| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are also some duplication on getting HW watchpoint/breakpoint
registers info between GDB and GDBserver. This patch moves them
to nat/aarch64-linux-hw-point.c.
Note that ENABLE_NLS is not defined in GDBserver, so it should be OK
to use _( markup.
gdb:
2015-07-21 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
Move it to nat/aarch64-linux-hw-point.c.
(aarch64_linux_child_post_startup_inferior): Update.
* nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity):
New function.
* nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity):
Declare it.
gdb/gdbserver:
2015-07-21 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_arch_setup): Remove code and call
aarch64_linux_get_debug_reg_capacity.
|
|
When I look at test fails related to watchpoint on aarch64-linux,
I find there are some code duplicates between GDB and GDBserver.
This patch is to move some of them to a nat/aarch64-linux-hw-point.{h,c}.
The only change I do is about the dr_changed_t typedef, which was
ULONGEST in GDB and 'unsigned long long' in GDBserver. Each bit
of dr_changed_t represents a status of each HW breakpoint or
watchpoint register, and the max number of HW breakpoint or watchpoint
registers is 16, so the width of 'unsigned long long' is sufficient.
gdb:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* Makefile.in (HFILES_NO_SRCDIR): Add
nat/aarch64-linux-hw-point.h.
(aarch64-linux-hw-point.o): New rule.
* nat/aarch64-linux-hw-point.h: New file.
* nat/aarch64-linux-hw-point.c: New file.
* aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
(AARCH64_HWP_ALIGNMENT): Likewise.
(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
(struct aarch64_debug_reg_state): Likewise.
(struct arch_lwp_info): Likewise.
(aarch64_linux_set_debug_regs): Likewise.
(aarch64_notify_debug_reg_change): Remove static.
(aarch64_align_watchpoint): Likewise.
(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
(aarch64_watchpoint_length): Likewise.
(aarch64_point_encode_ctrl_reg): Likewise
(aarch64_point_is_aligned): Likewise.
(aarch64_dr_state_insert_one_point): Likewise.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Likewise.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Likewise.
* config/aarch64/linux.mh (NAT_FILE): Add
aarch64-linux-hw-point.o.
gdb/gdbserver:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* Makefile.in (aarch64-linux-hw-point.o): New rule.
* configure.srv (srv_tgtobj): Append aarch64-linux-hw-point.o.
* linux-aarch64-low.c: Include nat/aarch64-linux-hw-point.h.
(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
(AARCH64_HWP_ALIGNMENT): Likewise.
(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
(struct aarch64_debug_reg_state): Likewise.
(struct arch_lwp_info): Likewise.
(aarch64_align_watchpoint): Likewise.
(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
(aarch64_watchpoint_length): Likewise.
(aarch64_point_encode_ctrl_reg): Likewise
(aarch64_point_is_aligned): Likewise.
(aarch64_align_watchpoint): Likewise.
(aarch64_linux_set_debug_regs):
(aarch64_dr_state_insert_one_point): Likewise.
(aarch64_dr_state_remove_one_point): Likewise.
(aarch64_handle_breakpoint): Likewise.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Likewise.
|
|
Some functions on handling HW watchpoint in GDB and GDBserver looks the
same except the code getting debug register state from current inferior.
In GDB, we get debug register state like this:
state = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
while in GDBserver, we get debug register state like this:
state = aarch64_get_debug_reg_state ();
This patch is to move two lines above out of some functions, and pass
aarch64_debug_reg_state to these functions, in this way, these functions
are the same, and can be moved to a common place.
gdb:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument
state and don't call aarch64_get_debug_reg_state. All callers
update.
(aarch64_linux_insert_hw_breakpoint): Call
aarch64_get_debug_reg_state earlier.
(aarch64_linux_remove_hw_breakpoint): Likewise.
(aarch64_handle_aligned_watchpoint): Add argument state and
don't call aarch64_get_debug_reg_state. All callers update.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Add argument state.
(aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state
earlier.
(aarch64_linux_remove_watchpoint): Likewise.
gdb/gdbserver:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_handle_breakpoint): Add argument state
and don't aarch64_get_debug_reg_state. All callers update.
(aarch64_handle_aligned_watchpoint): Likewise.
(aarch64_handle_unaligned_watchpoint): Likewise.
(aarch64_handle_watchpoint): Likewise.
(aarch64_insert_point): Call aarch64_get_debug_reg_state earlier.
(aarch64_remove_point): Likewise.
|
|
Some functions in aarch64-linux-nat.c and linux-aarch64-low.c looks
the same except for the code printing debug message. In GDB, we use
fprintf_unfiltered (gdb_stdlog, ...) while in GDBserver, we use
fprintf (stderr, ...). This patch is to change them to use debug_printf
so that these functions are the same, and I can move them to a common
place in the following patch.
gdb:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use
debug_printf.
(aarch64_handle_unaligned_watchpoint): Likewise.
gdb/gdbserver:
2015-07-17 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_show_debug_reg_state): Use
debug_printf.
(aarch64_handle_unaligned_watchpoint): Likewise.
|
|
ddc98fbf2fd9e244a215a4d09e559180dc573a14 Create empty nat/linux-maps.[ch] and common/target-utils.[ch]
6e5b4429db0d66e2d0b27e1bcfe4709f3dae73ed Move gdb_regex* to common/
f7af1fcd759fa126612018a5916cf808df7bb8bc Prepare linux_find_memory_regions_full & co. for move
9904185cfde13d6c6849f1f042c8e3b74974cf08 Move linux_find_memory_regions_full & co.
700ca40f6fc1addd7238f4ab57f76c095ad3c99f gdbserver build-id attribute generator
ca5268b6be265580b91ef75c1a1a9815f581ae42 Validate symbol file using build-id
0a94970d663a053c523f23ac0d71deb25a77f709 Tests for validate symbol file using build-id
gdb/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert the previous 6 commits:
Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
Move gdb_regex* to common/
Prepare linux_find_memory_regions_full & co. for move
Move linux_find_memory_regions_full & co.
gdbserver build-id attribute generator
Validate symbol file using build-id
gdb/gdbserver/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert the previous 3 commits:
Move gdb_regex* to common/
Move linux_find_memory_regions_full & co.
gdbserver build-id attribute generator
gdb/doc/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert the previous 2 commits:
gdbserver build-id attribute generator
Validate symbol file using build-id
gdb/testsuite/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert the previous commit:
Tests for validate symbol file using build-id.
|
|
Producer part of the new "build-id" XML attribute.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* features/library-list-svr4.dtd (library-list-svr4): New
'build-id' attribute.
gdb/doc/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* gdb.texinfo (Library List Format for SVR4 Targets): Add
'build-id' in description, example, new attribute in dtd.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* linux-low.c (nat/linux-maps.h, search.h, rsp-low.h): Include.
(ElfXX_Ehdr, ElfXX_Phdr, ElfXX_Nhdr): New.
(ELFXX_FLD, ELFXX_SIZEOF, ELFXX_ROUNDUP, BUILD_ID_INVALID): New.
(find_phdr): New.
