| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet
supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/',
which makes it available also on gdbserver.
gdb/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.ac: Don't check for 'dlfcn.h' (moved to
gdbsupport/common.m4).
* Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to
'gdbsupport/'.
(HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'.
* compile/compile-c-support.c: Include
'gdbsupport/gdb-dlfcn.h'.
* gdbsupport/common.m4: Check for 'dlfcn.h'.
* gdb-dlfcn.c: Move to...
* gdbsupport/gdb-dlfcn.c: ... here.
* gdb-dlfcn.h: Move to...
* gdbsupport/gdb-dlfcn.h: ... here.
gdb/gdbserver/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'.
(OBS): Add 'gdbsupport/gdb-dlfcn.o'.
* config.in: Regenerate.
* configure: Regenerate.
|
|
Pedro pointed out that target_write_memory should use gdb::byte_vector
rather than std::vector<unsigned char>.
gdb/gdbserver/ChangeLog
2019-08-15 Tom Tromey <tromey@adacore.com>
* target.c (target_write_memory): Use gdb::byte_vector.
|
|
target_write_memory is just a simple wrapper for
write_inferior_memory. Because target_write_memory is needed for
gdbsupport, and because gdb uses the name "target_write_memory"
everywhere, this patch renames write_inferior_memory and removes the
wrapper. I think this brings gdb and gdbserver slightly more in sync.
gdb/gdbserver/ChangeLog
2019-08-15 Tom Tromey <tromey@adacore.com>
* tracepoint.c (write_inferior_data_pointer)
(write_inferior_integer, write_inferior_int8)
(write_inferior_uinteger, m_tracepoint_action_download)
(r_tracepoint_action_download, x_tracepoint_action_download)
(l_tracepoint_action_download, clear_inferior_trace_buffer)
(download_agent_expr, download_tracepoint_1)
(download_trace_state_variables, upload_fast_traceframes): Update.
* server.c (gdb_write_memory): Update.
* remote-utils.c (relocate_instruction): Update.
* proc-service.c (ps_pdwrite): Update.
* mem-break.c (remove_memory_breakpoint)
(delete_fast_tracepoint_jump, set_fast_tracepoint_jump)
(uninsert_fast_tracepoint_jumps_at)
(reinsert_fast_tracepoint_jumps_at): Update.
* linux-x86-low.c (append_insns)
(i386_install_fast_tracepoint_jump_pad)
(amd64_write_goto_address, i386_write_goto_address): Update.
* linux-s390-low.c (append_insns, s390_write_goto_address):
Update.
* linux-ppc-low.c (ppc_relocate_instruction)
(ppc_install_fast_tracepoint_jump_pad, emit_insns)
(ppc_write_goto_address): Update.
* linux-aarch64-low.c (append_insns): Update.
* target.h (struct target_ops): Update.
(write_inferior_memory): Don't declare.
* target.c (target_write_memory): Rename from
write_inferior_memory. Remove old target_write_memory.
|
|
gdbserver's write_inferior_memory uses a static variable to avoid
memory leaks, and has a comment referring to the lack of cleanups.
This patch removes this comment and the code in favor of a
straightforward use of std::vector.
gdb/gdbserver/ChangeLog
2019-08-15 Tom Tromey <tromey@adacore.com>
* target.c (write_inferior_memory): Use std::vector.
|
|
This patch drops gdb's configury support for glibc's mcheck function.
It has been observed to cause false abort()s, because it is
thread-unsafe yet interposes every malloc/free operation. So if any
library transitively used by gdb also uses threads, then these
functions can easily corrupt their own checking data. These days, gcc
ASAN and valgrind provide high quality checking, and mcheck is
apparently itself being slowly deprecated.
So, let's stop linking to it. Attached patch drops the
autoconf/Makefile machinery for both gdb and gdbserver. No
testsuite-visible impact. IMHO not worth mentioning in NEWS.
See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939
gdb/ChangeLog
PR build/24886
* configure.ac: Drop enable-libmcheck support.
* configure, config.in: Rebuild.
* libmcheck.m4: Remove.
* acinclude.m4: Don't include it.
* Makefile.in: Don't distribute it.
* top.c (print_gdb_configuration): Don't mention it.
gdb/gdbserver/ChangeLog
PR build/24886
* configure.ac: Drop enable-libmcheck support.
* configure, config.in: Rebuild.
* acinclude.m4: Don't include it.
|
|
Remove the xml tests. Now that it has been proven the new descriptions
are identical, there is no need to keep testing that. Also, it would
prevent the old xml files from being removed.
Remove the old xml files from gdbserver and delete them.
gdb/ChangeLog:
* arm-tdep.c (_initialize_arm_tdep): Remove xml tests.
* features/arm/arm-with-iwmmxt.c: Remove.
* features/arm/arm-with-iwmmxt.xml: Remove.
* features/arm/arm-with-m-fpa-layout.c: Remove.
* features/arm/arm-with-m-fpa-layout.xml: Remove.
* features/arm/arm-with-m-vfp-d16.c: Remove.
* features/arm/arm-with-m-vfp-d16.xml: Remove.
* features/arm/arm-with-m.c: Remove.
* features/arm/arm-with-m.xml: Remove.
* features/arm/arm-with-neon.c: Remove.
* features/arm/arm-with-neon.xml: Remove.
* features/arm/arm-with-vfpv2.c: Remove.
* features/arm/arm-with-vfpv2.xml: Remove.
* features/arm/arm-with-vfpv3.c: Remove.
* features/arm/arm-with-vfpv3.xml: Remove.
gdb/gdbserver/ChangeLog:
2019-07-05 Alan Hayward <alan.hayward@arm.com>
* configure.srv: Remove Arm xml files.
|
|
Switch gdbserver over to using feature target descriptions.
Add a function for determining the type of a given target description,
and use where required.
gdb/gdbserver/ChangeLog:
* configure.srv: Add new files. Remove xml generated files.
* linux-aarch32-low.c (initialize_low_arch_aarch32): Don't init
registers.
* linux-aarch32-low.h (tdesc_arm_with_neon): Remove.
* linux-aarch32-tdesc.c: New file.
* linux-aarch32-tdesc.h: New file.
* linux-aarch64-low.c (aarch64_arch_setup): Call aarch32_linux_read_description.
