): Replace non_stop checks with
target_is_non_stop_p() checks.
(extended_remote_post_attach): Send qOffsets here.
(remote_vcont_resume, remote_resume, remote_stop)
(remote_interrupt, remote_parse_stop_reply, remote_wait): Replace
non_stop checks with target_is_non_stop_p() checks.
(remote_async): If target is non-stop, mark/clear the pending
events token.
* thread.c (switch_to_thread_no_regs): New function.
|
|
Hi,
Some tests in gdb.threads/multiple-step-overs.exp fail on arm target
when the displaced stepping on, but they pass when displaced stepping
is off.
FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
when displaced stepping is on,
Sending packet: $vCont;c#a8...infrun: infrun_async(1)^M <--- [1]
infrun: prepare_to_wait^M
infrun: target_wait (-1.0.0, status) =^M
infrun: -1.0.0 [Thread 0],^M
infrun: status->kind = ignore^M
infrun: TARGET_WAITKIND_IGNORE^M
infrun: prepare_to_wait^M
Packet received: T05swbreak:;0b:f8faffbe;0d:409ee7b6;0f:d0880000;thread:p635.636;core:0;^M
infrun: target_wait (-1.0.0, status) =^M
infrun: 1589.1590.0 [Thread 1590],^M
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP^M
infrun: TARGET_WAITKIND_STOPPED^M
infrun: stop_pc = 0x88d0^M
infrun: context switch^M
infrun: Switching context from Thread 1591 to Thread 1590^
GDB resumes the whole process (all threads) rather than the specific
thread for which GDB wants to step over the breakpoint (as shown in [1]).
That is wrong because we resume a single thread and leave others stopped
when doing a normal step over where we temporarily remove the breakpoint,
single-step, reinsert the breakpoint, is that if we let other threads run
in the period while the breakpoint is removed, then these other threads
could miss the breakpoint. Since with displaced stepping, we don't ever
remove the breakpoint, it should be fine to let other threads run. However,
there's another reason that we should not let other threads run: that is
the case where some of those threads are also stopped for a breakpoint that
itself needs to be stepped over. If we just let those threads run, then
they immediately re-trap their breakpoint again.
when displaced stepping is off, GDB behaves correctly, only resumes
the specific thread (as shown in [2]).
Sending packet: $vCont;c:p611.613#b2...infrun: infrun_async(1)^M <-- [2]
infrun: prepare_to_wait^M
infrun: target_wait (-1.0.0, status) =^M
infrun: -1.0.0 [Thread 0],^M
infrun: status->kind = ignore^M
infrun: TARGET_WAITKIND_IGNORE^M
infrun: prepare_to_wait^M
Packet received: T05swbreak:;0b:f8faffbe;0d:409e67b6;0f:48880000;thread:p611.613;core:1;^M
infrun: target_wait (-1.0.0, status) =^M
infrun: 1553.1555.0 [Thread 1555],^M
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP^M
infrun: TARGET_WAITKIND_STOPPED^M
infrun: clear_step_over_info^M
infrun: stop_pc = 0x8848
The current logic in GDB on deciding the set of threads to resume is:
/* Decide the set of threads to ask the target to resume. */
if ((step || thread_has_single_step_breakpoints_set (tp))
&& tp->control.trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
hit, by single-stepping the thread with the breakpoint
removed. In which case, we need to single-step only this
thread, and keep others stopped, as they can miss this
breakpoint if allowed to run. */
resume_ptid = inferior_ptid;
}
else
resume_ptid = internal_resume_ptid (user_step);
it doesn't handle the case correctly that GDB continue (instead of
single step) the thread for displaced stepping.
I also update the comment below to reflect the code. I remove the
"with the breakpoint removed" comment, because GDB doesn't remove
breakpoints in displaced stepping, so we don't have to worry that
other threads may miss the breakpoint.
Patch is regression tested on both x86_64-linux and arm-linux.
gdb:
2015-11-17 Yao Qi <yao.qi@linaro.org>
* infrun.c (resume): Check control.trap_expected only
when deciding the set of threads to resume.
|
|
This patch fixes C++ build errors like this:
/home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive]
| COREFILTER_HUGETLB_PRIVATE);
^
This is a case of enums used as bit flags. Unlike "regular" enums,
these values are supposed to be or'ed together. However, in C++, the
type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to
an enum variable without a cast. That means that this:
enum foo_flags flags = 0;
if (...)
flags |= FOO_FLAG1;
if (...)
flags |= FOO_FLAG2;
... would have to be written as:
enum foo_flags flags = (enum foo_flags) 0;
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG1);
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG2);
which is ... ugly. Alternatively, we'd have to use an int for the
variable's type, which isn't ideal either.
This patch instead adds an "enum flags" class. "enum flags" are
exactly the enums where the values are bits that are meant to be ORed
together.
This allows writing code like the below, while with raw enums this
would fail to compile without casts to enum type at the assignments to
'f':
enum some_flag
{
flag_val1 = 1 << 1,
flag_val2 = 1 << 2,
flag_val3 = 1 << 3,
flag_val4 = 1 << 4,
};
DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags)
some_flags f = flag_val1 | flag_val2;
f |= flag_val3;
It's also possible to assign literal zero to an enum flags variable
(meaning, no flags), dispensing either adding an awkward explicit "no
value" value to the enumeration or the cast to assignments from 0.
For example:
some_flags f = 0;
f |= flag_val3 | flag_val4;
Note that literal integers other than zero do fail to compile:
some_flags f = 1; // error
C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that
case.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* btrace.h: Include common/enum-flags.h.
(btrace_insn_flags): Define.
(struct btrace_insn) <flags>: Change type.
(btrace_function_flags): Define.
(struct btrace_function) <flags>: Change type.
(btrace_thread_flags): Define.
(struct btrace_thread_info) <flags>: Change type.
* c-exp.y (token_flags): Rename to ...
(token_flag): ... this.
(token_flags): Define.
(struct token) <flags>: Change type.
* common/enum-flags.h: New file.
* compile/compile-c-types.c (convert_qualified): Change type of
'quals' local.
* compile/compile-internal.h: Include "common/enum-flags.h".
(gcc_qualifiers_flags): Define.
* completer.c (enum reg_completer_targets): Rename to ...
(enum reg_completer_target): ... this.
(reg_completer_targets): Define.
(reg_or_group_completer_1): Change type of 'targets' parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Change type
of 'psl_flags' local.
(do_mixed_source_and_assembly): Change type of 'psl_flags' local.
* infrun.c: Include "common/enum-flags.h".
(enum step_over_what): Rename to ...
(enum step_over_what_flag): ... this.
(step_over_what): Change type.
(start_step_over): Change type of 'step_what' local.
(thread_still_needs_step_over): Now returns a step_over_what.
Adjust.
(keep_going_pass_signal): Change type of 'step_what' local.
* linux-tdep.c: Include "common/enum-flags.h".
(enum filterflags): Rename to ...
(enum filter_flag): ... this.
(filter_flags): Define.
(dump_mapping_p): Change type of 'filterflags' parameter.
(linux_find_memory_regions_full): Change type of 'filterflags'
local.
(linux_find_memory_regions_full): Pass the address of an unsigned
int to sscanf instead of the address of an enum.
* record-btrace.c (btrace_print_lines): Change type of local
'psl_flags'.
(btrace_call_history): Replace 'flags' parameter
with 'int_flags' parameter. Adjust.
(record_btrace_call_history, record_btrace_call_history_range)
(record_btrace_call_history_from): Rename 'flags' parameter to
'int_flags'. Use record_print_flags.
* record.h: Include "common/enum-flags.h".
(record_print_flags): Define.
* source.c: Include "common/enum-flags.h".
(print_source_lines_base, print_source_lines): Change type of
flags parameter.
* symtab.h: Include "common/enum-flags.h".
(enum print_source_lines_flags): Rename to ...
(enum print_source_lines_flag): ... this.
(print_source_lines_flags): Define.
(print_source_lines): Change prototype.
|
|
This patch adds a new function displaced_step_in_progress_thread,
which returns whether the thread is in progress of displaced
stepping.
gdb:
2015-11-09 Yao Qi <yao.qi@linaro.org>
* infrun.c (displaced_step_in_progress_thread): New function.
(handle_inferior_event_1): Call it.
|
|
Assuming displaced stepping is enabled, and a breakpoint is set in the
memory region of the scratch pad, things break. One of two cases can
happen:
#1 - The breakpoint wasn't inserted yet (all threads were stopped), so
after setting up the displaced stepping scratch pad with the
adjusted copy of the instruction we're trying to single-step, we
insert the breakpoint, which corrupts the scratch pad, and the
inferior executes the wrong instruction. (Example below.)
This is clearly unacceptable.
#2 - The breakpoint was already inserted, so setting up the displaced
stepping scratch pad overwrites the breakpoint. This is OK in
the sense that we already assume that no thread is going to
executes the code in the scratch pad range (after initial
startup) anyway.
This commit addresses both cases by simply punting on displaced
stepping if we have a breakpoint in the scratch pad range.
The #1 case above explains a few regressions exposed by the AS/NS
series on x86:
Running ./gdb.dwarf2/callframecfa.exp ...
FAIL: gdb.dwarf2/callframecfa.exp: set display for call-frame-cfa
FAIL: gdb.dwarf2/callframecfa.exp: step 1 for call-frame-cfa
FAIL: gdb.dwarf2/callframecfa.exp: step 2 for call-frame-cfa
FAIL: gdb.dwarf2/callframecfa.exp: step 3 for call-frame-cfa
FAIL: gdb.dwarf2/callframecfa.exp: step 4 for call-frame-cfa
Running ./gdb.dwarf2/typeddwarf.exp ...
FAIL: gdb.dwarf2/typeddwarf.exp: continue to breakpoint: continue to typeddwarf.c:53
FAIL: gdb.dwarf2/typeddwarf.exp: check value of x at typeddwarf.c:53
FAIL: gdb.dwarf2/typeddwarf.exp: check value of y at typeddwarf.c:53
FAIL: gdb.dwarf2/typeddwarf.exp: check value of z at typeddwarf.c:53
FAIL: gdb.dwarf2/typeddwarf.exp: continue to breakpoint: continue to typeddwarf.c:73
FAIL: gdb.dwarf2/typeddwarf.exp: check value of w at typeddwarf.c:73
FAIL: gdb.dwarf2/typeddwarf.exp: check value of x at typeddwarf.c:73
FAIL: gdb.dwarf2/typeddwarf.exp: check value of y at typeddwarf.c:73
FAIL: gdb.dwarf2/typeddwarf.exp: check value of z at typeddwarf.c:73
Enabling "maint set target-non-stop on" implies displaced stepping
enabled as well, and it's the latter that's to blame here. We can see
the same failures with "maint set target-non-stop off + set displaced
on".
Diffing (good/bad) gdb.log for callframecfa.exp shows:
@@ -99,29 +99,29 @@ Breakpoint 2 at 0x80481b0: file q.c, lin
continue
Continuing.
-Breakpoint 2, func (arg=77) at q.c:2
+Breakpoint 2, func (arg=52301) at q.c:2
2 in q.c
(gdb) PASS: gdb.dwarf2/callframecfa.exp: continue to breakpoint: continue to breakpoint for call-frame-cfa
display arg
-1: arg = 77
-(gdb) PASS: gdb.dwarf2/callframecfa.exp: set display for call-frame-cfa
+1: arg = 52301
+(gdb) FAIL: gdb.dwarf2/callframecfa.exp: set display for call-frame-cfa
The problem is here, when setting up the func call:
Breakpoint 1, main (argc=-13345, argv=0x0) at q.c:7
7 in q.c
(gdb) disassemble
Dump of assembler code for function main:
0x080481bb <+0>: push %ebp
0x080481bc <+1>: mov %esp,%ebp
0x080481be <+3>: sub $0x4,%esp
=> 0x080481c1 <+6>: movl $0x4d,(%esp)
0x080481c8 <+13>: call 0x80481b0 <func>
0x080481cd <+18>: leave
0x080481ce <+19>: ret
End of assembler dump.
(gdb) disassemble /r
Dump of assembler code for function main:
0x080481bb <+0>: 55 push %ebp
0x080481bc <+1>: 89 e5 mov %esp,%ebp
0x080481be <+3>: 83 ec 04 sub $0x4,%esp
=> 0x080481c1 <+6>: c7 04 24 4d 00 00 00 movl $0x4d,(%esp)
0x080481c8 <+13>: e8 e3 ff ff ff call 0x80481b0 <func>
0x080481cd <+18>: c9 leave
0x080481ce <+19>: c3 ret
End of assembler dump.
Note the breakpoint at main is set at 0x080481c1. Right at the
instruction that sets up func's argument. Executing that instruction
should write 0x4d to the address pointed at by $esp. However, if we
stepi, the program manages to write 52301/0xcc4d there instead (0xcc
is int3, the x86 breakpoint instruction), because the breakpoint
address is 4 bytes inside the scratch pad location, which is
0x080481bd:
(gdb) p 0x080481c1 - 0x080481bd
$1 = 4
IOW, instead of executing:
"c7 04 24 4d 00 00 00" [ movl $0x4d,(%esp) ]
the inferior executes:
"c7 04 24 4d cc 00 00" [ movl $0xcc4d,(%esp) ]
gdb/ChangeLog:
2015-10-30 Pedro Alves <palves@redhat.com>
* breakpoint.c (breakpoint_in_range_p)
(breakpoint_location_address_range_overlap): New functions.
* breakpoint.h (breakpoint_in_range_p): New declaration.
* infrun.c (displaced_step_prepare_throw): If there's a breakpoint
in the scratch pad range, don't displaced step.
|
|
No longer used anywhere.
gdb/ChangeLog:
2015-10-22 Pedro Alves <palves@redhat.com>
* infrun.c (stop_after_trap): Delete.
(clear_proceed_status, handle_signal_stop, struct
infcall_control_state, save_infcall_control_state)
(restore_infcall_control_state): Remove references to
stop_after_trap.
|
|
This fixes a few build errors like these in C++ mode:
src/gdb/reverse.c: In function ‘void exec_reverse_once(char*, char*, int)’:
src/gdb/reverse.c:49:34: error: invalid conversion from ‘int’ to ‘exec_direction_kind’ [-fpermissive]
enum exec_direction_kind dir = execution_direction;
^
make: *** [reverse.o] Error 1
gdb/ChangeLog:
2015-10-13 Pedro Alves <palves@redhat.com>
* infrun.c (restore_execution_direction): New function.
(fetch_inferior_event): Use it instead of
make_cleanup_restore_integer.
(execution_direction): Change type to enum
exec_direction_kind.
* infrun.h (execution_direction): Likewise.
|
|
Note: I needed to split this patch in two, otherwise it's too big for
the mailing list.
This patch adds explicit casts to situations where a void pointer is
assigned to a pointer to the "real" type. Building in C++ mode requires
those assignments to use an explicit cast. This includes, for example:
- callback arguments (cleanups, comparison functions, ...)
- data attached to some object (objfile, program space, etc) in the form
of a void pointer
- "user data" passed to some function
This patch comes from the commit "(mostly) auto-generated patch to insert
casts needed for C++", taken from Pedro's C++ branch.
Only files built on x86 with --enable-targets=all are modified, so the
native files for other arches will need to be dealt with separately.
I built-tested this with --enable-targets=all and reg-tested. To my
surprise, a test case (selftest.exp) had to be adjusted.
Here's the ChangeLog entry. Again, this was relatively quick to make
despite the length, thanks to David Malcom's script, although I don't
believe it's very useful information in that particular case...
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_make_prologue_cache): Add cast(s).
(aarch64_make_stub_cache): Likewise.
(value_of_aarch64_user_reg): Likewise.
* ada-lang.c (ada_inferior_data_cleanup): Likewise.
(get_ada_inferior_data): Likewise.
(get_ada_pspace_data): Likewise.
(ada_pspace_data_cleanup): Likewise.
(ada_complete_symbol_matcher): Likewise.
(ada_exc_search_name_matches): Likewise.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* addrmap.c (addrmap_mutable_foreach_worker): Likewise.
(splay_obstack_alloc): Likewise.
(splay_obstack_free): Likewise.
* alpha-linux-tdep.c (alpha_linux_supply_gregset): Likewise.
(alpha_linux_collect_gregset): Likewise.
(alpha_linux_supply_fpregset): Likewise.
(alpha_linux_collect_fpregset): Likewise.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise.
* alpha-tdep.c (alpha_lds): Likewise.
(alpha_sts): Likewise.
(alpha_sigtramp_frame_unwind_cache): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_supply_int_regs): Likewise.
(alpha_fill_int_regs): Likewise.
(alpha_supply_fp_regs): Likewise.
(alpha_fill_fp_regs): Likewise.
* alphanbsd-tdep.c (alphanbsd_supply_fpregset): Likewise.
(alphanbsd_aout_supply_gregset): Likewise.
(alphanbsd_supply_gregset): Likewise.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
(amd64_x32_linux_init_abi): Likewise.
* amd64-nat.c (amd64_supply_native_gregset): Likewise.
(amd64_collect_native_gregset): Likewise.
* amd64-tdep.c (amd64_frame_cache): Likewise.
(amd64_sigtramp_frame_cache): Likewise.
(amd64_epilogue_frame_cache): Likewise.
(amd64_supply_fxsave): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_fxsave): Likewise.
(amd64_collect_xsave): Likewise.
* amd64-windows-tdep.c (amd64_windows_frame_cache): Likewise.
* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
(arm_linux_collect_gregset): Likewise.
(arm_linux_supply_nwfpe): Likewise.
(arm_linux_collect_nwfpe): Likewise.
(arm_linux_supply_vfp): Likewise.
(arm_linux_collect_vfp): Likewise.
* arm-tdep.c (arm_find_mapping_symbol): Likewise.
(arm_prologue_unwind_stop_reason): Likewise.
(arm_prologue_this_id): Likewise.
(arm_prologue_prev_register): Likewise.
(arm_exidx_data_free): Likewise.
(arm_find_exidx_entry): Likewise.
(arm_stub_this_id): Likewise.
(arm_m_exception_this_id): Likewise.
(arm_m_exception_prev_register): Likewise.
(arm_normal_frame_base): Likewise.
(gdb_print_insn_arm): Likewise.
(arm_objfile_data_free): Likewise.
(arm_record_special_symbol): Likewise.
(value_of_arm_user_reg): Likewise.
* armbsd-tdep.c (armbsd_supply_fpregset): Likewise.
(armbsd_supply_gregset): Likewise.
* auto-load.c (auto_load_pspace_data_cleanup): Likewise.
(get_auto_load_pspace_data): Likewise.
(hash_loaded_script_entry): Likewise.
(eq_loaded_script_entry): Likewise.
(clear_section_scripts): Likewise.
(collect_matching_scripts): Likewise.
* auxv.c (auxv_inferior_data_cleanup): Likewise.
(get_auxv_inferior_data): Likewise.
* avr-tdep.c (avr_frame_unwind_cache): Likewise.
