| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Denys Vlasenko <dvlasenk@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
(struct elf_internal_linux_prpsinfo): Forward declare.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include `cli/cli-utils.h'.
(linux_fill_prpsinfo): New function.
(linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's
an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
depending on gdbarch pointer bitness.
* ppc-linux-tdep.c: Include elf-bfd.h.
(ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
on 32-bit.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
copyright.py was updating gdbarch.sh' copyright years, but not
the function that genarates the copyright headers for gdbarch.[hc].
This patch makes the following changes:
- fixes gdbarch.sh and regenerates gdbarch.[hc]
- Modify copyright.py to remind the user to update gdbarch.sh
by hand. This should also remind the user to rerun the script
and update gdbarch.[hc] - see next point;
- Allow copyright.py to update gdbarch.[hc]'c copyright years,
even though these are generated files; This should free
the user from having to update gdbarch.[hc] himself;
gdb/ChangeLog:
* gdbarch.sh (copyright): Update copyright years.
* gdbarch.h, gdbarch.c: Regenerate.
* copyright.py (EXCLUDE_LIST): Remove gdbarch.h and gdbarch.c.
(MULTIPLE_COPYRIGHT_HEADERS): Add 'gdb/gdbarch.sh'.
|
|
gdb/ChangeLog:
* gdbarch.sh: Add "struct ravenscar_arch_ops" advance
declaration.
(ravenscar_ops): New gdbarch variable.
* gdbarch.h, gdbarch.c: Regenerate.
* ravenscar-thread.h (ravenscar_register_arch_ops): Delete.
* ravenscar-thread.c (current_arch_ops): Delete.
(ravenscar_fetch_registers): Get the ravenscar_arch_ops
from the gdbarch.
(ravenscar_store_registers, ravenscar_prepare_to_store): Likewise.
(ravenscar_inferior_created): Add gdbarch_ravenscar_ops check.
(ravenscar_register_arch_ops): Delete.
* ravenscar-sparc-thread.h: New file.
* ravenscar-sparc-thread.c: #include "ravenscar-sparc-thread.h".
(ravenscar_sparc_ops): Define value statically.
(_initialize_ravenscar_sparc): Delete.
(register_sparc_ravenscar_ops): New function.
* sparc-tdep.c: #include "ravenscar-sparc-thread.h".
(sparc32_gdbarch_init): Add call to register_sparc_ravenscar_ops.
* Makefile.in (ALL_TARGET_OBS): Add ravenscar-thread.o and
ravenscar-sparc-thread.o.
(SFILES): Add ravenscar-thread.c.
(HFILES_NO_SRCDIR): Add ravenscar-sparc-thread.h.
(ALLDEPFILES): ravenscar-sparc-thread.c.
* configure.tgt: Add ravenscar-thread.o and ravenscar-sparc-thread.o
to gdb_target_obs
for all the targets that use sparc-tdep.o.
|
|
* NEWS: Mention "info proc" and core files.
* corelow.c (core_info_proc): New function.
(init_core_ops): Set to_info_proc.
* gdbarch.c, gdbarch.h: Rebuild.
* gdbarch.sh (core_info_proc): New method.
* infcmd.c (info_proc_cmd_1): Invoke target_info_proc first.
* linux-tdep.c (linux_core_info_proc_mappings)
(linux_core_info_proc): New functions.
(linux_find_memory_region_ftype): New typedef.
(linux_find_memory_regions_full): New function, from
linux_find_memory_regions.
(struct linux_find_memory_regions_data): New.
(linux_find_memory_regions_thunk): New function.
(linux_find_memory_regions): Rewrite.
(struct linux_make_mappings_data): New.
(linux_make_mappings_callback)
(linux_make_mappings_corefile_notes): New functions.
(linux_make_corefile_notes): Call linux_make_mappings_corefile_notes.
(linux_init_abi): Call set_gdbarch_core_info_proc.
* target.c (target_info_proc): Return 'int'.
* target.h (target_info_proc): Update.
gdb/doc
* gdb.texinfo (SVR4 Process Information): Mention core files.
gdb/testsuite
* gdb.base/info-proc.exp: Add core file tests.
bfd
* elf.c (elfcore_grok_note) <NT_FILE>: New case.
|
|
2012-11-21 Yao Qi <yao@codesourcery.com>
PR tdep/7438
* gdbarch.sh (smash_text_address): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* arm-tdep.c (arm_smash_text_address): Remove.
(arm_gdbarch_init): Don't call set_gdbarch_smash_text_address.
* hppa-tdep.c (hppa_smash_text_address): Remove.
(hppa_addr_bits_remove): Rename from hppa_smash_text_address.
(hppa_gdbarch_init): Don't call set_gdbarch_smash_text_address.
Caller update.
* coffread.c (coff_symtab_read): Caller update.
* dbxread.c (process_one_symbol): Likewise.
* elfread.c (record_minimal_symbol): Likewise.
* somread.c (som_symtab_read): Likewise.
|
|
* gdbarch.sh (set_target_gdbarch): Rename from
deprecated_target_gdbarch_select_hack.
* arch-utils.c (gdbarch_update_p): Update.
(set_gdbarch_from_file): Update.
|
|
(get_target_gdbarch): Rename to target_gdbarch.
* gdbarch.c, gdbarch.h: Rebuild.
* ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c,
arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c,
darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c,
filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c,
ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c,
mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c,
mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c,
nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c,
procfs.c, progspace.c, ravenscar-thread.c, record.c,
remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c,
rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c,
solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c,
solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c,
spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c,
target-descriptions.c, target.c, target.h, tracepoint.c,
windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c,
common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/python.c: Update.
|
|
2012-11-09 Pedro Alves <palves@redhat.com>
* gdbarch.sh (target_gdbarch) <gdbarch.h>: Reimplement as macro.
(get_target_gdbarch) <gdbarch.h>: New function.
(startup_gdbarch) <gdbarch.h>: Declare.
<gdbarch.c> (target_gdbarch): Delete.
<gdbarch.c> (deprecated_target_gdbarch_select_hack): Set the
current inferior's gdbarch.
<gdbarch.c> (get_target_gdbarch): New function.
* inferior.c: Include target-descriptions.h.
(free_inferior): Free target description info.
(add_inferior_with_spaces): Set the inferior's initial
architecture.
(clone_inferior_command): Copy the original inferior's target
description if it was user specified.
(initialize_inferiors): Add comment.
* inferior.h (struct target_desc_info): Forward declare.
(struct inferior) <gdbarch>: New field.
* linux-nat.c: Include target-descriptions.h.
(linux_child_follow_fork): Copy the parent's architecture and
target description to the child.
* target-descriptions.c: Include inferior.h.
(struct target_desc_info): New structure, holding the equivalents
of ...
(target_desc_fetched, current_target_desc)
(target_description_filename): ... these removed globals.
(get_tdesc_info, target_desc_info_from_user_p)
(copy_inferior_target_desc_info, target_desc_info_free): New.
(target_desc_fetched, current_target_desc)
(target_description_filename): Reimplemented as convenience
macros.
(tdesc_filename_cmd_string): New global.
(set_tdesc_filename_cmd): Copy the string manipulated by the "set
tdescs filename ..." commands to the per-inferior equivalent.
(show_tdesc_filename_cmd): Get the value to show from the
per-inferior description filename.
(_initilize_target_descriptions): Change the "set/show tdesc
filename" commands' variable.
* target-descriptions.h (struct target_desc, struct target_desc_info)
(struct inferior): Forward declare.
(target_find_description, target_clear_description)
(target_current_description): Adjust comments.