* linux-arm-low.c (init_registers_arm, tdesc_arm)
(init_registers_arm_with_iwmmxt, tdesc_arm_with_iwmmxt)
(init_registers_arm_with_vfpv2, tdesc_arm_with_vfpv2)
(init_registers_arm_with_vfpv3, tdesc_arm_with_vfpv3): Remove.
(arm_fill_wmmxregset, arm_store_wmmxregset, arm_fill_vfpregset)
(arm_store_vfpregset): Call arm_linux_get_tdesc_fp_type.
(arm_read_description): Call arm_linux_read_description.
(initialize_low_arch): Don't init registers.
* linux-arm-tdesc.c: New file.
* linux-arm-tdesc.h: New file.
|
|
*When reading a target description, do the ptrace check before picking the
target description.
*In wmmxregset functions, declare the counter inside the for.
*Call arm_linux_init_hwbp_cap from in arm_arch_setup - it doesn't belong in
arm_read_description.
gdb/ChangeLog:
* arm-linux-nat.c (arm_linux_nat_target::read_description): Check
ptrace earlier,
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_fill_wmmxregset, arm_store_wmmxregset):
Move counter inside for.
(arm_read_description): Check ptrace earlier.
(arm_arch_setup): Call arm_linux_init_hwbp_cap here.
|
|
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
|
|
Both targets were using a mixture of defines and hardcoded values.
Add a standard set in arch/arm.h and use throughout, ensuring that
none of the existing sizes change.
No functionality changes.
gdb/ChangeLog:
* aarch32-linux-nat.h (VFP_REGS_SIZE): Remove define.
* aarch64-linux-nat.c (fetch_fpregs_from_thread)
(store_fpregs_to_thread)
(aarch64_linux_nat_target::read_description): Use ARM_VFP3_REGS_SIZE.
* arch/arm.h (IWMMXT_VEC_REGISTER_SIZE, ARM_CORE_REGS_SIZE)
(ARM_FP_REGS_SIZE, ARM_VFP2_REGS_SIZE, ARM_VFP3_REGS_SIZE)
(IWMMXT_REGS_SIZE): Add define.
* arm-linux-nat.c (IWMMXT_REGS_SIZE): Remove define.
(fetch_vfp_regs, store_vfp_regs)
(arm_linux_nat_target::read_description): Use ARM_VFP3_REGS_SIZE.
* arm-tdep.c (arm_register_g_packet_guesses): Use new defines.
gdb/gdbserver/ChangeLog:
* linux-aarch32-low.c (arm_read_description, arm_regsets): Use new
defines.
* linux-arm-low.c (arm_read_description, arm_regsets): Likewise.
|
|
Both the i386, X86_64 and AArch64 builds of gdbserver include a bunch of legacy
xml files, dat files and auto generated C files, when building for unit test.
These tests exists back from when feature target descriptions were added to
prove that the new target descriptions were identical to the original
older versions. The old files are not used for anything other than these tests.
Now that this has been proven, we are not gaining anything by keeping the
original files and tests. Should new functionality be added, it would break
the tests, unless the functionality was backported to the xml. There is no
requirement that we must match the exact xml from N releases ago. It adds
obfuscation, where as the feature target descriptions were meant to simplify
the code.
In addition, there are a bunch of xml and dat files which are completely unused.
This patch removes the selftests and the target descriptions from gdbserver.
Update the unittest to allow 0 tests (note, this failed on other targets that
never had any tests).
gdb/ChangeLog:
* aarch64-tdep.c: Remove xml self tests.
* amd64-linux-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-tdep.c: Likewise.
gdb/gdbserver/ChangeLog:
* configure.srv: Remove legacy xml.
* linux-aarch64-low.c (initialize_low_arch): Remove
initialize_low_tdesc call.
* linux-aarch64-tdesc-selftest.c: Remove file.
* linux-aarch64-tdesc.h (initialize_low_tdesc): Remove.
* linux-x86-low.c (initialize_low_arch): Remove
initialize_low_tdesc call.
* linux-x86-tdesc-selftest.c: Remove file.
* linux-x86-tdesc.h (initialize_low_tdesc): Remove.
gdb/testsuite/ChangeLog:
* gdb.server/unittest.exp: Allow 0 unit tests to run.
|
|
When building gdb on s390x with -m31, we run into this error:
...
gdb/gdbserver/linux-s390-ipa.c: \
In function 'const target_desc* get_ipa_tdesc(int)':
gdb/gdbserver/linux-s390-ipa.c:371:18: error: 's390_te_ft_collect_regmap' \
was not declared in this scope
SET_REGMAP(s390_te_ft_collect_regmap, 0);
The offending line is part of this code snippet:
...
case S390_TDESC_GS:
SET_REGMAP(s390_te_ft_collect_regmap, 0);
return tdesc_s390_gs_linux64;
...
introduced in commit ce29f8439f "S390: Make IPA recognize tdescs with guarded
storage".
The snippet is part of an #ifdef __s390x__ construct, in the false branch, and
in the true branch we find a snippet introduced by the same commit:
...
case S390_TDESC_GS:
SET_REGMAP(s390x_te_ft_collect_regmap, 0);
return tdesc_s390x_gs_linux64;
...
which is paired with a comment update for s390x_te_ft_collect_regmap:
...
-/* Used for s390x-te-linux64, s390x-tevx-linux64. */
+/* Used for s390x-te-linux64, s390x-tevx-linux64, and
+ s390x-gs-linux64. */
static const int s390x_te_ft_collect_regmap[] = {
...
A similar comment update is added in the same commit for
s390_te_linux64_ft_collect_regmap:
...
-/* Used for s390-te-linux64, s390-tevx-linux64. */
+/* Used for s390-te-linux64, s390-tevx-linux64, and s390-gs-linux64. */
static const int s390_te_linux64_ft_collect_regmap[] = {
...
but not paired with any update.
Fix the build breaker by making the offending SET_REGMAP use the regmap
indicated by the comment.
...
- SET_REGMAP(s390_te_ft_collect_regmap, 0);
+ SET_REGMAP(s390_te_linux64_ft_collect_regmap, 0);
...
