aboutsummaryrefslogtreecommitdiff
path: root/gdb/gdbserver/server.h
AgeCommit message (Collapse)AuthorFilesLines
2014-11-21Include alloca.h unconditionallyYao Qi1-9/+0
Since gnulib alloca module was imported, we can include alloca.h in both gdb and gdbserver unconditionally, so this patch adds inclusion of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA in configure.ac because we don't need to check alloca any more. This patch below is removed in fact. [RFA/commit] include alloca.h if available. https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html Since alloca.h is from gnulib now, we don't have to check malloc.h in configure and include malloc.h in code. This patch also remove them too. gdb: 2014-11-21 Yao Qi <yao@codesourcery.com> * common/common-defs.h: Include alloca.h * configure.ac: Don't invoke AC_FUNC_ALLOCA. * configure: Re-generated. * defs.h: Remove code handling alloca. * utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined or not. gdb/gdbserver: 2014-11-21 Yao Qi <yao@codesourcery.com> * configure.ac: Don't invoke AC_FUNC_ALLOCA. (AC_CHECK_HEADERS): Remove malloc.h. * configure: Re-generated. * config.in: Re-generated. * server.h: Don't include alloca.h and malloc.h. * gdbreplay.c: Don't check HAVE_ALLOCA_H is defined. Don't include malloc.h.
2014-10-08Include common-exceptions.h in common-defs.hGary Benson1-2/+0
This commit includes common-exceptions.h in common-defs.h and removes all other inclusions. gdb/ChangeLog: * common/common-defs.h: Include common-exceptions.h. * exceptions.h: Do not include common-exceptions.h. gdb/gdbserver/ChangeLog: * server.h: Do not include common-exceptions.h.
2014-10-08Include cleanups.h in common-defs.hGary Benson1-1/+0
This commit includes cleanups.h in common-defs.h and removes all other inclusions. gdb/ChangeLog: * common/common-defs.h: Include cleanups.h. * common/common-exceptions.c: Do not include cleanups.h. * utils.h: Likewise. gdb/gdbserver/ChangeLog: * server.h: Do not include cleanups.h.
2014-09-11Introduce show_debug_regsGary Benson1-1/+0
This commit adds a new global flag show_debug_regs to common-debug.h to replace the flag debug_hw_points used by gdbserver and by the Linux x86 and AArch64 ports, and to replace the flag maint_show_dr used by the Linux MIPS port. Note that some debug printing in the AArch64 port was enabled only if debug_hw_points > 1 but no way to set debug_hw_points to values other than 0 and 1 was provided; that code was effectively dead. This commit enables all debug printing if show_debug_regs is nonzero, so the AArch64 output will be more verbose than previously. gdb/ChangeLog: * common/common-debug.h (show_debug_regs): Declare. * common/common-debug.c (show_debug_regs): Define. * aarch64-linux-nat.c (debug_hw_points): Don't define. Replace all uses with show_debug_regs. Replace all uses that considered debug_hw_points as a multi-value integer with straight boolean uses. * x86-nat.c (debug_hw_points): Don't define. Replace all uses with show_debug_regs. * nat/x86-dregs.c (debug_hw_points): Don't declare. Replace all uses with show_debug_regs. * mips-linux-nat.c (maint_show_dr): Don't define. Replace all uses with show_debug_regs. gdb/gdbserver/ChangeLog: * server.h (debug_hw_points): Don't declare. * server.c (debug_hw_points): Don't define. Replace all uses with show_debug_regs. * linux-aarch64-low.c (debug_hw_points): Don't define. Replace all uses with show_debug_regs.
2014-08-29Use exceptions and cleanups in gdbserverGary Benson1-4/+3
This commit replaces the hacky "exception" system in gdbserver with the exceptions and cleanups subsystem from GDB. Only the catch/cleanup code in what was "main" has been updated to use the new system. Other parts of gdbserver can now be converted to use TRY_CATCH and cleanups on an as-needed basis. A side-effect of this commit is that some error messages will change slightly, and in cases with multiple errors the error messages will be printed in a different order. gdb/gdbserver/ChangeLog: * server.h (setjmp.h): Do not include. (toplevel): Do not declare. (common-exceptions.h): Include. (cleanups.h): Likewise. * server.c (toplevel): Do not define. (exit_code): New static global. (detach_or_kill_for_exit_cleanup): New function. (main): New function. Original main renamed to... (captured_main): New function. * utils.c (verror) [!IN_PROCESS_AGENT]: Use throw_verror.
