| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
(step_1_continuation): Wrap line.
(step_once): Adjust comment. Only install the continuation in
async mode.
|
|
instead of read_pc.
|
|
on the current frame's PC, not on stop_pc.
|
|
|
|
* infcmd.c (detach_command): Make nonstatic.
* inferior.h (detach_command): Declare.
* mi/mi-cmds.c (mi_cmds): Don't route -target-detach via CLI.
* mi/mi-cmds.h (mi_cmd_target_detach): Declare.
* mi/mi-main.c (find_thread_of_process, mi_cmd_target_detach): New.
|
|
(do_all_inferior_continuations)
(discard_all_inferior_continuations): Declare.
* utils.c (add_inferior_continuation)
(do_all_inferior_continuations)
(discard_all_inferior_continuations): New.
* inferior.h (struct inferior) <continuations>: New field.
* inferior.c (free_inferior): Discard all the inferior
continuations.
* inf-loop.c (inferior_event_handler): Do all current inferior
continuations.
* infcmd.c (attach_command): Register an inferior continuation
instead of a thread continuation.
* infrun.c (handle_inferior_event): If stop_soon is
STOP_QUIETLY_NO_SIGSTOP, also expect a TARGET_SIGNAL_0.
|
|
* infcmd.c (attach_command): Call async_enable_stdin
if exception is thrown.
|
|
fetch libraries and insert breakpoints after connecting.
* infcmd.c (post_create_inferior): If the solist is shared between
inferiors, no need to refetch it on every new inferior.
(detach_command): If the shared library list is shared between
inferiors, then don't clear it on every inferior detach.
* gdbarch.sh (has_global_solist): New.
* i386-dicos-tdep.c (i386_dicos_init_abi): Set
gdbarch_has_global_solist.
* target.c (target_pre_inferior): If the shared library list is
shared between inferiors, then don't clear it here, neither
invalidate the memory regions or clear the target description.
(target_detach): If the shared library list is shared between
inferiors, then don't remove breakpoints from the target here.
(target_disconnect): Comment.
* solib.c (update_solib_list): Check for null_ptid.
* breakpoint.c (insert_breakpoints, update_global_location_list):
If the shared library list is shared between inferiors, insert
breakpoints even if there's no execution.
(breakpoint_init_inferior): If the shared library list is shared
between inferiors, don't delete breakpoints or mark them
uninserted here.
* gdbarch.c, gdbarch.h: Regenerate.
|
|
specially.
testsuite/:
* gdb.base/args.exp: Add tests for newlines.
|
|
* varobj.c (value_get_print_value): Include valprint.h.
(value_get_print_value): Use get_formatted_print_options.
* value.h (struct value_print_options): Declare.
(value_print, val_print, common_val_print, val_print_string):
Update.
* value.c: Include valprint.h.
(show_values): Use get_user_print_options.
(show_convenience): Likewise.
* valprint.h (prettyprint_arrays, prettyprint_structs): Don't
declare.
(struct value_print_options): New type.
(vtblprint, unionprint, addressprint, objectprint, print_max,
inspect_it, repeat_count_threshold, output_format,
stop_print_at_null): Don't declare.
(user_print_options, get_user_print_options,
get_raw_print_options, get_formatted_print_options): Declare.
(print_array_indexes_p): Don't declare.
(maybe_print_array_index, val_print_array_elements): Update.
* valprint.c (print_max): Remove.
(user_print_options): New global.
(get_user_print_options, get_raw_print_options,
get_formatted_print_options): New functions.
(print_array_indexes, repeat_count_threshold, stop_print_at_null,
prettyprint_structs, prettyprint_arrays, unionprint,
addressprint): Remove.
(val_print): Remove format, deref_ref, pretty arguments; add
options. Update.
(common_val_print): Likewise.
(print_array_indexes_p): Remove.
(maybe_print_array_index): Remove format, pretty arguments; add
options. Update.
(val_print_array_elements): Remove format, deref_ref, pretty
arguments; add options. Update.
(val_print_string): Add options argument. Update.
(_initialize_valprint): Use user_print_options.
(output_format): Remove.
(set_output_radix_1): Use user_print_options.
* typeprint.c: Include valprint.h.
(objectprint): Don't declare.
(whatis_exp): Use get_user_print_options.
* tui/tui-regs.c: Include valprint.h.
(tui_register_format): Use get_formatted_print_options.
* tracepoint.c: Include valprint.h.
(addressprint): Don't declare.
(trace_mention): Use get_user_print_options.
(tracepoints_info): Likewise.
* stack.c (print_frame_args): Use get_raw_print_options.
(print_frame_info): Use get_user_print_options.
(print_frame): Likewise.
* sh64-tdep.c: Include valprint.h
(sh64_do_register): Use get_formatted_print_options.
* scm-valprint.c (scm_inferior_print): Remove format, deref_ref,
pretty arguments; add options.
(scm_scmlist_print): Likewise. Update.
(scm_scmval_print): Likewise.
(scm_val_print): Likewise.
(scm_value_print): Remove format, pretty arguments; add options.
Update.
* scm-lang.h (scm_value_print, scm_val_print, scm_scmval_print):
Update.
* scm-lang.c (scm_printstr): Add options argument.
* python/python-value.c: Include valprint.h.
(valpy_str): Use get_user_print_options.
* printcmd.c: Include valprint.h.
(addressprint): Don't declare.
(inspect_it): Remove.
(print_formatted): Remove format option; add options. Update.
(print_scalar_formatted): Likewise.
(print_address_demangle): Use get_user_print_options.
(do_examine): Use get_formatted_print_options.
(print_command_1): Likewise.
(output_command): Use get_formatted_print_options.
(do_one_display): Likewise.
(print_variable_value): Use get_user_print_options.
* p-valprint.c (pascal_val_print): Remove format, deref_ref,
pretty arguments; add options. Update.
