aboutsummaryrefslogtreecommitdiff
path: root/gdb/gdbarch.c
AgeCommit message (Collapse)AuthorFilesLines
2001-01-22 * gdbarch.sh (PARM_BOUNDARY): Define.Nicholas Duffek1-0/+27
* gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2000-12-15Multi-arch REGISTER_BYTES_OK.Andrew Cagney1-1/+40
2000-12-15Replace free() with xfree().Kevin Buettner1-1/+1
2000-12-04Multiarch STAB_REG_TO_REGNUM, ECOFF_REG_TO_REGNUM,Andrew Cagney1-0/+170
DWARF_REG_TO_REGNUM, SDB_REG_TO_REGNUM, DWARF2_REG_TO_REGNUM.
2000-11-30Regenerate gdbarch.c.Andrew Cagney1-17/+17
2000-10-30* gdbarch.sh, hp-psymtab-read.c, hpread.c, m3-nat.c, mcore-tdep.c,J.T. Conklin1-2/+2
mips-tdep.c, monitor.c, regcache.c, remote-es.c, ser-unix.c, somread.c, tracepoint.c: Fix spelling errors in comments. * gdbarch.c: Regenerate. * gnu-nat.c (S_exception_raise_request): Fix typos and spelling errors in strings. * m3-nat.c (intercept_exec_calls, mach_thread_parse_id): Likewise. * mcore-tdep.c (mcore_analyze_prologue): Likewise. * mips-tdep.c (mips16_next_pc, _initialize_mips_tdep): Likewise. * remote-e7000.c (e7000_start_remote): Likewise. * remote-rdp.c (handle_swi): Likewise. * remote-vx.c (vx_load_command): Likewise. * sh-tdep.c (sh_do_pseudo_register): Likewise. * sol-thread.c (td_err_string): Likewise. * symtab.c (decode_line_2): Likewise. -------------------------------------------------------------------
2000-10-27* arch-utils.c (set_architecture, set_architecture_from_arch_mach,J.T. Conklin1-1/+1
set_gdbarch_from_file): Fix spelling error. * v850-tdep.c (v850_target_architecture_hook): Likewise. * gdbarch.sh: Fix spelling errors in comment. * gdbarch.c, gdbarch.h: Regenerate. * ppcnbsd-nat.c (fetch_core_registers, fetch_inferior_registers, store_inferior_registers): Support older NetBSD/powerpc systems from before fp reg support was added. Adapt to register number changes caused when powerpc target was multi-arched.
2000-10-27Corrected spelling errors in comments.David Anderson1-1/+1
gdbarch.{c,sh} removed a word from a comment.
2000-10-26 * arch-utils.c, arch-utils.h (default_convert_from_func_ptr_addr):Peter Schauer1-0/+34
New function. * gdbarch.sh (CONVERT_FROM_FUNC_PTR_ADDR): Add. * gdbarch.c, gdbarch.h: Regenerate. * valops.c (find_function_addr): Use CONVERT_FROM_FUNC_PTR_ADDR unconditionally. * config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Delete definition. * config/powerpc/tm-linux.h (CONVERT_FROM_FUNC_PTR_ADDR): Remove undef. * rs6000-tdep.c (rs6000_convert_from_func_ptr_addr): Fix comment. (rs6000_gdbarch_init): Register rs6000_convert_from_func_ptr_addr if not ELFOSABI_LINUX.
2000-09-01Corrected spelling error in comment: swaped -> swapped.David Anderson1-1/+1
2000-08-25Fri Aug 25 12:11:21 2000 David Taylor <taylor@texas.cygnus.com>David Taylor1-2/+33
* symtab.c (search_symbols): Fix off by one error in index for initializing variables ourtype, ourtype2, ourtype3, and ourtype4. (symtab_symbol_info): fix similar off by one error. Fri Aug 25 12:03:15 2000 David Taylor <taylor@texas.cygnus.com> * gdbarch.sh (TARGET_ADDR_BIT): New macro for the number of bits in gdb's representation of a target address. * gdbarch.c, gdbarch.h: Regenerated. * gdbtypes.c (build_gdbtypes): Use TARGET_ADDR_BIT instead of TARGET_PTR_BIT when initializing builtin_type_CORE_ADDR. * printcmd.c (print_address_numeric): Use TARGET_ADDR_BIT instead of TARGET_PTR_BIT, because we're printing an address, not a pointer.