(copy_inferior_target_desc_info, target_desc_info_free)
(target_desc_info_from_user_p). Declare.
gdb/testsuite/
2012-11-09 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-arch.exp: New.
|
|
* dwarf2loc.c (entry_values_debug): Add 'unsigned'.
(_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* dwarf2loc.h: Update the declaration of 'entry_values_debug'.
* dwarf2read.c (dwarf2_die_debug): Add 'unsigned'.
(_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'.
(_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* frame.c (frame_debug): Add 'unsigned'.
(_intialize_frame): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* frame.h: Update the declaration of 'frame_debug'.
* gdbtypes.c (overload_debug): Add 'unsigned'.
(_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* inferior.h: Update declaration of 'debug_infrun'.
* infrun.c (debug_infrun): Add 'unsigned'.
(_initialize_infrun): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* jit.c (jit_debug): Add 'unsigned'.
(_initialize_jit): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* linux-nat.c (debug_linux_nat): Add 'unsigned'.
(_initialize_linux_nat): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* linux-thread-db.c (libthread_db_debug): Add 'unsigned'.
(_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* machoread.c (mach_o_debug_level): Add 'unsigned'.
(_initialize_machoread): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'.
* microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'.
(_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd
intead of add_setshow_zinteger_cmd.
* mips-tdep.c (mips_debug): Add 'unsigned'.
(_initialize_mips_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* monitor.c (monitor_debug): Add 'unsigned'.
(_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* observer.c (observer_debug): Add 'unsigned'.
(_initialize_observer): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* parse.c (expressiondebug): Add 'unsigned'.
(_initialize_parse): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.c (record_debug): Add 'unsigned'.
(_initialize_record): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* record.h: Update the declaration of 'record_debug'.
* stap-probe.c (stap_expression_debug): Add 'unsigned'.
(_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* serial.c (global_serial_debug_p): Add 'unsigned'.
(_initialize_serial): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'.
(_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* solib-frv.c (solib_frv_debug): Add 'unsigned'.
(_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* target.c (targetdebug): Add 'unsigned'.
(initialize_targets): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* valops.c (overload_debug): Add 'unsigned'.
* varobj.c (varobjdebug): Add 'unsigned'.
(_initialize_varobj): Call add_setshow_zuinteger_cmd instead of
add_setshow_zinteger_cmd.
* xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'.
(_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* arch-utils.h: Remove the declaration of 'gdbarch_debug'.
* gdbarch.sh (gdbarch_debug): Add 'unsigned'.
(extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd
instead of add_setshow_zinteger_cmd.
* gdbarch.c, gdbarch.h: Re-generated.
|
|
* copying.awk: Print buffer-read-only and vi ro markers.
* copying.c: Rebuild.
* gdbarch.sh (copyright): Print buffer-read-only and vi ro markers.
* gdbarch.c, gdbarch.h: Rebuild.
* target-descriptions.c (maint_print_c_tdesc_cmd): Print
buffer-read-only and vi ro markers.
* features/arm-with-iwmmxt.c: Rebuild.
* features/arm-with-m-fpa-layout.c: Rebuild.
* features/arm-with-m-vfp-d16.c: Rebuild.
* features/arm-with-m.c: Rebuild.
* features/arm-with-neon.c: Rebuild.
* features/arm-with-vfpv2.c: Rebuild.
* features/arm-with-vfpv3.c: Rebuild.
* features/i386/amd64-avx-linux.c: Rebuild.
* features/i386/amd64-avx.c: Rebuild.
* features/i386/amd64-linux.c: Rebuild.
* features/i386/amd64.c: Rebuild.
* features/i386/i386-avx-linux.c: Rebuild.
* features/i386/i386-avx.c: Rebuild.
* features/i386/i386-linux.c: Rebuild.
* features/i386/i386-mmx-linux.c: Rebuild.
* features/i386/i386-mmx.c: Rebuild.
* features/i386/i386.c: Rebuild.
* features/i386/x32-avx-linux.c: Rebuild.
* features/i386/x32-avx.c: Rebuild.
* features/i386/x32-linux.c: Rebuild.
* features/i386/x32.c: Rebuild.
* features/mips-dsp-linux.c: Rebuild.
* features/mips-linux.c: Rebuild.
* features/mips64-dsp-linux.c: Rebuild.
* features/mips64-linux.c: Rebuild.
* features/rs6000/powerpc-32.c: Rebuild.
* features/rs6000/powerpc-32l.c: Rebuild.
* features/rs6000/powerpc-403.c: Rebuild.
* features/rs6000/powerpc-403gc.c: Rebuild.
* features/rs6000/powerpc-405.c: Rebuild.
* features/rs6000/powerpc-505.c: Rebuild.
* features/rs6000/powerpc-601.c: Rebuild.
* features/rs6000/powerpc-602.c: Rebuild.
* features/rs6000/powerpc-603.c: Rebuild.
* features/rs6000/powerpc-604.c: Rebuild.
* features/rs6000/powerpc-64.c: Rebuild.
* features/rs6000/powerpc-64l.c: Rebuild.
* features/rs6000/powerpc-7400.c: Rebuild.
* features/rs6000/powerpc-750.c: Rebuild.
* features/rs6000/powerpc-860.c: Rebuild.
* features/rs6000/powerpc-altivec32.c: Rebuild.
* features/rs6000/powerpc-altivec32l.c: Rebuild.
* features/rs6000/powerpc-altivec64.c: Rebuild.
* features/rs6000/powerpc-altivec64l.c: Rebuild.
* features/rs6000/powerpc-cell32l.c: Rebuild.
* features/rs6000/powerpc-cell64l.c: Rebuild.
* features/rs6000/powerpc-e500.c: Rebuild.
* features/rs6000/powerpc-e500l.c: Rebuild.
* features/rs6000/powerpc-isa205-32l.c: Rebuild.
* features/rs6000/powerpc-isa205-64l.c: Rebuild.
* features/rs6000/powerpc-isa205-altivec32l.c: Rebuild.
* features/rs6000/powerpc-isa205-altivec64l.c: Rebuild.
* features/rs6000/powerpc-isa205-vsx32l.c: Rebuild.
* features/rs6000/powerpc-isa205-vsx64l.c: Rebuild.
* features/rs6000/powerpc-vsx32.c: Rebuild.
* features/rs6000/powerpc-vsx32l.c: Rebuild.
* features/rs6000/powerpc-vsx64.c: Rebuild.
* features/rs6000/powerpc-vsx64l.c: Rebuild.
* features/rs6000/rs6000.c: Rebuild.
* features/s390-linux32.c: Rebuild.
* features/s390-linux32v1.c: Rebuild.
* features/s390-linux32v2.c: Rebuild.
* features/s390-linux64.c: Rebuild.
* features/s390-linux64v1.c: Rebuild.
* features/s390-linux64v2.c: Rebuild.
* features/s390x-linux64.c: Rebuild.
* features/s390x-linux64v1.c: Rebuild.
* features/s390x-linux64v2.c: Rebuild.
* features/tic6x-c62x-linux.c: Rebuild.
* features/tic6x-c62x.c: Rebuild.
* features/tic6x-c64x-linux.c: Rebuild.
* features/tic6x-c64x.c: Rebuild.
* features/tic6x-c64xp-linux.c: Rebuild.
* features/tic6x-c64xp.c: Rebuild.
|
|
* arch-utils.c (default_return_in_first_hidden_param_p): New.
* arch-utils.h: Declare.
* gdbarch.sh: Add return_in_first_hidden_param_p.
* gdbarch.c, gdbarch.h: Regenerated.
* infcall.c (call_function_by_hand): Call
gdbarch_return_in_first_hidden_param_p instead of
language_pass_by_reference.
* m68k-tdep.c (m68k_return_in_first_hidden_param_p): New.