(pascal_value_print): Remove format, pretty arguments; add
options. Update.
(vtblprint, objectprint): Don't declare.
(pascal_static_field_print): Remove.
(pascal_object_print_value_fields): Remove format, pretty
arguments; add options. Update.
(pascal_object_print_static_field): Likewise.
(_initialize_pascal_valprint): Use user_print_options. Update.
* p-lang.h (pascal_val_print, pascal_value_print,
pascal_printstr, pascal_object_print_value_fields): Update.
(vtblprint, static_field_print): Don't declare.
* p-lang.c (pascal_printstr): Add options argument. Update.
* objc-lang.c (objc_printstr): Add options argument. Update.
* mt-tdep.c: Include valprint.h.
(mt_registers_info): Use get_raw_print_options.
* mips-tdep.c: Include valprint.h.
(mips_print_fp_register): Use get_formatted_print_options.
(mips_print_register): Likewise.
* mi/mi-main.c: Include valprint.h.
(get_register): Use get_user_print_options.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Use get_formatted_print_options.
* mi/mi-cmd-stack.c: Include valprint.h.
(list_args_or_locals): Use get_raw_print_options.
* m2-valprint.c (print_function_pointer_address): Add addressprint
argument.
(m2_print_long_set): Remove format, pretty arguments.
(m2_print_unbounded_array): Remove format, deref_ref, pretty
arguments; add options. Update.
(print_unpacked_pointer): Remove format argument; add options.
Now static. Update.
(print_variable_at_address): Remove format, deref_ref, pretty
arguments; add options. Update.
(m2_print_array_contents): Likewise.
(m2_val_print): Likewise.
* m2-lang.h (m2_val_print): Update.
* m2-lang.c (m2_printstr): Add options argument. Update.
* language.h (struct value_print_options): Declare.
(struct language_defn) <la_printstr>: Add options argument.
<la_val_print>: Remove format, deref_ref, pretty argument; add
options.
<la_value_print>: Remove format, pretty arguments; add options.
<la_print_array_index>: Likewise.
(LA_VAL_PRINT, LA_VALUE_PRINT, LA_PRINT_STRING,
LA_PRINT_ARRAY_INDEX): Update.
(default_print_array_index): Update.
* language.c (default_print_array_index): Remove format, pretty
arguments; add options. Update.
(unk_lang_printstr): Add options argument.
(unk_lang_val_print): Remove format, deref_ref, pretty arguments;
add options.
(unk_lang_value_print): Remove format, pretty arguments; add
options.
* jv-valprint.c (java_value_print): Remove format, pretty
arguments; add options. Update.
(java_print_value_fields): Likewise.
(java_val_print): Remove format, deref_ref, pretty arguments; add
options. Update.
* jv-lang.h (java_val_print, java_value_print): Declare.
* infcmd.c: Include valprint.h.
(print_return_value): Use get_raw_print_options.
(default_print_registers_info): Use get_user_print_options,
get_formatted_print_options.
(registers_info): Use get_formatted_print_options.
* gdbtypes.h (struct value_print_options): Declare.
(print_scalar_formatted): Update.
* f-valprint.c (f77_print_array_1): Remove format, deref_ref,
pretty arguments; add options. Update.
(f77_print_array): Likewise.
(f_val_print): Likewise.
* f-lang.h (f_val_print): Update.
* f-lang.c (f_printstr): Add options argument. Update.
(c_value_print): Update declaration.
* expprint.c: Include valprint.h.
(print_subexp_standard): Use get_raw_print_options,
get_user_print_options.
* eval.c: Include valprint.h.
(objectprint): Don't declare.
(evaluate_subexp_standard): Use get_user_print_options.
* cp-valprint.c (vtblprint, objectprint, static_field_print):
Remove.
(cp_print_value_fields): Remove format, pretty arguments; add
options. Update.
(cp_print_value): Likewise.
(cp_print_static_field): Likewise.
(_initialize_cp_valprint): Use user_print_options. Update.
* c-valprint.c (print_function_pointer_address): Add addressprint
argument.
(c_val_print): Remove format, deref_ref, pretty arguments; add
options. Update.
(c_value_print): Add options argument. Update.
* c-lang.h (c_val_print, c_value_print, c_printstr): Update.
(vtblprint, static_field_print): Don't declare.
(cp_print_value_fields): Update.
* c-lang.c (c_printstr): Add options argument. Update.
* breakpoint.c: Include valprint.h.
(addressprint): Don't declare.
(watchpoint_value_print): Use get_user_print_options.
(print_one_breakpoint_location): Likewise.
(breakpoint_1, print_it_catch_fork, print_it_catch_vfork, mention,
print_exception_catchpoint): Likewise.
* auxv.c (fprint_target_auxv): Don't declare addressprint. Use
get_user_print_options.
* ada-valprint.c (struct ada_val_print_args): Remove format,
deref_ref, and pretty; add options.
(print_optional_low_bound): Add options argument.
(val_print_packed_array_elements): Remove format and pretty
arguments; add options. Update.
(printstr): Add options argument. Update.
(ada_printstr): Likewise.
(ada_val_print): Remove format, deref_ref, pretty arguments; add
options argument. Update.
(ada_val_print_stub): Update.
(ada_val_print_array): Remove format, deref_ref, pretty arguments;
add options. Update.
(ada_val_print_1): Likewise.
(print_variant_part): Likewise.
(ada_value_print): Remove format, pretty arguments; add options.
Update.
(print_record): Likewise.
(print_field_values): Likewise.
* ada-lang.h (ada_val_print, ada_value_print, ada_printstr):
Update.
* ada-lang.c (ada_print_array_index): Add options argument; remove
format and pretty arguments.
(print_one_exception): Use get_user_print_options.
gdb/testsuite
* gdb.base/exprs.exp (test_expr): Add enum formatting tests.
|
|
field.