(get_dynamic): Use find_pdhr to traverse program headers.
(struct mapping_entry, mapping_entry_s, free_mapping_entry_vec)
(compare_mapping_entry_range, struct find_memory_region_callback_data)
(read_build_id, find_memory_region_callback, lrfind_mapping_entry)
(get_hex_build_id): New.
(linux_qxfer_libraries_svr4): Add optional build-id attribute
to reply XML document.
|
|
This should be just a move with no changes.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Move linux_find_memory_regions_full & co.
* linux-tdep.c (nat/linux-maps.h): Include.
(gdb_regex.h): Remove the include.
(enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
(linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
(linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
* nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
and target/target.h.
(struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
(linux_find_memory_regions_full): Move from linux-tdep.c.
* nat/linux-maps.h (read_mapping): New declaration.
(linux_find_memory_region_ftype, enum filterflags): Moved from
linux-tdep.c.
(linux_find_memory_regions_full): New declaration.
* target.c (target/target-utils.h): Include.
(read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
(read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
definitions to target/target-utils.c.
* target.h (target_fileio_read_stralloc): Move it to target/target.h.
* target/target-utils.c (read_alloc, read_stralloc): Move definitions
from target.c.
* target/target-utils.h (read_alloc_pread_ftype): New typedef.
(read_alloc): New declaration.
(read_stralloc_func_ftype): New typedef.
(read_stralloc): New declaration.
* target/target.h (target_fileio_read_stralloc): Move it from target.h.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
* target.c: Include target/target-utils.h and fcntl.h.
(target_fileio_read_stralloc_1_pread, target_fileio_read_stralloc_1)
(target_fileio_read_stralloc): New functions.
|
|
Later patches need regex support also in gdbserver.
gdb/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
common/gdb_regex.h.
(COMMON_OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
--without-included-regex and USE_INCLUDED_REGEX.
* common/gdb_regex.c: New file from utils.c functions.
* common/gdb_regex.h: Move it here from gdb_regex.h, update include
file wrapping define name.
* configure: Rebuilt.
* configure.ac (gdb_use_included_regex, --without-included-regex)
(USE_INCLUDED_REGEX): Move them to common/common.m4.
* gdb_regex.h: Move it to common/gdb_regex.h.
* utils.c: Remove include gdb_regex.h.
(do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
(compile_rx_or_error): Move them to common/gdb_regex.c.
gdb/gdbserver/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* config.in: Rebuilt.
* configure: Rebuilt.
|
|
Prepare new files for later move.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
* Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h,
common/target-utils.h.
(COMMON_OBS): Add target-utils.o.
(linux-maps.o, target-utils.o): New.
* target/target-utils.c: New file.
* target/target-utils.h: New file.
* config/i386/linux.mh (NATDEPFILES): Add linux-maps.o.
* config/i386/linux64.mh (NATDEPFILES): Ditto.
* nat/linux-maps.c: New file.
* nat/linux-maps.h: New file.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
* Makefile.in (OBS): Add target-utils.o.
(linux-maps.o, target-utils.o): New.
* configure.srv (srv_linux_obj): Add linux-maps.o.
|
|
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_supports_range_stepping): New
function, return 1.
(the_low_target): Install it.
|
|
gdb/gdbserver/Changelog:
* linux-aarch64-low.c (aarch64_supports_range_stepping): New
function, return 1.
(the_low_target): Install it.
|
|
If the process disappears (e.g., killed with "kill -9" from the shell)
while it was stopped under GDBserver's control, and the GDBserver
tries to kill it, GDBserver asserts:
(gdb) shell kill -9 23084
(gdb) kill
...
Killing process(es): 23084
/home/pedro/gdb/mygit/src/gdb/gdbserver/linux-low.c:972: A problem internal to GDBserver has been detected.
kill_wait_lwp: Assertion `res > 0' failed.
...
gdb/gdbserver/ChangeLog:
2015-07-14 Pedro Alves <palves@redhat.com>
* linux-low.c (kill_wait_lwp): Don't assert if waitpid fails.
Instead, ignore ECHILD, and throw an error for other errnos.
|
|
Building with C++ catches a buglet here:
../../../src/gdb/gdbserver/event-loop.c:205:19: warning: invalid conversion from ‘gdb_client_data {aka void*}’ to ‘void**’ [-fpermissive]
event_ptr->data = data;
^
This works in practice because gdb_client_data is a pointer already
(hence in C we get an implicit conversion), and nothing deferences the
pointer. It's passed from client at event registration/creation time,
only to pass straight back to client callback.
Well, that and nothing in gdbserver uses the event data anyway.
gdb/gdbserver/ChangeLog:
2015-07-10 Pedro Alves <palves@redhat.com>
* event-loop.c (struct callback_event) <data>: Change type to
gdb_client_data instance instead of gdb_client_data pointer.
(append_callback_event): Adjust.
|
|
This patch cleans up the comments for each linux_target_ops methods. We
should mention which method each function implements but there is no
need to duplicate information already mentionned in the base target_ops
or linux_target_ops definitions.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c: Add comments for each linux_target_ops
method. Remove comments already covered in target_ops and
linux_target_ops definitions.
(the_low_target): Add comments for each unimplemented method.
|
|
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_supports_tracepoints): New
function. Return 1.
(the_low_target): Install it.
|
|
Hi,
I happen to read the comments in regs_info below,
struct regs_info
{
...
/* Info used when accessing registers with PTRACE_PEEKUSER /
PTRACE_POKEUSER. This can be NULL if all registers are
transferred with regsets .*/
struct usrregs_info *usrregs;
that usrregs can be NULL if all registers are transferred with
regsets, which is exactly what aarch64-linux does. This patch
is to set usrregs to NULL in regs_info and remove
aarch64_usrregs_info and aarch64_regmap.
gdb/gdbserver:
2015-07-09 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_regmap): Remove.
(aarch64_usrregs_info): Remove.
(regs_info): Set field usrregs to NULL.
|
|
Adds a new command "record btrace pt" to configure the kernel to use
Intel(R) Processor Trace instead of Branch Trace Strore.
The "record btrace" command chooses the tracing format automatically.
Intel(R) Processor Trace support requires Linux 4.1 and libipt.
gdb/
* NEWS: Announce new commands "record btrace pt" and "record pt".
Announce new options "set|show record btrace pt buffer-size".
* btrace.c: Include "rsp-low.h".
Include "inttypes.h".
(btrace_add_pc): Add forward declaration.
(pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
(pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
(btrace_compute_ftrace_pt): New.
(btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
(check_xml_btrace_version): Update version check.
(parse_xml_raw, parse_xml_btrace_pt_config_cpu)
(parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
(btrace_pt_config_cpu_attributes, btrace_pt_config_children)
(btrace_pt_children): New.
(btrace_children): Add support for "pt".
(parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
(btrace_conf_children): Add support for "pt".
* btrace.h: Include "intel-pt.h".
(btrace_pt_error): New.
* common/btrace-common.c (btrace_format_string, btrace_data_fini)
(btrace_data_empty): Support BTRACE_FORMAT_PT.
