aboutsummaryrefslogtreecommitdiff
path: root/gdb/findvar.c
AgeCommit message (Collapse)AuthorFilesLines
2023-09-20Remove explanatory comments from includesTom Tromey1-1/+1
I noticed a comment by an include and remembered that I think these don't really provide much value -- sometimes they are just editorial, and sometimes they are obsolete. I think it's better to just remove them. Tested by rebuilding. Approved-By: Andrew Burgess <aburgess@redhat.com>
2023-03-28Rename "raw" to "unrelocated"Tom Tromey1-1/+1
Per an earlier discussion, this patch renames the existing "raw" APIs to use the word "unrelocated" instead.
2023-03-28Use unrelocated_addr in minimal symbolsTom Tromey1-2/+2
This changes minimal symbols to use unrelocated_addr. I believe this detected a latent bug in add_pe_forwarded_sym.
2023-02-19Convert block_static_link to methodTom Tromey1-1/+1
This converts block_static_link to be a method. This was mostly written by script.
2023-02-19Convert block_static_block and block_global_block to methodsTom Tromey1-3/+3
This converts block_static_block and block_global_block to be methods. This was mostly written by script. It was simpler to convert them at the same time because they're often used near each other.
2023-02-19Convert block_inlined_p to methodTom Tromey1-1/+1
This converts block_inlined_p to be a method. This was mostly written by script.
2023-02-13Remove deprecated_lval_hackTom Tromey1-1/+1
This removes deprecated_lval_hack and the VALUE_LVAL macro, replacing all uses with a call to value::lval. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Introduce set_lval method on valueTom Tromey1-6/+6
This introduces the set_lval method on value, one step toward removing deprecated_lval_hack. Ultimately I think the goal should be for some of these set_* methods to be replaced with constructors; but I haven't done this, as the series is already too long. Other 'deprecated' methods can probably be handled the same way. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn various value copying-related functions into methodsTom Tromey1-1/+1
This patch turns a grab bag of value functions to methods of value. These are done together because their implementations are interrelated. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn many optimized-out value functions into methodsTom Tromey1-3/+3
This turns many functions that are related to optimized-out or availability-checking to be methods of value. The static function value_entirely_covered_by_range_vector is also converted to be a private method. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn value_fetch_lazy into a methodTom Tromey1-1/+1
This changes value_fetch_lazy to be a method of value. A few helper functions are converted as well, to avoid problems in later patches when the data members are all made private. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn some value_contents functions into methodsTom Tromey1-3/+3
This turns value_contents_raw, value_contents_writeable, and value_contents_all_raw into methods on value. The remaining functions will be changed later in the series; they were a bit trickier and so I didn't include them in this patch. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn allocate_optimized_out_value into static "constructor"Tom Tromey1-1/+1
This turns allocate_optimized_out_value into a static "constructor" of value. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn allocate_value into a static "constructor"Tom Tromey1-4/+4
This changes allocate_value to be a static "constructor" of value. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn allocate_value_lazy into a static "constructor"Tom Tromey1-1/+1
This changes allocate_value_lazy to be a static "constructor" of struct value. I considered trying to change value to use ordinary new/delete, but it seems to me that due to reference counting, we may someday want to change these static constructors to return value_ref_ptr instead. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn value_offset into methodTom Tromey1-3/+3
This changes value_offset to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-02-13Turn value_type into methodTom Tromey1-2/+2
This changes value_type to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi <simon.marchi@efficios.com>
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker1-1/+1
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2022-12-16gdb: fix crash when getting the value of a label symbolAndrew Burgess1-14/+26
When the source program contains a goto label, it turns out it's actually pretty hard for a user to find out more about that label. For example: (gdb) p some_label No symbol "some_label" in current context. (gdb) disassemble some_label No symbol "some_label" in current context. (gdb) x/10i some_label No symbol "some_label" in current context. (gdb) break some_label Breakpoint 2 at 0x401135: file /tmp/py-label-symbol-value.c, line 35. In all cases, some_label is a goto label within the current frame. Only placing a breakpoint on the label worked. This all seems a little strange to me, it feels like asking about a goto label would not be an unreasonable thing for a user to do. This commit doesn't fix any of the above issues, I mention them just to provide a little context for why the following issue has probably not been seen before. It turns out there is one way a user can access the symbol for a goto label, through the Python API: python frame = gdb.selected_frame() python frame_pc = frame.pc() python block = gdb.current_progspace().block_for_pc(frame_pc) python symbol,_ = gdb.lookup_symbol('some_label', block, gdb.SYMBOL_LABEL_DOMAIN) python print(str(symbol.value())) ../../src/gdb/findvar.c:204: internal-error: store_typed_address: Assertion `type->is_pointer_or_reference ()' failed. The problem is that label symbols are created using the builtin_core_addr type, which is a pure integer type. When GDB tries to fetch the value of a label symbol then we end up in findvar.c, in the function language_defn::read_var_value, in the LOC_LABEL case. From here store_typed_address is called to store the address of the label into a value object with builtin_core_addr type. The problem is that store_typed_address requires that the destination type be a pointer or reference, which the builtin_core_addr type is not. Now it's not clear what type a goto label address should have, but GCC has an extension that allows users to take the address of a goto label (using &&), in that case the result is of type 'void *'. I propose that when we convert the CORE_ADDR value to a GDB value object, we use builtin_func_ptr type instead of builtin_core_addr, this means the result will be of type 'void (*) ()'. The benefit of this approach is that when gdbarch_address_to_pointer is called the target type will be correctly identified as a pointer to code, which should mean any architecture specific adjustments are done correctly. We can then cast the new value to 'void *' type with a call to value_cast_pointer, this should not change the values bit representation, but will just update the type. After this asking for the value of a label symbol works just fine: (gdb) python print(str(symbol.value())) 0x401135 <main+35> And the type is maybe what we'd expect: (gdb) python print(str(symbol.value().type)) void *
2022-12-15gdb: use gdb_assert not internal_errorAndrew Burgess1-8/+2
Spotted a couple of places in findvar.c where we use: if ( ! CONDITION ) internal_error ("..."); this commit changes these to be: gdb_assert ( CONDITION ); which I think is better. Unless we happen to hit the internal_error calls (which was bad) there should be no user visible changes after this commit.