2000-08-11 * regcache.c (TARGET_WRITE_PC, TARGET_READ_PC, TARGET_READ_FP,Andrew Cagney1-18/+12
TARGET_WRITE_FP, TARGET_READ_SP, TARGET_WRITE_SP): Move initialization from here. * gdbarch.sh: To here. * gdbarch.h, gdbarch.c: Regenerate.
2000-08-11Move TARGET_*_PTR to gdbarch.h.Andrew Cagney1-96/+80
2000-08-11Rename gdbarch_update() to gdbarch_update_p()Andrew Cagney1-1/+1
2000-08-04Missing GDBARCH updates for EXTRA_STACK_ALIGNMENT needed.Andrew Cagney1-0/+30
2000-08-02* gdbarch.sh: Add print_p field for CALL_DUMMY_BREAKPINT_OFFSETJimmy Guo1-3/+4
to be printed only if CALL_DUMMY_BREAKPOINT_OFFSET_P. * gdbarch.c: Regenerated.
2000-08-02Multi-arch REGISTER_SIM_REGNO. Update d10v.Andrew Cagney1-3/+36
2000-08-012000-08-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>Elena Zannoni1-2/+38
* gdbarch.sh: Multiarch DO_REGISTERS_INFO macro. * gdbarch.h, gdbarch.c: Regenerate. * infcmd.c (do_registers_info): Make not static and unconditionalize. * inferior.h (do_registers_info): Export.
2000-07-30Protoization.Kevin Buettner1-3/+2
2000-07-27Move GDB_MULTI_ARCH selection to configure*. Makes tm.h optional.Andrew Cagney1-1/+1
2000-07-242000-07-24 Elena Zannoni <ezannoni@kwikemart.cygnus.com>Elena Zannoni1-0/+68
* gdbarch.sh: Add FETCH_PSEUDO_REGISTER and STORE_PSEUDO_REGISTER to the gdbarch structure. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * inferior.h (FETCH_PSEUDO_REGISTER, STORE_PSEUDO_REGISTER): Delete macros. * regcache.c (write_register, read_register, write_register_bytes, write_register_gen, read_register_bytes, read_register_gen): Rename ARCH_FECTH_PSEUDO_REGISTERS to FETCH_PSEUDO_REGISTERS and ARCH_STORE_PSEUDO_REGISTER to STORE_PSEUDO_REGISTER.
2000-07-24 * gdbarch.sh: Add NUM_PSEUDO_REGS to the gdbarch structure.Elena Zannoni1-0/+29
* gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * inferior.h (NUM_PSEUDO_REGS): Delete macro.
2000-06-12Don't try to dump void macros (when non multi-arch). They couldAndrew Cagney1-17/+34
contain C statements.
2000-06-10Re-implement gdbach_dump() so that it prints out the macro values.Andrew Cagney1-338/+981
Add ``maint print arch'' command. Add ``gdbarch_register()'' function that also takes gdbarch_dump_tdep(). Use in mips-tdep.c.
2000-06-07The attatched moves the remaining guff from gdbarch.{h,c,sh} toAndrew Cagney1-408/+45
arch-utils.{h,c}. The ``set architecutre'' and ``set endian'' commands (part of the move) were implemented to use add_set_enum_cmd() so that ``set architecture <tab>'' works.
2000-06-06Move generic_register_convertible_not and frame_num_args_unknown fromAndrew Cagney1-18/+0
gdbarch.* to arch-utils.*.
2000-06-04Add host_pointer_to_address() and address_to_host_pointer(). AddAndrew Cagney1-4/+4
signed_pointer_to_address() etc. Rename generic_pointer_to_address() to unsigned_pointer_to_address() etc.
2000-06-02Multiarch TARGET_FLOAT_FORMAT, TARGET_DOUBLE_FORMAT,Andrew Cagney1-0/+73
TARGET_LONG_DOUBLE_FORMAT. Update d10v.