(m68k_gdbarch_init): Install m68k_return_in_first_hidden_param_p.
* sh-tdep.c (sh_return_in_first_hidden_param_p): New.
(sh_gdbarch_init): Install sh_return_in_first_hidden_param_p.
* tic6x-tdep.c (tic6x_push_dummy_call): Remove local variable
`cplus_return_struct_by_reference'.
(tic6x_return_value): Handle language cplusplus.
(tic6x_return_in_first_hidden_param_p): New.
(tic6x_gdbarch_init): Install tic6x_return_in_first_hidden_param_p.
|
|
This patch introduces the "iterate_over_objfiles_in_search_order"
gdbarch method, as well as its default implementation, and converts
the areas where it will matter to using this gdbarch method.
The default method implementation is the only one installed, and
the changes should have no functional impact in terms of behavior.
This only paves the way for the architectures that will need their
own version.
gdb/ChangeLog:
* gdbarch.sh: Add generation of
"iterate_over_objfiles_in_search_order_cb_ftype" typedef in
gdbarch.h. Add include of "objfiles.h" in gdbarch.c.
(iterate_over_objfiles_in_search_order): New gdbarch method.
* gdbarch.h, gdbarch.c: Regenerate.
* objfiles.h (default_iterate_over_objfiles_in_search_order):
Add declaration.
* objfiles.c (default_iterate_over_objfiles_in_search_order):
New function.
* symtab.c (lookup_symbol_aux_objfile): New function, extracted
out of lookup_symbol_aux_symtabs.
(lookup_symbol_aux_symtabs): Replace extracted-out code by
call to lookup_symbol_aux_objfile.
(struct global_sym_lookup_data): New type.
(lookup_symbol_global_iterator_cb): New function.
(lookup_symbol_global): Search for symbol using
gdbarch_iterate_over_objfiles_in_search_order and
lookup_symbol_global_iterator_cb.
* findvar.c (struct minsym_lookup_data): New type.
(minsym_lookup_iterator_cb): New function.
(default_read_var_value) [case LOC_UNRESOLVED]: Resolve the
symbol's address via gdbarch_iterate_over_objfiles_in_search_order
and minsym_lookup_iterator_cb.
|
|
* arch-utils.c (default_gdb_signal_from_target): Delete.
* arch-utils.h (default_gdb_signal_from_target): Delete.
* corelow.c (core_open) <signal mapping>: Extended comment. Check
gdbarch_gdb_signal_from_target_p.
* gdbarch.sh (gdb_signal_from_target): Make it an M method (with
predicate).
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
|
|
* gdbarch.sh (gdb_signal_from_target): Mention that the
implementation of the method must be host independent.
* gdbarch.h: Regenerate.
|
|
PR gdb/7205
* arch-utils.c (default_gdb_signal_to_host): Rename to ...
(default_gdb_signal_to_target): ... this. Add comment.
(default_gdb_signal_from_host): Rename to ...
(default_gdb_signal_from_target): ... this. Add comment.
* arch-utils.h (default_gdb_signal_to_host): Rename to ...
(default_gdb_signal_to_target): ... this.
(default_gdb_signal_from_host): Rename to ...
(default_gdb_signal_from_target): ... this.
* corelow.c (core_open): Adjust to naming change. Replace comment.
* gdbarch.sh (gdb_signal_from_host): Rename to ...
(gdb_signal_from_target): ... this. Adjust to
default_gdb_signal_from_host naming change. Extend comment.
(gdb_signal_to_host): Rename to ...
(gdb_signal_to_target): ... this. Adjust to
default_gdb_signal_to_host naming change.
* gdbarch.h, gdbarch.c: Renegerate.
|
|
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace target_signal with gdb_signal throughout.
|
|
* arch-utils.h (default_target_signal_to_host): Delete.
* arch-utils.c (default_target_signal_to_host): Delete.
* gdbarch.sh (target_signal_to_host): Remove.
* gdbarch.h, gdbarch.c: Regenerate.
|
|
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested. Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise. Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention. Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.
|
|
Tom Tromey <tromey@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (SFILES): Add `probe' and `stap-probe'.
(COMMON_OBS): Likewise.
(HFILES_NO_SRCDIR): Add `probe'.
* NEWS: Mention support for static and SystemTap probes.
* amd64-tdep.c (amd64_init_abi): Initializing proper fields used by
SystemTap probes' arguments parser.
* arm-linux-tdep.c: Including headers needed to perform the parsing
of SystemTap probes' arguments.
(arm_stap_is_single_operand): New function.
(arm_stap_parse_special_token): Likewise.
(arm_linux_init_abi): Initializing proper fields used by SystemTap
probes' arguments parser.
* ax-gdb.c (require_rvalue): Removing static declaration.
(gen_expr): Likewise.
* ax-gdb.h (gen_expr): Declaring function.
(require_rvalue): Likewise.
* breakpoint.c: Include `gdb_regex.h' and `probe.h'.
(bkpt_probe_breakpoint_ops): New variable.
(momentary_breakpoint_from_master): Set the `probe' value.
(add_location_to_breakpoint): Likewise.
(break_command_1): Using proper breakpoint_ops according to the
argument passed by the user in the command line.
(bkpt_probe_insert_location): New function.
(bkpt_probe_remove_location): Likewise.
(bkpt_probe_create_sals_from_address): Likewise.
(bkpt_probe_decode_linespec): Likewise.
(tracepoint_probe_create_sals_from_address): Likewise.
(tracepoint_probe_decode_linespec): Likewise.
(tracepoint_probe_breakpoint_ops): New variable.
(trace_command): Using proper breakpoint_ops according to the
argument passed by the user in the command line.
(initialize_breakpoint_ops): Initializing breakpoint_ops for
static probes on breakpoints and tracepoints.
* breakpoint.h (struct bp_location) <probe>: New field.
* cli-utils.c (skip_spaces_const): New function.
(extract_arg): Likewise.
* cli-utils.h (skip_spaces_const): Likewise.
(extract_arg): Likewise.
* coffread.c (coff_sym_fns): Add `sym_probe_fns' value.
* configure.ac: Append `stap-probe.o' to be generated when ELF
support is present.
* configure: Regenerate.
* dbxread.c (aout_sym_fns): Add `sym_probe_fns' value.
* elfread.c: Include `probe.h' and `arch-utils.h'.
(probe_key): New variable.
(elf_get_probes): New function.
(elf_get_probe_argument_count): Likewise.
(elf_evaluate_probe_argument): Likewise.
(elf_compile_to_ax): Likewise.
(elf_symfile_relocate_probe): Likewise.
(stap_probe_key_free): Likewise.
(elf_probe_fns): New variable.
(elf_sym_fns): Add `sym_probe_fns' value.
(elf_sym_fns_lazy_psyms): Likewise.
(elf_sym_fns_gdb_index): Likewise.
(_initialize_elfread): Initialize objfile cache for static
probes.
* gdb_vecs.h (struct probe): New forward declaration.
(probe_p): New VEC declaration.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (stap_integer_prefix): New variable.
(stap_integer_suffix): Likewise.
(stap_register_prefix): Likewise.
(stap_register_suffix): Likewise.
(stap_register_indirection_prefix): Likewise.
(stap_register_indirection_suffix): Likewise.
(stap_gdb_register_prefix): Likewise.
(stap_gdb_register_suffix): Likewise.
(stap_is_single_operand): New function.
(stap_parse_special_token): Likewise.
(struct stap_parse_info): Forward declaration.
* i386-tdep.c: Including headers needed to perform the parsing
of SystemTap probes' arguments.
(i386_stap_is_single_operand): New function.
(i386_stap_parse_special_token): Likewise.
