| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
directly instead of calling wait_for_inferior / resume.
* infcmd.c (kill_if_already_running): Do not call no_shared_libraries
or init_wait_for_inferior.
(run_command_1): Call init_wait_for_inferior.
|
|
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
|
|
continuations.
* gdbthread.h (struct thread_info): Add comments around
continuations and intermediate_continuations.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments.
* infrun.c (fetch_inferior_event): Only call normal_stop if
stop_soon is NO_STOP_QUIETLY.
(context_switch): Don't context-switch the continuations.
* thread.c (clear_thread_inferior_resources): Discard all
continuations of the thread we're clearing.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments, and the code referencing
them.
* utils.c: Include "gdbthread.h".
(cmd_continuation, intermediate_continuation): Delete.
(add_continuation): Add thread_info* argument. Install the
continuation on it.
(restore_thread_cleanup): New.
(do_all_continuations_ptid, do_all_continuations_thread_callback):
New.
(do_all_continuations): Reimplement.
(discard_all_continuations_thread_callback,
discard_all_continuations_thread): New.
(discard_all_continuations): Reimplement.
(add_intermediate_continuation): Add thread_info* argument.
Install the continuation on it.
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread): New.
(do_all_intermediate_continuations): Reimplement.
(discard_all_intermediate_continuations_thread_callback): New.
(discard_all_intermediate_continuations_thread): New.
(discard_all_intermediate_continuations): Reimplement.
* breakpoint.c (until_break_command): Install the continuation on
the current thread.
* defs.h (cmd_continuation, intermediate_continuation): Delete.
(struct thread_info): Forward declare.
(add_continuation, add_intermediate_continuation): Add
thread_info* argument.
(do_all_continuations_thread, discard_all_continuations_thread)
(do_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations_thread): Declare.
* inf-loop.c (inferior_event_handler): In non-stop only run
continuations on the thread that stopped. In all-stop, run
continuations on all threads.
* infcmd.c (step_once, finish_command): Adjust.
|
|
stop_step.
* inferior.h (stop_step): Delete.
* gdbthread.h (struct thread_info): Add comments to stop_step.
(save_infrun_state, load_infrun_state): Remove stop_step argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_step argument, and references to it.
* infrun.c (clear_proceed_status): Clear stop_step.
(fetch_inferior_event): Adjust.
(context_switch): Don't context-switch stop_step.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* infcmd.c (stop_step): Delete.
(step_1, step_1_continuation, step_once, until_next_command):
Adjust.
|
|
step_multi.
* inferior.h (step_multi): Delete.
* gdbthread.h (struct thread_info): Add comments around
step_multi.
(save_infrun_state, load_infrun_state): Remove step_multi
parameter.
* thread.c (load_infrun_state, save_infrun_state): Remove
step_multi argument, and references to it.
* infcmd.c (step_multi): Delete.
(step_1): Adjust.
(step_1_continuation, until_next_command): Adjust.
* infrun.c (fetch_inferior_event): Adjust.
(context_switch): Don't context-switch step_multi.
(print_stop_reason, normal_stop): Adjust.
|
|
stop_signal.
* inferior.h (stop_signal): Delete.
* gdbthread.h (save_infrun_state, load_infrun_state): Remove
stop_signal argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_signal argument. Don't reference it.
* infcmd.c (stop_signal): Delete.
(program_info): Adjust.
* infrun.c (resume): Clear stop_signal.
(proceed): Adjust. Pass the last stop_signal to the thread we're
resuming.
(context_switch): Don't context-switch stop_signal.
(handle_inferior_event, keep_going): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* fbsd-nat.c: Include "gdbthread.h".
(find_signalled_thread, find_stop_signal): New.
(fbsd_make_corefile_notes): Use it.
* fork-child.c (startup_inferior): Adjust.
* linux-nat.c (get_pending_status): Adjust.
(linux_nat_do_thread_registers): Adjust.
(find_signalled_thread, find_stop_signal): New.
(linux_nat_do_thread_registers): Add stop_signal parameter.
(struct linux_nat_corefile_thread_data): Add stop_signal member.
(linux_nat_corefile_thread_callback): Pass stop_signal.
(linux_nat_do_registers): Delete.
(linux_nat_make_corefile_notes): Use find_stop_signal. Assume
there's always a thread.
* procfs.c (find_signalled_thread, find_stop_signal): New.
(find_stop_signal): New.
(procfs_do_thread_registers): Add stop_signal parameter.
(struct procfs_corefile_thread_data): Add stop_signal member.
(procfs_corefile_thread_callback): Pass args->stop_signal.
(procfs_make_note_section): Find the last stop_signal.
* solib-irix.c: Include gdbthread.h.
(irix_solib_create_inferior_hook): Adjust.
* solib-osf.c: Include gdbthread.h.
(osf_solib_create_inferior_hook): Adjust.
* solib-sunos.c: Include gdbthread.h.
(sunos_solib_create_inferior_hook): Adjust.
* solib-svr4.c: Include gdbthread.h.
(svr4_solib_create_inferior_hook): Adjust.
* win32-nat.c (do_initial_win32_stuff): Adjust.
|
|
proceed_to_finish.
(save_infrun_state, load_infrun_state): Remove proceed_to_finish
argument.