* common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
(struct btrace_config_pt): New.
(struct btrace_config)<pt>: New.
(struct btrace_data_pt_config, struct btrace_data_pt): New.
(struct btrace_data)<pt>: New.
* features/btrace-conf.dtd (btrace-conf)<pt>: New.
(pt): New.
* features/btrace.dtd (btrace)<pt>: New.
(pt, pt-config, cpu): New.
* nat/linux-btrace.c (perf_event_read, perf_event_read_all)
(perf_event_pt_event_type, kernel_supports_pt)
(linux_supports_pt): New.
(linux_supports_btrace): Support BTRACE_FORMAT_PT.
(linux_enable_bts): Free tinfo on error.
(linux_enable_pt): New.
(linux_enable_btrace): Support BTRACE_FORMAT_PT.
(linux_disable_pt): New.
(linux_disable_btrace): Support BTRACE_FORMAT_PT.
(linux_fill_btrace_pt_config, linux_read_pt): New.
(linux_read_btrace): Support BTRACE_FORMAT_PT.
* nat/linux-btrace.h (struct btrace_tinfo_pt): New.
(struct btrace_target_info)<pt>: New.
* record-btrace.c (set_record_btrace_pt_cmdlist)
(show_record_btrace_pt_cmdlist): New.
(record_btrace_print_pt_conf): New.
(record_btrace_print_conf): Support BTRACE_FORMAT_PT.
(btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
(cmd_record_btrace_pt_start): New.
(cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
(_initialize_record_btrace): Add new commands.
* remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
(remote_protocol_features): Add "Qbtrace:pt".
Add "Qbtrace-conf:pt:size".
(remote_supports_btrace): Support BTRACE_FORMAT_PT.
(btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
(remote_enable_btrace): Support BTRACE_FORMAT_PT.
(_initialize_remote): Add new commands.
gdbserver/
* linux-low.c: Include "rsp-low.h"
(linux_low_encode_pt_config, linux_low_encode_raw): New.
(linux_low_read_btrace): Support BTRACE_FORMAT_PT.
(linux_low_btrace_conf): Support BTRACE_FORMAT_PT.
(handle_btrace_enable_pt): New.
(handle_btrace_general_set): Support "pt".
(handle_btrace_conf_general_set): Support "pt:size".
doc/
* gdb.texinfo (Process Record and Replay): Spell out that variables
and registers are not available during btrace replay.
Describe the new "record btrace pt" command.
Describe the new "set|show record btrace pt buffer-size" options.
(General Query Packets): Describe the new Qbtrace:pt and
Qbtrace-conf:pt:size packets.
Expand "bts" to "Branch Trace Store".
Update the branch trace DTD.
|
|
This patch lets GDBServer handle software breakpoints instead of relying
on GDB.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_supports_z_point_type): Enable for
Z_PACKET_SW_BP.
|
|
GDB uses a "brk #0" instruction to perform a software breakpoint while
GDBServer uses an illegal instruction. Both instructions should match.
When enabling support for the 'Z0' packet, we let GDBServer insert the
breakpoint instruction instead of GDB. And in case of permanent
breakpoints for example, GDB will check if a breakpoint is inserted in the
inferior with `program_breakpoint_here_p (gdbarch, address)', and
compare the instruction read from the inferior with the breakpoint
instruction.
On AArch64, instructions are always little endian so we need to
represent it as an array of bytes, as done in aarch64-tdep.c.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c: Remove comment about endianness.
(aarch64_breakpoint): Change type to gdb_byte[]. Set to "brk #0".
(aarch64_breakpoint_at): Change type of insn to gdb_byte[]. Use
memcmp.
|
|
stdint.h was added to common-defs.h some months ago and should
no longer be included directly by any file.
gdb_assert.h was added to common-defs.h nearly a year ago, but
three includes have crept in since then.
This commit removes all such redundant include directives.
gdb/ChangeLog:
* common/buffer.c (stdint.h): Do not include.
* common/print-utils.c (stdint.h): Likewise.
* compile/compile-c-symbols.c (gdb_assert.h): Likewise.
* compile/compile-c-types.c (gdb_assert.h): Likewise.
* ft32-tdep.c (gdb_assert.h): Likewise.
* guile/scm-utils.c (stdint.h): Likewise.
* i386-linux-tdep.c (stdint.h): Likewise.
* i386-tdep.c (stdint.h): Likewise.
* nat/linux-btrace.c (stdint.h): Likewise.
* nat/linux-btrace.h (stdint.h): Likewise.
* nat/linux-ptrace.c (stdint.h): Likewise.
* nat/mips-linux-watch.h (stdint.h): Likewise.
* ppc-linux-nat.c (stdint.h): Likewise.
* python/python-internal.h (stdint.h): Likewise.
* stub-termcap.c (stdlib.h): Likewise.
* target/target.h (stdint.h): Likewise.
* xtensa-linux-nat.c (stdint.h): Likewise.
gdb/gdbserver/ChangeLog:
* linux-i386-ipa.c (stdint.h): Do not include.
* lynx-i386-low.c (stdint.h): Likewise.
* lynx-ppc-low.c (stdint.h): Likewise.
* mem-break.c (stdint.h): Likewise.
* thread-db.c (stdint.h): Likewise.
* tracepoint.c (stdint.h): Likewise.
* win32-low.c (stdint.h): Likewise.
|
|
Adapt code in remote.c to take into account addressable unit size when
reading/writing memory.
A few variables are renamed and suffixed with _bytes or _units. This
way, it's more obvious if there is any place where we add or compare
values of different kinds (which would be a mistake).
gdb/ChangeLog:
* common/rsp-low.c (needs_escaping): New.
(remote_escape_output): Add unit_size parameter. Refactor to
support multi-byte addressable units. Rename parameters.
* common/rsp-low.h (remote_escape_output): Add unit_size
parameter and rename others. Update doc.
* remote.c (align_for_efficient_write): New.
(remote_write_bytes_aux): Add unit_size parameter and use it.
Rename some variables. Update doc.
(remote_xfer_partial): Get unit size and use it.
(remote_read_bytes_1): Add unit_size parameter and use it.
Rename some variables. Update doc.
(remote_write_bytes): Same.
(remote_xfer_live_readonly_partial): Same.
(remote_read_bytes): Same.
(remote_flash_write): Update call to remote_write_bytes_aux.
(remote_write_qxfer): Update call to remote_escape_output.
(remote_search_memory): Same.
(remote_hostio_pwrite): Same.
gdb/gdbserver/ChangeLog:
* server.c (write_qxfer_response): Update call to
remote_escape_output.
|
|
gdb/ChangeLog
2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Merge multiple hex conversions.
* monitor.c: Include rsp-low.h.
(fromhex): Remove definition.
gdb/gdbserver/ChangeLog
2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Merge multiple hex conversions.
* gdbreplay.c (tohex): Rename to 'fromhex'.