2014-08-19Introduce common-types.hGary Benson1-11/+2
This introduces common-types.h. This file defines various standard types used by gdb and gdbserver. Currently these types are conditionally defined based on GDBSERVER. The long term goal is to remove all such tests; however, this is difficult as currently gdb uses definitions from BFD. In the meantime this is still a step in the right direction. gdb/ChangeLog: * common/common-types.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add common/common-types.h. * common/common-defs.h: Include common-types.h. * defs.h (gdb_byte, CORE_ADDR, CORE_ADDR_MAX, LONGEST) (ULONGEST): Remove. gdb/gdbserver/ChangeLog: * server.h: Add static assertion. (gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Remove.
2014-08-07Move errno.h to common-defs.hGary Benson1-3/+0
This commit moves the inclusion of errno.h to common-defs.h and removes all other inclusions. Note that prior to this commit server.h included errno.h protected by "#ifdef HAVE_ERRNO_H". This protection was added with the Windows CE port, which is currently broken. Since no other platform needs this, I have removed the protection and the configury to support it. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include errno.h. * defs.h: Do not include errno.h. * ada-typeprint.c: Likewise. * c-typeprint.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * event-loop.c: Likewise. * f-typeprint.c: Likewise. * gnu-nat.c: Likewise. * go32-nat.c: Likewise. * i386gnu-nat.c: Likewise. * m2-typeprint.c: Likewise. * nat/linux-btrace.c: Likewise. * p-typeprint.c: Likewise. * procfs.c: Likewise. * remote-sim.c: Likewise. * rs6000-nat.c: Likewise. * target.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * configure.ac (AC_CHECK_HEADERS): Remove errno.h. * configure: Regenerate. * config.in: Likewise. * server.h: Do not include errno.h. * event-loop.c: Likewise. * hostio-errno.c: Likewise. * linux-low.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. * gdbreplay.c: Unconditionally include errno.h.
2014-08-07Include string.h in common-defs.hGary Benson1-2/+0
This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise.
2014-08-07Include gdb_assert.h in common-defs.hGary Benson1-2/+0
This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h.
2014-08-07Move common-utils.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of common-utils.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include common-utils.h. * defs.h: Do not include common-utils.h. * common/gdb_assert.h: Likewise. * darwin-nat.h: Likewise. * nat/linux-btrace.c: Likewise. * target/waitstatus.h: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include common-utils.h.
2014-08-07Move ptid.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of ptid.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include ptid.h. * defs.h: Do not include ptid.h. * inferior.h: Likewise. * infrun.h: Likewise. * nat/linux-btrace.h: Likewise. * nat/linux-osdata.h: Likewise. * target/waitstatus.h: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include ptid.h. * notif.h: Likewise.
2014-08-07Move gdb_locale.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of gdb_locale.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_locale.h. * defs.h: Do not include gdb_locale.h. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_locale.h.
2014-08-07Move gdb/signals.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of gdb/signals.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb/signals.h. * defs.h: Do not include gdb/signals.h. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb/signals.h. * win32-low.c: Likewise.
2014-08-07Move pathmax.h to common-defs.hGary Benson1-3/+0
This commit moves the inclusion of pathmax.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include pathmax.h. * defs.h: Do not include pathmax.h. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include pathmax.h.
2014-08-07Move libiberty.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of libiberty.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include libiberty.h. * defs.h: Do not include libiberty.h. * common/queue.h: Likewise. * cp-name-parser.y: Likewise. * mi/mi-cmd-catch.c: Likewise. * python/python.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include libiberty.h. * linux-bfin-low.c: Likewise.
2014-08-07Move ansidecl.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of ansidecl.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include ansidecl.h. * defs.h: Do not include ansidecl.h. * common/buffer.h: Likewise. * common/common-utils.h: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include ansidecl.h.
2014-08-07Move stdarg.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of stdarg.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stdarg.h. * defs.h: Do not include stdarg.h. * ada-lang.c: Likewise. * common/common-utils.h: Likewise. * guile/scm-string.c: Likewise. * guile/scm-utils.c: Likewise. * m32c-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include stdarg.h. * nto-low.c: Likewise.
