aboutsummaryrefslogtreecommitdiff
path: root/gdb/i386-tdep.h
AgeCommit message (Collapse)AuthorFilesLines
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-09-30X86: Migrate from 'regset_from_core_section' to 'iterate_over_regset_sections'Andreas Arnez1-6/+6
For all I386 and AMD64 targets, replace all occurrences of regset_from_core_section by the iterator method. gdb/ChangeLog: * amd64obsd-tdep.c (amd64obsd_regset_from_core_section): Remove. (amd64obsd_iterate_over_regset_sections): New. (amd64obsd_core_init_abi): Adjust gdbarch initialization. * i386-cygwin-tdep.c (i386_windows_regset_from_core_section): Remove. (i386_cygwin_init_abi): Clear tdep->sizeof_fpregset. Drop regset_from_core_section initialization. * i386-tdep.c (i386_regset_from_core_section): Remove. (i386_iterate_over_regset_sections): New. (i386_gdbarch_init): Adjust gdbarch initialization. * i386-tdep.h (i386_regset_from_core_section): Remove prototype. (i386_iterate_over_regset_sections): New prototype. * i386obsd-tdep.c (i386obsd_aout_regset_from_core_section): Remove. (i386obsd_aout_iterate_over_regset_sections): New. (i386obsd_aout_init_abi): Adjust gdbarch initialization. * configure.tgt (gdb_target_obs): Add fbsd-tdep.o for all x86 FreeBSD targets. * amd64fbsd-tdep.c (fbsd-tdep.h): Include. (amd64fbsd_init_abi): Call fbsd_init_abi. * i386fbsd-tdep.c (fbsd-tdep.h): Include. (i386fbsd4_init_abi): Call fbsd_init_abi. * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): No longer set target method 'make_corefile_notes'. * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
2014-09-30Add 'regset' parameter to 'iterate_over_regset_sections_cb'Andreas Arnez1-0/+6
This adds the 'regset' parameter to the iterator callback. Consequently the 'regset_from_core_section' method is dropped for all targets that provide the iterator method. This change prepares for replacing regset_from_core_section everywhere, thereby eliminating one gdbarch interface. Since the iterator is usually no more complex than regset_from_core_section alone, targets that previously didn't define core_regset_sections will then gain multi-arch capable core file generation support without increased complexity. gdb/ChangeLog: * gdbarch.sh (iterate_over_regset_sections_cb): Add regset parameter. * gdbarch.h: Regenerate. * corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset iterator. (get_core_register_section): Add parameter 'regset' and use it, if set. Add parameter 'min_size' and verify the bfd section size against it. (get_core_registers_cb): Add parameter 'regset' and pass it to get_core_register section. For the "standard" register sections ".reg" and ".reg2", set an appropriate default for human_name. (get_core_registers): Don't abort when the gdbarch has an iterator but no regset_from_core_section. Add NULL/0 for parameters 'regset'/'min_size' in calls to get_core_register_section. * linux-tdep.c (linux_collect_regset_section_cb): Add parameter 'regset' and use it instead of calling the regset_from_core_section gdbarch method. * i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'. * i386-tdep.c (i386_supply_xstateregset) (i386_collect_xstateregset, i386_xstateregset): Moved to i386-linux-tdep.c. (i386_regset_from_core_section): Drop handling for .reg-xfp and .reg-xstate. (i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic core file support only if the regset iterator hasn't been set. * i386-linux-tdep.c (i386_linux_supply_xstateregset) (i386_linux_collect_xstateregset, i386_linux_xstateregset): New. Moved from i386-tdep.c and renamed to *_linux*. (i386_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. Allow any .reg-xstate size when reading from a core file. * amd64-tdep.c (amd64_supply_xstateregset) (amd64_collect_xstateregset, amd64_xstateregset): Moved to amd64-linux-tdep.c. (amd64_regset_from_core_section): Remove. (amd64_init_abi): Set new tdep field 'fpregset'. No longer install an amd64-specific regset_from_core_section gdbarch method. * amd64-linux-tdep.c (amd64_linux_supply_xstateregset) (amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New. Moved from amd64-tdep.c and renamed to *_linux*. (amd64_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. Allow any .reg-xstate size when reading from a core file. * arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove. (arm_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. (arm_linux_init_abi): No longer set the regset_from_core_section gdbarch method. * ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove. (ppc_linux_iterate_over_regset_sections): Add regset parameter to each callback invocation. (ppc_linux_init_abi): No longer set the regset_from_core_section gdbarch method. * s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields gregset, sizeof_gregset, fpregset, and sizeof_fpregset. (s390_regset_from_core_section): Remove. (s390_iterate_over_regset_sections): Add regset parameter to each callback invocation. (s390_gdbarch_init): No longer set the regset_from_core_section gdbarch method. Drop initialization of deleted tdep fields.
2014-05-21X86: Replace regset_alloc() invocations by static regset structures.Andreas Arnez1-12/+2
After removal of the regset_alloc invocations, the appropriate tdep fields become obsolete and are thus removed.
2014-04-24Add AVX512 registers support to GDB and GDBserver.Michael Sturm1-2/+62
This patch adds support for the Intel(R) Advanced Vector Extensions 512 (Intel(R) AVX-512) registers. Native and remote debugging are covered by this patch. Intel(R) AVX-512 is an extension to AVX to support 512-bit wide SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31). The number of available registers in 32-bit mode is still 8 (XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers are aliased to the respective 256-bit YMM registers. The lower 128-bits are aliased to the respective 128-bit XMM registers. There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit mode and 64-bit mode. For more information please see Intel(R) Developer Zone: Intel(R) AVX http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495 Intel(R) Architecture Instruction Set Extensions Programming Reference: http://software.intel.com/en-us/file/319433-017pdf 2014-04-24 Michael Sturm <michael.sturm@mintel.com> Walfred Tedeschi <walfred.tedeschi@intel.com> * amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add AVX512 registers. (amd64_linux_read_description): Add code to handle AVX512 xstate mask and return respective tdesc. * amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c and features/i386/x32-avx512-linux.c. (amd64_linux_gregset_reg_offset): Add AVX512 registers. (amd64_linux_core_read_description): Add code to handle AVX512 xstate mask and return respective tdesc. (_initialize_amd64_linux_tdep): Initialize AVX512 tdesc. * amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum calculation. (AMD64_LINUX_NUM_REGS): Adjust to new number of registers. (tdesc_amd64_avx512_linux): New prototype. (tdesc_x32_avx512_linux): Likewise. * amd64-tdep.c: Include features/i386/amd64-avx512.c and features/i386/x32-avx512.c. (amd64_ymm_avx512_names): New register names for pseudo registers YMM16-31. (amd64_ymmh_avx512_names): New register names for raw registers YMMH16-31. (amd64_k_names): New register names for K registers. (amd64_zmmh_names): New register names for ZMM raw registers. (amd64_zmm_names): New registers names for ZMM pseudo registers. (amd64_xmm_avx512_names): New register names for XMM16-31 registers. (amd64_pseudo_register_name): Add code to return AVX512 pseudo registers. (amd64_init_abi): Add code to intitialize AVX512 tdep variables if feature is present. (_initialize_amd64_tdep): Call AVX512 tdesc initializers. * amd64-tdep.h (enum amd64_regnum): Add AVX512 registers. (AMD64_NUM_REGS): Adjust to new number of registers. * i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of registers supplied via XSTATE by AVX512 registers. (i386_linux_read_description): Add case for AVX512. * i386-linux-tdep.c: Include i386-avx512-linux.c. (i386_linux_gregset_reg_offset): Add AVX512 registers. (i386_linux_core_read_description): Add case for AVX512. (i386_linux_init_abi): Install supported register note section for AVX512. (_initialize_i386_linux_tdep): Add call to tdesc init function for AVX512. * i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of registers to be number of zmm7h + 1. (tdesc_i386_avx512_linux): Add tdesc for AVX512 registers. * i386-tdep.c: Include features/i386/i386-avx512.c. (i386_zmm_names): Add ZMM pseudo register names array. (i386_zmmh_names): Add ZMM raw register names array. (i386_k_names): Add K raw register names array. (num_lower_zmm_regs): Add constant for the number of lower ZMM registers. AVX512 has 16 more ZMM registers than there are YMM registers. (i386_zmmh_regnum_p): Add function to look up register number of ZMM raw registers. (i386_zmm_regnum_p): Likewise for ZMM pseudo registers. (i386_k_regnum_p): Likewise for K raw registers. (i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw registers added by AVX512. (i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo registers added by AVX512. (i386_xmm_avx512_regnum_p): Likewise for additional XMM registers added by AVX512. (i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31. (i386_pseudo_register_name): Add ZMM pseudo registers. (i386_zmm_type): Construct and return vector registers type for ZMM registers. (i386_pseudo_register_type): Return appropriate type for YMM16-31, ZMM0-31 pseudo registers and K registers. (i386_pseudo_register_read_into_value): Add code to read K, ZMM and YMM16-31 registers from register cache. (i386_pseudo_register_write): Add code to write K, ZMM and YMM16-31 registers. (i386_register_reggroup_p): Add code to include/exclude AVX512 registers in/from respective register groups. (i386_validate_tdesc_p): Handle AVX512 feature, add AVX512 registers if feature is present in xcr0. (i386_gdbarch_init): Add code to initialize AVX512 feature variables in tdep structure, wire in pseudo registers and call initialize_tdesc_i386_avx512. * i386-tdep.h (struct gdbarch_tdep): Add AVX512 related variables. (i386_regnum): Add AVX512 registers. (I386_SSE_NUM_REGS): New define for number of SSE registers. (I386_AVX_NUM_REGS): Likewise for AVX registers. (I386_AVX512_NUM_REGS): Likewise for AVX512 registers. (I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are 512 bits wide. (i386_xmm_avx512_regnum_p): New prototype for register look up. (i386_ymm_avx512_regnum_p): Likewise. (i386_k_regnum_p): Likewise. (i386_zmm_regnum_p): Likewise. (i386_zmmh_regnum_p): Likewise. * i387-tdep.c : Update year in copyright notice. (xsave_ymm_avx512_offset): New table for YMM16-31 offsets in XSAVE buffer. (XSAVE_YMM_AVX512_ADDR): New macro. (xsave_xmm_avx512_offset): New table for XMM16-31 offsets in XSAVE buffer. (XSAVE_XMM_AVX512_ADDR): New