* ax-general.c (do_free_agent_expr_cleanup): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
(target_bfd_xclose): Likewise.
(target_bfd_get_section_table): Likewise.
* bfin-tdep.c (bfin_frame_cache): Likewise.
* block.c (find_block_in_blockvector): Likewise.
(call_site_for_pc): Likewise.
(block_find_non_opaque_type_preferred): Likewise.
* break-catch-sig.c (signal_catchpoint_insert_location): Likewise.
(signal_catchpoint_remove_location): Likewise.
(signal_catchpoint_breakpoint_hit): Likewise.
(signal_catchpoint_print_one): Likewise.
(signal_catchpoint_print_mention): Likewise.
(signal_catchpoint_print_recreate): Likewise.
* break-catch-syscall.c (get_catch_syscall_inferior_data): Likewise.
* breakpoint.c (do_cleanup_counted_command_line): Likewise.
(bp_location_compare_addrs): Likewise.
(get_first_locp_gte_addr): Likewise.
(check_tracepoint_command): Likewise.
(do_map_commands_command): Likewise.
(get_breakpoint_objfile_data): Likewise.
(free_breakpoint_probes): Likewise.
(do_captured_breakpoint_query): Likewise.
(compare_breakpoints): Likewise.
(bp_location_compare): Likewise.
(bpstat_remove_breakpoint_callback): Likewise.
(do_delete_breakpoint_cleanup): Likewise.
* bsd-uthread.c (bsd_uthread_set_supply_uthread): Likewise.
(bsd_uthread_set_collect_uthread): Likewise.
(bsd_uthread_activate): Likewise.
(bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* btrace.c (check_xml_btrace_version): Likewise.
(parse_xml_btrace_block): Likewise.
(parse_xml_btrace_pt_config_cpu): Likewise.
(parse_xml_btrace_pt_raw): Likewise.
(parse_xml_btrace_pt): Likewise.
(parse_xml_btrace_conf_bts): Likewise.
(parse_xml_btrace_conf_pt): Likewise.
(do_btrace_data_cleanup): Likewise.
* c-typeprint.c (find_typedef_for_canonicalize): Likewise.
* charset.c (cleanup_iconv): Likewise.
(do_cleanup_iterator): Likewise.
* cli-out.c (cli_uiout_dtor): Likewise.
(cli_table_begin): Likewise.
(cli_table_body): Likewise.
(cli_table_end): Likewise.
(cli_table_header): Likewise.
(cli_begin): Likewise.
(cli_end): Likewise.
(cli_field_int): Likewise.
(cli_field_skip): Likewise.
(cli_field_string): Likewise.
(cli_field_fmt): Likewise.
(cli_spaces): Likewise.
(cli_text): Likewise.
(cli_message): Likewise.
(cli_wrap_hint): Likewise.
(cli_flush): Likewise.
(cli_redirect): Likewise.
(out_field_fmt): Likewise.
(field_separator): Likewise.
(cli_out_set_stream): Likewise.
* cli/cli-cmds.c (compare_symtabs): Likewise.
* cli/cli-dump.c (call_dump_func): Likewise.
(restore_section_callback): Likewise.
* cli/cli-script.c (clear_hook_in_cleanup): Likewise.
(do_restore_user_call_depth): Likewise.
(do_free_command_lines_cleanup): Likewise.
* coff-pe-read.c (get_section_vmas): Likewise.
(pe_as16): Likewise.
(pe_as32): Likewise.
* coffread.c (coff_symfile_read): Likewise.
* common/agent.c (agent_look_up_symbols): Likewise.
* common/filestuff.c (do_close_cleanup): Likewise.
* common/format.c (free_format_pieces_cleanup): Likewise.
* common/vec.c (vec_o_reserve): Likewise.
* compile/compile-c-support.c (print_one_macro): Likewise.
* compile/compile-c-symbols.c (hash_symbol_error): Likewise.
(eq_symbol_error): Likewise.
(del_symbol_error): Likewise.
(error_symbol_once): Likewise.
(gcc_convert_symbol): Likewise.
(gcc_symbol_address): Likewise.
(hash_symname): Likewise.
(eq_symname): Likewise.
* compile/compile-c-types.c (hash_type_map_instance): Likewise.
(eq_type_map_instance): Likewise.
(insert_type): Likewise.
(convert_type): Likewise.
* compile/compile-object-load.c (munmap_listp_free_cleanup): Likewise.
(setup_sections): Likewise.
(link_hash_table_free): Likewise.
(copy_sections): Likewise.
* compile/compile-object-run.c (do_module_cleanup): Likewise.
* compile/compile.c (compile_print_value): Likewise.
(do_rmdir): Likewise.
(cleanup_compile_instance): Likewise.
(cleanup_unlink_file): Likewise.
* completer.c (free_completion_tracker): Likewise.
* corelow.c (add_to_spuid_list): Likewise.
* cp-namespace.c (reset_directive_searched): Likewise.
* cp-support.c (reset_directive_searched): Likewise.
* cris-tdep.c (cris_sigtramp_frame_unwind_cache): Likewise.
(cris_frame_unwind_cache): Likewise.
* d-lang.c (builtin_d_type): Likewise.
* d-namespace.c (reset_directive_searched): Likewise.
* dbxread.c (dbx_free_symfile_info): Likewise.
(do_free_bincl_list_cleanup): Likewise.
* disasm.c (hash_dis_line_entry): Likewise.
(eq_dis_line_entry): Likewise.
(dis_asm_print_address): Likewise.
(fprintf_disasm): Likewise.
(do_ui_file_delete): Likewise.
* doublest.c (convert_floatformat_to_doublest): Likewise.
* dummy-frame.c (pop_dummy_frame_bpt): Likewise.
(dummy_frame_prev_register): Likewise.
(dummy_frame_this_id): Likewise.
* dwarf2-frame-tailcall.c (cache_hash): Likewise.
(cache_eq): Likewise.
(cache_find): Likewise.
(tailcall_frame_this_id): Likewise.
(dwarf2_tailcall_prev_register_first): Likewise.
(tailcall_frame_prev_register): Likewise.
(tailcall_frame_dealloc_cache): Likewise.
(tailcall_frame_prev_arch): Likewise.
* dwarf2-frame.c (dwarf2_frame_state_free): Likewise.
(dwarf2_frame_set_init_reg): Likewise.
(dwarf2_frame_init_reg): Likewise.
(dwarf2_frame_set_signal_frame_p): Likewise.
(dwarf2_frame_signal_frame_p): Likewise.
(dwarf2_frame_set_adjust_regnum): Likewise.
(dwarf2_frame_adjust_regnum): Likewise.
(clear_pointer_cleanup): Likewise.
(dwarf2_frame_cache): Likewise.
(find_cie): Likewise.
(dwarf2_frame_find_fde): Likewise.
* dwarf2expr.c (dwarf_expr_address_type): Likewise.
(free_dwarf_expr_context_cleanup): Likewise.
* dwarf2loc.c (locexpr_find_frame_base_location): Likewise.
(locexpr_get_frame_base): Likewise.
(loclist_find_frame_base_location): Likewise.
(loclist_get_frame_base): Likewise.
(dwarf_expr_dwarf_call): Likewise.
(dwarf_expr_get_base_type): Likewise.
(dwarf_expr_push_dwarf_reg_entry_value): Likewise.
(dwarf_expr_get_obj_addr): Likewise.
(entry_data_value_coerce_ref): Likewise.
(entry_data_value_copy_closure): Likewise.
(entry_data_value_free_closure): Likewise.
(get_frame_address_in_block_wrapper): Likewise.
(dwarf2_evaluate_property): Likewise.
(dwarf2_compile_property_to_c): Likewise.
(needs_frame_read_addr_from_reg): Likewise.
(needs_frame_get_reg_value): Likewise.
(needs_frame_frame_base): Likewise.
(needs_frame_frame_cfa): Likewise.
(needs_frame_tls_address): Likewise.
(needs_frame_dwarf_call): Likewise.
(needs_dwarf_reg_entry_value): Likewise.
(get_ax_pc): Likewise.
(locexpr_read_variable): Likewise.
(locexpr_read_variable_at_entry): Likewise.
(locexpr_read_needs_frame): Likewise.
(locexpr_describe_location): Likewise.
(locexpr_tracepoint_var_ref): Likewise.
(locexpr_generate_c_location): Likewise.
(loclist_read_variable): Likewise.
(loclist_read_variable_at_entry): Likewise.
(loclist_describe_location): Likewise.
(loclist_tracepoint_var_ref): Likewise.
(loclist_generate_c_location): Likewise.
* dwarf2read.c (line_header_hash_voidp): Likewise.
(line_header_eq_voidp): Likewise.
(dwarf2_has_info): Likewise.
(dwarf2_get_section_info): Likewise.
(locate_dwz_sections): Likewise.
(hash_file_name_entry): Likewise.
(eq_file_name_entry): Likewise.
(delete_file_name_entry): Likewise.
(dw2_setup): Likewise.
(dw2_get_file_names_reader): Likewise.
(dw2_find_pc_sect_compunit_symtab): Likewise.
(hash_signatured_type): Likewise.
(eq_signatured_type): Likewise.
(add_signatured_type_cu_to_table): Likewise.
(create_debug_types_hash_table): Likewise.
(lookup_dwo_signatured_type): Likewise.
(lookup_dwp_signatured_type): Likewise.
(lookup_signatured_type): Likewise.
(hash_type_unit_group): Likewise.
(eq_type_unit_group): Likewise.
(get_type_unit_group): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(sort_tu_by_abbrev_offset): Likewise.
(process_skeletonless_type_unit): Likewise.
(psymtabs_addrmap_cleanup): Likewise.
(dwarf2_read_symtab): Likewise.
(psymtab_to_symtab_1): Likewise.
(die_hash): Likewise.
(die_eq): Likewise.
(load_full_comp_unit_reader): Likewise.
(reset_die_in_process): Likewise.
(free_cu_line_header): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(hash_dwo_file): Likewise.
(eq_dwo_file): Likewise.
(hash_dwo_unit): Likewise.
(eq_dwo_unit): Likewise.
(create_dwo_cu_reader): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_unit_in_dwp): Likewise.
(dwarf2_locate_dwo_sections): Likewise.
(dwarf2_locate_common_dwp_sections): Likewise.
(dwarf2_locate_v2_dwp_sections): Likewise.
(hash_dwp_loaded_cutus): Likewise.
(eq_dwp_loaded_cutus): Likewise.
(lookup_dwo_cutu): Likewise.
(abbrev_table_free_cleanup): Likewise.
(dwarf2_free_abbrev_table): Likewise.
(find_partial_die_in_comp_unit): Likewise.
(free_line_header_voidp): Likewise.
(follow_die_offset): Likewise.
(follow_die_sig_1): Likewise.
(free_heap_comp_unit): Likewise.
(free_stack_comp_unit): Likewise.
(dwarf2_free_objfile): Likewise.
(per_cu_offset_and_type_hash): Likewise.
(per_cu_offset_and_type_eq): Likewise.
(get_die_type_at_offset): Likewise.
(partial_die_hash): Likewise.
(partial_die_eq): Likewise.
(dwarf2_per_objfile_free): Likewise.
(hash_strtab_entry): Likewise.
(eq_strtab_entry): Likewise.
(add_string): Likewise.
(hash_symtab_entry): Likewise.
(eq_symtab_entry): Likewise.
(delete_symtab_entry): Likewise.
(cleanup_mapped_symtab): Likewise.
(add_indices_to_cpool): Likewise.
(hash_psymtab_cu_index): Likewise.
(eq_psymtab_cu_index): Likewise.
(add_address_entry_worker): Likewise.
(unlink_if_set): Likewise.
(write_one_signatured_type): Likewise.
(save_gdb_index_command): Likewise.
* elfread.c (elf_symtab_read): Likewise.
(elf_gnu_ifunc_cache_hash): Likewise.
(elf_gnu_ifunc_cache_eq): Likewise.
(elf_gnu_ifunc_record_cache): Likewise.
(elf_gnu_ifunc_resolve_by_cache): Likewise.
(elf_get_probes): Likewise.
(probe_key_free): Likewise.
* f-lang.c (builtin_f_type): Likewise.
* frame-base.c (frame_base_append_sniffer): Likewise.
(frame_base_set_default): Likewise.
(frame_base_find_by_frame): Likewise.
* frame-unwind.c (frame_unwind_prepend_unwinder): Likewise.
(frame_unwind_append_unwinder): Likewise.
(frame_unwind_find_by_frame): Likewise.
* frame.c (frame_addr_hash): Likewise.
(frame_addr_hash_eq): Likewise.
(frame_stash_find): Likewise.
(do_frame_register_read): Likewise.
(unwind_to_current_frame): Likewise.
(frame_cleanup_after_sniffer): Likewise.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
* frv-tdep.c (frv_frame_unwind_cache): Likewise.
* ft32-tdep.c (ft32_frame_cache): Likewise.
* gcore.c (do_bfd_delete_cleanup): Likewise.
(gcore_create_callback): Likewise.
* gdb_bfd.c (hash_bfd): Likewise.
(eq_bfd): Likewise.
(gdb_bfd_open): Likewise.
(free_one_bfd_section): Likewise.
(gdb_bfd_ref): Likewise.
(gdb_bfd_unref): Likewise.
(get_section_descriptor): Likewise.
(gdb_bfd_map_section): Likewise.
(gdb_bfd_crc): Likewise.
(gdb_bfd_mark_parent): Likewise.
(gdb_bfd_record_inclusion): Likewise.
(gdb_bfd_requires_relocations): Likewise.
(print_one_bfd): Likewise.
* gdbtypes.c (type_pair_hash): Likewise.
(type_pair_eq): Likewise.
(builtin_type): Likewise.
(objfile_type): Likewise.
* gnu-v3-abi.c (vtable_ptrdiff_type): Likewise.
(vtable_address_point_offset): Likewise.
(gnuv3_get_vtable): Likewise.
(hash_value_and_voffset): Likewise.
(eq_value_and_voffset): Likewise.
(compare_value_and_voffset): Likewise.
(compute_vtable_size): Likewise.
(gnuv3_get_typeid_type): Likewise.
* go-lang.c (builtin_go_type): Likewise.
* guile/scm-block.c (bkscm_hash_block_smob): Likewise.
(bkscm_eq_block_smob): Likewise.
(bkscm_objfile_block_map): Likewise.
(bkscm_del_objfile_blocks): Likewise.
* guile/scm-breakpoint.c (bpscm_build_bp_list): Likewise.
* guile/scm-disasm.c (gdbscm_disasm_read_memory_worker): Likewise.
(gdbscm_disasm_print_address): Likewise.
* guile/scm-frame.c (frscm_hash_frame_smob): Likewise.
(frscm_eq_frame_smob): Likewise.
(frscm_inferior_frame_map): Likewise.
(frscm_del_inferior_frames): Likewise.
* guile/scm-gsmob.c (gdbscm_add_objfile_ref): Likewise.
* guile/scm-objfile.c (ofscm_handle_objfile_deleted): Likewise.
(ofscm_objfile_smob_from_objfile): Likewise.
* guile/scm-ports.c (ioscm_write): Likewise.
(ioscm_file_port_delete): Likewise.
(ioscm_file_port_rewind): Likewise.
(ioscm_file_port_put): Likewise.
(ioscm_file_port_write): Likewise.
* guile/scm-progspace.c (psscm_handle_pspace_deleted): Likewise.
(psscm_pspace_smob_from_pspace): Likewise.
* guile/scm-safe-call.c (scscm_recording_pre_unwind_handler): Likewise.
(scscm_recording_unwind_handler): Likewise.
(gdbscm_with_catch): Likewise.
(scscm_call_0_body): Likewise.
(scscm_call_1_body): Likewise.
(scscm_call_2_body): Likewise.
(scscm_call_3_body): Likewise.
(scscm_call_4_body): Likewise.
(scscm_apply_1_body): Likewise.
(scscm_eval_scheme_string): Likewise.
(gdbscm_safe_eval_string): Likewise.
(scscm_source_scheme_script): Likewise.
(gdbscm_safe_source_script): Likewise.
* guile/scm-string.c (gdbscm_call_scm_to_stringn): Likewise.
(gdbscm_call_scm_from_stringn): Likewise.
* guile/scm-symbol.c (syscm_hash_symbol_smob): Likewise.
(syscm_eq_symbol_smob): Likewise.
(syscm_get_symbol_map): Likewise.
(syscm_del_objfile_symbols): Likewise.
* guile/scm-symtab.c (stscm_hash_symtab_smob): Likewise.
(stscm_eq_symtab_smob): Likewise.
(stscm_objfile_symtab_map): Likewise.
(stscm_del_objfile_symtabs): Likewise.
* guile/scm-type.c (tyscm_hash_type_smob): Likewise.
(tyscm_eq_type_smob): Likewise.
(tyscm_type_map): Likewise.
(tyscm_copy_type_recursive): Likewise.
(save_objfile_types): Likewise.
* guile/scm-utils.c (extract_arg): Likewise.
* h8300-tdep.c (h8300_frame_cache): Likewise.
* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind_cache): Likewise.
* hppa-tdep.c (compare_unwind_entries): Likewise.
(find_unwind_entry): Likewise.
(hppa_frame_cache): Likewise.
(hppa_stub_frame_unwind_cache): Likewise.
* hppanbsd-tdep.c (hppanbsd_supply_gregset): Likewise.
* hppaobsd-tdep.c (hppaobsd_supply_gregset): Likewise.
(hppaobsd_supply_fpregset): Likewise.
* i386-cygwin-tdep.c (core_process_module_section): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_frame_cache): Likewise.
(i386_epilogue_frame_cache): Likewise.
(i386_sigtramp_frame_cache): Likewise.
(i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_gdbarch_init): Likewise.
* i386obsd-tdep.c (i386obsd_aout_supply_regset): Likewise.
(i386obsd_trapframe_cache): Likewise.
* i387-tdep.c (i387_supply_fsave): Likewise.
(i387_collect_fsave): Likewise.
(i387_supply_fxsave): Likewise.
(i387_collect_fxsave): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* ia64-tdep.c (ia64_frame_cache): Likewise.
(ia64_sigtramp_frame_cache): Likewise.
* infcmd.c (attach_command_continuation): Likewise.
(attach_command_continuation_free_args): Likewise.
* inferior.c (restore_inferior): Likewise.
(delete_thread_of_inferior): Likewise.
* inflow.c (inflow_inferior_data_cleanup): Likewise.
(get_inflow_inferior_data): Likewise.
(inflow_inferior_exit): Likewise.
* infrun.c (displaced_step_clear_cleanup): Likewise.
(restore_current_uiout_cleanup): Likewise.
(release_stop_context_cleanup): Likewise.
(do_restore_infcall_suspend_state_cleanup): Likewise.
(do_restore_infcall_control_state_cleanup): Likewise.
(restore_inferior_ptid): Likewise.
* inline-frame.c (block_starting_point_at): Likewise.
* iq2000-tdep.c (iq2000_frame_cache): Likewise.