(logchar): Use fromhex.
|
|
While reimplementing <library-list/> I found from expat-2.0.1-11.fc15.x86_64:
warning: while parsing target library list (at line 1): Required attribute "version" of <library-list-svr4> not specified
I believe the same bug has to apply for existing FSF gdbserver but I do not
have any <library-list/> platform to test it (I did not try to build MinGW).
features/library-list.dtd:
<!ATTLIST library-list version CDATA #FIXED "1.0">
http://www.xml.com/pub/a/98/10/guide0.html?page=3 says:
In this case, the attribute is not required, but if it occurs, it must
have the specified value.
Which would suggest gdbserver is right but solib-target.c is wrong. One could
also make gdbserver explicit for the version (if those 14 bytes are not of
a concern).
gdb/ChangeLog
2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
* solib-target.c (library_list_start_list): Do not dereference
variable version in its initialization. Make the VERSION check handle
NULL.
(library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
gdb/gdbserver/ChangeLog
2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
* server.c (handle_qxfer_libraries): Set `version' attribute for
<library-list>.
|
|
This commit implements the "vFile:setfs" packet in gdbserver.
gdb/gdbserver/ChangeLog:
* target.h (struct target_ops) <multifs_open>: New field.
<multifs_unlink>: Likewise.
<multifs_readlink>: Likewise.
* linux-low.c (nat/linux-namespaces.h): New include.
(linux_target_ops): Initialize the_target->multifs_open,
the_target->multifs_unlink and the_target->multifs_readlink.
* hostio.h (hostio_handle_new_gdb_connection): New declaration.
* hostio.c (hostio_fs_pid): New static variable.
(hostio_handle_new_gdb_connection): New function.
(handle_setfs): Likewise.
(handle_open): Use the_target->multifs_open as appropriate.
(handle_unlink): Use the_target->multifs_unlink as appropriate.
(handle_readlink): Use the_target->multifs_readlink as
appropriate.
(handle_vFile): Handle vFile:setfs packets.
* server.c (handle_query): Call hostio_handle_new_gdb_connection
after target_handle_new_gdb_connection.
|
|
This commit introduces new shared files nat/linux-namespaces.[ch]
containing code to support Linux namespaces that will be used by
both GDB and gdbserver.
gdb/ChangeLog:
* configure.ac (AC_CHECK_FUNCS): Add setns.
* config.in: Regenerate.
* configure: Likewise.
* nat/linux-namespaces.h: New file.
* nat/linux-namespaces.c: Likewise.
* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
(linux-namespaces.o): New rule.
* config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
* config/arm/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mh (NATDEPFILES): Likewise.
* config/m32r/linux.mh (NATDEPFILES): Likewise.
* config/m68k/linux.mh (NATDEPFILES): Likewise.
* config/mips/linux.mh (NATDEPFILES): Likewise.
* config/pa/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
* config/s390/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux64.mh (NATDEPFILES): Likewise.
* config/tilegx/linux.mh (NATDEPFILES): Likewise.
* config/xtensa/linux.mh (NATDEPFILES): Likewise.
gdb/gdbserver/ChangeLog:
* configure.ac (AC_CHECK_FUNCS): Add setns.
* config.in: Regenerate.
* configure: Likewise.
* Makefile.in (SFILES): Add nat/linux-namespaces.c.
(linux-namespaces.o): New rule.
* configure.srv (srv_linux_obj): Add linux-namespaces.o.
|
|
inf_child_fileio_open and its gdbserver equivalent both assume that
the mode_t bits defined in gdb/fileio.h are the same as those used
by the open system call, but there is no mechanism to ensure this is
the case. This commit adds a conversion function to handle systems
where the File-I/O definitions do not align with the host's.
gdb/ChangeLog:
* common/fileio.h (fileio_to_host_mode): New declaration.
* common/fileio.c (fileio_to_host_mode): New Function.
* inf-child.c (inf_child_fileio_open): Process mode argument
with fileio_to_host_mode.
gdb/gdbserver/ChangeLog:
* hostio.c (handle_open): Process mode argument with
fileio_to_host_mode.
|
|
Macros PTRACE_GETREGSET and PTRACE_SETREGSET are defined locally in
some places in GDB and GDBserver. This patch is to move them to
nat/linux-ptrace.h to avoid duplication.
gdb:
2015-06-01 Yao Qi <yao.qi@linaro.org>
* amd64-linux-nat.c: Include "nat/linux-ptrace.h".
* i386-linux-nat.c: Likewise.
* nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
* s390-linux-nat.c: Include "nat/linux-ptrace.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
* x86-linux-nat.c: Include "nat/linux-ptrace.h".
* x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
gdb/gdbserver:
2015-06-01 Yao Qi <yao.qi@linaro.org>
* linux-s390-low.c (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
* linux-x86-low.c: Likewise.
|
|
This patch fixes some intermittent test failures in
gdb.base/foll-vfork.exp where a vfork child would be (incorrectly)
resumed when handling the vfork event. In this case the result
was a subsequent event reported to the client side as a SIGTRAP
delivered to the as-yet-unknown child thread.
The new thread was resumed (incorrectly) in linux-low.c when
resume_stopped_resumed_lwps was called from
linux_wait_for_event_filtered after the vfork event had been
handled in handle_extended_wait.
Gdbserver/linux-low.c's add_thread function creates threads with
last_resume_kind == resume_continue by default. This field is
used by resume_stopped_resumed_lwps to decide whether to perform
the resume:
static void
resume_stopped_resumed_lwps (struct inferior_list_entry *entry) {
struct thread_info *thread = (struct thread_info *) entry;
struct lwp_info *lp = get_thread_lwp (thread);
if (lp->stopped
&& !lp->status_pending_p
&& thread->last_resume_kind != resume_stop
&& thread->last_status.kind == TARGET_WAITKIND_IGNORE)
{
So the fix is to make sure to set thread->last_resume_kind to
resume_stop. Here we do that for new fork children in
gdbserver/linux-low.c:handle_extended_wait.
In addition, it seemed prudent to initialize lwp_info.status_pending_p
for the new fork child. I also rearranged the initialization code
so that all of the lwp_info initialization was together, rather than
intermixed with thread_info and process_info initialization.
Tested native, native-gdbserver, native-extended-gdbserver on
x86_64 GNU/Linux.
gdb/gdbserver/
* linux-low.c (handle_extended_wait): Initialize
thread_info.last_resume_kind for new fork children.
|
|
Fixes:
In file included from ../../../binutils-gdb/gdb/gdbserver/server.h:61:0,
from ../../../binutils-gdb/gdb/gdbserver/server.c:19:
../../../binutils-gdb/gdb/gdbserver/target.h:442:50: error: second operand to the conditional operator is of type 'void', but the third operand is neither a throw-expression nor of type 'void'
(*the_target->handle_new_gdb_connection) () : 0)
^
Reported by Yuanhui Zhang.
gdb/gdbserver/ChangeLog:
2015-05-15 Pedro Alves <palves@redhat.com>
* target.h (target_handle_new_gdb_connection): Rewrite using if
wrapped in do/while.
|
|
Fix build errors introduced by
https://sourceware.org/ml/gdb-patches/2015-05/msg00281.html, which
didn't account for the change of the name of the struct process_info
field 'private' to 'priv' made in
https://sourceware.org/ml/gdb-patches/2015-02/msg00829.html.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_linux_new_fork): Change reference
to process_info.private to process_info.priv.