Build on s390x-linux with -m31.
gdb/gdbserver/ChangeLog:
2019-06-20 Tom de Vries <tdevries@suse.de>
* linux-s390-ipa.c (get_ipa_tdesc)[!__s390x__]: Use
s390_te_linux64_ft_collect_regmap for S390_TDESC_GS.
|
|
Building gdb with clang, I run into:
...
src/gdb/gdbserver/linux-low.c:6190:41: error: comparison of unsigned \
expression < 0 is always false [-Werror,-Wtautological-compare]
if (debug_write ("sigchld_handler\n",
sizeof ("sigchld_handler\n") - 1) < 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
...
This regression is introduced by commit a7e559cc08 "gdbserver: Ensure all
debug output uses debug functions", which replaces calls to write with result
type ssize_t with calls to debug_write with result type size_t.
Fix this by making debug_write return ssize_t.
Build and reg-tested on x86_64-linux.
gdb/gdbserver/ChangeLog:
2019-06-19 Tom de Vries <tdevries@suse.de>
* debug.h (debug_write): Change return type to ssize_t.
* debug.c (debug_write): Same.
|
|
|
|
This patch moves the gdb/gnulib subdirectory to the top level.
It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this. However, gdbserver still builds its own
copy of gnulib, just from the new source location.
A small hack was needed to ensure that gnulib is only built when gdb
is enabled. The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.
Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.
Tested by the buildbot.
ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Add gnulib.
* gnulib: New directory, move from gdb/gnulib.
* configure.ac (host_libs): Add gnulib.
* configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* gnulib: Move directory to top-level.
* configure.ac: Don't configure gnulib.
* configure: Rebuild.
* common/common-defs.h: Use new path to gnulib.
* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
(GNULIB_H): Remove.
(INCGNU): Look in new gnulib location.
(HFILES_NO_SRCDIR): Remove gnulib files.
(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
(generated_files): Remove GNULIB_H.
($(LIBGNU), all-lib): Remove targets.
(distclean): Don't mention GNULIB_BUILDDIR.
($(GNULIB_BUILDDIR)/Makefile): Remove target.
gdb/gdbserver/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* configure.ac: Use new path to gnulib.
* configure: Rebuild.
* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
to gnulib.
gnulib/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* update-gnulib.sh: Adjust paths.
* Makefile.in: Adjust paths.
* configure.ac: Adjust paths. Use ACX_LARGEFILE.
* configure: Rebuild.
|
|
When "common" becomes a library, linking will cause a symbol clash,
because "xmalloc" and some related symbols are defined in that
library, libiberty, and readline.
To work around this problem, this patch moves the clashing symbols to
a new file, which is then compiled separately for both gdb and
gdbserver.
gdb/ChangeLog
2019-06-11 Tom Tromey <tom@tromey.com>
* common/common-utils.c (xmalloc, xrealloc, xcalloc)
(xmalloc_failed): Move to alloc.c.
* alloc.c: New file.
* Makefile.in (COMMON_SFILES): Add alloc.c.
gdb/gdbserver/ChangeLog
2019-06-11 Tom Tromey <tom@tromey.com>
* Makefile.in (SFILES): Add alloc.c.
(OBS): Add alloc.o.
(IPA_OBJS): Add alloc-ipa.o.
(alloc-ipa.o): New target.
(%.o: ../%.c): New pattern rule.
|
|
ARI pointed out that a recent patch introduced a call to "warning"
with a string that ended in a newline:
https://sourceware.org/ml/gdb-patches/2019-06/msg00000.html
This is generally forbidden, I believe, because warning adds its own
newline.
This patch removes all of the trailing newlines I was able to find. I
searched for 'warning (.*\\n"' and then fixed the ones where the
newline appeared at the end of the string (some had internal
newlines).
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* m32c-tdep.c (m32c_m16c_address_to_pointer): Don't end warning
with a newline.
* guile/guile.c (handle_boot_error): Don't end warning with a
newline.
* cli/cli-cmds.c (exit_status_set_internal_vars): Don't end
warning with a newline.
* s12z-tdep.c (s12z_skip_prologue): Don't end warning with a
newline.
(s12z_frame_cache): Likewise.
* dwarf-index-cache.c (index_cache::store): Don't end warning with
a newline.
* solib-svr4.c (disable_probes_interface): Don't end warning with
a newline.
* nat/fork-inferior.c (fork_inferior): Don't end warning with a
newline.
* python/python.c (do_finish_initialization): Don't end warning
with a newline.
gdb/gdbserver/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* remote-utils.c (look_up_one_symbol, relocate_instruction): Don't
end warning with a newline.
* linux-s390-low.c (s390_get_wordsize): Don't end warning with a
newline.
* thread-db.c (attach_thread): Don't end warning with a newline.
(thread_db_notice_clone): Likewise.
* tracepoint.c (gdb_agent_helper_thread): Don't end warning with a
newline.
* linux-x86-low.c (x86_get_min_fast_tracepoint_insn_len): Don't
end warning with a newline.
|
|
Adds an utility function to make it shorter to write the common case
of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it
throughout.
Note: I tried to put this in common/common-utils.h near skip_spaces,
etc. but that is included in common/common-defs.h before
common/gdb_unique_ptr.h is included, so it would fail to compile
because gdb::unique_xmalloc_ptr isn't defined at that point yet. I
tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but
that doesn't work because gdb_unique_ptr.h depends on common-utils.h
for xfree.
gdb/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (make_unique_xstrdup): New.
* ada-lang.c (catch_ada_completer): Use make_unique_xstrdup.
* breakpoint.c (condition_completer): Likewise.
* cli/cli-dump.c (scan_expression): Likewise.
* common/filestuff.c (mkdir_recursive): Likewise.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up)
* common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile)
(gdb_abspath): Likewise.
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Likewise.
* completer.c (complete_explicit_location):
(signal_completer, reg_or_group_completer_1): Likewise.
* cp-support.c (cp_remove_params_if_any): Likewise.
* fbsd-tdep.c (fbsd_core_vnode_path): Likewise.
* guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise.
* infcmd.c (strip_bg_char): Likewise.
* linespec.c (copy_token_string): Likewise.
* mi/mi-main.c (output_cores): Likewise.
* psymtab.c (psymtab_search_name):
* symfile.c (test_set_ext_lang_command): Likewise.
* target.c (target_fileio_read_stralloc): Likewise.
* tui/tui-regs.c (tui_reggroup_completer): Likewise.