macro. (xsave_avx512_k_offset): New table for K register offsets in XSAVE buffer. (XSAVE_AVX512_K_ADDR): New macro. (xsave_avx512_zmm_h_offset): New table for ZMM register offsets in XSAVE buffer. (XSAVE_AVX512_ZMM_H_ADDR): New macro. (i387_supply_xsave): Add code to supply AVX512 registers to XSAVE buffer. (i387_collect_xsave): Add code to collect AVX512 registers from XSAVE buffer. * i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number of XMM16-31 registers. (I387_NUM_K_REGS): New define for number of K registers. (I387_K0_REGNUM): New define for K0 register number. (I387_NUM_ZMMH_REGS): New define for number of ZMMH registers. (I387_ZMM0H_REGNUM): New define for ZMM0H register number. (I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31 registers. (I387_YMM16H_REGNUM): New define for YMM16H register number. (I387_XMM16_REGNUM): New define for XMM16 register number. (I387_YMM0_REGNUM): New define for YMM0 register number. (I387_KEND_REGNUM): New define for last K register number. (I387_ZMMENDH_REGNUM): New define for last ZMMH register number. (I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register number. (I387_XMM_AVX512_END_REGNUM): New define for XMM31 register number. * common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE size. * features/Makefile: Add AVX512 related files. * features/i386/32bit-avx512.xml: New file. * features/i386/64bit-avx512.xml: Likewise. * features/i386/amd64-avx512-linux.c: Likewise. * features/i386/amd64-avx512-linux.xml: Likewise. * features/i386/amd64-avx512.c: Likewise. * features/i386/amd64-avx512.xml: Likewise. * features/i386/i386-avx512-linux.c: Likewise. * features/i386/i386-avx512-linux.xml: Likewise. * features/i386/i386-avx512.c: Likewise. * features/i386/i386-avx512.xml: Likewise. * features/i386/x32-avx512-linux.c: Likewise. * features/i386/x32-avx512-linux.xml: Likewise. * features/i386/x32-avx512.c: Likewise. * features/i386/x32-avx512.xml: Likewise. * regformats/i386/amd64-avx512-linux.dat: New file. * regformats/i386/amd64-avx512.dat: Likewise. * regformats/i386/i386-avx512-linux.dat: Likewise. * regformats/i386/i386-avx512.dat: Likewise. * regformats/i386/x32-avx512-linux.dat: Likewise. * regformats/i386/x32-avx512.dat: Likewise. * NEWS: Add note about new support for AVX512. testsuite/ * Makefile.in (EXECUTABLES): Added i386-avx512. * gdb.arch/i386-avx512.c: New file. * gdb.arch/i386-avx512.exp: Likewise. gdbserver/ * Makefile.in: Added rules to handle new files i386-avx512.c i386-avx512-linux.c amd64-avx512.c amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c. * configure.srv (srv_i386_regobj): Add i386-avx512.o. (srv_i386_linux_regobj): Add i386-avx512-linux.o. (srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o. (srv_amd64_linux_regobj): Add amd64-avx512-linux.o and x32-avx512-linux.o. (srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml. (srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml. (srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and i386/x32-avx512.xml. (srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml. (srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and i386/x32-avx512-linux.xml. * i387-fp.c (num_avx512_k_registers): New constant for number of K registers. (num_avx512_zmmh_low_registers): New constant for number of lower ZMM registers (0-15). (num_avx512_zmmh_high_registers): New constant for number of higher ZMM registers (16-31). (num_avx512_ymmh_registers): New contant for number of higher YMM registers (ymm16-31 added by avx521 on x86_64). (num_avx512_xmm_registers): New constant for number of higher XMM registers (xmm16-31 added by AVX512 on x86_64). (struct i387_xsave): Add space for AVX512 registers. (i387_cache_to_xsave): Change raw buffer size to 64 characters. Add code to handle AVX512 registers. (i387_xsave_to_cache): Add code to handle AVX512 registers. * linux-x86-low.c (init_registers_amd64_avx512_linux): New prototypei from generated file. (tdesc_amd64_avx512_linux): Likewise. (init_registers_x32_avx512_linux): Likewise. (tdesc_x32_avx512_linux): Likewise. (init_registers_i386_avx512_linux): Likewise. (tdesc_i386_avx512_linux): Likewise. (x86_64_regmap): Add AVX512 registers. (x86_linux_read_description): Add code to handle AVX512 XSTATE mask. (initialize_low_arch): Add code to initialize AVX512 registers. doc/ * gdb.texinfo (i386 Features): Add description of AVX512 registers. Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438 Signed-off-by: Michael Sturm <michael.sturm@intel.com>
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-20Add MPX support for i386Walfred Tedeschi1-1/+23
2013-11-20 Walfred Tedeschi <walfred.tedeschi@intel.com> * i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Add MPX registers on the range of registers to be read from xsave buffer. (i386_linux_read_description): Add case for MPX. * i386-linux-tdep.c: Include features/i386/i386-mpx-linux.c. (i386_linux_gregset_reg_offset): Add MPX registers. (i386_linux_core_read_description): Initialize also MPX. (_initialize_i386_linux_tdep): Add mpx initialization. * i386-tdep.h (gdbarch_tdep): Add fields bnd0r_regnum, bnd0_regnum, mpx_register_names. (i386_regnum): Add MPX registers. (I386_MPX_NUM_REGS): New macro. (i386_bnd_regnum_p): New function. * i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of registers to be the number of BNDSTATUS. (tdesc_i386_mpx_linux): Add description for MPX Linux registers. * i386-tdep.c: Include features/i386/i386-mpx.c. (i386_mpx_names): Add MPX register names array. (i386_bnd_names): Add bnd pseudo register names array. (i386_bndr_regnum_p): Lookup register numbers for bnd raw registers. (i386_bndr_regnum_p): Lookup register numbers for bnd raw registers. (386_mpx_ctrl_regnum_p): Lookup register numbers for MPX control registers. (i386_bnd_type): New function. (i386_pseudo_register_type): Use i386_bnd_type for bnd pseudo register types. (i386_pseudo_register_read_into_value): Add bnd case. (i386_pseudo_register_write): Add bnd pseudo registers. (i386_register_reggroup_p): Add MPX register to the group all. (i386_validate_tdesc_p): Add MPX to the target description validation. (i386_pseudo_register_name): Add bnd pseudo registers. (i386_gdbarch_init): Add MPX for architecture initialization. (_initia_initialize_i386_tdep): Add mpx initialization. * i387-tdep.c (xsave_mpx_offset): New vector for MPX offsets on XSAVE buffer. (XSAVE_MPX_ADDR): New macro. (i387_supply_xsave): Add MPX case. (i387_collect_xsave): Add MPX case. * i387-tdep.h (I387_BND0R_REGNUM): New macro. (I387_BNDCFGU_REGNUM): New macro. (I387_NUM_MPX_REGS): New macro. (I387_NUM_BND_REGS): New macro. (I387_NUM_MPX_CTRL_REGS): New macro. (I387_MPXEND_REGNUM): New macro. * common/i386-xstate.h (I386_XSTATE_BNDREGS): New macro. (I386_XSTATE_BNDCFG): Likewise. (I386_XSTATE_MPX_MASK): Likewise. (I386_XSTATE_ALL_MASK): New macro represents flags for all states. (I386_XSTATE_BNDREGS_SIZE): New macro. (I386_XSTATE_BNDCFG_SIZE): Likewise. (I386_XSTATE_SIZE): Adapt for MPX. (I386_XSTATE_MAX_SIZE): Likewise. Change-Id: I9ddb7d49434d86fa18eb6b99515203d7c567aefd Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com> Conflicts: gdb/ChangeLog
2013-09-24Revert use of classify callback in i386 gdbarch_tdep.Joel Brobecker1-24/+0
This is no longer useful, as it was introduced to reuse the funcall handling code in amd64-tdep.c in the context of x64-windows. But we have since then changed the implementations to be completely independent of each other. This reverts the non-windows-specific part of the change called: amd64: Integer parameters in function calls on Windows (the x64-windows portion has already been reverted) gdb/ChangeLog: Revert: * i386-tdep.h (enum amd64_reg_class): New, moved here from amd64-tdep.c. (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs, call_dummy_integer_regs, and classify. * amd64-tdep.h (amd64_classify): Add declaration. * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant. (amd64_reg_class): Delete, moved to i386-tdep.h. (amd64_classify): Make non-static. Move declaration to amd64-tdep.h. Replace call to amd64_classify by call to tdep->classify. (amd64_push_arguments): Get the list of registers to use for passing integer parameters from the gdbarch tdep structure, rather than using a hardcoded one. Replace calls to amd64_classify by calls to tdep->classify. (amd64_push_dummy_call): Get the register number used for the "hidden" argument from tdep->call_dummy_integer_regs. (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs and tdep->call_dummy_integer_regs. Set tdep->classify.
2013-09-24Revert use of memory_args_by_pointer in i386 gdbarch_tdep.Joel Brobecker1-9/+0
This is no longer useful, as it was introduced to reuse the funcall handling code in amd64-tdep.c in the context of x64-windows. But we have since then changed the implementations to be completely independent of each other. This reverts the non-windows-specific part of the change called: amd64-windows: memory args passed by pointer during function calls. (the x64-windows portion has already been reverted) gdb/ChangeLog: Revert: * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer. * amd64-tdep.c (amd64_push_arguments): Add handling of architectures where tdep->memory_args_by_pointer is non-zero.
2013-09-24Revert use of integer_param_regs_saved_in_caller_frame in i386 gdbarch_tdep.Joel Brobecker1-14/+4
This is no longer useful, as it was introduced to reuse the funcall handling code in amd64-tdep.c in the context of x64-windows. But we have since then changed the implementations to be completely independent of each other. This reverts the non-windows-specific part of the change called: amd64-windows: 32 bytes allocated on stack by caller for integer parameter regs (the x64-windows portion has already been reverted) gdb/ChangeLog: Revert: * i386-tdep.h (struct gdbarch_tdep): Add new field integer_param_regs_saved_in_caller_frame. * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on stack if tdep->integer_param_regs_saved_in_caller_frame is set.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-10-15Remove sp_regnum_from_eax and pc_regnum_from_eaxH.J. Lu1-8/+0
PR backtrace/14646 PR gdb/14647 * i386-tdep.h (gdbarch_tdep): Remove sp_regnum_from_eax and pc_regnum_from_eax. * i386-tdep.c (i386_gdbarch_init): Don't use sp_regnum_from_eax nor pc_regnum_from_eax. * amd64-tdep.c (amd64_x32_init_abi): Don't set sp_regnum_from_eax nor pc_regnum_from_eax.
2012-07-04Add sp_regnum_from_eax/pc_regnum_from_eax to i386 gdbarch_tdepH.J. Lu1-0/+8
* amd64-tdep.c (amd64_x32_init_abi): Set sp_regnum_from_eax to AMD64_RSP_REGNUM and pc_regnum_from_eax to AMD64_RIP_REGNUM. * i386-tdep.c (i386_gdbarch_init): Initialize sp_regnum_from_eax and pc_regnum_from_eax to -1. Update SP regnum from sp_regnum_from_eax and PC regnum from pc_regnum_from_eax if needed. * i386-tdep.h (gdbarch_tdep): Add sp_regnum_from_eax and pc_regnum_from_eax.
