| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This rewrites registry.h, removing all the macros and replacing it
with relatively ordinary template classes. The result is less code
than the previous setup. It replaces large macros with a relatively
straightforward C++ class, and now manages its own cleanup.
The existing type-safe "key" class is replaced with the equivalent
template class. This approach ended up requiring relatively few
changes to the users of the registry code in gdb -- code using the key
system just required a small change to the key's declaration.
All existing users of the old C-like API are now converted to use the
type-safe API. This mostly involved changing explicit deletion
functions to be an operator() in a deleter class.
The old "save/free" two-phase process is removed, and replaced with a
single "free" phase. No existing code used both phases.
The old "free" callbacks took a parameter for the enclosing container
object. However, this wasn't truly needed and is removed here as
well.
|
|
Now that filtered and unfiltered output can be treated identically, we
can unify the printf family of functions. This is done under the name
"gdb_printf". Most of this patch was written by script.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
Rename thread_info::executing to thread_info::m_executing, and make it
private. Add a new get/set member functions, and convert GDB to make
use of these.
The only real change of interest in this patch is in thread.c where I
have deleted the helper function set_executing_thread, and now just
use the new set function thread_info::set_executing. However, the old
helper function set_executing_thread included some code to reset the
thread's stop_pc, so I moved this code into the new function
thread_info::set_executing. However, I don't believe there is
anywhere that this results in a change of behaviour, previously the
executing flag was always set true through a call to
set_executing_thread anyway.
|
|
Same idea as the previous patch, but for m_terminal.
Change-Id: If9367d5db8c976a4336680adca4ea5bc31ab64d2
|
|
A following patch will want to take some action when a pending wait
status is set on or removed from a thread. Add a getter and a setter on
thread_info for the pending waitstatus, so that we can add some code in
the setter later.
The thing is, the pending wait status field is in the
thread_suspend_state, along with other fields that we need to backup
before and restore after the thread does an inferior function call.
Therefore, make the thread_suspend_state member private
(thread_info::suspend becomes thread_info::m_suspend), and add getters /
setters for all of its fields:
- pending wait status
- stop signal
- stop reason
- stop pc
For the pending wait status, add the additional has_pending_waitstatus
and clear_pending_waitstatus methods.
I think this makes the thread_info interface a bit nicer, because we
now access the fields as:
thread->stop_pc ()
rather than
thread->suspend.stop_pc
The stop_pc field being in the `suspend` structure is an implementation
detail of thread_info that callers don't need to be aware of.
For the backup / restore of the thread_suspend_state structure, add
save_suspend_to and restore_suspend_from methods. You might wonder why
`save_suspend_to`, as opposed to a simple getter like
thread_suspend_state &suspend ();
I want to make it clear that this is to be used only for backing up and
restoring the suspend state, _not_ to access fields like:
thread->suspend ()->stop_pc
Adding some getters / setters allows adding some assertions. I find
that this helps understand how things are supposed to work. Add:
- When getting the pending status (pending_waitstatus method), ensure
that there is a pending status.
- When setting a pending status (set_pending_waitstatus method), ensure
there is no pending status.
There is one case I found where this wasn't true - in
remote_target::process_initial_stop_replies - which needed adjustments
to respect that contract. I think it's because
process_initial_stop_replies is kind of (ab)using the
thread_info::suspend::waitstatus to store some statuses temporarily, for
its internal use (statuses it doesn't intent on leaving pending).
process_initial_stop_replies pulls out stop replies received during the
initial connection using target_wait. It always stores the received
event in `evthread->suspend.waitstatus`. But it only sets
waitstatus_pending_p, if it deems the event interesting enough to leave
pending, to be reported to the core:
if (ws.kind != TARGET_WAITKIND_STOPPED
|| ws.value.sig != GDB_SIGNAL_0)
evthread->suspend.waitstatus_pending_p = 1;
It later uses this flag a bit below, to choose which thread to make the
"selected" one:
if (selected == NULL
&& thread->suspend.waitstatus_pending_p)
selected = thread;
And ultimately that's used if the user-visible mode is all-stop, so that
we print the stop for that interesting thread:
/* In all-stop, we only print the status of one thread, and leave
others with their status pending. */
if (!non_stop)
{
thread_info *thread = selected;
if (thread == NULL)
thread = lowest_stopped;
if (thread == NULL)
thread = first;
print_one_stopped_thread (thread);
}
But in any case (all-stop or non-stop), print_one_stopped_thread needs
to access the waitstatus value of these threads that don't have a
pending waitstatus (those that had TARGET_WAITKIND_STOPPED +
GDB_SIGNAL_0). This doesn't work with the assertions I've
put.
So, change the code to only set the thread's wait status if it is an
interesting one that we are going to leave pending. If the thread
stopped due to a non-interesting event (TARGET_WAITKIND_STOPPED +
GDB_SIGNAL_0), don't store it. Adjust print_one_stopped_thread to
understand that if a thread has no pending waitstatus, it's because it
stopped with TARGET_WAITKIND_STOPPED + GDB_SIGNAL_0.
The call to set_last_target_status also uses the pending waitstatus.
However, given that the pending waitstatus for the thread may have been
cleared in print_one_stopped_thread (and that there might not even be a
pending waitstatus in the first place, as explained above), it is no
longer possible to do it at this point. To fix that, move the call to
set_last_target_status in print_one_stopped_thread. I think this will
preserve the existing behavior, because set_last_target_status is
currently using the current thread's wait status. And the current
thread is the last one for which print_one_stopped_thread is called. So
by calling set_last_target_status in print_one_stopped_thread, we'll get
the same result. set_last_target_status will possibly be called
multiple times, but only the last call will matter. It just means
possibly more calls to set_last_target_status, but those are cheap.
Change-Id: Iedab9653238eaf8231abcf0baa20145acc8b77a7
|
|
A following patch will want to use scoped_ignore_sigttou in code
shared between GDB and GDBserver. Move it under gdbsupport/.
Note that despite what inflow.h/inflow.c's first line says, inflow.c
is no longer about ptrace, it is about terminal management. Some
other files were unnecessarily including inflow.h, I guess a leftover
from the days when inflow.c really was about ptrace. Those inclusions
are simply dropped.
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
* Makefile.in (HFILES_NO_SRCDIR): Remove inflow.h.
* inf-ptrace.c, inflow.c, procfs.c: Don't include "inflow.h".
* inflow.h: Delete, moved to gdbsupport/ under a different name.
* ser-unix.c: Don't include "inflow.h". Include
"gdbsupport/scoped_ignore_sigttou.h".
gdbsupport/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
* scoped_ignore_sigttou.h: New file, moved from gdb/ and renamed.
Change-Id: Ie390abf42c3a78bec6d282ad2a63edd3e623559a
|
|
In a case open() returns 0 tty might be leaked. While 0 should be
stdin (and therefore is an unlikely return value from open()), it's
still the case that the test should be for non-negative return values
from open().
gdb/ChangeLog:
2021-05-11 Alexandra Hájková <ahajkova@redhat.com>
* inflow.c (new_tty): Do not leak tty.
|
|
Give a name to each observer, this will help produce more meaningful
debug message.
gdbsupport/ChangeLog:
* observable.h (class observable) <struct observer> <observer>:
Add name parameter.
<name>: New field.
<attach>: Add name parameter, update all callers.
Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
This moves gdb_select.h to gdbsupport/, so it can be used by other
code there.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* gdb_select.h: Move to ../gdbsupport/.
* event-loop.c: Update include path.
* top.c: Update include path.
* ser-base.c: Update include path.
* ui-file.c: Update include path.
* ser-tcp.c: Update include path.
* guile/scm-ports.c: Update include path.
* posix-hdep.c: Update include path.
* ser-unix.c: Update include path.
* gdb_usleep.c: Update include path.
* mingw-hdep.c: Update include path.
* inflow.c: Update include path.
* infrun.c: Update include path.
* event-top.c: Update include path.
gdbsupport/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* gdb_select.h: Move from ../gdb/.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
The info_terminal_command declaration in inflow.h does not match the
current definition. It is not needed anyway, as info_terminal_command
is only used locally, so remove it and make the definition static.
gdb/ChangeLog:
* inferior.h (info_terminal_command): Remove declaration.
* inflow.c (info_terminal_command): Make static.
Change-Id: I22c3fcc44244e3cf877b5e27eff189af11c39503
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
GCC 9 has a few new warnings that aren't enabled in the gdb build by
default: -Wdeprecated-copy, -Wdeprecated-copy-dtor, and
-Wredundant-move. This patch enables them all.
Tested by rebuilding with a new GCC (git master) on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* inflow.c (struct terminal_info): Add default operator=.
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Add -Wdeprecated-copy,
-Wdeprecated-copy-dtor, -Wredundant-move.
gdb/gdbserver/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* configure: Rebuild.
|
|
Calls to error () can cause SIGTTOU to send gdb to the background.
For example, on an Arm build:
(gdb) b main
Breakpoint 1 at 0x10774: file /build/gdb/testsuite/../../../src/binutils-gdb/gdb/testsuite/gdb.base/watchpoint.c, line 174.
(gdb) r
Starting program: /build/gdb/testsuite/outputs/gdb.base/watchpoint/watchpoint
[1]+ Stopped ../gdb ./outputs/gdb.base/watchpoint/watchpoint
localhost$ fg
../gdb ./outputs/gdb.base/watchpoint/watchpoint
Cannot parse expression `.L1199 4@r4'.
warning: Probes-based dynamic linker interface failed.
Reverting to original interface.
The SIGTTOU is raised whilst inside a syscall during the call to tcdrain.
Fix is to use scoped_ignore_sigttou to ensure SIGTTOU is blocked.
In addition fix include comments - job_control is not included via terminal.h
gdb/ChangeLog:
* event-top.c: Remove include comment.
* inflow.c (class scoped_ignore_sigttou): Move from here...
* inflow.h (class scoped_ignore_sigttou): ...to here.
* ser-unix.c (hardwire_drain_output): Block SIGTTOU during drain.
* top.c: Remove include comment.
|
|
This changes inflow.c to use the type-safe registry API. This fixes a
latent bug in swap_terminal_info, which previously said:
terminal_info *info_a
= (terminal_info *) inferior_data (a, inflow_inferior_data);
terminal_info *info_b
= (terminal_info *) inferior_data (a, inflow_inferior_data);
... both of which examine 'a'.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* inflow.c (struct terminal_info): Add destructor and
initializers.
(inflow_inferior_data): Change type.
(~terminal_info): Rename from inflow_inferior_data_cleanup.
(get_inflow_inferior_data, inflow_inferior_exit)
(swap_terminal_info, _initialize_inflow): Update.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
|
|
Here's a summary of PR 23368:
#include <unistd.h>
int main (void)
{
char *exec_args[] = { "/bin/ls", NULL };
execve (exec_args[0], exec_args, NULL);
}
$ gdb -nx t -ex "catch exec" -ex "set follow-exec-mode new" -ex run
...
[1] + 13146 suspended (tty output) gdb -q -nx t -ex "catch exec" -ex "set follow-exec-mode new" -ex run
$
Here's what happens: when the inferior execs with "follow-exec-mode
new", we first "mourn" it before creating the new one. This ends up
calling inflow_inferior_exit, which sets the per-inferior terminal state
to "is_ours":
inf->terminal_state = target_terminal_state::is_ours;
At this point, the inferior's terminal_state is is_ours, while the
"reality", tracked by gdb_tty_state, is is_inferior (GDB doesn't own the
terminal).
Later, we continue processing the exec inferior event and decide we want
to stop (because of the "catch exec") and call target_terminal::ours to
make sure we own the terminal. However, we don't actually go to the
target backend to change the settings, because the core thinks that no
inferior owns the terminal (inf->terminal_state is
target_terminal_state::is_ours, as checked in
target_terminal_is_ours_kind, for both inferiors). When something in
readline tries to mess with the terminal settings, it generates a
SIGTTOU.
This patch fixes this by tranferring the state of the terminal from the
old inferior to the new inferior.
gdb/ChangeLog:
PR gdb/23368
* infrun.c (follow_exec): In the follow_exec_mode_new case,
transfer terminal state from old new new inferior.