* value.c (complete_internalvar): Likewise.
gdb/gdbserver/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* server.c (captured_main): Use make_unique_xstrdup.
|
|
gdbreplay had its own implementation of fromhex. This patch changes
it to use the one in common/.
gdb/gdbserver/ChangeLog
2019-06-02 Tom Tromey <tom@tromey.com>
* gdbreplay.c (fromhex): Remove.
* Makefile.in (GDBREPLAY_OBS): Add rsp-low.o.
|
|
GCC 9 has a few new warnings that aren't enabled in the gdb build by
default: -Wdeprecated-copy, -Wdeprecated-copy-dtor, and
-Wredundant-move. This patch enables them all.
Tested by rebuilding with a new GCC (git master) on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* inflow.c (struct terminal_info): Add default operator=.
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Add -Wdeprecated-copy,
-Wdeprecated-copy-dtor, -Wredundant-move.
gdb/gdbserver/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* configure: Rebuild.
|
|
This line of code...
*(int64_t *) ptr = *(int32_t *) ptr;
...in linux-x86-low.c is not needed (and does not work correctly)
within a 32-bit executable. I added an __x86_64__ ifdef (which is
used extensively elsewhere in the file for like purposes) to prevent
this code from being included in 32-bit builds.
It fixes the following regressions when running on native
i686-pc-linux-gnu:
FAIL: gdb.server/abspath.exp: continue to main
FAIL: gdb.server/connect-without-multi-process.exp: multiprocess=auto: continue to main
FAIL: gdb.server/connect-without-multi-process.exp: multiprocess=off: continue to main
FAIL: gdb.server/ext-restart.exp: restart: run to main
FAIL: gdb.server/ext-restart.exp: run to main
FAIL: gdb.server/ext-run.exp: continue to main
FAIL: gdb.server/ext-wrapper.exp: print d
FAIL: gdb.server/ext-wrapper.exp: restart: print d
FAIL: gdb.server/ext-wrapper.exp: restart: run to marker
FAIL: gdb.server/ext-wrapper.exp: run to marker
FAIL: gdb.server/no-thread-db.exp: continue to breakpoint: after tls assignment
FAIL: gdb.server/reconnect-ctrl-c.exp: first: stop with control-c
FAIL: gdb.server/reconnect-ctrl-c.exp: second: stop with control-c
FAIL: gdb.server/run-without-local-binary.exp: run test program until the end
FAIL: gdb.server/server-kill.exp: continue to breakpoint: after server_pid assignment
FAIL: gdb.server/server-kill.exp: tstatus
FAIL: gdb.server/server-run.exp: continue to main
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_fill_gregset): Don't compile 64-bit
sign extension code on 32-bit builds.
|
|
This changeset defines _WIN32_WINNT to at least 0x0501, the level
of Windows XP, unless defined to a higher level, in a single
place. It then removes all the overrides of _WIN32_WINNT in
individual files as no longer needed. Doing this also solves
compilation of windows-nat.c with mingw.org's MinGW, as that
file uses CONSOLE_FONT_INFO which needs the XP level to become
exposed in the Windows headers, while mingw.org defaults to
Windows 9X.
gdb/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* common/common-defs.h [__MINGW32__ || __CYGWIN__]: Define
_WIN32_WINNT to the XP level, unless already defined to a higher
level.
* unittests/parse-connection-spec-selftests.c:
* ser-tcp.c:
* common/netstuff.c [USE_WIN32API]: Remove the _WIN32_WINNT
override.
gdb/gdbserver/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* remote-utils.c:
* gdbreplay.c [USE_WIN32API]: Remove the _WIN32_WINNT override.
|
|
This changes gdbserver to use std::list rather than common/queue.h for
event notifications.
gdb/gdbserver/ChangeLog
2019-04-19 Tom Tromey <tom@tromey.com>
* server.c (struct vstop_notif): Derive from notif_event.
<base>: Remove.
(queue_stop_reply): Update.
(remove_all_on_match_ptid): Change type. Rewrite.
(discard_queued_stop_replies): Rewrite.
(in_queued_stop_replies_ptid): Change type.
(in_queued_stop_replies): Rewrite.
(notif_stop): Update.
(queue_stop_reply_callback): Update.
(captured_main): Don't call initialize_notif.
(push_stop_notification): Update.
* notif.c (notif_write_event, handle_notif_ack)
(notif_event_enque, notif_push): Update.
(notif_event_xfree, initialize_notif): Remove.
* notif.h (struct notif_event): Include <list>, not
"common/queue.h".
(struct notif_server) <queue>: Now a std::list.
(notif_event_p): Remove typedef.
(initialize_notif): Don't declare.
(struct notif_event): Add virtual destructor.
|
|
All debug output needs to go via debug functions to ensure it writes to the
correct output stream.
gdb/ChangeLog:
* nat/linux-waitpid.c (linux_debug): Call debug_vprintf.
gdb/gdbserver/ChangeLog:
* ax.c (ax_vdebug): Call debug_printf.
* debug.c (debug_write): New function.
* debug.h (debug_write): New declaration.
* linux-low.c (sigchld_handler): Call debug_write.
|
|
Add command line option to send all debug output to a given file.
Always default back to stderr.
Add matching monitor command. Add documentation.
gdb/doc/ChangeLog:
* gdb.texinfo
(Other Command-Line Arguments for gdbserver): Add debug-file
option.
(Monitor Commands for gdbserver): Likewise.
(gdbserver man): Likewise.
gdb/gdbserver/ChangeLog:
* debug.c (debug_set_output): New function.
(debug_vprintf): Send output to debug_file.
(debug_flush): Likewise.
* debug.h (debug_set_output): New declaration.
* server.c (handle_monitor_command): Add debug-file option.
(captured_main): Likewise.
|
|
A comment in debug.h (written in 2014) states: "We declare debug format
variables here, and debug_threads but no other debug content variables
(e.g., not remote_debug) because while this file is not currently used by
IPA it may be some day, and IPA may have its own set of debug content
variables".
This has resulted in remote_debug being declared in many .c/.h files
throughout gdbserver.
It would be much simplier to define it one place. The most logical place to
define it is in debug.h, surrounded by #define guards. If IPA is changed,
then at that point the variable can be moved elsewhere.
gdb/gdbserver/ChangeLog:
* debug.c (remote_debug): Add definition.