2014-08-07Move stdlib.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of stdlib.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stdlib.h. * defs.h: Do not include stdlib.h. * addrmap.c: Likewise. * bcache.c: Likewise. * common/buffer.c: Likewise. * common/common-utils.c: Likewise. * cp-name-parser.y: Likewise. * go32-nat.c: Likewise. * mn10300-linux-tdep.c: Likewise. * nat/linux-osdata.c: Likewise. * tui/tui.c: Likewise. * windows-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include stdlib.h. * inferiors.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * spu-low.c: Likewise. * tracepoint.c: Likewise. * utils.c: Likewise.
2014-08-07Move stdio.h to common-defs.hGary Benson1-1/+0
This commit moves the inclusion of stdio.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stdio.h. * defs.h: Do not include stdio.h. * ada-lang.c: Likewise. * common/buffer.c: Likewise. * common/common-utils.c: Likewise. * cp-name-parser.y: Likewise. * gnu-nat.c: Likewise. * go32-nat.c: Likewise. * i386gnu-nat.c: Likewise. * proc-api.c: Likewise. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * python/python-internal.h: Likewise. * target-memory.c: Likewise. * tui/tui-io.c: Likewise. * tui/tui.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include stdio.h. * linux-low.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise. * wincecompat.c: Likewise.
2014-07-30Introduce common/common-defs.hGary Benson1-2/+1
This commit creates a new header, common/common-defs.h, to hold definitions common to all code under gdb/. Both gdb/defs.h and gdb/gdbserver/server.h are modified to include common-defs.h as their first non-comment line; all code under gdb/ includes either defs.h or server.h as appropriate, so common-defs.h will be the first actual code the compiler sees. For this initial commit common-defs.h includes only the two config.h files. Future commits will move more code currently duplicated across defs.h and server.h such that shared code in gdb/{common,target,nat} can be modified to include common-defs.h rather than defs.h or server.h. gdb/ 2014-07-30 Gary Benson <gbenson@redhat.com> * common/common-defs.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add common/common-defs.h. * defs.h: Include common-defs.h. Do not include config.h or build-gnulib/config.h. gdb/gdbserver/ 2014-07-30 Gary Benson <gbenson@redhat.com> * server.h: Include common-defs.h. Do not include config.h or build-gnulib-gdbserver/config.h.
2014-07-24Make gdbserver CORE_ADDR unsignedTom Tromey1-1/+1
gdbserver defines CORE_ADDR to be signed. This seems erroneous to me; and furthermore likely to cause problems in common/, as it is different from gdb's definition. gdb/gdbserver/ 2014-07-24 Tom Tromey <tromey@redhat.com> Gary Benson <gbenson@redhat.com> * server.h (CORE_ADDR): Now unsigned.
2014-01-22 New gdbserver option --debug-format=timestamp.Doug Evans1-1/+1
* NEWS: Mention it. gdbserver/ * configure.ac (AC_CHECK_FUNCS): Add test for gettimeofday. * configure: Regenerate. * config.in: Regenerate. * Makefile.in (SFILES): Add debug.c. (OBS): Add debug.o. * debug.c: New file. * debug.h: New file. * linux-aarch64-low.c (*): Update all debugging printfs to use debug_printf instead of fprintf. * linux-arm-low.c (*): Ditto. * linux-cris-low.c (*): Ditto. * linux-crisv32-low.c (*): Ditto. * linux-m32r-low.c (*): Ditto. * linux-sparc-low.c (*): Ditto. * linux-x86.c (*): Ditto. * linux-low.c (*): Ditto. (linux_wait_1): Add calls to debug_enter, debug_exit. (linux_wait): Remove redundant debugging printf. (stop_all_lwps): Add calls to debug_enter, debug_exit. (linux_resume, unstop_all_lwps): Ditto. * mem-break.c (*): Update all debugging printfs to use debug_printf instead of fprintf. * remote-utils.c (*): Ditto. * thread-db.c (*): Ditto. * server.c #include <ctype.h>, "gdb_vecs.h". (debug_threads): Moved to debug.c. (*): Update all debugging printfs to use debug_printf instead of fprintf. (start_inferior): Replace call to fflush with call to debug_flush. (monitor_show_help): Mention set debug-format. (parse_debug_format_options): New function. (handle_monitor_command): Handle "monitor set debug-format". (gdbserver_usage): Mention --debug-format. (main): Parse --debug-format. * server.h (debug_threads): Declaration moved to debug.h. #include "debug.h". * tracepoint.c (trace_debug_1) [!IN_PROCESS_AGENT]: Add version of trace_debug_1 that uses debug_printf. (tracepoint_look_up_symbols): Update all debugging printfs to use debug_printf instead of fprintf. doc/ * gdb.texinfo (Server): Mention --debug-format=all|none|timestamp. (gdbserver man): Ditto. testsuite/ * gdb.server/server-mon.exp: Add tests for "set debug-format".