* thread.c (load_infrun_state, save_infrun_state): Delete
proceed_to_finish argument and references to it.
* infcall.c (call_function_by_hand): Adjust.
* infcmd.c (finish_command): Adjust.
* infrun.c (proceed_to_finish): Delete.
(clear_proceed_status): Adjust.
(context_switch): Don't context-switch proceed_to_finish.
(normal_stop, save_inferior_status, restore_inferior_status):
Adjust.
|
|
* breakpoint.h (bpstat_do_actions): Remove bpstat* argument.
* breakpoint.c (bpstat_do_actions): Rename to ...
(bpstat_do_actions_1): ... this. Make static. Change return type
to int. Return true if a breakpoint proceeded.
(bpstat_do_actions): New, as wrapper around bpstat_do_actions_1.
(delete_breakpoint): Don't reference the global stop_bpstat; it's
gone.
* gdbthread.h (struct thread_info): Add stop_bpstat.
(save_infrun_state, load_infrun_state): Remove stop_bpstat
argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_bpstat argument, and the code referencing it.
* infcall.c: Include "gdbthread.h".
(call_function_by_hand): Adjust.
* exceptions.c: Include "gdbthread.h".
(throw_exception): Adjust.
* infcmd.c (stop_bpstat): Delete.
(continue_command): In all-stop, set the ignore count on the
thread that reported the stop. In non-stop, set it on the current
thread.
(finish_command_continuation): Adjust.
(program_info): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch stop_bpstat.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* inf-loop.c (inferior_event_handler): Remove parameter to
bpstat_do_actions call.
* top.c (command_loop): Remove parameter to bpstat_do_actions
call. Call it unconditionally.
* event-top.c (command_handler): Ditto.
* python/python.c (execute_gdb_command): Ditto.
|
|
* gdbthread.h (save_infrun_state, load_infrun_state): Remove
step_over_calls argument.
* thread.c (save_infrun_state, load_infrun_state): Remove
step_over_calls argument. Adjust.
* infcmd.c (step_over_calls): Delete.
(step_1): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch step_over_calls.
(handle_inferior_event, save_inferior_status)
(restore_inferior_status): Adjust.
|
|
directly.
* infrun.c (stepping_over_breakpoint, step_resume_breakpoint):
Delete.
(struct thread_stepping_state): Delete.
(gtss, tss): Delete.
(follow_inferior_reset_breakpoints, follow_exec)
(resume, clear_proceed_status): Adjust.
(prev_pc): Delete.
(proceed, start_remote, init_wait_for_inferior): Adjust.
(struct execution_control_state): Add event_thread member.
(delete_step_resume_breakpoint_callback)
(delete_step_thread_step_resume_breakpoint)
(delete_step_thread_step_resume_breakpoint_cleanup)
(delete_step_thread_step_resume_breakpoint): New.
(wait_for_inferior, init_execution_control_state): Use
delete_step_thread_step_resume_breakpoint_cleanup.
(wait_for_inferior): Set the event_thread.
(fetch_inferior_event): Ditto. Delete the step-resume breakpoint
with delete_step_thread_step_resume_breakpoint.
(init_thread_stepping_state): Change parameter type to
thread_info. Adjust.
(context_switch): Don't context switch prev_pc,
stepping_over_breakpoint, step_resume_breakpoint,
step_range_start, step_range_end, step_frame_id,
tss->stepping_over_breakpoint,
tss->stepping_through_solib_after_catch,
tss->stepping_through_solib_catchpoints, tss->current_line, or
tss->current_symtab.
(adjust_pc_after_break, handle_inferior_event)
(currently_stepping, step_into_function)
(insert_step_resume_breakpoint_at_sal)
(insert_longjmp_resume_breakpoint, keep_going): Adjust.
(clear_stepping_state): New.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* gdbthread.h (struct thread_info): Comments describing the
members moved here. Add step_after_step_resume_breakpoint.
(delete_step_resume_breakpoint): Add thread_info argument.
(save_infrun_state, load_infrun_state): Remove prev_pc,
trap_expected, step_resume_breakpoint, step_range_start,
step_range_end, step_frame_id, another_trap,
stepping_through_solib_after_catch,
stepping_through_solib_catchpoints, current_line and
current_symtab function arguments.
(inferior_thread): Declare.
* thread.c (inferior_thread): New.
(delete_step_resume_breakpoint): Add a thread_info parameter and
rewrite.
(load_infrun_state, save_infrun_state): Remove prev_pc,
trap_expected, step_resume_breakpoint, step_range_start,
step_range_end, step_frame_id, stepping_over_breakpoint,
stepping_through_solib_after_catch,
stepping_through_solib_catchpoints, current_line and
current_symtab args. Remove code referencing them.
* infcmd.c (step_range_start, step_range_end, step_frame_id):
Delete.
(step_1, step_once, until_next_command): Adjust.
* inferior.h (step_range_start, step_range_end, step_frame_id):
Delete.
* linux-nat.c (linux_child_follow_fork): If following the child,
move the step state to it. Adjust.
* inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
|
|
member to "struct obj_section *".
* tracepoint.h (struct tracepoint): Likewise.
* symtab.h (struct general_symbol_info): Replace bfd_section
member with obj_section.
(struct symtab_and_line): Change type of section member to
"struct obj_section *".