2022-10-19internal_error: remove need to pass __FILE__/__LINE__Pedro Alves1-4/+2
Currently, every internal_error call must be passed __FILE__/__LINE__ explicitly, like: internal_error (__FILE__, __LINE__, "foo %d", var); The need to pass in explicit __FILE__/__LINE__ is there probably because the function predates widespread and portable variadic macros availability. We can use variadic macros nowadays, and in fact, we already use them in several places, including the related gdb_assert_not_reached. So this patch renames the internal_error function to something else, and then reimplements internal_error as a variadic macro that expands __FILE__/__LINE__ itself. The result is that we now should call internal_error like so: internal_error ("foo %d", var); Likewise for internal_warning. The patch adjusts all calls sites. 99% of the adjustments were done with a perl/sed script. The non-mechanical changes are in gdbsupport/errors.h, gdbsupport/gdb_assert.h, and gdb/gdbarch.py. Approved-By: Simon Marchi <simon.marchi@efficios.com> Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
2022-10-10Change GDB to use frame_info_ptrTom Tromey1-13/+13
This changes GDB to use frame_info_ptr instead of frame_info * The substitution was done with multiple sequential `sed` commands: sed 's/^struct frame_info;/class frame_info_ptr;/' sed 's/struct frame_info \*/frame_info_ptr /g' - which left some issues in a few files, that were manually fixed. sed 's/\<frame_info \*/frame_info_ptr /g' sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace problems. The changed files were then manually checked and some 'sed' changes undone, some constructors and some gets were added, according to what made sense, and what Tromey originally did Co-Authored-By: Bruno Larsen <blarsen@redhat.com> Approved-by: Tom Tomey <tom@tromey.com>
2022-09-21gdb: remove TYPE_LENGTHSimon Marchi1-10/+10
Remove the macro, replace all uses with calls to type::length. Change-Id: Ib9bdc954576860b21190886534c99103d6a47afb
2022-05-05gdb: use gdb::function_view for ↵Simon Marchi1-41/+14
gdbarch_iterate_over_objfiles_in_search_order callback A rather straightforward patch to change an instance of callback + void pointer to gdb::function_view, allowing pasing lambdas that capture, and eliminating the need for the untyped pointer. Change-Id: I73ed644e7849945265a2c763f79f5456695b0037
2022-04-27gdb: remove BLOCK_ENTRY_PC macroSimon Marchi1-2/+2
Replace with equivalent method. Change-Id: I0e033095e7358799930775e61028b48246971a7d
2022-04-27gdb: remove BLOCK_SUPERBLOCK macroSimon Marchi1-1/+1
Replace with equivalent methods. Change-Id: I334a319909a50b5cc5570a45c38c70e10dc00630
2022-04-27gdb: remove BLOCK_FUNCTION macroSimon Marchi1-4/+4
Replace with equivalent methods. Change-Id: I31ec00f5bf85335c8b23d306ca0fe0b84d489101
2022-04-20Replace symbol_arch with symbol::archTom Tromey1-1/+1
This turns symbol_arch into a method on symbol.
2022-04-20Replace symbol_objfile with symbol::objfileTom Tromey1-5/+5
This turns symbol_objfile into a method on symbol.
2022-04-11gdb: remove symbol value macrosSimon Marchi1-14/+13
Remove all macros related to getting and setting some symbol value: #define SYMBOL_VALUE(symbol) (symbol)->value.ivalue #define SYMBOL_VALUE_ADDRESS(symbol) \ #define SET_SYMBOL_VALUE_ADDRESS(symbol, new_value) \ #define SYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes #define SYMBOL_VALUE_COMMON_BLOCK(symbol) (symbol)->value.common_block #define SYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block #define SYMBOL_VALUE_CHAIN(symbol) (symbol)->value.chain #define MSYMBOL_VALUE(symbol) (symbol)->value.ivalue #define MSYMBOL_VALUE_RAW_ADDRESS(symbol) ((symbol)->value.address + 0) #define MSYMBOL_VALUE_ADDRESS(objfile, symbol) \ #define BMSYMBOL_VALUE_ADDRESS(symbol) \ #define SET_MSYMBOL_VALUE_ADDRESS(symbol, new_value) \ #define MSYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes #define MSYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block Replace them with equivalent methods on the appropriate objects. Change-Id: Iafdab3b8eefc6dc2fd895aa955bf64fafc59ed50
2022-02-11Add initializers to bound_minimal_symbolTom Tromey1-2/+1
This adds initializers to bound_minimal_symbol, allowing for the removal of some calls to memset.