(target_supports_multi_process): New define.
* target.c (update_current_target): Inherit and de_fault
to_supports_multi_process.
* infcmd.c (attach_command): Allow attaching to multiple processes
if the target supports it.
(detach_command): If the target claims there is still execution,
don't clear the thread list.
* remote.c (remote_supports_multi_process): New.
(init_remote_ops): Register remote_supports_multi_process.
|
|
* remote.c (pending_stop_reply): New.
(struct remote_state) <non_stop_aware, support_vCont_t>: New
fields.
(remote_async_inferior_event_token)
(remote_async_get_pending_events_token): New.
(notice_new_inferiors): New, abstracted out from record_currthread.
(record_currthread): Call it.
(remote_threads_info): Default threads to running in non-stop
mode. In non-stop mode, only qfThreadInfo is supported.
(remote_close): Discard all pending stop_replies. Close the event
sources.
(set_stop_requested_callback): New.
(remote_start_remote): Implement non-stop mode startup. In
all-stop, don't clear the thread list here.
(remote_non_stop_feature): New.
(remote_protocol_features): Add a "QNonStop" feature.
(remote_open_1): Clear cached_wait_status and non_stop_aware.
Clear the thread list here.
(remote_detach_1): Discard pending stop replies of the process we
detached from.
(extended_remote_attach_1): Implement non-stop mode.
(remote_vcont_probe): Recognize `vCont;t'.
(remote_vcont_resume): Implement non-stop mode.
(remote_resume): Don't set waiting_for_stop_reply in non-stop
mode.
(remote_stop_ns): New.
(remote_stop): Rename to ...
(remote_stop_as): ... this. If we have a cached wait status,
don't bother interrupting the remote.
(remote_stop): Reimplement as wrapper around remote_stop_as and
remote_stop_ns.
(interrupt_query): Don't query in async mode.
(struct cached_reg, cahed_reg_t): New.
(struct stop_reply): New.
(stop_reply_queue): New.
(stop_reply_xmalloc, stop_reply_xfree)
(discard_pending_stop_replies, do_stop_reply_xfree)
(queued_stop_reply, push_stop_reply, peek_stop_reply)
(remote_parse_stop_reply, remote_get_pending_stop_replies)
(process_stop_reply): New.
(remote_wait_ns): New.
(remote_wait_as): Use remote_parse_stop_reply. Invalidate the
notion of current general thread is a process exit was reported.
(remote_wait): Call remote_wait_ns in non-stop mode.
(handle_notification): New.
(putpkt_binary): Handle notifications. Don't care for
waiting_for_stop_reply in non-stop mode.
(getpkt_sane): Rename to ...
(getpkt_or_notif_sane_1): ... this. Add `expecting_notif'
argument. Handle it. Handle notifications.
(getpkt_sane): Reimplement as wrapper around getpkt_or_notif_sane_1.
(getpkt_or_notif_sane): New.
(select_new_thread_callback): Check for exited state instead of
comparing the ptid against minus_one_ptid.
(extended_remote_create_inferior_1): Query the remote about the
current thread.
(remote_supports_non_stop): New.
(init_remote_ops): Register it.
(remote_async_inferior_event_handler): New.
(remote_async_get_pending_events_handler): New.
* infcmd.c (proceed_thread_callback): Comment.
(proceed_after_attach_callback, proceed_after_attach): New.
(attach_command_post_wait): In background attach, resume all
threads, but only if they are unsignalled, and not explicitly
stopped. In foreground attach, in non-stop mode, make sure to
stop all threads of the just attached to process.
(attach_command): In non-stop mode: If doing a background attach,
stop at least one thread. If a foreground attach, stop all
threads.
|
|
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
|
|
(go_command): Adjust.
|
|
Target interface for reverse debugging.
* target.h (enum target_waitkind):
Add new wait event, TARGET_WAITKIND_NO_HISTORY.
(struct target_ops): New method to_can_execute_reverse.
(target_can_execute_reverse): New macro.
* target.c (update_current_target): Inherit to_can_execute_reverse.
Remote interface for reverse debugging.
* remote.c (remote_can_execute_reverse): New target method.
(remote_resume): Check for reverse exec direction, and send
appropriate command to target.
(remote_wait_as): Check target response for NO_HISTORY status.
Also check for empty reply (target doesn't understand "bs" or "bc).
(remote_vcont_resume): Jump out if attempting reverse execution.
Event handling interface for reverse debugging.
* infrun.c (execution_direction): New state variable.
(enum inferior_stop_reason): Add NO_HISTORY reason.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_HISTORY.
Handle stepping over a function call in reverse.
Handle stepping thru a line range in reverse.
Handle setting a step-resume breakpoint in reverse.
Handle stepping into a function in reverse.
Handle stepping between line ranges in reverse.
(print_stop_reason): Print reason for NO_HISTORY.
(step_into_function): Rename to handle_step_into_function.
(handle_step_into_function_backward): New function.
(set_exec_direction_func, show_exec_direction_func): New funcs.
(proceed): No need to singlestep over a breakpoint
when resuming in reverse.
* inferior.h (enum exec_direction_kind): New enum.
(execution_direction): Export new execution state variable.
* breakpoint.c (make_breakpoint_silent): New function.
* breakpoint.h (make_breakpoint_silent): Export.
* infcmd.c (finish_command): Check for reverse exec direction.
(finish_backward): New function, handle finish cmd in reverse.
User interface for reverse execution.
* Makefile.in (reverse.c): New file.
* reverse.c: New file. User interface for reverse execution.
|
|
* infcmd.c (attach_command_post_wait): Adjust.
(attach_command): Likewise.
* inferior.h (stop_soon): Delete.
(struct inferior): Add stop_soon member.
* infrun.c (stop_soon): Delete.
(clear_proceed_status, start_remote)
(fetch_inferior_event, handle_inferior_event): Adjust.