* terminal.h (swap_terminal_info): New function.
* inflow.c (swap_terminal_info): New function.
|
|
This patch fixes various unused variable warnings that are related to
conditional compilation. In these cases, either the variable is now
protected by the same #if as its uses, or the declaration is simply
lowered into the conditionally-compiled block.
gdb/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* windows-nat.c (saved_context): Conditionally define.
* remote.c (remote_target::remote_btrace_maybe_reopen):
Conditionally declare "warned".
* inflow.c (sigquit_ours): Conditionally define.
(new_tty): Move "tty" declaration inside #if.
* guile/guile.c (guile_datadir): Conditionally define.
* charset.c (set_be_le_names): Move some declarations inside #if.
* btrace.c (parse_xml_btrace): Move "errcode" declaration inside
#if.
(parse_xml_btrace_conf): Likewise.
|
|
Remove ptid_equal in favor of using "==".
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_equal): Remove.
* common/ptid.h (ptid_equal): Don't declare.
* ada-tasks.c: Update.
* breakpoint.c: Update.
* common/agent.c: Update.
* corelow.c: Update.
* darwin-nat-info.c: Update.
* darwin-nat.c: Update.
* dcache.c: Update.
* dtrace-probe.c: Update.
* dummy-frame.c: Update.
* fbsd-nat.c: Update.
* frame.c: Update.
* gdbthread.h: Update.
* gnu-nat.c: Update.
* go32-nat.c: Update.
* inf-loop.c: Update.
* inf-ptrace.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-thread-db.c: Update.
* mi/mi-cmd-var.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* nto-procfs.c: Update.
* ppc-linux-tdep.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* ravenscar-thread.c: Update.
* regcache.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* sol-thread.c: Update.
* solib.c: Update.
* target.c: Update.
* tui/tui-stack.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* windows-tdep.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* win32-low.c: Update.
|
|
This removes ptid_get_pid in favor of calling the ptid_t::pid method.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* common/ptid.c (ptid_get_pid): Remove.
* common/ptid.h (ptid_get_pid): Don't declare.
* aarch64-linux-nat.c: Update.
* ada-lang.c: Update.
* aix-thread.c: Update.
* alpha-bsd-nat.c: Update.
* amd64-fbsd-nat.c: Update.
* amd64-linux-nat.c: Update.
* arm-linux-nat.c: Update.
* arm-nbsd-nat.c: Update.
* auxv.c: Update.
* break-catch-syscall.c: Update.
* breakpoint.c: Update.
* bsd-uthread.c: Update.
* corelow.c: Update.
* ctf.c: Update.
* darwin-nat.c: Update.
* fbsd-nat.c: Update.
* fbsd-tdep.c: Update.
* gcore.c: Update.
* gnu-nat.c: Update.
* hppa-nbsd-nat.c: Update.
* hppa-obsd-nat.c: Update.
* i386-fbsd-nat.c: Update.
* ia64-linux-nat.c: Update.
* inf-ptrace.c: Update.
* infcmd.c: Update.
* inferior.c: Update.
* inferior.h: Update.
* inflow.c: Update.
* infrun.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* m68k-bsd-nat.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* mips-linux-nat.c: Update.
* mips-nbsd-nat.c: Update.
* mips64-obsd-nat.c: Update.
* nat/aarch64-linux-hw-point.c: Update.
* nat/aarch64-linux.c: Update.
* nat/linux-btrace.c: Update.
* nat/linux-osdata.c: Update.
* nat/linux-procfs.c: Update.
* nat/x86-linux-dregs.c: Update.
* nto-procfs.c: Update.
* obsd-nat.c: Update.
* ppc-linux-nat.c: Update.
* ppc-nbsd-nat.c: Update.
* ppc-obsd-nat.c: Update.
* proc-service.c: Update.
* procfs.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* ravenscar-thread.c: Update.
* record.c: Update.
* remote-sim.c: Update.
* remote.c: Update.
* rs6000-nat.c: Update.
* s390-linux-nat.c: Update.
* sh-nbsd-nat.c: Update.
* sol-thread.c: Update.
* sparc-nat.c: Update.
* sparc64-tdep.c: Update.
* spu-linux-nat.c: Update.
* spu-tdep.c: Update.
* target-debug.h: Update.
* target.c: Update.
* thread.c: Update.
* tid-parse.c: Update.
* tracefile-tfile.c: Update.
* vax-bsd-nat.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* x86-nat.c: Update.
gdb/gdbserver/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* linux-low.c: Update.
* linux-mips-low.c: Update.
* lynx-low.c: Update.
* mem-break.c: Update.
* nto-low.c: Update.
* remote-utils.c: Update.
* server.c: Update.
* spu-low.c: Update.
* target.c: Update.
* tracepoint.c: Update.
|
|
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
|
|
The recent commit e671cd59 ("Per-inferior target_terminal state, fix
PR gdb/13211, more") missed adjusting a few targets to the new
target_ops->to_interrupt interface, breaking the build for those
targets. This fixes it.
Note: remote-sim doesn't really support async execution, so I don't
think gdbsim_interrupt is ever reached via target_interrupt. (It is
reached via gdbsim_cntrl_c though).
The inflow.c changes are a bit ugly, but they're just doing what other
parts of the file already do to handle the same missing functions.
Targets that don't have 'kill', like mingw have their own
target_ops->to_interrupt implementation, so it's fine to make
child_interrupt be a nop.
gdb/ChangeLog:
2018-01-31 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_interrupt): Remove ptid_t parameter.
* inflow.c (child_terminal_save_inferior): Wrap reference to
tcgetpgrp in HAVE_TERMIOS_H.
(child_interrupt, child_pass_ctrlc): Wrap references to signal in
_WIN32.
* remote-sim.c (gdbsim_interrupt): Remove ptid_t parameter and
always iterate over all inferiors.
(gdbsim_cntrl_c): Adjust.
* windows-nat.c (windows_interrupt): Remove 'ptid_t' parameter.
|
|
In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
I expect to use this in more places (in inflow.c) in follow up
patches, but I think this is still good on its own.
gdb/ChangeLog:
2017-11-16 Pedro Alves <palves@redhat.com>
* inflow.c (scoped_ignore_sigttou): New class.
(child_terminal_ours_1, new_tty): Use it.
|
|
This patch constifies add_info and updates all the info commands. The
bulk of this patch was written using a script; and then I did a manual
pass to fix up the remaining compilation errors.
I could not compile every changed file; in particular nto-procfs.c,
gnu-nat.c, and darwin-nat-info.c; but I at least tried to check the
correctness by inspection.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* frame.h (info_locals_command, info_args_command): Constify.
* auto-load.h (auto_load_info_scripts): Constify.
* inferior.h (registers_info): Constify.
* copying.c: Rebuild.
* copying.awk: Constify generated commands.
* auto-load.c (auto_load_info_scripts)
(info_auto_load_gdb_scripts): Constify.
* cli/cli-decode.c (struct cmd_list_element): Take a
cmd_const_cfunc_ftype.
* command.h (add_info): Take a cmd_const_cfunc_ftype.
* tui/tui-win.c (tui_all_windows_info): Constify.
* python/py-auto-load.c (info_auto_load_python_scripts):
Constify.
* cli/cli-cmds.c (show_command): Remove non-const overload.
* tracepoint.c (info_tvariables_command, info_scope_command):
Constify.
(info_static_tracepoint_markers_command): Constify.
* thread.c (info_threads_command): Constify.
(print_thread_info_1): Constify.
* target.c (info_target_command): Constify.
* symtab.c (info_sources_command, info_functions_command)
(info_types_command): Constify.
(info_variables_command): Remove non-const overload.
* symfile.c (info_ext_lang_command): Constify.
* stack.c (info_frame_command, info_locals_command)
(info_args_command): Constify.
(backtrace_command): Remove non-const overload.
* source.c (info_source_command, info_line_command): Constify.
* solib.c (info_sharedlibrary_command): Constify.
* skip.c (info_skip_command): Constify.
* ser-go32.c (info_serial_command): Constify.
* reverse.c (info_bookmarks_command): Constify.
* printcmd.c (info_symbol_command, info_address_command)
(info_display_command): Constify.
* osdata.c (info_osdata_command): Constify.
* objc-lang.c (info_selectors_command, info_classes_command):
Constify.
* nto-procfs.c (procfs_pidlist, procfs_meminfo): Constify.
* memattr.c (info_mem_command): Constify.
* macrocmd.c (info_macro_command, info_macros_command): Constify.
* linux-fork.c (info_checkpoints_command): Constify.
* infrun.c (info_signals_command): Constify.
* inflow.c (info_terminal_command): Constify.
* inferior.c (info_inferiors_command): Constify.
(print_inferior): Constify.
* infcmd.c (info_program_command, info_all_registers_command)
(info_registers_command, info_vector_command)
(info_float_command): Constify.
(registers_info): Constify.
* gnu-nat.c (info_send_rights_cmd, info_recv_rights_cmd)
(info_port_sets_cmd, info_dead_names_cmd, info_port_rights_cmd):
Constify.
* f-valprint.c (info_common_command): Constify.
* dcache.c (info_dcache_command): Constify.
(dcache_info_1): Constify.
* darwin-nat-info.c (info_mach_tasks_command)
(info_mach_task_command, info_mach_ports_command)
(info_mach_port_command, info_mach_threads_command)
(info_mach_thread_command, info_mach_regions_command)
(info_mach_regions_recurse_command, info_mach_region_command)
(info_mach_exceptions_command): Constify.
(get_task_from_args): Constify.
* cp-support.c (info_vtbl_command): Constify.
* breakpoint.c (info_watchpoints_command)
(info_tracepoints_command): Constify.
(info_breakpoints_command): Remove non-const overload.
* avr-tdep.c (avr_io_reg_read_command): Constify.
* auxv.c (info_auxv_command): Constify.
* ada-tasks.c (info_tasks_command): Constify.
(info_task): Constify.
* ada-lang.c (info_exceptions_command): Constify.
|
|
The comment about Lynx in child_terminal_init reads a bit odd, since
it's not exactly clear what "This" in "This is for Lynx" is referring
to. Looking back in history makes it clearer. When the comment was
originally added, in commit 91ecc8efa9b9, back in 1994, the code
looked like this:
~~~
#ifdef PROCESS_GROUP_TYPE
#ifdef PIDGET
/* This is for Lynx, and should be cleaned up by having Lynx be
a separate debugging target with a version of
target_terminal_init_inferior which passes in the process
group to a generic routine which does all the work (and the
non-threaded child_terminal_init_inferior can just pass in
inferior_pid to the same routine). */
inferior_process_group = PIDGET (inferior_pid);
#else
inferior_process_group = inferior_pid;
#endif
#endif
~~~
So this looked like it was about when GDB was growing support for
multi-threading, and inferior_pid was still a single int for most
ports.
Eventually we got ptid_t, so the comment isn't really useful today.
Particularly more so since we no longer support Lynx as a GDB host.
The only caller left of child_terminal_init_with_pgrp is gnu-nat.c
(the Hurd), and that target uses fork-child, so when we reach
gnu_terminal_init after spawning a new child, the current inferior
must already have the PID set, and the child must be a process group
leader.
We can't add a 'getpgid(inf->pid) == inf->pid' assertion to
child_terminal_init though (like a previous version of this patch was
doing [1]), because child_terminal_init is also reached after
attaching to a process. If we did, the new
gdb.base/attach-non-pgrp-leader.exp test would fail, with:
(gdb) attach 12415
Attaching to program: build/gdb/testsuite/outputs/gdb.base/attach-non-pgrp-leader/attach-non-pgrp-leader, process 12415
src/gdb/inflow.c:180: internal-error: void child_terminal_init(target_ops*): Assertion `getpgid (inf->pid) == inf->pid' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.base/attach-non-pgrp-leader.exp: child: attach to child (GDB internal error)
I'm not making GDB save the pgid for attached processes with getpgid
for now, because the saved process group affects other things which
I'm leaving for following patches, like e.g., the "interrupt" command.
[1] - https://sourceware.org/ml/gdb-patches/2017-11/msg00039.html
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* gnu-nat.c (gnu_terminal_init): Delete.
