| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
32-bit x86 arches always the I386_*BASE_REGNUM values. Only code that
needs to support both 64-bit and 32-bit arches needs to use
tdep->fsbase_regnum to compute a segment base register number.
|
|
FreeBSD kernels recently grew a new register core dump note containing
the base addresses of the %fs and %gs segments (corresponding to the
%fsbase and %gsbase registers). Parse this note to permit inspecting
TLS variables in core dumps. Native processes already supported TLS
via older ptrace() operations.
|
|
i386-fbsd-tdep.c and amd64-fbsd-tdep.c failed to build on my x86-64
Fedora 34 machine, using the system gcc, after a recent patch. These
two files now have unused variables, which provokes a warning in this
configuration.
I'm checking in this patch to remove the unused variables.
|
|
Use a register map to describe the registers in mcontext_t as part of
the signal frame as is done on several other FreeBSD arches. This
permits fetching the fsbase and gsbase register values from the signal
frame for both amd64 and i386 and permits fetching additional segment
registers stored as 16-bit values on amd64.
While signal frames on FreeBSD do contain floating point/XSAVE state,
these unwinders do not attempt to supply those registers. The
existing x86 signal frame uwinders do not support these registers, and
the only existing functions which handle FSAVE/FXSAVE/XSAVE state all
work with regcaches. In the future these unwinders could create a
tempory regcache, collect floating point registers, and then supply
values out of the regcache into the trad-frame.
|
|
In particular, this permits reporting the value of the $ds, $es, $fs,
and $gs segment registers from amd64 core dumps since they are stored
as 16-bit values rather than the 32-bit size assumed by i386_gregset.
|
|
A few FreeBSD releases did not include the page holding the signal
code in core dumps. As a workaround, a sysctl was used to fetch the
default location of the signal code instead. The youngest affected
FreeBSD release is 10.1 released in November 2014 and EOLed in
December 2016. The fallback only works for native processes and would
require a separate unwinder once the FreeBSD arches are converted to
use tramp_frame for signal frames.
|
|
The last relevant release (FreeBSD 4.11) was released in January of
2005.
|
|
This was orphaned when a.out support was removed as the FreeBSD/i386
ELF support always used the register layouts from 4.0+.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
|
|
This patch converts the most obvious functions from gdb/frame.h to use
the gdb::array_view abstraction. I've converted the ones that used buffer +
length.
There are others using only the buffer, with an implicit size. I did not
touch those for now. But it would be nice to pass the size for safety.
Tested with --enable-targets=all on Ubuntu 18.04/20.04 aarch64-linux.
gdb/ChangeLog
2021-01-19 Luis Machado <luis.machado@linaro.org>
* frame.h (get_frame_register_bytes): Pass a gdb::array_view instead
of buffer + length.
(put_frame_register_bytes): Likewise.
Adjust documentation.
(get_frame_memory): Pass a gdb::array_view instead of buffer + length.
(safe_frame_unwind_memory): Likewise.
* frame.c (get_frame_register_bytes, put_frame_register_bytes)
(get_frame_memory, safe_frame_unwind_memory): Adjust to use
gdb::array_view.
* amd64-fbsd-tdep.c (amd64fbsd_sigtramp_p): Likewise.
* amd64-linux-tdep.c (amd64_linux_sigtramp_start): Likewise.
* amd64-obsd-tdep.c (amd64obsd_sigtramp_p): Likewise.
* arc-linux-tdep.c (arc_linux_is_sigtramp): Likewise.
* cris-tdep.c (cris_sigtramp_start, cris_rt_sigtramp_start): Likewise.
* dwarf2/loc.c (rw_pieced_value): Likewise.
* hppa-tdep.c (hppa_frame_cache): Likewise.
* i386-fbsd-tdep.c (i386fbsd_sigtramp_p): Likewise.
* i386-gnu-tdep.c (i386_gnu_sigtramp_start): Likewise.
* i386-linux-tdep.c (i386_linux_sigtramp_start)
(i386_linux_rt_sigtramp_start): Likewise.
* i386-obsd-tdep.c (i386obsd_sigtramp_p): Likewise.
* i386-tdep.c (i386_register_to_value): Likewise.
* i387-tdep.c (i387_register_to_value): Likewise.
* ia64-tdep.c (ia64_register_to_value): Likewise.
* m32r-linux-tdep.c (m32r_linux_sigtramp_start)
(m32r_linux_rt_sigtramp_start): Likewise.
* m68k-linux-tdep.c (m68k_linux_pc_in_sigtramp): Likewise.
* m68k-tdep.c (m68k_register_to_value): Likewise.
* mips-tdep.c (mips_register_to_value)
(mips_value_to_register): Likewise.
* ppc-fbsd-tdep.c (ppcfbsd_sigtramp_frame_sniffer)
(ppcfbsd_sigtramp_frame_cache): Likewise.
* ppc-obsd-tdep.c (ppcobsd_sigtramp_frame_sniffer)
(ppcobsd_sigtramp_frame_cache): Likewise.
* rs6000-tdep.c (rs6000_in_function_epilogue_frame_p)
(rs6000_register_to_value): Likewise.
* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
* tramp-frame.c (tramp_frame_start): Likewise.
* valops.c (value_assign): Likewise.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
Derive the pointer to the DTV array from the gs_base register. As
with FreeBSD/amd64, gs_base is currently only available via the native
target.
gdb/ChangeLog:
* i386-fbsd-tdep.c (i386fbsd_get_thread_local_address): New.
(i386fbsd_init_abi): Install gdbarch
"fetch_tls_load_module_address" and "get_thread_local_address"
methods.
|
|
The i386 BSD native target uses the same ptrace operations
(PT_[GS]ET[FG]SBASE) as the amd64 BSD native target to fetch and store
the registers.
The amd64 BSD native now uses 'tdep->fsbase_regnum' instead of
hardcoding AMD64_FSBASE_REGNUM and AMD64_GSBASE_REGNUM to support
32-bit targets. In addition, the store operations explicitly zero the
new register value before fetching it from the register cache to
ensure 32-bit values are zero-extended.
gdb/ChangeLog:
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
tdep->fsbase_regnum instead of constants for fs_base and gs_base.
(amd64bsd_store_inferior_registers): Likewise.
* amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description):
Enable segment base registers.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers): Use
PT_GETFSBASE and PT_GETGSBASE.
(i386bsd_store_inferior_registers): Use PT_SETFSBASE and
PT_SETGSBASE.
* i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Enable
segment base registers.
* i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise.
|
|
As on amd64, these registers hold the base address of the fs and gs
segments, respectively. For i386 these two registers are 32 bits.
gdb/ChangeLog:
* amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description):
Update calls to i386_target_description to add 'segments'
parameter.
* amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't
add segment base registers.
* arch/i386.c (i386_create_target_description): Add 'segments'
parameter to enable segment base registers.
* arch/i386.h (i386_create_target_description): Likewise.
* features/i386/32bit-segments.xml: New file.
* features/i386/32bit-segments.c: Generate.
* i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update
call to i386_target_description to add 'segments' parameter.
* i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise.
* i386-go32-tdep.c (i386_go32_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_read_description): Likewise.
* i386-tdep.c (i386_validate_tdesc_p): Add segment base registers
if feature is present.
(i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs.
Add 'segments' parameter to call to i386_target_description.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
(_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter
to call to i386_target_description.
* i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'.
(enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM.