(SYMBOL_BFD_SECTION): Remove macro, replace by ...
(SYMBOL_OBJ_SECTION): ... this.
* minsym.c (prim_record_minimal_symbol_and_info): Record symbol
section as obj_section instead of bfd_section.
* ada-lang.c (ada_decode_symbol): Use gsymbol->obj_section
directly instead of looking of obj_section from bfd_section.
* objfiles.h (find_pc_sect_section): Remove.
* objfiles.c (find_pc_sect_section): Remove.
(find_pc_section): Inline find_pc_sect_section code.
* symfile.h (find_pc_overlay): Return struct obj_section *.
(find_pc_mapped_section): Likewise.
(section_is_overlay, section_is_mapped): Change type of section
argument to struct obj_section *.
(pc_in_mapped_range, pc_in_unmapped_range): Likewise.
(overlay_mapped_address, overlay_unmapped_address): Likewise.
(symbol_overlayed_address): Likewise.
* symtab.h (symbol_overlayed_address): Likewise.
* symfile.c (overlay_is_mapped): Remove.
(section_is_mapped): Inline overlay_is_mapped code. Update.
(overlay_invalidate_all): Update.
(section_is_overlay): Change section argument to type
"struct obj_section *". Use bfd_ methods.
(pc_in_unmapped_range): Likewise. Handle relocated sections.
(pc_in_mapped_range): Likewise. Handle relocated sections.
(sections_overlap): Likewise.
(overlay_unmapped_address): Likewise.
(overlay_mapped_address): Likewise.
(symbol_overlayed_address): Likewise.
(find_pc_overlay): Return struct obj_section *.
(find_pc_mapped_section): Likewise.
(list_overlays_command): Update.
(map_overlay_command, unmap_overlay_command): Update.
(simple_overlay_update): Update.
* block.h (blockvector_for_pc_sect): Change section argument
to type "struct obj_section *".
(block_for_pc_sect): Likewise.
* block.c (blockvector_for_pc_sect): Change section argument
to type "struct obj_section *".
(block_for_pc_sect): Likewise.
* symtab.h (find_pc_sect_function, find_pc_sect_psymtab,
find_pc_sect_symtab, find_pc_sect_psymbol, find_pc_sect_line,
lookup_minimal_symbol_by_pc_section, find_function_start_pc): Likewise.
(matching_bfd_sections): Rename to ...
(matching_obj_sections): ... this. Update argument types.
* blockframe.c (find_pc_sect_function): Likewise.
* breakpoint.c (describe_other_breakpoints): Likewise.
(breakpoint_has_pc, check_duplicates_for): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Likewise.
(lookup_minimal_symbol_by_pc_section): Likewise.
* symtab.c (find_pc_sect_psymtab_closer): Likewise.
(find_pc_sect_psymtab, find_pc_sect_psymbol, find_pc_sect_symtab,
find_pc_sect_line, find_function_start_pc): Likewise.
(matching_bfd_sections): Rename to ...
(matching_obj_sections): ... this. Update argument types.
* blockframe.c (find_pc_partial_function): Update to section
type changes. No longer call find_pc_sect_section.
(cache_pc_function_section): Change to type "struct obj_section *".
* breakpoint.c (resolve_sal_pc): Update to section type changes.
* exec.c (xfer_memory): Likewise.
* findvar.c (read_var_value): Likewise.
* infcmd.c (jump_command): Likewise.
* linespec.c (minsym_found): Likewise.
* maint.c (maintenance_translate_address): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Likewise.
(lookup_solib_trampoline_symbol_by_pc): Likewise.
* parse.c (write_exp_msymbol): Likewise.
* printcmd.c (build_address_symbolic): Likewise.
(address_info, sym_info): Likewise.
* symmisc.c (dump_msymbols, print_symbol): Likewise.
* symtab.c (fixup_section): Likewise.
(fixup_symbol_section, fixup_psymbol_section): Likewise.
(find_pc_line, find_function_start_sal): Likewise.
* target.c (memory_xfer_partial): Likewise.
* hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline): Likewise.
* spu-tdep.c (spu_overlay_update): Likewise.
|
|
(frame_map_name_to_regnum): Remove prototype.
* frame.c (frame_map_regnum_to_name): Remove.
(frame_map_name_to_regnum): Remove.
(frame_unwind_register_value): Use user_reg_map_regnum_to_name
instead of frame_map_regnum_to_name.
* ax-gdb.c: Include "user-regs.h".
(gen_expr): Use user_reg_map_name_to_regnum instead of
frame_map_name_to_regnum.
* eval.c: Include "user-regs.h".
(evaluate_subexp_standard): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* infcmd.c (registers_info): Likewise.
* parse.c: Include "user-regs.h".
(write_dollar_variable): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* tracepoint.c: Include "user-regs.h".
(encode_actions): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* valops.c: Include "user-regs.h".
(value_fetch_lazy): Use user_reg_map_regnum_to_name instead
of frame_map_regnum_to_name.
|
|
* infcmd.c (run_command_1, attach_command): If non-stop mode
is requested, verify the target supports it.
* linux-nat.c (linux_nat_supports_non_stop): New.
(linux_nat_add_target): Register the above.
* target.c (find_default_supports_non_stop)
(target_supports_non_stop): New.
(init_dummy_target): Register find_default_supports_non_stop.
