aboutsummaryrefslogtreecommitdiff
path: root/gdb/gdbserver
AgeCommit message (Collapse)AuthorFilesLines
2014-02-20Add single sentence description to top of entry of previous commit.Doug Evans1-0/+1
2014-02-20Remove all_lwps global.Doug Evans11-292/+459
* inferiors.h (ptid_of): Move here from linux-low.h. (pid_of, lwpid_of): Ditto. * linux-aarch64-low.c (debug_reg_change_callback): Update, "entry" parameter is a struct thread_info * now. (aarch64_notify_debug_reg_change): Fetch pid from current_inferior directly. Pass &all_threads to find_inferior instead of &all_lwps. (aarch64_stopped_data_address): Fetch lwpid from current_inferior directly. (aarch64_linux_prepare_to_resume): Fetch ptid from thread. (aarch64_arch_setup): Fetch lwpid from current_inferior directly. * linux-arm-low.c (update_registers_callback): Update, "entry" parameter is a struct thread_info * now. Fetch lwpid from current_inferior directly. (arm_insert_point): Pass &all_threads to find_inferior instead of &all_lwps. (arm_remove_point): Ditto. (arm_stopped_by_watchpoint): Fetch lwp from current_inferior. (arm_prepare_to_resume): Fetch pid from thread. (arm_read_description): Fetch lwpid from current_inferior directly. * linux-low.c (all_lwps): Delete. (delete_lwp): Delete call to remove_inferior. (handle_extended_wait): Fetch lwpid from thread. (add_lwp): Don't set lwp->entry.id. Remove call to add_inferior_to_list. (linux_attach_lwp_1): Fetch pid from current_inferior directly. (linux_kill_one_lwp): Fetch ptid,lwpid from thread. (kill_one_lwp_callback): Ditto. (linux_kill): Don't dereference NULL pointer. Fetch ptid,lwpid from thread. (get_detach_signal): Fetch ptid from thread. (linux_detach_one_lwp): Fetch ptid,lwpid from thread. Simplify call to regcache_invalidate_thread. (delete_lwp_callback): Update, "entry" parameter is a struct thread_info * now. Fetch pid from thread. (linux_mourn): Pass &all_threads to find_inferior instead of &all_lwps. (status_pending_p_callback): Update, "entry" parameter is a struct thread_info * now. Fetch ptid from thread. (find_lwp_pid): Update, "entry" parameter is a struct thread_info * now. (linux_wait_for_lwp): Fetch pid from thread. (linux_fast_tracepoint_collecting): Fetch lwpid from thread. (maybe_move_out_of_jump_pad): Fetch lwpid from current_inferior. (enqueue_one_deferred_signal): Fetch lwpid from thread. (dequeue_one_deferred_signal): Ditto. (cancel_breakpoint): Fetch ptid from current_inferior. (linux_wait_for_event): Pass &all_threads to find_inferior, not &all_lwps. Fetch ptid, lwpid from thread. (count_events_callback): Update, "entry" parameter is a struct thread_info * now. (select_singlestep_lwp_callback): Ditto. (select_event_lwp_callback): Ditto. (cancel_breakpoints_callback): Ditto. (linux_cancel_breakpoints): Pass &all_threads to find_inferior, not &all_lwps. (select_event_lwp): Ditto. Fetch ptid from event_thread. (unsuspend_one_lwp): Update, "entry" parameter is a struct thread_info * now. (unsuspend_all_lwps): Pass &all_threads to find_inferior, not &all_lwps. (linux_stabilize_threads): Ditto. And for for_each_inferior. Fetch lwpid from thread, not lwp. (linux_wait_1): Fetch ptid, lwpid from current_inferior. Pass &all_threads to find_inferior, not &all_lwps. (send_sigstop): Fetch lwpid from thread, not lwp. (send_sigstop_callback): Update, "entry" parameter is a struct thread_info * now. (suspend_and_send_sigstop_callback): Ditto. (wait_for_sigstop): Ditto. Fetch ptid, lwpid from thread, lwp. (stuck_in_jump_pad_callback): Update, "entry" parameter is a struct thread_info * now. (move_out_of_jump_pad_callback): Ditto. Fetch ptid, lwpid from thread, lwp. (lwp_running): Update, "entry" parameter is a struct thread_info * now. (stop_all_lwps): Fetch ptid from thread. Pass &all_threads to find_inferior, for_each_inferior, not &all_lwps. (linux_resume_one_lwp): Fetch lwpid from thread. (linux_set_resume_request): Update, "entry" parameter is a struct thread_info * now. Fetch pid, lwpid from thread. (resume_status_pending_p): Update, "entry" parameter is a struct thread_info * now. (need_step_over_p): Ditto. Fetch lwpid from thread. (start_step_over): Fetch lwpid from thread. (linux_resume_one_thread): Update, "entry" parameter is a struct thread_info * now. Fetch lwpid from thread. (linux_resume): Pass &all_threads to find_inferior, not &all_lwps. (proceed_one_lwp): Update, "entry" parameter is a struct thread_info * now. Fetch lwpid from thread. (unsuspend_and_proceed_one_lwp): Update, "entry" parameter is a struct thread_info * now. (proceed_all_lwps): Pass &all_threads to find_inferior, not &all_lwps. (unstop_all_lwps): Ditto. Fetch lwpid from thread. (regsets_fetch_inferior_registers): Fetch lwpid from current_inferior