2022-02-06gdb: remove SYMBOL_TYPE macroSimon Marchi1-1/+1
Add a getter and a setter for a symbol's type. Remove the corresponding macro and adjust all callers. Change-Id: Ie1a137744c5bfe1df4d4f9ae5541c5299577c8de
2022-02-06gdb: remove SYMBOL_CLASS macro, add getterSimon Marchi1-3/+3
Change-Id: I83211d5a47efc0564386e5b5ea4a29c00b1fd46a
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-12-03gdb: make extract_integer take an array_viewSimon Marchi1-18/+17
I think it would make sense for extract_integer, extract_signed_integer and extract_unsigned_integer to take an array_view. This way, when we extract an integer, we can validate that we don't overflow the buffer passed by the caller (e.g. ask to extract a 4-byte integer but pass a 2-byte buffer). - Change extract_integer to take an array_view - Add overloads of extract_signed_integer and extract_unsigned_integer that take array_views. Keep the existing versions so we don't need to change all callers, but make them call the array_view versions. This shortens some places like: result = extract_unsigned_integer (value_contents (result_val).data (), TYPE_LENGTH (value_type (result_val)), byte_order); into result = extract_unsigned_integer (value_contents (result_val), byte_order); value_contents returns an array view that is of length `TYPE_LENGTH (value_type (result_val))` already, so the length is implicitly communicated through the array view. Change-Id: Ic1c1f98c88d5c17a8486393af316f982604d6c95
2021-11-18gdbsupport: make gdb_assert_not_reached accept a format stringSimon Marchi1-2/+2
Change gdb_assert_not_reached to accept a format string plus corresponding arguments. This allows giving more precise messages. Because the format string passed by the caller is prepended with a "%s:" to add the function name, the callers can no longer pass a translated string (`_(...)`). Make the gdb_assert_not_reached include the _(), just like the gdb_assert_fail macro just above. Change-Id: Id0cfda5a57979df6cdaacaba0d55dd91ae9efee7
2021-10-25gdb: change functions returning value contents to use gdb::array_viewSimon Marchi1-5/+5
The bug fixed by this [1] patch was caused by an out-of-bounds access to a value's content. The code gets the value's content (just a pointer) and then indexes it with a non-sensical index. This made me think of changing functions that return value contents to return array_views instead of a plain pointer. This has the advantage that when GDB is built with _GLIBCXX_DEBUG, accesses to the array_view are checked, making bugs more apparent / easier to find. This patch changes the return types of these functions, and updates callers to call .data() on the result, meaning it's not changing anything in practice. Additional work will be needed (which can be done little by little) to make callers propagate the use of array_view and reap the benefits. [1] https://sourceware.org/pipermail/gdb-patches/2021-September/182306.html Change-Id: I5151f888f169e1c36abe2cbc57620110673816f3
2021-09-23Change pointer_type to a method of struct typeTom Tromey1-2/+2
I noticed that pointer_type is declared in language.h and defined in language.c. However, it really has to do with types, so it should have been in gdbtypes.h all along. This patch changes it to be a method on struct type. And, I went through uses of TYPE_IS_REFERENCE and updated many spots to use the new method as well. (I didn't update ones that were in arch-specific code, as I couldn't readily test that.)
2021-02-10gdb: Delete SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTIONAndrew Burgess1-10/+8
Replace the two macros SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTION with a member function on general_symbol_info. There should be no user visible change after this commit. gdb/ChangeLog: * breakpoint.c (resolve_sal_pc): Replace SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTION. * findvar.c (language_defn::read_var_value): Likewise. * infcmd.c (jump_command): Likewise. * linespec.c (minsym_found): Likewise. * maint.c (maintenance_translate_address): Likewise. * minsyms.c (lookup_minimal_symbol_by_pc_section): Likewise. (minimal_symbol_upper_bound): Likewise. * parse.c (find_minsym_type_and_address): Likewise. (operator_check_standard): Likewise. * printcmd.c (info_address_command): Likewise. * symmisc.c (dump_msymbols): Likewise. (print_symbol): Likewise. * symtab.c (general_symbol_info::obj_section): Define new function. (fixup_symbol_section): Replace SYMBOL_OBJ_SECTION. (find_pc_sect_compunit_symtab): Likewise. (find_function_start_sal): Likewise. (skip_prologue_sal): Replace SYMBOL_OBJ_SECTION and MSYMBOL_OBJ_SECTION. * symtab.h (struct general_symbol_info) <obj_section>: Declare new function. (SYMBOL_OBJ_SECTION): Delete. (MSYMBOL_OBJ_SECTION): Delete.
2021-01-28gdb: rename get_type_arch to type::archSimon Marchi1-2/+2
... and update all users. gdb/ChangeLog: * gdbtypes.h (get_type_arch): Rename to... (struct type) <arch>: ... this, update all users. Change-Id: I0e3ef938a0afe798ac0da74a9976bbd1d082fc6f
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-11-02gdb, gdbserver, gdbsupport: fix leading space vs tabs issuesSimon Marchi1-13/+13
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
2020-09-28Remove target_has_registers macroTom Tromey1-1/+1
This removes the target_has_registers object-like macro, replacing it with the underlying function. gdb/ChangeLog 2020-09-28 Tom Tromey <tom@tromey.com> * tui/tui-regs.c (tui_get_register) (tui_data_window::show_registers): Update. * thread.c (scoped_restore_current_thread::restore) (scoped_restore_current_thread::scoped_restore_current_thread): Update. * regcache-dump.c (regcache_print): Update. * python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb): Update. * mi/mi-main.c (mi_cmd_data_write_register_values): Update. * mep-tdep.c (current_me_module, current_options): Update. * linux-thread-db.c (thread_db_load): Update. * infcmd.c (registers_info, info_vector_command) (info_float_command): Update. * ia64-tdep.c (ia64_frame_prev_register) (ia64_sigtramp_frame_prev_register): Update. * ia64-libunwind-tdep.c (libunwind_frame_prev_register): Update. * gcore.c (derive_stack_segment): Update. * frame.c (get_current_frame, has_stack_frames): Update. * findvar.c (language_defn::read_var_value): Update. * arm-tdep.c (arm_pc_is_thumb): Update. * target.c (target_has_registers): Rename from target_has_registers_1. * target.h (target_has_registers): Remove macro. (target_has_registers): Rename from target_has_registers_1.