* linux-arm-low.c (arm_new_fork): Likewise.
* linux-mips-low.c (mips_linux_new_fork): Likewise.
|
|
The following patch...
| proc-service, extern "C"
|
| libthread_db.so calls symbols in the client (GDB), through the
| proc-service interface. These routines must have extern "C" linkage
| so their symbol names are not mangled when GDB is built as a C++
| program. On the GDBserver side, we were missing fallback declarations for
| all these symbols.
|
| gdb/ChangeLog:
|
| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
|
| gdb/gdbserver/ChangeLog:
| 2015-02-27 Pedro Alves <palves@redhat.com>
|
| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
| [!HAVE_PROC_SERVICE_H] (struct ps_prochandle): Forward declare.
| [!HAVE_PROC_SERVICE_H] (ps_pdread, ps_pdwrite, ps_ptread)
| ps_ptwrite, ps_lgetregs, ps_lsetregs, ps_lgetfpregs)
| (ps_lsetfpregs, ps_getpid)
| (ps_get_thread_area, ps_pglobal_lookup, ps_pstop, ps_pcontinue)
| (ps_lstop, ps_lcontinue, ps_lgetxregsize, ps_lgetxregs)
| (ps_lsetxregs, ps_plog): Declare.
... added a number of declarations which do not compile when cross-
compiling GDBserver on arm-android. The problem comes from type
prfpregset_t not being declared:
/[...]/gdbserver/gdb_proc_service.h:98:47:
error: unknown type name 'prfpregset_t'
After searching through the includes of the install we have,
I could not find that type being declared anywhere. So I did
the same as for prgregset_t, and created the typedef if the
type isn't declared.
gdb/gdbserver/ChangeLog:
* configure.ac: Add prfpregset_t BFD_HAVE_SYS_PROCFS_TYPE check.
* configure, config.in: Regenerate.
* gdb_proc_service.h [HAVE_PRFPREGSET_T] (prfpregset_t):
Declare typedef.
|
|
This patch implements follow-fork for vfork on extended-remote Linux targets.
The implementation follows the native implementation as much as possible.
Most of the work is done on the GDB side in the existing code now in
infrun.c. GDBserver just has to report the events and do a little
bookkeeping.
Implementation includes:
* enabling VFORK events by adding ptrace options for VFORK and VFORK_DONE
to linux-low.c:linux_low_ptrace_options.
* handling VFORK and VFORK_DONE events in linux-low.c:handle_extended_wait
and reporting them to GDB.
* including VFORK and VFORK_DONE events in the predicate
linux-low.c:extended_event_reported.
* adding support for VFORK and VFORK_DONE events in RSP by adding stop
reasons "vfork" and "vforkdone" to the 'T' Stop Reply Packet in both
gdbserver/remote-utils.c and gdb/remote.c.
Tested on x64 Ubuntu Lucid, native, remote, extended-remote.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Handle PTRACE_EVENT_FORK and
PTRACE_EVENT_VFORK_DONE.
(linux_low_ptrace_options, extended_event_reported): Add vfork
events.
* remote-utils.c (prepare_resume_reply): New stop reasons "vfork"
and "vforkdone" for RSP 'T' Stop Reply Packet.
* server.h (report_vfork_events): Declare
global variable.
gdb/ChangeLog:
* remote.c (remove_vfork_event_p): New function.
(remote_follow_fork): Add vfork event type to event checking.
(remote_parse_stop_reply): New stop reasons "vfork" and
"vforkdone" for RSP 'T' Stop Reply Packet.
|
|
This patch implements the architecture-specific pieces of follow-fork
for remote and extended-remote Linux targets, which in the current
implementation copyies the parent's debug register state into the new
child's data structures. This is required for x86, arm, aarch64, and
mips.
This follows the native implementation as closely as possible by
implementing a new linux_target_ops function 'new_fork', which is
analogous to 'linux_nat_new_fork' in linux-nat.c. In gdbserver, the debug
registers are stored in the process list, instead of an
architecture-specific list, so the function arguments are process_info
pointers instead of an lwp_info and a pid as in the native implementation.
In the MIPS implementation the debug register mirror is stored differently
from x86, ARM, and aarch64, so instead of doing a simple structure assignment
I had to clone the list of watchpoint structures.
Tested using gdb.threads/watchpoint-fork.exp on x86, and ran manual tests
on a MIPS board and an ARM board. Aarch64 hasn't been tested.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_linux_new_fork): New function.
(the_low_target) <new_fork>: Initialize new member.
* linux-arm-low.c (arm_new_fork): New function.
(the_low_target) <new_fork>: Initialize new member.
* linux-low.c (handle_extended_wait): Call new target function
new_fork.
* linux-low.h (struct linux_target_ops) <new_fork>: New member.
* linux-mips-low.c (mips_add_watchpoint): New function
extracted from mips_insert_point.
(the_low_target) <new_fork>: Initialize new member.
(mips_linux_new_fork): New function.
(mips_insert_point): Call mips_add_watchpoint.
* linux-x86-low.c (x86_linux_new_fork): New function.
(the_low_target) <new_fork>: Initialize new member.
|
|
This patch implements basic support for follow-fork and detach-on-fork on
extended-remote Linux targets. Only 'fork' is supported in this patch;
'vfork' support is added n a subsequent patch. This patch depends on
the previous patches in the patch series.
Sufficient extended-remote functionality has been implemented here to pass
gdb.base/multi-forks.exp, as well as gdb.base/foll-fork.exp with the
catchpoint tests commented out. Some other fork tests fail with this
patch because it doesn't provide the architecture support needed for
watchpoint inheritance or fork catchpoints.
The implementation follows the same general structure as for the native
implementation as much as possible.
This implementation includes:
* enabling fork events in linux-low.c in initialize_low and
linux_enable_extended_features
* handling fork events in gdbserver/linux-low.c:handle_extended_wait
- when a fork event occurs in gdbserver, we must do the full creation
of the new process, thread, lwp, and breakpoint lists. This is
required whether or not the new child is destined to be
detached-on-fork, because GDB will make target calls that require all
the structures. In particular we need the breakpoint lists in order
to remove the breakpoints from a detaching child. If we are not
detaching the child we will need all these structures anyway.
- as part of this event handling we store the target_waitstatus in a new
member of the parent lwp_info structure, 'waitstatus'. This
is used to store extended event information for reporting to GDB.
- handle_extended_wait is given a return value, denoting whether the
handled event should be reported to GDB. Previously it had only
handled clone events, which were never reported.
* using a new predicate in gdbserver to control handling of the fork event
(and eventually all extended events) in linux_wait_1. The predicate,
extended_event_reported, checks a target_waitstatus.kind for an
extended ptrace event.
* implementing a new RSP 'T' Stop Reply Packet stop reason: "fork", in
gdbserver/remote-utils.c and remote.c.
* implementing new target and RSP support for target_follow_fork with
target extended-remote. (The RSP components were actually defined in
patch 1, but they see their first use here).