(signal_stop_state): Don't check stop_soon here. Check in callers
instead.
(save_inferior_status, restore_inferior_status): Adjust.
* linux-nat.c (linux_nat_resume, linux_nat_wait): Always pass
signals to common code if starting up the inferior.
* inferior.h (struct inferior_info): Added stop_soon member.
* inferior.c (add_inferior) Clear stop_soon.
* mips-tdep.c (heuristic_proc_start): Adjust.
* nto-procfs.c (procfs_create_inferior): Adjust.
* solib-irix.c (irix_solib_create_inferior_hook): Adjust.
* solib-osf.c (osf_solib_create_inferior_hook): Adjust.
* solib-sunos.c (sunos_solib_create_inferior_hook): Adjust.
* solib-svr4.c (svr4_solib_create_inferior_hook): Adjust.
* win32-nat.c (do_initial_win32_stuff): Adjust.
* alpha-tdep.c (alpha_heuristic_proc_start): Adjust.
|
|
directly instead of calling wait_for_inferior / resume.
* infcmd.c (kill_if_already_running): Do not call no_shared_libraries
or init_wait_for_inferior.
(run_command_1): Call init_wait_for_inferior.
|
|
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
|
|
continuations.
* gdbthread.h (struct thread_info): Add comments around
continuations and intermediate_continuations.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments.
* infrun.c (fetch_inferior_event): Only call normal_stop if
stop_soon is NO_STOP_QUIETLY.
(context_switch): Don't context-switch the continuations.
* thread.c (clear_thread_inferior_resources): Discard all
continuations of the thread we're clearing.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments, and the code referencing
them.
* utils.c: Include "gdbthread.h".
(cmd_continuation, intermediate_continuation): Delete.
(add_continuation): Add thread_info* argument. Install the
continuation on it.
(restore_thread_cleanup): New.
(do_all_continuations_ptid, do_all_continuations_thread_callback):
New.
(do_all_continuations): Reimplement.
(discard_all_continuations_thread_callback,
discard_all_continuations_thread): New.
(discard_all_continuations): Reimplement.
(add_intermediate_continuation): Add thread_info* argument.
Install the continuation on it.
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread): New.
(do_all_intermediate_continuations): Reimplement.
(discard_all_intermediate_continuations_thread_callback): New.
(discard_all_intermediate_continuations_thread): New.
(discard_all_intermediate_continuations): Reimplement.
* breakpoint.c (until_break_command): Install the continuation on
the current thread.
* defs.h (cmd_continuation, intermediate_continuation): Delete.
(struct thread_info): Forward declare.
(add_continuation, add_intermediate_continuation): Add
thread_info* argument.
(do_all_continuations_thread, discard_all_continuations_thread)
(do_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations_thread): Declare.
* inf-loop.c (inferior_event_handler): In non-stop only run
continuations on the thread that stopped. In all-stop, run
continuations on all threads.
* infcmd.c (step_once, finish_command): Adjust.
|
|
stop_step.
* inferior.h (stop_step): Delete.
* gdbthread.h (struct thread_info): Add comments to stop_step.
(save_infrun_state, load_infrun_state): Remove stop_step argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_step argument, and references to it.
* infrun.c (clear_proceed_status): Clear stop_step.
(fetch_inferior_event): Adjust.
(context_switch): Don't context-switch stop_step.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* infcmd.c (stop_step): Delete.
(step_1, step_1_continuation, step_once, until_next_command):
Adjust.
|
|
step_multi.
* inferior.h (step_multi): Delete.
* gdbthread.h (struct thread_info): Add comments around
step_multi.
(save_infrun_state, load_infrun_state): Remove step_multi
parameter.
* thread.c (load_infrun_state, save_infrun_state): Remove
step_multi argument, and references to it.
* infcmd.c (step_multi): Delete.
(step_1): Adjust.
(step_1_continuation, until_next_command): Adjust.
* infrun.c (fetch_inferior_event): Adjust.
(context_switch): Don't context-switch step_multi.
(print_stop_reason, normal_stop): Adjust.
|
|
stop_signal.
* inferior.h (stop_signal): Delete.
* gdbthread.h (save_infrun_state, load_infrun_state): Remove
stop_signal argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_signal argument. Don't reference it.
* infcmd.c (stop_signal): Delete.
(program_info): Adjust.
* infrun.c (resume): Clear stop_signal.
(proceed): Adjust. Pass the last stop_signal to the thread we're
resuming.
(context_switch): Don't context-switch stop_signal.
(handle_inferior_event, keep_going): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* fbsd-nat.c: Include "gdbthread.h".
(find_signalled_thread, find_stop_signal): New.
(fbsd_make_corefile_notes): Use it.
* fork-child.c (startup_inferior): Adjust.
* linux-nat.c (get_pending_status): Adjust.
(linux_nat_do_thread_registers): Adjust.
(find_signalled_thread, find_stop_signal): New.
(linux_nat_do_thread_registers): Add stop_signal parameter.
(struct linux_nat_corefile_thread_data): Add stop_signal member.
(linux_nat_corefile_thread_callback): Pass stop_signal.
(linux_nat_do_registers): Delete.
(linux_nat_make_corefile_notes): Use find_stop_signal. Assume
there's always a thread.
* procfs.c (find_signalled_thread, find_stop_signal): New.
(find_stop_signal): New.
(procfs_do_thread_registers): Add stop_signal parameter.
(struct procfs_corefile_thread_data): Add stop_signal member.
(procfs_corefile_thread_callback): Pass args->stop_signal.
(procfs_make_note_section): Find the last stop_signal.
* solib-irix.c: Include gdbthread.h.
(irix_solib_create_inferior_hook): Adjust.
* solib-osf.c: Include gdbthread.h.
(osf_solib_create_inferior_hook): Adjust.