* target.h (struct target_ops): New field to_supports_non_stop.
(target_supports_non_stop): New.
|
|
|
|
(target_pre_inferior): Call no_shared_libraries.
* infcmd.c (run_command_1): Do not call objfile_purge_solibs
or clear_solib.
(attach_command): Do not call clear_solib.
|
|
* cli/cli-decode.h (CMD_ASYNC_OK, set_cmd_async_ok)
(get_cmd_async_ok): Remove.
* cli/cli-decode.c (set_cmd_async_ok, get_cmd_async_ok): Remove.
* cli/cli-cmds.c (init_cli_cmds): Don't use set_cmd_async_ok.
* infcmd.c (_initialize_infcmd): Likewise.
* thread.c (_initialize_thread): Likewise.
|
|
Rewrite continuations internals on top of cleanups and plug
continuation arguments leaks.
* defs.h (struct continuation): Make it opaque.
(add_continuation, add_intermediate_continuation): Drop the int
argument of the continuation hook argument. Add
continuation_free_args argument.
(do_all_continuations, do_all_intermediate_continuations): Drop
the error_p argument.
* utils.c (add_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_continuations): Drop error argument. Reimplement on top
of cleanups.
(discard_all_continuations): Reimplement on top of cleanups.
(add_intermediate_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_intermediate_continuations): Drop error argument.
Reimplement on top of cleanups.
(discard_all_intermediate_continuations): Reimplement on top of
cleanups.
* breakpoint.c (until_break_command_continuation): Drop error
argument. Add xfree as continuation argument deleter.
* inf-loop.c (inferior_event_handler): On error, discard all
continuations. Adjust to new do_all_intermediate_continuations
and do_all_continuations interfaces.
* infcmd.c (step_1_continuation): Drop error_p argument. Adjust.
Pass xfree as continuation argument deleter.
(finish_command_continuation): Drop error_p argument. Adjust.
(finish_command_continuation_free_arg): New.
(finish_command): Pass finish_command_continuation_free_arg as
continuation argument deleter. Adjust to new do_all_continuations
interfaces.
(attach_command_continuation): Drop error_p argument.
(attach_command_continuation_free_args): New.
(attach_command): Pass attach_command_continuation_free_args as
continuation argument deleter.
* interps.c (interp_set): Adjust to new do_all_continuations
interfaces.
* event-top.c (stdin_event_handler): In error, also discard the
intermediate continuations.
|
|
* top.c (execute_command): Remove unused arg1 and arg2 locals.
* breakpoint.c (struct until_break_command_continuation_args):
New.
(until_break_command_continuation): Take a void* instead of a
continuations_arg. Adjust.
(until_break_command): Adjust to use struct
until_break_command_continuation_args instead of struct
continuation_arg.
* infcmd.c (struct step_1_continuation_args): New.
(step_1_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct step_1_continuation_args.
(step_once): Adjust to use struct step_1_continuation_args.
(struct finish_command_continuation_args): New.
(finish_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
finish_command_continuation_args.
(finish_command): Adjust to use struct
finish_command_continuation_args.
(struct attach_command_continuation_args): New.
(attach_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
attach_command_continuation_args.
(attach_command): Adjust to use struct
attach_command_continuation_args.
* defs.h (struct continuation_arg): Delete.
(struct continuation): Replace the struct continuation_arg*
parameter of continuation_hook by a void*. Replace "arg_list"
member by a new "args" member with void* type.
(add_continuation, add_intermediate_continuation): Replace struct
continuation_arg type usages by void* usages.
* utils.c (add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Replace struct
continuation_arg type usages by void* usages. Pass "args" instead
of "arg_list".
|
|
* infcmd.c (continue_1): New, extracted from
(continue_command): ...here.
(interrupt_target_1): New, extracted from
(interrupt_target_command): ...here.
* inferior.h (continue_1, interrupt_target_1): New.
* mi/mi-main.c (mi_cmd_exec_continue)
(mi_cmd_exec_interrupt): Handle --all.
|
|
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
|
|
* infcmd.c (proceed_thread_callback, do_context_switch_to): New.
(continue_command): Add "-a" option.
(interrupt_target_command): Add "-a" option.
(_initialize_infcmd): Add extend help of continue and interrupt
command to mention the new "-a" option. Mark "continue" async ok.
|
|
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
|
|
* config/i386/nm-i386gnu.h (ATTACH_NO_WAIT): Delete.
* target.h (struct target_ops): Add to_attach_no_wait member.
(target_attach_no_wait): New.
* target.c (update_current_target): Inherit to_attach_no_wait.
* infcmd.c: Replace ATTACH_NO_WAIT compile time check by
target_attach_no_wait runtime check.
* gnu-nat.c (init_gnu_ops): Set to_attach_no_wait in gnu_ops.
* win32-nat.c (init_win32_ops): Set to_attach_no_wait in
win32_ops.
|
|
* infcall.c (call_function_by_hand): Set both
suppress_resume_observer and suppress_stop_observer.
* infcmd.c (suppress_run_stop_observers): Split into...
(suppress_resume_observer, suppress_stop_observer): ...those.
(finish_command_continuation): Clear suppress_stop_observer.
(finish_command): Set suppress_stop_observer.
* inferior.h (suppress_run_stop_observers): Split into...