* debug.h (remote_debug): Add declaration.
* hostio.c (remote_debug): Remove declaration.
* remote-utils.c (struct ui_file): Likewise.
(remote_debug): Likewise.
* remote-utils.h (remote_debug): Likewise,
* server.c (remote_debug): Remove definition.
|
|
This commit fixes some failures in gdb.base/interrupt.exp
when debugging a 32-bit i386 linux inferior from an amd64 host.
When running the following test...
make check RUNTESTFLAGS="--target_board unix/-m32 interrupt.exp"
... without this commit, I see the following output:
FAIL: gdb.base/interrupt.exp: continue (the program exited)
FAIL: gdb.base/interrupt.exp: echo data
FAIL: gdb.base/interrupt.exp: Send Control-C, second time
FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
ERROR: Undefined command "".
ERROR: GDB process no longer exists
=== gdb Summary ===
When the test is run with this commit in place, we see 12 passes
instead. This is the desired behavior.
Analysis:
On Linux, when a syscall is interrupted by a signal, the syscall
may return -ERESTARTSYS when a signal occurs. Doing so indicates that
the syscall is restartable. Then, depending on settings associated
with the signal handler, and after the signal handler is called, the
kernel can then either return -EINTR or can cause the syscall to be
restarted. In this discussion, we are concerned with the latter
case.
On i386, the kernel returns this status via the EAX register.
When debugging a 32-bit (i386) process from a 64-bit (amd64)
GDB, the debugger fetches 64-bit registers even though the
process being debugged is 32-bit. Since we're debugging a 32-bit
target, only 32 bits are being saved in the register cache.
Now, ideally, GDB would save all 64-bits in the regcache and
then would be able to restore those same values when it comes
time to continue the target. I've looked into doing this, but
it's not easy and I don't see many benefits to doing so. One
benefit, however, would be that EAX would appear as a negative
value for doing syscall restarts.
At the moment, GDB is setting the high 32 bits of RAX (and other
registers too) to 0. So, when GDB restores EAX just prior to
a syscall restart, the high 32 bits of RAX are zeroed, thus making
it look like a positive value. For this particular purpose, we
need to sign extend EAX so that RAX will appear as a negative
value when EAX is set to -ERESTARTSYS. This in turn will cause
the signal handling code in the kernel to recognize -ERESTARTSYS
which will in turn cause the syscall to be restarted.
This commit is based on work by Jan Kratochvil from 2009:
https://sourceware.org/ml/gdb-patches/2009-11/msg00592.html
Jan's patch had the sign extension code in amd64-nat.c. Several
other native targets make use of this code, so it seemed better
to move the sign extension code to a linux specific file. I
also added similar code to gdbserver.
Another approach is to fix the problem in the kernel. Hui Zhu
tried to get a fix into the kernel back in 2014, but it was not
accepted. Discussion regarding this approach may be found here:
https://lore.kernel.org/patchwork/patch/457841/
Even if a fix were to be put into the kernel, we'd still need
some kind of fix in GDB in order to support older kernels.
Finally, I'll note that Fedora has been carrying a similar patch for
at least nine years. Other distributions, including RHEL and CentOS
have picked up this change and have been using it too.
gdb/ChangeLog:
* amd64-linux-nat.c (amd64_linux_collect_native_gregset): New
function.
(fill_gregset): Call amd64_linux_collect_native_gregset instead
of amd64_collect_native_gregset.
(amd64_linux_nat_target::store_registers): Likewise.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_fill_gregset): Sign extend EAX value
when using a 64-bit gdbserver.
|
|
I noticed that find_thread_in_random duplicates the code in
find_thread_in_random, so this patch changes the latter to use the
former.
There are two other spots in gdb that do this, but to unify all of
them would require switching some code from using the "iterate over"
idiom to using iterators.
Another possible improvement is that find_thread_in_random could be
made single-pass using reservoir sampling.
Tested by the buildbot.
gdb/gdbserver/ChangeLog
2019-04-09 Tom Tromey <tromey@adacore.com>
* linux-low.c (select_event_lwp): Use find_thread_in_random.
|
|
This replaces throw_exception with "throw;" when possible. This was
written by script. The rule that is followed is that uses of the
form:
catch (... &name)
{
...
throw_exception (name);
}
... can be rewritten. This should always be safe, because exceptions
are caught by const reference, and therefore can't be modified in the
body of the catch.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* valops.c (value_rtti_indirect_type): Replace throw_exception
with throw.
* tracefile-tfile.c (tfile_target_open): Replace throw_exception
with throw.
* thread.c (thr_try_catch_cmd): Replace throw_exception with
throw.
* target.c (target_translate_tls_address): Replace throw_exception
with throw.
* stack.c (frame_apply_command_count): Replace throw_exception
with throw.
* solib-spu.c (append_ocl_sos): Replace throw_exception with
throw.
* s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception
with throw.
* rs6000-tdep.c (rs6000_frame_cache)
(rs6000_epilogue_frame_cache): Replace throw_exception with throw.
* remote.c: Replace throw_exception with throw.
* record-full.c (record_full_message, record_full_wait_1)
(record_full_restore): Replace throw_exception with throw.
* record-btrace.c:
(get_thread_current_frame_id, record_btrace_start_replaying)
(cmd_record_btrace_bts_start, cmd_record_btrace_pt_start)
(cmd_record_btrace_start): Replace throw_exception with throw.
* parse.c (parse_exp_in_context_1): Replace throw_exception with
throw.
* linux-nat.c (detach_one_lwp, linux_resume_one_lwp)
(resume_stopped_resumed_lwps): Replace throw_exception with throw.
* linespec.c:
(find_linespec_symbols): Replace throw_exception with throw.
* infrun.c (displaced_step_prepare, resume): Replace
throw_exception with throw.
* infcmd.c (post_create_inferior): Replace throw_exception with
throw.
* inf-loop.c (inferior_event_handler): Replace throw_exception
with throw.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Replace throw_exception with throw.
* frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle)
(get_prev_frame_always, get_frame_pc_if_available)
(get_frame_address_in_block_if_available, get_frame_language):
Replace throw_exception with throw.
* frame-unwind.c (frame_unwind_try_unwinder): Replace
throw_exception with throw.