* solib-sunos.c: Include gdbthread.h.
(sunos_solib_create_inferior_hook): Adjust.
* solib-svr4.c: Include gdbthread.h.
(svr4_solib_create_inferior_hook): Adjust.
* win32-nat.c (do_initial_win32_stuff): Adjust.
|
|
proceed_to_finish.
(save_infrun_state, load_infrun_state): Remove proceed_to_finish
argument.
* thread.c (load_infrun_state, save_infrun_state): Delete
proceed_to_finish argument and references to it.
* infcall.c (call_function_by_hand): Adjust.
* infcmd.c (finish_command): Adjust.
* infrun.c (proceed_to_finish): Delete.
(clear_proceed_status): Adjust.
(context_switch): Don't context-switch proceed_to_finish.
(normal_stop, save_inferior_status, restore_inferior_status):
Adjust.
|
|
* breakpoint.h (bpstat_do_actions): Remove bpstat* argument.
* breakpoint.c (bpstat_do_actions): Rename to ...
(bpstat_do_actions_1): ... this. Make static. Change return type
to int. Return true if a breakpoint proceeded.
(bpstat_do_actions): New, as wrapper around bpstat_do_actions_1.
(delete_breakpoint): Don't reference the global stop_bpstat; it's
gone.
* gdbthread.h (struct thread_info): Add stop_bpstat.
(save_infrun_state, load_infrun_state): Remove stop_bpstat
argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_bpstat argument, and the code referencing it.
* infcall.c: Include "gdbthread.h".
(call_function_by_hand): Adjust.
* exceptions.c: Include "gdbthread.h".
(throw_exception): Adjust.
* infcmd.c (stop_bpstat): Delete.
(continue_command): In all-stop, set the ignore count on the
thread that reported the stop. In non-stop, set it on the current
thread.
(finish_command_continuation): Adjust.
(program_info): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch stop_bpstat.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* inf-loop.c (inferior_event_handler): Remove parameter to
bpstat_do_actions call.
* top.c (command_loop): Remove parameter to bpstat_do_actions
call. Call it unconditionally.
* event-top.c (command_handler): Ditto.
* python/python.c (execute_gdb_command): Ditto.
|
|
* gdbthread.h (save_infrun_state, load_infrun_state): Remove
step_over_calls argument.
* thread.c (save_infrun_state, load_infrun_state): Remove
step_over_calls argument. Adjust.
* infcmd.c (step_over_calls): Delete.
(step_1): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch step_over_calls.
(handle_inferior_event, save_inferior_status)
(restore_inferior_status): Adjust.
|
|
directly.
* infrun.c (stepping_over_breakpoint, step_resume_breakpoint):
Delete.
(struct thread_stepping_state): Delete.
(gtss, tss): Delete.
(follow_inferior_reset_breakpoints, follow_exec)
(resume, clear_proceed_status): Adjust.
(prev_pc): Delete.
(proceed, start_remote, init_wait_for_inferior): Adjust.
(struct execution_control_state): Add event_thread member.
(delete_step_resume_breakpoint_callback)
(delete_step_thread_step_resume_breakpoint)
(delete_step_thread_step_resume_breakpoint_cleanup)
(delete_step_thread_step_resume_breakpoint): New.
(wait_for_inferior, init_execution_control_state): Use
delete_step_thread_step_resume_breakpoint_cleanup.
(wait_for_inferior): Set the event_thread.
(fetch_inferior_event): Ditto. Delete the step-resume breakpoint
with delete_step_thread_step_resume_breakpoint.
(init_thread_stepping_state): Change parameter type to
thread_info. Adjust.
(context_switch): Don't context switch prev_pc,
stepping_over_breakpoint, step_resume_breakpoint,
step_range_start, step_range_end, step_frame_id,
tss->stepping_over_breakpoint,
tss->stepping_through_solib_after_catch,
tss->stepping_through_solib_catchpoints, tss->current_line, or
tss->current_symtab.
(adjust_pc_after_break, handle_inferior_event)
(currently_stepping, step_into_function)
(insert_step_resume_breakpoint_at_sal)
(insert_longjmp_resume_breakpoint, keep_going): Adjust.
(clear_stepping_state): New.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* gdbthread.h (struct thread_info): Comments describing the
members moved here. Add step_after_step_resume_breakpoint.
(delete_step_resume_breakpoint): Add thread_info argument.
(save_infrun_state, load_infrun_state): Remove prev_pc,
trap_expected, step_resume_breakpoint, step_range_start,
step_range_end, step_frame_id, another_trap,
stepping_through_solib_after_catch,
stepping_through_solib_catchpoints, current_line and
current_symtab function arguments.
(inferior_thread): Declare.
* thread.c (inferior_thread): New.
(delete_step_resume_breakpoint): Add a thread_info parameter and
rewrite.
(load_infrun_state, save_infrun_state): Remove prev_pc,
trap_expected, step_resume_breakpoint, step_range_start,
step_range_end, step_frame_id, stepping_over_breakpoint,
stepping_through_solib_after_catch,
stepping_through_solib_catchpoints, current_line and
current_symtab args. Remove code referencing them.
* infcmd.c (step_range_start, step_range_end, step_frame_id):
Delete.
(step_1, step_once, until_next_command): Adjust.
* inferior.h (step_range_start, step_range_end, step_frame_id):
Delete.
* linux-nat.c (linux_child_follow_fork): If following the child,
move the step state to it. Adjust.
* inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
|
|
member to "struct obj_section *".
* tracepoint.h (struct tracepoint): Likewise.
* symtab.h (struct general_symbol_info): Replace bfd_section
member with obj_section.
(struct symtab_and_line): Change type of section member to
"struct obj_section *".
(SYMBOL_BFD_SECTION): Remove macro, replace by ...
(SYMBOL_OBJ_SECTION): ... this.
