| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I touched symtab.h and was surprised to see how many files were
rebuilt. I looked into it a bit, and found that defs.h includes
gdbarch.h, which in turn includes many things.
gdbarch.h is only needed by a minority ofthe files in gdb, so this
patch removes the include from defs.h and updates the fallout.
I did "wc -l" on the files in build/gdb/.deps; this patch reduces the
line count from 139935 to 137030; so there are definitely future
build-time savings here.
Note that while I configured with --enable-targets=all, it's possible
that some *-nat.c file needs an update. I could not test all of
these. The buildbot caught a few problems along these lines.
gdb/ChangeLog
2019-07-10 Tom Tromey <tom@tromey.com>
* defs.h: Don't include gdbarch.h.
* aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h,
alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h,
ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c,
cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h,
cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c,
compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c,
cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c,
dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c,
dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c,
dwarf2expr.c, expression.h, f-lang.c, frame-base.c,
frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h,
go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c,
i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c,
linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c,
mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c,
objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c,
parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c,
record-btrace.c, record.h, regcache-dump.c, regcache.h,
riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y,
sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c,
sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c,
sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h,
target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c,
tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c,
utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c,
xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update.
* s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Supply default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp. This patch doesn't actually
convert any targets to use these methods, and so, there will be no
user visible changes after this commit.
The implementations for default_dummy_id and default_unwind_sp are
fairly straight forward, these just take on the pattern used by most
targets. Once these default methods are in place then most targets
will be able to switch over.
The implementation for default_unwind_pc is also fairly straight
forward, but maybe needs some explanation.
This patch has gone through a number of iterations:
https://sourceware.org/ml/gdb-patches/2018-03/msg00165.html
https://sourceware.org/ml/gdb-patches/2018-03/msg00306.html
https://sourceware.org/ml/gdb-patches/2018-06/msg00090.html
https://sourceware.org/ml/gdb-patches/2018-09/msg00127.html
and the implementation of default_unwind_pc has changed over this
time. Originally, I took an implementation like this:
CORE_ADDR
default_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
int pc_regnum = gdbarch_pc_regnum (gdbarch);
return frame_unwind_register_unsigned (next_frame, pc_regnum);
}
This is basically a clone of default_unwind_sp, but using $pc. It was
pointed out that we could potentially do better, and in version 2 the
implementation became:
CORE_ADDR
default_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
struct type *type;
int pc_regnum;
CORE_ADDR addr;
struct value *value;
pc_regnum = gdbarch_pc_regnum (gdbarch);
value = frame_unwind_register_value (next_frame, pc_regnum);
type = builtin_type (gdbarch)->builtin_func_ptr;
addr = extract_typed_address (value_contents_all (value), type);
addr = gdbarch_addr_bits_remove (gdbarch, addr);
release_value (value);
value_free (value);
return addr;
}
The idea was to try split out some of the steps of unwinding the $pc,
steps that are on some (or many) targets no-ops, and so allow targets
that do override these methods, to make use of default_unwind_pc.
This implementation remained in place for version 2, 3, and 4.
However, I realised that I'd made a mistake, most targets simply use
frame_unwind_register_unsigned to unwind the $pc, and this throws an
error if the register value is optimized out or unavailable. My new
proposed implementation doesn't do this, I was going to end up
breaking many targets.
I considered duplicating the code from frame_unwind_register_unsigned
that throws the errors into my new default_unwind_pc, however, this
felt really overly complex. So, what I instead went with was to
simply revert back to using frame_unwind_register_unsigned. Almost
all existing targets already use this. Some of the ones that don't can
be converted to, which means almost all targets could end up using the
default.
One addition I have made over the version 1 implementation is to add a
call to gdbarch_addr_bits_remove. For most targets this is a no-op,
but for a handful, having this call in place will mean that they can
use the default method. After all this, the new default_unwind_pc now
looks like this:
CORE_ADDR
default_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
int pc_regnum = gdbarch_pc_regnum (gdbarch);
CORE_ADDR pc = frame_unwind_register_unsigned (next_frame, pc_regnum);
pc = gdbarch_addr_bits_remove (gdbarch, pc);
return pc;
}
gdb/ChangeLog:
* gdb/dummy-frame.c (default_dummy_id): Defined new function.
* gdb/dummy-frame.h (default_dummy_id): Declare new function.
* gdb/frame-unwind.c (default_unwind_pc): Define new function.
(default_unwind_sp): Define new function.
* gdb/frame-unwind.h (default_unwind_pc): Declare new function.
(default_unwind_sp): Declare new function.
* gdb/frame.c (frame_unwind_pc): Assume gdbarch_unwind_pc is
available.
