aboutsummaryrefslogtreecommitdiff
path: root/gdb/h8300-tdep.c
AgeCommit message (Collapse)AuthorFilesLines
2002-04-12* defs.h (read_relative_register_raw_bytes): Delete declaration.Andrew Cagney1-3/+4
* frame.c (frame_register_read): New function. Return non-zero on success. (read_relative_register_raw_bytes_for_frame): Delete. (read_relative_register_raw_bytes): Delete. * frame.h (frame_register_read): Declare. * d30v-tdep.c: Update Copyright. Use frame_register_read. * sh-tdep.c: Ditto. * infcmd.c (do_registers_info): Ditto. * hppa-tdep.c: Ditto. * rs6000-tdep.c: Ditto. * h8500-tdep.c: Ditto. * mips-tdep.c: Ditto. * h8300-tdep.c: Ditto. * z8k-tdep.c: Ditto.
2001-03-16* config/h8300/tm-h8300.h (FRAME_ARGS_ADDRESS): Changed to useJ.T. Conklin1-6/+4
h8300_frame_args_address from frame_args_address. (FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address from frame_locals_address. (PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook from print_register_hook. (h8300_frame_args_address): Declare. (h8300_frame_find_saved_regs): Declare. (h8300_frame_locals_address): Declare. (h8300_frame_saved_pc): Declare. (h8300_pop_frame): Declare. (h8300_print_register_hook): Declare. * h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration. (h8300_frame_args_address): Renamed from frame_args_address. (h8300_frame_locals_address): Renamed from frame_locals_address. (h8300_pop_frame): Renamed from pop_frame. (h8300_print_register_hook): Renamed from print_register_hook. -------------------------------------------------------------------
2001-03-06Update/correct copyright notices.Kevin Buettner1-1/+2
2001-03-01Create new file regcache.h. Update all uses.Andrew Cagney1-1/+2
2000-12-02* ser-e7kpc.c (e7000pc_setstopbits): New function.Andrew Cagney1-3/+3
(e7000pc_ops): Add e7000pc_setstopbits. * remote-e7000.c (e7000_detach, e7000_resume, e7000_xfer_inferior_memory, e7000_files_info, e7000_files_info, e7000_insert_breakpoint, e7000_remove_breakpoint, e7000_kill): Update function signature to match target vector. * h8300-tdep.c (h8300_command, h8300h_command, h8300s_command): h8500-tdep.c (small_command, big_command, medium_command, compact_command): Update function signature to match add_cmd.
2000-07-30Protoization.Kevin Buettner1-58/+28
2000-05-28PARAMS removal.Kevin Buettner1-1/+1
1999-07-07import gdb-1999-07-07 post reformatJason Molenda1-113/+115
1999-04-26import gdb-19990422 snapshotStan Shebs1-16/+0
1999-04-16Initial creation of sourceware repositorygdb-4_18-branchpointStan Shebs1-0/+921
1999-04-16Initial creation of sourceware repositoryStan Shebs1-921/+0
1999-01-20Changes for PR 8996:Mark Alexander1-0/+27
* h8300-tdep.c (original_register_names, h8300h_register_names, h8300_register_names): Define new variables. (set_register_names): New function to set register names based on current CPU type. (h8300_command, h8300h_command, h8300s_command): Call set_register_names. * config/h8300/tm-h8300.h (h8300_register_names): Declare. (REGISTER_NAME): Define to refer to h8300_register_names.
1998-12-12CARP: Mechanism to replace EXTRA_FRAME_INFO.Andrew Cagney1-5/+3
Add two pointers (saved_regs, extra_info) to struct frame_info. Introduce new macro FRAME_INIT_SAVED_REGS which replaces FRAME_FIND_SAVED_REGS. Document. Use in mn10300 and rs6000 targets. Fix side effects on ALPHA, MIPS, Z8K and SPARC targets.