2000-05-15Convert SAVE_DUMMY_FRAME_TOS to multi-arch.Andrew Cagney1-0/+32
2000-05-11Only try to print a macro when it is defined (in gdbarch_dump).Andrew Cagney1-0/+189
2000-05-102000-05-08 Michael Snyder <msnyder@seadog.cygnus.com>Michael Snyder1-0/+23
* gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers. * gdbarch.c, gdbarch.h: Regenerate. * core-regset.c: Change FP0_REGNUM to a runtime test. * procfs.c: Ditto. * sun3-nat.c: Ditto. * sparc-tdep.c: Ditto. * i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM. * ptx4-nat.c: Ditto. * sol-thread.c (sol_thread_create_inferior): only add the thread to the thread list if it is not already in there. (prototypes for thread_db func ptrs): pretty up formatting.
2000-05-02Multi-arch NPC_REGNUM NNPC_REGNUM.Andrew Cagney1-0/+46
2000-05-02re-do how gdbarch provides non-multi arch defaults so that non-Andrew Cagney1-36/+0
multi-arch gdbservers can continue to compile.
2000-04-29Convert SKIP_PROLOGUE_FRAMELESS_P into PROLOGUE_FRAMELESS_P.Andrew Cagney1-0/+27
2000-04-282000-04-27 Michael Snyder <msnyder@seadog.cygnus.com>Michael Snyder1-12/+4
* gdbarch.sh (d10v_daddr_p, d10v_iaddr_p, d10v_convert_daddr_to_raw, d10v_convert_iaddr_to_raw): make these multi-arch functions optional. * gdbarch.c, gdbarch.h: regenerate
2000-04-22Convert REG_STRUCT_HAS_ADDR to multi-arch. Use REG_STRUCT_HAS_ADDR_PAndrew Cagney1-0/+30
in conversion.
2000-04-21* valops.c (hand_function_call): Replace #ifdef STACK_ALIGN withAndrew Cagney1-0/+30
run-time test for STACK_ALIGN_P. * gdbarch.sh: Add support for function and variable predicates. (STACK_ALIGN): Add. Implement with predicate - STACK_ALIGN_P. * gdbarch.h, gdbarch.c: Re-generate.
2000-04-20* gdbarch.sh: Make multi-arch variable defaults, defaults for non-Andrew Cagney1-10/+6
multi-arch targets. (TARGET_BFD_VMA_BIT, IEEE_FLOAT, CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS): Update. * inferior.h (CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS): Default provided by gdbarch. (CALL_DUMMY_P): Add FIXME. gdbarch should provide default. * valprint.c (IEEE_FLOAT): Default provided by gdbarch.
2000-04-19Bring RETURN_VALUE_ON_STACK under gdbarch's control.Jim Blandy1-0/+27
* gdbarch.sh (RETURN_VALUE_ON_STACK): New entry. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c (default_return_value_on_stack): New function. * arch-utils.h (default_return_value_on_stack): New declaration. * values.c (RETURN_VALUE_ON_STACK): Delete default definition.
2000-04-17Only dump IEEE_FLOAT when defined.Andrew Cagney1-0/+2
2000-04-17* remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.cAndrew Cagney1-0/+26
(MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h (BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE), gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR, FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Delete default definition. Handled by gdbarch. * gdbarch.sh: Make multi-arch defaults, defaults for non- multi-arch targets. (REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC, MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT, REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION): Provide default/legacy implementation. (REGISTER_NAMES, CALL_DUMMY): Allow legacy definition. * gdbarch.h, gdbarch.c: Re-generate.
2000-04-14Bring IEEE_FLOAT under gdbarch's control.Jim Blandy1-0/+23
* gdbarch.sh (IEEE_FLOAT): New entry. * gdbarch.c, gdbarch.h: Regenerated. * valprint.c (IEEE_FLOAT): Provide a default #definition for this. (print_floating): Use IEEE_FLOAT as if it were an expression; use the code specific to IEEE-format numbers whenever the value of IEEE_FLOAT is non-zero. * config/a29k/tm-a29k.h, config/alpha/tm-alpha.h, config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h, config/h8300/tm-h8300.h, config/i386/tm-i386.h, config/i960/tm-i960.h, config/m88k/tm-m88k.h, config/mips/tm-mips.h, config/pa/tm-hppa.h, config/sparc/tm-sparc.h, config/delta/tm-delta.h, config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define IEEE_FLOAT, make sure they give it the value (1).