- remote target routine remote_follow_fork, which just sends the 'D;pid'
detach packet to detach the new fork child cleanly. We can't just
call target_detach because the data structures for the forked child
have not been allocated on the host side.
Tested on x64 Ubuntu Lucid, native, remote, extended-remote.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Implement return value,
rename argument 'event_child' to 'event_lwp', handle
PTRACE_EVENT_FORK, call internal_error for unrecognized event.
(linux_low_ptrace_options): New function.
(linux_low_filter_event): Call linux_low_ptrace_options,
use different argument fo linux_enable_event_reporting,
use return value from handle_extended_wait.
(extended_event_reported): New function.
(linux_wait_1): Call extended_event_reported and set
status to report fork events.
(linux_write_memory): Add pid to debug message.
(reset_lwp_ptrace_options_callback): New function.
(linux_handle_new_gdb_connection): New function.
(linux_target_ops): Initialize new structure member.
* linux-low.h (struct lwp_info) <waitstatus>: New member.
* lynx-low.c: Initialize new structure member.
* remote-utils.c (prepare_resume_reply): Implement stop reason
"fork" for "T" stop message.
* server.c (handle_query): Call handle_new_gdb_connection.
* server.h (report_fork_events): Declare global flag.
* target.h (struct target_ops) <handle_new_gdb_connection>:
New member.
(target_handle_new_gdb_connection): New macro.
* win32-low.c: Initialize new structure member.
gdb/ChangeLog:
* linux-nat.c (linux_nat_ptrace_options): New function.
(linux_init_ptrace, wait_lwp, linux_nat_filter_event):
Call linux_nat_ptrace_options and use different argument to
linux_enable_event_reporting.
(_initialize_linux_nat): Delete call to
linux_ptrace_set_additional_flags.
* nat/linux-ptrace.c (current_ptrace_options): Rename to
supported_ptrace_options.
(additional_flags): Delete variable.
(linux_check_ptrace_features): Use supported_ptrace_options.
(linux_test_for_tracesysgood, linux_test_for_tracefork):
Likewise, and remove additional_flags check.
(linux_enable_event_reporting): Change 'attached' argument to
'options'. Use supported_ptrace_options.
(ptrace_supports_feature): Change comment. Use
supported_ptrace_options.
(linux_ptrace_set_additional_flags): Delete function.
* nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
Delete function prototype.
* remote.c (remote_fork_event_p): New function.
(remote_detach_pid): New function.
(remote_detach_1): Call remote_detach_pid, don't mourn inferior
if doing detach-on-fork.
(remote_follow_fork): New function.
(remote_parse_stop_reply): Handle new "T" stop reason "fork".
(remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
(init_extended_remote_ops): Initialize to_follow_fork.
|
|
This patch implements gdbserver routines to clone the breakpoint lists of a
process, duplicating them for another process. In gdbserver, each process
maintains its own independent breakpoint list. When a fork call creates a
child, all of the breakpoints currently inserted in the parent process are
also inserted in the child process, but there is nothing to describe them
in the data structures related to the child. The child must have a
breakpoint list describing them so that they can be removed (if detaching)
or recognized (if following). Implementation is a mechanical process of
just cloning the lists in several new functions in gdbserver/mem-break.c.
Tested by building, since none of the new functions are called yet. This
was tested with another patch in the series that implements follow-fork.
gdb/gdbserver/ChangeLog:
* mem-break.c (APPEND_TO_LIST): Define macro.
(clone_agent_expr): New function.
(clone_one_breakpoint): New function.
(clone_all_breakpoints): New function.
* mem-break.h: Declare new functions.
|
|
This patch implements a mechanism for GDB to determine whether fork
events are supported in gdbserver. This is a preparatory patch for
remote fork and exec event support.
Two new RSP packets are defined to represent fork and vfork event
support. These packets are used just like PACKET_multiprocess_feature
to denote whether the corresponding event is supported. GDB sends
fork-events+ and vfork-events+ to gdbserver to inquire about fork
event support. If the response enables these packets, then GDB
knows that gdbserver supports the corresponding events and will
enable them.
Target functions used to query for support are included along with
each new packet.
In order for gdbserver to know whether the events are supported at the
point where the qSupported packet arrives, the code in nat/linux-ptrace.c
had to be reorganized. Previously it would test for fork/exec event
support, then enable the events using the pid of the inferior. When the
qSupported packet arrives there may not be an inferior. So the mechanism
was split into two parts: a function that checks whether the events are
supported, called when gdbserver starts up, and another that enables the
events when the inferior stops for the first time.
Another gdbserver change was to add some global variables similar to
multi_process, one per new packet. These are used to control whether
the corresponding fork events are enabled. If GDB does not inquire
about the event support in the qSupported packet, then gdbserver will
not set these "report the event" flags. If the flags are not set, the
events are ignored like they were in the past. Thus, gdbserver will
never send fork event notification to an older GDB that doesn't
recognize fork events.
Tested on Ubuntu x64, native/remote/extended-remote, and as part of
subsequent patches in the series.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_supports_fork_events): New function.
(linux_supports_vfork_events): New function.
(linux_target_ops): Initialize new structure members.
(initialize_low): Call linux_check_ptrace_features.
* lynx-low.c (lynx_target_ops): Initialize new structure
members.
* server.c (report_fork_events, report_vfork_events):
New global flags.
(handle_query): Add new features to qSupported packet and
response.
(captured_main): Initialize new global variables.
* target.h (struct target_ops) <supports_fork_events>:
New member.
<supports_vfork_events>: New member.
(target_supports_fork_events): New macro.
(target_supports_vfork_events): New macro.
* win32-low.c (win32_target_ops): Initialize new structure
members.
gdb/ChangeLog:
* nat/linux-ptrace.c (linux_check_ptrace_features): Change
from static to extern.
* nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
* remote.c (anonymous enum): <PACKET_fork_event_feature,
* PACKET_vfork_event_feature>: New enumeration constants.
(remote_protocol_features): Add table entries for new packets.
(remote_query_supported): Add new feature queries to qSupported
packet.
(_initialize_remote): Exempt new packets from the requirement
to have 'set remote' commands.
|
|
This commit allows GDB to determine filenames of main executables
when debugging using remote stubs without multiprocess extensions.
The qXfer:exec-file:read packet is extended to allow an empty
annex, with the meaning that the remote stub should supply the
filename of whatever it thinks is the current process.
gdb/ChangeLog:
* remote.c (remote_add_inferior): Call exec_file_locate_attach
for fake PIDs as well as real ones.
(remote_pid_to_exec_file): Send empty annex if PID is fake.
gdb/doc/ChangeLog:
* gdb.texinfo (General Query Packets): Document
qXfer:exec-file:read with empty annex.
gdb/gdbserver/ChangeLog:
* server.c (handle_qxfer_exec_file): Use current process
if annex is empty.
|
|
2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
gdb/gdbserver/
* linux-nios2-low.c: Include elf/common.h. Adjust comments.
Remove HAVE_PTRACE_GETREGS conditionals.