2012-06-13 H.J. Lu <hongjiu.lu@intel.com>Mark Kettenis1-0/+2
* i386-tdep.h (i386_pseudo_register_name): New prototype. * i386-tdep.c (i386_pseudo_register_name): Make public. * amd64-tdep.h (amd64_x32_init_abi): New prototype. * amd64-tdep.c (amd64_dword_names): Add "eip". (amd64_x32_pseudo_register_type): New function (amd64_x32_init_abi): New function.
2012-04-272012-04-27 Sergio Durigan Junior <sergiodj@redhat.com>Sergio Durigan Junior1-0/+9
Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker1-2/+1
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-07-22gdbTom Tromey1-4/+5
* amd64-tdep.c (amd64_pseudo_register_read_value): Rename from amd64_pseudo_register_read. Change arguments. Call mark_value_bytes_unavailable when needed. (amd64_init_abi): Use set_gdbarch_pseudo_register_read_value, not set_gdbarch_pseudo_register_read. * sentinel-frame.c (sentinel_frame_prev_register): Use regcache_cooked_read_value. * regcache.h (regcache_cooked_read_value): Declare. * regcache.c (regcache_cooked_read_value): New function. (regcache_cooked_read): Call gdbarch_pseudo_register_read_value if available. * i386-tdep.h (i386_pseudo_register_read_value): Declare. (i386_pseudo_register_read): Remove. * i386-tdep.c (i386_pseudo_register_read_into_value): Rename from i386_pseudo_register_read. Change arguments. Call mark_value_bytes_unavailable when needed. (i386_pseudo_register_read_value): New function. (i386_gdbarch_init): Call set_gdbarch_pseudo_register_read_value, not set_gdbarch_pseudo_register_read. * gdbarch.sh (pseudo_register_read_value): New method. * gdbarch.c, gdbarch.h: Rebuild. * findvar.c (value_from_register): Call get_frame_register_value. gdb/testsuite * gdb.dwarf2/typeddwarf.c: XFAIL 'z' on x86-64. * gdb.dwarf2/typeddwarf.exp (xfail-gdb-test): Add arch_pattern argument. * gdb.dwarf2/typeddwarf-amd64.S: New file.
2011-03-18 gdb/Pedro Alves1-3/+4
* regcache.h (regcache_raw_read, regcache_raw_read_signed) (regcache_raw_read_unsigned, regcache_raw_read_signed) (regcache_raw_read_unsigned, regcache_raw_read_part) (regcache_cooked_read, regcache_cooked_read_signed) (regcache_cooked_read_unsigned, regcache_cooked_read_part) (regcache_cooked_read_ftype): Change return to enum register_status. * regcache.c: Include exceptions.h (regcache_save): Adjust to handle REG_UNAVAILABLE registers. (do_cooked_read): Change return to enum register_status. Always forward to regcache_cooked_read. (regcache_raw_read): Change return to enum register_status. If the register is not REG_VALID, memset the buffer. Return the register's status. (regcache_raw_read_signed): Handle non-REG_VALID registers and return the register's status. (regcache_raw_read_unsigned): Ditto. (regcache_cooked_read): Change return to enum register_status. Assert that with read-only regcaches, the register's status must be known. If the regcache is read-only, and the register is not REG_VALID, memset the buffer. Return the register's status. (regcache_cooked_read_signed): Change return to enum register_status. Handle non-REG_VALID registers and return the register's status. (regcache_cooked_read_unsigned): Change return to enum register_status. Handle non-REG_VALID registers and return the register's status. (regcache_xfer_part, regcache_raw_read_part) (regcache_cooked_read_part): Change return to enum register_status. Return the register's status. (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is unavailable. (regcache_dump): Handle unavailable cooked registers. * frame.c (do_frame_register_read): Adjust interface to match regcache_cooked_read_ftype. * gdbarch.sh (pseudo_register_read): Change return to enum register_status. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.h (i386_pseudo_register_read): Change return to enum register_status. * i386-tdep.c (i386_pseudo_register_read): Change return to enum register_status. If reading a raw register indicates the raw register is not valid, return the raw register's status, otherwise, return REG_VALID. * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum register_status. Handle non-REG_VALID raw registers and return the register's status. * arm-tdep.c (arm_neon_quad_read) (arm_pseudo_read): Change return to enum register_status. Handle non-REG_VALID raw registers and return the register's status. * avr-tdep.c (avr_pseudo_register_read): Ditto. * frv-tdep.c (frv_pseudo_register_read): Ditto. * h8300-tdep.c (h8300_pseudo_register_read): Ditto. * hppa-tdep.c (hppa_pseudo_register_read): Ditto. * m32c-tdep.c (m32c_move_reg_t): Change return to enum register_status. (m32c_raw_read, m32c_raw_write, m32c_banked_read) (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read) (m32c_part_write, m32c_cat_read, m32c_cat_write) (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write) (m32c_pseudo_register_read): Change return to enum register_status. Adjust. * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to enum register_status. Return the register's status. * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum register_status. Return the register's status. (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto. * mips-tdep.c (mips_pseudo_register_read): Ditto. * mt-tdep.c (mt_pseudo_register_read): Ditto. * rs6000-tdep.c (move_ev_register_func): New typedef. (e500_move_ev_register): Use it. Change return to enum register_status. Return the register's status. (do_regcache_raw_read): New function. (do_regcache_raw_write): New function. (e500_pseudo_register_read): Change return to enum register_status. Return the register's status. Use do_regcache_raw_read. (e500_pseudo_register_write): Adjust. Use do_regcache_raw_write. (dfp_pseudo_register_read): Change return to enum register_status. Return the register's status. (vsx_pseudo_register_read): Ditto. (efpr_pseudo_register_read): Ditto. (rs6000_pseudo_register_read): Ditto. * s390-tdep.c (s390_pseudo_register_read): Change return to enum register_status. Return the register's status. * sh64-tdep.c (pseudo_register_read_portions): New function. (sh64_pseudo_register_read): Change return to enum register_status. Use pseudo_register_read_portions. Return the register's status. * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum register_status. Return the register's status. * sh-tdep.c (pseudo_register_read_portions): New function. (sh_pseudo_register_read): Change return to enum register_status. Use pseudo_register_read_portions. Return the register's status. * sparc-tdep.c (sparc32_pseudo_register_read): Change return to enum register_status. Return the register's status. * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto. * spu-tdep.c (spu_pseudo_register_read_spu) (spu_pseudo_register_read): Ditto. * xtensa-tdep.c (xtensa_register_read_masked) (xtensa_pseudo_register_read): Ditto. * bfin-tdep.c (bfin_pseudo_register_read): Ditto.
2011-01-092011-01-08 Michael Snyder <msnyder@vmware.com>Michael Snyder1-5/+6
* h8300-tdep.c: Comment cleanup, mostly periods and spaces. * hppa-hpux-tdep.c: Ditto. * hppa-linux-nat.c: Ditto. * hppa-linux-tdep.c: Ditto. * hppanbsd-tdep.c: Ditto. * hppa-tdep.c: Ditto. * hppa-tdep.h: Ditto. * hpux-thread.c: Ditto. * i386-cygwin-tdep.c: Ditto. * i386-darwin-nat.c: Ditto. * i386gnu-nat.c: Ditto. * i386-linux-nat.c: Ditto. * i386-linux-tdep.c: Ditto. * i386-nat.c: Ditto. * i386-nat.h: Ditto. * i386nbsd-tdep.c: Ditto. * i386-sol2-nat.c: Ditto. * i386-stub.c: Ditto. * i386-tdep.c: Ditto. * i386-tdep.h: Ditto. * i387-tdep.c: Ditto. * ia64-linux-nat.c: Ditto. * ia64-linux-tdep.c: Ditto. * ia64-tdep.c: Ditto. * infcall.c: Ditto. * infcall.h: Ditto. * infcmd.c: Ditto. * inferior.c: Ditto. * inferior.h: Ditto. * infloop.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * interps.c: Ditto. * interps.h: Ditto. * iq2000-tdep.c: Ditto. * irix5-nat.c: Ditto. * jit.c: Ditto. * jit.h: Ditto. * jv-exp.y: Ditto. * jv-lang.c: Ditto. * jv-lang.h: Ditto. * jv-typeprint.c: Ditto. * jv-valprint.c: Ditto. * language.c: Ditto. * language.h: Ditto. * linespec.c: Ditto. * linux-fork.c: Ditto. * linux-nat.c: Ditto. * linux-thread-db.c: Ditto. * lm32-tdep.c: Ditto.
2011-01-01run copyright.sh for 2011.Joel Brobecker1-1/+1
2010-09-11Remove amd64_register_name.H.J. Lu1-1/+0
2010-09-11 H.J. Lu <hongjiu.lu@intel.com> * amd64-tdep.c (amd64_register_name): Removed. (amd64_init_abi): Don't call set_gdbarch_register_name. * i386-tdep.c (i386_ymmh_regnum_p): Make it static. * i386-tdep.h (i386_ymmh_regnum_p): Removed.
2010-06-22 * i386-tdep.h (i386_displaced_step_copy_insn): Declare.Doug Evans1-0/+3
* i386-tdep.c (i386_displaced_step_copy_insn): New function. (i386_syscall_p): Change type of lengthp to int. (i386_displaced_step_fixup): Handle kernels that run one past a syscall insn. * i386-linux-tdep.c (i386_linux_init_abi): Use i386_displaced_step_copy_insn instead of simple_displaced_step_copy_insn.