(get_frame_sp): Assume that gdbarch_unwind_sp is available.
* gdb/gdbarch.c: Regenerate.
* gdb/gdbarch.h: Regenerate.
* gdb/gdbarch.sh: Update definition of dummy_id, unwind_pc, and
unwind_sp. Add additional header files to be included in
generated file.
|
|
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
Later patch needs two independent destructors for the same dummy_frame.
Therefore the registrar has been extended to an arbitrary number of
destructors.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* dummy-frame.c (struct dummy_frame_dtor_list): New.
(struct dummy_frame): Replace dtor and dtor_data by dtor_list.
(remove_dummy_frame): Process dtor_list.
(pop_dummy_frame): Process dtor_list.
(register_dummy_frame_dtor): Maintain dtor_list.
(find_dummy_frame_dtor): Handle dtor_list.
* dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
Update comments.
|
|
There was now a leak-like bug that if dummy_frame "disappeared" by
remove_dummy_frame then its destructor was not called. For example in the case
of 'compile code' dummy frames the injected objfile would never get freed after
some inferior longjmp out of the injected code.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile-object-run.c (do_module_cleanup): Add parameter
registers_valid.
(compile_object_run): Update do_module_cleanup caller.
* dummy-frame.c: Include infcall.h.
(struct dummy_frame): Update dtor comment.
(remove_dummy_frame): Call dtor.
(pop_dummy_frame): Update dtor caller.
* dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
registers_valid.
|
|
Both dummy_frame_dtor_ftype and call_function_by_hand_dummy_dtor_ftype
represent the same type, there was some mistake/duplication during check-in.
gdb/ChangeLog
2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
* dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
* infcall.c (call_function_by_hand_dummy): Use proper typedef for
dummy_dtor parameter.
* infcall.h: Include dummy-frame.h.
(call_function_by_hand_dummy_dtor_ftype): Remove.
(call_function_by_hand_dummy): Use proper typedef for dummy_dtor
parameter.
|
|
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
|
The compiler code needed a hook into dummy frame destruction, so that
some state could be kept while the inferior call is made and then
destroyed when the inferior call finishes.
This patch adds an optional destructor to dummy frames and a new API
to access it.
gdb/ChangeLog
2014-12-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* dummy-frame.c (struct dummy_frame) <dtor, dtor_data>: New
fields.
(pop_dummy_frame): Call the destructor if it exists.
(register_dummy_frame_dtor, find_dummy_frame_dtor): New
functions.
* dummy-frame.h (dummy_frame_dtor_ftype): New typedef.
(register_dummy_frame_dtor, find_dummy_frame_dtor): Declare.
|
|
This patch is to add ptid into dummy_frame and extend frame_id to
dummy_frame_id (which has a ptid field). With this change, GDB uses
dummy_frame_id (thread ptid and frame_id) to find the dummy frames.
Currently, dummy frames are looked up by frame_id, which isn't
accurate in non-stop or multi-process mode. The test case
gdb.multi/dummy-frame-restore.exp shows the problem and this patch can
fix it.
Test dummy-frame-restore.exp makes two inferiors stop at
different functions, say, inferior 1 stops at f1 while inferior 2
stops at f2. Set a breakpoint to a function, do the inferior call
in two inferiors, and GDB has two dummy frames of the same frame_id.
When the inferior call is finished, GDB will look up a dummy frame
from its stack/list and restore the inferior's regcache. Two
inferiors are finished in different orders, the inferiors' states are
restored differently, which is wrong. Running dummy-frame-restore.exp
under un-patched GDB, we'll get two fails:
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
With this patch applied, GDB will choose the correct dummy_frame to
restore for a given inferior, because ptid is considered when looking up
dummy frames. Two fails above are fixed.
Regression tested on x86_64-linux, both native and gdbserver.
gdb:
2014-06-27 Yao Qi <yao@codesourcery.com>
* breakpoint.c (check_longjmp_breakpoint_for_call_dummy):
Change parameter type to 'struct thread_info *'. Caller
updated.
* breakpoint.h (check_longjmp_breakpoint_for_call_dummy):
Update declaration.
* dummy-frame.c (struct dummy_frame_id): New.
(dummy_frame_id_eq): New function.
(struct dummy_frame) <id>: Change its type to 'struct
dummy_frame_id'.
(dummy_frame_push): Add parameter ptid and save it in
dummy_frame_id.
(pop_dummy_frame_bpt): Use ptid of dummy_frame instead of
inferior_ptid.
(pop_dummy_frame): Assert that the ptid of dummy_frame equals
to inferior_ptid.