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-18don't check for string.h or strings.hTom Tromey1-2/+0
Now that we are using the gnulib string.h module, we don't need to check for string.h or strings.h. This removes the last few checks from the source and from the configure scripts. 2013-11-18 Tom Tromey <tromey@redhat.com> * configure: Rebuild. * common/common.m4 (GDB_AC_COMMON): Don't check for string.h or strings.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * server.h: Don't check HAVE_STRING_H. * gdbreplay.c: Don't check HAVE_STRING_H. * configure: Rebuild.
2013-09-05[gdbserver] Split a new hostio.h file out of server.h.Pedro Alves1-6/+0
gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * server.h (handle_vFile, hostio_last_error_from_errno): Move to ... * hostio.h: ... this new file. * hostio.c, server.c, linux-low.c, nto-low.c, spu-low, win32-low.c: Include hostio.h.
2013-09-05[gdbserver] Split a new event-loop.h file out of server.h.Pedro Alves1-14/+1
gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * server.h (gdb_client_data, handler_func, callback_handler_func) (delete_file_handler, add_file_handler, append_callback_event) (delete_callback_event, start_event_loop, initialize_event_loop): Move to event-loop.h and include it. * event-loop.h: New file.
2013-09-05[gdbserver] Split a new dll.h file out of server.h.Pedro Alves1-16/+0
gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * dll.c, inferiors.c, remote-utils.c, server.c: Include "dll.h". * server.h (struct dll_info, all_dlls, dlls_changed, clear_dlls) (loaded_dll, unloaded_dll): Move to ... * dll.h: ... this new file. * inferiors.c, remote-utils.c, win32-low.c: Include "dll.h".
2013-09-05[gdbserver] Split a new inferiors.h file out of server.h.Pedro Alves1-95/+2
gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * server.h (current_process, get_thread_process, all_processes) (add_inferior_to_list, for_each_inferior, current_inferior) (remove_inferior, add_process, remove_process, find_process_pid) (have_started_inferiors_p, have_attached_inferiors_p) (thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id) (clear_inferiors, find_inferior, find_inferior_id) (inferior_target_data, set_inferior_target_data) (inferior_regcache_data, set_inferior_regcache_data): Move to inferiors.h, and include it. * inferiors.h: New file.
2013-09-05[gdbserver] Move bytecode compilation bits from server.h to ax.h.Pedro Alves1-56/+0
gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * server.h (struct emit_ops, current_insn_ptr, emit_error): Move ... * ax.h: ... here.
2013-09-05[gdbserver] Split a new tracepoint.h file out of server.h.Pedro Alves1-112/+0
gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * ax.c, linux-low.c, linux-x86-low.c, server.c: Include tracepoint.h. * server.h (IPA_BUFSIZ, initialize_tracepoint, tracing) (disconnected_tracing, tracepoint_look_up_symbols, stop_tracing (handle_tracepoint_general_set, handle_tracepoint_query) (tracepoint_finished_step, tracepoint_was_hit) (release_while_stepping_state_list, current_traceframe) (in_readonly_region, traceframe_read_mem) (fetch_traceframe_registers, traceframe_read_sdata) (traceframe_read_info, struct fast_tpoint_collect_status) (fast_tracepoint_collecting, force_unlock_trace_buffer) (handle_tracepoit_bkpts, initialize_low_tracepoint) (supply_fast_tracepoint_registers) (supply_static_tracepoint_registers, set_trampoline_buffer_space) (ipa_tdesc, claim_trampoline_space) (have_fast_tracepoint_trampoline_buffer, gdb_agent_about_to_close) (agent_mem_read, agent_get_trace_state_variable_value) (agent_set_trace_state_variable_value, agent_tsv_read) (agent_mem_read_string, get_raw_reg_func_addr) (get_get_tsv_func_addr, get_set_tsv_func_addr): Move to ... * tracepoint.h: ... this new file.
2013-09-05[gdbserver] Split a new utils.h file out of server.h.Pedro Alves1-11/+1
gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * server.h (perror_with_name, error, fatal, warning, paddress) (pulongest, plongest, phex_nz, pfildes): Move to utils.h, and include it. * utils.h: New file.