directly. (regsets_store_inferior_registers): Ditto. (fetch_register, store_register): Ditto. (linux_read_memory, linux_write_memory): Ditto. (linux_request_interrupt): Ditto. (linux_read_auxv): Ditto. (linux_xfer_siginfo): Ditto. (linux_qxfer_spu): Ditto. (linux_qxfer_libraries_svr4): Ditto. * linux-low.h (ptid_of, pid_of, lwpid_of): Delete, moved to inferiors.h. (get_lwp): Delete. (get_thread_lwp): Update. (struct lwp_info): Delete member "entry". Simplify comment for member "thread". (all_lwps): Delete. * linux-mips-low.c (mips_read_description): Fetch lwpid from current_inferior directly. (update_watch_registers_callback): Update, "entry" parameter is a struct thread_info * now. Fetch pid from thread. (mips_linux_prepare_to_resume): Fetch ptid from thread. (mips_insert_point): Fetch lwpid from current_inferior. Pass &all_threads to find_inferior, not &all_lwps. (mips_remove_point): Pass &all_threads to find_inferior, not &all_lwps. (mips_stopped_by_watchpoint): Fetch lwpid from current_inferior directly. (mips_stopped_data_address): Ditto. * linux-s390-low.c (s390_arch_setup): Fetch pid from current_inferior directly. * linux-tile-low.c (tile_arch_setup): Ditto. * linux-x86-low.c (x86_get_thread_area): Fetch lwpid from thread. (update_debug_registers_callback): Update, "entry" parameter is a struct thread_info * now. Fetch pid from thread. (i386_dr_low_set_addr): Fetch pid from current_inferior directly. Pass &all_threads to find_inferior, not &all_lwps. (i386_dr_low_get_addr): Fetch ptid from current_inferior directly. (i386_dr_low_set_control): Fetch pid from current_inferior directly. Pass &all_threads to find_inferior, not &all_lwps. (i386_dr_low_get_control): Fetch ptid from current_inferior directly. (i386_dr_low_get_status): Ditto. (x86_linux_prepare_to_resume): Fetch ptid from thread. (x86_siginfo_fixup): Fetch lwpid from current_inferior directly. (x86_linux_read_description): Ditto. * proc-service.c (ps_getpid): Fetch pid from current_inferior directly.
2014-02-20* inferiors.c (get_first_inferior): Fix buglet.Doug Evans2-2/+6
2014-02-19Add backlink from lwp_info to thread_info.Doug Evans5-8/+21
* gdbthread.h (add_thread): Change result type to struct thread_info *. * inferiors.c (add_thread): Change result type to struct thread_info *. All callers updated. (add_lwp): Call add_thread here instead of in callers. All callers updated. * linux-low.h (get_lwp_thread): Rewrite. (struct lwp_info): New member "thread". This speeds up gdbserver attach in non-stop mode because now get_lwp_thread doesn't do a linear search for the corresponding thread_info object.
2014-02-19 * linux-low.c (add_lwp): Change result to struct lwp_info *.Doug Evans2-4/+9
All callers updated.
2014-02-19* inferiors.c (add_thread): Fix whitespace.Doug Evans2-1/+5
2014-02-19Replace code accessing list implementation details with API calls.Doug Evans10-108/+278
* dll.c (clear_dlls): Replace accessing list implemention details with API function. * gdbthread.h (get_first_thread): Declare. * inferiors.c (for_each_inferior_with_data): New function. (get_first_thread): New function. (find_thread_ptid): Simplify. (get_first_inferior): New function. (clear_list): Delete. (one_inferior_p): New function. (clear_inferior_list): New function. (clear_inferiors): Update. * inferiors.h (for_each_inferior_with_data): Declare. (clear_inferior_list): Declare. (one_inferior_p): Declare. (get_first_inferior): Declare. * linux-low.c (linux_wait_for_event): Replace accessing list implemention details with API function. * server.c (target_running): Ditto. (accumulate_file_name_length): New function. (emit_dll_description): New function. (handle_qxfer_libraries): Replace accessing list implemention details with API function. (handle_qxfer_threads_worker): New function. (handle_qxfer_threads_proper): Replace accessing list implemention details with API function. (handle_query): Ditto. (visit_actioned_threads_callback_ftype): New typedef. (visit_actioned_threads_data): New struct. (visit_actioned_threads): Rewrite to be find_inferior callback. (resume): Call find_inferior. (handle_status): Replace accessing list implemention details with API function. (process_serial_event): Replace accessing list implemention details with API function. * target.c (set_desired_inferior): Replace accessing list implemention details with API function. * tracepoint.c (same_process_p): New function. (gdb_agent_about_to_close): Replace accessing list implemention details with API function. * win32-low.c (child_delete_thread): Replace accessing list implemention details with API function. (match_dll_by_basename): New function. (dll_is_loaded_by_basename): New function. (win32_ensure_ntdll_loaded): Replace accessing list implemention details call to dll_is_loaded_by_basename.