(gnu_target): Don't install gnu_terminal_init.
* inflow.c (child_terminal_init_with_pgrp): Delete, merged with ...
(child_terminal_init): ... this function.
|
|
I find this odd 'set flags twice' ancient code and comment annoyingly
distracting. It may well be that the reason for the double-set was
simply a copy/paste mistake, and that we've been doing this for
decades [1] for no good reason. Let's just get rid of it, and if we
find a real reason, add it back with a comment explaining why it's
necessary.
[1] This double-set was already in gdb 2.4 / 1988, the oldest release
we have sources for, and imported in git. From 'git show 7b4ac7e1ed2c
inflow.c':
+void
+terminal_inferior ()
+{
+ if (terminal_is_ours) /* && inferior_thisrun_terminal == 0) */
+ {
+ fcntl (0, F_SETFL, tflags_inferior);
+ fcntl (0, F_SETFL, tflags_inferior);
The "is there a reason" comment was added in 1993, by:
commit a88797b5eadf31e21804bc820429028bf708fbcd
Author: Fred Fish <fnf@specifix.com>
AuthorDate: Thu Aug 5 01:33:45 1993 +0000
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* inflow.c (child_terminal_inferior, child_terminal_ours_1): No
longer set flags twice in row.
|
|
This commit garbage collects the termio and sgtty support.
GDB's terminal handling code still has support for the old termio and
sgtty interfaces in addition to termios. However, I think it's pretty
safe to assume that for a long, long time, Unix-like systems provide
termios. GNU/Linux, Solaris, Cygwin, AIX, DJGPP, macOS and the BSDs
all have had termios.h for many years. Looking around the web, I
found discussions about FreeBSD folks trying to get rid of old sgtty.h
a decade ago:
https://lists.freebsd.org/pipermail/freebsd-hackers/2007-March/019983.html
So I think support for termio and sgtty in GDB is just dead code that
is never compiled anywhere and is just getting in the way. For
example, serial_noflush_set_tty_state and the raw<->cooked concerns
mentioned in inflow.c only exist because of sgtty (see
hardwire_noflush_set_tty_state).
Regtested on GNU/Linux.
Confirmed that I can still build Solaris, DJGPP and AIX GDB and that
the resulting GDBs still include the termios.h-guarded code.
Confirmed mingw-w64 GDB still builds and skips the termios.h-guarded
code.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* Makefile.in (SER_HARDWIRE): Update comment.
(HFILES_NO_SRCDIR): Remove gdb_termios.h.
* common/gdb_termios.h: Delete file.
* common/job-control.c: Include termios.h and unistd.h instead of
gdb_termios.h.
(gdb_setpgid): Remove HAVE_TERMIOS || TIOCGPGRP preprocessor
check.
(have_job_control): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove sgtty code.
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* inflow.c: Include termios.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE checks with HAVE_TERMIOS_H checks throughout.
Replace PROCESS_GROUP_TYPE references with pid_t references
throughout.
(gdb_getpgrp): Delete.
(set_initial_gdb_ttystate): Use tcgetpgrp instead of gdb_getpgrp.
(child_terminal_inferior): Remove comment. Remove sgtty code.
(child_terminal_ours_1): Use tcgetpgrp directly instead of
gdb_getpgrp. Use serial_set_tty_state instead aof
serial_noflush_set_tty_state. Remove sgtty code.
* inflow.h: Include unistd.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE check with HAVE_TERMIOS_H check.
(inferior_process_group): Now returns pid_t.
* ser-base.c (ser_base_noflush_set_tty_state): Delete.
* ser-base.h (ser_base_noflush_set_tty_state): Delete.
* ser-event.c (serial_event_ops): Update.
* ser-go32.c (dos_noflush_set_tty_state): Delete.
(dos_ops): Update.
* ser-mingw.c (hardwire_ops, tty_ops, pipe_ops, tcp_ops): Update.
* ser-pipe.c (pipe_ops): Update.
* ser-tcp.c (tcp_ops): Update.
* ser-unix.c: Include termios.h instead of gdb_termios.h. Remove
HAVE_TERMIOS checks.
[HAVE_TERMIO] (struct hardwire_ttystate): Delete.
[HAVE_SGTTY] (struct hardwire_ttystate): Delete.
(get_tty_state, set_tty_state): Drop termio and sgtty code, and
assume termios.
(hardwire_noflush_set_tty_state): Delete.
(hardwire_print_tty_state, hardwire_drain_output)
(hardwire_flush_output, hardwire_flush_input)
(hardwire_send_break, hardwire_raw, hardwire_setbaudrate)
(hardwire_setstopbits, hardwire_setparity): Drop termio and sgtty
code, and assume termios.
(hardwire_ops): Update.
(_initialize_ser_hardwire): Remove HAVE_TERMIOS check.
* serial.c (serial_noflush_set_tty_state): Delete.
* serial.h (serial_noflush_set_tty_state): Delete.
(serial_ops::noflush_set_tty_state): Delete.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* remote-utils.c: Include termios.h instead of gdb_termios.h.
(remote_open): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove termio and sgtty code.
|
|
This removes make_cleanup_restore_target_terminal and generally
C++-ifies target terminal handling. It changes all target_terminal_*
functions to be static members of a new target_terminal class and
changes the cleanup to be a scoped_* class.
make_cleanup_override_quit_handler is also removed in favor of simply
using scoped_restore.
Note that there are some files in this patch that I could not compile.
Considering that some of the rewrites were automated, and that none of
these files involed cleanups, I feel that this is relatively safe.
Regression tested by the buildbot.
gdb/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* windows-nat.c (get_windows_debug_event, windows_wait)
(do_initial_windows_stuff, windows_attach): Update.
* utils.c (vwarning, internal_vproblem): Update.
(ui_unregister_input_event_handler_cleanup)
(prepare_to_handle_input): Remove.
(class scoped_input_handler): New.
(defaulted_query, prompt_for_continue): Update.
* tui/tui-hooks.c (tui_refresh_frame_and_register_information):
Update.
* top.c (undo_terminal_modifications_before_exit): Update.
* target/target.h (target_terminal_init, target_terminal_inferior)
(target_terminal_ours): Don't declare.
(class target_terminal): New.
* target.h (target_terminal_is_inferior, target_terminal_is_ours)
(target_terminal_ours_for_output)
(make_cleanup_restore_target_terminal): Don't declare.
(target_terminal_info): Remove.
* target.c (enum terminal_state, terminal_state): Remove.
(target_terminal::terminal_state): Define.
(target_terminal::init): Rename from target_terminal_init.
(target_terminal::inferior): Rename from
target_terminal_inferior.
(target_terminal::ours): Rename from target_terminal_ours.
(target_terminal::ours_for_output): Rename from
target_terminal_ours_for_output.
(target_terminal::info): New method.
(cleanup_restore_target_terminal)
(make_cleanup_restore_target_terminal): Remove.
* solib.c (handle_solib_event): Update.
* remote.c (remote_serial_quit_handler): Update.
(remote_terminal_inferior, remote_wait_as): Update.
* record-full.c (record_full_wait_1): Update.
* nto-procfs.c (procfs_create_inferior): Update.
* nat/fork-inferior.c (startup_inferior): Update.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_record_changed, mi_inferior_added, mi_inferior_appeared)
(mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
(mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
(mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_on_resume, mi_solib_loaded)
(mi_solib_unloaded, mi_command_param_changed, mi_memory_changed)
(mi_user_selected_context_changed, report_initial_inferior):
Update.
* linux-nat.c (linux_nat_attach, linux_nat_terminal_ours)
(linux_nat_terminal_inferior): Update.
* infrun.c (follow_fork_inferior)
(handle_vfork_child_exec_or_exit, do_target_resume)
(check_curr_ui_sync_execution_done, handle_inferior_event_1)
(handle_signal_stop, maybe_remove_breakpoints, normal_stop):
Update.
* inflow.c (child_terminal_init, info_terminal_command): Update.
* infcmd.c (post_create_inferior, continue_1, prepare_one_step)
(attach_command): Update.
* infcall.c (call_thread_fsm_should_stop): Update.
* gnu-nat.c (gnu_attach): Update.
* extension.c (struct active_ext_lang_state)
(restore_active_ext_lang): Update.
* exceptions.c (print_flush): Update.
* event-top.c (async_enable_stdin, default_quit_handler): Update.
(struct quit_handler_cleanup_data, restore_quit_handler)
(restore_quit_handler_dtor, make_cleanup_override_quit_handler):
Remove.
* cp-support.c (gdb_demangle): Update.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, handle_jit_event)
(disable_breakpoints_in_unloaded_shlib): Update.
* annotate.c (annotate_breakpoints_invalid)
(annotate_frames_invalid): Update.
gdb/gdbserver/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* target.c (target_terminal::terminal_state): Define.
(target_terminal::init): Rename from target_terminal_init.
(target_terminal::inferior): Rename from
target_terminal_inferior.
(target_terminal::ours): Rename from target_terminal_ours.
(target_terminal::ours_for_output, target_terminal::info): New.
|
|
These prototypes were required when compiling GDB as C but are not
required for C++.
gdb/ChangeLog:
* aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat
prototype.
* aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep
prototype.
* aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep
prototype.
* aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype.
* ada-exp.y: Remove _initialize_ada_exp prototype.
* ada-lang.c: Remove _initialize_ada_language prototype.
* ada-tasks.c: Remove _initialize_tasks prototype.
* addrmap.c: Remove _initialize_addrmap prototype.
* agent.c: Remove _initialize_agent prototype.
* aix-thread.c: Remove _initialize_aix_thread prototype.
* alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype.
* alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype.
* alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep
prototype.
* alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype.
* alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype.
* alpha-tdep.c: Remove _initialize_alpha_tdep prototype.
* amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep
prototype.
* amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep
prototype.
* amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype.
* amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype.
* amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype.
* amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep
prototype.
* amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype.
* amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype.
* amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype.
* amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype.
* amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* amd64-tdep.c: Remove _initialize_amd64_tdep prototype.
* amd64-windows-nat.c: Remove _initialize_amd64_windows_nat
prototype.
* amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep
prototype.
* annotate.c: Remove _initialize_annotate prototype.
* arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype.
* arc-tdep.c: Remove _initialize_arc_tdep prototype.
* arch-utils.c: Remove _initialize_gdbarch_utils prototype.
* arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype.
* arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype.
* arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype.
* arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype.
* arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep
prototype.
* arm-tdep.c: Remove _initialize_arm_tdep prototype.
* arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype.
* auto-load.c: Remove _initialize_auto_load prototype.
* auxv.c: Remove _initialize_auxv prototype.
* avr-tdep.c: Remove _initialize_avr_tdep prototype.
* ax-gdb.c: Remove _initialize_ax_gdb prototype.
* bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype.
* bfin-tdep.c: Remove _initialize_bfin_tdep prototype.
* break-catch-sig.c: Remove _initialize_break_catch_sig prototype.
* break-catch-syscall.c: Remove _initialize_break_catch_syscall
prototype.
* break-catch-throw.c: Remove _initialize_break_catch_throw
prototype.
* breakpoint.c: Remove _initialize_breakpoint prototype.
* bsd-uthread.c: Remove _initialize_bsd_uthread prototype.
* btrace.c: Remove _initialize_btrace prototype.
* charset.c: Remove _initialize_charset prototype.
* cli/cli-cmds.c: Remove _initialize_cli_cmds prototype.
* cli/cli-dump.c: Remove _initialize_cli_dump prototype.
* cli/cli-interp.c: Remove _initialize_cli_interp prototype.
* cli/cli-logging.c: Remove _initialize_cli_logging prototype.
* cli/cli-script.c: Remove _initialize_cli_script prototype.
* coff-pe-read.c: Remove _initialize_coff_pe_read prototype.
* coffread.c: Remove _initialize_coffread prototype.
* compile/compile.c: Remove _initialize_compile prototype.
* complaints.c: Remove _initialize_complaints prototype.
* completer.c: Remove _initialize_completer prototype.