(nios2_regsets): Use PTRACE_GETREGSET and PTRACE_SETREGSET
instead of PTRACE_GETREGS and PTRACE_SETREGS.
|
|
GDBserver steps over breakpoint if the condition is false, but if target
doesn't support hardware single step, the step over is very simple, if
not incorrect, in linux-arm-low.c:
/* We only place breakpoints in empty marker functions, and thread locking
is outside of the function. So rather than importing software single-step,
we can just run until exit. */
static CORE_ADDR
arm_reinsert_addr (void)
{
struct regcache *regcache = get_thread_regcache (current_thread, 1);
unsigned long pc;
collect_register_by_name (regcache, "lr", &pc);
return pc;
}
and linux-mips-low.c does the same. GDBserver sets a breakpoint at the
return address of the current function, resume and wait the program hits
the breakpoint in order to achieve "breakpoint step over". What if
program hits other user breakponits during this "step over"?
It is worse if the arm/thumb interworking is considered. Nowadays,
GDBserver arm backend unconditionally inserts arm breakpoint,
/* Define an ARM-mode breakpoint; we only set breakpoints in the C
library, which is most likely to be ARM. If the kernel supports
clone events, we will never insert a breakpoint, so even a Thumb
C library will work; so will mixing EABI/non-EABI gdbserver and
application. */
(const unsigned char *) &arm_breakpoint,
(const unsigned char *) &arm_eabi_breakpoint,
note that the comments are no longer valid as C library can be compiled
in thumb mode.
When GDBserver steps over a breakpoint in arm mode function, which
returns to thumb mode, GDBserver will insert arm mode breakpoint by
mistake and the program will crash. GDBserver alone is unable to
determine the arm/thumb mode given a PC address. See how GDB does
it in arm-tdep.c:arm_pc_is_thumb.
After thinking about how to teach GDBserver inserting right breakpoint
(arm or thumb) for a while, I reconsider it from a different direction
that it may be unreasonable to run target-side conditional breakpoint for
targets without hardware single step. Pedro also pointed this out here
https://sourceware.org/ml/gdb-patches/2015-04/msg00337.html
This patch is to add a new target_ops hook
supports_conditional_breakpoints, and only reply
";ConditionalBreakpoints+" if it is true. On linux targets,
supports_conditional_breakpoints returns true if target has hardware
single step, on other targets, (win32, lynx, nto, spu), set it to NULL,
because conditional breakpoint is a linux-specific feature.
gdb/gdbserver:
2015-05-08 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_supports_conditional_breakpoints): New
function.
(linux_target_ops): Install new target method.
* lynx-low.c (lynx_target_ops): Install NULL hook for
supports_conditional_breakpoints.
* nto-low.c (nto_target_ops): Likewise.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* server.c (handle_query): Check
target_supports_conditional_breakpoints.
* target.h (struct target_ops) <supports_conditional_breakpoints>:
New field.
(target_supports_conditional_breakpoints): New macro.
|
|
$ ./gdbserver :1234 blah
Process blah created; pid = 16471
Cannot exec blah: No such file or directory.
Child exited with status 127
Killing process(es): 16471
../../../../src/binutils-gdb/gdb/gdbserver/linux-low.c:920: A problem internal to GDBserver has been detected.
kill_wait_lwp: Assertion `res > 0' failed.
GDBserver shouldn't even be trying to kill that process. GDBserver
kills or detaches from all processes on exit, and due to a missing
mourn_inferior call, GDBserver tries to kill the process that it had
already seen exit.
Tested on x86_64 Fedora 20. New test included. I emulated what
Windows outputs by hacking an error call in linux_create_inferior.
gdb/gdbserver/ChangeLog:
2015-05-06 Pedro Alves <palves@redhat.com>
PR server/18081
* server.c (start_inferior): If the process exits, mourn it.
gdb/testsuite/ChangeLog:
2015-05-06 Pedro Alves <palves@redhat.com>
PR server/18081
* gdb.server/non-existing-program.exp: New file.
|
|
This commit introduces a new shared function to replace identical
functions in GDB and gdbserver.
|
|
This fixes lbeg/lend/lcount registers handling through gdbserver.
2015-04-17 Max Filippov <jcmvbkbc@gmail.com>
gdb/gdbserver/
* linux-xtensa-low.c (xtensa_fill_gregset)
(xtensa_store_gregset): Check XCHAL_HAVE_LOOPS instead of
XCHAL_HAVE_LOOP.
|
|
xtensa_usrregs_info refers to undefined variables xtensa_num_regs and
xtensa_regmap. Drop xtensa_usrregs_info and replace pointer to usrregs
in regs_info with NULL since all registers are read/set through regsets.
2015-04-17 Max Filippov <jcmvbkbc@gmail.com>
gdb/gdbserver/
* linux-xtensa-low.c (xtensa_usrregs_info): Remove.
(regs_info): Replace usrregs pointer with NULL.
|
|
This commit implements the "qXfer:exec-file:read" packet in gdbserver.
gdb/gdbserver/ChangeLog:
* target.h (struct target_ops) <pid_to_exec_file>: New field.
* linux-low.c (linux_target_ops): Initialize pid_to_exec_file.
* server.c (handle_qxfer_exec_file): New function.
(qxfer_packets): Add exec-file entry.
(handle_query): Report qXfer:exec-file:read as supported packet.
|
|
Since commit d86d4aafd4fa22fa4cccb83253fb187b03f97f48, the pid
must be retrieved from current_thread.
The change has not been made in the function linux_read_offsets().
Fixes:
http://autobuild.buildroot.net/results/9e4/9e4df085319e346803c26c65478accb27eb950ae/build-end.log
2015-04-14 Romain Naour <romain.naour@openwide.fr> (tiny change)
* linux-low.c (linux_read_offsets): Remove get_thread_lwp.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
|
|
This commit renames common-remote-fileio.[ch] as fileio.[ch]
and renames all functions in these files.
gdb/ChangeLog:
* common/common-remote-fileio.h: Rename to...
* common/fileio.h: ...this. Update all references.
(remote_fileio_to_fio_error): Rename to...
(host_to_fileio_error): ...this.
(remote_fileio_to_be): Rename to...
(host_to_bigendian): ...this. Update all callers.
(remote_fileio_to_fio_uint): Rename to...
(host_to_fileio_uint): ...this. Update all callers.
(remote_fileio_to_fio_time): Rename to...
(host_to_fileio_time): ...this. Update all callers.
(remote_fileio_to_fio_stat): Rename to...
(host_to_fileio_stat): ...this.
Update all references.
* common/common-remote-fileio.c: Rename to...
* common/fileio.c: ...this. Update all references.
(remote_fileio_to_fio_error): Rename to...
(host_to_fileio_error): ...this. Update all callers.
(remote_fileio_mode_to_target): Rename to...
(fileio_mode_pack): ...this. Update all callers.
(remote_fileio_to_fio_mode): Rename to...
(host_to_fileio_mode): ...this. Update all callers.
(remote_fileio_to_fio_ulong): Rename to...
(host_to_fileio_ulong): ...this. Update all callers.
(remote_fileio_to_fio_stat): Rename to...