2014-02-19Rename inferior_list_entry uses from "head" to "entry" for consistency.Doug Evans11-29/+65
* dll.h (struct dll_info): Add comment. * gdbthread.h (struct thread_info): Add comment. (current_ptid): Simplify. * inferiors.c (add_process): Update. (remove_process): Update. * inferiors.h (struct process_info): Rename member "head" to "entry". * linux-low.c (delete_lwp): Update. (add_lwp): Update. (last_thread_of_process_p): Update. (kill_one_lwp_callback, linux_kill): Update. (status_pending_p_callback): Update. (wait_for_sigstop): Update. Simplify read of ptid. (start_step_over): Update. * linux-low.h (ptid_of, pid_of, lwpid_of): Update. (get_lwp_thread): Update. (struct lwp_info): Rename member "head" to "entry". * regcache.h (inferior_list_entry): Delete. * server.c (kill_inferior_callback): Update. (detach_or_kill_inferior_callback): Update. (print_started_pid): Update. (print_attached_pid): Update. (process_serial_event): Simplify read of ptid. * thread-db.c (thread_db_create_event): Update. (thread_db_get_tls_address): Update. * win32-low.c (current_inferior_ptid): Simplify.
2014-02-19convert to_supports_btraceTom Tromey2-3/+10
This adds a "self" argument to to_supports_btrace. Due to how one implementation of this method is shared with gdbserver this required a small change to gdbserver as well. 2014-02-19 Tom Tromey <tromey@redhat.com> * common/linux-btrace.c (linux_supports_btrace): Add "ops" argument. * common/linux-btrace.h (linux_supports_btrace): Update. * remote.c (remote_supports_btrace): Add "self" argument. * target-delegates.c: Rebuild. * target.c (target_supports_btrace): Remove. * target.h (struct target_ops) <to_supports_btrace>: Add target_ops argument. (target_supports_btrace): New define. 2014-02-19 Tom Tromey <tromey@redhat.com> * target.h (struct target_ops) <supports_btrace>: Add target_ops argument. (target_supports_btrace): Update.
2014-02-14Compile rsp-low.c for IPAYao Qi2-1/+9
gdb/gdbserver: 2014-02-14 Yao Qi <yao@codesourcery.com> * Makefile.in (IPA_OBJS): Append rsp-low-ipa.o. (rsp-low-ipa.o): New target.
2014-02-12replace convert_ascii_to_int with hex2binTom Tromey5-5/+13
convert_ascii_to_int is identical to hex2bin. This removes the former. 2014-02-12 Tom Tromey <tromey@redhat.com> * common/rsp-low.c (convert_ascii_to_int): Remove. * common/rsp-low.h (convert_ascii_to_int): Don't declare. 2014-02-12 Tom Tromey <tromey@redhat.com> * ax.c (gdb_parse_agent_expr): Use hex2bin, not convert_ascii_to_int. * regcache.c (registers_to_string): Likewise. * remote-utils.c (decode_M_packet): Likewise. * server.c (process_serial_event): Likewise.
2014-02-12replace unhexify with hex2binTom Tromey3-7/+14
unhexify and hex2bin are identical, so this removes unhexify. The particular choice of which to keep was made on the basis of parallelism with the earlier patch that removed hexify. 2014-02-12 Tom Tromey <tromey@redhat.com> * common/rsp-low.h (unhexify): Don't declare. * common/rsp-low.c (unhexify): Remove. 2014-02-12 Tom Tromey <tromey@redhat.com> * server.c (handle_query, handle_v_run): Use hex2bin, not unhexify. * tracepoint.c (cmd_qtdpsrc, cmd_qtdv, cmd_qtnotes): Likewise.
2014-02-12replace convert_int_to_ascii with bin2hexTom Tromey6-13/+24
convert_int_to_ascii is identical to bin2hex. This removes the former. In this case I made the choice of which to keep on the basis that I consider the name bin2hex to be superior to convert_int_to_ascii. 2014-02-12 Tom Tromey <tromey@redhat.com> * common/rsp-low.h (convert_int_to_ascii): Don't declare. * common/rsp-low.c (convert_int_to_ascii): Remove. 2014-02-12 Tom Tromey <tromey@redhat.com> * ax.c (gdb_unparse_agent_expr): Use bin2hex, not convert_int_to_ascii. * regcache.c (registers_to_string, collect_register_as_string): Likewise. * remote-utils.c (look_up_one_symbol, relocate_instruction): Likewise. * server.c (process_serial_event): Likewise. * tracepoint.c (cmd_qtstatus, response_source, response_tsv) (cmd_qtbuffer, cstr_to_hexstr): Likewise.
2014-02-12replace hexify with bin2hexTom Tromey3-5/+12
This removes hexify in favor of bin2hex. The choice of which to keep was arbitrary. 2014-02-12 Tom Tromey <tromey@redhat.com> * common/rsp-low.h (hexify): Don't declare. * common/rsp-low.c (hexify): Remove. 2014-02-12 Tom Tromey <tromey@redhat.com> * remote-utils.c (look_up_one_symbol, monitor_output): Use bin2hex, not hexify. * tracepoint.c (cmd_qtstatus): Likewise.
2014-02-12don't let hexify call strlenTom Tromey2-2/+8
hexify had the same issue as bin2hex; and the fix is the same. 2014-02-12 Tom Tromey <tromey@redhat.com> * common/rsp-low.c (hexify): Never take strlen of argument. 2014-02-12 Tom Tromey <tromey@redhat.com> * remote-utils.c (monitor_output): Pass explicit length to hexify.