* copying.awk: Remove _initialize_copying prototype.
* copying.c: Regenerate.
* core-regset.c: Remove _initialize_core_regset prototype.
* corefile.c: Remove _initialize_core prototype.
* corelow.c: Remove _initialize_corelow prototype.
* cp-abi.c: Remove _initialize_cp_abi prototype.
* cp-namespace.c: Remove _initialize_cp_namespace prototype.
* cp-support.c: Remove _initialize_cp_support prototype.
* cp-valprint.c: Remove _initialize_cp_valprint prototype.
* cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype.
* cris-tdep.c: Remove _initialize_cris_tdep prototype.
* ctf.c: Remove _initialize_ctf prototype.
* d-lang.c: Remove _initialize_d_language prototype.
* darwin-nat-info.c: Remove _initialize_darwin_info_commands
prototype.
* darwin-nat.c: Remove _initialize_darwin_inferior prototype.
* dbxread.c: Remove _initialize_dbxread prototype.
* dcache.c: Remove _initialize_dcache prototype.
* demangle.c: Remove _initialize_demangler prototype.
* disasm-selftests.c: Remove _initialize_disasm_selftests
prototype.
* disasm.c: Remove _initialize_disasm prototype.
* dtrace-probe.c: Remove _initialize_dtrace_probe prototype.
* dummy-frame.c: Remove _initialize_dummy_frame prototype.
* dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame
prototype.
* dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype.
* dwarf2expr.c: Remove _initialize_dwarf2expr prototype.
* dwarf2loc.c: Remove _initialize_dwarf2loc prototype.
* dwarf2read.c: Remove _initialize_dwarf2_read prototype.
* elfread.c: Remove _initialize_elfread prototype.
* exec.c: Remove _initialize_exec prototype.
* extension.c: Remove _initialize_extension prototype.
* f-lang.c: Remove _initialize_f_language prototype.
* f-valprint.c: Remove _initialize_f_valprint prototype.
* fbsd-nat.c: Remove _initialize_fbsd_nat prototype.
* fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype.
* filesystem.c: Remove _initialize_filesystem prototype.
* findcmd.c: Remove _initialize_mem_search prototype.
* fork-child.c: Remove _initialize_fork_child prototype.
* frame-base.c: Remove _initialize_frame_base prototype.
* frame-unwind.c: Remove _initialize_frame_unwind prototype.
* frame.c: Remove _initialize_frame prototype.
* frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype.
* frv-tdep.c: Remove _initialize_frv_tdep prototype.
* ft32-tdep.c: Remove _initialize_ft32_tdep prototype.
* gcore.c: Remove _initialize_gcore prototype.
* gdb_bfd.c: Remove _initialize_gdb_bfd prototype.
* gdbarch.c: Regenerate.
* gdbarch.sh: Remove _initialize_gdbarch prototype.
* gdbtypes.c: Remove _initialize_gdbtypes prototype.
* gnu-nat.c: Remove _initialize_gnu_nat prototype.
* gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype.
* gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype.
* go-lang.c: Remove _initialize_go_language prototype.
* go32-nat.c: Remove _initialize_go32_nat prototype.
* guile/guile.c: Remove _initialize_guile prototype.
* h8300-tdep.c: Remove _initialize_h8300_tdep prototype.
* hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype.
* hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype.
* hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype.
* hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype.
* hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype.
* hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype.
* hppa-tdep.c: Remove _initialize_hppa_tdep prototype.
* i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype.
* i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep
prototype.
* i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep
prototype.
* i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype.
* i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype.
* i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype.
* i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype.
* i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype.
* i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype.
* i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype.
* i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype.
* i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype.
* i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype.
* i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype.
* i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype.
* i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype.
* i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* i386-tdep.c: Remove _initialize_i386_tdep prototype.
* i386-windows-nat.c: Remove _initialize_i386_windows_nat
prototype.
* ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame
prototype.
* ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype.
* ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype.
* ia64-tdep.c: Remove _initialize_ia64_tdep prototype.
* ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype.
* infcall.c: Remove _initialize_infcall prototype.
* infcmd.c: Remove _initialize_infcmd prototype.
* inferior.c: Remove _initialize_inferiors prototype.
* inflow.c: Remove _initialize_inflow prototype.
* infrun.c: Remove _initialize_infrun prototype.
* interps.c: Remove _initialize_interpreter prototype.
* iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype.
* jit.c: Remove _initialize_jit prototype.
* language.c: Remove _initialize_language prototype.
* linux-fork.c: Remove _initialize_linux_fork prototype.
* linux-nat.c: Remove _initialize_linux_nat prototype.
* linux-tdep.c: Remove _initialize_linux_tdep prototype.
* linux-thread-db.c: Remove _initialize_thread_db prototype.
* lm32-tdep.c: Remove _initialize_lm32_tdep prototype.
* m2-lang.c: Remove _initialize_m2_language prototype.
* m32c-tdep.c: Remove _initialize_m32c_tdep prototype.
* m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype.
* m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype.
* m32r-tdep.c: Remove _initialize_m32r_tdep prototype.
* m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype.
* m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-tdep.c: Remove _initialize_m68k_tdep prototype.
* m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* machoread.c: Remove _initialize_machoread prototype.
* macrocmd.c: Remove _initialize_macrocmd prototype.
* macroscope.c: Remove _initialize_macroscope prototype.
* maint.c: Remove _initialize_maint_cmds prototype.
* mdebugread.c: Remove _initialize_mdebugread prototype.
* memattr.c: Remove _initialize_mem prototype.
* mep-tdep.c: Remove _initialize_mep_tdep prototype.
* mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype.
* mi/mi-cmds.c: Remove _initialize_mi_cmds prototype.
* mi/mi-interp.c: Remove _initialize_mi_interp prototype.
* mi/mi-main.c: Remove _initialize_mi_main prototype.
* microblaze-linux-tdep.c: Remove
_initialize_microblaze_linux_tdep prototype.
* microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype.
* mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype.
* mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype.
* mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype.
* mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype.
* mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype.
* mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype.
* mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype.
* mips-tdep.c: Remove _initialize_mips_tdep prototype.
* mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype.
* mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep
prototype.
* mipsread.c: Remove _initialize_mipsread prototype.
* mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep
prototype.
* mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype.
* moxie-tdep.c: Remove _initialize_moxie_tdep prototype.
* msp430-tdep.c: Remove _initialize_msp430_tdep prototype.
* mt-tdep.c: Remove _initialize_mt_tdep prototype.
* nds32-tdep.c: Remove _initialize_nds32_tdep prototype.
* nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep
prototype.
* nios2-tdep.c: Remove _initialize_nios2_tdep prototype.
* nto-procfs.c: Remove _initialize_procfs prototype.
* nto-tdep.c: Remove _initialize_nto_tdep prototype.
* objc-lang.c: Remove _initialize_objc_language prototype.
* objfiles.c: Remove _initialize_objfiles prototype.
* observer.c: Remove observer_test_first_notification_function,
observer_test_second_notification_function,
observer_test_third_notification_function, and
_initialize_observer prototypes.
* opencl-lang.c: Remove _initialize_opencl_language prototypes.
* osabi.c: Remove _initialize_gdb_osabi prototype.
* osdata.c: Remove _initialize_osdata prototype.
* p-valprint.c: Remove _initialize_pascal_valprint prototype.
* parse.c: Remove _initialize_parse prototype.
* ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype.
* ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype.
* ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype.
* ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype.
* ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype.
* ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype.
* ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype.
* ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype.
* printcmd.c: Remove _initialize_printcmd prototype.
* probe.c: Remove _initialize_probe prototype.
* proc-api.c: Remove _initialize_proc_api prototype.
* proc-events.c: Remove _initialize_proc_events prototype.
* proc-service.c: Remove _initialize_proc_service prototype.
* procfs.c: Remove _initialize_procfs prototype.
* psymtab.c: Remove _initialize_psymtab prototype.
* python/python.c: Remove _initialize_python prototype.
* ravenscar-thread.c: Remove _initialize_ravenscar prototype.
* record-btrace.c: Remove _initialize_record_btrace prototype.
* record-full.c: Remove _initialize_record_full prototype.
* record.c: Remove _initialize_record prototype.
* regcache.c: Remove _initialize_regcache prototype.
* reggroups.c: Remove _initialize_reggroup prototype.
* remote-notif.c: Remove _initialize_notif prototype.
* remote-sim.c: Remove _initialize_remote_sim prototype.
* remote.c: Remove _initialize_remote prototype.
* reverse.c: Remove _initialize_reverse prototype.
* rl78-tdep.c: Remove _initialize_rl78_tdep prototype.
* rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype.
* rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep
prototype.
* rs6000-nat.c: Remove _initialize_rs6000_nat prototype.
* rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype.
* rust-exp.y: Remove _initialize_rust_exp prototype.
* rx-tdep.c: Remove _initialize_rx_tdep prototype.
* s390-linux-nat.c: Remove _initialize_s390_nat prototype.
* s390-linux-tdep.c: Remove _initialize_s390_tdep prototype.
* score-tdep.c: Remove _initialize_score_tdep prototype.
* selftest-arch.c: Remove _initialize_selftests_foreach_arch
prototype.
* ser-go32.c: Remove _initialize_ser_dos prototype.
* ser-mingw.c: Remove _initialize_ser_windows prototype.
* ser-pipe.c: Remove _initialize_ser_pipe prototype.
* ser-tcp.c: Remove _initialize_ser_tcp prototype.
* ser-unix.c: Remove _initialize_ser_hardwire prototype.
* serial.c: Remove _initialize_serial prototype.
* sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype.
* sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype.
* sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype.
* sh-tdep.c: Remove _initialize_sh_tdep prototype.
* skip.c: Remove _initialize_step_skip prototype.
* sol-thread.c: Remove _initialize_sol_thread prototype.
* solib-aix.c: Remove _initialize_solib_aix prototype.
* solib-darwin.c: Remove _initialize_darwin_solib prototype.
* solib-dsbt.c: Remove _initialize_dsbt_solib prototype.
* solib-frv.c: Remove _initialize_frv_solib prototype.
* solib-spu.c: Remove _initialize_spu_solib prototype.
* solib-svr4.c: Remove _initialize_svr4_solib prototype.
* solib-target.c: Remove _initialize_solib_target prototype.
* solib.c: Remove _initialize_solib prototype.
* source.c: Remove _initialize_source prototype.
* sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype.
* sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep
prototype.
* sparc-nat.c: Remove _initialize_sparc_nat prototype.
* sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype.
* sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype.
* sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep
prototype.
* sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype.
* sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype.
* sparc-tdep.c: Remove _initialize_sparc_tdep prototype.
* sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat
prototype.
* sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep
prototype.
* sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat
prototype.
* sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep
prototype.
* sparc64-nat.c: Remove _initialize_sparc64_nat prototype.
* sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat
prototype.
* sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep
prototype.
* sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat
prototype.
* sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep
prototype.
* sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep
prototype.
* spu-linux-nat.c: Remove _initialize_spu_nat prototype.
* spu-multiarch.c: Remove _initialize_spu_multiarch prototype.
* spu-tdep.c: Remove _initialize_spu_tdep prototype.
* stabsread.c: Remove _initialize_stabsread prototype.
* stack.c: Remove _initialize_stack prototype.
* stap-probe.c: Remove _initialize_stap_probe prototype.
* std-regs.c: Remove _initialize_frame_reg prototype.
* symfile-debug.c: Remove _initialize_symfile_debug prototype.
* symfile-mem.c: Remove _initialize_symfile_mem prototype.
* symfile.c: Remove _initialize_symfile prototype.
* symmisc.c: Remove _initialize_symmisc prototype.
* symtab.c: Remove _initialize_symtab prototype.
* target-dcache.c: Remove _initialize_target_dcache prototype.
* target-descriptions.c: Remove _initialize_target_descriptions
prototype.
* thread.c: Remove _initialize_thread prototype.
* tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep
prototype.
* tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype.
* tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype.
* tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep
prototype.
* tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype.
* tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype.
* tracefile.c: Remove _initialize_tracefile prototype.
* tracepoint.c: Remove _initialize_tracepoint prototype.
* tui/tui-hooks.c: Remove _initialize_tui_hooks prototype.
* tui/tui-interp.c: Remove _initialize_tui_interp prototype.
* tui/tui-layout.c: Remove _initialize_tui_layout prototype.
* tui/tui-regs.c: Remove _initialize_tui_regs prototype.
* tui/tui-stack.c: Remove _initialize_tui_stack prototype.
* tui/tui-win.c: Remove _initialize_tui_win prototype.
* tui/tui.c: Remove _initialize_tui prototype.
* typeprint.c: Remove _initialize_typeprint prototype.
* user-regs.c: Remove _initialize_user_regs prototype.
* utils.c: Remove _initialize_utils prototype.
* v850-tdep.c: Remove _initialize_v850_tdep prototype.
* valarith.c: Remove _initialize_valarith prototype.
* valops.c: Remove _initialize_valops prototype.
* valprint.c: Remove _initialize_valprint prototype.
* value.c: Remove _initialize_values prototype.
* varobj.c: Remove _initialize_varobj prototype.
* vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype.
* vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype.
* vax-tdep.c: Remove _initialize_vax_tdep prototype.
* windows-nat.c: Remove _initialize_windows_nat,
_initialize_check_for_gdb_ini, and _initialize_loadable
prototypes.
* windows-tdep.c: Remove _initialize_windows_tdep prototype.
* xcoffread.c: Remove _initialize_xcoffread prototype.
* xml-support.c: Remove _initialize_xml_support prototype.
* xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype.
* xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat
prototype.
* xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep
prototype.
* xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.
|
|
This patch renames a few functions implementing CLI commands to follow
the style <command-name>_command, so that they are easier to search for.
gdb/ChangeLog:
* breakpoint.c (breakpoints_info): Rename to ...
(info_breakpoints_command): ... this.
(watchpoints_info): Rename to ...
(info_watchpoints_command): ... this.
(tracepoints_info): Rename to ...
(info_tracepoints_command): ... this.
(_initialize_breakpoint): Adjust.
* dcache.c (dcache_info): Rename to ...
(info_display_command): ... this.
(_initialize_dcache): Adjust.
* frame.h (args_info): Rename to ...
(info_args_command): ... this.
(locals_info): Rename to ...
(info_locals_command): ... this.
* infcmd.c (nofp_registers_info): Rename to ...
(info_registers_command): ... this.
(float_info): Rename to ...
(info_float_command): ... this.
(program_info): Rename to ...
(info_program_command): ... this.
(all_registers_info): Rename to ...
(info_all_registers_command): ... this.
(vector_info): Rename to ...
(info_vector_command): ... this.
(float_info): Rename to ...
(info_float_command): ... this.
(_initialize_infcmd): Adjust.
* inferior.h (term_info): Rename to ...
(info_terminal_command): ... this.
* inflow.c (term_info): Rename to ...
(info_terminal_command): ... this.
(_initialize_inflow): Adjust.
* infrun.c (signals_info): Rename to ...
(info_signals_command): ... this.
(_initialize_infrun): Adjust.
* objc-lang.c (classes_info): Rename to ...
(info_classes_command): ... this.
(selectors_info): Rename to ...
(info_selectors_command): ... this.
(_initialize_objc_language): Adjust.
* printcmd.c (sym_info): Rename to ...
(info_symbol_command): ... this.
(address_info): Rename to ...
(info_address_command): ... this.
(display_info): Rename to ...
(info_display_command): ... this.
(_initialize_printcmd): Adjust.
* reverse.c (bookmarks_info): Rename to ...
(info_breakpoints_command): ... this.
(_initialize_reverse): Adjust.
* ser-go32.c (dos_info): Rename to ...
(info_serial_command): ... this.
(_initialize_ser_dos): Adjust.
* skip.c (skip_info): Rename to ...
(info_skip_command): ... this.
(_initialize_step_skip): Adjust.
* source.c (line_info): Rename to ...
(info_line_command): ... this.
(source_info): Rename to ...
(info_source_command)
* stack.c (frame_info): Rename to ...
(info_frame_command): ... this.
(locals_info): Rename to ...
(info_locals_command): ... this.
(args_info): Rename to ...
(info_args_command): ... this.
(_initialize_stack): Adjust.
* symtab.c (sources_info): Rename to ...
(info_sources_command): ... this.
(variables_info): Rename to ...
(info_variables_command): ... this.
(functions_info): Rename to ...
(info_functions_command): ... this.
(types_info): Rename to ...
(info_types_command): ... this.
(_initialize_symtab): Adjust.
* target.c (target_info): Rename to ...
(info_target_command): ... this.
(initialize_targets): Adjust.
* tracepoint.c (tvariables_info): Rename to ...
(info_tvariables_command): ... this.
(scope_info): Rename to ...
(info_scope_command): ... this.
(trace_dump_actions): Adjust.
(_initialize_tracepoint): Adjust.
|
|
This commit moves a few bits responsible for dealing with inferior job
control from GDB to common/, which makes them available to gdbserver.
This is necessary for the upcoming patches that will share
fork_inferior et al between GDB and gdbserver.
We move some parts of gdb/terminal.h to gdb/common/common-terminal.h,
especifically the code that checks terminal features and that are used
to set job_control accordingly.
After sharing parts of gdb/terminal.h, we also to share the two
functions on gdb/inflow.c that are going to be needed by the
fork_inferior rework. They are 'gdb_setpgid' and the new
'have_job_control'. I've also taken the opportunity to give a more
meaningful name to "inflow.c" on common/. Now it is called
"job-control.c" (thanks Pedro for the suggestion).
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "common/job-control.c".
(HFILES_NO_SRCDIR): Add "common/job-control.h".
(COMMON_OBS): Add "job-control.o".
* common/job-control.c: New file, with contents from
"gdb/inflow.c".
* common/job-control.h: New file, with contents from "terminal.h".
* fork-child.c: Include "job-control.h".
* inflow.c: Include "job-control.h".
(gdb_setpgid): Move to "common/common-inflow.c".
(_initialize_inflow): Move setting of "job_control" to
"handle_job_control".
* terminal.h (job_control): Moved to "common/common-terminal.h".
(gdb_setpgid): Likewise.
* top.c: Include "job_control.h".
* utils.c: Likewise.
(job_control): Moved to "job-control.c".
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILE): Add "common/job-control.c".
(OBS): Add "job-control.o".
|
|
As requested, I'm sending this as a separate patch because it is ready
to be included as-is.
The idea here is that both gdb/terminal.h and gdb/gdbserver/terminal.h
share the same code, which is responsible for setting a bunch of
defines on based on the presence of termios.h and a few other headers.
This simple patch just moves this common code to common/gdb_termios.h
and makes the necessary adjustments on both GDB and gdbserver so that
they can use this new header. It also implements the some header
checks on common/common.m4.
As a bonus, gdb/gdbserver/terminal.h can be removed because it's now
empty.
Built on x86_64, no regressions found.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/gdb_termios.h".
* common/common.m4: Check headers 'termios.h', 'termio.h' and
'sgtty.h'.
* common/gdb_termios.h: New file, with parts of "terminal.h".
* inflow.c: Include "gdb_termios.h".
* ser-unix.c: Include "gdb_termios.h".
* terminal.h: Move terminal-related defines to
"common/gdb_termios.h".
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* remote-utils.c: Include "gdb_termios.h" instead of
"terminal.h".
* terminal.h: Delete file.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This patch fixes a problem that problem triggers if you start an
inferior, e.g., with the "start" command, in a UI created with the
new-ui command, and then run a foreground execution command in the
main UI. Once the program stops for the latter command, typing in the
main UI no longer echoes back to the user.
The problem revolves around this:
- gdb_has_a_terminal computes its result lazily, on first call.
that is what saves gdb's initial main UI terminal state (the UI
associated with stdin):
our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
This is the state that target_terminal_ours() restores.
- In this scenario, the gdb_has_a_terminal function happens to be
first ever called from within the target_terminal_init call in
startup_inferior:
(top-gdb) bt
#0 gdb_has_a_terminal () at src/gdb/inflow.c:157
#1 0x000000000079db22 in child_terminal_init_with_pgrp () at src/gdb/inflow.c:217
[...]
#4 0x000000000065bacb in target_terminal_init () at src/gdb/target.c:456
#5 0x00000000004676d2 in startup_inferior () at src/gdb/fork-child.c:531
[...]
#7 0x000000000046b168 in linux_nat_create_inferior () at src/gdb/linux-nat.c:1112
[...]
#9 0x00000000005f20c9 in start_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:657
If the command to start the inferior is issued on the main UI, then
readline will have deprepped the terminal when we reach the above, and
the problem doesn't appear.
If however the command is issued on a non-main UI, then when we reach
that gdb_has_a_terminal call, the main UI's terminal state is still
set to whatever readline has sets it to in rl_prep_terminal, which
happens to have echo disabled. Later, when the following synchronous
execution command finishes, we'll call target_terminal_ours to restore
gdb's the main UI's terminal settings, and that restores the terminal
state with echo disabled...
Conceptually, the fix is to move the gdb_has_a_terminal call earlier,
to someplace during GDB initialization, before readline/ncurses have
had a chance to change terminal settings. Turns out that
"set_initial_gdb_ttystate" is exactly such a place.
I say conceptually, because the fix actually inlines the
gdb_has_a_terminal part that saves the terminal state in
set_initial_gdb_ttystate and then simplifies gdb_has_a_terminal, since
there's no point in making gdb_has_a_terminal do lazy computation.
gdb/ChangeLog:
2016-08-23 Pedro Alves <palves@redhat.com>
PR gdb/20494
* inflow.c (our_terminal_info, initial_gdb_ttystate): Update
comments.
(enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
Delete.
(set_initial_gdb_ttystate): Record our_terminal_info here too,
instead of ...
(gdb_has_a_terminal): ... here. Reimplement in terms of
initial_gdb_ttystate. Make static.
* terminal.h (gdb_has_a_terminal): Delete declaration.
(set_initial_gdb_ttystate): Add comment.
* top.c (show_interactive_mode): Use input_interactive_p instead
of gdb_has_a_terminal.
gdb/testsuite/ChangeLog:
2016-08-23 Pedro Alves <palves@redhat.com>
PR gdb/20494
* gdb.base/new-ui-echo.c: New file.
* gdb.base/new-ui-echo.exp: New file.
|
|
One spot needed ATTRIBUTE_UNUSED to cope with the new warnings.
The case in inflow.c is just a mass of ifdefs; and while the only use
of "result" is guarded by "#if 0", I thought it simplest to leave it
all in place.
2016-07-14 Tom Tromey <tom@tromey.com>
* inflow.c (child_terminal_ours_1): Use ATTRIBUTE_UNUSED.
|
|
This commit makes each UI have its own "stdin" stream pointer. This
is used to determine whether the "from_tty" argument to
execute_command, etc. should be true.
Related, this commit makes input_from_terminal_p take an UI parameter,
and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only
returns info on gdb's own main/primary terminal (the real stdin).
However, the places that call input_from_terminal_p really want to
know is whether the command came from an interactive tty. This patch
thus renames input_from_terminal_p to input_interactive_p for clarity,
and then makes input_interactive_p check for "set interactive" itself,
along with ISATTY, instead of calling gdb_has_a_terminal. Actually,
quit_force wants to call input_interactive_p _after_ stdin is closed,
we can't call ISATTY that late. So instead we save the result of
ISATTY in a field of the UI.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
(read_command_lines): Use input_interactive_p instead of
input_from_terminal_p.
* defs.h (struct ui): Forward declare.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this.
* event-top.c (stdin_event_handler): Pass 0 as from_tty argument
to quit_command.
(command_handler): Adjust to per-UI stdin.
(handle_line_of_input): Adjust to per-UI stdin and use
input_interactive_p instead of ISATTY and input_from_terminal_p.
(gdb_readline_no_editing_callback): Adjust to per-UI stdin.