(suppress_resume_observer, suppress_stop_observer): ...those.
* infrun.c (normal_stop): Check for suppress_stop_observer.
* thread.c (set_running): Check for suppress_resume_observer.
|
|
* Makefile.in: Update dependencies.
* gdbthread.h (struct thread_info): New field
running_.
(set_running, is_running): New.
* thread.c (set_running, is_running): New.
* inferior.h (suppress_normal_stop_observer): Rename to...
(suppress_run_stop_observers): ..this.
* infcmd.c (suppress_normal_stop_observer): Rename to...
(suppress_run_stop_observers): ..this.
(finish_command_continuation, finish_command): Adjust.
* infcall.c (call_function_by_hand): Adjust.
* infrun.c (normal_stop): Call set_running.
* target.c (target_resume): New. Call set_running.
* target.h (target_resume): Convert from macro to
a function.
* mi/mi-interp.c (mi_on_resume): New.
(mi_interpreter_init): Register mi_on_resume.
|
|
* mi/mi-interp.c (mi_on_normal_stop): New.
(mi_interpreter_init): Register mi_on_normal_stop.
(mi_interpreter_exec_continuation): Remove.
(mi_cmd_interpreter_exec): Don't register the above.
* mi/mi-main.c (captured_mi_execute_command): Don't care
about sync_execution.
(mi_execute_async_cli_command): Don't install continuation. Don't
print *stopped.
(mi_exec_async_cli_cmd_continuation): Remove.
|
|
* inferior.h (suppress_normal_stop_observer): New.
* infcall.c (call_function_by_hand): Disable stop events when
doing function calls.
* infmcd.c (suppress_normal_stop_observer): New.
(finish_command_continuation): Call normal_stop observer
explicitly.
(finish_command): Disable stop events inside proceed.
* infrun.c (normal_stop): Don't call normal stop observer if
suppressed of if multi-step is in progress.
|
|
* infrun.c (finish_command): Don't pass cleanup
to continuation.
(finish_command_continuation): Don't grab cleanup from
the passed data, as we don't use, and cannot, use it anyway.
|
|
|
|
instead of using the current_language. Update calls to val_print
throughout.
(common_val_print): Add new langauge parameter and pass it to
val_print.
* value.h (struct language_defn): Add opaque declaration.
(val_print, common_val_print): Update declarations.
* stack.c (print_frame_args): Update call to common_val_print
using the appropriate language.
* mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
* c-valprint, f-valprint.c, m2-valprint.c, mt-tdep.c, infcmd.c,
mi/mi-main.c, jv-valprint.c, ada-valprint.c, varobj.c, p-valprint.c,
scm-valprint.c, cp-valprint.c, sh64-tdep.c, printcmd.c:
#include "language.h" if necessary.
Update calls to val_print and common_val_print.
* Makefile.in (mt-tdep.o, sh64-tdep.o, mi-cmds.o, mi-main.o):
Update dependencies.
|
|
NULL dereferencing.
|
|
* breakpoint.c (update_breakpoints_after_exec): Delete bp_longjmp
and bp_longjmp_resume breakpoints.
(breakpoint_address_is_meaningful): Claim bp_longjmp_resume as
meaningful.
(create_longjmp_breakpoint): Don't create bp_longjmp_resume
breakpoints. Create bp_longjmp breakpoints as momentary
breakpoints.
(enable_longjmp_breakpoint): Delete.
(set_longjmp_breakpoint): New.
(disable_longjmp_breakpoint): Delete.
(delete_longjmp_breakpoint): New.
(set_longjmp_resume_breakpoint): Delete.
(set_momentary_breakpoint_at_pc): New.
(breakpoint_re_set_one): Don't delete bp_longjmp and
bp_longjmp_resume breakpoints.
(breakpoint_re_set): Don't create longjmp and longjmp-resume
breakpoints.
* infrun.c (step_resume_breakpoint): Add comment.
(struct execution_control_state): Delete handling_longjmp member.
(init_execution_control_state). Don't clear handling_longjmp.
(context_switch): Don't context switch handling_longjmp.
(handle_inferior_event): If handling a bp_longjmp breakpoint,
create a bp_longjmp_resume breakpoint, and set it as current
step_resume_breakpoint, then step over the longjmp breakpoint. If
handling a bp_longjmp_resume breakpoint, don't delete the longjmp
breakpoint, delete the longjmp-resume breakpoint, and stop
stepping.
(currently_stepping): Remove handling_longjmp from expression.
(insert_step_resume_breakpoint_at_sal): Update comment.
(insert_longjmp_resume_breakpoint): New.
* breakpoint.h (set_momentary_breakpoint_at_pc): Declare.
(enable_longjmp_breakpoint, disable_longjmp_breakpoint): Delete
declarations.
(set_longjmp_breakpoint, delete_longjmp_breakpoint): Declare.
(set_longjmp_resume_breakpoint): Delete declaration.
* gdbthread.h (save_infrun_state): Remove handling_longjmp
parameter.
(load_infrun_state): Delete *handling_longjmp parameter.
* thread.c (save_infrun_state): Remove handling_longjmp parameter.
Update body.
(load_infrun_state): Delete *handling_longjmp parameter. Update
body.
* infcmd.c (disable_longjmp_breakpoint_cleanup): Delete.