(i386_elf_init_abi): Initializing proper fields used by SystemTap
probes' arguments parser.
* i386-tdep.h (i386_stap_is_single_operand): New function.
(i386_stap_parse_special_token): Likewise.
* machoread.c (macho_sym_fns): Add `sym_probe_fns' value.
* mipsread.c (ecoff_sym_fns): Likewise.
* objfiles.c (objfile_relocate1): Support relocation for static
probes.
* parse.c (prefixify_expression): Remove static declaration.
(initialize_expout): Likewise.
(reallocate_expout): Likewise.
* parser-defs.h (initialize_expout): Declare function.
(reallocate_expout): Likewise.
(prefixify_expression): Likewise.
* ppc-linux-tdep.c: Including headers needed to perform the parsing
of SystemTap probes' arguments.
(ppc_stap_is_single_operand): New function.
(ppc_stap_parse_special_token): Likewise.
(ppc_linux_init_abi): Initializing proper fields used by SystemTap
probes' arguments parser.
* probe.c: New file, for generic statically defined probe support.
* probe.h: Likewise.
* s390-tdep.c: Including headers needed to perform the parsing of
SystemTap probes' arguments.
(s390_stap_is_single_operand): New function.
(s390_gdbarch_init): Initializing proper fields used by SystemTap
probes' arguments parser.
* somread.c (som_sym_fns): Add `sym_probe_fns' value.
* stap-probe.c: New file, for SystemTap probe support.
* stap-probe.h: Likewise.
* symfile.h: Include `gdb_vecs.h'.
(struct sym_probe_fns): New struct.
(struct sym_fns) <sym_probe_fns>: New field.
* symtab.c (init_sal): Initialize `probe' field.
* symtab.h (struct probe): Forward declaration.
(struct symtab_and_line) <probe>: New field.
* tracepoint.c (start_tracing): Adjust semaphore on breakpoints
locations.
(stop_tracing): Likewise.
* xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.
|
|
and fields.name members from char * to const char *. All uses updated.
(struct cplus_struct_type): Change type of fn_fieldlists.name member
from char * to const char *. All uses updated.
(type_name_no_tag): Update.
(lookup_unsigned_typename, lookup_signed_typename): Update.
* gdbtypes.c (type_name_no_tag): Change result type
from char * to const char *. All callers updated.
(lookup_unsigned_typename, lookup_signed_typename): Change type of
name parameter from char * to const char *.
* symtab.h (struct cplus_specific): Change type of demangled_name
member from char * to const char *. All uses updated.
(struct general_symbol_info): Change type of name and
mangled_lang.demangled_name members from char * to const char *.
All uses updated.
(symbol_get_demangled_name, symbol_natural_name): Update.
(symbol_demangled_name, symbol_search_name): Update.
* symtab.c (symbol_get_demangled_name): Change result type
from char * to const char *. All callers updated.
(symbol_natural_name, symbol_demangled_name): Ditto.
(symbol_search_name): Ditto.
(completion_list_add_name): Change type of symname,sym_text,
text,word parameters from char * to const char *.
(completion_list_objc_symbol): Change type of sym_text,
text,word parameters from char * to const char *.
* ada-lang.c (find_struct_field): Change type of name parameter
from char * to const char *.
(encoded_ordered_before): Similarly for N0,N1 parameters.
(old_renaming_is_invisible): Similarly for function_name parameter.
(ada_type_name): Change result type from char * to const char *.
All callers updated.
* ada-lang.h (ada_type_name): Update.
* buildsym.c (hashname): Change type of name parameter
from char * to const char *.
* buildsym.h (hashname): Update.
* dbxread.c (end_psymtab): Change type of include_list parameter
from char ** to const char **.
* dwarf2read.c (determine_prefix): Change result type
from char * to const char *. All callers updated.
* f-lang.c (find_common_for_function): Change type of name, funcname
parameters from char * to const char *.
* f-lang.c (find_common_for_function): Update.
* f-valprint.c (list_all_visible_commons): Change type of funcname
parameters from char * to const char *.
* gdbarch.sh (static_transform_name): Change type of name parameter
and result from char * to const char *.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-sol2-tdep.c (i386_sol2_static_transform_name): Change type
of name parameter from char * to const char *.
* jv-lang.c (java_primitive_type_from_name): Ditto.
(java_demangled_signature_length): Similarly for signature parameter.
(java_demangled_signature_copy): Ditto.
(java_demangle_type_signature): Ditto.
* jv-lang.h (java_primitive_type_from_name): Update.
(java_demangle_type_signature): Update.
* objc-lang.c (specialcmp): Change type of a,b parameters
from char * to const char *.
* p-lang.c (is_pascal_string_type): Change type of arrayname parameter
from char * to const char *. All callers updated.
* p-lang.h (is_pascal_string_type): Update.
* solib-frv.c (find_canonical_descriptor_in_load_object): Change type
of name parameter from char * to const char *.
* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Ditto.
* utils.c (fprintf_symbol_filtered): Ditto.
* defs.h (fprintf_symbol_filtered): Update.
* sparc-tdep.h (sparc_sol2_static_transform_name): Update.
* stabsread.h (end_psymtab): Update.
* stack.c (find_frame_funname): Change type of funname parameter
from char ** to const char **.
* stack.h (find_frame_funname): Update.
* typeprint.c (type_print): Change type of varstring parameter
from char * to const char *.
* value.h (type_print): Update.
* xcoffread.c (xcoff_start_psymtab): Change type of filename parameter
from char * to const char *. All callers updated.
(xcoff_end_psymtab): Change type of include_list parameter
from char ** to const char **. All callers updated.
(swap_sym): Similarly for name parameter. All callers updated.
* coffread.c (patch_type): Add (char*) cast to xfree parameter.
Use xstrdup.
(process_coff_symbol): Use xstrdup.
* stabsread.c (stabs_method_name_from_physname): Renamed from
update_method_name_from_physname. Change result type from void
to char *. All callers updated.
(read_member_functions): In has_destructor case, store name in objfile
obstack instead of malloc space. In !has_stub case, fix mem leak.
|
|
"name" parameter to const char ** from char **. All callers updated.
(find_pc_partial_function): Ditto.
(cache_pc_function_name): Change type to const char * from char *.
* symtab.h ((find_pc_partial_function_gnu_ifunc): Update.
(find_pc_partial_function): Update.
* alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change
type of "name" parameter to const char * from char *.
All uses updated.
* arch-utils.c (generic_in_solib_return_trampoline): Change
type of "name" parameter to const char * from char *.
* arch-utils.h (generic_in_solib_return_trampoline): Update.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change
type of "name" parameter to const char * from char *.
* gdbarch.sh (in_solib_return_trampoline): Ditto.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update.
* m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change
type of "name" parameter to const char * from char *.
* skip.c (skip_function_pc): Ditto.
* sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto.
* sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update.
* sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto.
* sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto.
* sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto.
* sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto.
* sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto.
* nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name".
* nbsd-tdep.h (nbsd_pc_in_sigtramp): Update.
|
|
* gdbarch.c, gdbarch.h: Regenerate.
* gcore.c (gcore_memory_sections): Try gdbarch find_memory_regions
callback before falling back to target method.
* linux-nat.c (read_mapping, linux_nat_find_memory_regions): Remove.
(linux_target_install_ops): No longer install it.
* linux-tdep.c (linux_find_memory_regions): New function.
(linux_init_abi): Install it.
|
|
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes
before target_make_corefile_notes. If NULL is returned, the
target does not support core file generation.
* linux-nat.c: Include "linux-tdep.h".
(find_signalled_thread, find_stop_signal): Remove.
(linux_nat_do_thread_registers): Likewise.