2013-09-05[gdbserver] Split a new remote-utils.h file out of server.h.Pedro Alves1-64/+1
gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * server.h (remote_debug, noack_mode, transport_is_reliable) (gdb_connected, STDIO_CONNECTION_NAME, remote_connection_is_stdio) (read_ptid, write_ptid, putpkt, putpkt_binary, putpkt_notif) (getpkt, remote_prepare, remote_open, remote_close, write_ok) (write_enn, initialize_async_io, enable_async_io) (disable_async_io, check_remote_input_interrupt_request) (convert_ascii_to_int, convert_int_to_ascii, new_thread_notify) (dead_thread_notify, prepare_resume_reply) (decode_address_to_semicolon, decode_address, decode_m_packet) (decode_M_packet, decode_X_packet, decode_xfer_write) (decode_search_memory_packet, unhexify, hexify) (remote_escape_output, unpack_varlen_hex, clear_symbol_cache) (look_up_one_symbol, relocate_instruction) (monitor_output): Move to remote-utils.h, and include it. * remote-utils.h: New file.
2013-09-05[gdbserver] Delete _ macro (gettext).Pedro Alves1-6/+0
server.h nowadays includes gdb_locale.h, which already brings this in. gdb/gdbserver/ 2013-09-05 Pedro Alves <palves@redhat.com> * server.h (_): Delete.
2013-07-01Normalize on PATH_MAX instead of MAXPATHLEN throughout.Pedro Alves1-0/+3
With the pathmax gnulib module in place, we can use PATH_MAX consistently throughout, instead of the current mixbag of PATH_MAX and MAXPATHLEN uses. It's no longer necessary to include sys/param.h (supposedly, I can't check all ports touched here) for MAXPATHLEN. Don't remove sys/param.h from GDB's configure.ac, as later tests in the file use HAVE_SYS_PARAM_H checks. Tested on x86_64 Fedora 17. Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp. gdb/ 2013-07-01 Pedro Alves <palves@redhat.com> * defs.h: Include "pathmax.h". * utils.c: Don't include sys/param.h. (gdb_realpath): Remove code that checks for MAXPATHLEN. * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX instead of MAXPATHLEN. * solib-sunos.c: Don't include sys/param.h. * xcoffread.c: Don't include sys/param.h. * bsd-kvm.c: Don't include sys/param.h. * darwin-nat.c: Don't include sys/param.h. (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * darwin-nat-info.c: Don't include sys/param.h. * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * i386obsd-nat.c: Don't include sys/param.h. * inf-child.c: Don't include sys/param.h. (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN. * linux-fork.c: Don't include sys/param.h. (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN. * linux-nat.c: Don't include sys/param.h. (linux_child_pid_to_exec_file, linux_proc_pending_signals) (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN. * m68klinux-nat.c: Don't include sys/param.h. * nbsd-nat.c: Don't include sys/param.h. (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * ppc-linux-nat.c: Don't include sys/param.h. * rs6000-nat.c: Don't include sys/param.h. * spu-linux-nat.c. Don't include sys/param.h. * windows-nat.c: Don't include sys/param.h. * xtensa-linux-nat.c: Don't include sys/param.h. * config/i386/nm-fbsd.h: Don't include sys/param.h. gdb/gdbserver/ 2013-07-01 Pedro Alves <palves@redhat.com> * server.h: Include "pathmax.h". * linux-low.c: Don't include sys/param.h. (linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of MAXPATHLEN. * win32-low.c: Don't include sys/param.h. (win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
2013-06-24don't keep a gdb-specific dateTom Tromey1-4/+1
Right now there are two nightly commits to update a file in the tree with the current date. One commit is for BFD, one is for gdb. It seems unnecessary to me to do this twice. We can make do with a single such commit. This patch changes gdb in a minimal way to reuse the BFD date -- it extracts it from bfd/version.h and changes version.in to use the placeholder string "DATE" for those times when a date is wanted. I propose removing the cron job that updates the version on trunk, and then check in this patch. For release branches, we can keep the cron job, but just tell it to rewrite bfd/version.h. I believe this is a simple change in the crontab -- the script will work just fine on this file. This also moves version.in and version.h into common/, to reflect their shared status; and updates gdbserver to use version.h besides. * common/create-version.sh: New file. * Makefile.in (version.c): Use bfd/version.h, common/version.in, create-version.sh. (HFILES_NO_SRCDIR): Use common/version.h. * version.in: Move to ... * common/version.in: ... here. Replace date with "DATE". * version.h: Move to ... * common/version.h: ... here. gdbserver: * Makefile.in (version.c): Use bfd/version.h, common/version.in, create-version.sh. (version.o): Remove. * gdbreplay.c: Include version.h. (version, host_name): Don't declare. * server.h: Include version.h. (version, host_name): Don't declare. doc: * Makefile.in (POD2MAN1, POD2MAN5): Use version.subst. (GDBvn.texi): Use version.subst. (version.subst): New target. (mostlyclean): Remove version.subst.
