| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* monitor.c (monitor_debug): Change remotedebug to buffer strings.
* monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
epecting prompt and echo during open.
* monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to
determine if break should be sent as stop command.
* monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
* i960-tdep.c (mon960_frame_chain_valid): New function for getting
stack frame on mon960.
* Makefile.in: Add mon960 files.
* configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
added i960-nindy-coff* and i960-nindy-elf* for target nindy.
* configure: Regenerated.
* config/i960/mon960.mt, config/i960/tm-mon960.h: New files;
support mon960 rom monitor on i960.
|
|
match return val of cplus_mangle_name.
* i960-tdep.c: Change arg types of next_insn to match callers.
|
|
|
|
* a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
* gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
had been -pinsn.c files.
* Makefile.in (ALLDEPFILES): Remove removed files.
(a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
Remove compile actions.
* arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
vax-tdep.o: Add compile actions.
* defs.h (tm_print_insn): New global.
* a29k-tdep.c (gdb_print_insn_a29k): New function.
(_initialize_a29k_tdep): Rename from _initialize_29k,
set tm_print_insn.
* alpha-tdep.c (print_insn): Remove.
(_initialize_alpha_tdep): Set tm_print_insn.
* arm-tdep.c (arm_print_insn): New function, was print_insn
in arm-pinsn.c.
* convex-tdep.c (convex_print_insn): New function, was print_insn
in convex-pinsn.c.
* h8300-tdep.c (print_insn): Remove.
(gdb_print_insn_h8300): New function.
(_initialize_h8300_tdep): New function.
* h8500-tdep.c (print_insn): Remove.
(_initialize_h8500_tdep): New function.
* hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
* i386-tdep.c (_initialize_i386_tdep): New function.
* i960-tdep.c (mem, next_insn): New functions, were in
i960-pinsn.c.
(_initialize_i960_tdep): Set tm_print_insn.
* m68k-tdep.c (_initialize_m68k_tdep): New function.
* m88k-tdep.c (_initialize_m88k_tdep): New function.
* mips-tdep.c (gdb_print_insn_mips): New function.
(_initialize_mips_tdep): Set tm_print_insn.
* pyr-tdep.c (pyr_print_insn): New function, was print_insn
in pyr-pinsn.c.
* rs6000-tdep.c (_initialize_rs6000_tdep): New function.
* sh-tdep.c (print_insn): Remove.
(gdb_print_insn_sh): New function.
(_initialize_sh_tdep): Set tm_print_insn.
* sparc-tdep.c (_initialize_sparc_tdep): New function.
* w65-tdep.c (print_insn): Remove.
(_initialize_w65_tdep): New function.
* z8k-tdep.c (print_insn): Remove.
(gdb_print_insn_z8k): New function.
(_initialize_z8k_tdep): Set tm_print_insn.
* printcmd.c (print_insn): New function, generic disassembler.
* config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
* defs.h (query_hook, error_hook): Fix prototypes.
|
|
and CORE_ADDR, respectively.
* frame.h (FRAME, FRAME_INFO_ID, FRAME_ADDR): Remove.
* blockframe.c (get_frame_info): Remove.
* a29k-tdep.c, alpha-tdep.c, blockframe.c, breakpoint.c,
breakpoint.h, energize.c, findvar.c, gdbtk.c, gould-pinsn.c,
h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, i386-tdep.c, i960-tdep.c,
infcmd.c, inferior.h, infrun.c, m68k-tdep.c, m88k-tdep.c,
mips-tdep.c, nindy-tdep.c, printcmd.c, pyr-tdep.c, rs6000-tdep.c,
sh-tdep.c, sparc-tdep.c, stack.c, valops.c, z8k-tdep.c,
config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/gould/tm-pn.h, config/h8300/tm-h8300.h,
config/h8500/tm-h8500.h, config/mips/tm-mips.h,
config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h,
config/pyr/tm-pyr.h, config/sparc/tm-sparc.h): Replace FRAME with
struct frame_info * everywhere, replace FRAME_ADDR with CORE_ADDR,
rename variables consistently (using `frame' or `fi'), remove
calls to get_frame_info and FRAME_INFO_ID, remove comments about
FRAME and FRAME_ADDR cruftiness.
|
|
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
|
|
|
|
i386m3-nat.c, config/m68k/tm-m68k.h, i960-tdep.c
config/i960/tm-i960.h, remote-nindy.c, config/m88k/tm-m88k.h,
m88k-tdep.c: Use floatformat.h instead of ieee-float.h.