* jit.c (get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_close_impl): Likewise.
(jit_find_objf_with_entry_addr): Likewise.
(jit_breakpoint_deleted): Likewise.
(jit_unwind_reg_set_impl): Likewise.
(jit_unwind_reg_get_impl): Likewise.
(jit_dealloc_cache): Likewise.
(jit_frame_sniffer): Likewise.
(jit_frame_prev_register): Likewise.
(jit_prepend_unwinder): Likewise.
(jit_inferior_exit_hook): Likewise.
(free_objfile_data): Likewise.
* jv-lang.c (jv_per_objfile_free): Likewise.
(get_dynamics_objfile): Likewise.
(get_java_class_symtab): Likewise.
(builtin_java_type): Likewise.
* language.c (language_string_char_type): Likewise.
(language_bool_type): Likewise.
(language_lookup_primitive_type): Likewise.
(language_lookup_primitive_type_as_symbol): Likewise.
* linespec.c (hash_address_entry): Likewise.
(eq_address_entry): Likewise.
(iterate_inline_only): Likewise.
(iterate_name_matcher): Likewise.
(decode_line_2_compare_items): Likewise.
(collect_one_symbol): Likewise.
(compare_symbols): Likewise.
(compare_msymbols): Likewise.
(add_symtabs_to_list): Likewise.
(collect_symbols): Likewise.
(compare_msyms): Likewise.
(add_minsym): Likewise.
(cleanup_linespec_result): Likewise.
* linux-fork.c (inferior_call_waitpid_cleanup): Likewise.
* linux-nat.c (delete_lwp_cleanup): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(resume_stopped_resumed_lwps): Likewise.
* linux-tdep.c (get_linux_gdbarch_data): Likewise.
(invalidate_linux_cache_inf): Likewise.
(get_linux_inferior_data): Likewise.
(linux_find_memory_regions_thunk): Likewise.
(linux_make_mappings_callback): Likewise.
(linux_corefile_thread_callback): Likewise.
(find_mapping_size): Likewise.
* linux-thread-db.c (find_new_threads_callback): Likewise.
* lm32-tdep.c (lm32_frame_cache): Likewise.
* m2-lang.c (builtin_m2_type): Likewise.
* m32c-tdep.c (m32c_analyze_frame_prologue): Likewise.
* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_cache): Likewise.
(m32r_linux_supply_gregset): Likewise.
(m32r_linux_collect_gregset): Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
* m68k-tdep.c (m68k_frame_cache): Likewise.
* m68kbsd-tdep.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_supply_gregset): Likewise.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* m88k-tdep.c (m88k_frame_cache): Likewise.
(m88k_supply_gregset): Likewise.
gdb/gdbserver/ChangeLog:
* dll.c (match_dll): Add cast(s).
(unloaded_dll): Likewise.
* linux-low.c (second_thread_of_pid_p): Likewise.
(delete_lwp_callback): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(linux_set_resume_request): Likewise.
* server.c (accumulate_file_name_length): Likewise.
(emit_dll_description): Likewise.
(handle_qxfer_threads_worker): Likewise.
(visit_actioned_threads): Likewise.
* thread-db.c (any_thread_of): Likewise.
* tracepoint.c (same_process_p): Likewise.
(match_blocktype): Likewise.
(build_traceframe_info_xml): Likewise.
gdb/testsuite/ChangeLog:
* gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected
source line.
|
|
Most allocation functions (if not all) return a void* pointing to the
allocated memory. In C++, we need to add an explicit cast when
assigning the result to a pointer to another type (which is the case
more often than not).
The content of this patch is taken from Pedro's branch, from commit
"(mostly) auto-generated patch to insert casts needed for C++". I
validated that the changes make sense and manually reflowed the code to
make it respect the coding style. I also found multiple places where I
could use XNEW/XNEWVEC/XRESIZEVEC/etc.
Thanks a lot to whoever did that automated script to insert casts, doing
it completely by hand would have taken a ridiculous amount of time.
Only files built on x86 with --enable-targets=all are modified. This
means that all other -nat.c files are untouched and will have to be
dealt with later by using appropiate compilers. Or maybe we can try to
build them with a regular g++ just to know where to add casts, I don't
know.
I built-tested this with --enable-targets=all and reg-tested.
Here's the changelog entry, which was not too bad to make despite the
size, thanks to David Malcom's script. I fixed some bits by hand, but
there might be some wrong parts left (hopefully not).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast
to allocation result assignment.
* ada-exp.y (write_object_renaming): Likewise.
(write_ambiguous_var): Likewise.
(ada_nget_field_index): Likewise.
(write_var_or_type): Likewise.
* ada-lang.c (ada_decode_symbol): Likewise.
(ada_value_assign): Likewise.
(value_pointer): Likewise.
(cache_symbol): Likewise.
(add_nonlocal_symbols): Likewise.
(ada_name_for_lookup): Likewise.
(symbol_completion_add): Likewise.
(ada_to_fixed_type_1): Likewise.
(ada_get_next_arg): Likewise.
(defns_collected): Likewise.
* ada-lex.l (processId): Likewise.
(processString): Likewise.
* ada-tasks.c (read_known_tasks_array): Likewise.
(read_known_tasks_list): Likewise.
* ada-typeprint.c (decoded_type_name): Likewise.
* addrmap.c (addrmap_mutable_create_fixed): Likewise.
* amd64-tdep.c (amd64_push_arguments): Likewise.
(amd64_displaced_step_copy_insn): Likewise.
(amd64_classify_insn_at): Likewise.
(amd64_relocate_instruction): Likewise.
* amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise.
* arch-utils.c (simple_displaced_step_copy_insn): Likewise.
(initialize_current_architecture): Likewise.
* arm-linux-tdep.c (arm_stap_parse_special_token): Likewise.
* arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise.
* arm-tdep.c (arm_exidx_new_objfile): Likewise.
(arm_push_dummy_call): Likewise.
(extend_buffer_earlier): Likewise.
(arm_adjust_breakpoint_address): Likewise.
(arm_skip_stub): Likewise.
* auto-load.c (filename_is_in_pattern): Likewise.
(maybe_add_script_file): Likewise.
(maybe_add_script_text): Likewise.
(auto_load_objfile_script_1): Likewise.
* auxv.c (ld_so_xfer_auxv): Likewise.
* ax-general.c (new_agent_expr): Likewise.
(grow_expr): Likewise.
(ax_reg_mask): Likewise.
* bcache.c (bcache_full): Likewise.
* breakpoint.c (program_breakpoint_here_p): Likewise.
* btrace.c (parse_xml_raw): Likewise.
* build-id.c (build_id_to_debug_bfd): Likewise.
* buildsym.c (end_symtab_with_blockvector): Likewise.
* c-exp.y (string_exp): Likewise.
(qualified_name): Likewise.
(write_destructor_name): Likewise.
(operator_stoken): Likewise.
(parse_number): Likewise.
(scan_macro_expansion): Likewise.
(yylex): Likewise.
(c_print_token): Likewise.
* c-lang.c (c_get_string): Likewise.
(emit_numeric_character): Likewise.
* charset.c (wchar_iterate): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
(make_command): Likewise.
* cli/cli-dump.c (restore_section_callback): Likewise.
(restore_binary_file): Likewise.
* cli/cli-interp.c (cli_interpreter_exec): Likewise.
* cli/cli-script.c (execute_control_command): Likewise.
* cli/cli-setshow.c (do_set_command): Likewise.
* coff-pe-read.c (add_pe_forwarded_sym): Likewise.
(read_pe_exported_syms): Likewise.
* coffread.c (coff_read_struct_type): Likewise.
(coff_read_enum_type): Likewise.
* common/btrace-common.c (btrace_data_append): Likewise.
* common/buffer.c (buffer_grow): Likewise.
* common/filestuff.c (gdb_fopen_cloexec): Likewise.
* common/format.c (parse_format_string): Likewise.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise.
* common/xml-utils.c (xml_escape_text): Likewise.
* compile/compile-object-load.c (copy_sections): Likewise.
(compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* completer.c (filename_completer): Likewise.
* corefile.c (read_memory_typed_address): Likewise.
(write_memory_unsigned_integer): Likewise.
(write_memory_signed_integer): Likewise.
(complete_set_gnutarget): Likewise.
* corelow.c (get_core_register_section): Likewise.
* cp-name-parser.y (d_grab): Likewise.
(allocate_info): Likewise.
(cp_new_demangle_parse_info): Likewise.
* cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise.
(cp_lookup_symbol_in_namespace): Likewise.
(lookup_namespace_scope): Likewise.
(find_symbol_in_baseclass): Likewise.
(cp_lookup_nested_symbol): Likewise.
(cp_lookup_transparent_type_loop): Likewise.
* cp-support.c (copy_string_to_obstack): Likewise.
(make_symbol_overload_list): Likewise.
(make_symbol_overload_list_namespace): Likewise.
(make_symbol_overload_list_adl_namespace): Likewise.
(first_component_command): Likewise.
* cp-valprint.c (cp_print_value): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* d-exp.y (StringExp): Likewise.
* d-namespace.c (d_lookup_symbol_in_module): Likewise.
(lookup_module_scope): Likewise.
(find_symbol_in_baseclass): Likewise.
(d_lookup_nested_symbol): Likewise.
* dbxread.c (find_stab_function_addr): Likewise.
(read_dbx_symtab): Likewise.
(dbx_end_psymtab): Likewise.
(cp_set_block_scope): Likewise.
* dcache.c (dcache_alloc): Likewise.
* demangle.c (_initialize_demangler): Likewise.
* dicos-tdep.c (dicos_load_module_p): Likewise.
* dictionary.c (dict_create_hashed_expandable): Likewise.
(dict_create_linear_expandable): Likewise.
(expand_hashtable): Likewise.
(add_symbol_linear_expandable): Likewise.
* dwarf2-frame.c (add_cie): Likewise.
(add_fde): Likewise.
(dwarf2_build_frame_info): Likewise.
* dwarf2expr.c (dwarf_expr_grow_stack): Likewise.
(dwarf_expr_fetch_address): Likewise.
(add_piece): Likewise.
(execute_stack_op): Likewise.
* dwarf2loc.c (chain_candidate): Likewise.
(dwarf_entry_parameter_to_value): Likewise.
(read_pieced_value): Likewise.
(write_pieced_value): Likewise.
* dwarf2read.c (dwarf2_read_section): Likewise.
(add_type_unit): Likewise.
(read_comp_units_from_section): Likewise.
(fixup_go_packaging): Likewise.
(dwarf2_compute_name): Likewise.
(dwarf2_physname): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(read_func_scope): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_attach_fields_to_type): Likewise.
(process_structure_scope): Likewise.
(mark_common_block_symbol_computed): Likewise.
(read_common_block): Likewise.
(abbrev_table_read_table): Likewise.
(guess_partial_die_structure_name): Likewise.
(fixup_partial_die): Likewise.
(add_file_name): Likewise.
(dwarf2_const_value_data): Likewise.
(dwarf2_const_value_attr): Likewise.
(build_error_marker_type): Likewise.
(guess_full_die_structure_name): Likewise.
(anonymous_struct_prefix): Likewise.
(typename_concat): Likewise.
(dwarf2_canonicalize_name): Likewise.
(dwarf2_name): Likewise.
(write_constant_as_bytes): Likewise.
(dwarf2_fetch_constant_bytes): Likewise.
(copy_string): Likewise.
(parse_macro_definition): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_rel_plt_read): Likewise.
(elf_gnu_ifunc_resolve_by_cache): Likewise.
(elf_gnu_ifunc_resolve_by_got): Likewise.
(elf_read_minimal_symbols): Likewise.
(elf_gnu_ifunc_record_cache): Likewise.
* event-top.c (top_level_prompt): Likewise.
(command_line_handler): Likewise.
* exec.c (resize_section_table): Likewise.
* expprint.c (print_subexp_standard): Likewise.
* fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise.
* findcmd.c (parse_find_args): Likewise.
* findvar.c (address_from_register): Likewise.
* frame.c (get_prev_frame_always): Likewise.
* gdb_bfd.c (gdb_bfd_ref): Likewise.
(get_section_descriptor): Likewise.
* gdb_obstack.c (obconcat): Likewise.
(obstack_strdup): Likewise.
* gdbtypes.c (lookup_function_type_with_arguments): Likewise.
(create_set_type): Likewise.
(lookup_unsigned_typename): Likewise.
(lookup_signed_typename): Likewise.
(resolve_dynamic_union): Likewise.
(resolve_dynamic_struct): Likewise.
(add_dyn_prop): Likewise.
(copy_dynamic_prop_list): Likewise.
(arch_flags_type): Likewise.
(append_composite_type_field_raw): Likewise.
* gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise.
* gnu-v3-abi.c (gnuv3_rtti_type): Likewise.
* go-exp.y (string_exp): Likewise.
* go-lang.c (go_demangle): Likewise.
* guile/guile.c (compute_scheme_string): Likewise.
* guile/scm-cmd.c (gdbscm_parse_command_name): Likewise.
(gdbscm_canonicalize_command_name): Likewise.
* guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise.
(ioscm_init_memory_port): Likewise.
(ioscm_reinit_memory_port): Likewise.
* guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise.
(gdbscm_gc_dup_argv): Likewise.
* h8300-tdep.c (h8300_push_dummy_call): Likewise.
* hppa-tdep.c (internalize_unwinds): Likewise.
(read_unwind_info): Likewise.
* i386-cygwin-tdep.c (core_process_module_section): Likewise.
(windows_core_xfer_shared_libraries): Likewise.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
(i386_stap_parse_special_token_triplet): Likewise.
(i386_stap_parse_special_token_three_arg_disp): Likewise.
* i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise.
* inf-child.c (inf_child_fileio_readlink): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register): Likewise.
(inf_ptrace_store_register): Likewise.
* infrun.c (follow_exec): Likewise.
(displaced_step_prepare_throw): Likewise.
(save_stop_context): Likewise.
(save_infcall_suspend_state): Likewise.
* jit.c (jit_read_descriptor): Likewise.
(jit_read_code_entry): Likewise.
(jit_symtab_line_mapping_add_impl): Likewise.
(finalize_symtab): Likewise.
(jit_unwind_reg_get_impl): Likewise.
* jv-exp.y (QualifiedName): Likewise.
* jv-lang.c (get_java_utf8_name): Likewise.
(type_from_class): Likewise.
(java_demangle_type_signature): Likewise.
(java_class_name_from_physname): Likewise.
* jv-typeprint.c (java_type_print_base): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* language.c (add_language): Likewise.
* linespec.c (add_sal_to_sals_basic): Likewise.
(add_sal_to_sals): Likewise.
(decode_objc): Likewise.
(find_linespec_symbols): Likewise.
* linux-fork.c (fork_save_infrun_state): Likewise.
* linux-nat.c (linux_nat_detach): Likewise.
(linux_nat_fileio_readlink): Likewise.
* linux-record.c (record_linux_sockaddr): Likewise.
(record_linux_msghdr): Likewise.
(Do): Likewise.
* linux-tdep.c (linux_core_info_proc_mappings): Likewise.
(linux_collect_regset_section_cb): Likewise.
(linux_get_siginfo_data): Likewise.
* linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise.
(try_thread_db_load_from_dir): Likewise.
(thread_db_load_search): Likewise.
(info_auto_load_libthread_db): Likewise.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
(m32c_m16c_pointer_to_address): Likewise.
* m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* machoread.c (macho_check_dsym): Likewise.
* macroexp.c (resize_buffer): Likewise.
(gather_arguments): Likewise.
(maybe_expand): Likewise.
* macrotab.c (new_macro_key): Likewise.
(new_source_file): Likewise.
(new_macro_definition): Likewise.
* mdebugread.c (parse_symbol): Likewise.
(parse_type): Likewise.
(parse_partial_symbols): Likewise.
(psymtab_to_symtab_1): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Likewise.
* mi/mi-cmd-break.c (mi_argv_to_format): Likewise.
* mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_data_write_memory_bytes): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-parse.c (mi_parse_argv): Likewise.
(mi_parse): Likewise.
* minidebug.c (lzma_open): Likewise.
(lzma_pread): Likewise.
* mips-tdep.c (mips_read_fp_register_single): Likewise.
(mips_print_fp_register): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise.
* mipsread.c (read_alphacoff_dynamic_symtab): Likewise.
* mt-tdep.c (mt_register_name): Likewise.
(mt_registers_info): Likewise.
(mt_push_dummy_call): Likewise.
* namespace.c (add_using_directive): Likewise.
* nat/linux-btrace.c (perf_event_read): Likewise.
(linux_enable_bts): Likewise.
* nat/linux-osdata.c (linux_common_core_of_thread): Likewise.
* nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise.
* nto-tdep.c (nto_find_and_open_solib): Likewise.
(nto_parse_redirection): Likewise.
* objc-lang.c (objc_demangle): Likewise.
(find_methods): Likewise.
* objfiles.c (get_objfile_bfd_data): Likewise.
(set_objfile_main_name): Likewise.
(allocate_objfile): Likewise.
(objfile_relocate): Likewise.
(update_section_map): Likewise.
* osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise.
* p-exp.y (exp): Likewise.
(yylex): Likewise.
* p-valprint.c (pascal_object_print_value): Likewise.
* parse.c (initialize_expout): Likewise.
(mark_completion_tag): Likewise.
(copy_name): Likewise.
(parse_float): Likewise.
(type_stack_reserve): Likewise.
* ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise.
(ppu2spu_prev_register): Likewise.
* ppc-ravenscar-thread.c (supply_register_at_address): Likewise.
* printcmd.c (printf_wide_c_string): Likewise.
(printf_pointer): Likewise.
* probe.c (parse_probes): Likewise.
* python/py-cmd.c (gdbpy_parse_command_name): Likewise.
(cmdpy_init): Likewise.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise.
* python/py-symtab.c (set_sal): Likewise.
* python/py-unwind.c (pyuw_sniffer): Likewise.
* python/python.c (python_interactive_command): Likewise.
(compute_python_string): Likewise.
* ravenscar-thread.c (get_running_thread_id): Likewise.
* record-full.c (record_full_exec_insn): Likewise.
(record_full_core_open_1): Likewise.
* regcache.c (regcache_raw_read_signed): Likewise.
(regcache_raw_read_unsigned): Likewise.
(regcache_cooked_read_signed): Likewise.
(regcache_cooked_read_unsigned): Likewise.
* remote-fileio.c (remote_fileio_func_open): Likewise.
(remote_fileio_func_rename): Likewise.
(remote_fileio_func_unlink): Likewise.
(remote_fileio_func_stat): Likewise.
(remote_fileio_func_system): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
(mips_load_srec): Likewise.
(pmon_end_download): Likewise.
* remote.c (new_remote_state): Likewise.
(map_regcache_remote_table): Likewise.
(remote_register_number_and_offset): Likewise.
(init_remote_state): Likewise.
(get_memory_packet_size): Likewise.