2013-06-07[GDBserver] Multi-process + multi-archPedro Alves1-0/+6
This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-01-25gdb/gdbserverYao Qi1-0/+1
* event-loop.c: Include "queue.h". (gdb_event_p): New typedef. (struct gdb_event) <next_event>: Remove. (event_queue): Change to QUEUE(gdb_event_p). (async_queue_event): Remove. (gdb_event_xfree): New. (initialize_event_loop): New. (process_event): Use API from QUEUE. (wait_for_event): Likewise. * server.c (main): Call initialize_event_loop. * server.h (initialize_event_loop): Declare.
2013-01-18gdb/gdbserver:Yao Qi1-3/+4
* ax.h (struct eval_agent_expr_context): New. (gdb_eval_agent_expr): Update declaration. * ax.c (gdb_eval_agent_expr): Remove argument REGCACHE and TFRAME. Add new argument CTX. * server.h (struct eval_agent_expr_context): Declare. (agent_mem_read, agent_tsv_read): Update declaration. (agent_mem_read_string): Likewise. * tracepoint.c (eval_tracepoint_agent_expr): Remove. (add_traceframe_block): Add new argument TPOINT. Increase TPOINT->traceframe_usage. (do_action_at_tracepoint): Call gdb_eval_agent_expr instead of eval_tracepoint_agent_expr. (condition_true_at_tracepoint): Likewise. (agent_mem_read): Remove argument TFRAME. Add argument CTX. (agent_mem_read_string, agent_tsv_read): Likewise. Callers update. gdb/testsuite: * gdb.trace/infotrace.exp: Check 'traceframe usage' in the output of 'info tracepoints'. * gdb.trace/disconnected-tracing.exp (disconnected_tracing): Likewise. * gdb.trace/tstatus.exp (run_trace_experiment): Likewise. * gdb.trace/disconnected-tracing.c (struct foo): New.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-2/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-12-15gdb/gdbserver/Yao Qi1-2/+0
2012-12-15 Yao Qi <yao@codesourcery.com> * Makefile.in (OBS): Add notif.o. * notif.c, notif.h: New. * server.c: Include "notif.h". (struct vstop_notif) <next>: Remove. <base>: New field. (queue_stop_reply): Update. (push_event, send_next_stop_reply): Remove. (discard_queued_stop_replies): Update. (notif_stop): New variable. (handle_v_stopped): Remove. (handle_v_requests): Don't call handle_v_stopped. Call handle_ack_notif instead. (queue_stop_reply_callback): Call notif_event_enque instead of queue_stop_reply. (handle_status): Don't call send_next_stop_reply, call notif_write_event instead. (kill_inferior_callback): Likewise. (detach_or_kill_inferior_callback): Likewise. (main): Call initialize_notif. (process_serial_event): Call QUEUE_is_empty. (handle_target_event): Call notif_push instead of push event. * server.h (push_event): Remove declaration.
2012-12-05 PR gdb/14917:Tom Tromey1-2/+2
* server.h (current_insn_ptr, emit_error): Declare 'extern'.
2012-08-28gdb/gdbserver/Yao Qi1-35/+6
* ax.c, tracepoint.c: Replace ATTR_FORMAT with ATTRIBUTE_PRINTF. * server.h: Include 'libiberty.h' and 'ansidecl.h'. (ATTR_NORETURN, ATTR_FORMAT, ATTR_MALLOC): Remove. Remove declarations of xmalloc, xreallloc, xstrdup and freeargv. * Makefile.in (libiberty_h): New. (server_h): Append dependencies 'libiberty.h' and 'ansidecl.h'. (linux-bfin-low.o): Append dependency 'libiberty.h'.
2012-08-23gdb/gdbserver/Yao Qi1-2/+1
* server.h: Remove declaration of 'xsnprintf'.