2010-04-07Support i386 AVX.H.J. Lu1-1/+33
2010-04-07 H.J. Lu <hongjiu.lu@intel.com> * i386-linux-nat.c: Include "regset.h", "elf/common.h", <sys/uio.h> and "i386-xstate.h". (PTRACE_GETREGSET): New. (PTRACE_SETREGSET): Likewise. (fetch_xstateregs): Likewise. (store_xstateregs): Likewise. (GETXSTATEREGS_SUPPLIES): Likewise. (regmap): Include 8 upper YMM registers. (i386_linux_fetch_inferior_registers): Support XSAVE extended state. (i386_linux_store_inferior_registers): Likewise. (i386_linux_read_description): Check and enable AVX target descriptions. * i386-linux-tdep.c: Include "regset.h", "i387-tdep.h", "i386-xstate.h" and "features/i386/i386-avx-linux.c". (i386_linux_regset_sections): Add ".reg-xstate". (i386_linux_gregset_reg_offset): Include 8 upper YMM registers. (i386_linux_core_read_xcr0): New. (i386_linux_core_read_description): Check and enable AVX target description. (i386_linux_init_abi): Set xsave_xcr0_offset. (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_avx_linux. * i386-linux-tdep.h (I386_LINUX_ORIG_EAX_REGNUM): Replace I386_SSE_NUM_REGS with I386_AVX_NUM_REGS. (i386_linux_core_read_xcr0): New. (tdesc_i386_avx_linux): Likewise. (I386_LINUX_XSAVE_XCR0_OFFSET): Likewise. * i386-tdep.c: Include "i386-xstate.h" and "features/i386/i386-avx.c". (i386_ymm_names): New. (i386_ymmh_names): Likewise. (i386_ymmh_regnum_p): Likewise. (i386_ymm_regnum_p): Likewise. (i386_xmm_regnum_p): Likewise. (i386_register_name): Likewise. (i386_ymm_type): Likewise. (i386_supply_xstateregset): Likewise. (i386_collect_xstateregset): Likewise. (i386_sse_regnum_p): Removed. (i386_pseudo_register_name): Support pseudo YMM registers. (i386_pseudo_register_type): Likewise. (i386_pseudo_register_read): Likewise. (i386_pseudo_register_write): Likewise. (i386_dbx_reg_to_regnum): Return %ymmN register number for %xmmN if AVX is available. (i386_regset_from_core_section): Support .reg-xstate section. (i386_register_reggroup_p): Supper upper YMM and YMM registers. (i386_process_record): Replace i386_sse_regnum_p with i386_xmm_regnum_p. (i386_validate_tdesc_p): Support org.gnu.gdb.i386.avx feature. Set ymmh_register_names, num_ymm_regs, ymm0h_regnum and xcr0. (i386_gdbarch_init): Set xstateregset. Set xsave_xcr0_offset. Call set_gdbarch_register_name. Replace I386_SSE_NUM_REGS with I386_AVX_NUM_REGS. Set ymmh_register_names, ymm0h_regnum and num_ymm_regs. Add num_ymm_regs to set_gdbarch_num_pseudo_regs. Set ymm0_regnum. (_initialize_i386_tdep): Call initialize_tdesc_i386_avx. * i386-tdep.h (gdbarch_tdep): Add xstateregset, ymm0_regnum, xcr0, xsave_xcr0_offset, ymm0h_regnum, ymmh_register_names and i386_ymm_type. (i386_regnum): Add I386_YMM0H_REGNUM, and I386_YMM7H_REGNUM. (I386_AVX_NUM_REGS): New. (i386_xmm_regnum_p): Likewise. (i386_ymm_regnum_p): Likewise. (i386_ymmh_regnum_p): Likewise. * common/i386-xstate.h: New.
2010-03-02Support x86 pseudo byte, word and dword registers.H.J. Lu1-0/+37
gdb/ 2010-03-02 H.J. Lu <hongjiu.lu@intel.com> * amd64-tdep.c (amd64_byte_names): New. (amd64_word_names): Likewise. (amd64_dword_names): Likewise. (amd64_pseudo_register_name): Likewise. (amd64_pseudo_register_read): Likewise. (amd64_pseudo_register_write): Likewise. (amd64_init_abi): Set num_byte_regs, num_word_regs, num_dword_regs and num_mmx_regs. Call set_gdbarch_pseudo_register_read, set_gdbarch_pseudo_register_write and set_tdesc_pseudo_register_name. Don't call set_gdbarch_num_pseudo_regs. Don't set mm0_regnum. * i386-tdep.c (i386_num_mmx_regs): Removed. (i386_num_pseudo_regs): Likewise. (i386_byte_names): New. (i386_word_names): Likewise. (i386_byte_regnum_p): Likewise. (i386_word_regnum_p): Likewise. (i386_mmx_regnum_p): Updated. (i386_pseudo_register_name): Make it global. Handle byte and word pseudo-registers. (i386_pseudo_register_read): Likewise. (i386_pseudo_register_write): Likewise. (i386_pseudo_register_type): Handle byte, word and dword pseudo-registers (i386_register_reggroup_p): Don't include pseudo registers, except for MXX, in any register groups. Don't include pseudo byte, word, dword registers in general_reggroup. (i386_gdbarch_init): Set num_byte_regs, num_word_regs, num_dword_regs, al_regnum, ax_regnum and eax_regnum. Put MMX pseudo-registers after word pseudo-registers. Call set_gdbarch_num_pseudo_regs after calling gdbarch_init_osabi. * i386-tdep.h (gdbarch_tdep): Add num_mmx_regs, num_byte_regs, al_regnum, num_word_regs, ax_regnum, num_dword_regs and eax_regnum. (i386_byte_regnum_p): New. (i386_word_regnum_p): Likewise. (i386_dword_regnum_p): Likewise. (i386_pseudo_register_name): Likewise. (i386_pseudo_register_read): Likewise. (i386_pseudo_register_write): Likewise. gdb/testsuite/ 2010-03-02 H.J. Lu <hongjiu.lu@intel.com> * gdb.arch/amd64-byte.exp: New. * gdb.arch/amd64-dword.exp: Likewise. * gdb.arch/amd64-pseudo.c: Likewise. * gdb.arch/amd64-word.exp: Likewise. * gdb.arch/i386-byte.exp: Likewise. * gdb.arch/i386-pseudo.c: Likewise. * gdb.arch/i386-word.exp: Likewise.
2010-03-01Enable XML target descriptions for x86.H.J. Lu1-14/+15
gdb/ 2010-03-01 H.J. Lu <hongjiu.lu@intel.com> * amd64-linux-nat.c (AMD64_LINUX_USER64_CS): New. (amd64_linux_read_description): Likewise. (_initialize_amd64_linux_nat): Set to_read_description to amd64_linux_read_description. * amd64-linux-tdep.c: Include "features/i386/amd64-linux.c". (amd64_linux_register_name): Removed. (amd64_linux_register_type): Likewise. (amd64_linux_core_read_description): New. (amd64_linux_init_abi): Set target description to tdesc_amd64_linux if needed. Support orig_rax in target description. Don't call set_gdbarch_register_name nor set_gdbarch_register_type. Call set_gdbarch_core_read_description. (_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_linux. * amd64-linux-tdep.h (tdesc_amd64_linux): New. * amd64-tdep.c: Include "features/i386/amd64.c". (amd64_register_names): Removed. (amd64_register_name): Likewise. (amd64_register_type): Likewise. (amd64_init_abi): Set num_core_regs and register_names. Set target description to tdesc_amd64 if needed. Don't call set_gdbarch_register_name nor set_gdbarch_register_type. (_initialize_amd64_tdep): New. * i386-linux-nat.c (i386_linux_read_description): New. (_initialize_i386_linux_nat): Set to_read_description to i386_linux_read_description. * i386-linux-tdep.c: Include "features/i386/i386-linux.c". (i386_linux_register_name): Removed. (i386_linux_core_read_description): New. (i386_linux_read_description): Likewise. (i386_linux_init_abi): Don't call set_gdbarch_register_name. Set target description to tdesc_i386_linux if needed. Support orig_eax. Set register_reggroup_p. Call set_gdbarch_core_read_description. (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_linux. * i386-linux-tdep.h (tdesc_i386_linux): New. * i386-nto-tdep.c (i386nto_regset_id): Replace I386_NUM_FREGS with I387_NUM_REGS. * i386-tdep.c: Include "features/i386/i386.c". (i386_register_names): Make it const. (i386_mmx_names): Likewise. (i386_num_register_names): Removed. (i386_register_name): Likewise. (i386_eflags_type): Likewise. (i386_mxcsr_type): Likewise. (i386_sse_type): Likewise. (i386_register_type): Likewise. (i387_ext_type): Call tdesc_find_type instead of arch_float_type. (i386_pseudo_register_name): New. (i386_pseudo_register_type): Likewise. (i386_mmx_type): Make it static. (i386_gdbarch_init): Check arch. Replace I386_NUM_FREGS with I387_NUM_REGS. Set num_core_regs and register_names. Don't call set_gdbarch_register_name nor set_gdbarch_register_type. Set register_reggroup_p. Set target description to tdesc_i386 if needed. Call set_tdesc_pseudo_register_type, set_tdesc_pseudo_register_name and tdesc_use_registers. (_initialize_i386_tdep): Call initialize_tdesc_i386. initialize_tdesc_x86_64. * i386-tdep.h (gdbarch_tdep): Remove i386_eflags_type, i386_mxcsr_type and i386_sse_type. Add num_core_regs, register_names, tdesc and register_reggroup_p. (I386_NUM_FREGS): Removed. (i386_eflags_type): Likewise. (i386_mxcsr_type): Likewise. (i386_mmx_type): Likewise. (i386_sse_type): Likewise. (i386_register_name): Likewise. (i386_regnum): Add I386_MXCSR_REGNUM. (I386_SSE_NUM_REGS): Defined with I386_MXCSR_REGNUM. * i387-tdep.h (I387_NUM_REGS): New. * regformats/i386/i386-linux.dat: Generated. * regformats/i386/i386.dat: Likewise. * regformats/i386/amd64-linux.dat: Likewise. * regformats/i386/amd64.dat: Likewise. * regformats/reg-i386-linux.dat: Removed. * regformats/reg-i386.dat: Likewise. * regformats/reg-x86-64-linux.dat: Likewise. * regformats/reg-x86-64.dat: Likewise. gdb/gdbserver/ 2010-03-01 H.J. Lu <hongjiu.lu@intel.com> * Makefile.in (clean): Replace reg-i386.c, reg-x86-64.c, reg-i386-linux.c and reg-x86-64-linux.c with i386.c, amd64.c, i386-linux.c and amd64-linux.c. (reg-i386.o): Removed. (reg-i386.c): Likewise. (reg-i386-linux.o): Likewise. (reg-i386-linux.c): Likewise. (reg-x86-64.o): Likewise. (reg-x86-64.c): Likewise. (reg-x86-64-linux.o): Likewise. (reg-x86-64-linux.c): Likewise. (i386.o): New. (i386.c): Likewise. (i386-linux.o): Likewise. (i386-linux.c): Likewise. (amd64.o): Likewise. (amd64.c): Likewise. (amd64-linux.o): Likewise. (amd64-linux.c): Likewise. * configure.srv (srv_i386_regobj): New. (srv_i386_linux_regobj): Likewise. (srv_amd64_regobj): Likewise. (srv_amd64_linux_regobj): Likewise. (srv_i386_32bit_xmlfiles): Likewise. (srv_i386_64bit_xmlfiles): Likewise. (srv_i386_xmlfiles): Likewise. (srv_amd64_xmlfiles): Likewise. (srv_i386_linux_xmlfiles): Likewise. (srv_amd64_linux_xmlfiles): Likewise. (i[34567]86-*-cygwin*): Set srv_regobj to $srv_i386_regobj. Set srv_xmlfiles to $srv_i386_xmlfiles. (i[34567]86-*-mingw32ce*): Likewise. (i[34567]86-*-mingw*): Likewise. (i[34567]86-*-nto*): Likewise. (i[34567]86-*-linux*): Set srv_regobj to $srv_i386_linux_regobj and $srv_amd64_linux_regobj. Set srv_xmlfiles to $srv_i386_linux_xmlfiles and $srv_amd64_linux_xmlfiles. (x86_64-*-linux*): Likewise. * linux-x86-low.c (init_registers_x86_64_linux): Removed. (init_registers_amd64_linux): New. (x86_arch_setup): Replace init_registers_x86_64_linux with init_registers_amd64_linux. gdb/testsuite/ 2010-03-01 H.J. Lu <hongjiu.lu@intel.com> * gdb.xml/tdesc-regs.exp (architecture): New. Set it for x86. (load_description): Set architecture if defined.