* eval.c (fetch_subexp_value, evaluate_var_value)
(evaluate_funcall, evaluate_subexp_standard): Replace
throw_exception with throw.
* dwarf2loc.c (call_site_find_chain)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval):
Replace throw_exception with throw.
* dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception
with throw.
* darwin-nat.c (darwin_attach_pid): Replace throw_exception with
throw.
* cp-abi.c (baseclass_offset): Replace throw_exception with throw.
* completer.c (complete_line_internal): Replace throw_exception
with throw.
* compile/compile-object-run.c (compile_object_run): Replace
throw_exception with throw.
* cli/cli-script.c (process_next_line): Replace throw_exception
with throw.
* btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace)
(btrace_enable, btrace_maint_update_pt_packets): Replace
throw_exception with throw.
* breakpoint.c (create_breakpoint, save_breakpoints): Replace
throw_exception with throw.
* break-catch-throw.c (re_set_exception_catchpoint): Replace
throw_exception with throw.
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Replace throw_exception with throw.
* aarch64-tdep.c (aarch64_make_prologue_cache)
(aarch64_make_stub_cache): Replace throw_exception with throw.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_detach_one_lwp): Replace throw_exception with
throw.
(linux_resume_one_lwp): Likewise.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
|
This changes the exception's "message" member to be a shared_ptr
wrapping a std::string. This allows removing the stack of exception
messages, because now exceptions will self-destruct when needed. This
also adds a noexcept copy constructor and operator= to gdb_exception,
plus a "what" method.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c (gdb_xml_parser::parse): Update.
* x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update.
* value.c (show_convenience): Update.
* unittests/cli-utils-selftests.c (test_number_or_range_parser)
(test_parse_flags_qcs): Update.
* thread.c (thr_try_catch_cmd): Update.
* target.c (target_translate_tls_address): Update.
* stack.c (print_frame_arg, read_frame_local, read_frame_arg)
(info_frame_command_core, frame_apply_command_count): Update.
* rust-exp.y (rust_lex_exception_test): Update.
* riscv-tdep.c (riscv_print_one_register_info): Update.
* remote.c (remote_target::enable_btrace): Update.
* record-btrace.c (record_btrace_enable_warn): Update.
* python/py-utils.c (gdbpy_convert_exception): Update.
* printcmd.c (do_one_display, print_variable_and_value): Update.
* mi/mi-main.c (mi_print_exception): Update.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
* linux-nat.c (linux_nat_target::attach): Update.
* linux-fork.c (class scoped_switch_fork_info): Update.
* infrun.c (displaced_step_prepare): Update.
* infcall.c (call_function_by_hand_dummy): Update.
* guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update.
* gnu-v3-abi.c (print_one_vtable): Update.
* frame.c (get_prev_frame_always): Update.
* f-valprint.c (info_common_command_for_block): Update.
* exec.c (try_open_exec_file): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Update.
* dwarf2-frame.c (dwarf2_build_frame_info): Update.
* dwarf-index-cache.c (index_cache::store)
(index_cache::lookup_gdb_index): Update.
* darwin-nat.c (maybe_cache_shell): Update.
* cp-valprint.c (cp_print_value_fields): Update.
* compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol)
(gcc_cplus_symbol_address): Update.
* compile/compile-c-symbols.c (gcc_convert_symbol)
(gcc_symbol_address, generate_c_for_for_one_variable): Update.
* common/selftest.c: Update.
* common/common-exceptions.h (struct gdb_exception) <message>: Now
a std::string.
(exception_try_scope_entry, exception_try_scope_exit): Don't
declare.
(struct exception_try_scope): Remove.
(TRY): Don't use exception_try_scope.
(struct gdb_exception): Add constructor, operator=.
<what>: New method.
(struct gdb_exception_RETURN_MASK_ALL)
(struct gdb_exception_RETURN_MASK_ERROR)
(struct gdb_exception_RETURN_MASK_QUIT): Add constructor.
(struct gdb_quit_bad_alloc): Update.
* common/common-exceptions.c (exception_none): Change
initializer.
(struct catcher) <state, exception>: Initialize inline.
<prev>: Remove member.
(current_catcher): Remove.
(catchers): New global.
(exceptions_state_mc_init): Simplify.
(catcher_pop): Remove.
(exceptions_state_mc, exceptions_state_mc_catch): Update.
(try_scope_depth, exception_try_scope_entry)
(exception_try_scope_exit): Remove.
(throw_exception_sjlj): Update.
(exception_messages, exception_messages_size): Remove.
(throw_it): Simplify.
(gdb_exception_sliced_copy): Remove.
(throw_exception_cxx): Update.
* cli/cli-script.c (script_from_file): Update.
* breakpoint.c (insert_bp_location, update_breakpoint_locations):
Update.
* ada-valprint.c (ada_val_print): Update.
* ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr)
(create_excep_cond_exprs): Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c (handle_btrace_general_set, handle_qxfer_btrace)
(handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup)
(captured_main, main): Update.
* gdbreplay.c (main): Update.
|
|
This patch fixes a build error due to a call to ppc_get_auxv that was
left over after linux_get_hwcap and linux_get_hwcap2 were introduced
in:
974c89e0882ddb03e294eca76a9e3d3bef90eacf gdbserver: Add
linux_get_hwcap
Because the missing call fetched AT_PHDR and not AT_HWCAP,
linux_get_auxv is now visible.
This use also required ppc_get_auxv to return a status variable
indicating that the AT_PHDR entry was not found separately from the
actual value of of the auxv entry. Therefore, the new linux_get_auxv
function is changed to return a status variable and write the entry
value to a pointer passed as an argument.
Note that linux_get_hwcap and linux_get_hwcap2 still use the return
value as both an indicator of that the entry wasn't found and as the
actual value of the entry.
gdb/gdbserver/ChangeLog:
2019-04-05 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-low.c (linux_get_auxv): Remove static. Return auxv entry
value in argument pointer, return 1 if the entry is found and 0
otherwise. Move comment.
(linux_get_hwcap, linux_get_hwcap2): Use modified linux_get_auxv.
* linux-low.h (linux_get_auxv): Declare.