(lookup_dummy_frame): Change parameter type to 'struct
dummy_frame_id *'. Callers updated. Call dummy_frame_id_eq
instead of frame_id_eq.
(dummy_frame_pop): Add parameter ptid. Callers updated.
Update comments. Compose dummy_frame_id and pass it to
lookup_dummy_frame.
(dummy_frame_discard): Add parameter ptid.
(dummy_frame_sniffer): Compose dummy_frame_id and call
dummy_frame_id_eq instead of frame_id_eq.
(fprint_dummy_frames): Print ptid.
* dummy-frame.h: Remove comments.
(dummy_frame_push): Add ptid in declaration.
(dummy_frame_pop, dummy_frame_discard): Likewise.
gdb/testsuite:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.multi/dummy-frame-restore.exp: New.
* gdb.multi/dummy-frame-restore.c: New.
gdb/doc:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Maintenance Commands): Update the output of
'maint print dummy-frames' command.
|
|
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
Remove stale dummy frames.
* breakpoint.c: Include dummy-frame.h.
(longjmp_breakpoint_ops): New variable.
(update_breakpoints_after_exec, breakpoint_init_inferior): Delete also
bp_longjmp_call_dummy.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(init_bp_location): Support bp_longjmp_call_dummy.
(set_longjmp_breakpoint): Use longjmp_breakpoint_ops. Comment why.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy, longjmp_bkpt_dtor): New
functions.
(initialize_breakpoint_ops): Initialize longjmp_breakpoint_ops.
* breakpoint.h (enum bptype): New item bp_longjmp_call_dummy. Delete
FIXME comment and extend the other comment for bp_call_dummy.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy): New declarations.
* dummy-frame.c: Include gdbthread.h.
(pop_dummy_frame_bpt): New function.
(pop_dummy_frame): Call pop_dummy_frame_bpt.
(dummy_frame_discard): New function.
(cleanup_dummy_frames): Update the comment about longjmps.
* dummy-frame.h (dummy_frame_discard): New declaration.
* gdbthread.h (struct thread_info): Extend initiating_frame comment.
* infcall.c (call_function_by_hand): New variable longjmp_b. Call
set_longjmp_breakpoint_for_call_dummy. Chain its breakpoints with BPT.
* infrun.c (handle_inferior_event) <BPSTAT_WHAT_CLEAR_LONGJMP_RESUME>:
Add case 4 comment. Call check_longjmp_breakpoint_for_call_dummy and
keep_going if IS_LONGJMP and there is no other reason to stop.
gdb/testsuite/
Remove stale dummy frames.
* gdb.base/call-signal-resume.exp (maintenance print dummy-frames)
(maintenance info breakpoints): New tests.
* gdb.base/stale-infcall.c: New file.
* gdb.base/stale-infcall.exp: New file.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
|
|
Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
|
|
Code cleanup.
* dummy-frame.c (dummy_frame_unwinder): Remove its static qualifier.
Rename to dummy_frame_unwind.
(dummy_frame_unwind): Remove.
* dummy-frame.h (dummy_frame_unwind): Reference directly the struct.
* frame-unwind.c (frame_unwind_init): Use address of
dummy_frame_unwind and inline_frame_unwind.
* frame.c (create_sentinel_frame): Use address of
sentinel_frame_unwind.
* inline-frame.c (inline_frame_unwinder): Rename to
inline_frame_unwind.
(inline_frame_unwind): Remove.
* inline-frame.h (inline_frame_unwind): Reference directly the struct.
* sentinel-frame.c (sentinel_frame_unwinder): Rename to
sentinel_frame_unwind.
(sentinel_frame_unwind): Remove.
* sentinel-frame.h (sentinel_frame_unwind): Reference directly the
struct.
|
|
Automatic update by copyright.sh.
|
|
caller_state.
(dummy_frame_push): Replace caller_regcache arg with caller_state.
All callers updated.
(remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
(dummy_frame_pop): Rewrite. Verify requested frame is in the
dummy frame stack. Restore program state.
(cleanup_dummy_frames): Rewrite.
(dummy_frame_sniffer): Update. Make static.
* dummy-frame.h (regcache,frame_info): Delete forward decls.
(inferior_thread_state): New forward decl.
(dummy_frame_push): Update prototype.
* frame.c (frame_pop): dummy_frame_pop now does all the work for
DUMMY_FRAMEs.
* infcall.c (breakpoint_auto_delete_contents): Delete.
(get_function_name,run_inferior_call): New fns.
(call_function_by_hand): Simplify by moving some code to
get_function_name, run_inferior_call. Inferior function call wrapped
in TRY_CATCH so there's less need for cleanups and all exits from
proceed are handled similarily. Detect program exit.