Define I386_NUM_REGS.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
gdb/gdbserver/ChangeLog:
* linux-x86-tdesc.c (i386_linux_read_description): Update call to
i386_create_target_description for 'segments' parameter.
* lynx-i386-low.c (lynx_i386_arch_setup): Likewise.
* nto-x86-low.c (nto_x86_arch_setup): Likewise.
* win32-i386-low.c (i386_arch_setup): Likewise.
|
|
This changes all includes to use the form "common/filename.h" rather
than just "filename.h". This was written by a script.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* xtensa-linux-nat.c: Fix common/ includes.
* xml-support.h: Fix common/ includes.
* xml-support.c: Fix common/ includes.
* x86-linux-nat.c: Fix common/ includes.
* windows-nat.c: Fix common/ includes.
* varobj.h: Fix common/ includes.
* varobj.c: Fix common/ includes.
* value.c: Fix common/ includes.
* valops.c: Fix common/ includes.
* utils.c: Fix common/ includes.
* unittests/xml-utils-selftests.c: Fix common/ includes.
* unittests/utils-selftests.c: Fix common/ includes.
* unittests/unpack-selftests.c: Fix common/ includes.
* unittests/tracepoint-selftests.c: Fix common/ includes.
* unittests/style-selftests.c: Fix common/ includes.
* unittests/string_view-selftests.c: Fix common/ includes.
* unittests/scoped_restore-selftests.c: Fix common/ includes.
* unittests/scoped_mmap-selftests.c: Fix common/ includes.
* unittests/scoped_fd-selftests.c: Fix common/ includes.
* unittests/rsp-low-selftests.c: Fix common/ includes.
* unittests/parse-connection-spec-selftests.c: Fix common/
includes.
* unittests/optional-selftests.c: Fix common/ includes.
* unittests/offset-type-selftests.c: Fix common/ includes.
* unittests/observable-selftests.c: Fix common/ includes.
* unittests/mkdir-recursive-selftests.c: Fix common/ includes.
* unittests/memrange-selftests.c: Fix common/ includes.
* unittests/memory-map-selftests.c: Fix common/ includes.
* unittests/lookup_name_info-selftests.c: Fix common/ includes.
* unittests/function-view-selftests.c: Fix common/ includes.
* unittests/environ-selftests.c: Fix common/ includes.
* unittests/copy_bitwise-selftests.c: Fix common/ includes.
* unittests/common-utils-selftests.c: Fix common/ includes.
* unittests/cli-utils-selftests.c: Fix common/ includes.
* unittests/array-view-selftests.c: Fix common/ includes.
* ui-file.c: Fix common/ includes.
* tui/tui-io.c: Fix common/ includes.
* tracepoint.h: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* tracefile-tfile.c: Fix common/ includes.
* top.h: Fix common/ includes.
* top.c: Fix common/ includes.
* thread.c: Fix common/ includes.
* target/waitstatus.h: Fix common/ includes.
* target/waitstatus.c: Fix common/ includes.
* target.h: Fix common/ includes.
* target.c: Fix common/ includes.
* target-memory.c: Fix common/ includes.
* target-descriptions.c: Fix common/ includes.
* symtab.h: Fix common/ includes.
* symfile.c: Fix common/ includes.
* stap-probe.c: Fix common/ includes.
* spu-linux-nat.c: Fix common/ includes.
* sparc-nat.c: Fix common/ includes.
* source.c: Fix common/ includes.
* solib.c: Fix common/ includes.
* solib-target.c: Fix common/ includes.
* ser-unix.c: Fix common/ includes.
* ser-tcp.c: Fix common/ includes.
* ser-pipe.c: Fix common/ includes.
* ser-base.c: Fix common/ includes.
* selftest-arch.c: Fix common/ includes.
* s12z-tdep.c: Fix common/ includes.
* rust-exp.y: Fix common/ includes.
* rs6000-aix-tdep.c: Fix common/ includes.
* riscv-tdep.c: Fix common/ includes.
* remote.c: Fix common/ includes.
* remote-notif.h: Fix common/ includes.
* remote-fileio.h: Fix common/ includes.
* remote-fileio.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* record-btrace.c: Fix common/ includes.
* python/python.c: Fix common/ includes.
* python/py-type.c: Fix common/ includes.
* python/py-inferior.c: Fix common/ includes.
* progspace.h: Fix common/ includes.
* producer.c: Fix common/ includes.
* procfs.c: Fix common/ includes.
* proc-api.c: Fix common/ includes.
* printcmd.c: Fix common/ includes.
* ppc-linux-nat.c: Fix common/ includes.
* parser-defs.h: Fix common/ includes.
* osdata.c: Fix common/ includes.
* obsd-nat.c: Fix common/ includes.
* nat/x86-linux.c: Fix common/ includes.
* nat/x86-linux-dregs.c: Fix common/ includes.
* nat/x86-dregs.h: Fix common/ includes.
* nat/x86-dregs.c: Fix common/ includes.
* nat/ppc-linux.c: Fix common/ includes.
* nat/mips-linux-watch.h: Fix common/ includes.
* nat/mips-linux-watch.c: Fix common/ includes.
* nat/linux-waitpid.c: Fix common/ includes.
* nat/linux-ptrace.h: Fix common/ includes.
* nat/linux-ptrace.c: Fix common/ includes.
* nat/linux-procfs.c: Fix common/ includes.
* nat/linux-personality.c: Fix common/ includes.
* nat/linux-osdata.c: Fix common/ includes.
* nat/linux-namespaces.c: Fix common/ includes.
* nat/linux-btrace.h: Fix common/ includes.
* nat/linux-btrace.c: Fix common/ includes.
* nat/fork-inferior.c: Fix common/ includes.
* nat/amd64-linux-siginfo.c: Fix common/ includes.
* nat/aarch64-sve-linux-ptrace.c: Fix common/ includes.
* nat/aarch64-linux.c: Fix common/ includes.
* nat/aarch64-linux-hw-point.h: Fix common/ includes.
* nat/aarch64-linux-hw-point.c: Fix common/ includes.
* namespace.h: Fix common/ includes.
* mips-linux-tdep.c: Fix common/ includes.
* minsyms.c: Fix common/ includes.
* mi/mi-parse.h: Fix common/ includes.
* mi/mi-main.c: Fix common/ includes.
* mi/mi-cmd-env.c: Fix common/ includes.
* memrange.h: Fix common/ includes.
* memattr.c: Fix common/ includes.
* maint.h: Fix common/ includes.
* maint.c: Fix common/ includes.
* main.c: Fix common/ includes.
* machoread.c: Fix common/ includes.
* location.c: Fix common/ includes.
* linux-thread-db.c: Fix common/ includes.
* linux-nat.c: Fix common/ includes.
* linux-fork.c: Fix common/ includes.
* inline-frame.c: Fix common/ includes.
* infrun.c: Fix common/ includes.
* inflow.c: Fix common/ includes.
* inferior.h: Fix common/ includes.
* inferior.c: Fix common/ includes.
* infcmd.c: Fix common/ includes.
* inf-ptrace.c: Fix common/ includes.
* inf-child.c: Fix common/ includes.
* ia64-linux-nat.c: Fix common/ includes.
* i387-tdep.c: Fix common/ includes.
* i386-tdep.c: Fix common/ includes.
* i386-linux-tdep.c: Fix common/ includes.
* i386-linux-nat.c: Fix common/ includes.
* i386-go32-tdep.c: Fix common/ includes.
* i386-fbsd-tdep.c: Fix common/ includes.
* i386-fbsd-nat.c: Fix common/ includes.