* linux-ppc-low.c (is_elfv2_inferior): Use linux_get_auxv.
|
|
I noticed that "gdbserver --help" contains a few metasyntactic
variables that aren't in upper-case. This patch fixes them to conform
to the GNU standard.
gdb/gdbserver/ChangeLog
2019-04-05 Tom Tromey <tromey@adacore.com>
* server.c (gdbserver_usage): Use upper-case for metasyntactic
variables.
|
|
When using older compilers, AT_HWCAP2 may not be be defined.
It is defined in elf/common.h, however including this in
gdbserver/linux-low.c causes conflicts.
Manually add the define if it does not exist.
gdb/gdbserver/ChangeLog:
* linux-low.c (AT_HWCAP2): Add define if not already included.
|
|
In gdbserver, Tidy up calls to read HWCAP (and HWCAP2) by adding common
functions, removing the Arm, AArch64, PPC and S390 specific versions.
No functionality differences.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_get_hwcap): Remove function.
(aarch64_arch_setup): Call linux_get_hwcap.
* linux-arm-low.c (arm_get_hwcap): Remove function.
(arm_read_description): Call linux_get_hwcap.
* linux-low.c (linux_get_auxv): New function.
(linux_get_hwcap): Likewise.
(linux_get_hwcap2): Likewise.
* linux-low.h (linux_get_hwcap): New declaration.
(linux_get_hwcap2): Likewise.
* linux-ppc-low.c (ppc_get_auxv): Remove function.
(ppc_arch_setup): Call linux_get_hwcap.
* linux-s390-low.c (s390_get_hwcap): Remove function.
(s390_arch_setup): Call linux_get_hwcap.
|
|
Add the pauth registers to the regset lists.
Add a new regset type OPTIONAL_REGS which allows for the regset read to fail.
Once the read fails, it will not be checked again. This allows targets with
optional features to keep a single static regset_info structure.
gdb/ChangeLog:
* arch/aarch64.h (AARCH64_PAUTH_REGS_SIZE): New define.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_store_pauthregset): New function.
* linux-low.c (regsets_store_inferior_registers): Allow optional reads
to fail.
* linux-low.h (enum regset_type): Add OPTIONAL_REGS.
|
|
Add aarch64_get_hwcap functions for reading the HWCAP.
From this extract the PACA value and use this to enable pauth.
gdb/ChangeLog:
* aarch64-linux-nat.c
(aarch64_linux_nat_target::read_description): Read PACA hwcap.
* aarch64-linux-tdep.c
(aarch64_linux_core_read_description): Likewise.
(aarch64_linux_get_hwcap): New function.
* aarch64-linux-tdep.h (AARCH64_HWCAP_PACA): New define.
(aarch64_linux_get_hwcap): New declaration.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (AARCH64_HWCAP_PACA): New define.
(aarch64_get_hwcap): New function.
(aarch64_arch_setup): Read APIA hwcap.
|
|
Pointer Authentication is a new feature in AArch64 v8.3-a. When enabled in
the compiler, function return addresses will be mangled by the kernel.
Add register description xml and wire up to aarch64_linux_read_description.
This description includes the two pauth user registers.
Nothing yet uses the feature - that is added in later patches.
gdb/ChangeLog:
* aarch64-linux-nat.c
(aarch64_linux_nat_target::read_description): Add pauth param.
* aarch64-linux-tdep.c
(aarch64_linux_core_read_description): Likewise.
* aarch64-tdep.c (struct target_desc): Add in pauth.
(aarch64_read_description): Add pauth param.
(aarch64_gdbarch_init): Likewise.
* aarch64-tdep.h (aarch64_read_description): Likewise.
* arch/aarch64.c (aarch64_create_target_description): Likewise.
* arch/aarch64.h (aarch64_create_target_description): Likewise.
* features/Makefile: Add new files.
* features/aarch64-pauth.c: New file.
* features/aarch64-pauth.xml: New file.
gdb/doc/ChangeLog:
* gdb.texinfo: Describe pauth feature.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c (get_ipa_tdesc): Add pauth param.
(initialize_low_tracepoint): Likewise.
* linux-aarch64-low.c (aarch64_arch_setup): Likewise.
* linux-aarch64-tdesc-selftest.c (aarch64_tdesc_test): Likewise.
* linux-aarch64-tdesc.c (struct target_desc): Likewise.
(aarch64_linux_read_description): Likewise.
* linux-aarch64-tdesc.h (aarch64_linux_read_description): Likewise.
|
|
As on amd64, these registers hold the base address of the fs and gs
segments, respectively. For i386 these two registers are 32 bits.
gdb/ChangeLog:
* amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description):
Update calls to i386_target_description to add 'segments'
parameter.
* amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't
add segment base registers.
* arch/i386.c (i386_create_target_description): Add 'segments'
parameter to enable segment base registers.
* arch/i386.h (i386_create_target_description): Likewise.
* features/i386/32bit-segments.xml: New file.
* features/i386/32bit-segments.c: Generate.
* i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update
call to i386_target_description to add 'segments' parameter.
* i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise.
* i386-go32-tdep.c (i386_go32_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_read_description): Likewise.
* i386-tdep.c (i386_validate_tdesc_p): Add segment base registers
if feature is present.
(i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs.
Add 'segments' parameter to call to i386_target_description.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
(_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter
to call to i386_target_description.
* i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'.
(enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM.
Define I386_NUM_REGS.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
gdb/gdbserver/ChangeLog:
* linux-x86-tdesc.c (i386_linux_read_description): Update call to
i386_create_target_description for 'segments' parameter.
* lynx-i386-low.c (lynx_i386_arch_setup): Likewise.
* nto-x86-low.c (nto_x86_arch_setup): Likewise.
* win32-i386-low.c (i386_arch_setup): Likewise.
|
|
This changes iterate_over_lwps to use a gdb::function_view. This was
needed in order to make null_ptid and minus_one_ptid 'const'.
gdb/ChangeLog
2019-03-12 Tom Tromey <tromey@adacore.com>
* linux-nat.c (iterate_over_lwps): Update.
(stop_callback): Remove parameter.
(stop_wait_callback, detach_callback, resume_set_callback)
(select_singlestep_lwp_callback, set_ignore_sigint)
(status_callback, resumed_callback, resume_clear_callback)
(kill_callback, kill_wait_callback, linux_nat_stop_lwp): Remove
data parameter.