1996-11-27Wed Nov 27 11:29:06 1996 Michael Snyder <msnyder@cleaver.cygnus.com>Michael Snyder1-6/+1
* blockframe.c: ...Remove old-style CALL_DUMMY code... * h8300-tdep.c: * config/h8300/tm-h8300.h: start-sanitize-m32r * m32r-tdep.c: * config/m32r/tm-m32r.h: end-sanitize-m32r * sh-tdep.c: * config/sh/tm-sh.h: start-sanitize-v850 * v850-tdep.c: * config/v850/tm-v850.h: end-sanitize-v850
1996-11-27Added target function calls for SH, M32R and H8300.Michael Snyder1-19/+312
Added some generic target-independant code for managing call-dummy frames. Wed Nov 27 10:32:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com> * breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint. * blockframe.c: Add target-independant support for managing CALL_DUMMY frames on the host side. * frame.h: Declarations for generic CALL_DUMMY frame support. * h8300-tdep.c: Add target function calls using generic frame support. * config/h8300/tm-h8300.h: config for generic target function calls. start-sanitize-m32r * m32r-tdep.c: Add target function calls using generic frame support. * config/m32r/tm-m32r.h: config for generic target function calls. end-sanitize-m32r * sh-tdep.c: Add target function calls using generic frame support. * config/sh/tm-sh.h: config for generic target function calls. start-sanitize-v850 * v850-tdep.c: Add target function calls using generic frame support. * config/v850/tm-v850.h: config for generic target function calls. end-sanitize-v850 * valops.c: ADD PUSH_RETURN_ADDRESS so that it doesn't have to be done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
1996-07-10 * h8300-tdep.c: Remove some outdated comments.Jeff Law1-30/+76
(h8300_skip_prologue): Rework to be more correct for the H8/300H. Handle stm.l insns for the H8/S. (examine_prologue): Likewise. HMSE stuff.
1996-07-05No longer need to sanitize away h8s.Jeff Law1-20/+1
1996-06-18 * h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S.Jeff Law1-3/+54
(h8300_command): Likewise. (set_machine): Likewise. (set_machine_hook): Likewise. (_initialize_h8300m): Likewise. * config/h8300/tm-h8300.h (h8300smode): Declare. More sanitized H8/S work.
1996-05-23 * h8300-tdep.c (IS_PUSH): Refine.Jeff Law1-12/+41
(IS_MOVE_FP, IS_MOV_SP_FP): Accept H8/300H varaints. (IS_SUB4_SP, IS_SUBL_SP): New macros. (h8300_skip_prologue): Handle H8/300H prologue code sequences. (examine_prologue): Handle addresses from 0x010000 to 0xffffff when in H8/300H mode. Get the return pointer's address correctly for the H8/300H. Handle H8/300H prolouge code sequences. Avoiding major breakage on the H8/300H, and on the eval board. Jeez, did anyone even try to debug H8/300H code with gdb in the past?!?
1996-05-15 * coffread.c (coff_symtab_read): Handle C_LABEL symbols likeJeff Law1-3/+9
C_STAT symbols. * h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly. Flush cached frames just before exiting. * remote-sim.c (gdbsim_resume): Complain if the program isn't being run. * config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define. Fix some bugs exposed by the testsuite. HMSE.
1996-04-22 * corefile.c (specify_exec_file_hook): Allow arbitrary number ofMark Alexander1-8/+25
hooks. (call_extra_exec_file_hooks): New function. * h8300-tdep.c: Lint; add .h files to provide missing declarations, remove unused variables. (set_machine_hook): New function. (_initialize_h8300m): Initialize it. PR 8849.
1995-08-02Update FSF address.Fred Fish1-1/+1
1995-01-19 * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).Stan Shebs1-2/+2
* sh-tdep.c (gdb_print_insn_sh): Ditto.