2014-02-12move some rsp bits into rsp-low.hTom Tromey8-222/+29
This moves various low-level remote serial protocol bits into common/rsp-low.[ch]. This is as close to a pure move as possible. There are some redundancies remaining but those will be dealt with in a subsequent patch. Note that the two variants of remote_escape_output disagreed on the treatment of "*". On the theory that quoting cannot hurt but the absence possibly can, I chose the gdbserver variant to be the canonical one. 2014-02-12 Tom Tromey <tromey@redhat.com> * tracepoint.c: Include rsp-low.h. * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare. * remote.c: Include rsp-low.h. (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte) (fromhex, hex2bin, tohex, bin2hex, remote_escape_output) (remote_unescape_input): Move to common/rsp-low.c. * common/rsp-low.h: New file. * common/rsp-low.c: New file. * Makefile.in (SFILES): Add common/rsp-low.c. (HFILES_NO_SRCDIR): Add common/rsp-low.h. (COMMON_OBS): Add rsp-low.o. (rsp-low.o): New target. 2014-02-12 Tom Tromey <tromey@redhat.com> * tracepoint.c: Include rsp-low.h. * server.c: Include rsp-low.h. * remote-utils.h (convert_ascii_to_int, convert_int_to_ascii) (unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't declare. * remote-utils.c: Include rsp-low.h. (fromhex, hexchars, ishex, unhexify, tohex, hexify) (remote_escape_output, remote_unescape_input, unpack_varlen_hex) (convert_int_to_ascii, convert_ascii_to_int): Move to common/rsp-low.c. * regcache.c: Include rsp-low.h. * ax.c: Include rsp-low.h. * Makefile.in (SFILES): Add common/rsp-low.c. (OBS): Add rsp-low.o. (rsp-low.o): New target.
2014-02-12share "cell" codeTom Tromey4-123/+23
The "cell"-based printing code, like phex, was duplicated in both gdb and gdbserver. This patch merges the two implementations into a new file in common/. 2014-02-12 Tom Tromey <tromey@redhat.com> * utils.h: Include print-utils.h. (host_address_to_string, plongest, pulongest, phex, phex_nz) (int_string, core_addr_to_string, core_addr_to_string_nz) (hex_string, hex_string_custom): Don't declare. * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest) (plongest, thirty_two, phex, phex_nz, octal2str, hex_string) (hex_string_custom, int_string, core_addr_to_string) (core_addr_to_string_nz, host_address_to_string): Move to common/print-utils.c. * common/print-utils.h: New file. * common/print-utils.c: New file * Makefile.in (SFILES): Add common/print-utils.c. (HFILES_NO_SRCDIR): Add common/print-utils.h. (COMMON_OBS): Add print-utils.o. (print-utils.o): New target. 2014-02-12 Tom Tromey <tromey@redhat.com> * utils.h (pulongest, plongest, phex_nz): Don't declare. Include print-utils.h. * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest) (plongest, thirty_two, phex_nz): Remove. * Makefile.in (SFILES): Add common/print-utils.c. (OBS): Add print-utils.o. (print-utils-ipa.o): New target. (print-utils.o): New target. (IPA_OBJS): Add print-utils-ipa.o.
2014-02-06indentation fixlet in gdbserver/Makefile.in.Tom Tromey2-1/+5
This fixes a minor indentation issue in gdbserver/Makefile.in. 2014-02-06 Tom Tromey <tromey@redhat.com> * Makefile.in (SFILES): Fix indentation.
2014-02-05Keep current_inferior in sync with event_child.Doug Evans2-1/+9
* linux-low.c (linux_wait_for_event): Improve comment. (linux_wait_1): Keep current_inferior in sync with event_child.
2014-01-22 * gdbthread.h (gdb_id_to_thread): Delete, unused.Doug Evans2-1/+5
2014-01-22 New gdbserver option --debug-format=timestamp.Doug Evans21-381/+727
* NEWS: Mention it. gdbserver/ * configure.ac (AC_CHECK_FUNCS): Add test for gettimeofday. * configure: Regenerate. * config.in: Regenerate. * Makefile.in (SFILES): Add debug.c. (OBS): Add debug.o. * debug.c: New file. * debug.h: New file. * linux-aarch64-low.c (*): Update all debugging printfs to use debug_printf instead of fprintf. * linux-arm-low.c (*): Ditto. * linux-cris-low.c (*): Ditto. * linux-crisv32-low.c (*): Ditto. * linux-m32r-low.c (*): Ditto. * linux-sparc-low.c (*): Ditto. * linux-x86.c (*): Ditto. * linux-low.c (*): Ditto. (linux_wait_1): Add calls to debug_enter, debug_exit. (linux_wait): Remove redundant debugging printf. (stop_all_lwps): Add calls to debug_enter, debug_exit. (linux_resume, unstop_all_lwps): Ditto. * mem-break.c (*): Update all debugging printfs to use debug_printf instead of fprintf. * remote-utils.c (*): Ditto. * thread-db.c (*): Ditto. * server.c #include <ctype.h>, "gdb_vecs.h". (debug_threads): Moved to debug.c. (*): Update all debugging printfs to use debug_printf instead of fprintf. (start_inferior): Replace call to fflush with call to debug_flush. (monitor_show_help): Mention set debug-format. (parse_debug_format_options): New function. (handle_monitor_command): Handle "monitor set debug-format". (gdbserver_usage): Mention --debug-format. (main): Parse --debug-format. * server.h (debug_threads): Declaration moved to debug.h. #include "debug.h". * tracepoint.c (trace_debug_1) [!IN_PROCESS_AGENT]: Add version of trace_debug_1 that uses debug_printf. (tracepoint_look_up_symbols): Update all debugging printfs to use debug_printf instead of fprintf. doc/ * gdb.texinfo (Server): Mention --debug-format=all|none|timestamp. (gdbserver man): Ditto. testsuite/ * gdb.server/server-mon.exp: Add tests for "set debug-format".