Detect program stopping in a different thread.
Make error messages more consistent.
* inferior.h (inferior_thread_state): Declare (opaque type).
(save_inferior_thread_state,restore_inferior_thread_state,
make_cleanup_restore_inferior_thread_state,
discard_inferior_thread_state, get_inferior_thread_state_regcache):
Declare.
(save_inferior_status): Update prototype.
* infrun.c: (normal_stop): When stopped for the completion of an
inferior function call, verify the expected stack frame kind.
(inferior_thread_state): New struct.
(save_inferior_thread_state,restore_inferior_thread_state,
do_restore_inferior_thread_state_cleanup,
make_cleanup_restore_inferior_thread_state,
discard_inferior_thread_state,
get_inferior_thread_state_regcache): New functions.
(inferior_status): Move stop_signal, stop_pc, registers to
inferior_thread_state. Remove restore_stack_info.
(save_inferior_status): Remove arg restore_stack_info.
All callers updated. Remove saving of state now saved by
save_inferior_thread_state.
(restore_inferior_status): Remove restoration of state now done by
restore_inferior_thread_state.
(discard_inferior_status): Remove freeing of registers, now done by
discard_inferior_thread_state.
* gdb.base/break.exp: Update expected gdb output.
* gdb.base/sepdebug.exp: Ditto.
* gdb.mi/mi-syn-frame.exp: Ditto.
* gdb.mi/mi2-syn-frame.exp: Ditto.
* gdb.base/call-signal-resume.exp: New file.
* gdb.base/call-signals.c: New file.
* gdb.base/unwindonsignal.exp: New file.
* gdb.base/unwindonsignal.c: New file.
* gdb.threads/interrupted-hand-call.exp: New file.
* gdb.threads/interrupted-hand-call.c: New file.
* gdb.threads/thread-unwindonsignal.exp: New file.
|
|
|
|
(struct frame_id): Remove declaration.
|
|
* dummy-frame.c: Include "observer.h".
(dummy_frame_push): Do not check for stale frames.
(dummy_frame_pop): New function.
(cleanup_dummy_frames): New function.
(_initialize_dummy_frame): Install it as inferior_created observer.
* frame.h (struct frame_id): Update comments.
(frame_id_inner): Remove prototype.
* frame.c (frame_id_inner): Make static. Add comments.
(frame_find_by_id): Update frame_id_inner safety net check to avoid
false positives for targets using non-contiguous stack ranges.
(get_prev_frame_1): Update frame_id_inner safety net check.
(frame_pop): Call dummy_frame_pop when popping a dummy frame.
* stack.c (return_command): Directly pop the selected frame.
* infrun.c (handle_inferior_event): Remove dead code.
* i386-tdep.c (i386_push_dummy_call): Update comment.
|
|
|
|
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
|
|
|
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
|
|
* dummy-frame.c: Include "gdb_string.h".
(generic_save_call_dummy_addr, generic_push_dummy_frame)
(generic_save_dummy_frame_tos): Delete.
(dummy_frame_push): New function, replaces above.
* dummy-frame.h: Update copyright.
(dummy_frame_push): Declare.
* frame.h (generic_save_dummy_frame_tos, generic_push_dummy_frame)
(generic_save_call_dummy_addr): Delete declarations.
* infcall.c: Include "dummy-frame.h".
(call_function_by_hand): Add locals caller_regcache,
caller_regcache_cleanup and dummy_id. Replace push_dummy_frame
with call to frame_save_as_regcache plus cleanup. Delete calls to
generic_save_call_dummy_addr and generic_save_dummy_frame_tos.
Move clear_proceed_status to just before the resume, add call to
dummy_frame_push (discard cleanup).
* Makefile.in (infcall.o): Add $(dummy_frame_h).
(dummy-frame.o): Add $(gdb_string_h).
|
|
2004-08-01 Andrew Cagney <cagney@gnu.org>
* dummy-frame.h (dummy_frame_unwind): Replace dummy_frame_sniffer.
* frame-unwind.c (frame_unwind_init): Use dummy_frame_unwind.
* dummy-frame.c (find_dummy_frame): Delete.
(struct dummy_frame_cache, dummy_frame_sniffer)
(dummy_frame_prev_register, dummy_frame_this_id)
(dummy_frame_unwinder, dummy_frame_unwind): Re-implement dummy
frame unwinder using a dummy_frame_cache.
|
|
* frame.c (deprecated_generic_get_saved_register): Delete
function, moved to "xstormy16-tdep.c".
* xstormy16-tdep.c (xstormy16_get_saved_register): Inline
deprecated_generic_get_saved_register from "frame.c".