1995-01-17 General cleanup and simplication of disassembler interface.Stan Shebs1-5/+8
* a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c, hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c, m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c, rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove. * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files, had been -pinsn.c files. * Makefile.in (ALLDEPFILES): Remove removed files. (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o, hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o, m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o, rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o): Remove compile actions. * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o, vax-tdep.o: Add compile actions. * defs.h (tm_print_insn): New global. * a29k-tdep.c (gdb_print_insn_a29k): New function. (_initialize_a29k_tdep): Rename from _initialize_29k, set tm_print_insn. * alpha-tdep.c (print_insn): Remove. (_initialize_alpha_tdep): Set tm_print_insn. * arm-tdep.c (arm_print_insn): New function, was print_insn in arm-pinsn.c. * convex-tdep.c (convex_print_insn): New function, was print_insn in convex-pinsn.c. * h8300-tdep.c (print_insn): Remove. (gdb_print_insn_h8300): New function. (_initialize_h8300_tdep): New function. * h8500-tdep.c (print_insn): Remove. (_initialize_h8500_tdep): New function. * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn. * i386-tdep.c (_initialize_i386_tdep): New function. * i960-tdep.c (mem, next_insn): New functions, were in i960-pinsn.c. (_initialize_i960_tdep): Set tm_print_insn. * m68k-tdep.c (_initialize_m68k_tdep): New function. * m88k-tdep.c (_initialize_m88k_tdep): New function. * mips-tdep.c (gdb_print_insn_mips): New function. (_initialize_mips_tdep): Set tm_print_insn. * pyr-tdep.c (pyr_print_insn): New function, was print_insn in pyr-pinsn.c. * rs6000-tdep.c (_initialize_rs6000_tdep): New function. * sh-tdep.c (print_insn): Remove. (gdb_print_insn_sh): New function. (_initialize_sh_tdep): Set tm_print_insn. * sparc-tdep.c (_initialize_sparc_tdep): New function. * w65-tdep.c (print_insn): Remove. (_initialize_w65_tdep): New function. * z8k-tdep.c (print_insn): Remove. (gdb_print_insn_z8k): New function. (_initialize_z8k_tdep): Set tm_print_insn. * printcmd.c (print_insn): New function, generic disassembler. * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o. * defs.h (query_hook, error_hook): Fix prototypes.
1994-11-24 * tm-h8300.h (REMOTE_BREAKPOINT): Define.Steve Chamberlain1-1/+0
* h8300-tdep.c (h8300_pop_frame): Remove redundant call.
1994-11-04 Replace useless FRAME, FRAME_ADDR types with struct frame_info *Stan Shebs1-12/+8
and CORE_ADDR, respectively. * frame.h (FRAME, FRAME_INFO_ID, FRAME_ADDR): Remove. * blockframe.c (get_frame_info): Remove. * a29k-tdep.c, alpha-tdep.c, blockframe.c, breakpoint.c, breakpoint.h, energize.c, findvar.c, gdbtk.c, gould-pinsn.c, h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, i386-tdep.c, i960-tdep.c, infcmd.c, inferior.h, infrun.c, m68k-tdep.c, m88k-tdep.c, mips-tdep.c, nindy-tdep.c, printcmd.c, pyr-tdep.c, rs6000-tdep.c, sh-tdep.c, sparc-tdep.c, stack.c, valops.c, z8k-tdep.c, config/a29k/tm-a29k.h, config/alpha/tm-alpha.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h, config/mips/tm-mips.h, config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h, config/pyr/tm-pyr.h, config/sparc/tm-sparc.h): Replace FRAME with struct frame_info * everywhere, replace FRAME_ADDR with CORE_ADDR, rename variables consistently (using `frame' or `fi'), remove calls to get_frame_info and FRAME_INFO_ID, remove comments about FRAME and FRAME_ADDR cruftiness.