(struct linux_nat_corefile_thread_data): Likewise.
(linux_nat_corefile_thread_callback): Likewise.
(iterate_over_spus): Likewise.
(struct linux_spu_corefile_data): Likewise.
(linux_spu_corefile_callback): Likewise.
(linux_spu_make_corefile_notes): Likewise.
(linux_nat_collect_thread_registers): New function.
(linux_nat_make_corefile_notes): Replace contents by call to
linux_make_corefile_notes passing linux_nat_collect_thread_registers
as native-only callback.
* linux-tdep.h: Include "bfd.h".
(struct regcache): Add forward declaration.
(linux_collect_thread_registers_ftype): New typedef.
(linux_make_corefile_notes): Add prototype.
* linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h",
"regset.h", and "elf-bfd.h".
(find_signalled_thread, find_stop_signal): New functions.
(linux_spu_make_corefile_notes): Likewise.
(linux_collect_thread_registers): Likewise.
(struct linux_corefile_thread_data): New data structure.
(linux_corefile_thread_callback): New funcion.
(linux_make_corefile_notes): Likewise.
(linux_make_corefile_notes_1): Likewise.
(linux_init_abi): Install it.
|
|
* gdbarch.c, gdbarch.h: Regenerate.
* infcmd.c (info_proc_cmd_1): Try gdbarch info_proc callback
before falling back to the target info_proc callback.
* linux-nat.c: Do not include "cli/cli-utils.h".
(linux_nat_info_proc): Remove.
(linux_target_install_ops): No longer install it.
* linux-tdep.c: Include "cli/cli-utils.h" and <ctype.h>.
(read_mapping): New function.
(linux_info_proc): Likewise.
(linux_init_abi): Install it.
|
|
* gdbarch.sh (max_insn_length): Extend the comment by unit.
* gdbarch.h: Regenerate.
|
|
Not sure why, but the version currently checked in as an extraneous
trailing whitespace that showed up as a diff when I reran gdbarch.sh.
gdb/ChangeLog:
* gdbarch.h: Regenerate.
|
|
* gdbarch.sh: New field 'long_long_align_bit'.
* gdbarch.c, gdbarch.h: Regenerate.
* i386-tdep.c (i386_gdbarch_init): Set long_long_align_bit to 32.
* jit.c (jit_read_code_entry): Use it to determine correct size offset.
|
|
* tracepoint.c (encode_actions_1): Add case for $_ret.
(validate_actionline): Check for $_ret.
(trace_dump_actions): Ditto.
* ax-gdb.h (gen_trace_for_return_address): Declare.
* ax-gdb.c: Include arch-utils.h.
(gen_trace_for_return_address): New function.
(agent_command): Add return address special case.
* amd64-tdep.c: Include ax.h and ax-gdb.h.
(amd64_gen_return_address): New function.
(amd64_init_abi): Call it.
* i386-tdep.c: Include ax.h and ax-gdb.h.
(i386_gen_return_address): New function.
(i386_init_abi): Call it.
* arch-utils.h (default_gen_return_address): Declare.
* arch-utils.c (default_gen_return_address): New function.
* gdbarch.sh (gen_return_address): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* gdb.texinfo (Tracepoint Action Lists): Document $_ret.
* gdb.trace/collection.exp: Test collection of $_ret.
|
|
* amd64-tdep.c (amd64_pseudo_register_read_value): Rename
from amd64_pseudo_register_read. Change arguments. Call
mark_value_bytes_unavailable when needed.
(amd64_init_abi): Use set_gdbarch_pseudo_register_read_value, not
set_gdbarch_pseudo_register_read.
* sentinel-frame.c (sentinel_frame_prev_register): Use
regcache_cooked_read_value.
* regcache.h (regcache_cooked_read_value): Declare.
* regcache.c (regcache_cooked_read_value): New function.
(regcache_cooked_read): Call
gdbarch_pseudo_register_read_value if available.
* i386-tdep.h (i386_pseudo_register_read_value): Declare.
(i386_pseudo_register_read): Remove.
* i386-tdep.c (i386_pseudo_register_read_into_value): Rename from
i386_pseudo_register_read. Change arguments. Call
mark_value_bytes_unavailable when needed.
(i386_pseudo_register_read_value): New function.
(i386_gdbarch_init): Call set_gdbarch_pseudo_register_read_value,
not set_gdbarch_pseudo_register_read.
* gdbarch.sh (pseudo_register_read_value): New method.
* gdbarch.c, gdbarch.h: Rebuild.
* findvar.c (value_from_register): Call get_frame_register_value.
gdb/testsuite
* gdb.dwarf2/typeddwarf.c: XFAIL 'z' on x86-64.
* gdb.dwarf2/typeddwarf.exp (xfail-gdb-test): Add arch_pattern
argument.
* gdb.dwarf2/typeddwarf-amd64.S: New file.
|
|
* dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes
returning that the register piece is unavailable/optimized out.
(write_pieced_value): Handle get_frame_register_bytes returning
that the register piece is unavailable/optimized out when doing a
read-modify write of a bitfield.
* findvar.c (value_from_register): Handle get_frame_register_bytes
returning that the register piece is unavailable/optimized out.
* frame.c (get_frame_register_bytes): New parameters `optimizedp'
and `unavailablep'. Throw error on bad debug info. Use
frame_register instead of frame_register_read, to fill in the new
arguments.
* frame.h (get_frame_register_bytes): New parameters `optimizedp'
and `unavailablep'.
* valops.c: (value_assign): Adjust, and handle
get_frame_register_bytes failing.
* spu-tdep.c: Include exceptions.h.
(spu_software_single_step): Adjust, and handle
get_frame_register_bytes failing.
(spu_get_longjmp_target): Ditto.
* gdbarch.sh (register_to_value): Change to return int. New
parameters `optimizedp' and `unavailablep'.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.c (i386_register_to_value): Adjust to new
gdbarch_register_to_value interface.
* i387-tdep.c (i387_register_to_value): Ditto.
* i387-tdep.h (i387_register_to_value): Ditto.
* alpha-tdep.c (alpha_register_to_value): Ditto.
* ia64-tdep.c (ia64_register_to_value): Ditto.
* m68k-tdep.c (m68k_register_to_value): Ditto.
* mips-tdep.c (mips_register_to_value): Ditto.
* rs6000-tdep.c (rs6000_register_to_value): Ditto.
|
|
* regcache.h (regcache_raw_read, regcache_raw_read_signed)
(regcache_raw_read_unsigned, regcache_raw_read_signed)
(regcache_raw_read_unsigned, regcache_raw_read_part)
(regcache_cooked_read, regcache_cooked_read_signed)
(regcache_cooked_read_unsigned, regcache_cooked_read_part)
(regcache_cooked_read_ftype): Change return to enum
register_status.
* regcache.c: Include exceptions.h
(regcache_save): Adjust to handle REG_UNAVAILABLE registers.
(do_cooked_read): Change return to enum register_status. Always
forward to regcache_cooked_read.
(regcache_raw_read): Change return to enum register_status. If
the register is not REG_VALID, memset the buffer. Return the
register's status.
(regcache_raw_read_signed): Handle non-REG_VALID registers and
return the register's status.
(regcache_raw_read_unsigned): Ditto.
(regcache_cooked_read): Change return to enum register_status.
Assert that with read-only regcaches, the register's status must
be known. If the regcache is read-only, and the register is not
REG_VALID, memset the buffer. Return the register's status.
(regcache_cooked_read_signed): Change return to enum
register_status. Handle non-REG_VALID registers and return the
register's status.
(regcache_cooked_read_unsigned): Change return to enum
register_status. Handle non-REG_VALID registers and return the
register's status.