* minsym.c (prim_record_minimal_symbol_and_info): Record symbol
section as obj_section instead of bfd_section.
* ada-lang.c (ada_decode_symbol): Use gsymbol->obj_section
directly instead of looking of obj_section from bfd_section.
* objfiles.h (find_pc_sect_section): Remove.
* objfiles.c (find_pc_sect_section): Remove.
(find_pc_section): Inline find_pc_sect_section code.
* symfile.h (find_pc_overlay): Return struct obj_section *.
(find_pc_mapped_section): Likewise.
(section_is_overlay, section_is_mapped): Change type of section
argument to struct obj_section *.
(pc_in_mapped_range, pc_in_unmapped_range): Likewise.
(overlay_mapped_address, overlay_unmapped_address): Likewise.
(symbol_overlayed_address): Likewise.
* symtab.h (symbol_overlayed_address): Likewise.
* symfile.c (overlay_is_mapped): Remove.
(section_is_mapped): Inline overlay_is_mapped code. Update.
(overlay_invalidate_all): Update.
(section_is_overlay): Change section argument to type
"struct obj_section *". Use bfd_ methods.
(pc_in_unmapped_range): Likewise. Handle relocated sections.
(pc_in_mapped_range): Likewise. Handle relocated sections.
(sections_overlap): Likewise.
(overlay_unmapped_address): Likewise.
(overlay_mapped_address): Likewise.
(symbol_overlayed_address): Likewise.
(find_pc_overlay): Return struct obj_section *.
(find_pc_mapped_section): Likewise.
(list_overlays_command): Update.
(map_overlay_command, unmap_overlay_command): Update.
(simple_overlay_update): Update.
* block.h (blockvector_for_pc_sect): Change section argument
to type "struct obj_section *".
(block_for_pc_sect): Likewise.
* block.c (blockvector_for_pc_sect): Change section argument
to type "struct obj_section *".
(block_for_pc_sect): Likewise.
* symtab.h (find_pc_sect_function, find_pc_sect_psymtab,
find_pc_sect_symtab, find_pc_sect_psymbol, find_pc_sect_line,
lookup_minimal_symbol_by_pc_section, find_function_start_pc): Likewise.
(matching_bfd_sections): Rename to ...
(matching_obj_sections): ... this. Update argument types.
* blockframe.c (find_pc_sect_function): Likewise.
* breakpoint.c (describe_other_breakpoints): Likewise.
(breakpoint_has_pc, check_duplicates_for): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Likewise.
(lookup_minimal_symbol_by_pc_section): Likewise.
* symtab.c (find_pc_sect_psymtab_closer): Likewise.
(find_pc_sect_psymtab, find_pc_sect_psymbol, find_pc_sect_symtab,
find_pc_sect_line, find_function_start_pc): Likewise.
(matching_bfd_sections): Rename to ...
(matching_obj_sections): ... this. Update argument types.
* blockframe.c (find_pc_partial_function): Update to section
type changes. No longer call find_pc_sect_section.
(cache_pc_function_section): Change to type "struct obj_section *".
* breakpoint.c (resolve_sal_pc): Update to section type changes.
* exec.c (xfer_memory): Likewise.
* findvar.c (read_var_value): Likewise.
* infcmd.c (jump_command): Likewise.
* linespec.c (minsym_found): Likewise.
* maint.c (maintenance_translate_address): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Likewise.
(lookup_solib_trampoline_symbol_by_pc): Likewise.
* parse.c (write_exp_msymbol): Likewise.
* printcmd.c (build_address_symbolic): Likewise.
(address_info, sym_info): Likewise.
* symmisc.c (dump_msymbols, print_symbol): Likewise.
* symtab.c (fixup_section): Likewise.
(fixup_symbol_section, fixup_psymbol_section): Likewise.
(find_pc_line, find_function_start_sal): Likewise.
* target.c (memory_xfer_partial): Likewise.
* hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline): Likewise.
* spu-tdep.c (spu_overlay_update): Likewise.
|
|
(frame_map_name_to_regnum): Remove prototype.
* frame.c (frame_map_regnum_to_name): Remove.
(frame_map_name_to_regnum): Remove.
(frame_unwind_register_value): Use user_reg_map_regnum_to_name
instead of frame_map_regnum_to_name.
* ax-gdb.c: Include "user-regs.h".
(gen_expr): Use user_reg_map_name_to_regnum instead of
frame_map_name_to_regnum.
* eval.c: Include "user-regs.h".
(evaluate_subexp_standard): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* infcmd.c (registers_info): Likewise.
* parse.c: Include "user-regs.h".
(write_dollar_variable): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* tracepoint.c: Include "user-regs.h".
(encode_actions): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* valops.c: Include "user-regs.h".
(value_fetch_lazy): Use user_reg_map_regnum_to_name instead
of frame_map_regnum_to_name.
|
|
* infcmd.c (run_command_1, attach_command): If non-stop mode
is requested, verify the target supports it.
* linux-nat.c (linux_nat_supports_non_stop): New.
(linux_nat_add_target): Register the above.
* target.c (find_default_supports_non_stop)
(target_supports_non_stop): New.
(init_dummy_target): Register find_default_supports_non_stop.
* target.h (struct target_ops): New field to_supports_non_stop.
(target_supports_non_stop): New.
|
|
|
|
(target_pre_inferior): Call no_shared_libraries.
* infcmd.c (run_command_1): Do not call objfile_purge_solibs
or clear_solib.
(attach_command): Do not call clear_solib.
|
|
* cli/cli-decode.h (CMD_ASYNC_OK, set_cmd_async_ok)
(get_cmd_async_ok): Remove.
* cli/cli-decode.c (set_cmd_async_ok, get_cmd_async_ok): Remove.
* cli/cli-cmds.c (init_cli_cmds): Don't use set_cmd_async_ok.
* infcmd.c (_initialize_infcmd): Likewise.