2010-01-29amd64-windows: 32 bytes allocated on stack by caller for integer parameter ↵Joel Brobecker1-4/+14
registers * i386-tdep.h (struct gdbarch_tdep): Add new field integer_param_regs_saved_in_caller_frame. * amd64-windows-tdep.c (amd64_windows_init_abi): Set tdep->integer_param_regs_saved_in_caller_frame to 1. * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on stack if tdep->integer_param_regs_saved_in_caller_frame is set.
2010-01-29amd64-windows: memory args passed by pointer during function calls.Joel Brobecker1-0/+9
* i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer. * amd64-tdep.c (amd64_push_arguments): Add handling of architectures where tdep->memory_args_by_pointer is non-zero. * amd64-windows-tdep.c (amd64_windows_init_abi): Set tdep->memory_args_by_pointer to 1.
2010-01-29amd64: Integer parameters in function calls on Windows.Joel Brobecker1-0/+24
gdb/ChangeLog: * i386-tdep.h (enum amd64_reg_class): New, moved here from amd64-tdep.c. (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs, call_dummy_integer_regs, and classify. * amd64-tdep.h (amd64_classify): Add declaration. * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant. (amd64_reg_class): Delete, moved to i386-tdep.h. (amd64_classify): Make non-static. Move declaration to amd64-tdep.h. Replace call to amd64_classify by call to tdep->classify. (amd64_push_arguments): Get the list of registers to use for passing integer parameters from the gdbarch tdep structure, rather than using a hardcoded one. Replace calls to amd64_classify by calls to tdep->classify. (amd64_push_dummy_call): Get the register number used for the "hidden" argument from tdep->call_dummy_integer_regs. (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs and tdep->call_dummy_integer_regs. Set tdep->classify. * amd64-windows-tdep.c: Add include of gdbtypes.h. (amd64_windows_dummy_call_integer_regs): New static global. (amd64_windows_classify): New function. (amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs tdep->call_dummy_integer_regs and tdep->classify. gdb/testsuite/ChangeLog: * gdb.ada/call_pn: New testcase.
2010-01-01Update copyright year in most headers.Joel Brobecker1-1/+1
Automatic update by copyright.sh.
2009-08-102009-08-10 Hui Zhu <teawater@gmail.com>Hui Zhu1-0/+35
Add AMD64 process record instruction set support. * i386-tdep.h (gdbarch_tdep): Add record_regmap for registers because the AMD64's registers order in GDB is not same with I386 instructions. Add i386_syscall_record to be the syscall function handle interface. (record_i386_regnum): Number for record_regmap. * i386-tdep.c (OT_QUAD): For 64 bits. (i386_record_s): Add rex_x, rex_b, rip_offset and popl_esp_hack for AMD64 instruction set. And regmap for record_regmap. (i386_record_lea_modrm_addr): Support AMD64 instruction set 64 bits lea. (i386_record_lea_modrm): Ditto. (i386_record_push): New function. Record the execution log of push. (I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the register. (i386_process_record): Support AMD64 instruction set. * amd64-tdep.c (amd64_record_regmap): For record_regmap. (amd64_init_abi): Set amd64_record_regmap to record_regmap.
2009-07-02 * defs.h (extract_signed_integer, extract_unsigned_integer,Ulrich Weigand1-1/+2
extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-02 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type andUlrich Weigand1-3/+4
i386_mxcsr_type members. (i386_eflags_type): Make into function. (i386_mxcsr_type): Likewise. * i386-tdep.c (i386_eflags_type): Make into function. (i386_mxcsr_type): Likewise. (i386_register_type): Update uses. (i386_init_types): Remove. (_initialize_i386_tdep): Do not call it. * amd64-tdep.c (amd64_register_type): Update uses. * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member. * m68k-tdep.c (m68k_ps_type): Make into function. (m68k_register_type): Update use. (m68k_init_types): Remove. (_initialize_m68k_tdep): Do not call it. * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type, sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and sparc64_fprs_type members. * sparc-tdep.c (sparc_psr_type): Make into function. (sparc_fsr_type): Likewise. (sparc32_register_type): Update uses. (sparc_init_types): Remove. (_initialize_sparc_tdep): Do not call it. * sparc64-tdep.c (sparc64_pstate_type): Make into function. (sparc64_fsr_type): Likewise. (sparc64_fprs_type): Likewise. (sparc64_register_type): Update uses. (sparc64_init_types): Remove. (_initialize_sparc64_tdep): Likewise.
2009-07-02 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,Ulrich Weigand1-0/+2
builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext, builtin_type_ia64_spill, builtin_type_ia64_quad): Remove. (init_float_type, init_complex_type): Add prototypes. * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double, builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext, builtin_type_ia64_spill, builtin_type_ia64_quad): Remove. (_initialize_gdbtypes): Do not initialize them. (build_flt): Rename to ... (init_float_type): ... this. Make global. (build_complex): Rename to ... (init_complex_type): ... this. Make global. Remove BIT argument. (gdbtypes_post_init): Update calls. * ada-lang.c (ada_language_arch_info): Use init_float_type. * jv-lang.c (build_java_types): Likewise. * m2-lang.c (build_m2_types): Likewise. * f-lang.c (build_fortran_types): Use init_float_type and init_complex_type. * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead of using builtin_type_ieee_single, builtin_type_ieee_double, or builtin_type_arm_ext. * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member. * ia64-tdep.c (builtin_type_ia64_ext): Remove. (_initialize_ia64_tdep): Do not initialize it. (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext): Move up. (ia64_ext_type): New function. (ia64_register_reggroup_p, ia64_convert_register_p, ia64_register_to_value, ia64_value_to_register, ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type instead of builtin_type_ia64_ext. * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member. (i387_ext_type): Add prototype. * i386-tdep.c (i387_ext_type): New function. (i386_extract_return_value, i386_store_return_value, i386_register_type): Use it instead of builtin_type_i387_ext. * amd64-tdep.c (amd64_register_type): Likewise. * i387-tdep.c (print_i387_value, i387_register_to_value, i387_value_to_register): Likewise. (print_i387_value, print_i387_ext): Add GDBARCH argument. (print_i387_ext, i387_print_float_info): Pass to subroutines. * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member. * m68k-tdep.c (m68881_ext_type): New function. (m68k_register_type, m68k_convert_register_p): Use it instead of builtin_type_m68881_ext. * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member. * arm-tdep.c (arm_ext_type): New function. (arm_register_type): Use it instead of builtin_type_arm_ext. * alpha-tdep.c (alpha_register_type): Use builtin types instead of builtin_type_ieee_double. * mips-tdep.c (mips_float_register_type, mips_double_register_type): Remove. (mips_register_type): Use builtin types instead of builtin_type_ieee_single and builtin_type_ieee_double. (mips_print_fp_register): Use builtin types instead of mips_float_register_type and mips_double_register_type. * hppa-tdep.c (hppa32_register_type, hppa64_register_type): Use builtin types instead of builtin_type_ieee_single and builtin_type_ieee_double.
2009-05-17* i386-tdep.c (i386_process_record): Make it extern.Hui Zhu1-0/+3
(i386_gdbarch_init): Don't call set_gdbarch_process_record here. * i386-tdep.c (i386_process_record): Declare. * i386-linux-tdep.c (i386_linux_init_abi): Call set_gdbarch_process_record.
2009-04-30I386 architecture process record and replay support.Hui Zhu1-0/+6
* i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK, PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386 instruction set. (aflag, dflag, override, modrm, mod, reg, rm, ot, i386_record_pc): New variables. Ditto. (i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm): New functions. Ditto. (i386_process_record): New function. Parse the instruction in address "addr" and record the values of registers and memory that will be changed by this instruction. (i386_gdbarch_init): Set "i386_process_record" to GDBARCH "process_record" interface. * i386-tdep.h (gdbarch_tdep): New function pointers "i386_intx80_record" and "i386_sysenter_record" that point to the function that can record "intx80" and "sysenter" execute log.
2009-02-042009-02-04 Tristan Gingold <gingold@adacore.com>Tristan Gingold1-0/+3
* i386-tdep.c (i386_sigtramp_p): Make it public. * i386-tdep.h (i386_sigtramp_p): Declare.
2009-01-03 Updated copyright notices for most files.Joel Brobecker1-1/+1
2008-06-11 * gdbarch.sh (gdbarch_skip_main_prologue): New.Pierre Muller1-0/+1
* gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.h (i386_skip_main_prologue): Declare. * i386-tdep.c (i386_skip_main_prologue): New. * i386-cygwin-tdep.c (i386_cygwin_init_abi): Register i386_skip_main_prologue as gdbarch_skip_main_prologue gdbarch callback. * symtab.c (find_function_start_sal): When pc points at the "main" function, call gdbarch_skip_main_prologue.