1994-10-08 The point of these changes is to avoid reading the frame pointerJim Kingdon1-2/+0
and stack pointer during stepping, to speed things up. A. Changes to not select a frame until we need a selected frame: * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1). * infrun.c (wait_for_inferior): Move call to select_frame back to normal_stop. This reverts a change of 13 Apr 94 (it says Jeff Law, but the change was my idea); the only reason for that change was so we could save and restore the selected frame in wait_for_inferior, and now that flush_cached frames clears the selected frame, that should work OK now. B. Changes to not create a current_frame until we need one: * blockframe.c (get_current_frame): If current_frame is NULL, try to create an innermost frame. * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy), infrun.c (wait_for_inferior), thread.c (thread_switch), convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame), alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command), h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame), hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame), i960-tdep.c (pop_frame), m68k-tdep.c (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c (pop_frame), config/arm/tm-arm.h (POP_FRAME), config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME), config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't call create_new_frame. * corelow.c (core_open), altos-xdep.c (core_file_command), arm-xdep.c (core_file_command), gould-xdep.c (core_file_command), m3-nat.c (select_thread), sun386-nat.c (core_file_command), umax-xdep.c (core_file_command): Don't call create_new_frame; do call flush_cached_frames. * blockframe.c (reinit_frame_cache): Don't call create_new_frame or select_frame. C. Changes to get rid of stop_frame_address and instead only fetch the frame pointer when we need it. * breakpoint.c (bpstat_stop_status): Remove argument frame_address; use FRAME_FP (get_current_frame ()). * infrun.c (wait_for_inferior): Don't pass frame pointer to bpstat_stop_status. * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame ()) instead of stop_frame_address. * infrun.c (save_inferior_status, restore_inferior_status), inferior.h (struct inferior_status): Don't save and restore stop_frame_address. * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c (select_thread): Remove stop_frame_address and uses thereof. D. Same thing for the stack pointer. * infrun.c (wait_for_inferior): Remove stop_sp and replace uses thereof with read_sp (). E. Change to eliminate one nasty little spot where we were wanting to know the frame pointer from before the current step (idea from GDB 3.5, which saved my ass, because my other ideas of how to fix it were very baroque). * infrun.c: Remove prev_frame_address. * infrun.c (wait_for_inferior, step_over_function): Use step_frame_address instead of prev_frame_address. F. Same basic idea for the stack pointer. * inferior.h, infcmd.c: New variable step_sp. * infcmd.c (step_1, until_next_command): Set it. * infrun.c: Remove prev_sp and replace uses by step_sp. * infrun.c (wait_for_inferior): If we get out of the step range, then set step_sp to the current stack pointer before we start going again.
1994-09-03 * objfiles.c (allocate_objfile): Add the newly-created objfile toStan Shebs1-1/+1
the end of the list of objfiles, instead of at the beginning. * xcoffread.c (allocate_include_entry): New function, abstracted from code in record_include_begin. (record_include_begin, record_include_end): Call it. * blockframe.c (reinit_frame_cache): Test inferior_pid instead of target_has_stack to decide whether to create a real stack frame for the cache. * coffread.c (process_coff_symbol) [CXUX_TARGET]: Ignore vendor section. * config/m88k/tm-cxux.h (CXUX_TARGET): Define. * h8300-tdep.c: Include "dis-asm.h" instead of <dis-asm.h>.
1993-12-12 * ser-go32.c: Lint. (strncasecmp): Removed, now in libiberty.Steve Chamberlain1-4/+2
(go32_readchar): Special handling for faster polling. (async structure): Volatile. * h8300-tdep.c (print_register_hook): Allocate and use the right number bytes for the raw register. * h8500-tdep.c (regoff, frame_find_saved_reg, examine_prologue): deleted. (h8500_register_size, h8500_register_virtual_type, ): Use new way of counting registers. * remote-e7000.c (echo_index): deleted. (expect): Better handling of user interrupts. (expect_prompt): Remove never used log file support. (want, want_nopc): Add support for H8/300H. (fetch_regs_from_dump): Treat \r and \n as whitespace. (e7000_drain): Send an "end" command before waiting for output to stop. (e7000_wait): Cope with H8/300H, better handling of user interrupts. (why_stop, expect_n, sub2_from_pc): New function. * remote-utils.c (gr_load_image): call fflush and QUIT more regularly. * utils.c (notice_quit): New function for polling for user interrupts.
1993-11-15 * remote-e7000.c: New file to cope with the Hitachi E7000 ICE.Steve Chamberlain1-11/+0
* remote-utils.c, remote-utils.h (gr_load_image): New function to download to target. * h8300-tdep.c, h8500-tdep.c, remote-z8k.c, sh-tdep.c z8k-tdep.c (sim_load): delete. * remote-sim.c (sim_load): Use gr_load_image. * config/sh/sh.mt: Add remote-e7000
1993-11-01Change the stream argument to _filtered to GDB_FILE *.Thomas Lord1-20/+20
Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-10-16 * h8300-tdep.c, h8500-tdep.c: Define sim_load only, but notJim Kingdon1-19/+3
sim_kill, sim_open, or sim_set_args.