(xstormy16_frame_saved_register): Call
xstormy16_get_saved_register.
* dummy-frame.c (deprecated_find_dummy_frame_regcache): Make
static.
* dummy-frame.h (deprecated_find_dummy_frame_regcache): Delete.
* frame.h (deprecated_generic_get_saved_register): Delete.
|
|
* sh64-tdep.c (sh64_init_extra_frame_info): Replace
DEPRECATED_CALL_DUMMY_LENGTH with 0, simplify.
* dummy-frame.h: Delete out-of-date comments.
* gdbarch.sh (DEPRECATED_CALL_DUMMY_LENGTH): Delete.
* gdbarch.h, gdbarch.c: Re-generate.
|
|
* frame.h (deprecated_pc_in_call_dummy): Rename
generic_pc_in_call_dummy.
* dummy-frame.h (pc_in_dummy_frame): Delete declaration.
* dummy-frame.c (deprecated_pc_in_call_dummy): Rename
generic_pc_in_call_dummy.
(pc_in_dummy_frame): Make static.
* gdbarch.sh (DEPRECATED_PC_IN_CALL_DUMMY): Update.
* gdbarch.h, gdbarch.c: Re-generate.
* dummy-frame.c (dummy_frame_sniffer): Simplify.
* frame.c (frame_type_from_pc): Call deprecated_pc_in_call_dummy.
(legacy_get_prev_frame): Ditto.
* inferior.h: Delete reference to generic_pc_in_call_dummy in
comment.
|
|
* frame-base.h (frame_base_p_ftype): Delete definition.
(frame_base_append_predicate): Delete declaration.
* frame-unwind.h (frame_unwind_p_ftype): Delete definition.
(frame_unwind_append_predicate): Delete declaration.
* frame-unwind.c (struct frame_unwind_table): Delete field "p".
(append_predicate): Delete parameter "p".
(frame_unwind_append_predicate): Delete function.
(frame_unwind_append_sniffer): Update call to append_predicate.
(frame_unwind_free): Delete function.
(_initialize_frame_unwind): Pass NULL as "free" to
register_gdbarch_data.
(frame_unwind_init): Append the dummy_frame_sniffer.
(frame_unwind_find_by_frame): Simplify.
* frame-base.c (struct frame_base_table): Delete field "p".
(append_predicate): Delete parameter "p".
(frame_base_append_predicate): Delete function.
(frame_base_append_sniffer): Update call to append_predicate.
(frame_base_free): Delete function.
(frame_base_find_by_frame): Simplify.
(_initialize_frame_base): Pass NULL as "free" to
register_gdbarch_data.
* x86-64-tdep.c (x86_64_frame_sniffer): Replace "x86_64_frame_p".
(x86_64_sigtramp_frame_sniffer): Replace
"x86_64_sigtramp_frame_p".
(x86_64_init_abi): Set the frame unwind sniffers.
* m68k-tdep.c (m68k_frame_sniffer): Replace "m68k_frame_p".
(m68k_sigtramp_frame_sniffer): Replace "m68k_sigtramp_frame_p"
(m68k_gdbarch_init): Set the frame unwind sniffers.
* i386-tdep.c (i386_sigtramp_frame_sniffer): Replace
"i386_sigtramp_frame_p".
(i386_frame_sniffer): Replace "i386_frame_p".
(i386_gdbarch_init): Set the frame unwind sniffers.
* avr-tdep.c (avr_frame_sniffer): Replace "avr_frame_sniffer".
(avr_gdbarch_init): Set the frame unwind sniffers.
* alpha-tdep.c (alpha_sigtramp_frame_sniffer): Replace
"alpha_sigtramp_frame_p"
(alpha_heuristic_frame_sniffer): Replace
"alpha_heuristic_frame_p".
(alpha_gdbarch_init): Set the frame unwind sniffers.
(alpha_dwarf2_init_abi): Ditto.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_sniffer): Replace
"alpha_debug_frame_p".
(alpha_mdebug_frame_base_sniffer): Replace
"alpha_mdebug_frame_base_p".
(alpha_mdebug_init_abi): Set the frame unwind sniffers.
* d10v-tdep.c (d10v_frame_sniffer): Replace "d10v_frame_p".
(d10v_gdbarch_init): Set the frame unwind sniffer.
* dwarf2-frame.c (dwarf2_frame_sniffer): Replace "dwarf2_frame_p".
(dwarf2_frame_base_sniffer): Replace "dwarf2_frame_base_p".
* dwarf2-frame.h (dwarf2_frame_sniffer): Replace "dwarf2_frame_p".