2008-05-02 Implement displaced stepping.Pedro Alves1-0/+10
gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-03-11 * win32-nat.c (do_win32_fetch_inferior_registers): Use get_regcache_archMarkus Deuling1-2/+2
to get at the current architecture and at the target specific vector. Add target specific vector to I387_FISEG_REGNUM and I387_FOP_REGNUM and remove define of I387_ST0_REGNUM. * amd64-tdep.c (I387_ST0_REGNUM): Remove define. (amd64_supply_fxsave, amd64_collect_fxsave): Use get_regcache_arch to get at the current architecture (I387_FISEG_REGNUM, I387_FOSEG_REGNUM): Add target specific vector as parameter. * i386-tdep.c: Remove various define's and undef's of I387_ST0_REGNUM, I387_NUM_XMM_REGS and I387_MM0_REGNUM. (I387_NUM_XMM_REGS, I387_XMM0_REGNUM, I387_MXCSR_REGNUM, I387_ST0_REGNUM, I387_FCTRL_REGNUM, I387_MM0_REGNUM, (I387_FSTAT_REGNUM): Add target specific vector as parameter. (i386_register_name, i386_dbx_reg_to_regnum): Use gdbarch_tdep to get at the target specific vector. (i386_get_longjmp_target): Use get_frame_arch to get at the current architecture. Use gdbarch_tdep to get at the target specific vector. (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter and update caller. Use gdbarch_tdep to get at the target specific vector. (i386_register_to_value: Use get_frame_arch to get at the current architecture. * i386-tdep.h (i386_fp_regnum_p, i386_fpc_regnum_p): Add gdbarch as parameter. * i387-tdep.c (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM, I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_ST0_REGNUM, FSAVE_ADDR, FXSAVE_ADDR, I387_XMM0_REGNUM): Add target specific vector as parameter. (I387_ST0_REGNUM, I387_NUM_XMM_REGS): Remove various define's and undef's. (i387_convert_register_p, i387_register_to_value, i387_value_to_register): Update call for i386_fp_regnum_p. * i387-tdep.h: Remove comment. (I387_ST0_REGNUM, I387_NUM_XMM_REGS, I387_MM0_REGNUM): Add define. (I387_FCTRL_REGNUM, I387_FSTAT_REGNUM, I387_FTAG_REGNUM, I387_FISEG_REGNUM, I387_FIOFF_REGNUM, I387_FOSEG_REGNUM, I387_FOOFF_REGNUM, I387_FOP_REGNUM, I387_XMM0_REGNUM, I387_MXCSR_REGNUM): Add target specific vector as parameter.
2008-01-01 Updated copyright notices for most files.Daniel Jacobowitz1-1/+1
2007-11-022007-11-02 Markus Deuling <deuling@de.ibm.com>Ulrich Weigand1-1/+1
* gdbarch.sh (register_name): Add gdbarch parameter. * gdbarch.{c,h}: Regenerate. * target-descriptions.c (tdesc_register_name): Add gdbarch parameter. (tdesc_register_name): Replace current_gdbarch by gdbarch. * target-descriptions.h (tdesc_register_name): Add gdbarch parameter. * xstormy16-tdep.c (xstormy16_register_name): Add gdbarch parameter. * vax-tdep.c (vax_register_name): Add gdbarch parameter. * spu-tdep.c (spu_register_name): Add gdbarch parameter. * s390-tdep.c (s390_register_name): Add gdbarch parameter. * mt-tdep.c (mt_register_name): Add gdbarch parameter. (mt_registers_info): Replace current_gdbarch by gdbarch. (mt_register_reggroup_p): Add gdbarch to mt_register_name call. * mips-tdep.c (mips_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (mips_register_name): Add gdbarch to tdesc_register_name call. * mep-tdep.c (mep_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (mep_register_reggroup_p): Add gdbarch to mep_register_name call. * m32c-tdep.c (m32c_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. * m88k-tdep.c (m88k_register_name): Add gdbarch parameter. * m68k-tdep.c (m68k_register_name): Add gdbarch parameter. * m32r-tdep.c (m32r_register_name): Add gdbarch parameter. (m32r_frame_unwind_cache): Use get_frame_arch to get at the current architecture by frame_info. * iq2000-tdep.c (iq2000_register_name): Add gdbarch parameter. * ia64-tdep.c (ia64_register_name): Add gdbarch parameter. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Add gdbarch parameter. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Add gdbarch parameter. * cris-tdep.c (cris_register_name, crisv32_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (cris_gdbarch_init): Replace current_gdbarch by gdbarch (comment). * avr-tdep.c (avr_register_name): Add gdbarch parameter. * arm-tdep.c (arm_register_name): Add gdbarch paramete * amd64-tdep.c (amd64_register_name): Add gdbarch parameter. Update caller. * amd64-tdep.h (amd64_register_name): Add gdbarch parameter. * amd64-linux-tdep.c (amd64_linux_register_name): Add gdbarch parameter. * alpha-tdep.c (alpha_register_name): Add gdbarch parameter. (alpha_cannot_fetch_register, alpha_cannot_store_register): Update call of alpha_register_name. * frv-tdep.c (frv_register_name): Add gdbarch parameter. * i386-tdep.c (i386_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (i386_register_type): Replace ?current_gdbarch by gdbarch. * i386-tdep.h (i386_register_name): Add gdbarch parameter. * i386-linux-tdep.c (i386_linux_register_name): Add gdbarch parameter. * m68hc11-tdep.c (m68hc11_register_name): Add gdbarch parameter. (m68hc11_register_reggroup_p): Add gdbarch to call of m68hc11_register_name. * mn10300-tdep.c (mn10300_generic_register_name, am33_register_name) (am33_2_register_name): Add gdbarch parameter. (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current architecture by frame_info. (mn10300_dump_tdep): Replace current_gdbarch by gdbarch. * rs6000-tdep.c (rs6000_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. * score-tdep.c (score_register_name): Add gdbarch parameter. (score_return_value, score_push_dummy_call): Replace current_gdbarch by gdbarch. * sh64-tdep.c (sh64_register_name): Add gdbarch parameter. (sh64_compact_reg_base_num, sh64_register_convert_to_virtual) (sh64_register_convert_to_raw, sh64_fv_reg_base_num) (sh64_dr_reg_base_num, sh64_fpp_reg_base_num): Add gdbarch parameter and update caller. Replace current_gdbarch by gdbarch. (sh64_extract_return_value, sh64_store_return_value): Use get_regcache_arch to get at the current architecture by regcache. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name, sh_sh2a_register_name) (sh_sh2a_nofpu_register_name, sh_sh_dsp_register_name) (sh_sh3_dsp_register_name, sh_sh4_register_name) (sh_sh4_nofpu_register_name, sh_sh4al_dsp_register_name): Add gdbarch parameter. (fv_reg_base_num, dr_reg_base_num, sh_justify_value_in_reg) (sh_next_flt_argreg): Add gdbarch parameter and update caller. Replace current_gdbarch by gdbarch. (sh_extract_return_value_fpu, sh_store_return_value_fpu): Use get_regcache_arch to get at the current architecture by regcache. * sparc-tdep.c (sparc32_register_name): Add gdbarch parameter. * sparc64-tdep.c (sparc64_register_name): Add gdbarch parameter. * v850-tdep.c (v850_register_name, v850e_register_name): Add gdbarch parameter. (v850_unwind_sp, v850_unwind_pc): Replace current_gdbarch by gdbarch. * xtensa-tdep.c (xtensa_register_name): Add gdbarch parameter. Replace current_gdbarch by gdbarch. (xtensa_pseudo_register_read, xtensa_pseudo_register_write) (xtensa_frame_prev_register): Add gdbarch parameter to xtensa_register_name call.
2007-08-23 Switch the license of all .c files to GPLv3.Joel Brobecker1-4/+2
Switch the license of all .h files to GPLv3. Switch the license of all .cc files to GPLv3.
2007-06-182007-06-18 Markus Deuling <deuling@de.ibm.com>Ulrich Weigand1-1/+1
* gdbarch.sh (SP_REGNUM): Replace by gdbarch_sp_regnum. * v850-tdep.c (v850_unwind_sp): Likewise. * std-regs.c (value_of_builtin_frame_sp_reg): Likewise. * stack.c (frame_info): Likewise. * stabsread.c (define_symbol): Likewise. * sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu) (sh_dwarf2_frame_init_reg, sh_frame_cache, sh_frame_prev_register) (sh_unwind_sp): Likewise. * sh64-tdep.c (sh64_push_dummy_call, sh64_frame_cache) (sh64_frame_prev_register, sh64_unwind_sp): Likewise. * rs6000-tdep.c (rs6000_push_dummy_call, rs6000_unwind_dummy_id) (rs6000_frame_cache): Likewise. * rs6000-nat.c (store_register): Likewise. * remote-mips.c (mips_wait): Likewise. * procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call) (ppc64_sysv_abi_push_dummy_call): Likewise. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise. * ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise. * ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise. * ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise. * m32r-rom.c (m32r_supply_register): Likewise. * frame.c (frame_sp_unwind): Likewise. * mips-tdep.c (mips_insn16_frame_cache) (mips_insn32_frame_cache): Likewise (comment). * m68klinux-nat.c (supply_gregset): Likewise. * m68k-tdep.c (m68k_get_longjmp_target): Likewise. * ia64-tdep.c (ia64_frame_prev_register): Likewise. * i386-tdep.c (i386_get_longjmp_target): Likewise. * dwarf2-frame.c (dwarf2_frame_default_init_reg): Likewise. * cris-tdep.c (cris_regnums, cris_sigcontext_addr) (cris_sigtramp_frame_unwind_cache, cris_push_dummy_call) (cris_scan_prologue, crisv32_scan_prologue, cris_unwind_sp) (cris_register_type, crisv32_register_type) (cris_dwarf2_frame_init_reg): Likewise. * arch-utils.c (legacy_virtual_frame_pointer): Likewise. * amd64-tdep.c (amd64_frame_prev_register): Likewise. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Likewise. * libunwind-frame.c (libunwind_frame_cache): Likewise. * gdbarch.sh (PC_REGNUM): Replace by gdbarch_pc_regnum. * regcache.c (read_pc_pid, generic_target_write_pc): Likewise. * xtensa-tdep.c (xtensa_register_type, xtensa_supply_gregset) (xtensa_unwind_pc, xtensa_frame_cache, xtensa_frame_prev_register) (xtensa_extract_return_value, xtensa_store_return_value): Likewise. * v850-tdep.c (v850_unwind_pc): Likewise. * stack.c (frame_info): Likewise. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs) (sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs) (sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs) (sh_dwarf2_frame_init_reg, sh_frame_prev_register, sh_unwind_pc) (sh_dsp_show_regs): Likewise. * shnbsd-tdep.c (shnbsd_supply_gregset) (shnbsd_collect_gregset): Likewise. * shnbsd-nat.c (GETREGS_SUPPLIES): Likewise. * sh64-tdep.c (sh64_compact_reg_base_num, sh64_show_media_regs) (sh64_frame_prev_register, sh64_unwind_pc): Likewise. * rs6000-tdep.c (ppc_supply_gregset, ppc_collect_gregset) (6000_register_reggroup_p, rs6000_unwind_pc) (rs6000_frame_cache): Likewise. * rs6000-nat.c (regmap, rs6000_fetch_inferior_registers) (rs6000_store_inferior_registers): Likewise. * remote-mips.c (mips_wait, mips_load): Likewise. * procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise. * ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise. * ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise. * ppcnbsd-nat.c (getregs_supplies, ppcnbsd_supply_pcb): Likewise. * ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise. * ppc-linux-nat.c (ppc_register_u_addr, fetch_ppc_registers) (store_ppc_registers, fill_gregset): Likewise. * mips-tdep.c (mips_stub_frame_cache, mips_gdbarch_init): Likewise. * mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg): Likewise. * mipsnbsd-nat.c (getregs_supplies): Likewise. * m68k-tdep.c (m68k_register_type, m68k_unwind_pc): Likewise. * m68klinux-nat.c (supply_gregset): Likewise. * irix5-nat.c (fill_gregset): Likewise. * i386-tdep.c (i386_unwind_pc): Likewise. * i386-linux-nat.c (i386_linux_resume): Likewise. * frame.c (get_prev_frame_1): Likewise. * dwarf2-frame.c (dwarf2_frame_default_init_reg): Likewise. * dbug-rom.c (dbug_supply_register): Likewise. * cris-tdep.c (cris_sigtramp_frame_unwind_cache, cris_scan_prologue) (crisv32_scan_prologue, cris_unwind_pc, cris_register_size) (cris_register_type, crisv32_register_type, crisv32_register_name) (cris_dwarf2_frame_init_reg, find_step_target) (cris_software_single_step, cris_supply_gregset) (cris_regnums): Likewise. * alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise. * aix-thread.c (special_register_p, supply_sprs64, supply_sprs32) (fill_sprs64, fill_sprs32, store_regs_user_thread): Likewise. * mips-linux-tdep.c (mips_linux_write_pc): Likewise. * gdbarch.sh (PS_REGNUM): Replace by gdbarch_ps_regnum. * dbug-rom.c (dbug_supply_register): Likewise. * xtensa-tdep.c (xtensa_supply_gregset, xtensa_frame_cache) (xtensa_frame_prev_register, xtensa_push_dummy_call): Likewise. * win32-nat.c (win32_resume): Likewise. * std-regs.c (value_of_builtin_frame_ps_reg) (value_of_builtin_frame_pc_reg): Likewise. * m68k-tdep.c (m68k_register_type): Likewise. * m68klinux-nat.c (supply_gregset): Likewise. * gdbarch.sh (FP0_REGNUM): Replace by gdbarch_fp0_regnum. * sh-tdep.c (sh_extract_return_value_fpu, sh_store_return_value_fpu) (sh2e_show_regs, sh2a_show_regs, sh3e_show_regs, sh4_show_regs) (sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type) (fv_reg_base_num, dr_reg_base_num): Likewise. * sh64-tdep.c (sh64_fv_reg_base_num, sh64_dr_reg_base_num) (sh64_fpp_reg_base_num, sh64_compact_reg_base_num, sh64_push_dummy_call) (sh64_extract_return_value, sh64_store_return_value) (sh64_show_media_regs, sh64_show_compact_regs, sh64_register_type) (sh64_do_fp_register, sh64_media_print_registers_info): Likewise. * procfs.c (procfs_fetch_registers, procfs_store_registers) (invalidate_cache): Likewise. * ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise. * mipsnbsd-tdep.c (mipsnbsd_supply_fpreg) (mipsnbsd_fill_fpreg): Likewise. * mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers) (mipsnbsd_store_inferior_registers): Likewise. * mips-linux-tdep.c (mips_supply_fpregset, mips_fill_fpregset) (mips64_supply_fpregset, mips64_fill_fpregset): Likewise. * mips-linux-nat.c (mips64_linux_register_addr): Likewise. * m68k-tdep.c (m68k_register_type, m68k_convert_register_p): Likewise. * m68klinux-nat.c (getfpregs_supplies, supply_fpregset) (fill_fpregset): Likewise. * irix5-nat.c (supply_fpregset, fill_fpregset): Likewise. * i386-tdep.h (struct_return): Likewise (comment). * i386-nto-tdep.c (i386nto_register_area): Likewise. * go32-nat.c (fetch_register, go32_fetch_registers, store_register) (go32_store_registers): Likewise. * alpha-tdep.c (alpha_next_pc): Likewise. * alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise. * alphabsd-nat.c (alphabsd_fetch_inferior_registers) (alphabsd_store_inferior_registers): Likewise. * core-regset.c (fetch_core_registers): Likewise. * i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise. * gdbarch.c, gdbarch.h: Regenerate.
2007-06-16 * gdbtypes.c (builtin_type_v2_double, builtin_type_v4_float,Ulrich Weigand1-2/+7
builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16, builtin_type_v16_int8, builtin_type_v2_float, builtin_type_v2_int32, builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v4sf, builtin_type_v4si, builtin_type_v16qi, builtin_type_v8qi, builtin_type_v8hi, builtin_type_v4hi, builtin_type_v2si, builtin_type_vec64, builtin_type_vec128): Remove. (init_simd_type): Remove. (init_vector_type): Make global. (build_builtin_type_vec64, build_builtin_type_vec128): Remove. (build_gdbtypes): Do not build vector types. (_initialize_gdbtypes): Do not swap vector types. * gdbtypes.h (builtin_type_v2_double, builtin_type_v4_float, builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16, builtin_type_v16_int8, builtin_type_v2_float, builtin_type_v2_int32, builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v4sf, builtin_type_v4si, builtin_type_v16qi, builtin_type_v8qi, builtin_type_v8hi, builtin_type_v4hi, builtin_type_v2si, builtin_type_vec64, builtin_type_vec128): Remove declarations. (init_vector_type): Add prototype. * i386-tdep.h (struct gdbarch_tdep): Add i386_mmx_type and i386_sse_type members. (i386_mmx_type, i386_sse_type): Change from variables to functions. * i386-tdep.c (i386_mmx_type, i386_sse_type): Remove variables. (i386_init_types): Do not build vector types. (i386_mmx_type, i386_sse_type): New functions. (i386_register_type): Call them instead of using global variables. (i386_gdbarch_init): Use XCALLOC to allocate tdep structure. * amd64-tdep.c (amd64_register_type): Call i386_sse_type instead of using global variable. * rs6000-tdep.h (struct gdbarch_tdep): Add ppc_builtin_type_vec64 and ppc_builtin_type_vec128 members. * rs6000-tdep.c (rs6000_builtin_type_vec64): New function. (rs6000_builtin_type_vec128): Likewise. (rs6000_register_type): Call them instead of using builtin_type_vec64 and builtin_type_vec128. (rs6000_gdbarch_init): Use XCALLOC to allocate tdep structure. * spu-tdep.c (struct gdbarch_tdep): New data type. (spu_builtin_type_vec128): Remove variable. (spu_builtin_type_vec128): New function. (spu_register_type): Call it instead of using global variable. (spu_gdbarch_init): Allocate tdep structure. (spu_init_vector_type): Remove function. (_initialize_spu_tdep): Do not call it.
2007-01-09Copyright updates for 2007.Daniel Jacobowitz1-1/+1
2006-01-21* i386-tdep.c (i386_mxcsr_type): New variable.Mark Kettenis1-0/+1
(i386_init_types): Initialize i386_mxcsr_type. (i386_register_type): Return i386_mxcsr_type for %mxcsr. * i386-tdep.c (i386_mxcsr_type): New extern. * amd64-tdep.c (amd64_register_info): Return i386_mxcsr_type for %mxcsr.
2006-01-18* amd64-tdep.c (amd64_sse_type): Remove.Mark Kettenis1-1/+7
(amd64_register_info): Use i386_eflags_type and i386_sse_type where appropriate. (AMD64_NUM_REGS): Use ARRAY_SIZE. (amd64_register_type): Remove code to build amd_sse_type. * i386-tdep.c (i386_eflag_type): New variable. (i386_mmx_type, i386_sse_type): Make global. (i386_init_types): New function. (i386_build_mmx_type, i386_build_sse_type): Remove functions. (i386_register_type): Return i386_eflag_type, i386_sse_type and i386_mmx_type when appropriate. (_initialize_i386_tdep): Call i386_init_types. * i386-tdep.h (i386_eflags_type, i386_mmx_type, i386_sse_type): Declare extern. Based on a previous patch form Michal Ludvig:
2005-12-19* i386-tdep.h (I386_SEL_RPL, I386_SEL_UPL, I386_SEL_KPL): NewMark Kettenis1-0/+5
defines. * i386obsd-tdep.c: Include "frame-unwind.h" and "trad-frame.h". (i386obsd_tf_reg_offset, i386obsd_trapframe_unwind): New variables. (i386obsd_trapframe_cache, i386obsd_trapframe_this_id) (i386obsd_trapframe_prev_register, i386obsd_trapframe_sniffer): New functions. (i386obsd_init_abi): Append i386obsd_trapframe_sniffer. * Makefile.in (i386obsd-tdep.o): Update dependencies.