(regcache_xfer_part, regcache_raw_read_part)
(regcache_cooked_read_part): Change return to enum
register_status. Return the register's status.
(regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
unavailable.
(regcache_dump): Handle unavailable cooked registers.
* frame.c (do_frame_register_read): Adjust interface to match
regcache_cooked_read_ftype.
* gdbarch.sh (pseudo_register_read): Change return to enum
register_status.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.h (i386_pseudo_register_read): Change return to enum
register_status.
* i386-tdep.c (i386_pseudo_register_read): Change return to enum
register_status. If reading a raw register indicates the raw
register is not valid, return the raw register's status,
otherwise, return REG_VALID.
* amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
register_status. Handle non-REG_VALID raw registers and return
the register's status.
* arm-tdep.c (arm_neon_quad_read)
(arm_pseudo_read): Change return to enum register_status. Handle
non-REG_VALID raw registers and return the register's status.
* avr-tdep.c (avr_pseudo_register_read): Ditto.
* frv-tdep.c (frv_pseudo_register_read): Ditto.
* h8300-tdep.c (h8300_pseudo_register_read): Ditto.
* hppa-tdep.c (hppa_pseudo_register_read): Ditto.
* m32c-tdep.c (m32c_move_reg_t): Change return to enum
register_status.
(m32c_raw_read, m32c_raw_write, m32c_banked_read)
(m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
(m32c_part_write, m32c_cat_read, m32c_cat_write)
(m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
(m32c_pseudo_register_read): Change return to enum
register_status. Adjust.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
enum register_status. Return the register's status.
* mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
register_status. Return the register's status.
(mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
* mips-tdep.c (mips_pseudo_register_read): Ditto.
* mt-tdep.c (mt_pseudo_register_read): Ditto.
* rs6000-tdep.c (move_ev_register_func): New typedef.
(e500_move_ev_register): Use it. Change return to enum
register_status. Return the register's status.
(do_regcache_raw_read): New function.
(do_regcache_raw_write): New function.
(e500_pseudo_register_read): Change return to enum
register_status. Return the register's status. Use
do_regcache_raw_read.
(e500_pseudo_register_write): Adjust. Use do_regcache_raw_write.
(dfp_pseudo_register_read): Change return to enum register_status.
Return the register's status.
(vsx_pseudo_register_read): Ditto.
(efpr_pseudo_register_read): Ditto.
(rs6000_pseudo_register_read): Ditto.
* s390-tdep.c (s390_pseudo_register_read): Change return to enum
register_status. Return the register's status.
* sh64-tdep.c (pseudo_register_read_portions): New function.
(sh64_pseudo_register_read): Change return to enum
register_status. Use pseudo_register_read_portions. Return the
register's status.
* ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
register_status. Return the register's status.
* sh-tdep.c (pseudo_register_read_portions): New function.
(sh_pseudo_register_read): Change return to enum register_status.
Use pseudo_register_read_portions. Return the register's status.
* sparc-tdep.c (sparc32_pseudo_register_read): Change return to
enum register_status. Return the register's status.
* sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
* spu-tdep.c (spu_pseudo_register_read_spu)
(spu_pseudo_register_read): Ditto.
* xtensa-tdep.c (xtensa_register_read_masked)
(xtensa_pseudo_register_read): Ditto.
* bfin-tdep.c (bfin_pseudo_register_read): Ditto.
|
|
* ada-lang.c: Comment cleanup, mostly periods and spaces.
* ada-lang.h: Ditto.
* ada-tasks.c: Ditto.
* ada-valprint.c: Ditto.
* aix-threads.c: Ditto.
* alpha-linux-nat.c: Ditto.
* alpha-linux-tdep.c: Ditto.
* alpha-mdebug-tdep.c: Ditto.
* alpha-nat.c: Ditto.
* alpha-osf1-tdep.c: Ditto.
* alpha-tdep.c: Ditto.
* alphabsd-nat.c: Ditto.
* alphabsd-tdep.c: Ditto.
* amd64-darwin-tdep.c: Ditto.
* amd64-linux-nat.c: Ditto.
* amd64-linux-tdep.c: Ditto.
* amd64-sol2-tdep.c: Ditto.
* amd64-tdep.c: Ditto.
* amd64-fbsd-tdep.c: Ditto.
* amd64-nbsd-tdep.c: Ditto.
* amd64-obsd-tdep.c: Ditto.
* amd64-linux-nat.c: Ditto.
* amd64-linux-tdep.c: Ditto.
* arm-tdep.c: Ditto.
* arm-tdep.h: Ditto.
* armnbsd-nat.c: Ditto.
* avr-tdep.c: Ditto.
* bfin-tdep.c: Ditto.
* bsd-kvm.c: Ditto.
* c-typeprintc: Ditto.
* c-valprint.c: Ditto.
* coff-pe-read.h: Ditto.
* coffreead.c: Ditto.
* cris-tdep.c: Ditto.
* d-lang.c: Ditto.
* darwin-nat-info.c: Ditto.
* darwin-nat.c: Ditto.
* dbug-rom.c: Ditto.
* dbxread.c: Ditto.
* dcache.c: Ditto.
* dcache.h: Ditto.
* dec-thread.c: Ditto.
* defs.h: Ditto.
* demangle.c: Ditto.
* dicos-tdep.c: Ditto.
* dictionary.c: Ditto.
* dictionary.h: Ditto.
* dink32-rom.c: Ditto.
* disasm.c: Ditto.
* doublest.c: Ditto.
* dsrec.c: Ditto.
* dummy-frame.c: Ditto.
* dwarf2-frame.c: Ditto.
* dwarf2expr.c: Ditto.
* dwarf2loc.c: Ditto.
* dwarf2read.c: Ditto.
* elfread.c: Ditto.
* environ.c: Ditto.
* eval.c: Ditto.
* event-top.h: Ditto.
* exceptions.c: Ditto.
* exceptions.h: Ditto.
* exec.c: Ditto.
* expprint.c: Ditto.
* expression.h: Ditto.
* f-exp.y: Ditto.
* f-lang.c: Ditto.
* f-lang.h: Ditto.
* f-typeprint.c: Ditto.
* f-valprint.c: Ditto.
* fbsd-nat.c: Ditto.
* findvar.c: Ditto.
* fork-child.c: Ditto.
* frame.c: Ditto.
* frame.h: Ditto.
* frv-linux-tdep.c: Ditto.
* frv-tdep.c: Ditto.
* gcore.c: Ditto.
* gdb-stabs.h: Ditto.
* gdb_assert.h: Ditto.
* gdb_string.h: Ditto.
* gdb_thread_db.h: Ditto.
* gdb_wait.h: Ditto.
* gdbarch.sh: Ditto.
* gdbcore.h: Ditto.
* gdbthread.h: Ditto.
* gdbtypes.c: Ditto.
* gdbtypes.h: Ditto.
* gnu-nat.c: Ditto.
* gnu-nat.h: Ditto.
* gnu-v2-abi.c: Ditto.
* gnu-v3-abi.c: Ditto.
* go32-nat.c: Ditto.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
|
|
* gdbarch.sh (ax_pseudo_register_collect,
ax_pseudo_register_push_stack): new callbacks.
(agent_expr): Forward declare.
* gdbarch.h, gdbarch.c: Regenerate.
* ax-gdb.c (gen_expr): Remove pseudo-register check code.
* ax-general.c (user-regs.h): New include.
(ax_reg): Call gdbarch_ax_pseudo_register_push_stack.
(ax_reg_mask): Call gdbarch_ax_pseudo_register_collect.
* mips-tdep.c (ax.h): New include.
(mips_ax_pseudo_register_collect,
mips_ax_pseudo_register_push_stack): New functions.