1993-10-07 * h8300-tdep.c (sim_load, sim_kill, sim_open, sim_set_args):Steve Chamberlain1-0/+27
New functions. * infrun.c (normal_stop): Don't try and set the pc in the current frame coredump if there isn't one. * remote-sim.c (gdbsim_store_register): Don't SWAP_TARGET_AND_HOST, sim_store_register takes bytes in raw order. (gdbsim_wait): Set status with WSETSTOP. * config/h8300/tm-h8300.h (sr_get_debug): Define
1993-09-01bzero -> memsetK. Richard Pixley1-1/+1
1993-08-02 * h8300-tdep.c: Use new variable h8300hmode.Steve Chamberlain1-3/+49
1993-07-15(examine_prologue): Make prototype match definition.David Edelsohn1-1/+2
1993-07-10 * values.c, value.h (modify_field), callers: Make fieldval a LONGEST.Jim Kingdon1-1/+1
* h8300-tdep.c (NEXT_PROLOGUE_INSN): Make pword1 an INSN_WORD * not short *. * findvar.c, defs.h ({extract,store}_{signed_integer,unsigned_integer,address}): New routines to replace SWAP_TARGET_AND_HOST. All over: All uses of SWAP_TARGET_AND_HOST on integers replaced.
1993-07-10 * findvar.c, defs.hJim Kingdon1-2/+3
({extract,store}_{signed_integer,unsigned_integer,address}): New routines to replace SWAP_TARGET_AND_HOST. All over: All uses of SWAP_TARGET_AND_HOST on integers replaced.
1993-07-08* h8300-tdep.c (print_insn): Call print_insn_h8300h if h8/300h.David Edelsohn1-14/+8
(examine_prologue): reg_save_depth is 4 if h8/300h.
1993-07-04* h8300-tdep.c (examine_prologue): Fix call to read_memory_unsigned_integer.David Edelsohn1-2/+1
1993-06-09 * coffread.c (init_stringtab): Fix bug where sizeof(long) != 4.Steve Chamberlain1-14/+14
* gdbcore.h, core.c (read_memory_unsigned_integer): New function. * findvar.c (read_register, write_register): Fix thinko where sizeof(host long) != sizeof(target int). * h8300-tdep.c: Use new read_memory_unsigned_integer call. * sh-tdep.c (_initialize_sh_tdep): Add memory_size command.
1993-03-09 * utils.c (quit): If using go32, still call error when quit seen.Steve Chamberlain1-3/+3
(pollquit): New function to poll keyboard for user interrupt, called from QUIT. * xm-go32.h (QUIT): Define to call pollquit. * h8300-tdep.c (examine_prologue): Use correct value for number of registers.
1993-02-12 * h8300-tdep.c, tm-h8300.h: turn off some experimental featuresSteve Chamberlain1-4/+7
1993-01-03 * remote-sim.c: first attempt at general simulator interfaceSteve Chamberlain1-171/+216
* remote-hms.c: whitespace * h8300-tdep.c: (h8300_skip_prologue, examine_prologue): understand new stack layout. (print_register_hook): print ccr register in a fancy way.
1992-03-03Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com)Michael Tiemann1-1/+0
* All GDB files that #include defs.h: Removed stdio.h. (defs.h): #include stdio.h. This has been tested by building GDBs for all targets hosted on Sun4. None of the build problems were related to stdio.h inclusion. (n.b. many configurations don't build for other reasons.)
1992-03-03 * gdbtypes.c (lookup_pointer_type): initialize the TYPE_LENGTH ofSteve Chamberlain1-6/+6
a ptype to reflect the setting of TARGET_PTR_BIT. Set the TYPE_FLAGS of a ptype to TYPE_FLAG_UNSIGNED. * tm-h8300.h, h8300-tdep.c, remote-hms.c: personal checkpoint * printcmd.c (print_address): if ADDR_BITS_REMOVE is defined, use it before printing out the hex shape of an address.
1992-02-06 * coffread.c (read_enum_type): Use the size of a target int whenSteve Chamberlain1-16/+353
describing enum. * defs.h: added new #define for TARGET_PTR_BIT, defaults to size of target int. * h8300-tdep.c, remote-hms.c, tm-h8300.h: too many changes to count * symtab.c (lookup_reference_type, lookup_ptr_type): use TARGET_PTR_BIT to determine size of a pointer * values.c (unpack_long): when unpacking a REF or a PTR don't assume the size of the type.
1992-01-24One step closer.Steve Chamberlain1-18/+45
1992-01-16Stubs to get things goingSteve Chamberlain1-0/+32