2020-07-06gdb: Python unwinders, inline frames, and tail-call framesAndrew Burgess1-0/+8
This started with me running into the bug described in python/22748, in summary, if the frame sniffing code accessed any registers within an inline frame then GDB would crash with this error: gdb/frame.c:579: internal-error: frame_id get_frame_id(frame_info*): Assertion `fi->level == 0' failed. The problem is that, when in the Python unwinder I write this: pending_frame.read_register ("register-name") This is translated internally into a call to `value_of_register', which in turn becomes a call to `value_of_register_lazy'. Usually this isn't a problem, `value_of_register_lazy' requires the next frame (more inner) to have a valid frame_id, which will be the case (if we're sniffing frame #1, then frame #0 will have had its frame-id figured out). Unfortunately if frame #0 is inline within frame #1, then the frame-id for frame #0 can't be computed until we have the frame-id for #1. As a result we can't create a lazy register for frame #1 when frame #0 is inline. Initially I proposed a solution inline with that proposed in bugzilla, changing value_of_register to avoid creating a lazy register value. However, when this was discussed on the mailing list I got this reply: https://sourceware.org/pipermail/gdb-patches/2020-June/169633.html Which led me to look at these two patches: [1] https://sourceware.org/pipermail/gdb-patches/2020-April/167612.html [2] https://sourceware.org/pipermail/gdb-patches/2020-April/167930.html When I considered patches [1] and [2] I saw that all of the issues being addressed here were related, and that there was a single solution that could address all of these issues. First I wrote the new test gdb.opt/inline-frame-tailcall.exp, which shows that [1] and [2] regress the inline tail-call unwinder, the reason for this is that these two patches replace a call to gdbarch_unwind_pc with a call to get_frame_register, however, this is not correct. The previous call to gdbarch_unwind_pc takes THIS_FRAME and returns the $pc value in the previous frame. In contrast get_frame_register takes THIS_FRAME and returns the value of the $pc in THIS_FRAME; these calls are not equivalent. The reason these patches appear (or do) fix the regressions listed in [1] is that the tail call sniffer depends on identifying the address of a caller and a callee, GDB then looks for a tail-call sequence that takes us from the caller address to the callee, if such a series is found then tail-call frames are added. The bug that was being hit, and which was address in patch [1] is that in order to find the address of the caller, GDB ended up creating a lazy register value for an inline frame with to frame-id. The solution in patch [1] is to instead take the address of the callee and treat this as the address of the caller. Getting the address of the callee works, but we then end up looking for a tail-call series from the callee to the callee, which obviously doesn't return any sane results, so we don't insert any tail call frames. The original patch [1] did cause some breakage, so patch [2] undid patch [1] in all cases except those where we had an inline frame with no frame-id. It just so happens that there were no tests that fitted this description _and_ which required tail-call frames to be successfully spotted, as a result patch [2] appeared to work. The new test inline-frame-tailcall.exp, exposes the flaw in patch [2]. This commit undoes patch [1] and [2], and replaces them with a new solution, which is also different to the solution proposed in the python/22748 bug report. In this solution I propose that we introduce some special case logic to value_of_register_lazy. To understand what this logic is we must first look at how inline frames unwind registers, this is very simple, they do this: static struct value * inline_frame_prev_register (struct frame_info *this_frame, void **this_cache, int regnum) { return get_frame_register_value (this_frame, regnum); } And remember: struct value * get_frame_register_value (struct frame_info *frame, int regnum) { return frame_unwind_register_value (frame->next, regnum); } So in all cases, unwinding a register in an inline frame just asks the next frame to unwind the register, this makes sense, as an inline frame doesn't really exist, when we unwind a register in an inline frame, we're really just asking the next frame for the value of the register in the previous, non-inline frame. So, if we assume that we only get into the missing frame-id situation when we try to unwind a register from an inline frame during the frame sniffing process, then we can change value_of_register_lazy to not create lazy register values for an inline frame. Imagine this stack setup, where #1 is inline within #2. #3 -> #2 -> #1 -> #0 \______/ inline Now when trying to figure out the frame-id for #1, we need to compute the frame-id for #2. If the frame sniffer for #2 causes a lazy register read in #2, either due to a Python Unwinder, or for the tail-call sniffer, then we call value_of_register_lazy passing in frame #2. In value_of_register_lazy, we grab the next frame, which is #1, and we used to then ask for the frame-id of #1, which was not computed, and this was our bug. Now, I propose we spot that #1 is an inline frame, and so lookup the next frame of #1, which is #0. As #0 is not inline it will have a valid frame-id, and so we create a lazy register value using #0 as the next-frame-id. This will give us the exact same result we had previously (thanks to the code we inspected above). Encoding into value_of_register_lazy the knowledge that reading an inline frame register will always just forward to the next frame feels.... not ideal, but this seems like the cleanest solution to this recursive frame-id computation/sniffing issue that appears to crop up. The following two commits are fully reverted with this commit, these correspond to patches [1] and [2] respectively: commit 5939967b355ba6a940887d19847b7893a4506067 Date: Tue Apr 14 17:26:22 2020 -0300 Fix inline frame unwinding breakage commit 991a3e2e9944a4b3a27bd989ac03c18285bd545d Date: Sat Apr 25 00:32:44 2020 -0300 Fix remaining inline/tailcall unwinding breakage for x86_64 gdb/ChangeLog: PR python/22748 * dwarf2/frame-tailcall.c (dwarf2_tailcall_sniffer_first): Remove special handling for inline frames. * findvar.c (value_of_register_lazy): Skip inline frames when creating lazy register values. * frame.c (frame_id_computed_p): Delete definition. * frame.h (frame_id_computed_p): Delete declaration. gdb/testsuite/ChangeLog: PR python/22748 * gdb.opt/inline-frame-tailcall.c: New file. * gdb.opt/inline-frame-tailcall.exp: New file. * gdb.python/py-unwind-inline.c: New file. * gdb.python/py-unwind-inline.exp: New file. * gdb.python/py-unwind-inline.py: New file.