(command_line_handler): Always pass true as "from_tty" parameter
of handle_line_of_input and execute_command.
(async_sigterm_handler): Pass 0 as from_tty argument to
quit_command.
* inflow.c (interactive_mode, show_interactive_mode): Moved to ...
(gdb_has_a_terminal): Don't check interactive_mode here.
(_initialize_inflow): Don't install "set interactive-mode" here.
* main.c (captured_command_loop): Adjust to per-UI stdin.
* mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
stdin.
* top.c (new_ui): Save the stdin stream and whether it's a tty.
(dont_repeat): Adjust to per-UI stdin.
(command_line_input): Adjust to per-UI stdin and to use
input_interactive_p.
(quit_force): Write history if any UI supports interactive input.
(interactive_mode, show_interactive_mode): Move here, from
inflow.c.
(input_from_terminal_p): Rename to ...
(input_interactive_p): ... this, and check the "interactive_mode"
global instead of calling gdb_has_a_terminal.
(_initialize_top): Install "set interactive-mode" here.
* top.h (struct ui) <stdin_stream, input_interactive_p>: New
fields.
* utils.c (quit): Pass 0 as from_tty argument to quit_force.
(defaulted_query): Adjust to per-UI stdin and to use
input_interactive_p.
|
|
GCC6 will warn about misleading indentation issues like:
gdb/ada-lang.c: In function ‘ada_evaluate_subexp’:
ada-lang.c:11423:9: error: statement is indented as if it were guarded by...
arg1 = unwrap_value (arg1);
^~~~
gdb/ada-lang.c:11421:7: note: ...this ‘else’ clause, but it is not
else
^~~~
In this case it would be a bug except for the fact the if clause already
returned early. So this misindented statement really only got executed
for the else case. But it could easily mislead a reader, so adding a
proper else block is the correct solution.
In case of c-typeprint.c (c_type_print_base) the if statement is indeed
misleadingly indented, but not a bug. Just indent correctly. The inflow.c
(terminal_ours_1) misindented block comes from the removal of an if clause
in commit d9d2d8b which looks correct. Just introduce an else to fixup the
indentation of the block. The linux-record.c misleadingly indented return
statements are just that. Misleading to the reader, but not actual bugs.
Just unindent them so they don't look like they fall under the wrong if
clause.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
Note: I needed to split this patch in two, otherwise it's too big for
the mailing list.
This patch adds explicit casts to situations where a void pointer is
assigned to a pointer to the "real" type. Building in C++ mode requires
those assignments to use an explicit cast. This includes, for example:
- callback arguments (cleanups, comparison functions, ...)
- data attached to some object (objfile, program space, etc) in the form
of a void pointer
- "user data" passed to some function
This patch comes from the commit "(mostly) auto-generated patch to insert
casts needed for C++", taken from Pedro's C++ branch.
Only files built on x86 with --enable-targets=all are modified, so the
native files for other arches will need to be dealt with separately.
I built-tested this with --enable-targets=all and reg-tested. To my
surprise, a test case (selftest.exp) had to be adjusted.
Here's the ChangeLog entry. Again, this was relatively quick to make
despite the length, thanks to David Malcom's script, although I don't
believe it's very useful information in that particular case...
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_make_prologue_cache): Add cast(s).
(aarch64_make_stub_cache): Likewise.
(value_of_aarch64_user_reg): Likewise.
* ada-lang.c (ada_inferior_data_cleanup): Likewise.
(get_ada_inferior_data): Likewise.
(get_ada_pspace_data): Likewise.
(ada_pspace_data_cleanup): Likewise.
(ada_complete_symbol_matcher): Likewise.
(ada_exc_search_name_matches): Likewise.
* ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
(get_ada_tasks_inferior_data): Likewise.
* addrmap.c (addrmap_mutable_foreach_worker): Likewise.
(splay_obstack_alloc): Likewise.
(splay_obstack_free): Likewise.
* alpha-linux-tdep.c (alpha_linux_supply_gregset): Likewise.
(alpha_linux_collect_gregset): Likewise.
(alpha_linux_supply_fpregset): Likewise.
(alpha_linux_collect_fpregset): Likewise.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Likewise.
* alpha-tdep.c (alpha_lds): Likewise.
(alpha_sts): Likewise.
(alpha_sigtramp_frame_unwind_cache): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_supply_int_regs): Likewise.
(alpha_fill_int_regs): Likewise.
(alpha_supply_fp_regs): Likewise.
(alpha_fill_fp_regs): Likewise.
* alphanbsd-tdep.c (alphanbsd_supply_fpregset): Likewise.
(alphanbsd_aout_supply_gregset): Likewise.
(alphanbsd_supply_gregset): Likewise.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
(amd64_x32_linux_init_abi): Likewise.
* amd64-nat.c (amd64_supply_native_gregset): Likewise.
(amd64_collect_native_gregset): Likewise.
* amd64-tdep.c (amd64_frame_cache): Likewise.
(amd64_sigtramp_frame_cache): Likewise.
(amd64_epilogue_frame_cache): Likewise.
(amd64_supply_fxsave): Likewise.
(amd64_supply_xsave): Likewise.
(amd64_collect_fxsave): Likewise.
(amd64_collect_xsave): Likewise.
* amd64-windows-tdep.c (amd64_windows_frame_cache): Likewise.
* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Likewise.
* arm-linux-tdep.c (arm_linux_supply_gregset): Likewise.
(arm_linux_collect_gregset): Likewise.
(arm_linux_supply_nwfpe): Likewise.
(arm_linux_collect_nwfpe): Likewise.
(arm_linux_supply_vfp): Likewise.
(arm_linux_collect_vfp): Likewise.
* arm-tdep.c (arm_find_mapping_symbol): Likewise.
(arm_prologue_unwind_stop_reason): Likewise.
(arm_prologue_this_id): Likewise.
(arm_prologue_prev_register): Likewise.
(arm_exidx_data_free): Likewise.
(arm_find_exidx_entry): Likewise.
(arm_stub_this_id): Likewise.
(arm_m_exception_this_id): Likewise.
(arm_m_exception_prev_register): Likewise.
(arm_normal_frame_base): Likewise.
(gdb_print_insn_arm): Likewise.
(arm_objfile_data_free): Likewise.
(arm_record_special_symbol): Likewise.
(value_of_arm_user_reg): Likewise.
* armbsd-tdep.c (armbsd_supply_fpregset): Likewise.
(armbsd_supply_gregset): Likewise.
* auto-load.c (auto_load_pspace_data_cleanup): Likewise.
(get_auto_load_pspace_data): Likewise.
(hash_loaded_script_entry): Likewise.
(eq_loaded_script_entry): Likewise.
(clear_section_scripts): Likewise.
(collect_matching_scripts): Likewise.
* auxv.c (auxv_inferior_data_cleanup): Likewise.
(get_auxv_inferior_data): Likewise.
* avr-tdep.c (avr_frame_unwind_cache): Likewise.
* ax-general.c (do_free_agent_expr_cleanup): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
(target_bfd_xclose): Likewise.
(target_bfd_get_section_table): Likewise.
* bfin-tdep.c (bfin_frame_cache): Likewise.
* block.c (find_block_in_blockvector): Likewise.
(call_site_for_pc): Likewise.
(block_find_non_opaque_type_preferred): Likewise.
* break-catch-sig.c (signal_catchpoint_insert_location): Likewise.
(signal_catchpoint_remove_location): Likewise.
(signal_catchpoint_breakpoint_hit): Likewise.
(signal_catchpoint_print_one): Likewise.
(signal_catchpoint_print_mention): Likewise.
(signal_catchpoint_print_recreate): Likewise.
* break-catch-syscall.c (get_catch_syscall_inferior_data): Likewise.
* breakpoint.c (do_cleanup_counted_command_line): Likewise.
(bp_location_compare_addrs): Likewise.
(get_first_locp_gte_addr): Likewise.
(check_tracepoint_command): Likewise.
(do_map_commands_command): Likewise.
(get_breakpoint_objfile_data): Likewise.
(free_breakpoint_probes): Likewise.
(do_captured_breakpoint_query): Likewise.
(compare_breakpoints): Likewise.
(bp_location_compare): Likewise.
(bpstat_remove_breakpoint_callback): Likewise.
(do_delete_breakpoint_cleanup): Likewise.
* bsd-uthread.c (bsd_uthread_set_supply_uthread): Likewise.
(bsd_uthread_set_collect_uthread): Likewise.
(bsd_uthread_activate): Likewise.
(bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* btrace.c (check_xml_btrace_version): Likewise.
(parse_xml_btrace_block): Likewise.
(parse_xml_btrace_pt_config_cpu): Likewise.
(parse_xml_btrace_pt_raw): Likewise.
(parse_xml_btrace_pt): Likewise.
(parse_xml_btrace_conf_bts): Likewise.
(parse_xml_btrace_conf_pt): Likewise.
(do_btrace_data_cleanup): Likewise.
* c-typeprint.c (find_typedef_for_canonicalize): Likewise.
* charset.c (cleanup_iconv): Likewise.
(do_cleanup_iterator): Likewise.
* cli-out.c (cli_uiout_dtor): Likewise.
(cli_table_begin): Likewise.
(cli_table_body): Likewise.
(cli_table_end): Likewise.
(cli_table_header): Likewise.
(cli_begin): Likewise.
(cli_end): Likewise.
(cli_field_int): Likewise.
(cli_field_skip): Likewise.
(cli_field_string): Likewise.
(cli_field_fmt): Likewise.
(cli_spaces): Likewise.
(cli_text): Likewise.
(cli_message): Likewise.
(cli_wrap_hint): Likewise.
(cli_flush): Likewise.
(cli_redirect): Likewise.
(out_field_fmt): Likewise.
(field_separator): Likewise.
(cli_out_set_stream): Likewise.
* cli/cli-cmds.c (compare_symtabs): Likewise.
* cli/cli-dump.c (call_dump_func): Likewise.
(restore_section_callback): Likewise.
* cli/cli-script.c (clear_hook_in_cleanup): Likewise.
(do_restore_user_call_depth): Likewise.
(do_free_command_lines_cleanup): Likewise.
* coff-pe-read.c (get_section_vmas): Likewise.
(pe_as16): Likewise.
(pe_as32): Likewise.
* coffread.c (coff_symfile_read): Likewise.
* common/agent.c (agent_look_up_symbols): Likewise.
* common/filestuff.c (do_close_cleanup): Likewise.
* common/format.c (free_format_pieces_cleanup): Likewise.
* common/vec.c (vec_o_reserve): Likewise.
* compile/compile-c-support.c (print_one_macro): Likewise.
* compile/compile-c-symbols.c (hash_symbol_error): Likewise.
(eq_symbol_error): Likewise.
(del_symbol_error): Likewise.
(error_symbol_once): Likewise.
(gcc_convert_symbol): Likewise.
(gcc_symbol_address): Likewise.
(hash_symname): Likewise.
(eq_symname): Likewise.
* compile/compile-c-types.c (hash_type_map_instance): Likewise.
(eq_type_map_instance): Likewise.
(insert_type): Likewise.
(convert_type): Likewise.
* compile/compile-object-load.c (munmap_listp_free_cleanup): Likewise.
(setup_sections): Likewise.
(link_hash_table_free): Likewise.
(copy_sections): Likewise.
* compile/compile-object-run.c (do_module_cleanup): Likewise.
* compile/compile.c (compile_print_value): Likewise.
(do_rmdir): Likewise.
(cleanup_compile_instance): Likewise.
(cleanup_unlink_file): Likewise.
* completer.c (free_completion_tracker): Likewise.
* corelow.c (add_to_spuid_list): Likewise.
* cp-namespace.c (reset_directive_searched): Likewise.
* cp-support.c (reset_directive_searched): Likewise.
* cris-tdep.c (cris_sigtramp_frame_unwind_cache): Likewise.
(cris_frame_unwind_cache): Likewise.
* d-lang.c (builtin_d_type): Likewise.
* d-namespace.c (reset_directive_searched): Likewise.
* dbxread.c (dbx_free_symfile_info): Likewise.