* guile/scm-type.c: Fix common/ includes.
* guile/guile.c: Fix common/ includes.
* go32-nat.c: Fix common/ includes.
* gnu-nat.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbarch-selftests.c: Fix common/ includes.
* gdb_usleep.c: Fix common/ includes.
* gdb_select.h: Fix common/ includes.
* gdb_bfd.c: Fix common/ includes.
* gcore.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* findvar.c: Fix common/ includes.
* fbsd-nat.c: Fix common/ includes.
* event-top.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* dwarf2read.c: Fix common/ includes.
* dwarf2loc.c: Fix common/ includes.
* dwarf2-frame.c: Fix common/ includes.
* dwarf-index-cache.c: Fix common/ includes.
* dtrace-probe.c: Fix common/ includes.
* disasm-selftests.c: Fix common/ includes.
* defs.h: Fix common/ includes.
* csky-tdep.c: Fix common/ includes.
* cp-valprint.c: Fix common/ includes.
* cp-support.h: Fix common/ includes.
* cp-support.c: Fix common/ includes.
* corelow.c: Fix common/ includes.
* completer.h: Fix common/ includes.
* completer.c: Fix common/ includes.
* compile/compile.c: Fix common/ includes.
* compile/compile-loc2c.c: Fix common/ includes.
* compile/compile-cplus-types.c: Fix common/ includes.
* compile/compile-cplus-symbols.c: Fix common/ includes.
* command.h: Fix common/ includes.
* cli/cli-dump.c: Fix common/ includes.
* cli/cli-cmds.c: Fix common/ includes.
* charset.c: Fix common/ includes.
* build-id.c: Fix common/ includes.
* btrace.h: Fix common/ includes.
* btrace.c: Fix common/ includes.
* breakpoint.h: Fix common/ includes.
* breakpoint.c: Fix common/ includes.
* ax.h:
(enum agent_op): Fix common/ includes.
* ax-general.c (struct aop_map): Fix common/ includes.
* ax-gdb.c: Fix common/ includes.
* auxv.c: Fix common/ includes.
* auto-load.c: Fix common/ includes.
* arm-tdep.c: Fix common/ includes.
* arch/riscv.c: Fix common/ includes.
* arch/ppc-linux-common.c: Fix common/ includes.
* arch/i386.c: Fix common/ includes.
* arch/arm.c: Fix common/ includes.
* arch/arm-linux.c: Fix common/ includes.
* arch/arm-get-next-pcs.c: Fix common/ includes.
* arch/amd64.c: Fix common/ includes.
* arch/aarch64.c: Fix common/ includes.
* arch/aarch64-insn.c: Fix common/ includes.
* arch-utils.c: Fix common/ includes.
* amd64-windows-tdep.c: Fix common/ includes.
* amd64-tdep.c: Fix common/ includes.
* amd64-sol2-tdep.c: Fix common/ includes.
* amd64-obsd-tdep.c: Fix common/ includes.
* amd64-nbsd-tdep.c: Fix common/ includes.
* amd64-linux-tdep.c: Fix common/ includes.
* amd64-linux-nat.c: Fix common/ includes.
* amd64-fbsd-tdep.c: Fix common/ includes.
* amd64-fbsd-nat.c: Fix common/ includes.
* amd64-dicos-tdep.c: Fix common/ includes.
* amd64-darwin-tdep.c: Fix common/ includes.
* agent.c: Fix common/ includes.
* ada-lang.h: Fix common/ includes.
* ada-lang.c: Fix common/ includes.
* aarch64-tdep.c: Fix common/ includes.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* win32-low.c: Fix common/ includes.
* win32-i386-low.c: Fix common/ includes.
* tracepoint.c: Fix common/ includes.
* thread-db.c: Fix common/ includes.
* target.h: Fix common/ includes.
* symbol.c: Fix common/ includes.
* spu-low.c: Fix common/ includes.
* server.h: Fix common/ includes.
* server.c: Fix common/ includes.
* remote-utils.c: Fix common/ includes.
* regcache.h: Fix common/ includes.
* regcache.c: Fix common/ includes.
* nto-x86-low.c: Fix common/ includes.
* notif.h: Fix common/ includes.
* mem-break.h: Fix common/ includes.
* lynx-low.c: Fix common/ includes.
* lynx-i386-low.c: Fix common/ includes.
* linux-x86-tdesc-selftest.c: Fix common/ includes.
* linux-x86-low.c: Fix common/ includes.
* linux-low.c: Fix common/ includes.
* inferiors.h: Fix common/ includes.
* i387-fp.c: Fix common/ includes.
* hostio.c: Fix common/ includes.
* hostio-errno.c: Fix common/ includes.
* gdbthread.h: Fix common/ includes.
* gdbreplay.c: Fix common/ includes.
* fork-child.c: Fix common/ includes.
* event-loop.c: Fix common/ includes.
* ax.c:
(enum gdb_agent_op): Fix common/ includes.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
In the existing code, when using the regset section iteration functions, the
size parameter is used in different ways.
With collect, size is used to create the buffer in which to write the regset.
(see linux-tdep.c::linux_collect_regset_section_cb).
With supply, size is used to confirm the existing regset is the correct size.
If REGSET_VARIABLE_SIZE is set then the regset can be bigger than size.
Effectively, size is the minimum possible size of the regset.
(see corelow.c::get_core_register_section).
There are currently no targets with both REGSET_VARIABLE_SIZE and a collect
function.
In SVE, a corefile can contain one of two formats after the header, both of
which are different sizes. However, when writing a core file, we always want
to write out the full bigger size.
To allow support of collects for REGSET_VARIABLE_SIZE we need two sizes.
This is done by adding supply_size and collect_size.
gdb/
* aarch64-fbsd-tdep.c
(aarch64_fbsd_iterate_over_regset_sections): Add supply_size and
collect_size.
* aarch64-linux-tdep.c
(aarch64_linux_iterate_over_regset_sections): Likewise.
* alpha-linux-tdep.c
(alpha_linux_iterate_over_regset_sections):
* alpha-nbsd-tdep.c
(alphanbsd_iterate_over_regset_sections): Likewise.
* amd64-fbsd-tdep.c
(amd64fbsd_iterate_over_regset_sections): Likewise.
* amd64-linux-tdep.c
(amd64_linux_iterate_over_regset_sections): Likewise.
* arm-bsd-tdep.c
(armbsd_iterate_over_regset_sections): Likewise.
* arm-fbsd-tdep.c
(arm_fbsd_iterate_over_regset_sections): Likewise.
* arm-linux-tdep.c
(arm_linux_iterate_over_regset_sections): Likewise.
* corelow.c (get_core_registers_cb): Likewise.
(core_target::fetch_registers): Likewise.
* fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise.
* frv-linux-tdep.c (frv_linux_iterate_over_regset_sections): Likewise.
* gdbarch.h (void): Regenerate.
* gdbarch.sh: Add supply_size and collect_size.
* hppa-linux-tdep.c (hppa_linux_iterate_over_regset_sections): Likewise.
* hppa-nbsd-tdep.c (hppanbsd_iterate_over_regset_sections): Likewise.
* hppa-obsd-tdep.c (hppaobsd_iterate_over_regset_sections): Likewise.
* i386-fbsd-tdep.c (i386fbsd_iterate_over_regset_sections): Likewise.
* i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): Likewise.
* i386-tdep.c (i386_iterate_over_regset_sections): Likewise.