(mips_gdbarch_init): Set mips_ax_pseudo_register_collect and
mips_ax_pseudo_register_push_stack.
|
|
PR corefile/8210
bfd/
* bfd-in2.h: Regenerate.
* corefile.c (bfd_core_file_pid): New.
* targets.c (BFD_JUMP_TABLE_CORE): Add NAME##_core_file_pid.
(struct bfd_target) <_core_file_pid>: New.
* libbfd-in.h (_bfd_nocore_core_file_pid): Declare.
* libbfd.c (_bfd_nocore_core_file_pid): New.
* elf-bfd.h (bfd_elf32_core_file_pid, bfd_elf64_core_file_pid):
Declare.
* elfcode.h (elf_core_file_pid): New define.
* elfcore.h (elf_core_file_pid): New function.
* elf.c (elfcore_make_pid): Rewrite.
(elfcore_grok_prstatus): Only set core_pid if not set yet.
(elfcore_grok_prstatus) [!HAVE_PRSTATUS_T_PR_WHO]: Fallback to
getting the lwpid from prstat.pr_pid.
* elf64-x86-64.c (elf64_x86_64_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
(elf64_x86_64_grok_psinfo): Extract the the main process's PID,
and store it in elf_tdata's core_pid field.
* elf32-i386.c (elf_i386_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
(elf_i386_grok_psinfo): Extract the the main process's PID, and
store it in elf_tdata's core_pid field.
* elf32-am33lin.c (elf32_am33lin_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-arm.c (elf32_arm_nabi_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-cris.c (cris_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-frv.c (elf32_frv_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-hppa.c (elf32_hppa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-mips.c (elf32_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-ppc.c (ppc_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-s390.c (elf_s390_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-score.c (s3_bfd_score_elf_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-score7.c (s7_bfd_score_elf_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-sh.c (elf32_shlin_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-xtensa.c (elf_xtensa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-hppa.c (elf64_hppa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-mips.c (elf64_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-ppc.c (ppc64_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elfn32-mips.c (elf32_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* plugin.c (bfd_plugin_core_file_pid): New function.
* aout-target.h (MY_core_file_pid): Define.
* aout-tic30.c (MY_core_file_pid, MY_core_file_p): New defines.
* coff-rs6000.c (coff_core_file_pid): New define.
(rs6000coff_vec, pmac_xcoff_vec): Use BFD_JUMP_TABLE_CORE.
* coff64-rs6000.c (coff_core_file_pid): New define.
(rs6000coff64_vec): Use BFD_JUMP_TABLE_CORE.
(xcoff64_core_file_pid): New define.
(aix5coff64_vec): Use BFD_JUMP_TABLE_CORE.
* mach-o-target.c (bfd_mach_o_core_file_pid): New define.
* aix386-core.c (aix386_core_file_pid): New define.
* hppabsd-core.c (hppabsd_core_core_file_pid): New define.
* hpux-core.c (hpux_core_core_file_pid): New define.
* irix-core.c (irix_core_core_file_pid): New define.
* lynx-core.c (lynx_core_file_pid): New define.
* osf-core.c (osf_core_core_file_pid): New define.
* ptrace-core.c (ptrace_unix_core_file_pid): New define.
* sco5-core.c (sco5_core_file_pid): New define.
* xcoff-target.h (coff_core_file_pid): New define.
* netbsd-core.c (netbsd_core_core_file_pid): New define.
gdb/
2010-08-18 Pedro Alves <pedro@codesourcery.com>
PR corefile/8210
gdb/
* corelow.c (add_to_thread_list): Don't use
gdbarch_core_reg_section_encodes_pid. Use bfd_core_file_pid.
(get_core_register_section): Don't use
gdbarch_core_reg_section_encodes_pid.
* gdbarch.sh (core_reg_section_encodes_pid): Delete.
* gdbarch.h, gdbarch.c: Regenerate.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Don't set
gdbarch_core_reg_section_encodes_pid.
* i386-sol2-tdep.c (i386_sol2_init_abi): Ditto.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Ditto.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Ditto.
|
|
Throughout, call read_encoded_value with ptr_size rather than addr_size.
(decode_frame_entry_1): Remove redundant setting of
addr_size. Call gdbarch_dwarf2_addr_size rather than gdbarch_ptr_bit
to determine addr_size in Dwarf versions < 4. Set ptr_size dependent
on examined frame section. Add comment to explain why.
* gdbarch.sh (dwarf2_addr_size): Define as variable. Add lengthy
comment to explain usage.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Set dwarf2_addr_size to 4.
|
|
Make core files the process_stratum.
* corefile.c (core_target): New variable.
(core_file_command): Remove variable t, use core_target.
* corelow.c (core_ops): Make it static.
(init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
* defs.h (make_cleanup_unpush_target): New prototype.
* gdbarch.h: Regenerate.
* gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
* gdbcore.h (core_target): New declaration.
* inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
variables ops_already_pushed and back_to. Use push_target,
make_cleanup_unpush_target and discard_cleanups calls.
* record.c (record_open): Replace core_stratum by a core_bfd check.
* target.c (target_is_pushed): New function.
(find_core_target): Remove.
* target.h (enum strata) <core_stratum>: Remove.
(target_is_pushed): New declaration.
(find_core_target): Remove declaration.
* tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
* utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
gdb/doc/
Make core files the process_stratum.
* gdb.texinfo (Active Targets): Remove core_stratum. Include
record_stratum example.
gdb/testsuite/
Make core files the process_stratum.
* gdb.base/corefile.exp (run: load core again)
(run: sanity check we see the core file, run: with core)
(run: core file is cleared, attach: load core again)
(attach: sanity check we see the core file, attach: with core)
(attach: core file is cleared): New tests.
* gdb.base/coremaker.c (main): New parameters. Implement "sleep" argv.
|
|
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* floatformat.h (floatformat_ieee_half_big): Add declaration.
(floatformat_ieee_half_little): Likewise.
libiberty/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* floatformat.c (floatformat_ieee_half_big): New variable.
(floatformat_ieee_half_little): Likewise.
gdb/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* gdbtypes.h (floatformats_ieee_half): Add declaration.
* gdbtypes.c (floatformats_ieee_half): New variable.
* doublest.c (floatformat_from_length): Set format to
gdbarch_half_format if length matches.
* gdbarch.sh (half_bit): New architecture method.
(half_format): Likewise.
* gdbarch.h: Regenerate.
* gdbarch.c: Likewise.
|
|
2010-05-26 Pedro Alves <pedro@codesourcery.com>
* NEWS: Mention the `qRelocInsn' feature.
* gdbarch.sh (relocate_instruction): New.
* amd64-tdep.c (rip_relative_offset): New.
(append_insns): New.
(amd64_relocate_instruction): New.
(amd64_init_abi): Install it.
* i386-tdep.c (append_insns): New.
(i386_relocate_instruction): New.
(i386_gdbarch_init): Install it.
* remote.c (remote_get_noisy_reply): Handle qRelocInsn requests.
* gdbarch.h, gdbarch.c: Regenerate.
gdb/doc/
2010-05-26 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (General Query Packets) <qSupported>: Describe the
`qRelocInsn' feature.
(Relocate instruction reply packet): New subsection
of `Tracepoint Packets'.
(Tracepoint Packets): Mention that packets QTDP and QTStart
support the qRelocInsn request, and add cross reference to new
subsection.
|
|
* gdbarch.h, gdbarch.c: Regenerate.
* remote.c (remote_query_supported): Remove use of
gdbarch_qsupported.
|
|
* gdbarch.h (gdbarch_has_dos_based_file_system): Update comment.
|
|
* filesystem.h, filesystem.c: New files.