2000-04-14* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two newJim Blandy1-0/+51
functions which architectures can redefine, defaulting to generic_pointer_to_address and generic_address_to_pointer. * findvar.c (extract_typed_address, store_typed_address, generic_pointer_to_address, generic_address_to_pointer): New functions. (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default definitions. (extract_address, store_address): Doc fixes. * values.c (value_as_pointer): Doc fix. (value_from_pointer): New function. * defs.h (extract_typed_address, store_typed_address): New declarations. * inferior.h (generic_address_to_pointer, generic_pointer_to_address): New declarations. * value.h (value_from_pointer): New declaration. * ax-gdb.c (const_var_ref): Use value_from_pointer, not value_from_longest. * blockframe.c (generic_push_dummy_frame): Use read_pc and read_sp, not read_register. * c-valprint.c (c_val_print): Use extract_typed_address instead of extract_address to extract vtable entries and references. * cp-valprint.c (cp_print_value_fields): Use value_from_pointer instead of value_from_longest to extract the vtable's address. * eval.c (evaluate_subexp_standard): Use value_from_pointer instead of value_from_longest to compute `this', and for doing pointer-to-member dereferencing. * findvar.c (read_register): Use extract_unsigned_integer, not extract_address. (read_var_value): Use store_typed_address instead of store_address for building label values. (locate_var_value): Use value_from_pointer instead of value_from_longest. * hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer, instead of value_from_longest, to build arguments to __d_shl_get. * printcmd.c (set_next_address): Use value_from_pointer, not value_from_longest. (x_command): Use value_from_pointer, not value_from_longest. * tracepoint.c (set_traceframe_context): Use value_from_pointer, not value_from_longest. * valarith.c (value_add, value_sub): Use value_from_pointer, not value_from_longest. * valops.c (find_function_in_inferior, value_coerce_array, value_coerce_function, value_addr, hand_function_call): Same. * value.h (COERCE_REF): Use unpack_pointer, not unpack_long. * values.c (unpack_long): Use extract_typed_address to produce addresses from pointers and references, not extract_address. (value_from_longest): Use store_typed_address instead of store_address to produce pointer and reference values.
2000-04-09Rename gdbarch-utils.[hc] to arch-utils.[hc]Andrew Cagney1-1/+1
2000-04-03* gdbarch-utils.h, gdbarch-utils.c: New files.Andrew Cagney1-45/+30
* Makefile.in (SFILES, COMMON_OBS): Update. (gdbarch_utils_h) Define. (gdbarch-utils.o): Add dependencies. * gdbarch.c, gdbarch.sh: Include "gdbarch-utils.h". Fix code handling default method values. (startup_gdbarch): Rename default_gdbarch, name misleading. (breakpoint_from_pc): Default to legacy_breakpoint_from_pc. (register_name): Default to legacy_register_name. (call_dummy_words): Default to legacy_call_dummy_words. (sizeof_call_dummy_words): Default to legacy_sizeof_call_dummy_words. (register_convertible): Default to generic_register_convertible_not. (breakpoint_from_pc): Default to legacy_breakpoint_from_pc. (remote_translate_xfer_address): Default to generic_remote_translate_xfer_address. (frameless_function_invocation): Default to generic_frameless_function_invocation_not.
2000-03-30gdbarch cleanups.Andrew Cagney1-96/+9
2000-03-28The set debug changesDaniel Berlin1-3/+15
2000-03-21* gdbarch.sh: Emit a definition and declaration for gdbarch_free,Jim Blandy1-0/+13
a companion to gdbarch_alloc, which allows a gdbarch init function to free partially-built gdbarch structures. * gdbarch.c, gdbarch.h: Regenerated.
2000-02-22Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.Jim Blandy1-0/+28
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be more function-like. (default_coerce_float_to_double, standard_coerce_float_to_double): New functions. (value_arg_coerce): Adjust for new definition. * value.h (default_coerce_float_to_double, standard_coerce_float_to_double): New declarations for the above. * gdbarch.sh (coerce_float_to_double): New entry, replacing macro. * gdbarch.c, gdbarch.h: Regenerated. * tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h, tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change definitions. * mips-tdep.c (mips_coerce_float_to_double): Supply our own custom function here. (mips_gdbarch_init): Install that as our coerce_float_to_double function.
2000-02-09Replace ../include/wait.h with gdb_wait.h.Andrew Cagney1-1/+1
generated by cgit v1.1 at 2024-11-20 05:11:34 +0000