(delete_longjmp_breakpoint_cleanup): New.
(step_1): Call set_longjmp_breakpoint instead of
enable_longjmp_breakpoint. Use delete_longjmp_breakpoint_cleanup
instead of disable_longjmp_breakpoint_cleanup when making cleanup.
(step_1_continuation): Pass thread id in the continuation args to
step_once.
(step_once): Add thread parameter. Pass thread id the the
continuation.
gdb/testsuite/
* gdb.cp/annota2.exp: Adjust to breakpoints invalidations at
different times.
|
|
Pedro Alves <pedro@codesourcery.com>
Based on work by Jan Kratochvil <jan.kratochvil@redhat.com> and Jeff
Johnston <jjohnstn@redhat.com>.
* NEWS: Mention attach to stopped process fix.
* infcmd.c (detach_command, disconnect_command): Discard the thread
list.
* infrun.c (handle_inferior_event): Do not ignore non-SIGSTOP while
attaching. Use signal_stop_state.
(signal_stop_state): Check stop_soon.
* linux-nat.c (kill_lwp): Declare earlier.
(pid_is_stopped, linux_nat_post_attach_wait): New.
(lin_lwp_attach_lwp): Use linux_nat_post_attach_wait. Update
comments.
(linux_nat_attach): Use linux_nat_post_attach_wait.
(detach_callback, linux_nat_detach): Improve handling for signalled
processes.
(linux_nat_pid_to_str): Always print out the LWP ID if it differs
from the process ID.
* Makefile.in (infcmd.o): Update.
2008-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.threads/attach-into-signal.c, gdb.threads/attach-into-signal.exp,
gdb.threads/attach-stopped.c, gdb.threads/attach-stopped.exp,
gdb.threads/attachstop-mt.c, gdb.threads/attachstop-mt.exp: New.
|
|
breakpoint if we're not going to do another step.
|
|
* breakpoint.c (until_break_command_continuation): Add
the 'error' parameter. Directly delete the breakoint as
opposed to running cleanups.
(until_break_command): Install continuation only
after starting the target. Don't use exec cleanups,
use ordinary cleanups. Discard cleanups is successfully
started the target in async mode.
(make_cleanup_delete_breakpoint): Remove.
* breakpoint.h (make_cleanup_delete_breakpoint): Remove
declaration.
* defs.h (do_exec_cleanups, make_exec_cleanup): Remove
declarations.
(struct continations): Add the 'error' parameter to the
continuation_hook field.
(add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Add the 'error' parameter.
* exceptions.c (throw_exception): Don't call do_exec_cleanups.
* inf-loop.c (inferior_event_handler): Instead of calling
discard_all_continuations, use do_all_continuations with 1 as
'error' parameter. Pass 0 as 'error' parameter in existing uses
of discard_all_continuations.
* infcmd.c (step_1): Do not use exec cleanup. For async case, discard
cleanups.
(step_once): Install continuation only after resuming the target.
(step_1_continuation): Disable longjmp breakpoint on error.
(finish_command_continuation): Add the error parameter. Delete
the finish breakpoint directly, do not use cleanups.
(finish_command): Do not use exec_cleanups. Always setup
continuation. For sync case, immediately run them.
(attach_command_continuation): Add the error parameter.
* infrun.c (fetch_inferior_event): Do not use exec cleanups to
remove step_resume_breakpoint -- adjust delete it directly.
* interps.c (interp_set): Adjust call to do_all_continations.
* mi/mi-interp.c (mi_interpreter_exec_continuation): Do not
do exec cleanups.
* mi/mi-main.c (mi_cmd_target_select): Do not do exec
cleanups.
(mi_cmd_execute): Do not use exec_cleanup.
(mi_execute_async_cli_command): Simplify the string concatenation
logic. Do no use exec cleanup.
(mi_exec_async_cli_cmd_continuation): New parameter error.
Free last_async_command.
* top.c (command_line_handler_continuation): New parameter error.
* utils.c (exec_cleanup_chain, make_exec_cleanup)
(do_exec_cleanups): Remove.
(add_continuation, do_all_continations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): New parameter error.
|
|
--------------
* gdb.texinfo (Set SH Calling convention): New @item.
(Show SH Calling convention): Ditto.
ChangeLog:
----------
* NEWS: Add information on calling convention and new SH CLI options.
* sh-tdep.c (sh_cc_gcc): New static string.
(sh_cc_renesas): Ditto.
(sh_cc_enum): New static string array.
(sh_active_calling_convention): New static string pointer denoting
active user chosen ABI.
(sh_is_renesas_calling_convention): New function to return function
specific ABI, or user choice if necessary.
(sh_use_struct_convention): Rename first argument and turn around its
meaning. Check for renesas ABI and return accordingly.
(sh_use_struct_convention_nofpu): New function.
(sh_next_flt_argreg): Get function type as third parameter. Check
for renesas ABI and choose floating registers accordingly.
(sh_push_dummy_call_fpu): Check for ABI and choose argument slot and
struct return slot accordingly.
(sh_push_dummy_call_nofpu): Ditto.
(sh_return_value_nofpu): Call sh_use_struct_convention_nofpu from here.
Evaluate ABI and give to sh_use_struct_convention_nofpu.
(sh_return_value_fpu): Evaluate ABI and give to
sh_use_struct_convention.