2014-01-20gdb: xtensa: fix linux ptrace includesBaruch Siach2-1/+6
Currently, xtensa code using the Linux ptrace interface only include sys/ptrace.h. This file comes from the C library (glibc and uClibc, at least), and includes a declaration of the ptrace() functions, along with some cross architecture constants that are mostly copied from the file located at include/uapi/linux/ptrace.h in recent Linux kernels. For xtensa specific constants like PTRACE_GETXTREGS and PTRACE_SETXTREGS the asm/ptrace.h include from the Linux kernel UAPI is needed. The code in gdbserver xtensa specific part doesn't call ptrace() directly, so we can remove the unneeded sys/ptrace.h include. The gdb xtensa specific code needs both headers, since it calls ptrace(). gdb/ * xtensa-linux-nat.c: Include asm/ptrace.h. gdb/gdbserver/ * linux-xtensa-low.c: Include asm/ptrace.h instead of sys/ptrace.h.
2014-01-17Fix PR mention in gdb/gdbserver/ChangeLog's previous change.Pedro Alves1-1/+1
2014-01-17Fix silly ChangeLog entry in previous change.Pedro Alves1-2/+2
2014-01-17Fix PR PR16445 - gdbserver build failure on x86.Pedro Alves2-1/+12
If gdb_proc_service.h ends up including linux/elf.h, we'll trip on duplicate definitions: In file included from ../../../gdb/gdbserver/linux-x86-low.c:29:0: ../../../gdb/gdbserver/../../include/elf/common.h:36:0: error: "ELFMAG0" redefined [-Werror] ... etc ... Handle this the same way linux-low.c and linux-arm-low.c handle this. gdb/gdbserver/ 2014-01-17 Pedro Alves <palves@redhat.com> PR PR16445 * linux-x86-low.c (linux-x86-low.c): Don't include elf/common.h if ELFMAG0 is defined after including gdb_proc_service.h.
2014-01-16 * dll.c (UNSPECIFIED_CORE_ADDR): New macro.Doug Evans2-1/+9
(match_dll): Use it.
2014-01-16btrace, gdbserver: read branch trace incrementallyMarkus Metzger4-11/+55
Read branch trace data incrementally and extend the current trace rather than discarding it and reading the entire trace buffer each time. If the branch trace buffer overflowed, we can't extend the current trace so we discard it and start anew by reading the entire branch trace buffer. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace): Support delta reads. (linux_disable_btrace): Change return type. * common/linux-btrace.h (linux_read_btrace): Change parameters and return type to allow error reporting. Update users. (linux_disable_btrace): Change return type. Update users. * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>: New. (btrace_error): New. (btrace_block) <begin>: Comment on BEGIN == 0. * btrace.c (btrace_compute_ftrace): Start from the end of the current trace. (btrace_stitch_trace, btrace_clear_history): New. (btrace_fetch): Read delta trace, return if replaying. (btrace_clear): Move clear history code to btrace_clear_history. (parse_xml_btrace): Throw an error if parsing failed. * target.h (struct target_ops) <to_read_btrace>: Change parameters and return type to allow error reporting. (target_read_btrace): Change parameters and return type to allow error reporting. * target.c (target_read_btrace): Update. * remote.c (remote_read_btrace): Support delta reads. Pass errors on. * NEWS: Announce it. gdbserver/ * target.h (target_ops) <read_btrace>: Change parameters and return type to allow error reporting. * server.c (handle_qxfer_btrace): Support delta reads. Pass trace reading errors on. * linux-low.c (linux_low_read_btrace): Pass trace reading errors on. (linux_low_disable_btrace): New.
2014-01-16btrace: uppercase btrace_read_typeMarkus Metzger1-2/+2
2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * common/btrace-common.h (btrace_read_type) <btrace_read_all>: Change to ... (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users. (btrace_read_type) <btrace_read_new>: Change to ... (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
2014-01-15delete thread_id_to_gdb_id, unusedDoug Evans3-16/+5
* inferiors.c (thread_id_to_gdb_id): Delete. * inferiors.h (thread_id_to_gdb_id): Delete.
2014-01-13Fix MinGW compilation errors in gdbserver/.Eli Zaretskii2-1/+7
gdb/gdbserver/Makefile.in (INCLUDE_CFLAGS): Remove trailing slash from "-I$(srcdir)/../". Fixes MinGW compilation errors with old GCC versions.
2014-01-08GDBserver: Discard previous queued events when GDB disconnects.Pedro Alves2-3/+12
... not when a new GDB connection sends the status packet ('?'). Mainly just a cleanup/simplification, as GDB always sends '?' first. Tested on x86_64 Fedora 17. 2014-01-08 Pedro Alves <palves@redhat.com> * server.c (handle_status): Don't discard previous queued stop replies or thread's pending status here. (main) <disconnection>: Do it here instead.