2012-08-22 * defs.h: Include build-gnulib/config.hKeith Seitz1-0/+1
* server.h: Include build-gnulib-gbserver/config.h. * gdbreplay.c: Likewise.
2012-07-27gdb/gdbserver/Yao Qi1-0/+1
PR remote/14161. * server.h: Declare gdb_agent_about_to_close. * target.c (kill_inferior): Include "agent.h". New. Send command 'kill'. * target.h (kill_inferior): Removed macro. * tracepoint.c (gdb_agent_about_to_close): New. (gdb_agent_helper_thread): Handle command 'close'. Wait endlessly until the inferior stops. Install gdb_agent_remove_socket to atexit hook. (agent_socket_name): New static variable. (gdb_agent_socket_init): Replace local variable 'name' with 'agent_socket_name'. (gdb_agent_remove_socket): New. gdb/doc/ * gdb.texinfo (IPA Protocol Commands): Document new command 'close'. gdb/testsuite/ KFAIL for PR remote/14161. * gdb.trace/strace.exp (strace_remove_socket): kfail for native. Cleanup socket files. (strace_info_marker): Detach inferior.
2012-04-29gdb/gdbserver:Yao Qi1-44/+2
* server.h: Move some code to ... * gdbthread.h: ... here. New. * Makefile.in (inferiors.o, regcache.o): Depends on gdbthread.h (remote-utils.o, server.o, target.o tracepoint.o): Likewise. (nto-low.o, win32-low.o): Likewise. * inferiors.c, linux-low.h, nto-low.c: Include gdbthread.h. * regcache.c, remote-utils.c, server.c: Likewise. * target.c, tracepoint.c, win32-low.c: Likewise.
2012-04-192012-04-19 Pedro Alves <palves@redhat.com>Pedro Alves1-4/+0
* configure.ac: Remove AC_CHECK_DECLS check for memmem. * server.h (memmem): Remove declaration. * config.in: Regenerate. * configure: Regenerate.
2012-03-072012-03-07 Pedro Alves <palves@redhat.com>Pedro Alves1-0/+2
gdb/doc/ * gdb.texinfo (General Query Packets): Document new QProgramSignals packet. * gdb.texinfo (Remote configuration): Mention "program-signals-packet". gdb/gdbserver/ * linux-low.c (get_detach_signal): New. (linux_detach_one_lwp): Get rid of a pending SIGSTOP with SIGCONT. Pass on pending signals to PTRACE_DETACH. Check the result of the ptrace call. * server.c (program_signals, program_signals_p): New. (handle_general_set): Handle QProgramSignals. * server.h (program_signals, program_signals_p): Declare. gdb/ * NEWS: Mention QProgramSignals. * inferior.h (update_signals_program_target): Declare. * infrun.c: (update_signals_program_target): New. (handle_command): Update the target of the new program signals array changes. * remote.c (PACKET_QProgramSignals): New enum. (last_program_signals_packet): New global. (remote_program_signals): New. (remote_start_remote): Update the target with the program signals list. (remote_protocol_features): Add entry for QPassSignals. (remote_open_1): Free anc clear last_program_signals_packet. (init_remote_ops): Install remote_program_signals. * target.c (update_current_target): Adjust. (target_program_signals): New. * target.h (struct target_ops) <to_program_signals>: New field. (target_program_signals): Declare.
2012-03-03gdb:Yao Qi1-2/+0
* common/agent.c (agent_loaded_p): New. (agent_look_up_symbols): New global. * common/agent.h: Declare agent_loaded_p. gdb/gdbserver: * Makefile.in (linux-low.o): Keep dependence on agent.h. (linux-x86-low.o): Likewise. * server.h: Remove in_process_agent_loaded. * tracepoint.c (in_process_agent_loaded): Removed. Moved it common/agent.c. Update callers.
2012-03-022012-03-02 Pedro Alves <palves@redhat.com>Pedro Alves1-2/+0
* inferiors.c (add_pid_to_list, pull_pid_from_list): Delete. * linux-low.c (struct simple_pid_list): New. (stopped_pids): New a struct simple_pid_list pointer. (add_to_pid_list, pull_pid_from_list): New. (handle_extended_wait): Don't assume the first signal new children report is SIGSTOP. Adjust call to pull_pid_from_list. (linux_wait_for_lwp): Adjust.
generated by cgit v1.1 at 2024-11-19 23:19:04 +0000