(linux_nat_target::detach, linux_nat_target::resume)
(linux_stop_and_wait_all_lwps, select_event_lwp)
(linux_nat_filter_event, linux_nat_wait_1)
(linux_nat_target::kill, linux_nat_target::stop)
(linux_nat_target::stop): Update.
(linux_nat_resume_callback): Change type.
(resume_stopped_resumed_lwps, count_events_callback)
(select_event_lwp_callback): Likewise.
(linux_stop_lwp, linux_nat_stop_lwp): Update.
* arm-linux-nat.c (struct update_registers_data): Remove.
(update_registers_callback): Change type.
(arm_linux_insert_hw_breakpoint1): Update.
* nat/x86-linux-dregs.c (update_debug_registers_callback): Remove
parameter.
(x86_linux_dr_set_addr): Update.
(x86_linux_dr_set_control): Update.
* nat/linux-nat.h (iterate_over_lwps_ftype): Remove parameter.
(iterate_over_lwps): Use gdb::function_view.
* nat/aarch64-linux-hw-point.c (struct
aarch64_dr_update_callback_param): Remove.
(debug_reg_change_callback): Change type.
(aarch64_notify_debug_reg_change): Update.
* s390-linux-nat.c (s390_refresh_per_info): Update.
gdb/gdbserver/ChangeLog
2019-03-12 Tom Tromey <tromey@adacore.com>
* linux-low.c (iterate_over_lwps): Update.
|
|
This removes the last cleanup from gdbserver, replacing it with
SCOPE_EXIT. This could perhaps be done in a different way, but this
approach was direct and obviously correct.
2019-03-06 Tom Tromey <tom@tromey.com>
* server.c (detach_or_kill_for_exit_cleanup): Remove parameter.
(captured_main): Use SCOPE_EXIT.
|
|
(for 'aarch64*-*-linux*' case)
On commit 8ecfd7bd4acd69213c06fac6de9af38299123547 ("Add parameter to
allow enabling/disabling selftests via configure") it seems that I
forgot to use the proper '$enable_unittest' variable when checking to
see whether to add selftest-related objects to 'srv_regobj'. This
causes a build failure on Aarch64 when 'development=false' (which is
the case for the 8.3 branch) and 'enable_unittest=true'.
This patch fixes the problem by using '$enable_unittest' instead of
'$development' when performing the check. As a reminder, it's
important to notice that '$enable_unittest's default value (i.e., when
the option '--enable-unit-tests' is not passed to configure) is the
same as '$development', so this patch doesn't affect the current
build.
I'd like to install this patch both on master and on the 8.3 branch.
OK?
gdb/gdbserver/ChangeLog:
2019-03-04 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.srv: Use '$enable_unittest' instead of '$development'
when checking whether to fill 'srv_regobj' on 'aarch64*-*-linux*'
case.
|
|
gdb/ChangeLog:
2019-03-02 Eli Zaretskii <eliz@gnu.org>
PR gdb/24292
* common/netstuff.c:
* gdbserver/gdbreplay.c
* gdbserver/remote-utils.c:
* ser-tcp.c:
* unittests/parse-connection-spec-selftests.c [USE_WIN32API]:
Include ws2tcpip.h instead of wsiapi.h and winsock2.h. Redefine
_WIN32_WINNT to 0x0501 if defined to a smaller value, as
'getaddrinfo' and 'freeaddrinfo' were not available before
Windows XP, and mingw.org's MinGW headers by default define
_WIN32_WINNT to 0x500.
|
|
I tried gdbreplay yesterday, but the remotelogfile I received was made
on Windows, so the lines were terminated with \r\n rather than plain
\n.
This patch changes gdbreplay to allow \r\n line termination when
reading the log file.
gdb/gdbserver/ChangeLog
2019-02-27 Tom Tromey <tromey@adacore.com>
* gdbreplay.c (logchar): Handle \r\n.
|
|
The recent BP/WP changes for AArch64 swapping the order in add_lwp()
so that the process was added before the lwp. This was due to the lwp
creation requiring the process data.
This also needs changing in linux_attach().
Also add additional checks to make sure cannot attach to the same
process twice. Add test case for this - do this by splitting
attach.exp into distinct pass and error case sections.
Fixes gdb.server/ext-attach.exp on Aarch64.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_attach): Add process before lwp.
* server.c (attach_inferior): Check if already attached.
gdb/testsuite/ChangeLog:
* gdb.base/attach.exp: Add double attach test.
|
|
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
|
|
The IPA objects currently may use gnulib replacement apis, which is
wrong: gnulib is not linked into the produced dso and it cannot be
because it is not built with -fPIC -fvisibility=hidden.
The gnulib replacement detection is broken under cross compilation:
for targets other than *-gnu*, replacements are enabled that depend
on execution time detection. This causes unnecessary build failure
when the target has proper support for the replaced api.
This fix tries to undo the replacements, which is tricky because the
gnulib headers are still used for various compile time fixups and
there is no simple knob in gnulib to only turn the replacements off.
Without this workaround gdb fails to cross build to non-gnu targets:
ld: tracepoint-ipa.o: in function `gdb_agent_helper_thread(void*)':
gdb/gdbserver/tracepoint.c:7221: undefined reference to `rpl_strerror'
...
Makefile:434: recipe for target 'libinproctrace.so' failed
gdb/gdbserver/ChangeLog:
PR gdb/23985
* Makefile.in (IPAGENT_CFLAGS): Add UNDO_GNULIB_CFLAGS.
(UNDO_GNULIB_CFLAGS): Undo gnulib replacements.
|
|
This reverts commit f084d335110408aa08ea06c7cb217ae19697db3d.
Accidently pushed. Reverted.
|
|
The recent BP/WP changes for AArch64 swapping the order in add_lwp()
so that the process was added before the lwp. This was due to the lwp
creation requiring the process data.
This also needs changing in linux_attach().
Fixes gdb.server/ext-attach.exp on Aarch64.
(This regression was hidden due to the racy nature of the gdb.server
tests - now they are no longer racy it'll be easier to spot. Also
checked X86).
gdb/gdbserver/ChangeLog:
2019-01-25 Alan Hayward <alan.hayward@arm.com>
* linux-low.c (linux_attach): Add process before lwp.
|