(do_free_bincl_list_cleanup): Likewise.
* disasm.c (hash_dis_line_entry): Likewise.
(eq_dis_line_entry): Likewise.
(dis_asm_print_address): Likewise.
(fprintf_disasm): Likewise.
(do_ui_file_delete): Likewise.
* doublest.c (convert_floatformat_to_doublest): Likewise.
* dummy-frame.c (pop_dummy_frame_bpt): Likewise.
(dummy_frame_prev_register): Likewise.
(dummy_frame_this_id): Likewise.
* dwarf2-frame-tailcall.c (cache_hash): Likewise.
(cache_eq): Likewise.
(cache_find): Likewise.
(tailcall_frame_this_id): Likewise.
(dwarf2_tailcall_prev_register_first): Likewise.
(tailcall_frame_prev_register): Likewise.
(tailcall_frame_dealloc_cache): Likewise.
(tailcall_frame_prev_arch): Likewise.
* dwarf2-frame.c (dwarf2_frame_state_free): Likewise.
(dwarf2_frame_set_init_reg): Likewise.
(dwarf2_frame_init_reg): Likewise.
(dwarf2_frame_set_signal_frame_p): Likewise.
(dwarf2_frame_signal_frame_p): Likewise.
(dwarf2_frame_set_adjust_regnum): Likewise.
(dwarf2_frame_adjust_regnum): Likewise.
(clear_pointer_cleanup): Likewise.
(dwarf2_frame_cache): Likewise.
(find_cie): Likewise.
(dwarf2_frame_find_fde): Likewise.
* dwarf2expr.c (dwarf_expr_address_type): Likewise.
(free_dwarf_expr_context_cleanup): Likewise.
* dwarf2loc.c (locexpr_find_frame_base_location): Likewise.
(locexpr_get_frame_base): Likewise.
(loclist_find_frame_base_location): Likewise.
(loclist_get_frame_base): Likewise.
(dwarf_expr_dwarf_call): Likewise.
(dwarf_expr_get_base_type): Likewise.
(dwarf_expr_push_dwarf_reg_entry_value): Likewise.
(dwarf_expr_get_obj_addr): Likewise.
(entry_data_value_coerce_ref): Likewise.
(entry_data_value_copy_closure): Likewise.
(entry_data_value_free_closure): Likewise.
(get_frame_address_in_block_wrapper): Likewise.
(dwarf2_evaluate_property): Likewise.
(dwarf2_compile_property_to_c): Likewise.
(needs_frame_read_addr_from_reg): Likewise.
(needs_frame_get_reg_value): Likewise.
(needs_frame_frame_base): Likewise.
(needs_frame_frame_cfa): Likewise.
(needs_frame_tls_address): Likewise.
(needs_frame_dwarf_call): Likewise.
(needs_dwarf_reg_entry_value): Likewise.
(get_ax_pc): Likewise.
(locexpr_read_variable): Likewise.
(locexpr_read_variable_at_entry): Likewise.
(locexpr_read_needs_frame): Likewise.
(locexpr_describe_location): Likewise.
(locexpr_tracepoint_var_ref): Likewise.
(locexpr_generate_c_location): Likewise.
(loclist_read_variable): Likewise.
(loclist_read_variable_at_entry): Likewise.
(loclist_describe_location): Likewise.
(loclist_tracepoint_var_ref): Likewise.
(loclist_generate_c_location): Likewise.
* dwarf2read.c (line_header_hash_voidp): Likewise.
(line_header_eq_voidp): Likewise.
(dwarf2_has_info): Likewise.
(dwarf2_get_section_info): Likewise.
(locate_dwz_sections): Likewise.
(hash_file_name_entry): Likewise.
(eq_file_name_entry): Likewise.
(delete_file_name_entry): Likewise.
(dw2_setup): Likewise.
(dw2_get_file_names_reader): Likewise.
(dw2_find_pc_sect_compunit_symtab): Likewise.
(hash_signatured_type): Likewise.
(eq_signatured_type): Likewise.
(add_signatured_type_cu_to_table): Likewise.
(create_debug_types_hash_table): Likewise.
(lookup_dwo_signatured_type): Likewise.
(lookup_dwp_signatured_type): Likewise.
(lookup_signatured_type): Likewise.
(hash_type_unit_group): Likewise.
(eq_type_unit_group): Likewise.
(get_type_unit_group): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(sort_tu_by_abbrev_offset): Likewise.
(process_skeletonless_type_unit): Likewise.
(psymtabs_addrmap_cleanup): Likewise.
(dwarf2_read_symtab): Likewise.
(psymtab_to_symtab_1): Likewise.
(die_hash): Likewise.
(die_eq): Likewise.
(load_full_comp_unit_reader): Likewise.
(reset_die_in_process): Likewise.
(free_cu_line_header): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(hash_dwo_file): Likewise.
(eq_dwo_file): Likewise.
(hash_dwo_unit): Likewise.
(eq_dwo_unit): Likewise.
(create_dwo_cu_reader): Likewise.
(create_dwo_unit_in_dwp_v1): Likewise.
(create_dwo_unit_in_dwp_v2): Likewise.
(lookup_dwo_unit_in_dwp): Likewise.
(dwarf2_locate_dwo_sections): Likewise.
(dwarf2_locate_common_dwp_sections): Likewise.
(dwarf2_locate_v2_dwp_sections): Likewise.
(hash_dwp_loaded_cutus): Likewise.
(eq_dwp_loaded_cutus): Likewise.
(lookup_dwo_cutu): Likewise.
(abbrev_table_free_cleanup): Likewise.
(dwarf2_free_abbrev_table): Likewise.
(find_partial_die_in_comp_unit): Likewise.
(free_line_header_voidp): Likewise.
(follow_die_offset): Likewise.
(follow_die_sig_1): Likewise.
(free_heap_comp_unit): Likewise.
(free_stack_comp_unit): Likewise.
(dwarf2_free_objfile): Likewise.
(per_cu_offset_and_type_hash): Likewise.
(per_cu_offset_and_type_eq): Likewise.
(get_die_type_at_offset): Likewise.
(partial_die_hash): Likewise.
(partial_die_eq): Likewise.
(dwarf2_per_objfile_free): Likewise.
(hash_strtab_entry): Likewise.
(eq_strtab_entry): Likewise.
(add_string): Likewise.
(hash_symtab_entry): Likewise.
(eq_symtab_entry): Likewise.
(delete_symtab_entry): Likewise.
(cleanup_mapped_symtab): Likewise.
(add_indices_to_cpool): Likewise.
(hash_psymtab_cu_index): Likewise.
(eq_psymtab_cu_index): Likewise.
(add_address_entry_worker): Likewise.
(unlink_if_set): Likewise.
(write_one_signatured_type): Likewise.
(save_gdb_index_command): Likewise.
* elfread.c (elf_symtab_read): Likewise.
(elf_gnu_ifunc_cache_hash): Likewise.
(elf_gnu_ifunc_cache_eq): Likewise.
(elf_gnu_ifunc_record_cache): Likewise.
(elf_gnu_ifunc_resolve_by_cache): Likewise.
(elf_get_probes): Likewise.
(probe_key_free): Likewise.
* f-lang.c (builtin_f_type): Likewise.
* frame-base.c (frame_base_append_sniffer): Likewise.
(frame_base_set_default): Likewise.
(frame_base_find_by_frame): Likewise.
* frame-unwind.c (frame_unwind_prepend_unwinder): Likewise.
(frame_unwind_append_unwinder): Likewise.
(frame_unwind_find_by_frame): Likewise.
* frame.c (frame_addr_hash): Likewise.
(frame_addr_hash_eq): Likewise.
(frame_stash_find): Likewise.
(do_frame_register_read): Likewise.
(unwind_to_current_frame): Likewise.
(frame_cleanup_after_sniffer): Likewise.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
* frv-tdep.c (frv_frame_unwind_cache): Likewise.
* ft32-tdep.c (ft32_frame_cache): Likewise.
* gcore.c (do_bfd_delete_cleanup): Likewise.
(gcore_create_callback): Likewise.
* gdb_bfd.c (hash_bfd): Likewise.
(eq_bfd): Likewise.
(gdb_bfd_open): Likewise.
(free_one_bfd_section): Likewise.
(gdb_bfd_ref): Likewise.
(gdb_bfd_unref): Likewise.
(get_section_descriptor): Likewise.
(gdb_bfd_map_section): Likewise.
(gdb_bfd_crc): Likewise.
(gdb_bfd_mark_parent): Likewise.
(gdb_bfd_record_inclusion): Likewise.
(gdb_bfd_requires_relocations): Likewise.
(print_one_bfd): Likewise.
* gdbtypes.c (type_pair_hash): Likewise.
(type_pair_eq): Likewise.
(builtin_type): Likewise.
(objfile_type): Likewise.
* gnu-v3-abi.c (vtable_ptrdiff_type): Likewise.
(vtable_address_point_offset): Likewise.
(gnuv3_get_vtable): Likewise.
(hash_value_and_voffset): Likewise.
(eq_value_and_voffset): Likewise.
(compare_value_and_voffset): Likewise.
(compute_vtable_size): Likewise.
(gnuv3_get_typeid_type): Likewise.
* go-lang.c (builtin_go_type): Likewise.
* guile/scm-block.c (bkscm_hash_block_smob): Likewise.
(bkscm_eq_block_smob): Likewise.
(bkscm_objfile_block_map): Likewise.
(bkscm_del_objfile_blocks): Likewise.
* guile/scm-breakpoint.c (bpscm_build_bp_list): Likewise.
* guile/scm-disasm.c (gdbscm_disasm_read_memory_worker): Likewise.
(gdbscm_disasm_print_address): Likewise.
* guile/scm-frame.c (frscm_hash_frame_smob): Likewise.
(frscm_eq_frame_smob): Likewise.
(frscm_inferior_frame_map): Likewise.
(frscm_del_inferior_frames): Likewise.
* guile/scm-gsmob.c (gdbscm_add_objfile_ref): Likewise.
* guile/scm-objfile.c (ofscm_handle_objfile_deleted): Likewise.
(ofscm_objfile_smob_from_objfile): Likewise.
* guile/scm-ports.c (ioscm_write): Likewise.
(ioscm_file_port_delete): Likewise.
(ioscm_file_port_rewind): Likewise.
(ioscm_file_port_put): Likewise.
(ioscm_file_port_write): Likewise.
* guile/scm-progspace.c (psscm_handle_pspace_deleted): Likewise.
(psscm_pspace_smob_from_pspace): Likewise.
* guile/scm-safe-call.c (scscm_recording_pre_unwind_handler): Likewise.
(scscm_recording_unwind_handler): Likewise.
(gdbscm_with_catch): Likewise.
(scscm_call_0_body): Likewise.
(scscm_call_1_body): Likewise.
(scscm_call_2_body): Likewise.
(scscm_call_3_body): Likewise.
(scscm_call_4_body): Likewise.
(scscm_apply_1_body): Likewise.
(scscm_eval_scheme_string): Likewise.
(gdbscm_safe_eval_string): Likewise.
(scscm_source_scheme_script): Likewise.
(gdbscm_safe_source_script): Likewise.
* guile/scm-string.c (gdbscm_call_scm_to_stringn): Likewise.
(gdbscm_call_scm_from_stringn): Likewise.
* guile/scm-symbol.c (syscm_hash_symbol_smob): Likewise.
(syscm_eq_symbol_smob): Likewise.
(syscm_get_symbol_map): Likewise.
(syscm_del_objfile_symbols): Likewise.
* guile/scm-symtab.c (stscm_hash_symtab_smob): Likewise.
(stscm_eq_symtab_smob): Likewise.
(stscm_objfile_symtab_map): Likewise.
(stscm_del_objfile_symtabs): Likewise.
* guile/scm-type.c (tyscm_hash_type_smob): Likewise.
(tyscm_eq_type_smob): Likewise.
(tyscm_type_map): Likewise.
(tyscm_copy_type_recursive): Likewise.
(save_objfile_types): Likewise.
* guile/scm-utils.c (extract_arg): Likewise.
* h8300-tdep.c (h8300_frame_cache): Likewise.
* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind_cache): Likewise.
* hppa-tdep.c (compare_unwind_entries): Likewise.
(find_unwind_entry): Likewise.
(hppa_frame_cache): Likewise.
(hppa_stub_frame_unwind_cache): Likewise.
* hppanbsd-tdep.c (hppanbsd_supply_gregset): Likewise.
* hppaobsd-tdep.c (hppaobsd_supply_gregset): Likewise.
(hppaobsd_supply_fpregset): Likewise.
* i386-cygwin-tdep.c (core_process_module_section): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_frame_cache): Likewise.
(i386_epilogue_frame_cache): Likewise.
(i386_sigtramp_frame_cache): Likewise.
(i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_gdbarch_init): Likewise.
* i386obsd-tdep.c (i386obsd_aout_supply_regset): Likewise.
(i386obsd_trapframe_cache): Likewise.
* i387-tdep.c (i387_supply_fsave): Likewise.
(i387_collect_fsave): Likewise.
(i387_supply_fxsave): Likewise.
(i387_collect_fxsave): Likewise.
(i387_supply_xsave): Likewise.
(i387_collect_xsave): Likewise.
* ia64-tdep.c (ia64_frame_cache): Likewise.
(ia64_sigtramp_frame_cache): Likewise.
* infcmd.c (attach_command_continuation): Likewise.
(attach_command_continuation_free_args): Likewise.
* inferior.c (restore_inferior): Likewise.
(delete_thread_of_inferior): Likewise.
* inflow.c (inflow_inferior_data_cleanup): Likewise.
(get_inflow_inferior_data): Likewise.
(inflow_inferior_exit): Likewise.
* infrun.c (displaced_step_clear_cleanup): Likewise.
(restore_current_uiout_cleanup): Likewise.
(release_stop_context_cleanup): Likewise.
(do_restore_infcall_suspend_state_cleanup): Likewise.
(do_restore_infcall_control_state_cleanup): Likewise.
(restore_inferior_ptid): Likewise.
* inline-frame.c (block_starting_point_at): Likewise.
* iq2000-tdep.c (iq2000_frame_cache): Likewise.
* jit.c (get_jit_objfile_data): Likewise.
(get_jit_program_space_data): Likewise.
(jit_object_close_impl): Likewise.
(jit_find_objf_with_entry_addr): Likewise.
(jit_breakpoint_deleted): Likewise.
(jit_unwind_reg_set_impl): Likewise.
(jit_unwind_reg_get_impl): Likewise.
(jit_dealloc_cache): Likewise.
(jit_frame_sniffer): Likewise.
(jit_frame_prev_register): Likewise.
(jit_prepend_unwinder): Likewise.
(jit_inferior_exit_hook): Likewise.
(free_objfile_data): Likewise.
* jv-lang.c (jv_per_objfile_free): Likewise.
(get_dynamics_objfile): Likewise.
(get_java_class_symtab): Likewise.
(builtin_java_type): Likewise.
* language.c (language_string_char_type): Likewise.
(language_bool_type): Likewise.
(language_lookup_primitive_type): Likewise.
(language_lookup_primitive_type_as_symbol): Likewise.
* linespec.c (hash_address_entry): Likewise.
(eq_address_entry): Likewise.
(iterate_inline_only): Likewise.
(iterate_name_matcher): Likewise.
(decode_line_2_compare_items): Likewise.
(collect_one_symbol): Likewise.
(compare_symbols): Likewise.
(compare_msymbols): Likewise.
(add_symtabs_to_list): Likewise.
(collect_symbols): Likewise.
(compare_msyms): Likewise.
(add_minsym): Likewise.
(cleanup_linespec_result): Likewise.
* linux-fork.c (inferior_call_waitpid_cleanup): Likewise.
* linux-nat.c (delete_lwp_cleanup): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(resume_stopped_resumed_lwps): Likewise.
* linux-tdep.c (get_linux_gdbarch_data): Likewise.
(invalidate_linux_cache_inf): Likewise.
(get_linux_inferior_data): Likewise.
(linux_find_memory_regions_thunk): Likewise.
(linux_make_mappings_callback): Likewise.
(linux_corefile_thread_callback): Likewise.
(find_mapping_size): Likewise.
* linux-thread-db.c (find_new_threads_callback): Likewise.
* lm32-tdep.c (lm32_frame_cache): Likewise.
* m2-lang.c (builtin_m2_type): Likewise.
* m32c-tdep.c (m32c_analyze_frame_prologue): Likewise.
* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_cache): Likewise.
(m32r_linux_supply_gregset): Likewise.
(m32r_linux_collect_gregset): Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
* m68k-tdep.c (m68k_frame_cache): Likewise.
* m68kbsd-tdep.c (m68kbsd_supply_fpregset): Likewise.
(m68kbsd_supply_gregset): Likewise.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* m88k-tdep.c (m88k_frame_cache): Likewise.
(m88k_supply_gregset): Likewise.
gdb/gdbserver/ChangeLog:
* dll.c (match_dll): Add cast(s).
(unloaded_dll): Likewise.
* linux-low.c (second_thread_of_pid_p): Likewise.
(delete_lwp_callback): Likewise.
(count_events_callback): Likewise.
(select_event_lwp_callback): Likewise.
(linux_set_resume_request): Likewise.
* server.c (accumulate_file_name_length): Likewise.
(emit_dll_description): Likewise.
(handle_qxfer_threads_worker): Likewise.
(visit_actioned_threads): Likewise.
* thread-db.c (any_thread_of): Likewise.
* tracepoint.c (same_process_p): Likewise.
(match_blocktype): Likewise.
(build_traceframe_info_xml): Likewise.
gdb/testsuite/ChangeLog:
* gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected
source line.
|
|
This fixes 14 build errors like these in C++ mode:
src/gdb/extension.c: In function ‘void install_sigint_handler(const signal_handler*)’:
src/gdb/extension.c:698:41: error: invalid conversion from ‘void (*)()’ to ‘__sighandler_t {aka void (*)(int)}’ [-fpermissive]
signal (SIGINT, handler_state->handler);
^
In file included from build-gnulib/import/signal.h:52:0,
from ../../src/gdb/extension.c:24:
/usr/include/signal.h:102:23: error: initializing argument 2 of ‘void (* signal(int, __sighandler_t))(int)’ [-fpermissive]
extern __sighandler_t signal (int __sig, __sighandler_t __handler)
^
Instead of this everywhere:
- RETSIGTYPE (*handle_sigint_for_compare) () = handle_sigint;
+ RETSIGTYPE (*handle_sigint_for_compare) (int) = handle_sigint;
Use sighandler_t (a GNU extension). That's OK to use unconditionaly
because gnulib's signal.h replacement makes sure that it is available.
gdb/ChangeLog:
2015-08-27 Pedro Alves <palves@redhat.com>
* cp-support.c (gdb_demangle): Use sighandler_t. Remove cast.
* extension-priv.h: Include signal.h.
(struct signal_handler) <handler>: Change type to sighandler_t.
* extension.c (install_gdb_sigint_handler): Use sighandler_t.
* inflow.c (sigint_ours, sigquit_ours): Change type to
sighandler_t.
(child_terminal_inferior): Remove casts.
(child_terminal_ours_1, new_tty): Use sighandler_t. Remove casts.
(osig): Change type to sighandler_t.
* nto-procfs.c (ofunc): Change type to sighandler_t.
(procfs_wait): Remove casts.
* remote-m32r-sdi.c (m32r_wait, m32r_load): Use sighandler_t.
* remote-sim.c (gdbsim_wait): Use sighandler_t.
* utils.c (wait_to_die_with_timeout): Use sighandler_t.
|
|
This is a patch I extracted from Pedro's C++ branch. It contains the
most trivial enum fixes, where an integer type/value was used instead
of the appropriate enum type/value. It fixes many C++ errors, since
in C++ you can't mix integers and enums implicitely.
Regardless of the C++ conversion, I think this is a good cleanup to make
use of the appropriate enum types.
Regression-tested on native x86_64.
gdb/ChangeLog:
* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
type or value instead of integer.
(aarch64_linux_insert_watchpoint): Likewise.
(aarch64_linux_remove_watchpoint): Likewise.
* ada-lang.c (ada_op_print_tab): Likewise.
* amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
(amd64_linux_syscall_record_common): Likewise.
* arch-utils.c (target_byte_order_user): Likewise.
(default_byte_order): Likewise.
* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
(arm_linux_get_hwbp_type): Likewise.
(arm_linux_hw_watchpoint_initialize): Likewise.
(arm_linux_insert_watchpoint): Likewise.
* arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
(arm_linux_syscall_record): Likewise.
* breakpoint.c (update_watchpoint): Likewise.
(breakpoint_here_p): Likewise.
(bpstat_print): Likewise.
(enable_breakpoint_disp): Likewise.
* c-lang.c (c_op_print_tab): Likewise.
* cli/cli-decode.c (add_info_alias): Likewise.
* d-lang.c (d_op_print_tab): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* f-exp.y (dot_ops): Likewise.
(f77_keywords): Likewise.
* f-lang.c (f_op_print_tab): Likewise.
* go-lang.c (go_op_print_tab): Likewise.
* guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
* guile/scm-cmd.c (gdbscm_make_command): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
* guile/scm-string.c (struct scm_to_stringn_data): Likewise.
(struct scm_from_stringn_data): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_remove_watchpoint): Likewise.
(ia64_linux_can_use_hw_breakpoint): Likewise.
* infrun.c (print_stop_event): Likewise.
* jv-lang.c (java_op_print_tab): Likewise.
* linux-nat.c (linux_proc_xfer_partial): Likewise.
* linux-nat.h (struct lwp_info): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* m2-lang.c (m2_op_print_tab): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_variables): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* mi/mi-out.c (mi_table_begin): Likewise.
(mi_table_header): Likewise.
* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
(mips_linux_insert_watchpoint): Likewise.
(mips_linux_remove_watchpoint): Likewise.
* nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
* nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
(mips_linux_watch_type_to_irw): Likewise.
* nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_hw_watchpoint): Likewise.
(procfs_can_use_hw_breakpoint): Likewise.
(procfs_remove_hw_watchpoint): Likewise.
(procfs_insert_hw_watchpoint): Likewise.
* p-lang.c (pascal_op_print_tab): Likewise.
* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
* ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
* procfs.c (procfs_can_use_hw_breakpoint): Likewise.
(procfs_insert_watchpoint): Likewise.
(procfs_remove_watchpoint): Likewise.
* psymtab.c (recursively_search_psymtabs): Likewise.
* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
(m32r_insert_watchpoint): Likewise.
* remote-mips.c (mips_can_use_watchpoint): Likewise.
(mips_insert_watchpoint): Likewise.
(mips_remove_watchpoint): Likewise.
* remote.c (watchpoint_to_Z_packet): Likewise.
(remote_insert_watchpoint): Likewise.
(remote_remove_watchpoint): Likewise.
(remote_check_watch_resources): Likewise.
* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
(s390_can_use_hw_breakpoint): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
* target.h (struct target_ops): Likewise.
* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
* ui-out.c (struct ui_out_hdr): Likewise.
(append_header_to_list): Likewise.
(get_next_header): Likewise.
(verify_field): Likewise.
(ui_out_begin): Likewise.
(ui_out_field_int): Likewise.
(ui_out_field_fmt_int): Likewise.
(ui_out_field_skip): Likewise.
(ui_out_field_string): Likewise.
(ui_out_field_fmt): Likewise.
* varobj.c (new_variable): Likewise.
* x86-nat.c (x86_insert_watchpoint): Likewise.
(x86_remove_watchpoint): Likewise.
(x86_can_use_hw_breakpoint): Likewise.
* xtensa-tdep.h (struct gdbarch_tdep): Likewise.
* inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
previously anonymous enumeration type..
* linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
value.
* target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
(target_debug_print_enum_bptype): New.
* target-delegates.c: Regenerate.
|
|
gdb/ChangeLog:
* inflow.c (initial_gdb_ttystate): Tweak comment.
|
|
gdb/ChangeLog:
* inflow.c (set_initial_gdb_ttystate): Add empty line after
comment documenting function.
|