(remote_pass_signals): Likewise.
(remote_program_signals): Likewise.
(remote_start_remote): Likewise.
(remote_check_symbols): Likewise.
(remote_query_supported): Likewise.
(extended_remote_attach): Likewise.
(process_g_packet): Likewise.
(store_registers_using_G): Likewise.
(putpkt_binary): Likewise.
(read_frame): Likewise.
(compare_sections_command): Likewise.
(remote_hostio_pread): Likewise.
(remote_hostio_readlink): Likewise.
(remote_file_put): Likewise.
(remote_file_get): Likewise.
(remote_pid_to_exec_file): Likewise.
(_initialize_remote): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise.
(bfd_uses_spe_extensions): Likewise.
* s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise.
* score-tdep.c (score7_malloc_and_get_memblock): Likewise.
* solib-dsbt.c (decode_loadmap): Likewise.
(fetch_loadmap): Likewise.
(scan_dyntag): Likewise.
(enable_break): Likewise.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (fetch_loadmap): Likewise.
(enable_break2): Likewise.
(frv_relocate_main_executable): Likewise.
* solib-spu.c (spu_relocate_main_executable): Likewise.
(spu_bfd_open): Likewise.
* solib-svr4.c (lm_info_read): Likewise.
(read_program_header): Likewise.
(find_program_interpreter): Likewise.
(scan_dyntag): Likewise.
(elf_locate_base): Likewise.
(open_symbol_file_object): Likewise.
(read_program_headers_from_bfd): Likewise.
(svr4_relocate_main_executable): Likewise.
* solib-target.c (solib_target_relocate_section_addresses): Likewise.
* solib.c (solib_find_1): Likewise.
(exec_file_find): Likewise.
(solib_find): Likewise.
* source.c (openp): Likewise.
(print_source_lines_base): Likewise.
(forward_search_command): Likewise.
* sparc-ravenscar-thread.c (supply_register_at_address): Likewise.
* spu-tdep.c (spu2ppu_prev_register): Likewise.
(spu_get_overlay_table): Likewise.
* stabsread.c (patch_block_stabs): Likewise.
(define_symbol): Likewise.
(again:): Likewise.
(read_member_functions): Likewise.
(read_one_struct_field): Likewise.
(read_enum_type): Likewise.
(common_block_start): Likewise.
* stack.c (read_frame_arg): Likewise.
(backtrace_command): Likewise.
* stap-probe.c (stap_parse_register_operand): Likewise.
* symfile.c (syms_from_objfile_1): Likewise.
(find_separate_debug_file): Likewise.
(load_command): Likewise.
(load_progress): Likewise.
(load_section_callback): Likewise.
(reread_symbols): Likewise.
(add_filename_language): Likewise.
(allocate_compunit_symtab): Likewise.
(read_target_long_array): Likewise.
(simple_read_overlay_table): Likewise.
* symtab.c (symbol_set_names): Likewise.
(resize_symbol_cache): Likewise.
(rbreak_command): Likewise.
(completion_list_add_name): Likewise.
(completion_list_objc_symbol): Likewise.
(add_filename_to_list): Likewise.
* target-descriptions.c (maint_print_c_tdesc_cmd): Likewise.
* target-memory.c (target_write_memory_blocks): Likewise.
* target.c (target_read_string): Likewise.
(read_whatever_is_readable): Likewise.
(target_read_alloc_1): Likewise.
(simple_search_memory): Likewise.
(target_fileio_read_alloc_1): Likewise.
* tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
* top.c (command_line_input): Likewise.
* tracefile-tfile.c (tfile_fetch_registers): Likewise.
* tracefile.c (tracefile_fetch_registers): Likewise.
* tracepoint.c (add_memrange): Likewise.
(init_collection_list): Likewise.
(add_aexpr): Likewise.
(trace_dump_actions): Likewise.
(parse_trace_status): Likewise.
(parse_tracepoint_definition): Likewise.
(parse_tsv_definition): Likewise.
(parse_static_tracepoint_marker_definition): Likewise.
* tui/tui-file.c (tui_sfileopen): Likewise.
(tui_file_adjust_strbuf): Likewise.
* tui/tui-io.c (tui_expand_tabs): Likewise.
* tui/tui-source.c (tui_set_source_content): Likewise.
* typeprint.c (find_global_typedef): Likewise.
* ui-file.c (do_ui_file_xstrdup): Likewise.
(ui_file_obsavestring): Likewise.
(mem_file_write): Likewise.
* utils.c (make_hex_string): Likewise.
(get_regcomp_error): Likewise.
(puts_filtered_tabular): Likewise.
(gdb_realpath_keepfile): Likewise.
(ldirname): Likewise.
(gdb_bfd_errmsg): Likewise.
(substitute_path_component): Likewise.
* valops.c (search_struct_method): Likewise.
(find_oload_champ_namespace_loop): Likewise.
* valprint.c (print_decimal_chars): Likewise.
(read_string): Likewise.
(generic_emit_char): Likewise.
* varobj.c (varobj_delete): Likewise.
(varobj_value_get_print_value): Likewise.
* vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise.
* windows-tdep.c (display_one_tib): Likewise.
* xcoffread.c (read_xcoff_symtab): Likewise.
(process_xcoff_symbol): Likewise.
(swap_sym): Likewise.
(scan_xcoff_symtab): Likewise.
(xcoff_initial_scan): Likewise.
* xml-support.c (gdb_xml_end_element): Likewise.
(xml_process_xincludes): Likewise.
(xml_fetch_content_from_file): Likewise.
* xml-syscall.c (xml_list_of_syscalls): Likewise.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise.
gdb/gdbserver/ChangeLog:
* ax.c (gdb_parse_agent_expr): Add cast to allocation result
assignment.
(gdb_unparse_agent_expr): Likewise.
* hostio.c (require_data): Likewise.
(handle_pread): Likewise.
* linux-low.c (disable_regset): Likewise.
(fetch_register): Likewise.
(store_register): Likewise.
(get_dynamic): Likewise.
(linux_qxfer_libraries_svr4): Likewise.
* mem-break.c (delete_fast_tracepoint_jump): Likewise.
(set_fast_tracepoint_jump): Likewise.
(uninsert_fast_tracepoint_jumps_at): Likewise.
(reinsert_fast_tracepoint_jumps_at): Likewise.
(validate_inserted_breakpoint): Likewise.
(clone_agent_expr): Likewise.
* regcache.c (init_register_cache): Likewise.
* remote-utils.c (putpkt_binary_1): Likewise.
(decode_M_packet): Likewise.
(decode_X_packet): Likewise.
(look_up_one_symbol): Likewise.
(relocate_instruction): Likewise.
(monitor_output): Likewise.
* server.c (handle_search_memory): Likewise.
(handle_qxfer_exec_file): Likewise.
(handle_qxfer_libraries): Likewise.
(handle_qxfer): Likewise.
(handle_query): Likewise.
(handle_v_cont): Likewise.
(handle_v_run): Likewise.
(captured_main): Likewise.
* target.c (write_inferior_memory): Likewise.
* thread-db.c (try_thread_db_load_from_dir): Likewise.
* tracepoint.c (init_trace_buffer): Likewise.
(add_tracepoint_action): Likewise.
(add_traceframe): Likewise.
(add_traceframe_block): Likewise.
(cmd_qtdpsrc): Likewise.
(cmd_qtdv): Likewise.
(cmd_qtstatus): Likewise.
(response_source): Likewise.
(response_tsv): Likewise.
(cmd_qtnotes): Likewise.
(gdb_collect): Likewise.
(initialize_tracepoint): Likewise.
|
|
Record targets behave as if scheduler-locking were on in replay mode. Add a
new scheduler-locking option "replay" to make this implicit behaviour explicit.
It behaves like "on" in replay mode and like "off" in record mode.
By making the current behaviour a scheduler-locking option, we allow the user
to change it. Since it is the current behaviour, this new option is also
the new default.
One caveat is that when resuming a thread that is at the end of its execution
history, record btrace implicitly stops replaying other threads and resumes
the entire process. This is a convenience feature to not require the user
to explicitly move all other threads to the end of their execution histories
before being able to resume the process.
We mimick this behaviour with scheduler-locking replay and move it from
record-btrace into infrun. With all-stop on top of non-stop, we can't do
this in record-btrace anymore.
Record full does not really support multi-threading and is therefore not
impacted. If it were extended to support multi-threading, it would 'benefit'
from this change. The good thing is that all record targets will behave the
same with respect to scheduler-locking.
I put the code for this into clear_proceed_status. It also sends the
about_to_proceed notification.
gdb/
* NEWS: Announce new scheduler-locking mode.
* infrun.c (schedlock_replay): New.
(scheduler_enums): Add schedlock_replay.
(scheduler_mode): Change default to schedlock_replay.
(user_visible_resume_ptid): Handle schedlock_replay.
(clear_proceed_status_thread): Stop replaying if resumed thread is
not replaying.
(schedlock_applies): Handle schedlock_replay.
(_initialize_infrun): Document new scheduler-locking mode.
* record-btrace.c (record_btrace_resume): Remove code to stop other
threads when not replaying the resumed thread.
doc/
* gdb.texinfo (All-Stop Mode): Describe new scheduler-locking mode.
|
|
A thread that runs out of its execution history is stopped. We already set
stop_pc and call stop_waiting. But we do not switch to the stopped thread.
In normal_stop, we call finish_thread_state_cleanup to set a thread's running
state. In all-stop mode, we call it with minus_one_ptid; in non-stop mode, we
only call it for inferior_ptid.
If in non-stop mode normal_stop is called on behalf of a thread that is not
inferior_ptid, that other thread will still be reported as running. If it is
actually stopped it can't be resumed again.
Record targets traditionally don't support non-stop and only resume
inferior_ptid. So this has not been a problem, so far.
Switch to the eventing thread for NO_HISTORY events as preparation to support
non-stop for the record btrace target.
gdb/
* infrun.c (handle_inferior_event_1): Switch to the eventing thread
in the TARKET_WAITKIND_NO_HISTORY case.
|
|
This patch, relative to a tree with
https://sourceware.org/ml/gdb-patches/2015-08/msg00295.html, fixes
issues/crashes that trigger if something unexpected happens during a
hook-stop.
E.g., if the inferior disappears while running the hook-stop, we hit
failed assertions:
(gdb) define hook-stop
Type commands for definition of "hook-stop".
End with a line saying just "end".
>kill
>end
(gdb) si
Kill the program being debugged? (y or n) [answered Y; input not from terminal]
/home/pedro/gdb/mygit/build/../src/gdb/thread.c:88: internal-error: inferior_thread: Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
I noticed that if a hook-stop issues a synchronous execution command,
we print the same stop event twice:
(gdb) define hook-stop
Type commands for definition of "hook-stop".
End with a line saying just "end".
>si
>end
(gdb) si
0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< once
0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< twice
(gdb)
In MI:
*stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0"
*stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0"
(gdb)
The fix has GDB stop processing the event if the context changed. I
don't expect people to be doing crazy things from the hook-stop.
E.g., it gives me headaches to try to come up a proper behavior for
handling a thread change from a hook-stop... (E.g., imagine the
hook-stop does thread N; step, with scheduler-locing on). I think the
most important bit here is preventing crashes.
The patch adds a new hook-stop.exp test that covers the above and also
merges in the old hook-stop-continue.exp and hook-stop-frame.exp into
the same framework.
gdb/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* infrun.c (current_stop_id): New global.
(get_stop_id, new_stop_id): New functions.
(fetch_inferior_event): Handle normal_stop proceeding the target.
(struct stop_context): New.
(save_stop_context, release_stop_context_cleanup)
(stop_context_changed): New functions.
(normal_stop): Return true if the hook-stop changes the stop
context.
* infrun.h (get_stop_id): Declare.
(normal_stop): Now returns int. Add documentation.
gdb/testsuite/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* gdb.base/hook-stop-continue.c: Delete.
* gdb.base/hook-stop-continue.exp: Delete.
* gdb.base/hook-stop-frame.c: Delete.
* gdb.base/hook-stop-frame.exp: Delete.
* gdb.base/hook-stop.c: New file.
* gdb.base/hook-stop.exp: New file.
|
|
This patch implements support for exec events on extended-remote Linux
targets. Follow-exec-mode and rerun behave as expected. Catchpoints and
test updates are implemented in subsequent patches.
This patch was derived from a patch posted last October:
https://sourceware.org/ml/gdb-patches/2014-10/msg00877.html.
It was originally based on some work done by Luis Machado in 2013.
IMPLEMENTATION
----------------
Exec events are enabled via ptrace options.
When an exec event is detected by gdbserver, the existing process
data, along with all its associated lwp and thread data, is deleted
and replaced by data for a new single-threaded process. The new
process data is initialized with the appropriate parts of the state
of the execing process. This approach takes care of several potential
pitfalls, including:
* deleting the data for an execing non-leader thread before any
wait/sigsuspend occurs
* correctly initializing the architecture of the execed process
We then report the exec event using a new RSP stop reason, "exec".
When GDB receives an "exec" event, it saves the status in the event
structure's target_waitstatus field, like what is done for remote fork
events. Because the original and execed programs may have different
architectures, we skip parsing the section of the stop reply packet
that contains register data. The register data will be retrieved
later after the inferior's architecture has been set up by
infrun.c:follow_exec.
At that point the exec event is handled by the existing event handling
in GDB. However, a few changes were necessary so that
infrun.c:follow_exec could accommodate the remote target.
* Where follow-exec-mode "new" is handled, we now call
add_inferior_with_spaces instead of add_inferior with separate calls
to set up the program and address spaces. The motivation for this
is that add_inferior_with_spaces also sets up the initial architecture
for the inferior, which is needed later by target_find_description
when it calls target_gdbarch.
* We call a new target function, target_follow_exec. This function
allows us to store the execd_pathname in the inferior, instead of
using the static string remote_exec_file from remote.c. The static
string didn't work for follow-exec-mode "new", since once you switched
to the execed program, the original remote exec-file was lost. The
execd_pathname is now stored in the inferior's program space as a
REGISTRY field. All of the requisite mechanisms for this are
defined in remote.c.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_mourn): Static declaration.
(linux_arch_setup): Move in front of
handle_extended_wait.
(linux_arch_setup_thread): New function.
(handle_extended_wait): Handle exec events. Call
linux_arch_setup_thread. Make event_lwp argument a
pointer-to-a-pointer.
(check_zombie_leaders): Do not check stopped threads.
(linux_low_ptrace_options): Add PTRACE_O_TRACEEXEC.
(linux_low_filter_event): Add lwp and thread for exec'ing
non-leader thread if leader thread has been deleted.
Refactor code into linux_arch_setup_thread and call it.
Pass child lwp pointer by reference to handle_extended_wait.
(linux_wait_for_event_filtered): Update comment.
(linux_wait_1): Prevent clobbering exec event status.
(linux_supports_exec_events): New function.
(linux_target_ops) <supports_exec_events>: Initialize new member.
* lynx-low.c (lynx_target_ops) <supports_exec_events>: Initialize
new member.
* remote-utils.c (prepare_resume_reply): New stop reason 'exec'.
* server.c (report_exec_events): New global variable.
(handle_query): Handle qSupported query for exec-events feature.
(captured_main): Initialize report_exec_events.
* server.h (report_exec_events): Declare new global variable.
* target.h (struct target_ops) <supports_exec_events>: New
member.
(target_supports_exec_events): New macro.
* win32-low.c (win32_target_ops) <supports_exec_events>:
Initialize new member.
gdb/ChangeLog:
* infrun.c (follow_exec): Use process-style ptid for
exec message. Call add_inferior_with_spaces and
target_follow_exec.
* nat/linux-ptrace.c (linux_supports_traceexec): New function.
* nat/linux-ptrace.h (linux_supports_traceexec): Declare.
* remote.c (remote_pspace_data): New static variable.
(remote_pspace_data_cleanup): New function.
(get_remote_exec_file): New function.
(set_remote_exec_file_1): New function.
(set_remote_exec_file): New function.
(show_remote_exec_file): New function.
(remote_exec_file): Delete static variable.
(anonymous enum) <PACKET_exec_event_feature> New
enumeration constant.
(remote_protocol_features): Add entry for exec-events feature.
(remote_query_supported): Add client side of qSupported query
for exec-events feature.
(remote_follow_exec): New function.
(remote_parse_stop_reply): Handle 'exec' stop reason.
(extended_remote_run, extended_remote_create_inferior): Call
get_remote_exec_file and set_remote_exec_file_1.
(init_extended_remote_ops) <to_follow_exec>: Initialize new
member.
(_initialize_remote): Call
register_program_space_data_with_cleanup. Call
add_packet_config_cmd for remote exec-events feature.
Modify call to add_setshow_string_noescape_cmd for exec-file
to use new functions set_remote_exec_file and
show_remote_exec_file.
* target-debug.h, target-delegates.c: Regenerated.
* target.c (target_follow_exec): New function.
* target.h (struct target_ops) <to_follow_exec>: New member.
(target_follow_exec): Declare new function.
|
|
Nothing uses thread continuations anymore.
(inferior continuations are still used by the attach command.)
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* continuations.c (add_continuation, restore_thread_cleanup)
(do_all_continuations_ptid, do_all_continuations_thread_callback)
(do_all_continuations_thread, do_all_continuations)
(discard_all_continuations_thread_callback)
(discard_all_continuations_thread, discard_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread)
(do_all_intermediate_continuations)
(discard_all_intermediate_continuations_thread_callback)
(discard_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations): Delete.
* continuations.h (add_continuation, do_all_continuations)
(do_all_continuations_thread, discard_all_continuations)
(discard_all_continuations_thread, add_intermediate_continuation)
(do_all_intermediate_continuations)
(do_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations)
(discard_all_intermediate_continuations_thread): Delete
declarations.
* event-top.c (stdin_event_handler): Delete references to
continuations.
* gdbthread.h (struct thread_info): Delete continuations and
intermediate_continuations fields.
* inf-loop.c (inferior_event_handler): Remove references to
continuations.
* infrun.c (infrun_thread_stop_requested_callback): Remove
references to continuations.
* target.h (enum inferior_event_type) <INF_EXEC_CONTINUE>: Delete.
* thread.c: Don't include "continuations.h".
(clear_thread_inferior_resources): Remove references to
continuations.
|
|
This removes infcall-specific special casing from normal_stop,
simplifying it.
Like the "finish" command's, the FSM is responsible for storing the
function's return value.
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* infcall.c: Include thread_fsm.h.
(struct call_return_meta_info): New.
(get_call_return_value): New function, factored out from
call_function_by_hand_dummy.
(struct call_thread_fsm): New.
(call_thread_fsm_ops): New global.
(new_call_thread_fsm, call_thread_fsm_should_stop)
(call_thread_fsm_should_notify_stop): New functions.
(run_inferior_call): Add 'sm' parameter. Associate the FSM with
the thread.
(call_function_by_hand_dummy): Create a new call_thread_fsm
instance, associate it with the thread, and wait for the FSM to
finish. If finished successfully, fetch the function's result
value out of the FSM.