(show_sh_command): New function.
(set_sh_command): Ditto.
(_initialize_sh_tdep): Initialize `set/show sh calling-convention
CLI command.
* gdbarch.sh (return_value): Add func_type argument.
* gdbarch.c: Regenerate.
* gdbarch.h: Ditto.
* eval.c (evaluate_subexp_standard): Rename local variable value_type to
val_type so as not to collide with value_type function. Call
using_struct_return with additional function type argument.
* infcall.c (call_function_by_hand): Call using_struct_return and
gdbarch_return_value with additional function type argument.
* infcmd.c (print_return_value): Take addition func_type argument.
Call gdbarch_return_value with additional function type argument.
(finish_command_continuation): Call print_return_value with additional
function type argument.
(finish_command): Ditto.
* sparc-tdep.c (sparc32_push_dummy_code): Call using_struct_return with
additional function type argument.
* stack.c (return_command): Call using_struct_return and
gdbarch_return_value with additional function type argument.
* value.c (using_struct_return): Take additional function type argument.
* value.h (using_struct_return): Accommodate declaration.
* alpha-tdep.c (alpha_return_value): Add func_type argument.
* amd64-tdep.c (amd64_return_value): Ditto.
* arm-tdep.c (arm_return_value): Ditto.
* avr-tdep.c (avr_return_value): Ditto.
* cris-tdep.c (cris_return_value): Ditto.
* frv-tdep.c (frv_return_value): Ditto.
* h8300-tdep.c (h8300_return_value): Ditto.
(h8300h_return_value): Ditto.
* hppa-tdep.c (hppa32_return_value): Ditto.
(hppa64_return_value): Ditto.
* i386-tdep.c (i386_return_value): Ditto.
* ia64-tdep.c (ia64_return_value): Ditto.
* iq2000-tdep.c (iq2000_return_value): Ditto.
* m32c-tdep.c (m32c_return_value): Ditto.
* m32r-tdep.c (m32r_return_value): Ditto.
* m68hc11-tdep.c (m68hc11_return_value): Ditto.
* m68k-tdep.c (m68k_return_value): Ditto.
(m68k_svr4_return_value): Ditto.
* m88k-tdep.c (m88k_return_value): Ditto.
* mep-tdep.c (mep_return_value): Ditto.
* mips-tdep.c (mips_eabi_return_value): Ditto.
(mips_n32n64_return_value): Ditto.
(mips_o32_return_value): Ditto.
(mips_o64_return_value): Ditto.
* mn10300-tdep.c (mn10300_return_value): Ditto.
* mt-tdep.c (mt_return_value): Ditto.
* ppc-linux-tdep.c (ppc_linux_return_value): Ditto.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Ditto.
(ppc_sysv_abi_broken_return_value): Ditto.
(ppc64_sysv_abi_return_value): Ditto.
* ppc-tdep.h (ppc_sysv_abi_return_value): Ditto.
(ppc_sysv_abi_broken_return_value): Ditto.
(ppc64_sysv_abi_return_value): Ditto.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Ditto.
* rs6000-tdep.c (rs6000_return_value): Ditto.
* s390-tdep.c (s390_return_value): Ditto.
* score-tdep.c (score_return_value): Ditto.
* sh-tdep.c (sh_return_value_nofpu): Ditto.
(sh_return_value_fpu): Ditto.
* sh64-tdep.c (sh64_return_value): Ditto.
* sparc-tdep.c (sparc32_return_value): Ditto.
* sparc64-tdep.c (sparc64_return_value): Ditto.
* spu-tdep.c (spu_return_value): Ditto.
* v850-tdep.c (v850_return_value): Ditto.
* vax-tdep.c (vax_return_value): Ditto.
* xstormy16-tdep.c (xstormy16_return_value): Ditto.
* xtensa-tdep.c (xtensa_return_value): Ditto.
* gdbtypes.h (struct type): Add calling_convention member.
* dwarf2read.c (read_subroutine_type): Add calling convention read
from DW_AT_calling_convention attribute to function type.
|
|
(set_cmd_async_ok, get_cmd_async_ok): Declare.
* cli/cli-decode.c (set_cmd_async_ok): New function.
(get_cmd_async_ok): New function.
* cli/cli-cmds.c (init_cli_cmds): Mark "pwd", "help", "info", and
"show" as async-ok.
* top.c (execute_command): Use get_cmd_async_ok.
* infcmd.c: Include cli/cli-decode.h.
(_initialize_infcmd): Mark "interrupt" as async-ok.
* Makefile.in (infcmd.o): Depend on cli_decode_h.
|
|
(attach_command_continuation): New.
(attach_command): Support background async execution, and async
execution in synchronous mode.
|
|
the possible query.
|
|
* Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
* breakpoint.c (bpstat_do_actions): In async mode,
don't jump to top expecting stop_bpstat to be already
updated.
* event-loop.c (start_event_loop): Call async_enable_stdin
on exception.
* event-top.c (async_enable_stdin): Do nothing if sync_execution
is not set.
(command_handler): Do not setup continuation here.
(command_line_handler_continuation): Move to...
* top.c (command_line_handler_continuation): ... here.
(execute_command): In async mode, register continuation.
Don't check frame's language in running in async mode.
* exceptions.c (throw_exception): Don't do exec_error_cleanups.