* thread.c (_initialize_thread): Likewise.
|
|
Rewrite continuations internals on top of cleanups and plug
continuation arguments leaks.
* defs.h (struct continuation): Make it opaque.
(add_continuation, add_intermediate_continuation): Drop the int
argument of the continuation hook argument. Add
continuation_free_args argument.
(do_all_continuations, do_all_intermediate_continuations): Drop
the error_p argument.
* utils.c (add_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_continuations): Drop error argument. Reimplement on top
of cleanups.
(discard_all_continuations): Reimplement on top of cleanups.
(add_intermediate_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_intermediate_continuations): Drop error argument.
Reimplement on top of cleanups.
(discard_all_intermediate_continuations): Reimplement on top of
cleanups.
* breakpoint.c (until_break_command_continuation): Drop error
argument. Add xfree as continuation argument deleter.
* inf-loop.c (inferior_event_handler): On error, discard all
continuations. Adjust to new do_all_intermediate_continuations
and do_all_continuations interfaces.
* infcmd.c (step_1_continuation): Drop error_p argument. Adjust.
Pass xfree as continuation argument deleter.
(finish_command_continuation): Drop error_p argument. Adjust.
(finish_command_continuation_free_arg): New.
(finish_command): Pass finish_command_continuation_free_arg as
continuation argument deleter. Adjust to new do_all_continuations
interfaces.
(attach_command_continuation): Drop error_p argument.
(attach_command_continuation_free_args): New.
(attach_command): Pass attach_command_continuation_free_args as
continuation argument deleter.
* interps.c (interp_set): Adjust to new do_all_continuations
interfaces.
* event-top.c (stdin_event_handler): In error, also discard the
intermediate continuations.
|
|
* top.c (execute_command): Remove unused arg1 and arg2 locals.
* breakpoint.c (struct until_break_command_continuation_args):
New.
(until_break_command_continuation): Take a void* instead of a
continuations_arg. Adjust.
(until_break_command): Adjust to use struct
until_break_command_continuation_args instead of struct
continuation_arg.
* infcmd.c (struct step_1_continuation_args): New.
(step_1_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct step_1_continuation_args.
(step_once): Adjust to use struct step_1_continuation_args.
(struct finish_command_continuation_args): New.
(finish_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
finish_command_continuation_args.
(finish_command): Adjust to use struct
finish_command_continuation_args.
(struct attach_command_continuation_args): New.
(attach_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
attach_command_continuation_args.
(attach_command): Adjust to use struct
attach_command_continuation_args.
* defs.h (struct continuation_arg): Delete.
(struct continuation): Replace the struct continuation_arg*
parameter of continuation_hook by a void*. Replace "arg_list"
member by a new "args" member with void* type.
(add_continuation, add_intermediate_continuation): Replace struct
continuation_arg type usages by void* usages.
* utils.c (add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Replace struct
continuation_arg type usages by void* usages. Pass "args" instead
of "arg_list".
|
|
* infcmd.c (continue_1): New, extracted from
(continue_command): ...here.
(interrupt_target_1): New, extracted from
(interrupt_target_command): ...here.
* inferior.h (continue_1, interrupt_target_1): New.
* mi/mi-main.c (mi_cmd_exec_continue)
(mi_cmd_exec_interrupt): Handle --all.
|
|
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
|
|
* infcmd.c (proceed_thread_callback, do_context_switch_to): New.
(continue_command): Add "-a" option.
(interrupt_target_command): Add "-a" option.
(_initialize_infcmd): Add extend help of continue and interrupt
command to mention the new "-a" option. Mark "continue" async ok.
|
|
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
|
|
* config/i386/nm-i386gnu.h (ATTACH_NO_WAIT): Delete.
* target.h (struct target_ops): Add to_attach_no_wait member.
(target_attach_no_wait): New.
* target.c (update_current_target): Inherit to_attach_no_wait.
* infcmd.c: Replace ATTACH_NO_WAIT compile time check by
target_attach_no_wait runtime check.
* gnu-nat.c (init_gnu_ops): Set to_attach_no_wait in gnu_ops.
* win32-nat.c (init_win32_ops): Set to_attach_no_wait in
win32_ops.
|
|
* infcall.c (call_function_by_hand): Set both
suppress_resume_observer and suppress_stop_observer.
* infcmd.c (suppress_run_stop_observers): Split into...
(suppress_resume_observer, suppress_stop_observer): ...those.
(finish_command_continuation): Clear suppress_stop_observer.
(finish_command): Set suppress_stop_observer.
* inferior.h (suppress_run_stop_observers): Split into...
(suppress_resume_observer, suppress_stop_observer): ...those.
* infrun.c (normal_stop): Check for suppress_stop_observer.
* thread.c (set_running): Check for suppress_resume_observer.
|
|
* Makefile.in: Update dependencies.
* gdbthread.h (struct thread_info): New field
running_.
(set_running, is_running): New.
* thread.c (set_running, is_running): New.
* inferior.h (suppress_normal_stop_observer): Rename to...
(suppress_run_stop_observers): ..this.
* infcmd.c (suppress_normal_stop_observer): Rename to...
(suppress_run_stop_observers): ..this.
(finish_command_continuation, finish_command): Adjust.
* infcall.c (call_function_by_hand): Adjust.
* infrun.c (normal_stop): Call set_running.
* target.c (target_resume): New. Call set_running.
* target.h (target_resume): Convert from macro to
a function.
* mi/mi-interp.c (mi_on_resume): New.
(mi_interpreter_init): Register mi_on_resume.
|
|
* mi/mi-interp.c (mi_on_normal_stop): New.
(mi_interpreter_init): Register mi_on_normal_stop.
(mi_interpreter_exec_continuation): Remove.
(mi_cmd_interpreter_exec): Don't register the above.
* mi/mi-main.c (captured_mi_execute_command): Don't care
about sync_execution.