(host_to_fileio_stat): ...this. Update all callers.
|
|
This commit introduces a new shared function to replace three
identical functions in various places in the codebase.
gdb/ChangeLog:
* common/common-remote-fileio.h (remote_fileio_to_fio_error):
New declaration.
* common/common-remote-fileio.c (remote_fileio_to_fio_error):
New function, factored out the named functions below.
* inf-child.c (gdb/fileio.h): Remove include.
(common-remote-fileio.h): New include.
(inf_child_errno_to_fileio_error): Remove function. Update
all callers to use remote_fileio_to_fio_error.
* remote-fileio.c (remote_fileio_errno_to_target): Likewise.
gdb/gdbserver/ChangeLog:
* hostio-errno.c (errno_to_fileio_error): Remove function.
Update caller to use remote_fileio_to_fio_error.
|
|
Hi,
I see the following error on arm linux gdbserver,
continue^M
Continuing.^M
../../../binutils-gdb/gdb/gdbserver/linux-arm-low.c:458: A problem internal to GDBserver has been detected.^M
raw_bkpt_type_to_arm_hwbp_type: unhandled raw type^M
Remote connection closed^M
(gdb) FAIL: gdb.base/cond-eval-mode.exp: hbreak: continue
After we make GDBserver handling Zx/zx packet idempotent,
[PATCH 3/3] [GDBserver] Make Zx/zx packet handling idempotent.
https://sourceware.org/ml/gdb-patches/2014-04/msg00480.html
> Now removal/insertion of all kinds of breakpoints/watchpoints, either
> internal, or from GDB, always go through the target methods.
GDBserver handles all kinds of breakpoints/watchpoints through target
methods. However, some target backends, such as arm, don't support Z0
packet but need software breakpoint to do breakpoint stepping over in
linux-low.c:start_step_over,
if (can_hardware_single_step ())
{
step = 1;
}
else
{
CORE_ADDR raddr = (*the_low_target.breakpoint_reinsert_addr) ();
set_reinsert_breakpoint (raddr);
step = 0;
}
a software breakpoint is requested to the backend, and the error is
triggered. This problem should affect targets having
breakpoint_reinsert_addr hooked.
Instead of handling memory breakpoint in these affected linux backend,
this patch handles memory breakpoint in linux_{insert,remove}_point,
that, if memory breakpoint is requested, call
{insert,remove}_memory_breakpoint respectively. Then, it becomes
unnecessary to handle memory breakpoint for linux x86 backend, so
this patch removes the code there.
This patch is tested with GDBserver on x86_64-linux and arm-linux
(-marm, -mthumb). Note that there are still some fails in
gdb.base/cond-eval-mode.exp with -mthumb, because GDBserver doesn't
know how to select the correct breakpoint instruction according to
the arm-or-thumb-mode of requested address. This is a separate
issue, anyway.
gdb/gdbserver:
2015-04-09 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_insert_point): Call
insert_memory_breakpoint if TYPE is raw_bkpt_type_sw.
(linux_remove_point): Call remove_memory_breakpoint if type is
raw_bkpt_type_sw.
* linux-x86-low.c (x86_insert_point): Don't call
insert_memory_breakpoint.
(x86_remove_point): Don't call remove_memory_breakpoint.
|
|
--attach/--multi are currently only mentioned on the usage info first
lines, the meaning of PROG is completely absent and the COMM text does
not mention '-/stdio'.
A few options are missing:
. --disable-randomization / --no-disable-randomization is not mentioned.
Although the manual has a comment saying these are superceded by
QDisableRandomization, that only makes sense for "run" in
extended-remote mode. When we start gdbserver passing it a PROG,
--disable-randomization / --no-disable-randomization do take effect.
So I think we should document these.
. We show --debug / --remote-debug, so might as well show --disable-packet too.
GDB's --help has this "For more information, consult the GDB manual"
blurb that is missing in GDBserver's --help.
Then shuffle things around a bit into "Operating modes", "Other
options" and "Debug options" sections, similarly to GDB's --help
structure.
Before:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ ./gdbserver/gdbserver --help
Usage: gdbserver [OPTIONS] COMM PROG [ARGS ...]
gdbserver [OPTIONS] --attach COMM PID
gdbserver [OPTIONS] --multi COMM
COMM may either be a tty device (for serial debugging), or
HOST:PORT to listen for a TCP connection.
Options:
--debug Enable general debugging output.
--debug-format=opt1[,opt2,...]
Specify extra content in debugging output.
Options:
all
none
timestamp
--remote-debug Enable remote protocol debugging output.
--version Display version information and exit.
--wrapper WRAPPER -- Run WRAPPER to start new programs.
--once Exit after the first connection has closed.
Report bugs to "<http://www.gnu.org/software/gdb/bugs/>".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ ./gdbserver/gdbserver --help
Usage: gdbserver [OPTIONS] COMM PROG [ARGS ...]
gdbserver [OPTIONS] --attach COMM PID
gdbserver [OPTIONS] --multi COMM
COMM may either be a tty device (for serial debugging),
HOST:PORT to listen for a TCP connection, or '-' or 'stdio' to use
stdin/stdout of gdbserver.
PROG is the executable program. ARGS are arguments passed to inferior.
PID is the process ID to attach to, when --attach is specified.
Operating modes:
--attach Attach to running process PID.
--multi Start server without a specific program, and
only quit when explicitly commanded.
--once Exit after the first connection has closed.
--help Print this message and then exit.
--version Display version information and exit.
Other options:
--wrapper WRAPPER -- Run WRAPPER to start new programs.
--disable-randomization
Run PROG with address space randomization disabled.
--no-disable-randomization
Don't disable address space randomization when
starting PROG.
Debug options:
--debug Enable general debugging output.
--debug-format=opt1[,opt2,...]
Specify extra content in debugging output.
Options:
all
none
timestamp
--remote-debug Enable remote protocol debugging output.
--disable-packet=opt1[,opt2,...]
Disable support for RSP packets or features.
Options:
vCont, Tthread, qC, qfThreadInfo and
threads (disable all threading packets).
For more information, consult the GDB manual (available as on-line
info or a printed manual).
Report bugs to "<http://www.gnu.org/software/gdb/bugs/>".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gdb/gdbserver/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
Cleber Rosa <crosa@redhat.com>
* server.c (gdbserver_usage): Reorganize and extend the usage
message.
|
|
This adds/tweaks a few debug logs I found useful recently.
gdb/gdbserver/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* linux-low.c (check_stopped_by_breakpoint): Tweak debug log
output. Also dump TRAP_TRACE.
(linux_low_filter_event): In debug output, distinguish a
resume_stop SIGSTOP from a delayed SIGSTOP.
gdb/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_nat_resume): Output debug logs before trying
to resume the event lwp. Use the lwp's ptid instead of the passed
in (maybe wildcard) ptid.
(stop_wait_callback): Tweak debug log output.
(check_stopped_by_breakpoint): Tweak debug log output. Also dump
TRAP_TRACE.
(linux_nat_filter_event): In debug output, distinguish a
resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
before trying to resume the lwp.
|