2014-01-08[remote/gdbserver] Don't lose signals when reconnecting.Pedro Alves3-42/+191
Currently, when GDB connects in all-stop mode, GDBserver always responds to the status packet with a GDB_SIGNAL_TRAP, even if the program is actually stopped for some other signal. (gdb) tar rem ... ... (gdb) c Program received signal SIGUSR1, User defined signal 1. (gdb) disconnect (gdb) tar rem ... (gdb) c (Or a GDB crash instead of an explicit disconnect.) This results in the program losing that signal on that last continue, because gdb will tell the target to resume with no signal (to suppress the GDB_SIGNAL_TRAP, due to 'handle SISGTRAP nopass'), and that will actually suppress the real signal the program had stopped for (SIGUSR1). To fix that, I think we should make GDBserver report the real signal the thread had stopped for in response to the status packet: @item ? @cindex @samp{?} packet Indicate the reason the target halted. The reply is the same as for step and continue. But, that raises the question -- which thread are we reporting the status for? Due to how the RSP in all-stop works, we can only report one status. The status packet's response is a stop reply packet, so it includes the thread identifier, so it's not a problem packet-wise. However, GDBserver is currently always reporting the status for first thread in the thread list, even though that may well not be the thread that got the signal that caused the program to stop. So the next logical step would be to report the status for the last_ptid/last_status thread (the last event reported to gdb), if it's still around; and if not, fallback to some other thread. There's an issue on the GDB side with that, though... GDB currently always adds the thread reported in response to the status query as the first thread in its list. That means that if we start with e.g., (gdb) info threads 3 Thread 1003 ... * 2 Thread 1002 ... 1 Thread 1001 ... And reconnect: (gdb) disconnect (gdb) tar rem ... We end up with: (gdb) info threads 3 Thread 1003 ... 2 Thread 1001 ... * 1 Thread 1002 ... Not a real big issue, but it's reasonably fixable, by having GDB fetch/sync the thread list before fetching the status/'?', and then using the status to select the right thread as current on the GDB side. Holes in the thread numbers are squashed before/after reconnection (e.g., 2,3,5 becomes 1,2,3), but the order is preserved, which I think is both good, and good enough. However (yes, there's more...), the previous GDB that was connected might have had gdbserver running in non-stop mode, or could have left gdbserver doing disconnected tracing (which also forces non-stop), and if the new gdb/connection is in all-stop mode, we can end up with more than one thread with a signal to report back to gdb. As we can only report one thread/status (in the all-stop RSP variant; the non-stop variant doesn't have this issue), we get to do what we do at every other place we have this situation -- leave events we can't report right now as pending, so that the next resume picks them up. Note all this ammounts to a QoI change, within the existing framework. There's really no RSP change here. The only user visible change (other than that the signal is program is stopped at isn't lost / is passed to the program), is in "info program", that now can show the signal the program stopped for. Of course, the next resume will respect the pass/nopass setting for the signal in question. It'd be reasonable to have the initial connection tell the user the program was stopped with a signal, similar to when we load a core to debug, but I'm leaving that out for a future change. I think we'll need to either change how handle_inferior_event & co handle stop_soon, or maybe bypass them completely (like fork-child.c:startup_inferior) for that. Tested on x86_64 Fedora 17. gdb/gdbserver/ 2014-01-08 Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_info) <status_pending_p>: New field. * server.c (visit_actioned_threads, handle_pending_status): New function. (handle_v_cont): Factor out parts to ... (resume): ... this new function. If in all-stop, and a thread being resumed has a pending status, report it without actually resuming. (myresume): Adjust to use the new 'resume' function. (clear_pending_status_callback, set_pending_status_callback) (find_status_pending_thread_callback): New functions. (handle_status): Handle the case of multiple threads having interesting statuses to report. Report threads' real last signal instead of always reporting GDB_SIGNAL_TRAP. Look for a thread with an interesting thread to report the status for, instead of always reporting the status of the first thread. gdb/ 2014-01-08 Pedro Alves <palves@redhat.com> * remote.c (remote_add_thread): Add threads silently if starting up. (remote_notice_new_inferior): If in all-stop, and starting up, don't call notice_new_inferior. (get_current_thread): New function, factored out from ... (add_current_inferior_and_thread): ... this. Adjust. (remote_start_remote) <all-stop>: Fetch the thread list. If we found any thread, then select the remote's current thread as GDB's current thread too. gdb/testsuite/ 2014-01-08 Pedro Alves <palves@redhat.com> * gdb.threads/reconnect-signal.c: New file. * gdb.threads/reconnect-signal.exp: New file.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker79-79/+79
2014-01-01Update copyright year in gdb/gdbserver/gdbreplay version output.Joel Brobecker3-2/+7
gdb/ChangeLog: * top.c (print_gdb_version): Set copyright year to 2014. gdb/gdbserver/ChangeLog: * gdbserver.c (gdbserver_version): Set copyright year to 2014. * gdbreplay.c (gdbreplay_version): Likewise.
2013-12-18gdb/Yufeng Zhang2-1/+9
* aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Set iov.iov_len with the real length in use. gdb/gdbserver/ * linux-aarch64-low.c (aarch64_linux_set_debug_regs): Set iov.iov_len with the real length in use.
2013-12-13nameless LOAD_DLL_DEBUG_EVENT causes ntdll.dll to be missingJoel Brobecker4-0/+107
This is the gdbserver-equivalent of the change made in GDB to handle the case, in x64 windows version 2012, where the kernel produces a LOAD_DLL_DEBUG_EVENT where the name of the associated DLL cannot be determined at that time, and thus has to be processed later. The visible symptom is that ntdll.dll is missing from the list of shared libraries known to be mapped by the inferior, with other side-effects such as failure to unwind through code provided by that DLL (such as exception handling routines). gdb/gdbserver/ChangeLog: * Makefile.in (safe-ctype.o, lbasename.o): New rules. * configure.srv: Add safe-ctype.o and lbasename.o to srv_tgtobj for all targets that use win32-low.c. * win32-low.c (win32_ensure_ntdll_loaded): New function. (do_initial_child_stuff): Add call to win32_ensure_ntdll_loaded.