* ia64-linux-tdep.c (ia64_linux_iterate_over_regset_sections): Likewise.
* linux-tdep.c (linux_collect_regset_section_cb): Likewise.
* m32r-linux-tdep.c (m32r_linux_iterate_over_regset_sections): Likewise.
* m68k-bsd-tdep.c (m68kbsd_iterate_over_regset_sections): Likewise.
* m68k-linux-tdep.c (m68k_linux_iterate_over_regset_sections): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_iterate_over_regset_sections): Likewise.
* mips-linux-tdep.c (mips_linux_iterate_over_regset_sections): Likewise.
* mips-nbsd-tdep.c (mipsnbsd_iterate_over_regset_sections): Likewise.
* mips64-obsd-tdep.c (mips64obsd_iterate_over_regset_sections): Likewise.
* mn10300-linux-tdep.c (am33_iterate_over_regset_sections): Likewise.
* nios2-linux-tdep.c (nios2_iterate_over_regset_sections): Likewise.
* ppc-fbsd-tdep.c (ppcfbsd_iterate_over_regset_sections): Likewise.
* ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections): Likewise.
* ppc-nbsd-tdep.c (ppcnbsd_iterate_over_regset_sections): Likewise.
* ppc-obsd-tdep.c (ppcobsd_iterate_over_regset_sections): Likewise.
* riscv-linux-tdep.c (riscv_linux_iterate_over_regset_sections): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_iterate_over_regset_sections): Likewise.
* s390-linux-tdep.c (s390_iterate_over_regset_sections): Likewise.
* score-tdep.c (score7_linux_iterate_over_regset_sections): Likewise.
* sh-tdep.c (sh_iterate_over_regset_sections): Likewise.
* sparc-tdep.c (sparc_iterate_over_regset_sections): Likewise.
* tilegx-linux-tdep.c (tilegx_iterate_over_regset_sections): Likewise.
* vax-tdep.c (vax_iterate_over_regset_sections): Likewise.
* xtensa-tdep.c (xtensa_iterate_over_regset_sections): Likewise.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
These prototypes were required when compiling GDB as C but are not
required for C++.
gdb/ChangeLog:
* aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat
prototype.
* aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep
prototype.
* aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep
prototype.
* aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype.
* ada-exp.y: Remove _initialize_ada_exp prototype.
* ada-lang.c: Remove _initialize_ada_language prototype.
* ada-tasks.c: Remove _initialize_tasks prototype.
* addrmap.c: Remove _initialize_addrmap prototype.
* agent.c: Remove _initialize_agent prototype.
* aix-thread.c: Remove _initialize_aix_thread prototype.
* alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype.
* alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype.
* alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep
prototype.
* alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype.
* alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype.
* alpha-tdep.c: Remove _initialize_alpha_tdep prototype.
* amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep
prototype.
* amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep
prototype.
* amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype.
* amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype.
* amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype.
* amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep
prototype.
* amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype.
* amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype.
* amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype.
* amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype.
* amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* amd64-tdep.c: Remove _initialize_amd64_tdep prototype.
* amd64-windows-nat.c: Remove _initialize_amd64_windows_nat
prototype.
* amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep
prototype.
* annotate.c: Remove _initialize_annotate prototype.
* arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype.
* arc-tdep.c: Remove _initialize_arc_tdep prototype.
* arch-utils.c: Remove _initialize_gdbarch_utils prototype.
* arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype.
* arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype.
* arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype.
* arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype.
* arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep
prototype.
* arm-tdep.c: Remove _initialize_arm_tdep prototype.
* arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype.
* auto-load.c: Remove _initialize_auto_load prototype.
* auxv.c: Remove _initialize_auxv prototype.
* avr-tdep.c: Remove _initialize_avr_tdep prototype.
* ax-gdb.c: Remove _initialize_ax_gdb prototype.
* bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype.
* bfin-tdep.c: Remove _initialize_bfin_tdep prototype.
* break-catch-sig.c: Remove _initialize_break_catch_sig prototype.
* break-catch-syscall.c: Remove _initialize_break_catch_syscall
prototype.
* break-catch-throw.c: Remove _initialize_break_catch_throw
prototype.
* breakpoint.c: Remove _initialize_breakpoint prototype.
* bsd-uthread.c: Remove _initialize_bsd_uthread prototype.
* btrace.c: Remove _initialize_btrace prototype.
* charset.c: Remove _initialize_charset prototype.
* cli/cli-cmds.c: Remove _initialize_cli_cmds prototype.
* cli/cli-dump.c: Remove _initialize_cli_dump prototype.
* cli/cli-interp.c: Remove _initialize_cli_interp prototype.
* cli/cli-logging.c: Remove _initialize_cli_logging prototype.
* cli/cli-script.c: Remove _initialize_cli_script prototype.
* coff-pe-read.c: Remove _initialize_coff_pe_read prototype.
* coffread.c: Remove _initialize_coffread prototype.
* compile/compile.c: Remove _initialize_compile prototype.
* complaints.c: Remove _initialize_complaints prototype.
* completer.c: Remove _initialize_completer prototype.
* copying.awk: Remove _initialize_copying prototype.
* copying.c: Regenerate.
* core-regset.c: Remove _initialize_core_regset prototype.
* corefile.c: Remove _initialize_core prototype.
* corelow.c: Remove _initialize_corelow prototype.
* cp-abi.c: Remove _initialize_cp_abi prototype.
* cp-namespace.c: Remove _initialize_cp_namespace prototype.
* cp-support.c: Remove _initialize_cp_support prototype.
* cp-valprint.c: Remove _initialize_cp_valprint prototype.
* cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype.
* cris-tdep.c: Remove _initialize_cris_tdep prototype.
* ctf.c: Remove _initialize_ctf prototype.
* d-lang.c: Remove _initialize_d_language prototype.
* darwin-nat-info.c: Remove _initialize_darwin_info_commands
prototype.
* darwin-nat.c: Remove _initialize_darwin_inferior prototype.
* dbxread.c: Remove _initialize_dbxread prototype.
* dcache.c: Remove _initialize_dcache prototype.
* demangle.c: Remove _initialize_demangler prototype.
* disasm-selftests.c: Remove _initialize_disasm_selftests
prototype.
* disasm.c: Remove _initialize_disasm prototype.
* dtrace-probe.c: Remove _initialize_dtrace_probe prototype.
* dummy-frame.c: Remove _initialize_dummy_frame prototype.
* dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame
prototype.
* dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype.
* dwarf2expr.c: Remove _initialize_dwarf2expr prototype.
* dwarf2loc.c: Remove _initialize_dwarf2loc prototype.
* dwarf2read.c: Remove _initialize_dwarf2_read prototype.
* elfread.c: Remove _initialize_elfread prototype.
* exec.c: Remove _initialize_exec prototype.
* extension.c: Remove _initialize_extension prototype.
* f-lang.c: Remove _initialize_f_language prototype.
* f-valprint.c: Remove _initialize_f_valprint prototype.
* fbsd-nat.c: Remove _initialize_fbsd_nat prototype.
* fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype.
* filesystem.c: Remove _initialize_filesystem prototype.
* findcmd.c: Remove _initialize_mem_search prototype.
* fork-child.c: Remove _initialize_fork_child prototype.
* frame-base.c: Remove _initialize_frame_base prototype.
* frame-unwind.c: Remove _initialize_frame_unwind prototype.
* frame.c: Remove _initialize_frame prototype.
* frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype.
* frv-tdep.c: Remove _initialize_frv_tdep prototype.
* ft32-tdep.c: Remove _initialize_ft32_tdep prototype.
* gcore.c: Remove _initialize_gcore prototype.
* gdb_bfd.c: Remove _initialize_gdb_bfd prototype.
* gdbarch.c: Regenerate.
* gdbarch.sh: Remove _initialize_gdbarch prototype.
* gdbtypes.c: Remove _initialize_gdbtypes prototype.
* gnu-nat.c: Remove _initialize_gnu_nat prototype.
* gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype.
* gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype.
* go-lang.c: Remove _initialize_go_language prototype.
* go32-nat.c: Remove _initialize_go32_nat prototype.
* guile/guile.c: Remove _initialize_guile prototype.
* h8300-tdep.c: Remove _initialize_h8300_tdep prototype.
* hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype.
* hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype.
* hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype.
* hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype.
* hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype.
* hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype.
* hppa-tdep.c: Remove _initialize_hppa_tdep prototype.
* i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype.
* i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep
prototype.
* i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep
prototype.
* i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype.
* i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype.
* i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype.
* i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype.
* i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype.
* i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype.
* i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype.
* i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype.
* i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype.
* i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype.
* i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype.
* i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype.
* i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype.
* i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype.
* i386-tdep.c: Remove _initialize_i386_tdep prototype.
* i386-windows-nat.c: Remove _initialize_i386_windows_nat
prototype.
* ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame
prototype.
* ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype.
* ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype.
* ia64-tdep.c: Remove _initialize_ia64_tdep prototype.
* ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype.
* infcall.c: Remove _initialize_infcall prototype.
* infcmd.c: Remove _initialize_infcmd prototype.
* inferior.c: Remove _initialize_inferiors prototype.
* inflow.c: Remove _initialize_inflow prototype.
* infrun.c: Remove _initialize_infrun prototype.
* interps.c: Remove _initialize_interpreter prototype.
* iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype.
* jit.c: Remove _initialize_jit prototype.
* language.c: Remove _initialize_language prototype.
* linux-fork.c: Remove _initialize_linux_fork prototype.
* linux-nat.c: Remove _initialize_linux_nat prototype.
* linux-tdep.c: Remove _initialize_linux_tdep prototype.
* linux-thread-db.c: Remove _initialize_thread_db prototype.
* lm32-tdep.c: Remove _initialize_lm32_tdep prototype.
* m2-lang.c: Remove _initialize_m2_language prototype.
* m32c-tdep.c: Remove _initialize_m32c_tdep prototype.
* m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype.
* m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype.
* m32r-tdep.c: Remove _initialize_m32r_tdep prototype.
* m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype.
* m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype.
* m68k-tdep.c: Remove _initialize_m68k_tdep prototype.
* m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype.
* m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype.
* machoread.c: Remove _initialize_machoread prototype.
* macrocmd.c: Remove _initialize_macrocmd prototype.
* macroscope.c: Remove _initialize_macroscope prototype.
* maint.c: Remove _initialize_maint_cmds prototype.
* mdebugread.c: Remove _initialize_mdebugread prototype.
* memattr.c: Remove _initialize_mem prototype.
* mep-tdep.c: Remove _initialize_mep_tdep prototype.
* mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype.
* mi/mi-cmds.c: Remove _initialize_mi_cmds prototype.
* mi/mi-interp.c: Remove _initialize_mi_interp prototype.
* mi/mi-main.c: Remove _initialize_mi_main prototype.
* microblaze-linux-tdep.c: Remove
_initialize_microblaze_linux_tdep prototype.
* microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype.
* mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype.
* mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype.
* mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype.
* mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype.
* mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype.
* mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype.
* mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype.
* mips-tdep.c: Remove _initialize_mips_tdep prototype.
* mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype.
* mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep
prototype.
* mipsread.c: Remove _initialize_mipsread prototype.
* mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep
prototype.
* mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype.
* moxie-tdep.c: Remove _initialize_moxie_tdep prototype.
* msp430-tdep.c: Remove _initialize_msp430_tdep prototype.
* mt-tdep.c: Remove _initialize_mt_tdep prototype.
* nds32-tdep.c: Remove _initialize_nds32_tdep prototype.
* nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep
prototype.
* nios2-tdep.c: Remove _initialize_nios2_tdep prototype.
* nto-procfs.c: Remove _initialize_procfs prototype.
* nto-tdep.c: Remove _initialize_nto_tdep prototype.
* objc-lang.c: Remove _initialize_objc_language prototype.
* objfiles.c: Remove _initialize_objfiles prototype.
* observer.c: Remove observer_test_first_notification_function,
observer_test_second_notification_function,
observer_test_third_notification_function, and
_initialize_observer prototypes.
* opencl-lang.c: Remove _initialize_opencl_language prototypes.
* osabi.c: Remove _initialize_gdb_osabi prototype.
* osdata.c: Remove _initialize_osdata prototype.
* p-valprint.c: Remove _initialize_pascal_valprint prototype.
* parse.c: Remove _initialize_parse prototype.
* ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype.
* ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype.
* ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype.
* ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype.
* ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype.
* ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype.
* ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype.
* ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype.
* printcmd.c: Remove _initialize_printcmd prototype.
* probe.c: Remove _initialize_probe prototype.
* proc-api.c: Remove _initialize_proc_api prototype.
* proc-events.c: Remove _initialize_proc_events prototype.
* proc-service.c: Remove _initialize_proc_service prototype.
* procfs.c: Remove _initialize_procfs prototype.
* psymtab.c: Remove _initialize_psymtab prototype.
* python/python.c: Remove _initialize_python prototype.
* ravenscar-thread.c: Remove _initialize_ravenscar prototype.
* record-btrace.c: Remove _initialize_record_btrace prototype.
* record-full.c: Remove _initialize_record_full prototype.
* record.c: Remove _initialize_record prototype.
* regcache.c: Remove _initialize_regcache prototype.
* reggroups.c: Remove _initialize_reggroup prototype.
* remote-notif.c: Remove _initialize_notif prototype.
* remote-sim.c: Remove _initialize_remote_sim prototype.
* remote.c: Remove _initialize_remote prototype.
* reverse.c: Remove _initialize_reverse prototype.
* rl78-tdep.c: Remove _initialize_rl78_tdep prototype.
* rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype.
* rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep
prototype.
* rs6000-nat.c: Remove _initialize_rs6000_nat prototype.
* rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype.
* rust-exp.y: Remove _initialize_rust_exp prototype.
* rx-tdep.c: Remove _initialize_rx_tdep prototype.
* s390-linux-nat.c: Remove _initialize_s390_nat prototype.
* s390-linux-tdep.c: Remove _initialize_s390_tdep prototype.
* score-tdep.c: Remove _initialize_score_tdep prototype.
* selftest-arch.c: Remove _initialize_selftests_foreach_arch
prototype.
* ser-go32.c: Remove _initialize_ser_dos prototype.
* ser-mingw.c: Remove _initialize_ser_windows prototype.
* ser-pipe.c: Remove _initialize_ser_pipe prototype.
* ser-tcp.c: Remove _initialize_ser_tcp prototype.
* ser-unix.c: Remove _initialize_ser_hardwire prototype.
* serial.c: Remove _initialize_serial prototype.
* sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype.
* sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype.
* sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype.
* sh-tdep.c: Remove _initialize_sh_tdep prototype.
* skip.c: Remove _initialize_step_skip prototype.
* sol-thread.c: Remove _initialize_sol_thread prototype.
* solib-aix.c: Remove _initialize_solib_aix prototype.
* solib-darwin.c: Remove _initialize_darwin_solib prototype.
* solib-dsbt.c: Remove _initialize_dsbt_solib prototype.
* solib-frv.c: Remove _initialize_frv_solib prototype.
* solib-spu.c: Remove _initialize_spu_solib prototype.
* solib-svr4.c: Remove _initialize_svr4_solib prototype.
* solib-target.c: Remove _initialize_solib_target prototype.
* solib.c: Remove _initialize_solib prototype.
* source.c: Remove _initialize_source prototype.
* sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype.
* sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep
prototype.
* sparc-nat.c: Remove _initialize_sparc_nat prototype.
* sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype.
* sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype.
* sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep
prototype.
* sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype.
* sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype.
* sparc-tdep.c: Remove _initialize_sparc_tdep prototype.
* sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat
prototype.
* sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep
prototype.
* sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat
prototype.
* sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep
prototype.
* sparc64-nat.c: Remove _initialize_sparc64_nat prototype.
* sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat
prototype.
* sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep
prototype.
* sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat
prototype.
* sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep
prototype.
* sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep
prototype.
* spu-linux-nat.c: Remove _initialize_spu_nat prototype.
* spu-multiarch.c: Remove _initialize_spu_multiarch prototype.
* spu-tdep.c: Remove _initialize_spu_tdep prototype.
* stabsread.c: Remove _initialize_stabsread prototype.
* stack.c: Remove _initialize_stack prototype.
* stap-probe.c: Remove _initialize_stap_probe prototype.
* std-regs.c: Remove _initialize_frame_reg prototype.
* symfile-debug.c: Remove _initialize_symfile_debug prototype.
* symfile-mem.c: Remove _initialize_symfile_mem prototype.
* symfile.c: Remove _initialize_symfile prototype.
* symmisc.c: Remove _initialize_symmisc prototype.
* symtab.c: Remove _initialize_symtab prototype.
* target-dcache.c: Remove _initialize_target_dcache prototype.
* target-descriptions.c: Remove _initialize_target_descriptions
prototype.
* thread.c: Remove _initialize_thread prototype.
* tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep
prototype.
* tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype.
* tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype.
* tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep
prototype.
* tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype.
* tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype.
* tracefile.c: Remove _initialize_tracefile prototype.
* tracepoint.c: Remove _initialize_tracepoint prototype.
* tui/tui-hooks.c: Remove _initialize_tui_hooks prototype.
* tui/tui-interp.c: Remove _initialize_tui_interp prototype.
* tui/tui-layout.c: Remove _initialize_tui_layout prototype.
* tui/tui-regs.c: Remove _initialize_tui_regs prototype.
* tui/tui-stack.c: Remove _initialize_tui_stack prototype.
* tui/tui-win.c: Remove _initialize_tui_win prototype.
* tui/tui.c: Remove _initialize_tui prototype.
* typeprint.c: Remove _initialize_typeprint prototype.
* user-regs.c: Remove _initialize_user_regs prototype.
* utils.c: Remove _initialize_utils prototype.
* v850-tdep.c: Remove _initialize_v850_tdep prototype.
* valarith.c: Remove _initialize_valarith prototype.
* valops.c: Remove _initialize_valops prototype.
* valprint.c: Remove _initialize_valprint prototype.
* value.c: Remove _initialize_values prototype.
* varobj.c: Remove _initialize_varobj prototype.
* vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype.
* vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype.
* vax-tdep.c: Remove _initialize_vax_tdep prototype.
* windows-nat.c: Remove _initialize_windows_nat,
_initialize_check_for_gdb_ini, and _initialize_loadable
prototypes.
* windows-tdep.c: Remove _initialize_windows_tdep prototype.
* xcoffread.c: Remove _initialize_xcoffread prototype.
* xml-support.c: Remove _initialize_xml_support prototype.
* xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype.
* xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat
prototype.
* xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep
prototype.
* xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype.
|
|
i386fbsd_core_read_xcr0 reads the value of xcr0 from the corefile. If
it fails, returns 0. This makes its caller {i386,amd64}_target_description
has to handle this special value. IMO, i386fbsd_core_read_xcr0 should
return the default xcr0 in case of error.
gdb:
2017-09-04 Yao Qi <yao.qi@linaro.org>
* i386-fbsd-tdep.c (i386fbsd_core_read_xcr0): Return
X86_XSTATE_SSE_MASK instead of 0.
|
|
The bsd-uthread target supports an old thread library ("libc_r") that
was last included in FreeBSD release 6.4 released in 2008. However,
this library has not been used as the default library since FreeBSD
5.0 (2003) and 4.11 (2005). Thread support for modern FreeBSD binaries
is provided via "normal" LWP support in core files and the native
FreeBSD target.
gdb/ChangeLog:
* amd64-fbsd-tdep.c: Remove "bsd-uthread.h" include.
(amd64fbsd_jmp_buf_reg_offset): Remove.
(amd64fbsd_supply_uthread): Remove function.
(amd64fbsd_collect_uthread): Remove function.
(amd64fbsd_init_abi): Don't set bsd-uthread callbacks.
* configure.tgt (i[34567]86-*-freebsd*): Remove bsd-uthread.o.
(x86_64-*-freebsd*): Remove bsd-uthread.o.
(fbsd-nat.c): Update comment.
* i386-fbsd-tdep.c: Remove "bsd-uthread.h" include.
(i386fbsd_jmp_buf_reg_offset): Remove.
(i386fbsd_supply_uthread): Remove function.
(i386fbsd_collect_uthread): Remove function.
(i386fbsd_init_abi): Don't set bsd-uthread callbacks.
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
2016-12-09 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove vax-obsd-tdep.o.
* alpha-fbsd-tdep.c (_initialize_alphafbsd_tdep): Adjust.
* alpha-nbsd-tdep.c: Move comment to _initialize_alphanbsd_tdep.
(alphanbsd_core_osabi_sniffer): Delete.
(_initialize_alphanbsd_tdep): No longer handle a.out.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Adjust.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Adjust.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Adjust.
* amd64-obsd-tdep.c (amd64obsd_supply_regset)
(amd64obsd_combined_regset)
(amd64obsd_iterate_over_regset_sections, amd64obsd_core_init_abi):
Delete.
(_initialize_amd64obsd_tdep): Don't handle a.out.
* arm-nbsd-nat.c (struct md_core, fetch_core_registers)
(arm_netbsd_core_fns): Delete.
(_initialize_arm_netbsd_nat): Don't register arm_netbsd_core_fns.
* arm-nbsd-tdep.c (arm_netbsd_aout_init_abi)
(arm_netbsd_aout_osabi_sniffer): Delete.
(_initialize_arm_netbsd_tdep): Don't handle a.out.
* arm-obsd-tdep.c (armobsd_core_osabi_sniffer): Delete.
(_initialize_armobsd_tdep): Don't handle a.out.
* arm-tdep.c (arm_gdbarch_init): Remove bfd_target_aout_flavour
case.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Remove
SunOS a.out handling.
* configure.tgt (vax-*-netbsd* | vax-*-knetbsd*-gnu): Remove
vax-obsd-tdep.o from gdb_target_objs.