* Makefile.in (SFILES): Add filesystem.c.
(COMMON_OBS): Add filesystem.o.
* solib.c (solib_find): Handle DOS-based filesystems. Handle
different target and host path flavours.
* arm-symbian-tdep.c (arm_symbian_init_abi): Set
has_dos_based_file_system on the gdbarch.
* arm-wince-tdep.c (arm_wince_init_abi): Ditto.
* i386-cygwin-tdep.c (i386_cygwin_init_abi): Ditto.
* i386-tdep.c (i386_go32_init_abi): Ditto.
* gdbarch.sh (has_dos_based_file_system): New.
* gdbarch.h, gdbarch.c: Regenerate.
* NEWS: Mention improved support for remote targets with DOS-based
filesystems. Mention new `set/show target-file-system-kind'
commands.
gdb/doc/
* gdb.texinfo (Commands to specify files): Describe what how GDB
looks up DOS-based filesystem paths on the system root. Document
the new `set/show target-file-system-kind' commands.
|
|
solib_symbols_extension is set in the target gdbarch.
* arm-symbian-tdep.c (arm_symbian_init_abi): Set
solib_symbols_extension to "sym".
* gdbarch.sh (solib_symbols_extension): New variable.
(pstring): New function.
* gdbarch.h, gdbarch.c: Regenerate.
|
|
2010-03-05 Corinna Vinschen <vinschen@redhat.com>
Tom Tromey <tromey@redhat.com>
* utils.c (host_char_to_target): Add 'gdbarch' argument.
(parse_escape): Likewise.
* python/py-utils.c (unicode_to_target_string): Update.
(unicode_to_target_python_string): Update.
(target_string_to_unicode): Update.
* printcmd.c (printf_command): Update.
* p-exp.y (yylex): Update.
* objc-exp.y (yylex): Update.
* mi/mi-parse.c: Include charset.h.
(mi_parse_escape): New function.
(mi_parse_argv): Use it.
* jv-exp.y (yylex): Update.
* i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New
function.
(i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset.
* gdbarch.sh (auto_charset, auto_wide_charset): New.
* gdbarch.c: Rebuild.
* gdbarch.h: Rebuild.
* defs.h (parse_escape): Update.
* cli/cli-setshow.c: Include arch-utils.h.
(do_setshow_command): Update.
* cli/cli-cmds.c (echo_command): Update.
* charset.h (target_charset, target_wide_charset): Update.
* charset.c: Include arch-utils.h.
(target_charset_name): Default to "auto".
(target_wide_charset_name): Likewise.
(show_target_charset_name): Handle "auto".
(show_target_wide_charset_name): Likewise.
(be_le_arch): New global.
(set_be_le_names): Add 'gdbarch' argument.
(validate): Likewise. Don't call set_be_le_names.
(set_charset_sfunc, set_host_charset_sfunc)
(set_target_charset_sfunc, set_target_wide_charset_sfunc):
Update.
(target_charset): Add 'gdbarch' argument.
(target_wide_charset): Likewise. Remove 'byte_order' argument.
(auto_target_charset_name): New global.
(default_auto_charset, default_auto_wide_charset): New functions.
(_initialize_charset): Set auto_target_charset_name. Allow "auto"
for target charsets. Copy result of nl_langinfo. Use GetACP if
USE_WIN32API.
* c-lang.c (charset_for_string_type): Add 'gdbarch' argument,
remove 'byte_order' argument. Update.
(classify_type): Likewise.
(c_emit_char): Update.
(c_printchar): Update.
(c_printstr): Update.
(c_get_string): Update.
(evaluate_subexp_c): Update.
* arch-utils.h (default_auto_charset, default_auto_wide_charset):
Declare.
* python/python.c (gdbpy_target_charset): New function.
(gdbpy_target_wide_charset): Likewise.
(GdbMethods): Update.
* NEWS: Update.
gdb/doc
* gdb.texinfo (Basic Python): Document target_charset and
target_wide_charset.
gdb/testsuite
* gdb.python/py-prettyprint.py (pp_nullstr.to_string): Use
gdb.target_charset.
(pp_ns.to_string): Likewise.
|
|
2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
* gdbarch.sh: Add qsupported.
* gdbarch.c: Regenerated.
* gdbarch.h: Likewise.
* remote.c (remote_state): Add gdbarch.
(init_remote_state): Set gdbarch.
(remote_query_supported): Support gdbarch_qsupported.
|
|
* arch-utils.h (default_remote_breakpoint_from_pc): Declare.
* gdbarch.c, gdbarch.h: Regenerated.
* gdbarch.sh (remote_breakpoint_from_pc): New architecture method.
* remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use
gdbarch_remote_breakpoint_from_pc.
doc/
* gdb.texinfo (Architecture-Specific Protocol Details): New section.
Document ARM breakpoint types.
(Register Packet Format): Move into the new section.
(Packets): Describe the KIND argument for Z0, z0, Z1, and z1 packets.
|
|
* arch-utils.h (default_fast_tracepoint_valid_at): Declare.
* arch-utils.c (default_fast_tracepoint_valid_at): New function.
* breakpoint.h (enum bptype): Add bp_fast_tracepoint.
* breakpoint.c (tracepoint_type): New function.
(ALL_TRACEPOINTS): Use it.
(should_be_inserted): Ditto.
(bpstat_check_location): Ditto.
(print_one_breakpoint_location): Ditto.
(user_settable_breakpoint): Ditto.
(set_breakpoint_location_function): Ditto.
(disable_breakpoints_in_shlibs): Ditto.
(delete_trace_command): Ditto.
(print_it_typical): Add bp_fast_tracepoint case.
(bpstat_what): Ditto.
(print_one_breakpoint_location): Ditto.
(allocate_bp_location): Ditto.
(mention): Ditto.
(breakpoint_re_set_one): Ditto.
(disable_command): Ditto.
(enable_command): Ditto.
(check_fast_tracepoint_sals): New function.
(break_command_really): Call it.
(ftrace_command): New function.
(_initialize_breakpoint): Add ftrace command.
* gdbarch.sh (fast_tracepoint_valid_at): New.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.c (i386_fast_tracepoint_valid_at): New function.
(i386_gdbarch_init): Use it.
* remote.c (struct remote_state): New field fast_tracepoints.
(PACKET_FastTracepoints): New packet config type.
(remote_fast_tracepoint_feature): New function.
(remote_protocol_features): Add FastTracepoints.
(remote_supports_fast_tracepoints): New function.
(_initialize_remote): Add FastTracepoints.
* tracepoint.c (download_tracepoint): Add fast tracepoint option.
* NEWS: Mention fast tracepoints.
* gdb.texinfo (Create and Delete Tracepoints): Describe fast
tracepoints.
(Tracepoint Packets): Describe remote protocol for fast
tracepoints.
* gdb.trace/tracecmd.exp: Test ftrace.
|
|
* darwin-nat-info.c: Update copyright.
* dbxread.c: Ditto.
* gdbarch.sh: Ditto.
* gdbarch.c: Ditto.
* gdbarch.h: Ditto.
* inline-frame.c: Ditto.
* inline-frame.h: Ditto.
|
|
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
|
|
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (default_displaced_step_hw_singlestep): New function.
* arch-utils.h (default_displaced_step_hw_singlestep): Add prototype.
* ppc-linux-tdep.c (ppc_displaced_step_hw_singlestep): New function.
(rs6000_gdbarch_init): Install it.
* infrun.c (displaced_step_fixup): Use new callback to determine
whether to "step" or "continue" displaced copy.
(resume): Likewise. Do not call maybe_software_singlestep
for displaced stepping.
(maybe_software_singlestep): Do not handle displaced stepping.
|