(dwarf2_frame_base_sniffer): Replace "dwarf2_frame_base_p".
* dummy-frame.c (dummy_frame_sniffer): Replace "dummy_frame_p".
* dummy-frame.h (dummy_frame_sniffer): Replace "dummy_frame_p".
|
|
* dummy-frame.h (deprecated_find_dummy_frame_regcache): Rename
generic_find_dummy_frame.
* dummy-frame.c (deprecated_find_dummy_frame_regcache): Update.
(deprecated_generic_find_dummy_frame): Update.
(deprecated_read_register_dummy): Update.
* frame.c (deprecated_generic_get_saved_register): Update.
|
|
* gdbarch.sh (DEPRECATED_REGISTER_SIZE): Rename REGISTER_SIZE.
(DEPRECATED_SIZEOF_CALL_DUMMY_WORDS): Rename
SIZEOF_CALL_DUMMY_WORDS.
(DEPRECATED_CALL_DUMMY_WORDS): Rename CALL_DUMMY_WORDS.
(DEPRECATED_FIX_CALL_DUMMY): Rename FIX_CALL_DUMMY.
(DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET): Rename
CALL_DUMMY_BREAKPOINT_OFFSET.
(DEPRECATED_CALL_DUMMY_START_OFFSET): Rename
CALL_DUMMY_START_OFFSET.
(DEPRECATED_CALL_DUMMY_LENGTH): Rename CALL_DUMMY_LENGTH.
* gdbarch.h, gdbarch.c: Re-generate.
* alpha-tdep.c, alphafbsd-tdep.c, arm-linux-tdep.c: Update.
* arm-tdep.c, avr-tdep.c, breakpoint.c, cris-tdep.c: Update.
* dummy-frame.c, dummy-frame.h, frv-tdep.c, gdbarch.c: Update.
* gdbarch.h, gdbarch.sh, h8300-tdep.c, hppa-tdep.c: Update.
* i386-tdep.c, ia64-tdep.c, infcall.c, inferior.h: Update.
* m68hc11-tdep.c, m68k-tdep.c, mcore-tdep.c: Update.
* mips-tdep.c, mn10300-tdep.c, ns32k-tdep.c: Update.
* rs6000-tdep.c, s390-tdep.c, sh-tdep.c, sol-thread.c: Update.
* sparc-tdep.c, target.c, v850-tdep.c, valops.c: Update.
* vax-tdep.c, x86-64-tdep.c, xstormy16-tdep.c: Update.
* config/ia64/tm-ia64.h, config/m68k/tm-vx68.h: Update.
* config/mips/tm-mips.h, config/pa/nm-hppah.h: Update.
* config/pa/tm-hppa.h, config/pa/tm-hppa64.h: Update.
* config/s390/tm-s390.h, config/sparc/tm-sp64.h: Update.
* config/sparc/tm-sparc.h: Update.
Index: doc/ChangeLog
2003-05-03 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Make
CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY_LENGTH,
FIX_CALL_DUMMY, CALL_DUMMY_BREAKPOINT_OFFSET and
CALL_DUMMY_BREAKPOINT_OFFSET deprecated.
Index: mi/ChangeLog
2003-05-03 Andrew Cagney <cagney@redhat.com>
* mi-main.c (mi_cmd_data_write_register_values): Replace
REGISTER_SIZE with DEPRECATED_REGISTER_SIZE.
Index: testsuite/ChangeLog
2003-05-03 Andrew Cagney <cagney@redhat.com>
* gdb.base/watchpoint.exp: Rename CALL_DUMMY_BREAKPOINT_OFFSET to
DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET in comments.
|
|
* gdbarch.sh (FIX_CALL_DUMMY): Change to function with predicate.
* gdbarch.h, gdbarch.c: Regenerate.
* inferior.h (FIX_CALL_DUMMY): Delete macro.
* valops.c (hand_function_call): Only call FIX_CALL_DUMMY when
available.
* frame.h (generic_fix_call_dummy): Delete declaration.
* dummy-frame.h: Update comment.
* dummy-frame.c (generic_fix_call_dummy): Delete function.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Do not set
fix_call_dummy.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* s390-tdep.c (s390_gdbarch_init): Ditto.
* mn10300-tdep.c (mn10300_gdbarch_init): Ditto.
* mcore-tdep.c (mcore_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* i386-tdep.c (i386_gdbarch_init): Ditto.
* h8300-tdep.c (h8300_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* d10v-tdep.c (d10v_gdbarch_init): Ditto.
* cris-tdep.c (cris_gdbarch_init): Ditto.
* avr-tdep.c (avr_gdbarch_init): Ditto.