(vax-*-openbsd*): Likewise.
(*-*-freebsd*): Adjust default gdb_osabi.
(*-*-openbsd*): Likewise.
* dbxread.c (block_address_function_relative): Delete.
(dbx_symfile_read): Remove reference to
block_address_function_relative.
(dbx_symfile_read): Don't call read_dbx_dynamic_symtab.
(read_dbx_dynamic_symtab): Delete.
(process_one_symbol): Remove references to
block_address_function_relative.
* defs.h (GDB_OSABI_FREEBSD_AOUT, GDB_OSABI_NETBSD_AOUT): Remove.
(GDB_OSABI_FREEBSD_ELF): Rename to ...
(GDB_OSABI_FREEBSD): ... this.
(GDB_OSABI_NETBSD_ELF): Rename to ...
(GDB_OSABI_NETBSD): ... this.
(GDB_OSABI_OPENBSD_ELF): Rename to ...
(GDB_OSABI_OPENBSD): ... this.
(GDB_OSABI_HPUX_ELF, GDB_OSABI_HPUX_SOM): Remove.
* fbsd-tdep.c: Adjust comment.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Adjust.
* hppa-obsd-tdep.c (GDB_OSABI_NETBSD_CORE): Delete.
(hppaobsd_core_osabi_sniffer): Delete.
(_initialize_hppabsd_tdep): Don't handle a.out.
* hppa-tdep.c (hppa_stub_frame_unwind_cache): Don't handle
GDB_OSABI_HPUX_SOM.
(hppa_gdbarch_init): Likewise.
* i386-bsd-tdep.c (i386bsd_aout_osabi_sniffer)
(i386bsd_core_osabi_sniffer, _initialize_i386bsd_tdep): Delete.
* i386-fbsd-tdep.c (i386fbsdaout_init_abi): Delete. Merge bits
with ...
(i386fbsd_init_abi): ... this.
(_initialize_i386fbsd_tdep): Don't handle a.out.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Adjust.
* i386-obsd-tdep.c (i386obsd_aout_supply_regset)
(i386obsd_aout_gregset)
(i386obsd_aout_iterate_over_regset_sections): Delete.
(i386obsd_init_abi): Merge with i386obsd_elf_init_abi.
(i386obsd_aout_init_abi): Delete.
(_initialize_i386obsd_tdep): Don't handle a.out.
* m68k-bsd-tdep.c (m68kobsd_sigtramp_cache_init)
(m68kobsd_sigtramp): Delete.
(m68kbsd_init_abi): Merge with ...
(m68kbsd_elf_init_abi): ... this, and delete it.
(m68kbsd_aout_init_abi): Delete.
(m68kbsd_aout_osabi_sniffer, m68kbsd_core_osabi_sniffer): Delete.
(_initialize_m68kbsd_tdep): Don't handle a.out.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Adjust.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Adjust.
* osabi.c (gdb_osabi_names): Remove "a.out" entries. Drop "ELF"
suffixes. Remove "HP-UX" entries.
(generic_elf_osabi_sniff_abi_tag_sections): Adjust.
(generic_elf_osabi_sniffer): No longer handle GDB_OSABI_HPUX_ELF.
Adjust.
(_initialize_ppcfbsd_tdep): Adjust.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Adjust.
* ppc-obsd-tdep.c (GDB_OSABI_NETBSD_CORE)
(ppcobsd_core_osabi_sniffer): Delete.
(_initialize_ppcobsd_tdep): Don't handle a.out.
* rs6000-tdep.c (rs6000_gdbarch_init): Adjust.
* sh-nbsd-tdep.c (GDB_OSABI_NETBSD_CORE)
(shnbsd_core_osabi_sniffer): Delete.
(_initialize_shnbsd_tdep): Don't handle a.out.
* solib.c (clear_solib): Don't handle SunOS/a.out.
* sparc-nbsd-tdep.c (sparc32nbsd_init_abi): Make extern.
(sparc32nbsd_aout_init_abi): Delete.
(sparc32nbsd_elf_init_abi): Merged into sparc32nbsd_init_abi.
(sparcnbsd_aout_osabi_sniffer): Delete.
(GDB_OSABI_NETBSD_CORE, sparcnbsd_core_osabi_sniffer): Delete.
(_initialize_sparcnbsd_tdep): No longer handle a.out.
* sparc-obsd-tdep.c (sparc32obsd_init_abi)
(_initialize_sparc32obsd_tdep): Adjust.
* sparc-tdep.h (sparc32nbsd_elf_init_abi): Rename to ...
(sparc32nbsd_init_abi): ... this.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Adjust.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Adjust.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Adjust.
* stabsread.c: Update comment.
* symmisc.c (print_objfile_statistics): Don't mention "a.out" in
output.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Adjust.
* vax-obsd-tdep.c: Delete file.
|
|
Most tdep/nat files are named:
<cpu>-<os>-tdep.c
<cpu>-<os>-nat.c
A few files do not respect this scheme. This patch renames them so that
they are consistent with the rest of the files. It builds fine with
--enable-targets=all, but that doesn't test the nat files. I can only
hope that my grep skill is good enough.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS, ALL_TARGET_OBS,
HFILES_NO_SRCDIR, ALLDEPFILES): Rename files.
* alphabsd-nat.c: Rename to ...
* alpha-bsd-nat.c: ... this, adjust include.
* alphabsd-tdep.c: Rename to ...
* alpha-bsd-tdep.c: ... this, adjust include.
* alphabsd-tdep.h: Rename to ...
* alpha-bsd-tdep.h: ... this, adjust include barrier and comment.
* alphafbsd-tdep.c: Rename to ...
* alpha-fbsd-tdep.c: ... this.
* alphanbsd-tdep.c: Rename to ...
* alpha-nbsd-tdep.c: ... this, adjust include.
* alphaobsd-tdep.c: Rename to ...
* alpha-obsd-tdep.c: ... this, adjust include.
* amd64bsd-nat.c: Rename to ...
* amd64-bsd-nat.c: ... this, adjust include.
* amd64fbsd-nat.c: Rename to ...
* amd64-fbsd-nat.c: ... this, adjust include.
* amd64fbsd-tdep.c: Rename to ...
* amd64-fbsd-tdep.c: ... this, adjust include.
* amd64nbsd-nat.c: Rename to ...
* amd64-nbsd-nat.c: ... this.
* amd64nbsd-tdep.c: Rename to ...
* amd64-nbsd-tdep.c: ... this.
* amd64obsd-nat.c: Rename to ...
* amd64-obsd-nat.c: ... this.
* amd64obsd-tdep.c: Rename to ...
* amd64-obsd-tdep.c: ... this.
* amd64-tdep.h: Update comments.
* armbsd-tdep.c: Rename to ...
* arm-bsd-tdep.c: ... this.
* armnbsd-nat.c: Rename to ...
* arm-nbsd-nat.c: ... this.
* armnbsd-tdep.c: Rename to ...
* arm-nbsd-tdep.c: ... this.
* armobsd-tdep.c: Rename to ...
* arm-obsd-tdep.c: ... this.
* arm-tdep.h: Update comments.
* hppabsd-tdep.c: Rename to ...
* hppa-bsd-tdep.c: ... this, adjust include.
* hppabsd-tdep.h: Rename to ...
* hppa-bsd-tdep.h: ... this, adjust include barrier and comment.
* hppanbsd-nat.c: Rename to ...