2020-06-02gdb: Convert language la_read_var_value field to a methodAndrew Burgess1-7/+6
This commit changes the language_data::la_read_var_value function pointer member variable into a member function of language_defn. An interesting aspect of this change is that the implementation of language_defn::read_var_value is actually in findvar.c. This is partly historical, the new language_defn::read_var_value is a rename of default_read_var_value, which was already in that file, but also, that is the file that contains the helper functions needed by the read_var_value method, so it makes sens that the method implementation should continue to live there (I think). There should be no user visible changes after this commit. gdb/ChangeLog: * ada-lang.c (ada_read_var_value): Delete function, move implementation to... (ada_language::read_var_value): ...here. (ada_language_data): Delete la_read_var_value initializer. * c-lang.c (c_language_data): Likewise. (cplus_language_data): Likewise. (minimal_language_data): Likewise. * d-lang.c (d_language_data): Likewise. * f-lang.c (f_language_data): Likewise. * findvar.c (default_read_var_value): Rename to... (language_defn::read_var_value): ...this. * findvar.c (read_var_value): Update header comment, and change to call member function instead of function pointer. * go-lang.c (go_language_data): Likewise. * language.c (unknown_language_data): Delete la_read_var_value initializer. (auto_language_data): Likewise. * language.h (struct language_data): Delete la_read_var_value field. (language_defn::read_var_value): New member function. (default_read_var_value): Delete declaration. * m2-lang.c (m2_language_data): Delete la_read_var_value initializer. * objc-lang.c (objc_language_data): Likewise. * opencl-lang.c (opencl_language_data): Likewise. * p-lang.c (pascal_language_data): Likewise. * rust-lang.c (rust_language_data): Likewise. * value.h (default_read_var_value): Delete declaration.
2020-05-14gdb: remove TYPE_CODE macroSimon Marchi1-4/+4
Remove TYPE_CODE, changing all the call sites to use type::code directly. This is quite a big diff, but this was mostly done using sed and coccinelle. A few call sites were done by hand. gdb/ChangeLog: * gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use type::code instead.
2020-04-24Prefer existing data when evaluating DWARF expressionTom Tromey1-3/+3
When evaluating a DWARF expression, the dynamic type resolution code will pass in a buffer of bytes via the property_addr_info. However, the DWARF expression evaluator will then proceed to read memory from the inferior, even when the request could be filled from this buffer. This, in turn, is a problem in some cases; and specifically when trying to handle the Ada scenario of extracting a variable-length value from a packed array. Here, the ordinary DWARF expression cannot be directly evaluated, because the data may appear at some arbitrary bit offset. So, it is unpacked into a staging area and then the expression is evaluated -- using an address of 0. This patch fixes the problem by arranging for the DWARF evaluator, in this case, to prefer passed-in memory when possible. The type of the buffer in the property_addr_info is changed to an array_view so that bounds checking can be done. gdb/ChangeLog 2020-04-24 Tom Tromey <tromey@adacore.com> * ada-lang.c (ada_discrete_type_high_bound, ada_discrete_type_low) (ada_value_primitive_packed_val): Update. * ada-valprint.c (ada_value_print_1): Update. * dwarf2/loc.c (evaluate_for_locexpr_baton): New struct. (dwarf2_locexpr_baton_eval): Take a property_addr_info rather than just an address. Use evaluate_for_locexpr_baton. (dwarf2_evaluate_property): Update. * dwarf2/loc.h (struct property_addr_info) <valaddr>: Now an array_view. * findvar.c (default_read_var_value): Update. * gdbtypes.c (compute_variant_fields_inner) (resolve_dynamic_type_internal): Update. (resolve_dynamic_type): Change type of valaddr parameter. * gdbtypes.h (resolve_dynamic_type): Update. * valarith.c (value_subscripted_rvalue): Update. * value.c (value_from_contents_and_address): Update.
2020-02-08Move DWARF code to dwarf2/ subdirectoryTom Tromey1-1/+1
This moves all the remaining DWARF code to the new dwarf2 subdirectory. This is just a simple renaming, with updates to includes as needed. gdb/ChangeLog 2020-02-08 Tom Tromey <tom@tromey.com> * dwarf2/expr.c: Rename from dwarf2expr.c. * dwarf2/expr.h: Rename from dwarf2expr.h. * dwarf2/frame-tailcall.c: Rename from dwarf2-frame-tailcall.c. * dwarf2/frame-tailcall.h: Rename from dwarf2-frame-tailcall.h. * dwarf2/frame.c: Rename from dwarf2-frame.c. * dwarf2/frame.h: Rename from dwarf2-frame.h. * dwarf2/index-cache.c: Rename from dwarf-index-cache.c. * dwarf2/index-cache.h: Rename from dwarf-index-cache.h. * dwarf2/index-common.c: Rename from dwarf-index-common.c. * dwarf2/index-common.h: Rename from dwarf-index-common.h. * dwarf2/index-write.c: Rename from dwarf-index-write.c. * dwarf2/index-write.h: Rename from dwarf-index-write.h. * dwarf2/loc.c: Rename from dwarf2loc.c. * dwarf2/loc.h: Rename from dwarf2loc.h. * dwarf2/read.c: Rename from dwarf2read.c. * dwarf2/read.h: Rename from dwarf2read.h. * dwarf2/abbrev.c, aarch64-tdep.c, alpha-tdep.c, amd64-darwin-tdep.c, arc-tdep.c, arm-tdep.c, bfin-tdep.c, compile/compile-c-symbols.c, compile/compile-cplus-symbols.c, compile/compile-loc2c.c, cris-tdep.c, csky-tdep.c, findvar.c, gdbtypes.c, guile/scm-type.c, h8300-tdep.c, hppa-bsd-tdep.c, hppa-linux-tdep.c, i386-darwin-tdep.c, i386-linux-tdep.c, i386-tdep.c, iq2000-tdep.c, m32c-tdep.c, m68hc11-tdep.c, m68k-tdep.c, microblaze-tdep.c, mips-tdep.c, mn10300-tdep.c, msp430-tdep.c, nds32-tdep.c, nios2-tdep.c, or1k-tdep.c, riscv-tdep.c, rl78-tdep.c, rs6000-tdep.c, rx-tdep.c, s12z-tdep.c, s390-tdep.c, score-tdep.c, sh-tdep.c, sparc-linux-tdep.c, sparc-tdep.c, sparc64-linux-tdep.c, sparc64-tdep.c, tic6x-tdep.c, tilegx-tdep.c, v850-tdep.c, xstormy16-tdep.c, xtensa-tdep.c: Update. * Makefile.in (COMMON_SFILES): Update. (HFILES_NO_SRCDIR): Update. Change-Id: Ied9ce1436cd27ac4a4cffef10ec92e396f181928
2020-01-13gdb: add back declarations for _initialize functionsSimon Marchi1-1/+2
I'd like to enable the -Wmissing-declarations warning. However, it warns for every _initialize function, for example: CXX dcache.o /home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’: /home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations] _initialize_dcache (void) ^~~~~~~~~~~~~~~~~~ The only practical way forward I found is to add back the declarations, which were removed by this commit: commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9 Author: John Baldwin <jhb@FreeBSD.org> Date: Sat Sep 9 11:02:37 2017 -0700 Remove unnecessary function prototypes. I don't think it's a big problem to have the declarations for these functions, but if anybody has a better solution for this, I'll be happy to use it. gdb/ChangeLog: * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration. * aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration. * aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration. * aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration. * aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration. * ada-exp.y (_initialize_ada_exp): Add declaration. * ada-lang.c (_initialize_ada_language): Add declaration. * ada-tasks.c (_initialize_tasks): Add declaration. * agent.c (_initialize_agent): Add declaration. * aix-thread.c (_initialize_aix_thread): Add declaration. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration. * alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration. * alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration. * alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration. * alpha-tdep.c (_initialize_alpha_tdep): Add declaration. * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration. * amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration. * amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration. * amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration. * amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration. * amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration. * amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration. * amd64-tdep.c (_initialize_amd64_tdep): Add declaration. * amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration. * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration. * annotate.c (_initialize_annotate): Add declaration. * arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration. * arc-tdep.c (_initialize_arc_tdep): Add declaration. * arch-utils.c (_initialize_gdbarch_utils): Add declaration. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration. * arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration. * arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration. * arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration. * arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration. * arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration. * arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration. * arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration. * arm-tdep.c (_initialize_arm_tdep): Add declaration. * arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration. * auto-load.c (_initialize_auto_load): Add declaration. * auxv.c (_initialize_auxv): Add declaration. * avr-tdep.c (_initialize_avr_tdep): Add declaration. * ax-gdb.c (_initialize_ax_gdb): Add declaration. * bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration. * bfin-tdep.c (_initialize_bfin_tdep): Add declaration. * break-catch-sig.c (_initialize_break_catch_sig): Add declaration. * break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration. * break-catch-throw.c (_initialize_break_catch_throw): Add declaration. * breakpoint.c (_initialize_breakpoint): Add declaration. * bsd-uthread.c (_initialize_bsd_uthread): Add declaration. * btrace.c (_initialize_btrace): Add declaration. * charset.c (_initialize_charset): Add declaration. * cli/cli-cmds.c (_initialize_cli_cmds): Add declaration. * cli/cli-dump.c (_initialize_cli_dump): Add declaration. * cli/cli-interp.c (_initialize_cli_interp): Add declaration. * cli/cli-logging.c (_initialize_cli_logging): Add declaration. * cli/cli-script.c (_initialize_cli_script): Add declaration. * cli/cli-style.c (_initialize_cli_style): Add declaration. * coff-pe-read.c (_initialize_coff_pe_read): Add declaration. * coffread.c (_initialize_coffread): Add declaration. * compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration. * compile/compile.c (_initialize_compile): Add declaration. * complaints.c (_initialize_complaints): Add declaration. * completer.c (_initialize_completer): Add declaration. * copying.c (_initialize_copying): Add declaration. * corefile.c (_initialize_core): Add declaration. * corelow.c (_initialize_corelow): Add declaration. * cp-abi.c (_initialize_cp_abi): Add declaration. * cp-namespace.c (_initialize_cp_namespace): Add declaration. * cp-support.c (_initialize_cp_support): Add declaration. * cp-valprint.c (_initialize_cp_valprint): Add declaration. * cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration. * cris-tdep.c (_initialize_cris_tdep): Add declaration. * csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration. * csky-tdep.c (_initialize_csky_tdep): Add declaration. * ctfread.c (_initialize_ctfread): Add declaration. * d-lang.c (_initialize_d_language): Add declaration. * darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration. * darwin-nat.c (_initialize_darwin_nat): Add declaration. * dbxread.c (_initialize_dbxread): Add declaration. * dcache.c (_initialize_dcache): Add declaration. * disasm-selftests.c (_initialize_disasm_selftests): Add declaration. * disasm.c (_initialize_disasm): Add declaration. * dtrace-probe.c (_initialize_dtrace_probe): Add declaration. * dummy-frame.c (_initialize_dummy_frame): Add declaration. * dwarf-index-cache.c (_initialize_index_cache): Add declaration. * dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration. * dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration. * dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration. * dwarf2expr.c (_initialize_dwarf2expr): Add declaration. * dwarf2loc.c (_initialize_dwarf2loc): Add declaration. * dwarf2read.c (_initialize_dwarf2_read): Add declaration. * elfread.c (_initialize_elfread): Add declaration. * exec.c (_initialize_exec): Add declaration. * extension.c (_initialize_extension): Add declaration. * f-lang.c (_initialize_f_language): Add declaration. * f-valprint.c (_initialize_f_valprint): Add declaration. * fbsd-nat.c (_initialize_fbsd_nat): Add declaration. * fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration. * filesystem.c (_initialize_filesystem): Add declaration. * findcmd.c (_initialize_mem_search): Add declaration. * findvar.c (_initialize_findvar): Add declaration. * fork-child.c (_initialize_fork_child): Add declaration. * frame-base.c (_initialize_frame_base): Add declaration. * frame-unwind.c (_initialize_frame_unwind): Add declaration. * frame.c (_initialize_frame): Add declaration. * frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration. * frv-tdep.c (_initialize_frv_tdep): Add declaration. * ft32-tdep.c (_initialize_ft32_tdep): Add declaration. * gcore.c (_initialize_gcore): Add declaration. * gdb-demangle.c (_initialize_gdb_demangle): Add declaration. * gdb_bfd.c (_initialize_gdb_bfd): Add declaration. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration. * gdbarch.c (_initialize_gdbarch): Add declaration. * gdbtypes.c (_initialize_gdbtypes): Add declaration. * gnu-nat.c (_initialize_gnu_nat): Add declaration. * gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration. * gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration. * go-lang.c (_initialize_go_language): Add declaration. * go32-nat.c (_initialize_go32_nat): Add declaration. * guile/guile.c (_initialize_guile): Add declaration. * h8300-tdep.c (_initialize_h8300_tdep): Add declaration. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration. * hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration. * hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration. * hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration. * hppa-tdep.c (_initialize_hppa_tdep): Add declaration. * i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration. * i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration. * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration. * i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration. * i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration. * i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration. * i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration. * i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration. * i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration. * i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration. * i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration. * i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration. * i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration. * i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration. * i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration. * i386-tdep.c (_initialize_i386_tdep): Add declaration. * i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration. * ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration. * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration. * ia64-tdep.c (_initialize_ia64_tdep): Add declaration. * ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration. * infcall.c (_initialize_infcall): Add declaration. * infcmd.c (_initialize_infcmd): Add declaration. * inflow.c (_initialize_inflow): Add declaration. * infrun.c (_initialize_infrun): Add declaration. * interps.c (_initialize_interpreter): Add declaration. * iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration. * jit.c (_initialize_jit): Add declaration. * language.c (_initialize_language): Add declaration. * linux-fork.c (_initialize_linux_fork): Add declaration. * linux-nat.c (_initialize_linux_nat): Add declaration. * linux-tdep.c (_initialize_linux_tdep): Add declaration. * linux-thread-db.c (_initialize_thread_db): Add declaration. * lm32-tdep.c (_initialize_lm32_tdep): Add declaration. * m2-lang.c (_initialize_m2_language): Add declaration. * m32c-tdep.c (_initialize_m32c_tdep): Add declaration. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration. * m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration. * m32r-tdep.c (_initialize_m32r_tdep): Add declaration. * m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration. * m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration. * m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration. * m68k-tdep.c (_initialize_m68k_tdep): Add declaration. * machoread.c (_initialize_machoread): Add declaration. * macrocmd.c (_initialize_macrocmd): Add declaration. * macroscope.c (_initialize_macroscope): Add declaration. * maint-test-options.c (_initialize_maint_test_options): Add declaration. * maint-test-settings.c (_initialize_maint_test_settings): Add declaration. * maint.c (_initialize_maint_cmds): Add declaration. * mdebugread.c (_initialize_mdebugread): Add declaration. * memattr.c (_initialize_mem): Add declaration. * mep-tdep.c (_initialize_mep_tdep): Add declaration. * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration. * mi/mi-cmds.c (_initialize_mi_cmds): Add declaration. * mi/mi-interp.c (_initialize_mi_interp): Add declaration. * mi/mi-main.c (_initialize_mi_main): Add declaration. * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration. * microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration. * mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration. * mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration. * mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration. * mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration. * mips-tdep.c (_initialize_mips_tdep): Add declaration. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration. * mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration. * mipsread.c (_initialize_mipsread): Add declaration. * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration. * mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration. * moxie-tdep.c (_initialize_moxie_tdep): Add declaration. * msp430-tdep.c (_initialize_msp430_tdep): Add declaration. * nds32-tdep.c (_initialize_nds32_tdep): Add declaration. * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration. * nios2-tdep.c (_initialize_nios2_tdep): Add declaration. * nto-procfs.c (_initialize_procfs): Add declaration. * objc-lang.c (_initialize_objc_language): Add declaration. * observable.c (_initialize_observer): Add declaration. * opencl-lang.c (_initialize_opencl_language): Add declaration. * or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration. * or1k-tdep.c (_initialize_or1k_tdep): Add declaration. * osabi.c (_initialize_gdb_osabi): Add declaration. * osdata.c (_initialize_osdata): Add declaration. * p-valprint.c (_initialize_pascal_valprint): Add declaration. * parse.c (_initialize_parse): Add declaration. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration. * ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration. * ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration. * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration. * ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration. * printcmd.c (_initialize_printcmd): Add declaration. * probe.c (_initialize_probe): Add declaration. * proc-api.c (_initialize_proc_api): Add declaration. * proc-events.c (_initialize_proc_events): Add declaration. * proc-service.c (_initialize_proc_service): Add declaration. * procfs.c (_initialize_procfs): Add declaration. * producer.c (_initialize_producer): Add declaration. * psymtab.c (_initialize_psymtab): Add declaration. * python/python.c (_initialize_python): Add declaration. * ravenscar-thread.c (_initialize_ravenscar): Add declaration. * record-btrace.c (_initialize_record_btrace): Add declaration. * record-full.c (_initialize_record_full): Add declaration. * record.c (_initialize_record): Add declaration. * regcache-dump.c (_initialize_regcache_dump): Add declaration. * regcache.c (_initialize_regcache): Add declaration. * reggroups.c (_initialize_reggroup): Add declaration. * remote-notif.c (_initialize_notif): Add declaration. * remote-sim.c (_initialize_remote_sim): Add declaration. * remote.c (_initialize_remote): Add declaration. * reverse.c (_initialize_reverse): Add declaration. * riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration. * riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration. * riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration. * riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration. * riscv-tdep.c (_initialize_riscv_tdep): Add declaration. * rl78-tdep.c (_initialize_rl78_tdep): Add declaration. * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration. * rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep): Add declaration. * rs6000-nat.c (_initialize_rs6000_nat): Add declaration. * rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration. * run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration. * rust-exp.y (_initialize_rust_exp): Add declaration. * rx-tdep.c (_initialize_rx_tdep): Add declaration. * s12z-tdep.c (_initialize_s12z_tdep): Add declaration. * s390-linux-nat.c (_initialize_s390_nat): Add declaration. * s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration. * s390-tdep.c (_initialize_s390_tdep): Add declaration. * score-tdep.c (_initialize_score_tdep): Add declaration. * ser-go32.c (_initialize_ser_dos): Add declaration. * ser-mingw.c (_initialize_ser_windows): Add declaration. * ser-pipe.c (_initialize_ser_pipe): Add declaration. * ser-tcp.c (_initialize_ser_tcp): Add declaration. * ser-uds.c (_initialize_ser_socket): Add declaration. * ser-unix.c (_initialize_ser_hardwire): Add declaration. * serial.c (_initialize_serial): Add declaration. * sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration. * sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration. * sh-tdep.c (_initialize_sh_tdep): Add declaration. * skip.c (_initialize_step_skip): Add declaration. * sol-thread.c (_initialize_sol_thread): Add declaration. * solib-aix.c (_initialize_solib_aix): Add declaration. * solib-darwin.c (_initialize_darwin_solib): Add declaration. * solib-dsbt.c (_initialize_dsbt_solib): Add declaration. * solib-frv.c (_initialize_frv_solib): Add declaration. * solib-svr4.c (_initialize_svr4_solib): Add declaration. * solib-target.c (_initialize_solib_target): Add declaration. * solib.c (_initialize_solib): Add declaration. * source-cache.c (_initialize_source_cache): Add declaration. * source.c (_initialize_source): Add declaration. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration. * sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration. * sparc-nat.c (_initialize_sparc_nat): Add declaration. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration. * sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration. * sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration. * sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration. * sparc-tdep.c (_initialize_sparc_tdep): Add declaration. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration. * sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration. * sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration. * sparc64-nat.c (_initialize_sparc64_nat): Add declaration. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration. * sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration. * sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration. * sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration. * sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration. * stabsread.c (_initialize_stabsread): Add declaration. * stack.c (_initialize_stack): Add declaration. * stap-probe.c (_initialize_stap_probe): Add declaration. * std-regs.c (_initialize_frame_reg): Add declaration. * symfile-debug.c (_initialize_symfile_debug): Add declaration. * symfile-mem.c (_initialize_symfile_mem): Add declaration. * symfile.c (_initialize_symfile): Add declaration. * symmisc.c (_initialize_symmisc): Add declaration. * symtab.c (_initialize_symtab): Add declaration. * target.c (_initialize_target): Add declaration. * target-connection.c (_initialize_target_connection): Add declaration. * target-dcache.c (_initialize_target_dcache): Add declaration. * target-descriptions.c (_initialize_target_descriptions): Add declaration. * thread.c (_initialize_thread): Add declaration. * tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration. * tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration. * tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration. * tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration. * tracectf.c (_initialize_ctf): Add declaration. * tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration. * tracefile.c (_initialize_tracefile): Add declaration. * tracepoint.c (_initialize_tracepoint): Add declaration. * tui/tui-hooks.c (_initialize_tui_hooks): Add declaration. * tui/tui-interp.c (_initialize_tui_interp): Add declaration. * tui/tui-layout.c (_initialize_tui_layout): Add declaration. * tui/tui-regs.c (_initialize_tui_regs): Add declaration. * tui/tui-stack.c (_initialize_tui_stack): Add declaration. * tui/tui-win.c (_initialize_tui_win): Add declaration. * tui/tui.c (_initialize_tui): Add declaration. * typeprint.c (_initialize_typeprint): Add declaration. * ui-style.c (_initialize_ui_style): Add declaration. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration. * unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration. * unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration. * unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration. * unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration. * unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration. * unittests/filtered_iterator-selftests.c (_initialize_filtered_iterator_selftests): Add declaration. * unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration. * unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration. * unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration. * unittests/main-thread-selftests.c (_initialize_main_thread_selftests): Add declaration. * unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration. * unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration. * unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration. * unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration. * unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration. * unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration. * unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration. * unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration. * unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration. * unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration. * unittests/style-selftests.c (_initialize_style_selftest): Add declaration. * unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration. * unittests/tui-selftests.c (_initialize_tui_selftest): Add declaration. * unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration. * unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration. * unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration. * unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration. * user-regs.c (_initialize_user_regs): Add declaration. * utils.c (_initialize_utils): Add declaration. * v850-tdep.c (_initialize_v850_tdep): Add declaration. * valops.c (_initialize_valops): Add declaration. * valprint.c (_initialize_valprint): Add declaration. * value.c (_initialize_values): Add declaration. * varobj.c (_initialize_varobj): Add declaration. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration. * vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration. * vax-tdep.c (_initialize_vax_tdep): Add declaration. * windows-nat.c (_initialize_windows_nat): Add declaration. (_initialize_check_for_gdb_ini): Add declaration. (_initialize_loadable): Add declaration. * windows-tdep.c (_initialize_windows_tdep): Add declaration. * x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration. * x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration. * xcoffread.c (_initialize_xcoffread): Add declaration. * xml-support.c (_initialize_xml_support): Add declaration. * xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration. * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration. * xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration. Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
generated by cgit v1.1 at 2025-02-17 11:18:20 +0000