* arm-tdep.c (arm_gdbarch_init): Ditto.
|
|
2003-03-23 Andrew Cagney <cagney@redhat.com>
* gdbarch.sh (DEPRECATED_FRAME_CHAIN): Replace FRAME_CHAIN.
(DEPRECATED_FRAME_CHAIN_VALID): Replace FRAME_CHAIN_VALID.
* gdbarch.h, gdbarch.c: Regenerate.
* valops.c (hand_function_call): Update.
* objfiles.h (DEPRECATED_FRAME_CHAIN_VALID): Update.
* frame.c (legacy_saved_regs_this_id): Update.
(legacy_get_prev_frame, get_prev_frame, legacy_frame_p): Update.
* dummy-frame.h: Update.
* config/sparc/tm-sparc.h (DEPRECATED_FRAME_CHAIN): Update.
* config/pa/tm-hppa.h (DEPRECATED_FRAME_CHAIN_VALID): Update.
* config/m68k/tm-vx68.h (DEPRECATED_FRAME_CHAIN): Update.
* config/m68k/tm-os68k.h (DEPRECATED_FRAME_CHAIN): Update.
* config/m68k/tm-sun3.h: Update.
* blockframe.c (inside_main_func, frame_chain_valid): Update.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Update.
* x86-64-tdep.c (x86_64_init_abi): Update.
* vax-tdep.c (vax_gdbarch_init): Update.
* v850-tdep.c (v850_gdbarch_init): Update.
* sparc-tdep.c (sparc_frame_chain, sparc_gdbarch_init): Update.
* sh-tdep.c (sh_gdbarch_init): Update.
* s390-tdep.c (s390_gdbarch_init): Update.
* rs6000-tdep.c (rs6000_frame_saved_pc): Update.
(rs6000_gdbarch_init, rs6000_frame_saved_pc): Update.
(frame_get_saved_regs): Update.
* ppc-linux-tdep.c (ppc_linux_init_abi): Update.
* ns32k-tdep.c (ns32k_gdbarch_init): Update.
* mn10300-tdep.c (mn10300_gdbarch_init): Update.
* mips-tdep.c (mips_gdbarch_init): Update.
* mcore-tdep.c (mcore_gdbarch_init): Update.
* m68k-tdep.c (m68k_gdbarch_init): Update.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Update.
* ia64-tdep.c (ia64_gdbarch_init): Update.
* i386-tdep.c (i386_frame_num_args, i386_gdbarch_init): Update.
* i386-interix-tdep.c (i386_interix_init_abi): Update.
(i386_interix_back_one_frame): Update.
* hppa-tdep.c (hppa_gdbarch_init): Update.
(hppa_init_extra_frame_info): Update.
* h8300-tdep.c (h8300_gdbarch_init): Update.
* frv-tdep.c (frv_gdbarch_init): Update.
* cris-tdep.c (cris_gdbarch_init): Update.
* avr-tdep.c (avr_gdbarch_init): Update.
* arm-tdep.c (arm_gdbarch_init): Update.
* alpha-tdep.c (alpha_gdbarch_init): Update.
Index: doc/ChangeLog
2003-03-23 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Algorithms, Target Architecture Definition):
Deprecate FRAME_CHAIN and FRAME_CHAIN_VALID.
|
|
* dummy-frame.h (dummy_frame_id_unwind): Delete declaration.
(dummy_frame_pc_unwind, dummy_frame_register_unwind): Ditto.
(struct frame_unwind): Declare opaque.
(dummy_frame_p): Declare function.
* dummy-frame.c (dummy_frame_id_unwind): Make static.
(dummy_frame_pc_unwind, dummy_frame_register_unwind): Ditto.
* dummy-frame.c: Include "frame-unwind.h".
(dummy_frame_p): New function.
(dummy_frame_unwind): New variable.
* frame.c: Include "frame-unwind.h".
(frame_pc_unwind, frame_id_unwind, frame_register_unwind): Update
to use the new unwind field.
(set_unwind_by_pc): Delete function.
(create_new_frame, get_prev_frame): Set unwind field using
frame_unwind_find_by_pc.
(trad_frame_unwind, trad_frame_unwinder): New variables.
* frame.h (trad_frame_unwind): Declare variable.
(frame_id_unwind_ftype): Delete declaration.
(frame_pc_unwind_ftype, frame_register_unwind_ftype): Ditto.
(struct frame_unwind): Declare opaque.
(struct frame_info): Replace the fields id_unwind, pc_unwind and
register_unwind with a single unwind pointer.
* frame-unwind.h, frame-unwind.c: New files.
* Makefile.in (SFILES): Add frame-unwind.c.