2013-12-13Do the target-waiting within do_initial_child_stuff on Windows.Pedro Alves3-15/+66
This is a preparatory patch that achieves two goals: . Makes the initial event handling more similar to GDB's; . Opens the door for implementing post-inititial-handling operations. At the moment, this is only done on Windows, where the post-initial-handling is going to be needed (in the context of Windows 2012). And because we're close to creating the gdb 7.7 branch, making that change for all platforms is a little more risk that we'd like. So the change is currently implemented on Windows. gdb/gdbserver/ChangeLog: * target.c (mywait): Set OURSTATUS->KIND to TARGET_WAITKIND_STOPPED if equal to TARGET_WAITKIND_LOADED. * win32-low.c (cached_status): New static global. (win32_wait): Add declaration. (do_initial_child_stuff): Flush all initial pending debug events up to the initial breakpoint. (win32_wait): If CACHED_STATUS was set, return that instead of doing a real wait. Remove the code resuming the execution of the inferior after receiving a TARGET_WAITKIND_LOADED event during the initial phase. Also remove the code changing OURSTATUS->KIND from TARGET_WAITKIND_LOADED to TARGET_WAITKIND_STOPPED.
2013-12-11Fix a bug in matching notifications.Yao Qi2-6/+14
Due to copy-n-paste, the problem caused PR remote/15974 also exists in gdbserver. This patch fixes it in the same way. Patch to fix remote/15974 can be found: https://sourceware.org/ml/gdb-patches/2013-12/msg00014.html gdb/gdbserver: 2013-12-11 Yao Qi <yao@codesourcery.com> * notif.c (handle_notif_ack): Return 0 if no notification matches.
2013-11-20 * linux-low.c (linux_set_resume_request): Fix comment.Doug Evans2-3/+9
2013-11-20 * linux-low.c (resume_status_pending_p): Tweak comment.Doug Evans2-1/+6
2013-11-20Add MPX support to gdbserver.Walfred Tedeschi5-26/+197
2013-05-22 Walfred Tedeschi <walfred.tedeschi@intel.com> gdbserver/ * Makefile.in: Add i386-mpx.c, i386-mpx-linux.c, amd64-mpx.c, amd64-mpx-linux.c, x32-mpx.c and x32-mpx-linux.c generation. * configure.srv (srv_i386_regobj): Add i386-mpx.o. (srv_i386_linux_regobj): Add i386-mpx-linux.o. (srv_amd64_regobj): Add amd64-mpx.o. (srv_amd64_linux_regobj): Add amd64-mpx-linux.o. (srv_i386_32bit_xmlfiles): Add i386/32bit-mpx.xml. (srv_i386_64bit_xmlfiles): Add i386/64bit-mpx.xml. * i387-fp.c (num_pl_bnd_register) Added constant. (num_pl_bnd_cfg_registers) Added constant. (struct i387_xsave) Added reserved area and MPX fields. (i387_cache_to_xsave, i387_xsave_to_cache) Add MPX. * linux-x86-low.c (init_registers_i386_mpx_linux): Declare new function. (tdesc_i386_mpx_linux): Add MPX amd64 target. (init_registers_amd64_mpx_linux): Declare new function. (tdesc_amd64_mpx_linux): Add MPX amd64 target. (x86_64_regmap): Add MPX registers. (x86_linux_read_description): Add MPX case. (initialize_low_arch): Initialize MPX targets. Change-Id: I394d81afa76d11375ce792cefad0ceb9825fb379 Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
2013-11-18remove gdb_stat.hTom Tromey2-2/+2
This patch is purely mechanical. It removes gdb_stat.h and changes the code to use sys/stat.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_stat.h: Remove. * ada-lang.c: Use sys/stat.h, not gdb_stat.h. * common/filestuff.c: Use sys/stat.h, not gdb_stat.h. * common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h. * corefile.c: Use sys/stat.h, not gdb_stat.h. * ctf.c: Use sys/stat.h, not gdb_stat.h. * darwin-nat.c: Use sys/stat.h, not gdb_stat.h. * dbxread.c: Use sys/stat.h, not gdb_stat.h. * dwarf2read.c: Use sys/stat.h, not gdb_stat.h. * exec.c: Use sys/stat.h, not gdb_stat.h. * gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h. * gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h. * inf-child.c: Use sys/stat.h, not gdb_stat.h. * jit.c: Use sys/stat.h, not gdb_stat.h. * linux-nat.c: Use sys/stat.h, not gdb_stat.h. * m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h. * main.c: Use sys/stat.h, not gdb_stat.h. * mdebugread.c: Use sys/stat.h, not gdb_stat.h. * mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h. * nto-tdep.c: Use sys/stat.h, not gdb_stat.h. * objfiles.c: Use sys/stat.h, not gdb_stat.h. * procfs.c: Use sys/stat.h, not gdb_stat.h. * remote-fileio.c: Use sys/stat.h, not gdb_stat.h. * remote-mips.c: Use sys/stat.h, not gdb_stat.h. * remote.c: Use sys/stat.h, not gdb_stat.h. * rs6000-nat.c: Use sys/stat.h, not gdb_stat.h. * sol-thread.c: Use sys/stat.h, not gdb_stat.h. * solib-spu.c: Use sys/stat.h, not gdb_stat.h. * source.c: Use sys/stat.h, not gdb_stat.h. * symfile.c: Use sys/stat.h, not gdb_stat.h. * symmisc.c: Use sys/stat.h, not gdb_stat.h. * symtab.c: Use sys/stat.h, not gdb_stat.h. * top.c: Use sys/stat.h, not gdb_stat.h. * xcoffread.c: Use sys/stat.h, not gdb_stat.h.