(mi_execute_async_cli_command): Don't install continuation. Don't
print *stopped.
(mi_exec_async_cli_cmd_continuation): Remove.
|
|
* inferior.h (suppress_normal_stop_observer): New.
* infcall.c (call_function_by_hand): Disable stop events when
doing function calls.
* infmcd.c (suppress_normal_stop_observer): New.
(finish_command_continuation): Call normal_stop observer
explicitly.
(finish_command): Disable stop events inside proceed.
* infrun.c (normal_stop): Don't call normal stop observer if
suppressed of if multi-step is in progress.
|
|
* infrun.c (finish_command): Don't pass cleanup
to continuation.
(finish_command_continuation): Don't grab cleanup from
the passed data, as we don't use, and cannot, use it anyway.
|
|
|
|
instead of using the current_language. Update calls to val_print
throughout.
(common_val_print): Add new langauge parameter and pass it to
val_print.
* value.h (struct language_defn): Add opaque declaration.
(val_print, common_val_print): Update declarations.
* stack.c (print_frame_args): Update call to common_val_print
using the appropriate language.
* mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
* c-valprint, f-valprint.c, m2-valprint.c, mt-tdep.c, infcmd.c,
mi/mi-main.c, jv-valprint.c, ada-valprint.c, varobj.c, p-valprint.c,
scm-valprint.c, cp-valprint.c, sh64-tdep.c, printcmd.c:
#include "language.h" if necessary.
Update calls to val_print and common_val_print.
* Makefile.in (mt-tdep.o, sh64-tdep.o, mi-cmds.o, mi-main.o):
Update dependencies.
|
|
NULL dereferencing.
|
|
* breakpoint.c (update_breakpoints_after_exec): Delete bp_longjmp
and bp_longjmp_resume breakpoints.
(breakpoint_address_is_meaningful): Claim bp_longjmp_resume as
meaningful.
(create_longjmp_breakpoint): Don't create bp_longjmp_resume
breakpoints. Create bp_longjmp breakpoints as momentary
breakpoints.
(enable_longjmp_breakpoint): Delete.
(set_longjmp_breakpoint): New.
(disable_longjmp_breakpoint): Delete.
(delete_longjmp_breakpoint): New.
(set_longjmp_resume_breakpoint): Delete.
(set_momentary_breakpoint_at_pc): New.
(breakpoint_re_set_one): Don't delete bp_longjmp and
bp_longjmp_resume breakpoints.
(breakpoint_re_set): Don't create longjmp and longjmp-resume
breakpoints.
* infrun.c (step_resume_breakpoint): Add comment.
(struct execution_control_state): Delete handling_longjmp member.
(init_execution_control_state). Don't clear handling_longjmp.
(context_switch): Don't context switch handling_longjmp.
(handle_inferior_event): If handling a bp_longjmp breakpoint,
create a bp_longjmp_resume breakpoint, and set it as current
step_resume_breakpoint, then step over the longjmp breakpoint. If
handling a bp_longjmp_resume breakpoint, don't delete the longjmp
breakpoint, delete the longjmp-resume breakpoint, and stop
stepping.
(currently_stepping): Remove handling_longjmp from expression.
(insert_step_resume_breakpoint_at_sal): Update comment.
(insert_longjmp_resume_breakpoint): New.
* breakpoint.h (set_momentary_breakpoint_at_pc): Declare.
(enable_longjmp_breakpoint, disable_longjmp_breakpoint): Delete
declarations.
(set_longjmp_breakpoint, delete_longjmp_breakpoint): Declare.
(set_longjmp_resume_breakpoint): Delete declaration.
* gdbthread.h (save_infrun_state): Remove handling_longjmp
parameter.
(load_infrun_state): Delete *handling_longjmp parameter.
* thread.c (save_infrun_state): Remove handling_longjmp parameter.
Update body.
(load_infrun_state): Delete *handling_longjmp parameter. Update
body.
* infcmd.c (disable_longjmp_breakpoint_cleanup): Delete.
(delete_longjmp_breakpoint_cleanup): New.
(step_1): Call set_longjmp_breakpoint instead of
enable_longjmp_breakpoint. Use delete_longjmp_breakpoint_cleanup
instead of disable_longjmp_breakpoint_cleanup when making cleanup.
(step_1_continuation): Pass thread id in the continuation args to
step_once.
(step_once): Add thread parameter. Pass thread id the the
continuation.
gdb/testsuite/
* gdb.cp/annota2.exp: Adjust to breakpoints invalidations at
different times.
|
|
Pedro Alves <pedro@codesourcery.com>
Based on work by Jan Kratochvil <jan.kratochvil@redhat.com> and Jeff
Johnston <jjohnstn@redhat.com>.
* NEWS: Mention attach to stopped process fix.
* infcmd.c (detach_command, disconnect_command): Discard the thread
list.
* infrun.c (handle_inferior_event): Do not ignore non-SIGSTOP while
attaching. Use signal_stop_state.
(signal_stop_state): Check stop_soon.
* linux-nat.c (kill_lwp): Declare earlier.
(pid_is_stopped, linux_nat_post_attach_wait): New.
(lin_lwp_attach_lwp): Use linux_nat_post_attach_wait. Update
comments.
(linux_nat_attach): Use linux_nat_post_attach_wait.
(detach_callback, linux_nat_detach): Improve handling for signalled
processes.
(linux_nat_pid_to_str): Always print out the LWP ID if it differs
from the process ID.
* Makefile.in (infcmd.o): Update.
2008-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.threads/attach-into-signal.c, gdb.threads/attach-into-signal.exp,
gdb.threads/attach-stopped.c, gdb.threads/attach-stopped.exp,
gdb.threads/attachstop-mt.c, gdb.threads/attachstop-mt.exp: New.
|
|
breakpoint if we're not going to do another step.
|