* hppa-nbsd-nat.c: ... this.
* hppanbsd-tdep.c: Rename to ...
* hppa-nbsd-tdep.c: ... this, adjust include.
* hppaobsd-nat.c: Rename to ...
* hppa-obsd-nat.c: ... this.
* hppaobsd-tdep.c: Rename to ...
* hppa-obsd-tdep.c: ... this, adjust include.
* i386bsd-nat.c: Rename to ...
* i386-bsd-nat.c: ... this, adjust include.
* i386bsd-nat.h: Rename to ...
* i386-bsd-nat.h: ... this, adjust include barrier and comment.
* i386bsd-tdep.c: Rename to ...
* i386-bsd-tdep.c: ... this.
* i386fbsd-nat.c: Rename to ...
* i386-fbsd-nat.c: ... this, adjust include.
* i386fbsd-tdep.c: Rename to ...
* i386-fbsd-tdep.c: ... this, adjust include.
* i386fbsd-tdep.h: Rename to ...
* i386-fbsd-tdep.h: ... this, adjust include barrier and comment.
* i386gnu-nat.c: Rename to ...
* i386-gnu-nat.c: ... this.
* i386gnu-tdep.c: Rename to ...
* i386-gnu-tdep.c: ... this.
* i386nbsd-nat.c: Rename to ...
* i386-nbsd-nat.c: ... this, adjust include.
* i386nbsd-tdep.c: Rename to ...
* i386-nbsd-tdep.c: ... this.
* i386obsd-nat.c: Rename to ...
* i386-obsd-nat.c: ... this, adjust include.
* i386obsd-tdep.c: Rename to ...
* i386-obsd-tdep.c: ... this.
* i386v4-nat.c: Rename to ...
* i386-v4-nat.c: ... this.
* i386-tdep.h: Update comments.
* m68k-tdep.h: Update comments.
* m68kbsd-nat.c: Rename to ...
* m68k-bsd-nat.c: ... this.
* m68kbsd-tdep.c: Rename to ...
* m68k-bsd-tdep.c: ... this.
* m68klinux-nat.c: Rename to ...
* m68k-linux-nat.c: ... this.
* m68klinux-tdep.c: Rename to ...
* m68k-linux-tdep.c: ... this.
* m88kbsd-nat.c: Rename to ...
* m88k-bsd-nat.c: ... this.
* mipsnbsd-nat.c: Rename to ...
* mips-nbsd-nat.c: ... this, adjust include.
* mipsnbsd-tdep.c: Rename to ...
* mips-nbsd-tdep.c: ... this, adjust include.
* mipsnbsd-tdep.h: Rename to ...
* mips-nbsd-tdep.h: ... this, adjust include barrier and comment.
* mips64obsd-nat.c: Rename to ...
* mips64-obsd-nat.c: ... this.
* mips64obsd-tdep.c: Rename to ...
* mips64-obsd-tdep.c: ... this.
* ppcfbsd-nat.c: Rename to ...
* ppc-fbsd-nat.c: ... this, adjust include.
* ppcfbsd-tdep.c: Rename to ...
* ppc-fbsd-tdep.c: ... this, adjust include.
* ppcfbsd-tdep.h: Rename to ...
* ppc-fbsd-tdep.h: ... this, adjust include barrier and comment.
* ppcnbsd-nat.c: Rename to ...
* ppc-nbsd-nat.c: ... this, adjust include.
* ppcnbsd-tdep.c: Rename to ...
* ppc-nbsd-tdep.c: ... this, adjust include.
* ppcnbsd-tdep.h: Rename to ...
* ppc-nbsd-tdep.h: ... this, adjust include barrier and comment.
* ppcobsd-nat.c: Rename to ...
* ppc-obsd-nat.c: ... this, adjust include.
* ppcobsd-tdep.c: Rename to ...
* ppc-obsd-tdep.c: ... this, adjust include.
* ppcobsd-tdep.h: Rename to ...
* ppc-obsd-tdep.h: ... this, adjust include barrier and comment.
* shnbsd-nat.c: Rename to ...
* sh-nbsd-nat.c: ... this.
* shnbsd-tdep.c: Rename to ...
* sh-nbsd-tdep.c: ... this.
* sparcnbsd-nat.c: Rename to ...
* sparc-nbsd-nat.c: ... this.
* sparcnbsd-tdep.c: Rename to ...
* sparc-nbsd-tdep.c: ... this.
* sparcobsd-tdep.c: Rename to ...
* sparc-obsd-tdep.c: ... this.
* sparc64fbsd-nat.c: Rename to ...
* sparc64-fbsd-nat.c: ... this.
* sparc64fbsd-tdep.c: Rename to ...
* sparc64-fbsd-tdep.c: ... this.
* sparc64nbsd-nat.c: Rename to ...
* sparc64-nbsd-nat.c: ... this.
* sparc64nbsd-tdep.c: Rename to ...
* sparc64-nbsd-tdep.c: ... this.
* sparc64obsd-nat.c: Rename to ...
* sparc64-obsd-nat.c: ... this.
* sparc64obsd-tdep.c: Rename to ...
* sparc64-obsd-tdep.c: ... this.
* sparc64-tdep.h: Update comments.
* vaxbsd-nat.c: Rename to ...
* vax-bsd-nat.c: ... this.
* vaxnbsd-tdep.c: Rename to ...
* vax-nbsd-tdep.c: ... this.
* vaxobsd-tdep.c: Rename to ...
* vax-obsd-tdep.c: ... this.
* x86bsd-nat.h: Rename to ...
* x86-bsd-nat.h: ... this, adjust include barrier and comment.
* x86bsd-nat.c: Rename to ...
* x86-bsd-nat.c: ... this, adjust include.
* configure.tgt: Update renamed files.
* config/alpha/fbsd.mh: Update renamed files.
* config/alpha/nbsd.mh: Update renamed files.
* config/arm/nbsdelf.mh: Update renamed files.
* config/djgpp/fnchange.lst: Update renamed files.
* config/i386/fbsd.mh: Update renamed files.
* config/i386/fbsd64.mh: Update renamed files.
* config/i386/i386gnu.mh: Update renamed files.
* config/i386/i386sol2.mh: Update renamed files.
* config/i386/nbsd64.mh: Update renamed files.
* config/i386/nbsdelf.mh: Update renamed files.
* config/i386/obsd.mh: Update renamed files.
* config/i386/obsd64.mh: Update renamed files.
* config/i386/sol2-64.mh: Update renamed files.
* config/m68k/linux.mh: Update renamed files.
* config/m68k/nbsdelf.mh: Update renamed files.
* config/m68k/obsd.mh: Update renamed files.
* config/m88k/obsd.mh: Update renamed files.
* config/mips/nbsd.mh: Update renamed files.
* config/mips/obsd64.mh: Update renamed files.
* config/pa/nbsd.mh: Update renamed files.
* config/pa/obsd.mh: Update renamed files.
* config/powerpc/fbsd.mh: Update renamed files.
* config/powerpc/nbsd.mh: Update renamed files.
* config/powerpc/obsd.mh: Update renamed files.
* config/sh/nbsd.mh: Update renamed files.
* config/sparc/fbsd.mh: Update renamed files.
* config/sparc/nbsd64.mh: Update renamed files.
* config/sparc/nbsdelf.mh: Update renamed files.
* config/sparc/obsd64.mh: Update renamed files.
* config/vax/nbsdelf.mh: Update renamed files.
* config/vax/obsd.mh: Update renamed files.
|