* infrun.c (fetch_inferior_event): If the FSM says the stop
shouldn't be notified, don't call normal_stop.
(maybe_remove_breakpoints): New function, factored out from ...
(normal_stop): ... here. Simplify.
* infrun.h (maybe_remove_breakpoints): Declare.
* thread-fsm.c (thread_fsm_should_notify_stop): New function.
(thread-fsm.h) <struct thread_fsm_ops>: New field.
(thread_fsm_should_notify_stop): Declare.
|
|
This adds an object oriented replacement for the "struct continuation"
mechanism, and converts the stepping commands (step, next, stepi,
nexti) and the "finish" commands to use it.
It adds a new thread "class" (struct thread_fsm) that contains the
necessary info and callbacks to manage the state machine of a thread's
execution command.
This allows getting rid of some hacks. E.g., in fetch_inferior_event
and normal_stop we no longer need to know whether a thread is doing a
multi-step (e.g., step N). This effectively makes the
intermediate_continuations unused -- they'll be garbage collected in a
separate patch. (They were never a proper abstraction, IMO. See how
fetch_inferior_event needs to check step_multi before knowing whether
to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.)
The target async vs !async uiout hacks in mi_on_normal_stop go away
too.
print_stop_event is no longer called from normal_stop. Instead it is
now called from within each interpreter's normal_stop observer. This
clears the path to make each interpreter print a stop event the way it
sees fit. Currently we have some hacks in common code to
differenciate CLI vs TUI vs MI around this area.
The "finish" command's FSM class stores the return value plus that
value's position in the value history, so that those can be printed to
both MI and CLI's streams. This fixes the CLI "finish" command when
run from MI -- it now also includes the function's return value in the
CLI stream:
(gdb)
~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n"
~"35\t}\n"
+~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
-FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output
+PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add thread-fsm.o.
* breakpoint.c (handle_jit_event): Print debug output.
(bpstat_what): Split event callback handling to ...
(bpstat_run_callbacks): ... this new function.
(momentary_bkpt_print_it): No longer handle bp_finish here.
* breakpoint.h (bpstat_run_callbacks): Declare.
* gdbthread.h (struct thread_info) <step_multi>: Delete field.
<thread_fsm>: New field.
(thread_cancel_execution_command): Declare.
* infcmd.c: Include thread-fsm.h.
(struct step_command_fsm): New.
(step_command_fsm_ops): New global.
(new_step_command_fsm, step_command_fsm_prepare): New functions.
(step_1): Adjust to use step_command_fsm_prepare and
prepare_one_step.
(struct step_1_continuation_args): Delete.
(step_1_continuation): Delete.
(step_command_fsm_should_stop): New function.
(step_once): Delete.
(step_command_fsm_clean_up, step_command_fsm_async_reply_reason)
(prepare_one_step): New function, based on step_once.
(until_next_command): Remove step_multi reference.
(struct return_value_info): New.
(print_return_value): Rename to ...
(print_return_value_1): ... this. New struct return_value_info
parameter. Adjust.
(print_return_value): Reimplement as wrapper around
print_return_value_1.
(struct finish_command_fsm): New.
(finish_command_continuation): Delete.
(finish_command_fsm_ops): New global.
(new_finish_command_fsm, finish_command_fsm_should_stop): New
functions.
(finish_command_fsm_clean_up, finish_command_fsm_return_value):
New.
(finish_command_continuation_free_arg): Delete.
(finish_command_fsm_async_reply_reason): New.
(finish_backward, finish_forward): Change symbol parameter to a
finish_command_fsm. Adjust.
(finish_command): Create a finish_command_fsm. Adjust.
* infrun.c: Include "thread-fsm.h".
(clear_proceed_status_thread): Delete the thread's FSM.
(infrun_thread_stop_requested_callback): Cancel the thread's
execution command.
(clean_up_just_stopped_threads_fsms): New function.
(fetch_inferior_event): Handle the event_thread's should_stop
method saying the command isn't done yet.
(process_event_stop_test): Run breakpoint callbacks here.
(print_stop_event): Rename to ...
(print_stop_location): ... this.
(restore_current_uiout_cleanup): New function.
(print_stop_event): Reimplement.
(normal_stop): No longer notify the end_stepping_range observers
here handle "step N" nor "finish" here. No longer call
print_stop_event here.
* infrun.h (struct return_value_info): Forward declare.
(print_return_value): Declare.
(print_stop_event): Change prototype.
* thread-fsm.c: New file.
* thread-fsm.h: New file.
* thread.c: Include "thread-fsm.h".
(thread_cancel_execution_command): New function.
(clear_thread_inferior_resources): Call it.
* cli/cli-interp.c (cli_on_normal_stop): New function.
(cli_interpreter_init): Install cli_on_normal_stop as normal_stop
observer.
* mi/mi-interp.c: Include "thread-fsm.h".
(restore_current_uiout_cleanup): Delete.
(mi_on_normal_stop): If the thread has an FSM associated, and it
finished, ask it for the async-reply-reason to print. Always call
print_stop_event here, regardless of the top-level interpreter.
Check bpstat_what to tell whether an asynchronous breakpoint hit
triggered.
* tui/tui-interp.c (tui_on_normal_stop): New function.
(tui_init): Install tui_on_normal_stop as normal_stop observer.
gdb/testsuite/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-cli.exp: Add CLI finish tests.
|
|
This patch makes the execution control code use largely the same
mechanisms in both sync- and async-capable targets. This means using
continuations and use the event loop to react to target events on sync
targets as well. The trick is to immediately mark infrun's event loop
source after resume instead of calling wait_for_inferior. Then
fetch_inferior_event is adjusted to do a blocking wait on sync
targets.
Tested on x86_64 Fedora 20, native and gdbserver, with and without
"maint set target-async off".
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1, until_break_command): Don't
check whether the target can async.
* inf-loop.c (inferior_event_handler): Only call target_async if
the target can async.
* infcall.c: Include top.h and interps.h.
(run_inferior_call): For the interpreter to sync mode while
running the infcall. Call wait_sync_command_done instead of
wait_for_inferior plus normal_stop.
* infcmd.c (prepare_execution_command): Don't check whether the
target can async when running in the foreground.
(step_1): Delete synchronous case handling.
(step_once): Always install a continuation, even in sync mode.
(until_next_command, finish_forward): Don't check whether the
target can async.
(attach_command_post_wait, notice_new_inferior): Always install a
continuation, even in sync mode.
* infrun.c (mark_infrun_async_event_handler): New function.
(proceed): In sync mode, mark infrun's event source instead of
waiting for events here.
(fetch_inferior_event): If the target can't async, do a blocking
wait.
(prepare_to_wait): In sync mode, mark infrun's event source.
(infrun_async_inferior_event_handler): No longer bail out if the
target can't async.
* infrun.h (mark_infrun_async_event_handler): New declaration.
* linux-nat.c (linux_nat_wait_1): Remove calls to
set_sigint_trap/clear_sigint_trap.
(linux_nat_terminal_inferior): No longer check whether the target
can async.
* mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify
comment.
(mi_execute_command_input_handler): No longer check whether the
target is async. Update and simplify comment.
* target.c (default_target_wait): New function.
* target.h (struct target_ops) <to_wait>: Now defaults to
default_target_wait.
(default_target_wait): Declare.
* top.c (wait_sync_command_done): New function, factored out from
...
(maybe_wait_sync_command_done): ... this.
* top.h (wait_sync_command_done): Declare.
* target-delegates.c: Regenerate.
|
|
This patch is part of the make-gdb-buildable-in-C++ effort. The idea is
to change some calls to the xmalloc family of functions to calls to the
equivalents in the XNEW family. This avoids adding an explicit cast, so
it keeps the code a bit more readable. Some of them also map relatively
well to a C++ equivalent (XNEW (struct foo) -> new foo), so it will be
possible to do scripted replacements if needed.
I only changed calls that were obviously allocating memory for one or
multiple "objects". Allocation of variable sizes (such as strings or
buffer handling) will be for later (and won't use XNEW).
- xmalloc (sizeof (struct foo)) -> XNEW (struct foo)
- xmalloc (num * sizeof (struct foo)) -> XNEWVEC (struct foo, num)
- xcalloc (1, sizeof (struct foo)) -> XCNEW (struct foo)
- xcalloc (num, sizeof (struct foo)) -> XCNEWVEC (struct foo, num)
- xrealloc (p, num * sizeof (struct foo) -> XRESIZEVEC (struct foo, p, num)
- obstack_alloc (ob, sizeof (struct foo)) -> XOBNEW (ob, struct foo)
- obstack_alloc (ob, num * sizeof (struct foo)) -> XOBNEWVEC (ob, struct foo, num)
- alloca (sizeof (struct foo)) -> XALLOCA (struct foo)
- alloca (num * sizeof (struct foo)) -> XALLOCAVEC (struct foo, num)
Some instances of xmalloc followed by memset to zero the buffer were
replaced by XCNEW or XCNEWVEC.
I regtested on x86-64, Ubuntu 14.04, but the patch touches many
architecture-specific files. For those I'll have to rely on the
buildbot or people complaining that I broke their gdb.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_add_process): Likewise.
* aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
* ada-exp.y (write_ambiguous_var): Likewise.
* ada-lang.c (resolve_subexp): Likewise.
(user_select_syms): Likewise.
(assign_aggregate): Likewise.
(ada_evaluate_subexp): Likewise.
(cache_symbol): Likewise.
* addrmap.c (allocate_key): Likewise.
(addrmap_create_mutable): Likewise.
* aix-thread.c (sync_threadlists): Likewise.
* alpha-tdep.c (alpha_push_dummy_call): Likewise.
(alpha_gdbarch_init): Likewise.
* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
* arm-linux-nat.c (arm_linux_add_process): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* arm-tdep.c (push_stack_item): Likewise.
(arm_displaced_step_copy_insn): Likewise.
(arm_gdbarch_init): Likewise.
(_initialize_arm_tdep): Likewise.
* avr-tdep.c (push_stack_item): Likewise.
* ax-general.c (new_agent_expr): Likewise.
* block.c (block_initialize_namespace): Likewise.
* breakpoint.c (alloc_counted_command_line): Likewise.
(update_dprintf_command_list): Likewise.
(parse_breakpoint_sals): Likewise.
(decode_static_tracepoint_spec): Likewise.
(until_break_command): Likewise.
(clear_command): Likewise.
(update_global_location_list): Likewise.
(get_breakpoint_objfile_data) Likewise.
* btrace.c (ftrace_new_function): Likewise.
(btrace_set_insn_history): Likewise.
(btrace_set_call_history): Likewise.
* buildsym.c (add_symbol_to_list): Likewise.
(record_pending_block): Likewise.
(start_subfile): Likewise.
(start_buildsym_compunit): Likewise.
(push_subfile): Likewise.
(end_symtab_get_static_block): Likewise.
(buildsym_init): Likewise.
* cli/cli-cmds.c (source_command): Likewise.
* cli/cli-decode.c (add_cmd): Likewise.
* cli/cli-script.c (build_command_line): Likewise.
(setup_user_args): Likewise.
(realloc_body_list): Likewise.
(process_next_line): Likewise.
(copy_command_lines): Likewise.
* cli/cli-setshow.c (do_set_command): Likewise.
* coff-pe-read.c (read_pe_exported_syms): Likewise.
* coffread.c (coff_locate_sections): Likewise.
(coff_symtab_read): Likewise.
(coff_read_struct_type): Likewise.
* common/cleanups.c (make_my_cleanup2): Likewise.
* common/common-exceptions.c (throw_it): Likewise.
* common/filestuff.c (make_cleanup_close): Likewise.
* common/format.c (parse_format_string): Likewise.
* common/queue.h (DEFINE_QUEUE_P): Likewise.
* compile/compile-object-load.c (munmap_list_add): Likewise.
(compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (append_args): Likewise.
* corefile.c (specify_exec_file_hook): Likewise.
* cp-support.c (make_symbol_overload_list): Likewise.
* cris-tdep.c (push_stack_item): Likewise.
(cris_gdbarch_init): Likewise.
* ctf.c (ctf_trace_file_writer_new): Likewise.
* dbxread.c (init_header_files): Likewise.
(add_new_header_file): Likewise.
(init_bincl_list): Likewise.
(dbx_end_psymtab): Likewise.
(start_psymtab): Likewise.
(dbx_end_psymtab): Likewise.
* dcache.c (dcache_init): Likewise.
* dictionary.c (dict_create_hashed): Likewise.
(dict_create_hashed_expandable): Likewise.
(dict_create_linear): Likewise.
(dict_create_linear_expandable): Likewise.
* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
* dummy-frame.c (register_dummy_frame_dtor): Likewise.
* dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
* dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
(decode_frame_entry_1): Likewise.
* dwarf2expr.c (new_dwarf_expr_context): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
* dwarf2read.c (dwarf2_has_info): Likewise.
(create_signatured_type_table_from_index): Likewise.
(dwarf2_read_index): Likewise.
(dw2_get_file_names_reader): Likewise.
(create_all_type_units): Likewise.
(read_cutu_die_from_dwo): Likewise.
(init_tu_and_read_dwo_dies): Likewise.
(init_cutu_and_read_dies): Likewise.
(create_all_comp_units): Likewise.
(queue_comp_unit): Likewise.
(inherit_abstract_dies): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_add_field): Likewise.
(dwarf2_add_typedef): Likewise.
(dwarf2_add_member_fn): Likewise.
(attr_to_dynamic_prop): Likewise.
(abbrev_table_alloc_abbrev): Likewise.
(abbrev_table_read_table): Likewise.
(add_include_dir): Likewise.
(add_file_name): Likewise.
(dwarf_decode_line_header): Likewise.
(dwarf2_const_value_attr): Likewise.
(dwarf_alloc_block): Likewise.
(parse_macro_definition): Likewise.
(set_die_type): Likewise.
(write_psymtabs_to_index): Likewise.
(create_cus_from_index): Likewise.
(dwarf2_create_include_psymtab): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(build_type_psymtab_dependencies): Likewise.
(read_comp_units_from_section): Likewise.
(compute_compunit_symtab_includes): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(read_func_scope): Likewise.
(process_structure_scope): Likewise.
(mark_common_block_symbol_computed): Likewise.
(load_partial_dies): Likewise.
(dwarf2_symbol_mark_computed): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_read_minimal_symbols): Likewise.
* environ.c (make_environ): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* event-loop.c (create_file_handler): Likewise.
(create_async_signal_handler): Likewise.
(create_async_event_handler): Likewise.
(create_timer): Likewise.
* exec.c (build_section_table): Likewise.
* fbsd-nat.c (fbsd_remember_child): Likewise.
* fork-child.c (fork_inferior): Likewise.
* frv-tdep.c (new_variant): Likewise.
* gdbarch.sh (gdbarch_alloc): Likewise.
(append_name): Likewise.
* gdbtypes.c (rank_function): Likewise.
(copy_type_recursive): Likewise.
(add_dyn_prop): Likewise.
* gnu-nat.c (make_proc): Likewise.
(make_inf): Likewise.
(gnu_write_inferior): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
(build_std_type_info_type): Likewise.
* guile/scm-param.c (compute_enum_list): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* guile/scm-value.c (gdbscm_value_call): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
(read_unwind_info): Likewise.
* ia64-tdep.c (ia64_gdbarch_init): Likewise.
* infcall.c (dummy_frame_context_saver_setup): Likewise.
(call_function_by_hand_dummy): Likewise.
* infcmd.c (step_once): Likewise.
(finish_forward): Likewise.
(attach_command): Likewise.
(notice_new_inferior): Likewise.
* inferior.c (add_inferior_silent): Likewise.
* infrun.c (add_displaced_stepping_state): Likewise.
(save_infcall_control_state): Likewise.
(save_inferior_ptid): Likewise.
(_initialize_infrun): Likewise.
* jit.c (bfd_open_from_target_memory): Likewise.
(jit_gdbarch_data_init): Likewise.
* language.c (add_language): Likewise.
* linespec.c (decode_line_2): Likewise.
* linux-nat.c (add_to_pid_list): Likewise.
(add_initial_lwp): Likewise.
* linux-thread-db.c (add_thread_db_info): Likewise.
(record_thread): Likewise.
(info_auto_load_libthread_db): Likewise.
* m32c-tdep.c (m32c_gdbarch_init): Likewise.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* m88k-tdep.c (m88k_analyze_prologue): Likewise.
* macrocmd.c (macro_define_command): Likewise.
* macroexp.c (gather_arguments): Likewise.
* macroscope.c (sal_macro_scope): Likewise.
* macrotab.c (new_macro_table): Likewise.
* mdebugread.c (push_parse_stack): Likewise.
(parse_partial_symbols): Likewise.
(parse_symbol): Likewise.
(psymtab_to_symtab_1): Likewise.
(new_block): Likewise.
(new_psymtab): Likewise.
(mdebug_build_psymtabs): Likewise.
(add_pending): Likewise.
(elfmdebug_build_psymtabs): Likewise.
* mep-tdep.c (mep_gdbarch_init): Likewise.
* mi/mi-main.c (mi_execute_command): Likewise.
* mi/mi-parse.c (mi_parse_argv): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (terminate_minimal_symbol_table): Likewise.
* mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
* msp430-tdep.c (msp430_gdbarch_init): Likewise.
* mt-tdep.c (mt_registers_info): Likewise.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
* nat/linux-btrace.c (linux_enable_bts): Likewise.
(linux_enable_pt): Likewise.
* nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
(linux_xfer_osdata_processgroups): Likewise.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* nto-procfs.c (procfs_meminfo): Likewise.
* objc-lang.c (start_msglist): Likewise.
(selectors_info): Likewise.
(classes_info): Likewise.
(find_methods): Likewise.
* objfiles.c (allocate_objfile): Likewise.
(update_section_map): Likewise.
* osabi.c (gdbarch_register_osabi): Likewise.
(gdbarch_register_osabi_sniffer): Likewise.
* parse.c (start_arglist): Likewise.
* ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
(hwdebug_insert_point): Likewise.
* printcmd.c (display_command): Likewise.
(ui_printf): Likewise.
* procfs.c (create_procinfo): Likewise.
(load_syscalls): Likewise.
(proc_get_LDT_entry): Likewise.
(proc_update_threads): Likewise.
* prologue-value.c (make_pv_area): Likewise.
(pv_area_store): Likewise.
* psymtab.c (extend_psymbol_list): Likewise.
(init_psymbol_list): Likewise.
(allocate_psymtab): Likewise.
* python/py-inferior.c (add_thread_object): Likewise.
* python/py-param.c (compute_enum_values): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/py-varobj.c (py_varobj_iter_next): Likewise.
* python/python.c (ensure_python_env): Likewise.
* record-btrace.c (record_btrace_start_replaying): Likewise.
* record-full.c (record_full_reg_alloc): Likewise.
(record_full_mem_alloc): Likewise.
(record_full_end_alloc): Likewise.