2013-11-18stdlib.h is universal tooTom Tromey4-4/+7
stdlib.h is universal as well, so there is no need to check for it. 2013-11-18 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * configure.ac: Don't check for stdlib.h * defs.h: Include stdlib.h unconditionally. 2013-11-18 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * configure.ac: Don't check for stdlib.h. * gdbreplay.c: Unconditionally include stdlib.h.
2013-11-18remove gdb_dirent.hTom Tromey4-334/+6
This removes gdb_dirent.h and updates the code to use dirent.h instead. It also removes the now-useless configure checks. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT. * common/gdb_dirent.h: Remove. * common/filestuff.c: Use dirent.h. * common/linux-osdata.c: Use dirent.h. (NAMELEN): Define. * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT. * linux-fork.c: Use dirent.h * linux-nat.c: Use dirent.h. * nto-procfs.c: Use dirent.h. * procfs.c: Use dirent.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * config.in: Rebuild. * configure: Rebuild. * configure.ac: Don't use AC_HEADER_DIRENT.
2013-11-18don't check for string.h or strings.hTom Tromey4-5/+7
Now that we are using the gnulib string.h module, we don't need to check for string.h or strings.h. This removes the last few checks from the source and from the configure scripts. 2013-11-18 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * common/common.m4 (GDB_AC_COMMON): Don't check for string.h or strings.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * server.h: Don't check HAVE_STRING_H. * gdbreplay.c: Don't check HAVE_STRING_H. * configure: Rebuild.
2013-11-18link gdbreplay against gnulibTom Tromey2-2/+7
Later patches in this series will make changes to gdb and gdbserver configury, necessitating the use of gnulib in gdbreplay. This patch introduces the dependency early, so that subsequent patches don't break the build. 2013-11-18 Tom Tromey <tromey@redhat.com> * Makefile.in (gdbreplay$(EXEEXT)): Depend on and link against LIBGNU.
2013-11-08remove unused gdbserver configuryTom Tromey4-94/+11
This updates gdbserver's configure.ac to remove checks that aren't directly needed by gdbserver. 2013-11-08 Tom Tromey <tromey@redhat.com> * configure, config.in: Rebuild. * configure.ac: Remove unused configury.
2013-11-08introduce common.m4Tom Tromey5-0/+581
It has bothered me for a while that files in common/ use macros defined via autoconf checks, but rely on each configure.ac doing the proper checks independently. This patch introduces common/common.m4 which consolidates the checks assumed by code in common. The rule I propose is that if something is needed or used by common, it should be checked for by common.m4. However, if the check is also needed by gdb or gdbserver, then it should be duplicated there. Built and regtested on x86-64 Fedora 18 (though this is hardly the most strenuous case) and using the Fedora 18 mingw cross compilers. I also examined the config.in diffs to ensure that symbols did not go missing. 2013-11-08 Tom Tromey <tromey@redhat.com> * acinclude.m4: Include common.m4. * common/common.m4: New file. * configure, config.in: Rebuild. * configure.ac: Use GDB_AC_COMMON. 2013-11-08 Tom Tromey <tromey@redhat.com> * acinclude.m4: Include common.m4, codeset.m4. * configure, config.in: Rebuild. * configure.ac: Use GDB_AC_COMMON.
2013-11-06S390: Fix TDB regset recognitionAndreas Arnez2-18/+36
When checking for the presence of the TDB regset, the current code interprets ENODATA from PTRACE_GETREGSET as an indication that the TDB regset *could* occur on this system, but the inferior stopped outside a transaction. However, the Linux kernel actually reports ENODATA even on systems without the transactional execution facility. Thus the logic is now changed to check the TE field in the HWCAP as well. This version also checks the existence of the TDB regset -- just to be on the safe side when running on TE-enabled hardware with a kernel that does not offer the TDB regset for some reason. gdb/ * s390-linux-nat.c (s390_read_description): Consider the TE field in the HWCAP for determining 'have_regset_tdb'. gdbserver/ * linux-s390-low.c (HWCAP_S390_TE): New define. (s390_arch_setup): Consider the TE field in the HWCAP for determining 'have_regset_tdb'.
2013-10-16There were two functions who were calling "sizeof" twice.Sergio Durigan Junior2-1/+7
The first one, dw2_get_real_path from gdb/dwarf2read.c, was actually making use of OBSTACK_CALLOC which already calls "sizeof" for its third argument. The second, download_tracepoint_1 from gdb/gdbserver/tracepoint.c, was explicitly calling "sizeof" inside another "sizeof". This patch fixed both functions. gdb/ChangeLog 2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com> PR gdb/16014 * dwarf2read.c (dw2_get_real_path): Remove unnecessary call to sizeof. gdb/gdbserver/ChangeLog 2013-10-16 Sergio Durigan Junior <sergiodj@redhat.com> PR gdb/16014 * tracepoint.c (download_tracepoint_1): Remove unnecessary double call to sizeof.
generated by cgit v1.1 at 2024-11-29 03:39:41 +0000