* inf-loop.c (complete_execution): Inline into...
(inferior_event_handler): ... here. Clear target_executing before
doing any cleanups. Don't try to show prompt if the target was
resumed.
* infcmd.c (signal_command): Add support for async mode.
(finish_command): Only add continuation if the target was
successfully resumed.
* remote.c (init_async_opts): Register to_get_thread_local_address
handler.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
with sync_execution.
* tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
on exception.
|
|
|
|
target_require_runnable.
* target.c (target_require_runnable): New.
* target.h (target_require_runnable): Declare.
* gdb.texinfo (Starting): Mention always-running targets.
(Target Commands): Add an anchor for load.
(Connecting): Explain continue instead of run.
|
|
Thiago Jung Bauermann <bauerman@br.ibm.com>
* infcmd.c (default_print_registers_info): Also print hex
raw contents for TYPE_CODE_DECFLOAT registers.
* ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
* rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
(rs6000_register_name): Add support for DFP pseudo-registers.
(rs6000_pseudo_register_type): Likewise.
rs6000_pseudo_register_reggroup_p): Likewise.
(ppc_pseudo_register_read): New function.
(ppc_pseudo_register_write): Likewise.
(rs6000_pseudo_register_read): Likewise.
(rs6000_pseudo_register_write): Likewise.
(e500_pseudo_register_read): Move checks to
rs6000_pseudo_register_read.
(e500_pseudo_register_write): Move checks to
rs6000_pseudo_register_write.
(rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum. Install
rs6000_pseudo_register_read and rs6000_pseudo_register_write
in gdbarch if SPE or DFP is available. Adjust gdbarch's
num_pseudo_regs to account for DFP pseudo regs.
|
|
* NEWS: Mention exec tracing support.
* inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
exec events.
* infcmd.c (kill_if_already_running, detach_command)
(disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
* infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
(follow_exec): Do not check may_follow_exec. Do not mourn and push
targets. Apply the sysroot path to the loaded executable. Use
no_shared_libraries.
* linux-nat.c (linux_child_follow_fork): Print fork following
messages if verbose.
(kill_wait_callback): Kill again before waiting a second time.
* symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
no_shared_libraries.
* gdb.base/foll-exec.exp: Update header. Skip on remote targets.
Run on GNU/Linux.
(do_exec_tests): Check for systems which do not support catchpoints.
Do not match START.
* gdb.base/foll-fork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_fork_catchpoints): New.
(explicit_fork_child_follow, catch_fork_child_follow)
(tcatch_fork_parent_follow): Update expected messages.
(do_fork_tests): Use check_fork_catchpoints.
* gdb.base/foll-vfork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_vfork_catchpoints): New.
(vfork_parent_follow_to_bp, tcatch_vfork_then_child_follow): Update
expected messages.
(do_vfork_and_exec_tests): Use check_fork_catchpoints.
|
|
and use it.
(proceed, start_remote): Update call to wait_for_inferior.
* inferior.h (wait_for_inferior): Update declaration.
* fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
* inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
|
|
(print_section_info): Use gdbarch_from_bfd to get at the
current architecture. Replace current_gdbarch. Fix indention.
Replace deprecated_print_address_numeric by paddress.
* Makefile.in (exec.o) Add dependency to arch-utils.h.
* valprint.c (val_print_string): Replace
deprecated_print_address_numeric.
* tracepoint.c (trace_mention, scope_info): Likewise.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
(print_symbol, print_partial_symbols, maintenance_info_psymtabs)
(maintenance_check_symtabs): Likewise.
* symfile.c (list_overlays_command): Likewise.
* stack.c (frame_info, print_block_frame_labels): Likewise.
* printcmd.c (print_address, print_address_demangle)
(address_info): Likewise.
* corefile.c (memory_error): Likewise.
* infcmd.c (jump_command): Likewise.
* breakpoint.c (insert_bp_location, describe_other_breakpoints)
(mention, delete_breakpoint): Likewise.
* c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
* dwarf2read.c (dump_die): Likewise.
* ada-valprint.c (ada_val_print_1): Likewise.
* f-valprint.c (f_val_print): Likewise.
* linux-fork.c (info_forks_command): Likewise.
* m32r-com.c (m32r_load_section, m32r_load)
(m32r_upload_command): Likewise.
* ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
|
|
|
|
* defs.h (do_run_cleanups, make_run_cleanup): Remove
declarations.
* infcmd.c (run_command_1): Call clear_solib instead
of do_run_cleanups.
* jv-lang.c (java_rerun_cleanup): Remove, for lack of
any use.
* solib.c (solib_cleanup_queued, do_clear_solib): Remove.
(update_solib_lib): Don't setup run cleanup.
(no_shared_libraries): Call clear_solib, not do_clear_solib.
* utils.c (run_cleanup_chain, make_run_cleanup)
(do_run_cleanups): Remove.
|
|
* corelow.c (core_close): Don't check for CLEAR_SOLIB.
* infcmd.c (attach_command): Likewise.
|
|
* infcmd.c (registers_info): Check for a user register before
calling target's gdbarch_print_registers_info(). If found to be
so, extract the implicit value of user register and call
print_scalar_formatted().
* Makefile.in: (infcmd.o): Add $(user_regs_h).
|