(record_full_core_xfer_partial): Likewise.
* regcache.c (get_thread_arch_aspace_regcache): Likewise.
* remote-fileio.c (remote_fileio_init_fd_map): Likewise.
* remote-notif.c (remote_notif_state_allocate): Likewise.
* remote.c (demand_private_info): Likewise.
(remote_notif_stop_alloc_reply): Likewise.
(remote_enable_btrace): Likewise.
* reverse.c (save_bookmark_command): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
* rx-tdep.c (rx_gdbarch_init): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
* ser-go32.c (dos_get_tty_state): Likewise.
(dos_copy_tty_state): Likewise.
* ser-mingw.c (ser_windows_open): Likewise.
(ser_console_wait_handle): Likewise.
(ser_console_get_tty_state): Likewise.
(make_pipe_state): Likewise.
(net_windows_open): Likewise.
* ser-unix.c (hardwire_get_tty_state): Likewise.
(hardwire_copy_tty_state): Likewise.
* solib-aix.c (solib_aix_new_lm_info): Likewise.
* solib-dsbt.c (dsbt_current_sos): Likewise.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
(frv_relocate_main_executable): Likewise.
* solib-spu.c (spu_bfd_fopen): Likewise.
* solib-svr4.c (lm_info_read): Likewise.
(svr4_copy_library_list): Likewise.
(svr4_default_sos): Likewise.
* source.c (find_source_lines): Likewise.
(line_info): Likewise.
(add_substitute_path_rule): Likewise.
* spu-linux-nat.c (spu_bfd_open): Likewise.
* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
* stabsread.c (dbx_lookup_type): Likewise.
(read_type): Likewise.
(read_member_functions): Likewise.
(read_struct_fields): Likewise.
(read_baseclasses): Likewise.
(read_args): Likewise.
(_initialize_stabsread): Likewise.
* stack.c (func_command): Likewise.
* stap-probe.c (handle_stap_probe): Likewise.
* symfile.c (addrs_section_sort): Likewise.
(addr_info_make_relative): Likewise.
(load_section_callback): Likewise.
(add_symbol_file_command): Likewise.
(init_filename_language_table): Likewise.
* symtab.c (create_filename_seen_cache): Likewise.
(sort_search_symbols_remove_dups): Likewise.
(search_symbols): Likewise.
* target.c (make_cleanup_restore_target_terminal): Likewise.
* thread.c (new_thread): Likewise.
(enable_thread_stack_temporaries): Likewise.
(make_cleanup_restore_current_thread): Likewise.
(thread_apply_all_command): Likewise.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* top.c (gdb_readline_wrapper): Likewise.
* tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
* tracepoint.c (trace_find_line_command): Likewise.
(all_tracepoint_actions_and_cleanup): Likewise.
(make_cleanup_restore_current_traceframe): Likewise.
(get_uploaded_tp): Likewise.
(get_uploaded_tsv): Likewise.
* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
(tui_alloc_win_info): Likewise.
(tui_alloc_content): Likewise.
(tui_add_content_elements): Likewise.
* tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
(tui_set_disassem_content): Likewise.
* ui-file.c (ui_file_new): Likewise.
(stdio_file_new): Likewise.
(tee_file_new): Likewise.
* utils.c (make_cleanup_restore_integer): Likewise.
(add_internal_problem_command): Likewise.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* valops.c (find_oload_champ): Likewise.
* value.c (allocate_value_lazy): Likewise.
(record_latest_value): Likewise.
(create_internalvar): Likewise.
* varobj.c (install_variable): Likewise.
(new_variable): Likewise.
(new_root_variable): Likewise.
(cppush): Likewise.
(_initialize_varobj): Likewise.
* windows-nat.c (windows_make_so): Likewise.
* x86-nat.c (x86_add_process): Likewise.
* xcoffread.c (arrange_linetable): Likewise.
(allocate_include_entry): Likewise.
(process_linenos): Likewise.
(SYMBOL_DUP): Likewise.
(xcoff_start_psymtab): Likewise.
(xcoff_end_psymtab): Likewise.
* xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
* xtensa-tdep.c (xtensa_register_type): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/gdbserver/ChangeLog:
* ax.c (gdb_parse_agent_expr): Likewise.
(compile_bytecodes): Likewise.
* dll.c (loaded_dll): Likewise.
* event-loop.c (append_callback_event): Likewise.
(create_file_handler): Likewise.
(create_file_event): Likewise.
* hostio.c (handle_open): Likewise.
* inferiors.c (add_thread): Likewise.
(add_process): Likewise.
* linux-aarch64-low.c (aarch64_linux_new_process): Likewise.
* linux-arm-low.c (arm_new_process): Likewise.
(arm_new_thread): Likewise.
* linux-low.c (add_to_pid_list): Likewise.
(linux_add_process): Likewise.
(handle_extended_wait): Likewise.
(add_lwp): Likewise.
(enqueue_one_deferred_signal): Likewise.
(enqueue_pending_signal): Likewise.
(linux_resume_one_lwp_throw): Likewise.
(linux_resume_one_thread): Likewise.
(linux_read_memory): Likewise.
(linux_write_memory): Likewise.
* linux-mips-low.c (mips_linux_new_process): Likewise.
(mips_linux_new_thread): Likewise.
(mips_add_watchpoint): Likewise.
* linux-x86-low.c (initialize_low_arch): Likewise.
* lynx-low.c (lynx_add_process): Likewise.
* mem-break.c (set_raw_breakpoint_at): Likewise.
(set_breakpoint): Likewise.
(add_condition_to_breakpoint): Likewise.
(add_commands_to_breakpoint): Likewise.
(clone_agent_expr): Likewise.
(clone_one_breakpoint): Likewise.
* regcache.c (new_register_cache): Likewise.
* remote-utils.c (look_up_one_symbol): Likewise.
* server.c (queue_stop_reply): Likewise.
(start_inferior): Likewise.
(queue_stop_reply_callback): Likewise.
(handle_target_event): Likewise.
* spu-low.c (fetch_ppc_memory): Likewise.
(store_ppc_memory): Likewise.
* target.c (set_target_ops): Likewise.
* thread-db.c (thread_db_load_search): Likewise.
(try_thread_db_load_1): Likewise.
* tracepoint.c (add_tracepoint): Likewise.
(add_tracepoint_action): Likewise.
(create_trace_state_variable): Likewise.
(cmd_qtdpsrc): Likewise.
(cmd_qtro): Likewise.
(add_while_stepping_state): Likewise.
* win32-low.c (child_add_thread): Likewise.
(get_image_name): Likewise.
|
|
This patch fixes a segmentation fault in native GDB when
handling an exec event with follow-exec-mode set to "new".
The stack trace from the segfault was this:
0 0x0000000000669594 in gdbarch_data (gdbarch=0x0, data=0x20da7a0)
at /scratch/dbreazea/sandbox/exec-nat/binutils-gdb/gdb/gdbarch.c:4847
1 0x00000000004d430e in get_remote_arch_state ()
at /scratch/dbreazea/sandbox/exec-nat/binutils-gdb/gdb/remote.c:603
2 0x00000000004d431e in get_remote_state ()
at /scratch/dbreazea/sandbox/exec-nat/binutils-gdb/gdb/remote.c:616
3 0x00000000004dda8b in discard_pending_stop_replies (inf=0x217c710)
at /scratch/dbreazea/sandbox/exec-nat/binutils-gdb/gdb/remote.c:5775
4 0x00000000006a5928 in observer_inferior_exit_notification_stub (
data=0x4dda7a <discard_pending_stop_replies>, args_data=0x7fff12c258f0)
at ./observer.inc:1137
5 0x00000000006a419a in generic_observer_notify (subject=0x21dfbe0,
args=0x7fff12c258f0)
at /scratch/dbreazea/sandbox/exec-nat/binutils-gdb/gdb/observer.c:167
6 0x00000000006a59ba in observer_notify_inferior_exit (inf=0x217c710)
at ./observer.inc:1162
7 0x00000000007981d5 in exit_inferior_1 (inftoex=0x217c710, silent=1)
at /scratch/dbreazea/sandbox/exec-nat/binutils-gdb/gdb/inferior.c:244
8 0x00000000007982f2 in exit_inferior_num_silent (num=1)
at /scratch/dbreazea/sandbox/exec-nat/binutils-gdb/gdb/inferior.c:286
9 0x000000000062f93d in follow_exec (ptid=...,
execd_pathname=0x7fff12c259a0 "/scratch/dbreazea/sandbox/exec-nat/build/gdb/testsuite/gdb.base/execd-prog")
at /scratch/dbreazea/sandbox/exec-nat/binutils-gdb/gdb/infrun.c:1195
In follow_exec we were creating a new inferior for the execd program,
as required by the exec mode, but we were doing it before calling
exit_inferior_num_silent on the original inferior. So on entry to
exit_inferior_num_silent we had two inferiors with the same ptid.
In the calls made by exit_inferior_num_silent, the current inferior
is temporarily saved and replaced in order to make use of functions
that only operate on the current inferior (for example, in
do_all_continuations, called while deleting the threads of the original
inferior). When we restored the original inferior, we just took the
first inferior that matched the ptid of the original and got the new
(wrong) one. It hadn't been initialized yet and had no gdbarch
pointer, and GDB segfaulted.
The fix for that is to call exit_inferior_num_silent before adding the new
inferior, so that we never have two inferiors with the same ptid. Then
exit_inferior_num_silent uses the original inferior as the current inferior
throughout, and can find a valid gdbarch pointer.
Once we have finished with the exit of the old inferior and added the
new one, we need to create a new thread for the new inferior. In the
function that called follow_exec, handle_inferior_event_1,
ecs->event_thread now points to the thread that was deleted with the
exit of the original inferior. To remedy this we create the new thread,
and once we return from follow_exec we reset ecs->event_thread.
Note that we are guaranteed that we can reset ecs->event_thread
safely using inferior_thread because we have set the current
inferior in follow_exec, and inferior_ptid was set by the call
to context_switch at the beginning of exec event handling.
gdb/ChangeLog:
* infrun.c (follow_exec): Re-order operations for
handling follow-exec-mode "new".
(handle_inferior_event_1): Assign ecs->event_thread
to the current thread.
* remote.c (get_remote_arch_state): Add an assertion.
|
|
GDB's current behavior when dealing with non-local references in the
context of nested fuctions is approximative:
- code using valops.c:value_of_variable read the first available stack
frame that holds the corresponding variable (whereas there can be
multiple candidates for this);
- code directly relying on read_var_value will instead read non-local
variables in frames where they are not even defined.
This change adds the necessary context to symbol reads (to get the block
they belong to) and to blocks (the static link property, if any) so that
GDB can make the proper decisions when dealing with non-local varibale
references.
gdb/ChangeLog:
* ada-lang.c (ada_read_var_value): Add a var_block argument
and pass it to default_read_var_value.
* block.c (block_static_link): New accessor.
* block.h (block_static_link): Declare it.
* buildsym.c (finish_block_internal): Add a static_link
argument. If there is a static link, associate it to the new
block.
(finish_block): Add a static link argument and pass it to
finish_block_internal.
(end_symtab_get_static_block): Update calls to finish_block and
to finish_block_internal.
(end_symtab_with_blockvector): Update call to
finish_block_internal.
* buildsym.h: Forward-declare struct dynamic_prop.
(struct context_stack): Add a static_link field.
(finish_block): Add a static link argument.
* c-exp.y: Remove an obsolete comment (evaluation of variables
already start from the selected frame, and now they climb *up*
the call stack) and propagate the block information to the
produced expression.
* d-exp.y: Likewise.
* f-exp.y: Likewise.
* go-exp.y: Likewise.
* jv-exp.y: Likewise.
* m2-exp.y: Likewise.
* p-exp.y: Likewise.
* coffread.c (coff_symtab_read): Update calls to finish_block.
* dbxread.c (process_one_symbol): Likewise.
* xcoffread.c (read_xcoff_symtab): Likewise.
* compile/compile-c-symbols.c (convert_one_symbol): Promote the
"sym" parameter to struct block_symbol, update its uses and pass
its block to calls to read_var_value.
(convert_symbol_sym): Update the calls to convert_one_symbol.
* compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update
call to read_var_value.
* dwarf2loc.c (block_op_get_frame_base): New.
(dwarf2_block_frame_base_locexpr_funcs): Implement the
get_frame_base method.
(dwarf2_block_frame_base_loclist_funcs): Likewise.
(dwarf2locexpr_baton_eval): Add a frame argument and use it
instead of the selected frame in order to evaluate the
expression.
(dwarf2_evaluate_property): Add a frame argument. Update call
to dwarf2_locexpr_baton_eval to provide a frame in available and
to handle the absence of address stack.
* dwarf2loc.h (dwarf2_evaluate_property): Add a frame argument.
* dwarf2read.c (attr_to_dynamic_prop): Add a forward
declaration.
(read_func_scope): Record any available static link description.
Update call to finish_block.
(read_lexical_block_scope): Update call to finish_block.
* findvar.c (follow_static_link): New.
(get_hosting_frame): New.
(default_read_var_value): Add a var_block argument. Use
get_hosting_frame to handle non-local references.
(read_var_value): Add a var_block argument and pass it to the
LA_READ_VAR_VALUE method.
* gdbtypes.c (resolve_dynamic_range): Update calls to
dwarf2_evaluate_property.
(resolve_dynamic_type_internal): Likewise.
* guile/scm-frame.c (gdbscm_frame_read_var): Update call to
read_var_value, passing it the block coming from symbol lookup.
* guile/scm-symbol.c (gdbscm_symbol_value): Update call to
read_var_value (TODO).
* infcmd.c (finish_command_continuation): Update call to
read_var_value, passing it the block coming from symbol lookup.
* infrun.c (insert_exception_resume_breakpoint): Likewise.
* language.h (struct language_defn): Add a var_block argument to
the LA_READ_VAR_VALUE method.
* objfiles.c (struct static_link_htab_entry): New.
(static_link_htab_entry_hash): New.
(static_link_htab_entry_eq): New.
(objfile_register_static_link): New.
(objfile_lookup_static_link): New.
(free_objfile): Free the STATIC_LINKS hashed map if needed.
* objfiles.h: Include hashtab.h.
(struct objfile): Add a static_links field.
(objfile_register_static_link): New.
(objfile_lookup_static_link): New.
* printcmd.c (print_variable_and_value): Update call to
read_var_value.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-frame.c (frapy_read_var): Update call to
read_var_value, passing it the block coming from symbol lookup.
* python/py-framefilter.c (extract_sym): Add a sym_block
parameter and set the pointed value to NULL (TODO).
(enumerate_args): Update call to extract_sym.
(enumerate_locals): Update calls to extract_sym and to
read_var_value.
* python/py-symbol.c (sympy_value): Update call to
read_var_value (TODO).
* stack.c (read_frame_local): Update call to read_var_value.
(read_frame_arg): Likewise.
(return_command): Likewise.
* symtab.h (struct symbol_block_ops): Add a get_frame_base
method.
(struct symbol): Add a block field.
(SYMBOL_BLOCK): New accessor.
* valops.c (value_of_variable): Remove frame/block handling and
pass the block argument to read_var_value, which does this job
now.
(value_struct_elt_for_reference): Update calls to
read_var_value.
(value_of_this): Pass the block found to read_var_value.
* value.h (read_var_value): Add a var_block argument.
(default_read_var_value): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/nested-subp1.exp: New file.
* gdb.base/nested-subp1.c: New file.
* gdb.base/nested-subp2.exp: New file.
* gdb.base/nested-subp2.c: New file.
* gdb.base/nested-subp3.exp: New file.
* gdb.base/nested-subp3.c: New file.
|
|
The main motivation for this is making non-stop / all-stop behave
similarly on initial connection, in order to move in the direction of
reimplementing all-stop mode with the remote target always running in
non-stop mode.
When we connect to a remote target in non-stop mode, we may find
threads either running or already stopped. The act of connecting
itself does not force threads to stop. To handle that, the remote
non-stop connection is currently roughly like this:
#1 - Fetch list of remote threads (qXfer:threads:read, qfThreadInfo,
etc). All threads are assumed to be running until the target
reports an asynchronous stop reply for them.
#2 - Fetch the initial set of threads that were already stopped, with
the '?' packet. (In non-stop, this is coupled with the vStopped
mechanism to be able to retrieve the status of more than one
thread.)
The stop replies fetched in #2 are placed in the pending stop reply
queue, and left for the regular event loop to process. That is,
"target remote" finishes and returns _before_ those stops are
processed.
That means that it's possible to have GDB process further commands
before the initial set of stopped threads is reported to the user.
E.g., before the patch, note how the prompt is printed before the
frame:
Remote debugging using :9999
(gdb)
[Thread 15296] #1 stopped.
0x0000003615a011f0 in ?? ()
Even though thread #1 was not running, for a moment, the user can see
it as such:
$ gdb a.out -ex "set non-stop 1" -ex "tar rem :9999" -ex "info threads" -ex "info registers"
Remote debugging using :9999
Id Target Id Frame
* 1 Thread 4772 (running)
Target is executing. <<<<<<< info registers
(gdb)
[Thread 4772] #1 stopped.
0x0000003615a011f0 in ?? ()
To fix that, this commit makes gdb process all threads found already
stopped at connection time, before giving the prompt to the user.
The fix takes a cue from fork-child.c:startup_inferior [1], and
processes the events locally in remote.c, avoiding the whole
wait_for_inferior/handle_inferior_event path. I decided to try this
approach after noticing that:
- several cases in handle_inferior_event miss checking stop_soon.
- we don't want to fetch the thread list in normal_stop.
and trying to fix them was resulting in sprinkling stop_soon checks in
many places, and uglifying normal_stop even more.
While with this patch, I'm avoiding changing GDB's output other than
when the prompt is printed, I think this approach is more flexible if
we do want to change it. And also, it's likely easier to get rid of
the MI *running event that is still sent for threads that are
initially found stopped, if we want to.
This happens to fix the testsuite too. All non-stop tests are racy
against "target remote" / gdbserver testing currently. That is,
sometimes the tests run, but other times they're just skipped without
any indication of PASS/FAIL. When that happens, the logs show:
target remote localhost:2346
Remote debugging using localhost:2346
(gdb)
[Thread 25418] #1 stopped.
0x0000003615a011f0 in ?? ()
^CQuit
(gdb) Remote debugging from host 127.0.0.1
Killing process(es): 25418
monitor exit
(gdb) Remote connection closed
(gdb) testcase /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/multi-create-ns-info-thr.exp completed in 61 seconds
The trouble here is that there's output after the prompt, and the
regex in question doesn't expect that:
-re "Remote debugging using .*$serialport_re.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
[1] - before startup_inferior was added, we'd go through
wait_for_inferior/handle_inferior_event while going through the shell,
and that turned out problematic.
Tested on x86_64 Fedora 20, gdbserver.
gdb/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* infrun.c (print_target_wait_results): Make extern.
* infrun.h (print_target_wait_results): Declare.
* remote.c (set_stop_requested_callback): Delete.