(frame_unwind_h): Define.
(COMMON_OBS): Add frame-unwind.o.
(frame-unwind.o): Specify dependencies.
(frame.o, dummy-frame.o): Update dependencies.
|
|
* frame.h (frame_id_unwind_ftype): Change type so that the frame's
ID back using a parameter.
* frame.c (frame_id_unwind): Update call.
(frame_saved_regs_id_unwind): Update.
* dummy-frame.c (dummy_frame_id_unwind): Update function.
* dummy-frame.h (struct frame_id): Add opaque declaration.
(dummy_frame_id_unwind): Update declaration.
|
|
* frame.h (frame_id_unwind): Declare.
(struct frame_info): Add fields id_unwind, id_unwind_cache_p and
id_unwind_cache.
(frame_id_unwind_ftype): Declare.
* frame.c (frame_id_unwind): New function.
(set_unwind_by_pc): Add unwind_id parameter. Initialized.
(create_new_frame, get_prev_frame): Pass id_unwind to
set_unwind_by_pc.
(frame_saved_regs_id_unwind): New function.
(frame_saved_regs_id_unwind): New function.
* dummy-frame.c (dummy_frame_id_unwind): New function.
(struct dummy_frame): Add field id.
(generic_push_dummy_frame): Initialize `id'.
* dummy-frame.h (dummy_frame_id_unwind): Declare.
|
|
* dummy-frame.c (pc_in_dummy_frame): New function.
(generic_pc_in_call_dummy): Call pc_in_dummy_frame.
(find_dummy_frame): Update comment.
(generic_pop_current_frame): Use get_frame_type.
* dummy-frame.h (pc_in_dummy_frame): Declare.
* frame.c (set_unwind_by_pc): Use pc_in_dummy_frame.
(create_new_frame): Use pc_in_dummy_frame.
(get_prev_frame): Use pc_in_dummy_frame.
(frame_saved_regs_register_unwind): Use get_prev_frame.
(deprecated_generic_get_saved_register): Use get_prev_frame.
|
|
* frame.c (frame_pc_unwind): New function.
(frame_saved_regs_pc_unwind): New function.
(frame_register_unwind): Pass unwind_cache instead of
register_unwind_cache.
(set_unwind_by_pc): Add unwind_pc parameter, set.
(create_new_frame): Pass frame->pc_unwind to set_unwind_by_pc.
(get_prev_frame): Ditto.
* frame.h (frame_pc_unwind_ftype): Declare.
(struct frame_info): Add pc_unwind, pc_unwind_cache_p and
pc_unwind_cache. Rename register_unwind_cache to unwind_cache.
(frame_pc_unwind): Declare.
* dummy-frame.c (dummy_frame_pc_unwind): New function.
(struct dummy_frame): Add comment mentioning that values are for
previous frame.
* dummy-frame.h (dummy_frame_pc_unwind): Declare.
* blockframe.c (file_frame_chain_valid): Use frame_pc_unwind.
(generic_file_frame_chain_valid): Ditto.
* stack.c (frame_info): Ditto.
|
|
* frame.c (set_unwind_by_pc): Use dummy_frame_register_unwind.
* dummy-frame.c (find_dummy_frame): Rename
generic_find_dummy_frame, make static. Return the dummy frame
instead of the regcache.
(generic_find_dummy_frame): Re-implement using find_dummy_frame,
(cached_find_dummy_frame): New function. Use find_dummy_frame.
(dummy_frame_register_unwind): Rename
generic_call_dummy_register_unwind. Use cached_find_dummy_frame.
* dummy-frame.h (dummy_frame_register_unwind): Rename
generic_call_dummy_register_unwind.
|
|
* blockframe.c: Include "dummy-frame.h".
(struct dummy_frame, dummy_frame_stack)
(generic_find_dummy_frame, deprecated_generic_find_dummy_frame)
(generic_pc_in_call_dummy, deprecated_read_register_dummy)
(generic_push_dummy_frame, generic_save_dummy_frame_tos)
(generic_save_call_dummy_addr, generic_pop_current_frame)
(generic_pop_dummy_frame, generic_fix_call_dummy)
(generic_fix_call_dummy, generic_call_dummy_register_unwind): Move
dummy frame code from here...
* dummy-frame.c: ...to here. New file.
* dummy-frame.h: New file.
(generic_call_dummy_register_unwind): Declare.
(generic_find_dummy_frame): Declare.
* Makefile.in (SFILES): Add dummy-frame.c.
(dummy-frame.o): Specify dependencies.
(dummy_frame_h): Define.
(COMMON_OBS): Add dummy-frame.o.
(blockframe.o): Update dependencies.
|