2005-12-17 * breakpoint.c:Eli Zaretskii1-3/+3
* arm-tdep.c: * ia64-tdep.c: * i386-tdep.c: * hpread.c: * hppa-tdep.c: * hppa-hpux-tdep.c: * gnu-nat.c: * gdbtypes.c: * gdbarch.h: * gdbarch.c: * eval.c: * dwarf2read.c: * dbxread.c: * copying: * symfile.c: * stabsread.c: * sh64-tdep.c: * sh-tdep.c: * s390-tdep.c: * rs6000-tdep.c: * remote.c: * remote-mips.c: * mips-tdep.c: * mdebugread.c: * linux-nat.c: * infrun.c: * xcoffread.c: * win32-nat.c: * valops.c: * utils.c: * tracepoint.c: * target.c: * symtab.c: * c-exp.y: * ada-valprint.c: * ada-typeprint.c: * ada-lex.l: * ada-lang.h: * ada-lang.c: * ada-exp.y: * alphafbsd-tdep.c: * alphabsd-tdep.h: * alphabsd-tdep.c: * alphabsd-nat.c: * alpha-tdep.h: * alpha-tdep.c: * alpha-osf1-tdep.c: * alpha-nat.c: * alpha-mdebug-tdep.c: * alpha-linux-tdep.c: * alpha-linux-nat.c: * aix-thread.c: * abug-rom.c: * arch-utils.c: * annotate.h: * annotate.c: * amd64obsd-tdep.c: * amd64obsd-nat.c: * amd64nbsd-tdep.c: * amd64nbsd-nat.c: * amd64fbsd-tdep.c: * amd64fbsd-nat.c: * amd64bsd-nat.c: * amd64-tdep.h: * amd64-tdep.c: * amd64-sol2-tdep.c: * amd64-nat.h: * amd64-nat.c: * amd64-linux-tdep.c: * amd64-linux-nat.c: * alphanbsd-tdep.c: * block.h: * block.c: * bfd-target.h: * bfd-target.c: * bcache.h: * bcache.c: * ax.h: * ax-general.c: * ax-gdb.h: * ax-gdb.c: * avr-tdep.c: * auxv.h: * auxv.c: * armnbsd-tdep.c: * armnbsd-nat.c: * arm-tdep.h: * arm-linux-nat.c: * arch-utils.h: * charset.c: * call-cmds.h: * c-valprint.c: * c-typeprint.c: * c-lang.h: * c-lang.c: * buildsym.h: * buildsym.c: * bsd-uthread.h: * bsd-uthread.c: * bsd-kvm.h: * bsd-kvm.c: * breakpoint.h: * core-regset.c: * core-aout.c: * completer.h: * completer.c: * complaints.h: * complaints.c: * command.h: * coffread.c: * coff-solib.h: * coff-solib.c: * coff-pe-read.h: * coff-pe-read.c: * cli-out.h: * cli-out.c: * charset.h: * dink32-rom.c: * dictionary.h: * dictionary.c: * demangle.c: * defs.h: * dcache.h: * dcache.c: * d10v-tdep.c: * cpu32bug-rom.c: * cp-valprint.c: * cp-support.h: * cp-support.c: * cp-namespace.c: * cp-abi.h: * cp-abi.c: * corelow.c: * corefile.c: * environ.c: * elfread.c: * dwarfread.c: * dwarf2loc.c: * dwarf2expr.h: * dwarf2expr.c: * dwarf2-frame.h: * dwarf2-frame.c: * dve3900-rom.c: * dummy-frame.h: * dummy-frame.c: * dsrec.c: * doublest.h: * doublest.c: * disasm.h: * disasm.c: * fork-child.c: * findvar.c: * fbsd-nat.h: * fbsd-nat.c: * f-valprint.c: * f-typeprint.c: * f-lang.h: * f-lang.c: * expression.h: * expprint.c: * exec.h: * exec.c: * exceptions.h: * exceptions.c: * event-top.h: * event-top.c: * event-loop.h: * event-loop.c: * gdb.c: * gdb-stabs.h: * gdb-events.h: * gdb-events.c: * gcore.c: * frv-tdep.h: * frv-tdep.c: * frv-linux-tdep.c: * frame.h: * frame.c: * frame-unwind.h: * frame-unwind.c: * frame-base.h: * frame-base.c: * gdb_vfork.h: * gdb_thread_db.h: * gdb_string.h: * gdb_stat.h: * gdb_regex.h: * gdb_ptrace.h: * gdb_proc_service.h: * gdb_obstack.h: * gdb_locale.h: * gdb_dirent.h: * gdb_curses.h: * gdb_assert.h: * gdbarch.sh: * gdb.h: * hpux-thread.c: * hppabsd-nat.c: * hppa-tdep.h: * hpacc-abi.c: * h8300-tdep.c: * gregset.h: * go32-nat.c: * gnu-v3-abi.c: * gnu-v2-abi.h: * gnu-v2-abi.c: * gnu-nat.h: * glibc-tdep.c: * gdbtypes.h: * gdbcore.h: * gdbcmd.h: * i386nbsd-tdep.c: * i386nbsd-nat.c: * i386gnu-tdep.c: * i386gnu-nat.c: * i386fbsd-tdep.c: * i386fbsd-nat.c: * i386bsd-tdep.c: * i386bsd-nat.h: * i386bsd-nat.c: * i386-tdep.h: * i386-sol2-nat.c: * i386-nto-tdep.c: * i386-nat.c: * i386-linux-tdep.h: * i386-linux-tdep.c: * i386-linux-nat.c: * i386-cygwin-tdep.c: * inf-ttrace.c: * inf-ptrace.h: * inf-ptrace.c: * inf-loop.h: * inf-loop.c: * inf-child.h: * inf-child.c: * ia64-tdep.h: * ia64-linux-nat.c: * i387-tdep.h: * i387-tdep.c: * i386v4-nat.c: * i386v-nat.c: * i386obsd-tdep.c: * i386obsd-nat.c: * kod.c: * jv-valprint.c: * jv-typeprint.c: * jv-lang.h: * jv-lang.c: * irix5-nat.c: * iq2000-tdep.c: * interps.h: * interps.c: * inftarg.c: * inflow.h: * inflow.c: * inferior.h: * infcmd.c: * infcall.h: * infcall.c: * inf-ttrace.h: * m32r-tdep.h: * m32r-tdep.c: * m32r-rom.c: * m32r-linux-tdep.c: * m32r-linux-nat.c: * m2-valprint.c: * m2-typeprint.c: * m2-lang.h: * m2-lang.c: * lynx-nat.c: * linux-thread-db.c: * linux-nat.h: * linespec.c: * libunwind-frame.h: * libunwind-frame.c: * language.h: * language.c: * macroexp.c: * macrocmd.c: * m88kbsd-nat.c: * m88k-tdep.h: * m88k-tdep.c: * m68klinux-tdep.c: * m68klinux-nat.c: * m68kbsd-tdep.c: * m68kbsd-nat.c: * m68k-tdep.h: * m68k-tdep.c: * mips-linux-nat.c: * mips-irix-tdep.c: * minsyms.c: * memattr.h: * memattr.c: * mem-break.c: * mdebugread.h: * main.h: * main.c: * macrotab.h: * macrotab.c: * macroscope.h: * macroscope.c: * macroexp.h: * nbsd-tdep.c: * mt-tdep.c: * monitor.h: * monitor.c: * mn10300-tdep.h: * mn10300-tdep.c: * mn10300-linux-tdep.c: * mipsv4-nat.c: * mipsread.c: * mipsnbsd-tdep.h: * mipsnbsd-tdep.c: * mipsnbsd-nat.c: * mips64obsd-tdep.c: * mips64obsd-nat.c: * mips-tdep.h: * mips-mdebug-tdep.c: * mips-linux-tdep.c: * osabi.h: * osabi.c: * ocd.h: * ocd.c: * observer.c: * objfiles.h: * objfiles.c: * objc-lang.h: * objc-lang.c: * objc-exp.y: * nto-tdep.h: * nto-tdep.c: * nto-procfs.c: * nlmread.c: * nbsd-tdep.h: * ppcobsd-tdep.c: * ppcobsd-nat.c: * ppcnbsd-tdep.h: * ppcnbsd-tdep.c: * ppcnbsd-nat.c: * ppcbug-rom.c: * ppc-tdep.h: * ppc-sysv-tdep.c: * ppc-linux-tdep.c: * ppc-linux-nat.c: * ppc-bdm.c: * parser-defs.h: * parse.c: * p-valprint.c: * p-typeprint.c: * p-lang.h: * p-lang.c: * remote-fileio.h: * remote-fileio.c: * remote-est.c: * remote-e7000.c: * regset.h: * regset.c: * reggroups.h: * reggroups.c: * regcache.h: * regcache.c: * proc-why.c: * proc-service.c: * proc-events.c: * printcmd.c: * ppcobsd-tdep.h: * sentinel-frame.h: * sentinel-frame.c: * scm-valprint.c: * scm-tags.h: * scm-lang.h: * scm-lang.c: * scm-exp.c: * s390-tdep.h: * rom68k-rom.c: * remote.h: * remote-utils.c: * remote-st.c: * remote-sim.c: * remote-sds.c: * remote-rdp.c: * remote-rdi.c: * remote-hms.c: * sim-regno.h: * shnbsd-tdep.h: * shnbsd-tdep.c: * shnbsd-nat.c: * sh-tdep.h: * serial.h: * serial.c: * ser-unix.h: * ser-unix.c: * ser-tcp.c: * ser-pipe.c: * ser-go32.c: * ser-e7kpc.c: * ser-base.h: * ser-base.c: * solib.c: * solib-svr4.h: * solib-svr4.c: * solib-sunos.c: * solib-som.h: * solib-som.c: * solib-pa64.h: * solib-pa64.c: * solib-osf.c: * solib-null.c: * solib-legacy.c: * solib-irix.c: * solib-frv.c: * solib-aix5.c: * sol-thread.c: * sparc64-linux-tdep.c: * sparc64-linux-nat.c: * sparc-tdep.h: * sparc-tdep.c: * sparc-sol2-tdep.c: * sparc-sol2-nat.c: * sparc-nat.h: * sparc-nat.c: * sparc-linux-tdep.c: * sparc-linux-nat.c: * source.h: * source.c: * somread.c: * solist.h: * solib.h: * std-regs.c: * stack.h: * stack.c: * stabsread.h: * sparcobsd-tdep.c: * sparcnbsd-tdep.c: * sparcnbsd-nat.c: * sparc64obsd-tdep.c: * sparc64nbsd-tdep.c: * sparc64nbsd-nat.c: * sparc64fbsd-tdep.c: * sparc64fbsd-nat.c: * sparc64-tdep.h: * sparc64-tdep.c: * sparc64-sol2-tdep.c: * sparc64-nat.c: * ui-file.c: * typeprint.h: * typeprint.c: * tramp-frame.h: * tramp-frame.c: * trad-frame.h: * trad-frame.c: * tracepoint.h: * top.c: * tobs.inc: * thread.c: * terminal.h: * target.h: * symfile.h: * stop-gdb.c: * vaxbsd-nat.c: * vax-tdep.h: * vax-tdep.c: * vax-nat.c: * varobj.h: * varobj.c: * value.h: * value.c: * valprint.h: * valprint.c: * v850-tdep.c: * uw-thread.c: * user-regs.c: * ui-out.h: * ui-out.c: * ui-file.h: * xcoffsolib.h: * xcoffsolib.c: * wrapper.c: * wince.c: * wince-stub.h: * wince-stub.c: * vaxobsd-tdep.c: * vaxnbsd-tdep.c: * gdb_gcore.sh: * copying.c: * configure.ac: * aclocal.m4: * acinclude.m4: * reply_mig_hack.awk: * observer.sh: * gdb_mbuild.sh: * arm-linux-tdep.c: * blockframe.c: * dbug-rom.c: * environ.h: * dwarf2loc.h: * gdb-events.sh: * glibc-tdep.h: * gdb_wait.h: * gdbthread.h: * i386-sol2-tdep.c: * hppabsd-tdep.c: * hppa-linux-nat.c: * hppa-hpux-nat.c: * ia64-linux-tdep.c: * infptrace.c: * linespec.h: * maint.c: * mips-mdebug-tdep.h: * remote-m32r-sdi.c: * s390-nat.c: * rs6000-nat.c: * remote-utils.h: * sh3-rom.c: * sh-linux-tdep.c: * top.h: * symtab.h: * symmisc.c: * symfile-mem.c: * srec.h: * user-regs.h: * version.h: * valarith.c: * xstormy16-tdep.c: * wrapper.h: * Makefile.in: * f-exp.y: * cris-tdep.c: * cp-name-parser.y: * procfs.c: * proc-utils.h: * proc-flags.c: * proc-api.c: * p-exp.y: * m68hc11-tdep.c: * m2-exp.y: * kod.h: * kod-cisco.c: * jv-exp.y: * hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF address.