(process_initial_stop_replies): New function.
(remote_start_remote): Use it.
(stop_reply_queue_length): New function.
gdb/testsuite/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* gdb.server/connect-stopped-target.c: New file.
* gdb.server/connect-stopped-target.exp: New file.
|
|
gdb/ChangeLog:
* infrun.c (follow_fork, displaced_step_prepare, resume): Remove
trailing new-line at end of warning message.
(proceed): Add i18n marker to error messages.
|
|
The ppc64 displaced step code can't handle atomic sequences. Fallback
to stepping over the breakpoint in-line if we detect one.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (displaced_step_prepare_throw): Return -1 if
gdbarch_displaced_step_copy_insn returns NULL. Update intro
comment.
* rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION)
(STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up
in file.
(ppc_displaced_step_copy_insn): New function.
(ppc_displaced_step_fixup): Update comment.
(rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as
gdbarch_displaced_step_copy_insn hook.
* gdbarch.sh (displaced_step_copy_insn): Document what happens on
NULL return.
* gdbarch.h: Regenerate.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.arch/ppc64-atomic-inst.exp (do_test): New procedure, move
tests here.
(top level): Run do_test with and without displaced stepping.
|
|
Running the testsuite with "maint set target-non-stop on" shows:
(gdb) PASS: gdb.base/valgrind-infcall.exp: continue #98 (false warning)
continue
Continuing.
dl_main (phdr=<optimized out>..., auxv=<optimized out>) at rtld.c:2302
2302 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot access memory at address 0x400532
(gdb) PASS: gdb.base/valgrind-infcall.exp: continue #99 (false warning)
p gdb_test_infcall ()
$1 = 1
(gdb) FAIL: gdb.base/valgrind-infcall.exp: p gdb_test_infcall ()
Even though that was a native GNU/Linux test run, this test spawns
Valgrind and connects to it with "target remote". The error above is
actually orthogonal to target-non-stop. The real issue is that that
enables displaced stepping, and displaced stepping doesn't work with
Valgrind, because we can't write to the inferior memory (thus can't
copy the instruction to the scratch pad area).
I'm sure there will be other targets with the same issue, so trying to
identify Valgrind wouldn't be sufficient. The fix is to try setting
up the displaced step anyway. If we get a MEMORY_ERROR, we disable
displaced stepping for that inferior, and fall back to doing an
in-line step-over. If "set displaced-stepping" is "on" (as opposed to
"auto), GDB warns displaced stepping failed ("on" is mainly useful for
the testsuite, not for users).
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* inferior.h (struct inferior) <displaced_stepping_failed>: New
field.
* infrun.c (use_displaced_stepping_now_p): New parameter 'inf'.
Return false if dispaced stepping failed before.
(resume): Pass the current inferior to
use_displaced_stepping_now_p. Wrap displaced_step_prepare in
TRY/CATCH. If we get a MEMORY_ERROR, set the inferior's
displaced_stepping_failed flag, and fall back to an in-line
step-over.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.base/valgrind-disp-step.c: New file.
* gdb.base/valgrind-disp-step.exp: New file.
|
|
This finally implements user-visible all-stop mode running with the
target_ops backend always in non-stop mode. This is a stepping stone
towards finer-grained control of threads, being able to do interesting
things like thread groups, associating groups with breakpoints, etc.
From the user's perspective, all-stop mode is really just a special
case of being able to stop and resume specific sets of threads, so it
makes sense to do this step first.
With this, even in all-stop, the target is no longer in charge of
stopping all threads before reporting an event to the core -- the core
takes care of it when it sees fit. For example, when "next"- or
"step"-ing, we can avoid stopping and resuming all threads at each
internal single-step, and instead only stop all threads when we're
about to present the stop to the user.
The implementation is almost straight forward, as the heavy lifting
has been done already in previous patches. Basically, we replace
checks for "set non-stop on/off" (the non_stop global), with calls to
a new target_is_non_stop_p function. In a few places, if "set
non-stop off", we stop all threads explicitly, and in a few other
places we resume all threads explicitly, making use of existing
methods that were added for teaching non-stop to step over breakpoints
without displaced stepping.
This adds a new "maint set target-non-stop on/off/auto" knob that
allows both disabling the feature if we find problems, and
force-enable it for development (useful when teaching a target about
this. The default is "auto", which means the feature is enabled if a
new target method says it should be enabled. The patch implements the
method in linux-nat.c, just for illustration, because it still returns
false. We'll need a few follow up fixes before turning it on by
default. This is a separate target method from indicating regular
non-stop support, because e.g., while e.g., native linux-nat.c is
close to regression free with all-stop-non-stop (with following
patches will fixing the remaining regressions), remote.c+gdbserver
will still need more fixing, even though it supports "set non-stop
on".
Tested on x86_64 Fedora 20, native, with and without "set displaced
off", and with and without "maint set target-non-stop on"; and also
against gdbserver.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* NEWS: Mention "maint set/show target-non-stop".
* breakpoint.c (update_global_location_list): Check
target_is_non_stop_p instead of non_stop.
* infcmd.c (attach_command_post_wait, attach_command): Likewise.
* infrun.c (show_can_use_displaced_stepping)
(can_use_displaced_stepping_p, start_step_over_inferior):
Likewise.
(internal_resume_ptid): New function.
(resume): Use it.
(proceed): Check target_is_non_stop_p instead of non_stop. If in
all-stop mode but the target is always in non-stop mode, start all
the other threads that are implicitly resumed too.
(for_each_just_stopped_thread, fetch_inferior_event)
(adjust_pc_after_break, stop_all_threads): Check
target_is_non_stop_p instead of non_stop.
(handle_inferior_event): Likewise. Handle detach-fork in all-stop
with the target always in non-stop mode.
(handle_signal_stop) <random signal>: Check target_is_non_stop_p
instead of non_stop.
(switch_back_to_stepped_thread): Check target_is_non_stop_p
instead of non_stop.
(keep_going_stepped_thread): Use internal_resume_ptid.
(stop_waiting): If in all-stop mode, and the target is in non-stop
mode, stop all threads.
(keep_going_pass): Likewise, when starting a new in-line step-over
sequence.
* linux-nat.c (get_pending_status, select_event_lwp)
(linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
target_is_non_stop_p instead of non_stop.
(linux_nat_always_non_stop_p): New function.
(linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
(linux_nat_add_target): Install linux_nat_always_non_stop_p.
* target-delegates.c: Regenerate.
* target.c (target_is_non_stop_p): New function.
(target_non_stop_enabled, target_non_stop_enabled_1): New globals.
(maint_set_target_non_stop_command)
(maint_show_target_non_stop_command): New functions.
(_initilize_target): Install "maint set/show target-non-stop"
commands.
* target.h (struct target_ops) <to_always_non_stop_p>: New field.
(target_non_stop_enabled): New declaration.
(target_is_non_stop_p): New declaration.
gdb/doc/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Maintenance Commands): Document "maint set/show
target-non-stop".
|
|
That is, step past breakpoints by:
- pausing all threads
- removing breakpoint at PC
- single-step
- reinsert breakpoint
- restart threads
similarly to all-stop (with displaced stepping disabled). This allows
non-stop to work on targets/architectures without displaced stepping
support. That is, it makes displaced stepping an optimization instead
of a requirement. For example, in principle, all GNU/Linux ports
support non-stop mode at the target_ops level, but not all
corresponding gdbarch's implement displaced stepping. This should
make non-stop work for all (albeit, not as efficiently). And then
there are scenarios where even if the architecture supports displaced
stepping, we can't use it, because we e.g., don't find a usable
address to use as displaced step scratch pad. It should also fix
stepping past watchpoints on targets that have non-continuable
watchpoints in non-stop mode (e.g., PPC, untested). Running the
instruction out of line in the displaced stepping scratch pad doesn't
help that case, as the copied instruction reads/writes the same
watched memory... We can fix that too by teaching GDB to only remove
the watchpoint from the thread that we want to move past the
watchpoint (currently, removing a watchpoint always removes it from
all threads), but again, that can be considered an optimization; not
all targets would support it.
For those familiar with the gdb and gdbserver Linux target_ops
backends, the implementation should look similar, except it is done on
the core side. When we pause threads, we may find they stop with an
interesting event that should be handled later when the thread is
re-resumed, thus we store such events in the thread object, and mark
the event as pending. We should only consume pending events if the
thread is indeed resumed, thus we add a new "resumed" flag to the
thread object. At a later stage, we might add new target methods to
accelerate some of this, like "pause all threads", with corresponding
RSP packets, but we'd still need a fallback method for remote targets
that don't support such packets, so, again, that can be deferred as
optimization.
My _real_ motivation here is making it possible to reimplement
all-stop mode on top of the target always working on non-stop mode, so
that e.g., we can send RSP packets to a remote target even while the
target is running -- can't do that in the all-stop RSP variant, by
design).
Tested on x86_64 Fedora 20, with and without "set displaced off"
forced. The latter forces the new code paths whenever GDB needs to
step past a breakpoint.
gdb/ChangeLog:
2015-08-07 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (breakpoints_should_be_inserted_now): If any thread
has a pending status, return true.
* gdbthread.h: Include target/waitstatus.h.
(struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
stop_pc>: New fields.
(struct thread_info) <resumed>: New field.
(set_resumed): Declare.
* infrun.c: Include "event-loop.h".
(infrun_async_inferior_event_token, infrun_is_async): New globals.
(infrun_async): New function.
(clear_step_over_info): Add debug output.
(displaced_step_in_progress_any_inferior): New function.
(displaced_step_fixup): New returns int.
(start_step_over): Handle in-line step-overs too. Assert the
thread is marked resumed.
(resume_cleanups): Clear the thread's resumed flag.
(resume): Set the thread's resumed flag. Return early if the
thread has a pending status. Allow stepping a breakpoint with no
signal.
(proceed): Adjust to check 'resumed' instead of 'executing'.
(clear_proceed_status_thread): If the thread has a pending status,
and that status is a finished step, discard the pending status.
(clear_proceed_status): Don't clear step_over_info here.
(random_pending_event_thread, do_target_wait): New functions.
(prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
do_target_wait.
(wait_one): New function.
(THREAD_STOPPED_BY): New macro.
(thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
(thread_stopped_by_hw_breakpoint): New functions.
(switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
functions.
(handle_inferior_event): Also call set_resumed(false) on all
threads implicitly stopped by the event.
(restart_threads, resumed_thread_with_pending_status): New
functions.
(finish_step_over): If we were doing an in-line step-over before,
and no longer are after trying to start a new step-over, restart
all threads. If we have multiple threads with pending events,
save the current event and go through the event loop again.
(handle_signal_stop): Return early if finish_step_over returns
false.
<random signal>: If we get a signal while stepping over a
breakpoint in-line in non-stop mode, restart all threads. Clear
step_over_info before delivering the signal.
(keep_going_stepped_thread): Use internal_error instead of
gdb_assert. Mark the thread as resumed.
(keep_going_pass_signal): Assert the thread isn't already resumed.
If some other thread is doing an in-line step-over, defer the
resume. If we just started a new in-line step-over, stop all
threads. Don't clear step_over_info.
(infrun_async_inferior_event_handler): New function.
(_initialize_infrun): Create async event handler with
infrun_async_inferior_event_handler as callback.
(infrun_async): New declaration.
* target.c (target_async): New function.
* target.h (target_async): Declare macro and readd as function
declaration.
* target/waitstatus.h (enum target_stop_reason)
<TARGET_STOPPED_BY_SINGLE_STEP>: New value.
* thread.c (new_thread): Clear the new waitstatus field.
(set_resumed): New function.
|
|
Just a code refactor, no funcionality change intended.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (keep_going_stepped_thread): New function, factored out
from ...
(switch_back_to_stepped_thread): ... here.
|
|
Clarify that currently_stepping works at a higher level than
target_resume.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (currently_stepping): Extend intro comment.
* target.h (target_resume): Extend intro comment.
|
|
Several misc cleanups that prepare the tail end of this function, the
part that actually re-resumes the stepped thread.
The most non-obvious would be the currently_stepping change, I guess.
That's because it isn't ever correct to pass step=1 to target_resume
on software single-step targets, and currently_stepping works at a
conceptual higher level, it returns step=true even on software step
targets. It doesn't really matter on hardware step targets, as the
breakpoint will be hit immediately, but it's just wrong on software
step targets. I tested it against my x86 software single-step branch,
and it indeed fixes failed assertions (that catch spurious
PTRACE_SINGLESTEP requests) there.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (switch_back_to_stepped_thread): Use ecs->ptid instead
of inferior_ptid. If the stepped thread vanished, return 0
instead of resuming here. Use reset_ecs. Print the prev_pc and
the current stop_pc in log message. Clear trap_expected if the
thread advanced. Don't pass currently_stepping to
do_target_resume.
|
|
The main motivation of this patch is sharing more code between the
proceed (starting the inferior for the first time) and keep_going
(restarting the inferior after handling an event) paths and using the
step_over_chain queue now embedded in the thread_info object for
pending in-line step-overs too (instead of just for displaced
stepping).
So this commit:
- splits out a new keep_going_pass_signal function out of keep_going
that is just like keep_going except for the bits that clear the
signal to pass if the signal is set to "handle nopass".
- makes proceed use keep_going too.
- Makes start_step_over use keep_going_pass_signal instead of lower
level displaced stepping things.
One user visible change: if inserting breakpoints while trying to
proceed fails, we now get:
(gdb) si
Warning:
Could not insert hardware watchpoint 7.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
Command aborted.
(gdb)
while before we only saw warnings with no indication that the command
was cancelled:
(gdb) si
Warning:
Could not insert hardware watchpoint 7.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
(gdb)
Tested on x86_64-linux-gnu, ppc64-linux-gnu and s390-linux-gnu.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_info) <prev_pc>: Extend comment.
* infrun.c (struct execution_control_state): Move higher up in the
file.
(reset_ecs): New function.
(start_step_over): Now returns int. Rewrite to use
keep_going_pass_signal instead of manually starting a displaced step.
(resume): Don't call set_running here. If displaced stepping
can't start now, clear trap_expected.
(find_thread_needs_step_over): Delete function.
(proceed): Set up finish_thread_state_cleanup. Call set_running.
If the current thread needs a step over, push it in the step-over
chain. Don't set insert breakpoints nor call resume directly
here. Instead rewrite to use start_step_over and
keep_going_pass_signal.
(finish_step_over): New function.
(handle_signal_stop): Call finish_step_over instead of
start_step_over.
(switch_back_to_stepped_thread): If the event thread needs another
step-over do that first. Use start_step_over.
(keep_going_pass_signal): New function, factored out from ...
(keep_going): ... here.
(_initialize_infrun): Comment moved here.
* thread.c (set_running_thread): New function.
(set_running, finish_thread_state): Use set_running_thread.
|
|
In order to teach non-stop mode to do in-line step-overs (pause all
threads, remove breakpoint, single-step, reinsert breakpoint, restart
threads), we'll need to be able to queue in-line step over requests,
much like we queue displaced stepping (out-of-line) requests.
Actually, the queue should be the same -- threads wait for their turn
to step past something (breakpoint, watchpoint), doesn't matter what
technique we end up using when the step over actually starts.
I found that the queue management ends up simpler and more efficient
if embedded in the thread objects themselves. This commit converts
the existing displaced stepping queue to that. Later patches will
make the in-line step-overs code paths use it too.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_info) <step_over_prev,
step_over_next>: New fields.
(thread_step_over_chain_enqueue, thread_step_over_chain_remove)
(thread_step_over_chain_next, thread_is_in_step_over_chain): New
declarations.
* infrun.c (struct displaced_step_request): Delete.
(struct displaced_step_inferior_state) <step_request_queue>:
Delete field.
(displaced_step_prepare): Assert that trap_expected is set. Use
thread_step_over_chain_enqueue. Split starting a new displaced
step to ...
(start_step_over): ... this new function.
(resume): Assert the thread isn't waiting for a step over already.
(proceed): Assert the thread isn't waiting for a step over
already.
(infrun_thread_stop_requested): Adjust to remove threads from the
embedded step-over chain.
(handle_inferior_event) <fork/vfork>: Call start_step_over after
displaced_step_fixup.
(handle_signal_stop): Call start_step_over after
displaced_step_fixup.
* infrun.h (step_over_queue_head): New declaration.
* thread.c (step_over_chain_enqueue, step_over_chain_remove)
(thread_step_over_chain_next, thread_is_in_step_over_chain)
(thread_step_over_chain_enqueue)
(thread_step_over_chain_remove): New functions.
(delete_thread_1): Remove thread from the step-over chain.
|
|
I noticed that even though keep_going knows to start a step over for a
watchpoint, thread_still_needs_step_over forgets it.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (thread_still_needs_step_over): Rename to ...
(thread_still_needs_step_over_bp): ... this.
(enum step_over_what): New.
(thread_still_needs_step_over): Reimplement.
|
|
Prepare to use it in contexts without an ecs handy. Follow up patches
will make use of this.
gdb/ChangeLog:
2015-08-07 Pedro Alves <pedro@codesourcery.com>
* infrun.c (adjust_pc_after_break): Now takes thread_info and
waitstatus pointers instead of an ecs. Adjust.
(handle_inferior_event): Adjust caller.
|
|
Letting a "checkpoint" run to exit with "set non-stop on" behaves
differently compared to the default all-stop mode ("set non-stop
off").
Currently, in non-stop mode:
(gdb) start
Temporary breakpoint 1 at 0x40086b: file src/gdb/testsuite/gdb.base/checkpoint.c, line 28.
Starting program: build/gdb/testsuite/gdb.base/checkpoint
Temporary breakpoint 1, main () at src/gdb/testsuite/gdb.base/checkpoint.c:28
28 char *tmp = &linebuf[0];
(gdb) checkpoint
checkpoint 1: fork returned pid 24948.
(gdb) c
Continuing.
Copy complete.
Deleting copy.
[Inferior 1 (process 24944) exited normally]
[Switching to process 24948]
(gdb) info threads
Id Target Id Frame
1 process 24948 "checkpoint" (running)
No selected thread. See `help thread'.
(gdb) c
The program is not being run.
(gdb)
Two issues above:
1. Thread 1 got stuck in "(running)" state (it isn't really running)
2. While checkpoints try to preserve the illusion that the thread is
still the same when the process exits, GDB switched to "No thread
selected." instead of staying with thread 1 selected.
Problem #1 is caused by handle_inferior_event and normal_stop not
considering that when a
TARGET_WAITKIND_SIGNALLED/TARGET_WAITKIND_EXITED event is reported,
and the inferior is mourned, the target may still have execution.
Problem #2 is caused by the make_cleanup_restore_current_thread
cleanup installed by fetch_inferior_event not being able to find the
original thread 1's ptid in the thread list, thus not being able to
restore thread 1 as selected thread. The fix is to make the cleanup
installed by make_cleanup_restore_current_thread aware of thread ptid
changes, by installing a thread_ptid_changed observer that adjusts the
cleanup's data.