* sparc-tdep.c: Remove now-obsolete ieee-float.h stuff
* findvar.c: Update comment regarding ieee-float.h.
|
|
for operation fault, constraint fault, and type fault.
|
|
|
|
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
|
|
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
|
|
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
|
|
|
|
|
|
from a configuration file (typically including <limits.h>), or to
TARGET_CHAR_BIT if CHAR_BIT is not defined.
* eval.c (evaluate_subexp): Use new BYTES_TO_EXP_ELEM macro.
* eval.c (evaluate_subexp): Add case for OP_BITSTRING.
* expprint.c (print_subexp): Use new BYTES_TO_EXP_ELEM macro.
* exppritn.c (print_subexp, dump_expression): Add case for
OP_BITSTRING.
* expression.h (OP_BITSTRING): New expression element type for
packed bitstrings.
* expression.h (EXP_ELEM_TO_BYTES, BYTES_TO_EXP_ELEM): New
macros to convert between number of expression elements and bytes
to store that many elements.
* i960-tdep.c (leafproc_return): Use new macros to access
minimal symbol name and address fields.
* m88k-pinsn.c (sprint_address): Use new macros to access
minimal symbol name and address fields.
* nindy-tdep.c (nindy_frame_chain_valid): Use new macro to access
minimal symbol address field.
* parse.c (write_exp_elt, write_exp_string, prefixify_expression,
parse_exp_1): Use new EXP_ELEM_TO_BYTES macro.
* parse.c (write_exp_string, length_of_subexp, prefixify_expression):
Use new BYTES_TO_EXP_ELEM macro.
* parse.c (write_exp_bitstring): New function to write packed
bitstrings into the expression element vector.
* parse.c (length_of_subexp, prefixify_subexp): Add case for
OP_BITSTRING.
* parser-defs.h (struct stoken): Document that it is used for
OP_BITSTRING as well as OP_STRING.
* parser-defs.h (write_exp_bitstring): Add prototype.
**** start-sanitize-chill ****
* ch-exp.y (BIT_STRING_LITERAL): Change token type to sval.
* ch-exp.y (NUM, PRED, SUCC, ABS, CARD, MAX, MIN, SIZE, UPPER,
LOWER, LENGTH): New tokens for keywords.
* ch-exp.y (chill_value_built_in_routine_call, mode_argument,
upper_lower_argument, length_argument, array_mode_name,
string_mode_name, variant_structure_mode_name): New non-terminals
and productions.
* ch-exp.y (literal): Useful production for BIT_STRING_LITERAL.
* ch-exp.y (match_bitstring_literal): New lexer support function
to recognize bitstring literals.
* ch-exp.y (tokentab6): New token table for 6 character keywords.
* ch-exp.y (tokentab5): Add LOWER, UPPER.
* ch-exp.y (tokentab4): Add PRED, SUCC, CARD, SIZE.
* ch-exp.y (tokentab3): Add NUM, ABS, MIN, MAX.
* ch-exp.y (yylex): Check tokentab6.
* ch-exp.y (yylex): Call match_bitstring_literal.
**** end-sanitize-chill ****
|
|
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
|
|
|
|
libiberty/strsignal.c. Widespread changes to use libiberty/strerror.c
functions for errno manipulations and libiberty/strsignal.c for signo
(signals) manipulations.
|
|
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
|
|
will make ChangeLog entries for all of them.
|
|
* param-no-tm.h: Change users to define TM_FILE_OVERRIDE instead.
* param.h, param-no-tm.h: Removed.
* Update copyrights in all changed files.
* dbxread.c, dwarfread.c, inflow.c, infrun.c, m2-exp.y, putenv.c,
solib.c, symtab.h, tm-umax.h, valprint.c: Lint.
* tm-convex.h, tm-hp300hpux.h, tm-merlin.h, tm-sparc.h,
xm-merlin.h: Avoid host include files in target descriptions.
* getpagesize.h: Removed, libiberty copes now.
|
|
|
|
|
|
|