After the patch, we get the same in all-stop and non-stop modes:
(gdb) c
Continuing.
Copy complete.
Deleting copy.
[Inferior 1 (process 25109) exited normally]
[Switching to process 25113]
(gdb) info threads
Id Target Id Frame
* 1 process 25113 "checkpoint" main () at src/gdb/testsuite/gdb.base/checkpoint.c:28
(gdb)
Turns out the whole checkpoints.exp file can run in non-stop mode
unmodified. I thought of moving most of the test file's contents to a
procedure that can be called twice, once in non-stop mode and another
in all-stop mode. But then, the test already takes close to 30
seconds to run on my machine, so I thought it'd be nicer to run
all-stop and non-stop mode in parallel. Thus I added a new
checkpoint-ns.exp file that just appends "set non-stop on" to GDBFLAGS
and sources checkpoint.exp.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event): If we get
TARGET_WAITKIND_SIGNALLED or TARGET_WAITKIND_EXITED in non-stop
mode, mark all threads of the exiting process as not-executing.
(normal_stop): If we get TARGET_WAITKIND_SIGNALLED or
TARGET_WAITKIND_EXITED in non-stop mode, finish all threads of the
exiting process, if inferior_ptid still points at a process.
* thread.c (struct current_thread_cleanup) <next>: New field.
(current_thread_cleanup_chain): New global.
(restore_current_thread_ptid_changed): New function.
(restore_current_thread_cleanup_dtor): Remove the cleanup from the
current_thread_cleanup_chain list.
(make_cleanup_restore_current_thread): Add the cleanup data to the
current_thread_cleanup_chain list.
(_initialize_thread): Install restore_current_thread_ptid_changed
as thread_ptid_changed observer.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.base/checkpoint-ns.exp: New file.
* gdb.base/checkpoint.exp: Pass explicit "checkpoint.c" to
standard_testfile.
|
|
This patch is mostly extracted from Pedro's C++ branch. It adds explicit
casts from integer to enum types, where it is really the intention to do
so. This could be because we are ...
* iterating on enum values (we need to iterate on an equivalent integer)
* converting from a value read from bytes (dwarf attribute, agent
expression opcode) to the equivalent enum
* reading the equivalent integer value from another language (Python/Guile)
An exception to that is the casts in regcache.c. It seems to me like
struct regcache's register_status field could be a pointer to an array of
enum register_status. Doing so would waste a bit of memory (4 bytes
used by the enum vs 1 byte used by the current signed char, for each
register). If we switch to C++11 one day, we can define the underlying
type of an enum type, so we could have the best of both worlds.
gdb/ChangeLog:
* arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
(arm_set_abi): Likewise.
* ax-general.c (ax_print): Likewise.
* c-exp.y (exp : string_exp): Likewise.
* compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
(do_compile_dwarf_expr_to_c): Likewise.
* cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
Likewise.
* dwarf2expr.c (execute_stack_op): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
(disassemble_dwarf_expression): Likewise.
* dwarf2read.c (dwarf2_add_member_fn): Likewise.
(read_array_order): Likewise.
(abbrev_table_read_table): Likewise.
(read_attribute_value): Likewise.
(skip_unknown_opcode): Likewise.
(dwarf_decode_macro_bytes): Likewise.
(dwarf_decode_macros): Likewise.
* eval.c (value_f90_subarray): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* infrun.c (handle_command): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
* osabi.c (set_osabi): Likewise.
* parse.c (operator_length_standard): Likewise.
* ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
single return point.
* python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
(gdbpy_lookup_global_symbol): Likewise.
* record-full.c (record_full_restore): Likewise.
* regcache.c (regcache_register_status): Likewise.
(regcache_raw_read): Likewise.
(regcache_cooked_read): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* symtab.c (initialize_ordinary_address_classes): Likewise.
* target-debug.h (target_debug_print_signals): Likewise.
* utils.c (do_restore_current_language): Likewise.
|
|
As Pedro suggested on gdb-patches@ (see
https://sourceware.org/ml/gdb-patches/2015-05/msg00714.html), this
change makes symbol lookup functions return a structure that includes
both the symbol found and the block in which it was found. This makes
it possible to get rid of the block_found global variable and thus makes
block hunting explicit.
gdb/
* ada-exp.y (write_object_renaming): Replace struct
ada_symbol_info with struct block_symbol. Update field
references accordingly.
(block_lookup, select_possible_type_sym): Likewise.
(find_primitive_type): Likewise. Also update call to
ada_lookup_symbol to extract the symbol itself.
(write_var_or_type, write_name_assoc): Likewise.
* ada-lang.h (struct ada_symbol_info): Remove.
(ada_lookup_symbol_list): Replace struct ada_symbol_info with
struct block_symbol.
(ada_lookup_encoded_symbol, user_select_syms): Likewise.
(ada_lookup_symbol): Return struct block_symbol instead of a
mere symbol.
* ada-lang.c (defns_collected): Replace struct ada_symbol_info
with struct block_symbol.
(resolve_subexp, ada_resolve_function, sort_choices,
user_select_syms, is_nonfunction, add_defn_to_vec,
num_defns_collected, defns_collected,
symbols_are_identical_enums, remove_extra_symbols,
remove_irrelevant_renamings, add_lookup_symbol_list_worker,
ada_lookup_symbol_list, ada_iterate_over_symbols,
ada_lookup_encoded_symbol, get_var_value): Likewise.
(ada_lookup_symbol): Return a block_symbol instead of a mere
symbol. Replace struct ada_symbol_info with struct
block_symbol.
(ada_lookup_symbol_nonlocal): Likewise.
(standard_lookup): Make block passing explicit through
lookup_symbol_in_language.
* ada-tasks.c (get_tcb_types_info): Update the calls to
lookup_symbol_in_language to extract the mere symbol out of the
returned value.
(ada_tasks_inferior_data_sniffer): Likewise.
* ax-gdb.c (gen_static_field): Likewise for the call to
lookup_symbol.
(gen_maybe_namespace_elt): Deal with struct symbol_in_block from
lookup functions.
(gen_expr): Likewise.
* c-exp.y: Likewise. Remove uses of block_found.
(lex_one_token, classify_inner_name, c_print_token): Likewise.
(classify_name): Likewise. Rename the "sym" local variable to
"bsym".
* c-valprint.c (print_unpacked_pointer): Likewise.
* compile/compile-c-symbols.c (convert_symbol_sym): Promote the
"sym" parameter from struct symbol * to struct block_symbol.
Use it to remove uses of block_found. Deal with struct
symbol_in_block from lookup functions.
(gcc_convert_symbol): Likewise. Update the call to
convert_symbol_sym.
* compile/compile-object-load.c (compile_object_load): Deal with
struct symbol_in_block from lookup functions.
* cp-namespace.c (cp_lookup_nested_symbol_1,
cp_lookup_nested_symbol, cp_lookup_bare_symbol,
cp_search_static_and_baseclasses,
cp_lookup_symbol_in_namespace, cp_lookup_symbol_via_imports,
cp_lookup_symbol_imports_or_template,
cp_lookup_symbol_via_all_imports, cp_lookup_symbol_namespace,
lookup_namespace_scope, cp_lookup_nonlocal,
find_symbol_in_baseclass): Return struct symbol_in_block instead
of mere symbols and deal with struct symbol_in_block from lookup
functions.
* cp-support.c (inspect_type, replace_typedefs,
cp_lookup_rtti_type): Deal with struct symbol_in_block from
lookup functions.
* cp-support.h (cp_lookup_symbol_nonlocal,
cp_lookup_symbol_from_namespace,
cp_lookup_symbol_imports_or_template, cp_lookup_nested_symbol):
Return struct symbol_in_block instead of mere symbols.
* d-exp.y (d_type_from_name, d_module_from_name, push_variable,
push_module_name):
Deal with struct symbol_in_block from lookup functions. Remove
uses of block_found.
* eval.c (evaluate_subexp_standard): Update call to
cp_lookup_symbol_namespace.
* f-exp.y: Deal with struct symbol_in_block from lookup
functions. Remove uses of block_found.
(yylex): Likewise.
* gdbtypes.c (lookup_typename, lookup_struct, lookup_union,
lookup_enum, lookup_template_type, check_typedef): Deal with
struct symbol_in_block from lookup functions.
* guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
* guile/scm-symbol.c (gdbscm_lookup_symbol): Likewise.
(gdbscm_lookup_global_symbol): Likewise.
* gnu-v3-abi.c (gnuv3_get_typeid_type): Likewise.
* go-exp.y: Likewise. Remove uses of block_found.
(package_name_p, classify_packaged_name, classify_name):
Likewise.
* infrun.c (insert_exception_resume_breakpoint): Likewise.
* jv-exp.y (push_variable): Likewise.
* jv-lang.c (java_lookup_class, get_java_object_type): Likewise.
* language.c (language_bool_type): Likewise.
* language.h (struct language_defn): Update
la_lookup_symbol_nonlocal to return a struct symbol_in_block
rather than a mere symbol.
* linespec.c (find_label_symbols): Deal with struct
symbol_in_block from lookup functions.
* m2-exp.y: Likewise. Remove uses of block_found.
(yylex): Likewise.
* mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
* objc-lang.c (lookup_struct_typedef, find_imps): Likewise.
* p-exp.y: Likewise. Remove uses of block_found.
(yylex): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
* parse.c (write_dollar_variable): Likewise. Remove uses of
block_found.
* parser-defs.h (struct symtoken): Turn the SYM field into a
struct symbol_in_block.
* printcmd.c (address_info): Deal with struct symbol_in_block
from lookup functions.
* python/py-frame.c (frapy_read_var): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol,
gdbpy_lookup_global_symbol): Likewise.
* skip.c (skip_function_command): Likewise.
* solib-darwin.c (darwin_lookup_lib_symbol): Return a struct
symbol_in_block instead of a mere symbol.
* solib-spu.c (spu_lookup_lib_symbol): Likewise.
* solib-svr4.c (elf_lookup_lib_symbol): Likewise.
* solib.c (solib_global_lookup): Likewise.
* solist.h (solib_global_lookup): Likewise.
(struct target_so_ops): Update lookup_lib_global_symbol to
return a struct symbol_in_block rather than a mere symbol.
* source.c (select_source_symtab): Deal with struct
symbol_in_block from lookup functions.
* stack.c (print_frame_args, iterate_over_block_arg_vars):
Likewise.
* symfile.c (set_initial_language): Likewise.
* symtab.c (SYMBOL_LOOKUP_FAILED): Turn into a struct
symbol_in_block.
(SYMBOL_LOOKUP_FAILED_P): New predicate as a macro.
(struct symbol_cache_slot): Turn the FOUND field into a struct
symbol_in_block.
(block_found): Remove.
(eq_symbol_entry): Update to deal with struct symbol_in_block in
cache slots.
(symbol_cache_lookup): Return a struct symbol_in_block rather
than a mere symbol.
(symbol_cache_mark_found): Add a BLOCK parameter to fill
appropriately the cache slots. Update callers.
(symbol_cache_dump): Update cache slots handling to the type
change.
(lookup_symbol_in_language, lookup_symbol, lookup_language_this,
lookup_symbol_aux, lookup_local_symbol,
lookup_symbol_in_objfile, lookup_global_symbol_from_objfile,
lookup_symbol_in_objfile_symtabs,
lookup_symbol_in_objfile_from_linkage_name,
lookup_symbol_via_quick_fns, basic_lookup_symbol_nonlocal,
lookup_symbol_in_static_block, lookup_static_symbol,
lookup_global_symbol):
Return a struct symbol_in_block rather than a mere symbol. Deal
with struct symbol_in_block from other lookup functions. Remove
uses of block_found.
(lookup_symbol_in_block): Remove uses of block_found.
(struct global_sym_lookup_data): Turn the RESULT field into a
struct symbol_in_block.
(lookup_symbol_global_iterator_cb): Update references to the
RESULT field.
(search_symbols): Deal with struct symbol_in_block from lookup
functions.
* symtab.h (struct symbol_in_block): New structure.
(block_found): Remove.
(lookup_symbol_in_language, lookup_symbol,
basic_lookup_symbol_nonlocal, lookup_symbol_in_static_block,
looku_static_symbol, lookup_global_symbol,
lookup_symbol_in_block, lookup_language_this,
lookup_global_symbol_from_objfile): Return a struct
symbol_in_block rather than just a mere symbol. Update comments
to remove mentions of block_found.
* valops.c (find_function_in_inferior,
value_struct_elt_for_reference, value_maybe_namespace_elt,
value_of_this): Deal with struct symbol_in_block from lookup
functions.
* value.c (value_static_field, value_fn_field): Likewise.
|
|
This is a patch I extracted from Pedro's C++ branch. It contains the
most trivial enum fixes, where an integer type/value was used instead
of the appropriate enum type/value. It fixes many C++ errors, since
in C++ you can't mix integers and enums implicitely.
Regardless of the C++ conversion, I think this is a good cleanup to make
use of the appropriate enum types.
Regression-tested on native x86_64.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
type or value instead of integer.
(aarch64_linux_insert_watchpoint): Likewise.
(aarch64_linux_remove_watchpoint): Likewise.
* ada-lang.c (ada_op_print_tab): Likewise.
* amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
(amd64_linux_syscall_record_common): Likewise.
* arch-utils.c (target_byte_order_user): Likewise.
(default_byte_order): Likewise.
* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
(arm_linux_get_hwbp_type): Likewise.
(arm_linux_hw_watchpoint_initialize): Likewise.
(arm_linux_insert_watchpoint): Likewise.
* arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
(arm_linux_syscall_record): Likewise.
* breakpoint.c (update_watchpoint): Likewise.
(breakpoint_here_p): Likewise.
(bpstat_print): Likewise.
(enable_breakpoint_disp): Likewise.
* c-lang.c (c_op_print_tab): Likewise.
* cli/cli-decode.c (add_info_alias): Likewise.
* d-lang.c (d_op_print_tab): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* f-exp.y (dot_ops): Likewise.
(f77_keywords): Likewise.
* f-lang.c (f_op_print_tab): Likewise.
* go-lang.c (go_op_print_tab): Likewise.
* guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
* guile/scm-cmd.c (gdbscm_make_command): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
* guile/scm-string.c (struct scm_to_stringn_data): Likewise.
(struct scm_from_stringn_data): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_remove_watchpoint): Likewise.
(ia64_linux_can_use_hw_breakpoint): Likewise.
* infrun.c (print_stop_event): Likewise.
* jv-lang.c (java_op_print_tab): Likewise.
* linux-nat.c (linux_proc_xfer_partial): Likewise.
* linux-nat.h (struct lwp_info): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* m2-lang.c (m2_op_print_tab): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_variables): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* mi/mi-out.c (mi_table_begin): Likewise.
(mi_table_header): Likewise.
* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
(mips_linux_insert_watchpoint): Likewise.
(mips_linux_remove_watchpoint): Likewise.
* nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
* nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
(mips_linux_watch_type_to_irw): Likewise.
* nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_hw_watchpoint): Likewise.
(procfs_can_use_hw_breakpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
* p-lang.c (pascal_op_print_tab): Likewise.
* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
* ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
* procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_watchpoint): Likewise.
(procfs_remove_watchpoint): Likewise.
* psymtab.c (recursively_search_psymtabs): Likewise.
* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
(m32r_insert_watchpoint): Likewise.
* remote-mips.c (mips_can_use_watchpoint): Likewise.
(mips_insert_watchpoint): Likewise.
(mips_remove_watchpoint): Likewise.
* remote.c (watchpoint_to_Z_packet): Likewise.
(remote_insert_watchpoint): Likewise.
(remote_remove_watchpoint): Likewise.
(remote_check_watch_resources): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
(s390_can_use_hw_breakpoint): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
* target.h (struct target_ops): Likewise.
* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
* ui-out.c (struct ui_out_hdr): Likewise.
(append_header_to_list): Likewise.
(get_next_header): Likewise.
(verify_field): Likewise.
(ui_out_begin): Likewise.
(ui_out_field_int): Likewise.
(ui_out_field_fmt_int): Likewise.
(ui_out_field_skip): Likewise.
(ui_out_field_string): Likewise.
(ui_out_field_fmt): Likewise.
* varobj.c (new_variable): Likewise.
* x86-nat.c (x86_insert_watchpoint): Likewise.
(x86_remove_watchpoint): Likewise.
(x86_can_use_hw_breakpoint): Likewise.
* xtensa-tdep.h (struct gdbarch_tdep): Likewise.
* inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
previously anonymous enumeration type..
* linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
value.
* target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
(target_debug_print_enum_bptype): New.
* target-delegates.c: Regenerate.
|
|
Refs:
https://sourceware.org/ml/gdb/2015-03/msg00024.html
https://sourceware.org/ml/gdb/2015-06/msg00005.html
On GNU/Linux, if an infcall spawns a thread, that thread ends up with
stuck running state. This happens because:
- when linux-nat.c detects a new thread, it marks them as running,
and does not report anything to the core.
- we skip finish_thread_state when the thread that is running the
infcall stops.
As result, that new thread ends up with stuck "running" state, even
though it really is stopped.
On Windows, _all_ threads end up stuck in running state, not just the
one that was spawned. That happens because when a new thread is
detected, unlike linux-nat.c, windows-nat.c reports
TARGET_WAITKIND_SPURIOUS to infrun. It's the fact that that event
does not cause a user-visible stop that triggers the problem. When
the target is re-resumed, we call set_running with a wildcard ptid,
which marks all thread as running. That set_running is not suppressed
because the (leader) thread being resumed does not have in_infcall
set. Later, when the infcall finally finishes successfully, nothing
marks all threads back to stopped.
We can trigger the same problem on all targets by having a thread
other than the one that is running the infcall report a breakpoint hit
to infrun, and then have that breakpoint not cause a stop. That's
what the included test does.
The fix is to stop GDB from suppressing the set_running calls while
doing an infcall, and then set the threads back to stopped when the
call finishes, iff they were originally stopped before the infcall
started. (Note the MI *running/*stopped event suppression isn't
affected.)
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2015-06-29 Pedro Alves <palves@redhat.com>
PR threads/18127
* infcall.c (run_inferior_call): On infcall success, if the thread
was marked stopped before, reset it back to stopped.
* infrun.c (resume): Don't suppress the set_running calls when
doing an infcall.
(normal_stop): Only discard the finish_thread_state cleanup if the
infcall succeeded.
gdb/testsuite/ChangeLog:
2015-06-29 Pedro Alves <palves@redhat.com>
PR threads/18127
* gdb.threads/hand-call-new-thread.c: New file.
* gdb.threads/hand-call-new-thread.c: New file.
|
|
Since fed040c6a50399617d8265cbddc7fd21b3f134ef gdb_sysroot is
never NULL. This commit removes all gdb_sysroot NULL checks.
gdb/ChangeLog:
* exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
* infrun.c (follow_exec): Likewise.
* remote.c (remote_filesystem_is_local): Likewise.
* solib.c (solib_find_1): Likewise.
|
